High-precision clamping holders with internal coolant for extended tool life
Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.
170mm Turning Holder DCLN for CN-- 1906, 95° cutting angle, left-cut, DCLNL 3232 - Teknik Makina
Introducing Turning Holder DCLNL 3232 by Teknik Makina The Turning Holder is a robust clamping solution for CN-- 1906 indexable inserts, designed for left-hand turning operations and precise metalcutting applications. Turning Holder by Teknik Makina Fits CN-- 1906 indexable inserts 170 mm overall length for deep reach 95° cutting angle for precise engagement 32 x 32 mm shank with 40 mm head width Precision and Stability for Demanding Turning Tasks For machining operations that demand repeatable results, this toolholder delivers Precision and Stability through its ISO designation DCLNL 3232 and compatibility with CN-- 1906 inserts. The 95° cutting angle promotes predictable tool engagement, which reduces unwanted deflection and helps maintain consistent surface finish. As a result, tool life and workpiece quality benefit from reduced vibration and controlled chip flow, supporting efficient production cycles. Design features that increase reach and rigidity Built with a 170 mm overall length and a compact shank of 32 x 32 mm, the holder balances reach and rigidity for external turning or operations that require deeper access. The 40 mm cutter-head width provides a stable mounting area for the insert seat, simplifying setup and alignment. These dimensional choices enable secure clamping and make the toolholder suitable for job-shop environments where quick, reliable positioning is essential. Practical handling for workshop versatility Designed for left-hand cutting direction, the holder accepts indexable inserts and allows rapid insert changes without complex adjustments. The clamping concept and the ISO coding streamline replacement and inventory management, so technicians spend less time setting up tools and more time on productive machining. This practical approach supports both single-part manufacturing and small-batch production runs. Clear compatibility and application advice This toolholder is intended for turning operations that use CN-- 1906 indexable inserts and benefits installations where a defined cutting angle and solid clamping interface matter. The ISO code and second designation P19 assist in selecting matching components and spare parts. For users seeking reliable interchangeability and straightforward identification, the standardized designation makes procurement and maintenance simpler. We recommend Teknik Makina’s Turning Holder for precision turning tasks — for expert advice and to confirm suitability please contact METAV Werkzeuge at info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271 Turning Holder Manufacturer: Teknik Makina SKU: D307TM Compatible Inserts: CN-- 1906 Overall Length: 170 mm Weight: 1.43 kg ISO Designation: DCLNL 3232 Secondary Designation: P19 Shank Width: 32 mm Shank Height: 32 mm Cutter Head Width: 40 mm Cutting Angle: 95° Cutting Direction: left GTIN: 4061905151477 Manufacturer or Manufacturer for English: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person or Responsible Person for English: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina and what should I consider? The Turning Holder from Teknik Makina is designed for CN-- 1906 indexable inserts; ensure the insert geometry and grade match the intended material and the left-hand cutting setup to achieve optimal performance. Can the Turning Holder by Teknik Makina be used for deep shoulder turning? Yes, the Turning Holder by Teknik Makina, with its 170 mm overall length and 32 x 32 mm shank, is suitable for operations that require extended reach, provided CN-- 1906 inserts are appropriate for the task. How does the DCLNL 3232 designation help with selecting tooling? The ISO designation DCLNL 3232 on this Turning Holder identifies shank size and mounting style, simplifying the selection of compatible holders and spare parts when ordering from Teknik Makina or suppliers. Who can I contact if unsure whether the Turning Holder meets my requirements? If you are unsure whether the Turning Holder from Teknik Makina fits your requirements, METAV Werkzeuge offers expert consultation — reach out via info@metav-werkzeuge.com or call +49 2822 7131930 for personalized support. 95° Left-Cut Turning Holder DCLNL 3232 for CN-- 1906, 170mm Length - Teknik Makina
170mm Turning Holder DDNNN for DN-- 1506 Indexable Inserts, DDNNN 3232, 62.5° - Teknik Makina
Turning Holder (DDNNN for DN-- 1506 Indexable Inserts) by Teknik Makina A Turning Holder designed for secure clamping of DN-- 1506 indexable inserts, offering extended reach and consistent performance in metal turning applications. Compatible with DN-- 1506 indexable inserts ISO designation DDNNN 3232 for secure fit 170 mm overall length for extended reach 62.5° cutting angle for improved chip flow Compact design for stable turning performance The Turning Holder is engineered to deliver reliable rigidity during cutting, reducing chatter and improving surface finish. Its compact cross-section and precise machining ensure consistent contact between insert and workpiece, which translates into repeatable dimensional accuracy. This stability benefits short to medium production runs by lowering rework rates and increasing throughput. Precise compatibility and cutting geometry that aids productivity Built to accept DN-- 1506 indexable inserts with the ISO DDNNN 3232 designation, the holder’s 62.5° cutting angle promotes controlled chip formation and efficient evacuation. For users less familiar with tool geometry, a steeper cutting angle helps prevent built-up edge and supports smoother cutting on a variety of steels, resulting in longer effective insert life and more predictable machining cycles. Designed for workshops and production-oriented shops Workshops and OEM maintenance teams benefit from the holder’s straightforward specification and robust design. The 32 x 32 mm shank cross-section and clear designation reduce setup confusion and allow fast tool changes, lowering machine downtime. By focusing on secure clamping and reproducible positioning, the holder supports consistent part quality across batch runs and small-series production. Simple mounting and service for everyday use Assembly and insert replacement follow common industry practices, with the tool accepting the listed insert type and using the P15 clamping interface for reliable fixation. The 16 mm cutting head width provides a balance between rigidity and access for varied turning tasks, while maintenance mainly involves routine inspection and torque checks, keeping overhead low and tool availability high. For precision turning needs, trust Teknik Makina’s clamping expertise — contact METAV Werkzeuge for tailored advice and support at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Turning Holder Brand / Manufacturer: Teknik Makina SKU: D109TM Suitable Inserts: DN-- 1506 Indexable Inserts ISO Designation: DDNNN 3232 Overall Length: 170 mm Width: 32 mm Height: 32 mm Cutting Head Width: 16 mm Cutting Angle: 62.5° Shank Designation: P15 Weight: 1.29 kg GTIN: 4061905150777 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed for DN-- 1506 indexable inserts, using the ISO DDNNN 3232 interface to ensure correct fit and secure clamping. What advantage does the 62.5° cutting angle of the Turning Holder provide? A 62.5° cutting angle supports improved chip flow and reduced built-up edge, which helps the Teknik Makina Turning Holder deliver more consistent surface finishes and longer insert life on common machining materials. Is the Turning Holder suitable for production environments? Yes, the Turning Holder by Teknik Makina is intended for workshop and production use, offering reproducible clamping and dimensions that reduce setup time and support batch machining. Who can I contact for technical questions about the Turning Holder? For technical assistance with the Turning Holder, METAV Werkzeuge provides expert support — reach out via info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice. 62.5° DDNNN 3232 Turning Holder for DN-- 1506 Indexable Inserts, 170 mm Length - Teknik Makina
170mm Turning Holder for CN-- 1204 Inserts, 95° DCLNR 3232 - Teknik Makina
Turning Holder (DCLN for CN-- Indexable Inserts) by Teknik Makina The Turning Holder DCLN for CN-- Indexable Inserts is a precision clamping tool engineered for right-hand turning with CN-- 1204 indexable inserts, offering robustness and repeatable geometry for metalworking applications. Fits CN-- 1204 indexable inserts Total length 170 mm for stable reach ISO designation DCLNR 3232 for compatibility 95° cutting angle for reliable cutting geometry Right-hand orientation for standard turning Stable clamping and durable construction for consistent results Designed for professional use, this toolholder provides a rigid clamping solution that maintains insert position under load. The DCLN design secures CN-- 1204 inserts with an ISO DCLNR 3232 interface, ensuring consistent tool geometry and repeatability across runs. For operators, this means fewer interruptions for adjustment and improved surface finish consistency. The 40 mm wide cutting head distributes forces effectively, reducing vibration and contributing to longer insert life. Optimised for workshop turning tasks with clear compatibility Workshops requiring reliable right-hand turning will benefit from the holder’s straightforward fitment and industry-standard dimensions. With a total length of 170 mm and a compact 32 mm × 32 mm shank, the tool balances reach and rigidity, enabling access to tighter bores while maintaining stability. Beginners can note that “indexable inserts” are replaceable cutting tips; they allow fast tool renewal without regrinding the entire tool, which increases uptime and simplifies inventory management. Precise geometry and simple setup reduce downtime The 95° cutting angle provides a controlled cutting edge orientation that supports predictable chip formation and tool engagement. Installation follows common clamping routines for DCLN systems: seat the insert, secure the clamp screw, and verify the axial alignment. Because the holder is produced to ISO designation DCLNR 3232, it integrates with existing toolpost setups and collet systems, minimising setup complexity and ensuring interchangeability in multi-tool operations. Choose Teknik Makina’s precision toolholding for dependable turning performance — for personalised advice or to confirm technical suitability, contact METAV Werkzeuge via eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or WhatsApp at +49 170 2837271 Technical Specifications Bezeichnung: Turning Holder Brand: Teknik Makina SKU: D164TM Suitable indexable inserts: CN-- 1204 Total length: 170 mm Weight: 1.379 kg ISO designation: DCLNR 3232 Secondary designation: P12 Shank width: 32 mm Shank height: 32 mm Cutting head width: 40 mm Cutting direction: Right Cutting angle: 95° GTIN: 4061905151354 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed to accept CN-- 1204 indexable inserts; these inserts match the DCLN clamping geometry and ensure correct seating and cutting orientation. Is the Turning Holder suitable for heavy-duty turning operations? Teknik Makina’s Turning Holder offers a robust clamp and a 40 mm cutting head width that help absorb cutting forces; for very heavy-duty removal rates, verify machine power and insert grade to match the intended application. How do I install an insert in the DCLN Turning Holder? To fit an insert in the Turning Holder, place a CN-- 1204 insert into the pocket, align it with the locating features, then tighten the clamp screw to the manufacturer’s recommended torque; this secures the insert for right-hand turning. Can METAV Werkzeuge provide additional technical advice for the Turning Holder? Yes, METAV Werkzeuge offers competent consultation for Teknik Makina toolholders; contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support and compatibility checks. 170mm DCLNR 3232 Turning Holder for CN-- 1204 Indexable Inserts, 95° - Teknik Makina
170mm Turning Holder for CN-- 1906 Inserts, DCLNR 3232, 95° - Teknik Makina
Turning Holder — Klemmhalter DCLNR 3232 by Teknik Makina The Klemmhalter Turning Holder secures CN-- 1906 indexable inserts for precise right-hand turning across workshop and production applications. DCLNR 3232 compatible with CN-- 1906 inserts 170 mm overall length for extended reach 95° cutting angle for optimal chip control 32 mm tool shank width and height for rigidity Right-hand orientation for standard turning operations Secure Seating for Repeatable Precision The Turning Holder is engineered to give a stable and vibration-resistant seat for indexable inserts. By combining the DCLNR 3232 ISO interface with a robust clamping geometry, the tool reduces micro-movements at the Insert and improves surface finish consistency. This design lowers the need for frequent re-adjustment and supports reliable results during medium- to high-volume turning tasks. Geometry That Delivers Stability and Reach With an overall length of 170 mm and a tool shank dimension of 32 mm x 32 mm, the holder provides the balance between reach and stiffness required in many turning operations. The 40 mm cutting-head width and the 95° cutting angle are optimized to maintain chip flow and tool clearance, while the right-hand orientation fits conventional lathe setups. These geometric choices translate into measurable improvements in tool life and process stability. Built for Workshop Use and Professional Machining This clamping tool targets machinists and production engineers who require dependable tooling for turning with CN-- 1906 inserts. The compact footprint and standardized ISO interface make the holder suitable for retrofit in existing toolposts and turret systems. For job shops and manufacturers seeking consistent cycle times, the holder supports repeatability without complex adjustments. Easy Handling, Clear Compatibility Installation is straightforward: the holder accepts CN-- 1906 indexable inserts and uses the clamping screw designation P19, ensuring a secure fit. For context, CN-- 1906 denotes a common Insert geometry and size used across many turning applications; choosing the correct grade and coating of the insert adapts the setup to material and cutting conditions. Proper seating and torque on the clamping screw provide best performance and safety during operation. Choose the Teknik Makina Klemmhalter for reliable precision in right-hand turning — for tailored advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271. Technical Data Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D166TM Compatible Inserts: CN-- 1906 ISO Designation: DCLNR 3232 Overall Length: 170 mm Tool Shank Width: 32 mm Tool Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Angle: 95° Cutting Direction: Right-hand Clamping Screw Designation: P19 Weight: 1.43 kg Availability: in Stock Condition: new GTIN: 4061905151392 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and what does CN-- 1906 mean? The Turning Holder (Klemmhalter) by Teknik Makina is designed for CN-- 1906 indexable inserts; CN-- 1906 denotes a standard insert shape and size used for a range of turning tasks, making it easy to source compatible grades for different materials. Is the Klemmhalter DCLNR 3232 suitable for heavy-duty turning? The Klemmhalter DCLNR 3232 from Teknik Makina offers a 32 mm shank and a solid clamping geometry that provide good rigidity; while it supports demanding operations, suitability for heavy-duty cutting depends on machine setup and chosen insert grade. How do I install the Teknik Makina Turning Holder and which clamping screw is required? Installation follows standard practice: secure the holder in the toolpost, use the specified P19 clamping screw to fix the insert, and ensure correct torque so the Klemmhalter functions reliably and safely during turning. Can METAV Werkzeuge advise on the right insert grade for the Klemmhalter? Yes — METAV Werkzeuge provides expert consultation for the Klemmhalter Turning Holder by Teknik Makina; contact their team for recommendations on insert grades, coatings and cutting data tailored to your material and process. 95° DCLNR 3232 Turning Holder for CN-- 1906 Inserts, 170mm - Teknik Makina
170mm Turning Holder for DN-- 1506 Indexable Inserts, 93° Left, DDJNL 3232 - Teknik Makina
Introducing the Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder (Klemmhalter) DDJNL 3232 is a robust clamping tool designed for precision external turning with DN-- 1506 indexable inserts. Turning Holder DDJNL 3232 from Teknik Makina For DN-- 1506 indexable inserts Overall length 170 mm for stable support Shank width 32 mm and height 32 mm for rigidity 93° cutting angle for accurate profile turning Consistent Precision through Stable Clamping The specially engineered clamping mechanism delivers consistent precision by holding DN-- 1506 indexable inserts firmly in position. With a 93° cutting angle, the tool minimizes deflection during external turning operations, which reduces tool chatter and improves surface finish. For customers unfamiliar with indexable tooling: indexable inserts are replaceable cutting tips that allow fast tool renewal without regrinding the holder, lowering downtime and keeping machining tolerances tight. Dimensions that Enhance Rigidity and Tool Life A shank width of 32 mm and height of 32 mm combined with an overall length of 170 mm provide a balanced profile that enhances rigidity during cuts. The cutter head width of 40 mm supports stable seating of the insert, translating into longer insert life and fewer interruptions for tool changes. These dimensions make the holder suitable for machines where stiffness and repeatable positioning are crucial factors. Designed for Clear Compatibility and Practical Use This turning holder is specified for DN-- 1506 inserts and carries the ISO designation DDJNL 3232, ensuring straightforward identification and replacement within a standardized tooling system. The left-hand cutting direction suits common external turning setups; choose the correct orientation for your machine spindle. Use this holder for finishing and semi-finishing passes where predictable chip control and dimensional accuracy are required. Easy Integration and Professional Support for Complex Needs Installation is straightforward when matched with the corresponding DN-- 1506 inserts, and the holder’s ISO code facilitates inventory and setup procedures in professional workshops. If uncertainties remain about fitment or application scenarios, METAV Werkzeuge provides expert consultation to help select the right configuration and achieve optimal machining results. Strongly recommended for demanding turning tasks: select the Turning Holder DDJNL 3232 from Teknik Makina for superior stability and repeatable accuracy — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Specifications Turning Holder Brand / Manufacturer: Teknik Makina SKU: D314TM Compatible Inserts: DN-- 1506 Suitable For Inserts: DN-- 1506 Overall Length: 170 mm Weight: 1.345 kg ISO Designation: DDJNL 3232 Secondary Designation: P15 Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Angle: 93° Cutting Direction: left GTIN: 4061905150746 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is specified for DN-- 1506 indexable inserts; the DDJNL 3232 ISO designation ensures compatibility with standard DN-- 1506 cutting tips. Is the Turning Holder suitable for heavy-duty turning? The Turning Holder DDJNL 3232 features a 32 mm shank width and 32 mm height with a 170 mm overall length, offering enhanced rigidity that is beneficial for demanding external turning operations. Where can I get technical advice for using the Turning Holder by Teknik Makina? For application-specific guidance and recommendations on the Turning Holder by Teknik Makina, METAV Werkzeuge provides expert consultation via info@metav-werkzeuge.com or phone +49 2822 7131930. 170mm Turning Holder DDJNL 3232 for DN-- 1506 Indexable Inserts, 93° Left, 32x32 mm, Teknik Makina
170mm Turning Holder for DNMG 1506, 93° Cutting Angle, Left - Teknik Makina
Turning Holder (Klemmhalter) — PDJNL 3232 for DNMG 1506 Inserts by Teknik Makina The Turning Holder (Klemmhalter) PDJNL 3232 secures DNMG 1506 indexable inserts for precise left-hand turning tasks in professional metalworking environments. Compatible with DNMG 1506 inserts 170 mm Overall Length for extended reach Internal Coolant for improved chip evacuation Robust 32 x 32 mm Shank for stable clamping 93° Cutting Angle for consistent cutting geometry Precision clamping that improves repeatability The PDJNL 3232 Turning Holder delivers secure clamping for DNMG 1506 inserts, minimising insert movement and vibration during cuts. Its clamping concept reduces the risk of insert shift, which directly supports consistent surface finish and longer Insert Life. The controlled 93° Cutting Angle contributes to predictable cutting forces and reliable chip formation, making setups more reproducible across batches. Internal coolant and mechanical stability increase tool life Equipped with Internal Coolant, this clamping tool helps direct coolant to the cutting edge for better lubrication and chip control, reducing thermal load and edge wear. The 32 mm by 32 mm Shank cross-section provides high rigidity, decreasing chatter and enabling higher feeds where the workpiece and machine allow. Together these features support longer service intervals and fewer unplanned tool changes. Versatile length and head geometry for workshop needs With a 170 mm Overall Length and a 40 mm wide cutting head, the holder balances Reach and Stability for common turning operations. The design suits small and medium-sized job shops and CNC turning centres that require dependable Left-Hand turning solutions. The straightforward mounting geometry simplifies integration into existing tool turrets without complex adaptations. Industry-standard designation for easy specification The ISO designation PDJNL 3232 identifies the holder's interface and shank dimensions, simplifying specification and procurement when matching to DNMG 1506 inserts and compatible toolholders. Clear technical specifications and standardised interfaces reduce setup time and help ensure the holder fits into established machining processes without unexpected modifications. Highly recommended for professional turning applications: choose the Teknik Makina Turning Holder for reliable DNMG 1506 performance — for expert advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Specifications Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: P126TM Suitable Inserts: DNMG 1506 ISO Designation: PDJNL 3232 Alternate Designation: P15 Overall Length: 170 mm Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Height: 38 mm Cutting Direction: Left Cutting Angle: 93° With Internal Coolant: Yes Weight: 1.384 kg GTIN: 4061905149801 Availability: In Stock Condition: New Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina? The Teknik Makina Turning Holder (Klemmhalter) is specified for DNMG 1506 indexable inserts; using the correct DNMG 1506 grade ensures proper seating, clamping and optimal cutting performance. Does the holder support coolant-through operation? Yes, the Teknik Makina Turning Holder features Internal Coolant, allowing coolant to reach the cutting edge for improved chip control and reduced thermal stress on the DNMG 1506 inserts. Can this holder be used for left-hand turning only? The PDJNL 3232 design is configured for Left cutting direction; it is intended for left-hand turning operations where the specified geometry and cutting angle deliver stable performance. Who can I contact for technical advice on this Turning Holder? For detailed application support regarding the Teknik Makina Turning Holder, METAV Werkzeuge offers expert consultation — email info@metav-werkzeuge.com or call +49 2822 7131930, and WhatsApp +49 170 2837271. 93° Turning Holder 170mm for DNMG 1506, Left, PDJNL 3232 - Teknik Makina
170mm Turning Holder for KNUX 1604 Indexable Inserts, CKJNR 3232, 93° - Teknik Makina
Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is a robust tool holder designed for right-hand turning with KNUX 1604 indexable inserts, delivering stable clamping and precise cutting in metalworking applications. Turning Holder for KNUX 1604 indexable inserts 170 mm overall length for stable support ISO designation CKJNR 3232 for easy matching Right-hand cutting with 93° cutting angle 40 mm cutter head width for precise seating Built for stable, accurate clamping The Turning Holder from Teknik Makina features a solid construction that provides consistent support during machining. With an overall length of 170 mm and a cutter head width of 40 mm, the tool holder reduces vibration and improves surface finish, so each pass delivers reliable dimensional accuracy. This stability translates directly into fewer reworks and improved component quality for series production. Optimised for KNUX 1604 indexable inserts Designed specifically for KNUX 1604 indexable inserts and bearing the ISO designation CKJNR 3232, this holder ensures correct seating and repeatable positioning of the cutting edge. The clear ISO reference simplifies tool selection and replacement, making setup faster and reducing the risk of incorrect assembly. For users unfamiliar with ISO codes, CKJNR 3232 indicates the holder geometry and clamping style compatible with common turning tool setups. Efficient cutting geometry for right-hand operations The holder’s 93° cutting angle and right-hand cutting orientation support effective chip control and predictable cutting forces. This geometry helps maintain tool life and enables consistent machining of turned parts under varying feed and speed conditions. By combining correct cutting direction with a robust clamping interface, the holder contributes to stable tool performance and enhanced productivity on turning lathes. Who benefits from this tool holder Manufacturers and workshop technicians who work with indexable turning inserts will value the Turning Holder’s compatibility and repeatability. It is suitable for industrial turning applications where setup speed, interchangeability, and process stability matter. If processes require fast changeovers and standardised tooling, this holder integrates well into toolrooms and production lines that prioritise uptime and reproducible results. We recommend Teknik Makina tooling for reliable turning performance — for personalised advice or additional technical data contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: RD013TM For indexable inserts: KNUX 1604 ISO designation: CKJNR 3232 Shank designation: P16 Overall length: 170 mm Width: 32 mm Height: 32 mm Cutter head width: 40 mm Cutting direction: Right Cutting angle: 93° Weight: 1.311 kg GTIN: 4061905052767 Availability: In Stock Condition: New Label: Klemmhalter CKJNR 3232 93° KNUX 1604 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is made for KNUX 1604 indexable inserts; the holder’s geometry and ISO designation CKJNR 3232 ensure proper seating and compatibility with that insert type. Can I use this Turning Holder for left-hand cutting? This specific Turning Holder is configured for right-hand cutting with a 93° cutting angle; for left-hand operations, refer to other Teknik Makina holders designed for that orientation. How does the Turning Holder improve machining stability? By combining a 170 mm overall length with a 40 mm cutter head width and rigid clamping, the Turning Holder reduces vibration and provides repeatable positioning, resulting in improved surface finish and tool life. Who can I contact for technical questions about the Turning Holder? For detailed application support or additional technical data about the Turning Holder from Teknik Makina, METAV Werkzeuge offers expert advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930. 93° Turning Holder CKJNR 3232 for KNUX 1604 Indexable Inserts, 170mm Length - Teknik Makina
170mm Turning Holder for Outside Thread, AL 3232, 16 ER - Teknik Makina
Turning Holder by Teknik Makina — Clamping Holder for 16 ER Inserts The Turning Holder is a robust clamping holder engineered for external threading and secure mounting of 16 ER indexable inserts in turning and threading operations. Turning Holder for 16 ER inserts 170 mm overall length for extended reach 32 mm Width and Height for rigid support ISO AL 3232 designation for straightforward matching Right-hand cutting direction for standard turning tasks Precision and Stability for External Threading The Turning Holder delivers precision through a rigid design that minimizes vibration and runout. Its 170 mm overall length balances reach with stability, while the 32 mm Width and Height of the toolbody provide a solid clamping platform. For workshops focused on repeatable thread quality, the combination of dimensional stability and clear ISO identification reduces setup iterations and scrap rates, enabling more predictable cycle times. Repeatable Performance and Efficient Setup Designed to accept 16 ER indexable inserts (designation P16‑ER16), this clamping holder shortens tool change and adjustment times. The Right-hand cutting direction and a 30 mm Cutting Height ensure compatibility with common right-handed turning programs. Reduced setup complexity results in higher throughput on turning centers and lathes, making the holder a practical choice for production environments where consistency and uptime matter most. Ideal Applications and Who Benefits Metalworking Shops, Maintenance Departments, and Contract Manufacturers benefit from the Turning Holder when tackling external threads or general turning where indexable inserts are preferred. The holder’s ISO AL 3232 identification helps engineers and purchasers quickly verify fitment with existing toolholders and inserts. For users uncertain about fit or application, METAV Werkzeuge offers detailed advice and technical support to ensure the chosen holder meets process requirements. Compatibility Notes and Practical Guidance Understanding the term 16 ER: this refers to the insert pocket and clamping format for ER‑style indexable inserts, simplifying procurement and inventory. The AL 3232 coding denotes the holder geometry for matching with corresponding tool catalogs. When installing, verify insert seating and clamp torque to maintain concentricity; correct mounting preserves insert life and cutting-edge performance, reducing tool-related downtime. We recommend the Teknik Makina Turning Holder for reliable external threading and robust clamping — for tailored advice or technical details please contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271. Technical Data Designation: Turning Holder Brand: Teknik Makina SKU: D262TM Compatible Inserts: 16 ER Alternate Designation: P16- ER16 ISO Designation: AL 3232 Overall Length: 170 mm Width: 32 mm Height: 32 mm Cutting Head Width: 32 mm Cutting Height: 30 mm Cutting Direction: right Weight: 1.436 kg Condition: new Availability: in Stock GTIN: 4061905152542 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina (clamping holder)? The Turning Holder from Teknik Makina is designed for 16 ER indexable inserts, referenced as P16‑ER16, ensuring straightforward compatibility with standard ER‑style insert ranges. Can the Turning Holder by Teknik Makina be used for external threading on production lathes? Yes, the Turning Holder by Teknik Makina (clamping holder) is suitable for external threading and general turning applications on production lathes, offering rigid support and a Right-hand cutting orientation for common programs. How does the ISO AL 3232 designation help when selecting tooling? The ISO AL 3232 code on the Turning Holder by Teknik Makina identifies the holder geometry and mounting style, making it easier to match inserts and adapters and to confirm interchangeability across tooling catalogs. What support does METAV Werkzeuge provide for the Turning Holder by Teknik Makina? METAV Werkzeuge offers expert consultation for the Turning Holder by Teknik Makina, including application advice and technical clarifications — contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D262TM","sku":"D262TM","mpn":"D262TM","gtin13":"4061905152542","name":"170mm Turning Holder for Outside Thread, AL 3232, 16 ER - Teknik Makina","description":"Turning holder for outside thread, AL 3232, accepts 16 ER inserts; 170 mm overall length; 32 mm width and height; 1.436 kg.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/0d/8d/e2/62/62e28d0da9cff922f4706ccb/d261tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/31/7e/de/62/62de7e310aced56449540e8e/d261tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d2/7e/de/62/62de7ed20f56dbb4de4dbf41/d261tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Suitable inserts","value":"16 ER"},{"@type":"PropertyValue","name":"ISO designation","value":"AL 3232"},{"@type":"PropertyValue","name":"Overall length","value":"170 mm"},{"@type":"PropertyValue","name":"Width","value":"32 mm"},{"@type":"PropertyValue","name":"Height","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting height","value":"30 mm"},{"@type":"PropertyValue","name":"Direction of cut","value":"right"},{"@type":"PropertyValue","name":"Weight","value":"1.436 kg"},{"@type":"PropertyValue","name":"Shank","value":"P16- ER16"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"This holder accepts 16 ER inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 170 mm."}},{"@type":"Question","name":"What are the holder dimensions?","acceptedAnswer":{"@type":"Answer","text":"Width and height are 32 mm; cutting head width 32 mm."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation AL 3232."}},{"@type":"Question","name":"What is the cutting direction?","acceptedAnswer":{"@type":"Answer","text":"Cutting direction is right."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Outside Thread Machining"},{"@type":"Thing","name":"Applications: Thread turning and external profiling"}],"mentions":[{"@type":"Thing","name":"16 ER inserts"},{"@type":"Thing","name":"ISO AL 3232"},{"@type":"Thing","name":"Shank P16- ER16"}]}]}
170mm Turning Holder for TN-- 2204 Indexable Inserts, MTENN 3232, 60° - Teknik Makina
Turning Holder (Klemmhalter) from Teknik Makina The Turning Holder (Klemmhalter) is a robust clamping tool designed for turning operations with TN-- 2204 indexable inserts, offering stable engagement and reliable repeatability in workshop environments. Turning Holder MTENN 3232 for TN-- 2204 inserts 170 mm overall length for stable tool engagement 60° cutting angle for predictable cutting geometry 32 x 32 mm shank for rigid clamping fit 16 mm cutting head width for precise insert seating Precision and stability for consistent turning results The Turning Holder delivers high precision through a rigid 32 x 32 mm shank and a carefully defined seating for the insert. This geometry reduces vibration and improves surface finish during turning, which means fewer secondary operations and more parts meeting tolerance on the first pass. The holder’s design supports repeatable positioning of the insert, helping to maintain consistent cutting conditions across batches. Clear compatibility and what the insert designation means This clamping tool is specified for TN-- 2204 indexable inserts and is identified by the MTENN 3232 ISO designation. TN-- 2204 refers to a common insert format with specific edge geometry; using the correct insert ensures optimal chip formation and tool life. For customers less familiar with inserts: indexable inserts are replaceable cutting tips that allow fast tool changes without regrinding, reducing downtime and sharpening process control. Designed for workshop use and professional operators Ideal for machine shops and professional turning applications, this tool holder supports stable machining of shafts and turned components where dimensional accuracy matters. The 170 mm overall length gives a balance between reach and stiffness, and the 60° cutting angle provides predictable engagement for a variety of turning tasks. Operators seeking efficiency and reliable cycle times will find the holder contributes to consistent part quality. Easy handling, assembly and service considerations The holder’s 16 mm cutting head width simplifies insert seating and clamping; fewer adjustments are required when swapping inserts, which speeds up tool changeovers. Regular inspection of the clamping screw and insert seat is advised to maintain the original clamping force and alignment. Teknik Makina’s manufacturing standards ensure dimensional conformity so that replacement inserts and holders align without extensive setup. Choose Teknik Makina’s Turning Holder for dependable clamping and precise turning — for expert advice on application and setup contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D113TM Passende Wendeplatten: TN-- 2204 Gesamtlänge: 170 mm Gewicht: 1.311 kg ISO Bezeichnung: MTENN 3232 Bezeichnung 2: P22 Breite: 32 mm Höhe: 32 mm Schneidkopf Breite: 16 mm Schnittwinkel: 60° GTIN: 4061905151231 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which application suits them best? The Turning Holder (Klemmhalter) from Teknik Makina is designed for TN-- 2204 indexable inserts; these inserts are suitable for general turning of steel and similar materials where reliable edge geometry and quick replacement are required. How does the MTENN 3232 designation affect setup and compatibility? The MTENN 3232 ISO designation identifies the holder dimensions and clamping style; when using the Teknik Makina Turning Holder, select inserts and tool posts compatible with MTENN 3232 standards to ensure correct seating and secure clamping. Is the Turning Holder (Klemmhalter) suitable for high-speed turning operations? Teknik Makina’s Turning Holder is suitable for many turning tasks where stability is required; for very high spindle speeds, consult METAV Werkzeuge to confirm compatibility and recommended cutting parameters for the Turning Holder. Can METAV Werkzeuge assist with choosing the right insert and setup for this clamping tool? Yes, METAV Werkzeuge provides competent advice for the Turning Holder (Klemmhalter) by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. 170mm Turning Holder MTENN 3232 for TN-- 2204 Indexable Inserts, 60° - Teknik Makina
170mm Turning Holder for TN-- 2204 Indexable Inserts, MTJNR 3232, 93° - Teknik Makina
Turning Holder — Teknik Makina Turning Holder for TN-- 2204 Indexable Inserts A robust Turning Holder engineered for right-hand turning with TN-- 2204 indexable inserts, offering stability and precision for metalworking tasks. Compatible with TN-- 2204 indexable inserts 170 mm overall length for extended reach 93° cutting angle for controlled cuts 40 mm cutting head width for secure insert seating 32 x 32 mm shank for rigid clamping Durable construction for consistent machining results The Turning Holder is built to provide long-term stability in demanding shop environments. Its solid design and precision-ground surfaces reduce micro-movements during cutting, which improves surface finish and extends insert life. By choosing a holder with a reliable clamping geometry, operators benefit from fewer vibrations and more predictable tool behaviour, translating directly into reduced rework and higher throughput. Precise compatibility that simplifies tool setup Designed specifically for TN-- 2204 indexable inserts, this holder ensures accurate seating and repeatable positioning of the cutting edge. The 93° cutting angle and right-hand orientation are optimised for common turning tasks, enabling controlled chip formation and predictable cutting forces. For users unfamiliar with ISO designations, this means quicker setup and consistent results without trial-and-error adjustments. Built for professional workshops and CNC turning centers Technicians, contract manufacturers and maintenance shops will appreciate the combination of reach and rigidity provided by this tool holder. With a 170 mm overall length and a compact head profile, the holder fits into tighter setups while maintaining sufficient overhang for external turning operations. The product is particularly suitable where tool stability and repeatable geometry are required for serial production. Key dimensional features that enhance performance Critical dimensions are chosen to balance strength and accessibility: a 32 x 32 mm shank for secure clamping, a 40 mm cutting head width to accommodate the insert seat, and a cutting-edge height of 40 mm for correct tool engagement. These specifications improve cutting stability and make the holder compatible with standard turret and toolpost fixtures, reducing the need for custom adapters and enabling faster tool changes. Choose Teknik Makina's Turning Holder for reliable, precision turning — contact METAV Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D204TM Secondary designation: MTJN for TN-- Indexable Inserts Compatible inserts: TN-- 2204 ISO designation: MTJNR 3232 Secondary code: P22 Overall length: 170 mm Shank width: 32 mm Shank height: 32 mm Cutting head width: 40 mm Cutting edge height: 40 mm Cutting direction: right-hand Cutting angle: 93° Weight: 1.348 kg GTIN: 4061905151132 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is compatible with TN-- 2204 indexable inserts; this compatibility ensures correct seating and repeatable cutting-edge position for consistent machining. Can the Turning Holder be used on CNC lathes and manual tool posts? Yes, the Turning Holder from Teknik Makina is suitable for both CNC turning centers and manual toolposts, provided the clamping fixture accepts a 32 x 32 mm shank and the right-hand orientation matches the operation. What does the 93° cutting angle mean for machining? A 93° cutting angle on the Teknik Makina Turning Holder offers a balanced tool geometry that supports controlled chip flow and reduced cutting forces, helping to achieve stable cuts and improved surface finish. How can I get support or further technical data for the Turning Holder? If you need additional technical details or guidance on the Teknik Makina Turning Holder, METAV Werkzeuge provides expert consultation — email info@metav-werkzeuge.com or phone +49 2822 7131930 for personalised assistance. 170mm Turning Holder MTJNR 3232 for TN-- 2204 Indexable Inserts, 93° - Teknik Makina
170mm Turning Holder for VCMT 1604 Inserts, 93° Left, SVJCL 3232 - Teknik Makina
Turning Holder (Klemmhalter) – SVJCL 3232 for VCMT 1604 by Teknik Makina The Turning Holder is a robust clamp-style toolholder designed for VCMT 1604 indexable inserts and optimized for precise left-hand turning applications. Turning holder for VCMT 1604 inserts ISO designation SVJCL 3232 compatibility 170 mm overall length for stable machining 32 x 32 mm shank for rigid clamping 93° cutting angle for accurate left-hand cuts Precision and stability for demanding turning operations The Turning Holder delivers consistent Precision and Stability in metalcutting tasks by combining a rigid 32 x 32 mm shank with a solid connection to the toolpost. This construction reduces vibration and deflection during cuts, which keeps surface finish quality high and extends Insert life. For workshops that require repeatable results on turned parts, this holder supports controlled chip formation and dependable tool performance. Designed specifically for VCMT 1604 inserts for quick setup Compatibility with VCMT 1604 indexable inserts ensures fast tool changes and predictable cutting behaviour. The holder follows the SVJCL 3232 ISO designation, allowing simple identification and replacement within modular tooling systems. Setup is straightforward: secure the insert, tighten the clamp, and the tool is ready for left-hand turning tasks. This clarity in matching Insert and Holder helps reduce machine downtime and streamlines tool management. Targeted for professional workshops and production environments This toolholder is ideal for machine shops and production lines that perform frequent turning operations and require robust tooling for medium to heavy cuts. The left-hand orientation and 93° cutting geometry are particularly suitable for operations where approach angle and chip flow must be controlled to protect part geometry. For operators seeking tooling that supports throughput without compromising on finish, this holder contributes to operational reliability. Durable construction and low-maintenance operation Manufactured with industrial-grade materials and precise machining, the holder offers long service intervals and straightforward maintenance. The 170 mm overall length and 40 mm cutting head width provide a balanced working envelope that supports both reach and rigidity. Regular inspection of the clamp and fasteners is sufficient to maintain optimal performance, keeping life-cycle costs low while ensuring consistent cutting outcomes. Highly recommended for professionals seeking reliable turning performance: choose the Teknik Makina Turning Holder to secure VCMT 1604 inserts for stable, accurate left-hand turning — for technical advice or compatibility questions contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D393TM GTIN: 4061905052996 Compatible Inserts: VCMT 1604 ISO Designation: SVJCL 3232 Secondary Designation: P16 Overall Length: 170 mm Weight: 1.284 kg Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Height: 50 mm Cutting Direction: left Cutting Angle: 93° Label: Klemmhalter SVJCL 3232 93° VCMT 1604 ECLASS: 21181004 Condition: new Availability: in Stock Manufacturer: Teknik Makina Manufacturer or Manufacturer for English: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person or Responsible Person for English: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed to accept VCMT 1604 indexable inserts, following the SVJCL 3232 ISO designation for straightforward matching and reliable clamping. Can the Teknik Makina Turning Holder be used for heavy cuts? Yes, the Teknik Makina Turning Holder is built for robust performance; its 32 x 32 mm shank and 170 mm overall length provide the rigidity needed for medium to heavy turning operations. Is the SVJCL 3232 holder suitable for left-hand turning only? The SVJCL 3232 configuration of this Turning Holder is intended for left-hand cutting, with a 93° cutting angle optimized for that direction to ensure correct chip flow and tool engagement. Who should I contact if I need more technical details about the Turning Holder? For detailed technical advice regarding the Turning Holder by Teknik Makina, METAV Werkzeuge offers comprehensive support — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 170mm Turning Holder SVJCL 3232 for VCMT 1604 Indexable Inserts, 93° Left, 170 mm Length - Teknik Makina
170mm Turning Holder for VCMT 1604 Inserts, SVJCR 3232, 93° - Teknik Makina
Turning Holder SVJCR 3232 for VCMT 1604 Inserts — Teknik Makina The Turning Holder is a robust turning tool holder designed for VCMT 1604 indexable inserts, providing stable clamping for right-hand turning operations in professional workshops. SVJCR 3232 design for VCMT 1604 inserts 170 mm overall length for stable support 32 mm shank width and height for rigidity 93° cutting angle for precise facing operations Right-hand orientation for standard turning tasks Built for repeatable precision in turning The Turning Holder by Teknik Makina features the SVJCR 3232 ISO designation, engineered to secure VCMT 1604 indexable inserts with consistent clamping force. This results in repeatable tool positioning and reduced setup time, which benefits production environments where identical cuts must be reproduced across multiple workpieces. For operators, that means fewer interruptions and a predictable surface finish on each component. Stable geometry delivers consistent surface quality With a 170 mm overall length and a shank measuring 32 mm in both width and height, the holder offers increased rigidity that minimizes deflection during cutting. The 93° cutting angle supports precise facing and shoulder operations; in practice, a cutting angle describes the orientation between the insert and the workpiece, and a well-chosen angle helps control chip flow and surface integrity. This geometry helps achieve smoother finishes and longer insert life with minimal adjustment. Optimised for common turning applications and users This Turning Holder is tailored to standard right-hand turning tasks and is therefore especially suitable for general machining shops, maintenance departments and contract manufacturers who use VCMT 1604 inserts. The simple compatibility reduces the need for multiple holder types, enabling efficient tool inventories and faster changeovers. Technicians benefit from straightforward fitment and predictable performance in batch and single-part production alike. Clear identification and straightforward compatibility The holder’s secondary designation P16 and the ISO code SVJCR 3232 make selection and ordering transparent when matching tool holders to machine setups. The robust clamping design and a 40 mm cutting-head width ensure that the insert seat supports the insert securely during high-feed operations. For less experienced users: ISO codes like SVJCR indicate shank type, size and insert orientation, which simplifies the process of finding the correct replacement or complementary tool holders. We recommend the Teknik Makina Turning Holder for demanding right-hand turning tasks — for expert guidance and to confirm compatibility with your machining setup contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 Technical specifications and contacts Designation: Turning Holder Brand: Teknik Makina SKU: D249TM Suitable Inserts: VCMT 1604 ISO Designation: SVJCR 3232 Secondary Designation: P16 Overall Length: 170 mm Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Angle: 93° Cutting Direction: Right Weight: 1.284 kg GTIN: 4061905052972 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder compatible with VCMT 1604 inserts from other brands? The Teknik Makina Turning Holder is designed for VCMT 1604 indexable inserts and will accept standard VCMT 1604 geometries; compatibility with other brands depends on identical insert pocket and clamping dimensions, so verify insert seat dimensions before use. What does the ISO code SVJCR 3232 indicate for this Turning Holder by Teknik Makina? The SVJCR 3232 ISO designation of the Teknik Makina Turning Holder specifies the shank type, size and insert orientation; this helps users match the holder to the correct insert and machine setup without guesswork. Can METAV Werkzeuge provide technical advice for the Teknik Makina Turning Holder? Yes, METAV Werkzeuge offers competent consultation for the Teknik Makina Turning Holder — contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support and additional technical data. What cutting direction and typical uses suit the Teknik Makina Turning Holder? The Teknik Makina Turning Holder is configured for right-hand turning and is ideal for facing, shoulder cuts and general external turning tasks where VCMT 1604 inserts are preferred. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D249TM","sku":"D249TM","mpn":"D249TM","gtin13":"4061905052972","name":"170mm Turning Holder SVJCR 3232 93° for VCMT 1604 Inserts - Teknik Makina","description":"Turning holder for VCMT 1604 indexable inserts, 170 mm overall length, SVJCR 3232, 93° cutting angle, right-hand; robust 32×32 mm shank.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/e2/08/35/64/643508e279db570c35c6c770/d239tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cd/7e/de/62/62de7ecd0f56dbb4de4dbf3b/d239tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/29/7e/de/62/62de7e29bd24461b3d5f7a13/d239tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Compatible Inserts","value":"VCMT 1604"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJCR 3232"},{"@type":"PropertyValue","name":"Overall Length","value":"170 mm"},{"@type":"PropertyValue","name":"Shank Width","value":"32 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"40 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"Right"},{"@type":"PropertyValue","name":"Weight","value":"1.284 kg"},{"@type":"PropertyValue","name":"Insert Height","value":"50 mm"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"VCMT 1604 indexable inserts fit this holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 170 mm."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation is SVJCR 3232."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 93°."}},{"@type":"Question","name":"Is the holder right- or left-hand?","acceptedAnswer":{"@type":"Answer","text":"The holder is right-hand."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Allround Turning Applications"},{"@type":"Thing","name":"Indexable Insert Tooling"}],"mentions":[{"@type":"Thing","name":"VCMT 1604 Inserts"},{"@type":"Thing","name":"SVJCR 3232"},{"@type":"Thing","name":"Teknik Makina"}]}]}
170mm Turning Holder for WNMG 0804, 95° PWLN P08, PWLNR 3232 - Teknik Makina
Turning Holder for WNMG 0804 (Klemmhalter) by Teknik Makina The Turning Holder is a robust clamping tool designed for precision turning with WNMG 0804 indexable inserts in right-hand operations. Compatible with WNMG 0804 indexable inserts 95° Cutting Angle for consistent engagement Compact 170 mm overall length for versatile setups Solid 32 x 32 mm shank for stable clamping 40 mm Cutting Head Width for reliable insert seating Precise Stability for Demanding Turning Tasks The Turning Holder from Teknik Makina combines a compact footprint with mechanical rigidity to deliver consistent cutting results. Its 32 x 32 mm shank and solid construction reduce vibration and tool deflection, which improves surface finish and extends Insert lifetime. This stability translates into fewer reworks and predictable cycle times, making the holder an efficient choice for daily workshop use. Optimised Geometry for Reliable Cutting Performance Engineered for right-hand operations, the tool’s 95° cutting angle and 40 mm cutting head width ensure a secure interface with WNMG 0804 inserts, supporting controlled chip flow and repeatable chipbreak. Operators benefit from predictable cutting forces and enhanced tool life, while set-up is simplified by the clearly defined insert seat and clamping arrangement. Designed for Professional Workshops and Production Lines This clamping holder targets machinists and production teams who require dependable tooling for turning applications. The ISO designation PWLNR 3232 indicates a standardised clamping form that integrates seamlessly into existing toolholders and turret systems, minimizing changeover time. For shops seeking reliability and quick insert changes, the holder reduces downtime and supports steady production throughput. Clear Compatibility and Simple Technical Understanding Compatibility with WNMG 0804 indexable inserts is explicit, and the secondary designation P08 helps in cross-referencing tooling lists. The total length of 170 mm provides a balance between reach and stiffness suitable for general turning tasks. For customers unfamiliar with ISO codes: PWLNR describes the holder geometry and clamping direction, while the numeric values denote shank dimensions, ensuring you select the correct holder for your turret or tool post. For precision turning tasks that demand stability and predictable performance, choose the Turning Holder by Teknik Makina — for expert advice and ordering assistance contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com, phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Turning Holder (Bezeichnung: Klemmhalter) Brand: Teknik Makina SKU: P152TM Compatible Inserts: WNMG 0804 ISO Designation: PWLNR 3232 Secondary Designation: P08 Total Length: 170 mm Shank Width: 32 mm Shank Height: 32 mm Cutting Head Width: 40 mm Cutting Direction: right Cutting Angle: 95° Weight: 1.421 kg GTIN: 4061905149917 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and what should I consider? The Turning Holder by Teknik Makina is designed for WNMG 0804 indexable inserts; ensure the insert geometry matches the 95° seat and that the clamping screw aligns with the PWLNR pocket for secure mounting. Is the Turning Holder from Teknik Makina suitable for high-speed production? Yes, the Turning Holder’s rigid 32 x 32 mm shank and stable cutting head make the Teknik Makina holder appropriate for many production environments, offering reduced vibration and consistent tool life when used within recommended cutting parameters. How do I mount an insert into the Teknik Makina Turning Holder safely? Mount the WNMG 0804 insert into the seat, check correct orientation for right-hand cutting, and tighten the clamping screw to the specified torque; the Turning Holder’s clear seating surface aids correct positioning and secure clamping. Can METAV Werkzeuge assist with compatibility and technical questions about the Turning Holder? Absolutely — METAV Werkzeuge provides competent advice for tooling selection and can help verify whether the Turning Holder by Teknik Makina meets your application needs; contact them at info@metav-werkzeuge.com or +49 2822 7131930 for support. 95° Turning Holder PWLNR 3232 for WNMG 0804, 170 mm Length - Teknik Makina
20mm SCLC for CCMT Indexable Turning Holder, internal coolant, left cut, 125mm - Teknik Makina
Turning Holder by Teknik Makina The Turning Holder SCLC for CCMT Indexable Inserts combines robust SCLCL 2020 design with Internal Coolant for precise left‑hand turning tasks in metalworking. SCLCL 2020 style for CCMT 1204 inserts Internal Coolant for improved Chip Evacuation Left-hand Cutting Direction, 95° Cutting Angle 125 mm Overall Length for Deep Turning Torx T15 Screw Interface and U-Plate TA015-1 Precision and Compatibility for Reliable Turning Designed around the SCLCL 2020 footprint, this Turning Holder accepts CCMT 1204 Indexable Inserts and provides a compact, rigid setup for external turning. The combination of a 125 mm Overall Length and a 25 mm Cutting Head Width ensures stable tool overhang while enabling access to confined workpieces. Compatibility with standard U‑Plate TA015-1 and the K12-IC toolholder interface reduces setup complexity and speeds tool changes for production environments. Coolant Integration That Improves Cycle Consistency Internal Coolant is integrated into the tool body to deliver lubrication directly to the cutting edge, reducing thermal stress and promoting more consistent tool life. For users unfamiliar with the term: Internal Coolant means coolant flows through the holder to the Insert rake area, which supports improved Chip Evacuation and can reduce built-up edge formation. This feature is especially beneficial when machining tougher steels or when longer tool life is required. Clear Orientation and Secure Clamping for Safe Operation The holder is engineered for Left-hand Cutting Direction with a 95° Cutting Angle, providing secure chip flow away from the Workpiece during conventional left-hand turning. Clamping uses a Torx interface sized T15 and a retaining screw M4x11, delivering repeatable clamp force for CCMT style plates. The supplied U‑Plate screw interface M6 ensures the Insert seat is firmly supported and aligned for consistent geometry. Who Benefits and Typical Applications Precision shops, maintenance workshops and small-batch production benefit from this compact Turning Holder when performing external turning, facing and profiling on shafts, shoulders and stepped components. The design targets machinists who need an adaptable Insert system: the unit supports common CCMT grades for finishing and semi-finishing operations, while the rigid 20 mm shank dimensions help reduce vibration in medium-duty cuts. Quick Notes on Installation and Maintenance Assembly requires a Torx T15 key for the clamping screw and standard tightening of the U‑Plate with an M6 screw. Regular inspection of the clamping screw torque and coolant passages keeps performance optimal: clear coolant channels prevent blockage and ensure continuous lubrication to the cutting edge. For ease of reference, the holder’s nominal dimensions are a 20 mm shank height and width with a 30 mm Insert Seat Height for compatibility checks. We recommend the Teknik Makina Turning Holder for applications demanding precise left‑hand turning and integrated coolant — for tailored advice or supplementary technical data contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Specifications Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: AP507TM Model Designation ISO: SCLCL 2020 Description English: Turning Holder SCLC for CCMT Indexable Inserts Suitable Inserts: CCMT 1204 Overall Length: 125 mm Overall Height: 20 mm Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 25 mm Insert Seat Height: 30 mm Cutting Direction: Left Cutting Angle: 95° Internal Coolant: Yes Torx Key Size: T15 Clamping Screw: M4x11 U‑Plate: TA015-1 U‑Plate Screw: M6 Tool Holder Interface: K12-IC Weight: 0.38 kg Manufacturer / Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person / Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which sizes are supported? The Teknik Makina Turning Holder is designed to accept CCMT 1204 Indexable Inserts; the seat and clamp geometry follow the SCLCL 2020 specification to ensure secure seating and correct rake orientation. Does the Teknik Makina Turning Holder provide coolant supply and how does it affect machining? Yes, the Turning Holder features Internal Coolant, which directs fluid to the cutting edge to improve lubrication, reduce heat build-up and support more consistent tool life during extended turning operations. Is the holder suitable for left‑hand turning only and what does 95° cutting angle mean? The Teknik Makina Turning Holder is specified for Left-hand Cutting Direction; the 95° Cutting Angle describes the tool’s approach geometry, offering a stable cutting orientation for external profiling and shoulder work. Which screws and keys are needed for mounting the inserts in the Teknik Makina Turning Holder? Mounting uses a Torx T15 interface for the clamping screw (M4x11) and an M6 screw for the U‑Plate TA015-1; using the correct Torx key and torque maintains clamp reliability and repeatability. Who can provide application support and additional technical details for the Turning Holder by Teknik Makina? METAV Werkzeuge offers expert consultation for the Teknik Makina Turning Holder; contact info@metav-werkzeuge.com or phone +49 2822 7131930 for tailored recommendations and supplementary technical data. 125mm SCLC Turning Holder With Internal Coolant, Left Cut, 20mm — Teknik Makina
20mm SDJC for DCMT Indexable Inserts, DCMT 0702 Wendeplatten, Innenkühlung, linksschneidend, 93° SDJCL 2020, K07-IC - Teknik Makina
Die Kombination aus Robuster Klemmung und Innenkühlung sorgt für präzise, dauerhaft stabile Drehbearbeitung; die Kompatibilität mit DCMT 0702‑Wendeplatten macht den Einsatz besonders wirtschaftlich. Bei Bedarf an technischer Klärung oder Lieferbereichen steht Metav Werkzeuge zur Verfügung — prüfen Sie die SDJCL 2020 für zuverlässige linksschneidende Anwendungen. Clamping Holder SDJCL 2020 — SDJC for DCMT Indexable Inserts Clamping Holder SDJCL 2020 designed for reliable left‑hand turning with Internal Cooling and secure insert fixation Solid Clamping for DCMT 0702 Inserts Internal Cooling for continuous machining 25 mm Cutting‑Head Width for sturdy engagement Left‑hand Cutting Direction optimised Includes Torx Schraube M2,5x5,5 for secure fixation Precision Design that Improves Process Reliability Der Holder verbindet eine kompakte Geometrie mit robusten Auflageflächen, sodass die Insert‑Sitzpunkte stabil bleiben und Vibrationen reduziert werden. Durch die definierte Cutting Angle von 93° wird das Schneidverhalten kontrolliert, was zu gleichmässigeren Oberflächen und reduzierten Nachbearbeitungszeiten führt. Vorteile sind geringere Rüstzeiten und konstantere Toleranzen bei Serienfertigung. Internal Cooling for Longer Tool Life and Cooler Cuts Die integrierte Internal Cooling erlaubt zielgerichtete Kühlung direkt an der Schnittzone; das reduziert Thermische Belastungen und verlängert die Standzeit der Schneiden. Besonders bei zähen Materialien führt die Kühlung zu stabiler Spanbildung und mindert die Gefahr von Werkzeugausbrüchen. Die Kombination aus Kühlung und sicherer Clamping‑Lage verbessert die Prozesssicherheit nachhaltig. Compatibility and Practical Handling Der Holder ist speziell auf DCMT 0702‑Wendeplatten ausgelegt und bietet eine einfache, reproduzierbare Montage dank der mitgelieferten Torx Schraube M2,5x5,5 und dem passenden Torx Schlüssel T8. Die Ausrichtung für Left‑Hand Turning und die 25 mm Schneidenkopfbreite erleichtern die Integration in bestehende Aufnahmen wie die Bezeichnung K07‑IC, wodurch Umrüstzeiten minimiert werden. Robust Construction and Application Scope Mit einer Gesamtlänge von 125 mm und einer Gesamthöhe von 20 mm bietet der SDJCL 2020 eine ausgewogene Kombination aus Reichweite und Stabilität. Die 20 mm Aufnahmebreite sorgt für sichere Spannverhältnisse bei Stechoperationen und Plan‑Drehungen; Anwender profitieren von konstanten Schnittbedingungen und vorhersehbaren Ergebnissen auch bei längeren Zerspanzyklen. Strong recommendation: For dependable left‑hand turning with targeted cooling and proven insert compatibility, request the Clamping Holder SDJCL 2020 from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and supply Productfeatures Article number: AP567TM Brand: Teknik Makina Designation: Clamping Holder SDJC for DCMT Indexable Inserts Facts Width: 20 mm Height: 20 mm Cutting‑Head Width: 25 mm Cutting Height: 27 mm Overall Length: 125 mm Overall Height: 20 mm Cutting Angle: 93° Weight: 0.4 kg Cutting Direction: Left Features Internal Cooling: Yes Suitable for Inserts: DCMT 0702 Shank Designation: K07-IC Torx Schraube: M2,5x5,5 Torx Schlüssel: T8 ISO Designation: SDJCL 2020 FAQ How do I know the holder fits my inserts? The Clamping Holder SDJCL 2020 is specified for DCMT 0702 Inserts; Teknik Makina designed the geometry to match the seating and clamping forces required for that plate format, ensuring reliable fixation and repeatable results. Does the holder support coolant-through operation? Yes, the SDJCL 2020 features Internal Cooling that delivers coolant to the Cutting Zone, reducing heat at the Insert and supporting longer tool life during continuous machining. Which screw and key are required for assembly? Assembly uses the supplied Torx Schraube M2,5x5,5 and the corresponding Torx Schlüssel T8 for secure clamping; this combination ensures consistent torque and stable Insert retention for the SDJCL 2020. Is the holder suitable for left‑hand turning only? The Clamping Holder SDJCL 2020 is optimised for Left‑Hand Cutting Direction; its geometry and Cut Angle are set to deliver the best performance in left‑hand turning applications. What shank or bar is compatible with this holder? The product references shank designation K07‑IC, which simplifies integration into compatible toolholding systems and reduces the need for custom adaptors when retrofitting the SDJCL 2020. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Turning Holder for Outside Thread, Right, 125mm, AL 2020 - Teknik Makina
Turning Holder for Outside Thread by Teknik Makina The Turning Holder is a compact tool holder designed for precise external threading on lathes, compatible with standard indexable inserts and engineered for stable, repeatable clamping. Turning Holder Klemmhalter for Outside Thread Compatible with 22 ER indexable inserts Clamping block designation AL 2020 Cutting direction: Right-hand operation Compact dimensions: 20 x 20 mm shank Built for precise external threading and repeatable clamping The Turning Holder delivers precision where it matters: a robust clamping concept minimizes tool movement and vibration, improving Thread Quality and surface finish. Designed for use with 22 ER indexable inserts, the holder ensures consistent engagement of the cutting edge during external threading operations. This reliability reduces scrap and rework, making the tool suitable for small-batch production and workshop applications where reproducibility is required. Compact geometry that fits tight tool posts and tool magazines With a shank cross-section of 20 x 20 mm and an overall length of 125 mm, the holder was developed for constrained setups and quick tool changes. The ISO designation AL 2020 indicates standardized compatibility with many turret and tool post systems, enabling straightforward integration into existing setups. The compact footprint supports flexible machine layouts without sacrificing clamping force, so operators benefit from space savings and stable machining. Simple fastening and clear technical basics for confident use Installation and maintenance are straightforward: the cutting head secures with a Torx screw M4x11, providing a defined clamping torque for safe operation. The tool is configured for right-hand cutting direction and a cutting height of 30 mm, parameters that facilitate correct setup and predictable chip flow. For users unfamiliar with insert terminology: “ER” refers to the family of collet-style insert holders; using 22 ER inserts means easy replacement and a wide selection of geometries for different threads and materials. Strongly recommend the Teknik Makina Turning Holder for reliable external threading — for detailed setup advice or if you are unsure whether this tool meets your requirements, contact METAV Werkzeuge for expert support at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp: +49 170 2837271) Bezeichnung: Turning Holder (Klemmhalter) for Outside Thread Marke: Teknik Makina SKU: D265TM Eclass: 21181004 For Indexable Inserts: 22 ER Clamping Block (ISO): AL 2020 Holder Bar Designation: K22-ER22 Shank Width (mm): 20 Shank Height (mm): 20 Cutting Head Width (mm): 20 Overall Length (mm): 125 Cutting Height (mm): 30 Cutting Direction: Right Torx Screw: M4x11 Weight (kg): 0.46 Product Type: VARIANT Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is compatible with 22 ER indexable inserts; this means you can select appropriate insert grades and geometries for threading and turning tasks while keeping replacement straightforward. Can I use this Turning Holder in a standard 20 x 20 mm tool post? Yes, the Turning Holder is designed with a 20 x 20 mm shank and ISO designation AL 2020, making it suitable for most standard 20 x 20 mm tool posts and turrets used in workshop and light production environments. Is the Turning Holder suitable for left-hand operations? The Turning Holder supplied by Teknik Makina is specified for right-hand cutting direction; for left-hand operations, please consult METAV Werkzeuge to identify an appropriate alternative or confirm machine compatibility. Who can I contact for technical advice about the Turning Holder? For application support or further technical details about the Turning Holder by Teknik Makina, METAV Werkzeuge provides competent advice — reach out via info@metav-werkzeuge.com, call +49 2822 7131930, or WhatsApp +49 170 2837271. 125mm Turning Holder for Outside Thread, Right, 20mm, AL 2020 - Teknik Makina
22 IR Turning Holder for Outside Thread, 150mm Length, Left Cut - Teknik Makina
Turning Holder — Clamping Holder for Outside Thread The Turning Holder is a precise clamping tool designed for outside threading with 22 IR indexable inserts, offering stable performance for left-hand turning operations. Suitable for 22 IR indexable inserts 150 mm overall length for deep reach 25 mm cutting head width for high stability Left-hand cutting direction for specialized turning ISO AL 2525 designation for standardized mounting Reliable clamping for consistent thread quality A secure clamping system is essential when producing external threads; the Turning Holder grips 22 IR inserts firmly to reduce vibration and ensure repeatable results. With a 25 mm cutting head width and 150 mm overall length, the tool body provides the stiffness required for clean thread profiles while maintaining access to deeper workpieces. This stability translates into fewer reworks and improved surface finish on turned parts. Optimised for outside threading and left-hand operations Designed specifically for outside thread turning, the holder supports left-hand cutting direction to match machine setups and thread specifications. Operators benefit from predictable chip flow and controlled cutting forces when the holder is paired with the correct insert geometry. The focused design reduces deflection during cut engagement, making it suitable for workshop environments where precision and process reliability matter. Compatibility explained for safe selection and setup The holder accepts 22 IR type indexable inserts — a common format in threading applications; this means users can source inserts from multiple suppliers while keeping a consistent clamping interface. The ISO designation AL 2525 indicates standardised shank geometry and mounting references, simplifying machine setup and tool replacement. For newcomers: “22 IR” denotes the insert size and seat form, ensuring the correct insert seat is chosen for secure fixation and optimal cutting performance. Practical fit for production and maintenance workflows With a robust construction and clear dimensional data, the Turning Holder integrates into existing tooling setups with minimal adjustments. The combination of 25 mm width, 25 mm height and a 30 mm blade height dimension contributes to operational stability and predictable tool life when used within recommended parameters. For support in choosing inserts or adapting the holder to special applications, METAV Werkzeuge provides technical advice and hands-on assistance to optimise cutting strategies. Opt for the proven stability of the Teknik Makina Turning Holder for accurate outside threading — for personalised advice and technical support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Technical specifications for planning and procurement Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D266-1TM For indexable inserts: 22 IR Compatible inserts: 22 IR Overall length: 150 mm Weight: 0.748 kg ISO designation: AL 2525 Secondary designation: M22- IR22 Width: 25 mm Height: 25 mm Cutting head width: 25 mm Cutting height: 30 mm Cutting direction: left GTIN: 4061905152580 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and how do I choose them? The Turning Holder by Teknik Makina accepts 22 IR indexable inserts; choose inserts with the matching seat form and geometry for outside threading to ensure secure clamping and correct chip formation. METAV Werkzeuge can advise on insert grades and geometries for different materials. Is the Turning Holder suitable for deep thread turning in a production environment? Yes, the Turning Holder (Klemmhalter) with its 150 mm overall length and 25 mm head width is designed to provide the reach and stiffness required for deeper external threading tasks in workshops and small production runs. How do I mount the Teknik Makina Turning Holder and what does AL 2525 mean? Mount the Turning Holder according to your tool post specification; the AL 2525 ISO designation refers to standardised shank dimensions and mounting references, which simplifies installation and interchangeability. If in doubt, METAV Werkzeuge offers setup support. Can METAV Werkzeuge help if I need a specific insert recommendation for the Turning Holder? Absolutely — METAV Werkzeuge provides competent, detailed consultation for tooling choices and process parameters for the Turning Holder by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored assistance. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D266-1TM","sku":"D266-1TM","mpn":"D266-1TM","gtin13":"4061905152580","name":"Turning Holder for Outside Thread, 150 mm, Left Cut - Teknik Makina","description":"Turning holder for 22 IR indexable inserts; 150 mm overall length, left cutting direction, ISO AL 2525, 25×25 mm head.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/36/95/1d/64/641d9536eb4c191311cc55fd/d268tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/31/7e/de/62/62de7e31bd24461b3d5f7a18/d268tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d2/7e/de/62/62de7ed2bd24461b3d5f7a5b/d268tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Insert Size","value":"22 IR"},{"@type":"PropertyValue","name":"Overall Length","value":"150 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"Left"},{"@type":"PropertyValue","name":"ISO Designation","value":"AL 2525"},{"@type":"PropertyValue","name":"Shank Width","value":"25 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"25 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.748 kg"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What insert size does the holder accept?","acceptedAnswer":{"@type":"Answer","text":"Accepts 22 IR indexable inserts."}},{"@type":"Question","name":"What is the overall length of the holder?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 150 mm."}},{"@type":"Question","name":"Which cutting direction is this holder designed for?","acceptedAnswer":{"@type":"Answer","text":"Designed for left cutting (left cut)."}},{"@type":"Question","name":"What is the ISO designation of the holder?","acceptedAnswer":{"@type":"Answer","text":"ISO designation AL 2525."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank width and height are 25 mm each."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-for-outside-thread-150mm-left-cut-tekni k-makina","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Thread Turning Applications"},{"@type":"Thing","name":"Indexable Insert Tooling"}],"mentions":[{"@type":"Thing","name":"22 IR Inserts"},{"@type":"Thing","name":"ISO AL 2525"},{"@type":"Thing","name":"Left Cutting Direction"}]}]}
250mm DCLN Turning Holder for CN-- 1906 Indexable Inserts, 95° left - Teknik Makina
Turning Holder from Teknik Makina The Turning Holder is a clamping tool for lathe operations, designed to secure CN-- 1906 indexable inserts and enable precise, left-hand turning in compact setups. DCLNL 4040 ISO designation for solid clamping Compatible with CN-- 1906 indexable inserts 250 mm overall length for extended reach 40 mm profile width and height for rigidity 95° cutting angle for stable left-hand cuts Engineered for reliable clamping and precise results The Turning Holder delivers stable clamping that reduces vibration and improves surface finish during turning operations. Thanks to the DCLNL 4040 interface, the tool maintains consistent insert positioning, which directly translates into repeatable machining accuracy and longer tool life. This results in fewer reworks and a more predictable process for production environments. Compatibility that expands tooling options Designed specifically for CN-- 1906 indexable inserts, this holder offers immediate compatibility with a wide range of carbide grades and geometries. Using CN-- 1906 inserts allows operators to select coatings and chipbreakers tailored to material and cutting conditions, simplifying tool selection while increasing application flexibility. The clear match between holder and insert supports quick setup changes on the lathe. Compact 40 mm profile for rigid setups in tight spaces With a 40 mm width and 40 mm height, the holder provides a compact yet rigid footprint that suits modern turret and tool post arrangements. The 250 mm overall length gives extra reach without excessive overhang, helping to maintain stiffness in constrained workspaces. This geometry supports controlled cutting forces and contributes to consistent dimensional accuracy on turned parts. Left-hand cutting with a 95° approach for robust operation Configured for left-hand cutting and featuring a 95° approach angle, the tool is optimised for applications that demand strong radial support and controlled chip flow. The angle helps direct cutting forces into the workpiece and tool body, which improves stability during interrupted cuts and when machining heavier sections. This design choice enhances operator confidence in demanding turning tasks. We recommend the Teknik Makina Turning Holder for workshops that require a sturdy, insert-compatible clamping solution — for personalised advice or technical clarification contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Bezeichnung: Turning Holder Marke / Manufacturer: Teknik Makina SKU: D307-2TM For Indexable Inserts: CN-- 1906 Compatible Inserts: CN-- 1906 Overall Length: 250 mm Weight: 3.195 kg ISO Designation: DCLNL 4040 Secondary Designation: S19 Width: 40 mm Height: 40 mm Cutting Head Width: 40 mm Cutting Direction: left Cutting Angle: 95° Eclass: 21181004 GTIN: 4061905151484 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder by Teknik Makina compatible with CN-- 1906 inserts? Yes, the Turning Holder from Teknik Makina is specifically designed for CN-- 1906 indexable inserts, ensuring correct fit and reliable insert clamping for standard machining applications. What is the overall length and how does that affect use of the Turning Holder? The Teknik Makina Turning Holder has an overall length of 250 mm, which offers extended reach while maintaining rigidity to support stable turning and reduced vibration in typical lathe setups. Can this holder be used for right-hand cutting applications? The Turning Holder by Teknik Makina is configured for left-hand cutting with a 95° approach angle; it is therefore intended for operations that require left-hand tool orientation. Who can I contact for technical advice about the Turning Holder? For technical guidance on the Turning Holder, METAV Werkzeuge provides comprehensive support — reach out via eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 (WhatsApp +49 170 2837271). 250mm DCLN Turning Holder for CN-- 1906 Indexable Inserts, 95° Left - Teknik Makina
250mm DSSNR 4040 Turning Holder for SNMG 2508, 45° - Teknik Makina
Turning Holder for SNMG 2508 Indexable Inserts by Teknik Makina The Turning Holder is a robust clamping tool designed for turning operations with SNMG 2508 indexable inserts, providing stable support for medium-duty lathe work. Clamping Holder DSSNR 4040 for SNMG 2508 250 mm Overall Length for stable machining 45° Cutting Angle for versatile turning Right-hand Cutting Direction for standard operations 50 mm Shank Width for secure mounting Precise Compatibility that Reduces Setup Time and Waste The Turning Holder is engineered for straightforward integration with SNMG 2508 indexable inserts and carries the DSSNR 4040 ISO designation, so insert fitment and orientation are predictable. With a 45° cutting angle the toolholder supports common turning profiles while minimising rework, and the right-hand configuration simplifies fixture planning in conventional lathes. This predictability reduces setup time and material waste, delivering consistent cycle times for production batches. Robust Design for Vibration Damping and Dimensional Stability A solid construction with an overall length of 250 mm and a shank width of 50 mm gives the holder mechanical stiffness where it matters most. The 40 mm height and 40 mm Cutting Head Width provide a stable contact area that lowers vibration and improves Surface Finish on the workpiece. The compact but rigid geometry helps maintain tool life of the insert and reduces the likelihood of chatter during heavier cuts, which benefits repeatable accuracy across long runs. Practical Use Cases and Who Benefits Most This clamping tool is aimed at workshops and job shops performing turning operations on steel and cast components that require reliable indexable-insert performance. The combination of standard ISO indexing and robust shank dimensions makes the holder suitable for batch production, finishing passes and general-purpose turning where tool change reliability and repeatable set-up are priorities. Operators looking for a dependable, easy-to-clamp solution will appreciate the holder's predictable behaviour under load. Proven Manufacture and Support for Industrial Use Manufactured by Teknik Makina, the holder reflects attention to machining tolerances and repeatability. Technical compatibility is documented and spare parts are straightforward to source thanks to the standardized interface. If there is any uncertainty whether this holder fulfils specific machining conditions or if supplementary technical data is required, METAV Werkzeuge offers expert consultation and application advice to ensure the right tool choice for your process. You can reach METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271. Strong recommendation: Choose Teknik Makina’s Turning Holder for reliable, consistent turning results and contact METAV Werkzeuge for tailored technical support and ordering assistance — email info@metav-werkzeuge.com or call +49 2822 7131930 Designation: Turning Holder Brand / Manufacturer: Teknik Makina SKU: D208TM Compatible Indexable Inserts: SNMG 2508 ISO Designation: DSSNR 4040 Secondary Designation: S25 Overall Length: 250 mm Shank Width: 50 mm Height: 40 mm Cutting Head Width: 40 mm Cutting Angle: 45° Cutting Direction: Right Weight: 3.012 kg GTIN: 4061905052774 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is specifically compatible with SNMG 2508 indexable inserts and uses the DSSNR 4040 interface to ensure correct seating and orientation. Is the Teknik Makina Turning Holder suitable for heavy cuts? The Teknik Makina Turning Holder, with its 250 mm length and 50 mm shank width, offers increased stiffness that helps resist deflection during heavier cuts, making it suitable for many medium-duty turning tasks. How do I get technical support or ordering help for the Turning Holder by Teknik Makina? For application advice or additional technical specifications on the Turning Holder by Teknik Makina, contact METAV Werkzeuge via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or WhatsApp at +49 170 2837271. Can the Teknik Makina Turning Holder be used in automated production cells? Yes, the Turning Holder from Teknik Makina features standard ISO interfacing and robust dimensions that make it compatible with automated loading systems and repeatable setup procedures in production cells. 250mm DSSNR 4040 Turning Holder for SNMG 2508, 45° - Teknik Makina
250mm DSSNR For SNMG 1906, 45°, DSSNR 4040 - Teknik Makina
Turning Holder DSSNR 4040 by Teknik Makina — Turning Holder for SNMG 1906 Indexable Inserts The Turning Holder DSSNR 4040 is a right-hand turning holder engineered for SNMG 1906 indexable inserts, offering stable support and precise external turning on lathes. DSSNR 4040 for SNMG 1906 inserts 250 mm overall length for improved stability Right-hand orientation with 45° cutting angle 50 mm width and 40 mm height for high rigidity Secure clamping for repeatable machining results Built for Stable, Repeatable Turning With an overall length of 250 mm and a robust profile, this tool delivers consistent support for external turning. The DIN-style DSSNR 4040 geometry minimises deflection and vibration, which translates into improved surface finish and dimensional accuracy. For shops that demand repeatability, the design reduces setup variance and helps maintain tight tolerances across batch production. Compatibility That Ensures Predictable Performance Designed specifically for SNMG 1906 indexable inserts, the holder’s 45° cutting angle and right-hand orientation provide predictable chip flow and reliable cutting engagement. This compatibility simplifies tool selection and setup, so operators experience fewer interruptions for insert changes and can rely on consistent machining behaviour for a wide range of turning tasks. Robust Clamping for Longer Tool Life The ISO designation DSSNR 4040 defines a secure clamping interface that keeps the insert firmly seated during heavy cuts. The combination of a 50 mm width and 40 mm height increases rigidity at the cutting zone, reducing micro-movements that accelerate insert wear. As a result, shops can expect improved insert life and fewer rework cycles while maintaining machining stability. Made for Professional Turning Applications Engineered by Teknik Makina, this turning holder addresses the demands of professional workshops and production environments that prioritise precision and uptime. The product’s straightforward compatibility and solid construction make it well suited for turning operations where consistent quality and efficient workflows are essential. For demanding turning applications, opt for Teknik Makina’s high-precision Turning Holder DSSNR 4040 — contact METAV Werkzeuge for expert consultation and order support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D207TM For indexable inserts: SNMG 1906 ISO designation: DSSNR 4040 Bezeichnung 2: S19 Overall length: 250 mm Width: 50 mm Height: 40 mm Cutting head width: 40 mm Cutting height: 46 mm Cutting direction: right Cutting angle: 45° Weight: 3.123 kg Condition: new Availability: in Stock GTIN: 4061905052750 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder DSSNR 4040 by Teknik Makina? The Teknik Makina Turning Holder DSSNR 4040 is designed for SNMG 1906 indexable inserts; using the specified insert type ensures correct seating, chip control and the intended cutting geometry. Is the Teknik Makina Turning Holder DSSNR 4040 suitable for heavy-duty turning? The Teknik Makina Turning Holder DSSNR 4040, with its rigid 50 mm by 40 mm profile and secure clamping, is intended for demanding turning tasks where stability and repeatable performance are required. How does the 45° cutting angle affect machining with the Turning Holder DSSNR 4040? The 45° cutting angle on the Teknik Makina Turning Holder DSSNR 4040 promotes smoother engagement and predictable chip formation, which helps achieve better surface finish and reduces cutting forces for many external turning operations. Where can I get technical support or ordering help for the Turning Holder DSSNR 4040? For expert advice on the Teknik Makina Turning Holder DSSNR 4040 or assistance with compatibility and ordering, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp support is available at +49 170 2837271. 250mm DSSNR Turning Holder for SNMG 1906, 45° - Teknik Makina
45° SNMG 1204 Clamp Holder PSSN for SNMG Indexable Inserts, 100 mm - Teknik Makina
Clamp Holder (Turning Holder) for SNMG 1204 by Teknik Makina The Clamp Holder (Turning Holder) is a robust toolholder with a 45° Cutting Angle designed for precision turning with SNMG 1204 indexable inserts. Precise 45° cutting geometry for fine surface finishes Secure plate clamping for vibration reduction Quick insert change for shorter setup times Compatible with SNMG 1204 indexable inserts Compact 100 mm Length for versatile machining Precision and Stability that Improves Surface Quality Engineered for accuracy, this holder delivers a Precise Fit for SNMG 1204 inserts so that Plates remain securely seated during machining. The 45° Cutting Angle supports improved Surface Quality and reduces chatter, which results in more consistent part tolerances. Users benefit from lower scrap rates and less rework when machining Steel and Cast Materials. The robust construction also contributes to reliable repeatability in serial production. Faster Tool Changes to Reduce Setup Time Fast changeover is a clear advantage: the Clamping Mechanism allows for effortless insert replacement, minimising Downtime and increasing Machine Uptime. A straightforward screw design enables quick removal and reinstallation of inserts, which lowers Rüstzeiten and improves Process Efficiency. Shops with mixed production runs will experience tangible throughput gains even when switching between part variants. Built for Compatibility and Clear Dimensions Designed to meet common tooling standards, this holder fits SNMG 1204 indexable inserts and carries the ISO designation PSSNR 1616. Key Dimensions include a Total Length of 100 mm, Width 16 mm, Height 16 mm and a Cutting Head Width of 20 mm, providing a compact footprint without sacrificing rigidity. Clear dimensional data simplifies Fixture Planning and ensures the holder integrates smoothly with existing Tooling Systems. Suited for Professional Workshops and Diverse Applications Ideal for professional turning operations, the holder is aimed at Machinists and Toolroom Professionals who require durable, reproducible results. Its compatibility with standard SNMG inserts makes it appropriate for a wide range of Turning, Facing and Light Boring tasks. The tool is configured for Right-hand Cutting Direction and is particularly useful in setups where quick insert swaps and stable clamping directly impact productivity. Secure consistent, high-precision turning with Teknik Makina’s Clamp Holder — for expert advice and ordering assistance contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Bezeichnung: Clamp Holder (Klemmhalter) Brand: Teknik Makina SKU: P170TM For Indexable Inserts: SNMG 1204 Compatible Inserts: SNMG 1204 Total Length: 100 mm Weight: 0.218 kg ISO Designation: PSSNR 1616 Secondary Designation: H12 Width: 16 mm Height: 16 mm Cutting Head Width: 20 mm Cutting Angle: 45° Cutting Direction: Right GTIN: 4061905052477 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Clamp Holder suitable for SNMG 1204 inserts and what makes it compatible? The Clamp Holder by Teknik Makina is specifically designed for SNMG 1204 indexable inserts; its ISO designation PSSNR 1616 and the Precise Fit ensure correct seating and stable clamping for reliable machining performance. How does the Clamp Holder speed up tool changes in a production environment? The Clamp Holder from Teknik Makina features an accessible clamping screw and straightforward insert mounting, which allow quick insert replacement and reduce setup time in daily workshop operations. Which materials can I machine effectively with this Turning Holder from Teknik Makina? The Turning Holder (Clamp Holder) by Teknik Makina is suitable for a wide range of materials, including common Steels and Cast Materials, where the 45° Cutting Angle and solid clamping contribute to improved surface finish and tool life. Where can I get additional technical support or ordering help for the Clamp Holder? For detailed technical data or to confirm suitability of the Clamp Holder by Teknik Makina for your application, METAV Werkzeuge provides expert consultation — email info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#P170TM","sku":"P170TM","mpn":"P170TM","gtin13":"4061905052477","name":"Clamp Holder PSSNR 1616 45° SNMG 1204","description":"Clamp holder PSSN for SNMG indexable inserts, 45° cutting angle, 100 mm overall length; robust design for secure insert seating and quick exchange.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/06/8d/e2/62/62e28d06a9cff922f4706cc8/p170tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png"],"additionalProperty":[{"@type":"PropertyValue","name":"For inserts","value":"SNMG 1204"},{"@type":"PropertyValue","name":"Cutting angle","value":"45°"},{"@type":"PropertyValue","name":"Overall length","value":"100 mm"},{"@type":"PropertyValue","name":"ISO designation","value":"PSSNR 1616"},{"@type":"PropertyValue","name":"Width","value":"16 mm"},{"@type":"PropertyValue","name":"Height","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"20 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.218 kg"},{"@type":"PropertyValue","name":"Direction","value":"right"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this clamp holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for SNMG 1204 indexable inserts."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The clamp holder features a 45° cutting angle for precise surface machining."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 100 mm."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation PSSNR 1616."}},{"@type":"Question","name":"What materials or benefits does it offer?","acceptedAnswer":{"@type":"Answer","text":"Robust construction ensures secure insert seating, easy screw removal and quick exchange to reduce setup times."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/clamp-holder-pssn-snmg-1204-p170tm","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Clamp Holder PSSN for SNMG Indexable Inserts"},{"@type":"Thing","name":"Allround Turning Applications"},{"@type":"Thing","name":"Reduced Setup Time and Robust Insert Seating"}],"mentions":[{"@type":"Thing","name":"SNMG 1204 Inserts"},{"@type":"Thing","name":"PSSNR 1616 ISO Designation"},{"@type":"Thing","name":"Teknik Makina Manufacturer"}]}]}
50° CN-- 1204 Turning Holder DCMNN 2020, 125mm, 20mm Wide - Teknik Makina
Turning Holder DCMNN for CN-- 1204 Indexable Inserts by Teknik Makina The Turning Holder is a clamp-style tool for CN-- 1204 indexable inserts, engineered for precise turning operations with a 50° cutting angle and 125 mm overall length. Fits CN-- 1204 indexable inserts 50° Cutting Angle for fine surface quality ISO DCMNN 2020 profile for reliable positioning 125 mm Overall Length for standard tool setups Precision and Stability for Accurate Turning Engineered for demanding metalworking tasks, the Turning Holder secures CN-- 1204 inserts with repeatable accuracy to reduce setup variation. The 50° cutting angle supports consistent chip formation and improved surface finish, while the clamping geometry minimises micro‑movement during cuts. This precision leads to fewer rework cycles and steadier part tolerances, making high‑volume or batch machining more reliable and predictable. Fast Tool Changes to Boost Workshop Efficiency The clamp design allows straightforward screw removal and rapid insert replacement, cutting down non‑productive time during tool changes. With the ISO designation DCMNN 2020, alignment is intuitive and replacement inserts seat consistently, which shortens retooling intervals and supports lean production workflows. Fewer interruptions mean higher machine uptime and a smoother production rhythm for operators and supervisors alike. Suitable Applications and Who Benefits Most Ideal for professional workshops, job shops and production lines, this holder is designed for machinists who need dependable, repeatable performance when turning a variety of materials. The compatibility with CN-- 1204 indexable inserts makes it versatile for finishing and semi‑finishing operations. Maintenance staff and process engineers will appreciate the reduced vibration and stable cutting conditions, which support predictable tool life and part quality. Robust Dimensions and Practical Compatibility With a 125 mm overall length, 20 mm width and 20 mm height, the holder fits common turret and toolpost setups and integrates into standard turning configurations. The 10 mm cutting head width and 35 mm cutting height provide a balanced footprint for many turning tasks. These dimensions combine to offer a tool that is both compact and rigid, improving edge life of inserts and delivering consistent machining results. For precision turning, choose the Teknik Makina Turning Holder — for expert technical advice and order support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: D214-1TM For Indexable Inserts: CN-- 1204 ISO designation: DCMNN 2020 Total Length: 125 mm Width: 20 mm Height: 20 mm Cutting Head Width: 10 mm Cutting Height: 35 mm Cutting Angle: 50° Weight: 0.445 kg GTIN: 4061905151491 Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and how are they secured? The Turning Holder by Teknik Makina is designed for CN-- 1204 indexable inserts; inserts are clamped securely by the holder’s fast‑access screw system to ensure correct seating and repeatable positioning during machining. Can the DCMNN 2020 Turning Holder be used in automated turret systems? Yes, the DCMNN 2020 Turning Holder from Teknik Makina is compatible with standard turret and toolpost configurations thanks to its 125 mm overall length and standardised ISO profile, making it suitable for automated systems. How does the 50° cutting angle benefit my turning operations with this Klemmhalter? The 50° cutting angle of the Teknik Makina Klemmhalter promotes stable chip control and superior surface finish, which helps reduce rework and supports consistent dimensional accuracy in finishing passes. Who should contact METAV Werkzeuge for help choosing the right Turning Holder? If uncertain whether the Turning Holder by Teknik Makina meets your requirements, contact METAV Werkzeuge for expert advice—especially recommended for complex setups or high‑precision production environments. Their team provides competent consultation and support. 50° CN-- 1204 Turning Holder DCMNN 2020, 125 mm, 20 mm Wide - Teknik Makina
60° TN-- 1604 Clamp Holder MTENN 2020, 125mm, 20mm width - Teknik Makina
Introducing the Clamp Holder (Klemmhalter) — Turning Holder by Teknik Makina The Clamp Holder is a 60° turning holder designed for TN-- 1604 and TN-- 2204 indexable inserts, ideal for quick insert changes and precise surface finishing in workshop and production environments. Clamp holder MTENN 2020 for TN-- 1604 inserts 60° cutting angle for precise surface finishes Compatible with TN-- 2204 indexable inserts 125 mm overall length for stable tool setup Fast insert change reduces setup time Precise 60° geometry for consistent surface quality Engineered with a fixed 60° cutting angle, this holder delivers repeatable results on turned surfaces. The geometry supports precision finishing and reduces the need for downstream rework, because a consistent cutting angle improves surface quality and dimensional accuracy. For users who require uniform results across multiple workpieces, the geometry contributes directly to lower scrap rates and improved process control. Fast, user-friendly insert changes to maximise uptime Designed for rapid clamping and straightforward screw access, the holder enables quick replacement of indexable inserts so that machining cycles resume with minimal interruption. A quick change workflow means shorter setup times and higher machine availability. This benefit is particularly relevant for production shops that cycle different parts frequently and need to minimise non-cutting time. Robust design for stability and vibration reduction Made to secure ISO inserts reliably, the clamp concept improves stability at the tool tip, which helps to reduce vibrations and extend insert life. The precise seating and screw accessibility ensure the insert is held firmly during heavy cuts, supporting consistent tool life and lower tooling costs through selective insert replacement rather than full-tool replacement. Who benefits: workshops, job shops and production lines This holder is aimed at professional users who work with indexable inserts and value operational efficiency: from small workshops to larger production lines. Its compatibility with common ISO inserts makes it versatile across materials and turning applications, while the reduced setup effort and improved repeatability address both skilled machinists and operators seeking dependable tooling. We recommend the Teknik Makina Clamp Holder for professionals who prioritise fast tool changes and reproducible 60° turning results — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Designation: Klemmhalter Brand: Teknik Makina SKU: D108TM For indexable inserts: TN-- 1604 Compatible indexable inserts: TN-- 1604, TN-- 2204 Overall length: 125 mm Weight: 0.408 kg ISO designation: MTENN 2020 Secondary designation: K16 Width: 20 mm Height: 20 mm Cutting head width: 10 mm Cutting height: 35 mm Cutting angle: 60° GTIN: 4061905151200 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What indexable inserts fit the Clamp Holder from Teknik Makina? The Clamp Holder by Teknik Makina is compatible with ISO indexable inserts TN-- 1604 and TN-- 2204, allowing flexible use across common turning applications. How does the 60° cutting angle benefit machining with this Clamp Holder? A 60° cutting angle on the Teknik Makina Clamp Holder provides consistent contact geometry for improved surface finish and repeatable dimensional accuracy, which reduces secondary operations. Is the Clamp Holder suitable for high-volume production? Yes, the Teknik Makina Clamp Holder is designed for robust clamping and quick insert changes, making it well suited for production environments that need reduced setup times and high machine uptime. Where can I get further technical support for the Clamp Holder from Teknik Makina? If you need more detailed specifications or application advice for the Teknik Makina Clamp Holder, METAV Werkzeuge offers expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D108TM","sku":"D108TM","mpn":"D108TM","gtin13":"4061905151200","name":"Clamp Holder MTENN 2020 60° TN-- 1604","description":"Clamp holder MTENN for TN-- 1604 indexable inserts, 125 mm overall length, 20 mm width, 60° cutting angle; robust Teknik Makina turning holder for reliable tool clamping.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/01/8d/e2/62/62e28d014355de0a51335f4f/d108tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3b/7e/de/62/62de7e3b148ec6b71020ff7f/d108tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d9/7e/de/62/62de7ed933927e49dbf32780/d108tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"TN-- 1604, TN-- 2204"},{"@type":"PropertyValue","name":"ISO Designation","value":"MTENN 2020"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"60°"},{"@type":"PropertyValue","name":"Weight","value":"0.408 kg"},{"@type":"PropertyValue","name":"Shank Designation","value":"K16"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this clamp holder?","acceptedAnswer":{"@type":"Answer","text":"Fits TN-- 1604 and TN-- 2204 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 60° for precise surface finishes."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation MTENN 2020."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/d108tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Allround Clamping for Indexable Inserts"},{"@type":"Thing","name":"Teknik Makina Tooling"}],"mentions":[{"@type":"Thing","name":"TN-- 1604 Inserts"},{"@type":"Thing","name":"TN-- 2204 Inserts"},{"@type":"Thing","name":"MTENN 2020"},{"@type":"Thing","name":"K16 Shank"}]}]}
62.5° DN-- 1506 Turning Holder DDNNN 2020, 125 mm Length - Teknik Makina
Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is an indexable insert holder with a 62.5° cutting angle, designed for precise turning operations using DN-- 1506 / DNMG 1104 inserts. 62.5° Cutting Angle for precise surfaces Fits DN-- 1506 and DNMG 1104 Inserts 125 mm Overall Length for stable clamping 20 mm Shank Width and Height for rigidity Quick insert change to reduce setup time Precision and stable Insert seating for consistent surface finish Engineered for accuracy, this holder features a 62.5° Cutting Angle that supports fine surface quality and repeatable results. The machined seating ensures the Indexable Insert remains firmly in place during cutting, which minimizes vibration and supports consistent tolerances. Users benefit from improved part quality with fewer reworks, because the precise fit eliminates insert movement and contributes directly to machining reliability. Fast tool changes that shorten setup and increase throughput A key advantage of this design is the easy insert replacement enabled by accessible clamping screws and a dependable clamping mechanism. Rapid swaps reduce non-cutting time and keep production cycles moving. For workshops focused on efficiency, the reduced Rüstzeiten (setup time) translates into higher effective machining hours and lower operational cost per component, as only the worn Insert is replaced rather than the entire tool body. Compact dimensions for robust support in demanding operations With a 125 mm Overall Length, and a 20 mm Shank Width and 20 mm Shank Height, the holder offers a compact, rigid footprint that resists deflection during cut loading. The Cutting Head Width of 10 mm provides focused support for the Insert edge. This combination of dimensions makes the tool suitable where stability matters, enabling deeper cuts or interrupted cuts with less risk of chatter and improved tool life. Versatile application and compatibility for production flexibility Designed to accept ISO designation DN-- 1506 (DNMG 1104) Inserts, the holder is suitable for a wide range of turning operations and adaptable Insert geometries. This versatility allows manufacturers to configure the cutting edge for different materials and machining strategies without changing the basic toolholder. As a result, workshops gain flexibility in production planning and can respond faster to varying component requirements. Choose Teknik Makina’s Turning Holder for reliable, precise machining — and contact METAV Werkzeuge for personal technical advice at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D104TM Compatible Inserts: DN-- 1506, DNMG 1104 ISO Designation: DDNNN 2020 Overall Length: 125 mm Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 10 mm Cutting Height: 40 mm Cutting Angle: 62.5° GTIN: 4061905150753 Weight: 0.404 kg Additional designation: Bezeichnung 2: K15 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder compatible with DN-- 1506 Inserts? The Turning Holder from Teknik Makina is designed specifically for DN-- 1506 (DNMG 1104) Indexable Inserts and provides a precise fit to ensure stable clamping and reliable cutting performance. How quick is the insert change on the Teknik Makina Turning Holder? Insert replacement on the Teknik Makina Turning Holder is straightforward thanks to accessible clamping screws and a secure seat design, allowing rapid swaps that reduce setup time and improve workshop efficiency. Which operations suit the Turning Holder best? The Teknik Makina Turning Holder is ideal for turning tasks and, due to its compatibility with various insert geometries, supports a range of production needs where precision and repeatability are required. What are the key dimensions to consider for machine integration? Important dimensions for integration include the 125 mm Overall Length and the 20 mm Shank Width and Height; these values help determine compatibility with tool posts and fixtures when specifying the Teknik Makina Turning Holder. 62.5° DDNNN Turning Holder for DN-- 1506 Indexable Inserts, 125 mm Length - Teknik Makina
Precision coolant delivery for demanding turning operations
Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.
How they work and where they help most
Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.
Key facts
| characteristic | detail |
|---|---|
| category | tool holders with internal coolant |
| common synonyms | internal coolant toolholders; coolant-through tool holders |
| typical application | turning, heavy machining, internal bore finishing |
| coolant routing | internal channels and boreholes delivering coolant to the insert seat |
| key technical effect | direct cooling at the cutting edge, improved chip evacuation, reduced thermal load |
| comparison | standard holders use external nozzles; internal coolant holders route coolant through the shank |
Measurable benefits for production
- Direct coolant feed reduces the thermal stress on the insert, extending tool life.
- Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
- More consistent cooling helps achieve better surface finish and dimensional stability.
- Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.
Metav: precision supply and industrial competence
Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.
In short
Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.
FAQ
When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.
Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.
What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.
How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com