Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
63mm Face Milling Cutter for RDMT 12T3 Indexable Inserts, 6 Teeth, 40mm Overall Length - Teknik Makina
Take advantage of a compact, high‑throughput milling solution that combines a 63 mm cutting diameter with 6 cutting edges for consistent stock removal; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Indexable insert face mill T285TM – 63 mm, 6‑edge cutter by Teknik Makina The Indexable insert face mill T285TM is a compact face‑milling cutter engineered for efficient metal‑removal tasks using RDMT 12T3 indexable inserts, ideal where stable clamping and quick insert changes are required 63 mm cutting diameter 6 cutting edges for steady removal Shank Ø 22 mm for secure clamping Compatible with RDMT 12T3 inserts Greater throughput from a compact cutter head With a 63 mm diameter and 6 cutting edges, this face mill delivers a favourable balance between material removal and surface control. The distribution of multiple cutting edges reduces load per insert, which leads to smoother cutting and extended insert life. For operations where fixture space is limited, the compact geometry supports efficient face milling without compromising removal rates. The result is a tool that promotes process reliability and predictable cycle times. Quick, secure insert changes to cut downtime The head accepts RDMT 12T3 indexable inserts and uses a M3.5 locking screw with a M3.5x8.5 Torx screw (Torx key T15) for fixation. This standardised fastening enables rapid, repeatable insert replacement and simple torque control, so tool changeovers are fast and reproducible. Indexable inserts allow worn edges to be rotated or replaced without regrinding, reducing maintenance time and keeping machines productive. Stable clamping and consistent running accuracy A Ø 22 mm shank and compact overall length (40 mm) provide a rigid connection to the spindle, helping to minimise vibration and improve surface finish. The cutter’s mass (0.5 kg) is distributed to favour stability in short overhang setups, which contributes to dimensional consistency across workpieces and reduces the need for secondary finishing steps. Designed for adaptable face‑milling in confined setups The modular concept supports a wide range of face‑milling tasks in workshops and production lines where space, accessibility and changeover speed matter. The use of industry‑standard RDMT inserts permits selection of grades and geometries to match machining strategies. This tool is therefore suitable for manufacturers seeking compact, changeable tooling that fits into existing machining cells and clamping solutions. Supply reliability and partner support for production continuity Sourcing through an experienced partner ensures steady availability and technical guidance. Metav’s position as a precision partner and distributor supports dependable delivery and a broad accessory range, while proven logistics from Emmerich help to avoid supply interruptions. For machining teams focused on throughput and predictability, a combination of sturdy cutter design and reliable supply forms the backbone of sustained production. For tailored advice on Teknik Makina’s T285TM face mill and to secure prompt supply from Metav Werkzeuge in Emmerich, please call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T285TM Brand: Teknik Makina Designation: Indexable insert face mill For inserts: RDMT 12T3 eClass: 21180902 ETIM: EC011860 Facts Diameter: 63 mm Cutting edges: 6 Shank / mounting diameter: 22 mm Overall length: 40 mm Weight: 0.5 kg Torx screw: M3.5x8.5 Locking screw: M3.5 Torx key size: T15 Special features Compatible with RDMT 12T3 indexable inserts Compact face‑milling geometry Files: 62de7ef10f56dbb4de4dbf61, 62de7e670f56dbb4de4dbf15 SKU: T285TM FAQ What type of inserts does the cutter use? The face mill accepts RDMT 12T3 indexable inserts for repeatable performance and easy edge indexing. How are the inserts secured in the cutter head? Inserts are fastened with M3.5x8.5 Torx screws and a M3.5 locking screw; a T15 Torx key is used for assembly and torque control. Is the tool suitable for short‑overhang setups? Yes, the compact overall length of 40 mm and a Ø 22 mm shank support rigid clamping and reduced vibration in confined setups. Which brand and SKU should be referenced when ordering? Order using the SKU T285TM from Teknik Makina; citing the model ensures the correct indexable insert face mill is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Cutter for RPMT 1606 Indexable Inserts With Internal Coolant, 5 Teeth - Teknik Makina
Take advantage of a compact, purpose-built milling head that combines a 63 mm cutting diameter, internal coolant and compatibility with RPMT 1606 indexable inserts to keep cycle times reliable and setup straightforward; order the (Rundplattenfräser T717-1TM) directly via Metav Werkzeuge or ask our consultants if needed. Rundplattenfräser — 63 mm indexable insert milling cutter for RPMT 1606 (Teknik Makina) The Rundplattenfräser is a compact indexable insert milling head designed for face and shoulder milling applications, accepting RPMT 1606 inserts and equipped with internal coolant for improved heat control and chip evacuation. Internal coolant for improved chip evacuation 63 mm diameter for versatile face milling Compatible with RPMT 1606 indexable inserts Faster, more consistent metal removal for production work This milling head is engineered to raise throughput by providing a stable cutting platform: the 63 mm diameter and 5 cutting edges distribute cutting forces evenly, reducing vibration and promoting steadier feeds. The cutter accepts standard RPMT 1606 indexable inserts, which simplifies inventory management and reduces downtime for insert changes. For production environments and jobbing shops where predictable cycle times matter, the combination of a balanced geometry and a compact overall length ensures effective material removal without excessive spindle load. Direct coolant delivery and improved chip control extend tool life Integrated internal coolant channels deliver fluid directly to the cutting zone, which lowers cutting temperatures and helps evacuate chips from the kerf. This focused cooling reduces thermal wear on the insert edges and supports a more consistent surface finish on workpieces. When used with compatible inserts — for example, Korloy RPMT 1606 grades — the head achieves a balance between cutting performance and insert longevity, making maintenance intervals more predictable and reducing the frequency of unscheduled stoppages. Simple integration into workshop and CNC setups Designed with practical installation in mind, the head’s 40 mm overall length and modest mass (approx. 0.509 kg) make it easy to fit into existing tool magazines and arbor systems without major adjustments. The tool comes as SKU T717-1TM and is manufactured by Teknik Cutting Tools, so specifying it in tooling lists is straightforward. Basic familiarity with indexable insert systems is sufficient to change inserts quickly; the robust design supports both manual and automated change routines, helping to keep set-up times short and production steady. For precise face milling with internal coolant, request the Teknik Makina T717-1TM via Metav Werkzeuge in Emmerich — contact our technical sales team for a tailored recommendation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T717-1TM Label: 63mm Rundplattenfräser RPMT 1606 L40mm mit Innenkühlung Product type: Rundplattenfräser Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.509 kg Cutting edges: 5 Eclass: 21180902 Special features Internal coolant Compatible with RPMT 1606 indexable inserts Recommended insert supplier: Korloy Suitable application: face/shoulder milling FAQ Which inserts fit this milling head? The T717-1TM accepts RPMT 1606 indexable inserts; Korloy grades are listed as compatible for balanced wear and performance. Is the tool suitable for automated tool changers in CNC machines? Yes, the Rundplattenfräser from Teknik Makina (SKU T717-1TM) has a compact form and controlled mass, making it suitable for integration into automated tool systems. How does internal coolant benefit machining with this cutter? Internal coolant on the T717-1TM directs fluid to the cutting edge, improving chip control and reducing insert temperature during face milling operations. What are the main measurable specifications to consider for setup? Key figures for setup are 63 mm diameter, 40 mm overall length and a weight of 0.509 kg, all listed for the Teknik Makina milling head. For which tasks is this milling head primarily intended? The T717-1TM is designed for face and shoulder milling tasks where stable cutting and easy insert changes with RPMT 1606 inserts are advantageous. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Cutter For RPMW 1204 Indexable Inserts, 5 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of a robust milling solution with a Ø 63 mm cutter compatible with RPMW 1204 indexable inserts and a 22 mm shank for rigid mounting; this combination delivers steady metal removal and straightforward insert changes. Order directly via Metav Werkzeuge or consult our specialists for application advice. Round indexable face mill — for RPMW 1204 indexable inserts by Teknik Makina, Ø 63 mm, 5 cutting edges The Round indexable face mill is a compact, high-stability cutter intended for medium to heavy milling operations with RPMW 1204 inserts, suitable for workshops and production environments Ø 63 mm cutting diameter Accepts RPMW 1204 inserts (Korloy compatible) Five cutting edges for stable material removal 22 mm shank for rigid mounting Higher throughput with consistent surface results The tool’s Ø 63 mm diameter and five cutting edges enable an improved metal removal rate while maintaining a consistent surface finish. Using standard RPMW 1204 indexable inserts reduces changeover time and keeps cycle times predictable; the insert geometry provides balanced cutting forces that help prevent chatter and extend productivity on batch runs. For CNC applications the combination of insert repeatability and cutter stability translates into fewer rework cycles and more predictable process outcomes. Secure clamping and simple indexable insert changes A 22 mm shank ensures a rigid connection to standard tool holders, reducing runout and vibration during heavy cuts. Insert retention uses a M4x7 Torx screw with a T15 key, enabling quick, repeatable insert replacement and minimising non-productive time. Compatibility with Korloy RPMW 1204 inserts means a broad choice of grades and coatings for specific materials — a practical advantage when switching between aluminium, steel or mixed-material batches in a job shop. Built for workshop integration and tool-life optimisation Constructed for regular industrial use, the cutter suits frequent insert indexing and planned maintenance schedules; the modular nature of indexable systems reduces tooling spend compared with solid‑carbide alternatives. By combining a standard insert size with a compact cutter body, this solution supports inventory rationalisation and faster reaction to changing production demands. The overall design focuses on reliability and serviceability, helping maintain uptime and predictable output in a busy machining environment. For reliable delivery or technical matching, request the TekniK Makina face mill through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid supply from Emmerich Technical data Article number: T712TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Facts Diameter: 63 mm Overall height: 40 mm Number of cutting edges: 5 Shank diameter (aufnahme): 22 mm Special features For RPMW 1204 indexable inserts Compatible with Korloy RPMW 1204 inserts Torx key size: T15 Torx screw: M4x7 FAQ What insert type does this cutter accept? The cutter accepts RPMW 1204 indexable inserts; compatible grades from Korloy are commonly used for different materials. How is an insert secured in the cutter? Inserts are fastened with an M4x7 Torx screw using a T15 key, allowing straightforward, repeatable insert changes. Which shank size is required for mounting? A 22 mm shank is required; the design provides a rigid connection to standard holders for reduced runout. Is this cutter suitable for heavy machining? With its five cutting edges and rigid body, the tool is appropriate for medium to heavy milling where stable cutting forces are needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Cutter for WNMX 1305 Indexable Inserts L50mm Internal Coolant - Teknik Makina
Benefit from a reliable combination of efficiency and secure clamping: the 63 mm cutter head with internal coolant and four cutting edges gives stable face milling and extended insert life. Order the tool via Metav Werkzeuge or contact the advisers for specification support and delivery from Emmerich. Planing cutter head T687-1TM – 63 mm diameter, internal coolant (Teknik Makina) Planing cutter head for WNMX 1305 indexable inserts, designed for precise face milling with internal coolant and four cutting edges 63 mm diameter for stable face milling Internal coolant supply for improved chip evacuation Suitable for WNMX 1305 Korloy indexable inserts Four cutting edges for higher material removal rates Improved machining performance through optimised geometry The 63 mm diameter body and four cutting edges are combined to deliver a consistent cutting profile and higher material removal per pass. By using standard WNMX 1305 indexable inserts the assembly enables rapid insert replacement and predictable tooling costs. The tool body’s balanced dimensions and compact overall length of 50 mm reduce vibration during facing operations, which supports a smoother surface finish and longer insert life. This rational setup benefits production workflows where cycle time and repeatability are decisive. Coolant-fed design and secure fastening for uptime An integrated internal coolant channel directs cutting fluid close to the cutting zone, supporting effective chip evacuation and thermal control; this reduces wear on insert edges and helps maintain machining tolerances. Fastening relies on a Torx T15 drive and M4x10 screws, ensuring repeatable clamp force and straightforward maintenance. The compact mass (approx. 0.752 kg) together with the precise clamping system simplifies tool changes and contributes to consistent spindle loads during high-precision facing tasks. Compatibility and workshop integration for efficient tooling management The cutter head is configured for Korloy-specified WNMX 1305 inserts, allowing immediate integration into existing indexable-insert inventories and minimising tool-change complexity. The unit’s SKU T687-1TM identifies the variant for procurement and inventory control. As a robust component from Teknik Makina, this cutter body supports standardised production procedures and reduces setup variability, making it suitable for serial facing, skimming and light surfacing operations where predictable results and throughput are priorities. For specification advice or to secure the Teknik Makina 63 mm cutter head T687-1TM, contact Metav Werkzeuge in Emmerich for professional guidance and reliable supply Technical data Article number: T687-1TM Product type: Planing cutter head Compatible inserts: WNMX 1305 Compatible insert manufacturer: Korloy Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 50 mm Shank / bore diameter: 22 mm Cutting edges: 4 Weight: 0.752 kg ECLASS: 21181015 Special features Internal coolant Torx key: T15 Torx screw: M4x10 For WNMX 1305 indexable inserts SKU: T687-1TM FAQ Which indexable inserts fit this cutter head? The planing cutter head accepts WNMX 1305 indexable inserts; compatibility is specified for Korloy inserts and identified by SKU T687-1TM. Is coolant delivered to the cutting edge? Yes, the cutter body features internal coolant that feeds the cutting zone to support chip evacuation and reduce insert wear. How many cutting edges does the tool have? The tool body is equipped with four cutting edges, enabling increased material removal and efficient facing cycles. What fastening components are required for insert mounting? Insert clamping uses a Torx T15 drive with M4x10 screws, providing secure and repeatable fixation. Can this cutter head be used with existing Korloy inserts in stock? The head is designed for WNMX 1305 inserts from Korloy, allowing direct use of compatible inserts already held in inventory. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Cutter Head for APKT 1604 and APXT 1003 Indexable Inserts, 6 Cutting Edges, 75° Cutting Angle, 22mm Shank - Teknik Makina
Take advantage of a compact Ø63 mm diameter and 6 cutting edges for efficient face milling; the secure Torx fastening (M2.5x7 / T8) and a 22 mm bore ensure rigid clamping and reliable chip control — order via Metav Werkzeuge or consult the product specialists if required. Face milling head for APKT 1604 and APXT 1003 indexable inserts — Teknik Makina Face milling head designed for heavy-duty face milling operations with modern indexable inserts Compact Ø63 mm cutter head Accepts APKT 1604 and APXT 1003 inserts Six cutting edges for efficient cut Torx M2.5x7 fastening with T8 key Increased throughput with compact, rigid tooling The compact milling head delivers measurable productivity gains thanks to its Ø63 mm diameter combined with a short overall length of 45 mm, which reduces overhang and improves stiffness on the spindle. A 22 mm bore ensures a secure fit to the toolholder, lowering vibration and enabling higher stable feed rates. With 6 cutting edges, the toolhead supports sustained material removal while maintaining predictable tool life. These characteristics translate into shorter cycle times and fewer interruptions on the shop floor, making the component particularly suitable where consistent face milling performance is required. Reliable clamping and swift insert changes Secure clamping is achieved by the specified Torx assembly: M2.5x7 fixing screws tightened with a T8 key. This combination ensures consistent repeatability after insert changes and reduces the risk of movement under load. The head is engineered for common indexable geometries and is compatible with APKT 1604 and APXT 1003 types, including inserts from Korloy, which simplifies stockkeeping and tool preparation. The design supports quick replacement of cutting edges, helping to keep machine downtime to a minimum and supporting predictable production planning. Compact mass and pragmatic shop-floor benefits At just 0.63 kg, the milling head is light enough to limit additional spindle load yet robustly constructed to withstand regular machining cycles. The modest mass, paired with the reduced tool overhang, contributes to lower spindle wear and improved surface finish consistency. The installed 75° cutting angle helps achieve effective chip formation on typical face-milling routines, while the geometry supports both roughing passes and medium-finish operations without complex setup changes. Compatibility-focused design for efficient tooling systems Created as an indexable-insert holder, the head accepts APKT-style plates and is also listed for APKT 1003 variants, offering flexibility across similar insert formats. The specified interface dimensions and fastening standard allow integration into existing tool sets without the need for bespoke holders. For procurement and workshop managers, this means simplified inventory, fewer toolholders to maintain and a direct route to replacing wear items with a component that aligns with widely used insert standards. For reliable supply of this Teknik Makina face milling head (SKU T452TM) and tailored advice on integrating it into an existing tooling set, contact Metav Werkzeuge — our consultants in Emmerich will assist with selection and delivery. Technical Data Article number: T452TM Manufacturer: Teknik Makina Product: Face milling head Compatibility: for APKT 1604 and APXT 1003 indexable inserts Compatible insert manufacturer: Korloy Facts Diameter: 63 mm Cutting edges: 6 Overall length: 45 mm Bore / shank diameter: 22 mm Weight: 0.63 kg Cutting angle: 75° Special features Torx screw M2.5x7 Torx key T8 required Suited for APKT 1003 insert type ECLASS: 21181015 FAQ Which insert types fit this milling head? The face milling head is designed for APKT 1604 and APXT 1003 indexable inserts; it is also suitable for APKT 1003 plate formats and compatible with Korloy insert geometries. What fastening hardware is required for installation? Assembly uses M2.5x7 Torx screws tightened with a T8 key as specified for the Teknik Makina head (SKU T452TM). How does the 22 mm bore benefit machining performance? A 22 mm bore provides a rigid interface with the toolholder, reducing vibration and enabling more stable cutting conditions for improved surface finish and tool life. What are the principal dimensions and mass of the tool? Key dimensions are Ø63 mm diameter, 45 mm overall length, and a mass of 0.63 kg, supporting compact setups with limited overhang. Can this head be used for both roughing and finishing? Yes. The geometry and 75° cutting angle provide versatility for robust material removal as well as medium-finish operations when paired with appropriate inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Face Milling Cutter Head for BLMP 0904 Indexable Inserts, 7 Cutting Edges, 100° Rake Angle, Ø22mm Mount - Teknik Makina
Benefit from precise face milling with a compact, robust head that accepts BLMP 0904 indexable inserts; the combination of a 63 mm diameter and seven cutting edges delivers consistent material removal and reduced downtime. Order directly via Metav Werkzeuge or ask our consultants for application advice. Planmesserkopf T487TM — face-milling head for BLMP 0904 indexable inserts, Ø63 mm, 7 edges (Teknik Makina) A Planmesserkopf engineered for reliable face milling and straightforward integration on machines using BLMP 0904 indexable inserts. Compatible with BLMP 0904 indexable inserts 63 mm diameter for efficient face milling Seven cutting edges for improved productivity M3.5 Torx clamping screw, T10 key size Consistent cutting performance and process stability The milling head is designed to deliver dependable results in face-milling operations. With a 63 mm diameter and a 100° cutting angle, the tool provides a broad engagement area that spreads cutting forces and supports stable chip formation. Fitted for BLMP 0904 indexable inserts, the head’s geometry helps maintain a uniform surface finish and repeatable results across multiple workpieces. The relatively low mass of 0.615 kg contributes to rotational balance, lowering vibration and promoting longer tool life. Secure clamping and easy maintenance A reliable clamping system reduces unplanned stoppages: the unit uses an M3.5 Torx clamping screw (size M3.5x8.5) and requires a T10 key for insert retention. This standardised fixing method ensures firm seating of the insert and straightforward replacement when a cutting edge is exhausted. The design minimises maintenance time while preserving cutting stability, enabling rapid insert changes without specialised fixtures or time-consuming procedures. Designed for productive machining environments The head’s compact 50 mm overall length and 22 mm arbor interface support versatile setup options on milling spindles and toolholders. Offering seven cutting edges, the tool extends the service interval between indexings and reduces inventory turnover for inserts. Compatibility with Taegutec BLMP 0904 inserts provides access to widely available insert grades and geometries, simplifying procurement and allowing easy optimisation for specific materials or cutting conditions. Practical application notes and integration Intended for face-milling tasks using indexable inserts, the head suits CNC milling and multifunction machining centres where reliable repeatability and quick tool changes are required. The 22 mm attachment diameter ensures a rigid connection to the toolholder, while the nominal dimensions make it straightforward to balance and set up. For specific machine interfaces or advanced balancing requirements, consult the technical advisors at Metav Werkzeuge to match spindle and clamping conditions to production needs. For Teknik Makina quality and practical advice on selecting the right face-milling head for your production, contact Metav Werkzeuge — reach the team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss supply from our Emmerich stock Technical Data SKU: T487TM Manufacturer: Teknik Makina Product name: Planmesserkopf T487TM Compatible inserts: BLMP 0904 Compatible insert manufacturer: Taegutec Facts Diameter: 63 mm Shank / arbor diameter: 22 mm Weight: 0.615 kg Cutting edges: 7 Overall length: 50 mm Cutting angle: 100° Special features For BLMP 0904 indexable inserts M3.5x8.5 Torx clamping screw Torx key size T10 Compact design for stable face milling FAQ Which inserts fit this milling head? The milling head is specified for BLMP 0904 indexable inserts; insert grades from Taegutec that use the BLMP 0904 form are compatible. What is the arbor or shank diameter for mounting? The tool accepts a 22 mm attachment interface as stated in the specification. How many cutting edges does the head provide and what is the benefit? The head features seven cutting edges, which extends the usable life per index and reduces the frequency of insert changes during production. Which clamping screw and key size are required for insert retention? Clamping is via an M3.5x8.5 Torx screw; the corresponding key size is T10. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Cutter SDMT 1204 Indexable Inserts L40mm Internal Coolant - Teknik Makina
Take advantage of a robust 63 mm diameter milling solution with internal coolant and a compact 40 mm overall length for reliable face cutting. The combination of a 45° cutting angle and five insert positions ensures efficient material removal and improved surface finish — order this tool via Metav Werkzeuge or consult our specialists for application support. Face milling head for SDMT 1204 indexable inserts — 63 mm, internal coolant (Teknik Makina) The face milling head is a compact cutting tool designed for use with SDMT 1204 indexable inserts, delivering controlled face milling and finishing operations where coolant-through capability and a 45° cutting geometry improve productivity. 63 mm diameter for stable cutting Internal coolant through tool body Compatible with SDMT 1204 inserts Compact 40 mm overall length Higher throughput with predictable cutting performance The milling head’s 63 mm diameter and 45° cutting angle are engineered to reduce cutting forces while maintaining high metal removal rates. The tool accepts SDMT 1204 indexable inserts, arranged across five cutting positions to distribute load and extend uptime between indexings. With internal coolant, chip evacuation and edge cooling occur directly at the cutting zone, which leads to longer insert life and more stable surface quality. For production environments seeking measurable increases in machining consistency, this solution supports reproducible cycle times and fewer unscheduled tool changes. Simple servicing and secure fastening for smooth operation Maintenance is straightforward: insert clamping uses proven screw technology with M4x10 fixing screws and a Torx T15 drive for positive engagement and repeatable torque application. The compact 40 mm overall length keeps the cutter close to the spindle, reducing overhang and minimising vibration, while the tool’s 0.421 kg mass lowers spindle load during rapid direction changes. These practical design choices reduce setup time and make insert replacement fast, ensuring minimal production interruption and predictable tool life. Clear integration and wide application potential Designed as a modular head suitable for conventional face milling tasks, the cutter integrates easily into existing toolholders and setups that accept standard milling heads for indexable inserts. Compatibility with ZCC-manufactured inserts simplifies procurement and spare-part logistics. The head’s straightforward functional design, including internal coolant and standard fixing hardware, allows the tool to be specified with confidence for workshops and production lines that prioritise dependable performance and easy maintenance. Technical terms such as “indexable insert” refer to replaceable cutting tips; these are rotated or replaced when worn, rather than replacing the entire tool body, which reduces tooling cost over time. For reliable face milling with coolant-through performance, contact Metav Werkzeuge for tailored advice and fast supply direct from Emmerich. Technical data SKU: T359-1TM Product type: Face milling head Model: Planmesserkopf for SDMT 1204 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.421 kg Number of cutters: 5 Cutting angle: 45° Special features Internal coolant: yes Compatible inserts: SDMT 1204 Compatible insert brand: ZCC Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this milling head? The milling head accepts SDMT 1204 indexable inserts; compatible insert brands include ZCC, as stated in the product data. Is internal coolant available and how does it help? Yes — the tool features internal coolant that directs fluid to the cutting edge, improving chip removal and extending insert life. What fastening hardware is required for insert replacement? Insert clamping uses M4x10 screws with a Torx T15 drive for secure, repeatable fastening. What are the key dimensions for machine setup? Important dimensions are 63 mm diameter and 40 mm overall length, which help define spindle clearance and overhang. What is the SKU for ordering and reference? The product is listed under SKU T359-1TM for ordering and stock queries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for 100° ENMX 0604 Indexable Inserts, 7 Cutting Edges, 22mm Shank - Teknik Makina
Taking advantage of the compact design, high cutting stability and simple insert replacement delivers reliable facing results in confined setups; order the head directly via Metav Werkzeuge or consult the technical team for application advice. Teknik Makina Facing Cutter Head T765TM — for 100° ENMX 0604 indexable inserts, Ø63 mm A Teknik Makina facing cutter head designed for precise face milling with ENMX 0604 indexable inserts, offering a compact diameter and a secure 22 mm interface for small- to medium-sized milling operations Compact Ø63 mm head for tight setups Seven cutting edges for consistent finish Compatible with ENMX 0604 indexable inserts 22 mm shank and M2.5x7 Torx screws for secure fit Precision result through optimised cutting geometry The facing head is engineered around a 100° cutting angle and seven cutting edges, which together reduce cutting forces and promote a uniform surface finish. The combination of a relatively small outer diameter and a large number of edges lowers individual chip load, making the tool suitable for finishing passes where dimensional consistency and surface quality are priorities. The construction ensures stable engagement even when working in restricted clamping envelopes, so process reliability is improved without sacrificing surface standards. Secure mounting and fast insert service for efficient turnarounds A firm mechanical interface is provided by the 22 mm shank and the specified M2.5x7 Torx screws with a T8 key, enabling repeatable seating and straightforward reassembly after insert changes. Compatibility with YG-1 manufactured inserts of type ENMX 0604 allows rapid supply sourcing and interchangeability. Reduced downtime is achieved through this standardised fastening approach, which simplifies maintenance routines and keeps machine utilisation high in production environments. Appropriate fit for compact milling applications Designed for face milling tasks where space is limited, the head’s Ø63 mm outer diameter and overall height of 50 mm make it a compact alternative to larger cutters. The small footprint supports operations on compact milling heads and machines with reduced clearance while still delivering effective material removal for finishing cycles. The tool suits manufacturers and workshops seeking a balance between tool compactness and consistent machining results. Built to industrial standards with distributor assurance Manufactured by Teknik Makina and distributed through Metav Werkzeuge, the head aligns manufacturing know-how with a European quality filter that supports dependable stock and delivery handling. The standardised insert format and robust fastening mean the component integrates into existing tool inventories with minimal adaptation. For purchasers requiring traceable, repeatable tooling performance, this combination reduces supply-chain friction and supports continuous production planning. For reliable facing performance choose the Teknik Makina T765TM via Metav Werkzeuge — contact Metav Werkzeuge for tailored application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: T765TM Manufacturer: Teknik Makina Core dimensions Diameter: 63 mm Overall height: 50 mm Shank / arbor diameter: 22 mm Cutting angle: 100° Number of cutting edges: 7 Features & compatibility For indexable inserts: ENMX 0604 Compatible insert manufacturer: YG-1 Screw type: M2.5x7 Torx key: T8 FAQ Which inserts fit this facing head? The facing cutter head accepts ENMX 0604 indexable inserts; compatibility with YG-1 manufactured inserts is specified for the T765TM head. What is the required toolholder or shank size? A 22 mm shank interface is used for mounting the head; ensure the machine arbor or holder accommodates a 22 mm diameter connection. How are the inserts secured? Inserts are retained with M2.5x7 screws tightened with a T8 Torx key, allowing consistent clamp force and straightforward replacement. What surface finish can be expected from the head? With its 100° cutting angle and seven edges, the head is optimised for low chip load finishing passes, producing uniform surface quality in typical facing operations. Is the head suitable for compact milling machines? Yes, the Ø63 mm diameter and 50 mm overall height make the head suitable for operations where clearance is limited and a compact solution is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for ADKT 1505 Indexable Inserts L45mm With Internal Coolant, T15/M4x10 - Teknik Makina
Take advantage of the combination of robust 63 mm diameter stability, internal coolant for improved chip evacuation and a compact 45 mm overall length to maintain steady face milling cycles; order this milling head via Metav Werkzeuge or consult our specialists for application-specific advice. Face milling head for ADKT 1505 indexable inserts — 63 mm, internal coolant (Teknik Cutting Tools) A face milling head designed for ADKT 1505 indexable inserts, delivering precise face milling with integrated internal coolant for improved tool life and process reliability. 63 mm diameter for stable engagement Internal coolant for improved chip control Five cutting edges for efficient material removal Compatible with ADKT 1505 inserts (ISCAR) Consistent metal removal with compact dimensions This milling head brings steady cutting performance through a balanced design and a 63 mm diameter, which reduces vibration at the cutting zone and supports repeatable surface finishes. The compact 45 mm overall length keeps the cutting forces close to the spindle, enabling more rigid clamping and lower deflection during heavy cuts. These design choices lead to reliable cycle times and reduced rework in production environments where reproducible results matter. Improved chip evacuation and tool life through internal coolant Built with internal coolant, the tool routes cutting fluid directly to the insert pocket to cool the cutting edge and clear chips effectively. Direct fluid delivery decreases thermal load on the insert, which helps to preserve edge integrity and extends the interval between indexings. For machining operations that demand continuous performance, the integrated coolant capability supports longer uninterrupted runs and cleaner workpieces without complex retrofit work. Practical fastening and maintenance details for shop floors The head uses a Torx T15 drive and M4x10 screws for secure insert clamping and straightforward maintenance. The five cutting edges configuration balances material removal rate with surface quality, allowing efficient stock removal on a variety of face-milling tasks. The robust construction and standardised fastening mean insert changes are quick and reproducible, minimising downtime on the shop floor and simplifying tool management. Compatibility and application-ready configuration Engineered for ADKT 1505 indexable inserts and compatible with inserts from ISCAR, the milling head is supplied in a ready-to-fit specification (SKU: T530-1TM). Its modest weight and standard interface make it suitable for a wide range of milling spindles and holders. The result is a practical, industry-aligned solution that integrates with existing tooling systems and supports predictable machining outcomes. For robust face milling performance with internal coolant and ADKT 1505 compatibility, contact Metav Werkzeuge to arrange supply of the Teknik Cutting Tools face milling head (SKU T530-1TM) and request application-specific guidance by email or phone Technical data Article number: T530-1TM Product type: Face milling head Suitable for: ADKT 1505 indexable inserts Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.582 kg Cutting edges: 5 Cutting angle: 90° Screw: Torx T15, M4x10 ECLASS: 21181015 Special features Internal coolant Compatible with inserts by ISCAR Five cutting edges Manufacturer: Teknik Cutting Tools FAQ Is the head compatible with ADKT 1505 inserts? Yes. The face milling head is designed for ADKT 1505 indexable inserts and is supplied as SKU T530-1TM for straightforward identification. Does this head provide internal coolant? Yes. The head features internal coolant to deliver fluid directly to the insert pocket, improving chip evacuation and edge cooling. How many cutting edges does the head use? The milling head is configured for five cutting edges, allowing efficient material removal while maintaining surface quality. Which fastening hardware is required for insert clamping? Insert clamping uses a Torx T15 drive with M4x10 screws as specified for repeatable and secure fastening. What are the principal dimensions to check for machine compatibility? Key dimensions are a 63 mm diameter and a 45 mm overall length; weight is 0.582 kg (SKU T530-1TM), useful for assessing toolholder balance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for BLMP 0603 Indexable Inserts L50mm Internal Coolant, 8 Cutting Edges, T8 Torx - Teknik Makina
Take advantage of a compact, high-performance cutter that combines 63 mm diameter, internal coolant and eight cutting edges for reliable face milling operations; order the component directly via Metav Werkzeuge or consult their specialists for application advice. Face milling head for BLMP 0603 indexable inserts — 63 mm with internal coolant (Teknik Makina) The face milling head for BLMP 0603 indexable inserts is a compact, robust cutter designed for efficient face machining, offering internal coolant delivery and a short 50 mm overall length for stable performance in confined setups. 63 mm cutter diameter Internal coolant supply For BLMP 0603 indexable inserts Eight cutting edges for efficient machining Compatible with Taegutec inserts Precise cutting geometry for consistent material removal The face milling head delivers a controlled cutting action thanks to its 63 mm diameter, eight cutting edges and a 100° cutting angle, which together reduce cycle times while maintaining surface quality. The indexed inserts (BLMP 0603) permit consistent edge replacement without regrinding, so the tool life of the assembly is maximised and downtime for reconditioning is minimised. This results in predictable productivity gains and easier process planning on the shop floor. Coolant-through design to cut heat and improve tool life An integrated internal coolant channel supplies cutting fluid directly to the insert pocket, improving chip evacuation and reducing thermal load at the cutting edge. With a 50 mm overall length and a compact arbor interface, the head supports effective cooling even in tight setups, which helps preserve insert geometry and maintain tolerances over longer production runs. The internal feed also reduces the need for external probing of coolant lines when installing the tool. Secure clamping and straightforward maintenance Insert retention employs a standard M3x6.2 mounting screw tightened with a T8 Torx driver for repeatable clamping force and quick changeovers. The design simplifies insert replacement and inspection, while the modest 0.672 kg weight helps maintain spindle balance and stability during higher-speed passes. Regular checks of screw torque and chip-pocket cleanliness will keep the tool performing reliably without complex maintenance regimes. Broad compatibility and practical application scope Built specifically for BLMP 0603 indexable inserts and compatible with inserts from Taegutec, the head suits general face milling tasks across production and toolroom environments. The compact diameter and short projection make it well suited to operations where clearance is limited but a high material removal rate is still required. The unit is identified under SKU T483-1TM for precise ordering and traceability. For procurement or to discuss application-specific details for the Teknik Makina face milling head with internal coolant, contact Metav Werkzeuge in Emmerich for expert advice and reliable delivery. Technical data SKU: T483-1TM Manufacturer: Teknik Makina eClass: 21181015 Product type: Face milling head Facts Diameter: 63 mm Overall length: 50 mm Arbor / shank diameter: 22 mm Weight: 0.672 kg Cutting edges: 8 Cutting angle: 100° Torx key: T8 Torx screw: M3x6.2 Special features Internal coolant For BLMP 0603 indexable inserts Compatible with Taegutec inserts Short projection for confined setups SKU reference T483-1TM FAQ Which insert type fits this cutter head? The cutter accepts BLMP 0603 indexable inserts; compatibility with Taegutec inserts is stated for the Teknik Makina face milling head (SKU T483-1TM). Is there coolant supply to the cutting edge? Yes — the head features internal coolant, delivering fluid directly to the insert pocket to aid chip evacuation and thermal control. What is the required screw and driver for insert fastening? Inserts are secured with an M3x6.2 screw, tightened using a T8 Torx driver for consistent clamping. What are the key dimensions to check before fitting? Relevant dimensions: 63 mm cutter diameter, 50 mm overall length and 22 mm arbor diameter; confirm these against the machine spindle and fixtures. Will the head affect spindle balance significantly? The unit weighs 0.672 kg; when installed according to spindle and balancing guidelines, the Teknik Makina head maintains running stability for typical face milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head For BLMP 0904 Indexable Inserts L50mm With Internal Coolant, 100° Cutting Angle - Teknik Makina
Take advantage of the compact design and efficient chip control offered by this 63 mm face milling head with internal coolant and seven cutting positions; its 50 mm overall length keeps setups tight while the robust fixing system ensures repeatable results. Order the face milling head directly via Metav Werkzeuge or ask our consultants if needed. Face milling head T487-1TM – 63 mm diameter, internal coolant (Teknik Makina) A face milling head designed for BLMP 0904 indexable inserts, optimised for compact face machining with internal coolant. Face milling head for BLMP 0904 indexable inserts 63 mm diameter for tight setups Internal coolant for improved chip evacuation Seven cutting positions, 50 mm overall length Boost throughput with compact, stable cutting performance The compact 63 mm diameter and 50 mm overall length make this tool ideal where space is limited but high face removal rates are required. With seven cutting positions, the head allows multiple engagement angles per revolution which spreads cutting forces and reduces transient loads; this results in steadier feeds and longer time between replacements. The robust body construction contributes to stable cutting conditions and lower vibration, so cycle times become more predictable and the machining process more efficient. Longer tool life and cleaner cuts through internal coolant Integrated internal coolant supplies cutting fluid directly to the cutting edge, improving lubrication and cooling at the point of contact. This reduces thermal load on the insert, lowers built-up edge and helps evacuate chips from the cutting zone. Compatibility with Taegutec BLMP 0904 indexable inserts means a wide choice of grades for steel or aluminium operations; indexable inserts simplify maintenance because edges can be rotated or replaced without regrinding, sustaining surface quality while saving operator time. Straightforward fitting and reliable clamping for predictable results Assembly and maintenance are simplified by the documented fixing hardware: the head uses a T10 Torx drive and M3.5x8.5 screws for secure retention of the insert seats, allowing quick insert changes and consistent torque application. The head’s mass of 0.615 kg balances rigidity with manageable handling during tool changes. Clear mechanical interfaces reduce setup variability, enabling repeatable positioning and consistent part tolerances across production runs. For reliable high-performance face milling from Teknik Makina, contact Metav Werkzeuge for technical advice and prompt supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T487-1TM Manufacturer: Teknik Makina Product type: Face milling head Description: 63 mm face milling head BLMP 0904 L50 mm with internal coolant Facts Diameter: 63 mm Overall length: 50 mm Weight: 0.615 kg Cutting positions: 7 Cutting angle: 100° Torx key: T10 Torx screw: M3.5x8.5 Internal coolant: yes Compatible inserts: BLMP 0904 Special features Compatible with Taegutec BLMP 0904 indexable inserts Internal coolant channel for targeted cooling Eclass: 21181015 FAQ Which insert type fits this head? This face milling head accepts BLMP 0904 indexable inserts; the design is compatible with Taegutec BLMP 0904 grades for a range of materials. Is there coolant supply through the tool? Yes, the head features internal coolant to deliver fluid directly to the cutting zone, improving chip evacuation and edge life. How many cutting positions are available? The cutter body provides seven cutting positions, allowing multiple effective edges per tool to extend service intervals. What torque tool is required for insert screws? Screw retention uses a T10 Torx drive with M3.5x8.5 screws; consistent torque application ensures repeatable clamping. Is the head suitable for compact setups? With a 63 mm diameter and 50 mm overall length, the head is designed for tight set-ups where space and accessibility are limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for HNGX 0906 Indexable Inserts with Internal Coolant, 45° Cutting Angle - Teknik Makina
Benefit from robust chip control thanks to internal coolant and increased productivity from six cutting edges; the 63 mm diameter and 45° cutting angle deliver efficient, high-quality facing. Order the face milling solution directly via Metav Werkzeuge or consult their specialists for application advice. Face milling head for HNGX 0906 Indexable Inserts — 63 mm, internal coolant Face milling head for HNGX 0906 indexable inserts, designed for precision facing and efficient chip evacuation in production and job-shop environments. 63 mm diameter for wide material engagement Internal coolant for improved chip evacuation Six cutting edges for efficient material removal Compatible with HNGX 0906 inserts by Pramet Boost throughput with optimised cutting geometry and coolant The machining head combines a compact form with performance-focused features to raise cycle efficiency. Equipped with internal coolant, the tool directs cutting fluid precisely to the cutting zone, promoting superior chip control and thermal stability. The 63 mm diameter offers a broad engagement area, while the six cutting edges reduce index changes per component processed, resulting in fewer stoppages and higher net output. This configuration is especially suitable for repetitive facing operations where consistent removal rates and predictable wear behaviour are required. Improved surface quality and reduced cutting forces A 45° cutting angle reduces axial load and smooths the cutting action, which helps to produce a finer surface finish and lowers vibration risk during finishing passes. The head accepts HNGX 0906 style indexable inserts, enabling the use of well-known grades and geometries for varied materials. Selecting an appropriate insert grade balances tool life against surface requirements; using tougher grades extends life under heavier cuts, while fine-grain grades favour superior finishes. The result is a measurable improvement in part quality with predictable tool-change intervals. Maintenance-friendly design for reliable workshop use Maintenance and insert changes are straightforward thanks to the familiar fastenings and service items. The cutter is secured with M4.5x11 Torx screws and adjusted using a Torx T15 key for quick, repeatable clamping. Compatibility with inserts from established suppliers such as Pramet ensures easy sourcing and interchangeability. The head’s compact overall length of 40 mm and moderate mass support safe handling and fast set-up on modular arbors. Documentation of fastening torques and a simple replacement routine are recommended to preserve repeatability and to keep down-time to a minimum. Choose the Teknik Makina face milling head for internal-coolant facing operations and contact Metav Werkzeuge for tailored application advice or ordering assistance — Metav Werkzeuge’s specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: T418-1TM Label: 63 mm face milling head HNGX 0906 L40 mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.518 kg Cutting edges: 6 Cutting angle: 45° Torx key: T15 Torx screw: M4.5x11 Special features Internal coolant For HNGX 0906 indexable inserts Compatible with Pramet inserts Product type: Face milling head SKU/ID: T418-1TM FAQ Is this head compatible with Pramet inserts? The face milling head accepts HNGX 0906 indexable inserts and is listed as compatible with Pramet insert grades and geometries. How does the internal coolant improve machining? Internal coolant in this milling head directs fluid to the cutting edge, improving chip evacuation and thermal control for more consistent tool life and surface finish. What fasteners are used and which key is required? Clamping is achieved with M4.5x11 Torx screws; a Torx T15 key is used for insert changes and maintenance. Can this head be used for finishing and roughing? The tool’s 45° cutting angle and multiple cutting edges make it suitable for both finishing passes and higher-feed facing, depending on insert grade and cutting parameters. What is the product identifier for ordering? Order using SKU T418-1TM for the 63 mm face milling head with internal coolant. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for LNMX 0603 Indexable Inserts With Internal Coolant, 40mm Length - Teknik Makina
Take advantage of high material-removal rates and stable cutting performance thanks to a 63 mm face diameter and internal coolant; order directly via Metav Werkzeuge or contact our consultants for application advice. Face-milling head T838TM — 63 mm, internal coolant, for LNMX 0603 indexable inserts (Teknik Makina) A face-milling head designed for efficient face milling with LNMX 0603 indexable inserts in light to medium-duty production and workshop environments. 63 mm diameter for efficient face milling Internal coolant for better chip control Fits LNMX 0603 Korloy indexable inserts Nine cutting edges for consistent material removal Greater throughput with stable cutting performance The face-milling head delivers productive results through a broad 63 mm cutter diameter and nine cutting edges, which together increase the effective cutting engagement per revolution. Using standard LNMX 0603 indexable inserts means frequent edge changes are fast and economical, so cycle times remain predictable. For applications that require repeatable flatness on workpieces, this configuration provides a practical compromise between material removal rate and surface quality, helping to keep production lines moving with fewer interruptions. Improved tool life and surface finish through coolant feed Built-in internal coolant directs coolant to the cutting zone, reducing thermal load at the cutting edge and promoting consistent chip evacuation. The result is improved edge life and more consistent surface finish on each pass. Maintenance is simplified by standard fastenings: the cutter uses M3x7 screws tightened with a T8 Torx key, allowing quick indexable-insert changes and reduced downtime during shift changes or tool exchanges. Seamless integration and mechanical stability A compact overall length of 40 mm combined with a mounting diameter of 22 mm grants good rigidity and easy fitment in common toolholders. The relatively low mass of 0.766 kg enhances dynamic stability without compromising stiffness, making the head suitable for machines where balance and spindle load are considerations. Compatibility with Korloy for LNMX 0603 inserts helps to streamline inventory management and reduces the need for bespoke insert sourcing. Practical choice for shops that value reliability For job shops and production floors seeking economical, repeatable face-milling solutions, this cutter body offers a clear balance of performance and serviceability. The combination of insert standardisation, internal coolant and straightforward fastening contributes to predictable tool costs and less unscheduled maintenance. The result is a tangible benefit to workshop planning: stable operations and fewer surprises during production runs. For application guidance on Teknik Makina's T838TM face-milling head and to secure reliable supply from Metav Werkzeuge, contact Metav Werkzeuge for personalised advice and ordering from our Emmerich facility. Technical data Article number: T838TM Manufacturer: Teknik Makina Product type: Planmesserkopf Label: 63mm Planmesserkopf LNMX 0603 L40mm mit Innenkühlung Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.766 kg Cutting edges: 9 Mounting diameter: 22 mm Special features Internal coolant Fits LNMX 0603 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M3x7 (Torx key T8) FAQ Which inserts are compatible with this milling head? The face-milling head accepts LNMX 0603 indexable inserts and is specified to be compatible with Korloy inserts for that size. Does the tool provide internal coolant? Yes, the T838TM face-milling head features internal coolant, which feeds coolant directly to the cutting zone to improve chip control and edge life. What is the mounting diameter required for installation? The cutter requires a 22 mm mounting diameter and an overall length of 40 mm, offering a compact footprint for many toolholder systems. How many cutting edges are available per cutter body? This cutter body is specified with nine cutting edges, designed to distribute wear and maintain consistent engagement across the face. Which fastenings are used for the inserts? Inserts are secured with M3x7 screws tightened using a T8 Torx key, allowing quick and secure indexable-insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for LNMX 1004 Indexable Inserts L40mm With Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of internal coolant, a 63 mm diameter and compatibility with LNMX 1004 indexable inserts for reliable, flat-facing operations; order the cutter head via Metav Werkzeuge or consult our specialists for integration advice. Planing cutter head for LNMX 1004 indexable inserts — 63 mm, internal coolant, Teknik Makina The Planing cutter head is a compact face milling head engineered for precision surfacing with LNMX 1004 indexable inserts, suitable for robust workshop and light production use. 63 mm diameter for broad surfacing Internal coolant for extended insert life Compatible with LNMX 1004 Korloy inserts Seven cutting edges for continuous machining 90° cutting angle for flat finishing Consistent flatness and reduced rework The face milling head delivers a stable cutting geometry that translates into uniform surface finish and reduced secondary operations. With a 90° cutting angle, the tool produces true planar faces, which lowers the need for additional machining passes. The head’s mass and geometry ensure stable chip evacuation and consistent contact between insert and workpiece, resulting in fewer rejects and improved throughput for batch surfacing tasks. Enhanced tool life through internal cooling Equipped with internal coolant, the cutter head actively channels coolant to the cutting zone to control temperature and flush chips. This targeted cooling reduces thermal load on inserts, which extends cutting edge life and maintains cutting performance over longer cycles. For production environments where downtimes are costly, the improved insert longevity and heat control translate directly into lower tooling consumption and steadier process windows. Straightforward mounting and secure clamping Designed for reliable workshop handling, the head uses M4x10 torx screws and a T15 Torx interface for secure clamping of inserts and simple changeover. The standardised fastening means quick maintenance intervals and minimal setup time. The compact overall length of 40 mm and manageable mass of 0.47 kg support easy handling on the toolholder and reduce centrifugal imbalance on mid-speed spindle applications. Compatibility and flexible integration Built for LNMX 1004 indexable inserts and compatible with inserts from Korloy, the cutter head supports a wide range of insert grades and geometries, enabling adaptation to different materials and surface requirements. The head’s seven cutting edges allow staged feed strategies that keep feed rates productive while retaining finish quality. Marked as SKU T507TM, this component fits into standard surfacing toolchains and can be specified where flat, repeatable results are required. For tailored advice on integrating the Teknik Makina cutter head with internal coolant (SKU T507TM) into existing setups or to secure stock for upcoming production runs, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — fast supply from our European distribution hub Technical data SKU: T507TM Manufacturer: Teknik Makina Product: Planing cutter head for LNMX 1004 indexable inserts Core specifications Diameter: 63 mm Overall length: 40 mm Weight: 0.47 kg Cutting edges: 7 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Special features Internal coolant Compatible with LNMX 1004 inserts Compatible insert manufacturer: Korloy FAQ What materials can be machined with this cutter head? The cutter head is designed for general face milling tasks and, when fitted with appropriate LNMX 1004 insert grades, can be used across a range of common workshop materials; select the insert grade to match the specific substrate. How does internal coolant benefit machining with this head? Internal coolant channels cool and clear the cutting zone directly, which helps the LNMX 1004 inserts retain edge geometry longer and reduces the risk of heat-related wear during sustained surfacing operations. Which insert types fit this head? The head accepts LNMX 1004 indexable inserts and is compatible with insert grades and geometries supplied by Korloy, enabling adaptation of cutting performance to the application. Are the fastening screws and key included? The head uses M4x10 torx screws and a T15 Torx key interface for insert clamping; these specifications are listed so workshops can prepare the correct spares and maintenance tools. What is the SKU for ordering or referencing in procurement? The product is listed under SKU T507TM and is supplied by Teknik Makina for standard surfacing applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for LOGU 0303 Indexable Inserts With Internal Coolant, L50mm - Teknik Makina
The combination of compact dimensions, internal coolant and broad insert compatibility delivers stable facing performance and reduced cycle-time variability. Benefit from predictable surface finishes and simplified maintenance routines; order the tooling directly via Metav Werkzeuge or consult Metav's technical advisors for application matching. Face milling head for LOGU 0303 indexable inserts — 63 mm, L50 mm, internal coolant (Teknik Makina) Face milling head designed for precise facing operations with LOGU 0303 indexable inserts, optimised for short overhangs and reliable coolant supply 63 mm diameter for compact facing heads Internal coolant for improved chip evacuation Compatible with LOGU 0303 Kyocera inserts 50 mm overall length, robust 1.188 kg build Consistent surface quality through stable geometry The compact 63 mm body and the arrangement of the nine cutting edges ensure a uniform load distribution during facing, which directly improves surface finish and dimensional repeatability. A rigid toolholder geometry reduces deflection and vibration, resulting in fewer rejects and less need for rework. For workshops seeking predictable cycle times, the engineered balance between diameter and mass supports steady feed rates while maintaining component tolerances. Internal coolant that extends tool life and keeps chips clear Integrated internal coolant channels guide cutting fluid directly to the cutting zone, improving cooling efficiency and aiding chip evacuation. This targeted coolant delivery reduces thermal stress on the insert seats and helps prevent build-up on the cutting edges, which in turn prolongs insert life and reduces frequency of changeovers. For machining processes where coolant control is essential, the internal feed supports more consistent cutting conditions and helps protect finished surfaces. Fast insert changes and broad compatibility for reduced downtime Designed for use with LOGU 0303 indexable inserts and compatible with Kyocera clamping systems, the head accepts standard replacement inserts to simplify logistics. Secure clamping is achieved with M3x7 screws tightened using a Torx T8 key, providing repeatable seating and straightforward maintenance procedures. The combination of common fasteners and industry-standard insert geometry reduces spare-part complexity and shortens maintenance cycles. Compact dimensions and robust construction for reliable handling With a 50 mm overall length and a weight of 1.188 kg, the head is built to withstand routine workshop handling while limiting overhang. The shorter projection minimises bending moments at the spindle nose, which supports consistent machining under moderate loads and helps maintain tool life. Where space or access is restricted, the compact form factor enables efficient setup without compromising stability or repeatability. For tailored specification support or to order the Teknik Makina face milling head, contact Metav Werkzeuge—Metav's technical team can advise on insert selection, clamping parameters and process integration; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: T734-1TM ECLASS: 21181015 Label: 63mm face milling head LOGU 0303 L50mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 50 mm Weight: 1.188 kg Cutting edges: 9 Screw: M3x7 (Torx T8) Special features Internal coolant For LOGU 0303 indexable inserts Compatible with Kyocera inserts FAQ Which inserts fit this head? The head accepts LOGU 0303 indexable inserts and is specified as compatible with Kyocera insert systems for straightforward replacement. Is internal coolant integrated in the tool? Yes, the face milling head includes internal coolant channels to direct fluid to the cutting zone and aid chip evacuation. What fastening hardware is required for insert changes? Inserts are secured with M3x7 screws tightened with a Torx T8 key for repeatable clamping and simple maintenance. What are the main dimensions and the SKU? The tool has a diameter of 63 mm, an overall length of 50 mm, a weight of 1.188 kg and is listed as SKU T734-1TM. How many cutting edges does the head provide? The tool is equipped to use configurations that provide nine cutting edges, supporting continuous facing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head For OFCR 0704 Indexable Inserts 43° Cutting Angle, M8x18 Lock Screw - Teknik Makina
Take advantage of a compact, precision-engineered face-milling head that combines a Ø63 mm cutting profile with 4 cutting edges and a 43° cutting angle for consistent surface quality and efficient chip evacuation — order directly via Metav Werkzeuge or consult our specialists for application advice. Planmesserkopf T262TM — Face-milling head for OFCR 0704 indexable inserts, Ø63 mm, 43° cutting angle (Teknik Makina) The Planmesserkopf T262TM is a robust face-milling head engineered for short setup times and reliable performance with OFCR 0704 indexable inserts, suited to light and medium-duty milling tasks in job shops and production cells For OFCR 0704 indexable inserts Ø63 mm diameter, compact profile 4 cutting edges for high productivity 43° cutting angle for fine surface finish Compact design for fast changeovers and precise results The compact Ø63 mm body and 22 mm mounting bore are designed to reduce overhang and improve stiffness, resulting in lower vibration and improved dimensional consistency. With a total length of 45 mm and a mass of 0.722 kg, the head keeps rotational inertia low, which benefits quicker spindle acceleration and shorter cycle times. These measurable attributes translate into concrete cost-efficiency: less machine idle time and a predictable process window for small-batch and repetitive tasks. Secure clamping and straightforward maintenance A clamping arrangement compatible with a BK300 clamping shank and a M8x18 locking screw provides secure fixation under standard cutting loads. The delivered maintenance key (4 Allen) simplifies insert changes and routine checks, so toolholders can be serviced quickly between shifts. This stable connection reduces the need for frequent re-setting, improving overall equipment effectiveness and lowering the probability of rejects due to loosening or misalignment. Surface quality and cutting performance explained The 43° cutting angle together with 4 cutting edges is optimised to produce a fine surface finish while maintaining efficient chip removal. A shallower approach angle spreads cutting forces and helps to avoid edge chipping on indexable inserts, which increases usable edge life and reduces tooling cost per part. For operators unfamiliar with the geometry, this means the head delivers balance between material removal rate and finish without aggressive toolpaths — ideal for finishing passes or light semi-finishing. Application areas and operational confidence Engineered for compatibility with OFCR 0704 indexable inserts, the tool head performs well on typical ferrous and non-ferrous workpieces in workshop and light industrial environments. Its compact footprint supports use on smaller mills and lathes where space and rigidity matter. Combined with Metav’s supply reliability, the component offers a practical route to modernising tooling stocks with minimal disruption, giving procurement teams confidence in both delivery and repeatable performance. For tailored application advice or to secure supply from Metav Werkzeuge, contact our specialists in Emmerich for expert guidance and dependable delivery. Technical Data Article number: T262TM Designation: Face-milling head for OFCR 0704 indexable inserts SKU: T262TM Facts Diameter: 63 mm Total length: 45 mm Weight: 0.722 kg Cutting edges: 4 Cutting angle: 43° Mounting bore: 22 mm Special features Suitable for OFCR 0704 indexable inserts Clamping shank: BK300 Locking screw: M8x18 Maintenance key: 4 Allen FAQ Which insert type fits this head? The head is made for OFCR 0704 indexable inserts and is supplied as a face-milling solution compatible with that insert geometry. Can the head be used on compact milling machines? Yes. The compact Ø63 mm design and 22 mm bore allow use on smaller spindles where reduced overhang and stiffness are advantageous. How is the insert clamped and changed? Insert changes are performed using the included 4 Allen key to secure the M8x18 locking screw; the BK300 clamping shank ensures stable fixation during operation. Is the component suitable for finishing work? The 43° cutting angle and four cutting edges are optimised to provide a fine surface finish, making the head suitable for finishing and light semi-finishing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for ONMU 0505 Indexable Inserts W45mm With Internal Cooling, 45° Cutting Angle - Teknik Makina
Combining a 63 mm cutting diameter with internal coolant and compatibility for ONMU 0505 indexable inserts, this face mill head delivers steady material removal and consistent surface quality; order directly via Metav Werkzeuge or consult the technical team for application-specific guidance. Face mill head for ONMU 0505 indexable inserts — 63 mm, internal coolant (Teknik Makina) The face mill head provides efficient facing with ONMU 0505 indexable inserts, designed for secure insert clamping and improved chip control in standard production environments. 63 mm diameter for broad facing Internal coolant for improved chip evacuation 6 cutting edges for high productivity Compatible with ISCAR ONMU 0505 inserts Increased throughput through optimised geometry With a 63 mm diameter and 6 cutting edges, this milling cutter head is engineered to raise metal removal rates while maintaining stability. The 45° cutting angle reduces cutting forces and spreads wear across the inserts, which helps preserve tool life and reduces the frequency of index changes. For shops focused on repeatable productivity, the arrangement of cutting edges and the cutter’s rigid mounting contribute to a predictable cycle time and consistent surface finish, translating into measurable process efficiency. Coolant-fed design for thermal control and chip evacuation The integrated internal coolant channel directs fluid close to the cutting zone, reducing heat generation at the edge and improving chip breakage. This results in lower thermal load on the inserts and a reduced risk of built-up edge, which in turn supports longer insert life and better component quality. The use of a coolant-fed head also simplifies coolant management compared with external-application setups, improving process reliability in wet machining operations and enhancing repeatability across batches. Simple setup and proven compatibility for straightforward integration Configured for ONMU 0505 indexable inserts from ISCAR and secured with M5x12 Torx screws (Torx key T20), the cutter head supports rapid insert changes and reliable clamping. The compact overall length of 45 mm and a mass of 0.652 kg make handling and tool change ergonomically manageable on most toolholders. Supplied as a ready-to-fit milling head, this solution eases retrofitting into established tool chains and helps maintain uptime by keeping changeover time low. The unit is supplied under Teknik Makina designation T794-1TM, enabling clear identification for spares and inventory control. For application advice or to request the Teknik Makina face mill head T794-1TM with internal coolant, contact Metav Werkzeuge for tailored guidance and supply from Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: T794-1TM Manufacturer: Teknik Makina Product type: Face mill head Suitable for inserts: ONMU 0505 Compatible insert brand: ISCAR Torx screw: M5x12 Torx key: T20 Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.652 kg Cutting edges: 6 Cutting angle: 45° Internal coolant: yes Special features Internal coolant channel Indexable inserts: ONMU 0505 Secured with M5x12 Torx screws Compact design for easy integration FAQ Which inserts are compatible with this milling head? The face mill head accepts ONMU 0505 indexable inserts and is listed as compatible with ISCAR inserts for straightforward procurement and replacement. Does the head support coolant-through operation? Yes, the head features internal coolant channels designed to deliver coolant directly to the cutting zone to aid chip control and thermal management. What screw and key are required for insert mounting? Insert clamping uses M5x12 Torx screws; a T20 Torx key is specified for secure and repeatable fastening of the inserts. Is this head suitable for retrofit into existing toolholders? The compact overall length (45 mm) and standard mounting form factor facilitate integration into many common toolholder systems; reference the designation T794-1TM for compatibility checks. How many cutting edges are available per cutter head? The head is equipped with six cutting edges, enabling efficient facing cycles and reduced changeover frequency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head For ONMX 0806 Indexable Inserts L40mm With Internal Cooling - Teknik Makina
Take advantage of a precise 63 mm cutting diameter and integrated internal coolant to improve cycle reliability and surface quality; the T780-1TM combines stable cutting geometry with easy insert handling for uninterrupted production—order directly via Metav Werkzeuge or consult our technical team for application advice. Face milling head T780-1TM – 63 mm diameter, internal coolant (Teknik Makina) Face milling head T780-1TM for ONMX 0806 indexable inserts, engineered for high-rate face milling with controlled chip evacuation and secure insert clamping 63 mm diameter for broad face milling Internal coolant for direct edge cooling Five cutting edges for efficient indexing 45° cutting angle for smooth cutting Increase throughput with a stable cutting geometry The 63 mm diameter and a 45° cutting geometry deliver a balance between material removal rate and surface finish. By combining a larger working diameter with an inclined cutting angle, the head reduces instantaneous cutting forces and smooths chip load variations, which benefits cycle time and tool life. The 63 mm dimension and the 45° cutting angle are specified for predictable machining behaviour, making the component suitable for repetitive face-milling operations where consistent flatness and tolerances are required. Direct cooling at the cutting edge for longer insert life Integrated internal coolant channels feed cutting fluid close to the insert seat, improving heat dissipation and chip control. Direct coolant reduces thermal stress on the insert and the holder, which helps maintain cutting-edge geometry and extends the service intervals. For shops prioritising uptime, the internal coolant feature supports stable cutting temperatures and contributes to repeatable surface quality without additional external routing. Secure clamping and uncomplicated assembly Designed for ONMX 0806 indexable inserts, the head uses a Torx screw M5x12 with a T20 drive for positive clamping and straightforward index changes. The clear-fit design simplifies insert replacement and reduces downtime during tool changes. The robust fixing method ensures minimal play under load, preserving repeatability and concentricity when replacing inserts or reconditioning the cutting edge. Compact form with practical handling characteristics With an overall length of 40 mm and a mass of 1.063 kg, the milling head is compact yet substantial enough to support stable cutting. The construction facilitates balancing and vibration damping in moderate-duty face milling, while the weight contributes to cutting stability without compromising toolholder compatibility. The configuration with five cutting edges enables multiple indexable positions per insert, reducing consumable turnover and supporting economical production runs. Contact Metav Werkzeuge for tailored technical advice on the T780-1TM face milling head from Teknik Makina and to discuss suitability for specific machining tasks Technical Data Article number: T780-1TM SKU: T780-1TM Product type: Face milling head Facts Diameter: 63 mm Overall length: 40 mm Weight: 1.063 kg Cutting angle: 45° Number of cutting edges: 5 Special features Compatible inserts: ONMX 0806 Internal coolant: yes Torx screw: M5x12 Torx key: T20 Manufacturer: Teknik Makina FAQ Which inserts fit this milling head? The T780-1TM face milling head is designed for ONMX 0806 indexable inserts and provides the correct seat and clamping geometry for this insert type. Does the head provide internal coolant flow? Yes, the T780-1TM has internal coolant channels that deliver fluid directly near the insert seat to improve cooling and chip control. What fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M5x12 secured with a T20 key; this arrangement ensures positive clamping and easy insert indexing. Is the milling head suitable for compact toolholders? With an overall length of 40 mm and a balanced mass of 1.063 kg, this milling head suits applications where a compact, stable holder is required for face milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for SDHT 1204 Indexable Inserts L45mm With Through-Coolant, 45° Cutting Angle - Teknik Makina
Take advantage of the compact 63 mm diameter, five cutting edges and built‑in coolant for reliable, high‑quality facing operations; order directly via Metav Werkzeuge or consult our technical team for application guidance. Face milling head 63 mm for SDHT 1204 indexable inserts — Teknik Makina The Face milling head is a robust cutter head engineered for precise facing operations with SDHT 1204 indexable inserts, offering a compact design for production and job‑shop environments. 63 mm diameter cutter head Compatible with SDHT 1204 inserts Internal coolant for chip control Five cutting edges for steady removal 45° cutting angle for smooth finishes Consistent surface quality through optimised geometry The milling head combines a compact footprint with an angled cutting geometry that promotes stable engagement and reduced vibration. With a 45° cutting angle and five cutting edges, the tool reduces cutting forces per tooth, which results in a more uniform surface finish and predictable tool behaviour. The indicated max cutting diameter 77 mm provides a clear expectation of working range, enabling planners to balance material removal rate and machine load for steady production cycles. Built‑in coolant for higher productivity and longer component life An integrated internal coolant channel directs fluid precisely to the cutting zone, improving chip evacuation and heat control during facing operations. This reduces thermal load on both insert and workpiece, which helps maintain dimensional accuracy over long runs. By improving cooling and chip flow, the cutter head supports higher sustained cutting parameters and contributes to extended tool life, lowering the frequency of index changes and machine stoppages. Fast, secure assembly and clear compatibility Designed specifically for SDHT 1204 indexable inserts, the head accepts standard torx fastening for quick insert changes. Fastening uses a M4.5x11 Torx screw operated with a T15 key, ensuring repeatable clamp force and straightforward maintenance. The compact shank with a 22 mm mounting diameter and an overall length of 45 mm keeps the mass low (approx. 0.63 kg), supporting stable spindle dynamics and simple handling during setup. Practical advantages for busy production environments This cutter head is tailored for shops that prioritise throughput and repeatability. The combination of compact dimensions, internal coolant and a multi‑edge configuration delivers reliable facing performance with reduced intervention intervals. Supplied by a dependable partner, the head fits into modular tool setups and spare‑parts strategies, helping operations reduce downtime and simplify inventory management while maintaining consistent machining results. For technical advice or to arrange supply of the Teknik Makina face milling head (SKU T300-1TM), contact Metav Werkzeuge for personalised support and ordering assistance. Technical Data SKU: T300-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Product type: Face milling head Compatible inserts: SDHT 1204 Indexable Inserts Facts Diameter: 63 mm Max cutting diameter: 77 mm Overall length: 45 mm Shank diameter: 22 mm Cutting angle: 45° Number of cutting edges: 5 Weight: 0.63 kg Special features Internal coolant Torx key: T15 Torx screw: M4.5x11 Designed for SDHT 1204 indexable inserts FAQ Which inserts are compatible with this milling head? The face milling head is designed for SDHT 1204 indexable inserts and is supplied as SKU T300-1TM by Teknik Makina for straightforward integration into standard tool systems. Does the cutter head provide coolant to the cutting edge? Yes, the head features internal coolant channels that deliver fluid directly to the cutting zone, improving chip evacuation and thermal control for the Teknik Makina face milling head (T300-1TM). What fastening hardware is required for insert changes? Insert clamping uses a Torx screw (M4.5x11) tightened with a T15 key, providing secure and repeatable fixation for SDHT 1204 inserts on this Teknik Makina head. Is the head suitable for automated tool changers and compact setups? With a 22 mm shank diameter and 45 mm overall length, the head is compact and well suited to modular tooling systems; the SKU T300-1TM from Teknik Makina balances size and rigidity for many production applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for SDMT 09T3 Indexable Inserts L40mm with Internal Coolant, 6 Cutting Edges - Teknik Makina
Compact, coolant-enabled machining with robust insert compatibility makes this tool ideal for short-faced milling operations; the 63 mm diameter and internal coolant deliver enhanced chip control and consistent surface finish. Order the face milling cutter head directly via Metav Werkzeuge or ask our consultants if needed. Face milling cutter head T364-1TM by Teknik Makina — 63 mm diameter with internal coolant A face milling cutter head engineered for SDMT 09T3 indexable inserts, designed to bring stable, short-reach face milling performance to CNC and workshop environments. 63 mm diameter for compact face milling Internal coolant for improved chip evacuation Compatible with SDMT 09T3 ZCC inserts Six cutting edges for stable material removal Higher throughput from a compact tool body The compact 63 mm diameter of this cutter head concentrates the cutting action where it is needed, enabling efficient cycle times on short-face operations without excessive overhang. With six cutting edges, the design balances material removal rate and cutting stability, reducing vibration in interrupted cuts. The result is a measurable productivity gain on small- to medium-sized components and a reduction in non-productive time due to fewer insert changes. Consistent surface quality enabled by coolant-through design A built-in internal coolant channel directs cutting fluid to the insert tips, improving chip evacuation and cooling the cutting zone. This targeted delivery reduces edge chipping and thermal wear, which helps maintain a consistent surface finish across a production run. For users less familiar with coolant-through tooling, this means fewer deferrals for rework and more predictable part quality in aluminium and general steel machining tasks. Wide compatibility simplifies tooling logistics Specifically designed for SDMT 09T3 indexable inserts and compatible with ZCC inserts, the head reduces the need for unique insert families. The cutter head T364-1TM uses standard M3.5x8.5 screws secured with a T15 Torx key for reliable clamping; spare parts are widely available, which eases procurement. This compatibility reduces inventory complexity and supports faster tool changes on the shop floor, particularly useful for job shops handling varied batch sizes. Practical handling and straightforward maintenance With an overall length of 40 mm and a weight of 0.592 kg, the unit is easy to manoeuvre during tool set-up and changeover. Fast, secure insert replacement is supported by the Torx fastening system, keeping downtime low. Routine inspection focuses on insert condition and coolant passages; keeping the coolant channel clear prolongs insert life and preserves cutting performance, which delivers predictable operating costs over time. For tailored advice on integrating the Teknik Makina face milling cutter head T364-1TM into existing toolsets and to request delivery from Metav Werkzeuge, contact our technical consultants today Technical data SKU: T364-1TM Product type: Face milling cutter head Label: 63mm Planmesserkopf SDMT 09T3 L40mm mit Innenkühlung Manufacturer: Teknik Makina Core data Diameter: 63 mm Overall length: 40 mm Weight: 0.592 kg Cutting edges: 6 Special features Internal coolant: yes Compatible inserts: SDMT 09T3 Compatible insert manufacturer: ZCC Torque key: T15 Torx Screw: M3.5x8.5 FAQ What materials is this cutter head suitable for? The face milling cutter head T364-1TM is suitable for standard applications where SDMT 09T3 inserts are used; insert selection determines suitability for specific steels, aluminium or other alloys. Are the coolant passages compatible with standard machine coolant systems? Yes, the internal coolant channel of the T364-1TM is designed for integration with standard machine coolant feeds to deliver fluid directly to the insert interface. Which inserts must be used with this cutter head? The cutter head accepts SDMT 09T3 indexable inserts; compatibility with ZCC-branded inserts is specified for reliable fit and performance. How are the inserts fastened and replaced? Inserts are secured with M3.5x8.5 screws tightened using a T15 Torx key, allowing secure clamping and straightforward replacement during maintenance. Is the T364-1TM suitable for high-speed machining? The T364-1TM provides effective coolant delivery and stable clamping; appropriate insert grade and machine parameters determine suitability for high-speed applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for SEET 12T3 Indexable Inserts L40mm, 45° Cutting Angle, Internal Coolant - Teknik Makina
Take advantage of the combination of 63 mm diameter, internal coolant and compatibility with SEET 12T3 indexable inserts to secure steady milling performance and repeatable surface quality; order the face milling head directly via Metav Werkzeuge or ask the consultants if needed. Face milling head for SEET 12T3 indexable inserts — 63 mm, internal coolant | Teknik Makina The face milling head is designed for use with SEET 12T3 indexable inserts and is intended for compact, high-stability milling applications in production and job-shop environments. 63 mm diameter for compact toolpacks Internal coolant for improved chip evacuation Compatible with SEET 12T3 indexable inserts 45° cutting angle for reliable finishing High-throughput milling with consistent results The cutter is engineered to deliver steady material removal while maintaining surface finish. With a 63 mm diameter and a 45° cutting angle, the head balances cutting forces and generates predictable chip formation, which reduces vibration and improves cycle-time stability. The 5 cutting edges distribution permits uniform wear and simple indexing, supporting efficient batch production and reduced operator intervention. Improved tool life through internal coolant and secure fixing Built-in internal coolant supplies cutting fluid directly to the cutting zone, supporting lubricity and cooling where it matters most; this reduces heat-induced wear and helps prevent edge chipping during interrupted cuts. Fastening is performed with M3.5x11 Torx screws (Torx key T15), ensuring reproducible clamp torque and secure insert retention for longer service intervals and safer running at elevated cutting speeds. Precision mounting and compatibility with common toolholders The head accepts a 22 mm shank (shank diameter 22 mm), enabling integration into compact toolpacks and modern modular holders. Compatibility with SEET 12T3 inserts simplifies stockkeeping and tool change routines, while the overall compact length (L40 mm) supports close-tolerance operations where overhang must be minimised. The design supports routine set-up workflows on CNC milling machines and machining centres. Practical handling and maintenance for workshop efficiency At a weight of 0.505 kg, the component is easy to handle during tool assembly and reconditioning. The tool geometry and accessible fasteners facilitate quick insert changes and straightforward cleaning of coolant passages. Clear torque practice for the specified Torx screws and routine inspection of the coolant port ensure repeatable clamping and reduced unscheduled downtime. Application focus and production benefits This head is suited to facing, light shoulder milling and finishing passes where compact tooling and good surface integrity are priorities. Use with appropriate insert grades optimised for the workpiece material to achieve best results; the head’s features support higher feed rates and longer unmanned cycles, making it a practical choice for industrial and precision jobbing environments. For reliable milling performance and assured supply, request the Teknik Makina face milling head T562-1TM through Metav Werkzeuge — our consultants are available to advise on insert grades and holder compatibility and to ensure rapid delivery from Emmerich. Technical data SKU: T562-1TM Product type: Face milling head Brand: Teknik Makina ECLASS: 21181015 Facts Diameter: 63 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.505 kg Cutting edges: 5 Cutting angle: 45° Special features Compatible inserts: SEET 12T3 Internal coolant: yes Torx key: T15 Torx screws: M3.5x11 Aufnahme (mount) dimension: 22 mm FAQ Which inserts fit this milling head? The face milling head accepts SEET 12T3 indexable inserts; select the appropriate insert grade for the workpiece material and the desired surface finish. Is internal coolant supported through the body? Yes, internal coolant is integrated and supplies fluid directly to the cutting zone to improve tool life and chip evacuation. What fasteners and key are required for insert clamping? Insert clamping uses M3.5x11 Torx screws tightened with a T15 Torx key for secure and reproducible fixing. What shank size is required for mounting? The head is designed for a 22 mm shank interface, allowing installation in compatible modular holders and compact toolpacks. Is the tool suitable for finishing passes? With its 45° cutting angle and five-edge arrangement, the head is well suited to finishing and light shoulder milling where stability and surface quality are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for SEET 12T3 Indexable Inserts L50mm, 5 Teeth, Internal Coolant - Teknik Makina
Benefit from a robust 63 mm facing head with internal coolant and a 45° cutting angle for precise, efficient facing operations; order directly via Metav Werkzeuge or consult our specialists for integration into existing setups. Planmesserkopf T435-1TM — 63 mm facing head with internal coolant for SEET 12T3 by Teknik Makina A Planmesserkopf designed for high-efficiency facing in metalworking, compatible with SEET 12T3 indexable inserts and engineered for stable chip control during finishing and semi-finishing operations 63 mm diameter facing head Compatible with SEET 12T3 indexable inserts Internal coolant for improved chip evacuation 45° cutting angle for smooth facing Increase throughput with a compact, coolant-fed facing head The compact 63 mm diameter and 50 mm overall length give a favourable balance between accessibility and rigidity, making this tool ideal for confined setups where stability matters. Fitted for SEET 12T3 indexable inserts, the head supports rapid insert indexing to maintain cycle times and reduce tool-change downtime. The integrated internal coolant directs fluid right to the cutting edge, lowering temperatures and helping to evacuate chips more effectively — a direct contributor to longer insert life and consistent surface quality. These features combine to raise productivity on facing operations while keeping process variability low. Quick, secure insert changes and reliable clamping Tool changing and maintenance are simplified by the standardised fastening system: the head uses M3,5x8,5 Torx screws driven with a T15 key for repeatable clamping torque and minimal setup time. The configuration with five cutting edges permits stable engagement across the workpiece, and the 45° cutting geometry moderates cutting forces to reduce vibration. For shops consolidating tools, this translates into predictable cycle performance and fewer in-process interruptions, enabling better planning for batch production and mixed-material runs. Consistent surface finish and durable performance under load Designed for facing, the 45° rake provides a controlled shearing action that produces a fine surface finish while distributing cutting forces across the insert. The facing head’s mass (0.815 kg) contributes to damping at the tool tip, which supports dimensional stability when machining broader faces. With coolant delivered internally, thermal growth is minimised and cutting-edge temperatures are better managed, improving repeatability and safeguarding component tolerances. The head’s configuration therefore supports both finish-class and productivity-driven workflows. For reliable facing performance from the Teknik Makina range, contact Metav Werkzeuge for tailored advice on integrating the T435-1TM into existing machines and workholding — Metav Werkzeuge is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: T435-1TM Product type: Planmesserkopf Manufacturer: Teknik Makina Facts Diameter: 63 mm Overall length: 50 mm Weight: 0.815 kg Number of cutting edges: 5 Cutting angle: 45° Torx key: T15 Torx screw: M3,5x8,5 Internal coolant: yes Special features For SEET 12T3 indexable inserts Facing head configuration Label: 63mm Planmesserkopf SEET 12T3 L50mm FAQ Which inserts fit this facing head? The facing head is designed for SEET 12T3 indexable inserts; using the correct SEET 12T3 grade ensures compatibility with the insert pocket geometry and clamping. Does the tool support internal coolant supply? Yes, the head features internal coolant, which supplies cutting fluid directly to the insert interface to improve chip control and tool life. What driving tools and screws are required for insert changes? Insert clamping uses M3,5x8,5 Torx screws tightened with a T15 key for secure and repeatable fixation. Is this head suitable for finishing and semi-finishing? The 45° cutting angle and stable design make the head well suited to both finishing and semi-finishing facing operations, delivering consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for SEET R245 12T3 Indexable Inserts 45° Cutting Angle, 5 Teeth, 22mm Shank - Teknik Makina
Benefit from a stable 22 mm shank and 45° cutting geometry that deliver controlled chip flow and repeatable surface finish; the compact 63 mm head diameter minimises vibration for steady cutting. Order the planing cutter head directly via Metav Werkzeuge or consult technical advisers for system integration. Planing cutter head T562TM — indexable cutter head for SEET 12T3 inserts, 45° cutting angle (Teknik Makina) A robust planing cutter head T562TM designed for face machining with SEET R245 12T3 indexable inserts, offering secure mounting and efficient chip evacuation in repetitive production tasks 45° cutting angle for controlled chip flow 22 mm shank for secure toolholder fit Compatible with SEET R245 12T3 inserts Suitable for Sandvik, XTC and ZCC inserts Consistent surface quality through controlled geometry The combination of a 45° cutting angle and a compact head diameter ensures a lower radial cutting force and improved chip control, which translates into a more consistent surface finish and reduced vibration during face machining. With a 22 mm shank the tool achieves secure retention in standard toolholders, improving repeatability across multiple setups. For production planners this means less rework and a predictable cycle time per component, while workshop technicians benefit from stable cutting conditions that make tool offsets easier to tune. Quick change assembly and broad insert compatibility Designed for use with SEET R245 12T3 indexable inserts, this cutter head accepts inserts from major manufacturers such as Sandvik, XTC and ZCC, simplifying procurement and stock management. Fixing is achieved using standard fasteners (M3.5x11 Torx and M5x7 Allen screws) and a T15 Torx key, so replacement of inserts is straightforward and can be carried out without specialised tooling. The familiar hardware and the U‑plate TA052 reduce downtime during service intervals and ensure repeatable clamping force for each insert change. Predictable tool life and production reliability With five effective cutting edges and a compact overall length of 40 mm, the head balances material removal and rigidity to extend consistent tool life under stable cutting conditions. The modest mass (0.505 kg) helps avoid unnecessary spindle load while remaining rigid enough for standard face-turning or planing operations. By keeping mechanical variables such as shank diameter and head geometry constant, process engineers can forecast tooling costs and machining windows more accurately, improving overall throughput and cost-efficiency. Practical integration into workshop workflows The modular design supports straightforward replacement of inserts and routine maintenance without altering the machine setup. Where documentation or fixture checks are required, record the component as a 22 mm shank tool with a 63 mm head diameter and a 45° cutting geometry to ensure correct tool library entries. If toolholders or adapters are being standardised across a fleet of machines, the consistent dimensions and industry-standard fasteners make this head a pragmatic choice for consolidating tool inventories. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina planing cutter head T562TM into existing toolholder systems and for procurement support Technical Data Article number: T562TM Manufacturer: Teknik Makina Product name: Planing cutter head Description: for SEET 12T3 Indexable Inserts Facts Shank diameter: 22 mm Head diameter: 63 mm Cutting angle: 45° Cutting edges: 5 Total length: 40 mm Weight: 0.505 kg Special features Compatible inserts: SEET R245 12T3 Compatible manufacturers: Sandvik Compatible manufacturers: XTC Compatible manufacturers: ZCC Torx screw: M3.5x11 Allen screw: M5x7 Torx key: T15 U‑plate: TA052 FAQ Which indexable inserts fit this cutter head? The planing cutter head accepts SEET R245 12T3 indexable inserts, the specified geometry for correct seating and chip formation. Are inserts from major brands compatible? Yes. Inserts from Sandvik, XTC and ZCC are compatible with the Teknik Makina T562TM head, facilitating flexible sourcing. What are the tool's key mounting dimensions? Mounting is defined by a 22 mm shank and a 63 mm head diameter; the overall length is 40 mm for tool library setup. Which fasteners are used for insert clamping? Insert clamping uses an M3.5x11 Torx screw and an M5x7 Allen screw, with a T15 Torx key specified for maintenance operations. How does the 45° cutting angle benefit machining? The 45° cutting angle reduces radial cutting forces and improves chip evacuation, resulting in steadier cuts and better surface finish for face machining. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for SNEU 1206 Indexable Inserts 6 Cutting Edges 45° With Internal Coolant - Teknik Makina
Take advantage of the combination of precise chip control, a compact 63 mm cutter body and robust six‑edge tooling to increase throughput and reduce set‑up time; order directly via Metav Werkzeuge or request tailored application advice from our specialists. Planmesserkopf T165-1TM – 63 mm face milling head with internal coolant (Teknik Makina) The Planmesserkopf T165-1TM is a face milling head for SNEU 1206 indexable inserts, engineered for reliable finishing and medium‑to‑heavy face milling in conventional and CNC machining environments. Face milling head for SNEU 1206 inserts 63 mm cutting body diameter Internal coolant for improved chip evacuation Six cutting edges, 45° cutting angle Increase productivity through controlled chip evacuation and higher feeds Equipped with internal coolant and a compact 63 mm body, this head supports stable thermal conditions at the cutting zone, which enables higher sustained feed rates without compromising tool life. The built‑in coolant channel improves chip evacuation, reducing rework and machine idle time. For production shops requiring predictable cycle times, the combination of coolant‑assisted cutting and a multi‑edge design delivers measurable increases in throughput while maintaining consistent tool performance. Achieve consistent surface quality and dimensional accuracy The geometry with a 45° cutting angle and maximum cutting diameter of 76 mm promotes smooth engagement and a uniform surface finish on workpieces. Accepting SNEU 1206 indexable inserts and matching Walter insert standards ensures repeatable cutting edges and quick index changes, which stabilises tolerances across batches. The arrangement of six edges distributes cutting forces evenly, improving stability and reducing vibration for better dimensional control on flat surfaces. Robust fastening and quick insert changes for minimal downtime Fast, secure assembly is supported by Torx T20 drive screws and M5x12 fasteners, enabling quick insert replacement and reliable clamping torque that minimises the risk of loosening under load. The head’s modest mass (0.582 kg) and compact 40 mm overall length simplify handling during set‑up and tool change procedures, shortening fixture times and lowering the risk of handling damage in busy workshops. Designed for workshop integration and flexible routing This face milling head integrates easily into existing toolholders and fixtures thanks to its standard interface dimensions and compatibility with commonly used insert systems. Supplied by Teknik Makina, the unit is suitable for both retrofit installations and new machine tool lines where compact, coolant‑fed tooling is required. The product’s straightforward interface supports harmonised tool inventories and reduces the need for special holders. Practical benefits for procurement and maintenance planning Choosing this solution supports predictable maintenance cycles: standard Torx fittings and widely available SNEU 1206 inserts simplify spare‑part logistics, while the internal coolant channel reduces heat‑related wear. The head’s design promotes cost‑effective production by lowering scrap rates and extending the usable life of indexable inserts, making it a pragmatic option for production managers focused on uptime and consistent output. For application advice or to place an order for the Teknik Makina face milling head (SKU T165-1TM), contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support and delivery details Technical data Article number: T165-1TM Manufacturer: Teknik Makina Label: 63mm Planmesserkopf SNEU 1206 L40mm mit Innenkühlung ECLASS: 21181015 Dimensions & performance Diameter: 63 mm Max cutting diameter: 76 mm Total length: 40 mm Weight: 0.582 kg Cutting edges: 6 Cutting angle: 45° Features & compatibility Internal coolant: yes Compatible inserts: SNEU 1206 Suitable insert brand: Walter Torx key: T20 Torx screw: M5x12 SKU / UID: T165-1TM FAQ Which inserts are compatible with this face milling head? The head accepts SNEU 1206 indexable inserts; it is compatible with inserts from Walter that conform to that specification, ensuring correct fit and performance. Is this head suitable for high‑feed finishing passes? With internal coolant, a six‑edge layout and a 45° cutting geometry, the head supports higher feed rates and improved finishing stability under controlled conditions. How are the inserts secured and removed? Inserts are fastened using Torx T20 drive screws (M5x12), allowing reliable clamping torque and straightforward replacement with standard workshop tools. Can this tool be retrofitted to existing tool holders? The compact design and standard interface dimensions facilitate retrofit into many common toolholders; reference SKU T165-1TM when verifying holder compatibility. What advantages does the coolant channel provide during operation? The integrated coolant channel directs coolant to the cutting zone, enhancing chip evacuation, reducing thermal load and promoting longer insert life for consistent batch quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com