Wissenswertes über Messwerkzeuge

Compact, workshop-friendly metrology kit combining a high-resolution 0–10 mm dial gauge with a versatile stand and grip clamp for reliable small-part checks; perfect for routine quality control and setup tasks. The 0.01 mm resolution and analogue simplicity deliver repeatable indications with minimal training. Order the 2-piece measuring set directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine 2-piece Dial Gauge Set — 0–10 mm Dial Gauge with Flexible-Arm Stand and Grip Clamp The Metav IndustryLine 2-piece dial gauge set is a compact metrology solution for precision checks, runout and comparative measurements in small workshops and fine-mechanical applications. 0.01 mm resolution dial gauge Flexible-arm stand for stable positioning Grip clamp for tubes Ø25 mm and sheet 20 mm Compact two-piece kit for micro measurements Precision where space is tight Designed for the micro range, this set covers a 0–10 mm measuring span with an analogue 0.01 mm reading, making it ideal for tasks that demand fine resolution in confined spaces. The small measurement range is matched with mechanical rigidity to reduce bending and torsion during measurement, so that repeatable measurements become the norm rather than the exception. The analogue display keeps interpretation straightforward while maintaining the sensitivity required for runout, depth and comparative checks in precision engineering and watchmaking contexts. Stable mounting for repeatable results The included stand features a flexible arm that allows fast alignment and secure positioning of the gauge over the test piece. The grip clamp is adapted for tubes up to Ø25 mm and sheet material up to 20 mm, enabling a wide variety of fixtures without additional tooling. With a total height of 320 mm and a practical mass that supports steadiness during probing, the assembly reduces setup time and measurement scatter, which in turn supports faster decision cycles on the shop floor and fewer reworks. A compact kit that keeps workshop checks fast Supplied as a two-piece kit, the contents comprise one dial gauge and one measuring stand with the grip clamp, offering a complete, portable solution for routine inspection tasks. The analogue gauge is valued for its robustness and ease of use where digital interfaces are unnecessary or undesired; maintenance is straightforward and calibration intervals are easily managed within existing quality processes. For small-batch production, toolroom set-up or incoming inspection, this compact solution delivers dependable visual feedback that complements digital systems without complication. Choose the Metav IndustryLine dial gauge set for precise micro-range checks and contact Metav Werkzeuge for technical guidance or to secure supply from our Emmerich warehouse Technical Data Article number: M300.019 GTIN: 4054469181523 Contents: 1x dial gauge, 1x flexible-arm stand with grip clamp Weight: 1.8 kg Total height: 320 mm Facts Measurement range: 0–10 mm Resolution: 0.01 mm Pieces per set: 2 Special features Analogue dial gauge with 0.01 mm graduation Flexible-arm stand for fast alignment Grip clamp for tubes up to Ø25 mm and sheet up to 20 mm Compact two-piece measuring set FAQ What is the measurement range and resolution of the set? The set provides a 0–10 mm measuring range with a 0.01 mm analogue graduation, suitable for fine-detail measurements. What is included in the M300.019 kit? The M300.019 set includes one dial gauge and one measuring stand with flexible arm and grip clamp, supplied as a ready-to-use two-piece kit. Can the stand hold round and flat workpieces? Yes, the grip clamp is designed to secure tubes up to Ø25 mm and flat material up to 20 mm, enabling both round and sheet applications. Is the gauge suitable for runout and comparative checks? The analogue indicator and stable mounting make the kit well suited to runout, flatness and comparative inspections in small-part production or toolroom settings. Who manufactures the set and where is it supplied from? The set is part of the Metav IndustryLine range and is supplied via Metav Werkzeuge from Emmerich for reliable European distribution. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of precise self‑centring contact, a compact 10–12 mm measuring range and robust carbide faces ensures fast, repeatable blind‑hole measurements with minimal setup. Order the instrument directly via Metav Werkzeuge or consult the team for application advice. Metav IndustryLine Three‑Point Internal Micrometre MS908.652 — self‑centring, 10–12 mm range The Three‑Point Internal Micrometre MS908.652 is a compact analogue micrometre designed for precise diameter measurement inside blind holes and small bores in the 10–12 mm range. Self‑centring three‑point contact Measuring range 10–12 mm Accuracy 0.004 mm Carbide measuring faces Reliable centring for blind‑hole measurement A three‑point contact ensures rapid and reproducible alignment in blind holes, reducing repositioning time and measurement scatter. The micrometre’s self‑centring mechanism automatically locates the bore centre, so the operator obtains a consistent contact geometry on each measurement. With a measuring span of 10–12 mm the instrument is tailored to micro components and small bores where repeatability and short setup times are essential, improving throughput in small‑part inspection tasks. Durable contact surfaces for longer service life The measuring faces are manufactured as carbide contacts to resist wear and preserve accuracy during frequent use. The unit’s analogue design gives a tactile feel and straightforward reading, paired with a fine adjustment capability to approach tight fits carefully. The compact body (length approx. 54.5 mm) is suited to constrained access, while a setting ring (size 10) is included for verification and quick zeroing, supporting stable traceability in routine quality checks. Practical workflow advantages and workshop integration This three‑point micrometre combines simple operation with technical reliability: measurements are quick, calibration checks are straightforward and the tool integrates easily into existing inspection benches. Classified in the Micro range (max. 10–100 mm), it fulfils typical needs of precision engineering, watchmaking and small‑component production where stiffness, reach and single‑hand operation must be balanced. Metav’s distribution ensures European stock and reliable delivery from Emmerich. Request application guidance or order details from Metav Werkzeuge for the Metav IndustryLine three‑point internal micrometre MS908.652 — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS908.652 Brand: Metav IndustryLine Category: Micrometres Type: Three‑point internal micrometre Measuring range: 10.0–12.0 mm Minimum range: 10 mm Maximum range: 12 mm Accuracy: 0.004 mm Length: 54.5 mm Setting ring: 10 Self‑centring three‑point contact Carbide (hard metal) measuring faces Analogue operation (nonius style) Suitable for blind‑hole bores FAQ How does the three‑point contact improve measurement in blind holes? The three‑point geometry of the MS908.652 centres automatically in a bore, giving a stable contact triangle that reduces wobble and improves repeatability compared with single‑point probes. What measurement accuracy can be expected from this instrument? The instrument is specified with an accuracy of 0.004 mm; in routine use this delivers repeatable diameter readings for small‑bore inspection tasks. Is the micrometre suitable for workshop use or only for laboratory conditions? Designed for practical workshop use, the robust carbide faces and analogue adjustment make the MS908.652 resilient to frequent handling while keeping measurement quality high. How is the instrument returned to zero or checked on site? A setting ring (size 10) is provided for quick verification and zeroing of the micrometre before inspection runs. Which components and applications benefit most from this micrometre? Small bores, precision fittings, watch‑ and micro‑mechanical parts and any blind‑hole diameters in the 10–12 mm range benefit from the compact form, self‑centring contact and carbide faces of the MS908.652. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of three-point contact stability, a colour touchscreen readout and ISO 17025 traceable calibration to secure reproducible internal measurements in the 10.0–12.0 mm range. Order the Three‑Point Internal Micrometer directly via Metav Werkzeuge or consult our specialists for integration advice. Three‑Point Internal Micrometer — digital instrument with Wireless + USB (Microtech Metrology) The Three‑Point Internal Micrometer is a precision instrument for stable internal diameter measurement in small bores, suitable for quality control and bench metrology in workshops and production. Three-point contact for stable internal measurements Colour 1.5" touchscreen for clear readouts Wireless and USB data output for traceable transfer Delivered calibrated to ISO 17025 with certificate Dependable accuracy where tight tolerances matter The instrument combines a three-point contact measuring head with a high‑precision mechanism to reduce runout and centring error, delivering an accuracy of ±0.004 mm across its measuring span. With a measuring range of 10.0–12.0 mm, this device is aimed at fine internal dimensions where repeatability and a low measurement uncertainty are decisive. The robust contact geometry and confirmed specification make it well suited to small‑bore inspection tasks in component finishing and final inspection workflows, supporting a rational decision process for integrating metrology into production control. Seamless data capture for quality documentation Digital measurement is presented on a Colour 1.5" touchscreen for fast reading and reduced interpretation errors; the unit also provides Wireless and USB data output for direct transfer into SPC systems or inspection software. Combined with the included calibration trace, this workflow supports rapid documentation and traceability. The instrument’s readable display and straightforward data export reduce process steps and the risk of transcription mistakes, promoting efficiency and error‑resilient quality reporting in serial inspection and laboratory environments. Practical design for everyday workshop use A compact measuring head with an extended measuring depth of 154 mm keeps handling comfortable while reaching into bores and recesses. A setting ring is included to simplify zeroing and periodic checks. Delivered fully calibrated to ISO 17025, the micrometer arrives with a formal calibration certificate, providing immediate confidence for compliance audits and internal quality routines. The combination of robust measuring geometry, clear digital feedback and certified calibration supports both operational ease and trustworthy results, reinforcing productive workflows and peace of mind in routine inspections. For traceable high‑precision internal measurement solutions from Microtech Metrology, contact Metav Werkzeuge for ordering and application support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 133701210 GTIN: 4061905074202 Manufacturer: Microtech Metrology Numbers Measuring range: 10.0–12.0 mm Measuring depth: 154 mm Accuracy: ±0.004 mm Resolution/readout: 0.0001 mm Special features Digital display: Colour 1.5" touchscreen Data output: Wireless and USB Setting ring: included Delivered calibrated to ISO 17025 with certificate FAQ Is the instrument delivered with a calibration certificate? Yes. The Three‑Point Internal Micrometer from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability. What measurement range is covered by this micrometer? The device covers internal diameters from 10.0 to 12.0 mm and is designed specifically for high‑precision work within that span. How is measured data transferred to a PC or quality system? Measurement results can be exported via both Wireless and USB connections, enabling straightforward integration into inspection software and SPC workflows. What advantage does the three‑point contact offer? Three contact points centre in the bore automatically, reducing eccentricity and improving repeatability compared with two‑point methods, which is why this geometry is preferred for small‑bore internal measurements. Can the micrometer reach recessed bores? Yes. The instrument’s 154 mm measuring depth allows access to deeper internal features while maintaining the necessary measurement stability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Reliable 11 mm limit plug gauge manufactured from hardened steel and produced to DIN 7162 ensures consistent go/no‑go inspection and predictable wear behaviour; order directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge MS911.215 — Filetta, 11 mm, hardened steel (DIN 7162) The Limit plug gauge MS911.215 is a precision inspection pin for go/no‑go checks of internal diameters in production and quality control environments. Hardened steel for long service life DIN 7162 standard compliance 11 mm nominal diameter for bore checks Wear allowance on good side Consistent inspection backed by an industry standard This gauge pin delivers reliable, repeatable checks for internal bores, designed to support standardised quality workflows. Manufactured in accordance with DIN 7162, the tool provides a clear reference for pass/fail decisions and integrates readily into established inspection sequences. The 11 mm nominal dimension is presented as a precise measuring reference, and the geometry of the pin minimises wobble during insertion to improve repeatability and reduce measurement scatter in serial inspection. Robust construction for long operational life Made from hardened steel, the pin resists surface damage and maintains its working diameter under frequent use. The design incorporates a wear allowance on the good side, which signals gradual material loss without compromising the functional check; this feature extends usable life while making wear visible during routine inspections. For workshops that demand low downtime, the material choice and finish reduce the need for frequent replacement and support uninterrupted production checks. Practical application and handling in the workshop The plug gauge is intended for quick go/no‑go checks on internal diameters in machining, assembly and incoming inspection stations. Its compact form enables fast handling and clear pass/fail interpretation, supporting efficient throughput without complex procedures. Markings and standard conformity simplify traceability and documentation, while the sturdy construction keeps maintenance straightforward and predictable. The Filetta badge denotes established toolmaking expertise and suitability for industrial environments where dependable gaging is required. For application-specific advice on using this Filetta limit plug gauge and to obtain supply directly from Metav Werkzeuge in Emmerich, contact our team for tailored recommendations and fast delivery Technical data Article number: MS911.215 Manufacturer: Filetta Material: hardened steel Facts Nominal diameter: 11 mm Special features DIN 7162 compliant Wear allowance on good side Application: internal bore go/no‑go inspection Category: gauge pins / plug gauges FAQ What is the primary application of this gauge? The Filetta limit plug gauge MS911.215 is intended for go/no‑go inspection of internal diameters during production and quality control. What does the wear allowance on the good side mean? The wear allowance indicates a deliberate tolerance on the pass side so that gradual surface wear can be detected without immediately affecting the go/no‑go result, extending usable life. Is this gauge compliant with recognised standards? Yes, the plug gauge is manufactured in accordance with DIN 7162, which governs limit gauge design and marking. What is the exact nominal size of the pin? The nominal diameter is 11 mm; reference and tolerance interpretation follow DIN 7162 specifications. Which workshop environments are suitable for this tool? The gauge is suited to machining, assembly and incoming inspection where compact, rapid internal diameter checks are required; its hardened steel construction supports frequent use. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of precise, fast pass/fail checks and robust wear resistance thanks to hardened steel and DIN 7162 conformity; order the matching gauge pins directly via Metav Werkzeuge or contact our consultants for batch and inspection advice. Limit Gauge Pin — hardened-steel inspection pin, 11 mm, DIN 7162 (Filetta) The Limit Gauge Pin is a hardened-steel inspection pin designed for rapid go/no-go checks and routine dimensional control in workshops and inspection benches, compliant with DIN 7162. Hardened-steel construction for long service life Conforms to DIN 7162 for consistent tolerances 11 mm nominal diameter for standard inspection tasks Wear allowance on the good side to extend usable life Faster, reliable pass/fail inspection for production lines The compact inspection pin delivers quick go/no-go checks that reduce measuring time at control points and on the shop floor. By providing an unequivocal pass or fail condition, the pin supports efficient decision-making in both single-piece inspections and repetitive sampling routines. Conformity with DIN 7162 ensures that the nominal diameter and tolerance band are traceable to an established standard, which simplifies integration into existing inspection protocols and statistical process control. Robust build that minimises downtime Thanks to its hardened steel construction the pin withstands repeated contact without rapid degradation, while the specified wear allowance on the good side preserves the functional limit for longer. This translates into fewer replacements, reduced downtime and lower indirect costs from inspection interruptions. The hardened surface also keeps seating and mating surfaces consistent, helping to avoid false rejects that would otherwise increase rework. Practical benefits for inspection benches and gauge sets As a dedicated inspection pin, the component is optimised for quick handling and straightforward verification tasks on inspection benches and assembly jigs. The clear go/no-go characteristic reduces interpretation time for operators and speeds up routine quality checks. For quality managers the result is measurable: quicker throughput at control stations and a more consistent acceptance rate across batches. Traceability and suitability for regular quality workflows Manufactured to industry standard, the pin supports consistent batch-to-batch performance and straightforward inventory management when used in gauge sets or fixed inspection fixtures. The simple geometry and standardised tolerance regime make the item suitable for assembly audits, incoming inspections and periodic verification of tool wear, providing procurement confidence for maintenance and quality teams. Request technical advice or a batch availability check from Metav Werkzeuge in Emmerich to align delivery options with production schedules Technical Data Article number: MS911.173 Name: Limit Gauge Pin Material: hardened steel Standard: DIN 7162 Measurements / Core data Diameter: 11 mm Features / Applications Wear allowance on the good side Hardened for wear resistance Intended for go/no-go inspection tasks Category: gauge pins / inspection pins FAQ What is the nominal diameter of this inspection pin? The inspection pin has a nominal diameter of 11 mm; this specification applies to the Filetta limit gauge pin (SKU MS911.173). Is the pin suitable for go/no-go checks on assembly lines? Yes, the Filetta limit gauge pin is designed for rapid pass/fail checks and is suitable for routine assembly-line and workshop inspections. What material is used and how does it affect service life? The pin is made from hardened steel, which increases wear resistance and extends usable life compared with untreated pins. Which standard governs the pin’s tolerances? Tolerances and dimensions conform to DIN 7162, providing a recognised reference for inspection procedures. How does the wear allowance on the good side affect inspection practice? The specified wear allowance on the good side allows continued use while preserving the functional limit for a longer period, reducing unnecessary replacements Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Die besonders positiven Bewertungen von Metav Werkzeuge stehen für 42.000 überzeugte Kunden. Mache Deine eigenen Erfahrungen und shoppe bei metav-shop.de.! Das wichtigste auf einen Blick waagerecht Messbereich: bis 999mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 Lang messen, klar entscheiden – bis 999mm Bis 0–999mm deckst du kleine und große Aufgaben ab. Du bleibst flexibel, auch wenn das Teil länger wird. Das spart Zeit und Nerven. Gut für Holz, Metall und Kunststoff. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. DIN 862 Unser Messwerkzeug basiert vollständig auf den Richtlinien der DIN 862. Dies betrifft sämtliche Produktionsschritte und Kalibrierverfahren ebenso wie die eingesetzten Materialien. Die so gewährleistete Maßhaltigkeit und Wiederholgenauigkeit sorgt für einheitliche Qualitätsstandards und internationale Vergleichbarkeit – ein entscheidender Vorteil bei Audits und Kundenfreigaben. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem erstklassigen Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 Produktmerkmale: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.361 Zahlen & Daten: Messbereich: 0-999mm Gewicht: 0,7kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,07mm Länge: 1130mm Besonderheiten Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf man achten sollte, wenn man einen Messschieber kaufen möchte: Neben der Präzision und dem Betriebsbereich sind erweiterte Eigenschaften wie die Funktionalität zum Datenoutput oder die Messkraftverwaltung von großer Signifikanz. Im Umfeld der Qualitätssicherung und in Laboreinrichtungen ist ein Messschieber mit kontrollierter Anwendungskraft besonders hilfreich. Ebenso sollte man überlegen, ob die Kalibrierung des Messschiebers erforderlich ist. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden.

Technical Overview:Manufacturer: KERNModel: Industry counting scaleMaterial: Gehäuse aus Kunststoff und Wägeplatte aus EdelstahlReadout: 0,1 g; 0,2 g - 5 g; 10 gIndustry counting scale quick and easy order Online!!

Take advantage of the combination of hardened steel construction, DIN 7162 conformity and a built‑in wear allowance on the go side for reliable go/no‑go checks and long service life. Order the limit gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Limit gauge pin – 12 mm, hardened steel (Filetta) The limit gauge pin is a hardened‑steel plug gauge designed for quick go/no‑go diameter checks and conformity inspection to DIN 7162 in workshop and inspection environments. Hardened steel construction Conforms to DIN 7162 for plug gauges 12 mm nominal diameter Wear allowance on the go side Consistent inspection performance for production control The limit gauge pin provides a compact, robust solution for repetitive acceptance checks where consistent tactile feedback and repeatability are required. Made from hardened steel, the pin resists deformation and preserves its tolerance band during frequent handling, so inspection intervals remain predictable. Conformity to DIN 7162 ensures compatibility with established go/no‑go inspection procedures, simplifying integration into existing quality checks and reducing stoppages caused by ambiguous results. Durable design that minimises downtime A hardened, ground construction and the specified wear allowance on the go side extend usable life and enable predictable replacement scheduling. The wear allowance is a deliberate oversize on the good (go) face that compensates for gradual surface loss without affecting the no‑go function; this reduces the risk of false passes and helps keep rework rates low. The simple geometry of a plug gauge also allows rapid manual handling and reduces the time required for routine dimension verification in production and assembly operations. Practical fit for workshop and inspection use Designed for straightforward go/no‑go diameter verification, the pin suits machining workshops, toolrooms and incoming inspection stations where quick, unambiguous checks are needed. The combination of a plain cylindrical form and DIN 7162 standardisation supports easy comparison across gauges and fixtures. Traceability is supported by the clear article designation (MS911.216) and concise specification, so the gauge can be referenced in inspection reports and procurement lists without ambiguity. Contact Metav Werkzeuge for procurement and technical guidance on Filetta limit gauge pins; our Emmerich team provides fast delivery and product advice Technical Data Article number: MS911.216 Name: Limit gauge pin Material: hardened steel Standard: DIN 7162 Specifications Nominal diameter: 12 mm Special features Wear allowance on the go side Hardened and ground construction Intended for go/no‑go diameter checks FAQ What is the primary application of this gauge? The Filetta limit gauge pin (MS911.216) is intended for quick go/no‑go checks of bore and shaft diameters according to DIN 7162 for production and inspection tasks. How does the wear allowance affect use? The built‑in wear allowance on the go side extends service life by compensating for surface wear, so the Filetta plug gauge maintains reliable go/no‑go performance over many cycles. Is the material suitable for workshop handling? Yes, the hardened steel construction of this gauge pin provides resistance to deformation and wear, making it suitable for regular workshop and inspection use. Which standard does the gauge follow and why is that important? Conformance to DIN 7162 ensures the plug gauge meets recognised geometric and dimensional criteria, simplifying its integration into standardised inspection procedures and documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of robust hardened steel construction and DIN 7162 conformity to secure reproducible bore checks; the built‑in wear allowance on the good side extends service life and simplifies limit interpretation. Order the Filetta items via Metav Werkzeuge or contact our consultants for application advice. Limit plug gauge by Filetta — hardened steel, DIN 7162, Ø 12 mm, G7 Limit plug gauge designed for rapid acceptance checks of internal diameters in production and incoming‑goods inspection Hardened steel for durable measurement Conforms to DIN 7162 standard Wear allowance on the 'go' side Reliable diameter assessment that speeds inspection throughput The limit plug gauge serves as a straightforward go/no‑go check for cylindrical bores, offering rapid verification without complex setup. Machined to a nominal diameter of 12 mm with the designation G7, the pin provides an immediate pass/fail indication that reduces inspection time compared with full dimensional measuring chains. The hardened construction minimises deformation under repeated use, which keeps the checking routine stable and helps maintain production rhythm. For shop floors and control benches where speed and repeatability matter, the gauge translates metrological specification into a clear decision at the point of measurement. Durable design that reduces replacement and downtime Made from hardened steel, the gauge withstands frequent handling and contact with metal workpieces. A specific wear allowance on the good side compensates for gradual material loss, so the go end retains acceptance criteria longer and service intervals are extended. This pragmatic feature lowers life‑cycle costs by delaying the need for reworking or replacement and by keeping inspection standards consistent. The combination of robust material and wear management supports continuous operation in industrial environments where tools are subject to intensive use. Simple integration into quality processes and documentation Conforming to DIN 7162 assists traceability in formal inspection plans and quality records. The plug gauge is suitable for routine acceptance checks in production, final inspection and incoming goods control where clear binary results are preferred. The concise form factor and unambiguous results streamline operator training and reduce human decision variance, which improves overall process capability. When used as part of a calibrated inspection set, the gauge helps to demonstrate compliance and to maintain documented control over critical bore dimensions. Practical benefits for workshop and production use This gauge simplifies everyday metrology: no complex calibration rigs are required for routine use, and the hard wearing surface minimises surface damage to both gauge and workpiece. The compact geometry facilitates access to bores in assemblies and jigged components, while the standardised dimensioning and tolerance marking enable easy cross‑referencing with drawing specifications. For manufacturing teams seeking dependable, low‑effort tools for Go/No‑Go inspection, the pin combines industrial robustness with clear operational benefits. Choose the Filetta limit plug gauge with G7 tolerance via Metav Werkzeuge for dependable in‑process checks; contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS911.174 Product: Limit plug gauge Brand: Filetta Facts Nominal diameter: 12 mm Standard: DIN 7162 Designation: G7 Special features Material: hardened steel Wear allowance on the go side Intended for go/no‑go bore inspection FAQ What size bore is this gauge intended to check? The gauge is supplied as a 12 mm nominal limit plug gauge and is intended for quick go/no‑go checks of bores matching that nominal diameter. Is the gauge suitable for production use on a shop floor? Yes, the hardened‑steel construction and the wear allowance on the good side make the gauge robust enough for routine production and incoming‑goods inspection. How does the G7 designation influence measurement results? G7 is the designation provided with the article and identifies the tolerance fit intended for interpretation against corresponding drawing tolerances when using the plug gauge. Does the gauge comply with industry standards? The item is produced to conform with DIN 7162, facilitating inclusion in standard inspection procedures and documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of precise 0.05 g readability, a 6 kg capacity and a stainless steel weighing plate to improve portioning accuracy and quality control. Order the unit directly via Metav Werkzeuge or consult our advisors for application-specific guidance. KERN GAB.6K0.05N tabletop scale — 6 kg capacity, 0.05 g readability The GAB.6K0.05N is a compact tabletop scale for control and portioning, engineered to support laboratory checks and precise workshop weighing tasks. High resolution 0.05 g readability Capacity up to 6 kg Stainless steel weighing plate Internal rechargeable battery option Consistent accuracy that reduces rework and waste The combination of a high-resolution 0.05 g display and a robust strain gauge weighing system delivers repeatable results for routine checks and small-batch production. Linearity of ± 0.00015 kg and reproducibility of 0.00005 kg mean that measured values remain reliable over repeated cycles, which supports process control and reduces sorting or rework. Clear numerical data and standardised measurement behaviour simplify documentation and traceability in quality procedures. Faster portioning and counting with clear readout A generous LCD with 24 mm digit height provides unambiguous readings for quick portioning and piece counting. The scale supports low piece-weight detection down to 50 mg for laboratory counting and 500 mg under normal counting conditions, enabling accurate small-part inventories. The rectangular stainless steel platform (294×225 mm) combines hygienic surface properties with a work-friendly footprint, making the unit suitable for both bench-top labs and production lines where swift, reliable measurement is essential. Built for workshop conditions and straightforward integration Compact housing dimensions of 320×330×125 mm and a net weight of 3 kg allow flexible placement at a workstation or inspection bench. The unit accepts 220–240 V AC mains power (50 Hz) and includes plug adapters for CH, EURO and UK markets; an internal rechargeable battery is available for intermittent mobile use with a 12 h charge time. Environmental tolerances—operating temperature 0 °C to 40 °C and up to 80% relative humidity—mean the instrument will perform dependably in standard industrial or laboratory environments. Contact Metav Werkzeuge in Emmerich for availability, stock details and tailored advice on KERN weighing solutions — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer: KERN SKU: GAB.6K0.05N Article number: GAB-N GTIN: 4045761111622 Country of origin: CN Facts Readability: 0.05 g Maximum capacity: 6 kg Weighing plate dimensions: 294×225 mm Housing dimensions: 320×330×125 mm Display digit height: 24 mm Weight: 3 kg Linearity: ± 0.00015 kg Reproducibility: 0.00005 kg Smallest piece weight (counting, lab): 50 mg Smallest piece weight (counting, normal): 500 mg Operating temperature: 0 °C to 40 °C Max ambient humidity: 80% Power supply: 220 V–240 V AC, 50 Hz Battery charge time: 12 h Special features Weighing plate: stainless steel Weighing system: strain gauge Display type: LCD Power supply adapter included: CH; EURO; UK Mains adapter type: plug-in power supply Intended use: control and portioning Eclass: 27320401 Commodity code: 84238129 FAQ What capacity and resolution does the scale offer? The KERN GAB.6K0.05N tabletop scale provides a maximum capacity of 6 kg with a readability of 0.05 g, suitable for fine portioning and control tasks. Can the unit be used away from a fixed power source? The GAB.6K0.05N supports an internal rechargeable battery option; charging requires approximately 12 hours and enables intermittent mobile use. Is the weighing surface suitable for frequent cleaning? The weighing plate is made of stainless steel, offering a hygienic surface that is straightforward to clean and resistant to routine workshop contamination. How precise is the scale for counting small parts? Counting precision is supported down to 50 mg under laboratory counting conditions and 500 mg for normal counting, assisted by the high resolution and reproducibility specifications. Which power adapters are included for international use? The scope of delivery includes plug adapters for CH, EURO and UK markets to accommodate standard mains connections. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271

Hocheffiziente Kombination aus hoher Genauigkeit 0,002 mm und praktischer Datenübertragung per Wireless+USB für reproduzierbare Messabläufe. Bestellen Sie die Messuhr direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messuhr Digitalmessuhr von Microtech Metrology Die Messuhr ist eine digitale Präzisionsmessuhr mit Touchdisplay und kabelloser Datenschnittstelle für präzise Werkstatt‑ und Laboranwendungen. Hohe Genauigkeit von 0,002 mm ISO 17025 Kalibrierung mit Kalibrierzeugnis Color 1.54" Touchscreen für einfache Bedienung Wireless+USB Datenausgang für Datenerfassung Schutzart IP 54 für staub- und spritzwassergeschützten Einsatz Präzision, die Nacharbeit reduziert Die digitale Messuhr liefert eine Genauigkeit 0,002 mm bei einer Ablesung von 0,0001 mm, was Messunsicherheiten sichtbar verringert und Nacharbeit reduziert. Die Lieferung erfolgt mit ISO 17025 Kalibrierung; das bedeutet, dass ein zertifiziertes Kalibrierzeugnis beiliegt und Messwerte rückverfolgbar sind. Für Prüfmittelverwaltung und Qualitätsdokumentation sorgt diese formale Kalibrierung für Rechtssicherheit und erleichtert Audit‑Prozesse. Elektronik und Datentransparenz für moderne Prozesse Die Anzeige erfolgt über ein Color 1.54" Touchscreen, das klare Ziffern und einfache Menüführung verbindet. Der Wireless+USB Datenausgang ermöglicht die direkte Übertragung von Messwerten in Prüfsoftware oder Tabellenkalkulationen und minimiert Übertragungsfehler. Die Schutzart IP 54 schützt Elektronik und Mechanik vor Staub und Spritzwasser, sodass Messungen auch in raueren Werkstattumgebungen zuverlässig ausgeführt werden können. Kompakte Bauform und idealer Einsatzbereich Mit einem Messbereich von 0–13 mm (Messbereich_max 12,5 mm) ordnet sich das Gerät in die Kategorie Mikro ein, die sich besonders für feinmechanische Arbeiten eignet. Uhrmacher, Feinmechaniker und Laboranbieter profitieren von der handlichen Bauform, die präzise Innen‑, Außen‑ und Stufenmessungen an kleinen Bauteilen ermöglicht. Die kompakte Ausführung erleichtert das Führen über kleine Konturen und reduziert Verwindungen bei kurzen Messwegen. Reproduzierbare Ergebnisse durch definierte Messkraft Die Messkraft von 0,6–1 N sorgt für gleichbleibenden Kontaktdruck zwischen Messfläche und Werkstück und reduziert damit messbedingte Abweichungen. Die angegebene Umkehrspanne von 0,5 gibt Aufschluss über das Verhalten bei Richtungswechseln und hilft bei der Einordnung der Messunsicherheit in Prüfabläufen. Zusammen gewährleisten diese Werte, dass die Messuhr stabile und vergleichbare Messdaten erzeugt, die sich nahtlos in Qualitätsprozesse einfügen. Empfehlung: Die Messuhr von Microtech Metrology mit ISO‑17025‑Kalibrierung und Wireless+USB ist die wirtschaftliche Wahl für präzise Qualitätsprüfungen — direkt über Metav Werkzeuge GmbH in Emmerich bestellbar oder bei technischen Fragen unsere Beratung per E‑Mail info@metav-werkzeuge.com bzw. Telefon +49 2822 7131930 konsultieren. Produktmerkmale Artikelnummer: 120129137 Marke: Microtech Metrology Bezeichnung: Messuhr GTIN: 4061905042232 Zahlen Messbereich: 0–13 mm Messbereich (max): 12,5 mm Genauigkeit: 0,002 mm Ablesung: 0,0001 mm Messkraft: 0,6–1 N Besonderheiten Digitalanzeige: Color 1.54" Touchscreen Datenausgang: Wireless+USB Digitale Messuhr ISO 17025 Kalibrierung: Kalibrierzeugnis liegt bei Schutzart: IP 54 FAQ Wie genau ist die Messuhr und für welche Prüfungen eignet sie sich? Die Messuhr von Microtech Metrology bietet eine Genauigkeit von 0,002 mm und eine Ablesung von 0,0001 mm, wodurch sie sich besonders für Präzisionsprüfungen in Feinmechanik, Uhrmacherei und Laboranwendungen eignet. Wird die Messuhr kalibriert geliefert? Ja, die Messuhr wird mit ISO 17025 Kalibrierung ausgeliefert; ein Kalibrierzeugnis liegt dem Gerät bei, sodass die Messwerte rückverfolgbar sind. Welche Schnittstellen stehen zur Verfügung, um Messdaten zu erfassen? Die Messuhr verfügt über einen Wireless+USB Datenausgang, der eine einfache Übertragung von Messwerten in Prüf‑ oder Verwaltungssoftware ermöglicht. Ist das Gerät für den Einsatz in der Produktion geeignet? Durch die Schutzart IP 54 und die definierte Messkraft von 0,6–1 N ist die Messuhr robust genug für den Einsatz in anspruchsvolleren Werkstattumgebungen und wiederkehrende Qualitätsprüfungen. Für welche Bauteilgrößen ist die Messuhr konzipiert? Mit einem Messbereich bis 13 mm ist die Messuhr als Mikro‑Werkzeug ausgelegt und ideal für kleine Bauteile und feine Konturen, wie sie in der Feinmechanik und im Formenbau vorkommen. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Nutzen Sie die Kombination aus hoher Messgenauigkeit, digitaler Datenausgabe und kompakter Bauweise für präzise Innenmessungen. Bestellen Sie das Innen-Feinmessgerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Innen-Feinmessgerät von Microtech Metrology Das Innen-Feinmessgerät ist ein digitales Feldgerät zur präzisen Innenmessung mit Touchscreen und kabelloser Datenübertragung. Kompaktes Mikro‑Messgerät für feine Innenmaße Präzision: Genauigkeit ±0,012 mm Touchscreen 1,54" für einfache Ablesung Drahtlose und USB-Datenübertragung Hohe Messtiefe: 750 für schwer zugängliche Stellen Präzision und Messklasse für feine Werkstückkontrolle Dieses Messgerät gehört zur Mikro‑Klasse und ist damit ideal für sehr kleine Innenmaße im Bereich von 12,60–12,66 mm. Die Genauigkeit ±0,012 mm erlaubt wiederholbare Messungen, die normenahen Qualitätskontrollen und feinmechanische Prüfungen gerecht werden. Die kompakte Bauform reduziert Verwindung und erleichtert das Führen des Messgeräts in engen Bohrungen, sodass Werkstätten und Laboren eine verlässliche Basis für Kontrollmessungen zur Verfügung steht. Bedienkomfort und Datenmanagement für effiziente Prüfabläufe Die Touchscreen‑Anzeige (1,54") sorgt für schnelle Ablesung und reduzierte Fehlinterpretation von Messwerten. Die kombinierte Wireless+USB‑Schnittstelle ermöglicht sowohl mobile Erfassung als auch direkte Datensicherung am Arbeitsplatz und in Prüfprotokollen. Eine feine Ablesung von 0,0001 unterstützt dokumentationspflichtige Messvorgänge, während die digitale Auslesung die Nachverfolgbarkeit im Prüfprozess erleichtert. Einsatzbereich, Zielgruppe und messbare Vorteile Konzipiert als Feldgerät, richtet sich das Instrument an Prüfpersonal in Feinmechanik, Kalibrierwerkstätten und Messtechnik‑Abteilungen, die kleine Innenmaße kontrollieren müssen. Die Eignung für Kaliber von 12,63 mm macht das Gerät zur praktischen Lösung, wenn enge Toleranzen erfüllt werden müssen. Durch die Kombination aus hoher Messgenauigkeit und direkter Datenausgabe wird der Prüfablauf beschleunigt und das Fehlerpotenzial bei der Protokollerstellung reduziert. Empfehlen Sie das Innen‑Feinmessgerät von Microtech Metrology jetzt über Metav Werkzeuge; bei Fragen erreichen Sie unsere technische Beratung per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 138126307 Marke: Microtech Metrology Bezeichnung: Innen-Feinmessgerät Daten Messbereich minimal: 12,6 mm Messbereich maximal: 12,66 mm Genauigkeit: 0,012 mm Ablesung: 0,0001 Messtiefe: 750 Besonderheiten Digitalanzeige: Touchscreen 1,54" Datenausgang: Wireless+USB (kabellose Übertragung und USB‑Schnittstelle) GTIN: 4061905452895 (Globale Artikelnummer) Typ: Feld eClass: 21170310 FAQ Wie genau misst das Innen-Feinmessgerät und ist es für Normprüfungen geeignet? Das Innen-Feinmessgerät von Microtech Metrology bietet eine Genauigkeit von ±0,012 mm und eine Ablesung von 0,0001, wodurch es sich für präzise Werkstatt‑ und Laborprüfungen eignet. Welche Schnittstellen stehen zur Datenübertragung zur Verfügung? Das Gerät unterstützt Wireless‑Datenübertragung sowie USB, sodass Messergebnisse mobil erfasst oder direkt am Prüfplatz gespeichert werden können. Für welche Messbereiche ist das Gerät ausgelegt? Der Messbereich reicht von 12,60 bis 12,66 mm; das Gerät ist damit speziell für feine Innenmessungen im Mikro‑Bereich ausgelegt. Ist das Instrument für den mobilen Einsatz konzipiert? Ja, als Feldgerät ist das Innen‑Feinmessgerät für den mobilen Einsatz entwickelt und erleichtert Messungen an schwer zugänglichen Bauteilen durch seine kompakte Bauform und die Messtiefe von 750. Welche Kennung hat das Produkt zur Bestellung? Die Artikelnummer für Bestellungen lautet 138126307; zusätzlich ist die GTIN 4061905452895 hinterlegt. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools

Nutzen Sie die Kombination aus hoher Genauigkeit und flexibler Datenübertragung für zuverlässige Innenmessungen; das Gerät bietet eine Ablesung von 0,0001 mm und eine Messgenauigkeit von 0,012 mm. Bestellen Sie das Messgerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Innen-Feinmessgerät Messuhr von Microtech Metrology Das Innen-Feinmessgerät ist ein digitales Innenmessinstrument mit Touchscreen, ausgelegt für präzise Messungen im Mikrobereich und für anspruchsvolle Innenmessaufgaben. Kompakter Messbereich 12,90–12,96 mm Ablesung 0,0001 mm für Feinanalyse Messgenauigkeit 0,012 mm industrietauglich Datenausgang Wireless + USB für einfache Integration Touchscreen 1,54" für intuitive Bedienung Präzision und Messumfang für Mikroteile Das Innen-Feinmessgerät gehört zur Mikroklasse und deckt mit einem Messbereich von 12,90–12,96 mm gezielt feinmechanische Anwendungen ab. Dank der Ablesung von 0,0001 mm lassen sich auch kleinste Toleranzen nachvollziehbar dokumentieren. Die angegebene Genauigkeit von 0,012 mm entspricht einem industrietauglichen Niveau für Innenmessungen an Kalibern, Bohrungen und engen Passungen. Durch die kompakte Bauform bleibt das Messgerät verwindungsarm und eignet sich für wiederkehrende Prüfabläufe in der Fertigung. Datenmanagement und Bedienkomfort für den Messalltag Der integrierte Touchscreen mit 1,54 Zoll ermöglicht eine klare Anzeige der Messwerte und eine schnelle Bedienung direkt am Gerät. Der kombinierte Datenausgang Wireless + USB sorgt für flexible Weitergabe an Prüfsoftware oder Messreihen im Labor; USB stellt eine direkte Kabelverbindung bereit, Wireless erleichtert die Erfassung ohne Kabelsalat. Diese Verbindungsmöglichkeiten reduzieren Übertragungsfehler und beschleunigen die Dokumentation, was insbesondere bei Serienprüfungen Zeit spart. Einsatzgebiet und Zielgruppe mit Praxisnutzen Dieses Messinstrument wurde für Werkstätten, Laboratorien und Feinmechaniker entwickelt, die Innenmessungen mit hoher Auflösung benötigen. Insbesondere Uhrmacher, Kalibrierstellen und Hersteller von Präzisionsbauteilen profitieren von der Kombination aus kleinem Messbereich und hoher Ablesbarkeit. Die Kompatibilität zu Kaliber 12,63 mm macht das Gerät zur passenden Wahl für Prüfaufgaben mit engsten Toleranzen. Robustheit, Bauart und Handhabung Die Rillen-Bauart unterstützt die sichere Führung beim Ermitteln von Innenmaßen; die Messtiefe von 750 mm erweitert die Einsatzmöglichkeiten bei tiefen Bohrungen oder speziellen Prüfaufbauten. Die digitale Anzeige und das robuste Design vereinfachen regelmäßige Messzyklen und verringern Bedienfehler. So entsteht ein messbarer Effizienzgewinn in der Qualitätssicherung durch schnellere Prüfzeiten und zuverlässige Daten. Für präzise Innenmessungen empfehlen wir das Microtech Innen-Feinmessgerät mit Wireless+USB; direkte Anfragen und Bestellungen nehmen Metav Werkzeuge gern entgegen – per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 138126327 Marke: Microtech Metrology Bezeichnung: Innen-Feinmessgerät Typ: Rille GTIN: 4061905452901 eClass: 21170310 Fakten Messbereich: 12,9–12,96 mm Messbereich (min): 12,9 mm Messbereich (max): 12,96 mm Messtiefe: 750 mm Genauigkeit: 0,012 mm Ablesung: 0,0001 mm Besonderheiten Digitales Display: Touchscreen 1,54" (Anzeige) Datenausgang: Wireless + USB (Datenübertragung) Geeignet für Kaliber 12,63 mm Kategorie: Messuhren Digital: digitales Messgerät Typ: Rille FAQ Wie genau misst das Innen-Feinmessgerät von Microtech Metrology? Das Innen-Feinmessgerät von Microtech Metrology bietet eine Messgenauigkeit von 0,012 mm und eine Ablesung von 0,0001 mm, ideal für präzise Innenmessungen an Kalibern und engen Passungen. Welche Schnittstellen stehen zur Datenübertragung zur Verfügung? Das Gerät unterstützt Wireless + USB für drahtlose Übertragung und kabelgebundene Datenweitergabe, sodass Messwerte direkt an Prüfsoftware oder Datenerfassungssysteme übermittelt werden können. Für welche Anwendungen ist dieses Messinstrument besonders geeignet? Einsatzgebiete sind Feinmechanik, Kalibrierarbeiten und Laborprüfungen, speziell dort, wo Innenmaße im Mikrometerbereich zuverlässig erfasst werden müssen. Ist das Innen-Feinmessgerät kompatibel mit bestehenden Kalibern? Ja, das Gerät ist geeignet für Kaliber 12,63 mm und lässt sich in Prüfabläufe mit entsprechenden Messaufnahmen integrieren. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools

Innen-Feinmessgerät Messuhr von Microtech Metrology Das Innen-Feinmessgerät von Microtech Metrology ist eine digitale Messuhr für präzise Innenmessungen an Bohrungen und Rillen mit hoher Messtiefe und moderner Datenanbindung Präzision 0,012 mm Genauigkeit Touchscreen 1,54" für schnelle Ablesung Wireless+USB Datenausgang für einfache Datenübertragung Messtiefe 750 mm für tiefe Innenmessungen Im Set: 2 Stück für parallele Messkampagnen Präzision auf kleinstem Raum für feinmechanische Anforderungen Das Innen-Feinmessgerät ist in die Klasse Mikro einzuordnen, da der Messbereich bei 12,6–12,96 mm liegt. Diese Einteilung steht für kompakte Bauform und hohe Steifigkeit bei kurzen Messschenkeln, ideal für feinmechanische Arbeiten, bei denen Wiederholgenauigkeit zählt. Mit einer angegebenen Genauigkeit von 0,012 mm lassen sich Toleranzen kontrolliert überwachen; das bedeutet, dass Abweichungen im mikrometergroßen Bereich erkennbar werden und Prüfprozesse dadurch planbar und reproduzierbar sind. Schnelle Auswertung und sichere Datenübertragung reduzieren Prozesszeit Die Anzeige erfolgt über einen Touchscreen 1,54", der schnelle Ablesung und komfortable Bedienung ermöglicht. Der kombinierte Wireless+USB Datenausgang sorgt dafür, dass Messergebnisse direkt in Datenerfassungssysteme übertragen oder lokal gespeichert werden können. Dieser digitale Workflow spart Zeit bei Dokumentation und Rückverfolgbarkeit und erleichtert die Übernahme in Prüfprotokolle und Qualitätsmanagement. Große Messtiefe für spezielle Innengeometrien Mit einer Messtiefe von 750 mm lassen sich auch tiefere Bohrungen und längere Hohlräume ohne zusätzliche Verlängerungen prüfen. Der Typ Feld und Rille unterstützt dabei stabile Auflage und wiederholbare Positionierung der Messschenkel, sodass einzelne Messungen weniger durch Handhabungsfehler beeinflusst werden. Die Lieferung als Satz mit 2 Stück ermöglicht parallele Kontrollen oder direkten Vergleich zwischen Referenz und Prüfling. Konzipiert für Anwender in Werkstatt und Qualitätssicherung Herstellerseitig richtet sich das Gerät an Feinmechanik, Werkzeugbau und Prüfplätze, die kleine Innenmaße mit hoher Präzision überwachen müssen. Die kompakte Bauweise zusammen mit digitaler Datenschnittstelle macht das Instrument zur sinnvollen Ergänzung moderner Messroutinen; insbesondere dort, wo Prüfergebnisse lückenlos erfasst und automatisiert ausgewertet werden sollen. Eine kurze Erläuterung: Die Genauigkeitsangabe gibt die charakteristische maximale Abweichung der Messung an und ist ein direktes Maß für die Zuverlässigkeit der Messergebnisse. Setzen Sie auf die Messtechnik von Microtech Metrology: Das Innen-Feinmessgerät bietet präzise, reproduzierbare Innenmessungen mit digitaler Anbindung — bei Fragen erreichen Sie Metav Werkzeuge per E‑Mail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 138126357 Marke: Microtech Metrology Typ: Feld und Rille GTIN: 4061905452918 Messbereich: 12,6-12,96 mm Digital: Ja Satz: Ja (2 Stück) Geeignet für Messschieber: Kaliber 12,63 mm Fakten Genauigkeit: 0,012 mm Messbereich Min: 12,6 mm Messbereich Max: 12,96 mm Messtiefe: 750 mm Digital Anzeige: 1,54 Zoll Stück pro Satz: 2 Besonderheiten Wireless+USB Datenausgang Touchscreen-Anzeige Set mit 2 Stück Typ Feld und Rille Geeignet für Kaliber 12,63 mm Digitales Messgerät FAQ Welche Messbereiche deckt das Innen-Feinmessgerät ab? Das Innen-Feinmessgerät von Microtech Metrology (Messuhr, SKU 138126357) deckt den Bereich 12,6–12,96 mm ab und ist damit für sehr präzise Innenmessungen an kleinen Bohrungen geeignet. Wie genau sind die Messwerte des Geräts? Die Genauigkeit beträgt 0,012 mm; das Innen-Feinmessgerät von Microtech Metrology liefert damit Messergebnisse mit hoher Zuverlässigkeit für feinmechanische Prüfungen. Wie werden Messergebnisse übertragen? Das Innen-Feinmessgerät bietet einen kombinierten Wireless+USB Datenausgang, sodass Daten drahtlos oder per Kabel in Datenerfassungsprogramme übernommen werden können. Wird das Messgerät als Einzelgerät oder als Set geliefert? Das Produkt wird als Satz geliefert; im Lieferumfang sind 2 Stück enthalten, was parallele Vergleiche oder direkte Gegenmessungen ermöglicht. Für welche Anwendungen ist das Gerät besonders geeignet? Das Innen-Feinmessgerät von Microtech Metrology eignet sich für Feinmechanik, Werkzeugbau und Qualitätssicherung, speziell für tiefe Innenmessungen und enge Bohrungen mit hoher Wiederholbarkeit. Hersteller: Microtech Metrology; Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools

Take advantage of the combination of high accuracy, wireless + USB data transfer and full ISO 17025 calibration with certificate for reliable measurements in precision workshops; order the three-point internal micrometre directly via Metav Werkzeuge or ask our consultants for tailored advice. Three‑Point Internal Micrometre – Digital internal measuring tool with wireless + USB and 1.5" colour touchscreen (Microtech Metrology) The Three‑Point Internal Micrometre is a compact digital instrument engineered for precise internal diameter measurement in small bores and precision components within the micro measurement category. *Digital display: 1.5" colour touchscreen *Wireless and USB data output *ISO 17025 calibrated with certificate *Measuring range 12–16 mm, 0.004 mm accuracy Accurate measurements for micro components Classified in the Micro category (suitable for very compact tasks), this instrument covers a measuring range of 12.0–16.0 mm, offering a practical reach for miniature assemblies and precision parts. The instrument combines a fine resolution of 0.0001 mm with a guaranteed accuracy of ±0.004 mm, which reduces measurement uncertainty and supports reproducible inspection results. Such precision is particularly valuable when inspecting small bores in sub‑assemblies where even slight deviations can affect fit and function. Traceable data capture and delivered calibration Designed for modern production environments, the micrometre provides wireless and USB connectivity for straightforward data transfer into inspection logs and SPC systems. The 1.5" colour touchscreen simplifies reading and setting adjustments on the shop floor, while the supplied setting ring ensures fast zeroing and repeatable reference points. The tool is supplied fully calibrated to ISO 17025 and includes a calibration certificate, enabling formal traceability and immediate use in processes that require accredited measurement results. Ergonomic handling that speeds up inspections The three‑point contact design centres measurement force, improving contact consistency inside bores and reducing operator‑induced variation. The compact format supports single‑hand operation in confined spaces and the intuitive touchscreen speeds routine checks, lowering cycle times and decreasing the likelihood of rework. The included setting ring and clear digital readout combine to make daily inspection routines both ergonomic and efficient. Integration into workshop quality routines With its digital outputs and compact form factor, the device integrates easily into existing inspection stations and handheld workflows. The substantial measuring depth of 230 mm provides versatility when accessing deeper bores or assemblies, while the three‑point mechanism ensures stable centring for reliable interior measurements. Together, these features support a consistent quality chain from initial inspection through to final acceptance. Contact Metav Werkzeuge in Emmerich for a suitability review or to request a quotation for this Microtech Metrology three‑point internal micrometre with ISO 17025 calibration; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 133701610 GTIN: 4061905074219 Manufacturer: Microtech Metrology ECLASS: 21170335 Facts Measuring range: 12.0–16.0 mm Resolution: 0.0001 mm Accuracy: ±0.004 mm Measuring depth: 230 mm Special features Digital colour 1.5" touchscreen Data output: Wireless and USB Included setting ring ISO 17025 calibration with certificate Three‑point internal measuring spindle FAQ What bore sizes can be inspected with this instrument? The Three‑Point Internal Micrometre is designed for bores in the 12.0–16.0 mm range and is classified in the micro category for compact internal measurements. Is the micrometre delivered calibrated for traceability? Yes, the instrument is supplied fully calibrated to ISO 17025 and includes a calibration certificate for immediate traceable use. How are measurement results transferred to a PC or inspection system? Measurement data can be transmitted via the micrometre’s wireless interface or exported using the USB connection for integration into inspection logs. What level of precision can be expected during routine checks? Routine measurements with the Three‑Point Internal Micrometre offer a resolution of 0.0001 mm and an accuracy of ±0.004 mm, suitable for high‑precision shopfloor inspections. Does the tool include accessories for initial setup? The micrometre is supplied with an inclusive setting ring to establish a reproducible zero reference and support repeatable measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of the combination of compact design, repeatable self‑centring measurement and wear‑resistant carbide faces to maintain consistent bore quality in small components. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Three‑point internal micrometer MS908.653 — self‑centring three‑point head, carbide measuring faces (Metav IndustryLine) A Three‑point internal micrometer MS908.653 engineered for precise measurement of blind bores in workshop and quality‑control environments. Self‑centring three‑point measuring head Carbide measuring faces for wear resistance Precise range 12–16 mm with 0.004 mm accuracy Compact 80 mm body length for confined spaces Accurate measurements in confined bores The three‑point geometry provides a self‑centring effect that stabilises the measuring axis in blind holes, reducing eccentricity and improving repeatability. With a declared accuracy of 0.004 mm and a vernier reading increment of 0.005 mm, this analogue instrument delivers the fine mechanical resolution expected in micro‑component inspection. The design minimises operator variation by ensuring the measuring anvils expand symmetrically, which translates into faster decision‑making during incoming inspection or in‑process checks. Small format, specialist capability Classified in the Micro category (measuring range 12–16 mm), the tool combines a short 80 mm body length with a compact head that is easy to manoeuvre inside tight bores. The carbide measuring faces resist wear during repetitive use, extending the interval between maintenance cycles and preserving measurement integrity. An adjustment ring (size 16) allows repeatable pre‑settings for batch measurements, so set‑ups for small series or precision assemblies remain consistent without excessive rework. Built for blind‑hole tasks and straightforward handling Designed specifically for blind‑hole measurement, the three‑point micrometer eliminates the need for improvised measuring aids. Its analogue, non‑electronic construction favours robustness in workshop conditions and simplifies routine maintenance compared with electronic gauges. The combination of mechanical simplicity and the self‑centring head reduces measurement time and supports reliable dimensional control of bores used in bearings, housings and valve seats. Workshop integration and supplier confidence Metav IndustryLine supplies a practical measuring solution that fits established inspection routines and supports traceable quality processes. The instrument’s proven geometry and durable contact faces make it suitable for precision toolrooms and production lines where compact accuracy is required. For specification matching, calibration options and integration into existing quality workflows, Metav Werkzeuge acts as a single, reliable partner with rapid technical guidance and supply across Europe. Contact Metav Werkzeuge today for tailored technical advice and reliable supply of the MS908.653 three‑point internal micrometer via Metav Werkzeuge GmbH in Emmerich Technical data Article number: MS908.653 Brand: Metav IndustryLine Category: Messschrauben Facts Measuring range: 12.0–16.0 mm Measuring range (min): 12 mm Measuring range (max): 16 mm Body length: 80 mm Accuracy: 0.004 mm Reading increment: 0.005 mm Adjustment ring: 16 Special features Self‑centring three‑point head Carbide measuring faces Designed for blind‑hole measurement Analog/vernier design Compact micro‑class instrument FAQ What types of bores is this instrument intended for? This three‑point internal micrometer MS908.653 is designed for precise measurement of blind bores and internal diameters within its 12–16 mm range. How precise is the measurement and what resolution is readable? The instrument offers an accuracy of 0.004 mm with a vernier reading increment of 0.005 mm, providing fine mechanical resolution suitable for micro‑component inspection. Are the measuring faces durable for repetitive workshop use? Yes, the micrometer is fitted with carbide measuring faces to increase wear resistance during repetitive measurements and to maintain dimensional integrity. Is the micrometer suitable for small‑batch production set‑ups? Its compact 80 mm body and adjustment ring (size 16) enable repeatable pre‑settings, making the MS908.653 well suited to small series and frequent set‑ups. Can calibration or certification be arranged for this instrument? Calibration options and certificates can be arranged through Metav Werkzeuge; contact the supplier for available services and lead times. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from self‑centring three‑point measurement, carbide measuring faces and a 0.005 mm vernier resolution to perform reliable blind‑hole checks in the micro range; order this precision set directly via Metav Werkzeuge or consult our experts for application guidance. Three‑point internal micrometer MS908.672 — 12–20 mm range, 0.005 mm vernier (Metav IndustryLine) The Three‑point internal micrometer MS908.672 is an analogue, self‑centring gauge designed for accurate measurement of blind bores within the micro range, where compact size and repeatable centring are essential. Self‑centring three‑point measurement Carbide measuring faces for wear resistance Resolution 0..005 mm for fine readings Precision where small tolerances matter This instrument is tailored to the micro range (12–20 mm), a segment where stiffness and compactness determine repeatability. The three‑point geometry automatically centres in blind bores, reducing operator alignment error and speeding up routine checks. With an analogue vernier reading at 0.005 mm, the gauge enables fine discrimination that supports tight tolerances without the complexity of digital systems. The compact format is especially useful in repair benches, toolrooms and micro‑assembly stations where space and manoeuvrability are constraints. Durable construction for frequent shop use Key contact surfaces are fitted with carbide measuring faces, providing excellent resistance to wear and abrasion and maintaining measurement integrity over many cycles. The instrument’s analogue vernier construction offers a robust, low‑maintenance solution for production environments. An adjustment ring (16) allows controlled settling of the measuring head, while the solid mechanical design minimises play and drift during repeated inside measurements. Practical set composition and extendibility Supplied as a set of two, the micrometers offer complementary coverage for daily shop workflows and quick changeover between inspection tasks. Extensions of 150 mm are available for deeper blind bore access, enabling the same measuring principle to be applied where reach is required. The compact set format reduces tool change time and simplifies storage for inspection kits on the shop floor. Application suitability and operator benefit Designed specifically for blind‑hole measurement, the gauge removes the need for complex adapters in many common tasks. The self‑centring action reduces the influence of operator alignment, while the fine vernier graduation supports confident pass/fail assessments in first‑operation inspection and incoming goods control. The analogue nature makes it straightforward to interpret results and integrate the device into established quality routines without training overhead. For tailored technical advice or to reserve this two‑piece precision set, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: MS908.672 Type: Three‑point internal micrometer Brand: Metav IndustryLine Designation: Three‑point internal micrometer Measurements Measuring range: 12.0–20.0 mm Resolution (reading): 0.005 mm Adjustment ring: 16 Set quantity: 2 pieces Special features Self‑centring three‑point system Carbide measuring faces Analogue vernier scale Suitable for blind‑hole measurement Extensions: 150 mm FAQ What measuring range does the instrument cover? The Three‑point internal micrometer MS908.672 covers a measuring range of 12.0–20.0 mm, placing it in the micro range suitable for fine mechanical work. Is this gauge suitable for blind‑hole inspection? Yes — the self‑centring three‑point design is specifically intended for blind‑hole (Sackloch) measurement and ensures reliable centring in such applications. How fine is the reading and how is it read? The analogue vernier provides a reading resolution of 0.005 mm; readings are taken from the vernier scale, offering precise manual measurement without electronics. Are the measuring faces robust enough for regular use? Measuring faces are made of carbide, giving the MS908.672 high wear resistance and long service life even under frequent shop use. Does the delivery include extensions and how many pieces are supplied? The delivered set comprises two instruments and includes extensions of 150 mm to extend reach into deeper blind bores. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of high microscopic accuracy and modern data connectivity to speed up inspection routines while keeping simple, reproducible handling. The compact design and adjustable display support fast sampling of small parts; order the gauge directly via Metav Werkzeuge or consult our specialists for integration advice. Dial Gauge 120139137R by Microtech Metrology — Digital gauge with 2.4" colour touchscreen and Wireless+USB output Dial Gauge 120139137R is a compact digital measuring indicator designed for fine‑part inspection and workshop quality control, offering a small measuring range and ergonomic display mounting for repeatable results High resolution 0.002 mm accuracy 2.4" colour touchscreen display Wireless and USB data output Measuring range 0–12.5 mm Adjustable tablet for ergonomic positioning Precision where small tolerances matter This compact indicator offers 0.002 mm accuracy with a fine display resolution of 0.0001 mm, making it suitable for exacting inspection tasks on miniature components. Classified as a micro-range instrument (measuring range 0–12.5 mm), the device balances reach and stiffness to reduce measurement uncertainty on tiny features. The controlled measuring force 0.6–1 N helps to avoid elastic deflection of delicate parts while preserving repeatability. Such technical performance shortens decision cycles in production control and reduces scrap rates by catching deviations earlier. Faster data capture and traceable results Equipped with a 2.4" colour touchscreen and Wireless+USB interfaces, the gauge simplifies transfer of readings into statistical or inspection systems and reduces manual transcription errors. The digital indicator supports consistent logging of measured values, enabling streamlined batch documentation and faster reporting in quality workflows. Built for connection with existing inspection software, the device turns manual checks into auditable datasets without complex retrofitting, improving throughput and traceability in typical workshop routines. Ergonomic handling for everyday workshop use An adjustable tablet mount allows comfortable viewing angles during repetitive measurements and lowers operator fatigue, which in turn helps maintain measurement integrity across long shifts. The compact form factor and gentle contact force make the indicator especially useful in precision engineering, toolmaking and laboratory setups where small components are measured often. The result is a tool that merges fine measurement capability with practical handling, supporting rapid inspection of components without sacrificing control. Contact Metav Werkzeuge for application matching and system integration advice on the Microtech Metrology dial gauge 120139137R, and request our measurement compatibility checklist to ensure seamless acceptance into existing processes Technical Data Article number: 120139137R GTIN: 4061905453335 Manufacturer: Microtech Metrology Facts Measuring range: 0–12.5 mm Accuracy: 0.002 mm Display resolution: 0.0001 mm Measuring force: 0.6–1 N Display size: 2.4" colour touchscreen Special features Digital instrument Data output: Wireless+USB Compact, micro-range indicator Adjustable tablet for ergonomic positioning FAQ What measurement range does this gauge cover? The dial gauge 120139137R from Microtech Metrology covers a measuring range of 0–12.5 mm, making it a micro‑range instrument for fine components. How precise are the readings from this indicator? Readings are specified to an accuracy of 0.002 mm with a display resolution of 0.0001 mm, suitable for workshop quality control and precision engineering. Which data connections are available for automated recording? The device provides Wireless and USB data output for transfer of measured values into inspection software or data loggers. Is the measuring force adjustable or fixed? The instrument operates with a measuring force in the range of 0.6–1 N, designed to ensure consistent contact without deforming small workpieces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of the combination of precise measurement, flexible data output and straightforward PLC integration to streamline inspection routines; the Microtech Metrology dial gauge delivers repeatable readings with a compact footprint — order the instrument directly via Metav Werkzeuge or consult the Metav team for system integration. Microtech Metrology Dial Gauge — digital indicator with Modbus PLC connection and 2.4" touchscreen A Microtech Metrology dial gauge built as a compact digital indicator for high-resolution displacement measurement and direct integration into PLC systems and data-collection setups Modbus PLC connection and wireless data 2.4-inch colour touchscreen display High accuracy: 0.002 mm Compact 0–12.5 mm measuring range Reliable precision for routine inspection and quality control The instrument provides 0.002 mm accuracy with a fine resolution of 0.0001 mm, making it suitable for high-precision checks on small components and assemblies. The compact 0–12.5 mm measuring range covers typical fine‑mechanical tasks while the specified measuring force of 0.6–1 N maintains consistent contact pressure, reducing variability between readings. These technical characteristics translate into reliable pass/fail decisions and shortened inspection times, supporting repeatable quality control without the overhead of larger metrology systems. Integration that reduces manual steps and speeds data flow Equipped with Modbus for PLC connectivity and dual wireless + USB data outputs, the indicator allows direct transmission of measurement values to machine control or data-logging systems. The built-in microcomputer handles signal processing locally, so measurement results are presented immediately on the 2.4" colour touchscreen and can be forwarded to production databases without intermediary conversion. This direct data path decreases transcription errors and facilitates automated traceability, offering a clear efficiency gain in production environments that demand documented results. Practical design for everyday workshop and laboratory use The device combines a compact, serviceable form factor with an intuitive touchscreen interface that simplifies setup and reading interpretation. The digital indicator’s construction supports frequent handling in both bench‑top and in‑process checks, while the display’s clarity improves operator confidence and reduces training time. Supplied by a trusted metrology brand and distributed through Metav Werkzeuge’s European quality filter, this solution brings professional measurement performance to workshops that require dependable, easy-to-integrate instruments. Contact Metav Werkzeuge in Emmerich for advice on PLC integration, delivery options and to source Microtech Metrology dial gauges for immediate use in production. Technical Data Article number: 120139137M GTIN: 4061905453397 Manufacturer: Microtech Metrology Facts Measuring range: 0–12.5 mm Accuracy: 0.002 mm Resolution (display/readout): 0.0001 mm Measuring force: 0.6–1 N Display: 2.4" colour touchscreen Data output: Wireless, USB, Modbus PLC Special features Integrated microcomputer for local processing Designed for direct PLC integration via Modbus Compact digital indicator for precision tasks Suitable for bench and in-process measurement Category: dial gauge / digital indicator FAQ What measurement range does the dial gauge cover? The dial gauge covers a 0–12.5 mm range, suitable for fine mechanical inspections and small-part measurement tasks. How accurate is the instrument for quality checks? The instrument achieves 0.002 mm accuracy with a readout resolution of 0.0001 mm, providing reliable precision for routine quality control. Which data interfaces are available for automation? Measurement values can be exported via Modbus for PLCs and transmitted over wireless or USB connections for data logging and process integration. Is the display suitable for shop-floor conditions? Yes; the 2.4" colour touchscreen offers clear, legible readings and straightforward operation, reducing operator errors and setup time. Can the measurement values be sent directly to a control system? Yes. The built-in Modbus connection and the device’s microcomputer enable direct transfer of values to control systems or databases without extra converters. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of precise measurement, a rotatable readout and robust protection to keep inspection routines efficient and reproducible; the combination of 0.001 mm resolution, an absolute measurement system and IP54 ingress protection ensures reliable results across workshop and laboratory tasks. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. M301.035 digital dial indicator — 12.7 mm range, 0.001 mm resolution The M301.035 is a compact digital indicator designed for contact measurement tasks in quality control and precision assembly, offering an absolute measuring system and a rotatable display for flexible mounting and easy reading Absolute measurement system, 0.001 mm resolution 12.7 mm measuring range 330° rotatable display for flexible reading IP54 protection against dust and splashes Precision that reduces rework and secures tolerances The gauge delivers an outstanding combination of 0.001 mm display resolution and an accuracy of 0.002 mm, helping to detect small deviations before they escalate into costly production faults. The excellent repeatability of 0.004 mm provides stable results across repeated checks, which streamlines process control and supports consistent part quality. The absolute measuring system removes ambiguity after power cycles, so reference points remain intact and measurement workflows become faster and less error-prone. Readability and durability for everyday shop use A 330° rotatable display and a clear digital readout simplify measurement in confined fixtures and awkward orientations, while the IP54 rating protects the electronics from dust and coolant splashes commonly found in machine shops. The instrument runs from a 3 V supply and features a scale with a glass rail for improved scanning stability, reducing measurement jitter. Supplied in a transport case for safe handling, the gauge combines ergonomic operation with the robustness required for routine inspection and bench use. Connectivity and functions that support traceable workflows The unit offers a practical keypad layout (ON/OFF, ORIGIN, 0/ABS, PRESET, TOL, mm/inch and +/-) and a data output RB 6 for external data capture, enabling straightforward logging of measured values into inspection records. With a measuring force greater than 1.5 N and a compact mass of 0.29 kg, the indicator balances gentle contact with mechanical stability. The 12.7 mm travel is ideal for small to medium measurement tasks, providing enough range for many workshop applications while retaining fine control and stiffness. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine M301.035 digital indicator and to arrange supply or technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M301.035 GTIN: 4054469158389 Label: Digital indicator, 12.7 x 0.001 mm, Absolute system, 330° rotatable, IP54 Manufacturer: Metav IndustryLine Facts Measuring range: 0–12.7 mm Resolution: 0.001 mm Accuracy: 0.002 mm Repeatability: 0.004 mm Measuring force: >1.5 N Weight: 0.29 kg Protection class: IP54 Power supply: 3 V Display rotation: 330° Special features Absolute measurement system Digital display with ON/OFF, ORIGIN, 0/ABS, PRESET, TOL, mm/inch, +/- keys Data output: RB 6 Scale with glass rail for improved scanning Delivered in transport case FAQ What is the measuring range and resolution of the indicator? The indicator has a 12.7 mm measuring range and a display resolution of 0.001 mm, suitable for fine workshop and quality inspection tasks. Is the display protected against coolant and dust? Yes, the instrument is rated IP54, so the electronics are protected against limited dust ingress and splashing liquids typical in machining environments. Can measurement data be exported for documentation? A data output RB 6 is provided for external data capture, allowing measured values from the gauge to be recorded in inspection logs or data collection systems. Does the instrument require recalibration on delivery? The gauge is supplied calibrated according to standard factory procedures and includes a transport case for secure delivery; for traceable certification please enquire about available calibration services if needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Precise, robust and simple to integrate: the digital dial indicator combines 0.01 mm resolution, an absolute measuring system and a 330° rotatable display for straightforward inspection tasks; delivered in a protective transport case for safe handling. Order the digital dial indicator M301.031 directly via Metav Werkzeuge or ask our consultants if needed. M301.031 — Digital dial indicator, 12.7 mm range, 0.01 mm resolution (Metav IndustryLine) The M301.031 digital dial indicator is a compact measuring instrument for accurate short-range checks in workshop inspection and machining set-ups, featuring an absolute system and a rotatable display for ergonomic reading. Resolution 0.01 mm Absolute measuring system Display rotatable 0–330° IP54 protection for workshop use Precision where it matters: consistent short-range measurement The indicator delivers a measuring range of 12.7 mm with a fine resolution of 0.01 mm, making it suitable for detailed measurement tasks and repeat checks. Its repeatability of 0.005 mm ensures that successive readings stay consistent within narrow tolerances, which is essential for quality control or tool setting. The integrated absolute measuring system prevents datum loss after power cycles, so reference points remain stable between jobs. Easy integration and reliable data transfer Designed for straightforward integration into inspection routines, the instrument offers a clear digital readout with functions such as ON/OFF, ORIGIN, 0/ABS, PRESET, TOL and mm/inch switching. A dedicated data output (RB 6) facilitates connection to data loggers or inspection software, enabling documentation without manual transcription. The compact build and low mass support quick fixture mounting and minimal inertia during probing. Ergonomic operation and workshop resilience A 330° rotatable display provides flexible viewing angles, reducing operator strain in confined set-ups and speeding up throughput. The scale uses a glass slide for accurate scanning and a measuring force above 1.5 N for stable contact. With an IP54 rating and a protective transport case included, the instrument tolerates typical workshop environments and is safeguarded during transit or storage. Practical benefit: more uptime, fewer errors By combining a robust enclosure, a rotatable, easy-to-read display and dependable repeatability, this indicator reduces measurement-related interruptions and rework. The compact form factor and clear digital functions accelerate routine checks and calibration tasks; this supports faster decision-making on the shop floor and steadier production flow without compromising measurement integrity. For tailored advice on integrating the Metav IndustryLine M301.031 into existing quality workflows or to request a quotation, contact Metav Werkzeuge in Emmerich for expert assistance and reliable delivery. Technical data Article number: M301.031 GTIN: 4054469158358 ECLASS: 21170308 ETIM: EC003591 Weight: 0.29 kg Protection class: IP54 Measuring range: 0–12.7 mm Numbers / Core technical data Resolution: 0.01 mm Repeatability: 0.005 mm Measuring force: >1.5 N Measuring system: Absolute, 3 V Display rotation: 0–330° Data output: RB 6 Special features / Versions Digital functions: ON/OFF, ORIGIN, 0/ABS, PRESET, TOL, mm/inch, +/− Scale with glass slide for accurate scanning Reversible measuring direction possible Delivered in a protective transport case Designed for workshop inspection and tool setting FAQ How accurate is the M301.031 for repeat measurements? The M301.031 offers a repeatability of 0.005 mm, which supports reliable successive readings suitable for routine inspection and tool setup. Can the indicator display be read in different orientations? Yes, the instrument features a 330° rotatable display, allowing the screen to be turned for optimal readability in confined or awkward measuring positions. Is the M301.031 suitable for data logging with inspection systems? The gauge includes a data output (RB 6) for connection to compatible data loggers or inspection software to record measurements without manual entry. What environmental protection does the indicator provide? With an IP54 rating and a protective transport case included, the M301.031 is protected against dust ingress and splashing water typical in workshop settings. Which functions support quick setup and tolerance checks? Built-in functions such as 0/ABS, PRESET and TOL facilitate fast zeroing, presetting of reference values and basic tolerance monitoring during routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact measuring instrument that pairs high repeatability with intuitive operation and secure transport: the inductive digital indicator delivers 0.01 mm accuracy with a fine 0.001 mm resolution, and is supplied in a protective case for safe handling. Order the instrument directly via Metav Werkzeuge or ask the consultants for integration advice. Digital dial indicator M301.081 — Inductive, 12.7 mm range, 0.01 mm accuracy (Metav IndustryLine) A Digital dial indicator M301.081 engineered for precise displacement measurement in workshop inspection and machine setup tasks, combining a robust inductive sensing system with a bar‑graph display for rapid visual feedback. Inductive measuring system, 12.7 mm range 0.01 mm accuracy, 0.001 mm resolution mm/inch, PRESET, TOL and DATA functions RB 7 data output and bar‑graph display Reliable precision for repeatable inspection results The inductive measuring system converts lateral probe travel into stable electronic values, avoiding the mechanical wear and backlash common to contact‑based gauges. With a measuring span of 12.7 mm, an indicated accuracy of 0.01 mm and a resolution of 0.001 mm, the instrument is suited to routine quality control and setup operations where consistent results matter. The specified repeatability of 0.004 mm supports reproducible checks on small components and fixtures; this means fewer rechecks and a more predictable inspection flow, which improves throughput without sacrificing measurement integrity. Faster checks through clear indication and data transfer A clear 56 mm dial and an illuminated digital readout with an integrated bar‑graph display provide immediate visual confirmation of deviations, while the multi‑function keypad offers mm/inch switching, PRESET, TOL and DATA commands for flexible use. The built‑in RB 7 data output enables direct capture of readings into a measurement system or SPC software, reducing manual entry errors and simplifying traceability. These features speed up batch inspections and make the instrument practical for both bench work and integration into semi‑automated test rigs. Designed for workshop use and secure handling Weighing approximately 0.3 kg, the instrument is light enough for handheld checks yet robust for everyday shop use. The inductive probe and sealed electronics tolerate standard workshop conditions better than purely mechanical indicators. Delivery includes a protective case to keep the instrument safe during transport and storage, preserving calibration and ensuring the tool is ready whenever it is needed. The combination of dependable sensing, intuitive controls and secure packaging makes it a pragmatic choice for production environments. Contact Metav Werkzeuge for tailored measurement advice and request the Metav IndustryLine digital dial indicator M301.081 with RB 7 output to streamline your inspection processes Technical data Article number: M301.081 GTIN: 4054469113692 eClass: 21170308 ETIM: EC003591 Brand: Metav IndustryLine Facts Measuring range: 0–12.7 mm Display resolution: 0.001 mm Accuracy: 0.01 mm Repeatability: 0.004 mm Dial diameter: 56 mm Weight: 0.3 kg Special features Inductive measuring system Digital display with bar‑graph indicator mm/inch, 0/OFF, PRESET, TOL and DATA keys Data output: RB 7 Supplied in protective case Digital instrument (electronic display) FAQ How large is the measuring span of this indicator and what is it best used for? The indicator offers a measuring span of 12.7 mm and is best suited for displacement checks, fixture setup and routine quality control where compact, repeatable measurements are required. Can readings be recorded automatically from the instrument? Yes, the instrument provides a data output via RB 7 so readings can be captured by inspection software or data loggers for direct processing. What level of repeatability and resolution can be expected? The instrument delivers a resolution of 0.001 mm and a repeatability of 0.004 mm, supporting consistent results across repeated measurements. Is the unit ready for use and how is it protected during transport? The Metav IndustryLine digital dial indicator is supplied in a protective case to ensure safe transport and storage, helping to maintain measurement reliability. Which display and control functions assist fast inspection routines? Integrated features such as the bar‑graph display, mm/inch switching, PRESET and TOL functions speed up checks and reduce interpretation time during inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Innen-Feinmessgerät von Microtech Metrology Das Innen-Feinmessgerät ist ein digitales Innenmessgerät für präzise Innenmessungen im Kaliberbereich und für anspruchsvolle Werkstatt‑ und Prüfaufgaben. Innen-Feinmessgerät von Microtech Metrology Messgenauigkeit ±0,015 mm für verlässliche Ergebnisse Color 1,54" Touchscreen für klare Ablesung Wireless + USB Datenübertragung für Prozessintegration Präzision und Messbereich für wiederholbare Kontrolle Das Innen-Feinmessgerät bietet einen spezialisierten Messbereich von 119,3–120,7 mm und eine deklarierte Messgenauigkeit von ±0,015 mm. Diese Kombination macht das Werkzeug zur idealen Wahl, wenn es auf reproduzierbare Innenmaße ankommt. Da der Messbereich in die Kategorie Standard fällt, profitieren Anwender von einem guten Verhältnis aus Reichweite und Steifigkeit, das typische Werkstatt‑ und Laboraufgaben zuverlässig abdeckt. Ablesbarkeit und Datenerfassung für effiziente Prüfprozesse Die Color‑Anzeige mit 1,54 Zoll Touchscreen ermöglicht eine schnelle und ergonomische Ablesung; parallele analoge Anzeige sorgt für bewährte Kontrolle. Für die Datenerfassung stehen Wireless und USB zur Verfügung, sodass Messergebnisse einfach in Prüfprotokolle oder Messsoftware übernommen werden können. Dieser Datenfluss reduziert manuelle Übertragungsfehler und erhöht die Durchsatzrate in der Qualitätskontrolle. Einsatzgebiete und Zielgruppen mit konkretem Nutzen Das Gerät ist speziell geeignet für Kaliber‑Prüfungen rund um 120 mm und für Anwendungen, in denen enge Toleranzen gefragt sind. Zielgruppen sind Instandhaltung, Prüfplätze und Werkstätten, die Innenmaße an Bauteilen, Rohren oder Aufnahmen dokumentieren müssen. Durch die kompakte Bauform bleibt das Werkzeug handhabbar, während die präzise Mechanik die Messunsicherheit minimiert. Zubehör, Reichweite und Handhabung im Alltag Zum Lieferumfang gehören drei Lünetteinsätze, die den Einsatz an unterschiedlichen Innenkonturen erleichtern. Die angegebene Messtiefe von 2000 mm unterstützt Messungen auch in tieferen Bohrungen oder langen Hohlräumen. Die Kombination aus mechanischer Robustheit und digitaler Schnittstelle ermöglicht eine schnelle Einbindung in vorhandene Prüfabläufe und verringert Stillstandszeiten bei der Bauteilprüfung. Profitieren Sie von der präzisen Messführung des Innen-Feinmessgeräts von Microtech Metrology und fordern Sie technische Beratung bei Metav Werkzeuge an – per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Technische Daten Artikelnummer: 138012007M Marke: Microtech Metrology GTIN: 4061905045493 Fakten Messbereich: 119,3–120,7 mm Messgenauigkeit: ±0,015 mm Ablesung: 0,0001 Messtiefe: 2000 mm Besonderheiten Digitalanzeige: Color 1,54" Touchscreen Datenausgang: Wireless + USB (kabellose und kabelgebundene Übertragung) Analog: Nonius vorhanden Digital: Digitale Anzeige vorhanden Zubehör: 3x Lünette Geeignet für: Kaliber 120 mm FAQ Wie genau misst das Gerät? Das Innen-Feinmessgerät von Microtech Metrology (SKU 138012007M) erreicht eine Messgenauigkeit von ±0,015 mm und eine Ablesung bis 0,0001, wodurch es für präzise Prüfaufgaben geeignet ist. Für welche Messaufgaben ist das Gerät ausgelegt? Das Innen-Feinmessgerät eignet sich besonders für Innenmessungen im Bereich 119,3–120,7 mm und für Prüfaufgaben, die wiederholbare, enge Toleranzen erfordern. Wie werden die Messwerte übertragen? Messwerte können über Wireless oder über USB ausgegeben werden; die Color‑Anzeige mit Touchscreen erleichtert die lokale Auswertung vor Ort. Welches Zubehör wird mitgeliefert? Zum Lieferumfang des Innen-Feinmessgeräts gehören drei Lünetteinsätze, die die Anpassung an verschiedene Innenkonturen ermöglichen. Ist das Gerät für den Einsatz in der Serienfertigung geeignet? Ja, das Innen-Feinmessgerät von Microtech Metrology ist durch die digitale Schnittstellen und die robuste Mechanik für Prüfplätze und wiederkehrende Messabläufe in der Produktion einsetzbar. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Reliable laboratory weighing with 0.001 g readability and a 620 g capacity delivers precise, repeatable results for demanding workflows; the robust tuning-fork weighing system enables fast stabilisation and low drift. Order the KERN MPNS.600-3 directly via Metav Werkzeuge or contact our consultants for tailored advice and delivery from Emmerich. MPNS.600-3 precision balance by KERN — 620 g range, 0.001 g readability The MPNS.600-3 is a precision laboratory balance with a robust tuning-fork weighing system, designed for accurate weighing and piece counting in research and quality-control environments. 0.001 g readability 620 g maximum capacity Tuning-fork weighing system Stainless steel pan 140 mm Faster, measurable confidence in every measurement The instrument combines a high readability of 0.001 g with reproducibility 0.001 g, giving a quantifiable basis for process decisions and documentation. Because the balance uses a tuning-fork weighing system, stabilisation times are reduced and measurement noise is minimised, which translates into more samples processed per shift and fewer repeated cycles. Technical values such as linearity ±0.004 g and a clearly legible LCD with a 16.5 mm digit height support traceable procedures and easy visual verification of results. Reliable results that support quality workflows Built for routine laboratory use, the balance offers a stainless steel weighing pan with a 140 mm diameter that withstands cleaning and chemical exposure typical in labs. The unit’s reproducibility and low linearity error reduce uncertainty in weighing results, which assists in meeting internal QA thresholds and external audit requirements. Operating limits of 5 °C – 40 °C and up to 80% relative humidity define the environmental range where the instrument maintains specified performance, helping to plan placement and ambient control in production or testing areas. Practical connectivity and handling for everyday use Weighting is displayed on an easy-to-read LCD and the instrument is powered by a supplied plug-in adaptor with country-specific plugs (CH, EURO, UK, US), enabling rapid installation across international sites. With compact dimensions of 196 × 293 × 266 mm and a net weight of 2.09 kg, the unit is transportable between benches or workstations without complex mounting. The balance also supports reliable piece-counting workflows, with minimum part weights for laboratory counting down to 1 mg and standard counting from 10 mg, offering versatility for component inspection and procurement verification. For personalised guidance on integrating KERN precision balances into your workflow, contact Metav Werkzeuge in Emmerich for expert consultation and dependable supply — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data Article number: MPNS.600-3 SKU: MPNS.600-3 Manufacturer: KERN GTIN: 4045761183995 Customs tariff number: 90160010 Origin country: CN Facts Readability: 0.001 g Maximum weighing range: 620 g Reproducibility: 0.001 g Linearity: ± 0.004 g Display digit height: 16.5 mm Weighing pan diameter: 140 mm Minimum piece weight (lab counting): 1 mg Minimum piece weight (standard counting): 10 mg Operating temperature: 5 °C – 40 °C Max ambient humidity: 80% Power input: 220 V – 240 V AC, 50 Hz Net weight: 2.09 kg Dimensions (W × D × H): 196 × 293 × 266 mm Special features Weighing system: tuning-fork Weighing pan material: stainless steel Display type: LCD Power supply type: plug-in adaptor Included adaptors: CH, EURO, UK, US Category: laboratory balance FAQ What is the smallest readable increment and how reliable is it? The balance offers a readability of 0.001 g and reproducibility of 0.001 g, which supports precise measurements and consistent repeatability for laboratory tasks with the MPNS.600-3. Can this balance be used for piece counting of very small components? Yes, piece counting is supported; the MPNS.600-3 has a minimum piece weight for laboratory counting of 1 mg and typical counting from 10 mg, making it suitable for small-component inventory checks and inspection. Which power options are included for international use? A plug-in power adaptor is supplied with country-specific plugs for CH, EURO, UK and US, allowing immediate use in different regions without additional accessories. What environmental conditions are required for accurate results? Stable operation is specified for 5 °C – 40 °C and up to 80% relative humidity; keeping the balance within these limits helps maintain the stated linearity and reproducibility. Manufacturer: KERN — Origin: China; Supplier contact: Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271