High-precision clamping holders with internal coolant for extended tool life
Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.
150mm Precision Toolholder SVJCR 2525 M11 For VCMT 1103 Indexable Inserts Right-Hand Cutting, 93° - Teknik Makina
Take advantage of secure clamping, ISO-standard compatibility and a compact 150 mm design to keep turning operations predictable and productive; order directly via Metav Werkzeuge or consult the technical team for tailored advice. Teknik Makina Clamping Toolholder SVJC (SVJCR 2525) – for VCMT 1103 inserts, right-hand The SVJC for VCMT Indexable Inserts is a robust clamping toolholder designed for right-hand turning operations with VCMT 1103 indexable inserts. SVJCR 2525 ISO designation For VCMT 1103 indexable inserts Right-hand turning orientation Robust 150 mm overall length Consistent turning performance through ISO conformity The SVJCR 2525 designation signals a familiar and widely accepted interface for industrial turning applications. With an overall length of 150 mm and a compact cutting head width of 32 mm, this clamping toolholder is engineered to deliver repeatable positioning and stable chip control in serial production. The combination of a defined ISO shank and standard insert form ensures effortless replacement of VCMT 1103 plates and reduces changeover time, which supports predictable cycle times on multi-shift lathes. Secure clamping and mechanical reliability Designed for reliable insert retention, the holder offers a secure clamping concept that complements the 40 mm cutting height and a 93° cutting angle to maintain cutting geometry under load. The unit’s modest mass of 0.738 kg contributes to dynamic stability without excessive inertial loads on tool turrets. The M11 bore/thread provides the interface required for common clamping screws, ensuring a firm mechanical connection between holder and insert. These technical characteristics reduce the risk of chatter and contribute directly to surface finish consistency. Practical workshop design that speeds up set-up A narrow holder width of 25 mm and a holder height of 25 mm allow installation in compact tool turrets and on smaller toolposts while retaining sufficient rigidity for medium duty turning. Compatibility with VCMT 1103 indexable inserts simplifies inventory management for workshops running standard carbide plates. By using standard insert geometry and an ISO-aligned holder, maintenance routines are streamlined and spare-part lists are shortened, which supports continuous production and lowers logistical complexity. Clear selection and installation guidance for machinists This clamping toolholder is intended for right-hand turning applications and pairs specifically with VCMT 1103 plates; verify turret clearance and insert orientation before mounting. The SVJC clamping toolholder is suitable for shops seeking a standardised holder that integrates into existing tool families without requiring special adaptors. For efficient installation, ensure the correct M11 fixing hardware is used and that the insert seat is free of chips to guarantee optimal clamping force and repeatable geometry. For bespoke technical advice and reliable supply from Emmerich, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 regarding the Teknik Makina SVJC clamping toolholder (SKU D243TM) Technical Data Article number: D243TM Brand: Teknik Makina ISO designation: SVJCR 2525 For inserts: VCMT 1103 Facts Overall length: 150 mm Weight: 0.738 kg Cutting head width: 32 mm Holder height: 25 mm Holder width: 25 mm Cutting height: 40 mm Cutting angle: 93° Direction of cut: right Special features Compatible with VCMT 1103 indexable inserts Bore/thread: M11 Suitable for right-hand turning operations Compact design for reduced turret interference FAQ Which indexable inserts fit this toolholder? The SVJC clamping toolholder is designed for VCMT 1103 indexable inserts and accepts the standard insert geometry associated with that designation. Is the holder suitable for left-hand turning? This holder is specified for right‑hand turning operations; a left‑hand variant would be required for left‑hand machining. What is the ISO designation and why is it important? The toolholder carries the SVJCR 2525 ISO designation, which ensures compatibility with standardised turret mounts and predictable insert seating for straightforward replacement. What are the key dimensions to check before mounting? Relevant dimensions include overall length 150 mm, holder height 25 mm, and cutting head width 32 mm; verify turret clearance accordingly. Which fixing thread is used for the clamping screw? The holder uses an M11 bore/thread for the clamping screw interface as specified. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm PWLN For WNMG Indexable Inserts PWLNR 2525 M06 For WNMG 0604 Innenkühlung Rechtsschneidend 95° - Teknik Makina
Benefit from the combination of secure clamping for WNMG 0604 inserts, a precise 95° cutting angle and compact dimensions to keep turning operations reliable and efficient. Order the Klemmhalter directly via Metav Werkzeuge or consult the specialists for technical advice. Klemmhalter — PWLN holder for WNMG indexable inserts by Teknik Cutting Tools, right‑hand, 95° The Klemmhalter is a right‑hand external turning holder designed for WNMG 0604 indexable inserts, offering a compact solution for general turning and finishing operations. Secure clamp for WNMG 0604 inserts 95° cutting angle for versatile turning Compact 150 mm overall length ISO PWLNR 2525 designation Faster set-up and assured insert compatibility The holder is engineered to reduce set‑up time through a straightforward clamping concept compatible with WNMG 0604 inserts and the ISO designation PWLNR 2525. The integrated clamping interface with M06 fastening enables quick insert changes and repeatable seating, which in turn lowers downtime and improves process consistency. For shops migrating to standardised tooling, this toolholder simplifies inventory while maintaining secure clamping and predictable cutting geometry. Rigidity and geometry that improve surface quality Built with a focus on stability, the toolholder’s geometry delivers a reliable support zone at the cutting edge. The 95° cutting angle produces a balanced force distribution during external turning, helping to reduce chatter and extend insert life. With a cutting height of 30 mm, a head width of 32 mm and a holder height of 25 mm, the design promotes consistent chip control and surface finish, particularly in finishing passes where dimensional repeatability is essential. Compact form factor for versatile mounting and access The modest overall length of 150 mm and a mass of 0.758 kg provide a good compromise between reach and rigidity. The right‑hand orientation and standard shank dimensions make the holder suitable for many toolposts and turrets without extensive modification. This compact footprint supports easier access in tight setups and facilitates faster tool exchanges during batch production, helping to keep cycle times down in routine operations. Practical benefits for everyday workshop use In daily use the holder delivers measurable benefits: quicker tool changes, consistent cutting geometry and fewer re‑set operations. The combination of standard insert compatibility and robust clamping contributes to reduced tooling complexity and predictable machining outcomes. For manufacturers seeking straightforward, dependable turning solutions, this holder offers a pragmatic balance between performance and ease of use. For secure clamping with the Teknik Cutting Tools PWLN holder and advice on application or ordering, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: P161TM Manufacturer: Teknik Makina Type: PWLN for WNMG indexable inserts ISO designation: PWLNR 2525 ECLASS: 21181004 Cutting direction: right Facts Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Cutting angle: 95° Weight: 0.758 kg Special features Compatible with WNMG 0604 inserts Clamping thread / fastening: M06 Right‑hand external turning holder Compact design for standard turrets and toolposts FAQ Which inserts fit this holder? The holder accepts WNMG 0604 indexable inserts; compatibility is based on the PWLN interface and the ISO designation PWLNR 2525. Is the holder right‑hand or left‑hand? This is a right‑hand external turning holder, suitable for standard right‑hand turning operations. What are the key dimensions to check for mounting? Important dimensions are overall length 150 mm, holder height 25 mm, head width 32 mm and cutting height 30 mm for verifying fit in the turret or toolpost. What fastening is used for the clamp? The clamping screw designation provided is M06, which secures the insert firmly in the pocket. What is the SKU and who supplies the tool? The SKU is P161TM and the tool is supplied by Teknik Cutting Tools, distributed via Metav Werkzeuge for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm PWLN for WNMG Indexable Inserts PWLNR 2525 M06-IKG1/8 For WNMG 0604 Innenkühlung Rechtsschneidend 95° - Teknik Makina
Take advantage of a robust combination of reliable clamping, compact dimensions and internal coolant delivery to maintain consistent turning results with indexable WNMG inserts; order through Metav Werkzeuge or consult their specialists for machining guidance and supply. Klemmhalter — PWLN for WNMG indexable inserts, right‑hand, internal coolant by Teknik Makina Klemmhalter is a right‑hand turning tool holder designed for secure use with WNMG 0604 indexable inserts in medium‑duty turning applications, offering internal coolant and an ISO PWLNR 2525 form for consistent set‑up. Right‑hand turning holder for WNMG inserts Internal coolant for stable chip evacuation 95° cutting angle for robust depth control ISO PWLNR 2525 form, 150 mm overall length Consistent clamping for repeatable turning quality The tool holder delivers repeatable clamping through a proven clamping system compatible with WNMG 0604 insert geometry, reducing variability between setups. With an effective 95° cutting angle and a cutting height of 30 mm, the design supports stable engagement and predictable cutting forces, which helps to lower scrap rates and maintain surface finish across batches. The ISO designation PWLNR 2525 ensures straightforward replacement and integration in standard tool lists. Improved machining performance via controlled coolant and rigidity Internal coolant routing is incorporated to enhance chip control and cooling at the cutting edge; this lowers tool wear and contributes to longer insert life during sustained cutting. The holder’s head width of 32 mm and body dimensions provide stiffness while keeping the overall length at 150 mm for good reach into common setups. Measured mass (0.756 kg) adds inertia to resist vibration without excessive overhang, supporting higher material removal rates and efficient cycle times in production environments. Practical connection and service features that reduce downtime The clamping arrangement is maintained with standard components for quick service: clamping screw TH617, U‑plate TA021, dowel TS3 and knee lever TL3 are specified for repeatable assembly. Adjustment and maintenance require only a 2.5 Allen key, enabling fast insert changes and minimal workshop intervention. Together these elements shorten setup times and simplify changeovers, delivering measurable productivity benefits on the shop floor. For application advice or to secure Teknik Cutting Tools’ PWLN clamping holder (SKU AP161TM) directly from Metav Werkzeuge — contact the Metav technical team in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for fast supply and machining recommendations Technical data SKU: AP161TM Brand: Teknik Makina Type: PWLN for WNMG indexable inserts Height: 25 mm Head width: 32 mm Body width: 25 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.756 kg Cutting angle: 95° Compatible inserts: WNMG 0604 Internal coolant: yes Clamping screw: TH617 U‑plate: TA021 Dowel: TS3 Knee lever: TL3 Allen key: 2.5 (required) Bar designation: M06-IKG1/8 ISO designation: PWLNR 2525 Cutting direction: right FAQ Which insert size is specified for this holder? The holder is specified for WNMG 0604 inserts and is manufactured to the ISO form PWLNR 2525, ensuring correct seat geometry for that insert type. Does the holder support internal coolant delivery? Yes, the Teknik Makina PWLN clamping holder (SKU AP161TM) features internal coolant, improving chip evacuation and tool life under continuous turning. What is the cutting direction and typical application? This is a right‑hand turning holder intended for conventional external turning operations with indexable WNMG inserts in general machining. Which fastenings and tools are required for insert changes? Insert clamping uses the TH617 clamping screw with the supplied U‑plate TA021; assembly and insert changes can be performed with a 2.5 Allen key and the standard dowel TS3 and knee lever TL3 for secure locating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm PWLNR 2525 PWLN for WNMG Wendeplatten, 95° Schnittwinkel, M08-IKG1/8, For WNMG 0804 Wendeplatten, Innenkühlung, Rechtsschneidend - Teknik Makina
Combine robust clamping, internal coolant and precise cutting geometry to secure stable turning performance; the right‑hand PWLN holder ensures reliable seating of WNMG 0804 inserts and straightforward integration via Metav Werkzeuge for machining continuity and procurement support. PWLN for WNMG Indexable Inserts — PWLNR 2525 toolholder (right‑hand, internal coolant) The PWLN for WNMG Indexable Inserts is a right‑hand turning toolholder designed for WNMG 0804 inserts, offering internal coolant and a compact 25 × 25 mm shank for consistent lathe mounting Right-hand toolholder for turning applications Fits WNMG 0804 indexable inserts Internal coolant for controlled lubrication Robust 25 × 25 mm shank, 150 mm overall length Reliable clamping for consistent turning results A stable clamp interface is central to repeatable turning. The toolholder, specified as PWLNR 2525, combines a 25 × 25 mm shank with a sturdy clamp screw (TH821) to secure WNMG inserts with minimal radial runout. This translates into consistent cutting forces and reduced vibration, which helps maintain tolerances over batch runs; the moderate mass (0.782 kg) delivers good inertial damping without adding excessive load on tool posts. Optimised chip control and coolant delivery Built‑in internal coolant channels enable targeted coolant delivery directly to the cutting zone, improving chip evacuation and thermal management. For operations requiring sustained contact with the workpiece, this feature reduces heat build‑up at the cutting edge and can extend insert life. Controlled lubrication also contributes to a cleaner surface finish and lowers the risk of built‑up edge when machining challenging materials with indexable inserts. Precision geometry for dependable right‑hand turning The holder’s 95° cutting angle and defined head geometry position WNMG 0804 inserts for predictable engagement in right‑hand turning. With a cutting height of 38 mm and a cutting‑head width of 32 mm, the assembly provides a balance between rigidity and accessibility at the tool tip. This geometry supports stable chip flow and predictable tool behaviour, which is particularly beneficial for repeatable facing and light to medium turning tasks. Straightforward assembly and maintenance on the shop floor Installation and routine upkeep are simplified by the included accessory interfaces: U‑plate TA020‑1, dowel TS‑4, lever TL4 and the matching 3‑Allen key. These parts enable rapid mounting and secure clamping of inserts without specialised jigs. The overall length of 150 mm offers a compact footprint while the standardised ISO designation aids compatibility checks when replacing holders or organising tooling inventories. Contact Metav Werkzeuge to discuss Teknik Cutting Tools’ right‑hand PWLN toolholder with internal coolant and confirm suitability for specific turning tasks — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: AP151TM Manufacturer: Teknik Makina Designation: PWLN for WNMG Indexable Inserts (PWLNR 2525) SKU: AP151TM Facts Shank: 25 × 25 mm Cutting head width: 32 mm Cutting height: 38 mm Overall length: 150 mm Weight: 0.782 kg Cutting angle: 95° Cutting direction: right‑hand Compatible inserts: WNMG 0804 Special features Internal coolant Clamp screw: TH821 U‑plate: TA020-1 Dowel: TS-4 Lever: TL4 Allen key: 3 Allen ISO designation: PWLNR 2525 Drill rod: M08-IKG1/8 FAQ What inserts are supported by this holder? The holder accepts WNMG 0804 indexable inserts; the toolholder is supplied in the PWLNR 2525 format for standard lathe tool posts. Is the coolant internal or external? This turning holder features internal coolant, which delivers lubrication directly to the cutting zone for improved chip control and thermal management. Which handedness does the toolholder have? The holder is configured for right‑hand cutting, matching common turning orientations for facing and external turning operations. What are the key mounting components supplied or required? Mounting and clamping use standard parts such as the TH821 clamp screw, U‑plate TA020‑1, dowel TS‑4 and lever TL4; a 3‑Allen key is specified for assembly. How does the holder geometry affect machining stability? The 95° cutting angle and compact head dimensions position the insert for stable engagement, promoting consistent cutting forces and repeatable surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm SDHC for DCMT Indexable Inserts, SDHCR 2525, 107.5° - Teknik Makina
Turning Holder SDHC for DCMT Indexable Inserts by Teknik Makina The Turning Holder SDHC for DCMT Indexable Inserts is a precision clamping solution for turning applications, designed to secure DCMT 11T3 indexable inserts for reliable metalcutting operations. Teknik Makina Turning Holder SDHCR 2525 for DCMT 11T3 Secure clamping with robust SDHC design 150 mm overall length for standard toolposts Right-hand cutting with 107.5° cutting angle Compact head width 32 mm for versatile access Durable clamping and consistent cutting performance Built for repeatable results, this Turning Holder features the SDHCR 2525 ISO design that delivers stable insert seating and reduced vibration. The holder’s construction supports consistent chip flow and improved surface finish, making it suitable for serial turning tasks. With a focus on repeatability, the design reduces setup times and minimises downtime, ensuring efficient machining across batches. Compatibility with DCMT 11T3 inserts for flexible tooling Engineered specifically for DCMT 11T3 indexable inserts, the holder enables quick insert changes and secure fixation. This compatibility simplifies tooling logistics and allows workshops to use a common insert family across multiple operations. The targeted fit helps maintain cutting geometry and prolongs insert life by ensuring correct seating and pressure distribution during cutting. Compact dimensions for better accessibility and tool life The holder’s compact head width of 32 mm and a tool body of 25 mm x 25 mm allow access to confined areas while maintaining rigidity. Reduced overhang and a 150 mm overall length lower bending moments and extend tool and insert life. For operations where reach and stiffness must be balanced, this design offers improved stability without sacrificing access to tight workpiece features. Designed for workshop reliability and simple integration Manufactured by Teknik Makina, the holder is built to integrate smoothly into standard toolposts and setups. The right-hand cutting orientation and a precise 107.5° cutting angle deliver predictable chip control and repeatable results on common turning materials. For maintenance and replacement planning, the clear ISO designation and robust mounting geometry simplify inventory and procurement. Choose Teknik Makina’s Turning Holder for dependable clamping of DCMT inserts — for expert advice or technical clarification contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications for reliable clamping Bezeichnung: Turning Holder Brand: Teknik Makina SKU: D252TM For Indexable Inserts: DCMT 11T3 Compatible Inserts: DCMT 11T3 Overall Length: 150 mm Weight: 0.738 kg ISO Designation: SDHCR 2525 Secondary Designation: M11 Width: 25 mm Height: 25 mm Cutting Head Width: 32 mm Cutting Direction: Right Cutting Angle: 107.5° GTIN: 4061905153495 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts does the Turning Holder from Teknik Makina accept? The Teknik Makina Turning Holder is designed to accept DCMT 11T3 indexable inserts, ensuring a secure fit and correct cutting geometry for standard turning operations. Is the Turning Holder SDHCR 2525 suitable for right-hand turning only? Yes, the Teknik Makina Turning Holder SDHCR 2525 shown here is specified for right-hand cutting, which aligns with common turning setups that require that orientation. Can the Turning Holder be used in compact toolposts and confined spaces? The compact dimensions and 32 mm cutting head width of the Teknik Makina Turning Holder make it well suited for installations where accessibility and rigidity are both required. Who can I contact for technical questions about the Turning Holder? For technical questions about the Teknik Makina Turning Holder, METAV Werkzeuge offers expert advice — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 150mm SDHC Turning Holder for DCMT 11T3 Indexable Inserts, SDHCR 2525, 107.5° - Teknik Makina
150mm SDHCL 2525 SDHC for DCMT 11T3 Indexable Inserts M11, 107.5° Cut Angle, Left-Hand Cutting, Internal Cooling - Teknik Makina
Take advantage of precise clamping, a 25 mm cutting height and compatibility with DCMT 11T3 indexable inserts to ensure consistent turning performance; order directly via Metav Werkzeuge or consult our specialists for application guidance. SDHCL 2525 Clamping Holder (SDHC) – 25 mm cutting height, 150 mm overall length | Teknik Makina A robust SDHCL 2525 clamping holder engineered for left‑hand turning applications, designed to accept DCMT 11T3 indexable inserts and to provide secure, repeatable clamping in production environments Compatible with DCMT 11T3 inserts 25 mm cutting height for robust cuts 150 mm overall length for deep reach Left‑hand cutting direction, ISO SDHCL 2525 Reliable clamping and consistent tool performance The clamping system is built to deliver secure clamping and repeatable geometry across shift cycles. With a 25 mm cutting height and a plunge‑resistant clamping arrangement, the holder stabilises the insert during interrupted cuts and heavier feed rates. The specified 107.5° cutting angle is incorporated to balance cutting forces and chip flow, which reduces chatter and preserves tool life. These measurable design choices are intended to support efficient production and consistent component tolerances. Reach and rigidity for demanding turning tasks A 150 mm overall length combined with a 32 mm head width provides extended reach while maintaining rigidity for longer overhangs. The moderate mass of 0.738 kg contributes to vibration dampening without adding unnecessary inertia, and the left‑hand orientation is suited for machines or setups that require inverse cutting direction. Terms such as left‑hand cutting are standardised in workshop planning: left‑hand denotes the feed and orientation used during turning operations, not tool handedness alone. Standard interfaces and fast setup for production use ISO designation SDHCL 2525 identifies the clamping geometry and ensures compatibility with industry tooling systems. The holder accepts a clamping screw with an M11 interface, enabling straightforward replacement and torque control during maintenance. By using established indexable inserts such as DCMT 11T3, setup times are reduced and insert stocking is simplified, which supports predictable changeovers and sustained throughput on the shop floor. Contact Metav Werkzeuge for application advice and to order the SDHCL 2525 clamping holder from Teknik Cutting Tools — expert guidance is available by phone or email to confirm machine compatibility and insert selection Technical Data Article number: D352TM Manufacturer: Teknik Makina ISO designation: SDHCL 2525 Suitable for inserts: DCMT 11T3 Facts Cutting height: 25 mm Head width: 32 mm Holder width: 25 mm Overall length: 150 mm Cutting angle: 107.5° Weight: 0.738 kg Clamping screw: M11 Cutting direction: left Special features SDHC clamping type for indexable inserts Compatible with DCMT 11T3 indexable inserts ISO standardised holder geometry Designed for left‑hand turning operations FAQ Which inserts are compatible with this holder? The SDHCL 2525 clamping holder is compatible with DCMT 11T3 indexable inserts; the combination (Teknik Makina, SKU D352TM) is specified for this insert size and form. Is the holder suitable for left‑hand turning only? Yes, the unit is configured for left‑hand cutting direction, making it appropriate for operations and machines that require inverse feed orientation. What are the key dimensions to check for machine setup? Key dimensions are 25 mm cutting height, 150 mm overall length and 32 mm head width, which should be verified against toolpost clearance and turret capacity before fitting the holder. What clamping interface is used for the insert screw? The holder uses an M11 clamping screw interface to secure the insert, supporting standard torque settings and straightforward servicing. How does the design support stable turning with longer overhangs? With its 150 mm overall length and 0.738 kg mass, the holder balances reach and rigidity to reduce vibration during extended overhang operations, improving surface finish and repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm SDJCL 2525 SDJC for DCMT 11T3 Indexable Inserts, 93° Cut Angle, M11, Interior Cooling, Left-Hand Cutting - Teknik Makina
Take advantage of robust clamping, internal coolant and a compact 25 × 25 mm shank for secure left‑hand turning in medium‑duty CNC operations; order directly via Metav Werkzeuge or consult our specialists for application advice. SDJCL 2525 clamping toolholder — SDJC for DCMT indexable inserts, left‑hand, internal coolant — Teknik Makina The SDJCL 2525 is a left‑hand turning toolholder designed for DCMT 11T3 indexable inserts, engineered to provide stable clamping and targeted coolant delivery for improved insert life in metalcutting operations. Left‑hand orientation for turning operations Internal coolant channel for improved cooling Compatible with DCMT 11T3 indexable inserts 25 × 25 mm shank, 150 mm overall length Consistent clamping for repeatable turning accuracy The holder is built around a compact 25 × 25 mm shank and a defined 93° cutting angle, providing a stable interface for turning tasks where repeatability matters. The clamping geometry secures DCMT style inserts and reduces micro‑movement at the cutting edge, which translates into consistent surface finish and predictable tool life. With a 32 mm cutting head width and a 35 mm cutting height, the component is suitable for routine external turning and facing tasks on conventional and CNC lathes. The robust design and measured mass (approx. 0.735 kg) help dampen vibration for smoother cuts. Targeted cooling and improved insert longevity This toolholder features an internal coolant passage that directs cutting fluid toward the insert seat and cutting zone, helping to reduce thermal load and minimise built‑up edge. Direct coolant improves chip control and often extends the service intervals for carbide inserts, which makes the solution economically attractive when productivity and uptime are priorities. The combination of internal coolant and the SDJC clamping concept supports reliable cutting performance, especially in interrupted cuts and heavy‑duty passes with DCMT 11T3 inserts. Straightforward installation and workshop compatibility Designed to ISO style SDJCL 2525 dimensions, the toolholder integrates smoothly into standard toolposts and turret systems. Fixing is managed with a Torx T15 drive and M3.5×11 Torx screw for secure insert retention; the holder accepts M11 mounting on compatible boring bars and pairs with the TA030 clamping plate where required. The overall 150 mm length keeps reach compact while enabling access to typical workpiece geometries. The straightforward mounting and standardised interfaces make this holder a practical choice for workshops and subcontractors aiming to rationalise their tooling setup. Purpose and ideal applications Engineered for left‑hand external turning with DCMT 11T3 inserts, this holder is most useful in small to medium‑batch production where stability and predictable tool life are required. It suits steel and alloy turning in industrial and precision workshops, and is a reliable option for lathe operations that benefit from directed coolant and a compact, rigid shank. The straightforward mechanical concept reduces setup time and supports reproducible process parameters during component runs. For procurement or technical advice on the SDJCL 2525 clamping toolholder from Teknik Makina, contact Metav Werkzeuge for tailored recommendations and delivery from our Emmerich distribution centre; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: AP517TM Manufacturer: Teknik Makina (Teknik Cutting Tools) Product designation: SDJCL 2525 / SDJC for DCMT inserts SKU: AP517TM Weight: 0.735 kg Data Shank dimensions: 25 × 25 mm Cutting head width: 32 mm Cutting height: 35 mm Overall length: 150 mm Cutting angle: 93° Direction: Left‑hand Special features Internal coolant: yes Suitable for: DCMT 11T3 indexable inserts Clamping plate: TA030 Torx key: T15 Torx screw: M3.5×11 Boring bar interface: M11 FAQ What insert type fits this holder? The holder is designed specifically for DCMT 11T3 indexable inserts and secures them with the SDJC clamping arrangement. Is the coolant internal or external? This toolholder features internal coolant, delivering cutting fluid directly to the insert seat and cutting edge to assist cooling and chip control. Which orientation is the holder for? The SDJCL 2525 is configured for left‑hand turning operations and is suitable for external turning and facing tasks. What are the key mounting features? Mounting uses a Torx T15 drive with an M3.5×11 screw; the holder is compatible with M11 boring bar interfaces and the TA030 clamping plate. Can this holder be used on CNC lathes? Yes — the compact 25 × 25 mm shank and standardised ISO dimensions make it suitable for turret and toolpost mounting on CNC turning centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm SDNCN 2525 SDNCN for DC-- Indexable Inserts 62.5° M11 For DC-- 11T3 Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the combination of precise clamping, compact design and compatibility with common indexable inserts for reliable turning operations; order via Metav Werkzeuge or request technical advice for application-specific configuration. SDNCN 2525 clamping holder – compact turning toolholder for DC-- 11T3 indexable inserts by Teknik Makina A robust SDNCN 2525 clamping holder engineered for general turning tasks on lathes and turning centres, designed to accept DC-- 11T3 indexable inserts and to deliver stable cutting conditions in confined tool setups. SDNCN 2525 clamping holder for DC-- 11T3 inserts Overall length 150 mm for compact turning setups Clamping head width 12.5 mm for precise tool access 62.5° cutting angle for controlled chip formation Stable clamping for consistent turning results The holder provides a secure clamping interface that reduces vibration and minimises chatter, resulting in improved surface finish and repeatable part quality. With a cutting angle of 62.5°, the geometry supports controlled chip flow and lowers cutting forces in many finishing and semi-finishing operations. The result is fewer rejects and less rework, which directly benefits production efficiency and throughput. Compact form for confined toolroom set-ups With an overall length of 150 mm and a holder width and height of 25 mm, this toolholder fits tight turret pockets and short overhangs without sacrificing rigidity. The compact dimensions allow closer tool spacing on multi-station turrets and reduce bending moments during cut, helping to maintain tolerance stability across small-batch and series production. The modest mass of 0.705 kg keeps rotational imbalance low while offering robust support for typical turning duties. Fast insert changes and machining flexibility This toolholder is specified for DC-- 11T3 indexable inserts, enabling economical insert changes instead of full tool replacements. Indexable inserts provide consistent cutting edges and predictable wear intervals; swapping a worn insert restores performance in seconds. The clamping arrangement corresponds to a clamping screw thread M11, facilitating secure fixation and simple maintenance routines for workshop staff. Built for dependable workshop productivity Produced under the Teknik Makina designation and carrying the SDNCN 2525 ISO form factor, the holder is intended to integrate seamlessly into standard turning workflows. The combination of compact geometry, reliable clamping and insert compatibility makes it a pragmatic choice for industrial and trade workshops seeking a balance between flexibility and process stability. Supplied through Metav Werkzeuge, the product benefits from centralised distribution and a quality-assurance filter for European customers. For reliable turning performance with Teknik Makina toolholders, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D124TM Product designation: SDNCN 2525 clamping holder Compatible inserts: DC-- 11T3 SKU: D124TM Core data Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 12.5 mm Cutting angle: 62.5° Weight: 0.705 kg Design & features ISO designation: SDNCN 2525 Clamping screw thread: M11 For indexable inserts: DC-- 11T3 Suited to lathe and turning-centre applications FAQ Which inserts are compatible with this holder? The SDNCN 2525 clamping holder is designed for DC-- 11T3 indexable inserts; Teknik Makina specifies this insert form for correct seating and chip control. What machines is this toolholder suitable for? This toolholder is suitable for lathes and turning centres where a compact 150 mm overall length and low overhang are required; the SDNCN 2525 form factor fits common turret pockets. How is the insert secured in the holder? Insert fixation is achieved via the clamping arrangement compatible with an M11 clamping screw, providing secure retention and straightforward insert changes. Can this holder be used for finishing operations? Yes, the 62.5° cutting angle and stable clamping make the holder appropriate for finishing and light-to-medium turning where controlled chip formation and surface quality are priorities. What are the key dimensions to verify before purchase? Key dimensions to check are overall length 150 mm, holder width 25 mm, holder height 25 mm, and cutting head width 12.5 mm; these determine fitment in the turret and clearance for neighbouring tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm SRGCL 2525 Turning Holder for RCMT 10T3, 30° cut, left - Teknik Makina
Turning Holder (Klemmhalter) — SRGC for RCMT Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a left-hand toolholder optimised for RCMT 10T3 indexable inserts, designed for stable clamping and reliable turning operations in metalworking workshops. Turning Holder SRGCL 2525 for RCMT 10T3 inserts 150 mm Overall length for compact setups 25 × 25 mm Shank for secure fixture 30° Cutting Angle for consistent geometry Left‑hand Cutting Direction for dedicated turning tasks Secure clamping that stabilises your machining The SRGCL 2525 design provides a compact footprint with a 25 × 25 mm shank and a 32 mm cutting-head width, which together enable firm seating of RCMT 10T3 inserts. This firm clamping reduces vibration and contributes to a more consistent Surface Finish on turned parts, making setup more predictable for everyday workshop turning. For users new to indexable tooling, a stable holder means fewer re‑adjustments and more repeatable results. Defined 30° geometry for reliable chip control A 30° Cutting Angle combined with a left‑hand Cutting Direction offers predictable cutting engagement and chip flow for operations that require that orientation. The specified geometry helps maintain cutting forces within expected ranges, which supports tool life and dimensional stability of workpieces. For customers unfamiliar with cutting-angle terminology: the angle describes the insert seating and approach to the workpiece and directly affects chip formation and surface quality. Compact length and balanced mass for practical use With an Overall Length of 150 mm and a weight of 0.72 kg, the holder balances reach and rigidity for general turning tasks. The moderate length keeps the tool close to the machine spindle, improving stiffness compared with overly long setups. The ISO designation SRGCL 2525 indicates a standardised shank profile and mounting geometry, which simplifies integration into common tool posts and quick‑change systems. Who benefits from this holder and typical applications Operators and workshops that use RCMT 10T3 indexable inserts for turning will find this holder particularly suitable for left‑hand turning operations where a compact, standardised clamping solution is required. The configuration supports medium‑duty turning, finishing passes, and applications where consistent insert positioning is essential. For teams seeking compatibility and straightforward tool management, the SRGCL form factor streamlines inventory and setup. Strongly consider the Teknik Makina Turning Holder for stable, repeatable left‑hand turning — for personalised technical advice and purchasing assistance contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications for reliable setup Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D292TM Compatible Indexable Inserts: RCMT 10T3 Overall Length: 150 mm Weight: 0.72 kg ISO Designation: SRGCL 2525 Secondary Designation: M10 Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 30° Cutting Direction: left GTIN: 4061905154225 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and what does that mean in practice? The Turning Holder (Klemmhalter) by Teknik Makina is designed for RCMT 10T3 indexable inserts; this means you can use commonly available RCMT 10T3 grades for a range of finishing and light‑to‑medium turning operations with predictable insert seating and straightforward replacement. Is the SRGCL 2525 compatible with my tool post and how to check? The SRGCL 2525 designation indicates a standardised shank profile; check that your tool post accepts a 25 × 25 mm holder. If uncertain, METAV Werkzeuge can advise whether the Teknik Makina Turning Holder matches your machine interfaces and recommend any adapters. What does the 30° Cutting Angle and left‑hand direction imply for machining choices? A 30° Cutting Angle in this Teknik Makina holder positions RCMT 10T3 inserts for controlled chip breakage and surface quality; choose left‑hand turning setups or arrange workholding so that the tool approaches the workpiece in the left‑hand orientation specified. Can METAV Werkzeuge help with technical questions before buying the Turning Holder? Yes. METAV Werkzeuge offers detailed consultation for tooling choices, setup recommendations and compatibility checks for the Turning Holder by Teknik Makina — contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert support. 150mm SRGCL 2525 Turning Holder for RCMT 10T3, 30° Cut, Left — Teknik Makina
150mm SVJC For VCMT Indexable Inserts 93° SVJCL 2525 M16-IK For DCMT 11T3 Innenkühlung Linksschneidend - Teknik Makina
Benefit from robust clamping, coolant-through capability and precise left-hand cutting geometry to maintain consistent turning performance and minimise rework. Combine stable insert support and an optimised 93° cutting angle for reliable chip control; order the SVJCL 2525 directly via Metav Werkzeuge or consult our specialists for application advice. SVJCL 2525 Clamping Holder — left-hand turning holder with internal coolant by Teknik Makina SVJCL 2525 Clamping Holder is a left-hand external turning tool holder engineered for VCMT/DCMT indexable inserts and coolant-through machining in metalworking lathes Left-hand turning orientation for opposed cuts Internal coolant for enhanced chip evacuation Compatible with VCMT and DCMT 11T3 inserts ISO designation SVJCL 2525, shank M16-IK Stable left-hand turning for predictable results The holder is designed to deliver stable clamping in left-hand operations, which is especially relevant for opposed turning and specialised fixture setups. With a 93° cutting angle and a 35 mm cutting height, the geometry has been selected to reduce cutting forces and to maintain insert seating under load. This results in fewer interruptions for retightening and a more consistent surface finish, helping workshops maintain throughput without sacrificing control. Secure insert fixation and broad compatibility A firm clamping system and standardised seating enable quick changeovers and repeatable positioning for VCMT and DCMT indexable inserts such as DCMT 11T3. The holder’s ISO designation SVJCL 2525 clarifies shank form and mounting dimensions, while the shank specification M16-IK fits common boring-bar set-ups. These features mean the toolholder is suitable for a wide range of external turning tasks, where repeatability and secure fixation reduce downtime and scrap. Coolant-through design that supports tool life The integrated internal coolant channel is routed to the cutting zone to improve chip evacuation and cooling, which in turn diminishes thermal load on the insert and workpiece. For operations with moderate to heavy material removal, targeted coolant delivery can extend insert life and maintain cutting-edge integrity. Maintenance is straightforward: the Torx fastener specification (T15 key, M3.5x11 screw) has been selected for common workshop tooling and simple access during insert changes. Practical dimensions and workshop integration At 150 mm overall length with a holder width and height of 25 mm and a cutting-head width of 32 mm, the unit balances rigidity and accessibility in confined toolposts. Weighing 0.735 kg, it provides the mass required for stability without excessive inertia when indexing or repositioning. The holder’s form factor is compatible with standard toolposts and enables a compact setup where space is limited, while retaining the rigidity needed for accurate external turning. Arrange a technical consultation with Metav Werkzeuge to specify the SVJCL 2525 clamping holder for left-hand turning applications or to verify compatibility with existing toolposts and inserts. Technical data SKU: AP536TM Manufacturer: Teknik Makina Designation: SVJC for VCMT indexable inserts (SVJCL 2525) Direction: left-hand Core measurements Overall length: 150 mm Holder width: 25 mm Holder height: 25 mm Cutting-head width: 32 mm Cutting height: 35 mm Cutting angle: 93° Weight: 0.735 kg Features and compatibility Compatible inserts: VCMT, DCMT 11T3 Internal coolant: yes U-plate: TA034 Torx key: T15 Torx screw: M3.5x11 Shank designation: M16-IK FAQ What inserts can be used with this clamping holder? The SVJCL 2525 clamping holder is compatible with common VCMT and DCMT indexable inserts, including DCMT 11T3 types. Is the holder suitable for coolant-through machining? Yes, the holder features internal coolant routing to the cutting zone to aid chip evacuation and tool life. Does this holder support left-hand turning only? The toolholder is configured for left-hand cutting direction and is intended for left-hand turning applications. What are the key dimensions to check for toolpost compatibility? Check the overall length (150 mm), holder width and height (both 25 mm) and the shank designation M16-IK for compatibility with the existing toolpost. Which fasteners are required for insert clamping and maintenance? Insert and clamping maintenance use a Torx T15 key and an M3.5x11 mounting screw as specified for the unit. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Tool Holder 25mm Width 25mm Height 30° Cutting Angle - Teknik Makina
Benefit from a compact toolholder that combines secure clamping and controlled reach for consistent turning setups; its 25 x 25 mm cross-section and 150 mm overall length enable stable installation and efficient chip clearance. Order or request advice directly via Metav Werkzeuge to integrate this toolholder into production layouts. Clamping Holder L150mm (P093TM) — 25 x 25 mm cross-section, 30° cutting angle by Teknik Makina The Clamping Holder L150mm is a compact toolholder designed for turning and lathe applications, offering a low-profile cross-section and a 30° approach to improve accessibility and chip flow in confined setups 25 x 25 mm compact cross-section 150 mm overall length 30° cutting angle for versatile setups Stable, low-profile geometry for precise toolholding The holder's 25 x 25 mm cross-section gives a compact footprint that reduces interference in multi-tool turrets and tight fixtures while maintaining rigid clamping. This geometry translates into repeatable positioning and less vibration during cuts, which supports higher process stability. For workshops that standardise on metric toolposts, the reduced overhang assists in keeping cutting forces predictable and tool life consistent. Reach and balance to suit diverse turning setups With an overall length of 150 mm and a mass of 0.594 kg, the component offers a balanced compromise between reach and stiffness. The length provides sufficient extension for medium-reach operations without excessive cantilever, enabling simpler setups and fewer auxiliary extensions. The modest weight contributes to dynamic stability in rotating assemblies and helps maintain alignment across repeated cycles. 30° approach angle for improved chip control and access The 30° cutting approach gives a practical balance between clearance and cutting force direction, making the holder suitable for common turning operations where access or tool shank clearance is limited. The inclined geometry assists chip evacuation and can reduce contact length at the insert edge, which in many cases helps to moderate cutting temperatures and improve surface finish without changing cutting parameters drastically. Clear specification and straightforward integration into toolroom systems Supplied under SKU P093TM and complying with an ISO 2525 designation, the unit is specified for straightforward integration into existing clamping systems. The concise set of measurable characteristics — compact cross-section, defined length and angle — simplifies process planning and tooling lists. Manufactured by Teknik Cutting Tools, the holder supports efficient inventory management for workshops seeking consistent, repeatable toolholder performance. Contact Metav Werkzeuge for tailored advice on system compatibility and to arrange procurement of the Teknik Cutting Tools clamping holder — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P093TM Label: Klemmhalter L150mm Manufacturer: Teknik Makina Dimensions & weight Overall length: 150 mm Cross-section: 25 x 25 mm Weight: 0.594 kg Cutting angle: 30° Standards & identification ISO designation: 2525 Product type: Clamping holder eClass: 21181004 FAQ What are the main dimensions of this clamping holder? The clamping holder has a cross-section of 25 x 25 mm and an overall length of 150 mm. Which cutting angle does the holder provide and what is its advantage? The holder features a 30° cutting angle; this approach improves access and chip control in many turning operations. Is the holder identified by a product code for ordering? Yes, the item is listed under SKU P093TM for ordering and inventory purposes. Which standard or designation applies to this toolholder? The holder is specified with ISO designation 2525 and is classified under eClass 21181004. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Tool Holder AL 2525 M22- ER22 For 22 ER Inserts Right-Hand Cutting Innenkühlung - Teknik Makina
Take advantage of the combination of durable construction, consistent clamping accuracy and compact length for reliable external threading operations; order the clamping holder directly via Metav Werkzeuge or consult our specialists for application advice. Clamping holder D266TM — compact holder for right‑hand external threading The Clamping holder D266TM is a precision clamping tool for right‑hand external threading in turning operations, engineered for integration with M22‑ER22 collet systems. Precision clamping for outside threads Compatible with M22‑ER22 collet system Compact 150 mm overall length Cutting head and holder width 25 mm Solid 0.748 kg mass for stability Consistent clamping for repeatable thread quality The D266TM clamping holder delivers repeatable clamping accuracy that reduces variation between passes and supports consistent thread profiles. Built with a 25 mm holder width and a 25 mm cutting‑head width, the tool provides stable support for the tool shank and minimises chatter. The combination of dimensional rigidity and a measurable cutting height of 30 mm helps maintain axial alignment, so cycle times remain predictable and scrap rates fall. For workshops seeking reliable production results, the holder’s design focuses on process stability rather than cosmetic features. Compact footprint that eases machine setup At an overall length of 150 mm and weighing 0.748 kg, this holder occupies little turret space while retaining sufficient mass to absorb cutting forces. The compact form factor supports multi‑tool turrets and smaller lathes without compromising accessibility to the workpiece. Because the holder is engineered for integration with standard collet systems, changeovers are simplified and set‑ups are faster — a practical efficiency gain for batch work and mixed runs. The compactness also aids in collision‑sensitive applications where tool overhang must be minimised. Proven interface and right‑hand cutting orientation Compatibility is deliberate: the holder accepts the M22‑ER22 collet/rod designation and suits 22 ER‑type tooling interfaces, ensuring straightforward integration into established clamping systems. The tool is configured for right‑hand cutting, matching common thread‑turning directions on lathes. The ISO designation AL 2525 provides a clear reference for production planners and purchasing, while the exposed numeric values enable precise verification during incoming‑goods inspection. Clear interface standards reduce guesswork at assembly and speed commissioning on the shop floor. For application guidance or to secure the Teknik Makina clamping holder D266TM via Metav Werkzeuge — including rapid supply from our Emmerich hub — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and reliable delivery. Technical data Article number: D266TM Name: Clamping holder (Klemmhalter) Manufacturer: Teknik Makina SKU: D266TM Measurements Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 25 mm Cutting height: 30 mm Weight: 0.748 kg Compatibility & features Collet/rod designation: M22‑ER22 For outside threading (external thread) Cutting direction: right ISO designation: AL 2525 ECLASS: 21181004 FAQ What clamping system does this holder use? The clamping holder D266TM is designed for the M22‑ER22 collet/rod interface, allowing secure retention with standard ER22 collets. Is the tool suitable for external thread turning with right‑hand threads? Yes, the holder is configured for right‑hand cutting and is intended specifically for outside threading operations. What are the main dimensions to check for turret clearance? Key dimensions are 150 mm overall length, 25 mm holder width and 30 mm cutting height; the mass is 0.748 kg for stability considerations. Can indexable or modular tooling be mounted with this holder? The holder supports tooling compatible with the 22 ER designation and integrates with common collet systems for modular setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Tool Holder External Turning, Solid Construction - Teknik Makina
Take advantage of precise clamping, industrial robustness and straightforward installation to keep external turning operations stable and predictable; order the holder directly via Metav Werkzeuge or consult our specialists for a tailored supply solution. Klemmhalter — Clamping holder for external turning by Teknik Makina The Klemmhalter is a clamping holder designed for external turning, providing stable tool fixation for general lathe machining applications. Designed for external turning operations Compact clamping holder RP106TM Manufactured by Teknik Makina Stable clamping for consistent machining results A secure clamping arrangement reduces chatter and helps to maintain a uniform surface finish. The clamping function of this holder delivers repeatable positioning, which supports shorter setup times and fewer rework cycles. For bench and production settings where process reliability matters, the emphasis is on mechanical stability and consistent tool retention rather than decorative aspects. The result is improved productivity through reduced scrap and less downtime, driven by dependable mechanical restraint of the cutting tool. Integration into workshop workflows and machine compatibility Designed for general lathe use, the holder suits typical external turning tasks and meshes with standard workshop procedures. The product simplifies tooling routines by offering straightforward mounting and alignment on conventional tool posts, enabling quicker changeovers and predictable setup geometry. This pragmatic approach supports efficient throughput and helps maintain cycle-time targets in small-batch and series production alike while keeping the focus on operational efficiency and ease of use. Reliability under daily production demands Built by a recognised supplier, the holder emphasises durability and steady performance in repetitive machining environments. The association with Teknik Makina signals an industrial supply orientation and aligns the component with established manufacturing practices. When combined with Metav’s distribution and quality-filtering at Emmerich, the holder becomes part of a dependable supply chain that supports continuous workshop operation and reduces procurement complexity. Contact Metav Werkzeuge for procurement advice or to discuss how the Teknik Makina RP106TM clamping holder can fit specific turning applications: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RP106TM SKU: RP106TM EClass: 21181004 Product type: Clamping holder Core data No numerical specifications supplied Special features Application: External turning Label: Klemmhalter Manufacturer: Teknik Makina Category path: Zerspanen > Klemmhalter UID: RP106TM FAQ What operations is this holder intended for? The holder is intended primarily for external turning operations; the RP106TM clamping holder from Teknik Makina is specified for general lathe tool fixation. Is the clamping holder suitable for series production? Yes, the design and manufacture of this clamping holder support repetitive use in production environments, providing stable clamping and consistent tool positioning. Which SKU identifies this product? The product is listed under SKU RP106TM and labelled as a Klemmhalter (clamping holder) by Teknik Makina. How does this holder improve machining outcomes? By providing steady clamping and repeatable positioning, the holder reduces vibration and helps maintain surface finish consistency during external turning. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Tool Holder For VER22 Indexable Inserts 25mm Width 25mm Height T15 Torx - Teknik Makina
Combining precise clamping for VER22 indexable inserts with a rigid 25 mm shank and a 150 mm overall length, the holder delivers steady cutting performance and extended insert life. Order the clamping holder directly via Metav Werkzeuge or consult our specialists for application-specific advice. Klemmhalter VER22 L150mm — clamping holder for VER22 indexable inserts by Teknik Makina A robust Klemmhalter VER22 L150mm engineered to secure VER22 indexable inserts in turning applications and ensure repeatable positioning. Secure clamping for VER22 inserts 150 mm overall length 25 mm shank width Torx T15 screw M4x11 Stable clamping that keeps machining consistent The clamping system is built to provide repeatable positional accuracy for indexable tooling, reducing vibration and cutting deviation. Compatibility with VER22 indexable inserts and the ISO 2525 designation means insertion and replacement are straightforward, while the firm grip contributes to longer tool life and fewer rejects in production. The combination of precise seating and clamping force translates directly into predictable machining results and reduced setup variability. Rigidity and dimensions that reduce deflection A solid tool shank with 25 mm width and 25 mm height, paired with an overall length of 150 mm, gives a balance between reach and stiffness. The 27.5 mm cutting-head width and 30 mm cutting height are optimised to resist bending moments typical of turning operations, which helps maintain consistent surface finish and tighter tolerances. The holder’s mass of 0.705 kg contributes to dampening of minor oscillations, supporting stable chip formation and improved process reliability. Fast, secure fastening to cut downtime Maintenance and insert changes are made efficient by the Torx T15 fastening system and the specified M4x11 screw. The Torx interface offers a positive driver engagement that reduces cam‑out and allows controlled torque application, decreasing the risk of screw damage and ensuring repeatable clamp preload. Quick, reliable fastening reduces tool-change time and supports higher machine utilisation without compromising safety or repeatability. Suitable for workshop and production environments Engineered for turning applications, the holder is a pragmatic choice for workshops and production lines that require reliable, straightforward tooling. The ISO 2525 reference ensures compatibility with standardised clamping practices, while the compact form factor keeps set-up simple on conventional tool posts and turret systems. The design prioritises functionality and serviceability, helping to streamline inventory and maintenance routines. For ISO‑compliant clamping from Teknik Makina, request a quotation or technical advice from Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: D522TM Item: Clamping holder for VER22 indexable inserts Brand: Teknik Makina Core specifications Overall length: 150 mm Weight: 0.705 kg Shank width: 25 mm Shank height: 25 mm Cutting head width: 27.5 mm Cutting height: 30 mm ISO designation: 2525 Features For VER22 indexable inserts Torx T15 fastening Torx screw M4x11 Designed for turning applications FAQ Which inserts are compatible with this clamping holder? The holder is designed for VER22 indexable inserts and adheres to the ISO 2525 seating standard for secure fitment. What are the key dimensions to check for machine compatibility? Check the 150 mm overall length and the 25 mm shank width and height to ensure clearance and rigidity on the intended tool post or turret. Which fastening tool is required for the screw? A Torx T15 driver is specified for the M4x11 screw to deliver correct torque and avoid cam‑out during insert changes. Is the holder suitable for high‑speed turning? The holder’s rigid shank and positive clamping make it appropriate for many turning operations; final suitability depends on cutting parameters and machine capability. Can I order this holder using the SKU? Yes, reference SKU D522TM when enquiring to ensure the correct clamping holder is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Toolholder DCLNL 2525 M19 For CN-- 1906 Indexable Inserts Innenkühlung Left-Hand Cutting 95° - Teknik Makina
Benefit from a rigid left-hand DCLN clamping toolholder with a 95° cutting angle and an M19 shank for stable seating of CN--1906 inserts; the compact 150 mm length and 0.82 kg mass support consistent tool behaviour in serial turning. Order the DCLN clamping toolholder directly via Metav Werkzeuge or ask our consultants if needed. DCLN clamping toolholder for CN-- indexable inserts (DCLNL 2525) — left-hand, M19 shank A robust DCLN clamping toolholder engineered for left-hand external turning, optimised for CN-- 1906 indexable inserts and intended for precise CNC turning applications. Left-hand orientation for external turning ISO DCLNL 2525 format Compatible with CN-- 1906 inserts Robust M19 shank for stable clamping Precision and rigidity for consistent turning results The DCLN clamping toolholder is built to deliver precision and rigidity in repetitive turning cycles. Its 95° cutting angle is designed to support stable chip flow and predictable tool engagement; as a result, dimensional consistency is promoted and rework is reduced. The M19 shank ensures secure retention in standard tool posts, which stabilises the cutting edge under intermittent loads. Where tight tolerances are required, this combination of geometry and solid construction reduces vibration and supports repeatable machining outcomes. Compatibility that speeds set-up and stock management Compatibility with CN-- 1906 indexable inserts and the standardised DCLNL 2525 format simplifies tooling logistics in mixed-production shops. The holder accepts widely used insert geometries, meaning insert changes can be carried out quickly and clamping elements are standardised across setups. This reduces downtime during cutter changes and lowers the variety of spare parts that must be carried in the workshop. Clear ISO designation and a common shank format support straightforward integration into existing tool setups. Designed for production environments and operator confidence Dimensions have been chosen for a balance of reach and stability: a 150 mm overall length, 32 mm cutting‑head width and 25 mm holder height provide a compact but rigid footprint, while a 40 mm cutting height secures correct insert alignment. At 0.82 kg, the unit is heavy enough to feel robust yet light enough for safe handling during maintenance. The result is a toolholder that is both practical at the bench and dependable in continuous production, which helps maintain cycle-time targets and reduces process variation. For technical advice or to arrange supply from Teknik Cutting Tools via Metav Werkzeuge, request detailed integration information or order enquiries by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: D304TM Manufacturer: Teknik Makina Article: DCLN for CN-- Indexable Inserts ISO designation: DCLNL 2525 ECLASS: 21181004 Facts Holder height: 25 mm Cutting-head width: 32 mm Holder width: 25 mm Cutting height: 40 mm Cutting angle: 95° Overall length: 150 mm Weight: 0.82 kg Shank designation: M19 Cutting direction: left Special features Compatible with CN-- 1906 inserts Left-hand cutting orientation Standardised DCLNL 2525 format Designed for CNC external turning FAQ What inserts fit this toolholder? The DCLN clamping toolholder is compatible with CN-- 1906 indexable inserts and is specified to accept the common geometries associated with that designation. Is the holder suitable for right-hand turning? This toolholder is supplied in a left-hand orientation; for right-hand applications, the corresponding right-hand holder should be selected. What is the mounting or shank specification? The holder uses an M19 shank designation, which is compatible with tool posts designed for that connection standard and provides secure clamping. Does the toolholder support heavy-duty cuts? With a 95° cutting angle and robust construction, the holder is intended for stable engagement in external turning; final suitability depends on material, insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Toolholder DCMNN 2525 M12 For CN-- 1204 Indexable Inserts, 50° Cutting Angle, Internal Cooling, Right-Hand Cutting - Teknik Makina
Take advantage of the combination of secure clamping, precise compatibility with CN-- 1204 indexable inserts and a compact 150 mm overall length for reliable turning operations; improved tool life and stable chip control reduce downtime and rework. Order the DCMNN 2525 clamping holder directly via Metav Werkzeuge or ask our consultants if needed. DCMNN 2525 — Clamping holder for CN-- 1204 indexable inserts (Teknik Cutting Tools) DCMNN 2525 is a compact clamping holder designed for turning applications with CN-- 1204 indexable inserts, offering a secure M12 shank connection and a 150 mm overall length for extended reach. DCMNN 2525 for CN-- 1204 inserts 150 mm overall length for deep reach 12.5 mm cutting head width M12 shank with secure clamping Improve process stability with a secure clamping system The DCMNN 2525 clamping holder delivers consistent clamping force and repeatable seating for CN-- 1204 indexable inserts, which translates to fewer interruptions and more predictable cycle times. The holder’s engineered geometry and 50° cutting angle support reliable chip formation and reduce the risk of insert movement under load. For production environments where process stability is essential, this toolholder helps maintain tolerances and lowers the likelihood of scrap, making turning routines more efficient and less dependent on constant manual adjustment. Designed for precise compatibility and easy integration With an ISO designation of DCMNN 2525 and direct compatibility with CN-- 1204 inserts, the holder simplifies tool inventory and changeover. The 12.5 mm cutting-head width and defined cutting-height relationship allow predictable set-up heights when used with standard insert sizes, reducing set-up time at the machine. The M12 shank interface ensures a secure mechanical connection to common boring bars or tool assemblies, enabling straightforward integration into existing tool posts without the need for specialised adapters. Compact reach and handling that support versatile machining tasks The 150 mm overall length offers a balance between reach and rigidity, suitable for medium-reach turning operations where access is required without compromising stiffness. At a weight of 0.778 kg, the unit is light enough for quick handling yet substantial enough to damp vibrations in many workshop applications. The holder’s dimensions—25 mm width and 25 mm height—are optimised to fit standard turrets and cross slides, making it a practical choice for small-batch production and maintenance work where adaptability and fast changeovers are valued. Clear technical attributes that aid purchasing and application decisions Key specifications such as cutting angle 50°, cutting height 42 mm, and the M12 mount provide objective criteria for engineers selecting tooling for specific materials and operations. Compatibility with CN-- 1204 indexable inserts reduces tooling complexity and aligns with commonly available insert grades. These measurable characteristics support informed decisions about tool selection, setup parameters and expected performance, offering technical clarity for procurement and production planning. Choose the Teknik Cutting Tools DCMNN 2525 clamping holder for secure insert seating and predictable turning performance — contact Metav Werkzeuge in Emmerich for tailored advice and order coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D215TM Manufacturer: Teknik Makina Designation: Klemmhalter / DCMNN for CN-- 1204 Indexable Inserts ISO designation: DCMNN 2525 SKU: D215TM Facts Overall length: 150 mm Holder width: 25 mm Holder height: 25 mm Cutting head width: 12.5 mm Cutting height: 42 mm Cutting angle: 50° Weight: 0.778 kg Shank/bohrstangen designation: M12 Compatible inserts: CN-- 1204 Special features Compatible with CN-- 1204 indexable inserts ISO designation DCMNN 2525 Secure M12 shank clamping Compact 150 mm overall length for medium reach Designed for turning/indexable-insert applications FAQ What insert type fits this holder? The holder is designed for CN-- 1204 indexable inserts and accepts standard CN-- 1204 geometries without modification. What is the overall length and how does it affect rigidity? The overall length is 150 mm; this length provides a compromise between reach and rigidity suitable for many medium-reach turning tasks while maintaining acceptable stiffness. Which shank or connection is used for mounting? The toolholder uses an M12 shank/connection, enabling secure attachment to compatible boring bars and tool assemblies. What are the key dimensions to check for turret compatibility? Important dimensions are 25 mm holder width, 25 mm holder height and 12.5 mm cutting head width; these determine fit in standard turrets and cross slides. Is the cutting angle specified and why is it important? Yes — the cutting angle is 50°, which influences chip control and cutting forces; select the appropriate insert grade to match this geometry for optimal performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Clamping Holder AL 1616 H16- ER16 For 16 ER Inserts Right-Cutting Innenkühlung - Teknik Makina
Benefit from a compact, 16 × 16 mm clamping profile combined with 16 ER indexable insert compatibility and a 100 mm overall length for consistently accurate external threading; order the clamping holder directly via Metav Werkzeuge or consult our specialists for application advice. Clamping holder AL 1616 — for outside threading, 16 mm profile — Teknik Makina The clamping holder AL 1616 is a compact toolholder engineered for secure external threading on lathes and turning centres, optimised for standard 16 ER indexable inserts and right-hand cutting. Compact 16 × 16 mm clamping profile Compatible with 16 ER indexable inserts 100 mm overall length for stable set-up Right-hand cutting for external threads Precise alignment for consistent thread quality The holder’s 16 mm clamping profile and AL 1616 ISO designation provide a defined seating that reduces radial run-out and ensures repeatable part tolerances. By accepting 16 ER indexable inserts the system permits fast insert changes without resetting the tool position, which shortens set-up time and keeps cycle times predictable. The stated 22 mm cutting height aligns the insert edge with common lathe centres; this feature aids in achieving consistent thread profiles even when operators have differing levels of experience. Stiffness and vibration control that extend insert life A rigid toolholder contributes directly to tool life. The 100 mm overall length balances accessibility with stiffness to limit deflection during thread turning, while the modest mass (approx. 0.25 kg) minimises unwanted dynamic loading. These attributes reduce chatter and promote a finer surface finish on external threads, so the insert life of the 16 ER tooling is optimised and downtimes for tool changes are reduced. Right-hand cutting geometry is provided for external thread turning on conventional and CNC lathes. Straightforward integration with common tool systems Designed to mate with H16-ER16-style holding systems, the toolholder simplifies installation into existing boring-bar or toolpost arrangements. The H16-ER16 designation refers to the compatible bar / shank interface, facilitating rapid retrofit into standard setups without special adaptors. As an ISO-compatible clamping solution, this holder supports rapid changeovers and predictable positioning, making it suitable for small-batch production and larger manufacturing runs alike. For detailed machine compatibility or to confirm insert seat heights, Metav Werkzeuge’s technical team can provide specification guidance and drawings. For order placement, specification confirmation, or to discuss integrating the Teknik Makina clamping holder AL 1616 into a production line, please contact Metav Werkzeuge in Emmerich via e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — reliable supply from stock is available. Technical data Article number: D259TM Brand: Teknik Makina ISO designation: AL 1616 ECLASS: 21181004 Facts Height: 16 mm Head width: 16 mm Width: 16 mm Cutting height: 22 mm Overall length: 100 mm Weight: 0.25 kg Special features Compatible inserts: 16 ER Shank / bar designation: H16-ER16 Cutting direction: right-hand Application: for outside thread (external threading) FAQ Which insert format fits this holder? The clamping holder AL 1616 accepts 16 ER indexable inserts; this format provides quick change capability and stable clamping for external threading tasks. Is the cutting direction specified for the holder? Yes, the holder is configured for right-hand cutting suitable for external threading operations on standard lathes and turning centres; this is recorded for the Teknik Makina holder (SKU D259TM). What does the ISO designation AL 1616 indicate? The AL 1616 designation describes the toolholder’s 16 × 16 mm clamping profile, ensuring compatibility with standard toolposts and fixtures and predictable insert line-up. Can this holder be used in CNC turning centres? The holder’s robust geometry and H16-ER16 shank compatibility make it suitable for both manual lathes and CNC turning centres, provided the machine accepts the stated shank interface. How does overall length affect performance? The 100 mm overall length is a compromise between accessibility and stiffness; it offers stable machining for external threads while allowing reach into typical component geometries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Clamping Holder For TCMT 16T3 Indexable Inserts Right 91° Cutting Angle - Teknik Makina
Take advantage of robust clamping and precise geometry — a compact 16 x 16 mm shank and compatibility with TCMT 16T3 indexable inserts ensure stable turning and quick insert changes. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Klemmhalter TCMT 16T3 – 16 x 16 mm indexable insert holder by Teknik Makina A Klemmhalter for TCMT 16T3 indexable inserts, built for right-hand turning with a compact 16 x 16 mm square shank for reliable mounting in standard toolposts. Square 16 x 16 mm shank Accepts TCMT 16T3 indexable inserts Right-hand holder with 91° cutting angle Consistent clamping for reliable production Stable clamping is central to predictable machining results. The 16 x 16 mm square shank and ISO 1616 designation deliver a compact footprint with secure seating in the toolholder, reducing micro‑movement and preserving tool life. Because the insert pocket is dimensioned for TCMT 16T3 inserts, insert seating is repeatable and regrinding cycles are simplified. Reduced vibration translates into improved surface finish and consistent cycle times, which benefits production planning and cost efficiency. Geometry that supports accurate toolpaths A defined cutting geometry makes process planning straightforward: the 91° cutting angle and 22.5 mm cutting height position the insert for typical turning profiles while maintaining chip control. The holder’s right-hand orientation is matched to standard turning directions, ensuring predictable radial engagement. The clamping screw specification (M3.5x8.5) and T15 Torx key compatibility enable fast insert changes and secure fixation, which minimises downtime during tool changes and maintenance. Compact design for easy integration and workshop resilience With a low mass of 0.194 kg, the holder offers a good stiffness‑to‑weight ratio that suits both benchtop lathes and larger CNC turning centres without adding unnecessary overhang. The 1616 ISO marking and concise dimensions aid repeatable set-up and tool-data entry in CAM systems. Manufactured by Teknik Makina to meet industrial tolerances, this toolholder supports a broad range of general turning tasks and is straightforward to store and handle in busy workshops. Metav’s distribution ensures dependable delivery and an established quality filter for European operations. Contact Metav Werkzeuge for tailored advice on Teknik Makina toolholders and to secure the D473TM for reliable turning performance Technical data SKU: D473TM ECLASS: 21181004 Product type: Klemmhalter Manufacturer: Teknik Makina Facts Shank width: 16 mm Shank height: 16 mm Cutting head width: 16 mm Cutting height: 22.5 mm Cutting angle: 91° Weight: 0.194 kg Torx screw: M3.5x8.5 Torx key: T15 Direction: right Special features For TCMT 16T3 indexable inserts ISO designation: 1616 SKU: D473TM Right-hand orientation FAQ What inserts fit this holder? The holder accepts TCMT 16T3 indexable inserts; the pocket and clamping geometry are matched to that insert format. Is the holder suitable for automated tool changers? Yes, the compact 16 x 16 mm shank and standard ISO designation facilitate integration into automated tool systems where a matching toolpost or turret seating is used. Which screw and key are required for insert clamping? Insert clamping uses an M3.5x8.5 Torx screw tightened with a T15 Torx key for secure fixation. Can the holder be used for heavy roughing cuts? The holder is designed for general turning operations; for heavy roughing, assess the machine stiffness and insert grade. The D473TM’s robust clamping helps reduce movement, supporting moderate roughing when correctly specified. What is the product code for ordering? Order using SKU D473TM, which identifies this Teknik Makina clamping holder for TCMT 16T3 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm DWLNR 1616 H06 For WN-- 0604 Indexable Inserts Right-Hand Cutting, 95° - Teknik Makina
Take advantage of a compact tool design that pairs 95° cutting geometry with compatibility for WN-- 0604 indexable inserts, ensuring predictable performance and reduced inventory complexity; order directly via Metav Werkzeuge or consult our specialists for application guidance. Clamping holder DWLN for WN-- 0604 (95°) — right-hand, DWLNR 1616 by Teknik Makina The Clamping Holder DWLN for WN-- indexable inserts is a right-hand toolholder engineered for 95° turning applications, optimised for secure seating of WN-- 0604 inserts in production and workshop environments 95° cutting angle for versatile turning Compatible with WN-- 0604 indexable inserts Right-hand orientation for standard operations DWLNR 1616 ISO designation, robust build Accurate fit and consistent contact for repeatable turning The compact clamping solution delivers controlled insert seating and predictable cutting geometry. With a 95° cutting angle and ISO designation DWLNR 1616, the design helps maintain consistent contact between holder and insert, which reduces deflection and improves surface finish. This stability is particularly valuable where repeatability matters: the reliable geometry lowers scrap rates and supports efficient batch production without complex tooling changes. Robust dimensions that support stability and tool life Designed with a clamping height of 16 mm and a cutting-head width of 20 mm, the holder provides a stable platform for indexable inserts; the cutting height of 26 mm and an overall length of 100 mm balance rigidity and accessibility. At just 0.229 kg, the unit is easy to handle while remaining sufficiently rigid for standard turning tasks. These measurable specifications translate into reduced vibration and longer insert life, offering operational gains without the need for oversized fixtures. Workflow benefits: fewer variants, faster set-up Compatibility with the widely used WN-- 0604 insert format simplifies inventory and tool management. The right-hand orientation suits the majority of conventional turning operations, so the holder integrates smoothly into existing tool sets. By standardising on familiar insert formats and an ISO-recognised holder type, lead times for tool changes are shortened and process planning becomes more straightforward — a clear rational advantage for production planners. Practical applications and handling notes Best employed in turning operations that accept WN-- 0604 inserts, the holder is a pragmatic choice for workshops seeking durable, consistent tool clamping. The unit’s compact profile allows use in confined tool posts while its ISO conformity supports interchangeability across machines. For selection and pairing with suitable inserts, technical consultation is recommended to match insert geometry and grades to specific material and cutting data. Discuss the 95° DWLN clamping holder from Teknik Makina with Metav Werkzeuge — our Emmerich team provides application advice and reliable supply for your workshop needs Technical data SKU: D181TM Manufacturer: Teknik Makina Article: Clamping holder DWLN for WN-- indexable inserts ISO designation: DWLNR 1616 Cutting direction: right Compatible inserts: WN-- 0604 Facts Cutting angle: 95° Overall length: 100 mm Cutting height: 26 mm Clamping height: 16 mm Head width: 20 mm Holder width: 16 mm Weight: 0.229 kg Eclass: 21181004 Special features Right-hand orientation Designed for indexable insert turning ISO-conformant DWLNR 1616 type First-class metalworking Files available for reference FAQ What inserts fit this holder? The clamping holder is designed for WN-- 0604 indexable inserts; pairing the holder with that insert size ensures correct seating and cutting geometry. Is the holder right- or left-hand? This DWLN toolholder is right-hand oriented for conventional turning directions, as indicated by the product specification. What are the key dimensions to check before ordering? Important measures include the clamping height 16 mm, head width 20 mm, cutting height 26 mm and overall length 100 mm; these ensure compatibility with the machine tool and insert. Which SKU should be referenced when ordering? Please reference SKU D181TM for the DWLN clamping holder to ensure correct identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Klemmhalter 90° SDACR 1616 H07-F for DCMT 0702 Indexable Inserts Right-Handed Innenkühlung - Teknik Makina
Compact, stable clamping combined with a short 100 mm overall length and compatibility with DCMT 0702 indexable inserts ensures dependable turning performance; order the clamp holder directly via Metav Werkzeuge or speak with our consultants for application advice. Clamp holder SDACR-F (SDACR 1616) – right-hand holder for DCMT 0702 inserts by Teknik Makina A Clamp holder SDACR-F designed as a compact, right-hand turning tool holder for indexable DCMT 0702 inserts, offering a 90° cutting geometry for conventional external and light internal turning. Right-hand turning configuration Compatible with DCMT 0702 inserts 16 mm head width and height Compact overall length of 100 mm Consistent clamping for repeatable turning results The compact clamp holder is engineered to provide secure, repeatable clamping of DCMT 0702 indexable inserts, which reduces vibration and improves surface finish. With an ISO designation of SDACR 1616, the geometry is optimised for a 90° cutting angle, so tool engagement is predictable and chip flow is controlled. This configuration is particularly beneficial in batch production where repeatability and minimal setup time translate directly into higher throughput and lower scrap rates. Space-saving form and practical mounting for tight setups Designed with a modest overall length of 100 mm and a head dimension of 16 mm, the holder gives access where longer tooling would interfere. The holder is supplied in a right-hand configuration and is compatible with shank standard H07-F, allowing straightforward installation on many lathes and toolposts. At 0.207 kg, the unit minimises overhang-induced deflection, meaning cutters maintain cutting geometry more reliably under load — a decisive advantage in small-part machining and finishing passes. Clear compatibility and efficient indexable insert handling Compatibility with DCMT 0702 indexable inserts simplifies inventory and reduces tool-change complexity. The clamping concept secures the insert in the seat so that index changes are fast and repeatable, which supports shorter cycle times. As an ISO-conforming SDACR type, the holder integrates with existing insert stocks and toolholder systems, enabling a seamless transition in production lines and straightforward replacement of worn inserts without special adapters. Suitable for workshop and light industrial turning tasks The holder is aimed at workshops and light industrial users who require a robust, compact solution for external turning and light profiling. Its right-hand cutting orientation and 90° approach are ideal for standard turning tasks, deburring and finish operations where tool access is limited. The combination of compact size, precise seating and straightforward geometry offers a dependable baseline tool that helps maintain machine utilisation and reduces interruption during shift changes. For compact, reliable clamping in turning operations contact Metav Werkzeuge to discuss the Teknik Makina SDACR-F clamp holder, request technical clarification or confirm fitment for specific machine setups — Metav Werkzeuge is ready to assist from Emmerich. Technical data Article number: D438TM Manufacturer: Teknik Makina Product type: Clamp holder SDACR-F for DCMT indexable inserts ISO designation: SDACR 1616 Facts Overall length: 100 mm Head width: 16 mm Head height: 16 mm Weight: 0.207 kg Cutting angle: 90° Cutting direction: right Compatible inserts: DCMT 0702 Shank designation: H07-F eClass: 21181004 Special features Right-hand turning configuration Compact form for limited access ISO-compliant SDACR design For DCMT 0702 indexable inserts FAQ Which insert type fits this holder? The clamp holder SDACR-F is designed for DCMT 0702 indexable inserts and secures them in the SDACR 1616 seat for stable turning performance. Is the holder right- or left-hand oriented? This specific SDACR-F variant is a right-hand tool holder, intended for conventional right-hand turning operations. What are the key dimensions to check for machine compatibility? Important dimensions are an overall length of 100 mm, head width and height of 16 mm, and the shank/adapter reference H07-F for mounting considerations. Will the compact length improve rigidity? The reduced overall length of 100 mm and modest weight (0.207 kg) reduce overhang and help limit deflection compared with longer holders, improving rigidity in many turning setups. What ISO designation identifies this holder? The holder carries the ISO designation SDACR 1616, which clarifies its geometry and helps ensure correct pairing with compatible inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Klemmhalter 93° SDJCL 1616 H07 For DCMT 0702 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Benefit from a compact, left‑hand clamping solution that combines precise fit for DCMT 0702 indexable inserts and a rigid 16 x 16 mm shank to keep turning operations stable; order the SDJCL 1616 clamping holder (D361TM) directly via Metav Werkzeuge or request guidance from our technical consultants. SDJCL 1616 clamping holder — left‑hand, for DCMT 0702 indexable inserts (Teknik Makina) SDJCL 1616 is a left‑hand clamping holder engineered for secure turning with DCMT 0702 indexable inserts in compact lathe and CNC setups Left-hand holder for DCMT 0702 inserts Shank 16 x 16 mm for secure clamping Overall length 100 mm with 93° cutting angle Stable left‑hand turning with proven insert compatibility The holder is designed for left‑hand cutting direction and accepts standard DCMT 0702 indexable inserts, enabling consistent edge engagement during left‑hand turning operations. The geometry with a 93° cutting angle supports neutral cutting forces for a range of finishing and semi‑finishing tasks; this reduces lateral motion and contributes to improved surface consistency. The clamping arrangement is optimised for repeatable insert seating so set‑up time is reduced and component tolerances are easier to maintain. Compact shank and rigid head for vibration control A square 16 x 16 mm shank and a 20 mm cutting‑head width provide a compact footprint while offering torsional resistance during interrupted cuts. The holder’s cutting height 18 mm aligns insert top‑land position for predictable toolpaths, and the modest weight 0.2 kg limits overhang inertia on small toolposts. Fast axial mounting is facilitated by a Torx screw specified as M2.5x5.5 with a T8 key, which secures the insert clamp and helps prevent screw cam‑out during torqueing. Practical benefits for workshop efficiency and inventory With an overall length of 100 mm, the toolholder fits many small to mid‑sized turning fixtures without requiring bespoke holders. The standardisation on DCMT inserts reduces the number of different spare inserts required in stock and simplifies changeovers. The holder’s concise design supports close‑quarter machining and is suitable where space is limited but precision remains essential. The component is supplied under Teknik Makina quality standards and carries the SKU D361TM for easy reordering. For reliable left‑hand turning choose the Teknik Makina SDJCL 1616 — contact Metav Werkzeuge in Emmerich for tailored technical advice and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D361TM Manufacturer: Teknik Makina ISO designation: SDJCL 1616 For inserts: DCMT 0702 Torx screw: M2.5x5.5 Numbers / Core technical data Shank width: 16 mm Shank height: 16 mm Head width: 20 mm Cutting height: 18 mm Overall length: 100 mm Weight: 0.2 kg Cutting angle: 93° Special features / Versions Left‑hand cutting direction Clamping screw key: T8 Toolholder designation: H07 Compatible with indexable turning inserts FAQ Is this holder compatible with standard DCMT inserts? Yes. The SDJCL 1616 clamping holder accepts DCMT 0702 indexable inserts and is prepared for standard seat geometry. What does left‑hand orientation mean for setup? Left‑hand orientation means the cutting edge faces and cuts towards the left when viewed from the spindle front; the holder is intended for left‑hand turning operations. Which screw and key secure the insert? The insert clamp is held with a M2.5x5.5 Torx screw; a T8 key is specified for correct torque and repeatable clamping. Can this holder be used on compact lathes? Yes. The 16 x 16 mm shank and 100 mm overall length make the holder suitable for compact lathe toolposts and smaller CNC turret stations. What are the dimensional references to check before ordering? Check shank size (16 x 16 mm), cutting height (18 mm) and head width (20 mm) to ensure alignment with the machine’s tool offset and turret capacity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak. No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Klemmhalter 95° DWLNL 1616 H06 For WN-- 0604 Indexable Inserts Innenkühlung Linksschneidend - Teknik Makina
Take advantage of the combination of precise seating, left‑hand orientation and a compact 16 x 16 mm shank for reliable turning performance; order the component directly via Metav Werkzeuge or consult our specialists for application advice. DWLNL 1616 clamping toolholder (D328TM) — Left‑hand toolholder for WN-- 0604 indexable inserts, 95° cutting angle DWLNL 1616 clamping toolholder designed for left‑hand turning applications, accepting WN-- 0604 indexable inserts for controlled chip formation and consistent finish Left‑hand orientation for precision turning 16 x 16 mm shank for stable clamping Accepts WN-- 0604 indexable inserts 95° cutting angle for controlled chip flow Reliable clamping and precise insert seating for consistent turning The holder provides stable clamping through a compact 16 x 16 mm shank, combined with a cutting head width of 20 mm and a cutting height of 26 mm, which together reduce vibration and enable repeatable tool positioning. This construction transfers cutting forces efficiently into the toolpost, resulting in improved surface quality and more predictable insert wear. The ISO designation DWLNL 1616 indicates standardised geometry for easy replacement and consistent set‑up across the workshop, shortening changeover times and supporting uninterrupted production. Optimised geometry for left‑hand operations and controlled chip evacuation Designed for left‑hand cutting, the toolholder features a 95° cutting angle that promotes a stable engagement geometry and predictable chip flow when used with WN-- 0604 inserts. The combination of insert form and toolholder angle helps direct chips away from the workpiece and cutting edge, which assists in heat management and prolongs insert life. For operations where cutting direction and chip control determine process stability, this configuration provides a pragmatic balance between material removal rate and surface integrity. Seamless workshop integration and dependable handling for everyday use With an overall length of 100 mm and a weight of 0.229 kg, the holder integrates easily into standard tool stations and turning centres without requiring extensive fixture changes. Compatibility with H06‑designation boring bars supports straightforward retrofitting into existing setups. The compact dimensions make storage and handling simpler, while the measured build quality reduces the risk of unexpected downtime. When combined with a reliable supplier network, this component contributes to a more resilient production chain and predictable scheduling. Contact Metav Werkzeuge for personalised application advice and to arrange supply of the DWLNL 1616 clamping toolholder (SKU D328TM) via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D328TM Manufacturer: Teknik Makina Designation: Klemmhalter / DWLN for WN-- Indexable Inserts ISO designation: DWLNL 1616 Suitable for inserts: WN-- 0604 Facts Shank width: 16 mm Holder height: 16 mm Cutting‑head width: 20 mm Cutting height: 26 mm Cutting angle: 95° Overall length: 100 mm Weight: 0.229 kg Special features Left‑hand cutting direction Compatible with H06 boring‑bar designation Accepts WN-- 0604 indexable inserts Compact, standardised DWLNL 1616 geometry FAQ What insert type is compatible with this toolholder? The toolholder accepts WN-- 0604 indexable inserts; the DWLNL 1616 geometry is matched to that insert size for correct seating and clamping. Is the holder suitable for left‑hand turning only? Yes, the toolholder is intended for left‑hand cutting; its geometry and 95° cutting angle are optimised for that orientation. What are the key dimensions to check for machine compatibility? Important measures include the 16 x 16 mm shank, the cutting height of 26 mm and the overall length of 100 mm; these determine clearance and toolpost compatibility. Which boring‑bar designation fits this holder? The component is compatible with the H06 boring‑bar designation, enabling straightforward integration into many standard set‑ups. Can the toolholder improve insert life and surface finish? By providing stable clamping and an optimised cutting angle, the holder helps reduce vibration and manage chips, which supports longer insert life and more consistent surface results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Klemmhalter 95° SCLCL 1616 H09 for CC-- 09T3 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of compact dimensions, stable clamping and a 95° cutting angle for consistent external turning results; order the SCLCL 1616 toolholder via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter SCLC for CCMT Indexable Inserts — Teknik Cutting Tools SCLCL 1616, left‑hand, 95° The Klemmhalter SCLC for CCMT Indexable Inserts is a left‑hand clamping toolholder designed for external turning with CC-- 09T3 / CCMT indexable inserts in CNC and manual lathes Left‑hand turning orientation SCLCL 1616 shank, 16 x 16 mm Compatible with CC-- 09T3 CCMT inserts Consistent seating for repeatable cuts A reliably engineered clamping seat delivers repeatable results even in batch production. The SCLCL 1616 geometry ensures accurate insert positioning so that each cut starts from the same datum; this reduces set‑up time and minimises rework. With a defined 95° cutting angle, the holder is optimised for standard external turning profiles, supporting predictable chip flow and steady surface finish. Emphasis on rigid contact surfaces helps maintain precision across multiple tool changes. Rapid replacement and clear compatibility Designed specifically for CCMT style indexable inserts (designation CC-- 09T3), the holder simplifies insert exchange without compromising clamping integrity. The shank 16 x 16 mm profile (ISO SCLCL 1616) and the declared cutting height 20 mm match common toolpost systems, enabling direct replacement in many setups. The modest total length 100 mm and a weight of 0.215 kg keep centrifugal loads low on rotating assemblies while preserving rigidity during higher feed operations. Compact design that fits standard toolposts A compact head width of 20 mm and overall width of 16 mm make this clamping holder suitable where space is limited or multiple stations are required on a turret. The left‑hand orientation is ideal for operations that require reverse‑direction turning or when arranging tool stations for optimal chip evacuation. The combination of compactness and the 95° approach angle supports both light finishing cuts and more robust profiling, depending on insert grade and machine capabilities. Reliable sourcing and practical service Manufactured by Teknik Cutting Tools and distributed by Metav Werkzeuge, this toolholder benefits from a European supply chain focused on dependable delivery and technical guidance. The robust ISO‑based design reduces uncertainty at procurement and supports standardisation across a machine park. For enquiries about fitting, insert grades or suitability for a specific turning task, Metav’s consultants can provide targeted recommendations based on workshop requirements and production goals. For tailored advice or to procure the Teknik Cutting Tools SCLCL 1616 clamping holder, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and lead times from Emmerich. Technical data Article number: D406TM Manufacturer: Teknik Cutting Tools Product name: Klemmhalter SCLC for CCMT Indexable Inserts ISO designation: SCLCL 1616 Core dimensions Height: 16 mm Width: 16 mm Head width: 20 mm Cutting height: 20 mm Total length: 100 mm Weight: 0.215 kg Cutting angle: 95° Compatibility & features For CC-- 09T3 / CCMT inserts ISO type SCLCL 1616 Shank designation H09 Left‑hand cutting direction FAQ Which inserts fit this toolholder? The toolholder accepts CC-- 09T3 format inserts (CCMT indexable inserts); the SCLCL 1616 interface is matched to that insert family for secure clamping. Is this a left‑hand or right‑hand holder? This model is a left‑hand turning toolholder; the SCLCL 1616 geometry and approach angle are configured for left‑hand external turning operations. What are the main dimensions to check for machine compatibility? Key dimensions are the shank/profile 16 x 16 mm, head width 20 mm, cutting height 20 mm and total length 100 mm; confirm these against the turret or toolpost envelope. Can this holder be used for finishing and roughing? The holder’s rigid design and 95° cutting angle allow both finishing and moderate roughing when paired with the correct CCMT insert grade and appropriate cutting parameters. Who manufactures and distributes the product? The clamping holder is manufactured by Teknik Cutting Tools and offered via Metav Werkzeuge; see the manufacturer details below for full contact information. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Precision Toolholder SVJB for VBMT 1103, Internal Coolant, Left-Hand Cutting, 93° - SVJBL 1616 - H11-IK - Teknik Makina
Benefit from secure clamping and internal coolant for consistent left-hand turning performance; the compact 16 × 16 mm shank and 100 mm overall length support repeatable setups in production. Order directly via Metav Werkzeuge or consult our team for application advice. Klemmhalter SVJB for VBMT Indexable Inserts – internal coolant, 16 × 16 mm – Teknik Makina A sturdy SVJB for VBMT Indexable Inserts clamping holder engineered for left-hand turning operations, offering through-coolant capability and precise insert retention for industrial and workshop turning tasks. Secure clamping for VBMT 1103 inserts Internal coolant supply for enhanced cooling Compact 16 × 16 mm shank, 100 mm length Left-hand cutting orientation with 93° angle Precise insert retention for predictable results The clamping system delivers a stable and reproducible hold for VBMT 1103 indexable inserts, reducing vibration and enabling consistent cutting geometry across batches. Thanks to the robust clamp design and the SVJBL 1616 ISO designation, set-up times are shortened and tool runout is minimised, which supports repeatable surface finishes and dimensional accuracy on turned parts. This stability is particularly valuable in serial production and small-series machining where process reproducibility is crucial. Through-coolant design reduces heat and improves chip control Integrated internal coolant channels feed cutting fluid directly to the cutting zone, promoting effective heat dissipation and improved chip evacuation. The holder uses a M2.5x6.5 Torx screw secured with a T8 key, ensuring reliable fixation while allowing straightforward maintenance. The coolant feed and secure screw arrangement contribute to longer insert life and fewer unplanned tool changes, translating into higher machine uptime and lower tooling consumption per part. Compact dimensions for flexible machine integration With a 16 × 16 mm shank, 100 mm overall length and a total height of 16 mm, this clamping holder fits compact tool turrets and live housings without compromising rigidity. The cutting head width of 20 mm and a cutting height specified at 35 mm provide a practical working envelope for standard turning applications, while the 93° cutting angle and left-hand orientation make the product suitable for conventional left-hand turning cycles. The unit’s weight of 0.17 kg facilitates predictable balance and minimal inertial influence on rapid tool changes. Suitable for shop floors and industrial settings Designed for mechanics, maintenance workshops and production environments, the holder supports straightforward insert exchange and is compatible with common turret systems when the H11-IK clamping bar is employed. The combination of compact size, coolant capability and standard fastening means operators benefit from efficient cycle times and reduced thermal distortion during medium-duty to heavy finishing cuts. The tool is a practical choice where reliable left-hand turning and process stability are priorities. For reliable left-hand turning operations with Teknik Makina clamping holders, contact Metav Werkzeuge for supply and expert application guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AP552TM Manufacturer: Teknik Makina Designation EN: SVJB for VBMT Indexable Inserts ISO designation: SVJBL 1616 Compatible inserts: VBMT 1103 Facts Shank width: 16 mm Total height: 16 mm Cutting-head width: 20 mm Cutting height: 35 mm Overall length: 100 mm Weight: 0.17 kg Cutting angle: 93° Special features Internal coolant Torx screw: M2.5x6.5 Torx key: T8 Clamping bar designation: H11-IK Left-hand cutting direction FAQ Which insert sizes are compatible with this clamping holder? The clamping holder is specified for VBMT 1103 inserts and is designed to secure those indexable inserts reliably in a left-hand turning configuration. Is coolant supply integrated in the holder? Yes, the holder features internal coolant, which directs cutting fluid to the tool tip to improve cooling and chip evacuation during machining. What are the critical dimensions for machine compatibility? Key dimensions include a 16 × 16 mm shank and 100 mm overall length; these values help determine whether the holder fits a given turret or tool post. How is the insert fastened and which tools are required for maintenance? Insert clamping uses a Torx screw M2.5x6.5, which is tightened or released with a T8 Torx key for secure and repeatable fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Precision coolant delivery for demanding turning operations
Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.
How they work and where they help most
Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.
Key facts
| characteristic | detail |
|---|---|
| category | tool holders with internal coolant |
| common synonyms | internal coolant toolholders; coolant-through tool holders |
| typical application | turning, heavy machining, internal bore finishing |
| coolant routing | internal channels and boreholes delivering coolant to the insert seat |
| key technical effect | direct cooling at the cutting edge, improved chip evacuation, reduced thermal load |
| comparison | standard holders use external nozzles; internal coolant holders route coolant through the shank |
Measurable benefits for production
- Direct coolant feed reduces the thermal stress on the insert, extending tool life.
- Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
- More consistent cooling helps achieve better surface finish and dimensional stability.
- Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.
Metav: precision supply and industrial competence
Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.
In short
Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.
FAQ
When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.
Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.
What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.
How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com