Reliable magnetic stands for precise positioning
Magnetic stands provide a stable base for holding measuring instruments and workpieces, delivering repeatable positioning and enabling accurate inspection and setup operations. These systems are used to secure dial indicators, feeler-lever gauges and other measuring devices to machine beds or fixtures, offering flexibility through adjustable arms and swivel joints for exact alignment. Available variants include switchable magnetic base, flexible arm stand and mini magnetic stand, each designed to support different holding forces and practical applications in metalworking. Robust magnetic blocks and prism feet allow mounting on shafts and large parts, ensuring reliable clamping during measurement and setup.
270+55mm Magnetic Base Stand Central Mechanical Clamp 80kg, Plastic Case - Metav IndustryLine
Take advantage of a secure 80 kg magnetic hold combined with a central mechanical clamp and fine adjustment for reliable, repeatable positioning in inspection routines; order directly via Metav Werkzeuge or consult our specialists for application advice. Magnetic Base M208.109.5 — Magnetic stand with central mechanical clamp, 80 kg holding force (Metav IndustryLine) The Magnetic Base M208.109.5 is a compact magnetic stand designed for secure positioning of dial indicators and small measuring devices in workshop and inspection applications. 80 kg magnetic holding force Central mechanical clamping system Fine adjustment for precise positioning Fits dial indicators with 8 mm shank Secure hold for repeatable measurements A robust 80 kg magnetic holding force and the central mechanical clamp ensure that the stand provides a stable reference during measuring operations. This combination reduces micro‑movement and vibration at the contact surface, which supports repeatable measurements when checking runout, set‑ups or comparative checks. The stand is aimed at metrology tasks where stability directly improves throughput and reduces rework. Precise alignment with controlled fine travel Integrated fine adjustment allows millimetre‑precise alignment of the measuring tip without repeatedly loosening the main clamp. The articulated arm gives a practical reach of 270+55 mm, while the overall height of 333 mm provides sufficient clearance for most bench and jig operations. These proportions balance reach with stiffness so that adjustments remain intuitive yet finely resolvable for accurate results. Compact, workshop‑ready design for everyday use With a total mass of 2 kg and compact arm and foot geometries, the stand is easy to handle and re‑position across workstations. The base interface accepts indicators with an 8 mm shank, making it compatible with common dial gauges used in quality control. The low profile and modest weight support flexible deployment without sacrificing the stability required for comparative measuring tasks. Designed to streamline inspection workflows Engineered for routine metrology and shopfloor inspection, this magnetic stand helps reduce set‑up time and supports consistent measurement practices. The central clamping mechanism simplifies locking of the arm in a single action, speeding up repetitive checks. Backed by Metav’s focus on accessible precision, the component is a practical element in productivity‑focused measurement chains. Contact Metav Werkzeuge for tailored advice on integrating the Magnetic Base M208.109.5 into inspection stations and for ordering from our Emmerich warehouse Technical Data SKU: M208.109.5 GTIN: 4054469160672 eClass: 21170601 Tariff number: 90319000 Facts Magnetic holding force: 80 kg Overall height: 333 mm Arm length: 270 + 55 mm Arm dimensions: 115 x 90 x 65 mm Base dimensions: 61 x 50 x 55 mm, M8 Weight: 2 kg Special features Central mechanical clamping system Fine adjustment present Compatible with dial indicators (8 mm shank) Category: Magnetic bases / magnetic stands FAQ How strong is the magnetic hold and what does that mean for workshop use? The magnetic hold of 80 kg gives the Magnetic Base M208.109.5 a secure attachment to ferrous surfaces, reducing movement during inspection and improving the consistency of measurement results. Can the stand be used with standard dial indicators? Yes, the stand accepts dial indicators with an 8 mm shank, making it compatible with the majority of common inspection gauges used in machine shops and quality control. Is fine adjustment available for micro‑alignment? Fine adjustment is integrated, allowing controlled, small‑scale movements for precise positioning without repeatedly releasing the main clamp. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
270mm Magnetic Stand Rod With Central Clamp M8 No Magnetic Base - Metav IndustryLine
Take advantage of the central clamping and compact 270 mm rod length for reliable positioning in measurement setups; the M8 thread allows straightforward integration with standard fixtures and bases. Order the magnetic stand rod directly via Metav Werkzeuge or ask our consultants if needed. Magnetic stand rod M208.109.5S — central clamping, 270 mm, Metav IndustryLine Magnetic stand rod M208.109.5S is a compact support component for measurement stands, providing central clamping and an M8 interface for flexible mounting in inspection and workshop environments Central clamping for secure locking 270 mm rod length with M8 thread Supplied without magnetic base for flexibility Stable support for consistent measurements The central clamping design concentrates the locking force at a single point, reducing twist and ensuring the rod stays in position under load. With an overall height of 278 mm and a compact length of 270 mm, this support is aimed at setups where space is limited but stability is essential. The relatively low mass (0.8 kg) helps to keep the balance of portable rigs while still providing a robust connection to measurement arms or holders. This arrangement benefits process control by reducing repositioning time and improving repeatability of readings on stands and carriers. Simple mechanical interface for fast integration Fitted with a standard M8 thread, the rod is ready to mate with common bases, clamps and accessory plates without adapters. The straightforward mechanical interface reduces procurement complexity and downtime during tool changes. The product is supplied without a magnetic base, which permits selection of a suitable base for the specific application—ferrous magnetic base, fixed clamp or bespoke mounting plate—so that the assembly matches the required holding force and footprint. Traceable identification is provided via the SKU M208.109.5S and GTIN for inventory and asset management. Designed for workshop and inspection versatility The compact support rod is conceived for general measurement tasks in machine shops, quality control benches and toolrooms where modularity matters. As part of the Metav IndustryLine range, the component supports quick reconfiguration of test rigs and checking fixtures, helping to streamline inspection routines. The central locking mechanism and standard thread give clear advantages in set-up speed and long-term reliability, making the rod a practical choice for repetitive measurement sequences and portable gauge assemblies. For compatibility guidance, accessory recommendations or to order the M208.109.5S magnetic stand rod through Metav Werkzeuge in Emmerich, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M208.109.5S GTIN: 4054469166988 Tariff number: 90319000 Category: Magnetic stands Facts Length: 270 mm Thread: M8 Overall height: 278 mm Weight: 0.8 kg Special features Central clamping Supplied without magnetic base Compact support for measurement stands FAQ Is the rod supplied with a magnetic base? The M208.109.5S is supplied without a magnetic base and features an M8 thread for mounting to the chosen base or fixture. How does the central clamping benefit measurement stability? Central clamping on the support rod provides uniform locking force and reduces torsion, which improves positional repeatability during inspections. What are the key dimensions and mass for planning fixtures? Length is 270 mm, overall height is 278 mm and the weight is 0.8 kg; these values are intended for layout and balance calculations. Can the rod be used with different bases and accessories? The M8 thread and compact form factor allow straightforward integration with standard magnetic bases, clamps and mounting plates commonly used in workshop measuring equipment. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
280mm Central Clamp Measuring Stand Rod With M8 Thread Central Mechanical Force Clamp - Metav IndustryLine
Take advantage of a central mechanical clamp, standard M8 compatibility and a compact 280 mm reach to improve repeatability and simplify set-up in production and inspection tasks; order directly via Metav Werkzeuge or consult the specialists for system integration. Measuring rod for magnetic stand M208.109.S — central mechanical clamp, 280 mm (Metav IndustryLine) Measuring rod M208.109.S for magnetic indicator stands, providing a compact extension with a central mechanical force clamp for reliable fixation in workshop and inspection environments. Central mechanical force clamp for secure fixation 280 mm reach for compact setups M8 thread for standard accessory fittings Consistent clamping for repeatable results A centrally mounted mechanical clamp delivers a defined clamping action that reduces variation between set-ups. By focusing the locking force around the rod axis, the central mechanical clamp stabilises the holding position and minimises shifting during measurement cycles, which supports repeatability across serial checks. The result is fewer adjustments, faster changeovers and a measurable improvement in process reliability for inspection tasks. Compact reach with broad compatibility The 280 mm effective length and standard M8 thread make this extension ideal where space is limited but stable positioning is required. With an overall height of 293 mm and a nominal mass of 0.3 kg, the component is easy to position on magnetic bases and integrates with common indicator accessories. The compact geometry keeps the arm rigid while remaining suited to tight setups in machine shops, toolrooms and metrology benches, ensuring consistent probe placement without undue bulk. Workshop-grade design that reduces downtime Designed as a pragmatic component for magnetic indicator stands, the post combines simple mechanical design with serviceable features to keep installations straightforward. The use of a mechanical force clamp eliminates dependency on spring tolerances or complex mechanisms, making maintenance predictable and spare-part needs minimal. Supplied under the Metav IndustryLine range, the item benefits from Metav Werkzeuge’s quality filtering and logistics, helping to keep inspection routines uninterrupted and procurement lean. Contact Metav Werkzeuge to confirm fitment, request the M208.109.S specification sheet and arrange supply for immediate deployment in existing magnetic stand systems Technical data Article number: M208.109.S GTIN: 4054469104782 eClass: 21170601 Facts Length / reach: 280 mm Overall height: 293 mm Thread: M8 Weight: 0.3 kg Tariff number: 90319000 Special features Central mechanical force clamp Intended for magnetic indicator stands Metav IndustryLine product family FAQ What mounting standard does the rod use? The measuring rod uses an M8 thread, making it compatible with standard accessory fittings and magnetic bases designed for M8 connections. Is this post suitable for compact inspection setups? Yes, the 280 mm reach and compact profile are intended for tight workspaces and bench-mounted magnetic stands where rigidity and minimal overhang are priorities. How does the central mechanical clamp improve measurement stability? The central mechanical clamp on this stem concentrates the clamping force centrally, reducing lateral play and delivering a repeatable locking position for successive measurements. What are the dimensional and weight specifications? Overall height is 293 mm and the nominal weight is 0.3 kg, providing a balance of stiffness and manoeuvrability for workshop use. Which product reference should be ordered for this measuring rod? Order reference M208.109.S from the Metav IndustryLine range; the SKU and GTIN help ensure the correct magnetic stand extension is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
290mm Magnetic Base Stand 80kg Prismatic Base On/Off Switch, Chrome Rod Ø16x230mm, Crossarm Ø16x220mm - Metav IndustryLine
Stable holding power, precise micrometric positioning and a robust chrome-plated rod combine to deliver reliable instrument mounting for shop and inspection use; order directly via Metav Werkzeuge or consult the advisors for compatibility and delivery. Magnetic measuring stand M208.106.1 ('Bosch') — 80 kg magnetic base, M10 mounting Magnetic measuring stand M208.106.1 provides a compact, high‑holding solution for secure dial‑indicator and gauge positioning in workshop and inspection environments. 80 kg magnetic force with prismatic sole Chrome-plated Ø16 mm rod and cross arm Fine micrometre adjustment for precise set-up Consistent clamping for repeatable measurements The combination of a 80 kg magnetic hold and a prismatic sole ensures that comparators and indicators remain immobile during measurement cycles, reducing measurement scatter and rework. The unit’s fine adjustment mechanism enables controlled micro‑movement of the instrument mount, so small alignment steps can be made without disturbing the magnetic hold. This stability supports higher throughput in routine checks and reduces the need for repeated re-clamping. Compact geometry that fits shop fixtures With an overall height of 290 mm and a Ø16 mm rod length of 230 mm, the stand is designed to occupy little bench space while offering sufficient reach for common setups. The cross arm (220 mm, Ø16 mm) gives a practical offset for edge clearance and fixturing. The M10 thread at the mounting point provides a standard interface for many dial indicators and accessory adaptors, simplifying integration into existing metrology rigs. Precision where it matters most For inspection tasks that demand repeatability, the micrometre‑style adjustment converts coarse positioning into fine, measurable steps. The mechanism supports accurate placement of dial indicators and small probes, helping to maintain traceable measurement conditions. The robust magnetic hold in combination with controlled adjustment reduces operator influence on the measurement result, a clear rational advantage in process control. Durable materials for everyday workshop use The main support is chrome-plated, offering resistance to workshop wear and easy cleaning after use. At a working weight of 2.15 kg the stand balances portability with sufficient mass to damp vibration during brief probing operations. The magnetic base includes an on/off switch, enabling rapid attachment and release without compromising safety or surface contact quality. Designed to improve inspection efficiency By marrying secure holding power with micrometric adjustment, the stand streamlines set-up and measurement routines. Faster and more reliable positioning translates into fewer interruptions on the production floor and steadier results for quality documentation. The construction focuses on practical utility: robust mountings, standard thread interfaces and accessible adjustment controls all support measurable gains in day‑to‑day efficiency. Trusted supply and workshop support Metav’s IndustryLine distribution offers a consistent supply chain and quality screening for metrology tools, backed by a broad product range and longstanding customer trust. The provided documentation and clear specification make integration into inspection workflows straightforward, while the product’s compact design supports use across bench, jig and fixture applications. Contact Metav Werkzeuge for tailored advice and assured delivery from Emmerich regarding the M208.106.1 magnetic measuring stand and its suitability for specific indicator setups Technical data Article number: M208.106.1 GTIN: 4054469104621 Manufacturer: Metav IndustryLine Brand indicated: "Bosch" Tariff number: 90319000 Facts Weight: 2.15 kg Magnetic force: 80 kg Overall height: 290 mm Rod length: 230 mm Rod diameter: Ø16 mm Cross arm length: 220 mm Cross arm diameter: Ø16 mm Base dimensions: 70 x 50 x 55 mm Thread: M10 Special features Chrome-plated rod Prismatic magnetic sole with on/off switch Fine adjustment mechanism M10 mounting interface Category: Magnetic stands FAQ What holding force does the magnetic base provide? The Magnetic measuring stand M208.106.1 features an 80 kg magnetic holding force, delivered via a prismatic sole with on/off control. What are the rod and cross arm dimensions? The support rod is Ø16 mm and 230 mm long, the cross arm is Ø16 mm and 220 mm long; the overall height is 290 mm. Is a fine adjustment available for precise positioning? Yes, the stand includes a micrometre-style fine adjustment that enables controlled, repeatable alignment of dial indicators. What type of magnetic base and switch does the stand use? The base is a prismatic magnetic sole equipped with an on/off switch for secure attachment and safe release. Which mounting thread and base size are supplied? The unit uses an M10 mounting thread and the base measures 70 x 50 x 55 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Magnetic Stand Three-Point Central Clamp, Round Permanent Magnet Ø50×10mm 24kg - Metav IndustryLine
Take advantage of the secure holding provided by a permanent magnet foot and the quick, repeatable grip of the mechanical central clamping to keep inspection routines efficient; the compact 310 mm total height and modest 0.5 kg weight simplify handling and storage. Order the magnetic stand directly via Metav Werkzeuge or consult our specialists for application advice. Magnetic stand M208.109.D (Metav IndustryLine) — central clamp, 24 kg permanent magnet The Magnetic stand M208.109.D is a compact inspection mount designed to hold dial gauges and small probes securely for workshop measurement and quality checks, combining robust holding power with fine positional control. Mechanical central clamping for fast secure locking Permanent round magnet foot, 24 kg holding force Fine height adjustment for precise positioning Compatible with 8 mm shank dial gauges Stable support for reliable measurement results A stable mounting base reduces measurement variation and increases repeatability during routine checks. The stand’s permanent magnet foot (Ø 50 mm × 10 mm) delivers a 24 kg holding force that secures the unit on ferrous surfaces, while the mechanical central clamping locks the arm quickly without creep. The combination of a compact footprint and strong magnetic adhesion means inspection tasks are less prone to accidental displacement, supporting consistent results across batch inspections and setup checks. Precise positioning with practical fine adjustment Fine positional control is essential when aligning indicators and microprobes. The integrated fine adjustment mechanism permits small, controlled movements of the holder so that contact pressure and probe alignment can be set accurately. This reduces the need for repeated coarse adjustments and speeds up the measurement cycle. For applications using standard measuring instruments, the stand is specified for dial gauges with an 8 mm shank, enabling quick mounting of common indicator types used in production and maintenance. Designed for workshop efficiency and easy handling Compact overall dimensions — total height 310 mm with an arm measuring 128 × 105 × 46 mm — make the unit well suited to bench-top inspection and confined fixtures. At approximately 0.5 kg, the mount is light enough for repositioning yet heavy enough, in combination with the 24 kg magnetic hold, to remain stable during measurement. The mechanical central clamp offers rapid locking and release, which reduces setup time and supports higher throughput on repetitive measurement tasks. For reliable holding performance and precision positioning choose the Metav IndustryLine magnetic stand M208.109.D and contact Metav Werkzeuge for tailored application advice or ordering support at their Emmerich location Technical data Article number: M208.109.D GTIN: 4054469151694 ECLASS: 21170601 Customs tariff number: 90319000 Facts Holding force: 24 kg Magnet foot: Ø 50 mm × 10 mm Total height: 310 mm Arm dimensions: 128 × 105 × 46 mm Weight: 0.5 kg Special features Mechanical central clamping Fine adjustment present Permanent round magnet foot Compatible with dial gauge 8 mm shank Suitable for workshop inspection and bench use FAQ What surfaces are required for safe magnetic adhesion? The magnetic foot requires clean ferrous surfaces for optimal adhesion; the Metav IndustryLine magnetic stand M208.109.D achieves its specified holding force when mounted on flat steel worktops or machine beds. Can standard dial gauges be mounted directly? Yes, the mount accepts dial gauges with an 8 mm shank and provides a secure coupling for repeatable indicator positioning. How is the holder locked in position? Positioning is secured by the mechanical central clamping, which allows rapid locking of the arm and eliminates play during measurements. Is the fine adjustment suitable for probe alignment in tight tolerances? The built-in fine adjustment enables small, controlled movements that assist in accurate probe alignment and consistent contact pressure during comparative measurements. Does the stand remain stable during light tapping or contact checks? With a 24 kg permanent magnet foot and immediate central clamping, the stand offers high resistance to incidental disturbance during routine contact inspections. Which markets and tasks is this stand intended for? The unit is intended for workshop inspection, machine setup and quality control tasks where compact, repeatable indicator mounting is required; it is particularly suitable for bench-top inspection and maintenance routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Magnetic Base With 60kg Push‑Pull Magnetic Base, Prismatic Foot And On/Off Switch - Metav IndustryLine
Take advantage of a 60 kg magnetic hold, a prismatic base with on/off switch and a compact 300 mm overall height for reliable, repeatable indicator positioning; order the magnetic base stand directly via Metav Werkzeuge or ask our consultants if needed. Magnetic base stand M208.106 — 60 kg magnetic base, Ø16 mm rod (Metav IndustryLine) The M208.106 is a compact magnetic base stand designed for secure indicator mounting and precise positioning in workshop inspection and metrology tasks. 60 kg magnetic holding force Prismatic base with on/off switch Chrome-plated Ø16 mm rod and arm Compact 300 mm overall height Consistent positioning for repeatable measurements A 60 kg magnetic hold combined with a prismatic base reduces slippage on ferrous surfaces, giving a stable reference for comparators and dial indicators. The integrated on/off switch simplifies re‑positioning and minimises set‑up time, which improves throughput in routine inspection work. The assembly’s modest weight and compact envelope support quick transfers between bench, machine or inspection table while maintaining repeatability. Robust construction that endures workshop use The stand features a chrome-plated column and arm with Ø16 mm cross‑sections for torsional stiffness and long service life under daily handling. The threaded mounting interface (M10) accepts common indicator holders and adaptors, enabling secure attachment of measuring instruments. This construction provides the benefit of consistent fixturing with minimal maintenance and a durable finish that resists corrosion and wear in normal workshop environments. Small footprint with flexible mounting options A compact base footprint and a total height of 300 mm keep the unit suitable for tight inspection benches and machine tables where space is at a premium. The configuration yields simple vertical and lateral adjustment for indicator probes, allowing precise alignment to workpieces without elaborate setup aids. Lightweight and portable, the stand supports efficient workflow when multiple measurement points or machines must be checked in sequence. For supply and technical advice on the Metav IndustryLine magnetic base stand M208.106, contact Metav Werkzeuge for tailored recommendations and delivery options Technical data Article number: M208.106 GTIN: 4054469104614 ECLASS: 21170601 Category path: Messgeräte > Magnetstative Core dimensions Overall height: 300 mm Column: Ø 16 mm × 230 mm, M10 Rod diameter: Ø 16 mm Magnet holding force: 60 kg Weight: 2.25 kg Special features Prismatic base with on/off switch Chrome‑plated column and arm Base footprint: 55 × 46 × 70 mm, M10 FAQ What holding force does the magnetic base provide? The magnetic base stand M208.106 delivers a holding force of 60 kg, providing firm contact on ferrous surfaces for stable indicator mounting. Is the column compatible with standard indicator holders? Yes, the column and mounting use an M10 thread and Ø16 mm rod diameter, making the stand compatible with common dial indicator holders and adaptors. How portable is the stand for workshop use? At approximately 2.25 kg and with a compact 300 mm overall height, the M208.106 magnetic base stand is lightweight and easily moved between benches or machines. Does the base include a switch for the magnet? The unit is fitted with a prismatic base and an integrated on/off switch, allowing quick activation and release without auxiliary tools. What construction ensures longevity in daily use? The stand’s chrome‑plated column and arm with Ø16 mm profiles provide stiffness and corrosion resistance suited to workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315+55mm Magnetic Stand With Central Mechanical Clamp, 80kg Holding Force, Plastic Case - Metav IndustryLine
Take advantage of a robust central mechanical clamp and fine microscopic adjustment to secure measuring instruments quickly and repeatably; the combination of a compact form factor and strong magnetic holding force keeps setups stable and efficient. Order the magnetic base directly via Metav Werkzeuge or consult our technical team for application advice. M208.109.6 Magnetic Stand — Central clamping, 315+55 mm, 80 kg holding force The M208.109.6 Magnetic Stand is a compact magnetic base designed for workshop and metrology use, providing secure mounting for dial indicators and test equipment where repeatable positioning and rapid setup are required Central mechanical force clamp for secure locking 80 kg magnetic holding force, quick on/off M8 shank and 8 mm indicator mounting interface Supplied in transport case for safe storage Faster, more reliable clamping for routine measurement tasks The integrated central mechanical clamp locks the arm and stem in a single action, reducing setup time and minimising variability between measurements. With an 80 kg holding force the base adheres securely to ferrous surfaces, which means greater stability during comparative and inspection tasks. This design lowers the risk of indicator movement under load and supports reproducible results, making it an efficient choice for busy production or inspection benches. Precise positioning for dial indicator work A built-in fine adjustment gives micrometric control for the last millimetre of positioning, enabling careful alignment of the gauge tip without losing the initial coarse setting. The magnetic base accepts common indicator fittings via an M8 thread and an 8 mm shank interface, so standard dial indicators can be mounted directly. The controlled micro-adjustment reduces trial-and-error, improving throughput in serial checks and setup operations. Stable support in a compact package The stand balances rigidity and handling ease: with a 383 mm total height and a compact footprint from the modest arm and base dimensions, the unit is easy to position in confined spaces yet offers the reach required for most bench and machine-side tasks. At 2.3 kg weight the base is portable for mobile inspections but has sufficient mass to complement the magnetic hold, helping to reduce measurement scatter caused by unintended movement. Workshop-ready delivery and integration Delivery in a transport case protects the magnetic stand during storage and transit and supports organised tool sets on the shop floor. The quick on/off magnetic function simplifies transfers between measurement points, while the central clamp and fine adjustment prevent over-tightening or loss of repeatability. Integration into common inspection routines is straightforward thanks to the M8 mounting and compatibility with standard indicator shanks, reducing the need for adapters or additional fixtures. For reliable, fast setups choose the Metav IndustryLine magnetic stand and contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M208.109.6 GTIN: 4054469160689 ECLASS: 21170601 Tariff number: 90319000 Facts Total height: 383 mm Arm: 165 x 90 x 65 mm Foot: 74 x 50 x 55 mm Weight: 2.3 kg Magnet holding force: 80 kg Mounting thread: M8 Special features Central mechanical force clamp Fine adjustment included Compatible with 8 mm dial indicator shank Supplied in transport case Compact workshop footprint FAQ What indicators fit this magnetic stand? The stand accepts indicators with an 8 mm shank via the M8 mounting thread; standard dial indicators are compatible with the M208.109.6 magnetic base How strong is the magnetic hold and what does that mean? The magnetic base offers an 80 kg holding force, providing secure adhesion to ferrous surfaces and reducing the chance of indicator movement during measurements Is fine adjustment available for micro-positioning? Yes, a fine adjustment mechanism is integrated to allow precise, micrometric positioning of the mounted indicator for repeatable readings Is the product supplied ready for workshop use? The M208.109.6 is delivered in a transport case to protect the unit and make storage and mobility straightforward for workshop environments What are the key dimensions and weight for planning setups? The total height is 383 mm, arm 165 x 90 x 65 mm, foot 74 x 50 x 55 mm and the weight is 2.3 kg, which aids planning for reach and handling Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
315mm Magnetic Rod With Central Clamp, M8 Thread, Without Magnetic Base - Metav IndustryLine
Take advantage of the combination of central clamping, an M8 mounting interface and a 315 mm stem for fast, repeatable set-ups; the stem is supplied without a magnetic base so the mounting can be tailored to the application. Order the component directly via Metav Werkzeuge or contact our advisers for help choosing a compatible magnetic base. Magnetic stand stem M208.109.6S — central clamping, 315 mm, M8 (Metav IndustryLine) Magnetic stand stem M208.109.6S is a compact, modular replacement or upgrade stem for magnetic measurement stands, designed for inspection benches and workshop use. Central clamping for rapid, secure adjustment 315 mm stem length for extended reach M8 thread for standard magnetic base mounting Faster set-ups with secure central clamping The central clamping mechanism provides a single, stable locking point that reduces play and accelerates assembly of indicator holders and gauges. Because the stem features a standard M8 thread, it is compatible with a broad range of magnetic bases and adapters; this modularity lets workshops choose the magnet or foot that best matches the task. The result is fewer tool changes and shorter measurement cycles, improving throughput while maintaining measurement reliability. Stable support that improves repeatability Built to integrate with magnetic stands and inspection fixtures, the stem’s geometry and mass contribute to reliable support during measurement tasks. With an overall height of 328 mm and a mass of 0.9 kg, the component balances reach and damping so that oscillation is minimised when indicators are mounted. This stability translates directly into better repeatability for comparative checks and set-ups, reducing rework and inspection time. Versatile compatibility and simplified inventory Supplied without a magnetic base, the stem can be paired with purpose-selected magnetic feet or mounting plates, reducing unnecessary stock and allowing bespoke combinations for bench work, machine-side inspections or portable measuring rigs. The straightforward construction supports quick replacement in modular metrology systems and keeps maintenance simple, helping to lower total cost of ownership over the life of the equipment. Contact Metav Werkzeuge for assistance in selecting the right magnetic base or to discuss customised configurations — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M208.109.6S GTIN: 4054469166995 Label: Magnetstativ-Gestänge, Zentralklemmung, L= 315 M8, ohne Magnetfuß Manufacturer: Metav IndustryLine Dimensions & Weight Stem length: 315 mm Overall height: 328 mm Thread size: M8 Weight: 0.9 kg Features & Compatibility Central clamping mechanism Supplied without magnetic base Compatible with standard M8 magnetic bases Category: Magnetic stands FAQ Is a magnetic base included with the stem? No. The stem is supplied without a magnetic base so a compatible magnet or mounting plate can be chosen separately to suit the application. Which thread is used for mounting to a magnetic base? The stem uses an M8 thread for base mounting, ensuring compatibility with common magnetic feet and adapters. What is the effective reach of the stem for indicator mounting? The stem offers a 315 mm length and an overall height of 328 mm, providing extended reach for bench and machine-side inspections. How heavy is the stem and what does this mean for stability? The stem weighs 0.9 kg; this mass helps dampen minor vibrations and contributes to stable indicator readings when mounted on a suitable base. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
320 mm Flexible Measuring Stand With Clamp Collet And Mechanical Central Locking, For Rods Ø35mm And Sheets Up To 30mm - Metav IndustryLine
Take advantage of rapid, repeatable set-up thanks to fine adjustment and a mechanical central clamp, combined with compatibility for 8 mm indicator stems — order directly via Metav Werkzeuge or consult our specialists for configuration advice. Flexible indicator stand M208.108.Z — flexible gooseneck with clamp for pipes and sheet The Flexible indicator stand M208.108.Z is a compact measuring support designed to hold dial indicators and comparators steadily in workshop and inspection environments, offering controlled alignment for pipes up to 35 mm diameter and sheet metal up to 30 mm. Flexible gooseneck arm for precise positioning Mechanical central clamp for secure fixation Compatible with 8 mm indicator stems Fits pipes up to Ø35 mm and sheet to 30 mm Repeatable readings through precise positioning A stable measuring set-up reduces variability and speeds inspection cycles. The flexible gooseneck delivers smooth, intuitive alignment while the fine adjustment mechanism permits micro‑movements for exact probe placement, translating into faster set‑up times and fewer rejected parts. The mechanical central clamp locks the assembly firmly in place, limiting the influence of operator pressure and vibration on results — a measurable gain in process reliability for routine quality checks. Secure clamping across curved and flat surfaces Designed for use on small tubes and sheet components, the stand accepts workpieces up to 35 mm diameter and sheet thicknesses up to 30 mm, enabling one tool to cover common inspection tasks in fabrication and maintenance. The 8 mm mounting sleeve fits most commercial dial indicators directly, avoiding adapters and simplifying inventory. Its low weight supports easy repositioning on the bench or around a jig, while the clamp and central locking ensure a consistent contact force during measurement. Fast integration and robust workshop handling Built for everyday industrial use, the stand brings a practical balance between reach and stiffness across its 320 mm overall height. The flexible arm combined with the central clamp minimises setup iterations, helping technicians maintain throughput without compromising measurement quality. The compact footprint and simple mechanics make the device straightforward to adopt in inspection stations and assembly cells, offering a pragmatic way to elevate measurement consistency across small to medium components. For tailored advice or to obtain the M208.108.Z from stock, contact Metav Werkzeuge — call +49 2822 7131930 or eMail info@metav-werkzeuge.com for prompt assistance and shipping from Emmerich. Technical Data Article number: M208.108.Z GTIN: 4054469104720 Manufacturer: Metav IndustryLine Facts Overall height: 320 mm Weight: 0.8 kg Maximum pipe Ø: 35 mm Maximum sheet thickness: 30 mm Indicator stem mount: 8 mm ECLASS: 21170601 TARIC/HS Code: 90319000 Special features Flexible gooseneck arm Mechanical central clamp for fixation Fine adjustment mechanism present Delivered with clamp jaw for gripping round and flat parts Suitable for dial indicators and comparators FAQ What types of indicators fit the stand? The stand accepts measuring instruments with an 8 mm stem, so standard dial indicators and many comparators mount directly without adapters. Can the stand be used on both pipes and flat panels? Yes. The fixture secures round profiles up to 35 mm diameter and flat material up to 30 mm using the supplied clamp and central locking. How does the fine adjustment improve measurement? The fine adjustment allows precise micro‑positioning of the probe before lock‑down, reducing the need for repeated rough adjustments and improving repeatability. Is the model suitable for workshop use and quick repositioning? The compact 320 mm height and 0.8 kg weight make the stand easy to relocate across benches and jigs while the central clamp ensures stable locking once positioned. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
325 mm Magnetic Base Stand Flexible Arm 60 kg Holding Force With On/Off Switch And Prism Base - Metav IndustryLine
This magnetic indicator stand combines a flexible stem, 60 kg nominal holding force and precise fine adjustment to deliver stable, repeatable inspection setups; order the magnetic indicator stand directly via Metav Werkzeuge or contact the consultants for tailored advice. Metav IndustryLine Magnetic Indicator Stand (flexible stem, 60 kg holding force) The Metav IndustryLine magnetic indicator stand for versatile workshop and inspection use, featuring a flexible rod and a compact prism base for reliable positioning of dial indicators. Flexible stem for precise positioning 60 kg nominal holding force Fine adjustment for accurate centring Prism base with on/off magnetic switch Stable holding and quick setup for inspection workflows The magnetic indicator stand offers a combination of robust holding and ergonomic handling suitable for inspection benches and machine shops. With a 60 kg holding force, the unit secures measuring instruments on ferrous surfaces while the flexible stem permits fast, repeatable alignment. The relatively lightweight 1.35 kg construction keeps the stand portable without compromising stiffness, which reduces setup time and increases throughput during routine quality checks. Precise alignment through refined adjustment features A dedicated fine adjustment mechanism enables micro‑movements for exact indicator positioning, turning coarse placement into accurate centring in seconds. Compatibility with an 8 mm shank dial indicator means common measuring heads can be mounted directly; this simplifies the toolchain for shops using standard indicator stems. The prism base provides stable seating on round or irregular workpieces while the on/off magnetic switch allows safe repositioning without losing the reference point. Designed for repeatability and workshop resilience The compact base footprint (59 x 50 x 55 mm) and a stem height of 325 mm with a total height of 420 mm make the stand well suited to bench and machine‑side measurement tasks where reproducibility is required. The design reduces wobble during measurement cycles, translating into improved measurement consistency and fewer rechecks. Materials and construction deliver practical resistance to daily handling in industrial environments. Practical benefits for metrology and maintenance teams The stand supports common indicator tasks such as bench inspection, alignment checks and set‑up verification. Its flexible rod and fine adjustment limit rework by enabling precise positioning on the first attempt, while the prism base assists with cylindrical parts. For teams seeking an efficient, low‑complexity solution, this indicator stand integrates easily into existing metrology rigs and tooling setups. Contact Metav Werkzeuge for personalised advice and to secure the Metav IndustryLine magnetic indicator stand (SKU M208.108) with 60 kg holding force for dependable inspection tasks Technical data SKU: M208.108 GTIN: 4054469104713 Tariff number: 90319000 Facts Nominal holding force: 60 kg Total height: 420 mm Stem height: 325 mm Weight: 1.35 kg Base dimensions: 59 x 50 x 55 mm, M8 Special features Magnet: on/off switch with prism base Fine adjustment: yes Compatibility: for dial indicator with 8 mm shank Flexible stem for variable positioning Manufacturer: Metav IndustryLine FAQ What is the nominal holding force and how does it affect stability? The Metav IndustryLine magnetic indicator stand provides a 60 kg nominal holding force, which secures the base on ferrous surfaces and increases stability during indicator readings. Can standard dial indicators be mounted on this stand? Yes, the stand accepts dial indicators with an 8 mm shank, making it compatible with common indicator types used in bench and machine‑side measurements. How does the fine adjustment improve measurement results? The fine adjustment allows micro‑positioning of the indicator head, enabling precise centring and reducing the need for multiple setup attempts with the Metav IndustryLine indicator stand. Is the prism base suitable for round workpieces? The prism base is designed to seat on cylindrical and irregular surfaces, improving contact stability for alignment and inspection tasks. What are the dimensions and weight for transport considerations? The stand has a total height of 420 mm, a stem height of 325 mm, base dimensions of 59 x 50 x 55 mm, and weighs 1.35 kg, offering a balance of portability and rigidity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
340mm Magnetic Base Stand Three-Point Central Clamp 60kg/M8 Mechanical Force Lock - Metav IndustryLine
Take advantage of the combination of secure magnetic attachment, central mechanical clamping and precise fine adjustment for dependable indicator positioning and repeatable readings; order the product directly via Metav Werkzeuge or ask our consultants if needed. Magnetic Stand M208.109.1 — central mechanical clamp, 340 mm height, 60 kg magnetic force (Metav IndustryLine) The Magnetic Stand M208.109.1 is a compact workshop stand that provides a rigid, height-stable platform for dial indicators and small measuring instruments, ideally used in inspection benches and machine-shop metrology. Central mechanical clamp for stable positioning 60 kg magnetic force for secure attachment Fine adjustment for precise indicator alignment Compatible with 8 mm shank dial indicators Compact 340 mm height, robust 1.55 kg build Consistent clamping for repeatable measurements The central mechanical clamp ensures that the clamping force is applied uniformly around the column, reducing twist and slippage when locking an indicator. Combined with the 60 kg magnetic force, this design delivers a dependable anchor for comparative and control measurements in workshop environments. The arrangement reduces setup variability so that readings from dial indicators remain consistent over repeated checks. This is particularly valuable for quality control tasks where stability under brief contact or slight knocks prevents false rejects and saves rework time. Precise alignment with compact handling Fine adjustment is integrated to allow micrometric alignment of the measuring tip without resorting to coarse repositioning of the whole stand. The compact column and 340 mm height offer a small footprint while retaining adequate reach for most bench- and machine-mounted checks. The 1.55 kg construction balances portability with rigidity, and the foot features an M8 provision for secure attachment or accessory mounting. The stand’s compatibility with 8 mm shank dial indicators streamlines selection of probes and adapters commonly stocked in metrology sets. Robust attachment and workshop-grade reliability Designed for repetitive use in production and inspection areas, the stand pairs a magnetic base with a mechanically robust column to withstand everyday handling. The magnetic force specification gives a clear, comparable metric for fixation strength during fixturing and short-term measurements. With Metav IndustryLine sourcing, the product is supported by a logistics and quality filter based in Emmerich that aims to make precision accessible for workshops and service providers. The result is a tool that helps to reduce measurement uncertainty through stable fixturing and simple, reliable operation. Choose the Metav IndustryLine magnetic stand for stable, repeatable indicator setups and contact Metav Werkzeuge in Emmerich for ordering advice and fast supply Technical data Article number: M208.109.1 GTIN: 4054469104744 ECLASS: 21170601 Category: Magnet stands Label: Magnetic stand, central clamp, height 340 mm, 60 kg/M8 central mechanical force clamp Facts Height: 340 mm Arm dimensions: 160 x 125 x 45 mm Base / foot dimensions: 59 x 50 x 55 mm, M8 Magnetic force: 60 kg Weight: 1.55 kg Special features Central mechanical clamp for uniform locking Fine adjustment for precise alignment Compatible with dial indicators having an 8 mm shank Compact workshop stand from Metav IndustryLine FAQ What measuring instruments fit this stand? The magnetic stand M208.109.1 accepts dial indicators and similar small gauges designed for an 8 mm shank, providing a standard mounting interface for common inspection tools. How strong is the magnetic base and what does that mean in practice? The base is rated at 60 kg magnetic force, which denotes the holding capability for secure attachment during routine setup and short-term measurements. Is there a micro-adjustment for fine positioning? Yes — the stand includes a fine adjustment mechanism that enables precise alignment of the indicator tip without moving the entire assembly. What are the main dimensions and weight to consider for bench use? The stand has a nominal height of 340 mm, an arm of 160 x 125 x 45 mm, a foot of 59 x 50 x 55 mm with M8 provision, and weighs approximately 1.55 kg. Which brand and SKU should be referenced when ordering or requesting accessories? Reference Metav IndustryLine and SKU M208.109.1 (GTIN 4054469104744) for ordering and accessory compatibility. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
340mm Magnetic Base Three-Point Stand, Central Mechanical Clamp, 80 kg/M8 - Metav IndustryLine
Benefit from a combination of central mechanical clamping, 80 kg magnetic holding force and precise fine adjustment to achieve stable, repeatable indicator positioning in inspection and setup tasks; order the magnetic stand directly via Metav Werkzeuge or ask our consultants for application advice. Magnetic Stand M208.109.2 — central mechanical clamp, 80 kg holding force (Metav IndustryLine) The Magnetic Stand M208.109.2 is a compact indicator holder for stable positioning of dial indicators and measuring instruments on ferrous workpieces in workshop and inspection environments. Central mechanical clamp for uniform grip 80 kg magnetic holding force for stable fixing Fine adjustment for precise indicator positioning Compatible with 8 mm dial indicator mount Reliable hold and consistent clamping for inspection work The M208.109.2 provides a highly stable magnetic base with an 80 kg holding force, designed to secure the stand to ferrous surfaces and reduce movement during measurement cycles. The central mechanical clamp distributes clamping force evenly across the arm connection, which minimises play and ensures repeatable results when the indicator is repositioned. This stability is particularly valuable during repetitive quality checks and set‑up operations, where consistent datum referencing shortens inspection times and reduces rework. Accurate alignment with micro‑adjustment for fine positioning A dedicated fine adjustment mechanism enables smooth, controlled micro‑movement of the indicator head, allowing precise alignment without relying on coarse manual correction. The holder accepts dial indicators with an 8 mm mount, making it compatible with common workshop instruments. The arm measures 160 x 125 x 45 mm, with an overall height of 400 mm and an effective arm height of 340 mm, providing a practical working envelope for most bench and machine‑side applications while maintaining rigidity for accurate readings. Workshop durability and operational convenience Constructed for everyday use, this magnetic stand balances portability and robustness at a weight of 1.55 kg and a compact base dimension of 61 x 50 x 55 mm (M8). Its design supports quick mounting on machine beds or test fixtures, shortening set‑up time and improving throughput. Supplied under the Metav IndustryLine, the product benefits from the company’s quality‑focused sourcing and European distribution: Metav’s Emmerich location acts as a quality filter and guarantees reliable supply for industrial and craft customers, backed by decades of experience and a broad product range. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine magnetic stand with 80 kg holding force into inspection workflows and to arrange delivery to your site. Technical data Article number: M208.109.2 GTIN: 4054469104751 Category: Magnet stands Manufacturer: Metav IndustryLine Facts Magnet holding force: 80 kg Overall height: 400 mm Arm size: 160 x 125 x 45 mm Effective arm height: 340 mm Base size: 61 x 50 x 55 mm (M8) Weight: 1.55 kg ECLASS: 21170601 Special features Central mechanical clamp Fine adjustment included Compatible with 8 mm dial indicator mount Suitable for mounting on ferrous surfaces Fine adjustment enables micro‑positioning FAQ How much holding force does the stand provide on flat steel surfaces? The magnetic base delivers an 80 kg holding force, which secures the stand reliably to flat ferrous surfaces for stable measurement. Can the stand be used with standard dial indicators? Yes, the holder accepts dial indicators with an 8 mm mount, making it compatible with most workshop indicators. Is fine positioning possible without changing the main clamp setting? Yes, the integrated fine adjustment allows precise micro‑movement while the central clamp remains engaged, improving alignment speed and accuracy. What are the dimensions and portability of the stand? The arm measures 160 x 125 x 45 mm, the effective arm height is 340 mm and the overall height is 400 mm; with a weight of 1.55 kg the stand is compact and easy to transport between workstations. Does the central clamp reduce play compared with single‑screw designs? The central mechanical clamp distributes force evenly and minimises lateral play, enhancing repeatability for inspection and set‑up tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
345mm Magnetic Base Stand Central Clamp 60kg M8 With Mechanical Central Force Lock - Metav IndustryLine
Take advantage of a compact inspection stand that combines reliable magnetic holding, smooth fine adjustment and a robust central clamping for reproducible set-ups in daily metrology tasks. Order the magnetic stand directly via Metav Werkzeuge or consult our specialists for application advice. Magnetic Stand M208.109 — Central mechanical clamping, 60 kg magnetic force (Metav IndustryLine) The Magnetic Stand M208.109 is a precision indicator holder for workshop and inspection benches, designed to secure dial indicators and similar gauges for accurate, repeatable measurements. Central mechanical clamping for repeatable locking 60 kg magnetic force for secure holding Fine adjustment for precise positioning Compatible with 8 mm shank dial indicators Secure locking that speeds up inspection cycles The central mechanical clamping provides a fast, unambiguous lock of the arm and post, reducing set-up time and preventing drift during measurement sequences. This central mechanical clamping translates into consistent probe orientation across repeated checks, which is especially valuable when several components must be inspected in succession. With a 60 kg magnetic force, the base delivers dependable adhesion to ferrous surfaces, reducing the risk of accidental movement while handling or adjusting the gauge. Micro‑adjustment for repeatable, high‑quality readings A built‑in fine adjustment mechanism gives smooth, controlled micro‑movement to bring the indicator tip precisely to the measurement point. The adjustable feed is ideal for finishing tolerances and narrow inspection windows where coarse movement would risk overshoot. Compatibility with standard 8 mm shank dial indicators ensures straightforward mounting and broad interchangeability across common metrology tools, supporting a versatile inspection workflow without need for adapters. Practical design for busy workshops and inspection benches The stand’s compact footprint and balanced geometry combine to deliver a stable base that does not consume valuable bench space. The articulated arm and defined mounting thread allow swift repositioning while maintaining rigidity when locked. At a lightweight 1.3 kg, the holder is easy to handle for bench reorganisation yet remains solid enough for repeatable measurements, offering an effective compromise between manoeuvrability and stability for everyday machine‑shop use. Built for compatibility and straightforward integration Threaded fixtures and connection points are aligned with common workshop standards, permitting direct use with indicators and accessories that follow conventional shank and thread dimensions. The combination of M8 thread on the base, a well‑dimensioned arm profile and the central clamping concept makes the unit a reliable choice for measurement tasks where reproducibility and rapid set‑up matter most. The design supports routine inspection, maintenance checks and production‑line sampling without complex fixtures. Discuss application requirements with Metav Werkzeuge in Emmerich to confirm fitment for your inspection bench and secure the right magnetic stand for your workflow — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice Technical Data Article number: M208.109 GTIN: 4054469104737 EClass: 21170601 Category: Magnet stands Core dimensions & performance Magnetic force: 60 kg Overall height: 348 mm Arm dimensions: 128 x 105 x 46 mm Foot dimensions: 59 x 50 x 55 mm Weight: 1.3 kg Design & features Central mechanical clamping Fine adjustment mechanism Compatible with dial indicator 8 mm shank Base thread: M8 Suitable for workshop and inspection bench use FAQ Is the stand suitable for standard dial indicators? Yes. The Magnetic Stand M208.109 accepts dial indicators with an 8 mm shank and is designed for quick, secure mounting. How strong is the magnetic holding power? The base provides a 60 kg magnetic force, offering secure adhesion to ferrous surfaces during typical inspection tasks. Does the stand allow precise micro‑positioning? Yes. The integrated fine adjustment enables controlled micro‑movement for precise alignment of the indicator tip. Can the stand be used on machine beds and inspection tables? The stand’s compact footprint and robust base make it suitable for use on machine beds and inspection benches where a firm magnetic hold is available. What mounting thread does the base use? The base features an M8 thread for standard workshop compatibility with common accessories and fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
345mm Magnetic Indicator Stand Rod Gold With Central Mechanical Force Clamp - Metav IndustryLine
Take advantage of the combination of a central mechanical clamp and a compact gold-coloured column to secure stable, repeatable setups for indicator work; the 345 mm height and light 0.6 kg mass make this column easy to position and integrate with existing magnetic bases. Order the measuring stand column directly via Metav Werkzeuge or consult the Metav team for application advice. Measuring stand column for 208.109.1 (M208.109.G) — gold-coloured with central mechanical force clamp The Measuring stand column for 208.109.1 (M208.109.G) is a precision indicator support intended for use with magnetic bases, combining a central mechanical force clamp and a slim column profile to deliver steady mounting for dial indicators and probes across workshop and inspection tasks. Compact 345 mm column height Central mechanical force clamp Gold-coloured corrosion-resistant finish Lightweight at 0.6 kg Stable support for precise indicator readings The slim column is designed to provide stable mounting for dial indicators and test probes, reducing deflection during contact measurements. With a column height of 345 mm, the unit matches common inspection station layouts while remaining easy to manoeuvre. The central mechanical clamp applies uniform force to the clamped stem, which promotes repeatable measurements and reduces variation introduced at the setup stage. This configuration suits repetitive QA tasks where consistent probe positioning is essential. Fast, repeatable clamping and set-up A central clamp mechanism means secure fixation with a single operation, shortening set-up times and improving throughput in inspection workflows. The mechanical clamp is engineered to transfer clamping force evenly, which avoids tilting and protects fragile indicator stems. The gold-coloured finish provides a recognisable, low-reflective surface that helps inspections under studio or shop lighting, while the unit’s 0.6 kg mass balances portability with enough inertia to resist minor knocks during measurement cycles. Integrates with magnetic-base systems and workshop practice Specified for use with magnetic stands, the column complements existing magnetic bases and stands in machine shops and metrology benches. The compact yet rigid profile supports typical indicator lengths and helps maintain alignment during external, internal and step measurements when used with appropriate probes and holders. Manufactured under the Metav IndustryLine umbrella, the component reflects a workshop-focused approach: robust handling, simple operation and easy integration into standard inspection rigs. Talk to Metav Werkzeuge about the M208.109.G measuring stand column to confirm compatibility with current magnetic bases and secure reliable indicator mounting — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M208.109.G GTIN: 4054469104775 Tariff number: 90319000 Facts Height: 345 mm Weight: 0.6 kg Special features Central mechanical force clamp Gold-coloured finish Compatible with model 208.109.1 Category: Magnetic stands FAQ What is the overall height of the column? The column has an overall height of 345 mm as specified for the M208.109.G measuring stand column. Is the clamp suitable for repeatable indicator positioning? Yes. The central mechanical force clamp on the M208.109.G secures stems evenly to support repeatable measurements. Can the column be mounted on existing magnetic bases? The column is specified for magnetic-stand use and is compatible with the related 208.109.1 magnetic mounting systems. How heavy is the measuring stand column? The column weighs 0.6 kg, providing a balance between portability and sufficient mass for stable setups. What finish does the column have? The column is supplied in a gold-coloured finish, offering a durable, low-reflective surface appropriate for workshop inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
355x16 Magnetic Indicator Stand With 50x120x55 Base, 200x14 Cross Arm, 130 N Holding Force - Microtech Metrology
Take advantage of the combination of fine adjustment, a compact footprint and reliable magnetic hold for repeatable gauge readings on the shop floor; order the magnetic stand directly via Metav Werkzeuge or ask our consultants if needed. Microtech magnetic stand 161113310 — Gauge stand with fine adjustment and magnetic base The Microtech magnetic stand 161113310 is a compact gauge support for workshop and laboratory use, offering a magnetic base and fine-control spindle to position dial and test indicators with high repeatability. Fine-adjustment spindle for precise positioning Magnet strength 130 for secure fixing Base 50 x 120 x 55 mm for stable support Precise positioning that keeps measurements reproducible A magnetic gauge stand must combine stability with the ability to make micro‑corrections: the integrated fine adjustment spindle delivers controlled, incremental movement that avoids overshoot and reduces operator-induced variability. Combined with a secure magnetic base, the construction ensures the indicator tip remains steady during contact measurements, which improves precision and reduces re‑checks. This behaviour makes the stand suitable for routine inspection tasks and small-batch quality control where consistent results save time and minimise scrap. Compact dimensions with workshop-grade stability Despite its modest footprint, the support offers a rigid layout: the base 50 x 120 x 55 mm provides a low centre of gravity while the cross arm 200 x 14 mm and column 355 x 16 mm define a practical working envelope for most bench operations. The specified magnet strength 130 secures the assembly to ferrous surfaces to prevent lateral slips during probing. These attributes make the unit an effective choice for mounting dial indicators, test indicators or digital probes when access is limited and a dependable support is required. Quick setup, versatile use and dependable handling The design favours rapid clamping and repositioning: the magnetic hold allows fast attachment and removal, while the fine-control spindle enables exact lateral or vertical adjustments without repeated coarse moves. As a result, set-up times are reduced and measurement sequences flow more smoothly in both workshop and laboratory environments. Where reproducible alignment and easy handling matter, this gauge stand functions as a practical accessory to measurement benches, inspection jigs and production test stations. For procurement or compatibility advice on the Microtech magnetic stand, contact Metav Werkzeuge in Emmerich for direct ordering and technical consultation Technical data Article number: 161113310 GTIN: 4061905451904 Manufacturer: Microtech Metrology Measurements Magnet strength: 130 Base dimensions: 50 x 120 x 55 mm Cross arm: 200 x 14 mm Column: 355 x 16 mm Fine adjustment: yes Special features Magnetic base for attachment to ferrous surfaces Fine-adjustment spindle for incremental positioning Suitable as a gauge stand for dial and test indicators Category: Magnetic stands FAQ What indicators can be mounted on this magnetic stand? The Microtech magnetic stand accepts standard dial and test indicators and is intended as a stable support for typical bench probes used in workshop inspection. How is the stand fixed to the workbench or machine? Fixing is achieved via the magnetic base; the stand’s magnet strength (130) secures it to ferrous surfaces for stable measurements. Does the stand allow fine lateral adjustment? Yes. The integrated fine‑adjustment spindle enables controlled lateral and vertical movements for precise indicator positioning. What are the main dimensions of the stand? The base measures 50 x 120 x 55 mm, the cross arm is 200 x 14 mm and the column is 355 x 16 mm, providing a compact but practical working envelope. Is the product suitable for both workshop and laboratory use? The robust magnetic hold and fine adjustment make the stand appropriate for both workshop inspection and laboratory measurement tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
360+55 mm Magnetic Base Stand Central Mechanical Clamp 100 kg, Supplied in Case - Metav IndustryLine
Secure magnetic fixturing with a 100 kg holding force and a central mechanical clamping delivers repeatable stability for indicator work; the integrated fine-adjustment spindle provides micro‑positioning across the 360+55 mm reach. Order the magnetic base directly via Metav Werkzeuge or contact our consultants for application guidance. Magnetic base M208.109.7 — Magnetic stand with 100 kg holding force and central mechanical clamping (Metav IndustryLine) Magnetic base M208.109.7 is a compact measuring stand designed for secure mounting of dial indicators and comparable measuring probes, combining a high holding force with a central mechanical clamp and fine adjustment for workshop and bench metrology 100 kg magnetic holding force Central mechanical force clamping Fine-adjustment spindle for precise positioning Compatible with 8 mm indicator shanks Stable anchoring for repeatable measurement results The magnetic base offers a 100 kg holding force, which translates into a secure anchorage on ferrous surfaces and reduces the risk of movement during measurement. The central mechanical clamping concentrates the locking action into a single robust mechanism, simplifying setup and ensuring consistent torque across joints. For quality control and routine shop tasks this stability reduces rework and shortens cycle times, because measurements remain true to position even when the stand supports heavier dial gauges or probes. Micro‑positioning across a practical working envelope A fine-adjustment spindle is built into the arm assembly to allow controlled, small increments when aligning a dial indicator. The arm geometry of 360+55 mm reach, combined with a total height of 423 mm, offers a useful span for typical workshop parts without sacrificing rigidity. The base footprint measures 74 x 50 x 55 mm and includes an M8 thread, enabling secure attachment and compatibility with standard fixtures. The mount accepts dial indicators with an 8 mm shank, so common measuring instruments can be used immediately without adapters. Robust construction and ergonomic handling for daily use Weighing 2.7 kg, the stand balances portability and mass to prevent tip‑over while remaining easy to reposition on the bench. The compact design and short arm lengths reduce flex under load, improving repeatability in comparative and inspection tasks. The mechanical clamp and coarse joints are sized for rapid locking, while the fine-adjustment spindle permits cautious, tactile alignment. Manufactured under the Metav IndustryLine portfolio, the design supports efficient workflows in maintenance, toolroom and production environments. For dependable magnetic fixturing and precise indicator alignment, request the Metav IndustryLine magnetic base M208.109.7 from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and technical advice. Technical data SKU: M208.109.7 GTIN: 4054469160696 Manufacturer: Metav IndustryLine Facts Holding force: 100 kg Total height: 423 mm Arm reach: 360 + 55 mm Weight: 2.7 kg Base dimensions: 74 x 50 x 55 mm Base thread: M8 Special features Central mechanical force clamping Fine-adjustment spindle 8 mm indicator mount Compact, workshop-oriented design FAQ What holding force does the magnetic base provide? The magnetic base delivers a 100 kg holding force, giving stable anchorage for measurement setups with dial indicators and similar probes. Can standard dial indicators be mounted directly? Yes, the stand accepts dial indicators with an 8 mm shank, so most common indicators fit the mount without additional adapters. How is fine alignment achieved on this stand? Fine alignment is performed via an integrated fine-adjustment spindle, allowing controlled micro‑movement of the arm for precise contact and indication. What are the dimensions and weight for workshop planning? The unit has a total height of 423 mm, arm reach of 360+55 mm, base 74 x 50 x 55 mm, and weighs 2.7 kg, suitable for bench use and transfer between stations. Which SKU identifies this product for orders and spare parts? This magnetic base is listed under SKU M208.109.7 in the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360mm Magnetic Rod With Central Clamp M8, Without Magnetic Base - Metav IndustryLine
Take advantage of the combination of secure central clamping, robust M8 compatibility and an extended 360 mm reach for dependable indicator positioning in inspection and workshop routines. Order the magnetic stand rod directly via Metav Werkzeuge or contact our consultants for compatibility advice. M208.109.7S Magnetic stand rod with central clamp — 360 mm, M8 (Metav IndustryLine) The M208.109.7S is a magnetic stand rod with a central clamp, intended to extend the mounting reach for dial indicators and gauge holders in workshop inspection and measurement tasks; supplied without a magnetic base. Central clamping for secure positioning 360 mm length for extended reach M8 thread for standard attachments Supplied without magnetic base Secure mounting for consistent measurements The stem is designed around a single central clamp that provides firm, repeatable fixation with minimal play, reducing set-up time and measurement drift. With a working length of 360 mm and an M8 thread interface, the component offers a balance of reach and rigidity that benefits routine inspection and bench jobs. The construction prioritises steady holding over decorative finishing, so the focus remains on precision and repeatability rather than non‑essential features. Flexible integration into existing inspection rigs Compatibility with standard M8 gauge posts and indicator holders means the rod integrates easily into existing assemblies, enabling rapid configuration changes on the shop floor. Supplied without a magnetic base, the item allows selection of the most suitable base or adapter for the application, whether a low‑profile magnetic foot, a heavy-duty base or a bespoke clamping solution. This flexibility supports efficient workflows and reduces the need for multiple specialised stems. Practical benefits for daily workshop use Lightweight handling and a compact profile simplify positioning and storage while delivering practical stability during measurement tasks. The central clamp reduces the number of adjustment points, so setups are quicker and less error‑prone; this leads to faster inspection cycles and more consistent results across repeated checks. The stem is aimed at machinists and quality technicians who require dependable mounting performance rather than decorative extras. For integration advice or to confirm compatibility with existing indicator holders, contact Metav Werkzeuge about the M208.109.7S and discuss the optimal magnetic base or adapter for the intended application. Technical Data SKU: M208.109.7S GTIN: 4054469167008 Brand: Metav IndustryLine Category: Magnetic stands Supplied without magnetic base Key figures Length: 360 mm Overall height: 368 mm Thread: M8 Weight: 1 kg eClass: 21170601 Special features Central clamp for single‑point tightening Standard M8 attachment thread Compatible with indicator holders and gauge posts Designed for workshop inspection and bench use FAQ What is the working length of this magnetic stand rod? The rod provides a reach of 360 mm; the total overall height is 368 mm for the M208.109.7S from Metav IndustryLine. Is a magnetic base included with the M208.109.7S? No, the M208.109.7S is supplied without a magnetic base to allow selection of the most appropriate base or adapter for the application. Which thread size is used for mounting indicators? The rod uses an M8 thread for attachments, compatible with standard indicator holders and gauge posts commonly used in inspection setups. Can the stem be used with various indicator types? Yes, the M8 interface and the central clamping concept allow connection of a wide range of dial indicators and digital gauge holders for flexible workshop use. How does the central clamp benefit measurement routines? The central clamp offers firm, repeatable fixation with fewer adjustment points, speeding setup and improving repeatability during successive measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
375mm Magnetic Stand Rod M10 Heavy-Duty Central Mechanical Clamp - Metav IndustryLine
Take advantage of the combination of consistent clamping force, robust heavy‑duty construction and standard M10 compatibility to maintain repeatable measurement setups in the workshop. Order the magnetic stand rod directly via Metav Werkzeuge or consult the Metav team for application advice. Magnetic stand rod M208.109.4S — heavy‑duty with central clamp, M10, 375 mm The Magnetic stand rod M208.109.4S is a heavy‑duty extension rod for magnetic measuring stands, offering central mechanical force clamping for stable positioning in inspection and shop‑floor metrology. Robust heavy‑duty construction Central mechanical force clamp M10 thread for standard attachments 375 mm effective length Consistent clamping for repeatable measurement setups The central mechanical force clamp ensures repeatable clamping without the variability introduced by multiple tightening points. The single central tightening mechanism locks the rod with uniform force, reducing play and minimising positional deviation during measurements. This characteristic delivers a reliable basis for indicator mounting and short‑cycle inspection tasks, improving throughput and reducing rework due to unstable setups. The design supports systematic, machine‑shop workflows where reproducibility is essential. Standard interface and sensible reach for workshop use With an M10 thread and a length of 375 mm, the rod sits within common standards for magnetic measuring rigs and attachment systems. The combination of thread standardisation and mid‑range length provides a balance between reach and stiffness: sufficient extension for reach into assemblies while retaining the rigidity needed for accurate readings. The modest mass supports quick handling and repositioning without compromising the firm hold required for dial indicators and small probes. Heavy‑duty build that endures daily use The heavy‑duty execution prioritises robustness and long service life under regular workshop conditions. The mechanically actuated central clamp reduces wear from repeated adjustments and keeps moving parts engaged firmly over time. This results in fewer adjustments during inspection cycles and greater confidence in the stability of the measuring setup, translating to improved operational efficiency and lower downtime for maintenance. Faster setup, fewer adjustments, better workflow Single‑point clamping simplifies assembly and reduces setup time compared with multi‑screw arrangements. The rod is optimised for use with magnetic measuring stands and ensures straightforward integration into existing metrology stations. The outcome is a practical tool for production lines and quality‑control benches where rapid, repeatable instrument positioning is required—supporting a smoother measurement process and clearer decision‑making in acceptance testing. For reliable, workshop‑ready magnetic measuring rigs, select the Metav IndustryLine heavy‑duty magnetic stand rod M208.109.4S via Metav Werkzeuge and contact our consultants in Emmerich for tailored application guidance. Technical Data Article number: M208.109.4S GTIN: 4054469167329 Tariff code: 90319000 Category: Magnetic stands Facts Length: 375 mm Thread: M10 Weight: 0.7 kg Special features Central mechanical force clamp Heavy‑duty execution Compatible with magnetic measuring stands FAQ Is the rod compatible with standard magnetic bases? The magnetic stand rod M208.109.4S is designed for use with magnetic measuring stands and standard M10‑threaded attachments, enabling straightforward integration with common magnetic bases. What are the length and mass of the rod? The rod has a length of 375 mm and a weight of 0.7 kg, offering a balance between reach and rigidity for bench and workshop use. How does the central clamp affect repeatability? The central mechanical force clamp on the M208.109.4S provides uniform clamping pressure at a single point, improving positional stability and repeatability during inspections. For which applications is this rod intended? This accessory is aimed at metrology stations and workshop inspection setups where firm, repeatable indicator or probe mounting on a magnetic stand is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Magnetic Base Stand Hydraulic, Flexible Universal, 100N Holding Force - Microtech Metrology
The combination of hydraulic clamping, a strong magnetic base and a compact footprint ensures stable, repeatable positioning for workshop and inspection tasks. Order the magnetic base stand directly via Metav Werkzeuge or consult our specialists for application guidance. Magnetic Base Stand – hydraulic, universal by Microtech Metrology A Magnetic Base Stand designed for flexible workshop and inspection use, offering hydraulic clamping and a compact, stable base for reliable measuring and fixturing. Hydraulic clamping mechanism Magnetic base force 100 Universal mounting system 8 Compact base 74 x 50 x 55 Stable support for repeatable measurements The hydraulic clamping system provides secure locking with minimal operator effort, reducing movement during critical checks and setup. Built around a magnetic base, the device delivers consistent holding force and quick repositioning on ferrous surfaces, which enhances repeatability in routine measurements. The robust base dimensions contribute to a low centre of gravity, so the stand remains steady during dial gauge checks or fixture alignment. This level of mechanical stability reduces rework and speeds up quality control tasks in production and inspection areas. Versatile mounting and compact reach for workshop use Equipped with a universal mounting system rated as 8 for the holder interface and a stem length of 400, the stand adapts to common dial indicators and probes used in machine shops. The compact base (74 x 50 x 55) makes the unit suitable for bench-top and on-machine use where space is limited, while still providing sufficient support for typical measuring loads. The design balances reach and stiffness, allowing secure attachment at various heights without compromising accuracy. This versatility makes the stand a practical choice for maintenance teams, toolmakers and quality technicians. Practical efficiency and lower operator influence Because the locking function is hydraulic rather than purely mechanical, the clamping process minimises over-tightening and operator-induced variation. The result is more consistent fixturing and fewer measurement errors attributed to user handling. For busy workshops, this translates into faster setup times and improved throughput: fixtures stay put, gauges remain aligned and inspection routines run with fewer interruptions. The unit is therefore an efficient accessory where short cycle times and consistent results matter. Built for everyday inspection with Microtech Metrology background Manufactured by Microtech Metrology, the stand combines straightforward operation with robust construction tailored to industrial environments. The hydraulic mechanism and magnetic base are engineered for long service intervals and straightforward maintenance, making the device a dependable component of a metrology toolkit. Spare parts and compatible holders are widely available, supporting continuity in production settings and reducing downtime for calibration or repairs. Contact Metav Werkzeuge in Emmerich to review application options for the Microtech Metrology hydraulic magnetic base stand and to confirm compatibility with existing gauges and fixtures Technical data Article number: 161110900 GTIN: 4061905456626 Brand: Microtech Metrology SKU: 161110900 Facts Magnet force: 100 Length: 400 Base dimensions: 74 x 50 x 55 Mounting/holder: 8 Special features Hydraulic clamping Universal and flexible application Compact footprint Suitable for bench and on-machine use FAQ What holding power does the magnetic base provide? The magnetic base stand (Microtech Metrology, SKU 161110900) is specified with a magnet force value of 100, delivering robust attachment for typical inspection and fixturing tasks. Is the clamping system manual or hydraulic? This magnetic base stand from Microtech Metrology features a hydraulic clamping mechanism that reduces operator-induced variation and simplifies locking. Which indicator or probe mounts are compatible? The stand uses a universal mounting interface marked as 8, enabling straightforward integration with standard dial indicators and test probes compatible with that holder size. What are the physical dimensions of the base and overall reach? The base measures 74 x 50 x 55 and the stem length is 400, offering a compact footprint with sufficient reach for most bench and on-machine inspection jobs. Is the product suitable for regular workshop use? Yes, the Microtech Metrology magnetic base stand (SKU 161110900) is designed for frequent workshop and inspection use, combining a compact base, hydraulic clamping and a universal mounting system for flexible deployment. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400x25 Magnetic Dial Stand Fine Adjustment 250x18 Base 50x120x55 - Microtech Metrology
Take advantage of a compact magnetic measuring stand with fine adjustment, a sturdy 400 x 25 mm column and a 50 x 120 x 55 mm base for repeatable indicator readings; order directly via Metav Werkzeuge or consult our specialists for application advice. Measuring stand (magnetic base) — fine adjustment, 130 holding force by Microtech Metrology Measuring stand for secure mounting of dial and test indicators on inspection tables, machine beds and bench fixtures, combining steady clamping with micro‑positioning. Fine adjustment for precise positioning Magnetic base with strong holding force 400 x 25 mm column for stable reach Compact base 50 x 120 x 55 mm Stable clamping for accurate indicator readings A robust magnetic base with fine adjustment turns routine checks into reproducible measurements. The integrated micro‑adjustment mechanism permits controlled, small movements that reduce overshoot when setting an indicator tip; this improves repeatability and shortens setup time. Thanks to the magnetic plate and its rated holding value, the unit provides steady anchorage on ferrous surfaces, making it suitable for inspection benches and machine tables where reliable contact is essential. The construction focuses on rigidity and predictable behaviour rather than unnecessary complexity, which supports consistent measurement chains in production and quality control. Built for workshop workflows and easy handling The vertical 400 x 25 mm column and a 250 x 18 mm cross arm deliver a practical working envelope while keeping the centre of gravity low. The compact 50 x 120 x 55 mm base minimises footprint without compromising stability, so the stand fits crowded benches and tight setups. The articulated cross arm allows quick repositioning of the indicator head and retains alignment after clamping; this reduces repositioning time during successive inspections. Materials and mechanical clearances are specified to resist everyday wear in machine shops, supporting a high duty cycle and low maintenance requirements. Practical benefits: faster inspections, fewer errors Integrating this magnetic fixture into daily checks reduces measurement variation and speeds up routine inspections. The combination of a fine adjustment stage and secure magnetic clamping increases confidence in readings and lowers the risk of false rejects. For labelling and traceability tasks, the compact design permits easy storage between uses and rapid redeployment at different stations. Where space and reproducibility matter, the stand contributes to a smoother workflow and helps maintain quality standards across serial checks and setup tasks. For technical consultation or to secure a supply of the Microtech Metrology measuring stand (SKU 161113410), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and delivery options Technical Data Article number: 161113410 GTIN: 4061905047497 Brand: Microtech Metrology Category: Magnetic stands Facts Magnetic force: 130 Base dimensions: 50 x 120 x 55 mm Cross arm: 250 x 18 mm Column: 400 x 25 mm Special features Fine adjustment for precise positioning Magnetic plate for secure clamping Suitable for dial and test indicators Compact footprint for bench and inspection use FAQ What surfaces are required for secure clamping? The measuring stand requires a ferrous, flat surface for the magnetic plate to engage properly; the magnetic base provides the holding characteristic listed under the technical facts. Can the stand be used with dial and test indicators? Yes, the Microtech Metrology measuring stand (SKU 161113410) is designed for dial and test indicators and includes a fine adjustment stage for micro‑positioning. How large is the working reach of the arm and column? The column is 400 x 25 mm and the cross arm is 250 x 18 mm, which together provide a practical reach for most workshop inspection tasks. Is the fine adjustment mechanism suitable for repetitive inspection work? The fine adjustment is intended to improve repeatability and reduce repositioning error during repetitive checks, supporting consistent inspection routines. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
420mm Ø20 Column With 390mm Ø16 Cross Arm Chrome Rod Mounting Arm - Metav IndustryLine
Take advantage of a chrome-plated rod assembly with a Ø20 × 420 mm main shaft and a Ø16 × 390 mm cross arm to increase mounting rigidity and measurement reach; the modular design is supplied without a magnet for flexible integration into existing inspection rigs. Order directly via Metav Werkzeuge or consult the Metav specialists for compatibility advice. M208.106.5 measuring stand rod assembly (Ø20×420 shaft, Ø16×390 cross arm) — Metav IndustryLine A M208.106.5 measuring stand rod assembly for precision indicator mounting and modular inspection setups, supplied without a magnet and optimised for stable, repeatable positioning. Chrome-plated rod for corrosion resistance Ø20 × 420 mm main shaft, M12 thread Ø16 × 390 mm cross arm for extended reach Supplied without magnet for modular use Stable anchoring that reduces measurement error The rod assembly is engineered to deliver mechanical stability where repeatable results matter. The Ø20 × 420 mm main shaft, with an M12 fixing, provides a stiff mounting column that resists twist under indicator load, while the Ø16 × 390 mm cross arm gives lateral reach without compromising support. This rigidity reduces vibration and play at the probe tip, translating into fewer re-measurements and a faster inspection loop. The chrome-plated finish also eases cleaning and resists workshop contaminants, so accuracy is maintained over time. Faster setups through a modular, toolroom-ready layout The arm geometry allows quick positioning of dial gauges and indicator holders across a useful working envelope. Supplied without a magnet, the assembly integrates with magnetic bases or dedicated clamps—this modular approach enables one configuration to serve multiple tasks, from bench top quality checks to on‑machine fixtures. The M12 thread at the shaft simplifies secure attachments and interchange of accessory parts, reducing setup times and improving throughput in repetitive tasks. Durable workmanship for everyday industrial use Finished in chrome plating, the component resists corrosion and wear encountered in daily workshop environments, supporting long service intervals and predictable performance. At approximately 1.9 kg, the assembly combines mass for steadiness with portability for flexible use across benches. As part of the Metav IndustryLine, the product benefits from a practical supply chain and quality control that aims to make precision equipment accessible to shops and maintenance departments without compromising specification or reliability. For tailored advice on system compatibility or to reserve the Metav IndustryLine M208.106.5 measuring stand rod assembly, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and prompt supply Technical data SKU: M208.106.5 GTIN: 4054469104669 Weight: 1.9 kg Material: chrome-plated rod Tariff code: 90319000 Core dimensions Main shaft: Ø20 × 420 mm, M12 thread Cross arm: Ø16 × 390 mm Cross arm length: 390 mm Features / Applications Supplied without magnet Designed for use with 208.106.4 bar Category: magnetic stands Suitable for dial gauges and indicator clamps FAQ Is the rod assembly compatible with magnetic bases? The M208.106.5 measuring stand rod assembly is supplied without a magnet and is designed for modular use; it can be mounted on compatible magnetic bases or paired with the 208.106.4 bar for secure positioning. What is the material and finish of the assembly? The M208.106.5 features a chrome-plated rod construction, providing corrosion resistance and easy cleaning for workshop environments. How does this assembly improve measurement stability? With a Ø20 × 420 mm main shaft and a Ø16 × 390 mm cross arm, the M208.106.5 offers increased rigidity and reduced play at the indicator, which helps lower measurement variation and rework. Can the assembly carry standard dial indicators and holders? Yes; the M208.106.5 accepts common indicator clamps and dial gauges, with an M12 fixing on the main shaft for secure attachment of accessories. Is the product delivered as a complete measuring stand? The delivery comprises the rod assembly only (M208.106.5) and does not include a magnet or base; it is intended for integration into existing measuring stand systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
430mm Magnetic Stand With Central Mechanical Clamp, Heavy Duty, M10 - Metav IndustryLine
Take advantage of the combination of stable holding, precise central clamping and fine adjustment for reproducible measurement set-ups; the heavy-duty magnetic base and 430 mm reach speed up inspection tasks and reduce re‑alignment time. Order the magnetic stand directly via Metav Werkzeuge or ask our consultants if clarification is required. M208.109.4 magnetic stand — heavy magnetic base with central mechanical clamp, 430 mm (Metav IndustryLine) M208.109.4 is a magnetic stand designed for secure positioning of dial indicators and measuring probes in workshop and inspection environments; the heavy version features a central mechanical force clamp and M10 thread for versatile fixturing. Heavy magnetic base with central clamp Fine adjustment for micro positioning Compatible with 8 mm stem dial indicators Robust M10 thread for diverse attachments Stable, repeatable holding for inspection tasks The combination of a heavy magnetic base and a central mechanical clamp provides a reliable foundation for measurement operations where repeatability matters. The central clamp locks the column and arm in a single action, eliminating multiple clamping steps and reducing setup time. With integrated fine adjustment, delicate repositioning is possible without disturbing the overall alignment, which is particularly valuable for comparative measurements and short series inspections. Built to deliver consistent contact pressure, the stand supports reproducible results across repeated cycles and shifts. Robust construction and workshop compatibility Constructed as a heavy version with an M10 mounting, the stand balances reach and rigidity: the overall height of 430 mm and the articulated arm dimensions (163 x 139 x 65) provide good access to larger workpieces while maintaining profile stiffness. The base geometry (61 x 50 x 55, M8) offers a compact footprint that centres mass near the magnetic surface for secure adhesion. At approximately 2 kg, the unit is portable enough for bench use yet substantial enough to resist vibration and incidental knocks. The magnetic force: 80 ensures firm attachment to ferrous surfaces, supporting steady measurement conditions in production and inspection areas. Compatibility, versatility and workshop benefits Designed to accept standard inspection tools, the stand accommodates dial gauges and test indicators with an 8 mm stem, enabling immediate use with common metrology instruments. The M10 connection opens the option to fit a range of holders or probe mounts, turning the stand into a flexible fixturing element for measuring, set‑up and run‑out checks. As a practical workshop solution, the unit reduces the need for repeated re‑clamping and streamlines typical measurement workflows, helping to save operator time and minimise the risk of measurement error. For tailored advice on integrating this Metav IndustryLine magnetic stand into existing inspection routines, contact Metav Werkzeuge for technical guidance and procurement assistance. Technical data Article number: M208.109.4 GTIN: 4054469104768 Manufacturer: Metav IndustryLine Facts Overall height: 430 Weight: 2 Magnetic force: 80 Arm dimensions: 163x139x65 Special features Central mechanical force clamp Heavy duty version M10 thread for attachments Fine adjustment included Base dimensions: 61x50x55, M8 Compatible with dial indicators (8 mm stem) FAQ How does the central mechanical clamp improve setup time? The central mechanical clamp locks column and arm in one motion, so the M208.109.4 achieves rapid, repeatable positioning without multiple fastenings, reducing total setup time for inspection tasks. Can this stand hold a standard dial indicator? Yes, the magnetic stand accepts dial indicators and test indicators with an 8 mm stem, making it compatible with common metrology instruments used on shop floors. What does the heavy version mean for stability? The heavy version provides increased mass and a stronger magnetic base, improving resistance to vibration and accidental movement during measurement procedures. Is the M10 thread suitable for custom fixturing? The M10 thread on the stand enables attachment of a variety of holders and probes, allowing integration with bespoke fixtures or probe adaptors. What surfaces are recommended for the magnetic base? The base is designed for ferrous, flat surfaces where the magnetic force of 80 can achieve secure adherence and stable measurement conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Permanent Magnetic Base M8 Thread, 12 kg Pull Force, Round 10.5 mm Height - Metav IndustryLine
Take advantage of a compact, high‑holding anchoring solution that combines a 12 kg magnetic holding force with an M8 threaded connection for straightforward integration into measuring rigs; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Permanent magnetic base M208.124 – round magnetic base with M8 thread and 12 kg holding force (Metav IndustryLine) Permanent magnetic base M208.124 for secure attachment of measuring posts and indicators on flat iron and steel surfaces Compact round base Ø50 mm 12 kg magnetic holding force M8 threaded connection Consistent anchoring for repeatable measurements The Ø50 mm round base delivers a stable contact area that reduces tilting and micro‑movement during inspection tasks. With a 12 kg holding force, the unit secures posts and small instruments on ferrous surfaces, improving measurement repeatability and reducing setup time on the shop floor. The compact footprint supports close‑quarter positioning on fixtures and workpieces while maintaining the necessary clamping power for precision measuring applications. Simple integration with standard stands and posts A standard M8 thread provides universal compatibility with most dial‑indicator stems and support rods, enabling quick mounting without adaptors. The low profile (height 10.5 mm) and light weight (0.2 kg) minimise leverage and user fatigue during repeated adjustments. This design feature ensures efficient workflow: fewer tool changes, faster alignment and a neat, compact measuring station that fits into existing inspection setups. Built for everyday workshop use and accurate fixturing The round magnet base is intended for attachment to flat iron and steel surfaces commonly found in machine shops and assembly areas. Its robustness supports routine metrology tasks such as holding dial indicators, test indicators or small measuring posts. The construction balances durability with portability, allowing easy repositioning while retaining secure fixturing for dimensional checks and setup procedures. Trusted supply and practical advantages Sourced under the Metav IndustryLine portfolio, the component benefits from Metav’s quality assurance and European distribution network. The combination of standard thread connection, proven magnetic performance and compact dimensions makes it a cost‑effective choice for workshops seeking reliable fixturing without over‑engineering. This practical solution helps reduce setup variability and supports a smoother production flow. Choose the Metav IndustryLine permanent magnetic base for reliable, space‑saving fixturing and contact Metav Werkzeuge for purchasing or technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M208.124 GTIN: 4054469151588 Weight: 0.2 kg Holding force: 12 kg Thread: M8 Foot Ø x H: 50 x 10.5 mm Shape: round Suitable for: measuring posts on flat iron and steel surfaces Tariff number: 90319000 Facts Diameter: 50 mm Height: 10.5 mm Mass: 0.2 kg Magnetic force: 12 kg Thread size: M8 Special features Round design for compact placement Compatible with standard indicator stems Lightweight for easy repositioning FAQ How strong is the magnetic holding force? The permanent magnetic base M208.124 provides a holding force of 12 kg, suitable for securing measuring posts and small indicators on ferrous surfaces. Which thread size is provided for mounting? An M8 threaded connection is fitted to the magnetic base, offering direct compatibility with common dial‑indicator stems and support rods. On which surfaces can the base be used? The unit is designed for attachment to flat iron and steel surfaces; non‑ferrous surfaces require a ferrous backing for magnetic anchoring. What are the dimensions and mass of the base? The base measures Ø50 mm with a height of 10.5 mm and weighs 0.2 kg, providing a compact balance between holding power and portability. Is this magnetic base suitable for workshop and inspection use? Yes, the Metav IndustryLine permanent magnetic base M208.124 is intended for workshop fixturing and routine inspection tasks where secure, repeatable positioning of indicators is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Magnetic Base Stand With 420mm Ø20 Stem And 390mm Ø16 Crossarm Three-Point Prism Base With On/Off Switch - Metav IndustryLine
Take advantage of the combination of 80 kg holding force, a prismatic sole with on/off switch and precise fine adjustment to secure repeatable indicator readings and faster set‑up at the workbench; order the magnetic stand directly via Metav Werkzeuge or ask our consultants for tailored application advice. Magnetic measuring stand "Bosch" – 80 kg magnetic base, 500 mm height The Magnetic measuring stand "Bosch" is a workshop-grade magnetic base designed to hold dial indicators and small test instruments steadily for inspection and setup work in metalworking and quality control environments. 80 kg magnetic pull with on/off switch Fine adjustment for precise positioning Chrome-plated Ø20 mm column for stiffness Cross arm Ø16 x 390 mm for extended reach A secure foundation for repeatable measurements The combination of a magnetic base with a prismatic sole and an integrated on/off switch provides a reliable anchoring system on ferrous surfaces that reduces slippage during probing and gauging. The high 80 kg holding force is specifically beneficial when working on vertical or irregular surfaces, ensuring stable contact so that readings can be taken without re‑clamping. The practical result is fewer measurement errors and less time spent re‑aligning test equipment, which directly increases throughput in routine inspection tasks. Micro‑adjustment and reach for accurate alignment A mechanical fine adjustment mechanism permits controlled, sub‑millimetre movements of the probe or indicator, enabling precise coaxing into position without disturbing the setup. The chrome‑plated Ø20 x 420 mm column delivers stiffness and resistance to torsion, while the Ø16 x 390 mm cross arm extends reach for awkward or recessed measurement points. Together these features allow accurate orientation of gauges with minimal operator effort, turning a potentially fiddly process into a fast, reproducible step in the measurement workflow. Built for everyday workshop use and compatibility With an overall height of 500 mm and a compact base footprint, this magnetic support balances reach and stability for bench and shop‑floor use; the unit weighs 4.2 kg, which aids portability while preserving robustness. The stanchion and arm are chrome‑plated to resist corrosion and to maintain surface finish where clamping parts and accessories interface. The design suits common dial indicators and test probes used in machine shops and inspection departments, offering a practical, long‑lasting accessory that simplifies set‑ups and sustains measurement quality over repeated cycles. Contact Metav Werkzeuge today to request tailored advice on this Bosch magnetic measuring stand with 80 kg holding force and fine adjustment — Metav Werkzeuge in Emmerich can support specification checks and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M208.106.4 GTIN: 4054469104652 eClass: 21170601 Manufacturer: Metav IndustryLine Facts Magnetic force: 80 kg Overall height: 500 mm Column: Ø20 x 420 mm, M12 Cross arm: Ø16 x 390 mm Weight: 4.2 kg Base dimensions: 75 x 60 x 80 mm Special features Magnet with prismatic sole and on/off switch Fine adjustment for precision alignment Chrome-plated rod and arm M12 thread for accessory mounting Suitable for dial indicators and small test instruments FAQ How strong is the magnetic holding force and what does it mean in use? The magnetic base provides an 80 kg holding force; this ensures secure attachment to ferrous surfaces and reduces the risk of movement during indicator readings. Can the stand be adjusted finely for delicate alignment? Yes, the stand includes a mechanical fine adjustment that allows controlled positional changes for exact indicator alignment. What are the main dimensions to consider when planning a setup? Key dimensions are overall height 500 mm, column Ø20 x 420 mm, and cross arm Ø16 x 390 mm, which determine reach and clearance for most bench and shop applications. Is the unit suitable for portable use between workstations? Weighing 4.2 kg and featuring a compact base, the stand is portable enough for routine repositioning while remaining stable during measurements. Which measurement instruments are compatible with this magnetic stand? The stand is compatible with standard dial indicators and small test probes commonly used in inspection and setup work; the M12 thread and cross arm permit straightforward mounting of typical holders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Reliable positioning for precise measurement at the machine
Magnetic base stands, also known as magnetic stands or magnetic mounting stands, provide stable, repeatable fixation for dial indicators, test indicators and small workpieces directly at the machine. The product group includes everything from heavy-duty units to compact mini versions, all designed to keep measurement devices exactly where they are needed during inspection and setup.
How magnetic base stands work and where they belong
The core of a magnetic base stand is a magnetic block base with a prism-shaped sole on some models for secure mounting on shafts. A multi-jointed adjustable arm with various end fittings carries the measuring instrument and allows fine positioning. Models differ by clamping concept — central mechanical clamping or individual joint adjustment — and by actuation, for example a switchable magnetic base operated via a rotary switch. Typical holding forces are 60 kg or 80 kg for standard bases; mini magnetic stands deliver significantly lower retention suitable for lighter gauges.
Practical benefits that improve workshop efficiency
- Significantly reduced setup time through rapid magnetic fixation and flexible arm positioning.
- Improved measurement stability thanks to high holding force and prism options for shaft mounting.
- Versatile use across inspection, alignment and on-machine measurement tasks with dial indicators and feeler gauges.
- Choice of specialised designs such as hydraulic magnetic stands, vacuum stands and models with fine adjustment for sensitive tasks.
- Compact mini stands for confined spaces where a full-size base would be impractical.
Why Metav is the sensible partner for magnetic base stands
As a precision partner, Metav combines practical range and market trust to make accurate measurement accessible to every workshop. With over 48,000 customers, a selection of more than 250,000 products and a logistics and quality hub in Emmerich that acts as a filter for the European market, Metav ensures reliable supply and knowledgeable product choice. The Metav range focuses on proven workshop solutions such as magnetic clamping prisms and flexible arm stands, supported by product selection guidance for industrial buyers.
In short
Magnetic base stands offer secure, adaptable positioning for on-machine measurement and inspection, reducing setup time and increasing repeatability. Choose between heavy-duty, fine-adjustment and mini options depending on the application.
FAQ
What tasks are magnetic base stands best suited for?
Magnetic base stands are ideal for on-machine measurement, alignment and inspection tasks where a dial indicator or test indicator must be held firmly and positioned precisely.
How strong are the magnets in standard stands?
Standard magnetic base stands commonly provide a holding force of 60 kg or 80 kg, while mini magnetic stands have a lower retention force suited to lighter measuring instruments.
Can magnetic base stands be mounted on shafts?
Yes. Models with a prism-shaped sole and a switchable magnetic base are specifically designed to mount on shafts and cylindrical surfaces, enabling stable positioning for rotational checks.
Which type of adjustment should I choose for fine measurement work?
For sensitive or precision inspection, select a stand with fine adjustment or a model with individual joint clamping; these allow subtle corrections without disturbing the instrument position.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com