Reliable magnetic stands for precise positioning
Magnetic stands provide a stable base for holding measuring instruments and workpieces, delivering repeatable positioning and enabling accurate inspection and setup operations. These systems are used to secure dial indicators, feeler-lever gauges and other measuring devices to machine beds or fixtures, offering flexibility through adjustable arms and swivel joints for exact alignment. Available variants include switchable magnetic base, flexible arm stand and mini magnetic stand, each designed to support different holding forces and practical applications in metalworking. Robust magnetic blocks and prism feet allow mounting on shafts and large parts, ensuring reliable clamping during measurement and setup.
400x25 Magnetic Dial Stand Fine Adjustment 250x18 Base 50x120x55 - Microtech Metrology
Take advantage of a compact magnetic measuring stand with fine adjustment, a sturdy 400 x 25 mm column and a 50 x 120 x 55 mm base for repeatable indicator readings; order directly via Metav Werkzeuge or consult our specialists for application advice. Measuring stand (magnetic base) — fine adjustment, 130 holding force by Microtech Metrology Measuring stand for secure mounting of dial and test indicators on inspection tables, machine beds and bench fixtures, combining steady clamping with micro‑positioning. Fine adjustment for precise positioning Magnetic base with strong holding force 400 x 25 mm column for stable reach Compact base 50 x 120 x 55 mm Stable clamping for accurate indicator readings A robust magnetic base with fine adjustment turns routine checks into reproducible measurements. The integrated micro‑adjustment mechanism permits controlled, small movements that reduce overshoot when setting an indicator tip; this improves repeatability and shortens setup time. Thanks to the magnetic plate and its rated holding value, the unit provides steady anchorage on ferrous surfaces, making it suitable for inspection benches and machine tables where reliable contact is essential. The construction focuses on rigidity and predictable behaviour rather than unnecessary complexity, which supports consistent measurement chains in production and quality control. Built for workshop workflows and easy handling The vertical 400 x 25 mm column and a 250 x 18 mm cross arm deliver a practical working envelope while keeping the centre of gravity low. The compact 50 x 120 x 55 mm base minimises footprint without compromising stability, so the stand fits crowded benches and tight setups. The articulated cross arm allows quick repositioning of the indicator head and retains alignment after clamping; this reduces repositioning time during successive inspections. Materials and mechanical clearances are specified to resist everyday wear in machine shops, supporting a high duty cycle and low maintenance requirements. Practical benefits: faster inspections, fewer errors Integrating this magnetic fixture into daily checks reduces measurement variation and speeds up routine inspections. The combination of a fine adjustment stage and secure magnetic clamping increases confidence in readings and lowers the risk of false rejects. For labelling and traceability tasks, the compact design permits easy storage between uses and rapid redeployment at different stations. Where space and reproducibility matter, the stand contributes to a smoother workflow and helps maintain quality standards across serial checks and setup tasks. For technical consultation or to secure a supply of the Microtech Metrology measuring stand (SKU 161113410), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and delivery options Technical Data Article number: 161113410 GTIN: 4061905047497 Brand: Microtech Metrology Category: Magnetic stands Facts Magnetic force: 130 Base dimensions: 50 x 120 x 55 mm Cross arm: 250 x 18 mm Column: 400 x 25 mm Special features Fine adjustment for precise positioning Magnetic plate for secure clamping Suitable for dial and test indicators Compact footprint for bench and inspection use FAQ What surfaces are required for secure clamping? The measuring stand requires a ferrous, flat surface for the magnetic plate to engage properly; the magnetic base provides the holding characteristic listed under the technical facts. Can the stand be used with dial and test indicators? Yes, the Microtech Metrology measuring stand (SKU 161113410) is designed for dial and test indicators and includes a fine adjustment stage for micro‑positioning. How large is the working reach of the arm and column? The column is 400 x 25 mm and the cross arm is 250 x 18 mm, which together provide a practical reach for most workshop inspection tasks. Is the fine adjustment mechanism suitable for repetitive inspection work? The fine adjustment is intended to improve repeatability and reduce repositioning error during repetitive checks, supporting consistent inspection routines. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
420mm Ø20 Column With 390mm Ø16 Cross Arm Chrome Rod Mounting Arm - Metav IndustryLine
Take advantage of a chrome-plated rod assembly with a Ø20 × 420 mm main shaft and a Ø16 × 390 mm cross arm to increase mounting rigidity and measurement reach; the modular design is supplied without a magnet for flexible integration into existing inspection rigs. Order directly via Metav Werkzeuge or consult the Metav specialists for compatibility advice. M208.106.5 measuring stand rod assembly (Ø20×420 shaft, Ø16×390 cross arm) — Metav IndustryLine A M208.106.5 measuring stand rod assembly for precision indicator mounting and modular inspection setups, supplied without a magnet and optimised for stable, repeatable positioning. Chrome-plated rod for corrosion resistance Ø20 × 420 mm main shaft, M12 thread Ø16 × 390 mm cross arm for extended reach Supplied without magnet for modular use Stable anchoring that reduces measurement error The rod assembly is engineered to deliver mechanical stability where repeatable results matter. The Ø20 × 420 mm main shaft, with an M12 fixing, provides a stiff mounting column that resists twist under indicator load, while the Ø16 × 390 mm cross arm gives lateral reach without compromising support. This rigidity reduces vibration and play at the probe tip, translating into fewer re-measurements and a faster inspection loop. The chrome-plated finish also eases cleaning and resists workshop contaminants, so accuracy is maintained over time. Faster setups through a modular, toolroom-ready layout The arm geometry allows quick positioning of dial gauges and indicator holders across a useful working envelope. Supplied without a magnet, the assembly integrates with magnetic bases or dedicated clamps—this modular approach enables one configuration to serve multiple tasks, from bench top quality checks to on‑machine fixtures. The M12 thread at the shaft simplifies secure attachments and interchange of accessory parts, reducing setup times and improving throughput in repetitive tasks. Durable workmanship for everyday industrial use Finished in chrome plating, the component resists corrosion and wear encountered in daily workshop environments, supporting long service intervals and predictable performance. At approximately 1.9 kg, the assembly combines mass for steadiness with portability for flexible use across benches. As part of the Metav IndustryLine, the product benefits from a practical supply chain and quality control that aims to make precision equipment accessible to shops and maintenance departments without compromising specification or reliability. For tailored advice on system compatibility or to reserve the Metav IndustryLine M208.106.5 measuring stand rod assembly, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and prompt supply Technical data SKU: M208.106.5 GTIN: 4054469104669 Weight: 1.9 kg Material: chrome-plated rod Tariff code: 90319000 Core dimensions Main shaft: Ø20 × 420 mm, M12 thread Cross arm: Ø16 × 390 mm Cross arm length: 390 mm Features / Applications Supplied without magnet Designed for use with 208.106.4 bar Category: magnetic stands Suitable for dial gauges and indicator clamps FAQ Is the rod assembly compatible with magnetic bases? The M208.106.5 measuring stand rod assembly is supplied without a magnet and is designed for modular use; it can be mounted on compatible magnetic bases or paired with the 208.106.4 bar for secure positioning. What is the material and finish of the assembly? The M208.106.5 features a chrome-plated rod construction, providing corrosion resistance and easy cleaning for workshop environments. How does this assembly improve measurement stability? With a Ø20 × 420 mm main shaft and a Ø16 × 390 mm cross arm, the M208.106.5 offers increased rigidity and reduced play at the indicator, which helps lower measurement variation and rework. Can the assembly carry standard dial indicators and holders? Yes; the M208.106.5 accepts common indicator clamps and dial gauges, with an M12 fixing on the main shaft for secure attachment of accessories. Is the product delivered as a complete measuring stand? The delivery comprises the rod assembly only (M208.106.5) and does not include a magnet or base; it is intended for integration into existing measuring stand systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
430mm Magnetic Height Gauge Stand 600 N Holding Force, Base 70x46x65mm - TECWERK
Take advantage of a robust combination of 600 N magnetic retention and a versatile 430 mm total height for reliable indicator mounting in inspection and setup tasks; order the magnetic indicator stand directly via Metav Werkzeuge or consult the Metav team for technical advice. Magnetic Indicator Stand R 285 mm — 430 mm height, 600 N holding force (TECWERK) The Magnetic Indicator Stand R 285 mm is a compact magnetic base designed to secure dial indicators and small measuring instruments in workshop inspection, setup and quality control applications. Robust 600 N magnetic holding force Total height 430 mm for versatile setups Arm reach R 285 mm for extended positioning Compact base 70 x 46 x 65 mm Secure retention for accurate measurements A stable fixture is essential for repeatable readings; the magnetic base delivers a clearly specified 600 N holding force, which stabilises the mounted indicator against vibration and minor impacts. This rated magnetic retention reduces movement during contact measurements, supporting consistent probe placement and more reliable comparative readings. The solid retention is especially relevant where tool offsets or datum checks are performed repeatedly, as it minimises measurement uncertainty while preserving the alignment of the measuring instrument. Flexible positioning for diverse inspection tasks The measured overall height of 430 mm combined with an arm radius of R 285 mm enables a broad working envelope while maintaining a compact footprint. This geometry allows placement of the carrier and indicator over workpieces of varying sizes and in tight fixtures without compromising access to measuring points. The compact base (70 x 46 x 65 mm) supports placement on small machine tables or inspection benches, making the stand suitable for bench metrology, lathe setup checks and small-batch quality control where adaptable positioning is required. Built for workshop use and simple integration Constructed for everyday use in production and repair environments, the magnetic support provides a straightforward mounting solution for dial and digital indicators. The simple mechanical design reduces maintenance and allows rapid redeployment between machines and benches, contributing to efficient measurement workflows. Where clear specification and traceable setup are required, this magnetic indicator stand from TECWERK provides the practical balance of holding power, reach and compactness needed to support routine precision tasks. For reliable workshop measurement and specification conformity, contact Metav Werkzeuge to arrange supply of the TECWERK Magnetic Indicator Stand R 285 mm (SKU 4000851657NW) or to request supplementary technical data by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4000851657NW Label: Magnetmessstativ R. 285mm Gesamt-H. 430mm Haftkraft 600 N Product type: Magnetmessstativ Dimensions & performance Total height: 430 mm Holding force: 600 N Arm reach (R): 285 mm Base dimensions: 70 x 46 x 65 mm Features & materials Magnetic indicator stand Manufacturer: TECWERK Packaging unit: 1 UID: 4000851657NW FAQ What holding capacity does the magnetic base provide? The magnetic base offers a holding force of 600 N, which secures the indicator and reduces displacement during comparative or contact measurements for the TECWERK magnetic indicator stand (SKU 4000851657NW). Which dimensions define the working range of the stand? The overall height is 430 mm and the arm reach is R 285 mm, giving a practical working envelope for placing dial or digital indicators across various workpiece sizes. Is the stand suitable for use on machine beds and inspection benches? Yes, the compact base (70 x 46 x 65 mm) and rated holding force make the indicator stand appropriate for secure placement on machine tables and inspection benches in workshop environments. Can additional technical information be requested prior to purchase? Supplementary technical data and clarification on application suitability can be requested from Metav Werkzeuge; reference the TECWERK Magnetic Indicator Stand R 285 mm (SKU 4000851657NW) when enquiring. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
430mm Magnetic Stand With Central Mechanical Clamp, Heavy Duty, M10 - Metav IndustryLine
Take advantage of the combination of stable holding, precise central clamping and fine adjustment for reproducible measurement set-ups; the heavy-duty magnetic base and 430 mm reach speed up inspection tasks and reduce re‑alignment time. Order the magnetic stand directly via Metav Werkzeuge or ask our consultants if clarification is required. M208.109.4 magnetic stand — heavy magnetic base with central mechanical clamp, 430 mm (Metav IndustryLine) M208.109.4 is a magnetic stand designed for secure positioning of dial indicators and measuring probes in workshop and inspection environments; the heavy version features a central mechanical force clamp and M10 thread for versatile fixturing. Heavy magnetic base with central clamp Fine adjustment for micro positioning Compatible with 8 mm stem dial indicators Robust M10 thread for diverse attachments Stable, repeatable holding for inspection tasks The combination of a heavy magnetic base and a central mechanical clamp provides a reliable foundation for measurement operations where repeatability matters. The central clamp locks the column and arm in a single action, eliminating multiple clamping steps and reducing setup time. With integrated fine adjustment, delicate repositioning is possible without disturbing the overall alignment, which is particularly valuable for comparative measurements and short series inspections. Built to deliver consistent contact pressure, the stand supports reproducible results across repeated cycles and shifts. Robust construction and workshop compatibility Constructed as a heavy version with an M10 mounting, the stand balances reach and rigidity: the overall height of 430 mm and the articulated arm dimensions (163 x 139 x 65) provide good access to larger workpieces while maintaining profile stiffness. The base geometry (61 x 50 x 55, M8) offers a compact footprint that centres mass near the magnetic surface for secure adhesion. At approximately 2 kg, the unit is portable enough for bench use yet substantial enough to resist vibration and incidental knocks. The magnetic force: 80 ensures firm attachment to ferrous surfaces, supporting steady measurement conditions in production and inspection areas. Compatibility, versatility and workshop benefits Designed to accept standard inspection tools, the stand accommodates dial gauges and test indicators with an 8 mm stem, enabling immediate use with common metrology instruments. The M10 connection opens the option to fit a range of holders or probe mounts, turning the stand into a flexible fixturing element for measuring, set‑up and run‑out checks. As a practical workshop solution, the unit reduces the need for repeated re‑clamping and streamlines typical measurement workflows, helping to save operator time and minimise the risk of measurement error. For tailored advice on integrating this Metav IndustryLine magnetic stand into existing inspection routines, contact Metav Werkzeuge for technical guidance and procurement assistance. Technical data Article number: M208.109.4 GTIN: 4054469104768 Manufacturer: Metav IndustryLine Facts Overall height: 430 Weight: 2 Magnetic force: 80 Arm dimensions: 163x139x65 Special features Central mechanical force clamp Heavy duty version M10 thread for attachments Fine adjustment included Base dimensions: 61x50x55, M8 Compatible with dial indicators (8 mm stem) FAQ How does the central mechanical clamp improve setup time? The central mechanical clamp locks column and arm in one motion, so the M208.109.4 achieves rapid, repeatable positioning without multiple fastenings, reducing total setup time for inspection tasks. Can this stand hold a standard dial indicator? Yes, the magnetic stand accepts dial indicators and test indicators with an 8 mm stem, making it compatible with common metrology instruments used on shop floors. What does the heavy version mean for stability? The heavy version provides increased mass and a stronger magnetic base, improving resistance to vibration and accidental movement during measurement procedures. Is the M10 thread suitable for custom fixturing? The M10 thread on the stand enables attachment of a variety of holders and probes, allowing integration with bespoke fixtures or probe adaptors. What surfaces are recommended for the magnetic base? The base is designed for ferrous, flat surfaces where the magnetic force of 80 can achieve secure adherence and stable measurement conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
444mm Magnetic Base Stand 330mm Radius 900 N Holding Force M8 Thread - FISSO
Take advantage of the combination of robust holding force, extended reach and standard M8 compatibility for reliable indicator positioning in metrology and workshop applications; order the unit directly via Metav Werkzeuge or request further technical advice from the consultants. STRATO-LINE magnetic measuring stand — 330 mm reach, 900 N holding force (FISSO) The STRATO-LINE magnetic measuring stand is a compact magnetic base with an adjustable arm for precise positioning of dial and test indicators in inspection benches and general workshop metrology. 900 N magnetic holding force 330 mm adjustable reach Total height 444 mm for extended reach M8 threaded fitting for standard indicators Secure holding for consistent measurement accuracy The high 900 N holding force of the magnetic base provides a stable platform that reduces unwanted movement during measurement, which directly improves precision and repeatability. The holding force value describes the maximum pull the base exerts on a ferrous surface when fully engaged; this quantifiable specification helps planners and quality engineers compare bases objectively. Stability during probing and gauging contributes to faster setup and fewer rechecks in routine inspection tasks. Flexible reach and compatibility with common indicators The adjustable arm delivers an action radius of 330 mm and a total height of 444 mm, enabling access to a wide range of test points without repositioning the workpiece. The integrated M8 thread conforms to common indicator stems and accessory fittings, allowing straightforward mounting of dial indicators and digital probes. This standard interface minimises the need for adaptors and streamlines integration into existing inspection jigs, reducing downtime and simplifying inventory management. Practical design for workshop and inspection use Built for everyday metrology tasks, the magnetic measuring stand combines compact dimensions with practical handling. The design supports rapid clamping to ferrous surfaces and repeatable repositioning, making it suitable for bench checks, machine setup and interim quality control. The robust construction and clear mechanical parameters support a predictable workflow and faster decision-making on the shop floor. If uncertainty remains about suitability or further technical data is required, Metav Werkzeuge offers consultancy and additional specifications on request. For reliable magnetic fixturing and precise indicator positioning, contact Metav Werkzeuge for technical advice and procurement of the FISSO STRATO-LINE magnetic measuring stand. Technical data Article number: 4000851213NW UID: 4000851213NW Manufacturer: FISSO Model: STRATO-LINE Product type: Magnetic measuring stand Packaging unit: 1 Facts Total height: 444 mm Action radius / reach: 330 mm Magnetic holding force: 900 N Thread: M8 Special features Label: STRATO-LINE magnetic measuring stand R. 330 mm; total height 444 mm; holding force 900 N; M8 thread; brand FISSO FAQ What holding capacity does the magnetic base provide? The magnetic measuring stand from FISSO delivers a holding force of 900 N, offering strong retention for secure indicator mounting during measurement. Which indicator stems are compatible with this stand? Compatibility is achieved via the M8 thread: most dial and digital indicators with M8 stems can be mounted directly on the STRATO-LINE measuring stand. What reach and height are available for positioning? The articulated arm provides an action radius of 330 mm, while the stand’s total height is 444 mm, enabling measurements at greater distances without moving the workpiece. Is this stand suitable for general workshop inspection tasks? Yes. The combination of a compact footprint, proven holding force and standard M8 fitting makes the unit well suited for bench inspection, set-up checks and routine quality control in workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Permanent Magnetic Base M8 Thread, 12 kg Pull Force, Round 10.5 mm Height - Metav IndustryLine
Take advantage of a compact, high‑holding anchoring solution that combines a 12 kg magnetic holding force with an M8 threaded connection for straightforward integration into measuring rigs; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Permanent magnetic base M208.124 – round magnetic base with M8 thread and 12 kg holding force (Metav IndustryLine) Permanent magnetic base M208.124 for secure attachment of measuring posts and indicators on flat iron and steel surfaces Compact round base Ø50 mm 12 kg magnetic holding force M8 threaded connection Consistent anchoring for repeatable measurements The Ø50 mm round base delivers a stable contact area that reduces tilting and micro‑movement during inspection tasks. With a 12 kg holding force, the unit secures posts and small instruments on ferrous surfaces, improving measurement repeatability and reducing setup time on the shop floor. The compact footprint supports close‑quarter positioning on fixtures and workpieces while maintaining the necessary clamping power for precision measuring applications. Simple integration with standard stands and posts A standard M8 thread provides universal compatibility with most dial‑indicator stems and support rods, enabling quick mounting without adaptors. The low profile (height 10.5 mm) and light weight (0.2 kg) minimise leverage and user fatigue during repeated adjustments. This design feature ensures efficient workflow: fewer tool changes, faster alignment and a neat, compact measuring station that fits into existing inspection setups. Built for everyday workshop use and accurate fixturing The round magnet base is intended for attachment to flat iron and steel surfaces commonly found in machine shops and assembly areas. Its robustness supports routine metrology tasks such as holding dial indicators, test indicators or small measuring posts. The construction balances durability with portability, allowing easy repositioning while retaining secure fixturing for dimensional checks and setup procedures. Trusted supply and practical advantages Sourced under the Metav IndustryLine portfolio, the component benefits from Metav’s quality assurance and European distribution network. The combination of standard thread connection, proven magnetic performance and compact dimensions makes it a cost‑effective choice for workshops seeking reliable fixturing without over‑engineering. This practical solution helps reduce setup variability and supports a smoother production flow. Choose the Metav IndustryLine permanent magnetic base for reliable, space‑saving fixturing and contact Metav Werkzeuge for purchasing or technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M208.124 GTIN: 4054469151588 Weight: 0.2 kg Holding force: 12 kg Thread: M8 Foot Ø x H: 50 x 10.5 mm Shape: round Suitable for: measuring posts on flat iron and steel surfaces Tariff number: 90319000 Facts Diameter: 50 mm Height: 10.5 mm Mass: 0.2 kg Magnetic force: 12 kg Thread size: M8 Special features Round design for compact placement Compatible with standard indicator stems Lightweight for easy repositioning FAQ How strong is the magnetic holding force? The permanent magnetic base M208.124 provides a holding force of 12 kg, suitable for securing measuring posts and small indicators on ferrous surfaces. Which thread size is provided for mounting? An M8 threaded connection is fitted to the magnetic base, offering direct compatibility with common dial‑indicator stems and support rods. On which surfaces can the base be used? The unit is designed for attachment to flat iron and steel surfaces; non‑ferrous surfaces require a ferrous backing for magnetic anchoring. What are the dimensions and mass of the base? The base measures Ø50 mm with a height of 10.5 mm and weighs 0.2 kg, providing a compact balance between holding power and portability. Is this magnetic base suitable for workshop and inspection use? Yes, the Metav IndustryLine permanent magnetic base M208.124 is intended for workshop fixturing and routine inspection tasks where secure, repeatable positioning of indicators is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Height Scriber With Fine Adjustment 0.02mm Resolution, HM Scriber Needle - TECWERK
Benefit from robust stability, smooth fine adjustment and a carbide-tipped scribing needle that delivers reliable marking precision; order directly via Metav Werkzeuge or contact our consultants for specification advice. TECWERK Height Gauge 500 mm – 0.02 mm reading, carbide-tipped scriber The TECWERK Height Gauge 500 mm is a workshop-grade height scribing device designed for precise vertical measurements and durable layout marking in industrial and trade environments Solid base for maximum stability Sturdy, heavy-duty column design Fine adjustment for precise scribing Carbide-tipped scribing needle Consistent marking precision for production workflows The instrument delivers a clear benefit in routine layout and measurement tasks thanks to its 0.02 mm reading capability and direct mm scale. The finely graduated scale, combined with the built-in fine adjustment, allows controlled approach to the workpiece so scribed lines are placed accurately without overshoot. The carbide-tipped scribing needle provides long service life and consistent contact quality; carbide (cemented hard metal) maintains a sharp point for repeatable marking, which reduces rework and speeds up setup sequences. For operators less familiar with measuring terminology, a 0.02 mm reading means the device resolves changes in height down to two hundredths of a millimetre, suitable for many metalworking and fabrication tasks where visible layout marks and close tolerances are required. Built to withstand workshop demands and simple to handle A massive base and a robust column form the mechanical backbone of the gauge, delivering lateral stability and minimising tip movement during scribing. The glare-free chrome-plated reading parts improve legibility under workshop lighting and help prevent misreading during repetitive tasks. The combination of weight in the base and a rigid column reduces vibration and wobble when the scriber is brought to the part, which benefits both manual layout and integration into inspection benches. Ergonomically, the fine adjustment lets the operator make micro-movements without losing sight of the scale, improving speed and lowering the cognitive load during repetitive measurement routines. Compliance, range and maintenance considerations for long-term use With a measuring range of 500 mm, the gauge is suitable for medium- to large-format layout operations. The equipment is marked as inspection required, so scheduled verification and calibration must be factored into quality routines to maintain traceability and measurement confidence. The instrument is supplied in single-unit packaging per item; calibration should be performed according to internal quality plans or statutory requirements. Where traceable accuracy is needed, the inclusion of the inspection requirement underlines the device’s role within a controlled metrology process, and routine checks will prolong service life and ensure repeatable results. For further technical clarifications or assistance in matching the gauge to a specific application, Metav Werkzeuge provides consultancy and sourcing support. Contact Metav Werkzeuge for tailored advice on the TECWERK height gauge, including calibration options and delivery from our Emmerich site — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements Technical Data Article number: 2000851581NW Label: Höhenanreißgerät 500mm TECWERK Manufacturer: TECWERK Product type: Height gauge UID: 2000851581NW Packaging unit: 1 Facts Measuring range: 500 mm Reading accuracy: 0.02 mm Scale: mm Packaging unit: 1 Inspection required: yes Special features Massive base Massive, sturdy column Fine adjustment Glare-free chrome-plated reading parts Carbide-tipped scribing needle (HM) mm reading Marked as inspection required FAQ What reading accuracy does the TECWERK Height Gauge 500 mm offer? The TECWERK Height Gauge 500 mm provides a reading accuracy of 0.02 mm, enabling precise placement of scribed lines and fine height measurements. Is calibration or inspection necessary for this height scribing device? Yes; the product is designated as inspection required, so the TECWERK Height Gauge 500 mm should be included in regular calibration and verification cycles. Which features support stable and repeatable scribing with this instrument? The massive base and sturdy column of the TECWERK Height Gauge 500 mm, together with the fine adjustment mechanism and carbide-tipped needle, ensure stable, repeatable marking and minimal wobble. What is the useful measuring range for workshop tasks? The gauge offers a 500 mm measuring range, making the TECWERK Height Gauge 500 mm suitable for medium and larger layout and height-measurement operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500mm Magnetic Base Stand With 420mm Ø20 Stem And 390mm Ø16 Crossarm Three-Point Prism Base With On/Off Switch - Metav IndustryLine
Take advantage of the combination of 80 kg holding force, a prismatic sole with on/off switch and precise fine adjustment to secure repeatable indicator readings and faster set‑up at the workbench; order the magnetic stand directly via Metav Werkzeuge or ask our consultants for tailored application advice. Magnetic measuring stand "Bosch" – 80 kg magnetic base, 500 mm height The Magnetic measuring stand "Bosch" is a workshop-grade magnetic base designed to hold dial indicators and small test instruments steadily for inspection and setup work in metalworking and quality control environments. 80 kg magnetic pull with on/off switch Fine adjustment for precise positioning Chrome-plated Ø20 mm column for stiffness Cross arm Ø16 x 390 mm for extended reach A secure foundation for repeatable measurements The combination of a magnetic base with a prismatic sole and an integrated on/off switch provides a reliable anchoring system on ferrous surfaces that reduces slippage during probing and gauging. The high 80 kg holding force is specifically beneficial when working on vertical or irregular surfaces, ensuring stable contact so that readings can be taken without re‑clamping. The practical result is fewer measurement errors and less time spent re‑aligning test equipment, which directly increases throughput in routine inspection tasks. Micro‑adjustment and reach for accurate alignment A mechanical fine adjustment mechanism permits controlled, sub‑millimetre movements of the probe or indicator, enabling precise coaxing into position without disturbing the setup. The chrome‑plated Ø20 x 420 mm column delivers stiffness and resistance to torsion, while the Ø16 x 390 mm cross arm extends reach for awkward or recessed measurement points. Together these features allow accurate orientation of gauges with minimal operator effort, turning a potentially fiddly process into a fast, reproducible step in the measurement workflow. Built for everyday workshop use and compatibility With an overall height of 500 mm and a compact base footprint, this magnetic support balances reach and stability for bench and shop‑floor use; the unit weighs 4.2 kg, which aids portability while preserving robustness. The stanchion and arm are chrome‑plated to resist corrosion and to maintain surface finish where clamping parts and accessories interface. The design suits common dial indicators and test probes used in machine shops and inspection departments, offering a practical, long‑lasting accessory that simplifies set‑ups and sustains measurement quality over repeated cycles. Contact Metav Werkzeuge today to request tailored advice on this Bosch magnetic measuring stand with 80 kg holding force and fine adjustment — Metav Werkzeuge in Emmerich can support specification checks and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M208.106.4 GTIN: 4054469104652 eClass: 21170601 Manufacturer: Metav IndustryLine Facts Magnetic force: 80 kg Overall height: 500 mm Column: Ø20 x 420 mm, M12 Cross arm: Ø16 x 390 mm Weight: 4.2 kg Base dimensions: 75 x 60 x 80 mm Special features Magnet with prismatic sole and on/off switch Fine adjustment for precision alignment Chrome-plated rod and arm M12 thread for accessory mounting Suitable for dial indicators and small test instruments FAQ How strong is the magnetic holding force and what does it mean in use? The magnetic base provides an 80 kg holding force; this ensures secure attachment to ferrous surfaces and reduces the risk of movement during indicator readings. Can the stand be adjusted finely for delicate alignment? Yes, the stand includes a mechanical fine adjustment that allows controlled positional changes for exact indicator alignment. What are the main dimensions to consider when planning a setup? Key dimensions are overall height 500 mm, column Ø20 x 420 mm, and cross arm Ø16 x 390 mm, which determine reach and clearance for most bench and shop applications. Is the unit suitable for portable use between workstations? Weighing 4.2 kg and featuring a compact base, the stand is portable enough for routine repositioning while remaining stable during measurements. Which measurement instruments are compatible with this magnetic stand? The stand is compatible with standard dial indicators and small test probes commonly used in inspection and setup work; the M12 thread and cross arm permit straightforward mounting of typical holders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Magnetic Indicator Stand R. 180mm Reach 800 N Holding Force - TECWERK
Take advantage of the combination of secure fixation, extended reach and compact footprint to improve measurement repeatability on the shop floor; order the magnetic base stand directly via Metav Werkzeuge or consult the specialists for suitability and delivery. Magnetic base stand R. 180 mm — 800 N holding force (TECWERK) Magnetic base stand R. 180 mm is for workshop metrology, offering a 500 mm overall height and a strong magnetic hold for stable indicator positioning across a range of inspection tasks 800 N holding force for secure fixation 500 mm total height for extended reach 180 mm adjustable action radius Compact base 75 x 60 x 80 mm Secure positioning for repeatable measurements The robust construction of this magnetic base provides a measurable advantage in repeatability. With an 800 N holding force, the stand anchors firmly to ferrous surfaces, which reduces micro-movements during readings and contributes to greater precision in comparative measurements. The 500 mm total height allows elevated indicator placement for larger workpieces, while the 180 mm action radius enables fine lateral adjustments without compromising the magnetic grip. These characteristics translate into fewer re-measurements and more efficient inspection cycles. Flexible alignment and rapid set-up for workshop use Designed for practical operation in maintenance benches and production cells, the indicator stand combines stability with user-oriented adjustability. The compact base (75 x 60 x 80 mm) minimises footprint while still delivering a dependable hold, and the articulated arm geometry permits adjustable positioning for awkward contours and limited-access features. The result is faster set-up times and reduced handling effort when mounting dial gauges or lever indicators, making the unit well suited to busy workshop environments where speed and reliability matter. Built for reliable daily use and low upkeep The magnetic measuring stand is engineered for routine inspection tasks and is easy to integrate into existing metrology workflows. Its straightforward mechanical design keeps upkeep minimal, offering low maintenance and long service life under normal workshop conditions. As a product from TECWERK, the stand supports stable measurement practice and consistent results, which is particularly valuable for quality-conscious teams seeking dependable fixtures for everyday checking operations. For an inspection-grade magnetic base from TECWERK, contact Metav Werkzeuge to verify compatibility with existing indicators and arrange prompt delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000851654NW Label: Magnetmessstativ R. 180mm Gesamt-H. 500mm Haftkraft 800 N Manufacturer: TECWERK Product type: Magnetic base stand UID: 4000851654NW Dimensions / Performance Total height: 500 mm Holding force: 800 N Action radius: 180 mm Base (W x D x H): 75 x 60 x 80 mm Packaging unit: 1 Features / Applications Magnetic fixation for metrology tasks Suitable for mounting dial and lever indicators Compact footprint for constrained workspaces Designed for routine workshop inspection FAQ How strong is the magnetic hold and what does that mean for stability? The magnetic base stand delivers an 800 N holding force, which secures the fixture to ferrous surfaces and minimises movement during readings, improving overall measurement stability. Can the stand reach over larger workpieces? Yes, with a 500 mm total height and a 180 mm action radius, the stand enables elevated and lateral positioning suitable for larger components and varied indicator placements. Is the base size suitable for crowded benches or small-fixture areas? The compact base (75 x 60 x 80 mm) was chosen to reduce the occupied area while maintaining secure fixation, making the stand appropriate for constrained workshop spaces. Which product reference should be quoted when ordering or enquiring? Please refer to SKU 4000851654NW when enquiring about this magnetic base stand to ensure correct identification of the TECWERK model. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
50mm Magnetic Base With M8 Threaded Bushing, 24 kg Pull, 10mm Height - Metav IndustryLine
Benefit from a compact, powerful mounting solution that combines a 24 kg holding force with a 50 mm round base and an M8 threaded socket for reliable indicator support; order directly via Metav Werkzeuge or consult our experts for application advice. Permanent magnetic base M208.127 – 50 mm round, 24 kg holding force (Metav IndustryLine) The Permanent magnetic base M208.127 provides a robust mounting point for dial indicators and measuring posts on flat ferrous surfaces in workshop and inspection environments. *Strong 24 kg holding force *Compact 50 mm round base *M8 threaded socket for standard posts *Low-profile 10 mm height Stable holding for precise measurement setups The permanent magnetic base offers a 24 kg magnetic holding power from a compact footprint, giving a stable anchor for measuring instruments and small fixtures. The combination of a 50 mm diameter plate and low mass ensures a predictable contact area on flat ferrous surfaces, reducing micro-movements during readings. With an integrated M8 thread, the base accepts standard indicator stems and accessory posts, enabling straightforward mechanical coupling without additional adapters. This reliability shortens setup time and improves the repeatability of inspection tasks. Space-saving design that frees workshop capacity Engineered for constrained environments, the round base measures 50 mm across with a slim 10 mm profile, allowing the support of indicators or small stands where larger bases would obstruct access. At approximately 0.2 kg it is easy to reposition while remaining sufficiently heavy to resist tipping when attached. The compact form factor benefits bench work and machine‑side checks alike, making it simple to integrate into existing rigs or transient measuring stations without extensive reconfiguration. Ready compatibility with common measuring posts and stands A threaded socket sized M8 x 8 mm provides a standard interface for indicator stems and many small stands, ensuring compatibility with a wide range of accessories. The base is intended for use on flat iron and steel surfaces, making it especially suitable for datum plates, machine beds and jig faces. The overall length of the threaded socket (24 mm) gives a secure engagement for posts while preserving alignment. This straightforward mechanical interface supports fast, repeatable mounting and demounting of gauges during serial inspections. Durable geometry for routine shop use The round base geometry minimises edge‑induced tilting and offers a predictable contact circumference that simplifies placement. Its modest dimensions and robust thread mean fewer components are required to assemble a measuring stand, which reduces inventory complexity and keeps the measuring point both accessible and protected. The product is therefore a practical choice where steady magnetic anchoring is needed without sacrificing portability or workspace economy. For tailored advice on integrating the Metav IndustryLine permanent magnetic base M208.127 into inspection rigs or measuring stands, contact Metav Werkzeuge for application support and fast supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M208.127 GTIN: 4054469151663 Customs tariff number: 90319000 Facts Magnetic holding force: 24 kg Base diameter: 50 mm Base height: 10 mm Weight: 0.2 kg Thread: M8 Thread depth / socket length: 8 mm Overall thread length: 24 mm Special features Round base design M8 threaded socket for indicator posts Suitable for measuring posts on flat iron and steel surfaces Category: Magnetic stands FAQ What holding capacity does the magnetic base provide? The magnetic base delivers a holding force of 24 kg, which provides a stable anchor for light to medium indicator setups and small fixtures. Which thread is fitted to the base and what does it accept? The unit features an M8 threaded socket (M8 x 8 mm) sized for standard indicator stems and many measuring posts; the thread length supports secure engagement. On which surfaces will the base perform best? It is designed for use on flat iron and steel surfaces, such as machine beds, datum plates and jig faces, where full contact ensures maximum magnetic adhesion. Is the base suitable for tight or restricted access areas? Yes. The 50 mm diameter and 10 mm low profile make it well suited to confined setups where larger bases would interfere with tooling or access. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
550mm Articulated Stand Hydraulic, 1000N Magnetic Base - Hörger & Gäßler OHG, Präzisionstechnik
Combine hydraulic damping, a 550 mm action radius and a magnetic base with 1,000 pull force for secure, repeatable positioning of measuring instruments; order the articulated stand directly via Metav Werkzeuge or consult our specialists for application-specific advice. Articulated stand R 550 mm, hydraulic — Hörger & Gäßler The Articulated stand R 550 mm, hydraulic — Hörger & Gäßler is a workshop-grade jointed support designed to hold precision indicators and small measuring instruments with controlled movement and secure magnetic mounting. Hydraulic damping for stable readings 550 mm action radius for extended reach Magnetic base with 1,000 pull force Compact foot 80 x 50 x 55 mm Stable positioning that improves measurement reliability The hydraulic mechanism of this articulated support delivers damped movement that reduces sudden swings and micro‑vibrations during setting and measurement. This results in more repeatable readings and fewer retakes on the shop floor, especially when working with delicate dial indicators or probe heads. The combination of controlled arm motion and a firm mounting solution translates into measurable gains in quality assurance and throughput. Extended reach and compact footprint for versatile mounting With an action radius of 550 mm, the arm enables measurements across a broad working area while occupying minimal bench space. The base footprint of 80 x 50 x 55 mm allows placement on crowded inspection benches or small machine tables without impeding other tooling. The articulated design provides quick angular adjustments, meaning instruments can be repositioned efficiently for different features or parts without losing the original setup. Secure magnetic mounting for stable setups on ferrous surfaces A magnetic base specified with a pull force of 1,000 ensures the stand remains firmly anchored to ferrous surfaces during measurement cycles. This secure hold complements the hydraulic control to keep the instrument steady under operator interaction or minor environmental disturbances. For metrology tasks where a consistent reference position is essential, the magnetic base reduces the risk of displacement and supports dependable dimensional checks. Workshop practicality and application support The jointed stand is suited to routine inspection, bench measuring and light shop use where controlled positioning and quick reorientation matter. As a precision partner, Metav supports customers with application guidance and additional technical data if required — contact info@metav-werkzeuge.com or call +49 2822 7131930 for clarifications on compatibility with specific indicators or mounting adapters. The model’s robust concept provides an efficient balance between flexibility and stability for everyday metrology tasks. Contact Metav Werkzeuge for availability, application advice and procurement of the Hörger & Gäßler articulated stand with 550 mm reach and hydraulic damping Technical data Article number: 4000851502NW Label: Articulated stand R 550 mm, hydraulic, Hörger & Gäßler Product type: Articulated stand Facts Magnetic force: 1,000 Action radius: 550 mm Foot (B x T x H): 80 x 50 x 55 mm Packaging unit: 1 Special features Hydraulic operation Articulated arm Magnetic base Brand: Hörger & Gäßler OHG, Präzisionstechnik UID: 4000851502NW FAQ What load can the articulated stand carry for stable measurement? The articulated stand is designed for small measuring instruments and indicators; the combination of hydraulic damping and the magnetic base with a pull force of 1,000 supports stable mounting for typical dial and digital indicators used in precision inspection. How does the hydraulic function benefit measurement tasks? Hydraulic damping smooths arm movements and limits oscillation, which improves repeatability and reduces measurement errors when adjusting the instrument position on the articulated support. Is the stand suitable for use on small inspection benches? Yes, the compact foot (80 x 50 x 55 mm) and the 550 mm reach make this arm suitable for crowded benches or tight setups while maintaining generous reach for most inspection tasks. Can the articulated stand be repositioned quickly between measurements? The jointed design provides rapid, controlled reorientation; the hydraulic mechanism allows precise adjustments without abrupt motion, aiding efficient measurement workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60kg Magnetic Base M10 With On/Off Switch And Prism Foot - Metav IndustryLine
Take advantage of a compact, high‑holding solution with a 60 kg nominal holding force, an M10 threaded connection and a practical on/off switch for fast clamping and release; order the magnetic base directly via Metav Werkzeuge or ask our consultants for tailored advice. Magnetic base 60 kg M10 (M208.101) by Metav IndustryLine — 60 kg holding force, M10 thread The Magnetic base 60 kg M10 (M208.101) is a compact magnetic mounting with an integrated on/off switch and a prism foot, designed for secure attachment to flat and round machine surfaces and for use with indicator stands in metrology and workshop inspection. 60 kg nominal holding force M10 threaded connection On/off switch for quick release Prism foot for round surfaces Secure mounting for precise measurement and inspection A rated holding force of 60 kg provides a robust foundation for measurement setups, reducing the risk of movement during delicate inspections. The integrated on/off switch changes the magnetic circuit state quickly, enabling safe positioning before activation and fast release afterwards. This combination minimises downtime during repetitive checks and supports consistent measurement routines. The prism foot improves contact on cylindrical or curved workpieces, so readings remain repeatable even when the base is used on shafts or round housings. Compact design that fits standard indicator posts and stands With a threaded M10 connection the base accepts a wide range of indicator posts and extension rods commonly found in metrology kits and magnetic stands. The small footprint and the stated dimensions (59 x 50 x 55 mm) keep the assembly compact and easy to position in confined spaces without compromising stability. The relatively low weight supports quick relocation across the shop floor and simplifies use with portable dial indicators or digital probes, enhancing workflow flexibility in inspection, maintenance and setup tasks. Practical benefits for workshop workflows and reliability Engineered for everyday metrology and quality control, the magnetic base speeds up fixture changes and setup of dial indicators, test indicators and small cameras. The switching mechanism reduces the need for manual clamping force and lowers the chance of inadvertent movement when fixing the base. As a result, measurement cycles become more efficient and less error‑prone, which supports quality assurance targets and shorter inspection lead times. The durable construction and straightforward connection standard mean long service life and compatibility with existing stands. For secure, repeatable inspection setups choose the Metav IndustryLine magnetic base M208.101 — contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich. Technical data Article number: M208.101 GTIN: 4054469104508 ECLASS: 21170601 Tariff number: 90319000 Category: Magnetic stands Facts Holding force: 60 kg Thread: M10 Weight: 1 kg Dimensions: 59 x 50 x 55 mm Special features On/off switch Prism foot for round surfaces Compatible with standard indicator posts Suitable for metrology and workshop inspection FAQ What holding force does the magnetic base provide? The magnetic base provides a nominal holding force of 60 kg, ensuring stable attachment for indicator stands and inspection fixtures. Is the connection compatible with common indicator posts? Yes, the unit features an M10 thread that matches widely used indicator posts and extension rods for measurement setups. Can the base be used on cylindrical surfaces? The prism foot is designed specifically to improve contact on round or cylindrical components, making it suitable for shafts and housings. How does the on/off switch improve handling? The integrated switch enables safe positioning before magnetisation and rapid release afterwards, reducing the risk of incidental movement during setup. What are the physical dimensions and weight? Dimensions are 59 x 50 x 55 mm and the weight is 1 kg, which keeps the base compact and easy to relocate in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60kg Magnetic Base M8 With On/Off Switch And Prism Foot - Metav IndustryLine
Take advantage of the combination of firm magnetic anchoring and compact handling for reliable inspection set-ups; the 60 kg nominal holding force and M8 threaded stud ensure fast, reproducible fixturing for measurement tasks. Order the magnetic base directly via Metav Werkzeuge or ask our consultants if needed. Magnetic Base 60 kg M8 — switchable magnetic mount with prism foot (Metav IndustryLine) The Magnetic Base 60 kg M8 is a compact, switchable holding device for securing indicators and fixtures during inspection and workshop measurement tasks. 60 kg nominal holding force M8 threaded stud for universal mounts Integrated on/off switch and prism foot Stable anchoring for precision inspection A firm magnetic anchor is essential for repeatable measurement. The 60 kg nominal holding force provides a dependable contact to ferrous surfaces, reducing micro‑movement during readings and improving traceability of results. Fitted with an M8 threaded stud, this magnetic mount integrates with common indicator stems and articulated holders used across metrology benches, enabling quick set‑ups and minimising non‑productive time. The result is a measurable increase in workflow efficiency where consistent fixturing matters. Easy operation and versatile contact geometry The integrated on/off switch simplifies positioning: the base can be released for adjustment and re‑engaged without sliding the device across the workpiece, which protects delicate surfaces. The prism foot gives a secure seating on cylindrical parts, preventing lateral slip when measuring shafts or round housings. Compact dimensions of 59 x 50 x 55 mm and a mass of 0.95 kg make handling straightforward, while the design supports rapid repositioning in tight inspection cells. Workshop compatibility and practical benefits Designed for routine shop and inspection use, the magnetic mount connects directly to standard stands and holders via the M8 interface, supporting a broad range of indicator types and fixtures. Its compact footprint preserves access to the component and makes it suitable for fixtures with limited clearance. By reducing set‑up time and improving fixturing stability, the device contributes to lower rework rates and smoother production control in maintenance, quality assurance and assembly operations. Choose the Metav IndustryLine magnetic base for dependable anchoring in your metrology workflow and contact Metav Werkzeuge for ordering or technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M208.100 GTIN: 4054469104492 Tariff number: 90319000 Facts Holding force: 60 kg Thread: M8 Dimensions: 59 x 50 x 55 mm Weight: 0.95 kg Special features Integrated on/off switch Prism foot for cylindrical parts Suitable for magnetic stands and indicator mounting Category: Magnetstative FAQ How strong is the magnetic holding force and what does it mean in practice? The magnetic base provides a 60 kg nominal holding force; in practice this ensures stable fixture contact on ferrous surfaces for consistent measurement and reduced deflection during indicator readings. Can the base be used on round shafts and how is it prevented from slipping? Yes. The prism foot is designed to seat cylindrical parts securely, so the magnetic base holds round components without lateral movement when the magnet is engaged. Which mounting thread is fitted and which accessories will attach? The unit is fitted with an M8 threaded stud, compatible with standard indicator stems, articulated holders and many universal mounts used in metrology benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Magnetic Base M8 Thread 750 N Holding Force, 60 x 50 x 55 mm - HITEC Meßtechnik GmbH
Take advantage of the compact footprint and reliable holding performance for secure instrument mounting in busy workshops; order directly via Metav Werkzeuge or consult our specialists for compatibility and supply options. HITEC Magnetic Base 60 x 50 x 55 mm with M8 Thread A Magnetic Base 60 x 50 x 55 mm built for secure mounting of indicators and small metrology fixtures in confined workshop spaces Compact base 60 x 50 x 55 mm M8 threaded mount for common fittings Strong magnetic holding force 750 Secure, space-saving mounting for precise measurement work The compact design offers a minimal footprint while providing a stable platform for measuring instruments. With a base of 60 x 50 x 55 mm, the unit is suited to tight setups where space is at a premium. The M8 threaded interface accommodates standard stems and fittings commonly used in metrology, enabling straightforward integration with stands and dial indicators. The magnetic holding force of 750 delivers consistent contact to ferrous mounting surfaces, reducing movement during inspection tasks and supporting repeatable measurement results. Fast integration and dependable workshop performance Designed for practical workshop use, the magnetic base combines mechanical simplicity with functional reliability. The M8 thread simplifies mounting and replacement of accessories without specialised tools, lowering setup time and production interruptions. The magnetic contact is designed to maintain grip under normal inspection loads; this ensures stable positioning for both static checks and light dynamic measurements. For users who require clear explanations: the holding force figure denotes the magnetic pull available to resist detachment from a flat ferrous surface, so the higher the value, the more secure the mounting under lateral and vertical loads. Confidence in supply and application advice for professional users Metav stands for democratisation of precision: experienced sourcing and a conveniently central stock in Emmerich ensure robust availability for workshops and industry alike. The combination of straightforward mechanics and well-defined specifications makes this magnetic base a pragmatic choice for production, maintenance and inspection benches. For complex or bespoke setups, Metav Werkzeuge provides application advice and rapid order handling from a broad product range, reducing the need for multiple suppliers and streamlining procurement. Contact Metav Werkzeuge for availability and expert application advice on the HITEC magnetic base; reach us at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss compatibility and delivery from Emmerich. Technical Data Article number: 4000851194NW Product type: Magnetic base Manufacturer: HITEC Meßtechnik GmbH Packaging unit: 1 Facts Dimensions (L x W x H): 60 x 50 x 55 mm Thread: M8 Holding force: 750 Special features M8 threaded mount Compact footprint for restricted spaces Robust magnetic contact for ferrous mounting FAQ What thread size is fitted to the magnetic base? The magnetic base is supplied with an M8 threaded mount suitable for standard indicator stems and small metrology fittings. Which dimensions should be allowed for installation space? Allow for the base footprint 60 x 50 x 55 mm plus clearance for the attached instrument and any adapter fittings. What does the holding force value of 750 indicate? The holding force of 750 indicates the magnetic pull available on a flat ferrous surface; it reflects the base’s capacity to maintain secure contact during inspection tasks. Is the magnetic base suitable for use with dial indicators and small stands? Yes, the magnetic base is designed for secure mounting of dial indicators and small metrology fixtures using the M8 threaded interface. Can the magnetic base be repositioned quickly on the shop floor? The compact design allows quick relocation and remounting on any suitable ferrous surface while maintaining stable contact. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
630x32 Magnetic Indicator Stand with 50x120x55 Base, 500x25 Cross Arm, Fine Adjustment - Microtech Metrology
Take advantage of a compact, highly stable workshop stand that combines a 130 N magnetic holding force with precise micrometric fine adjustment for repeatable set-ups. Order this magnetic stand directly via Metav Werkzeuge or consult Metav's specialists for specification advice and rapid supply. Magnetic Stand — Microtech Metrology magnetic inspection stand with 130 N holding force and fine adjustment The Magnetic Stand offers a stable, adjustable platform for indicator and small-probe mounting in workshop and inspection environments, designed for reliable, reproducible measuring tasks across production and quality-control stations. Fine micrometric adjustment 130 N magnetic holding force Base 50 × 120 × 55 mm for stable support Cross arm 500 × 25 mm, column 630 × 32 mm Stability that secures precise measurements A robust foundation is essential for repeatable readings. The combination of a compact base (50 × 120 × 55 mm) and a 130 N magnetic holding force provides the mechanical stability required to minimise vibration and displacement during measurement. This physical steadiness reduces rework and measurement scatter, helping to uphold process capability and traceability in routine inspection tasks. The construction is particularly suited to bench-mounted indicator setups where a rigid support directly translates into more reliable measurement results. Micrometric control for fast, accurate alignment Built-in fine adjustment enables precise positioning of gauges and probes without repeated coarse realignment. The micrometric control allows for sub-millimetre corrections and smooth, reproducible movement, shortening set-up time and reducing operator influence on the measurement result. For tasks that require careful alignment—such as comparing run-out or checking small tolerances—the fine adjustment is a practical efficiency gain that improves throughput while maintaining metrological confidence. Practical reach and workshop compatibility A long cross arm (500 × 25 mm) and a sturdy column (630 × 32 mm) extend the working range while keeping the assembly compact enough for a typical inspection bench. The overall geometry supports a wide variety of indicator positions and measurement orientations, making the stand adaptable across inspection, maintenance and small-series production contexts. The design emphasises straightforward handling and secure clamping, ensuring quick repeat tasks without sacrificing positional accuracy. Microtech Metrology engineering ensures component fit and function for durable everyday use. For tailored measurement solutions and reliable supply of the Microtech Metrology Magnetic Stand with 130 N holding force, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for specification support and prompt delivery. Technical Data Article number: 161113610 GTIN: 4061905047503 Manufacturer: Microtech Metrology eClass: 21170601 Facts Magnetic holding force: 130 N Base (foot): 50 × 120 × 55 mm Cross arm: 500 × 25 mm Column: 630 × 32 mm Fine adjustment: yes Special features Category: Magnetic stands Fine adjustment mechanism Compact magnetic base for bench mounting Suitable for indicator and probe mounting FAQ What holding force does the stand provide? The magnetic base delivers a holding force of 130 N as specified for the Microtech Metrology magnetic stand (SKU 161113610). Does the stand include fine adjustment for alignment? Yes — the product features a micrometric fine adjustment mechanism for precise, repeatable positioning. What are the main dimensions of the base and arm? Base dimensions are 50 × 120 × 55 mm; the cross arm is 500 × 25 mm and the column measures 630 × 32 mm. Is this stand suitable for routine workshop inspection tasks? The combination of a compact, rigid base and extended arm makes the stand well suited to routine inspection and small-series measurement set-ups. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
66 mm Magnetic Base With M8 Thread Round 15 kg Holding Force - Metav IndustryLine
Compact, low‑profile design combined with a reliable 15 kg magnetic holding force and standard M8 thread ensures stable mounting for measuring posts and dial gauges; Order the Permanent magnet base with M8, 15 kg holding force, Ø66 × H10.5 mm directly via Metav Werkzeuge or ask our consultants if needed. Permanent magnet base with M8 thread — 15 kg holding force (Metav IndustryLine) The Permanent magnet base with M8 thread provides a compact magnetic mounting solution for measuring stands and posts on flat iron and steel surfaces, ideal for workshops and inspection benches where quick, repeatable fixation is required. M8 threaded connection for standard posts 15 kg magnetic holding force for stable fixation Compact Ø66 × 10.5 mm base for confined spaces Suitable for measuring rods on flat iron and steel Reliable holding power for precise set-ups The compact magnetic base delivers a measurable 15 kg holding force, giving dependable resistance to lateral and vertical loads during measurement tasks. The integrated M8 thread accepts common posts and adapters used on dial gauge stands and measuring posts, which reduces the need for additional hardware. With a low profile and clearly defined dimensions, the base enables reproducible clamping positions on flat ferrous surfaces, shortening set‑up times and supporting consistent inspection workflows. Space‑saving design that speeds workflow A small footprint and low height keep the centre of gravity close to the mounting surface, improving stability when used in restricted areas or crowded benches. The Ø66 mm base and 10.5 mm height make the component suitable for tight assemblies where a larger base would obstruct access. Weighing approximately 0.3 kg, the unit is easy to reposition by hand, which supports fast changeovers between measurement points without compromising on hold‑down performance. Practical compatibility for workshop metrology As a member of the magnet‑stand family, this base is built to interface with standard measuring posts and stands, enabling secure fixation of gauges and sensors on flat iron and steel surfaces. The round base geometry promotes uniform contact and repeatable placement. For routine inspection, calibration set‑ups or temporary fixturing on ferrous assemblies, the component offers a straightforward, robust option that integrates with existing workshop tooling and reduces mechanical set‑up variability. Contact Metav Werkzeuge today to confirm compatibility with existing posts and to order the M8 permanent magnet base directly — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M208.125 Description: Permanent magnet base with M8, magnetic force 15 kg, Ø66 mm, H 10.5 mm GTIN: 4054469151595 SKU: M208.125 Facts Holding force: 15 kg Diameter: 66 mm Height: 10.5 mm Weight: 0.3 kg Thread: M8 Customs tariff number: 90319000 Special features Round base design Suitable for measuring rods on flat iron and steel surfaces Compatible with measuring stands and posts Compact footprint for confined workspaces FAQ How strong is the magnetic hold? The permanent magnet base provides a holding force of 15 kg on flat iron and steel surfaces, allowing stable fixation for measuring posts and dial gauges. Which thread is provided for mounting? The base features an M8 thread for attachment to standard posts and adapters commonly used with measuring stands. Is this base suitable for dial gauge stands and measuring rods? Yes — the design is intended to secure measuring rods and dial gauge assemblies on flat ferrous surfaces for repeatable measurement set‑ups. Can it be used on non‑ferrous or curved surfaces? The magnetic base is designed for flat iron and steel surfaces; performance is reduced on non‑ferrous or highly curved materials and is not recommended for reliable fixation on those substrates. What are the overall dimensions and weight? Diameter 66 mm, height 10.5 mm, weight approximately 0.3 kg; intended for compact, low‑profile mounting situations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70 x 46 x 65 mm Magnetic Base 60 kg With On/Off Switch And Prism Foot, M10 - Metav IndustryLine
Take advantage of a compact magnetic base that combines 60 kg holding force with a practical on/off switch and a standard M10 threaded stud for fast, repeatable mounting; order directly via Metav Werkzeuge or consult Metav's advisors for specification matching. Magnet M208.106.3 — Magnetic base with 60 kg holding force and M10 thread (Bosch style) A Magnet M208.106.3 magnetic base designed for secure positioning of dial indicators and gauge stands in workshop inspection and measurement tasks 60 kg holding force, reliable clamp On/off switch with prism base Standard M10 threaded stud for mounting Compact and portable at 1.3 kg Fast, secure holding for measurement set-ups The compact magnetic base delivers a 60 kg holding force, allowing rapid fixturing of dial indicators and inspection fixtures without elaborate clamps. The integrated on/off switch disengages the magnet cleanly, speeding up repositioning while preserving the magnetic surface from accidental magnetisation of delicate components. This combination reduces setup time and improves repeatability in routine measuring tasks by providing a stable reference that minimises movement during readings. Standard mounting and compatibility for workshop rigs Equipped with a M10 thread, the magnetic base fits common indicator holders and extension studs used across inspection benches and bench stands. The prism base aids alignment on round or irregular surfaces, so measuring tools rest more securely on shafts and cylindrical parts. At around 1.3 kg, the unit is both sturdy and portable, suitable for bench, machine‑side or mobile inspection carts where a balance of mass and manoeuvrability is required. Practical design for inspection and everyday metrology The device is intended as a purpose-built magnetic mounting aid for metrology work rather than a load-bearing clamp for lifting. The magnetic base is particularly useful for repetitive alignment, comparative checks and temporary fixtures during setup and test runs. Its compact footprint and switchable magnet allow quick changes between jobs, supporting efficient workflows in quality control, maintenance and assembly areas while ensuring consistent positioning for accurate measurements. Choose the Metav IndustryLine magnetic base M208.106.3 for dependable, quick set‑up in inspection applications — contact Metav Werkzeuge for product advice or ordering at info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: M208.106.3 GTIN: 4054469104645 eCl@ss: 21170601 Customs tariff number: 90319000 Brand label: "Bosch" style Facts Holding force: 60 kg Weight: 1.3 kg Thread: M10 SKU: M208.106.3 Special features On/off switch Prism base for cylindrical surfaces Intended for magnetic stands and gauge mounting Compact, portable design FAQ What holding capacity does the magnetic base provide? The Magnet M208.106.3 offers a holding force of 60 kg, suitable for securing dial indicators and small fixtures during inspection. Is the base suitable for cylindrical parts and shafts? Yes, the prism base of the Magnet M208.106.3 improves contact on round surfaces, aiding alignment on shafts and similar components. Which mounting thread is provided for attachment to indicator holders? The unit is supplied with an M10 threaded stud, compatible with standard indicator holders and extension studs. How heavy is the magnetic base for transport and bench work? The Magnet M208.106.3 weighs approximately 1.3 kg, balancing stability with portability for workshop use. Can the magnet be switched off for safe repositioning? The magnetic base includes an on/off switch to disengage the magnet, allowing safe and convenient repositioning without damaging sensitive parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70mm Magnetic Base 46x65mm M10 Thread, 600N Holding Force - TECWERK
Take advantage of a compact footprint and a reliable magnetic hold for faster, more secure set-ups in measurement and clamping tasks; order directly via Metav Werkzeuge or consult our specialists for compatibility and delivery. Magnetic Base B 70 x 46 x 65 mm, M10 – TECWERK The Magnetic Base B 70 x 46 x 65 mm is a compact magnetic mounting foot designed for stable attachment of measurement and clamping accessories, offering an M10 threaded interface for standard adapters. Compact base 70 x 46 x 65 mm Magnetic holding force 600 M10 threaded connection Packaged as a single unit Space-saving design for crowded benches The compact footprint of this magnetic mounting foot—measuring 70 x 46 x 65 mm—reduces obstruction on crowded workbenches and enables precise placement next to other tools and fixtures. A smaller base helps when working in tight set-ups or on machine tables where every millimetre counts; the reduced profile allows the mounting of dial indicators or auxiliary clamps close to the workpiece without introducing interfering mass. The compact dimensions translate directly into easier storage and quicker repositioning during measurement cycles. Consistent holding performance for dependable results With a specified magnetic force of 600, the base provides a steady holding capability that supports repeatable measurement routines and modest clamping tasks. The magnetic adhesion stabilises measuring instruments against lateral drift and vibration, maintaining contact without frequent readjustment. For practical purposes, this level of holding power supports common shop-floor applications where consistent stability is required to preserve measurement accuracy and reduce downtime in inspection sequences. Industry-standard thread for flexible mounting The integrated M10 thread is a widely used connection size in measurement and clamping systems, allowing easy integration with stands, stems and adaptors that conform to industry norms. This compatibility simplifies set-up and reduces the need for custom adapters, which shortens assembly time and minimises inventory complexity. A standard threaded interface ensures that the base can be combined with a broad range of holders for quick conversion between tasks. Practical supply and workshop advantages Delivered as a single unit, the magnetic base supports incremental replenishment of workshop supplies without large minimum quantities. The simple configuration—compact base, magnetic element and M10 interface—keeps maintenance and replacement straightforward, supporting lean inventory practices. For procurement teams, the clear specification and compact form factor help reduce procurement cycles and enable consistent roll-out across multiple benches or sites. Contact Metav Werkzeuge to discuss the TECWERK magnetic base and confirm suitability for specific measurement set-ups — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: 4000851655NW Label: Magnetic Base B 70 x 46 x 65 mm, M10 Product type: Magnetic base Manufacturer: TECWERK Packaging unit: 1 UID: 4000851655NW Core specifications Magnetic force: 600 Dimensions (B x T x H): 70 x 46 x 65 mm Thread: M10 Features & details Compact footprint for confined workspaces M10 threaded connection for standard adapters Packaged as a single unit FAQ What are the exact dimensions of the magnetic base? The magnetic base measures 70 x 46 x 65 mm, giving a compact footprint suitable for tight set-ups. How strong is the magnetic hold? The TECWERK magnetic base is specified with a magnetic force of 600, providing stable adhesion for routine measurement and light clamping tasks. Which thread fits the base? The mounting interface uses an M10 thread, compatible with standard indicator stems and adaptor fittings. Is the product supplied individually or in sets? The item is supplied as a single unit (packaging unit 1), allowing targeted replenishment where needed. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
75 x 46 x 54 mm Magnetic Base With 54mm Lamellae, 60kg Holding Force, M8 Thread, On/Off Switch - Metav IndustryLine
Take advantage of strong 60 kg magnetic holding, lamellae that conform to uneven contact faces and a compact adjustable height for fast, reliable set-ups; order the magnetic base directly via Metav Werkzeuge or consult our advisors if required. Magnetic Base with Lamellae for Uneven Surfaces M208.110 — 60 kg holding force, M8 thread (Metav IndustryLine) The Magnetic Base with Lamellae for Uneven Surfaces M208.110 is a compact magnetic stand designed for attaching measuring instruments to irregular components in workshops and inspection benches. 60 kg holding force with on/off switch Lamellae 54 mm for uneven surfaces Adjustable height up to 15 mm M8 threaded connection for measuring stands Secure holding that speeds up inspection cycles A high 60 kg magnetic force provides firm clamping on ferrous parts, reducing the need for repeated repositioning during measurement tasks. The robust magnetic action shortens set-up time in quality control and fixture tasks, which increases throughput on the shop floor. Built for repeatable performance, the unit’s on/off switch allows safe handling when mounting or removing indicators, lowering the risk of accidental displacement and protecting sensitive probes. Conforms to irregular geometries for dependable contact The integrated lamellae (54 mm) are engineered to redistribute contact pressure across uneven surfaces, enabling stable seating on pitted, curved or oxidised workpieces where flat bases fail. This adaptive contact preserves alignment of measuring tips and supports accurate readings even on imperfect components. The combination of lamellae and adjustable height (up to 15 mm) makes the holder versatile for small positional corrections without changing stands or fixtures. Compact design for flexible workshop integration Weighing 0.7 kg, the magnetic foot is compact yet sturdy, suited to bench-top use and mobile inspection tasks. The M8 threaded interface ensures compatibility with standard measuring stands and dial indicators, simplifying integration into existing metrology setups. The compact format helps maintain accessibility around fixtures while delivering the stability expected in machining and assembly environments, making it a practical choice for workshop and inspection roles. Reliability backed by a precision partner Delivered under the Metav IndustryLine banner, this magnetic base reflects a pragmatic approach to precision: durable mechanics, straightforward operation and compatibility with common metrology gear. Use in routine measurement, fixture support or temporary clamping benefits from a design that prioritises secure contact and operator control. Metav’s distribution presence in Emmerich acts as a quality filter for the European market, ensuring dependable supply and product consistency. Contact Metav Werkzeuge for tailored advice on integrating the M208.110 magnetic base into inspection and fixture workflows Technical data Article number: M208.110 GTIN: 4054469159423 Manufacturer brand: Metav IndustryLine Facts Holding force: 60 kg Thread: M8 Weight: 0.7 kg Tariff number: 90319000 eClass: 21170601 Special features Lamellae 54 mm for uneven contact faces Maximum adjustable height 15 mm On/off magnetic switch for safe operation Suited for magnet stands and measuring probes FAQ What holding force does this magnetic base provide? The M208.110 offers a holding force of 60 kg, sufficient for securing dial indicators and small measuring fixtures during inspection tasks. Is the base suitable for curved or damaged surfaces? Yes, the lamellae design (54 mm) on the magnetic base adapts to uneven or curved surfaces to maintain stable contact and consistent measurements. Which stands and indicators are compatible with the thread? The unit features an M8 threaded connection, compatible with common measuring stands and indicator holders used in workshops. How is the magnetic action controlled during setup? Operation is manual via an integrated on/off switch that allows safe mounting and removal without compromising the position of attached instruments. Can this magnetic base be used for portable inspection tasks? Its compact form and weight of 0.7 kg make the magnetic foot practical for bench-top and mobile inspection duties where reliable temporary clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Magnetic Base 60x80mm M12, 800 N Holding Force - TECWERK
Benefit from a compact footprint, robust M12 thread and a reliable 800 holding value for steady instrument mounting; order directly via Metav Werkzeuge or consult our specialists for application advice. Magnetic base B 75 x 60 x 80 mm M12 by TECWERK — compact magnetic mounting with 800 holding value Magnetic base B 75 x 60 x 80 mm M12 is designed for secure mounting of small measuring instruments and indicator arms in workshop and inspection environments. Compact base 75 x 60 x 80 mm M12 threaded connection for standard mounts Magnetic force 800 for firm holding Stable support for accurate measurements A compact magnetic base with clearly stated dimensions of 75 x 60 x 80 mm delivers a stable platform for precision tasks. The unit’s 800 magnetic rating ensures a firm hold on ferrous surfaces, reducing micro-movements that can skew readings. This stability is particularly valuable when transferring fine contact measurements or when working with sensitive dial indicators; the reduced vibration and secure attachment help preserve measurement integrity and repeatability. Fast, standardised attachment for flexible setups Equipped with an M12 thread, the base integrates easily with common indicator arms and mounting stems used across metrology and inspection benches. The standardised connection simplifies reconfiguration of setups and supports a variety of arm types without the need for adapters. This compatibility reduces setup time, increases workshop throughput and makes the component a practical choice for recurring measurement tasks where quick changes are routine. Compact design to save bench space without sacrificing performance The small footprint keeps the work area organised while still offering stable holding for instruments. The conservative dimensions make the base suitable for crowded benches, fixtures and confined inspection rigs, allowing operators to position gauges close to the workpiece. Despite its modest size, the construction is focused on delivering reliable magnetic contact that supports precision work in tight environments. Built for consistent workshop use Manufactured for routine industrial use, this magnetic mounting element emphasises longevity and uncomplicated handling. The simple mechanical design requires minimal maintenance, and the clear specification of thread and dimensions allows planners to include the item in inventory lists and tool sets with confidence. For shops seeking to streamline measurement stations, the component offers a pragmatic balance of precision, compatibility and compactness. Contact Metav Werkzeuge for personalised technical advice or order placement — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 4000851656NW Label: Magnetfuß B.75mm T.60xH.80mm M12 Product type: Magnetfuß Thread: M12 Magnetic force: 800 Dimensions: 75 x 60 x 80 mm Packaging unit: 1 Facts Magnet force: 800 Dimensions: 75 x 60 x 80 mm Thread size: M12 Packaging unit: 1 Special features Compact magnetic base construction Standard M12 thread for mounts Suitable for mounting small measuring instruments SKU: 4000851656NW Manufacturer: TECWERK FAQ How strong is the magnetic hold? The magnetic hold is specified as 800, which provides firm holding for mounting small indicators and comparable measuring devices with reduced risk of movement during measurement. What thread does the base use for attachments? The base features an M12 thread, allowing direct connection to standard indicator arms and common mounting stems. What are the exact dimensions of the base? The unit measures 75 x 60 x 80 mm, giving a compact footprint for use on crowded benches and inspection rigs. Is this magnetic base suitable for dial indicators and similar instruments? Yes, the design is intended for secure mounting of dial indicators and small measuring instruments; the M12 connection supports standard mounting hardware. What is the SKU for ordering or reference? The article is listed under SKU 4000851656NW and labelled Magnetfuß B.75mm T.60xH.80mm M12 Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8 mm Centre Gauge For Dial Indicator Mounting - Metav IndustryLine
Take advantage of the precise compatibility and compact handling offered by this accessory: the combination of a standard 8 mm stem mount and a lightweight design ensures fast, repeatable centring for inspection tasks, while minimising setup time and operator fatigue. Order the accessory directly via Metav Werkzeuge or contact our consultants for application guidance. Centre Bracket for Dial Indicator 8 mm — 8 mm stem mount, Metav IndustryLine accessory The Centre Bracket for Dial Indicator 8 mm is a compact accessory engineered to accept an 8 mm stem and provide secure centring for dial indicator measurements in workshop and inspection environments. 8 mm stem mount for standard dial indicators Lightweight design, approx. 0.1 kg Secure centring for repeatable position fixing Secure, repeatable positioning for inspection tasks The mounting adapter accepts the 8 mm stem common to many dial gauges and secures the instrument for consistent readings. By providing a stable reference point, the bracket reduces setup variability and supports better repeatability in routine checks. The clear mechanical function—an interface between holding fixture and measuring instrument—helps streamline measurement routines in quality control and bench inspection, resulting in fewer re-measures and a more efficient inspection flow. Compact handling to speed up workshop processes Weighing approximately 0.1 kg, the accessory offers compact handling that simplifies repositioning and alignment on small fixtures or during serial checks. Its low mass lowers operator strain when frequently repositioning the indicator, which in turn shortens cycle times during multi-point inspections. The pragmatic design supports rapid mounting and removal, making the bracket an effective time-saver for repetitive measurement sequences without compromising stability. Practical integration into existing metrology setups Designed as an accessory for dial indicator mounts, the bracket integrates into conventional inspection benches and clamping systems, providing a dependable way to centre indicators for inside, outside or stepped measurements when used in conjunction with standard fixtures. The accessory is listed under accessories for measuring instruments and is supplied with a clear article identifier (SKU: M208.065) for quick procurement and inventory management. For applications requiring a consistent reference, this bracket is a straightforward addition to existing metrology toolsets. Contact Metav Werkzeuge to specify the Centre Bracket for Dial Indicator 8 mm from Metav IndustryLine and ensure the right mounting solution for precise centring in production or inspection workflows Technical data Article number: M208.065 GTIN: 4054469104355 ECLASS: 21170308 HS code: 90179000 Manufacturer: Metav IndustryLine Facts Weight: 0.1 kg Stem diameter: 8 mm Special features Suitable for dial indicator mounting Category: Accessories for measuring instruments Intended for the reception of a dial indicator SKU: M208.065 FAQ Is the bracket compatible with dial indicators that use an 8 mm stem? Yes. The Centre Bracket for Dial Indicator 8 mm is designed specifically to accept an 8 mm stem and secure standard dial indicators for inspection tasks. What is the weight and handling benefit of the accessory? The bracket weighs approximately 0.1 kg, offering compact handling that simplifies repositioning and reduces operator fatigue during repetitive measurements. Can the accessory be integrated into existing inspection fixtures? Yes. The accessory is intended as an add-on for measuring setups and can be mounted within common clamping arrangements to provide a stable centring point for dial indicators. How can the product be ordered or further specified? Specify article M208.065 (Centre Bracket for Dial Indicator 8 mm) when ordering; Metav Werkzeuge can advise on compatibility with specific fixtures and inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80 kg Magnetic Base M10 With On/Off Switch And Prism Foot - Metav IndustryLine
Take advantage of the combination of robust 80 kg holding force, an M10 threaded connection and a user-friendly on/off magnetic control for reliable indicator mounting and swift set‑ups; order the magnetic base directly via Metav Werkzeuge or consult the specialists for tailored advice. Magnetic Base M208.103 — 80 kg holding force, M10 thread (Metav IndustryLine) The Magnetic Base M208.103 is a compact magnetic holding solution for indicator stands and measurement fixtures in machine shops and inspection benches. *80 kg nominal holding force *On/off magnetic control for fast set-up *M10 threaded connection for universal fittings *Prism foot for secure contact with round rods Secure mounting for precision measurement A nominal 80 kg holding force provides a clear, quantifiable basis for stable attachments on ferrous surfaces; this level of grip reduces micro‑movement in comparative and inspection work, improving measurement reproducibility. The magnetic mechanism with an integrated on/off switch enables swift engagement and release without tools, which shortens fixture time and minimises handling errors. The M10 threaded interface matches common indicator stems and attachment posts, ensuring compatibility with standard metrology equipment and simplifying integration into existing setups. The compact form offers a balance of mass and portability while delivering steady support for dial and electronic indicators. Effortless operation with versatile contact geometry The built-in prism base creates a secure seating for round or cylindrical posts, while the flat magnet face maintains stable contact on planar surfaces; this dual contact geometry expands the range of applications from machine tables to cylindrical workpieces. The on/off control prevents inadvertent sliding during repositioning and allows controlled release when changing measurement points. As a result, set‑up times are reduced and workflow efficiency in quality control and workshop inspection is increased, delivering a measurable productivity benefit for repetitive measurement tasks. Workshop resilience and practical dimensions Designed for everyday use in industrial environments, the magnetic base combines rugged construction with manageable weight — approximately 1.2 kg — ensuring easy handling without sacrificing steadiness. The compact dimensions (61 x 50 x 55 mm) make it suitable for confined spaces and bench‑top applications where larger holders would obstruct access. The unit’s nominal holding force and mechanical interface are particularly well suited to indicator stands and magnetic posts used in metalworking, toolroom inspections and assembly control, providing a dependable foundation for repeatable readings and faster set‑ups. Choose the Metav IndustryLine magnetic base for secure, quick and compatible indicator mounting — contact Metav Werkzeuge in Emmerich for precise delivery and specialist advice. Technical Data Article number: M208.103 GTIN: 4054469104539 ECLASS: 21170601 Tariff number: 90319000 Facts Holding force: 80 kg Thread: M10 Weight: 1.2 kg Dimensions: 61 x 50 x 55 mm Special features On/off magnetic control Prism foot for round rods and cylindrical posts Intended for magnetic stands and indicator fixtures Category: Magnetic stands (magnetic bases) FAQ What holding capacity does the magnetic base offer? The magnetic base delivers a nominal holding force of 80 kg, providing stable support for indicator stands and similar measurement fixtures. Which thread is used for attachments? The unit uses an M10 threaded connection, making it compatible with standard indicator stems and mounting posts for measurement setups. Is the base suitable for cylindrical and flat surfaces? Yes, the prism foot secures cylindrical posts while the flat magnet face provides firm contact on planar ferrous surfaces, enabling versatile use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80kg Magnetic Base M8 With On/Off Switch And Prism Foot - Metav IndustryLine
Reliable holding and simple on/off control make this magnetic base an efficient choice for mounting indicator posts; the M8 thread and 80 kg nominal holding force suit standard measuring fixtures and provide consistent clamping in daily workshop use. Order the magnetic base directly via Metav Werkzeuge or ask the consultants if further clarification is required. Magnetic Base M208.102 — Magnetic base with 80 kg holding force and M8 thread (Metav IndustryLine) Magnetic Base M208.102 is a compact magnetic holder for indicator stands and measuring fixtures, combining a strong nominal holding force with an integrated on/off switch and a prism foot for secure contact with round components 80 kg nominal holding force Integrated on/off magnetic switch Prism foot for cylindrical parts M8 threaded connection for indicator posts Firm support where accuracy matters The 80 kg nominal holding force provides a stable foundation for comparators and dial indicators, reducing the risk of movement during measurement. The built-in on/off switch simplifies clamping and release, eliminating the need for auxiliary tools and speeding up setup times. This combination improves process reliability by keeping fixtures secure without sacrificing the ability to reposition quickly. The design therefore supports efficient inspection workflows and predictable measuring outcomes. Precise seating for round and flat workpieces The prism foot allows direct contact with cylindrical surfaces, while the flat areas of the base accommodate planar parts, making the holder suitable for a range of measuring tasks on the shop floor. The M8 thread accepts common indicator posts and accessory stems, enabling quick integration into existing stands and fixtures. These features translate to fewer compatibility issues and a shorter time-to-measure during routine checks and setup operations. Compact footprint and easy handling With overall dimensions of 61 x 50 x 55 mm and a mass of 0.95 kg, the unit combines portability with enough mass to remain steady under load. The compact footprint reduces obstruction around the workpiece and permits closer placement of gauges in tight arrangements. The modest weight keeps manual handling straightforward while the solid magnetic system maintains the necessary holding capacity for everyday metrology tasks. Built for workshop demands Constructed to serve as a practical clamping element in indicator stands and magnetic fixtures, the magnetic base offers predictable performance in repetitive measurement tasks. The magnetic system and mechanical interfaces are designed for regular use, supporting rapid fixturing and repeatable positioning. As part of the Metav IndustryLine range, the holder aligns with the vendor’s focus on delivering accessible, dependable precision tools suited to industrial and trade environments. Choose the Metav IndustryLine magnetic base for secure, fast measurement set-ups — contact Metav Werkzeuge by email or phone to arrange supply or request technical details Technical Data Article number: M208.102 GTIN: 4054469104515 ECLASS: 21170601 Customs tariff number: 90319000 Facts Holding force: 80 kg Thread: M8 Weight: 0.95 kg Dimensions: 61 x 50 x 55 mm Special features Integrated on/off magnetic switch Prism foot for cylindrical parts Threaded M8 connection for indicator posts Category: Magnetstative FAQ Is the holding force sufficient for mounting heavy indicator arrangements? The Magnetic Base M208.102 delivers an 80 kg nominal holding force, which is suitable for most standard indicator stands and moderate accessory loads in workshop and inspection environments. Can the base be used directly on round shafts and tubes? Yes, the integrated prism foot on the Magnetic Base M208.102 is specifically designed for secure contact with cylindrical components, improving stability on shafts and pipes. Which thread size is provided for accessory mounting? The product is supplied with an M8 threaded connection, compatible with common indicator posts and mounting stems used in measuring stands. How portable is the magnetic holder for use at different workstations? Weighing 0.95 kg and measuring 61 x 50 x 55 mm, the unit is compact enough for frequent repositioning while still offering the necessary mass for stable clamping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Magnetic Base With M10 Threaded Bush, 78 kg Holding Force, 18mm Height - Metav IndustryLine
Take advantage of the combination of a 78 kg holding force, a compact Ø80 × 18 mm footprint and an M10 threaded socket for fast, repeatable mounting of measuring stems; order directly via Metav Werkzeuge or ask the consultants for application advice. Permanent magnetic base M208.128 — Magnetic base, 78 kg holding force, Ø80 × 18 mm (Metav IndustryLine) A Permanent magnetic base M208.128 designed to secure measuring stands and indicators reliably to flat iron and steel surfaces for workshop and inspection use. Strong holding force: 78 kg magnetic pull M10 threaded socket, 16 mm depth Compact Ø80 × 18 mm round base Designed for measuring stands on steel Stable support that reduces measurement error The compact Ø80 mm round base concentrates a 78 kg holding force into a small footprint to create a vibration‑resistant contact area. That stability translates directly into more consistent readings when using dial indicators or magnetic stands, since unwanted movement at the support is a common cause of measurement scatter. The permanent magnet design requires no external power, ensuring immediate holding performance and uninterrupted use during routine inspection or set‑up tasks. Fast, secure mounting with industrial threading Equipped with an M10 threaded socket and 16 mm insertion depth, the base accepts standard measuring‑stem fittings for rapid assembly and disassembly. This reduces set‑up time on the shop floor and allows one‑hand operation when repositioning a stand. The threaded interface is compatible with most commercial indicator stems, enabling a straightforward retro‑fit to existing magnetic stands and test fixtures while preserving thread engagement and mechanical safety. Workshop durability and practical handling Weighing approximately 0.5 kg, the unit is easy to manoeuvre yet substantial enough to resist lateral shift when under load. The round, low‑profile geometry keeps the centre of mass close to the contact surface for improved repeatability across successive measurements. The construction is optimised for everyday industrial use: robust mounting, minimal maintenance and portable handling make it a pragmatic choice for inspection benches, assembly lines and jig set‑up. The Metav IndustryLine provenance underlines a focus on consistent supply and technical suitability for trade and industry. Contact Metav Werkzeuge for tailored mounting advice and fast dispatch from Emmerich for applications requiring secure magnetic support on flat steel surfaces Technical data Article number: M208.128 GTIN/EAN: 4054469151670 eClass: 24311390 Customs tariff number: 90319000 Facts Magnetic force: 78 kg Diameter: 80 mm Height: 18 mm Thread: M10 × 16 mm Weight: 0.5 kg Special features Round base Permanent magnetic base (no power required) Suitable for measuring stands on flat iron and steel surfaces Category: Magnetstative FAQ How strong is the magnetic pull of this base? The magnetic base delivers a holding force of 78 kg, which is sufficient for secure mounting of indicators and stems on flat iron and steel surfaces when used as intended. Is the thread compatible with standard indicator stems? Yes — the M10 threaded socket with a 16 mm insertion depth accepts common indicator stem fittings, so the permanent magnetic base M208.128 is compatible with most commercial measuring‑stand stems. Can the base be used on non‑ferrous surfaces? No — the magnetic holding principle requires a ferromagnetic contact (iron or steel); the base is specified for use on flat iron and steel surfaces only. Does the unit require any external power or magnet activation? No external power is needed. The device is a permanent magnetic base, delivering continuous holding force without activation. Is the magnetic base suitable for precision inspection tasks? Yes — the concentrated holding force, compact Ø80 mm footprint and low profile support repeatable set‑ups, making it suitable for workshop and inspection applications that require stable mounting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Reliable positioning for precise measurement at the machine
Magnetic base stands, also known as magnetic stands or magnetic mounting stands, provide stable, repeatable fixation for dial indicators, test indicators and small workpieces directly at the machine. The product group includes everything from heavy-duty units to compact mini versions, all designed to keep measurement devices exactly where they are needed during inspection and setup.
How magnetic base stands work and where they belong
The core of a magnetic base stand is a magnetic block base with a prism-shaped sole on some models for secure mounting on shafts. A multi-jointed adjustable arm with various end fittings carries the measuring instrument and allows fine positioning. Models differ by clamping concept — central mechanical clamping or individual joint adjustment — and by actuation, for example a switchable magnetic base operated via a rotary switch. Typical holding forces are 60 kg or 80 kg for standard bases; mini magnetic stands deliver significantly lower retention suitable for lighter gauges.
Practical benefits that improve workshop efficiency
- Significantly reduced setup time through rapid magnetic fixation and flexible arm positioning.
- Improved measurement stability thanks to high holding force and prism options for shaft mounting.
- Versatile use across inspection, alignment and on-machine measurement tasks with dial indicators and feeler gauges.
- Choice of specialised designs such as hydraulic magnetic stands, vacuum stands and models with fine adjustment for sensitive tasks.
- Compact mini stands for confined spaces where a full-size base would be impractical.
Why Metav is the sensible partner for magnetic base stands
As a precision partner, Metav combines practical range and market trust to make accurate measurement accessible to every workshop. With over 48,000 customers, a selection of more than 250,000 products and a logistics and quality hub in Emmerich that acts as a filter for the European market, Metav ensures reliable supply and knowledgeable product choice. The Metav range focuses on proven workshop solutions such as magnetic clamping prisms and flexible arm stands, supported by product selection guidance for industrial buyers.
In short
Magnetic base stands offer secure, adaptable positioning for on-machine measurement and inspection, reducing setup time and increasing repeatability. Choose between heavy-duty, fine-adjustment and mini options depending on the application.
FAQ
What tasks are magnetic base stands best suited for?
Magnetic base stands are ideal for on-machine measurement, alignment and inspection tasks where a dial indicator or test indicator must be held firmly and positioned precisely.
How strong are the magnets in standard stands?
Standard magnetic base stands commonly provide a holding force of 60 kg or 80 kg, while mini magnetic stands have a lower retention force suited to lighter measuring instruments.
Can magnetic base stands be mounted on shafts?
Yes. Models with a prism-shaped sole and a switchable magnetic base are specifically designed to mount on shafts and cylindrical surfaces, enabling stable positioning for rotational checks.
Which type of adjustment should I choose for fine measurement work?
For sensitive or precision inspection, select a stand with fine adjustment or a model with individual joint clamping; these allow subtle corrections without disturbing the instrument position.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com