High-precision clamping holders with internal coolant for extended tool life
Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.
Klemmhalter 93° SDJCL 1212 J11 für DCMT 11T3 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a robust left-hand SDJC design and precise ISO sizing to ensure stable turning with DCMT inserts; its compact 12 × 12 mm shank and 110 mm overall length support repeatable set-ups and straightforward integration into existing toollines — order directly via Metav Werkzeuge or consult our specialists for supply and compatibility advice Clamping holder SDJCL 1212 — SDJC for DCMT 11T3, left-hand, 12 × 12 mm The Clamping holder SDJCL 1212 is a left-hand SDJC toolholder designed for turning operations with DCMT 11T3 indexable inserts, optimised for stable clamping and predictable chip control in production and workshop environments Left-hand SDJC design for turning Compatible with DCMT 11T3 indexable inserts 12 × 12 mm shank for standard toolposts 110 mm overall length for compact set-ups Consistent cutting performance for left-hand turning The SDJCL 1212 offers a reliably rigid geometry that translates into consistent cutting behaviour and improved surface quality. The left-hand orientation and a cutting angle of 93° position the insert for controlled engagement, which reduces radial loads and supports predictable chip flow. For production environments this means fewer surprises at the lathe: cycle times remain stable and rework is reduced. The holder’s design focuses on repeatability rather than cosmetic features, so setup time and variability between operators are minimised. Secure clamping and reduced downtime through clear dimensions A secure clamping system and clearly defined dimensions enable fast insert changes and repeatable tool offsets. The holder features a 12 mm clamp height and a 12 × 12 mm shank, combined with a 16 mm cutting-head width and a 20 mm cutting height that together deliver a compact, stiff assembly. The modest weight of 0.132 kg and 110 mm overall length make it suitable for multi-tool turrets and smaller toolposts where balance and accessibility matter. These measurable values make programming, presetting and tool management straightforward for workshop staff. Broad compatibility and dependable sourcing for production use Compatibility is concise: the holder is made for DCMT 11T3 indexable inserts and carries the ISO designation SDJCL 1212, simplifying tool selection and procurement. Its designation and dimensions facilitate integration into existing tooling layouts without guesswork. Supplied by Teknik Cutting Tools and available through Metav Werkzeuge, the component benefits from a European supply chain that emphasises consistent stock and predictable delivery — a practical advantage when tool replacements must be swift to avoid production downtime. For reliable left-hand turning with DCMT indexable inserts, contact Metav Werkzeuge to discuss availability and ensure the SDJCL 1212 is matched to the intended application Technical data SKU: D362TM ISO designation: SDJCL 1212 For inserts: DCMT 11T3 Cutting direction: left Facts Overall length: 110 mm Shank: 12 × 12 mm Clamp height: 12 mm Cutting-head width: 16 mm Cutting height: 20 mm Weight: 0.132 kg Cutting angle: 93° Special features SDJC clamping holder for indexable inserts J11 toolholder bore designation Left-hand turning configuration Compact, stiff design for predictable set-ups FAQ Which inserts fit this holder? The holder accepts DCMT 11T3 indexable inserts; the designation SDJCL 1212 matches the common insert geometry for turning applications. Is this toolholder for left- or right-hand turning? This SDJC clamping holder is configured for left-hand cutting operations as specified by its orientation. What are the shank and clamp dimensions? The shank measures 12 × 12 mm with a clamp height of 12 mm, giving a compact and repeatable mounting reference. What is the SKU and how is the holder identified? The article is listed as D362TM and identified by the ISO designation SDJCL 1212 for clear procurement and presetting. What length and weight should be expected when balancing a turret? Expect an overall length of 110 mm and a weight of 0.132 kg, suitable for compact tool arrangements and minimal inertia effects. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 93° SDJCL 1212 J11-F for DCMT 11T3 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of the combination of precise 12 × 12 mm shank geometry, secure TA030 clamping and DCMT 11T3 compatibility for consistent turning results; order via Metav Werkzeuge or consult the technical team for confirmation. SDJC for DCMT Indexable Inserts – SDJCL 1212 clamping holder, left-hand, 12 × 12 mm (Teknik Makina) The SDJC for DCMT Indexable Inserts is a left-hand clamping holder designed for secure, repeatable turning operations with DCMT 11T3 inserts in workshop and production environments Compatible with DCMT 11T3 inserts Left-hand cutting orientation 12 × 12 mm shank cross-section TA030 clamping plate with M5 screw Consistent clamping for accurate turning results The robust clamping holder design secures indexable inserts to provide stable cutting conditions and predictable part quality. Compatibility with DCMT 11T3 inserts allows the use of standard triangular-shaped turning tips, which simplifies inventory and reduces tooling change complexity. The 12 × 12 mm shank cross-section gives a compact footprint while maintaining sufficient rigidity for light to medium turning tasks. A cutting approach of 93° keeps cutting forces well directed, helping to reduce vibration and deliver repeatable surface finishes. Fast set-up and reliable insert retention Quick and safe insert changes are enabled by the integrated TA030 clamping plate and the designated screws. The clamping plate is retained with an M5 screw, while the insert seat is secured via a Torx fixing (M3.5×8.5) tightened with a T15 key, ensuring consistent torque and repeatability from one change to the next. This arrangement reduces downtime during routine maintenance and supports stable cutting geometry after each reassembly, which in production leads to fewer in-process adjustments and higher throughput. Compact length and light weight for adaptable toolposting With an overall length of 110 mm and a mass of 0.13 kg, this holder balances accessibility and low inertia for many lathe setups. The compact form factor eases access to tight workpiece features, while the modest weight reduces additional radial loading on the turret. The left-hand cutting orientation suits operations where negative-direction cuts are required or when specific toolpath strategies are in use. The holder is identified as SDJCL 1212, matching common ISO-style designations to simplify procurement and toolroom communication. Contact Metav Werkzeuge for tailored technical advice and to source the Teknik Cutting Tools SDJC for DCMT indexable inserts (SKU D156TM) for integration into existing tooling systems Technical data Article number: D156TM Manufacturer: Teknik Makina Product: SDJC for DCMT Indexable Inserts ISO designation: SDJCL 1212 Core data Shank width: 12 mm Shank height: 12 mm Cutting-head width: 12 mm Cutting height: 20 mm Overall length: 110 mm Weight: 0.13 kg Cutting angle: 93° Direction: left Special features Compatible inserts: DCMT 11T3 Clamping plate: TA030 Clamping plate screw: M5 Torx screw: M3.5×8.5 Torx key: T15 Holder designation: SDJCL 1212 FAQ Which insert types fit this holder? The SDJC for DCMT Indexable Inserts accepts DCMT 11T3 indexable tips, allowing the use of widely available turning inserts for general-purpose machining. Is the holder suitable for left-hand turning only? This toolholder is specified for left-hand cutting direction and is intended for operations that require a negative-direction approach. What are the key dimensions to verify for toolpost compatibility? Relevant dimensions include the 12 × 12 mm shank cross-section and 110 mm overall length; these determine fit in standard tool posts and turret pockets. How is the insert retained and what fastening is required? The insert is secured via the TA030 clamping plate; the plate is fixed with an M5 screw while the insert is clamped using a M3.5×8.5 Torx screw tightened with a T15 key. Can this holder be identified by an ISO-style code? Yes, the holder carries the designation SDJCL 1212, which aids in matching the part to tooling lists and ordering documentation. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCL 1212 J11-F-IC for DCMT 11T3 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a compact, secure clamping solution that combines left-hand cutting capability with internal coolant to extend insert life and improve surface finish; its 12 x 12 mm tool head and 110 mm overall length permit tight setups and stable machining. Order or request technical advice directly via Metav Werkzeuge for quick delivery and integration planning. SDJCL 1212 clamp holder (SDJC for DCMT indexable inserts) — left-hand, internal coolant — Teknik Makina A SDJCL 1212 clamp holder designed for left-hand turning with DCMT 11T3 indexable inserts, offering internal coolant and a compact 12 x 12 mm head for reliable part machining in confined fixtures Left-hand cutting orientation Internal coolant supply 12 x 12 mm tool head 110 mm overall length Stable left-hand turning with consistent chip control The compact clamping geometry and left-hand cutting configuration deliver repeatable results in turning applications where reverse orientation is required. Fitted for DCMT 11T3 indexable inserts, the holder is engineered to keep the insert at the correct cutting angle (93°) and cutting height, ensuring predictable chip formation and surface quality. The robust design translates into fewer interruptions for insert changes and a steadier throughput in batch production. Coolant-fed performance and space-saving dimensions Internal coolant routing supports concentrated lubrication and chip evacuation directly at the cutting edge, which helps to reduce thermal load and improve insert life. With a compact 12 x 12 mm head and an overall length of 110 mm, the holder suits close-clearance tools and face-turned components where tool overhang must be minimised. The low mass (0.11 kg) and precise geometry aid vibration damping, supporting finer surface finishes and tighter tolerances on production parts. Practical fitment and service-friendly details Designed for straightforward assembly, the holder accepts the TA030 U-plate and is secured using an M5 plate screw and a Torx clamping screw (M3.5x8.5) tightened with a T15 key. The ISO designation SDJCL 1212 and bar reference J11-F-IC make specification and reordering clear in procurement documentation. Internal coolant and standardised fixings reduce setup time and match common workshop practices, enabling rapid swap-out and minimal adjustments between jobs. For integration support or to secure supply of the Teknik Cutting Tools SDJCL 1212 clamp holder with internal coolant, contact Metav Werkzeuge in Emmerich for technical advice and reliable delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: AP575TM ISO designation: SDJCL 1212 Model: SDJC for DCMT indexable inserts Manufacturer: Teknik Makina Cutting direction: left Suitable inserts: DCMT 11T3 Internal coolant: yes Facts Tool head width: 12 mm Tool head height: 12 mm Cutting head width: 12 mm Overall length: 110 mm Cutting height: 32 mm Weight: 0.11 kg Cutting angle: 93° Screw sizes: M5, M3.5x8.5 Torx key: T15 Special features Internal coolant supply For DCMT 11T3 indexable inserts Left-hand cutting orientation ISO designation SDJCL 1212 Bar designation J11-F-IC Compatible with TA030 U-plate FAQ Which indexable inserts suit this holder? The holder is specified for DCMT 11T3 indexable inserts; the SDJCL 1212 geometry ensures correct seating and reliable cutting performance with those inserts. Does the holder provide internal coolant? Yes — the SDJCL 1212 clamp holder features internal coolant routing to the insert zone for improved cooling and chip control. What is the overall length and head size? Overall length is 110 mm with a compact tool head of 12 x 12 mm, providing a small footprint for confined machining. Which screws and keys are required for assembly? Assembly uses an M5 plate screw and a Torx clamping screw M3.5x8.5, tightened with a T15 Torx key as supplied in typical workshop toolkits. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCL 1212 K07-F-IC for DCMT 0702 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a compact, flat toolholder that combines internal coolant, strict ISO compatibility and secure clamping for reliable turning operations; ideal for shops that require predictable tool life and repeatable set-ups. Order the item via Metav Werkzeuge or consult their specialists for application advice. Klemmhalter SDJC for DCMT Indexable Inserts — Flat turning toolholder with internal coolant, left-hand cut, by Teknik Makina The Klemmhalter SDJC for DCMT Indexable Inserts is a flat, left-hand toolholder designed for turning with DCMT 0702 indexable inserts and with an integrated internal coolant channel for improved chip control. Flat profile for confined turning spaces Internal coolant for controlled chip flow ISO SDJCL 1212 designation Compatible with DCMT 0702 inserts Consistent seating and repeatability for stable machining The SDJC toolholder has been engineered to deliver firm insert clamping and consistent seating, which reduces vibration and improves surface finish. The ISO designation SDJCL 1212 denotes the standardised geometry that ensures predictable positioning of DCMT 0702 inserts; this standardisation simplifies tool changes and shortens set-up times. For production environments this translates into fewer scrap parts and steadier cycle times, as tool repeatability directly affects dimensional consistency. Internal coolant for improved cutting performance and tool life An integrated internal coolant channel provides directed coolant to the cutting edge, assisting chip evacuation and cooling the cutting zone more effectively than external cooling alone. For tougher materials or longer runs, this results in reduced thermal loading on the insert and a lower risk of built‑up edge, extending insert life and maintaining surface quality. In practical terms, improved coolant delivery often reduces frequency of insert changes and supports longer uninterrupted machining cycles. Compact, flat design to reach confined workspaces The flat, space-saving profile makes this holder suitable for operations where clearance is limited. With a cross section of 12 x 12 mm and an overall length of 125 mm, the holder provides access while maintaining rigidity. The compact dimensions help on lathes and multi‑spindle machines where tool interference is a concern, enabling productive tool layouts without compromising support for the insert. A lower profile therefore supports flexible machine setup and easier access for maintenance. Secure fastening and service-friendly components to cut downtime Clamping is achieved with a Torx screw M2.5x5.5, secured via a T8 key, which simplifies repeatable tightening and replacement. The holder’s design yields a cutting height of 27 mm and a cutting angle of 93°, values that contribute to reliable cutting geometry and clearances. At a measured weight of 0.17 kg, the unit combines stiffness with low mass to minimise load on tool turrets. For maintenance, the standardised screw and compact construction permit quick insert swaps and straightforward torque application, reducing machine downtime and simplifying routine servicing. For technical queries or application matching, Metav Werkzeuge offers product guidance and specifications. Contact Metav Werkzeuge for tailored application advice or to arrange delivery of the Teknik Makina SDJC toolholder with internal coolant — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: AP573TM Article name: Klemmhalter SDJC for DCMT indexable inserts Manufacturer: Teknik Makina Numbers / Core technical data Width: 12 mm Height: 12 mm Cutting head width: 12 mm Overall length: 125 mm Cutting height: 27 mm Cutting angle: 93° Weight: 0.17 kg Screw: M2.5x5.5 (Torx) Torx key: T8 Cutting direction: left Designs / special features Internal coolant For DCMT 0702 inserts ISO designation: SDJCL 1212 Flat design (flache Ausführung) Shank designation: K07-F-IC FAQ Is this holder compatible with DCMT 0702 inserts? Yes. The SDJC holder is designed specifically for DCMT 0702 indexable inserts and fits the standard insert geometry for this size. Can the holder be used for right-hand turning operations? No. This holder has a left-hand cutting direction; for right-hand turning a corresponding right-hand variant is required. Does the holder provide through-tool coolant? Yes. The unit includes an internal coolant channel to direct coolant towards the cutting edge and improve chip evacuation. What fastener and key are used to secure the insert? The clamping screw is M2.5x5.5 (Torx) and the required key size is T8 for insert clamping and replacement. Which machines and applications suit this holder? The flat profile and compact 12 x 12 mm cross section make it suitable for lathes and machines with limited clearance, especially in turning operations that use DCMT 0702 inserts for general turning and finishing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCL 1212 K07-IC für DCMT 0702 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a compact, rigid turning solution that combines secure clamping, internal coolant and compatibility with standard DCMT indexable inserts; order directly via Metav Werkzeuge or request advice from our consultants for seamless integration. SDJCL 1212 SDJC clamping holder for DCMT indexable inserts — left‑hand, internal coolant (Teknik Makina) A SDJCL 1212 clamping holder engineered for left‑hand turning with DCMT 0702 indexable inserts, providing rigid support and controlled coolant supply for medium‑duty turning tasks. Internal coolant supply for controlled chip flow Compatible with DCMT 0702 indexable inserts Left‑hand design for standard turning operations Secure clamping with M2.5 Torx screw (T8) Rigid support for consistent turning results The holder is designed to deliver rigidity and repeatability in shop environments where stable tool presentation matters. Its 16 mm height and 16 mm width provide a solid contact surface that reduces chatter and improves surface finish when using compatible inserts. With a 125 mm length, the assembly balances reach and stiffness for many common turning set‑ups. This structural balance translates into fewer rejected parts and more predictable cycle times on the machine. Controlled coolant and improved chip management An integrated internal coolant channel keeps the cutting edge supplied directly at the insert seat, which aids chip evacuation and cooling at the cutting zone. This targeted supply reduces thermal loads on the insert and helps sustain cutting edge life during interrupted cuts or heavier feeds. For workshops aiming to lengthen insert life and cut downtime, the coolant capability is a practical feature that supports higher process stability. Secure clamping with straightforward maintenance Clamping is effected via an M2.5 Torx screw (screw length M2.5x5.5) tightened with a T8 key, ensuring reliable retention of the indexable insert under cutting forces. The toolholder’s cutting head width of 12 mm and 16 mm cutting height match the geometry of common DCMT 0702 inserts, providing repeatable seat location and straightforward insert changes. Fewer adjustment steps are required during routine maintenance, which simplifies set‑up and reduces non‑productive time. Workshop compatibility and practical handling Designed for left‑hand cutting, the holder suits applications that demand cutting in that direction and integrates with standard boring‑bar designations such as K07‑IC. Weighing 0.17 kg, the component is light to handle while still offering the mass needed for stability. The 93° cutting angle supports conventional turning geometries, making this holder a versatile choice for mixed production runs where DCMT inserts are already in use. For technical procurement and to discuss suitability for specific turning tasks, contact Metav Werkzeuge for expert advice on the Teknik Cutting Tools SDJCL 1212 clamping holder — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: AP565TM ISO designation: SDJCL 1212 Manufacturer: Teknik Makina Facts Width: 16 mm Height: 16 mm Cutting head width: 12 mm Cutting height: 16 mm Overall length: 125 mm Weight: 0.17 kg Cutting angle: 93° Screw: M2.5x5.5 Torx key: T8 Cutting direction: left Special features Internal coolant For DCMT 0702 indexable inserts Compatible with K07‑IC shank designation Left‑hand turning configuration Secure Torx clamping FAQ Which insert type is compatible with this clamping holder? The clamping holder accepts DCMT 0702 indexable inserts; the geometry and seat height are matched to this insert size for correct positioning and reliable performance. Is the coolant supply internal or external? The toolholder features internal coolant, directing fluid to the insert seat to support chip evacuation and lower cutting temperatures during operation. Can this holder be used for right‑hand turning? This specific model is configured for left‑hand turning; for right‑hand applications, a corresponding right‑hand holder should be selected. What fastening hardware is required for secure clamping? Clamping uses an M2.5 Torx screw (M2.5x5.5) tightened with a T8 key to ensure consistent insert retention under cutting loads. What is the article number for ordering and reference? Reference the SKU AP565TM when enquiring or ordering the SDJCL 1212 clamping holder from Teknik Cutting Tools Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCL 1616 H07-F for DCMT 0702 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a precise, left‑hand turning solution that pairs stable clamping with broad compatibility for DCMT 0702 inserts; its compact 16 × 16 mm shank and flat profile support predictable cutting forces and simple organisation on the toolpost. Order or request tailored advice via Metav Werkzeuge for fast, reliable delivery and application guidance. SDJC for DCMT Indexable Inserts (SDJCL 1616) — Left‑hand turning toolholder, 16 × 16 mm (Teknik Makina) The SDJC for DCMT Indexable Inserts (SDJCL 1616) is a flat‑profile toolholder designed for left‑hand turning operations, compatible with DCMT 0702 indexable inserts and optimised for stable, repeatable clamping in workshop and production environments Left‑hand cutting, 93° cutting angle Compatible with DCMT 0702 inserts Shank 16 × 16 mm, flat design M2.5×5.5 Torx screw, T8 key Precision clamping for consistent turning results The flat, square shank of this insert holder provides a rigid mounting base that reduces micro‑movement during cuts. With a 16 × 16 mm shank cross‑section and a 18 mm cutting height, the configuration is aimed at delivering reproducible contact between insert and workpiece, which helps maintain dimensional stability across serial turning tasks. The modest 0.15 kg mass contributes to quick handling and reduced inertia during set‑up, while the solid clamping geometry supports a 93° cutting angle that is well suited to general turning and facing operations where consistent chip formation and surface finish are priorities. Fast setup and wide compatibility with standard inserts Engineered to accept standard DCMT 0702 indexable inserts, the holder simplifies inventory choices and reduces downtime for insert changes. Clamping is secured using an M2.5×5.5 Torx screw operated with a T8 key, enabling quick, repeatable insert replacement without special tools. The ISO designation SDJCL 1616 identifies the holder’s nominal interface and assists in process planning, while the H07‑F shank designation clarifies the mounting form for compatibility with a wide range of toolposts. The 100 mm overall length provides a balanced reach for many bench and lathe setups, keeping overhang and vibration in check for improved tool life. Flat profile and left‑hand geometry for dependable machining The flat version of this holder reduces unwanted rotation in the pocket and aligns the insert geometry for predictable cutting forces. Its left‑hand cutting direction is specified for operations where tool approach and lathe orientation demand mirrored tool geometry, ensuring correct chip evacuation and surface contact. The compact head width of 16 mm and the well‑defined cutting head shape support controlled chip flow and make the holder suitable for both roughing and finishing feeds when paired with the appropriate DCMT insert grade. For secure left‑hand turning with DCMT 0702 inserts, contact Metav Werkzeuge for ordering and technical advice based on Teknik Makina specifications: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D155TM Manufacturer: Teknik Makina ISO designation: SDJCL 1616 Shank designation: H07‑F Facts Shank width: 16 mm Shank height: 16 mm Cutting head width: 16 mm Cutting height: 18 mm Overall length: 100 mm Weight: 0.15 kg Cutting angle: 93° Special features Flat version For DCMT 0702 indexable inserts M2.5×5.5 Torx screw T8 Torx key Left‑hand cutting direction SDJCL 1616 interface FAQ Which inserts fit this holder best? The holder accepts DCMT 0702 indexable inserts; pairing those inserts with the SDJCL 1616 interface (SKU D155TM) ensures correct seating and reliable cutting performance. Is the toolholder right‑hand or left‑hand? This toolholder is specified for left‑hand cutting, configured to match lathe tool posts and operations that require mirrored tool geometry. What fastening hardware is required for insert clamping? Clamping uses an M2.5×5.5 Torx screw secured with a T8 key, enabling swift insert changes without specialised tooling. What are the shank dimensions and overall reach? The shank is 16 × 16 mm and the overall length is 100 mm, offering a compact footprint with controlled overhang suitable for many turning setups. What cutting height and angle does the holder provide? The holder presents an 18 mm cutting height and a 93° cutting angle, supporting stable contact geometry for consistent chip control and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCL 2020 K07-IC for DCMT 0702 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Combine secure clamping, integrated coolant and compact geometry to achieve consistent left‑hand turning performance; order the clamping holder directly via Metav Werkzeuge or ask our consultants if required. Clamping holder SDJCL 2020 — SDJC for DCMT indexable inserts, internal coolant, left‑hand (Teknik Makina) The Clamping holder SDJCL 2020 is a left‑hand SDJC‑style toolholder engineered for DCMT 0702 indexable inserts, offering internal coolant routing and a compact 20 x 20 mm shank for stable turning in production environments SDJCL 2020 design for DCMT 0702 inserts Internal coolant supply Torx clamping screw M2.5x5.5 (T8) Robust 20 x 20 mm shank, 125 mm overall length Stable left‑hand turning with controlled chip evacuation The holder’s primary advantage is its combination of a compact geometry and integrated coolant, which supports reliable chip control and consistent surface finishes. With a defined 93° cutting angle and a design tailored to DCMT 0702 inserts, the assembly reduces vibration and improves insert life by directing coolant precisely to the cutting edge. This rational setup leads to higher process stability and predictable machining results, making the component suitable for series production where reproducibility matters. The internal coolant passage also helps maintain lower cutting temperatures, which is beneficial for tool life without adding complexity to machine setup. Precise clamping and straightforward maintenance for rapid insert changes Mechanical design focuses on repeatable clamping and ease of service. The 20 x 20 mm shank and 25 mm cutting‑head width provide a rigid foundation, while the clamping is secured with a M2.5x5.5 Torx screw operated with a T8 key. A clear nominal cutting height of 27 mm and an overall length of 125 mm ensure predictable tool engagement and compatibility with common turret systems. These measurable dimensions make tool offsets simple to calculate and reduce setup time at changeover. The low mass of 0.4 kg contributes to reduced inertial load on the toolpost, preserving balance and repeatability in automated cycles. Designed for workshop integration and operator confidence Built for practical use, the toolholder combines standardised interfaces with a compact footprint so it fits a wide range of lathes that accept SDJC‑style assemblies. The option for internal coolant supports operations where heat management and chip flushing are required, improving operator comfort and downstream process reliability. Clear technical specs and standard connection hardware permit straightforward stock keeping and tool planning, while the robust construction gives a sense of long‑term dependability. If further clarification is needed on compatibility with a specific machine or insert grade, Metav’s technical team can advise on seamless integration into existing toolsets. Request a technical consultation from Metav Werkzeuge to confirm fitment and optimise turning parameters for this Teknik Makina clamping holder SDJCL 2020 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: AP567TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Designation: SDJC for DCMT Indexable Inserts ISO designation: SDJCL 2020 Cutting direction: left Internal coolant: yes Compatible inserts: DCMT 0702 Compatible boring bar: K07-IC Torx screw: M2.5x5.5 (T8) SKU: AP567TM Facts Shank width: 20 mm Shank height: 20 mm Cutting‑head width: 25 mm Cutting height: 27 mm Overall length: 125 mm Overall height: 20 mm Cutting angle: 93° Weight: 0.4 kg Special features Left‑hand SDJC‑style clamping geometry Internal coolant routing to the insert zone Torx clamping screw for secure fastening Designed for DCMT 0702 indexable inserts Compact, production‑ready form factor FAQ What insert type fits this holder? The holder is specified for DCMT 0702 indexable inserts and is optimised for their geometry when used with the SDJCL 2020 clamping configuration. Is the coolant delivered through the holder? Yes, the clamping holder features internal coolant routing to the insert pocket to support chip evacuation and temperature control. Which cutting direction is supported? The toolholder is configured for left‑hand cutting operations, suitable for left‑hand turning setups. What are the key mounting dimensions to check? Important dimensions include the 20 x 20 mm shank, 125 mm overall length and 27 mm cutting height; these allow alignment with turret and toolpost requirements. What tool is required to secure the insert? Clamping is performed with a Torx screw M2.5x5.5 and a T8 key is used for tightening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCL 2525 M11 For DCMT 11T3 Inserts Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a compact left-hand turning solution with 30 mm cutting height and a 150 mm overall length for stable machining and simple integration; order the clamp holder directly via Metav Werkzeuge or consult the technical team for alignment and delivery. Clamp holder SDJCL 2525 — SDJC for DCMT Indexable Inserts (left-hand) by Teknik Makina The clamp holder SDJCL 2525 is a left-hand turning toolholder designed for secure use with DCMT 11T3 indexable inserts in conventional and CNC lathes. Left-hand turning orientation For DCMT 11T3 indexable inserts Cutting height 30 mm Overall length 150 mm Precise clamping for consistent surface finishes The SDJCL 2525 toolholder combines a rigid clamping geometry with a defined cutting height 30 mm to maintain a constant tool tip position during turning operations. This precision clamping reduces set-up time and minimises run-out, which helps to keep repeatability high when changing inserts. Compatibility with standard DCMT 11T3 indexable inserts simplifies tooling choices and supports consistent surface quality across batches. The left-hand configuration ensures correct rake and approach geometry for left-hand turning tasks. Predictable chip flow and stable cutting behaviour An accurately specified 93° cutting angle and robust head dimensions (head width 32 mm) promote predictable chip formation and assist in maintaining steady cutting forces. Stable chip control lowers chatter risk and supports longer insert life by avoiding irregular loads at the cutting edge. The toolholder’s geometry is designed to work in tandem with negative-indexable inserts, meaning that cutting forces are directed into the holder body for superior rigidity under moderate to heavy cuts. Compact construction for easy machine integration A compact profile with a holder width of 25 mm and an overall length 150 mm enables straightforward installation in tight tool turrets and gang setups. The clamping screw thread (M11) and the ISO designation SDJCL 2525 conform to common workshop practices, simplifying retrofitting and repeatable mountings. With a mass of 0.735 kg, the component balances inertia and rigidity to suit a wide range of turning operations while keeping dynamic loads manageable for many turret systems. Designed for reliable workshop use The product supports a clear tool specification approach: SDJCL 2525 identifies the holder geometry, while the use of DCMT 11T3 inserts provides broad availability of grades and chipbreakers to match workpiece materials. The combination of measurable dimensions—cutting height, head width and overall length—offers a verifiable basis for tooling plans and machining simulations. For production environments seeking dependable, repeatable turning results, the holder contributes to process stability and predictable tool change behaviour. For workplaces requiring a left-hand turning toolholder from Teknik Makina, contact Metav Werkzeuge for exact-fit advice and dependable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D368TM Manufacturer: Teknik Makina ISO designation: SDJCL 2525 For inserts: DCMT 11T3 Facts Cutting height: 30 mm Head width: 32 mm Holder width: 25 mm Overall length: 150 mm Weight: 0.735 kg Cutting angle: 93° Cutting direction: left Clamping screw thread: M11 Special features Left-hand turning orientation Compatible with DCMT indexable inserts ISO toolholder designation SDJCL 2525 Compact profile for turret integration FAQ What insert type fits this holder? The SDJCL 2525 clamp holder accepts DCMT 11T3 indexable inserts; the holder geometry is matched to the insert form for secure seating and repeatable positioning. Is the clamp holder suitable for CNC turret systems? Yes — the compact dimensions (overall length 150 mm, head width 32 mm) and standard M11 clamping make the holder appropriate for many turret and gang-tool setups in CNC turning centres. Which cutting direction is supported? This holder is configured for left-hand turning operations; the orientation aligns the insert rake and clearance for left-hand cuts. How does the cutting height affect setup? A defined cutting height of 30 mm ensures the insert tip sits at a consistent reference plane, simplifying turret alignment and reducing the need for shim adjustments. Can the holder be used with different DCMT insert grades? Yes — the holder accepts standard DCMT 11T3 grades and chipbreaker styles, allowing selection of carbide grades suited to the workpiece material and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 1010 J07 für DCMT 0702 Innenkühlung rechtsschneidend - Teknik Makina
Take advantage of the compact 93° cutting geometry, reliable fit for DCMT 0702 indexable inserts and a slim 110 mm overall length for stable right‑hand turning; order or request specification advice via Metav Werkzeuge. Clamping holder SDJCR 1010 by Teknik Cutting Tools — 93° right‑hand toolholder for DCMT 0702 inserts Clamping holder SDJCR 1010 for right‑hand turning with DCMT 0702 indexable inserts, designed for precise, repeatable face and external turning in general workshop and light industrial applications 93° cutting geometry for stable engagement Compatible with DCMT 0702 indexable inserts ISO SDJCR 1010 designation for easy selection Lightweight 0.097 kg for fast tool changes Compact geometry that improves cutting stability The SDJCR 1010 clamping holder offers a short, rigid layout that concentrates stiffness at the cutting zone. With an overall length of 110 mm and a cutting height of 15 mm, the geometry reduces overhang and vibration, which in turn supports consistent surface finish and repeatable dimensions. The 93° cutting angle provides a secure approach to the workpiece with modest clearance behind the insert; this makes the holder well suited to controlled finishing cuts as well as general turning operations where dimensional stability is key. The modest mass of 0.097 kg aids quick tool changes while keeping dynamic balance during high‑speed revolutions. Proven compatibility and practical advantages for indexable inserts Engineered specifically for DCMT 0702 indexable inserts, the holder accepts the common triangular insert format and secures it with a robust clamp mechanism aligned to ISO SDJCR 1010. The adapter's cutting head width of 12 mm and holder width of 10 mm support a compact insert pocket while the J07 shank designation ensures correct seating in compatible boring bars or tool posts. Using indexable inserts lowers operating costs by enabling rapid indexing or replacement of just the cutting tip rather than the whole tool, improving uptime in production. For users with limited technical background, an indexable system also simplifies inventory: one holder plus a stock of inserts covers a range of turning tasks. Workshop benefits: quick set‑up, consistency and supply confidence A right‑hand orientation and clearly marked ISO code simplify tool selection and set‑up, reducing machine downtime. The holder's slim form facilitates access in confined jigging or multi‑tool turret layouts, while the 15 mm cutting height positions the insert accurately in the cutting plane to help maintain centreline alignment across tool changes. Metav's distribution ensures prompt supply from stock and professional advice when required; combined with decades of metrology and tooling experience, this offers a dependable logistics and specification channel for workshops seeking predictable performance and steady availability. For tailored technical advice or to specify the Teknik Cutting Tools SDJCR 1010 for a particular turning application, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: D220TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina ISO designation: SDJCR 1010 For inserts: DCMT 0702 Shank designation: J07 Cutting direction: right Numbers / Core technical data Overall length: 110 mm Weight: 0.097 kg Cutting height: 15 mm Cutting head width: 12 mm Holder width: 10 mm Holder height: 10 mm Cutting angle: 93° Special features Right‑hand toolholder Compatible with DCMT 0702 indexable inserts ISO‑coded for easy identification Lightweight design for quick tool changes Robust clamp for secure insert retention FAQ What inserts fit this holder? The clamping holder SDJCR 1010 is designed for DCMT 0702 indexable inserts and secures them in the standard pocket specified by the ISO designation. Is the holder suitable for right‑hand turning only? Yes, the toolholder is configured for right‑hand cutting direction as specified in the product data. What is the ISO code for simple replacement and ordering? The holder carries the ISO designation SDJCR 1010, which simplifies matching with equivalent holders and ordering of spares. What are the key dimensions to check for machine compatibility? Important dimensions include overall length 110 mm, cutting height 15 mm, and the J07 shank designation; these determine fit in tool posts and turrets. Can the holder be used for finishing and roughing operations? The compact geometry and 93° cutting angle make the holder suitable for controlled finishing and general turning; insert grade and machining parameters should be chosen according to the workpiece material. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 1212 J07-F for DCMT 0702 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Compact flat clamping holder with ISO designation SDJCR 1212, compatible with DCMT 0702 indexable inserts and a right‑hand cutting orientation. Benefit from a stable clamping interface, compact 12 mm head and 110 mm overall length for improved access and repeatable results. Order the clamping holder directly via Metav Werkzeuge or consult the technical advisors for application guidance. Klemmhalter — SDJC for DCMT Indexable Inserts (right‑hand, flat design) by Teknik Makina The Klemmhalter is a right‑hand, flat clamping holder for DCMT 0702 indexable inserts, designed for reliable turning operations and straightforward integration into standard shanks. Right-hand, flat clamping holder Compatible with DCMT 0702 inserts ISO designation SDJCR 1212 12 mm head, 110 mm overall length Reliable clamping for consistent turning results Stable clamping is essential for repeatable machining. The Klemmhalter flat clamping holder secures DCMT 0702 indexable inserts with repeatable seating and minimal micro‑movement. The precision clamping geometry and right‑hand orientation support stable cutting forces, which reduces vibration and improves surface finish. For workshops focused on consistent part quality, this holder helps to lower setup time and scrap rates by providing a dependable interface between insert and toolpost. Compact dimensions for improved rigidity and access A compact footprint delivers practical benefits at the machine. The low‑profile head of 12 mm combined with a 12 mm height and an 110 mm overall length improves access to tight bores and shoulders while maintaining rigidity near the cutting edge. The lightweight construction (0.131 kg) reduces turret inertia, enabling quicker tool indexing and less mechanical load on the carriage. This compactness supports shorter cycle times and steadier finishing passes where space and stiffness are critical. Designed for quick integration and low downtime Integration into existing tool systems is straightforward. The toolholder carries the ISO designation SDJCR 1212, indicating a standardised geometry, and matches shanks designated J07‑F for direct mounting in compatible toolposts or adaptors. The flat design and a cutting angle of 93° make the component suitable for general turning and light finishing operations using standard insert grades. Supplied by Teknik Cutting Tools and stocked through Metav, the holder simplifies procurement and replacement planning for production and maintenance schedules. For procurement and application assistance, order the Teknik Cutting Tools SDJC clamping holder (SKU D454TM) via Metav Werkzeuge or contact the technical team in Emmerich at info@metav-werkzeuge.com / +49 2822 7131930 to discuss compatibility and mounting requirements Technical data Article number: D454TM Manufacturer: Teknik Makina Product name: SDJC for DCMT indexable inserts ISO designation: SDJCR 1212 Dimensions & weights Overall length: 110 mm Head width: 12 mm Head height: 12 mm Weight: 0.131 kg Cutting angle: 93° Compatibility & features Compatible inserts: DCMT 0702 Cutting direction: right Shank designation: J07‑F Flat design (low-profile clamping) FAQ Which inserts fit this clamping holder? The SDJC clamping holder is designed specifically for DCMT 0702 indexable inserts; the pocket geometry ensures secure seating for these inserts. Is this holder right‑hand or left‑hand? This item is a right‑hand holder, specified as right in the technical data, intended for right‑hand cutting operations. What does the ISO code SDJCR 1212 indicate? The ISO designation SDJCR 1212 describes the standardised toolholder geometry and nominal head/shank sizing used to ensure compatibility with matching insert types and mounting systems. Which shank or adaptor fits this toolholder? The holder pairs with shanks designated J07‑F, allowing direct mounting into toolposts or adaptors that accept that profile. Is the flat design suitable for finishing passes? The flat, low‑profile layout combined with a 12 mm head and 93° cutting angle provides the stiffness and accessibility beneficial for finishing passes when used with the correct insert grade and cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 1212 J11 for DCMT 11T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, ISO‑rated toolholder that combines standard compatibility with precise geometry for consistent turning results; the robust SDJCR 1212 configuration and a 12 mm shank width ensure stable clamping and predictable chip flow. Order directly via Metav Werkzeuge or contact our consultants for specification support. SDJCR 1212 toolholder by Teknik Makina — right‑hand, for DCMT inserts The SDJCR 1212 is a right‑hand SDJC toolholder designed to accept DCMT 11T3 indexable inserts for precision turning tasks in general machining and workshop environments. SDJCR 1212 ISO designation Right‑hand turning geometry Fits DCMT 11T3 indexable inserts 12 mm shank width, 110 mm overall length Stable clamping for reliable turning results The SDJCR 1212 toolholder is built around a proven clamping concept that secures DCMT 11T3 inserts with consistent alignment. The ISO designation signals compatibility across standard insert ranges, reducing setup time and inventory complexity. With a right‑hand cutting orientation and a straightforward insert seat, the holder delivers repeatable contact between insert and workpiece; this helps to maintain surface finish quality and tool life across serial production and one‑off jobs alike. For workshops seeking predictable performance, the emphasis on standardisation is a clear operational advantage. Compact dimensions that improve rigidity and access Key dimensions—12 mm shank width, 16 mm cutting head width and 110 mm overall length—are balanced to offer stiffness without excessive overhang. The 20 mm cutting edge height and a 93° cutting angle provide a positive geometry for general turning and profiling, allowing controlled chip formation and clearance. A low mass of 0.132 kg means less inertial load on the turret during rapid programme changes, while the compact design aids access in tighter setups. In practice, these measured proportions translate into reduced chatter risk and more stable machining on medium‑duty lathes. Practical workflow benefits and compatibility Designed around the widely used DCMT insert format, this SDJC toolholder makes insert replacement and tool setup straightforward for production and maintenance teams. The shank designation J11 indicates the fitting standard for the mounting bar, simplifying procurement and spare‑part planning. Right‑hand orientation aligns cutting forces predictably for conventional lathe feeds, assisting with toolpath planning and fixture design. By relying on standardised insert geometry and an ISO toolholder, shops can lower logistical friction and focus on cycle‑time optimisation rather than bespoke tooling. Suited for workshops and production environments This toolholder is aimed at machine shops, subcontract manufacturers and maintenance departments requiring dependable turning accessories that integrate into existing toolholding systems. The combination of ISO conformity, compact geometry and insert compatibility supports a broad range of materials and turning tasks when matched with the appropriate DCMT grade. The result is a pragmatic, cost‑efficient upgrade for setups that demand fast changeovers and steady repeatability rather than high‑specialty tooling. For purchase advice or to secure the Teknik Makina SDJCR 1212 toolholder through Metav Werkzeuge—taking advantage of our sourcing and workshop expertise—please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored consultation and order support. Technical data Article number: D222TM Manufacturer: Teknik Makina ISO designation: SDJCR 1212 Fits inserts: DCMT 11T3 Shank designation: J11 Key dimensions Shank width: 12 mm Cutting head width: 16 mm Cutting edge height: 20 mm Cutting angle: 93° Overall length: 110 mm Weight: 0.132 kg Compatibility & special features Right‑hand cutting direction SDJC holder type for DCMT inserts ISO‑standard insert seat Compact, high‑stiffness geometry FAQ What insert type does this holder accept? The SDJCR 1212 toolholder accepts DCMT 11T3 indexable inserts and is designed for standard DCMT insert geometry. Is the toolholder right‑hand or left‑hand? This model is supplied in a right‑hand configuration suitable for conventional turning directions. Which shank width and overall length are specified? The holder features a 12 mm shank width and an overall length of 110 mm, offering a compact, stiff arrangement. Can this holder be used across different lathes? Yes; the ISO designation and J11 shank fitting support compatibility with compatible turret bars and holders in many workshop setups. Who manufactures the product and where can it be obtained? The toolholder is produced by Teknik Makina and can be sourced through Metav Werkzeuge; for procurement and specification advice contact Metav Werkzeuge GmbH. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 1212 K07-F-IC for DCMT 0702 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact right‑hand turning holder with internal coolant and a stable 93° cutting geometry for reliable chip control and repeatable seating; order directly via Metav Werkzeuge or contact the consultants for tailored application advice. Klemmhalter SDJC for DCMT Indexable Inserts — right‑hand holder with internal coolant (Teknik Makina) Klemmhalter SDJC for DCMT Indexable Inserts designed for right‑hand turning operations with internal coolant delivery, compatible with DCMT 0702 carbide inserts SDJCR 1212 ISO designation Internal coolant channel 93° cutting geometry for stable cuts Suitable for DCMT 0702 inserts Deliver consistent turning cycles with coolant‑assisted chip control A toolholder with an internal coolant channel reduces heat build‑up at the cutting edge and improves chip evacuation, which directly extends insert life and cycle stability. The holder’s 93° cutting geometry is engineered to provide a predictable cutting angle that stabilises forces during right‑hand turning, minimising vibration on thin or long workpieces. For workshop planners, this translates into fewer insert changes and more predictable machining windows for series production. Quick, repeatable insert clamping and secure mounting The flat clamping design uses the SDJCR 1212 ISO form to guarantee consistent seating of DCMT inserts; this results in repeatable tool offsets and simpler re‑setting after tool changes. Mechanical details include the specified Torx fixing M2.5x5.5 paired with a T8 key and a shank designation K07‑F‑IC, which together enable fast, toolroom‑standard maintenance. Dimensional consistency is delivered by the 12 x 12 mm head and body interface and an overall length of 125 mm, keeping reach and rigidity balanced for typical turning tasks. Compact construction for robust shopfloor performance The holder’s compact profile—12 x 12 mm clamping dimensions and a cutting height of 27 mm—is matched with a modest mass of 0.18 kg, yielding a combination of rigidity and low inertia useful for frequent tool indexing and shorter cycle times. Compatibility with DCMT 0702 inserts makes the holder a versatile option for component turning across a range of steels and non‑ferrous materials when paired with the correct insert grade. The right‑hand orientation supports standard lathe setups and cutting directions, reducing the need for fixturing changes. Contact Metav Werkzeuge for application guidance and to secure the Teknik Cutting Tools SDJC holder (SKU AP569TM) with internal coolant—technical consultants are available by e‑mail or phone from Emmerich for specification checks and order coordination Technical data Article number: AP569TM ISO designation: SDJCR 1212 Suitable inserts: DCMT 0702 Cutting direction: right Internal coolant: yes Torx screw: M2.5x5.5 Torx key: T8 Shank designation: K07‑F‑IC Weight: 0.18 kg Core measurements Clamping width: 12 mm Clamping height: 12 mm Cutting head width: 12 mm Cutting height: 27 mm Overall length: 125 mm Cutting angle: 93° Features / Compatibility Internal coolant channel Right‑hand turning For DCMT 0702 indexable inserts Torx fastening M2.5x5.5 with T8 key ISO form SDJCR 1212 Shank designation K07‑F‑IC FAQ Which inserts fit this holder? The holder is compatible with DCMT 0702 indexable inserts; the SDJCR 1212 form ensures correct seating for standard DCMT‑style carbide grades. Is internal coolant supplied through the tool? Yes, the clamping holder features an internal coolant channel to assist cooling and chip evacuation during turning operations. What is the fixing method for the insert? Insert clamping uses a Torx screw M2.5x5.5 tightened with a T8 key, providing secure and repeatable clamping for the insert seat. Can this holder be used for left‑hand turning? The toolholder is configured for right‑hand turning; left‑hand applications require a dedicated left‑hand holder. What is the SKU and who manufactures the holder? The item is sold under SKU AP569TM and supplied as the SDJC clamping holder by Teknik Cutting Tools Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 1616 H07-F for DCMT 0702 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, industry-ready holder that combines precise clamping geometry and straightforward compatibility with standard DCMT inserts for reliable turning results; order directly via Metav Werkzeuge or consult Metav’s technical team for application advice. Klemmhalter SDJC for DCMT Indexable Inserts — SDJCR 1616, right-hand toolholder The Klemmhalter SDJC for DCMT Indexable Inserts is a right-hand turning toolholder engineered for light to medium turning operations with DCMT 0702 inserts, offering a compact 100 mm overall length and stable 16 × 16 mm cross-section. SDJCR 1616 form factor, 16 × 16 mm Suitable for DCMT 0702 inserts Right-hand orientation, 93° cutting angle 100 mm overall length, 0.192 kg weight Consistent clamping for repeatable turning quality The compact clamping head is designed to deliver stable seating for triangular DCMT-style inserts, ensuring repeatable positioning across changeovers. With a 16 mm width and height, the holder achieves predictable rigidity without adding unnecessary overhang, which helps to reduce vibration and maintain surface finish. The integrated geometry is deliberately simple: a flat, secure seat combined with a reliable clamping screw arrangement produces uniform contact pressure, making the toolholder suitable for batch production where consistent results are essential. Compact dimensions that improve process control A short 100 mm overall length and a small 16 × 16 mm cross-section reduce cantilever effects on the lathe, yielding improved dimensional control and lower tool deflection during cuts. The 93° cutting angle positions the insert for effective chip formation in standard turning applications, while the modest mass of 0.192 kg minimises dynamic loading on the toolpost. These measured dimensions translate into tangible process benefits: better tolerance adherence, longer insert life through reduced chatter, and a smaller footprint that eases fixture planning on multi-station setups. Compatibility and practical handling in the workshop Designed for DCMT 0702 inserts, the holder conforms to widely used insert dimensions, simplifying inventory and enabling quick replacements. The ISO designation SDJCR 1616 indicates the shank and cutting-head geometry, which matches many turret and bar setups; the bore-bar reference H07-F is provided for users requiring matched boring-bar adaptors. The right-hand orientation aligns with conventional lathe spindle directions, avoiding confusion during tool setup and reducing setup time while supporting standard machining strategies. Built for reliable day-to-day use with clear benefits This solid toolholder emphasises straightforward function over complexity: the clamping concept and proven geometry make maintenance and cutter changes fast, lowering machine downtime. For workshops aiming to balance precision with cost-effective stocking, the holder offers a dependable option that integrates with existing DCMT insert inventories. Clear, measurable specifications ease procurement decisions and support production planners in selecting the right holder for turning tasks where stability and repeatability are priorities. For a reliable SDJCR 1616 right-hand toolholder from Teknik Cutting Tools, contact Metav Werkzeuge for ordering and tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: D456TM Manufacturer: Teknik Makina Designation: SDJC for DCMT Indexable Inserts ISO designation: SDJCR 1616 Weight: 0.192 kg Facts Overall length: 100 mm Shank width: 16 mm Shank height: 16 mm Cutting-head width: 16 mm Cutting angle: 93° Weight: 0.192 kg Special features Suitable for DCMT 0702 indexable inserts Right-hand cutting direction Boring-bar reference: H07-F eClass: 21181004 FAQ What insert type fits this holder? The holder accepts DCMT 0702 indexable inserts; its seat and clamping geometry are matched to that insert size for secure positioning. Is this toolholder right- or left-hand? This is a right-hand toolholder (ISO designation SDJCR 1616), intended for conventional right-hand turning operations. What are the shank dimensions and length? Shank dimensions are 16 × 16 mm with an overall length of 100 mm, providing a compact profile suitable for reduced overhang. Which manufacturers supply this holder? The holder is supplied by Teknik Makina and stocked through Metav Werkzeuge; see SKU D456TM for ordering and compatibility checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 1616 H07-IC For DCMT 0702 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from the combination of stable clamping and internal coolant plus a compact 100 mm overall length for flexible workshop use; these features contribute to secure insertion retention and improved chip control during right-hand turning. Order the SDJCR 1616 clamp holder directly via Metav Werkzeuge or contact our consultants for application advice. SDJCR 1616 SDJC Clamp holder for DCMT indexable inserts — right-hand, internal coolant Clamp holder for right-hand turning, compatible with DCMT 0702 indexable inserts and designed for secure clamping in industrial turning applications SDJCR 1616 ISO designation, right-hand Internal coolant for improved chip evacuation Compatible with DCMT 0702 indexable inserts 100 mm overall length, 16 x 16 mm shank Precision clamping that stabilises every cut The SDJCR 1616 toolholder is engineered to provide secure clamping and consistent repeatability in turning cycles. With a 16 x 16 mm shank and a 20 mm cutting-head width, the holder reduces vibration and runout, which translates into improved surface finish and tighter dimensional tolerances. The modest mass (0.21 kg) keeps inertial loads low while the specified cutting height of 27 mm ensures correct insert seating for predictable engagement. These attributes make the holder suitable for both repetitive production runs and precision workshop work, where stability and repeatable results matter. Internal coolant improves chip evacuation and insert life Equipped with internal coolant, the holder channels cutting fluid directly to the cutting zone to aid chip evacuation and temperature control. This targeted coolant delivery helps to reduce thermal load on the insert and workpiece, often allowing higher cutting speeds and longer insert life without compromising surface integrity. For operations that demand consistent finish and extended tool life, the internal coolant option provides an immediate, measurable benefit by lowering the risk of built-up edge and reducing the need for frequent insert changes. Simple assembly and broad compatibility for efficient setup Compatibility with DCMT 0702 indexable inserts makes this clamp holder a practical choice for many turning applications. The assembly uses a M2.5×5.5 Torx screw and a T8 Torx key, enabling secure, quick insert changes and straightforward maintenance routines. With a 100 mm overall length and a 93° cutting angle, the holder is optimised for right-hand cutting directions and integrates easily into existing setups that accept the H07-IC boring-bar designation. The compact form factor supports accessibility in tight work areas and contributes to predictable tool geometry for a wide range of turning tasks. Discuss the SDJCR 1616 clamp holder with Metav Werkzeuge for tailored recommendations and reliable supply from Emmerich — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: AP561TM Manufacturer: Teknik Makina Model / designation: SDJCR 1616 Product type: SDJC for DCMT indexable inserts Weight: 0.21 kg Facts Shank width: 16 mm Shank height: 16 mm Cutting-head width: 20 mm Cutting height: 27 mm Overall length: 100 mm Cutting angle: 93° Cutting direction: right Special features Internal coolant: yes Compatible inserts: DCMT 0702 Fastening: M2.5×5.5 Torx screw Key required: T8 Torx Boring-bar designation: H07-IC FAQ Which inserts fit this holder best? The clamp holder is designed for DCMT 0702 indexable inserts, offering correct geometry and stable seating for the intended insert form. Does the holder provide coolant directly to the cutting zone? Yes — the SDJCR 1616 clamp holder features internal coolant to support chip evacuation and thermal control at the insert cutting edge. Is this a right-hand or left-hand toolholder? This model is configured for right-hand cutting and has a 93° cutting angle suitable for standard right-hand turning operations. What fastening hardware is required to secure the insert? The insert is secured with a M2.5×5.5 Torx screw; a T8 Torx key is used for tightening and removal, simplifying insert changes. For which applications is this holder most suitable? The clamp holder (Teknik Makina, SKU AP561TM) is ideal for general turning in production and workshop environments where robust clamping, internal coolant, and compact overall length are beneficial. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 1616 H11-F-IC for DCMT 11T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, ISO‑rated clamping solution that combines precise insert seating and internal coolant for improved chip control; its 16×16 mm cross section and 100 mm length deliver consistent rigidity in short overhang setups. Order through Metav Werkzeuge or consult our specialists for integration advice and fast supply from Emmerich. Klemmhalter — SDJC toolholder for DCMT 11T3 inserts, internal coolant, right‑hand (Teknik Cutting Tools) The Klemmhalter is a right‑hand SDJC toolholder designed for turning with DCMT 11T3 indexable inserts; suited to workshop and light industrial lathes where secure clamping and coolant delivery improve cycle stability. SDJCR 1616 profile, 16×16 mm Compatible with DCMT 11T3 inserts Internal coolant supply for chip control Right‑hand holder with 100 mm overall length Precision seating and reproducible cutting performance The SDJC design provides a clear datum for insert location and repeatable clamping, which reduces setup time and minimises positional deviation during batch work. The holder accepts DCMT 11T3 indexable inserts and secures them with a M3.5x8.5 Torx clamping screw using a T15 key, ensuring a firm and serviceable connection. These characteristics translate into stable tool life and consistent workpiece geometry when exchanging inserts or performing rapid tool changes. Improved process reliability through internal coolant Built‑in internal coolant channels deliver cutting fluid directly to the cutting edge, supporting effective chip evacuation and thermal control in interrupted or continuous cuts. The focused coolant flow helps preserve edge integrity on the insert and reduces built‑up edge formation, which in turn maintains surface finish and prolongs insert life. For operations where coolant‑assisted cutting is required, the integrated supply contributes to fewer reworks and higher first‑pass yield. Compact geometry for rigid turning and short overhangs With a cross section of 16×16 mm and a cutting height of 32 mm, the holder offers a compact footprint and predictable stiffness for near‑centreline applications. The specified cutting angle 93° and right‑hand orientation support conventional turning directions while the 100 mm overall length limits overhang to improve vibration resistance. The unit’s modest mass (approx. 0.17 kg) facilitates rapid toolchanging without compromising stability on smaller toolposts. Simple integration and low‑effort maintenance Designed to common mounting practices, the holder is identified as SDJCR 1616, compatible with standard boring bar designations such as H11‑F‑IC, and requires only a T15 Torx key for clamping or maintenance. The accessible screw and predictable seating make insert indexing and routine checks straightforward, which reduces downtime between shifts. This combination of standard interfaces and robust construction supports efficient workshop workflows and predictable shopfloor uptime. For tailored procurement of Teknik Cutting Tools' SDJC clamping holders (AP572TM) and to discuss fitment with existing toolposts, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert advice and supply options Technical Data Article number: AP572TM ISO designation: SDJCR 1616 Product designation: SDJC for DCMT indexable inserts Manufacturer: Teknik Makina Facts Width: 16 mm Height: 16 mm Cutting head width: 16 mm Cutting height: 32 mm Overall length: 100 mm Overall height: 16 mm Weight: 0.17 kg Cutting angle: 93° Cutting direction: Right Special features Compatible with DCMT 11T3 inserts Internal coolant supply SDJC clamping geometry Torx clamping screw M3.5x8.5 Torx key size T15 Compatible with H11‑F‑IC boring bars Right‑hand orientation FAQ What insert type fits this holder? The holder is designed for DCMT 11T3 indexable inserts and locates them on the SDJC seat for secure clamping and repeatable positioning. Does the toolholder provide coolant to the insert? Yes, the toolholder features internal coolant channels to deliver cutting fluid directly toward the cutting edge, improving chip evacuation and tool life. What are the key mounting dimensions to check before ordering? Verify the 16×16 mm cross section and 100 mm overall length to ensure compatibility with the toolpost and necessary overhang for the intended operation. Which clamping hardware is used for insert retention? Insert retention uses a M3.5x8.5 Torx screw tightened with a T15 key for quick service and reliable clamping. Is this holder right‑hand or left‑hand? This version is right‑hand, with a cutting angle of 93°, optimised for conventional right‑hand turning directions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 2020 K07 for DCMT 0702 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of robust, precision clamping and a compact form factor for consistent turning performance; the durable right‑hand holder secures DCMT 0702 inserts and speeds changeovers — order directly via Metav Werkzeuge or ask the consultants for tailored advice. SDJCR 2020 clamp holder (SDJC for DCMT indexable inserts) – right‑hand, compact length – Teknik Makina The SDJCR 2020 clamp holder is a right‑hand turning toolholder engineered for secure mounting of DCMT 0702 indexable inserts, ideal for general external turning and finishing operations on conventional lathes. Secure clamping for DCMT 0702 inserts Right‑hand turning orientation Fits K07 boring bar shanks Torx M2.5x5.5 screw, T8 key Precision clamping that reduces vibration and repeat setups A correctly matched holder translates insert seating into predictable results; the SDJCR 2020 clamp holder delivers secure clamping with a dedicated Torx screw fastening to maintain insert position under load. The design stabilises the insert edge and helps to limit chatter, which in turn improves surface finish and dimensional repeatability. For those assessing set‑up times, the compact arrangement and standardised screw interface make insert changes straightforward while preserving alignment. Compact design for efficient changeover and stable cutting With an overall length of 125 mm and a cutting head width of 25 mm, the holder balances reach with rigidity to suit routine lathe tasks where accessibility matters. The component’s right‑hand orientation and a 93° cutting angle position the insert for typical external turning trajectories, delivering effective chip flow and predictable engagement. Compatibility with a K07 shank designation facilitates integration into existing tool posts and reduces inventory complexity for workshops that standardise on K‑series bars. Practical build and maintenance for workshop reliability Constructed to common dimensional standards — 20 mm body width and 20 mm height — the toolholder offers a familiar footprint for technicians and toolroom managers. The ISO designation SDJCR 2020 signals form and seating geometry that match common turning tool conventions, aiding interchangeability across spare parts. Routine maintenance is limited to inspection of the Torx screw (M2.5x5.5) and cleaning of the clamp seat; this minimal upkeep supports long service intervals and reliable clamp force under cyclic loads. For specifications, stock availability or to secure this Teknik Makina SDJCR 2020 clamp holder through Metav Werkzeuge, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for direct supply and expert guidance Technical data SKU: D221-1TM Manufacturer: Teknik Makina ISO designation: SDJCR 2020 Compatible inserts: DCMT 0702 Cutting direction: right Cutting angle: 93° Facts Width: 20 mm Height: 20 mm Cutting head width: 25 mm Overall length: 125 mm Insert height / cutting height: 20 mm Weight: 0.4 kg Torx screw: M2.5x5.5 Torx key size: T8 Special features For DCMT 0702 indexable inserts K07 boring bar designation Right‑hand turning holder ISO form: SDJCR 2020 FAQ Which insert size is compatible with this holder? The holder is designed for DCMT 0702 indexable inserts and seats them according to the matching ISO groove and clamping geometry. Is the holder suitable for left‑hand turning? This specific toolholder is produced for right‑hand cutting orientation and is intended for standard right‑hand external turning tasks. What fastening hardware is supplied or required? Clamping is secured with a Torx M2.5x5.5 screw; the corresponding Torx key size is T8 for tightening and removal operations. Can it be mounted on common boring bars? The item fits a K07 shank designation, enabling mounting on compatible boring bar systems that accept that format. How does the ISO designation help with replacements? The SDJCR 2020 designation indicates seating form and dimensions that are standardised, simplifying replacement ordering and ensuring interchangeability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 2020 K07-IC For DCMT 0702 Innenkühlung Rechtsschneidend - Teknik Makina
Secure precise, efficient turning with a right-hand holder offering internal coolant and ISO SDJCR 2020 compatibility for DCMT 0702 inserts — a compact solution that combines rigidity, quick indexable-insert changes and reliable chip control; order the AP562TM directly via Metav Werkzeuge or consult our specialists for application advice. SDJC for DCMT Indexable Inserts (AP562TM) — Right-hand turning holder with internal coolant by Teknik Makina The SDJC for DCMT Indexable Inserts is a right-hand turning toolholder engineered for DCMT 0702 inserts, combining a compact profile and cooled cutting-zone supply for stable, repeatable performance in production turning. Internal coolant channel Compatible with DCMT 0702 inserts Right-hand turning orientation ISO SDJCR 2020 designation Consistent clamping for reduced vibration and better finishes The holder delivers a secure clamping interface through its SDJCR 2020 flangetype combined with a substantial contact face, resulting in reduced chatter and a more consistent surface finish. With a shank width of 20 mm and shank height of 20 mm, the rigid profile resists deflection under load and ensures repeatable tool position. The M2.5x5.5 Torx screw and supplied T8 key provide predictable fastening and straightforward insert seating. These mechanical details translate into fewer rejects and less rework when turning structural or finished components. Controlled cooling to extend insert life and stabilise processes Designed with internal coolant, the toolholder directs cutting fluid close to the cutting edge to improve cooling and chip evacuation. That targeted coolant delivery helps to prolong insert life and stabilise cutting temperatures, which is particularly beneficial during long-running cycles or when machining tougher materials. Compatibility with DCMT 0702 indexable inserts keeps tooling costs predictable while enabling fast index changes — a pragmatic balance between performance and economy for batch and series production. Compact geometry that fits tight toolpaths and maintains accessibility A 125 mm overall length and a 25 mm cutting head width combine to give the holder a compact footprint while preserving sufficient overhang for common turning tasks. The toolholder is configured for right-hand cutting and a cutting angle of 93°, making it suitable for external turning, profiling and light turning operations where tool access and rigidity are decisive. The cutting height of 27 mm aligns the insert with standard lathe toolposts, reducing the need for additional shims and set-up time. Simple servicing and proven compatibility for production use Maintenance and insert changes are kept efficient: the Torx clamping screw system allows quick replacement of DCMT inserts and secure locking during heavy cuts. The toolholder is marked with the ISO designation SDJCR 2020 and pairs with bore-bar reference K07-IC, simplifying procurement and tooling standardisation across a workshop. For application-specific recommendations or to confirm suitability for particular materials or cycle parameters, Metav Werkzeuge’s technical team is available to supply detailed data and machining recommendations. Contact Metav Werkzeuge for tailored machining advice or to arrange supply of the Teknik Makina SDJC holder AP562TM — expert guidance from Emmerich and prompt specification support by email or phone Technical data Article number: AP562TM Manufacturer: Teknik Makina Model: SDJC for DCMT Indexable Inserts Dimensions & weights Shank width: 20 mm Shank height: 20 mm Cutting head width: 25 mm Cutting height: 27 mm Overall length: 125 mm Overall height: 20 mm Weight: 0.4 kg Cutting angle: 93° Features & compatibility Internal coolant: yes Compatible inserts: DCMT 0702 Torx screw: M2.5x5.5 Torx key: T8 Toolholder designation: SDJCR 2020 Bore-bar reference: K07-IC FAQ Which indexable inserts fit this holder? The SDJC for DCMT Indexable Inserts (Teknik Makina SDJCR 2020, AP562TM) is specified for DCMT 0702 inserts; insert geometry designed to ISO DCMT fits reliably in the seat. Is there coolant supply through the holder? Yes — the holder is supplied with internal coolant to direct fluid toward the cutting edge for improved chip control and enhanced tool life. What is the cutting orientation of the holder? This toolholder is configured for right-hand turning operations and presents a 93° cutting angle suited for common external turning tasks. What fastening parts are used for the insert? Insert clamping is achieved with a M2.5x5.5 Torx screw, tightened using a T8 key for secure, repeatable fastening. Is the holder suitable for compact lathes or constrained toolposts? With a 125 mm overall length and compact head, the holder is intended for installations where a short overhang and good accessibility are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SDJCR 2020 K11 for DCMT 11T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a precision toolholder that combines compatibility with DCMT inserts, reliable right-hand turning geometry and a compact form factor for stable machining. Order directly via Metav Werkzeuge or consult our specialists for a tailored supply solution. Clamping holder SDJC for DCMT Indexable Inserts — Right-hand, SDJCR 2020 The clamping holder SDJC for DCMT indexable inserts is a right-hand toolholder engineered for turning operations with DCMT 11T3 inserts, delivering stable cutting geometry and simple insert clamping for workshop and production use. Right-hand cutting orientation For DCMT 11T3 indexable inserts Overall length 125 mm for stability Robust 20 mm holder width Stable clamping for repeatable turning results The SDJCR 2020-style toolholder is designed to secure DCMT 11T3 indexable inserts with a consistent clamp force and minimal play. Thanks to its overall length of 125 mm and compact cross-section, the holder provides a steady tool projection that reduces vibration and improves surface finish in turning operations. The cutting angle of 93° helps to position the insert for conventional turning passes while maintaining favourable chip flow; this geometry is particularly useful where predictable toolpath behaviour is required. Clear mechanical interfaces and a standard ISO designation facilitate integration into existing tool setups. Precision dimensions that support process reliability Key dimensions are tuned for workshop interchangeability: a holder height of 20 mm, head width 25 mm and holder width 20 mm combine to create a slim yet rigid toolbody. The cutting height of 25 mm ensures the insert seat aligns correctly with common lathe tool heights, reducing setup time and the need for shims. With a measured mass of 0.404 kg, the holder balances inertia and responsiveness, which helps to maintain concentricity across a range of spindle speeds. These measurable properties translate into predictable tool behaviour and make the holder suitable for both single-part turning and small-series production. Compatibility and easy fitting for efficient shop workflows Intended specifically for DCMT 11T3 inserts, the clamping design supports fast insert changes and secure positioning for repeatable cycles. The toolholder is configured for right-hand cutting direction and is compatible with bar-stock mounting schemes referenced by the K11 bore-bar designation, enabling straightforward retrofitting to common tool posts and boring bars. The SDJC clamping principle gives a firm grip on the insert corner, reducing the risk of insert movement under load and simplifying maintenance routines by standardising spare-part inventories. Robust design that reduces downtime and simplifies logistics Constructed to industry norms and identified by the ISO code SDJCR 2020, this toolholder lets purchasing and engineering teams standardise on a recognised tool format. The combination of well-documented dimensions and a compact footprint assists in planning toolpaths, fixture clearances and stocking. Reduced setup variability and standard compatibility lower the frequency of corrective adjustments, which supports higher machine uptime and a more predictable production flow. For procurement or technical clarification, contact Metav Werkzeuge for product availability, compatibility advice and ordering: Metav Werkzeuge will advise on delivery options and precise fitting details Technical data SKU: D226TM Type: SDJC for DCMT indexable inserts ISO designation: SDJCR 2020 Manufacturer: Teknik Makina Dimensions & core data Overall length: 125 mm Cutting height: 25 mm Holder height: 20 mm Head width: 25 mm Holder width: 20 mm Weight: 0.404 kg Cutting angle: 93° Compatibility & features For DCMT 11T3 inserts Right-hand cutting direction Bore-bar designation: K11 Clamping type: SDJC FAQ Is this holder suitable for DCMT 11T3 inserts? Yes. The clamping holder SDJC for DCMT indexable inserts is specified for use with DCMT 11T3 inserts and secures the insert corner for turning tasks. What is the cutting direction of the holder? The toolholder is configured for right-hand cutting operations, matching the SDJCR 2020 ISO orientation. Which dimensions determine installation height and stability? Key dimensions are cutting height 25 mm, holder height 20 mm and overall length 125 mm, which together influence tool projection and stability during turning. Can the holder be mounted on standard bar systems? Yes. The product references bore-bar designation K11, facilitating mounting on compatible bar and toolpost systems used in workshop settings. What is the ISO code for identification and ordering? The holder is identified as SDJCR 2020, which can be used for unambiguous ordering and stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 93° SVJBL 1010 J11-F-IK für VBMT 1103 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Compact left-hand clamp holder with internal coolant and slim 10 mm profile for precise turning — combines rigidity, reliable insert seating and efficient chip control; order the AP557TM directly via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter AP557TM — SVJB for VBMT indexable inserts with internal coolant Klemmhalter AP557TM is a flat clamping holder engineered for left-hand turning with VBMT 1103 indexable inserts, offering integrated coolant supply and a compact profile for tight setups Internal coolant for improved chip evacuation Compatible with VBMT 1103 inserts Compact 10 mm height and width Left-hand cutting, ISO SVJBL 1010 Precision and rigidity for consistent turning results The AP557TM clamp holder is built to deliver repeatable performance in turning operations. Its ISO SVJBL 1010 designation signals a standardised fit and seat for VBMT-format inserts, ensuring secure clamping and minimal micro‑movement during cutting. The holder’s slim 10 mm cross-section and a total length of 110 mm reduce overhang, which in turn lowers vibration and improves dimensional accuracy. For workshops targeting consistent surface finish and predictable tool life, the combination of a rigid body and correct insert seating supports stable cutting conditions and reduced scrap rates. Optimised coolant flow and practical assembly features Integrated internal coolant channels channel cutting fluid directly to the cutting edge, improving chip control and helping maintain lower cutting temperatures. This is particularly beneficial when machining steels and alloyed materials where thermal management extends insert life and reduces built-up edge. Assembly and insert replacement are straightforward: the clamping screw is specified as M2.5 x 6.5 and requires a T8 Torx key, a common size that enables fast, precise torque application and repeatable clamping force without specialised tools. The flat design simplifies setup in multi‑tool turrets and small lathes where space is limited. Compact dimensions for flexible mounting and application fit With a cutting head width of 10 mm, cutting height of 30 mm and a cutting angle of 93°, this holder suits a range of turning tasks that require a left‑hand orientation. The low overall height of 10 mm allows users to fit the holder into constrained tool pockets while maintaining sufficient clearance for coolant fittings and insert change. Weighing just 0.07 kg, the holder contributes little additional mass to the turret assembly, aiding quicker tool changes and lower dynamic imbalance. Produced by Teknik Makina and listed under SKU AP557TM, the component is a pragmatic choice where compactness, coolant delivery and repeatable clamping are priorities. For a detailed suitability check or application recommendation for the AP557TM from Teknik Makina, contact Metav Werkzeuge for direct technical consultation — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: AP557TM Manufacturer: Teknik Makina ISO designation: SVJBL 1010 Numbers Width: 10 mm Height: 10 mm Cutting head width: 10 mm Cutting edge height: 30 mm Overall length: 110 mm Overall height: 10 mm Weight: 0.07 kg Cutting angle: 93° Screw: M2.5 x 6.5 Torx key: T8 Special features For VBMT 1103 inserts Internal coolant Left-hand cutting direction Flat design (flache Ausführung) Mounting shank designation J11-F-IK FAQ Is the holder compatible with standard VBMT 1103 inserts? Yes. The AP557TM is designed specifically for VBMT 1103 indexable inserts and seats them to the ISO SVJBL 1010 specification for secure clamping. Does the clamping holder supply coolant to the insert tip? Yes. The AP557TM features internal coolant channels that deliver cutting fluid toward the cutting edge to aid chip evacuation and temperature control. Which screw and key are needed for insert clamping? Clamping is secured with an M2.5 x 6.5 Torx screw; the corresponding key size is T8 for the AP557TM. Can the holder be used for right-hand turning? No. The AP557TM is manufactured for left-hand cutting; for opposite direction turning a right-hand variant would be required. What advantages does the flat design offer in small turrets? The flat profile and compact 10 mm cross-section of the AP557TM allow installation in tight tool pockets and help reduce overhang, improving stability and finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBL 1212 J11-IK for VBMT 1103 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a compact, performance‑oriented turning solution with precise clamping, internal coolant and standardised mounting dimensions; the combination reduces set‑up time and improves tool life. Order the clamping holder directly via Metav Werkzeuge or consult our technical team for application advice. SVJBL 1212 Clamping Holder – SVJB for VBMT Indexable Inserts, left‑hand A SVJBL 1212 clamping holder designed for left‑hand turning with internal coolant, optimised for VBMT 1103 indexable inserts and medium‑duty lathe applications. Left‑hand orientation for turning Internal coolant feed for reliable chip control Compatible with VBMT 1103 indexable inserts ISO SVJBL 1212 design, 110 mm overall length Precision and productivity for turning operations The clamping system is engineered to deliver repeatable performance under production conditions. The integrated internal coolant directs cutting fluid close to the cutting edge, improving chip control and heat management, which in turn extends insert life and stabilises process windows. With a nominal cutting angle of 93°, the geometry supports secure contact between insert and workpiece, reducing vibration and promoting consistent surface finish. Compatibility with VBMT 1103 inserts makes the holder a flexible choice for common turning tasks in steel and stainless‑steel workshops. Fast set‑up and secure mounting to keep machines running Built to ISO dimensions, the holder accepts standard fastenings and is set up with familiar toolroom hardware: the clamping screw is M2.5x6.5 and the required Torx key size is T8, enabling quick changeover on the shop floor. The modest mass and balanced proportions—overall 110 mm length and a weight of 0.141 kg—help maintain static balance on the turret and reduce inertial forces during index changes. The tool shank designation J11‑IK fits common boring bars, allowing straightforward integration into existing toolbanks and minimising downtime during tool swaps. Application fit, robustness and workshop benefits Designed for indexable insert turning, the holder is suitable where compact reach and reliable coolant delivery are required. The defined 32 mm cutting height and compact head width (16 mm) maintain stiffness at the cutting point while permitting access in confined setups. Left‑hand orientation supports machining strategies where opposite cutting directions are specified. The SVJBL 1212 format ensures interchangeability with other ISO‑matched holders, simplifying inventory and supporting predictable replacement cycles — an advantage for maintenance planning and lean tooling management. Contact Metav Werkzeuge for tailored advice on using the Teknik Cutting Tools SVJBL 1212 clamping holder and to arrange prompt supply from Emmerich. Technical data Article number: AP551TM Designation: SVJB for VBMT Indexable Inserts Manufacturer: Teknik Makina Numbers / Core technical data Overall length: 110 mm Cutting height: 32 mm Holder height: 12 mm Holder width: 12 mm Cutting head width: 16 mm Cutting angle: 93° Weight: 0.141 kg Special features / Compatibility Internal coolant For VBMT 1103 indexable inserts Left‑hand orientation Screw: M2.5x6.5 Torx key: T8 Shank designation: J11‑IK ISO designation: SVJBL 1212 FAQ Is this holder suitable for VBMT 1103 inserts? Yes. The holder is designed specifically for VBMT 1103 indexable inserts and provides correct seating and clamping for that insert form. Can the holder be used for right‑hand turning operations? This model is manufactured for left‑hand turning; for right‑hand operations a corresponding right‑hand holder should be selected. Does the clamping holder provide coolant through the tool? Yes. The tool features internal coolant, feeding fluid close to the cutting edge for improved chip control and thermal management. What are the fastening specifications for set‑up? Clamping is effected with an M2.5x6.5 screw tightened using a T8 Torx key, matching common workshop toolsets. Which shank / boring bar designation fits this holder? The holder accepts the shank designation J11‑IK, enabling compatibility with standard adaptor systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBL 1616 H11-F for VBMT 1103 Indexable Inserts Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a compact, left‑hand SVJB clamping holder that secures VBMT 1103 indexable inserts for stable turning; the combination of a 16 mm cutting head width and 100 mm overall length supports predictable chip control and efficient tool change. Order via Metav Werkzeuge or request advisory support from the consultants at Metav Werkzeuge for application-specific configuration. SVJB for VBMT Indexable Inserts – left‑hand SVJB clamping holder by Teknik Makina, 100 mm overall length A SVJB clamping holder engineered for left‑hand turning operations with compatibility for VBMT 1103 indexable inserts, offering compact dimensions for tight setups and reliable insertion seating Left‑hand cutting orientation Compatible with VBMT 1103 inserts 16 mm cutting head width 100 mm overall length Stable clamping for consistent turning results The compact holder delivers precision clamping that reduces chatter and maintains insert position during interrupted cuts. With a 16 mm cutting head width and a cutting edge height of 25 mm, the design focuses on repeatability and surface integrity rather than unnecessary bulk. This stabilising effect supports longer insert life and fewer rework cycles, which translates into measurable production gains and lower piece costs per part. Geometry optimised for shop efficiency An included 93° cutting angle and a 100 mm overall length create a balance between reach and rigidity that is advantageous in constrained toolposts and tool towers. The left‑hand configuration simplifies tool planning for dedicated turning operations, helping maintain consistent cutting direction across a batch. At only 0.204 kg, the holder minimises tool overhang inertia while remaining robust enough for standard turning feeds, promoting steady cycle times and predictable tool behaviour. Designed for simple integration and economical use Compatibility with VBMT 1103 indexable inserts and the ISO designation SVJBL 1616 streamlines inventory and simplifies insert rotation strategies; indexable inserts enable rapid seat changes without resetting tool geometry. The holder’s shank reference H11‑F supports straightforward mounting in compatible toolholders, while the compact form factor favours machines with limited clearance. For workshops seeking reliable, repeatable turning performance, this solution reduces setup time and supports consistent part quality. Acquire the Teknik Makina SVJB clamping holder through Metav Werkzeuge for assured compatibility and production reliability; contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: D397TM ISO designation: SVJBL 1616 Product name (EN): SVJB for VBMT Indexable Inserts Manufacturer: Teknik Makina Facts Cutting head width: 16 mm Holder width: 16 mm Holder height: 16 mm Cutting edge height: 25 mm Overall length: 100 mm Cutting angle: 93° Cutting direction: left Weight: 0.204 kg Special features For indexable inserts: VBMT 1103 Shank reference: H11‑F Design: SVJB clamping style FAQ What insert type does this holder accept? The holder is designed for VBMT 1103 indexable inserts and is supplied as the SVJB style clamping holder (Teknik Makina, SKU D397TM) for straightforward insert seating. Is the holder suitable for right‑hand turning? This SVJB variant is configured for left‑hand turning; choose a right‑hand version if right‑hand cutting direction is required. What are the key dimensions to check for machine compatibility? Verify the overall length (100 mm), the 16 mm cutting head width and the SVJBL 1616 ISO sizing to ensure correct clearance and mounting in the toolpost. How does the SVJB design benefit insert changes? The SVJB clamping concept secures VBMT 1103 inserts for rapid index and replacement actions, reducing machine downtime and maintaining tool geometry between changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBL 1616 H16 for VBMT 1604 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Benefit from a precise left‑hand clamping holder that pairs a secure fit for VBMT 1604 indexable inserts with a compact 100 mm overall length for reduced overhang and consistent turning performance; order the clamping holder via Metav Werkzeuge or consult our specialists for tailored application advice. Klemmhalter SVJBL 1616 — Clamping holder for VBMT 1604, left‑hand, 100 mm (Teknik Makina) Klemmhalter SVJBL 1616 is a left‑hand clamping holder designed for turning operations with VBMT 1604 indexable inserts, offering a compact footprint for confined setups. Left‑hand clamping holder for turning For VBMT 1604 indexable inserts 100 mm overall length for compact setups 33 mm cutting height for deep turns Precise insert seating for repeatable turning results The design focuses on compatibility and repeatability: the holder accepts VBMT 1604 indexable inserts and carries the ISO designation SVJBL 1616, enabling straightforward replacement and consistent cutting geometry. The left‑hand orientation and a 93° cutting angle stabilise chip flow and support predictable tool path behaviour. With a secure clamping interface and an ISO‑based form factor, the toolholder reduces downtime during insert changes and maintains concentricity across sequential parts — an advantage in batch production and setup‑sensitive tasks where consistency matters. Compact form that increases rigidity and reduces vibration A short overall length of 100 mm and a modest mass of 0.192 kg limit overhang and improve stiffness at the cutting zone. The holder’s working dimensions — holder height 16 mm, holder width 16 mm and cutting head width 20 mm — result in a concentrated load path that diminishes chatter and supports cleaner surface finishes. The 33 mm cutting height sets the insert at a stable centre of rotation, which helps to preserve insert life and reduces the need for rework. In practice, this compact configuration suits installations with limited cross‑slide travel and helps to maintain cycle times on small‑ to medium‑sized lathes. Practical advantages and suitable applications for workshops and production Built by Teknik Makina to interface with standard boring bars (designation H16) and indexable inserts, the holder is intended for routine external turning where a left‑hand tool is required. The straightforward geometry simplifies programming and fixturing on CNC lathes and supports quick tool changes in mixed production environments. For toolrooms and industrial workshops seeking a dependable, ISO‑compatible clamping solution, the unit delivers predictable seating and mechanical stability — qualities that translate into fewer rejects and more reliable throughput. The construction and form factor favour applications where space is limited but rigidity and repeatability remain priorities. For application advice or to secure a supply of the Teknik Makina clamping holder through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks. Technical data Article number: D374TM Manufacturer: Teknik Makina SKU: D374TM Designation (ISO): SVJBL 1616 Suitable for inserts: VBMT 1604 Direction: left Facts Overall length: 100 mm Weight: 0.192 kg Cutting height: 33 mm Cutting head width: 20 mm Holder width: 16 mm Holder height: 16 mm Cutting angle: 93° Special features Boring bar designation: H16 Left‑hand orientation ISO compatibility: SVJBL 1616 For VBMT 1604 indexable inserts Brand: Teknik Makina FAQ Which inserts fit this clamping holder? The clamping holder accepts VBMT 1604 indexable inserts and is specified as SVJBL 1616, ensuring a precise fit for that insert form. Is the holder left‑hand or right‑hand? This toolholder is left‑hand oriented; the specification lists left direction and a 93° cutting angle for turning operations. What are the key dimensions to consider for setup? Key dimensions include an overall length of 100 mm, cutting height 33 mm, holder height 16 mm and holder width 16 mm, which together influence overhang and rigidity. Which boring bar designation is compatible with the holder? The holder is designed for a boring bar designated H16, enabling direct mounting in compatible tool posts and bar systems. What is the SKU for ordering and identification? The SKU for ordering is D374TM, listed under the Teknik Makina clamping holder SVJBL 1616 Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBL 2525 M16-IK for VBMT 1604 Indexable Inserts Innenkühlung linksschneidend - Teknik Makina
Take advantage of a robust turning solution that combines precise clamping, through‑coolant capability and a compact 25 x 25 mm shank for reliable chip control and repeatable setup; order directly via Metav Werkzeuge or contact the consultants for tailored advice. SVJBL 2525 Clamping Toolholder – Left‑hand, internal coolant (Teknik Makina) The SVJBL 2525 clamping toolholder is a left‑hand turning holder for VBMT 1604 indexable inserts, engineered for secure clamping and efficient through‑coolant machining in conventional CNC turning applications SVJBL 2525 design for VBMT 1604 inserts Left‑hand orientation for opposite cuts Integrated internal coolant for chip evacuation 25 x 25 mm shank, 150 mm overall length Stable clamping for consistent turning quality The holder is built with a square 25 x 25 mm shank and an ISO designation of SVJBL 2525, providing a compact, rigid connection between toolpost and cutting edge. This geometry reduces vibration and contributes to consistent surface finish and dimensional repeatability. For operations that demand predictable tool behaviour, the combination of a short effective overhang and a solid clamping interface translates into reduced rework and fewer interrupted production cycles, particularly when paired with VBMT 1604 inserts. Improved cooling and chip management for longer insert life Internal coolant channels deliver cutting fluid directly to the cutting zone, supporting chip evacuation and thermal control at the insert edge. The through‑coolant capability helps maintain cutting edge integrity and can extend insert life by reducing built‑up edge formation. With a cutting angle of 93° and a cutting height of 40 mm, the holder promotes stable cutting conditions; this reduces the risk of premature tool wear and supports higher feed rates where process windows allow. Secure fastening and easy maintenance Assembly and service are straightforward: the toolholder uses a TA034 clamp plate together with an M3.5x11 Torx screw (Torx T15) for positive insert retention, while the back‑end mounting is compatible with the M16‑IK toolpost interface. These standardised fastenings simplify replacement and maintenance routines on the shop floor, minimising downtime. The holder’s mass (approx. 0.683 kg) and its overall length of 150 mm are balanced to facilitate quick tool changes without compromising rigidity. Application scope and machining advantages Designed primarily for turning operations that employ VBMT indexable inserts, the holder’s left‑hand orientation is suited for facing and external turning where opposite cutting direction is required. The compact head width of 32 mm and shank profile make it an appropriate choice for both general workshop turning and production environments where space and tool clearance are factors. Compatibility with standard insert geometry and through‑coolant lines ensures a versatile fit into existing CNC turning cells. Contact Metav Werkzeuge for a specification review of the SVJBL 2525 clamping toolholder with internal coolant and to confirm suitability for the machine and insert grade in use; our Emmerich team provides practical, experienced guidance Technical Details Article number: AP556TM Manufacturer: Teknik Makina ISO designation: SVJBL 2525 Suitable for inserts: VBMT 1604 Mounting shank: M16‑IK Torx screw: M3,5x11 Torx key size: T15 U‑plate: TA034 Through‑coolant: internal Cutting direction: left Dimensions & Weights Overall length: 150 mm Shank width: 25 mm Shank height: 25 mm Head (cutting) width: 32 mm Cutting height: 40 mm Cutting angle: 93° Weight: 0.683 kg Components & Special features Clamp plate: TA034 Fastening: Torx M3.5x11 (T15) Mounting interface: M16‑IK Orientation: left‑hand holder Compatible inserts: VBMT 1604 FAQ Which insert format fits this holder? The holder is designed for VBMT 1604 indexable inserts and secures them with the TA034 clamp plate and M3.5x11 Torx screw. Is the toolholder suitable for through‑coolant applications? Yes, the SVJBL 2525 toolholder features internal coolant channels to deliver fluid to the cutting zone. What are the shank dimensions and overall length? Shank size is 25 x 25 mm and the overall length is 150 mm, giving a compact, rigid mounting profile. Can it be mounted on standard toolposts? Mounting uses an M16‑IK interface; compatibility with the toolpost should be verified against this specification. What is the cutting direction and typical use case? The holder is left‑hand oriented, suitable for facing and external turning where opposite cutting direction is required; product SKU AP556TM from Teknik Makina is aimed at general turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBR 1010 J11 for VBMT 1103 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Compact clamping combines precise insert seating, a short 110 mm shank and a 12 mm cutter head for steady turning results — order the part directly via Metav Werkzeuge or consult our technical advisors for application advice. Klemmhalter SVJB for VBMT Indexable Inserts — SVJBR 1010, 110 mm overall length The Klemmhalter SVJB for VBMT Indexable Inserts is a right-hand clamping holder designed to secure VBMT 1103 turning inserts, offering compact geometry for reduced overhang and consistent cutting performance. SVJBR 1010 ISO designation Compatible with VBMT 1103 inserts Right-hand cutting direction 110 mm overall length, 12 mm cutter head Precision clamping for reliable turning cycles The holder provides secure insert location and repeatable seating that reduces variation in part finish and tool life. With an ISO designation of SVJBR 1010, the component is specified for use with VBMT 1103 indexable inserts, ensuring correct fit and orientation. The cutting-edge height of 21 mm is matched to standard insert geometry, which helps maintain the designed tool centre height and avoids unexpected set-up corrections. This predictability supports stable cycle times and fewer scrap parts in production settings. Compact form that improves rigidity and surface quality A short overall length of 110 mm combined with a 12 mm cutter head and holder cross-section of 10 x 10 mm reduces overhang and increases stiffness at the cutting zone. The reduced cantilever limits vibration and enables higher feed rates or improved surface finish without changing insert grade. At a weight of only 0.097 kg, the toolholder is light enough for quick handling yet dimensioned to give the necessary mass for dampening, making it suitable for both small-batch work and repetitive industrial turning tasks. Compatibility and clear machining direction Engineered for turning with a right-hand cutting direction, the toolholder accepts VBMT 1103 indexable inserts and references the shank designation J11 for system integration. The nominal cutting angle of 93° aligns with common turning strategies where a slight lead provides clearance while preserving strength at the cutting edge. For systems requiring standardised interfaces, the ISO SVJBR 1010 designation simplifies tool selection and inventory management across workshop toolholders and insert stocks. Practical handling and workshop integration The holder’s straightforward geometry enables rapid mounting and repeatable set-up in turret stations or quick-change systems. The compact head width and low profile are advantageous where tool-to-tool spacing is tight or when access to small-diameter workpieces is required. Maintenance is kept simple by the design: periodic inspection of the seat and clamping surfaces is sufficient to maintain accuracy, while the robust construction supports sustained use in demanding turning operations. The result is a dependable toolholder that fits into an efficient, low-complexity tooling strategy. For robust turning performance with Teknik Makina components, request the SVJB clamping holder from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: D230TM Manufacturer: Teknik Makina Description: SVJB for VBMT Indexable Inserts ISO designation: SVJBR 1010 Facts Overall length: 110 mm Cutter head width: 12 mm Holder width: 10 mm Holder height: 10 mm Cutting-edge height: 21 mm Cutting angle: 93° Weight: 0.097 kg Special features For VBMT 1103 indexable inserts Right-hand cutting direction Shank designation: J11 Compact design for reduced overhang FAQ What inserts fit this clamping holder? The holder is designed for VBMT 1103 indexable inserts and secures them with the ISO SVJBR 1010 interface to ensure correct seating and repeatability. Is the holder suitable for left-hand turning? This toolholder is specified for a right-hand cutting direction; left-hand operations require a corresponding left-hand toolholder variant. What are the critical dimensions to check when replacing a holder? Key dimensions are the overall length (110 mm), cutter head width (12 mm) and cutting-edge height (21 mm); these determine clearance, rigidity and correct tool centre height. Which shank designation should be ordered to match existing tool posts? The shank designation provided is J11; matching this to the machine’s turret or quick-change system ensures proper fit. How does the compact design affect machining performance? The reduced overhang improves rigidity and reduces vibration, which typically allows for better surface finishes or increased cutting parameters without compromising tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Precision coolant delivery for demanding turning operations
Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.
How they work and where they help most
Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.
Key facts
| characteristic | detail |
|---|---|
| category | tool holders with internal coolant |
| common synonyms | internal coolant toolholders; coolant-through tool holders |
| typical application | turning, heavy machining, internal bore finishing |
| coolant routing | internal channels and boreholes delivering coolant to the insert seat |
| key technical effect | direct cooling at the cutting edge, improved chip evacuation, reduced thermal load |
| comparison | standard holders use external nozzles; internal coolant holders route coolant through the shank |
Measurable benefits for production
- Direct coolant feed reduces the thermal stress on the insert, extending tool life.
- Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
- More consistent cooling helps achieve better surface finish and dimensional stability.
- Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.
Metav: precision supply and industrial competence
Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.
In short
Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.
FAQ
When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.
Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.
What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.
How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com