Reliable magnetic stands for precise positioning
Magnetic stands provide a stable base for holding measuring instruments and workpieces, delivering repeatable positioning and enabling accurate inspection and setup operations. These systems are used to secure dial indicators, feeler-lever gauges and other measuring devices to machine beds or fixtures, offering flexibility through adjustable arms and swivel joints for exact alignment. Available variants include switchable magnetic base, flexible arm stand and mini magnetic stand, each designed to support different holding forces and practical applications in metalworking. Robust magnetic blocks and prism feet allow mounting on shafts and large parts, ensuring reliable clamping during measurement and setup.
50mm Magnetic Base With M8 Threaded Bushing, 24 kg Pull, 10mm Height - Metav IndustryLine
Benefit from a compact, powerful mounting solution that combines a 24 kg holding force with a 50 mm round base and an M8 threaded socket for reliable indicator support; order directly via Metav Werkzeuge or consult our experts for application advice. Permanent magnetic base M208.127 – 50 mm round, 24 kg holding force (Metav IndustryLine) The Permanent magnetic base M208.127 provides a robust mounting point for dial indicators and measuring posts on flat ferrous surfaces in workshop and inspection environments. *Strong 24 kg holding force *Compact 50 mm round base *M8 threaded socket for standard posts *Low-profile 10 mm height Stable holding for precise measurement setups The permanent magnetic base offers a 24 kg magnetic holding power from a compact footprint, giving a stable anchor for measuring instruments and small fixtures. The combination of a 50 mm diameter plate and low mass ensures a predictable contact area on flat ferrous surfaces, reducing micro-movements during readings. With an integrated M8 thread, the base accepts standard indicator stems and accessory posts, enabling straightforward mechanical coupling without additional adapters. This reliability shortens setup time and improves the repeatability of inspection tasks. Space-saving design that frees workshop capacity Engineered for constrained environments, the round base measures 50 mm across with a slim 10 mm profile, allowing the support of indicators or small stands where larger bases would obstruct access. At approximately 0.2 kg it is easy to reposition while remaining sufficiently heavy to resist tipping when attached. The compact form factor benefits bench work and machine‑side checks alike, making it simple to integrate into existing rigs or transient measuring stations without extensive reconfiguration. Ready compatibility with common measuring posts and stands A threaded socket sized M8 x 8 mm provides a standard interface for indicator stems and many small stands, ensuring compatibility with a wide range of accessories. The base is intended for use on flat iron and steel surfaces, making it especially suitable for datum plates, machine beds and jig faces. The overall length of the threaded socket (24 mm) gives a secure engagement for posts while preserving alignment. This straightforward mechanical interface supports fast, repeatable mounting and demounting of gauges during serial inspections. Durable geometry for routine shop use The round base geometry minimises edge‑induced tilting and offers a predictable contact circumference that simplifies placement. Its modest dimensions and robust thread mean fewer components are required to assemble a measuring stand, which reduces inventory complexity and keeps the measuring point both accessible and protected. The product is therefore a practical choice where steady magnetic anchoring is needed without sacrificing portability or workspace economy. For tailored advice on integrating the Metav IndustryLine permanent magnetic base M208.127 into inspection rigs or measuring stands, contact Metav Werkzeuge for application support and fast supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M208.127 GTIN: 4054469151663 Customs tariff number: 90319000 Facts Magnetic holding force: 24 kg Base diameter: 50 mm Base height: 10 mm Weight: 0.2 kg Thread: M8 Thread depth / socket length: 8 mm Overall thread length: 24 mm Special features Round base design M8 threaded socket for indicator posts Suitable for measuring posts on flat iron and steel surfaces Category: Magnetic stands FAQ What holding capacity does the magnetic base provide? The magnetic base delivers a holding force of 24 kg, which provides a stable anchor for light to medium indicator setups and small fixtures. Which thread is fitted to the base and what does it accept? The unit features an M8 threaded socket (M8 x 8 mm) sized for standard indicator stems and many measuring posts; the thread length supports secure engagement. On which surfaces will the base perform best? It is designed for use on flat iron and steel surfaces, such as machine beds, datum plates and jig faces, where full contact ensures maximum magnetic adhesion. Is the base suitable for tight or restricted access areas? Yes. The 50 mm diameter and 10 mm low profile make it well suited to confined setups where larger bases would interfere with tooling or access. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60kg Magnetic Base M10 With On/Off Switch And Prism Foot - Metav IndustryLine
Take advantage of a compact, high‑holding solution with a 60 kg nominal holding force, an M10 threaded connection and a practical on/off switch for fast clamping and release; order the magnetic base directly via Metav Werkzeuge or ask our consultants for tailored advice. Magnetic base 60 kg M10 (M208.101) by Metav IndustryLine — 60 kg holding force, M10 thread The Magnetic base 60 kg M10 (M208.101) is a compact magnetic mounting with an integrated on/off switch and a prism foot, designed for secure attachment to flat and round machine surfaces and for use with indicator stands in metrology and workshop inspection. 60 kg nominal holding force M10 threaded connection On/off switch for quick release Prism foot for round surfaces Secure mounting for precise measurement and inspection A rated holding force of 60 kg provides a robust foundation for measurement setups, reducing the risk of movement during delicate inspections. The integrated on/off switch changes the magnetic circuit state quickly, enabling safe positioning before activation and fast release afterwards. This combination minimises downtime during repetitive checks and supports consistent measurement routines. The prism foot improves contact on cylindrical or curved workpieces, so readings remain repeatable even when the base is used on shafts or round housings. Compact design that fits standard indicator posts and stands With a threaded M10 connection the base accepts a wide range of indicator posts and extension rods commonly found in metrology kits and magnetic stands. The small footprint and the stated dimensions (59 x 50 x 55 mm) keep the assembly compact and easy to position in confined spaces without compromising stability. The relatively low weight supports quick relocation across the shop floor and simplifies use with portable dial indicators or digital probes, enhancing workflow flexibility in inspection, maintenance and setup tasks. Practical benefits for workshop workflows and reliability Engineered for everyday metrology and quality control, the magnetic base speeds up fixture changes and setup of dial indicators, test indicators and small cameras. The switching mechanism reduces the need for manual clamping force and lowers the chance of inadvertent movement when fixing the base. As a result, measurement cycles become more efficient and less error‑prone, which supports quality assurance targets and shorter inspection lead times. The durable construction and straightforward connection standard mean long service life and compatibility with existing stands. For secure, repeatable inspection setups choose the Metav IndustryLine magnetic base M208.101 — contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich. Technical data Article number: M208.101 GTIN: 4054469104508 ECLASS: 21170601 Tariff number: 90319000 Category: Magnetic stands Facts Holding force: 60 kg Thread: M10 Weight: 1 kg Dimensions: 59 x 50 x 55 mm Special features On/off switch Prism foot for round surfaces Compatible with standard indicator posts Suitable for metrology and workshop inspection FAQ What holding force does the magnetic base provide? The magnetic base provides a nominal holding force of 60 kg, ensuring stable attachment for indicator stands and inspection fixtures. Is the connection compatible with common indicator posts? Yes, the unit features an M10 thread that matches widely used indicator posts and extension rods for measurement setups. Can the base be used on cylindrical surfaces? The prism foot is designed specifically to improve contact on round or cylindrical components, making it suitable for shafts and housings. How does the on/off switch improve handling? The integrated switch enables safe positioning before magnetisation and rapid release afterwards, reducing the risk of incidental movement during setup. What are the physical dimensions and weight? Dimensions are 59 x 50 x 55 mm and the weight is 1 kg, which keeps the base compact and easy to relocate in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60kg Magnetic Base M8 With On/Off Switch And Prism Foot - Metav IndustryLine
Take advantage of the combination of firm magnetic anchoring and compact handling for reliable inspection set-ups; the 60 kg nominal holding force and M8 threaded stud ensure fast, reproducible fixturing for measurement tasks. Order the magnetic base directly via Metav Werkzeuge or ask our consultants if needed. Magnetic Base 60 kg M8 — switchable magnetic mount with prism foot (Metav IndustryLine) The Magnetic Base 60 kg M8 is a compact, switchable holding device for securing indicators and fixtures during inspection and workshop measurement tasks. 60 kg nominal holding force M8 threaded stud for universal mounts Integrated on/off switch and prism foot Stable anchoring for precision inspection A firm magnetic anchor is essential for repeatable measurement. The 60 kg nominal holding force provides a dependable contact to ferrous surfaces, reducing micro‑movement during readings and improving traceability of results. Fitted with an M8 threaded stud, this magnetic mount integrates with common indicator stems and articulated holders used across metrology benches, enabling quick set‑ups and minimising non‑productive time. The result is a measurable increase in workflow efficiency where consistent fixturing matters. Easy operation and versatile contact geometry The integrated on/off switch simplifies positioning: the base can be released for adjustment and re‑engaged without sliding the device across the workpiece, which protects delicate surfaces. The prism foot gives a secure seating on cylindrical parts, preventing lateral slip when measuring shafts or round housings. Compact dimensions of 59 x 50 x 55 mm and a mass of 0.95 kg make handling straightforward, while the design supports rapid repositioning in tight inspection cells. Workshop compatibility and practical benefits Designed for routine shop and inspection use, the magnetic mount connects directly to standard stands and holders via the M8 interface, supporting a broad range of indicator types and fixtures. Its compact footprint preserves access to the component and makes it suitable for fixtures with limited clearance. By reducing set‑up time and improving fixturing stability, the device contributes to lower rework rates and smoother production control in maintenance, quality assurance and assembly operations. Choose the Metav IndustryLine magnetic base for dependable anchoring in your metrology workflow and contact Metav Werkzeuge for ordering or technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M208.100 GTIN: 4054469104492 Tariff number: 90319000 Facts Holding force: 60 kg Thread: M8 Dimensions: 59 x 50 x 55 mm Weight: 0.95 kg Special features Integrated on/off switch Prism foot for cylindrical parts Suitable for magnetic stands and indicator mounting Category: Magnetstative FAQ How strong is the magnetic holding force and what does it mean in practice? The magnetic base provides a 60 kg nominal holding force; in practice this ensures stable fixture contact on ferrous surfaces for consistent measurement and reduced deflection during indicator readings. Can the base be used on round shafts and how is it prevented from slipping? Yes. The prism foot is designed to seat cylindrical parts securely, so the magnetic base holds round components without lateral movement when the magnet is engaged. Which mounting thread is fitted and which accessories will attach? The unit is fitted with an M8 threaded stud, compatible with standard indicator stems, articulated holders and many universal mounts used in metrology benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
630x32 Magnetic Indicator Stand with 50x120x55 Base, 500x25 Cross Arm, Fine Adjustment - Microtech Metrology
Take advantage of a compact, highly stable workshop stand that combines a 130 N magnetic holding force with precise micrometric fine adjustment for repeatable set-ups. Order this magnetic stand directly via Metav Werkzeuge or consult Metav's specialists for specification advice and rapid supply. Magnetic Stand — Microtech Metrology magnetic inspection stand with 130 N holding force and fine adjustment The Magnetic Stand offers a stable, adjustable platform for indicator and small-probe mounting in workshop and inspection environments, designed for reliable, reproducible measuring tasks across production and quality-control stations. Fine micrometric adjustment 130 N magnetic holding force Base 50 × 120 × 55 mm for stable support Cross arm 500 × 25 mm, column 630 × 32 mm Stability that secures precise measurements A robust foundation is essential for repeatable readings. The combination of a compact base (50 × 120 × 55 mm) and a 130 N magnetic holding force provides the mechanical stability required to minimise vibration and displacement during measurement. This physical steadiness reduces rework and measurement scatter, helping to uphold process capability and traceability in routine inspection tasks. The construction is particularly suited to bench-mounted indicator setups where a rigid support directly translates into more reliable measurement results. Micrometric control for fast, accurate alignment Built-in fine adjustment enables precise positioning of gauges and probes without repeated coarse realignment. The micrometric control allows for sub-millimetre corrections and smooth, reproducible movement, shortening set-up time and reducing operator influence on the measurement result. For tasks that require careful alignment—such as comparing run-out or checking small tolerances—the fine adjustment is a practical efficiency gain that improves throughput while maintaining metrological confidence. Practical reach and workshop compatibility A long cross arm (500 × 25 mm) and a sturdy column (630 × 32 mm) extend the working range while keeping the assembly compact enough for a typical inspection bench. The overall geometry supports a wide variety of indicator positions and measurement orientations, making the stand adaptable across inspection, maintenance and small-series production contexts. The design emphasises straightforward handling and secure clamping, ensuring quick repeat tasks without sacrificing positional accuracy. Microtech Metrology engineering ensures component fit and function for durable everyday use. For tailored measurement solutions and reliable supply of the Microtech Metrology Magnetic Stand with 130 N holding force, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for specification support and prompt delivery. Technical Data Article number: 161113610 GTIN: 4061905047503 Manufacturer: Microtech Metrology eClass: 21170601 Facts Magnetic holding force: 130 N Base (foot): 50 × 120 × 55 mm Cross arm: 500 × 25 mm Column: 630 × 32 mm Fine adjustment: yes Special features Category: Magnetic stands Fine adjustment mechanism Compact magnetic base for bench mounting Suitable for indicator and probe mounting FAQ What holding force does the stand provide? The magnetic base delivers a holding force of 130 N as specified for the Microtech Metrology magnetic stand (SKU 161113610). Does the stand include fine adjustment for alignment? Yes — the product features a micrometric fine adjustment mechanism for precise, repeatable positioning. What are the main dimensions of the base and arm? Base dimensions are 50 × 120 × 55 mm; the cross arm is 500 × 25 mm and the column measures 630 × 32 mm. Is this stand suitable for routine workshop inspection tasks? The combination of a compact, rigid base and extended arm makes the stand well suited to routine inspection and small-series measurement set-ups. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
66 mm Magnetic Base With M8 Thread Round 15 kg Holding Force - Metav IndustryLine
Compact, low‑profile design combined with a reliable 15 kg magnetic holding force and standard M8 thread ensures stable mounting for measuring posts and dial gauges; Order the Permanent magnet base with M8, 15 kg holding force, Ø66 × H10.5 mm directly via Metav Werkzeuge or ask our consultants if needed. Permanent magnet base with M8 thread — 15 kg holding force (Metav IndustryLine) The Permanent magnet base with M8 thread provides a compact magnetic mounting solution for measuring stands and posts on flat iron and steel surfaces, ideal for workshops and inspection benches where quick, repeatable fixation is required. M8 threaded connection for standard posts 15 kg magnetic holding force for stable fixation Compact Ø66 × 10.5 mm base for confined spaces Suitable for measuring rods on flat iron and steel Reliable holding power for precise set-ups The compact magnetic base delivers a measurable 15 kg holding force, giving dependable resistance to lateral and vertical loads during measurement tasks. The integrated M8 thread accepts common posts and adapters used on dial gauge stands and measuring posts, which reduces the need for additional hardware. With a low profile and clearly defined dimensions, the base enables reproducible clamping positions on flat ferrous surfaces, shortening set‑up times and supporting consistent inspection workflows. Space‑saving design that speeds workflow A small footprint and low height keep the centre of gravity close to the mounting surface, improving stability when used in restricted areas or crowded benches. The Ø66 mm base and 10.5 mm height make the component suitable for tight assemblies where a larger base would obstruct access. Weighing approximately 0.3 kg, the unit is easy to reposition by hand, which supports fast changeovers between measurement points without compromising on hold‑down performance. Practical compatibility for workshop metrology As a member of the magnet‑stand family, this base is built to interface with standard measuring posts and stands, enabling secure fixation of gauges and sensors on flat iron and steel surfaces. The round base geometry promotes uniform contact and repeatable placement. For routine inspection, calibration set‑ups or temporary fixturing on ferrous assemblies, the component offers a straightforward, robust option that integrates with existing workshop tooling and reduces mechanical set‑up variability. Contact Metav Werkzeuge today to confirm compatibility with existing posts and to order the M8 permanent magnet base directly — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M208.125 Description: Permanent magnet base with M8, magnetic force 15 kg, Ø66 mm, H 10.5 mm GTIN: 4054469151595 SKU: M208.125 Facts Holding force: 15 kg Diameter: 66 mm Height: 10.5 mm Weight: 0.3 kg Thread: M8 Customs tariff number: 90319000 Special features Round base design Suitable for measuring rods on flat iron and steel surfaces Compatible with measuring stands and posts Compact footprint for confined workspaces FAQ How strong is the magnetic hold? The permanent magnet base provides a holding force of 15 kg on flat iron and steel surfaces, allowing stable fixation for measuring posts and dial gauges. Which thread is provided for mounting? The base features an M8 thread for attachment to standard posts and adapters commonly used with measuring stands. Is this base suitable for dial gauge stands and measuring rods? Yes — the design is intended to secure measuring rods and dial gauge assemblies on flat ferrous surfaces for repeatable measurement set‑ups. Can it be used on non‑ferrous or curved surfaces? The magnetic base is designed for flat iron and steel surfaces; performance is reduced on non‑ferrous or highly curved materials and is not recommended for reliable fixation on those substrates. What are the overall dimensions and weight? Diameter 66 mm, height 10.5 mm, weight approximately 0.3 kg; intended for compact, low‑profile mounting situations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70 x 46 x 65 mm Magnetic Base 60 kg With On/Off Switch And Prism Foot, M10 - Metav IndustryLine
Take advantage of a compact magnetic base that combines 60 kg holding force with a practical on/off switch and a standard M10 threaded stud for fast, repeatable mounting; order directly via Metav Werkzeuge or consult Metav's advisors for specification matching. Magnet M208.106.3 — Magnetic base with 60 kg holding force and M10 thread (Bosch style) A Magnet M208.106.3 magnetic base designed for secure positioning of dial indicators and gauge stands in workshop inspection and measurement tasks 60 kg holding force, reliable clamp On/off switch with prism base Standard M10 threaded stud for mounting Compact and portable at 1.3 kg Fast, secure holding for measurement set-ups The compact magnetic base delivers a 60 kg holding force, allowing rapid fixturing of dial indicators and inspection fixtures without elaborate clamps. The integrated on/off switch disengages the magnet cleanly, speeding up repositioning while preserving the magnetic surface from accidental magnetisation of delicate components. This combination reduces setup time and improves repeatability in routine measuring tasks by providing a stable reference that minimises movement during readings. Standard mounting and compatibility for workshop rigs Equipped with a M10 thread, the magnetic base fits common indicator holders and extension studs used across inspection benches and bench stands. The prism base aids alignment on round or irregular surfaces, so measuring tools rest more securely on shafts and cylindrical parts. At around 1.3 kg, the unit is both sturdy and portable, suitable for bench, machine‑side or mobile inspection carts where a balance of mass and manoeuvrability is required. Practical design for inspection and everyday metrology The device is intended as a purpose-built magnetic mounting aid for metrology work rather than a load-bearing clamp for lifting. The magnetic base is particularly useful for repetitive alignment, comparative checks and temporary fixtures during setup and test runs. Its compact footprint and switchable magnet allow quick changes between jobs, supporting efficient workflows in quality control, maintenance and assembly areas while ensuring consistent positioning for accurate measurements. Choose the Metav IndustryLine magnetic base M208.106.3 for dependable, quick set‑up in inspection applications — contact Metav Werkzeuge for product advice or ordering at info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: M208.106.3 GTIN: 4054469104645 eCl@ss: 21170601 Customs tariff number: 90319000 Brand label: "Bosch" style Facts Holding force: 60 kg Weight: 1.3 kg Thread: M10 SKU: M208.106.3 Special features On/off switch Prism base for cylindrical surfaces Intended for magnetic stands and gauge mounting Compact, portable design FAQ What holding capacity does the magnetic base provide? The Magnet M208.106.3 offers a holding force of 60 kg, suitable for securing dial indicators and small fixtures during inspection. Is the base suitable for cylindrical parts and shafts? Yes, the prism base of the Magnet M208.106.3 improves contact on round surfaces, aiding alignment on shafts and similar components. Which mounting thread is provided for attachment to indicator holders? The unit is supplied with an M10 threaded stud, compatible with standard indicator holders and extension studs. How heavy is the magnetic base for transport and bench work? The Magnet M208.106.3 weighs approximately 1.3 kg, balancing stability with portability for workshop use. Can the magnet be switched off for safe repositioning? The magnetic base includes an on/off switch to disengage the magnet, allowing safe and convenient repositioning without damaging sensitive parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75 x 46 x 54 mm Magnetic Base With 54mm Lamellae, 60kg Holding Force, M8 Thread, On/Off Switch - Metav IndustryLine
Take advantage of strong 60 kg magnetic holding, lamellae that conform to uneven contact faces and a compact adjustable height for fast, reliable set-ups; order the magnetic base directly via Metav Werkzeuge or consult our advisors if required. Magnetic Base with Lamellae for Uneven Surfaces M208.110 — 60 kg holding force, M8 thread (Metav IndustryLine) The Magnetic Base with Lamellae for Uneven Surfaces M208.110 is a compact magnetic stand designed for attaching measuring instruments to irregular components in workshops and inspection benches. 60 kg holding force with on/off switch Lamellae 54 mm for uneven surfaces Adjustable height up to 15 mm M8 threaded connection for measuring stands Secure holding that speeds up inspection cycles A high 60 kg magnetic force provides firm clamping on ferrous parts, reducing the need for repeated repositioning during measurement tasks. The robust magnetic action shortens set-up time in quality control and fixture tasks, which increases throughput on the shop floor. Built for repeatable performance, the unit’s on/off switch allows safe handling when mounting or removing indicators, lowering the risk of accidental displacement and protecting sensitive probes. Conforms to irregular geometries for dependable contact The integrated lamellae (54 mm) are engineered to redistribute contact pressure across uneven surfaces, enabling stable seating on pitted, curved or oxidised workpieces where flat bases fail. This adaptive contact preserves alignment of measuring tips and supports accurate readings even on imperfect components. The combination of lamellae and adjustable height (up to 15 mm) makes the holder versatile for small positional corrections without changing stands or fixtures. Compact design for flexible workshop integration Weighing 0.7 kg, the magnetic foot is compact yet sturdy, suited to bench-top use and mobile inspection tasks. The M8 threaded interface ensures compatibility with standard measuring stands and dial indicators, simplifying integration into existing metrology setups. The compact format helps maintain accessibility around fixtures while delivering the stability expected in machining and assembly environments, making it a practical choice for workshop and inspection roles. Reliability backed by a precision partner Delivered under the Metav IndustryLine banner, this magnetic base reflects a pragmatic approach to precision: durable mechanics, straightforward operation and compatibility with common metrology gear. Use in routine measurement, fixture support or temporary clamping benefits from a design that prioritises secure contact and operator control. Metav’s distribution presence in Emmerich acts as a quality filter for the European market, ensuring dependable supply and product consistency. Contact Metav Werkzeuge for tailored advice on integrating the M208.110 magnetic base into inspection and fixture workflows Technical data Article number: M208.110 GTIN: 4054469159423 Manufacturer brand: Metav IndustryLine Facts Holding force: 60 kg Thread: M8 Weight: 0.7 kg Tariff number: 90319000 eClass: 21170601 Special features Lamellae 54 mm for uneven contact faces Maximum adjustable height 15 mm On/off magnetic switch for safe operation Suited for magnet stands and measuring probes FAQ What holding force does this magnetic base provide? The M208.110 offers a holding force of 60 kg, sufficient for securing dial indicators and small measuring fixtures during inspection tasks. Is the base suitable for curved or damaged surfaces? Yes, the lamellae design (54 mm) on the magnetic base adapts to uneven or curved surfaces to maintain stable contact and consistent measurements. Which stands and indicators are compatible with the thread? The unit features an M8 threaded connection, compatible with common measuring stands and indicator holders used in workshops. How is the magnetic action controlled during setup? Operation is manual via an integrated on/off switch that allows safe mounting and removal without compromising the position of attached instruments. Can this magnetic base be used for portable inspection tasks? Its compact form and weight of 0.7 kg make the magnetic foot practical for bench-top and mobile inspection duties where reliable temporary clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8 mm Centre Gauge For Dial Indicator Mounting - Metav IndustryLine
Take advantage of the precise compatibility and compact handling offered by this accessory: the combination of a standard 8 mm stem mount and a lightweight design ensures fast, repeatable centring for inspection tasks, while minimising setup time and operator fatigue. Order the accessory directly via Metav Werkzeuge or contact our consultants for application guidance. Centre Bracket for Dial Indicator 8 mm — 8 mm stem mount, Metav IndustryLine accessory The Centre Bracket for Dial Indicator 8 mm is a compact accessory engineered to accept an 8 mm stem and provide secure centring for dial indicator measurements in workshop and inspection environments. 8 mm stem mount for standard dial indicators Lightweight design, approx. 0.1 kg Secure centring for repeatable position fixing Secure, repeatable positioning for inspection tasks The mounting adapter accepts the 8 mm stem common to many dial gauges and secures the instrument for consistent readings. By providing a stable reference point, the bracket reduces setup variability and supports better repeatability in routine checks. The clear mechanical function—an interface between holding fixture and measuring instrument—helps streamline measurement routines in quality control and bench inspection, resulting in fewer re-measures and a more efficient inspection flow. Compact handling to speed up workshop processes Weighing approximately 0.1 kg, the accessory offers compact handling that simplifies repositioning and alignment on small fixtures or during serial checks. Its low mass lowers operator strain when frequently repositioning the indicator, which in turn shortens cycle times during multi-point inspections. The pragmatic design supports rapid mounting and removal, making the bracket an effective time-saver for repetitive measurement sequences without compromising stability. Practical integration into existing metrology setups Designed as an accessory for dial indicator mounts, the bracket integrates into conventional inspection benches and clamping systems, providing a dependable way to centre indicators for inside, outside or stepped measurements when used in conjunction with standard fixtures. The accessory is listed under accessories for measuring instruments and is supplied with a clear article identifier (SKU: M208.065) for quick procurement and inventory management. For applications requiring a consistent reference, this bracket is a straightforward addition to existing metrology toolsets. Contact Metav Werkzeuge to specify the Centre Bracket for Dial Indicator 8 mm from Metav IndustryLine and ensure the right mounting solution for precise centring in production or inspection workflows Technical data Article number: M208.065 GTIN: 4054469104355 ECLASS: 21170308 HS code: 90179000 Manufacturer: Metav IndustryLine Facts Weight: 0.1 kg Stem diameter: 8 mm Special features Suitable for dial indicator mounting Category: Accessories for measuring instruments Intended for the reception of a dial indicator SKU: M208.065 FAQ Is the bracket compatible with dial indicators that use an 8 mm stem? Yes. The Centre Bracket for Dial Indicator 8 mm is designed specifically to accept an 8 mm stem and secure standard dial indicators for inspection tasks. What is the weight and handling benefit of the accessory? The bracket weighs approximately 0.1 kg, offering compact handling that simplifies repositioning and reduces operator fatigue during repetitive measurements. Can the accessory be integrated into existing inspection fixtures? Yes. The accessory is intended as an add-on for measuring setups and can be mounted within common clamping arrangements to provide a stable centring point for dial indicators. How can the product be ordered or further specified? Specify article M208.065 (Centre Bracket for Dial Indicator 8 mm) when ordering; Metav Werkzeuge can advise on compatibility with specific fixtures and inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80 kg Magnetic Base M10 With On/Off Switch And Prism Foot - Metav IndustryLine
Take advantage of the combination of robust 80 kg holding force, an M10 threaded connection and a user-friendly on/off magnetic control for reliable indicator mounting and swift set‑ups; order the magnetic base directly via Metav Werkzeuge or consult the specialists for tailored advice. Magnetic Base M208.103 — 80 kg holding force, M10 thread (Metav IndustryLine) The Magnetic Base M208.103 is a compact magnetic holding solution for indicator stands and measurement fixtures in machine shops and inspection benches. *80 kg nominal holding force *On/off magnetic control for fast set-up *M10 threaded connection for universal fittings *Prism foot for secure contact with round rods Secure mounting for precision measurement A nominal 80 kg holding force provides a clear, quantifiable basis for stable attachments on ferrous surfaces; this level of grip reduces micro‑movement in comparative and inspection work, improving measurement reproducibility. The magnetic mechanism with an integrated on/off switch enables swift engagement and release without tools, which shortens fixture time and minimises handling errors. The M10 threaded interface matches common indicator stems and attachment posts, ensuring compatibility with standard metrology equipment and simplifying integration into existing setups. The compact form offers a balance of mass and portability while delivering steady support for dial and electronic indicators. Effortless operation with versatile contact geometry The built-in prism base creates a secure seating for round or cylindrical posts, while the flat magnet face maintains stable contact on planar surfaces; this dual contact geometry expands the range of applications from machine tables to cylindrical workpieces. The on/off control prevents inadvertent sliding during repositioning and allows controlled release when changing measurement points. As a result, set‑up times are reduced and workflow efficiency in quality control and workshop inspection is increased, delivering a measurable productivity benefit for repetitive measurement tasks. Workshop resilience and practical dimensions Designed for everyday use in industrial environments, the magnetic base combines rugged construction with manageable weight — approximately 1.2 kg — ensuring easy handling without sacrificing steadiness. The compact dimensions (61 x 50 x 55 mm) make it suitable for confined spaces and bench‑top applications where larger holders would obstruct access. The unit’s nominal holding force and mechanical interface are particularly well suited to indicator stands and magnetic posts used in metalworking, toolroom inspections and assembly control, providing a dependable foundation for repeatable readings and faster set‑ups. Choose the Metav IndustryLine magnetic base for secure, quick and compatible indicator mounting — contact Metav Werkzeuge in Emmerich for precise delivery and specialist advice. Technical Data Article number: M208.103 GTIN: 4054469104539 ECLASS: 21170601 Tariff number: 90319000 Facts Holding force: 80 kg Thread: M10 Weight: 1.2 kg Dimensions: 61 x 50 x 55 mm Special features On/off magnetic control Prism foot for round rods and cylindrical posts Intended for magnetic stands and indicator fixtures Category: Magnetic stands (magnetic bases) FAQ What holding capacity does the magnetic base offer? The magnetic base delivers a nominal holding force of 80 kg, providing stable support for indicator stands and similar measurement fixtures. Which thread is used for attachments? The unit uses an M10 threaded connection, making it compatible with standard indicator stems and mounting posts for measurement setups. Is the base suitable for cylindrical and flat surfaces? Yes, the prism foot secures cylindrical posts while the flat magnet face provides firm contact on planar ferrous surfaces, enabling versatile use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80kg Magnetic Base M8 With On/Off Switch And Prism Foot - Metav IndustryLine
Reliable holding and simple on/off control make this magnetic base an efficient choice for mounting indicator posts; the M8 thread and 80 kg nominal holding force suit standard measuring fixtures and provide consistent clamping in daily workshop use. Order the magnetic base directly via Metav Werkzeuge or ask the consultants if further clarification is required. Magnetic Base M208.102 — Magnetic base with 80 kg holding force and M8 thread (Metav IndustryLine) Magnetic Base M208.102 is a compact magnetic holder for indicator stands and measuring fixtures, combining a strong nominal holding force with an integrated on/off switch and a prism foot for secure contact with round components 80 kg nominal holding force Integrated on/off magnetic switch Prism foot for cylindrical parts M8 threaded connection for indicator posts Firm support where accuracy matters The 80 kg nominal holding force provides a stable foundation for comparators and dial indicators, reducing the risk of movement during measurement. The built-in on/off switch simplifies clamping and release, eliminating the need for auxiliary tools and speeding up setup times. This combination improves process reliability by keeping fixtures secure without sacrificing the ability to reposition quickly. The design therefore supports efficient inspection workflows and predictable measuring outcomes. Precise seating for round and flat workpieces The prism foot allows direct contact with cylindrical surfaces, while the flat areas of the base accommodate planar parts, making the holder suitable for a range of measuring tasks on the shop floor. The M8 thread accepts common indicator posts and accessory stems, enabling quick integration into existing stands and fixtures. These features translate to fewer compatibility issues and a shorter time-to-measure during routine checks and setup operations. Compact footprint and easy handling With overall dimensions of 61 x 50 x 55 mm and a mass of 0.95 kg, the unit combines portability with enough mass to remain steady under load. The compact footprint reduces obstruction around the workpiece and permits closer placement of gauges in tight arrangements. The modest weight keeps manual handling straightforward while the solid magnetic system maintains the necessary holding capacity for everyday metrology tasks. Built for workshop demands Constructed to serve as a practical clamping element in indicator stands and magnetic fixtures, the magnetic base offers predictable performance in repetitive measurement tasks. The magnetic system and mechanical interfaces are designed for regular use, supporting rapid fixturing and repeatable positioning. As part of the Metav IndustryLine range, the holder aligns with the vendor’s focus on delivering accessible, dependable precision tools suited to industrial and trade environments. Choose the Metav IndustryLine magnetic base for secure, fast measurement set-ups — contact Metav Werkzeuge by email or phone to arrange supply or request technical details Technical Data Article number: M208.102 GTIN: 4054469104515 ECLASS: 21170601 Customs tariff number: 90319000 Facts Holding force: 80 kg Thread: M8 Weight: 0.95 kg Dimensions: 61 x 50 x 55 mm Special features Integrated on/off magnetic switch Prism foot for cylindrical parts Threaded M8 connection for indicator posts Category: Magnetstative FAQ Is the holding force sufficient for mounting heavy indicator arrangements? The Magnetic Base M208.102 delivers an 80 kg nominal holding force, which is suitable for most standard indicator stands and moderate accessory loads in workshop and inspection environments. Can the base be used directly on round shafts and tubes? Yes, the integrated prism foot on the Magnetic Base M208.102 is specifically designed for secure contact with cylindrical components, improving stability on shafts and pipes. Which thread size is provided for accessory mounting? The product is supplied with an M8 threaded connection, compatible with common indicator posts and mounting stems used in measuring stands. How portable is the magnetic holder for use at different workstations? Weighing 0.95 kg and measuring 61 x 50 x 55 mm, the unit is compact enough for frequent repositioning while still offering the necessary mass for stable clamping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Magnetic Base With M10 Threaded Bush, 78 kg Holding Force, 18mm Height - Metav IndustryLine
Take advantage of the combination of a 78 kg holding force, a compact Ø80 × 18 mm footprint and an M10 threaded socket for fast, repeatable mounting of measuring stems; order directly via Metav Werkzeuge or ask the consultants for application advice. Permanent magnetic base M208.128 — Magnetic base, 78 kg holding force, Ø80 × 18 mm (Metav IndustryLine) A Permanent magnetic base M208.128 designed to secure measuring stands and indicators reliably to flat iron and steel surfaces for workshop and inspection use. Strong holding force: 78 kg magnetic pull M10 threaded socket, 16 mm depth Compact Ø80 × 18 mm round base Designed for measuring stands on steel Stable support that reduces measurement error The compact Ø80 mm round base concentrates a 78 kg holding force into a small footprint to create a vibration‑resistant contact area. That stability translates directly into more consistent readings when using dial indicators or magnetic stands, since unwanted movement at the support is a common cause of measurement scatter. The permanent magnet design requires no external power, ensuring immediate holding performance and uninterrupted use during routine inspection or set‑up tasks. Fast, secure mounting with industrial threading Equipped with an M10 threaded socket and 16 mm insertion depth, the base accepts standard measuring‑stem fittings for rapid assembly and disassembly. This reduces set‑up time on the shop floor and allows one‑hand operation when repositioning a stand. The threaded interface is compatible with most commercial indicator stems, enabling a straightforward retro‑fit to existing magnetic stands and test fixtures while preserving thread engagement and mechanical safety. Workshop durability and practical handling Weighing approximately 0.5 kg, the unit is easy to manoeuvre yet substantial enough to resist lateral shift when under load. The round, low‑profile geometry keeps the centre of mass close to the contact surface for improved repeatability across successive measurements. The construction is optimised for everyday industrial use: robust mounting, minimal maintenance and portable handling make it a pragmatic choice for inspection benches, assembly lines and jig set‑up. The Metav IndustryLine provenance underlines a focus on consistent supply and technical suitability for trade and industry. Contact Metav Werkzeuge for tailored mounting advice and fast dispatch from Emmerich for applications requiring secure magnetic support on flat steel surfaces Technical data Article number: M208.128 GTIN/EAN: 4054469151670 eClass: 24311390 Customs tariff number: 90319000 Facts Magnetic force: 78 kg Diameter: 80 mm Height: 18 mm Thread: M10 × 16 mm Weight: 0.5 kg Special features Round base Permanent magnetic base (no power required) Suitable for measuring stands on flat iron and steel surfaces Category: Magnetstative FAQ How strong is the magnetic pull of this base? The magnetic base delivers a holding force of 78 kg, which is sufficient for secure mounting of indicators and stems on flat iron and steel surfaces when used as intended. Is the thread compatible with standard indicator stems? Yes — the M10 threaded socket with a 16 mm insertion depth accepts common indicator stem fittings, so the permanent magnetic base M208.128 is compatible with most commercial measuring‑stand stems. Can the base be used on non‑ferrous surfaces? No — the magnetic holding principle requires a ferromagnetic contact (iron or steel); the base is specified for use on flat iron and steel surfaces only. Does the unit require any external power or magnet activation? No external power is needed. The device is a permanent magnetic base, delivering continuous holding force without activation. Is the magnetic base suitable for precision inspection tasks? Yes — the concentrated holding force, compact Ø80 mm footprint and low profile support repeatable set‑ups, making it suitable for workshop and inspection applications that require stable mounting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Magnetic Base With M8 Thread, 36 kg Holding Force, Round 13mm Height - Metav IndustryLine
Secure workshop mounting is achieved through the combination of a 36 kg magnetic holding force and a low 13 mm profile, providing a stable, compact base for measuring stands; compatibility with an M8 thread allows rapid integration into standard setups. Order the permanent magnetic base directly via Metav Werkzeuge or contact our consultants for application advice. Permanent magnetic base M8 (M208.126) — 36 kg holding force, 80 mm diameter The Permanent magnetic base M8 (M208.126) is a compact magnetic foot for positioning stands and measuring rods on flat iron and steel surfaces across workshop and metrology applications. 36 kg magnetic holding force M8 threaded mount for standard posts 80 mm diameter, low 13 mm profile Secure on flat iron and steel surfaces Reliable mounting for precise measurement A strong permanent magnet with a 36 kg holding force ensures that measuring posts and indicator stands remain securely fixed during inspection and set-up operations. The low profile of 13 mm reduces lever action at the base, improving rigidity and limiting movement that can distort readings. This combination of force and compactness supports consistent measurement conditions in busy workshop environments, helping to reduce rework and downtime. Fast connection to standard stands and posts The integrated M8 thread provides a conventional mounting point for a wide range of measuring rods and support posts, allowing quick assembly without adapters. Compatibility with common threads speeds up changeovers between tasks and simplifies tooling logistics in the workshop. The threaded interface is optimised for mechanical stability, facilitating reliable clamping of dial indicators, test indicators and small fixtures. Compact round base with effective contact area With an 80 mm diameter round contact face the base offers a good balance between adhesion and manoeuvrability. The circular geometry distributes magnetic force evenly, which is advantageous when attaching to flat iron or steel surfaces where full-surface contact improves grip. The unit’s moderate mass and footprint allow placement in constrained spaces while still providing dependable support for measuring equipment. Practical workshop resilience and versatility Designed as a straightforward, maintenance-free magnetic foot, the device fits into inspection rigs and general workshop stands where a permanent magnetic hold is preferred over mechanical clamping. Suitability for measuring rods on flat iron and steel surfaces makes it well suited to routine set-ups in metalworking and quality-control stations. The robust construction supports repeated daily use, enhancing operational reliability without complex handling. For secure, compact mounting choose the Metav IndustryLine permanent magnetic base M8 (M208.126); contact Metav Werkzeuge for supply and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M208.126 GTIN: 4054469151601 EClass: 24311390 Customs tariff number: 90319000 Facts Magnetic holding force: 36 kg Diameter: 80 mm Height/profile: 13 mm Thread: M8 Weight: 0.45 kg Special features Round base design Suitable for measuring rods on flat iron and steel surfaces Compact, low-profile magnetic foot Ideal for indicator stands and workshop mounting FAQ Is this magnetic base suitable for dial indicators and test indicators? The permanent magnetic base M8 (M208.126) provides a secure mounting platform for dial indicators and test indicators when attached to flat iron or steel surfaces. What holding force can be expected from this magnetic foot? The device features a magnetic holding force of 36 kg, delivering reliable adhesion for most workshop measurement tasks. Which thread does the base accept for posts and stands? The unit is supplied with an M8 threaded connection, allowing straightforward attachment of standard measuring posts and support rods. On which surfaces will the magnet perform best? Optimal performance is achieved on flat iron and steel surfaces where full contact maximises the magnetic grip. Is the geometry of the base relevant for stability? Yes; the 80 mm diameter round contact area distributes magnetic force evenly and supports steady positioning of measuring equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80x60x80 mm Magnetic Base 80 kg With On/Off Switch And Prism Foot, M12 - Metav IndustryLine
Strong 80 kg magnetic holding force combined with an M12 mounting thread and a prism foot ensures stable, repeatable positioning for indicator stands; order the magnetic base directly via Metav Werkzeuge or ask the consultants for tailored advice. Magnetic Base M208.106.6 — Magnetic base with 80 kg holding force and M12 thread (Metav IndustryLine) The Magnetic Base M208.106.6 is a compact magnetic clamping solution with an on/off switch and prism foot, designed for secure mounting of dial indicators and accessories in workshop and inspection environments. 80 kg magnetic holding force On/off switch for quick release Prism base for cylindrical parts M12 thread for universal mounting Reliable holding for precise measurement results A holding force of 80 kg delivers a stable foundation that reduces vibration and movement during measurement tasks, improving repeatability and lowering the risk of rework. The integrated on/off switch simplifies setup and release compared with permanent magnets, allowing rapid repositioning of the stand without tools. Designed to interface with standard mounting posts via the M12 thread, the base provides a quick, mechanically secure connection that supports accurate alignment of indicators and sensors. Versatile support for irregular workpieces The prism base converts a flat magnetic foot into a specialist support for cylindrical components, such as shafts or round housings, enabling solid contact and preventing lateral slippage during inspection. With a mass of 2.15 kg, the unit balances portability with enough substrate weight to maintain contact on vertical or angled surfaces. The combination of prism geometry and strong magnetism makes this base particularly suitable for workshops that measure a mix of flat and round parts using a single stand. Durable design that speeds up workshop workflows Robust construction and a tactile switching mechanism ensure long service life and dependable operation in daily production and metrology tasks. Reduced setup time from the quick‑action switch and the compatibility with common indicator posts translate directly into operational efficiency: fewer adjustments, faster inspections and a steadier process flow. The unit’s straightforward functionality supports standard quality-control routines while delivering the consistency required for repetitive measuring tasks. Contact Metav Werkzeuge for a specification check or to secure the Metav IndustryLine magnetic base with M12 mounting for your inspection setup. Technical data Article number: M208.106.6 GTIN: 4054469104676 Brand: Metav IndustryLine Category: Magnetic stands SKU: M208.106.6 Facts Holding force: 80 kg Weight: 2.15 kg Thread: M12 Customs tariff number: 90319000 Special features On/off switch Prism foot for cylindrical parts Designed for indicator mounting Suitable for magnetic stands FAQ What holding force does the magnetic base provide? The magnetic base provides an 80 kg holding force, offering secure clamping for most dial‑indicator setups and light fixtures. Can the base support round shafts or cylindrical workpieces? Yes, the prism foot is specifically designed to stabilise cylindrical parts so that indicator probes can be positioned reliably. Which thread is used for mounting accessories? Mounting is via an M12 thread, compatible with many standard indicator posts and adapters. Is the unit portable for use across multiple machines? With a weight of 2.15 kg, the base is portable enough for routine repositioning while still providing the mass needed for stable measurements. Is the magnetic base suitable for standard workshop indicators? Yes, the magnetic base is intended to be used with conventional dial indicators and test stands, providing a secure and repeatable mounting solution. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
89 mm Small Magnetic Measurement Stand 17 kg Holding Force Central Clamping, Permanent Base - Metav IndustryLine
Benefit from a compact footprint, 17 kg holding capacity and a central clamping mechanism that secures fine indicator probes for repeatable results; order the Magnet measuring stand M208.113 directly via Metav Werkzeuge or consult the team for application support. Magnet measuring stand M208.113 — small permanent-base stand with central force clamp A Magnet measuring stand M208.113 for precise probe mounting and stable measurement in confined workshop areas. Compact 89 mm height for tight spaces 17 kg permanent magnetic base Central force clamp for secure probing Dovetail mount for fine indicator probes Stable positioning where space is limited The compact design delivers a small footprint combined with a sturdy permanent base so the stand remains dependable in limited‑space setups. With an overall height of 89 mm and a rated 17 kg holding capacity, the unit provides a low centre of gravity that reduces tilting and improves repeatability during routine checks. The permanent magnet base eliminates the need for external power, while the lightweight construction makes repositioning quick and straightforward without compromising stability. This balance of size and holding power suits bench metrology and assembly stations where access is restricted but stable fixation is essential. Central clamping for consistent probe alignment A central force clamp distributes clamping pressure evenly around the probe stem, reducing lateral shift and ensuring consistent contact force for indicators and feeler probes. The dovetail interface supports common fine indicator styles with dovetail guidance, enabling precise alignment of the probe tip to the measurement point. The combination of a controlled clamp mechanism and a rigid mounting interface improves repeatability and reduces operator‑dependent variance, which is particularly valuable in quality control loops and comparative gauges. Practical workshop integration and handling benefits Designed as a universal holder, the stand features a Ø30×25 foot with M4 fastening for secure mounting and a compact body weight of approximately 0.2 kg, which eases handling and storage. The permanent magnetic base is ready for rapid fixturing on ferrous tables and machine beds, while the overall ergonomics speed up frequent setup changes. For operations that require fast switching between checks, the stand offers reliable fixation without the complexity of powered alternatives. Metav’s quality filter ensures that components arrive tested and suitable for industrial use, supporting consistent throughput on the shop floor. For procurement or application advice on the Metav IndustryLine M208.113, contact Metav Werkzeuge in Emmerich for tailored recommendations and ordering assistance. Technical data Article number: M208.113 GTIN: 4054469104829 Tariff number: 90319000 Facts Height: 89 mm Holding force: 17 kg Weight: 0.2 kg Magnet: permanent Foot: Ø30×25, M4 Special features Central force clamp Dovetail probe mount for fine indicators Universal application Compact footprint for confined workspaces FAQ What is the holding capacity of this magnetic stand? The magnetic base provides a holding capacity of 17 kg for the Magnet measuring stand M208.113, ensuring a secure fixture for typical indicator setups. Which probes fit the dovetail mount? The dovetail mount accepts common fine indicator probes with dovetail guidance; the M208.113 is optimised for small‑form indicators used in bench and machine checks. Is the base permanently magnetic or switchable? The M208.113 is fitted with a permanent magnet base, offering continuous magnetic adhesion without the need for a power source. How does the central force clamp improve measurements? The central force clamp distributes pressure evenly around the probe stem, reducing lateral movement and improving repeatability during repeated measurements with the M208.113. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8mm Magnetic And Hydraulic Universal Dial Indicator Stand, 50x60x55 Base, 80N Holding Force - Microtech Metrology
Take advantage of a robust magnetic base with hydraulic locking and an 8 mm indicator receptacle to secure repeatable measurements and speed inspection setup. Choose this stand for its universal workshop compatibility and compact footprint; order directly via Metav Werkzeuge or contact our consultants for specification advice. Magnetic measuring stand — hydraulic locking, 8 mm receptacle, Microtech Metrology A magnetic measuring stand by Microtech Metrology designed for universal workshop use, combining a compact base with hydraulic fine adjustment and an 8 mm stem for standard indicators. *Magnetic base with 80 holding force *Hydraulic fine adjustment for stable locking *8 mm stem compatible with standard indicators *Compact base 50x60x55 mm for workshop benchtops Stable holding and precise positioning for repeatable checks The magnetic base delivers a firm anchorage that reduces vibration and movement during measurement. With a rated holding force of 80, the assembly provides a dependable support point on ferrous surfaces, while the hydraulic locking stabilises the arm without the sudden shocks associated with mechanical clamps. The 8 mm receptacle accepts common dial and digital indicators, so the measuring arrangement can be changed quickly without special adapters. This combination promotes repeatable measurements in routine inspection tasks and reduces setup time on the shop floor. Flexible reach and compact footprint for everyday workshop tasks At a length of 380 mm and a base of 50x60x55 mm, the stand balances reach and space efficiency: enough arm travel for most bench and machine-side checks while remaining easy to position on crowded worktops. The universal design supports a range of inspection scenarios, from alignment and runout tests to comparative gauging. The modest footprint and robust locking mean the assembly stays in place during small adjustments, helping experienced technicians and quality teams maintain a steady workflow without sacrificing bench space. Designed for integration into inspection routines and dependable service life Built as a practical workshop tool, the stand combines straightforward mechanics with robust control for frequent use. The universal character of the product simplifies inventory choices—one device covers multiple tasks—and the hydraulic mechanism minimises operator-induced variation when locking the arm. As a result, the measuring arrangement supports consistent data capture for quality documentation and routine maintenance checks, enhancing process reliability across production and repair operations. Contact Metav Werkzeuge today to discuss how the Microtech Metrology magnetic measuring stand (SKU 161108800) can improve inspection efficiency at your facility — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 161108800 GTIN: 4061905455223 Manufacturer: Microtech Metrology Facts Length: 380 mm Base footprint: 50x60x55 mm Indicator receptacle diameter: 8 mm Magnetic holding force: 80 Special features Universal design Hydraulic locking mechanism Category: Magnetic bases FAQ What indicators fit the receptacle on this stand? The magnetic measuring stand features an 8 mm indicator receptacle, so standard dial and digital indicators with an 8 mm stem mount directly to the Microtech Metrology stand (SKU 161108800). How does the hydraulic locking improve measurement stability? The hydraulic locking on the stand provides smooth clamping action that prevents sudden shifts and reduces operator-induced variations, allowing more stable setups when using the Microtech Metrology magnetic base. What does the holding force value mean in practice? The listed holding force 80 indicates the magnetic base’s grip strength on ferrous surfaces; in practice this helps keep the arm and attached indicator steady during common bench and machine-side inspections. Is the stand suitable for tight benchtop spaces? Yes. With a compact base of 50x60x55 mm and a total length of 380 mm, the unit is designed to offer useful reach while remaining space-efficient for busy workshop benches. Which applications are best served by this product? The universal nature of the stand makes it well suited to alignment checks, runout inspection, comparative gauging and general-purpose workshop measurement tasks where a stable magnetic mounting is required. Manufacturer: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
8mm Magnetic Base Stand Universal, 50x120x55 Base, 130N Magnet Force - Microtech Metrology
Secure, versatile and robust: the magnetic base provides 130 N of holding force, an 8 mm stem for standard indicator fittings and a compact base with dimensions 50×120×55 mm, ensuring stable, repeatable positioning across inspection tasks. Order directly via Metav Werkzeuge or consult their specialists for application advice. Magnetic Base Stand – 130 N holding force, 8 mm stem · Microtech Metrology A magnetic base stand for workshop and inspection applications, designed to hold dial or electronic indicators securely and provide repeatable measurement set‑ups across bench and machine environments. Universal magnetic base for indicator mounting 130 N holding force for secure positioning 8 mm stem diameter for standard indicator fittings Compact base 50x120x55 mm for stable support Secure holding for repeatable measurements The combination of a strong magnetic base and a rigid support rod produces highly repeatable readings during inspection tasks. With a holding force of 130 N, the unit keeps indicators in place under light external forces and during fine adjustments, which reduces measurement drift and rework. The 8 mm stem is compatible with widely used indicator collets and holders, so adapters are rarely needed. This stability shortens set‑up time and supports efficient quality checks on production lines or workbenches. Compact design that improves workshop workflow A compact base measuring 50×120×55 mm gives a low profile and reliable footprint without occupying excessive bench space. The overall rod length of 380 mm provides adequate reach for most small to mid‑sized components while maintaining stiffness to avoid bending errors. The stand’s universal character means it integrates into existing inspection rigs and can be repositioned quickly, helping teams to maintain throughput and reduce non‑productive time between measurements. Simple compatibility with standard measuring equipment Fitted to accept an 8 mm mounting stem, the holder pairs easily with dial indicators and small electronic gauges commonly used in mechanical workshops and metrology stations. The straightforward mechanical interface permits fast swaps of measuring heads and supports both inside and outside measurement set‑ups when used with appropriate indicators. This practical compatibility supports versatile inspection routines without specialised tooling. Built for everyday workshop use and long service life Constructed for routine industrial use, the magnetic base offers a balance of grip and manoeuvrability that is appropriate for machinists, inspectors and maintenance engineers. The base geometry and finish are chosen to resist surface wear while enabling dependable engagement with ferrous table tops or machine beds. The unit’s design emphasises stable support and ergonomic handling, so personnel can position instruments confidently and focus on measurement quality rather than equipment fiddliness. For precise indicator mounting and evaluation of suitability for specific fixtures, contact Metav Werkzeuge to request the Microtech Metrology magnetic base stand (SKU 161113800) and discuss application details — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 161113800 GTIN: 4061905455278 Brand: Microtech Metrology Stem diameter: 8 mm Rod length: 380 mm Holding force: 130 N Base size: 50×120×55 mm Feature: Universal Facts Holding force: 130 N Stem diameter: 8 mm Rod length: 380 mm Base dimensions: 50×120×55 mm Special features Universal application Compatible with standard indicators Compact, stable base Category: Magnetic stands FAQ What holding force does the magnetic base offer? The magnetic base stand from Microtech Metrology provides a holding force of 130 N, giving secure support for most indicator set‑ups while allowing easy repositioning when required. Which indicator stems fit the stand? The holder accepts an 8 mm stem, compatible with standard dial and electronic indicators; adapters are seldom necessary for conventional workshop gauges. Is the stand suitable for bench and machine‑bed use? Yes, the magnetic base stand is designed for both bench and machine‑bed applications where a ferrous contact surface is available, offering stable positioning for routine inspections. How much reach does the support rod provide? The support rod extends to 380 mm, which balances reach and stiffness for accurate measurements on small to medium components. What makes this stand a universal solution? Its mix of a compact footprint, standard 8 mm mounting, and reliable 130 N holding force make the unit adaptable across inspection benches, assembly stations and maintenance tasks (Microtech Metrology, SKU 161113800). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Ø6x340mm Three-Point Coolant Hose 3-Arm Magnetic Base Switchable 80kg Holding Force - Metav IndustryLine
Take advantage of a switchable magnetic base with a holding force of 80 kg together with three flexible coolant hoses fitted with Ø6 x 340 mm nozzles for stable, repeatable coolant delivery; order directly via Metav Werkzeuge or consult the technical team for specification matching. Coolant hose assembly with switchable magnetic base (80 kg) — triple nozzles Ø6 x 340 mm | Metav IndustryLine The Coolant hose with magnetic base is a workshop-fit coolant delivery system for machine tools and fixtures, designed to provide stable mounting and precise coolant direction in metalworking environments. Switchable magnetic base, 80 kg hold Three flexible coolant tubes Nozzles Ø6 x 340 mm each Precise directional coolant targeting Secure magnetic hold for reliable setup The assembly features a switchable magnet with a rated 80 kg holding capacity, ensuring a secure attachment to ferrous machine beds and fixtures. The on/off magnet eliminates the need for additional clamping hardware and reduces set-up time, which supports steady coolant flow under cutting conditions. This stability reduces vibration-related positional drift and improves reproducibility of coolant placement on the cutting zone. Focused coolant jets for targeted heat control Each arm terminates in a nozzle sized Ø6 x 340 mm, delivering a concentrated coolant stream where it is required most. Focused application assists chip evacuation and local temperature control, which helps to extend tool life and improve surface finish. The nozzle geometry prioritises a consistent flow pattern while remaining compatible with common coolant viscosities used in machining. Flexible routing to reach confined areas The hoses are engineered for ease of positioning: flexible hoses allow multiple bending points and fine adjustment without tools. This adaptability is advantageous for fixtures, small assemblies and multi-axis machines where fixed coolant lines cannot be routed effectively. The segmented design permits precise alignment of the coolant stream to narrow contact zones or internal passages. Workshop-appropriate weight and ergonomics At approximately 1.6 kg, the unit is lightweight enough for single-person handling yet robust in operation. The compact footprint and low mass minimise interference with machine guards and tooling envelopes, supporting safe machine access and convenient repositioning between operations. The balanced design reduces the risk of inadvertent movement during setup. Compatibility with machine tool environments Designed as a magnetic stand solution for machining applications, the device mounts directly to steel surfaces and is suitable for use on conventional lathes, milling machines and drilling centres. The stable magnetic attachment combined with directed coolant jets supports consistent cooling across repeated setups, which is particularly useful in production environments focusing on cycle-time reliability. Simple maintenance and operational benefits Maintenance is straightforward: external hoses and nozzles can be inspected and cleared without specialised tools, and the magnet switch reduces accidental detachment during service. The combination of reliable hold, precise nozzle geometry and flexible routing results in fewer interruptions and contributes to a more predictable machining process. Choose the Metav IndustryLine coolant hose assembly with its 80 kg switchable magnetic base for dependable, repeatable coolant delivery; contact Metav Werkzeuge in Emmerich for application advice or to request technical matching at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M208.122 GTIN: 4054469104874 ECLASS: 37119001 Facts Pull force: 80 kg Nozzles: Ø6 x 340 mm (3) Weight: 1.6 kg Tariff number: 90178090 Special features Switchable magnetic base Triple coolant hoses Designed for machine-tool mounting Brand: Metav IndustryLine FAQ What is the holding force of the magnetic base? The magnetic base provides a holding force of 80 kg, ensuring firm attachment for the Coolant hose 3x with magnetic base (SKU M208.122) during machining operations. Can the coolant nozzles be positioned individually? Yes, each of the three flexible hoses can be adjusted independently to align the coolant jets precisely with the cutting zone. Is the unit suitable for vertical mounting on machine columns? The switchable magnet is designed for ferrous surfaces; the Coolant hose assembly can be mounted vertically provided the surface is flat and clean to achieve the rated 80 kg hold. What types of coolant are compatible with the nozzles? The nozzles are suitable for standard machining coolants and emulsions commonly used in metalworking; viscosity should be within normal machine-shop ranges to maintain consistent flow. Does the product require special tools for maintenance? No specialised tools are required for routine inspection or cleaning of the hoses and nozzles; simple removal and clearing procedures are sufficient. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø6x340mm Twin Coolant Hose With Switchable 80kg Magnetic Base - Metav IndustryLine
Take advantage of precise, focused coolant delivery combined with a switchable magnetic base and robust 80 kg holding force for secure, repeatable positioning at the machine. Order the coolant hose directly via Metav Werkzeuge or ask the consultants for specification support. Coolant hose M208.121 — Magnetic-base twin 6 mm nozzles, 80 kg hold (Metav IndustryLine) A Coolant hose M208.121 designed for machine-tool coolant routing, featuring two Ø6 × 340 mm nozzle tubes and a switchable magnetic base for reliable, temporary mounting on ferrous surfaces. Two Ø6 × 340 mm nozzles Switchable magnetic base, 80 kg holding force Lightweight: 1.35 kg total weight Twin-line coolant delivery for focused streams Secure, repeatable coolant routing with strong magnetic hold The twin-nozzle assembly delivers focused coolant delivery to small target areas while remaining compact for use on lathes, milling machines and fixtures. The switchable magnetic base provides a secure temporary attachment to ferrous machine beds or housings with an 80 kg holding force, enabling safe single-operator positioning and quick re‑positioning between operations. This combination reduces setup time and supports consistent cooling at the cutting edge, improving tool life and process stability. Practical handling that speeds up workshop workflows With an overall weight of 1.35 kg, the unit is easy to manoeuvre while remaining sufficiently hefty to sit stably when mounted. The pair of Ø6 × 340 mm tubes give extended reach without excessive bulk, allowing targeted coolant application to grooves, shoulder faces or coolant-sensitive features. The compact layout minimises obstruction around the spindle and is suitable where compact, directed coolant streams are required as part of standard machining cycles. Robust design and workshop reliability Built for everyday use, the twin-hose arrangement provides two independent coolant outlets for simultaneous coverage of a tool or workpiece. The switchable magnet eliminates the need for clamps or permanent fixtures during short‑term operations and supports flexible process setups. Backed by Metav IndustryLine’s distribution and quality approach, the product is intended to integrate into standard workshop routines and to contribute to measurable improvements in machining efficiency and repeatability. Contact Metav Werkzeuge in Emmerich to discuss specification matching, delivery options and integration into existing machine setups Technical data SKU: M208.121 GTIN: 4054469104867 Weight: 1.35 kg Holding force: 80 kg Magnet: switchable on/off Nozzles: Ø6 × 340 mm (2×) Tariff number: 90178090 eCl@ss: 37119001 Facts Magnet holding force: 80 kg Nozzle diameter: 6 mm Nozzle length: 340 mm Number of nozzles: 2 Weight: 1.35 kg Special features Switchable magnetic base for temporary mounting Twin-line coolant delivery for focused streams Compact format for confined machine spaces Suitable for machine‑tool coolant routing FAQ How strong is the magnetic base and how is it operated? The magnetic base provides an 80 kg holding force and is operated via an integrated on/off switch that enables quick securing and release on ferrous surfaces. What are the nozzle dimensions and how many outlets are provided? The unit includes two nozzle tubes, each Ø6 × 340 mm, giving two independent coolant outlets for targeted application. Is the unit suitable for use on lathes and milling machines? Yes, the twin-nozzle configuration and compact footprint are suitable for use on lathes, milling machines and fixtures where directed coolant application is required. How heavy is the assembly and does it affect handling? The total weight is approximately 1.35 kg, which balances portability with stability for straightforward single‑operator positioning. Can the twin hoses be positioned independently? The two hoses are arranged to allow flexible orientation so that each stream can be directed to a specific target area while the magnetic base secures the assembly to the machine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
⌀24mm Thread Adapter M8 to M10, 15mm Thick, M8x8mm Thread, M10 - Metav IndustryLine
Take advantage of straightforward thread conversion together with a compact flange form and low mass for reliable fixture adaptation in metrology and workshop applications; order the adapter directly via Metav Werkzeuge or request advice from our consultants if clarification is needed. Thread adapter M8 to M10, Ø 24 mm, 15 mm thickness — Metav IndustryLine Thread adapter M8 to M10, Ø 24 mm, 15 mm thickness provides a simple, robust solution for converting an M8 threaded fixing into an M10 mounting point, ideal for adapting existing fixtures and measuring accessories. Thread adapter M8 to M10 Ø 24 mm compact flange 15 mm thickness for stable mounting Lightweight — 0.2 kg Convert existing fixings without reworking components A dedicated thread adapter simplifies the transition from an M8 fixing to an M10 thread, eliminating the need for re-machining or new tapped holes. The compact Ø 24 mm flange concentrates clamping forces close to the fixing point, which supports consistent seating and repeatability during fixture changes. This conversion is particularly valuable in metrology environments where maintaining datum positions and minimising setup time are essential for production throughput and inspection consistency. Compact geometry that supports stable mounting and repeatable measurement The adapter’s 15 mm thickness and reduced overhang contribute to mechanical stability, helping to keep the mounted element aligned under lateral load. With a mass of 0.2 kg, the component adds minimal inertia to assemblies while still providing a robust interface between different thread standards. These attributes reduce the risk of micro-movements that could otherwise compromise dimensional checks, so the adapter assists in preserving precision throughout repeated tool or gauge changes. Practical inventory management and operational efficiency Standardising on a small range of adapters decreases the variety of specialised fastenings and fixtures in stock, yielding a measurable efficiency gain in procurement and faster changeovers at the bench. The simple function of the adapter—converting M8 threads to M10—offers a cost-effective route to reuse high-value accessories and measuring heads that would otherwise require bespoke adaptors or replacements, supporting lean workshop practices and shorter machine or inspection downtime. Installation guidance and inspection considerations Installation is straightforward: the adapter engages the female M10 receptacle while accepting the M8 fastener, providing a low-profile connection. As a mechanical accessory, the component does not require calibration and is intended for secure mechanical use rather than measurement certification. Regular visual inspection for wear or thread damage is recommended as part of routine maintenance to assure continued reliability and safe operation in industrial use. Contact Metav Werkzeuge today to discuss compatibility with existing fixtures and to order the Metav IndustryLine thread adapter M8 to M10 (SKU M206.110) for quick integration into production or inspection setups. Technical Data Article number: M206.110 GTIN: 4061905053580 Weight: 0.2 kg Dimensions: Ø 24 x 15 mm EClass: 21130112 Facts Thread sizes: M8 → M10 Flange diameter: 24 mm Thickness: 15 mm Mass: 0.2 kg SKU: M206.110 Special features Thread conversion M8 to M10 Compact flange design Low mass for minimal added inertia Reusable mechanical adapter Intended for mechanical fixing/adaptation FAQ Which thread sizes does the adapter convert? The thread adapter converts an M8 fastening to an M10 mounting point, enabling the use of M10 fixtures where only an M8 thread exists. What are the outer dimensions of the adapter? The adapter has a flange diameter of 24 mm and a thickness of 15 mm, as stated for the Metav IndustryLine thread adapter M8 to M10 (SKU M206.110). Is the adapter intended for precision measurement or does it need calibration? This adapter is a mechanical conversion accessory and does not require calibration; it is not a measuring instrument and is used to adapt threads mechanically. How much does the adapter weigh and does the mass affect fixtures? The adapter weighs 0.2 kg; the low mass minimises added inertia while providing a stable interface between thread sizes. Can the adapter be reused for multiple fixture changes? Yes, the adapter is designed for repeated use as a conversion element between M8 and M10 fixings, subject to routine inspection for thread wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Reliable positioning for precise measurement at the machine
Magnetic base stands, also known as magnetic stands or magnetic mounting stands, provide stable, repeatable fixation for dial indicators, test indicators and small workpieces directly at the machine. The product group includes everything from heavy-duty units to compact mini versions, all designed to keep measurement devices exactly where they are needed during inspection and setup.
How magnetic base stands work and where they belong
The core of a magnetic base stand is a magnetic block base with a prism-shaped sole on some models for secure mounting on shafts. A multi-jointed adjustable arm with various end fittings carries the measuring instrument and allows fine positioning. Models differ by clamping concept — central mechanical clamping or individual joint adjustment — and by actuation, for example a switchable magnetic base operated via a rotary switch. Typical holding forces are 60 kg or 80 kg for standard bases; mini magnetic stands deliver significantly lower retention suitable for lighter gauges.
Practical benefits that improve workshop efficiency
- Significantly reduced setup time through rapid magnetic fixation and flexible arm positioning.
- Improved measurement stability thanks to high holding force and prism options for shaft mounting.
- Versatile use across inspection, alignment and on-machine measurement tasks with dial indicators and feeler gauges.
- Choice of specialised designs such as hydraulic magnetic stands, vacuum stands and models with fine adjustment for sensitive tasks.
- Compact mini stands for confined spaces where a full-size base would be impractical.
Why Metav is the sensible partner for magnetic base stands
As a precision partner, Metav combines practical range and market trust to make accurate measurement accessible to every workshop. With over 48,000 customers, a selection of more than 250,000 products and a logistics and quality hub in Emmerich that acts as a filter for the European market, Metav ensures reliable supply and knowledgeable product choice. The Metav range focuses on proven workshop solutions such as magnetic clamping prisms and flexible arm stands, supported by product selection guidance for industrial buyers.
In short
Magnetic base stands offer secure, adaptable positioning for on-machine measurement and inspection, reducing setup time and increasing repeatability. Choose between heavy-duty, fine-adjustment and mini options depending on the application.
FAQ
What tasks are magnetic base stands best suited for?
Magnetic base stands are ideal for on-machine measurement, alignment and inspection tasks where a dial indicator or test indicator must be held firmly and positioned precisely.
How strong are the magnets in standard stands?
Standard magnetic base stands commonly provide a holding force of 60 kg or 80 kg, while mini magnetic stands have a lower retention force suited to lighter measuring instruments.
Can magnetic base stands be mounted on shafts?
Yes. Models with a prism-shaped sole and a switchable magnetic base are specifically designed to mount on shafts and cylindrical surfaces, enabling stable positioning for rotational checks.
Which type of adjustment should I choose for fine measurement work?
For sensitive or precision inspection, select a stand with fine adjustment or a model with individual joint clamping; these allow subtle corrections without disturbing the instrument position.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com