High-precision clamping holders with internal coolant for extended tool life
Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.
150mm DCLNL 2525 Turning Holder for CN-- 1606, 95° cut left - Teknik Makina
Introducing the Clamping Holder (DCLNL 2525) — Turning Holder by Teknik Makina The Clamping Holder is a durable Turning Holder designed for CN-- 1606 indexable inserts, optimised for precise left-hand turning tasks. Clamping Holder for CN-- 1606 inserts 150 mm overall length for stable reach 95° cutting angle for left-hand turning ISO DCLNL 2525 compatibility 32 mm cutting head width for secure clamping Precision where stability meets productivity A compact tool holder can determine surface quality and cycle time. The Clamping Holder delivers a controlled setup through its 150 mm overall length and rigid geometry, reducing vibration during cuts. By converting technical features into a clear benefit, this design improves repeatability on turned components and supports consistent machining results for short to medium overhangs. Engineered compatibility for straightforward tool setup Matching the Clamping Holder to CN-- 1606 indexable inserts ensures secure seating and correct chip flow. The holder's ISO designation DCLNL 2525 and M16 mounting thread simplify selection and retrofit into existing toolposts, reducing setup time. This compatibility translates into fewer machine interruptions and predictable tool behaviour during left-hand operations. Designed for workshops and production environments Workshops that prioritise predictability benefit from the tool's defined cutting geometry and 95° cutting angle, which aid in achieving targeted profiles and dimensional accuracy. The robust Cutting Head width of 32 mm supports stable clamping, making this holder suitable for metalworking shops that require reliable performance across batch runs and series production. Manufacturer quality and practical advantages Teknik Makina supplies this holder with clear technical specifications so purchasing decisions can be made confidently. The holder's dimensions—25 mm width, 25 mm height and a cutting height of 36 mm—are designed to balance rigidity and accessibility. Choosing a purpose-built holder like this reduces the need for makeshift fixes and contributes to safer, more efficient turning operations. Strong recommendation: Rely on Teknik Makina’s Clamping Holder for dependable left-hand turning—contact METAV Werkzeuge for expert advice and support via info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications Bezeichnung: Clamping Holder Brand: Teknik Makina SKU: D303TM Suitable Inserts: CN-- 1606 Overall Length: 150 mm Weight: 0.432 kg ISO Designation: DCLNL 2525 Shank Designation: M16 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Height: 36 mm Cutting Direction: left Cutting Angle: 95° GTIN: 4061905151446 Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Clamping Holder from Teknik Makina and what does that mean for setup? The Clamping Holder by Teknik Makina accepts CN-- 1606 indexable inserts, which means the Turning Holder uses standard insert geometries for secure clamping and predictable chip control, simplifying tool selection and setup. Is the Clamping Holder suitable for left-hand turning operations? Yes, the Teknik Makina Clamping Holder is specified for left-hand turning; the holder's 95° cutting angle and defined cutting direction ensure correct orientation and cutting behaviour for left-hand applications. What mounting and dimensional data should be checked before ordering the Clamping Holder? Check the Turning Holder's ISO designation DCLNL 2525, the M16 shank interface and the overall length of 150 mm to confirm compatibility with your turret or toolpost, ensuring the holder fits and performs as expected. Can METAV Werkzeuge provide advice if I am unsure this holder meets my needs? If you are uncertain whether the Teknik Makina Clamping Holder suits your application, METAV Werkzeuge offers competent consultation—contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. 150mm DCLNL 2525 Turning Holder for CN-- 1606, 95° Cut Left - Teknik Makina
150mm DCXNN 2525 40° for CN-- 1204 indexable inserts - Teknik Makina
Clamp Holder (Turning Holder) from Teknik Makina The Clamp Holder is a precision turning holder engineered for CN-- 1204 indexable inserts, delivering stable, repeatable machining at a 40° cutting angle. Fits CN-- 1204 indexable inserts 40° cutting angle for precise surface finish 150 mm overall length for enhanced stability ISO DCXNN 2525 designation for standard compatibility Precision and surface quality through stable clamping The Clamp Holder is manufactured to ensure consistent seating of CN-- 1204 indexable inserts, which reduces micro-movements and vibration during cutting. This stability directly improves surface finish and contributes to longer insert life, so single-insert replacements lower operating costs. For machining operations that demand repeatable accuracy, the precise 40° cutting geometry supports fine tolerances while maintaining robustness in steel-working environments. Faster setup and reliable handling for productive workshops Designed with a focus on efficient workflow, the holder features straightforward screw access (M12) and a clamping concept that enables quick tool change and minimal downtime. With a compact profile of 25 x 25 mm and a total length of 150 mm, the tool offers a balance between rigidity and accessibility at the tool post. The ISO designation DCXNN 2525 ensures compatibility with common toolholders, simplifying inventory management and reducing setup complexity on the shop floor. Versatility for professional turning and mixed operations This turning accessory is suitable for a wide range of metalcutting tasks—turning, light milling, drilling and threading—when paired with appropriate insert geometries. The Clamp Holder's design supports different insert geometries and materials, making it a practical choice for job shops and production lines seeking a single-holder solution for diverse workpieces. The robust construction and precise alignment characteristics make it particularly valuable where reproducibility and tool life are priorities. We recommend the Teknik Makina Clamp Holder for workshops that prioritise precision and uptime — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D216TM English designation: Turning Holder / Clamp Holder Manufacturer designation: DCXNN 2525 Secondary designation: M12 Fits indexable inserts: CN-- 1204 Cutting angle: 40° Overall length: 150 mm Width: 25 mm Height: 25 mm Cutting head width: 12.5 mm Weight: 0.756 kg GTIN: 4061905151521 Availability: in Stock Condition: new Label: Klemmhalter DCXNN 2525 40° CN-- 1204 Manufacturer / Manufacturer for English: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person / Responsible Person for English: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts are compatible with the Clamp Holder from Teknik Makina? The Clamp Holder by Teknik Makina is compatible with ISO indexable inserts CN-- 1204; selecting inserts with the correct geometry ensures secure seating and optimal cutting performance. How is an insert changed on the Teknik Makina Clamp Holder? To change an insert on the Teknik Makina Clamp Holder, loosen the clamping screw (M12), remove the worn insert, position the new CN-- 1204 insert in the pocket and retighten; this procedure minimises setup time and keeps machining running smoothly. For which applications is the Teknik Makina Clamp Holder suitable? The Teknik Makina Clamp Holder is intended for turning operations and can be used in a variety of metalcutting tasks, including light milling, drilling and threading when paired with suitable CN-- 1204 insert geometries. Can METAV Werkzeuge provide technical advice for the Clamp Holder? Yes. METAV Werkzeuge offers comprehensive consultation for the Clamp Holder and related tooling—contact info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 for support and ordering assistance. 150mm Clamp Holder DCXNN 2525 40° for CN-- 1204 Indexable Inserts - Teknik Makina
150mm DDHN for DN-- 1506 Indexable Inserts, 107.5° left, DDHNL 2525 - Teknik Makina
Turning Holder — Precision Toolholder for DN-- 1506 Indexable Inserts The Turning Holder secures DN-- 1506 indexable inserts for stable, left-hand turning operations in metalworking lathes. Compatible with DN-- 1506 indexable inserts 150 mm Overall Length for stable support ISO DDHNL 2525 Profile for precise mounting 25 mm Shank Width and Height for rigidity 107.5° Cutting Angle for controlled left cuts Built for rigidity and repeatable precision The Turning Holder features a compact, machined design that prioritises stability and repeatable tool positioning. With a 25 mm shank width and height, the toolholder minimises deflection under load, which directly improves surface finish and dimensional accuracy. The ISO DDHNL 2525 designation indicates a standardised profile for secure clamping and simple interchangeability on compatible toolposts. This makes setup faster and reduces downtime between operations. Optimised for left-hand turning with controlled cutting geometry A defined 107.5° cutting angle and left-hand cutting direction provide predictable chip flow and reduced cutting forces for many facing and turning tasks. The moderately wide 32 mm cutting head and 33 mm cutting height help distribute cutting loads, which benefits insert life and process stability. In practical terms, this means more consistent cycles and fewer unexpected tool changes during longer production runs. Compatibility and straightforward workshop integration Designed for DN-- 1506 indexable inserts, the holder accepts common carbide grades and geometries used in general turning. The 150 mm overall length offers a balance between reach and rigidity, enabling access to workpieces without sacrificing stability. For users less familiar with terminology: indexable inserts are replaceable cutting tips that click into place, allowing rapid replacement without regrinding. This holder simplifies that maintenance step and supports efficient workflows. Made for professional machining and reliable serviceability Intended for workshop environments where consistency matters, this turning toolholder supports repeatable setups and predictable results across batches. The DDHNL 2525 profile and the additional designation M15 assist in selecting matching clamping hardware and toolposts. If equipment selection or application matching is unclear, personalised support is available—METAV Werkzeuge provides competent consultation to ensure the holder fits your machining tasks and machine interface. Choose the robust Turning Holder from Teknik Makina to enhance machining accuracy and process reliability — for tailored advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp: +49 170 2837271) Technical Specifications Designation: Turning Holder Brand: Teknik Makina SKU: D296TM For Indexable Inserts: DN-- 1506 Compatible Inserts: DN-- 1506 Overall Length: 150 mm Weight: 0.753 kg ISO Designation: DDHNL 2525 Secondary Designation: M15 Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Height: 33 mm Cutting Direction: Left Cutting Angle: 107.5° GTIN: 4061905150821 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed for DN-- 1506 indexable inserts; these standard inserts fit the DDHNL 2525 profile and allow quick replacement for continuous production. Can the Teknik Makina Turning Holder be used for heavy-duty turning? The Turning Holder from Teknik Makina offers a 25 mm shank and a sturdy 150 mm length that favour rigidity; for very heavy-duty cuts, consult METAV Werkzeuge to confirm suitability for your specific material and machine. How do I mount the DDHNL 2525 Turning Holder correctly? Mount the Turning Holder to a compatible toolpost that accepts the DDHNL 2525 profile, ensure secure clamping of the holder and the DN-- 1506 insert, and verify alignment before machining; METAV Werkzeuge can provide step-by-step assistance if needed. Who should I contact for technical advice about the Turning Holder? For application support and technical data regarding the Turning Holder by Teknik Makina, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; personalised consultation is available for complex requirements. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D296TM","sku":"D296TM","mpn":"D296TM","gtin13":"4061905150821","name":"Turning Holder DDHNL 2525 107.5° DN-- 1506","description":"150 mm turning holder for DN-- 1506 indexable inserts, ISO DDHNL 2525, left-hand 107.5° cutting angle; robust 25x25 mm body.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/05/8d/e2/62/62e28d05a9cff922f4706cc6/d295tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/da/7e/de/62/62de7eda33927e49dbf32783/d295tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3e/7e/de/62/62de7e3e148ec6b71020ff83/d295tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"DN-- 1506"},{"@type":"PropertyValue","name":"ISO Designation","value":"DDHNL 2525"},{"@type":"PropertyValue","name":"Overall Length","value":"150 mm"},{"@type":"PropertyValue","name":"Body Width","value":"25 mm"},{"@type":"PropertyValue","name":"Body Height","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"left"},{"@type":"PropertyValue","name":"Cutting Angle","value":"107.5°"},{"@type":"PropertyValue","name":"Weight","value":"0.753 kg"},{"@type":"PropertyValue","name":"Shank Designation","value":"M15"}]} ,{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for DN-- 1506 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 150 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 107.5° with left-hand cutting direction."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation DDHNL 2525."}},{"@type":"Question","name":"What are the holder dimensions?","acceptedAnswer":{"@type":"Answer","text":"Body width and height are 25 mm; cutting head width is 32 mm."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]} ,{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-ddhnl-2525-dn-1506","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Indexable Insert Compatibility"},{"@type":"Thing","name":"Workshop Tooling"}],"mentions":[{"@type":"Thing","name":"DN-- 1506 Inserts"},{"@type":"Thing","name":"DDHNL 2525 Shank"},{"@type":"Thing","name":"M15 Shank Designation"}]}]}
150mm DDHNR 2525 Turning Holder for DN-- 1506 Indexable Inserts, 107.5° - Teknik Makina
Turning Holder (Klemmhalter) — Teknik Makina The Turning Holder is a precision clamping tool for DN-- 1506 indexable inserts, engineered for right-hand turning operations and medium-duty lathe work. Clamping holder for DN-- 1506 inserts ISO DDHNR 2525 profile for secure fit 150 mm Overall Length for extended reach 25 × 25 mm shank for standard toolposts 107.5° Cutting Angle for consistent chip control Robust Clamping for Consistent Performance Designed to accept DN-- 1506 Indexable Inserts, this Turning Holder combines a secure clamping geometry with a standardized ISO profile to minimise vibration and tool movement. The DDHNR 2525 form ensures repeatable seating of the insert, which leads to improved Surface Finish and longer insert life. For workshops that demand steady results, the solid construction reduces downtime for readjustments and supports productive machining cycles. Geometry that Improves Cutting Stability The holder’s 107.5° Cutting Angle and right-hand configuration provide predictable chip flow and reduced cutting forces on common turning operations. Because the cutting-head width is 32 mm, the tool supports effective edge engagement while maintaining rigidity. This geometry helps to stabilise the cut and reduces the risk of chatter, making the Turning Holder suitable for finishing passes and light to medium roughing where dimensional accuracy matters. Compatibility and Practical Application With a shank dimension of 25 mm × 25 mm and an overall length of 150 mm, this Turning Holder fits most standard toolposts and is suitable for small to medium-sized lathes in job shops and maintenance departments. The product is intended for users who rely on indexable tooling systems for flexibility—from prototyping to small-series production. The ISO designation DDHNR 2525 simplifies selection of replacement holders and ensures compatibility across common tooling systems. Easy Setup and Clear Technical Fitment Installation is straightforward: the holder accepts DN-- 1506 inserts and uses the designation M15 for the mounting interface, facilitating quick changeovers. The compact design balances reach with stiffness, and the clear ISO labelling makes it easy to verify fitment before machining. For those less familiar with indexable insert terminology: Indexable Inserts are replaceable cutting tips that allow fast reconditioning of the tool without regrinding; this holder provides the clamping surface that secures those inserts during turning operations. We recommend Teknik Makina’s Turning Holder for reliable, repeatable machining results — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Specifications Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D097TM For Indexable Inserts: DN-- 1506 Suitable Inserts: DN-- 1506 Overall Length: 150 mm Weight: 0.753 kg ISO Designation: DDHNR 2525 Secondary Designation: M15 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Direction: Right Cutting Angle: 107.5° GTIN: 4061905150791 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed for DN-- 1506 Indexable Inserts; using the correct DN-- 1506 grade ensures proper seating and optimal cutting performance. Is the Turning Holder suitable for my standard toolpost? Yes, the Teknik Makina Turning Holder features a 25 mm × 25 mm shank and a 150 mm overall length, which fits most standard toolposts and common lathe setups. Can this holder be used for finishing operations? The 107.5° Cutting Angle and rigid DDHNR 2525 profile of the Teknik Makina Turning Holder support stable cutting conditions suitable for finishing passes where surface quality is important. Where can I get technical support for the Turning Holder by Teknik Makina? For application advice or supplemental technical data regarding the Turning Holder, METAV Werkzeuge offers expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930. 150mm DDHNR 2525 Turning Holder for DN-- 1506 Indexable Inserts, 107.5° - Teknik Makina
150mm DDJNR 2525 Turning Holder for DN-- 1506, 93° - Teknik Makina
Turning Holder DDJNR 2525 — Clamping Holder for DN-- 1506 Indexable Inserts The Turning Holder DDJNR 2525 is a precision clamping tool designed for external turning with DN-- 1506 indexable inserts, offering stable support and consistent cutting performance in metalworking applications. DDJNR 2525 design for DN-- 1506 inserts 150 mm overall length for increased stability 25 x 25 mm shank for rigid clamping 93° cutting angle for reliable chip control Right-hand cutting direction for standard turning operations Enhanced Rigidity for Precise Turning Results The Turning Holder delivers rigidity where it matters: a 25 mm by 25 mm shank combined with a 150 mm overall length minimizes vibration and improves repeatability. This structural stiffness translates directly into better surface finish and longer tool life for indexable inserts, as chatter is reduced and cutting forces are transmitted consistently. The result is a measurable gain in process stability for short to medium-length turning tasks. Optimised Compatibility with DN-- 1506 Indexable Inserts Designed specifically for DN-- 1506 indexable inserts, the holder ensures secure seating and accurate positioning of the insert seat. The 93° cutting angle and right-hand cutting direction provide predictable chip flow and cutting geometry, which simplifies setup and repeat operations. For customers unfamiliar with ISO designations, DDJNR 2525 indicates a standard turning-holder geometry that supports common insert types and eases integration into existing tool inventories. Suited for Workshops and Production Environments This clamping solution targets machinists and small to medium production workshops that require stable, repeatable turning operations without complex adaptations. The holder’s robust build reduces setup time and the need for constant readjustment, making it suitable for series production and maintenance work. For users seeking straightforward retrofitting, the compact dimensions and standard interface allow quick replacement of worn holders with minimal machine downtime. Reliable Standards and Manufacturer Support The holder carries the DDJNR 2525 ISO designation and is engineered by Teknik Makina, reflecting established standards in turning tool design. This alignment with common toolholder norms ensures interchangeability and predictable performance. For technical queries, insert matching or tailored recommendations, METAV Werkzeuge offers competent, hands-on advice and consultancy to ensure the holder fits the intended machining tasks and machine interfaces. Strong recommendation: choose Teknik Makina’s precision clamping solution DDJNR 2525 for consistent turning quality — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Bezeichnung: Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: D172TM For indexable inserts: DN-- 1506 Compatible inserts: DN-- 1506 Overall length: 150 mm Weight: 0.756 kg ISO designation: DDJNR 2525 Secondary designation: M15 Width (shank): 25 mm Height: 25 mm Cutting head width: 32 mm Cutting height: 35 mm Cutting angle: 93° Cutting direction: Right Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder DDJNR 2525 by Teknik Makina? The Turning Holder DDJNR 2525 from Teknik Makina is designed for DN-- 1506 indexable inserts, ensuring correct seating and predictable cutting geometry for those insert types. Can the Turning Holder DDJNR 2525 be used for production turning on lathes? Yes, the Turning Holder DDJNR 2525 by Teknik Makina is suitable for production turning where stable clamping and repeatability are required; METAV Werkzeuge can advise on machine compatibility. How does the 93° cutting angle affect machining with the Turning Holder DDJNR 2525? A 93° cutting angle in the Turning Holder DDJNR 2525 provides reliable chip control and stable cutting forces, which improves surface finish and insert life during standard right-hand turning operations. Who can I contact for technical support or questions about the Turning Holder DDJNR 2525? For specialist consultation regarding the Turning Holder DDJNR 2525 by Teknik Makina, contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930; WhatsApp support is available at +49 170 2837271. 93° DDJNR 2525 Turning Holder for DN-- 1506, 150mm Length, Right Cut - Teknik Makina
150mm DDJNR Turning Holder for DN-- 1504 Indexable Inserts, 93° - Teknik Makina
Turning Holder (Klemmhalter) — Teknik Makina Turning Holder (Klemmhalter) is a compact lathe toolholder designed for reliable left-hand turning with DN-- 1504 indexable inserts, offering stability and repeatable results in production and workshop environments. Teknik Makina Turning Holder DDJNL 2525 model Compatible with DN-- 1504 indexable inserts 150 mm overall length for extended reach 25 x 25 mm shank for stable clamping 93° cutting angle for precise left-hand turning Robust Design for Stable Clamping and Reduced Vibration The DDJNL 2525 toolholder is engineered to deliver a firm and repeatable clamping interface for DN-- 1504 indexable inserts. With a 25 mm shank width and height, and a 32 mm cutting-head width, the holder minimises flex under load, which results in improved surface finish and longer insert life. This structural stability benefits CNC and manual turning alike, translating geometric rigidity into measurable process consistency for everyday workshop tasks. Consistent Cutting Performance for Left-Hand Turning A 93° cutting angle combined with a specified left-hand cutting direction supports controlled chip flow and favourable cutting forces for operations that require left-oriented toolpaths. The geometry reduces radial loading and helps maintain cutting-edge engagement, which can lower the tendency for chatter. For users less familiar with cutting-angle terminology: the cutting angle influences chip formation and tool engagement; a 93° configuration favours strength at the cutting edge while preserving dimensional accuracy. Practical Applications and Who Benefits Most This toolholder is ideal for machinists, small-series production and maintenance workshops that require dependable indexable tooling for turning jobs. The compact 150 mm overall length gives extra reach without compromising stiffness, making the holder suitable for medium-reach turning and facing tasks. Users seeking repeatable set-ups and quick insert changes will find the clamping concept reduces downtime and simplifies tool management. Simple Installation, Adjustment and Maintenance Mounting and routine care are straightforward: the holder mates with standard tool posts and accepts DN-- 1504 inserts; designated seating surfaces ensure correct insert orientation. The ISO designation DDJNL 2525 denotes the holder form factor and shank size, while the additional reference M15 relates to the attachment interface used for specific boring-bar setups. Regular inspection of clamp screws and seating faces prevents misalignment and secures consistent machining performance over time. Strongly recommend the Teknik Makina Turning Holder for reliable, precise left-hand turning; if you are unsure whether this tool matches your requirements or need additional technical information, METAV Werkzeuge offers expert consultation at info@metav-werkzeuge.com or by phone at +49 2822 7131930 and WhatsApp +49 170 2837271 Designation: Klemmhalter Brand: Teknik Makina SKU: D309TM Compatible indexable inserts: DN-- 1504 ISO designation: DDJNL 2525 Secondary designation: M15 Overall length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting-head width: 32 mm Cutting angle: 93° Cutting direction: left Weight: 0.763 kg GTIN: 4061905150876 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder and how are they secured? The Turning Holder from Teknik Makina accepts DN-- 1504 indexable inserts; these inserts are seated into the designed pocket and clamped securely by the holder's clamp mechanism to guarantee repeatable positioning and safe cutting under typical turning loads. Is the Turning Holder suitable for high-speed turning operations? Teknik Makina's Turning Holder (Klemmhalter) is designed for stable clamping and reduced vibration, which supports higher cutting parameters; however, final speed and feed depend on the chosen DN-- 1504 insert grade, workpiece material and machine capability. How do I maintain the Turning Holder to ensure long service life? Regularly check the clamping screw torque, clean seating faces and inspect for wear; with the Teknik Makina Turning Holder, correct maintenance preserves positioning accuracy and prolongs both holder and insert life. Can METAV Werkzeuge advise on whether this Turning Holder fits my machine? Yes, METAV Werkzeuge provides competent consultation for tooling selection; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice regarding the Teknik Makina Turning Holder and compatibility with your setup. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D309TM","sku":"D309TM","mpn":"D309TM","gtin13":"4061905150876","name":"Turning Holder DDJNL 2525 93° DN-- 1504","description":"DDJNR turning holder for DN-- 1504 indexable inserts; 150 mm overall length; 25x25 mm shank; 93° cutting angle; left-hand cutting.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/05/8d/e2/62/62e28d0533927e49dbf377e5/d307-1tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3d/7e/de/62/62de7e3d0aced56449540e95/d313tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/da/7e/de/62/62de7edabd24461b3d5f7a62/d313tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Suitable Inserts","value":"DN-- 1504"},{"@type":"PropertyValue","name":"Overall Length","value":"150 mm"},{"@type":"PropertyValue","name":"Shank Width","value":"25 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting Height","value":"38 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"left"},{"@type":"PropertyValue","name":"ISO Designation","value":"DDJNL 2525"},{"@type":"PropertyValue","name":"Shank Designation 2","value":"M15"},{"@type":"PropertyValue","name":"Weight","value":"0.763 kg"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with DN-- 1504 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 150 mm."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank width 25 mm and shank height 25 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 93° for stable machining."}},{"@type":"Question","name":"Is the cutting direction left or right?","acceptedAnswer":{"@type":"Answer","text":"The holder is configured for left-hand cutting."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-ddjnl-2525-dn-1504","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"DDJNR Turning Holder Series"},{"@type":"Thing","name":"Lathe Turning Accessories"},{"@type":"Thing","name":"Indexable Insert Holders DN-- 1504"}],"mentions":[{"@type":"Thing","name":"ISO DDJNL 2525"},{"@type":"Thing","name":"M15 Shank Designation"},{"@type":"Thing","name":"Teknik Makina Manufacturer"}]}]}
150mm DDNNN Turning Holder for DN-- 1506 Indexable Inserts, 62.5° - Teknik Makina
Turning Holder (Klemmhalter) — DDNNN 2525 for DN-- 1506 Indexable Inserts by Teknik Makina The Turning Holder is a robust clamping toolholder engineered for precise external turning with DN-- 1506 indexable inserts in industrial and workshop lathes. Compatible with DN-- 1506 indexable inserts Robust 150 mm overall length for stability 25 mm Body Width and Height for firm clamping 12.5 mm Cutting Head Width for compact access 62.5° Cutting Angle for accurate chip control Precision and Stability for Reliable Turning Results This holder delivers consistent clamping force and repeatable geometry, which reduces vibration and improves surface finish during external turning. The DDNNN 2525 design ensures secure seating of DN-- 1506 inserts so tool life and part tolerances remain predictable. For workshops that demand dependable repeatability, the rigid construction of this tool reduces rework and increases first-pass yield. Compact Design That Fits Tight Setups With a 150 mm Overall Length and a slim head width of 12.5 mm, the holder is designed for installations where space is limited. The compact cutting head lets operators reach narrow diameters and complex contours without compromising stiffness. This makes the tool particularly suitable for small- to medium-sized components where tool accessibility and stable support are decisive. Built for Compatibility and Simple Integration The DDNNN 2525 ISO designation provides clear referencing for insert selection and machine setup. Compatibility with DN-- 1506 indexable inserts simplifies procurement and reduces inventory complexity. Thanks to standardized mounting dimensions and a defined 62.5° Cutting Angle, setup time is shortened and the holder integrates smoothly into existing tool libraries and tool changer systems. Who Benefits Most from This Holder This holder is aimed at professional machinists and production shops that require a balance of stiffness, accessibility, and standardized tooling. It is particularly advantageous for turning operations on steel and non-ferrous parts where repeatable chip control and compact reach improve cycle times. The product is engineered to support efficient workflows and reliable part quality on conventional and CNC lathes. Choose Teknik Makina precision: contact METAV Werkzeuge for personalised technical advice and confirmation of fit — eMail info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Bezeichnung: Klemmhalter Marke / Manufacturer: Teknik Makina SKU: D106TM For Indexable Inserts: DN-- 1506 Compatible Inserts: DN-- 1506 Overall Length: 150 mm Weight: 0.724 kg ISO Designation: DDNNN 2525 Secondary Designation: M15 Body Width: 25 mm Body Height: 25 mm Cutting Head Width: 12.5 mm Cutting Angle: 62.5° Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed to accept DN-- 1506 indexable inserts; using the specified insert type ensures correct seating and reliable cutting geometry. Can this Turning Holder be used on CNC lathes? Yes, the Teknik Makina Turning Holder with ISO designation DDNNN 2525 is suitable for both conventional and CNC lathe applications where standardized toolholders are required. How does the 62.5° cutting angle affect performance of the Klemmhalter? The 62.5° cutting angle on the Klemmhalter improves chip formation and control during external turning, which helps maintain surface finish and extends insert life under typical cutting conditions. Who can advise on proper setup and compatibility for this Turning Holder? METAV Werkzeuge provides expert support for the Teknik Makina Turning Holder; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance and technical details. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D106TM","sku":"D106TM","mpn":"D106TM","gtin13":"4061905150760","name":"Turning Holder DDNNN 2525 62.5° for DN-- 1506","description":"150mm turning holder for DN-- 1506 indexable inserts, 25mm width, 25mm height, 12.5mm cutting head width; robust machining accessory by Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3e/7e/de/62/62de7e3e148ec6b71020ff84/d104tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/05/8d/e2/62/62e28d05148ec6b710212f24/d104tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/db/7e/de/62/62de7edb0f56dbb4de4dbf4a/d104tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"DN-- 1506"},{"@type":"PropertyValue","name":"Overall Length","value":"150 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.724 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"DDNNN 2525"},{"@type":"PropertyValue","name":"Shank Designation","value":"M15"},{"@type":"PropertyValue","name":"Width","value":"25 mm"},{"@type":"PropertyValue","name":"Height","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"12.5 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"62.5°"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"},{"@type":"PropertyValue","name":"Net Price","value":"48"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with DN-- 1506 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 150 mm."}},{"@type":"Question","name":"What are the holder dimensions?","acceptedAnswer":{"@type":"Answer","text":"Width 25 mm, height 25 mm, cutting head width 12.5 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 62.5°."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Lathe Tooling"},{"@type":"Thing","name":"Indexable Insert Compatibility"}],"mentions":[{"@type":"Thing","name":"DN-- 1506 inserts"},{"@type":"Thing","name":"DDNNN 2525 ISO designation"},{"@type":"Thing","name":"M15 shank"}]}]}
150mm DSSNR 2525 Turning Holder for SNMG 1204, 45°, right, 0.576kg - Teknik Makina
Turning Holder — DSSNR for SNMG Indexable Inserts by Teknik Makina The Turning Holder is a precision clamping tool designed for SNMG 1204 indexable inserts, suited to professional turning operations and tight-access machining tasks. Turning Holder for SNMG 1204 inserts ISO DSSNR 2525 design for secure clamping 150 mm overall length for extended reach 45° cutting angle for controlled chip flow 25 x 25 mm shank for increased rigidity Reliable Clamping for Consistent Turning Results A secure connection between Toolholder and Insert is essential for repeatable finishes. The DSSNR 2525 geometry provides firm clamping of SNMG 1204 inserts, reducing micro-vibration and enabling a more consistent Surface Finish. For operators focused on predictable results, this Holder translates into fewer reworks and a steadier process across batch production. Optimised Geometry That Handles Higher Cutting Forces The combination of a 45° cutting angle and a 32 mm wide cutting head concentrates cutting forces into a stable contact area. This reduces deflection during transverse cuts and helps maintain tolerance adherence. For machinists, that means the ability to apply moderate depths of cut with improved dimensional stability compared to less rigid holders. Compact Reach and Ideal Use Cases With a total Length of 150 mm, the tool is particularly useful for turning operations that require reach into recesses or when working on components with limited tool clearance. The design is aimed at workshops and production environments machining steels and general-purpose materials where a balance of access and stiffness is required. Simple Compatibility and Mounting Details The holder accepts SNMG 1204 indexable inserts and uses an M12 clamping interface for the securing screw, making replacement and setup straightforward. This familiar mounting standard facilitates quick plate changes and helps reduce machine downtime during tool swaps, which is valuable in both single-part and series production contexts. We recommend Teknik Makina’s Turning Holder for demanding turning tasks; for tailored advice, technical clarifications or help selecting the right configuration, contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Details Bezeichnung: Klemmhalter Brand / Manufacturer: Teknik Makina SKU: D212TM For Indexable Inserts: SNMG 1204 ISO Designation: DSSNR 2525 Overall Length: 150 mm Weight: 0.576 kg Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Height: 35 mm Cutting Angle: 45° Cutting Direction: right Clamping Screw Thread: M12 GTIN: 4061905151545 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed for SNMG 1204 indexable inserts, allowing straightforward use of this common insert format. How does the 45° cutting angle affect performance on the Turning Holder? The 45° cutting angle on the Teknik Makina Turning Holder promotes controlled chip flow and reduced cutting forces normal to the workpiece, which helps maintain dimensional stability during turning. Is the Turning Holder easy to mount and replace inserts? Yes, the Turning Holder uses an M12 clamping screw interface, making insert changes and secure mounting quick and reliable for workshop routines. Which applications are best suited to the Teknik Makina Turning Holder? This Turning Holder is ideal for general turning tasks requiring access into tighter bores or recesses, and for shops prioritising a balance of reach and rigidity. 150mm DSSNR 2525 Turning Holder for SNMG 1204, 45° Right, 0.576 kg - Teknik Makina
150mm DWLNL 2525 Turning Holder for WN-- 0604, 95° left - Teknik Makina
Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is a robust toolholder designed for secure clamping of WN-- 0604 indexable inserts, delivering stable left-hand turning and precise machining in workshop and production environments. For WN-- 0604 indexable inserts DWLNL 2525 ISO designation Overall length 150 mm 25 x 25 mm shank cross-section 95° cutting angle for stable left-hand cuts Robust Design for Consistent Clamping Constructed to provide repeatable results, this toolholder features the DWLNL 2525 ISO geometry that secures WN-- 0604 inserts with high repeatability. The compact 25 x 25 mm shank and 32 mm cutting-head width minimise vibration and deflection, which reduces tool wear and contributes to longer insert life. For users who value uptime, the robust clamping interface means fewer re‑setups and more parts produced per shift. Precision Geometry That Improves Surface Finish The 95° cutting angle supports stable left-hand cutting by optimising the engagement of the insert with the workpiece; this geometry helps maintain consistent chip flow and surface quality. Explaining briefly: the cutting angle describes the orientation between the toolholder axis and the cutting edge, influencing chip formation and cutting forces. With this holder, shops can expect improved surface finishes when using the specified WN-- 0604 inserts. Suited for Diverse Turning Applications Designed for manual lathes and CNC turning centres that accept a 25 x 25 mm tool shank, the holder is especially useful where compact reach and precise indexable insert positioning are required. Its overall length of 150 mm provides adequate reach for a wide range of diameters while keeping stiffness high. Ideal for workshops producing batches or performing repair work, the holder supports efficient changeovers and consistent part quality. Fast Mounting and Reliable Fixing The clamping screw specification M06 ensures secure and straightforward fastening of the insert seat, enabling fast tool changes and minimal downtime. Because the holder is manufactured by Teknik Makina to defined ISO dimensions, it fits standard tool posts and turrets designed for DWLNL-type holders. The combination of clear ISO designation and standardised fixing reduces setup complexity and eases tool inventory management. Strongly recommended: choose the Teknik Makina Turning Holder with DWLNL 2525 geometry for reliable left-hand turning — for tailored technical advice or to confirm fitment, contact METAV Werkzeuge via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or WhatsApp +49 170 2837271. Technical data Bezeichnung: Turning Holder (Klemmhalter) Brand/Manufacturer: Teknik Makina SKU: D319TM GTIN: 4061905150968 Suitable Indexable Inserts: WN-- 0604 ISO designation: DWLNL 2525 Secondary designation / Screw: M06 Overall length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting-head width: 32 mm Cutting angle: 95° Cutting direction: left Weight: 0.772 kg Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina? The Turning Holder from Teknik Makina is designed specifically for WN-- 0604 indexable inserts; using the correct insert type ensures the intended fit and cutting performance. Can the Teknik Makina Turning Holder be mounted on standard tool posts? Yes, the Turning Holder follows the DWLNL 2525 ISO dimensions and the 25 x 25 mm shank format, so it is compatible with tool posts and turrets that accept DWLNL-style holders. Which cutting direction is supported by the Turning Holder by Teknik Makina? This Turning Holder is configured for left cutting direction with a 95° cutting angle, which should be matched to your machining setup and chosen insert geometry. Who can I contact for installation or technical questions about the Turning Holder? METAV Werkzeuge offers expert advice on the Teknik Makina Turning Holder and can assist with technical data, compatibility checks and ordering. Contact METAV at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271. 95° Turning Holder DWLNL 2525 for WN-- 0604, 150mm Length - Teknik Makina
150mm DWLNR 2525 Turning Holder for WN-- 0804, 95° right - Teknik Makina
Klemmhalter (Turning Holder) by Teknik Makina The Klemmhalter (Turning Holder) is a precision clamping tool for indexable inserts WN-- 0804, designed for right-hand turning operations in professional workshops. Klemmhalter for WN-- 0804 indexable inserts ISO designation DWLNR 2525 for consistent fit 150 mm overall length for stable overhang Compact 25 mm × 25 mm shank for tight tool posts 95° cutting angle optimized for right-hand turning Precision fit and reliable insert seating Engineered to accept WN-- 0804 indexable inserts, this clamping holder provides a secure and repeatable seat that reduces vibration and runout. The holder’s geometry is optimised to ensure the insert sits squarely under cutting forces, so users benefit from improved surface finish and longer insert life. Compatibility with common machine tool tool posts makes setup straightforward for production runs and single-part machining alike. Stable overhang for consistent machining Thanks to a 150 mm overall length combined with a compact shank, the holder balances accessibility and rigidity to minimise deflection during cuts. This configuration supports stable turning on medium overhangs, allowing machinists to maintain tight tolerances without sacrificing reach. The controlled overhang helps preserve tool life and reduces the need for corrective machining steps. Compact shank and robust clamping geometry With a shank dimension of 25 mm × 25 mm and a 32 mm cutting head width, the design focuses on dependable clamping while fitting common tool posts. The compact cross-section ensures secure tightening even in confined setups, so the clamping action remains consistent across repeated tool changes. For users, this means predictable performance and less downtime for adjustment. Optimised cutting angle for effective chip flow The 95° cutting angle supports efficient right-hand cutting directions and helps direct chips away from the workpiece, improving operator safety and surface quality. For customers less familiar with cutting geometry: the cutting angle describes the orientation between the tool’s face and the workpiece contact plane; an optimised angle reduces cutting forces and enhances chip control, resulting in smoother operations and reduced tool wear. Suited for professional workshops and production environments Ideal for workshop technicians and production engineers who use indexable insert tooling, this clamping holder is designed to integrate with established turning setups and insert standards. Its straightforward interface with WN-- 0804 inserts makes procurement and stocking simpler, while the ISO DWLNR 2525 designation assists in ensuring the correct holder family is selected for your tooling system. For precise, reliable right-hand turning, trust the Teknik Makina clamping solution — for personalised advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D178TM For indexable inserts: WN-- 0804 Overall length: 150 mm Weight: 0.793 kg ISO designation: DWLNR 2525 Secondary designation: M08 Width: 25 mm Height: 25 mm Cutting head width: 32 mm Cutting angle: 95° Cutting direction: right GTIN: 4061905150920 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter by Teknik Makina Turning Holder? The Klemmhalter from Teknik Makina is made to accept WN-- 0804 indexable inserts, and the Turning Holder’s ISO designation DWLNR 2525 ensures a standardised fit for these inserts in common turning applications. Can the Klemmhalter be used for left-hand turning operations? This Teknik Makina Klemmhalter Turning Holder is specified for right-hand cutting direction; for left-hand operations, a holder designed for left-hand cutting should be selected to match machining and safety requirements. How does the 95° cutting angle affect machining with this Turning Holder? A 95° cutting angle on the Klemmhalter influences chip direction and cutting forces: it helps divert chips away from the workpiece and can reduce cutting loads, which supports better surface finish and longer insert life in right-hand turning. Who can I contact if I need help choosing or fitting the Klemmhalter from Teknik Makina? If you need guidance on whether the Klemmhalter Turning Holder meets your requirements or require additional technical data, METAV Werkzeuge offers expert advice — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 95° DWLNR 2525 Turning Holder for WN-- 0804, 150mm Length, Right - Teknik Makina
150mm for DCMT 11T3, 93° SVJCL 2525 Turning Holder with Internal Cooling - Teknik Makina
Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder SVJC for VCMT Indexable Inserts provides secure clamping for DCMT 11T3 inserts and is designed for precision external turning in professional metalworking applications. Compatible with DCMT 11T3 indexable inserts Stable SVJCL 2525 clamping geometry for repeatability Integrated internal coolant for improved chip evacuation 150 mm Overall length for extended reach 93° Cutting angle for controlled material engagement Robust design and reliable insert compatibility The tool body is engineered to accept DCMT 11T3 indexable inserts and follows the SVJCL 2525 ISO designation, delivering a predictable interface between insert and holder. With a 150 mm overall length and a compact 25 mm cross-section, the holder offers a balance of stability and accessibility that reduces chatter and improves surface finish. This design choice leads to fewer rejects and a more consistent cut when changing inserts. Precise cutting geometry for consistent results A defined 93° cutting angle and left-hand cutting orientation produce reliable chip formation and controlled cutting forces. The holder’s geometry supports a focused contact area that enhances dimensional accuracy and surface quality, making it suitable for finishing and semi-finishing operations where tight tolerances matter. Precision in the toolholder translates directly into repeatable part quality. Internal coolant and maintenance-friendly assembly Equipped with Internal Coolant, the holder channels cutting fluid directly to the cutting edge, improving cooling and chip evacuation which extends insert life and lowers thermal deformation. Routine maintenance is simplified by the accessible fastening using a T15 Torx key and M3.5x11 Torx screw, allowing quick insert changes and secure clamping without specialised tools. Intended users and workshop applications Designed for professional workshops and CNC turning centres, this clamping solution from Teknik Makina suits machinists who require dependable performance for medium to heavy-duty external turning. The combination of compact dimensions and coolant capability makes it particularly useful in mixed-production environments where flexibility, tool life and surface integrity are priorities. Strong recommendation: Choose the Teknik Makina Turning Holder for dependable, coolant-fed turning — for specification checks or application advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Designation: Turning Holder (Klemmhalter) Brand / Manufacturer: Teknik Makina SKU: AP536TM For Indexable Inserts: DCMT 11T3 ISO Designation: SVJCL 2525 Overall Length: 150 mm Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Height: 35 mm Cutting Angle: 93° Cutting Direction: Left Internal Coolant: Yes Toolholder Shank Designation: M16-IK Torx Key: T15 Torx Screw: M3.5x11 Weight: 0.735 kg Availability: In Stock Condition: New GTIN: 4061905052606 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is specified for DCMT 11T3 indexable inserts; the SVJCL 2525 interface ensures correct seating and clamping of these inserts for consistent cutting performance. Does the Teknik Makina Turning Holder support coolant supply? Yes, the Teknik Makina Turning Holder features Internal Coolant, which directs fluid to the cutting edge to enhance cooling and chip evacuation, thereby prolonging insert life. How is the insert secured and maintained on the Turning Holder? Inserts on this Turning Holder are secured with a Torx screw assembly (use a T15 key with an M3.5x11 screw), allowing straightforward insert changes and reliable clamping for repeatable machining results. 150mm Turning Holder SVJCL 2525 for DCMT 11T3, 93° With Internal Cooling - Teknik Makina
150mm MTENN 2525 Turning Holder for TN-- 1604 Indexable Inserts, 60° - Teknik Makina
Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is a compact, robust tool holder for precision turning, designed to accept TN-- 1604 indexable inserts for stable shop-floor performance. Compact 150 mm Length for stable turning Compatible with TN-- 1604 indexable inserts 25 x 25 mm Shank for secure clamping 12.5 mm Cutting Head Width for fine profiles 60° Cutting Angle for versatile turning Precision turning with consistent clamping and repeatability Engineered for professional workshops, the Turning Holder delivers reliable positioning and repeatable results when paired with TN-- 1604 indexable inserts. The precise geometry of the Clamp and the 60° Cutting Angle minimize chatter and support consistent tool engagement, so operators can focus on cycle time and surface quality rather than constant readjustment. This makes the Holder particularly suitable for batch production and demanding finishing passes. Stable toolholding thanks to compact design and rigid shank The compact 150 mm Length combined with a 25 mm Shank Width and 25 mm Shank Height provides a low overhang and high rigidity for reduced vibration. Because stiffness directly affects surface finish and tool life, this Holder helps achieve better results with less tool wear. The 12.5 mm Cutting Head Width supports narrow-profile turning while maintaining strength at the clamping point. Easy integration and compatibility for efficient shop workflows Designed for simple assembly into existing setups, the Holder accepts standard TN-- 1604 indexable inserts and uses the ISO Designation MTENN 2525, simplifying tool selection and inventory. Shops benefit from quick Insert changes and predictable mounting, reducing downtime and enabling faster clamping cycles. The clear compatibility reduces the need for special tooling and streamlines production planning for turning tasks. Built for professionals with accessible technical support Manufactured by Teknik Makina, this Holder combines straightforward mechanics with durable construction for everyday use in metalworking environments. For questions about fitment, installation, or specific machining parameters, METAV Werkzeuge offers expert consultation to ensure the Holder meets application requirements. Assistance is available for technical clarifications and setup advice to help integrate the tool seamlessly into your workflow. Strong recommendation from Teknik Makina: choose this Turning Holder for robust, repeatable turning operations — for assistance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: D110TM Compatible Inserts: TN-- 1604 Total Length: 150 mm Weight: 0.724 kg ISO Designation: MTENN 2525 Designation 2: M16 Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 12.5 mm Cutting Height: 35 mm Cutting Angle: 60° GTIN: 4061905151217 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which inserts are recommended? The Turning Holder by Teknik Makina is compatible with TN-- 1604 indexable inserts; using inserts specified for TN-- 1604 ensures correct seating and clamping, which in turn supports optimal cutting performance and tool life. Can the Klemmhalter be mounted in standard tool posts and what are the key dimensions to check? The Klemmhalter (Turning Holder) from Teknik Makina features a 25 mm Shank Width and 25 mm Shank Height with a Total Length of 150 mm; verifying these dimensions against your tool post ensures proper fit and stable mounting. How does the 60° Cutting Angle affect turning operations with this Turning Holder? A 60° Cutting Angle on the Teknik Makina Turning Holder offers versatile engagement for general turning profiles, providing a balance between cutting force distribution and surface finish for common turning applications. Who can I contact for technical support or fitment questions about the Klemmhalter? For expert advice on the Klemmhalter from Teknik Makina, METAV Werkzeuge provides comprehensive consultation — contact info@metav-werkzeuge.com, call +49 2822 7131930, or reach out via WhatsApp at +49 170 2837271. 150mm MTENN 2525 Turning Holder for TN-- 1604 Indexable Inserts, 60° - Teknik Makina
150mm MTJNL 2525 Turning Holder for TN-- 1604, 93° left - Teknik Makina
Turning Holder MTJNL 2525 — Clamping Holder for TN-- 1604 Inserts by Teknik Makina Turning Holder MTJNL 2525 is a precision Clamping Holder designed for left-hand turning with TN-- 1604 indexable inserts, offering stable cutting performance in demanding metalworking applications. For TN-- 1604 indexable inserts 150 mm Overall Length ISO designation MTJNL 2525 Left-hand cutting, 93° cutting angle 25 x 25 mm Shank, 32 mm Head Width Precision clamping that improves tool stability The Turning Holder provides a secure seating for TN-- 1604 Indexable Inserts, which reduces micro-movements at the Insert Seat and therefore improves surface finish and tool life. Thanks to the proven clamping geometry, the Holder minimises chatter during heavy cuts and delivers consistent chip control, so operators achieve reproducible results with fewer interruptions for rework or adjustment. Compact dimensions for greater rigidity and access With a 150 mm Overall Length and a 25 x 25 mm Shank, the toolholder combines compactness with rigidity to support precise machining in confined setups. The relatively short Overhang increases stiffness, which directly benefits cutting stability and dimensional accuracy on turned parts. This makes the Holder well suited for setups where access and repeatable concentricity are critical. Designed for left-hand turning with defined cutting geometry The Holder is configured for left-hand operations and features a 93° Cutting Angle, optimised for specific turning strategies and insert seat orientation. The geometry helps to direct cutting forces into the toolbody, lowering vibration and enabling predictable tool-wear patterns. For users less familiar with indexable systems: TN-- 1604 denotes the compatible Insert Type and size, ensuring straightforward selection and replacement. Proven manufacturer quality and immediate availability Teknik Makina manufactures this Clamping Holder to industrial standards and the product is listed as in Stock, supporting fast procurement for production or maintenance needs. The ISO designation and clear dimensional data simplify integration into existing tool libraries, while Teknik Makina’s focus on repeatable manufacturing ensures that the Holder matches the tolerances expected in professional turning environments. Choose Teknik Makina quality: for expert advice and order support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists help determine suitability and provide technical guidance. Designation: Klemmhalter Brand (Marke): Teknik Makina SKU: D334TM Compatible Inserts: TN-- 1604 Overall Length: 150 mm Weight: 0.76 kg ISO Designation: MTJNL 2525 Secondary Designation: M16 Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Height: 35 mm Cutting Direction: Left Cutting Angle: 93° GTIN: 4061905151156 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder MTJNL 2525 from Teknik Makina? The Turning Holder MTJNL 2525 from Teknik Makina is compatible with TN-- 1604 indexable inserts; this designation defines the Insert Type and dimension, ensuring correct seating and reliable performance when the recommended inserts are used. Can the Teknik Makina Turning Holder MTJNL 2525 be used for heavy cutting? The Teknik Makina Turning Holder MTJNL 2525 is designed with a compact 150 mm length and robust 25 x 25 mm Shank to enhance rigidity, making it suitable for demanding turning tasks where stable engagement and reduced vibration are required. How does the 93° cutting angle affect machining with the Turning Holder MTJNL 2525? A 93° Cutting Angle on the Turning Holder MTJNL 2525 directs cutting forces into the toolbody for improved stability and predictable wear; this geometry supports consistent surface quality and helps control chip flow during left-hand operations. Is the Turning Holder MTJNL 2525 available immediately and who can provide technical advice? The Turning Holder MTJNL 2525 by Teknik Makina is listed as in Stock, and METAV Werkzeuge offers expert consultation—contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support and additional technical data. 150mm MTJNL 2525 Turning Holder for TN-- 1604, 93° Left, M16, 25x25 mm – Teknik Makina
150mm MTJNL 2525 Turning Holder for TN-- 2204 Indexable Inserts, 93° left cut - Teknik Makina
Turning Holder (Klemmhalter) from Teknik Makina The Turning Holder MTJNL 2525 is a precision clamping tool for TN-- 2204 indexable inserts, engineered for reliable left-hand turning operations on metalworking lathes. For TN-- 2204 indexable inserts 150 mm overall length for varied setups ISO MTJNL 2525 for secure, repeatable clamping Left-hand cutting with 93° cutting angle 32 mm cutting head width for stable contact Consistent Clamping and Compatibility for Workshop Use Built for repeatable results, the Turning Holder offers a stable platform for TN-- 2204 indexable inserts. Its ISO MTJNL 2525 designation ensures compatibility with common insert geometries, reducing setup time and alignment errors. For users who value uptime, the 150 mm overall length gives flexibility in mounting positions while the 32 mm cutting head width improves insert support, which translates into fewer vibrations and longer Insert Life. Precision Geometry That Boosts Cutting Reliability Thanks to the 93° Cutting Angle and Left-hand Cutting orientation, this holder concentrates cutting forces where the insert seats best, improving surface finish and dimensional control. The defined cut geometry minimizes chatter and simplifies toolpath planning on turning operations. For machinists aiming for consistent tolerances, that focused geometry is a direct contributor to process stability and predictable tool wear. Practical Use Cases and Target Users This clamping tool is designed for shops performing medium-duty turning tasks that require reliable insert retention and easy indexing. Typical applications include component turning, facing, and light profiling where TN-- 2204 inserts are preferred. Small job shops and production lines benefit from reduced setup variance, while maintenance teams appreciate the clear interface between holder and insert for quick replacements. Installation, Handling and a Short Explanation for Newcomers Mounting is straightforward: align the holder to the tool post, secure per machine specifications, and insert the TN-- 2204 indexable insert into the pocket. The ISO code (MTJNL 2525) denotes the holder form and clamping style; it helps you match inserts and toolposts without trial-and-error. Regular inspection of the clamping screw and seat keeps contact surfaces clean and prevents premature wear, ensuring consistent performance over time. Choose Teknik Makina's Turning Holder for dependable left-hand turning and contact METAV Werkzeuge for expert advice and tailored support via info@metav-werkzeuge.com or WhatsApp +49 170 2837271 Technical Data Bezeichnung: Turning Holder Brand: Teknik Makina SKU: D340TM For Indexable Inserts: TN-- 2204 Compatible Inserts: TN-- 2204 Overall Length: 150 mm Weight: 0.775 kg ISO Designation: MTJNL 2525 Secondary Designation: M22 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Direction: Left Cutting Angle: 93° GTIN: 4061905151187 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed specifically for TN-- 2204 indexable inserts, ensuring a precise fit when using compatible inserts with the MTJNL 2525 pocket. Is the Teknik Makina Turning Holder suitable for left-hand operations? Yes, the Teknik Makina Turning Holder supports Left-hand Cutting and is configured with a 93° cutting angle to suit left-hand turning applications. How do I maintain the Turning Holder to ensure longevity? Regularly clean the clamping seat and check the clamping screw on the Turning Holder; simple checks prevent deformation and maintain secure insert seating, preserving cutting performance. Can METAV Werkzeuge advise on whether this Turning Holder meets my requirements? If uncertain whether the Turning Holder from Teknik Makina fits specific machining needs, METAV Werkzeuge provides detailed consultation—contact info@metav-werkzeuge.com or call +49 2822 7131930 or WhatsApp +49 170 2837271 for assistance. 150mm MTJNL 2525 Turning Holder for TN-- 2204 Indexable Inserts, 93° Left Cut - Teknik Makina
150mm MTJNR 2525 Turning Holder for TN-- 2204, 93° - Teknik Makina
Turning Holder for Indexable Inserts by Teknik Makina The Turning Holder is designed to securely clamp TN-- 2204 indexable inserts for precision turning tasks on CNC lathes. Compatible with TN-- 2204 indexable inserts Overall length 150 mm for compact setups 25 mm shank width and 25 mm height 32 mm cutting head width for stable clamping 93° cutting angle with right-hand operation Reliable Clamping for Consistent Surface Quality The toolholder delivers stable clamping of TN-- 2204 inserts, which directly improves Surface Finish and Extends Tool Life. Its proven geometry reduces Micro-Vibration during cuts, allowing higher Cutting Parameters without sacrificing Accuracy. For production environments where repeatability matters, this Holder offers predictable results and fewer reworks thanks to its robust clamp design. Rigidity and Design That Withstand Demanding Cuts With a Shank Width of 25 mm and a Cutting Head Width of 32 mm, the Holder provides increased Rigidity that supports heavier feeds and depths of cut. The compact Overall Length of 150 mm helps to minimize Overhang and thus reduces tool deflection. This design advantage leads to more efficient Material Removal and stable chip formation with less spindle load. Engineered Compatibility and Clear Technical Reference The device follows the ISO designation MTJNR 2525, ensuring easy identification when selecting Toolholders and Inserts. The right-hand Cutting Direction and the 93° Cutting Angle are suited for standard external turning operations on conventional and CNC lathes. For users with limited experience: the ISO designation is a common reference that matches Holder geometry to Insert specification, simplifying procurement and machine setup. Fast Setup, Practical Use and Support Mounting and adjustment are straightforward, with a secondary designation of M22 for the clamping interface that aligns with common workshop tooling. This reduces Setup Time and lowers the risk of incorrect fastening. If there is any uncertainty about suitability or integration with a specific lathe, METAV Werkzeuge provides technical advice and application support to ensure the Holder matches your machining requirements. Choose Teknik Makina’s Turning Holder for dependable Precision and durability — for personalized advice contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Data Designation: Turning Holder Brand: Teknik Makina SKU: D202TM Compatible Inserts: TN-- 2204 Overall Length: 150 mm ISO Designation: MTJNR 2525 Secondary Designation: M22 Shank Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 93° Cutting Direction: Right Weight: 0.775 kg GTIN: 4061905151125 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is compatible with TN-- 2204 indexable inserts; the Holder geometry and ISO designation MTJNR 2525 ensure correct seating and reliable clamping for these Inserts. Can the Turning Holder be used for heavy-duty turning? Yes, the Turning Holder’s 25 mm Shank Width and 32 mm Cutting Head Width provide sufficient Rigidity for many demanding external turning tasks, offering stable performance under higher feeds. How do I mount the Teknik Makina Turning Holder on my lathe? Mounting uses the M22 clamping interface specified for this Holder; follow your machine’s tooling guidelines and secure the clamping screw accordingly, or contact METAV Werkzeuge for step-by-step assistance. Is the Turning Holder available for immediate delivery? The Teknik Makina Turning Holder is listed as in Stock; for exact lead times or shipping enquiries, METAV Werkzeuge can provide up-to-date availability and help coordinate delivery. 93° MTJNR 2525 Turning Holder for TN-- 2204, 150 mm Length, M22 — Teknik Makina
150mm PCLN for CNMG 1204 Indexable Inserts, PCLNR 2525, 95° with Internal Coolant - Teknik Makina
Turning Holder — PCLN for CNMG Indexable Inserts Turning Holder by Teknik Makina is a robust toolholder designed to secure CNMG 1204 indexable inserts for precise external turning operations. PCLNR 2525 for CNMG 1204 inserts 150 mm overall length for extended reach Internal coolant for improved chip evacuation 25 x 25 mm shank for stable turning 95° cutting angle for right-hand operations Precision and Rigidity for Accurate Turning Built for shops that demand repeatable results, this clamping tool combines Precision and Rigidity to minimise vibration and tool deflection during cuts. The PCLNR 2525 interface ensures a consistent seat for CNMG 1204 inserts, so each cut maintains dimensional accuracy and surface finish. Operators benefit from reliable clamping force and a geometrically stable setup that supports high-feed and finishing passes without compromising part tolerances. Optimised Cooling and Chip Control for Longer Insert Life Equipped with Internal Coolant, the holder channels cutting fluid directly to the cutting edge, promoting efficient Chip Control and reducing built-up edge on the insert. Enhanced cooling lowers cutting temperatures, which can extend insert life and reduce wear rates. This feature is particularly useful for interrupted cuts or machining tougher steels, where thermal management directly impacts tool performance and process stability. Compact Dimensions that Improve Workshop Productivity The 25 x 25 mm shank and a 32 mm cutting head width deliver a compact, stiff package that fits common turret stations and reduces interference in tight setups. With a 150 mm overall length, the tool offers additional reach for machining deeper features while maintaining a stable cutting stance. These attributes contribute to quicker setup changes and fewer toolholder swaps, making daily shop routines more efficient. Intended Users and Typical Applications Designed for professional turning shops, maintenance workshops and production lines, this holder targets machinists who use CNMG 1204 inserts for medium to heavy turning tasks. The holder’s right-hand 95° cutting orientation and secure fixation make it suitable for external profiling, facing and light roughing operations. Users looking for a dependable toolholder that supports aggressive feeds without sacrificing surface quality will find this solution effective. For precise and dependable turning operations we recommend the Teknik Makina Turning Holder — contact METAV Werkzeuge for dedicated technical support via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: AP132TM For Indexable Inserts: CNMG 1204 ISO Designation: PCLNR 2525 Designation 2: M12-IKG1/8 Overall Length: 150 mm Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Height: 30 mm Cutting Angle: 95° Cutting Direction: Right Internal Coolant: Yes Clamp Screw: TH821 Knee Lever: TL4 Roll Pin: TS-4 Allen Key: 3 Allen Weight: 0.781 kg GTIN: 4061905150296 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit this Turning Holder and who makes it? The Turning Holder by Teknik Makina is designed for CNMG 1204 indexable inserts and provides the PCLNR 2525 mounting interface for secure seating and precise positioning. Does the Turning Holder support coolant-through operation? Yes, the Teknik Makina Turning Holder features internal coolant to direct fluid to the cutting edge, improving chip evacuation and thermal control during machining. What are the key dimensions and who can advise on suitability? The holder has a 150 mm overall length with a 25 x 25 mm shank and a 32 mm cutting head width; for tailored advice on whether this Turning Holder matches your setup, METAV Werkzeuge offers expert consultation at info@metav-werkzeuge.com or +49 2822 7131930. Is the Turning Holder suitable for right-hand turning? Yes, the Teknik Makina Turning Holder is configured for right-hand cutting with a 95° cutting angle, making it suitable for standard external turning tasks. 150mm Turning Holder PCLNR 2525, 95° With Internal Coolant For CNMG 1204 - Teknik Makina
150mm PCLNL 2525 Turning Holder for CNMG 1204, 95° with Internal Cooling - Teknik Makina
Turning Holder (Klemmhalter) — PCLN for CNMG Indexable Inserts by Teknik Makina The Turning Holder is a robust PCLN tool holder designed for CNMG 1204 indexable inserts, providing secure clamping and reliable performance for left-hand turning operations. Compatible with CNMG 1204 indexable inserts Internal coolant for improved chip evacuation ISO PCLNL 2525 profile for stable clamping 150 mm overall length for standard toolposts Left-hand cutting with 95° cutting angle Precision clamping for consistent machining results A toolholder that delivers repeatable results reduces setup time and scrap. The Turning Holder uses the ISO PCLNL 2525 profile to ensure stable clamping of CNMG 1204 inserts, so the insert seat remains rigid under cutting forces. This design focus translates into more consistent diameters and surface finishes on turned parts, which is particularly valuable for batch production and tight-tolerance workpieces. Improved chip control thanks to internal coolant Internal coolant is integrated to support continuous cutting processes and better thermal control at the cutting edge. By directing coolant through the shank toward the insert pocket, this holder improves chip evacuation and coolant delivery, reducing built-up edge and extending insert life. Workshops that run medium to long cycles will benefit from reduced tool wear and fewer unscheduled tool changes. Standard dimensions for effortless integration into setups With a 150 mm overall length and a 25 x 25 mm shank, the holder fits common toolposts and fixtures without the need for custom adapters. The 32 mm cutting head width and 30 mm cutting height are matched to CNMG 1204 geometry, while the 95° cutting angle and left-hand orientation suit a wide range of turning applications. These standardized dimensions make retrofitting and tool inventory management straightforward. Practical handling and maintenance on the shop floor Installation and routine maintenance are simplified: the clamping screw specification TH821 and the supplied Allen key requirement (3 Allen) make insert changes fast and reliable. Technicians will appreciate the clear access to the clamping elements and the robust mechanical components like the TL4 lever and TS-4 dowel pin, which support repeatable seating and torque behaviour. This holder is engineered for everyday use in demanding machining environments. Highly recommend Teknik Makina’s Turning Holder for workshops seeking durable, coolant-capable holders — contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Specifications Bezeichnung: Klemmhalter Marke / Hersteller: Teknik Makina SKU: AP142TM For indexable inserts: CNMG 1204 Compatible inserts: CNMG 1204 Overall length: 150 mm Weight: 0.781 kg Allen key: 3 Allen Internal coolant: Yes ISO designation: PCLNL 2525 Secondary designation: M12-IKG1/8 Width: 25 mm Height: 25 mm Cutting head width: 32 mm Clamping screw: TH821 Knee lever: TL4 Cutting direction: left Cutting angle: 95° Cutting height: 30 mm GTIN: 4061905150326 Label: Klemmhalter PCLNL 2525 95° CNMG 1204 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which sizes are supported? The Turning Holder from Teknik Makina is designed specifically for CNMG 1204 indexable inserts; the holder geometry and pocket dimensions match CNMG 1204 to ensure correct seating and cutting clearance. Does the Teknik Makina Turning Holder provide coolant to the cutting edge? Yes, the Teknik Makina Turning Holder includes internal coolant to improve coolant delivery and chip evacuation, which supports longer insert life and more stable cutting conditions. Which tools are required to change inserts in the Turning Holder? Insert changes and clamping adjustments for the Turning Holder typically require a 3 Allen key for the clamping screw TH821; this makes routine maintenance quick and predictable. Is the Turning Holder suitable for left-hand turning operations? The Turning Holder is configured for left-hand cutting with a 95° cutting angle, making it suitable for applications that require left-direction machining on standard lathes. Who can I contact for further technical details or personalised advice on the Turning Holder? For detailed application support, METAV Werkzeuge offers expert consultation on the Turning Holder by Teknik Makina; contact info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271. 150mm PCLNL 2525 Turning Holder, 95° Cut Angle, Internal Cooling, For CNMG 1204 Inserts - Teknik Makina
150mm PCLNR 2525 Turning Holder for CNMG 1204, 95° - Teknik Makina
Turning Holder PCLNR 2525 – PCLN Turning Holder for CNMG 1204 Inserts by Teknik Makina The Turning Holder PCLNR 2525 is a right-hand clamping tool for CNMG 1204 indexable inserts, engineered for stable, high-precision turning operations in professional workshops and CNC lathes. Turning Holder PCLNR 2525 for CNMG 1204 inserts Overall length 150 mm for secure reach 95° cutting angle for stable cutting 25 × 25 mm shank for rigid mounting Right-hand cutting direction for turning Consistent clamping for reliable machining results Designed to deliver repeatable performance, this Turning Holder clamps CNMG 1204 inserts securely to minimize vibration and edge deflection. The robust clamping geometry supports stable chip formation and surface finish, which reduces rework and improves cycle-time consistency. For operators, this means fewer adjustments and more predictable output on production runs. Compact dimensions with proven tool geometry With an overall length of 150 mm and a 25 × 25 mm shank, the holder combines compactness with stiffness. The 95° approach angle and 32 mm cutting head width provide a controlled cutting geometry that suits facing and light to medium turning tasks. The ISO code PCLNR 2525 indicates a square shank profile that simplifies fixture selection and ensures compatibility with standard tool posts. Made for professional shops and CNC setups This Turning Holder is intended for machinists, maintenance workshops and small-batch production environments that require dependable indexable tooling. Its design focuses on operational efficiency: fast insert changes with minimal set-up time and compatibility with widely used CNMG 1204 inserts make it suitable for a variety of steels and cast materials. For team workflows, it supports consistent quality across shifts. Practical mounting and compatibility details The clamping screw thread specified as M12 enables secure attachment and easy maintenance. The holder’s right-hand cutting direction matches common lathe configurations and reduces setup errors when replacing tools. Installation follows standard mounting practices for PCLN-type holders: ensure correct seating of the CNMG insert, tighten the clamp screw to the recommended torque, and verify clearance before the first cut. Choose the Teknik Makina Turning Holder PCLNR 2525 for dependable turning performance and contact METAV Werkzeuge for personalized technical advice and support — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Information Designation: Turning Holder Brand: Teknik Makina SKU: P132TM For indexable inserts: CNMG 1204 ISO designation: PCLNR 2525 Overall length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Cutting angle: 95° Cutting direction: right Clamping screw thread: M12 GTIN: 4061905149832 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder PCLNR 2525 from Teknik Makina? The Turning Holder PCLNR 2525 is designed for CNMG 1204 indexable inserts; use inserts sized CNMG 1204 and follow the insert manufacturer’s recommendations for grade and geometry to match the machining task. Can the Teknik Makina Turning Holder PCLNR 2525 be used on CNC lathes? Yes, the Turning Holder PCLNR 2525 is suitable for CNC lathes and manual lathes alike; its 25 × 25 mm shank and standard PCLNR mounting make it compatible with common tool posts and turret systems. How is the CNMG insert secured in the Turning Holder PCLNR 2525? The CNMG 1204 insert is clamped using the holder’s M12 clamping screw; ensure the insert sits flush in the pocket and tighten the screw to the recommended torque to achieve secure, vibration-resistant clamping. Who can provide technical support or further compatibility advice for the Turning Holder PCLNR 2525? METAV Werkzeuge offers expert consultation for the Turning Holder PCLNR 2525 and other Teknik Makina tools — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored assistance. 95° PCLNR 2525 Turning Holder for CNMG 1204, 150mm - Teknik Makina
150mm PDJN for DNMG Indexable Inserts, 93° cutting angle, right-hand, PDJNR 2525 - Teknik Makina
Turning Holder PDJNR 2525 for DNMG 1506 inserts by Teknik Makina The Turning Holder is a right-hand toolholder designed for machining with DNMG 1506 indexable inserts, offering internal coolant for stable chip evacuation and precise turning operations. Turning Holder PDJNR 2525 for DNMG 1506 inserts Right-hand orientation with 93° cutting angle Internal coolant for improved chip control 150 mm overall length with 32 mm head width 25 x 25 mm shank for secure clamping Robust construction for steady turning performance This toolholder combines a compact form with durable design elements to ensure consistent results in turning applications. The PDJNR 2525 geometry provides a secure seat for DNMG 1506 indexable inserts, while the 25 x 25 mm shank reduces vibration and improves tool life. One clear advantage is the stable clamping, which translates into improved surface finish and reduced rework for precision parts. Improved chip control and coolant support for longer cycles Engineered with internal coolant, the holder enhances chip evacuation directly at the cutting edge to prevent built-up edge and overheating. The 93° cutting angle and right-hand orientation focus cutting forces to enable predictable tool behavior. For operators this means fewer interruptions for cleaning and more uninterrupted machining time, particularly beneficial on medium-duty turning tasks. Clear compatibility and easy integration in tooling setups Focused on compatibility, the insert seat accepts DNMG 1506 indexable inserts and follows the ISO designation PDJNR 2525, making the unit straightforward to integrate into existing tool turrets and toolrooms. The 150 mm overall length and 32 mm head width balance reach and rigidity, allowing use on various lathes while maintaining accessibility to typical workpiece geometries. Who benefits and where the holder excels Workshops producing turned components with medium to high repeatability gain from the holder’s balance of rigidity and coolant support. The product suits machinists and small to medium batch production environments seeking predictable tool life and consistent part quality. For tailored application advice or assembly recommendations, professional support is available from the dealer network. Strong recommendation: Choose Teknik Makina toolholders for demanding turning tasks and contact METAV Werkzeuge for expert advice at info@metav-werkzeuge.com or +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical specifications Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: P112TM For indexable inserts: DNMG 1506 Compatible inserts: DNMG 1506 Overall length: 150 mm Weight: 0.73 kg Internal coolant: Yes ISO designation: PDJNR 2525 Secondary designation: M15 Width: 25 mm Height: 25 mm Cutting head width: 32 mm Cutting angle: 93° Cutting direction: Right GTIN: 4061905149764 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed for DNMG 1506 indexable inserts; the ISO seat PDJNR 2525 ensures secure mounting and correct rake and clearance for standard DNMG formats. Does the Turning Holder support coolant-through operation? Yes, the Turning Holder includes internal coolant to guide coolant to the cutting edge, improving chip control and reducing temperatures during continuous turning cycles. What machining direction is the Teknik Makina Turning Holder intended for? The Teknik Makina Turning Holder is specified for right-hand cutting, with a 93° cutting angle optimized for conventional turning setups. How can I get technical advice or confirm suitability for my lathe? If unsure whether the Turning Holder fits your requirements, METAV Werkzeuge offers competent consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support. 150mm Turning Holder PDJN for DNMG Indexable Inserts, 93° Cutting Angle, Right-Hand, PDJNR 2525 - Teknik Makina
150mm PDJN for DNMG Indexable Inserts, 93° left, PDJNL 2525 - Teknik Makina
Turning Holder (Klemmhalter) by Teknik Makina Turning Holder (Klemmhalter) for secure mounting of DNMG indexable inserts, designed for precise left-hand turning operations in professional workshops. Turning Holder PDJNL 2525 by Teknik Makina Compatible with DNMG 1506 indexable inserts Overall length 150 mm for enhanced rigidity Left-hand cutting with 93° cutting angle Internal coolant for improved chip removal High-precision support for reliable turning results The Turning Holder (Klemmhalter) is engineered to deliver consistent stability during turning tasks. With its ISO designation PDJNL 2525, the toolholder offers a square shank interface that provides reliable clamping and reduced vibration. This stability translates into improved Surface Finish and longer Insert Life when paired with DNMG 1506 indexable inserts, making it suitable for demanding production environments where repeatable accuracy is required. Robust geometry that simplifies setup and handling Designed with a 150 mm Overall Length and a compact Cross-Section, this holder balances reach and stiffness to support a broad range of turning operations. The 32 mm Cutting Head Width and 25 x 25 mm shank dimensions facilitate easy toolpost installation and secure fixation. Users benefit from reduced setup time and a more predictable machining process thanks to the holder’s straightforward mechanical interface. Better chip control and tool life with internal coolant Equipped with Internal Coolant, the holder helps direct cutting fluid close to the cutting edge, which enhances Cooling and Chip Evacuation. For operators unfamiliar with this feature: internal coolant supplies lubricant and coolant through the holder directly to the insert edge, lowering Cutting Temperatures and helping to extend Insert Lifetime. This characteristic is especially useful in continuous production or when working with tougher materials that generate heat. Who benefits from this tool and where to use it Professional machinists and toolroom technicians will find this Turning Holder particularly suitable for medium to heavy-duty turning on lathes that require left-hand cutting. The holder is optimized for DNMG 1506 Inserts—a common, versatile insert geometry—so workshops seeking a reliable, easily serviceable toolholder will find it an efficient choice. For bespoke setups or questions about compatibility, tailored advice is available from METAV Werkzeuge. Secure precise turning performance with Teknik Makina’s Turning Holder — for personalised selection and technical support contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: P124TM GTIN: 4061905149795 Passende Wendeplatten: DNMG 1506 ISO Bezeichnung: PDJNL 2525 Bezeichnung 2: M15 Gesamtlänge: 150 mm Breite: 25 mm Höhe: 25 mm Schneidekopf Breite: 32 mm Schneidenhöhe: 38 mm Schnittwinkel: 93° Schnittrichtung: Left Mit Innenkühlung: Yes Gewicht: 0.73 kg Zustand: New Verfügbarkeit: In Stock Hersteller / Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Verantwortliche Person / Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and which versions are compatible? The Turning Holder (Klemmhalter) from Teknik Makina is compatible with DNMG 1506 indexable inserts; this holder is designed for the negative rhombic DNMG geometry commonly used for general turning, enabling straightforward fitment and repeatable clamping. Does the Teknik Makina Turning Holder support coolant-through operation? Yes, the Teknik Makina Turning Holder (Klemmhalter) features internal coolant capability, which directs coolant close to the cutting edge to improve chip evacuation and lower cutting temperatures during machining. Is the PDJNL 2525 designation important when selecting a holder? The PDJNL 2525 ISO designation of this Turning Holder (Klemmhalter) indicates the shank and clamp style; choosing a holder with the correct ISO designation helps ensure secure mounting and compatibility with your toolpost and lathe setup. Who can advise if the Turning Holder from Teknik Makina suits my application? If you are unsure whether the Teknik Makina Turning Holder (Klemmhalter) meets your requirements, METAV Werkzeuge provides expert guidance and can assist with technical details — contact info@metav-werkzeuge.com or call +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#P124TM","sku":"P124TM","mpn":"PDJNL 2525","gtin13":"4061905149795","name":"150mm Turning Holder PDJN for DNMG Indexable Inserts, 93° Left, PDJNL 2525 - Teknik Makina","description":"Turning holder for DNMG 1506 indexable inserts; 150 mm overall length, 25 mm width, 25 mm height, 32 mm cutting head width, internal coolant, 93° cutting angle.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/08/8d/e2/62/62e28d080f56dbb4de4e1288/p119tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Suitable Inserts","value":"DNMG 1506"},{"@type":"PropertyValue","name":"Overall Length","value":"150 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.73 kg"},{"@type":"PropertyValue","name":"Internal Coolant","value":"yes"},{"@type":"PropertyValue","name":"ISO Designation","value":"PDJNL 2525"},{"@type":"PropertyValue","name":"Shank Designation","value":"M15"},{"@type":"PropertyValue","name":"Width","value":"25 mm"},{"@type":"PropertyValue","name":"Height","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"left"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"DNMG 1506 indexable inserts fit this holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"The overall length is 150 mm."}},{"@type":"Question","name":"Does the holder support internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder features internal coolant."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The cutting angle is 93°."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation PDJNL 2525."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Allround Turning Operations"},{"@type":"Thing","name":"Requires DNMG 1506 Inserts"}],"mentions":[{"@type":"Thing","name":"PDJNL 2525"},{"@type":"Thing","name":"Internal Coolant"},{"@type":"Thing","name":"M15 Shank"}]}]}
150mm PDJN for DNMG Indexable Inserts, PDJNR 2525, 93°, with internal coolant - Teknik Makina
Turning Holder PDJN for DNMG Indexable Inserts by Teknik Makina The Turning Holder PDJN for DNMG Indexable Inserts is a precision clamping tool designed to secure DNMG 1506 indexable inserts for reliable turning operations in metalworking and industrial workshops. Turning Holder PDJNR 2525 for DNMG 1506 inserts Overall length 150 mm for stable machining Internal coolant for improved chip evacuation 93° cutting angle with right-hand orientation 25 x 25 mm shank with 32 mm cutting head width Precision clamping for consistent machining results The Turning Holder PDJNR 2525 delivers repeatable geometry and machining stability by combining a compact shank with a purpose‑built head for DNMG 1506 inserts. The PDJNR 2525 design ensures secure seating of indexable inserts and reduces vibration, which directly improves surface finish and extends insert life. Operators benefit from predictable tool behaviour during turning, reducing rework and increasing process reliability. Coolant-fed design improves chip control and tool life Equipped with Internal Coolant, this clamping holder channels coolant to the cutting zone to aid chip evacuation and thermal control. By keeping the cutting edge cooler and clearing chips efficiently, the holder supports longer insert life and more consistent cutting forces. The internal coolant feature is particularly advantageous for medium- to high‑speed turning where heat and built-up edge can affect tolerances. Built for workshop versatility and easy setup With a 150 mm overall length and a 25 x 25 mm shank, the holder balances reach and rigidity for diverse shop tasks. The 32 mm cutting head width and 93° cutting angle (right-hand orientation) make the tool suitable for facing and general turning profiles where DNMG 1506 inserts are specified. Quick clamping using the TH825 clamping screw and supplied Allen key helps minimise setup time between tool changes. Compatible components and maintenance guidance Compatibility with DNMG 1506 indexable inserts and the ISO designation PDJNR 2525 simplifies tool selection and inventory management. The holder includes standard accessories such as the TS-4 roll pin and works with the TL4B knee lever for secure fastening. Regular inspection of clamping surfaces and coolant channels preserves performance; blocked coolant passages should be cleared to maintain effective cooling. We recommend Teknik Makina’s Turning Holder PDJNR 2525 for workshops seeking precise, coolant-assisted turning — for tailored advice and support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Turning Holder Marke: Teknik Makina SKU: AP112TM Suitable Inserts: DNMG 1506 ISO Designation: PDJNR 2525 Alternative designation / Part: M15-IKG1/8 Overall length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting head width: 32 mm Cutting height: 40 mm Cutting angle: 93° Cutting direction: Right Clamping screw: TH825 Knee lever: TL4B Roll pin: TS-4 Allen key: 3 Allen Internal coolant: Yes Tool plate: TA014-1 Weight: 0.759 kg GTIN: 4061905150241 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder PDJNR 2525 from Teknik Makina is designed for DNMG 1506 indexable inserts and provides the correct seating and clamping geometry for reliable turning operations with that insert type. Does the Turning Holder have coolant capability? Yes, the Teknik Makina Turning Holder PDJNR 2525 features Internal Coolant to support chip evacuation and thermal control during medium- to high‑speed turning. What are the main dimensions of the Teknik Makina Turning Holder? Key dimensions for the Turning Holder PDJNR 2525 include an overall length of 150 mm, a 25 x 25 mm shank, and a 32 mm cutting head width, which together balance reach and rigidity. Who can I contact for technical advice about the Turning Holder? For technical guidance on the Turning Holder PDJNR 2525 by Teknik Makina, METAV Werkzeuge offers expert consultation — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 93° PDJNR 2525 Turning Holder for DNMG 1506, 150mm, Internal Coolant - Teknik Makina
150mm PSSN Turning Holder for SNMG 1204 Inserts, 45° - Teknik Makina
Turning Holder (Klemmhalter) — PSSNR 2525 for SNMG 1204 by Teknik Makina The Turning Holder (Klemmhalter) is a right-hand toolholder engineered for SNMG 1204 indexable inserts, offering a 45° cutting angle and 150 mm overall length for stable, precise turning operations. PSSNR 2525 ISO designation for secure clamping Compatible with SNMG 1204 indexable inserts 150 mm overall length for stable cutting reach 45° cutting angle for efficient right-hand turning 25 × 25 mm shank: compact, rigid toolholder Precision and stability that reduce rework and cycle time Built to support consistent machining results, the PSSNR 2525 configuration ensures reliable insert retention and repeatable positioning. The 45° rake geometry improves chip flow and reduces cutting forces, which translates into lower vibration and more accurate diameters. As a result, operators achieve tighter tolerances with fewer passes, making this holder especially suitable for production turning where repeatability and surface finish are critical. Optimised for SNMG 1204 indexable inserts to simplify tooling By design, the holder accepts SNMG 1204 indexable inserts, a common size that balances robustness and versatility. SNMG inserts feature four cutting edges per insert, allowing quick indexing when one edge wears. This reduces downtime compared with solid-carbide tooling and lowers operating costs per cutting edge. For users new to indexable tooling, an SNMG insert is a replaceable carbide plate that seats into the pocket of the holder to provide the actual cutting edge. Compact dimensions that increase rigidity and tool life The holder’s 25 mm by 25 mm shank and 32 mm cutting-head width deliver high rigidity at the cutting point, decreasing deflection under load. With an overall length of 150 mm and a mass of approximately 0.742 kg, the toolholder maintains a favourable stiffness-to-reach ratio that helps prevent chatter and prolongs insert life. These dimensional choices are deliberate: greater rigidity means improved surface quality and longer intervals between insert changes. Made for professional workshops and production environments Workshops and small production lines benefit from a toolholder that combines compatibility, stability and simple handling. The design supports efficient tool setup and repeatable mounting, which helps reduce setup time and improves workflow. If you require application-specific guidance—for example feed/speed recommendations or holder orientation—METAV Werkzeuge provides competent technical support to help integrate the holder into your machining process. Strong recommendation: For reliable SNMG 1204 turning applications, choose the Teknik Makina Turning Holder and contact METAV Werkzeuge for tailored technical advice — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Specifications Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: P172TM For Inserts: SNMG 1204 Suitable Inserts: SNMG 1204 ISO Designation: PSSNR 2525 Overall Length: 150 mm Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 45° Cutting Direction: Right Weight: 0.742 kg Condition: new Availability: in Stock GTIN: 4061905052576 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and what is the benefit? The Turning Holder from Teknik Makina is designed for SNMG 1204 indexable inserts; using these inserts gives four cutting edges per insert and fast indexing, which reduces machine downtime and cost per edge. Can the Teknik Makina Turning Holder be used for heavy-duty turning? The Teknik Makina Turning Holder, with a 25 × 25 mm shank and 150 mm length, offers increased rigidity for many demanding turning tasks; for extremely heavy cuts, consider matching insert grade and machine power accordingly. How does the 45° cutting angle affect machining with the Klemmhalter? A 45° cutting angle on the Klemmhalter improves chip evacuation and lowers cutting forces, resulting in smoother surfaces and less tool deflection during right-hand turning. Who can provide technical setup help for the Turning Holder (Klemmhalter)? METAV Werkzeuge offers professional advice for integrating the Turning Holder into your workflow; contact Metav for assistance with speeds, feeds and optimal insert selection. 150mm Turning Holder PSSN for SNMG 1204 Inserts, 45°, PSSNR 2525 - Teknik Makina
150mm PWLN Turning Holder for WNMG 0604 inserts, 95° cutting angle, 25×25 mm, PWLNR 2525 - Teknik Makina
Turning Holder (PWLN for WNMG Indexable Inserts) by Teknik Makina The Turning Holder is a precision toolholder designed for turning operations with WNMG 0604 indexable inserts, providing stable clamping and predictable cutting performance. Turning Holder for WNMG 0604 inserts 150 mm total length for extended reach ISO PWLNR 2525 compatible 25 × 25 mm shank for secure clamping 95° cutting angle, right-hand orientation Precision and repeatability for demanding turning tasks This toolholder is engineered to deliver consistent machining results when used with WNMG 0604 inserts. The geometry ensures that the insert sits at the correct rake and clearance angles, so engagement with the workpiece is predictable and stable. For shops that prioritise reproducible surface finish and dimensional accuracy, the holder’s compatibility with the PWLNR 2525 ISO profile reduces setup time and minimizes indexable insert adjustments, allowing faster changeovers and fewer trial cuts. Stable clamping and vibration control for cleaner cuts With a 25 × 25 mm shank and a cutting-head width of 32 mm, the holder provides a rigid interface between machine and insert. The 150 mm overall length balances reach and stiffness to keep chatter low on most standard lathes. A stable clamping system reduces micro-movements during cutting, which helps extend insert life and improves surface quality. This mechanical reliability is particularly beneficial when machining interrupted cuts or heavier feed conditions. Clear guidance for application and compatibility The holder is set up for right-hand turning operations with a 95° cutting angle and is intended specifically for WNMG 0604 indexable inserts. For users less familiar with insert nomenclature: WNMG 0604 denotes a rhombic-shaped carbide insert, 6 mm inscribed circle with a 0.4 mm nose radius, commonly used for general turning and finishing work. Using the correct insert type with this holder ensures correct seat contact and optimal cutting performance without modification. Practical support and workshop integration Manufactured by Teknik Makina and supplied new and in stock, this holder integrates into typical lathe toolposts and clamping systems that accept a 25 mm square shank. If there is uncertainty about suitability for your machine or the intended operation, METAV Werkzeuge offers competent technical advice and can assist with selection and setup. Their team can help match insert grades, cutting parameters and fixturing to your specific application, ensuring the holder performs as expected on your parts. For precision turning applications that demand stable clamping and quick insert changes, choose the Teknik Makina Turning Holder — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Name: Turning Holder (PWLN for WNMG Indexable Inserts) Manufacturer: Teknik Makina SKU: P161TM For Indexable Inserts: WNMG 0604 Compatible Inserts: WNMG 0604 Total Length: 150 mm Weight: 0.758 kg ISO Designation: PWLNR 2525 Secondary Designation: M06 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 95° Cutting Direction: Right GTIN: 4061905052460 Condition: new Availability: in Stock Manufacturer or Manufacturer for English: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person or Responsible Person for English: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Teknik Makina Turning Holder is designed for WNMG 0604 indexable inserts; using WNMG 0604 ensures correct seat engagement and the expected cutting geometry with the PWLN-style pocket. Can this holder be used for left-hand turning? This specific Turning Holder is manufactured for right-hand cutting direction with a 95° cutting angle; left-hand operations would require a correspondingly oriented holder. What shank size and length does the Teknik Makina Turning Holder offer? The holder features a 25 × 25 mm shank and a total length of 150 mm, balancing reach and rigidity for standard lathe toolpost setups. Is technical support available for setup and insert selection? Yes, METAV Werkzeuge provides expert consultation for the Teknik Makina Turning Holder; contact info@metav-werkzeuge.com or call +49 2822 7131930 for application-specific advice. 95° PWLN Turning Holder for WNMG 0604, 150mm, 25×25 mm, PWLNR 2525 - Teknik Makina
150mm PWLN Turning Holder for WNMG 0604, 95° left - Teknik Makina
Introducing the Turning Holder PWLN for WNMG Indexable Inserts by Teknik Makina The Turning Holder PWLN for WNMG Indexable Inserts secures WNMG 0604 inserts for precision turning tasks across workshops and production environments. PWLNL 2525 ISO Holder design Compatible with WNMG 0604 inserts 150 mm overall length for extended reach 25 x 25 mm shank for stable rigidity 95° cutting angle, left-hand orientation Secure Seating for Accurate Turning The PWLNL 2525 geometry provides a reliable clamping interface for WNMG 0604 indexable inserts, ensuring consistent seating and repeatable results. By keeping the Insert firmly positioned, the Holder reduces micro-movement during cuts, which directly improves Dimension Accuracy and surface quality. This design is particularly advantageous when repeatability and close tolerances are required in serial turning operations. Stable Shank and Reach for Reduced Vibration With a 25 x 25 mm shank and a 150 mm overall length, the toolholder balances reach and stiffness to minimise Vibration while machining. The stable shank cross-section helps maintain tool rigidity, so each cutting pass remains consistent and tool life is supported by lower dynamic loads. The measured Shank dimensions are beneficial for setups that need extended reach without sacrificing stability. Optimised Geometry for Specific Turning Tasks A 95° cutting angle combined with left-hand orientation enables favourable chip flow and clearance for certain turning strategies. For users unfamiliar with indexable inserts: WNMG 0604 denotes an indexable turning insert with a rhombic shape and a 06 size, offering multiple cutting edges that can be rotated or replaced individually. The left-hand configuration suits operations where tool approach and machine spindle direction require that orientation, improving operator planning and fixture layout. Designed for Workshops and Production Environments Teknik Makina engineered this Holder to meet demands of job shops and production lines that process steel and alloy components using indexable tooling. The compact Schneidkopf width of 32 mm and Schneidenhöhe of 30 mm provide compatibility with common toolpost setups and robust engagement during interrupted cuts. Maintenance is straightforward thanks to the standardised ISO designation and readily available replacement inserts. For demanding turning applications, rely on Teknik Makina’s Turning Holder PWLN for WNMG Indexable Inserts — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications for Confident Selection Bezeichnung: Turning Holder Brand: Teknik Makina SKU: P166TM For Indexable Inserts: WNMG 0604 Compatible Inserts: WNMG 0604 Overall Length: 150 mm Weight: 0.758 kg ISO Designation: PWLNL 2525 Secondary Designation: M06 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Height: 30 mm Cutting Direction: left Cutting Angle: 95° GTIN: 4061905150005 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed for WNMG 0604 indexable inserts, and this compatibility ensures straightforward replacement and consistent cutting geometry when using the specified inserts. Is the Turning Holder PWLN suitable for left-hand operations? Yes, the Turning Holder PWLN for WNMG inserts is manufactured with a left-hand cutting orientation, making it suitable for setups and turning strategies that require a left-hand approach. What are the critical dimensions I should check before ordering the Turning Holder? Check the overall length of 150 mm and the shank cross-section of 25 x 25 mm for machine toolholder clearance; these dimensions for the Turning Holder by Teknik Makina determine fit and rigidity in your turret or toolpost. Can METAV Werkzeuge help with technical questions about the Turning Holder? METAV Werkzeuge offers competent advice on the Turning Holder PWLN for WNMG Indexable Inserts; contact them at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 for tailored support. 150mm PWLN Turning Holder for WNMG 0604, 95° Left - Teknik Makina
Precision coolant delivery for demanding turning operations
Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.
How they work and where they help most
Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.
Key facts
| characteristic | detail |
|---|---|
| category | tool holders with internal coolant |
| common synonyms | internal coolant toolholders; coolant-through tool holders |
| typical application | turning, heavy machining, internal bore finishing |
| coolant routing | internal channels and boreholes delivering coolant to the insert seat |
| key technical effect | direct cooling at the cutting edge, improved chip evacuation, reduced thermal load |
| comparison | standard holders use external nozzles; internal coolant holders route coolant through the shank |
Measurable benefits for production
- Direct coolant feed reduces the thermal stress on the insert, extending tool life.
- Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
- More consistent cooling helps achieve better surface finish and dimensional stability.
- Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.
Metav: precision supply and industrial competence
Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.
In short
Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.
FAQ
When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.
Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.
What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.
How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com