Wissenswertes über Messwerkzeuge

Compact, wear-resistant marking performance from a hardened tip and a slim shank ensures repeatable results in routine workshop marking; the HSS construction and ø 5 x 20 mm profile combine durability with easy mounting. Order the replacement part directly via Metav Werkzeuge or contact the consultants for application advice. Scribing Needle M240.151.A1 – HSS, ø 5 x 20 mm (Metav IndustryLine) A scribing needle M240.151.A1 designed as a hardened high-speed steel marking tip for reliable metal scribing and simple integration into compatible holders. Durable HSS marking tip Precise ø 5 x 20 mm shank For 240.151-compatible holders Marking accuracy that stays consistent The hardened HSS tip delivers a reliable edge geometry that maintains sharpness under frequent use, reducing the need for early replacement. This means clearer centre lines and reference marks on metal components, which supports reproducible setup and faster downstream processing. The compact ø 5 x 20 mm format keeps the mass low and the centre of gravity close to the holder, improving handling and minimising unintentional deflection during scribing. Robust design for everyday workshop use A solid shank diameter of 5 mm with a 20 mm engagement length provides a stable clamping zone and simple fitment into standard holders. The high-speed steel composition balances toughness and hardness for marking a range of ferrous materials while resisting chipping in normal shop conditions. The compact construction makes replacement straightforward, so production downtime is reduced and toolroom logistics remain efficient. Easy identification and traceability for parts management Small weight and clear identifiers simplify inventory handling: the article is listed under SKU M240.151.A1 and GTIN is available for procurement systems. The modest form factor keeps stores tidy and allows quick swaps on marking fixtures, supporting lean workshop routines. Documentation and image resources are provided for rapid verification before installation, helping to maintain process consistency. For reliable, workshop-grade marking choose Metav IndustryLine’s hardened HSS scribing needle and contact Metav Werkzeuge for personalised advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M240.151.A1 GTIN: 4061905053672 Label: Reißnadel für 240.151 Ø 5 x 20 mm, HSS Facts Diameter: 5 mm Length: 20 mm Weight: 0.01 kg Special features Material: HSS (high-speed steel) Brand: Metav IndustryLine Intended for holder 240.151 Image available FAQ What material is the marking tip made from? The tip is made from HSS (high-speed steel), giving the scribing needle good wear resistance and toughness for routine shop marking. Which holder is compatible with this needle? The needle is intended for use with holders compatible with the 240.151 series; the part is sold under SKU M240.151.A1. How does the ø 5 x 20 mm size affect handling? The ø 5 x 20 mm shank provides a compact, stiff clamping section that improves stability and reduces deflection during marking. Is product identification available for procurement systems? Yes, the item has a GTIN (4061905053672) and the catalog article number M240.151.A1 for straightforward ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Measurements up to 0mm are no problem with digital Video insepction endoscope. The measured values can be read out quickly and easily via the digital display. The so-called monobloc, which is the vernier, is made from one piece. TheCalip Video insepction endoscope is ideal for a 4-fold measurement. This means that four different measurements can be carried out with this measuring tool. Outside, inside, depth and step measurements.Available in the following versions: - Suitable for: 0 schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im BauwesenTechnical data and further information about Metav IndustryLine caliper Video insepction endoscopeManufacturer: Metav IndustryLineModel: Video insepction endoscopeRange: 0mm - 0mmDeliverred in case/boxIP protection: IP 67Accuracy:SpindleResolution: 640x480 PixelCollet: 9Battery: Wiederaufladbarer Lithium-Batterie und USB-LadekabelVisible range: 12,7-305mmSpecial features: Unterstützt iPhone, iPad, Android-Handy und PCSetting standard:Ideal for: schnelle, visuelle Überprüfung an schwer zugänglichen Stellen z.B. Hohlräumen und Rohren in der Automechanik und im BauwesenDigitalLength: 1000 mmLight: mit einstellbaren LED-LeuchtenAccessories included: Magnet-, Haken-, 90⁰-Spiegelaufsatz und NetzteilVideo insepction endoscope quick and easy order Online!!

Der Amboss bietet eine stabile Auflagefläche mit Ø30 mm und sorgt so für verlässliche, wiederholbare Messwerte; kombiniert mit der robusten Verarbeitung von Microtech Metrology entsteht ein langlebiges Zubehörteil für den Werkstattalltag. Bestellen Sie den Amboss direkt über Metav Werkzeuge oder nutzen Sie die Beratung bei technischen Fragen. Amboss – Messgeräte‑Zubehör von Microtech Metrology Amboss ist ein kompaktes Zubehörteil für Messgeräte und bietet eine stabile Auflagefläche zur Verbesserung der Messwiederholbarkeit in Produktions‑ und Werkstattumgebungen. Präzise Auflagefläche Ø30 mm Kompatibel mit Messgeräten und Vorrichtungen Robuste Ausführung für Wiederholmessungen Einfache Montage und sichere Positionierung Stabile Auflage für konsistente Messungen Die Auflagefläche mit Ø30 mm ist so ausgelegt, dass Bauteile beim Erfassen sicher positioniert werden können. Dank der flachen Kontaktfläche reduziert sich die Gefahr von Kippfehlern, was die Wiederholgenauigkeit bei wiederholten Messungen verbessert. Gerade bei Serienprüfungen sorgt die robuste Ausführung dafür, dass Messzyklen mit gleichbleibender Qualität ausgeführt werden können, ohne dass häufige Justagen nötig werden. Einfache Integration ins Messumfeld Der Amboss ist als Zubehör für Messgeräte konzipiert und lässt sich unkompliziert in bestehende Prüfabläufe einbinden. Dadurch wird die Handhabung bei Innen‑, Außen‑ oder Stufenmessungen erleichtert, weil Werkstücke schneller und sicherer positioniert werden können. Die kompakte Bauform macht das Teil besonders geeignet für beengte Messplätze und Vorrichtungen. Langlebigkeit und Werkstatt‑Praxis Hergestellt für den täglichen Einsatz, bietet die Ausführung eine hohe Widerstandsfähigkeit gegenüber mechanischer Beanspruchung. Die Materialwahl und Fertigungsqualität von Microtech Metrology reduzieren Verschleiß und sorgen für konstante Performance über viele Messzyklen hinweg. Dadurch sinkt der Wartungsaufwand und die Gesamtbetriebskosten werden langfristig gesenkt. Anwendungsfelder und Zielgruppe Dieses Zubehör richtet sich an Anwender im Maschinen‑ und Werkzeugbau, in der Qualitätskontrolle sowie an Werkstätten, die Messgeräte mit stabilen Auflageflächen ergänzen möchten. Insbesondere Fertigungsbetriebe profitieren von der einfachen Integration und der verbesserten Handhabung bei wiederholten Messaufgaben. Metav Werkzeuge empfiehlt den Amboss als zuverlässige Ergänzung für präzise Messaufgaben; bei Fragen oder für eine individuelle Beratung erreichen Sie den Vertrieb per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 110750030 Marke: Microtech Metrology Bezeichnung: Amboss Fakten Messflächen: Ø30 mm GTIN: 4061905459177 Besonderheiten Kategorie: Messgeräte > Zubehör Storytrigger: zubehör FAQ Für welche Messaufgaben ist der Amboss geeignet? Der Amboss von Microtech Metrology eignet sich als stabile Auflagefläche für wiederholbare Prüfungen an Messgeräten und kann insbesondere bei Serienmessungen die Positionierung vereinfachen; Artikelnummer 110750030. Wie groß ist die Auflagefläche des Amboss? Die Auflagefläche hat einen Durchmesser von Ø30 mm, was eine kompakte, aber stabile Kontaktfläche für viele Werkstücke bietet. Ist der Amboss für den Dauereinsatz in der Fertigung geeignet? Ja, die robuste Ausführung des Amboss von Microtech Metrology wurde für den regelmäßigen Werkstatteinsatz entwickelt und reduziert Verschleiß bei häufigen Messzyklen. Kann der Amboss in bestehende Vorrichtungen integriert werden? Der Amboss ist als Messgeräte‑Zubehör konzipiert und lässt sich einfach in Vorrichtungen und Messaufbauten einbinden, um die Positionierung von Bauteilen zu erleichtern. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools

Take advantage of a compact, workshop-ready solution that combines a fine-adjustment spindle with a Ø60 mm measuring table and a rigid Ø22 × 180 mm column for reproducible indicator positioning — order directly via Metav Werkzeuge or request advice from our consultants. Stand — Dial gauge stand with fine adjustment and Ø60 mm table (Microtech Metrology) The Stand is a dial gauge stand designed for stable, repeatable measurements in workshops and inspection benches, combining a compact base with micrometre-style positioning for precise indicator alignment. Fine-adjustment mechanism for micrometre positioning Large Ø60 mm measuring table for stable mounting Rigid column Ø22 × 180 mm for consistent support Compact base 149 × 90 × 30 mm for bench stability Precision control for reliable measurement results The combination of a fine adjustment mechanism and a robust support geometry enables controlled, small-step positioning of indicators, reducing setup variability. A micrometre-like adjustment removes abrupt movements and helps achieve repeatable contact force when taking readings. This level of control suits routine inspection tasks where small deviations matter and contributes directly to reduced rework and faster quality checks. The dial gauge stand concept supports common workshop indicators and makes precise comparative measurements straightforward. Stable construction for repeatable setups A substantial Ø60 mm measuring table and a Ø22 × 180 mm column form the mechanical backbone for consistent mounting and resistance to lateral play. The 149 × 90 × 30 mm base sits low on the bench to minimise rocking, while the vertical support maintains alignment during repeated measurements. These structural choices translate into measurable benefits: fewer discarded parts, less time spent on repositioning, and improved data quality in small-series production and toolroom tasks. The design balances rigidity and compact footprint for everyday metrology needs. Workflow integration and workshop benefits Engineered for practical bench use, the device accepts standard indicator fittings and fits easily into inspection stations or alongside machine tools. The fine adjustment feature eases the alignment of measuring probes to narrow grooves or small bores, while the compact footprint keeps valuable bench space free. Supplied by Microtech Metrology, the unit is tailored to users who prioritise dependable setup and swift changeovers; it supports routine checks, go/no‑go comparisons and setup verification with minimal additional tooling. Clear mechanical design reduces user training time and simplifies daily operation. For tailored purchasing or technical clarification, contact Metav Werkzeuge in Emmerich — Metav Werkzeuge provides product advice and order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 161002020 GTIN: 4061905456619 Manufacturer: Microtech Metrology eClass: 21170604 Core specifications Base dimensions: 149 × 90 × 30 mm Measuring table: Ø60 mm Column: Ø22 × 180 mm Mounting / receptacle: 8 Fine adjustment: yes Special features Fine-adjustment spindle for precise positioning Designed for dial gauges / dial indicators Compact footprint for bench integration Rigid column for repeatable setups FAQ What indicator types fit the stand? The stand accepts standard dial gauges and dial indicators; the mounting receptacle is listed as 8 and accommodates common indicator stems for secure fastening. Is this product supplied ready for use straight away? The Microtech Metrology dial gauge stand is delivered as a ready-to-install fixture and includes the mechanical fine-adjustment feature for immediate integration into inspection stations. Can the stand be used for comparative measurements on a production bench? Yes, the combination of a Ø60 mm measuring table and a rigid Ø22 × 180 mm column makes the stand suitable for repeatable comparative and setup measurements in small-series production. Does the stand require any special mounting or clamping? No specialised clamping is required; the compact base and standard mounting interface enable secure bench placement and straightforward attachment of dial indicators. Which benefits does the fine adjustment provide in daily use? The fine adjustment allows controlled micro-movements, improving alignment accuracy and reducing the risk of overshoot when positioning probes for tight features. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of straightforward thread conversion together with a compact flange form and low mass for reliable fixture adaptation in metrology and workshop applications; order the adapter directly via Metav Werkzeuge or request advice from our consultants if clarification is needed. Thread adapter M8 to M10, Ø 24 mm, 15 mm thickness — Metav IndustryLine Thread adapter M8 to M10, Ø 24 mm, 15 mm thickness provides a simple, robust solution for converting an M8 threaded fixing into an M10 mounting point, ideal for adapting existing fixtures and measuring accessories. Thread adapter M8 to M10 Ø 24 mm compact flange 15 mm thickness for stable mounting Lightweight — 0.2 kg Convert existing fixings without reworking components A dedicated thread adapter simplifies the transition from an M8 fixing to an M10 thread, eliminating the need for re-machining or new tapped holes. The compact Ø 24 mm flange concentrates clamping forces close to the fixing point, which supports consistent seating and repeatability during fixture changes. This conversion is particularly valuable in metrology environments where maintaining datum positions and minimising setup time are essential for production throughput and inspection consistency. Compact geometry that supports stable mounting and repeatable measurement The adapter’s 15 mm thickness and reduced overhang contribute to mechanical stability, helping to keep the mounted element aligned under lateral load. With a mass of 0.2 kg, the component adds minimal inertia to assemblies while still providing a robust interface between different thread standards. These attributes reduce the risk of micro-movements that could otherwise compromise dimensional checks, so the adapter assists in preserving precision throughout repeated tool or gauge changes. Practical inventory management and operational efficiency Standardising on a small range of adapters decreases the variety of specialised fastenings and fixtures in stock, yielding a measurable efficiency gain in procurement and faster changeovers at the bench. The simple function of the adapter—converting M8 threads to M10—offers a cost-effective route to reuse high-value accessories and measuring heads that would otherwise require bespoke adaptors or replacements, supporting lean workshop practices and shorter machine or inspection downtime. Installation guidance and inspection considerations Installation is straightforward: the adapter engages the female M10 receptacle while accepting the M8 fastener, providing a low-profile connection. As a mechanical accessory, the component does not require calibration and is intended for secure mechanical use rather than measurement certification. Regular visual inspection for wear or thread damage is recommended as part of routine maintenance to assure continued reliability and safe operation in industrial use. Contact Metav Werkzeuge today to discuss compatibility with existing fixtures and to order the Metav IndustryLine thread adapter M8 to M10 (SKU M206.110) for quick integration into production or inspection setups. Technical Data Article number: M206.110 GTIN: 4061905053580 Weight: 0.2 kg Dimensions: Ø 24 x 15 mm EClass: 21130112 Facts Thread sizes: M8 → M10 Flange diameter: 24 mm Thickness: 15 mm Mass: 0.2 kg SKU: M206.110 Special features Thread conversion M8 to M10 Compact flange design Low mass for minimal added inertia Reusable mechanical adapter Intended for mechanical fixing/adaptation FAQ Which thread sizes does the adapter convert? The thread adapter converts an M8 fastening to an M10 mounting point, enabling the use of M10 fixtures where only an M8 thread exists. What are the outer dimensions of the adapter? The adapter has a flange diameter of 24 mm and a thickness of 15 mm, as stated for the Metav IndustryLine thread adapter M8 to M10 (SKU M206.110). Is the adapter intended for precision measurement or does it need calibration? This adapter is a mechanical conversion accessory and does not require calibration; it is not a measuring instrument and is used to adapt threads mechanically. How much does the adapter weigh and does the mass affect fixtures? The adapter weighs 0.2 kg; the low mass minimises added inertia while providing a stable interface between thread sizes. Can the adapter be reused for multiple fixture changes? Yes, the adapter is designed for repeated use as a conversion element between M8 and M10 fixings, subject to routine inspection for thread wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com