High-precision clamping holders with internal coolant for extended tool life
Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.
Klemmhalter 72.5° DVVNN 2525 M16 for VN-- 1604 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a secure clamping solution for VN-- 1604 indexable inserts combined with a 72.5° cutting geometry and a standard 25 x 25 mm shank to improve process stability and reduce rework. Order the clamp holder directly via Metav Werkzeuge or consult our specialists for configuration and delivery from Emmerich. DVVNN 2525 clamp holder — Clamp holder for VN-- 1604 indexable inserts, 72.5° (Teknik Makina) DVVNN 2525 clamp holder designed for turning applications; secures VN-- 1604 indexable inserts with a compact 25 x 25 mm shank and a defined 72.5° cutting angle for repeatable machining results Compatible with VN-- 1604 indexable inserts 72.5° cutting angle for precise turning 25 x 25 mm shank for standard toolholders M16 clamping screw, robust metal construction Stability and machining accuracy for turning operations The DVVNN 2525 clamp holder offers a mechanically straightforward clamping principle that translates into consistent cutting depth and reduced vibration during turning. With a defined 72.5° approach angle, the geometry supports predictable chip formation and reliable insert seating. The holder’s 25 x 25 mm shank cross-section and 12.5 mm cutting head width provide compatibility with common toolpost setups and support stable tool overhangs, which in turn helps maintain surface finish and dimensional consistency in serial production. Robust clamping that extends insert life and uptime A solid clamping interface and an M16 fixation ensure axial and radial stability under typical finishing and semi-finishing feeds. The combination of a secure clamping mechanism and the specified 45 mm effective cutting height reduces micro-movements at the cutting edge, which lowers insert flank wear and can extend service intervals. The holder’s overall length of 150 mm and mass of 0.69 kg offer a balance between rigidity and practical handling on lathes and CNC turning centres; this improves tool life economy and reduces unplanned downtime. Practical fitment and supply reliability for workshops Designed for compatibility with the VN-- 1604 insert family, the component integrates into standard turning tool chains without special adapters, enabling quick setup and repeatable results across batches. The clean, pragmatic design simplifies insertion and torqueing of the clamping screw while the ISO designation DVVNN 2525 makes reordering and tool management straightforward. Metav’s logistics and quality screening from Emmerich support dependable stock levels and a transparent supply process, helping procurement plan with confidence. For technical configuration or to secure a delivery from Metav Werkzeuge, request the DVVNN 2525 clamp holder through Metav’s sales team — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast dispatch from Emmerich Technical data Article number: D105-2TM Manufacturer: Teknik Makina ISO designation: DVVNN 2525 ECLASS: 21181004 Facts Shank width: 25 mm Shank height: 25 mm Cutting-head width: 12.5 mm Effective cutting height: 45 mm Overall length: 150 mm Weight: 0.69 kg Cutting angle: 72.5° Clamping thread: M16 Special features Compatible inserts: VN-- 1604 Designed for turning/indexable insert applications Robust mechanical clamping for repeatability Standard shank dimensions for easy integration FAQ What inserts fit this clamp holder? The DVVNN 2525 clamp holder is designed for VN-- 1604 indexable inserts, ensuring correct seating and stability for that insert family. What is the shank size and will it fit standard toolholders? The holder has a 25 x 25 mm shank cross-section, matching common toolpost and turret toolholders used in industrial turning setups. How does the 72.5° cutting angle affect machining? The 72.5° approach angle provides a predictable engagement geometry that supports controlled chip flow and consistent surface finish in turning applications. Which thread is used for the clamping screw? Clamping is executed via an M16 screw interface, offering a robust fixation compatible with standard clamping hardware. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 75° DCKNR 2525 M16 For CNMG 1606 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a robust combination of precision clamping, standard ISO compatibility and compact rigidity for consistent turning results; order directly via Metav Werkzeuge or consult the Metav team for application advice and supply reliability. Klemmhalter DCKNR 2525 — DCKNR holder for CNMG indexable inserts, right-hand, Teknik Makina The Klemmhalter DCKNR 2525 is a right-hand turning holder designed for CNMG 1606 indexable inserts, offering a 75° approach angle for general turning and semi-finishing operations DCKNR 2525 holder for CNMG 1606 inserts Right-hand configuration with 75° approach angle 25 × 25 mm shank with 32 mm head width 150 mm overall length, robust 0.576 kg mass Engineered for stable, predictable turning The holder is built around the DCKNR 2525 ISO form to accept CNMG 1606 indexable inserts, which are widely used for turning across workshops. The combination of a 25 × 25 mm shank and a 32 mm head width provides a rigid interface that reduces chatter and improves surface finish. The 75° cutting angle is beneficial for a balance between strength and accessibility at the cut, enabling reliable chip control in both medium and finishing passes. Where tool life and repeatability matter, this geometry delivers consistent cutting engagement and predictable tool behaviour. Secure clamping and machine-friendly dimensions Clamping is achieved with a standard M16 thread for the clamping screw, ensuring positive, repeatable fixation of the insert pocket that minimises micro-movement under load. A cutting height of 40 mm combined with a 150 mm overall length increases stiffness close to the insert while still allowing access to typical turning setups. The holder’s mass of 0.576 kg contributes to vibration damping without compromising balance. These measurable design choices are translated into practical benefits: reduced set-up iteration, improved surface integrity and longer insert life when used under the specified conditions. Quicker tool changes and lower inventory complexity Suppliers and workshop managers benefit from the holder’s ISO-aligned designation, which simplifies stock-keeping and replacement procedures. Standardisation to DCKNR 2525 and compatibility with CNMG 1606 inserts reduce the variety of spare parts required, allowing faster changeovers and less time spent searching for matching components. The mounting format and thread specification are compatible with a broad range of lathes and tool posts, so the holder can be integrated into existing tool families with minimal adjustment — a pragmatic advantage when optimising availability and production throughput. Supply assurance and trusted distribution for production Sourcing this turning holder through Metav Werkzeuge ensures access to a central European distribution hub and the logistics support of an experienced precision partner. Metav’s offering focuses on making accurate tools accessible to workshops and industry alike, backed by a large product range and a track record built on consistent availability. The holder’s industrial design is complemented by the supply chain reliability that keeps production lines stocked and reduces the risk of costly downtime. For precise turning applications that demand standardised compatibility and robust clamping, contact Metav Werkzeuge to discuss Teknik Makina’s DCKNR 2525 holder and arrange supply from Emmerich: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D162-3TM Manufacturer: Teknik Makina Type / designation: DCKNR for CNMG Indexable Inserts (DCKNR 2525) Dimensions & weight Shank height: 25 mm Shank width: 25 mm Head width: 32 mm Cutting height: 40 mm Overall length: 150 mm Weight: 0.576 kg Approach angle: 75° Compatibility & mounting Compatible inserts: CNMG 1606 ISO designation: DCKNR 2525 Clamping screw thread: M16 Cutting direction: Right-hand FAQ What insert type fits this holder? The holder accepts CNMG 1606 indexable inserts; the DCKNR 2525 form is matched to that insert geometry for correct seating and cutting clearance. Is the clamping screw a standard size? Yes, the clamping interface uses an M16 thread for the clamping screw, providing a standardised mounting that supports repeatable fixation. Which cutting direction is supported? This toolholder is configured for right-hand turning operations and is intended for installations where a right-hand cut is required. How does the 75° approach angle affect performance? The 75° approach angle balances cutting-edge strength and workpiece access; it enhances chip flow and reduces radial cutting forces compared with steeper geometries. Can this holder be used on most manual and CNC lathes? With its ISO designation and M16 clamping thread, the holder is compatible with a wide range of lathes and tool posts provided the machine accepts the shank and overall length dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 90° SCACR 1010 J06-F For CCMT 0602 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, standardised toolholder that combines secure clamping for CCMT 0602 inserts with a rigid 90° cutting geometry for stable, repeatable machining; order directly via Metav Werkzeuge or consult our advisors for compatibility and fast delivery. Klemmhalter SCACR-F – SCACR 1010 clamping holder for CCMT indexable inserts, right-hand, 90° The Klemmhalter SCACR-F is a 90° clamping holder designed for right-hand operations with CCMT 0602 indexable inserts, suited to confined setups and serial milling or turning tasks. Right-hand 90° cutting angle Compatible with CCMT 0602 inserts SCACR 1010 ISO designation Compact 110 mm overall length Precision clamping for consistent metal removal The compact clamping assembly provides a secure seat for indexable inserts, ensuring consistent chip formation and surface finish across repeated cycles. With a clear focus on process reliability, the right-hand holder and its 90° cutting angle minimise radial forces during face and shoulder operations, which reduces vibration and tool deflection. The standardised ISO designation supports predictable mounting and interchangeability, translating directly into lower rework rates and improved throughput in production runs. Small footprint, high rigidity — less overhang, more stability Engineered for tight tool layouts, the holder’s 110 mm overall length and modest cross-section (height and width 10 mm) reduce overhang and deliver elevated rigidity at the cutting zone. The low mass (0.104 kg) keeps centrifugal effects minimal while enabling quicker tool indexing and handling in automation cells. A compact toolholder like this preserves machine dynamics and helps maintain repeatable tolerances when space is limited or when multiple tools must be clustered on a turret or milling head. Fast insert changes and predictable setup times Designed for CCMT 0602 inserts, the SCACR-F style holder supports rapid insert replacement and consistent seating, which lowers operator time per change and shortens downtime between batches. The ISO SCACR 1010 identification and the bore reference J06-F facilitate correct selection and mounting within existing tooling systems. In process terms, this means fewer setup iterations and a steadier production flow — measurable improvements in efficiency for small and medium series manufacturing. For availability, delivery from Emmerich and application advice on the Technik Cutting Tools SCACR‑F clamping holder, contact Metav Werkzeuge for direct ordering or tailored consultancy. Technical Data SKU: D411TM Model: SCACR-F ISO designation: SCACR 1010 Compatible inserts: CCMT 0602 Facts Overall length: 110 mm Holder height: 10 mm Cutting-head width: 10 mm Holder width: 10 mm Weight: 0.104 kg Cutting angle: 90° Special features Cutting direction: right-hand Bore / shank reference: J06-F For indexable inserts: CCMT 0602 Bezeichnung (English): SCACR-F for CCMT Indexable Inserts FAQ Is this holder suitable for CCMT 0602 inserts? Yes. The Klemmhalter SCACR‑F is designed specifically for CCMT 0602 indexable inserts and provides the correct seat geometry for predictable cutting performance. What is the cutting direction and angle of the holder? The holder is configured for right-hand cutting with a 90° cutting angle, suitable for shoulder and face turning or similar operations. What are the main dimensions and weight? Overall length is 110 mm, height and width are 10 mm, and the unit weight is 0.104 kg. Which ISO designation and bore reference apply to this toolholder? ISO designation SCACR 1010 and bore/shank reference J06-F are specified for the SCACR‑F holder (SKU D411TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 90° SDACR 1010 J07-F für DCMT 0702 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, robust turning solution that pairs secure clamping with broad compatibility for DCMT 0702 inserts; the combination of a 90° approach and right‑hand orientation ensures repeatable results in demanding steelworking operations. Order directly through Metav Werkzeuge or consult our specialists for application support. SDACR-F for DCMT Indexable Inserts – SDACR 1010 Right‑hand Toolholder by Teknik Makina SDACR-F for DCMT Indexable Inserts is a 90° right‑hand turning holder designed for precision finishing and reliable clamping of DCMT 0702 indexable inserts in metal‑working applications Right‑hand orientation for standard turning 90° approach angle for predictable cutting Compatible with DCMT 0702 indexable inserts Compact 10 mm cross‑section for tight spaces Stable chip control and consistent cutting performance The holder is purpose‑engineered to provide secure clamping and minimal vibration during turning. With an ISO designation of SDACR 1010, the design centres the insert at a 90° approach, which supports a predictable cutting geometry and reduces the need for excessive tool adjustments between passes. This stability translates into fewer reworks and more consistent surface finishes when machining steels and similar materials. The clamping principle used allows the insert to be changed quickly, while the construction keeps repeatability within tight tolerances. Compact dimensions for accessible internal and external operations A modest cross‑section of 10 mm in height and width, combined with a total length of 110 mm, makes this toolholder suitable for confined setups and close‑shoulder work. The reduced profile permits better access where larger holders would interfere, enabling near‑shoulder turning and finish passes without compromising rigidity. The compact geometry also helps to lower overhang, which in turn reduces deflection and keeps the cutting edge engagement consistent during finishing operations. Built for workshop durability and practical handling Weighing 0.97 kg, the assembly feels balanced in the toolpost and is robustly dimensioned for everyday steelworking tasks. The right‑hand configuration supports conventional lathe setups and is compatible with the common DCMT 0702 insert format — an industry standard for small to medium cutting tasks. The toolholder’s shank designation J07‑F allows straightforward mounting in compatible tool posts; this straightforward integration reduces setup time and supports efficient changeovers on production lines and in jobbing workshops. Reliable supply and partner support from Metav Procuring the SDACR‑F through Metav Werkzeuge ensures dependable logistics and a pragmatic service offering. Metav’s presence in Emmerich acts as a quality filter for the European market, combining decades of metrology and tooling experience with a broad catalogue. For users evaluating compatibility or requiring application advice, technical guidance is available; the emphasis is on enabling dependable, repeatable machining results rather than on one‑off promises. For procurement guidance or detailed application advice on the Teknik Makina SDACR‑F toolholder, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific machining tasks Technical Data Article number: D434TM Manufacturer: Teknik Makina Type designation: SDACR‑F (ISO SDACR 1010) Suitable for inserts: DCMT 0702 indexable inserts Cutting direction: Right‑hand ECLASS: 21181004 Facts Height: 10 mm Width: 10 mm Cutting head width: 10 mm Overall length: 110 mm Weight: 0.97 kg Cutting angle: 90° Special features Right‑hand turning toolholder Compatible with DCMT 0702 Shank designation: J07‑F Brand: Teknik Makina FAQ What insert size fits this toolholder? The holder accepts DCMT 0702 indexable inserts; compatibility is stated on the SDACR‑F technical specification. Is the SDACR‑F suitable for finishing steel components? Yes — the SDACR‑F is designed for precision steelworking, offering a 90° approach for stable finishing passes. Can the holder be mounted in standard toolposts? Mounting is possible with toolposts that accept shanks with the J07‑F designation; the toolholder’s ISO type is SDACR 1010 for reference. Does the turning holder support left‑hand cutting? This variant is a right‑hand configuration; for left‑hand cutting, a different orientation must be selected. What is the overall length and how does that affect overhang? The overall length is 110 mm, which reduces overhang compared with longer holders and improves rigidity in many setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 90° SDACR 1212 J11-F for DCMT 11T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, rigid tool holder that combines secure clamping with straightforward compatibility for DCMT turning inserts; its 12 mm shank dimensions and 110 mm overall length support stable turning with minimal vibration. Order directly via Metav Werkzeuge or consult our specialists for application advice. SDACR-F for DCMT Indexable Inserts — Teknik Makina tool holder, right-hand, 90° SDACR-F for DCMT Indexable Inserts is a right-hand tool holder designed for 90° turning applications using DCMT 11T3 indexable inserts, suitable for compact turret setups and precise external turning. Right-hand 90° cutting orientation Holds DCMT 11T3 indexable inserts 12 mm shank height and width 110 mm overall length Stable cutting with compact geometry The SDACR-F is engineered to deliver precision in short-reach turning operations. With a rigid 90° cutting configuration and right-hand orientation, the holder reduces tool deflection during external turning, which improves surface finish and repeatability. The compact geometry of the clamping unit helps to keep overhang low, translating into less vibration and longer insert life. The design is particularly suited for medium-duty production where consistent part quality and predictable tool behaviour are essential. Clear compatibility and secure clamping Designed specifically for DCMT 11T3 turning inserts and identified as ISO SDACR 1212, the holder’s clamping seat and screw arrangement provide reliable insert retention under variable cutting forces. The 12 mm shank height and width create a balanced fit for common toolposts and turrets, while the overall length of 110 mm allows for compact machine setup without sacrificing access. These measurable specifications mean quick verification during tool selection and simpler tool inventory management on the shop floor. Practical benefits for everyday workshop use Weighing 0.135 kg, this tool holder is lightweight yet robust, making it easy to handle during tool changes and less demanding on automated tool changers. The secure clamping reduces the need for frequent re‑adjustment, lowering setup time and increasing spindle uptime. Supplied through Metav Werkzeuge’s quality-controlled distribution, the holder comes with traceable SKU referencing for procurement and inventory control, supporting reliable supply for repetitive turning tasks. Contact Metav Werkzeuge for tailored technical advice and to request a personalised quotation for the SDACR-F tool holder (SKU D440TM); phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: D440TM Manufacturer: Teknik Makina Designation: SDACR-F for DCMT Indexable Inserts ISO designation: SDACR 1212 Facts Overall length: 110 mm Shank height: 12 mm Shank width: 12 mm Cutting head width: 12 mm Weight: 0.135 kg Cutting angle: 90° Special features Suitable for DCMT 11T3 inserts Right-hand cutting direction ISO toolholder form SDACR 1212 Bezeichnung_2_en provided: SDACR-F for DCMT Indexable Inserts FAQ Which inserts fit this holder? The holder is designed for DCMT 11T3 indexable inserts; the seating and clamping geometry match that insert specification for secure retention. Is the holder right-hand or left-hand? This tool holder is configured for right-hand turning operations and a 90° cutting orientation, as specified by the SDACR form. What are the key dimensions to check for machine compatibility? Important dimensions are the 12 mm shank height and width and the 110 mm overall length; verify these against the turret or toolpost envelope. How heavy is the tool holder and what does that mean in practice? The holder weighs 0.135 kg, which makes it easy to handle during manual changes and reduces inertia on automatic changers while maintaining adequate rigidity. Can this holder be used for heavy interrupted cuts? The SDACR-F's compact design and secure clamping are intended for stable external turning; for heavy interrupted cuts, assess machine power and insert grade accordingly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 90° SDACR 1616 H11-F for DCMT 11T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the combination of a compact 16 x 16 mm shank, secure clamping for DCMT 11T3 inserts and a short 100 mm overall length to keep turning operations consistent and flexible; order the SDACR‑F directly via Metav Werkzeuge or request application advice from our consultants. SDACR‑F clamping holder (SDACR 1616) – right‑hand external turning, Teknik Makina A SDACR‑F clamping holder designed for secure right‑hand external turning with DCMT indexable inserts, suitable for general workshop and light production use. SDACR 1616 shank 16 x 16 mm Compatible with DCMT 11T3 inserts Right‑hand orientation, 90° cutting angle 100 mm overall length, 0.2 kg weight Consistent chip control through precision clamping The SDACR‑F is engineered to deliver consistent clamping and predictable tool geometry when used with DCMT 11T3 indexable inserts. The SDACR 1616 designation reflects the holder’s nominal shank dimensions, which are 16 x 16 mm, guaranteeing a standardised fit in compatible toolposts and reducing variation between set‑ups. A defined 90° cutting angle ensures stable cutting forces during external turning, which helps maintain surface finish and dimensional repeatability across a production run. For workshop managers seeking dependable repeatability, this compact toolholder balances rigidity and accessibility without complicating tooling inventories. Built for quick set‑up and repeatable accuracy Mechanical simplicity is the main advantage of this design: the clamping interface secures inserts reliably while enabling straightforward index changes. The holder’s compact form and H11‑F shank designation simplify mounting and alignment, shortening machine downtime during tool changes. With a 100 mm overall length and a mass of 0.2 kg, the assembly imposes minimal overhang, which reduces vibration potential and supports consistent cutting conditions. Reduced set‑up time translates directly into higher machine availability, especially in small to medium lot production where frequent tool swaps are normal. Versatile compatibility for everyday turning tasks Designed for right‑hand cutting, the toolholder is geared towards external turning and general finishing operations in workshop and light industrial settings. Its compatibility with the widely used DCMT 11T3 insert format makes the holder a practical choice for operations that value inventory simplicity: a single holder supports multiple grades and geometries of inserts. The compact head and standardised shank dimensions assist in compact tooling arrangements and make the holder suitable for constrained toolpost environments where accessibility and clear sightlines are important. Supplier assurance and streamlined procurement Supplied under SKU D442TM, this holder is part of a pragmatic tooling strategy that emphasises interchangeability and reliable performance. Specifying a standardised clamping holder reduces the need for multiple bespoke solutions and simplifies purchasing and maintenance cycles. Metav’s selection process and distribution from Emmerich act as an added quality filter for European customers, supporting consistent availability and traceable sourcing. For procurement teams, the combination of technical conformity and supply reliability reduces the risk of unexpected process variation while keeping toolroom complexity manageable. Request technical advice from Metav Werkzeuge to confirm the SDACR‑F’s suitability for the intended turning process — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Technical data Article number: D442TM SKU: D442TM Model: SDACR‑F for DCMT Indexable Inserts ISO designation: SDACR 1616 Manufacturer: Teknik Makina Facts Shank size: 16 x 16 mm Head width: 16 mm Holder width: 16 mm Overall length: 100 mm Weight: 0.2 kg Cutting angle: 90° Special features Compatible inserts: DCMT 11T3 Orientation: right‑hand Shank designation: H11‑F Suitable for external turning applications Compact design for reduced overhang FAQ What insert type fits this holder? The SDACR‑F clamping holder is compatible with DCMT 11T3 indexable inserts. Is the holder right‑hand or left‑hand oriented? This toolholder is manufactured for right‑hand cutting and external turning operations. What are the shank dimensions of the holder? The holder uses a 16 x 16 mm shank (SDACR 1616 specification). How long is the toolholder and what is its weight? The overall length is 100 mm and the unit weight is 0.2 kg. How can this holder be ordered or referenced? Order using SKU D442TM; consult Metav Werkzeuge for technical clarification or procurement advice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 90° SVJCR 1212 J11-F for VCMT 1103 Wendeplatten Innenkühlung rechtsschneidend - Teknik Makina
Benefit from a compact, rigid clamping solution that secures VCMT 1103 indexable inserts for consistent 90° shoulder cuts, while the 12 mm head minimises overhang and vibration; order the holder directly via Metav Werkzeuge or ask our consultants if needed. Klemmhalter (Clamping Holder) SVJC for VCMT Indexable Inserts — right-hand, 90° cutting, Teknik Makina Klemmhalter designed for secure clamping of VCMT 1103 indexable inserts in right-hand turning applications on CNC lathes SVJCR 1212 ISO designation Compatible with VCMT 1103 inserts 12 mm head for reduced overhang Right-hand cutting, 90° shoulder geometry Precision clamping for repeatable shoulder cuts The compact toolholder delivers a consistent 90° cutting angle, which is essential for producing precise shoulders and grooves with minimal rework. Designed around the SVJCR 1212 ISO form, the holder accepts VCMT 1103 indexable inserts and ensures firm positional stability during the cut. The reduced head dimensions—12 mm width and height—mean smaller overhangs and lower lever forces on the toolpost; this reduces vibration and improves surface finish. The right-hand orientation is optimised for standard lathe setups and is particularly suitable where repeatability and tight tolerances are required. By converting the geometric specifications into predictable machining results, cycle-time variability is reduced and downstream inspection is simplified. Faster setup and reliable toolholding for productive turning A pragmatic design focus gives quick insert changes without compromising clamp security, supporting efficient shift handovers and reduced spindle idle time. The holder’s overall length of 110 mm balances accessibility and rigidity, while a mass of 0.134 kg keeps inertial effects low for short, controlled cuts. The integrated boring-bar interface (designation J11-F) simplifies adaptation to common turret and bar systems. These features combine to lower setup overheads and cut non-productive minutes from each program change, improving throughput in both small-batch and serial production. The solid clamping mechanism translates into stable chip control and consistent tool life, which together support a predictable cost-per-component metric. Industrial compatibility and expert guidance for confident integration Built to work with widely used insert geometries, the holder fits into existing tooling pools without requiring radical changes to process parameters. The design emphasises compatibility—ISO coding, insert family and bar interface are all standardised—so the holder can be introduced with minimal qualification time. For complex materials or unusual cycle profiles, Metav’s specialists can advise on optimal insert grades and cutting data to match the holder’s mechanical advantages. The result is a pragmatic combination of mechanical rigidity, standardised interfaces and accessible assistance that reduces risk and helps sustain production quality over time. Contact Metav Werkzeuge today for tailored technical advice on the Teknik Cutting Tools clamping holder and to arrange supply directly from our Emmerich warehouse Technical data Article number: D460TM Manufacturer: Teknik Makina Core specifications Overall length: 110 mm Head width: 12 mm Head height: 12 mm Weight: 0.134 kg Cutting angle: 90° Cutting direction: Right Compatibility & design ISO designation: SVJCR 1212 For indexable inserts: VCMT 1103 Boring bar designation: J11-F Suitable for right-hand turning FAQ Which inserts are compatible with this holder? The holder accepts VCMT 1103 indexable inserts; the clamping geometry is optimised for that insert family. Is this holder for right- or left-hand cutting? This clamping holder is specified for right-hand cutting operations. What does the ISO code SVJCR 1212 indicate? SVJCR 1212 denotes the toolholder form and shank dimensions; it identifies the holder geometry and mounting style compatible with standard turret and bar setups. Can this holder produce true 90° shoulders? Yes — the holder’s 90° cutting angle and rigid clamping deliver predictable shoulder profiles when used with the matching VCMT insert and appropriate cutting data. Which machine interfaces are supported? The holder fits common turret and bar systems; the J11-F bore designation indicates compatibility with many bar adapters and turret mounts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 90° SVJCR 1616 H11-F for VCMT 1103 Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Compact, precise and simple to set up: the combination of the SVJCR 1616 ISO designation, compatibility with VCMT 1103 inserts and a compact 100 mm overall length supports stable turning cycles and efficient changeovers. Order the Klemmhalter directly via Metav Werkzeuge or ask our consultants if needed. Klemmhalter SVJC for VCMT Indexable Inserts by Teknik Makina — right-hand, compact 16 mm head The Klemmhalter is a right-hand clamping toolholder designed for turning operations with VCMT 1103 indexable inserts, offering a compact profile for use in workshop and production lathe set-ups. Toolholder SVJCR 1616 for VCMT 1103 inserts Right-hand orientation for standard turning 16 mm head width and 16 mm height 100 mm overall length, compact design Greater process stability through rigid clamping and proven geometry The SVJCR 1616 designation signals a standardised clamping geometry that secures VCMT 1103 indexable inserts with repeatable positioning; this results in reliable cutting behaviour and consistent component tolerances. The holder’s 90° cutting angle aligns insert forces to the toolpost, reducing chatter and helping to maintain surface finish over long runs. For production-oriented turning, the rigid interface between insert and body reduces rework and supports predictable tool life, which translates into lower overall machining costs. Fast integration into existing lathe setups for reduced downtime With a 100 mm overall length and compact 16 mm head dimensions, the toolholder slides into customary turret and toolpost layouts without excessive overhang, shortening set-up times and minimising interference. The right-hand orientation and shank reference H11-F make it compatible with common boring-bar fixtures and modular systems. At 0.202 kg, the component is light enough to avoid adding undue inertia yet robust enough to keep insert seating stable during turning operations, helping workshops and small production cells increase throughput. Low-maintenance design that supports reliable daily use Designed as a dedicated holder for indexable inserts, the unit keeps service requirements minimal: simple clamp access and standard screw interfaces permit rapid insert changes and orientation checks. The compact clamping head reduces the need for frequent repositioning, while standard ISO form ensures replacement and spare parts are straightforward to source. For industrial and craft environments requiring repeatable results, the holder offers a balance of durability, accessibility and cost-efficient operation, making it well suited to both single-shift workshops and continuous production lines. For supply, technical advice or a tailored quotation for the Teknik Makina SVJC clamping holder (SKU D462TM), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — support and reliable delivery from Emmerich are available on request. Technical Data Article number: D462TM Manufacturer: Teknik Makina Designation: SVJC for VCMT Indexable Inserts Dimensions and weight Head height: 16 mm Head width: 16 mm Body width: 16 mm Overall length: 100 mm Weight: 0.202 kg Cutting angle: 90° Compatibility and features Compatible with VCMT 1103 inserts ISO designation SVJCR 1616 Right-hand cutting orientation Boring bar designation H11-F Suitable for indexable inserts FAQ Which inserts fit this holder best? The Klemmhalter is designed for VCMT 1103 indexable inserts; the SVJCR 1616 form secures the insert reliably for turning applications. Is the holder for right-hand or left-hand machining? The toolholder is configured for right-hand cutting, indicated by the right-hand orientation in the product specification. What are the key dimensions and weight? The holder has a 16 mm head height and width, 100 mm overall length and a weight of 0.202 kg (SKU D462TM by Teknik Makina). What ISO designation does the holder use? The holder carries the ISO reference SVJCR 1616, which relates to the clamping geometry and insert seating form. Is the holder suitable for small workshop lathes? Yes. Its compact 100 mm length and modest mass make it suitable for workshop lathes and production turrets where space and stability are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° CKJNL 2020 K16 for KNUX 1604 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of the robust clamp design and compact head geometry for reliable left‑hand turning with indexable inserts; the result is stable chip control and predictable tool life that support efficient production. Order directly via Metav Werkzeuge or consult their technical team for specification checks. CKJNL 2020 clamping holder – for KNUX 1604 indexable inserts, left‑hand CKJNL 2020 is a left‑hand clamping holder engineered for turning applications with KNUX 1604 indexable inserts, offering a compact head and secure locking for repeatable set‑ups Left‑hand cutting direction Designed for KNUX 1604 inserts Compact head width 27 mm Secured with M6 locking screw Stable clamping for predictable machining results The solid clamping holder geometry provides consistent seating pressure and repeatable positioning, which reduces vibration and improves surface finish. The combination of a clearly defined cutting angle (93°) and a fixed cutting height (32 mm) ensures the insert sits at the intended tool centreline for left‑hand operations. With a secure M6 locking screw and dedicated clamp wedge (BK028), the assembly resists loosening under interrupted cuts, delivering measurable gains in process stability and reducing rejects. Space‑saving head that fits compact tool layouts A narrow head width of 27 mm and overall slim body (width 20 mm, height 20 mm) mean the holder integrates into tight turret pockets and short overhang applications. The modest overall length of 125 mm preserves rigidity while allowing access in confined work envelopes; this translates directly into higher achievable cutting parameters or longer tool life compared with bulkier assemblies. The design is particularly advantageous where tool clearance and compact fixturing are decisive for cycle‑time reductions. Serviceable modularity to keep production moving Service and replacement are straightforward thanks to standardised components: the clamp plate TA046, clamp plate screw M3x10, and the wedge BK028 are separate parts that can be swapped without disturbing the entire set‑up. The holder’s manageable mass (0.43 kg) simplifies handling during tool changes and reduces turret imbalance. For customers seeking straightforward retrofits, the holder accepts KNUX 1604 inserts and uses common fastening elements, which lowers spare‑part complexity and supports predictable maintenance planning. Contact Metav Werkzeuge for a detailed parts breakdown and to secure CKJNL 2020 clamping holders from Teknik Cutting Tools — phone +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: RD038TM ECLASS: 21181004 ISO designation: CKJNL 2020 Data Head width: 27 mm Body width: 20 mm Height: 20 mm Cutting height: 32 mm Overall length: 125 mm Weight: 0.43 kg Cutting angle: 93° Cutting direction: left Special features Fits KNUX 1604 indexable inserts Clamp plate: TA046 Clamp wedge: BK028 Clamp plate screw: M3x10 Locking screw: M6 Allen key size: 3 mm Designation for drill shank: K16 FAQ Which indexable inserts are compatible with this clamping holder? The CKJNL 2020 clamping holder is designed for KNUX 1604 indexable inserts and accepts the standard seat geometry for that insert family. Is the holder configured for left‑hand or right‑hand turning? This clamping holder is configured for left‑hand cutting direction; the seating and relief geometry are optimised accordingly. How is the insert clamped in the tool head? The insert is secured using the M6 locking screw together with the clamp wedge BK028 and clamp plate TA046, providing a firm and repeatable clamping interface. What is the manufacturer SKU for ordering and reference? The product is listed under SKU RD038TM and carries the ISO designation CKJNL 2020, supplied by Teknik Cutting Tools Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 93° CKJNR 2020 K16 For KNUX 1604 Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, ISO‑standard toolholder that combines compatibility with KNUX 1604 inserts and a stable, 93° cutting geometry for reliable shoulder turning; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. CKJN for KNUX Indexable Inserts — CKJNR 2020 toolholder, 93° right‑hand (Teknik Makina) The CKJN for KNUX Indexable Inserts is a right‑hand turning holder engineered for shoulder operations with KNUX 1604 inserts, offering a standard ISO shank and a rigid 93° head geometry Right‑hand holder, 93° cutting angle Fits KNUX 1604 indexable inserts Head width 27 mm, body width 20 mm Total length 125 mm, weight 0.434 kg Accurate shoulder turning thanks to a 93° geometry The 93° head geometry provides a clear benefit for precise shoulder cuts and close‑up turning operations. With a defined cutting angle of 93° and a right‑hand orientation, the holder supports controlled engagement of the insert, which reduces deflection during interruptive cuts and improves dimensional repeatability. The specified cutting height of 32 mm contributes to stable chip formation and predictable tool behaviour, helping to maintain surface finish and tolerance in serial production. Standardised shank and compact design for fast set‑up Adopting the CKJNR 2020 ISO designation means the holder aligns with common toolpost standards; the measured 20 x 20 mm shank (body width and holder height both 20 mm) enables straightforward machine set‑up and rapid changeover. The compact total length of 125 mm and 27 mm head width allow flexible positioning in confined tool stations while preserving the mechanical rigidity required for repeatable turning tasks. These dimensions simplify inventory management and reduce the need for bespoke fixturing on smaller lathes. Compatibility with KNUX inserts and robustness in production Designed for KNUX 1604 indexable inserts, the holder accepts the standard insert form for shoulder and finishing operations; the ISO interface ensures correct seating and orientation, which shortens tool change time and lowers rework risk. The holder’s mass of 0.434 kg supports stable dynamic behaviour without adding unnecessary load to the turret. The right‑hand cutting direction is optimised for conventional lathe orientations and common turning cycles on production lines. Practical benefits for workshop efficiency Using an ISO‑conforming holder reduces setup complexity: standardised dimensions and a defined shank profile mean fewer adapter requirements and quicker commissioning across multiple machines. The combination of rigid geometry and compatibility with widely used indexable inserts delivers tangible productivity gains — less vibration, fewer adjustments and more consistent part quality. For operations seeking predictable tool life and reduced downtime, integrating this holder into an organised tooling strategy is a pragmatic step. Contact Metav Werkzeuge for tailored advice on Teknik Makina toolholders and to confirm the ideal configuration for specific turning applications; technical consultants are available to assist with selection and supply from Emmerich. Technical data Article number: RD018TM Brand: Teknik Makina eClass: 21181004 ISO designation: CKJNR 2020 Dimensions & weight Total length: 125 mm Head width: 27 mm Body width: 20 mm Holder height: 20 mm Cutting height: 32 mm Weight: 0.434 kg Cutting angle: 93° Direction: Right‑hand Compatibility & features For indexable inserts: KNUX 1604 Shank designation: K16 ISO standard toolholder form: CKJNR 2020 FAQ What insert type fits this holder? The holder is designed for KNUX 1604 indexable inserts and seats them in the ISO interface specified by the CKJNR 2020 designation. Is this a right‑hand or left‑hand toolholder? This is a right‑hand holder with a 93° cutting angle, suited to conventional right‑hand turning operations. What are the key dimensions to check for machine compatibility? Important dimensions include the 20 x 20 mm shank profile, 125 mm total length and 27 mm head width; these determine fitment in standard toolposts and turret stations. Can the holder be used for heavy interrupted cuts? The rigid 93° geometry and specified cutting height promote stability for many shoulder operations; suitability for heavy interruptions depends on machine power and insert grade selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° DDJNR 2525 M11 for DN-- 1104 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Compact right-hand clamping toolholder combines precise insert seating and robust shank engagement for steady turning performance; its 150 mm length and 93° cutting angle support consistent chip flow and surface finish. Order the holder via Metav Werkzeuge or consult their specialists for application guidance. DDJNR 2525 clamping toolholder — right-hand, 150 mm (Teknik Makina) DDJNR 2525 is a right-hand clamping toolholder tailored for DN-- 1104 indexable inserts, engineered to deliver repeatable seating and dependable stability in medium-reach turning operations. Right-hand orientation for conventional turning ISO designation DDJNR 2525 Compatible with DN-- 1104 inserts Robust 150 mm overall length Consistent seating for repeatable machining quality The DDJNR 2525 design focuses on secure insert clamping and predictable tool geometry. With a precise seating interface for indexable inserts DN--1104, the holder minimises micro-movement at the cutting edge, which translates into improved surface finish and reduced scrap rates. The specification is particularly relevant where repeatability across batches is required, because a consistent clamping point reduces the need for frequent re-adjustment and aligns with shop-floor quality control processes. Geometry that enhances rigidity and chip control A compact overall length of 150 mm combined with a cutting angle of 93° and a head width of 32 mm gives the toolholder a favourable stiffness-to-reach ratio. The right-hand orientation supports conventional turning setups and encourages effective chip evacuation under typical feed and speed ranges. As a result, cycle-time stability and insert life benefit from less vibration and better heat dispersion — two practical gains that improve throughput and lower tooling costs over time. Secure mounting and straightforward integration The holder uses an M11 shank/thread designation (M11) for the clamping interface, ensuring robust engagement in compatible tool posts and adaptors. Its modest mass (approx. 0.751 kg) and a holder height of 25 mm make handling and fixturing simple without compromising rigidity. These attributes reduce setup effort and make the toolholder a reliable component in mixed-production workshops where rapid changeovers and stable fixturing are priorities. Built for professional turning applications and supply reliability Carrying the ISO designation DDJNR 2525, the toolholder is prepared for industrial turning contexts that require standardised interfaces and predictable performance. Compatibility with the DN-- 1104 insert family simplifies inventory management and speeds up maintenance procedures. Combined with dependable logistics from the supplier network, the holder supports continuous production rhythms and a pragmatic tool supply strategy. Contact Metav Werkzeuge in Emmerich to discuss application suitability or to reserve Teknik Cutting Tools' DDJNR 2525 clamping toolholder; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D168TM Manufacturer: Teknik Makina Model designation: DDJNR 2525 SKU: D168TM Facts Overall length: 150 mm Weight: 0.751 kg Cutting height: 30 mm Holder height: 25 mm Head width: 32 mm Width: 25 mm Cutting angle: 93° Direction: Right-hand Compatible insert: DN-- 1104 Shank/thread: M11 Special features ISO designation DDJNR 2525 For indexable inserts DN--1104 Right-hand orientation Designed for turning applications FAQ Is the holder compatible with DN-- 1104 inserts? Yes. The DDJNR 2525 clamping toolholder is specified for DN-- 1104 indexable inserts and provides the correct seating geometry for those plates. What is the overall length and how does it affect rigidity? Overall length is 150 mm; this length offers a balance between reach and stiffness, helping to maintain rigidity for typical turning tasks. Which thread or shank designation is used for mounting? Mounting uses an M11 shank/thread designation to ensure secure fixation in compatible tool posts and adaptors. What cutting direction does the holder support? The holder is configured for right-hand cutting direction, suitable for conventional right-hand turning operations. Does the product have an ISO or model designation for ordering? Yes. The holder is listed under DDJNR 2525, which can be referenced alongside SKU D168TM for procurement and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° DDJNR 2525 M15 for DN-- 1504 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a precision toolholder that pairs secure clamping with a compact 150 mm overall length and compatibility with DN-- 1504 indexable inserts; the robust DDJNR 2525 design ensures stable right-hand turning and repeatable results. Order the holder directly via Metav Werkzeuge or request advice from their consultants for integration guidance. Klemmhalter DDJNR 2525 — Indexable insert holder, right-hand, 150 mm — Teknik Makina A Klemmhalter DDJNR 2525 designed for right-hand turning, holding DN-- 1504 indexable inserts for reliable workshop and production use Right-hand turning configuration Compatible with DN-- 1504 inserts 150 mm overall length for compact set-ups Secure clamping with repeatable positioning Secure clamping for repeatable turning results The DDJNR 2525 toolholder is built as a precision indexable insert holder that prioritises secure clamping and positional repeatability. The DDJNR 2525 geometry fixes the insert positively in the pocket, reducing micro-movement during cuts. This stability translates into consistent part tolerances across batches and fewer interruptions for clamp retorquing, supporting steady production throughput and lowering rework rates. Geometry tuned for consistent chip control and tool life The toolholder’s profile, combined with a 93° cutting angle, promotes reliable chip control during right-hand turning operations. A correctly matched cutting geometry helps to direct chips away from the workpiece and insert seat, which reduces edge loading and supports longer insert life. Explaining the effect: a stable cutting angle means less vibration and steadier cutting forces, so insert wear becomes more predictable and maintenance planning more efficient. Compatibility and straightforward integration into existing toollines Designed for DN-- 1504 inserts and specified as ISO DDJNR 2525, this holder accepts standard indexable plates and mates with conventional clamping hardware. The M15 shank/thread designation and the 150 mm overall length allow straightforward mounting in many turret and toolpost arrangements. This compatibility minimises setup time when switching from other DDJNR-format holders and simplifies stocking decisions for workshops running common insert types. Robust build for daily workshop demands Constructed to withstand routine turning tasks, the holder’s mass of 0.763 kg provides a stable foundation for cutting dynamics without excessive bulk. Manufactured by Teknik Makina, the design balances rigidity and accessibility so that insert changes and screw access remain practical on the shop floor. Fewer adjustments and a reliable clamp interface contribute to predictable cycle times and less unplanned downtime. Suitable applications and measurable benefits This turning holder is primarily intended for medium-duty and production turning where right-hand cutting is required and DN-- 1504 inserts are preferred. The combination of repeatability and compatibility yields two clear benefits: reduced set-up variability and lower tooling inventory complexity. For operations seeking consistent part quality with familiar indexable plates, the holder offers a pragmatic, performance-oriented choice. Contact Metav Werkzeuge for tailored advice, stock availability and purchase coordination — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D169TM Manufacturer: Teknik Makina Product name: DDJNR for DN-- Indexable Inserts SKU: D169TM Core dimensions Overall length: 150 mm Weight: 0.763 kg Cutting height: 38 mm Holder height: 25 mm Head width: 32 mm Holder width: 25 mm Cutting angle: 93° Materials & compatibility ISO designation: DDJNR 2525 Compatible inserts: DN-- 1504 Cutting direction: right-hand Shank/thread designation: M15 Brand: Teknik Makina FAQ Which indexable inserts fit this holder? The holder is specified for DN-- 1504 indexable inserts; the DDJNR 2525 pocket accepts the standard DN-- 1504 form for secure seating. Is the holder suitable for left-hand cutting? This toolholder is configured for right-hand cutting; left-hand operations require an equivalent left-hand holder. How does the 93° cutting angle affect machining? A 93° cutting angle provides a stable approach for many turning tasks, improving chip control and reducing vibrations during right-hand cuts. What are the key mounting data to check before installation? Check the M15 shank/thread designation and the overall length of 150 mm to ensure correct fit in the turret or toolpost. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° DDJNR 3232 P15 for DN-- 1506 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from a robust combination of stiffness and compatibility: the toolholder delivers consistent stability with a 32 mm shank height and a 93° cutting angle, while accepting DN-- 1506 indexable inserts for efficient external turning. Order the holder directly via Metav Werkzeuge or consult the advisors for specification support. Klemmhalter DDJNR 3232 – Right‑hand turning toolholder for DN-- 1506 indexable inserts by Teknik Makina The Klemmhalter is a right‑hand turning toolholder engineered for external machining with DN-- 1506 indexable inserts and P15 boring bars, providing a compact solution for stable, repeatable turning operations. Right‑hand orientation for standard turning ISO DDJNR 3232 shank profile Suitable for DN-- 1506 indexable inserts 32 mm shank height; 170 mm overall length Consistent rigidity for dependable surface quality The holder has been engineered around a 32 mm shank height and a 32 mm shank width, giving a clearly measurable increase in rigidity compared with slimmer alternatives. This dimensional stability, together with a solid mass of 1.345 kg, reduces chatter and improves surface finish during external turning. The design concentrates stiffness close to the cutting zone so that insert life and repeatability benefit directly from lower vibration and a secure clamping interface. Compatibility and secure clamping for process reliability Designed to accept DN-- 1506 indexable inserts, the DDJNR 3232 format ensures a predictable seat and repeatable indexing. The 93° cutting angle and a cutting height of 35 mm are matched to common external turning geometries, enabling consistent chip formation and reliable tool engagement. The holder's interface with P15 boring bars supports stable tool overhang management, making setup times shorter and contributing to predictable machining results in serial and single‑part production. Compact dimensions that ease handling and integration With an overall length of 170 mm and a cutting‑head width of 40 mm, the toolholder balances reach and rigidity for tight set‑ups while maintaining accessibility for adjustment. Its right‑hand orientation and ISO DDJNR 3232 shank profile make it suitable for standard tool posts and fixtures. For workshops seeking to streamline turning operations, this holder offers measurable gains in machine uptime and setup consistency through straightforward compatibility and a robust mechanical design. For technical advice or to secure supply of this Teknik Makina DDJNR 3232 right‑hand toolholder, contact Metav Werkzeuge in Emmerich for immediate assistance: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: D174TM Manufacturer: Teknik Makina ISO designation: DDJNR 3232 Type: Klemmhalter For inserts: DN-- 1506 Facts Shank height: 32 mm Shank width: 32 mm Cutting head width: 40 mm Cutting height: 35 mm Overall length: 170 mm Weight: 1.345 kg Cutting angle: 93° Cutting direction: right Special features Accepts DN-- 1506 indexable inserts Boring bar designation: P15 Right‑hand orientation Compact DDJNR 3232 shank profile FAQ What inserts fit this toolholder? The toolholder is designed for DN-- 1506 indexable inserts; the DDJNR 3232 format provides a standard, repeatable seating for these inserts. Is the holder suitable for right‑hand turning only? Yes, the DDJNR 3232 holder is specified for right‑hand cutting direction, matching standard right‑hand turning operations. What are the key dimensions to check for machine compatibility? Important dimensions include a 32 mm shank height, 32 mm shank width, 170 mm overall length and a 40 mm cutting head width; these determine fixture and overhang requirements. Can this holder be used with P15 boring bars? The holder lists P15 as the compatible boring‑bar designation, enabling stable integration with corresponding bar systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° DVJNL 2525 M16 für VN-- 1604 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a compact, rigid toolholder that secures VN--1604 indexable inserts with precise 93° cutting geometry and a proven 25×25 mm shank for standard tool posts; order the component directly via Metav Werkzeuge or consult our specialists for application advice. DVJNL 2525 Clamping Holder — left-hand turning holder for VN--1604 indexable inserts (Teknik Makina) The DVJNL 2525 clamping holder is designed to secure VN--1604 indexable inserts for left-hand turning operations on lathes and machining centres. Shank 25×25 mm for standard tool posts Compatible with VN--1604 indexable inserts Left-hand cutting orientation Overall length 150 mm, rigid construction Reliable positioning for precision turning The DVJNL 2525 delivers consistent axial and radial positioning by combining a 25×25 mm shank with a 32 mm head width, ensuring stable insert support during interrupted cuts and heavy-duty turning. The 93° cutting angle provides a defined engagement geometry that simplifies toolpath planning and reduces the need for repeated set-ups. With a compact overall length of 150 mm and a mass of 0.427 kg, the holder offers a balance between reach and stiffness; this translates directly into improved surface finish and longer insert life when used in compatible left-hand applications. Clear specifications that simplify integration Designed specifically for VN--1604 indexable inserts, the toolholder uses an ISO designation of DVJNL 2525, which helps when checking compatibility with existing toolposts and turret systems. The 40 mm cutting height indicates the nominal distance from the mounting datum to the insert cutting edge, a key dimension when aligning toolholders to the machine centre height. The item also references an M16 clamping bar designation for the associated fastening components. These concrete measurements allow production planners and set-up technicians to verify fitment quickly and avoid costly trial-and-error on the shop floor. Practical advantages for workshop efficiency Incorporating this holder into a standard turning cell reduces set-up complexity: compatibility with a common insert type eliminates obscure tooling variants, while the standardised shank dimensions speed fixture selection. For operations that demand left-hand cutting, the dedicated orientation removes ambiguity in tool inventory. Metav Werkzeuge’s supply from Emmerich acts as a local quality filter for European customers, combining broad stock availability with technical support and reliable fulfilment—advantages that streamline procurement and operational continuity. Contact Metav Werkzeuge for precise application guidance on the Teknik Makina DVJNL 2525 clamping holder and to confirm suitability for specific turning tasks; our Emmerich-based team advises on tooling combinations and delivery options Technical data Article number: D344TM Manufacturer: Teknik Makina Designation: DVJN for VN-- 1604 Indexable Inserts ISO designation: DVJNL 2525 Facts Shank width: 25 mm Shank height: 25 mm Head width: 32 mm Cutting height: 40 mm Overall length: 150 mm Cutting angle: 93° Weight: 0.427 kg Cutting direction: left Special features Compatible with VN--1604 indexable inserts Clamping bar designation M16 Left-hand orientation Suited for lathe and turret turning applications FAQ Which insert type is compatible with this holder? The DVJNL 2525 clamping holder from Teknik Makina is specified for VN--1604 indexable inserts and accepts inserts made to that form factor. Can the holder be used for right-hand turning? No, this toolholder is manufactured for a left-hand cutting orientation; right-hand operations require a counterpart with the opposite orientation. What does the 40 mm cutting height refer to? The 40 mm value denotes the nominal distance from the holder’s mounting datum to the insert cutting edge, important for aligning the tool to the machine’s centre height. Is the shank size compatible with standard tool posts? Yes, the 25×25 mm shank corresponds to common square shank tool posts and turret slots used in many turning centres. What fastening thread is referenced for accessory components? The holder references an M16 clamping bar designation for the associated fastening components and fixtures. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 93° DVJNR 2020 K16 for VN-- 1604 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a secure 93° clamping geometry, proven compatibility with VN--1604 indexable inserts and compact dimensions for stable turning operations; order directly via Metav Werkzeuge or contact the technical advisers for delivery from Emmerich. Klemmhalter DVJN (DVJNR 2020) — 93° right‑hand clamping holder for VN--1604 indexable inserts by Teknik Makina The Klemmhalter DVJN is a right‑hand clamping holder designed for turning applications using VN--1604 indexable inserts, offering a compact 93° geometry for consistent seating and precise chip control in steel machining. 93° clamping geometry for secure seating Compatible with VN--1604 indexable inserts Right‑hand orientation for turning operations Compact 125 mm overall length for stability Consistent seating and reliable cutting performance The 93° clamping geometry delivers a secure seat for triangular VN--1604 inserts, reducing micro‑movement during engagement and improving repeatability in serial turning. Tight clamping prevents insert tilt that can lead to chatter; this stability translates into consistent surface finish and predictable tool life. For workshops focusing on steel machining, the holder’s orientation and geometry minimise downtime caused by insert re‑seating and tool correction. Designed for VN--1604 inserts and right‑hand turning Compatibility with VN--1604 indexable inserts ensures straightforward integration into existing tool systems, while the right‑hand configuration suits standard turning directions on most lathes. The ISO designation DVJNR 2020 indicates the shank and insert interface standard, simplifying tooling lists and spare part management. This compatibility reduces setup time and allows quicker changeovers between jobs, supporting efficient production workflows. Compact dimensions that enhance rigidity and control With an overall length of 125 mm and a moderate mass of 0.428 kg, the holder balances reach and rigidity; shorter overhang reduces deflection under load and improves dimensional accuracy. Key dimensions such as a holder height of 20 mm, cutting‑head width 27 mm and blade height 40 mm are engineered for secure mounting and efficient chip evacuation. These proportions help maintain cutting stability during medium‑duty steel operations and provide a dependable baseline for process planning. Practical benefits for everyday workshop use The clamping system accepts standard insert sizes and uses common mounting interfaces, reducing inventory complexity. The holder’s shank and indexable insert compatibility mean fewer special‑purpose tools are required, lowering total handling effort and simplifying employee training. Combined with Metav’s supply from Emmerich — where stock is curated with a European quality filter — the holder fits into workshops aiming to streamline procurement and maintain production reliability. For reliable 93° turning performance from Teknik Makina, request the DVJN clamping holder via Metav Werkzeuge for prompt dispatch from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to arrange delivery and technical clarification. Technical data Article number: D105-1TM Manufacturer: Teknik Makina Product: Klemmhalter DVJN for VN--1604 indexable inserts ISO designation: DVJNR 2020 Compatibility: VN--1604 Facts Overall length: 125 mm Holder height: 20 mm Holder width: 20 mm Cutting‑head width: 27 mm Cutting height: 40 mm Weight: 0.428 kg Cutting angle: 93° Cutting direction: right Special features For indexable inserts: VN--1604 Bore bar designation: K16 Right‑hand turning holder Compact design for reduced overhang FAQ Is this holder suitable for standard VN--1604 inserts? Yes. The Klemmhalter DVJN is specifically compatible with VN--1604 indexable inserts and is designed to accept that insert geometry reliably. What is the ISO designation of the shank? The shank corresponds to the ISO designation DVJNR 2020, ensuring standardised mounting and interchangeability within ISO‑based tooling systems. Which turning direction is this holder for? This holder is configured for right‑hand turning operations, matching the right‑hand cutting direction required by many lathe setups. How does the 93° angle affect machining? The 93° clamping geometry provides a robust seat for the insert, improving stability and reducing the risk of insert movement under cutting forces, which benefits finish and repeatability. Can the DVJN holder be used for general steel turning? Yes. The DVJN clamping holder from Teknik Makina is designed with dimensions and stability suited to steel turning tasks and integrates easily into workshop tooling systems (SKU D105-1TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° MTJNL 2525 M22 for TN-- 2204 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Compact left‑hand clamping holder with ISO MTJNL 2525 interface and 150 mm overall length – secure seating and consistent cutting height deliver predictable turning results. Durable dimensions and compatibility with TN-- 2204 indexable inserts support streamlined tool changes. Order the clamping holder directly via Metav Werkzeuge or ask the consultants for further technical alignment. Clamping holder MTJN (MTJNL 2525) — left‑hand holder for TN-- inserts by Teknik Makina A Clamping holder MTJN for TN-- indexable inserts designed for left‑hand turning in industrial lathe applications, offering a stable seat and standard ISO interface for repeatable performance Left‑hand turning for stable chip control ISO MTJNL 2525 interface for secure clamping Compatible with TN-- 2204 indexable inserts Robust 150 mm length, 25 mm shank width Precision and stability for consistent turning The clamping device is built to provide repeatable positioning and secure insert clamping. The ISO designation MTJNL 2525 ensures standardised seating for indexable inserts such as TN-- 2204, enabling fast index changes without loss of alignment. The combination of a 40 mm cutting height and a 93° cutting angle offers a predictable tool geometry that maintains chip flow and reduces malposition risks. By specifying the exact interface and dimensions, the holder removes ambiguity in tool selection and supports stable metal‑cutting cycles on conventional and CNC lathes. Simple integration with existing tool systems Designed for direct fitment into conventional tool posts, the holder features a M22 shank designation and a compact footprint that simplifies installation. The 150 mm overall length and a 25 mm shank width balance accessibility and rigidity, while the 32 mm cutting‑head width accommodates the insert size safely. These measured dimensions allow mechanical engineers and workshop planners to calculate overhang and stiffness in advance, improving process planning and minimising vibration‑related wear in medium‑ to heavy‑duty turning tasks. Robust build for efficient workshop operation At roughly 0.775 kg, the holder provides a solid mass that dampens resonant vibrations without adding unnecessary load to the turret. The holder’s geometry and clamping method reduce micro‑movement at the insert seat, which in turn extends the effective life cycle of the cutting edge and improves surface finish consistency. For production environments where tool change frequency and reproducibility are critical, the holder translates standardised interfaces into tangible operational benefits: shorter set‑up times, fewer rejects and a clearer maintenance schedule for cutting tools. Contact Metav Werkzeuge for tailored advice on the Teknik Makina MTJN clamping holder — stock and technical consultants are available from the Emmerich facility to assist with application matching and order placement Technical data SKU: D340TM Brand: Teknik Makina Article designation: MTJN for TN-- Indexable Inserts ISO designation: MTJNL 2525 Cutting direction: left Dimensions & weights Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting‑head width: 32 mm Cutting height: 40 mm Cutting angle: 93° Weight: 0.775 kg Compatibility & features For TN-- 2204 indexable inserts Shank designation: M22 Left‑hand turning ISO MTJNL 2525 interface FAQ What inserts fit this clamping holder? The clamping holder is specified for TN-- 2204 indexable inserts and is matched to the MTJNL 2525 interface for correct seating. Is the holder suitable for right‑hand turning? This holder is configured for left‑hand cutting direction; right‑hand cutting requires the corresponding mirrored holder. Which shank size is provided? The tool features a M22 shank designation and a 25 mm shank width for installation into compatible tool posts. How does the cutting height affect performance? A 40 mm cutting height defines the insert line relative to the workpiece; maintaining this height supports stable cutting geometry and consistent surface finish. Can this holder be used in CNC turret systems? The ISO MTJNL 2525 interface and standardised dimensions permit integration into many turret systems, subject to the turret's capacity and fixturing constraints. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 93° MTJNL 3232 P16 for TN-- 1604 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a robust clamping solution that combines precise insert compatibility, reliable geometry and a compact overall length for predictable turning cycles. Benefit from the left‑hand cutting configuration, a 32 mm clamping height and compatibility with TN--1604 indexable inserts — order directly via Metav Werkzeuge or consult the technical team for application advice. Clamping holder MTJNL 3232 — Left‑hand toolholder for TN--1604 indexable inserts by Teknik Makina The Clamping holder MTJNL 3232 is a left‑hand turning toolholder engineered for secure retention of TN--1604 indexable inserts in general turning applications. Left‑hand cutting direction Compatible with TN--1604 inserts Clamping height 32 mm Cutting head width 40 mm Total length 170 mm Secure clamping for consistent chip formation and longer insert life This toolholder delivers stable insert retention through a robust clamping geometry, ensuring repeatable seating and reduced micro‑movement at the cutting edge. The combination of a 32 mm clamping height and the holder's ISO designation MTJNL 3232 provides a predictable support platform for TN--type inserts, which in turn helps to maintain consistent cutting forces and surface finish. For workshops aiming to reduce rework and extend insert life, this holder offers a straightforward, technically sound solution that minimises vibration and supports efficient chip evacuation. Measured dimensions that simplify process planning With clearly defined dimensions — total length 170 mm, cutting head width 40 mm and an overall weight 1.36 kg — the holder can be integrated into existing tool setups with minimal adjustment. The 35 mm cutting height and a cutting angle of 93° support predictable tool offsets in CAM tables and on‑machine setup sheets. These numerical values allow process engineers to calculate overhang and rigidity, and to compare holders directly when specifying equipment for medium‑duty turning tasks. The left‑hand orientation is specified for matching spindle and tool post configurations in lathes that require left‑hand toolpaths. Practical integration into workshop workflows Designed for compatibility with the widely used TN--1604 insert family, the holder eases logistics and inventory management by aligning with common insert sizes. The P16 shank designation for the associated boring bar interface and the standard ISO labelling facilitate procurement and spare‑part planning. Metav’s sourcing and distribution model further supports rapid delivery from Emmerich, making the holder a pragmatic choice for production shops and subcontractors seeking dependable supply and a consistent quality filter for European markets. The robust construction and measured geometry make the holder suitable for both routine turning and short production runs where setup reliability is essential. Contact Metav Werkzeuge for tailored application advice or to request a specification review; representatives at Metav Werkzeuge can confirm compatibility with existing tool posts and provide ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D336TM Manufacturer: Teknik Makina Core technical data Clamping height: 32 mm Cutting head width: 40 mm Holder width: 32 mm Cutting height: 35 mm Total length: 170 mm Weight: 1.36 kg Cutting angle: 93° Cutting direction: left Special features and compatibility Compatible inserts: TN--1604 ISO designation: MTJNL 3232 Boring bar designation: P16 Type: MTJN for TN-- indexable inserts FAQ What inserts fit this holder? The clamping holder is compatible with TN--1604 indexable inserts; the designation MTJNL 3232 confirms the intended insert geometry and seating. Is the holder suitable for right‑hand turning? This version is configured for left‑hand cutting; a right‑hand variant would be required for opposite cutting directions. What are the key dimensions to check for machine setup? Important values are total length 170 mm, clamping height 32 mm and cutting head width 40 mm for assessing overhang and clearance. Can the holder be used for heavy stock removal? The holder offers solid clamping and predictable geometry; its suitability for heavy cutting depends on machine rigidity and insert grade rather than the holder alone. How is the holder identified in documentation? Refer to the SKU D336TM and the ISO designation MTJNL 3232 when ordering or documenting tool assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° MTJNL 3232 P22 for TN-- 2204 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a robust left-hand toolholder that combines secure clamping, a precise 93° cutting angle and compatibility with TN-- 2204 indexable inserts for reliable production runs; order the clamp holder directly via Metav Werkzeuge or consult their specialists for specification support. Klemmhalter — MTJN toolholder for TN-- indexable inserts, left-hand, 93° cutting angle (Teknik Makina) A Klemmhalter designed as a left-hand toolholder for turning operations, compatible with TN-- indexable inserts and intended for workshop and industrial lathe applications. Left-hand turning configuration Compatible with TN-- 2204 inserts 93° cutting angle for secure seating ISO MTJNL 3232 shank profile Precision and performance for reliable left-hand turning The clamp holder is engineered to provide repeatable results in series turning. Built around an MTJN shank compatible with TN-- 2204 inserts, the design prioritises secure clamping and tool stability. The 93° cutting angle promotes reliable insert engagement and reduces the risk of deflection during heavy cuts, which improves surface finish and dimensional control. For workshops that measure cycle time and reject rates, this configuration translates into fewer reworks and more predictable production output. Stable setup and easier handling in everyday machining With a compact footprint and clear ISO designation MTJNL 3232, the holder shortens setup time and simplifies tool change routines. The combination of a 40 mm cutting head width and a 32 mm body height increases rigidity without excessive mass, while the overall 170 mm length maintains accessibility in confined turret stations. This balance of dimensions keeps vibration low and contributes to repeatability across batches—valuable where consistent tolerances matter and throughput must be maintained. Compatibility, maintenance and workshop integration The toolholder is specified for left-hand operations and designed for use with standard indexable insert families, allowing integration into existing tooling inventories. The P22 bore/shank designation eases mounting in compatible boring bars or tool posts. Routine maintenance is straightforward: the clamping interface follows established geometries so inserts and clamping screws are swapped using common workshop tools, reducing downtime. For further technical clarifications or cutting data for specific materials, Metav Werkzeuge provides additional documentation and response via their technical channels. Select the Teknik Makina left-hand clamp holder for secure, repeatable turning — order through Metav Werkzeuge or request tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: D342TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Designation: MTJN for TN-- Indexable Inserts ISO designation: MTJNL 3232 Bore/shank designation: P22 Compatible inserts: TN-- 2204 Cutting direction: left Facts Overall length: 170 mm Holder height: 32 mm Cutting-head width: 40 mm Body width: 32 mm Cutting height: 40 mm Weight: 1.348 kg Cutting angle: 93° Special features Left-hand turning configuration Secure clamping interface ISO shank profile MTJNL 3232 Compatible with TN-- 2204 indexable inserts Bore designation P22 for mounting FAQ What insert types fit this toolholder? The clamp holder accepts TN-- 2204 indexable inserts; the MTJN geometry aligns with common TN-- insert profiles for stable engagement. Is the shank compatible with standard turret holders? Yes, the toolholder uses an MTJNL 3232 shank profile and a P22 bore designation, matching common turret and bar mount standards for easy installation. Can this holder be used for heavy roughing cuts? The left-hand toolholder from Teknik Makina is designed for robust clamping and a 93° cutting angle, which supports heavier cutting forces with reduced deflection when used with appropriate inserts. What length and dimensions should be considered for fixture planning? Key dimensions are overall length 170 mm, holder height 32 mm and cutting-head width 40 mm, useful for checking clearance and collision risk in turret layouts. Who supplies replacement or compatible inserts? Metav Werkzeuge lists compatible TN-- inserts and can advise on matching grades and geometries for the Teknik Makina clamp holder (SKU D342TM) Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° MTJNR 3232 P16 for TN-- 1604 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from rigid clamping, compatibility with TN-- 1604 indexable inserts and a stable 93° cutting angle to keep turning cycles consistent; order via Metav Werkzeuge or contact our consultants for tailored mounting advice. Clamping holder MTJN for TN-- Indexable Inserts (MTJNR 3232) — Right-hand, 32 mm height — Teknik Makina The clamping holder MTJN for TN-- Indexable Inserts is a right-hand toolholder designed for industrial turning applications with TN-- 1604 indexable inserts, offering a compact 32 mm profile for confined tool positions Compatible with TN-- 1604 inserts Right-hand cutting orientation ISO designation MTJNR 3232 Robust 32 mm height for tight setups Increased process stability through rigid clamping The holder’s rigid clamping geometry and its defined 93° cutting angle support predictable chip flow and repeatable tool engagement, which reduces vibration and improves surface finish. By fixing the insert securely in a dedicated pocket, the system minimises micro-movements during heavy cuts and interrupted cuts alike, translating into fewer rejects and longer uninterrupted production runs. The compact 32 mm profile also helps when tool clearance is limited, enabling a stable setup without sacrificing rigidity. Engineered compatibility for predictable performance Designed for TN-- 1604 indexable inserts and specified as MTJNR 3232, the unit matches common insert dimensions and seating faces to allow immediate integration into existing toollines. The right-hand orientation and standard shank designation P16 mean straightforward changeovers and consistent cutting geometry across multiple tool stations. This compatibility reduces setup time and simplifies inventory management, while the clearly defined interface supports consistent cutting parameters and tool life forecasting. Practical mounting and robust dimensions for shop floors With a total length of 170 mm and a compact head width of 40 mm, the holder fits a wide range of lathes and CNC turrets where space is constrained. The component’s mass of 1.36 kg contributes to its damping capacity, while the 35 mm insert height ensures sufficient engagement for finishing and semi-finishing passes. Where load distribution matters, the solid construction of the body and the standardised ISO form make clamping and replacement procedures fast and repeatable, lowering machine downtime and easing workshop logistics. How this holder improves production workflows Adopting this toolholder in series production simplifies process planning: stable cutting conditions, standardised insert use and a compact envelope result in fewer tool checks and faster cycle times. The design supports predictable wear patterns so tool-change intervals can be scheduled rather than reactive, improving OEE. For purchasing and maintenance teams, the use of a market-standard interface reduces the number of spare items required, supporting centralised stocking strategies and reliable supply from Metav Werkzeuge. Contact Metav Werkzeuge for individual mounting guidance and secure the Teknik Makina MTJN clamping holder (SKU D198TM) for enhanced turning stability and predictable tool life Technical data Article number: D198TM Manufacturer: Teknik Makina Designation: MTJN for TN-- Indexable Inserts ISO designation: MTJNR 3232 Facts Height: 32 mm Width (body): 32 mm Cutting-head width: 40 mm Insert height: 35 mm Total length: 170 mm Cutting angle: 93° Weight: 1.36 kg Cutting direction: right Special features Compatible inserts: TN-- 1604 Shank designation: P16 Right-hand toolholder Solid construction for stable clamping FAQ What inserts fit this holder? The Teknik Makina clamping holder MTJN for TN-- Indexable Inserts (SKU D198TM) is designed for TN-- 1604 indexable inserts and seats them in a standard ISO pocket for reliable positioning. Is the holder suitable for left-hand turning? This specific unit is manufactured for right-hand cutting; select a left-hand variant if left-handed tool orientation is required. What are the main dimensions to check for machine compatibility? Key values are head width 40 mm, body width 32 mm, height 32 mm and total length 170 mm; these determine envelope clearance and turret or toolpost fit. How does the 93° cutting angle affect machining? The 93° angle provides a near-orthogonal approach that improves edge stability and chip evacuation for many turning operations, reducing chatter and aiding surface finish. Who supplies mounting advice or technical data sheets? Metav Werkzeuge can provide technical guidance and documentation for the Teknik Makina MTJN holder (SKU D198TM) to ensure correct installation and parameter settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° PDJNL 2020 K15 For DNMG 1506 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Secure consistent turning performance through a combination of left‑hand orientation and compatibility with DNMG 1506 indexable inserts; the compact PDJNL 2020 design and solid K15 shank ensure reliable clamping and predictable chip control. Order the Klemmhalter PDJN for DNMG indexable inserts directly via Metav Werkzeuge or ask our consultants for application advice. Klemmhalter PDJN for DNMG Indexable Inserts — Left‑hand clamping holder, PDJNL 2020 (Teknik Cutting Tools) Klemmhalter is a left‑hand clamping holder engineered for turning operations with DNMG 1506 indexable inserts, offering compact dimensions for tight tool setups. Left‑hand cutting orientation Compatible with DNMG 1506 inserts ISO PDJNL 2020 designation Compact 125 mm overall length Accurate turning with stable clamping The holder delivers repeatable precision by combining a defined 93° cutting angle with a secure clamping interface for DNMG inserts. The left‑hand configuration supports machining strategies that require reverse cutting direction, improving chip evacuation in certain setups. Because the body is dimensioned for consistent seating and a fixed insert height, users benefit from predictable tool offsets and reduced rework — a practical advantage on mixed-production turning centres where setup time equates to cost. The PDJNL 2020 designation signals conformity with established ISO patterns, simplifying tool planning and reducing the need for guesswork when matching holders and inserts. Compact design for efficient toolroom workflows With an overall length of 125 mm and a balanced mass of 0.402 kg, this clamping solution occupies little space in a toolpost while keeping the cutting point rigid. The holder’s holder height 20 mm and holder width 20 mm, together with a cutting head width of 25 mm, make it suitable for tight clearances and multi‑station turrets. The short footprint shortens overhang, which reduces vibration and contributes to longer insert life; in practice this means fewer tool changes and steadier surface finishes. The K15 shank designation provides a clear reference for compatible tool posts and adapters. Built for compatibility and straightforward insert handling Compatibility with DNMG 1506 inserts is the core advantage: the geometry supports standard indexable‑insert practice and enables quick insert changes without complex adjustment. The holder’s cutting height 35 mm ensures the insert sits at a consistent datum relative to the workpiece; this minimises adjustments when switching between similar toolsets. The item is supplied in an ISO‑referenced form (PDJNL 2020), so procurement and inventory management are simplified — fewer SKU variations, clearer replacement processes and faster uptime for production runs. Proven supply and support from a precision partner Sourcing from a dependable supplier reduces procurement risk. Metav combines wide product availability with specialist advice, backed by a strong European logistics base. The practical consequence for workshops is predictable supply and access to application guidance when integrating the clamping holder into existing tool chains. If there is uncertainty about a specific turning task or setup, technical consultation is available to discuss insert grades, seat geometry and compatible adapters — helping to match the holder’s capability to the machining challenge while protecting productivity and component quality. For tailored technical advice on the PDJN clamping holder (P122TM) from Teknik Cutting Tools and to arrange supply via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and order coordination Technical data Article number: P122TM Manufacturer: Teknik Makina Article designation: PDJN for DNMG Indexable Inserts ISO designation: PDJNL 2020 Facts Overall length: 125 mm Holder height: 20 mm Holder width: 20 mm Cutting head width: 25 mm Cutting height: 35 mm Cutting angle: 93° Weight: 0.402 kg Cutting direction: Left Special features Compatible with DNMG 1506 inserts ISO designation PDJNL 2020 Shank designation K15 Left‑hand cutting orientation FAQ Which inserts fit this clamping holder? The holder is specified for DNMG 1506 indexable inserts; compatibility is reflected in the PDJN designation and the ISO PDJNL 2020 form. Is the clamping holder suitable only for left‑hand turning? The tool is designed with a left cutting direction; it is intended for left‑hand operations as indicated in the product data. What are the key mounting dimensions to consider? Refer to the main facts: overall length 125 mm, holder height 20 mm, holder width 20 mm and cutting head width 25 mm to ensure correct fitment in the turret or toolpost. How does the holder support consistent insert height and repeatability? The PDJNL 2020 geometry and the defined cutting height 35 mm provide a stable datum for insert seating, reducing the need for frequent height re‑adjustments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° PDJNR 2020 K15 for DNMG 1506 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, high‑rigidity clamping solution with a PDJNR 2020 ISO toolholder designed for DNMG 1506 inserts; the right‑hand orientation and 93° cutting angle ensure consistent chip control and stable turning operations — order directly via Metav Werkzeuge or consult the Metav team for application support. PDJN for DNMG Indexable Inserts (PDJNR 2020) — Right‑hand toolholder, 125 mm, Teknik Makina A robust PDJN for DNMG Indexable Inserts right‑hand toolholder engineered for secure seating of DNMG 1506 inserts; suitable for standard turning applications where repeatable clamping and machining stability are required PDJNR 2020 ISO toolholder For DNMG 1506 indexable inserts Right‑hand orientation, 93° cutting angle 125 mm overall length, 0.402 kg weight Consistent clamping for repeatable turning results The clamping assembly is designed to provide a rigid seat for indexable inserts, which reduces micro‑movement at the cutting edge and improves repeatability across batches. With a cutting head width of 25 mm and a holder height of 20 mm, the component geometry supports reliable insert bite and predictable tool life. This mechanical stability translates into fewer re‑set operations and more consistent part quality when using DNMG 1506 inserts in standard lathe set‑ups. Stable cutting geometry reduces set‑up time and scrap A 93° cutting angle combined with a right‑hand orientation brings the cutting forces into a familiar, neutral axis for most toolposts, improving balance and chip evacuation. The geometry helps maintain a steady contact zone between insert and workpiece, lowering chatter risk and enabling shorter set‑up cycles. The result is a tangible increase in process efficiency: fewer trial cuts, reduced scrap rates and improved surface finish without changing insert grades. Compact dimensions that enhance machine compatibility At 125 mm overall length and approximately 0.402 kg mass, the toolholder offers a compact footprint without compromising rigidity. The 35 mm cutting height provides suitable overhang control for typical turning tasks, while the modest mass helps preserve spindle dynamics on small to medium lathes. The K15 shank designation ensures compatibility with common clamping fixtures and toolpost interfaces, facilitating straightforward integration into existing workshop tooling arrays. Engineered for durable, low‑maintenance performance Constructed to the PDJNR ISO family, the holder incorporates proven clamping mechanics that simplify insert changes and maintain repeatable seating pressure over time. Materials and tolerances are chosen for durability under cyclic loading; as a consequence, frequency of adjustment and unscheduled maintenance is reduced. For production environments where uptime and predictability matter, this toolholder supports continuous operation with minimal intervention. For high‑rigidity turning with Teknik Cutting Tools' PDJN toolholder, contact Metav Werkzeuge for availability and application advice — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P110TM Manufacturer: Teknik Makina Facts Overall length: 125 mm Weight: 0.402 kg Holder height: 20 mm Cutting head width: 25 mm Cutting height: 35 mm Cutting angle: 93° Orientation: Right‑hand Suitable for: DNMG 1506 inserts ISO designation: PDJNR 2020 Shank designation: K15 Special features PDJN design for DNMG indexable inserts ISO PDJNR 2020 compatibility Secure clamping mechanism Compact, rigid construction FAQ What insert type is compatible with this toolholder? The holder is compatible with DNMG 1506 indexable inserts and is supplied in the PDJNR ISO family for that insert form. Is this a left‑hand or right‑hand toolholder? This toolholder is specified as right‑hand and features a 93° cutting angle for conventional turning orientations. Which shank or mounting specification applies? The holder uses a K15 shank designation suitable for standard toolpost clamping systems. What are the key dimensions to consider for set‑up? Important dimensions include 125 mm overall length, 20 mm holder height, 25 mm head width and 35 mm cutting height to ensure correct fit and overhang control. Can this toolholder be used in high‑volume production? The PDJN design, rigid clamping and ISO compatibility make the holder appropriate for repetitive production work where stable insert seating and low maintenance are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° PDJNR 2020 K15-IKG1/8 for DNMG 1506 Wendeplatten Innenkühlung rechtsschneidend - Teknik Makina
The product data for SKU AP110TM contains inconsistent information regarding compatible inserts: one entry specifies compatibility with DNMG 1506, while the shop title refers to DNMG 1104. This contradiction prevents a reliable, production-ready description. Please confirm which DNMG designation is correct and whether the holder is intended for right-hand turning with a 93° cutting angle and internal coolant, so that a complete, accurate specification can be prepared. Until this clarification is provided, no marketing or technical text will be generated to avoid potential misinformation. For a prompt resolution, please supply the correct insert size and any further missing technical confirmations by e‑mail or telephone: info@metav-werkzeuge.com / +49 2822 7131930 Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° PDJNR 2525 M15 for DNMG 1506 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the holder’s compatibility with DNMG 1506 inserts, its right-hand orientation and robust dimensions to improve clamping stability and repeatable turning results; order directly via Metav Werkzeuge or contact the technical team for integration advice. PDJN for DNMG Indexable Inserts (PDJNR 2525) — right-hand indexable insert holder by Teknik Cutting Tools A PDJN for DNMG Indexable Inserts indexable insert holder intended for right-hand turning applications, designed to accept DNMG 1506 inserts and to deliver stable, repeatable performance in standard lathe operations. Right-hand orientation for standard turning Compatible with DNMG 1506 inserts ISO designation PDJNR 2525 Robust 150 mm overall length Secure clamping for consistent machining performance The PDJNR 2525 form factor combines precise insert seating with a simple clamping principle to reduce micro‑movement during cuts. Designed for DNMG 1506 inserts, the holder promotes consistent edge engagement and a predictable chip flow, which helps to maintain surface finish and extend insert life. The right-hand configuration matches conventional spindle directions and machining setups, enabling straightforward integration into established tool palettes while reducing setup time and variability in production runs. Dimensions that favour rigidity and predictable cutting behaviour With an overall length of 150 mm, a head width of 32 mm and a shank width/height of 25 mm, the holder provides a compact yet rigid footprint that supports stable cutting forces. The cutting height of 38 mm and a cutting angle of 93° position the insert for effective tool engagement without excessive overhang, while a weight of 0.73 kg contributes to a solid feel in the toolpost. These measurable attributes translate into lower vibration and improved repeatability in turning operations, making the component suitable for routine workshop use and small-series production where dimensional consistency is required. Practical integration and procurement confidence The holder is specified with an M15 shank designation and the eClass reference 21181004, facilitating parts lists and procurement processes. Compatibility with DNMG 1506 inserts ensures that standard indexable grades and coatings can be used without modification to cutting strategy. Supplied as a right‑hand toolholder under the PDJNR 2525 ISO outline, it is suitable for shops seeking a straightforward replacement or addition to an existing toolset. For further technical clarification on mounting or to confirm fitment with specific toolposts, Metav Werkzeuge’s technical advisors are available to provide concise guidance and order handling. For procurement or technical consultation on the PDJN holder from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt supply and expert advice. Technical data SKU: P112TM Brand: Teknik Makina Article designation: PDJN for DNMG Indexable Inserts (PDJNR 2525) Facts Overall length: 150 mm Head width: 32 mm Shank width/height: 25 mm Cutting height: 38 mm Cutting angle: 93° Weight: 0.73 kg eClass: 21181004 Special features Compatible inserts: DNMG 1506 Cutting direction: right Shank designation: M15 ISO designation: PDJNR 2525 FAQ Is this holder compatible with DNMG 1506 inserts? Yes. The PDJN for DNMG Indexable Inserts (PDJNR 2525, SKU P112TM) is designed specifically for DNMG 1506 inserts and secures the cutting grade in the correct geometrical position for turning tasks. What is the intended cutting direction for this toolholder? The holder is manufactured for right‑hand cutting; the right-hand orientation aligns with standard spindle rotation for conventional turning operations. Which dimensions determine the holder’s rigidity? Key dimensions are the 150 mm overall length, 32 mm head width and 25 mm shank width/height; these values contribute to reduced overhang and improved stiffness during cuts. Can the holder be mounted on standard toolposts? The holder uses an M15 shank designation and the PDJNR 2525 ISO outline, which supports mounting on common toolpost systems when matched to appropriate clamping fixtures. Who manufactures this toolholder and where can spare parts be sourced? This item is produced by Teknik Cutting Tools and is supplied via Metav Werkzeuge; refer to SKU P112TM when enquiring for spares or replacements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° PDJNR 2525 M15-IKG1/8 for DNMG 1506 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, right-hand turning toolholder that combines secure clamping, internal coolant and a standard ISO shank for predictable production results; the combination of robust mounting and repeatable insert seating supports consistent cycle times and reduced rework. Order the clamping solution directly via Metav Werkzeuge or consult the specialists for application-specific advice. Clamping holder PDJN for DNMG indexable inserts – right-hand toolholder with internal coolant (Teknik Makina) The Clamping holder PDJN for DNMG indexable inserts is a right-hand turning toolholder engineered for secure retention of DNMG 1506 inserts, providing internal coolant and stable chip evacuation for metalcutting tasks Right-hand turning orientation Compatible with DNMG 1506 inserts Internal coolant supply Secure clamping with TH825 screw Engineered clamping for consistent turning results The PDJN-style clamping system delivers repeatable seating and reduced vibration because its geometry and clamping parts are matched to DNMG 1506 inserts. The combination of a secure clamping mechanism and the utilitarian cutting angle 93° creates a stable cutting line that supports predictable tool life and surface finish. Integrating internal coolant directly into the holder improves chip control and tool cooling at the cutting edge, which helps to maintain cutting parameters for longer runs and reduces the need for frequent interventions or premature insert changes. Faster setup and reliable interchangeability Designed for straightforward assembly, the toolholder accepts the ISO designation PDJNR 2525 adapter form and uses standard components — clamping screw TH825, clamp plate TA014-1, dowel TS-4 and knee lever TL4B — to ensure consistent clamping forces and simple part replacement. The compatible mount M15-IKG1/8 facilitates retrofit into common toolposts. These features translate into shorter changeover times and predictable alignment, so setup and index changes are faster and less error-prone than with non-standard holders. The compact dimensions and modular parts support efficient workshop logistics and inventory handling. Durable dimensions and workshop-ready construction With a 25 mm holder height, 40 mm cutting height and 150 mm overall length, the toolholder balances rigidity and reach for a wide range of turning operations. The head width of 32 mm and shank width of 25 mm provide a stable platform that resists deflection under load; the unit weight of 0.759 kg reflects a robust build without excess bulk. Right-hand orientation and the clear specification of components support transparent maintenance and parts ordering. Combined with Metav’s quality assurance for industrial supplies, this toolholder is suited to everyday workshop demands where reliability and consistent machining outcomes matter. Contact Metav Werkzeuge for tailored advice on Teknik Makina toolholders and to secure a clamping solution with internal coolant — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: AP112TM Product: Clamping holder PDJN for DNMG indexable inserts Manufacturer brand: Teknik Makina / Teknik Cutting Tools Cutting direction: Right-hand ISO designation: PDJNR 2525 Compatible inserts: DNMG 1506 Internal coolant: Yes Core measurements Height: 25 mm Cutting height: 40 mm Head width: 32 mm Shank width: 25 mm Overall length: 150 mm Weight: 0.759 kg Cutting angle: 93° Features & components Right-hand turning orientation Internal coolant supply Clamping screw TH825 Clamp plate TA014-1 Dowel TS-4 Knee lever TL4B Allen key: 3 Allen Mandrel designation: M15-IKG1/8 FAQ Which inserts fit this holder? The holder is specified for DNMG 1506 indexable inserts and is designed to seat those geometries reliably. Is the coolant routed through the toolholder? Yes — the toolholder provides internal coolant supply to the cutting zone to aid chip evacuation and temperature control. What is the ISO designation of the shank? The holder follows the PDJNR 2525 style for compatibility with standard toolposts and adapters. Which clamping components are used for installation? Assembly and clamping use the TH825 clamping screw, TA014-1 clamp plate, TS-4 dowel and TL4B knee lever for consistent retention. Can this toolholder be used for left-hand turning? This item is specified as a right-hand turning holder; left-hand operations require the corresponding left-hand version. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision coolant delivery for demanding turning operations
Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.
How they work and where they help most
Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.
Key facts
| characteristic | detail |
|---|---|
| category | tool holders with internal coolant |
| common synonyms | internal coolant toolholders; coolant-through tool holders |
| typical application | turning, heavy machining, internal bore finishing |
| coolant routing | internal channels and boreholes delivering coolant to the insert seat |
| key technical effect | direct cooling at the cutting edge, improved chip evacuation, reduced thermal load |
| comparison | standard holders use external nozzles; internal coolant holders route coolant through the shank |
Measurable benefits for production
- Direct coolant feed reduces the thermal stress on the insert, extending tool life.
- Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
- More consistent cooling helps achieve better surface finish and dimensional stability.
- Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.
Metav: precision supply and industrial competence
Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.
In short
Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.
FAQ
When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.
Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.
What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.
How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com