Wissenswertes über Messwerkzeuge

Reliable, DIN‑compliant inspection for internal bores through a 14 mm hardened‑steel gauge pin with a designed wear allowance on the GO side, ensuring repeated pass/fail decisions remain reproducible; combine durability and standard conformity for consistent quality control. Order the limit plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit plug gauge MS911.218 — 14 mm hardened steel, DIN 7162 — Filetta The limit plug gauge MS911.218 is a DIN 7162‑compliant gauge pin designed for fast pass/fail inspection of internal bores in production and quality assurance environments. Hardened steel construction DIN 7162 14 mm nominal diameter gauge pin Wear allowance on the GO side Ensure decisive, repeatable go/no‑go checks on the shop floor A limit gauge pin like this delivers an immediate binary evaluation for bore acceptance, converting measurement into a clear production decision. Manufactured to DIN 7162, the pin provides a standardised reference, making it simple to compare results across shifts and machines. The hardened‑steel body maintains dimensional integrity under frequent use, while the wear allowance on the GO side extends service life without compromising the accuracy of rejection criteria. This reduces downtime caused by ambiguous results and supports faster throughput in quality control workflows. Robust construction that keeps inspection reliable over time The hardened‑steel construction resists deformation and surface damage, which helps maintain the declared nominal size of 14 mm through repeated cycles. The specified wear allowance is applied to the GO face to ensure that wear first affects the go tolerance before the no‑go limit, preserving measurement intent longer. Such design choices translate into fewer replacements, predictable maintenance intervals and lower total cost of ownership for inspection tooling in industrial environments. Conformity and traceability to support quality systems Built in accordance with DIN 7162, the gauge pin is suitable for integration into documented inspection plans and traceability chains. Using standardised limit gauges simplifies audit preparation and aligns measurements with recognised metrology practice. The simple go/no‑go principle reduces operator interpretation and supports consistent training outcomes—an advantage when multiple operators perform routine inspections on production lots. Practical handling and common applications Compact and robust, this gauge pin is primarily intended for direct checking of bore diameters in assembly, machining and incoming inspection. It works well on toolroom benches and in production control stations where quick verification is required. The pin’s geometry and finish enable smooth insertion into bores, and the hardened material ensures resistance to common shop contaminants. Where repeatability and fast decisions matter, this gauge pin offers a pragmatic balance of durability and simplicity. For traceable, DIN‑compliant inspection equipment, request the Filetta limit plug gauge MS911.218 via Metav Werkzeuge or contact our consultants in Emmerich for precise technical guidance. Technical data Article number: MS911.218 Product: Limit plug gauge (gauge pin) Brand: Filetta Nominal diameter: 14 mm Material: hardened steel Standard: DIN 7162 Special feature: wear allowance on GO side Core measurements Diameter: 14 mm Features and applications Suitable for pass/fail inspection of bores Category: gauge pins / measuring pins Durable, hardened‑steel construction Wear allowance increases service life FAQ What is the primary use of this gauge pin? The Filetta limit plug gauge MS911.218 is used for quick go/no‑go inspection of internal bores to determine acceptance or rejection on the shop floor. What material is the gauge made from and how durable is it? Manufactured from hardened steel, the gauge pin provides high wear resistance; the built‑in wear allowance on the GO side prolongs its effective service life. Is the gauge made to any standard? Yes, the gauge complies with DIN 7162, making it suitable for standardised inspection routines and documented quality procedures. Which nominal size does this article cover? This specific article covers a nominal diameter of 14 mm as marked on the product designation. Can this gauge pin be used in production line sampling? Yes, the robust construction and simple go/no‑go function make MS911.218 appropriate for rapid sampling and routine checks within production and incoming inspection operations. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of the combination of IP65 protection, high readability of 0.1 g and a 3 kg capacity for dependable production weighing; order the instrument directly via Metav Werkzeuge or consult our advisors for specification support. IFB.3K-4 industrial scale by KERN — IP65, stainless steel plate, legal-for-trade The IFB.3K-4 is a heavy-duty industrial scale with legal‑for‑trade approval, engineered for accurate weighing and piece counting in production, quality control and laboratory settings. Legal approval for trade use IP65 protection against dust and water High precision: 0.1 g readability Stainless steel weighing plate, durable housing Consistent precision that supports quality control The instrument relies on a strain gauge weighing system that delivers a readability of 0.1 g and a reproducibility of 0.0001 kg, ensuring measurements are both precise and repeatable. This high level of resolution translates directly into fewer rejected batches and more reliable inventory figures. Linearity is specified at ±0.0003 kg, which reduces measurement uncertainty across the entire weighing range and supports traceable results for routine production checks. Built to withstand demanding environments Designed for practical workshop and production use, the unit combines a stainless steel weighing plate with a robust plastic housing and an IP65 rating for protection against dust and water ingress. The durable construction reduces downtime caused by cleaning or exposure to splash and particulate, while the compact platform dimensions make the balance suitable where bench space is limited. The scale’s solid build supports long service life and low maintenance intervals, contributing to predictable operating costs. Faster workflows with counting and clear readout The balance includes a clear LCD display with a digit height of 52 mm for rapid read-outs on the shop floor, plus counting capabilities with a minimum piece weight of 2 g for normal applications and 200 mg for laboratory counting mode. The combination of rapid stability, visible digits and reliable piece-count algorithms streamlines batch processing and reduces operator handling time. Power is supplied via a plug-in adaptor set covering AUS, CH, EURO, UK and US outlets for straightforward integration in multinational facilities. Traceability, calibration and dependable supply The instrument is supplied with legal-for-trade approval and is suitable where measurements must be auditable and conform to regulatory checks. Calibration can be performed in‑house or by certified partners to maintain conformity. Sourced through Metav Werkzeuge, the unit benefits from a European distribution approach that emphasises consistent stock management and quality filtering at the Emmerich location. This supply model reduces lead times and supports reliable replenishment for production-critical equipment. Discuss the KERN IFB.3K-4 with Metav Werkzeuge in Emmerich to confirm fit-for‑purpose specifications and arrange prompt delivery or tailored advice Technical data Article number: TIFB-A SKU: IFB.3K-4 GTIN: 4045761244016 Manufacturer: KERN Origin: CN ECLASS: 27320401 Tariff number: 84238129 Facts Capacity: 3 kg Readability: 0.1 g Reproducibility: 0.0001 kg Linearity: ±0.0003 kg Instrument weight: 4.5 kg Weighing plate rectangle: 230×230 mm Platform dimensions: 230×230×110 mm Display digit height: 52 mm Operating temperature: -10 °C – 40 °C Relative humidity (max): 80% Input voltage: 100 V – 240 V, 50 / 60 Hz Smallest piece weight (counting normal): 2 g Smallest piece weight (counting lab): 200 mg Special features Weighing system: strain gauge Housing: plastic; weighing plate: stainless steel Protection class: IP65 Legal‑for‑trade approval (heavy duty version) Power supply: plug‑in adaptor (AUS; CH; EURO; UK; US) No battery included FAQ What is the maximum capacity and precision of the scale? The scale has a maximum capacity of 3 kg with a readability of 0.1 g and reproducibility of 0.0001 kg for consistent results. Is the unit suitable for dusty or wet production areas? Yes. With an IP65 protection rating and a stainless steel weighing plate, the instrument is designed for environments where dust and light splashing occur. Can the balance be used for piece counting in production? The balance offers counting modes with a smallest piece weight of 2 g in normal counting and 200 mg in laboratory mode, enabling efficient batch counting. Does the scale include a power adaptor for different countries? A plug‑in power adaptor set for AUS, CH, EURO, UK and US is included to facilitate use in multiple regions. Is the IFB.3K-4 legally approved for trade? The heavy‑duty version is supplied with legal‑for‑trade approval and is suitable where audited weighing results are required. Manufacturer: KERN, Emmerich distribution centre — Contact: info@metav-werkzeuge.com / +49 2822 7131930

Take advantage of fast, reliable counting with 0.1 g readability, a 6 kg weighing range and a durable stainless-steel pan to reduce inventory time and minimise errors. Order directly via Metav Werkzeuge or consult our specialists for tailored integration into production and warehouse workflows. KERN CPB 6K0.1N – Professional counting scale, 6 kg range, 0.1 g readability The KERN CPB 6K0.1N is a professional counting scale optimised for inventory, picking and production control in electronics, plastics and packaging environments. High-resolution counting: 60,000 steps Two-in-one: counting and weighing modes Compact design with stainless-steel pan Fill-to-target and pre-tare functions High-precision counting that speeds up inventory The CPB-series professional model delivers measurable time savings through high counting resolution and proven repeatability. With a 6 kg range and 0.1 g readability, the instrument supports detailed part counts while maintaining a linearity of ±0.0004 kg and reproducibility of 0.0002 kg, ensuring consistent results batch after batch. The built-in automatic reference optimisation refines the average piece weight stepwise, reducing the need for repeated manual references and lowering cumulative counting error during large inventories. Robust design and flexible power for multi-location use A stainless-steel weighing plate and lightweight plastic housing combine durability with portability; the device weighs 3.2 kg and fits compact workstations. The scale accepts 100–240 V power via the supplied plug adapters (CH, EURO, UK, US) and offers an optional internal battery for mobile operation, charged in approximately 12 h. This flexibility makes the instrument suitable for production, warehouse and shipping areas where temporary workstations are required without compromising measurement stability. Counting functions that improve process control Designed to simplify counting tasks, the instrument includes fill-to-target, pre-tare and an accumulating count memory for summing identical part batches. Three dedicated displays show weight, reference weight and total piece count simultaneously, enabling clear monitoring at a glance. The keypad allows programming of desired reference piece counts or known reference weights, while an audible signal indicates when a programmed target is reached—an effective aid during fulfilment and filling operations. Application scope and technical suitability for industry Engineered around a strain gauge weighing system, this counting instrument is appropriate for the electronics industry, plastics processing, packing lines and stocktaking. It performs reliably within an ambient range of 0°C to 40°C and up to 80% relative humidity, supporting typical workshop conditions. Where very small parts are involved, laboratory conditions allow recognition of parts down to 100 mg; under normal conditions the minimum practical piece weight is 1 g, making the model versatile across many component sizes. Contact Metav Werkzeuge in Emmerich am Rhein for tailored advice on integrating the KERN CPB 6K0.1N into existing processes, or request further technical details by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CPB-N SKU: CPB.6K0.1N GTIN: 4045761124400 Manufacturer: KERN Origin: CN Core specifications Weighing range: 6 kg Readability: 0.1 g Smallest piece weight (lab): 100 mg Smallest piece weight (normal): 1 g Linearity: ±0.0004 kg Reproducibility: 0.0002 kg Weighing plate (rectangular): 295×225 mm Housing dimensions (without removable parts): 315×350×105 mm Weight: 3.2 kg Operating temperature: 0°C–40°C Max ambient humidity: 80% Display digit height: 20 mm Display type: LCD Weighing system: Strain gauge Design & functions Material: plastic housing, stainless-steel weighing plate Battery: optional internal; charging time 12 h Power supply: 100 V–240 V, 50/60 Hz; adapters CH/EU/UK/US included Counting features: automatic reference optimisation, fill-to-target, pre-tare, count memory Modes: counting and weighing (switchable) Accessories included: protection hood Tariff code: 84238129 FAQ How accurate is the scale for small parts? The KERN CPB 6K0.1N provides 0.1 g readability with laboratory-level detection down to 100 mg under controlled conditions; under typical workshop conditions the practical minimum piece weight is 1 g. Can the scale be used at different workstations? Yes, the model is compact (315×350×105 mm) and lightweight (3.2 kg), and with the optional internal battery and multi-plug adapters it can be deployed across production, warehouse and shipping areas. Which industries and tasks is this instrument suited for? The device is particularly suitable for electronics, plastics, packaging, production monitoring, picking and stocktaking where fast, reliable counting and weighing are required. What functions help reduce counting errors and speed up processes? Features such as automatic reference optimisation, fill-to-target with audible signal, pre-tare and an accumulating count memory simplify setup and reduce manual steps during inventory and filling operations. Which power supplies and adapters are provided? A 100–240 V plug-in power supply is included; adapters for CH, EURO, UK and US sockets come with the unit, enabling international use without additional accessories. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930

Benefit from a hardened-steel construction, conformity to DIN 7162 and a defined wear allowance on the GO side for dependable dimensional control; order the limit gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Limit gauge pin MS911.219 — 15 mm hardened-steel limit gauge to DIN 7162 by Filetta The Limit gauge pin MS911.219 is a precision limit gauge pin intended for quick GO/NO‑GO verification and repeatable dimensional checks in production and inspection routines. Hardened steel for stable measurement Conforms to DIN 7162 standard Wear allowance on the GO side Precision 15 mm gauge diameter Consistent conformity for routine inspection A hardened, standardised limit gauge offers a straightforward method to verify part dimensions with minimal interpretation. The MS911.219 is made from hardened steel, ensuring surface durability and stable contact geometry during repeated use. Conformity with DIN 7162 provides an objective reference that supports quality control documentation and helps to reduce false rejections. For workshop environments and inspection benches where speed and clarity are essential, a limit gauge pin delivers a direct binary check that complements more elaborate measuring systems. Robust construction for repeatable results Durability and repeatability are primary considerations for shop-floor gauges. The chosen material and heat treatment yield a contact surface that resists deformation, so checks remain reliable over long production runs. The documented wear allowance on the GO side compensates for gradual surface wear and preserves the intended acceptance criteria; this feature extends service life and maintains measurement integrity between maintenance intervals. As a compact verification tool, the pin requires no auxiliary power and offers an efficient way to protect throughput without adding complexity. Easy integration into inspection workflows Limit gauge pins are inherently low‑complexity instruments that integrate well into production flow, in-line checks and final inspection stages. The compact 15 mm diameter simplifies handling and storage while allowing quick GO/NO‑GO trials at several positions on a component. When used alongside calibrated measurement procedures, these gauges contribute to faster decision-making and fewer production stoppages. Clear marking and standard conformity aid traceability in quality records and make these pins suitable for routine use in mechanical workshops and inspection departments. Practical advantages for purchasing and maintenance Standardised gauges such as this reduce training overhead because their purpose and limits are unambiguous. The solid construction cuts maintenance intervals and the wear allowance on the GO side postpones replacement until a defined criterion is reached, lowering total lifecycle costs. For companies that standardise workbenches, limit gauge pins offer a cost‑effective supplement to calipers and micrometres, serving as quick acceptance checks that keep assembly and machining processes moving. Contact Metav Werkzeuge for technical guidance on integrating the Filetta limit gauge pin MS911.219 into existing inspection routines or to arrange prompt delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MS911.219 Model: MS911.219 Standard: DIN 7162 Facts Diameter: 15 mm Special features Material: hardened steel Feature: wear allowance on the GO side Category: gauge pins / test pins FAQ What inspection tasks suit this type of gauge? Limit gauge pins are intended for quick GO/NO‑GO checks and the MS911.219 by Filetta is well suited to routine diameter verification and reproducible bench checks. Is the MS911.219 suitable for continuous shop‑floor use? Yes, the hardened-steel construction and the specified wear allowance on the GO side make the Filetta MS911.219 appropriate for frequent use in production environments. Does this gauge conform to any standard? The Filetta limit gauge pin MS911.219 is supplied to DIN 7162, enabling consistent acceptance criteria and straightforward traceability in quality documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Benefit from the combination of hardened steel construction and conformity to DIN 7162 for repeatable internal diameter checks; the 15 mm nominal size offers a direct fit for standard bores. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge – 15 mm, hardened steel (Filetta) Limit plug gauge for quick go/no-go verification of internal diameters in production and inspection Hardened steel construction Compliant with DIN 7162 standard 15 mm nominal diameter gauge Wear allowance on master side Precision inspection where it matters The limit plug gauge is designed for fast and reliable verification of internal bores in routine quality checks. Manufactured from hardened steel, the gauge offers mechanical resilience that reduces wear and maintains form under repeated use. Conformity with DIN 7162 ensures that the gauge fits established acceptance procedures and inspection protocols, simplifying integration into existing quality workflows. As a result, production lines gain a compact, low-effort control tool that supports consistent pass/fail decisions. Durability and traceable performance A clear technical advantage of this gauge is the incorporated wear allowance on the master side, which prolongs usable life and offers predictable wear behaviour. The material choice—hardened steel—provides resistance to deformation and abrasion, reducing dimensional drift during frequent checks. For workshops and inspection rooms that require robust tools rather than disposable checking aids, this construction translates into fewer replacements and stable measurement outcomes over time, supporting reliable component acceptance. Simple handling for reliable results The gauge’s nominal 15 mm size and compact form factor make it suitable for rapid in-process checks and bench inspection tasks in metalworking and assembly. As a limit gauge, it provides unambiguous go/no-go feedback without needing additional measurement devices, speeding up throughput while keeping control simple. The Filetta item (Article number MS911.177) is particularly suited to operators who prioritise straightforward inspection methods and durable tooling that aligns with recognised standards. For reliable acceptance testing and long-term workshop use, request the Filetta limit plug gauge from Metav Werkzeuge—technical advice and supply are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: MS911.177 Name: Limit plug gauge Brand: Filetta Facts Diameter: 15 mm Standard: DIN 7162 Special features Material: hardened steel Application: internal diameter verification (plug gauge) Special feature: wear allowance on master side Category: Gauges (Measuring instruments > Gauges) FAQ What is the intended use of this limit plug gauge? The limit plug gauge is intended for go/no-go checks of internal diameters in production and inspection; the Filetta gauge MS911.177 verifies whether bores meet the specified acceptance limits. Is the gauge suitable for continuous shop-floor use? Yes, the hardened steel construction of the Filetta limit plug gauge ensures robustness for frequent shop-floor inspections and routine quality control. Which standard does the gauge conform to? The gauge conforms to DIN 7162, meaning it fits standard inspection routines and documented acceptance criteria for plug gauges. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of the combination of precise 0.005 mm reading, a self‑centring three‑point measuring mechanism and interchangeable measuring inserts to ensure reproducible internal measurements of blind bores in the standard workshop range. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Three‑point internal micrometer MS908.665 — self‑centring, 150–175 mm range (Metav IndustryLine) The three‑point internal micrometer is an analogue internal measuring instrument designed for reliable measurement of blind bores and internal diameters in the workshop and production environment. Self‑centring three‑point design Measurement range 150–175 mm Analogue reading 0.005 mm resolution Hardened measuring faces, interchangeable insert Reliable metrology for internal diameters and blind bores The three‑point design offers consistent contact on the bore surface, enabling reproducible centring even in deep blind holes. With a measurement range of 150–175 mm this instrument fits the standard class of workshop metrology where reach, stiffness and one‑hand operation are required. The analogue scale provides a clear 0.005 mm reading and an equivalent stated accuracy, which supports routine quality checks and rapid go/no‑go decisions on the shop floor. Practical handling and application benefits for production Interchangeable measuring inserts allow adaptation to differing bore geometries without replacing the whole instrument, reducing downtime and consumable cost. The self‑centring mechanism simplifies alignment and lowers operator variability, which increases throughput and decreases rework. Designed for internal measurements including blind bores, the tool is particularly suitable for machine shops, toolrooms and maintenance departments that require straightforward, rugged measuring devices for repeat measurements. Construction and durability tailored to industrial use Hardened measuring faces reduce wear and maintain measurement fidelity over long service periods; the instrument’s analogue mechanics are engineered for robustness rather than electronic sensitivity. The combination of hardened anvils, an interchangeable insert system and solid construction ensures long‑term stability under workshop conditions and predictable measurement behaviour when performing internal diameter checks on components. Contact Metav Werkzeuge in Emmerich for tailored advice on the MS908.665 three‑point internal micrometer and to arrange delivery from stock — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: MS908.665 Name: Three‑point internal micrometer (Dreipunkt‑Innenmessschraube) Manufacturer: Metav IndustryLine Core technical data Measurement range: 150–175 mm Reading / resolution: 0.005 mm Accuracy: 0.005 mm Length: 145 mm Analogue instrument Special features Self‑centring three‑point design Hardened measuring faces Interchangeable measuring insert Suitable for blind bores Analogue scale, workshop grade FAQ What measuring range does the MS908.665 cover? The MS908.665 three‑point internal micrometer by Metav IndustryLine covers a measurement range of 150–175 mm. How fine is the resolution and what accuracy is stated? The instrument provides an analogue reading with 0.005 mm resolution and a stated accuracy of 0.005 mm for routine workshop control. Is the design suitable for blind hole measurements? Yes, the three‑point geometry and self‑centring action of this micrometer make it particularly suitable for reliable measurements in blind bores. Can the measuring faces be replaced if worn? The MS908.665 features an interchangeable measuring insert system; hardened faces prolong service life and can be renewed through the insert mechanism. For which workshop tasks is this micrometer intended? The instrument is designed for internal diameter checks in machine shops, toolrooms and maintenance operations where robust, repeatable analogue measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise multi-range weighing, robust construction and seamless digital integration for reliable handling in logistics and production. Order the KERN BID 600K-1DS directly via Metav Werkzeuge or ask the consultants for tailored advice. KERN BID 600K-1DS floor scale — high-resolution multi-range platform with network interfaces The KERN BID 600K-1DS is a versatile floor scale designed for industrial logistics and production environments, offering automatic multi-range switching and solid platform performance for reliable throughput. High-resolution multi-range weighing 1,000×1,000 mm anti-slip steel platform IP65 indicator; IP67 load cells RS-232, USB, WLAN and Bluetooth options Precision that keeps throughput steady and verifiable The floor scale delivers high-resolution multi-range weighing across two selectable maximum ranges (300 kg and 600 kg) with a readability of 50 g / 100 g, ensuring fine measurement steps where they matter and higher capacity when needed. Linearity and reproducibility values (±0.3 kg / 0.6 kg and 0.1 kg / 0.2 kg respectively) indicate consistent results for repetitive tasks, supporting quality control and inventory accuracy. The device’s strain-gauge weighing system and sizeable digit height (LCD 25 mm) make readouts clear in busy environments while reducing human error during rapid handling. Integrates into existing systems to speed up data workflows Data exchange is simplified by a range of standard and optional interfaces: RS-232, USB, WLAN, Bluetooth and Ethernet. The instrument supports the KERN Communication Protocol (KCP), largely compatible with MT-SICS, which enables remote querying, control and straightforward connection to printers, PCs or PLCs. Built-in functions for summation and piece counting accelerate packing and shipping processes by reducing manual calculations. The included mains adapter set (EU/UK/US/CH) ensures immediate operation in different regions without delay. Built to withstand daily industrial demands and simplify maintenance The platform is a 1,000×1,000 mm anti-slip steel tread plate, providing a durable surface for pallets and heavy loads. Four alloy-steel load cells, silicone coated and rated IP67, combined with an IP65-protected indicator, protect the measuring chain from dust and splashes. The design allows comfortable levelling of the bridge and top access to the junction box for quick checks or service. Each scale is delivered in a protective wooden box to reduce transport damage. The robust construction and optional verification for legal-for-trade use make it suitable for warehouse logistics, production, wholesale and shipping operations where consistent performance and traceability are required. Contact Metav Werkzeuge in Emmerich for advice on deploying the KERN BID 600K-1DS in your workflow and to arrange prompt delivery or configuration support Technical data Article number: BID.600K-1DS Manufacturer: KERN GTIN: 4045761275645 Origin: CN Core specifications Weighing ranges: 300 kg; 600 kg Readability: 50 g; 100 g Platform dimensions: 1000×1000×108 mm Platform surface: 1000×1000 mm Display digit height: 25 mm Weighing system: Strain gauge Power: 100V–240V AC 50/60 Hz, 0.4 A max Net weight: 67 kg Max. ambient humidity: 80% Linearity: ± 0.3 kg; 0.6 kg Reproducibility: 0.1 kg; 0.2 kg TAR/zero function and counting/summing functions included Special features Multi-range weighing with automatic switching between ranges Indicator housing: plastic, protection class IP65 Load cells: 4 × alloy steel, silicone-coated, protection class IP67 Anti-slip steel checker tread plate Convenient levelling and top access to junction box Summation of weights and piece counting functions Interfaces: RS-232, USB, WLAN, Bluetooth, Ethernet (optional) KERN Communication Protocol (KCP), largely MT-SICS compatible Delivered in protective wooden box Mains adapters included: EU, UK, US, CH Optionally legal-for-trade (wahlweise Eichfähig) Recommended for: warehouse logistics, industry, wholesale, picking, shipping FAQ Which weighing ranges and resolutions are available? The scale supports two weighing ranges (300 kg and 600 kg) with resolutions of 50 g and 100 g respectively; the KERN BID 600K-1DS switches automatically between ranges as load increases. Can the scale be integrated into a networked system? Yes—the unit offers RS-232 and USB as standard, with WLAN, Bluetooth and Ethernet available; the KERN Communication Protocol (KCP) enables remote querying and control and is largely compatible with MT-SICS. Is the platform suitable for heavy-duty, wet or dusty environments? The platform is a rugged anti-slip steel tread plate and the system combines an IP65-protected indicator with IP67-rated load cells, making it suitable for dusty or splash-prone industrial settings. Does the instrument support counting and totalising functions? The device includes piece counting and weight summation features to speed up picking and packing operations in logistics and production environments. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of high‑resolution multi‑range weighing and robust IP67 protection together with a welded, easy‑to‑clean platform for reliable industrial use; order the scale directly via Metav Werkzeuge or consult our team for technical advice. KERN BIC 600K-1S floor scale — High‑resolution multi‑range, IP67 The KERN BIC 600K-1S is a rugged industrial floor scale engineered for production, logistics and packaging tasks where durable construction and precise weighing are essential. High-resolution multi-range 2×3000 d IP67 waterproof design for harsh environments 1000×1000 mm non-slip steel platform Wall bracket and easy 4-button operation Precise multi-range weighing for process control The scale offers a multi-range concept with two selectable ranges that deliver high resolution for light loads and full capacity for heavier items; this enables both fine controls and bulk weighing without separate scales. With readable increments of 0.1 kg and 0.2 kg (depending on the chosen range) and documented linearity ±0.3 kg / ±0.6 kg, the system supports consistent inventory checks and batch verification. Built on strain‑gauge load cells, the weighing system provides reproducible values (reproducibility 0.1 kg / 0.2 kg) that help maintain quality control in fast‑paced production environments. Robust construction that reduces downtime The platform is a welded checker‑plate made from powder‑coated steel, designed to withstand routine industrial wear while offering a non‑slip surface for safe loading. An IP67 rating protects the sensor electronics against dust and temporary immersion, making the scale suitable for washdown procedures. The platform includes screw holes to facilitate lifting for cleaning and the housing for the display is plastic for corrosion resistance. These design choices reduce maintenance time and extend service intervals, supporting uninterrupted workflows. Fast installation and user-friendly operation The weighing bridge integrates four strain‑gauge load cells with a top‑access junction box for straightforward wiring and access during commissioning. An intuitive 4‑button operation and a clear LCD display (25 mm digits) simplify daily tasks and speed up staff training. The indicator can be mounted on the supplied wall bracket, allowing flexible placement close to packing or dispatch areas. Power options include a universal 100–240 V AC adapter with AUS/EU/UK/US plugs and an optional battery (factory) for temporary, cordless operation — battery lifecycle is approximately 60 h when using 4×1.5 V AA cells. Designed for industry: applications and services This floor scale is tailored for heavy‑duty sectors such as industrial production, warehouse logistics, packaging, automotive and shipping. The 1000×1000 mm platform accommodates pallet and bulk loads up to 300 kg or 600 kg, switching automatically between ranges to match load size and accuracy requirements. Units are shipped in a robust wooden crate to protect sensitive weighing components during transport. For calibration needs, a certified inspection service is available to perform on‑site calibration, ensuring the system meets regulatory and process requirements. For robust, accurate industrial weighing choose the KERN BIC 600K-1S and contact Metav Werkzeuge in Emmerich for tailored advice, calibration options and reliable supply. Technical Data Article number: BIC.600K-1S Manufacturer: KERN GTIN: 4045761193222 Facts Weighing ranges: 300 kg; 600 kg Readability: 0.1 kg; 0.2 kg Platform dimensions: 1000×1000 mm Platform height: 108 mm Display digit height: 25 mm Weight: 67 kg IP protection: IP67 Power supply: 100 V - 240 V AC 50/60 Hz 0.3 A Battery: 4×1.5 V AA (optional) Battery operating time: 60 h Operating temperature: −10 °C to 40 °C Linearity: ± 0.3 kg; 0.6 kg Reproducibility: 0.1 kg; 0.2 kg Tariff code: 84238220 Special features Weighing bridge: non‑slip steel checker plate Load cells: 4 × strain‑gauge Platform: welded with screw holes for lifting Surface finish: powder‑coated steel Junction box: top access Operation: simple 4‑button interface Wall bracket for indicator included Delivered in protective wooden box Optional factory battery Mains adapter plugs included: AUS; EURO; UK; US Weighing system designation: strain‑gauge FAQ What maximum capacities are available with this floor scale? The KERN BIC 600K-1S is offered with weighing ranges of 300 kg and 600 kg, switching automatically between ranges for optimal resolution. How accurate is the scale for small loads? In the lower range the scale achieves a readability of 0.1 kg, with reproducibility of 0.1 kg and linearity within ±0.3 kg, providing dependable results for finer measurements. Is the platform suitable for washdown and dusty environments? Yes, the IP67 protection and powder‑coated steel platform make the KERN BIC 600K-1S suitable for demanding environments and routine cleaning procedures. Which power options are supported for mobile or temporary use? Standard power is via a 100–240 V AC adapter (AUS/EU/UK/US plugs supplied) and an optional battery (4×1.5 V AA) is available for cordless operation. Can the scale be integrated near packing or dispatch areas? The scale includes a wall bracket for the indicator and a top‑accessible junction box, facilitating quick installation and positioning close to workflow stations. KERN; Country of origin: CN; GTIN: 4045761193222

Take advantage of precise piece counting, a 0.2 g readability and a robust stainless steel weighing plate to speed up inventory and picking tasks. The combination of high counting resolution and integrated ESD protection supports accurate, repeatable results in logistics and packaging workflows. Order the KERN CXB 3K0.2 directly via Metav Werkzeuge or ask our consultants if needed. KERN CXB 3K0.2 — counting scale with 3,000 g range and 0.2 g readability The KERN CXB 3K0.2 is an entry-level counting scale designed for accurate piece counting across warehouse logistics, packaging lines and inventory control. 3,000 g capacity, 0.2 g readability Counting resolution 30,000 points Stainless steel weighing plate Integrated ESD protection Faster, more reliable counting for inventory and picking A high counting resolution and automatic reference routines reduce manual corrections and speed throughput: the 30,000-point resolution together with the automatic reference optimisation steadily improves the average part-weight during counting runs. This translates into fewer recounts and shorter inventory cycles, a direct efficiency gain for stocktaking and order picking. The fill-to-target feature, which signals attainment of a programmed target by sound and light, supports precise batch filling and minimises over- or underfilling. Consistent measurements and traceable results Designed for reproducible outcomes, the instrument delivers 0.2 g readability and reproducibility, with linearity within ±0.4 g, ensuring that single-part counts remain reliable across repeated measurements. The device provides three separate displays for net weight (calibratable), reference weight and total piece count, improving process transparency and traceability. For quality managers and auditors, these measurable specifications provide a sound basis for acceptance and documentation of counting procedures. Robust construction for workshop and shopfloor use Built with a stainless steel weighing plate and an integrated ESD protection system, the scale is suited to handling plastic small parts and sensitive components without static-related issues. The unit switches between counting and weighing modes at the press of a button and supports PRE-TARE for known container weights, which is practical for filling controls and dosing tasks. With an energy-saving backlight, an internal rechargeable supply (approx. 8 h charge time) and an EU adapter included, the instrument is ready for continuous use in varied environments from warehouse floors to packing stations. For a dependable counting solution from KERN, ask Metav Werkzeuge in Emmerich for a detailed specification check and tailored recommendations for your process. Technical data Article number: CXB SKU: CXB.3K0.2 GTIN: 4045761085480 Manufacturer: KERN Origin: CN Core specifications Weighing range: 3,000 g Readability: 0.2 g Counting resolution: 30,000 points Display digit height: 18 mm Display type: LCD Weighing area: 300×225 mm Housing dimensions: 300×330×110 mm Weight: 4 kg Power supply: 220–240 V AC, 50 Hz Battery charge time: 8 h Reproducibility: 0.2 g Linearity: ±0.4 g Operating temperature: -10°C–40°C Max ambient humidity: 85% Features & applications Weighing plate material: stainless steel Weighing system: strain gauge Two operating modes: counting and weighing Fill-to-target with acoustic and optical signal Automatic reference optimisation for improved average weight PRE-TARE function for known container weight 10 memory slots for reference weights Sum memory for cumulative counts and total weight Integrated ESD protection for plastic small parts Adapter included: EURO Typical applications: warehouse logistics, packaging, retail, inventory, order picking FAQ Is the scale suitable for legal-for-trade use? The weight display on the KERN CXB 3K0.2 is calibratable, providing the option to meet legal verification requirements where applicable; check local regulations for certification needs. How small can the counted parts be for accurate results? Laboratory conditions allow counting down to about 100 mg per piece, while normal operational conditions typically ensure reliable counts from around 1 g per piece with the CXB.3K0.2. Can the scale handle sensitive plastic components? Yes, the integrated ESD protection makes the instrument suitable for weighing many plastic small parts without static-related issues. How does the fill-to-target function operate? The fill-to-target function permits programming a target piece count or weight; the device signals attainment via an acoustic and optical alert, enabling precise batch filling. Which environments and applications suit this counting scale? The instrument is intended for warehouse logistics, packaging lines, retail stocktaking, order picking and general counting applications where reliable piece counting and easy handling are priorities. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp: +49 170 2837271

Take advantage of the combination of long-range reach, low-deflection carbon fibre construction and robust IP65 protection for reproducible measurements on large components; order the Digital Uni. Caliper M217.362 directly via Metav Werkzeuge or ask our consultants if needed. Digital Universal Caliper M217.362 — 1,500 mm carbon fibre, IP65 The Digital Universal Caliper M217.362 is a long-range, inductive workshop caliper designed for reliable measurements of large assemblies and tooling up to 1,500 mm. Carbon fibre 1,500 mm beam for low deflection IP65 dust- and splash-resistant design Inductive measuring system with RB6 data output Removable jaw and spring-loaded thumbwheel Reproducible measurements across long spans This long-range instrument is engineered for measurements up to 1,500 mm, placing it in the Long category for calipers. The inductive measuring system provides stable sensing along the entire beam, reducing the influence of contamination that affects mechanical readers. With a display resolution of 0.01 mm, operators gain clear, comparable values for external and internal dimensions on large components; this supports process consistency in fixtures, housings and large assemblies where repeatability matters. Lightweight stiffness and workshop resilience The beam is manufactured from carbon fibre, which combines low mass with high stiffness to limit sag over the full measuring length. Together with the IP65 rating, this construction means the instrument tolerates workshop environments while remaining easy to handle during two-person measurements or when mounted on supports. A removable jaw allows replacement or specialised jaw types, and the spring-loaded thumbwheel ensures gentle, consistent closing force to cut measurement variation caused by operator pressure. Clear results and industrial connectivity The caliper’s digital display supports mm/inch, Hold, Set, On/Off, 0/Inch and Data functions for versatile use; the 0.01 mm step size ensures readable resolution for workshop quality checks. Data are made available via RB6 output for direct logging into inspection systems or data collectors, while power is supplied by a 3 V CR 2032 cell for long service life between battery changes. Delivered in a transport case, the instrument is protected during storage and transfer, simplifying workshop logistics. Choose Metav IndustryLine’s carbon-fibre long caliper for consistent, low-deflection measurements over large parts — contact Metav Werkzeuge in Emmerich for personalised advice or to request a quote. Technical data Article number: M217.362 GTIN: 4054469183220 ECLASS: 21170344 Facts Measuring range: 0–1,500 mm Resolution (display): 0.01 mm Accuracy: 0.11 mm Jaw length: 100 mm Power supply: 3 V CR 2032 Special features Material: carbon fibre beam Protection: IP65 Measuring system: inductive Data output: RB6 Display functions: mm/inch, Hold, Set, On/Off, 0/Inch, Data Removable measuring jaw Spring-loaded thumbwheel Delivered in transport case FAQ What measuring range does the caliper cover? The Digital Universal Caliper M217.362 covers 0–1,500 mm and is classified as a long-range caliper suitable for large components and tooling. Is the instrument suitable for workshop use and humid environments? Yes — the carbon fibre beam combined with an IP65 rating provides resistance to dust and splashes, making it appropriate for standard workshop conditions. How can measurement data be transferred to a PC or logger? Data are exported via the RB6 output; the caliper uses an inductive measuring system that supports reliable digital transfer to compatible data collectors. Which display functions are provided for everyday measuring tasks? The instrument includes mm/inch switching, Hold, Set, On/Off, 0/Inch and Data buttons for flexible operation, with a display resolution of 0.01 mm; it is powered by a 3 V CR 2032 battery. Can the measuring jaw be replaced or adapted for special tasks? Yes, the product features a removable measuring jaw and a spring-loaded thumbwheel to enable jaw replacement and to ensure consistent contact force during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Microtech Metrology steht exemplarisch für "Industrie 4.0" in der ukrainischen Messtechnik-Branche. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Telefon: +49 2822 7131930 Informationen zur technischen Ausstattung zumdigitale Höhenmess- und Anreißgerät von Microtech Metrology: Marke: Microtech Metrology Bezeichnung: Höhenmess- und Anreißgerät Bestellnummer: 144315262 Fakten: Messbereich: 0 bis 1500mm Ablesung: 0,01mm Datenausgang: Wireless+USB Genauigkeit: 0,06mm mit ISO 17025 Kalibrierzertifikat Messkraft: 1-20N Ausführungen Ausführung: digital Material: Fuß aus Gusseisen Digitalanzeige: Color 2.4" Touchscreen mit Tablet Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com

Die Kombination aus 1500 mm Messbereich, Wireless+USB Datenausgang und Schutzart IP54 liefert flexible, direkt übertragbare Messwerte für großformatige Bauteile und den rauen Werkstattalltag. Bestellen Sie den Einbaumessschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Einbaumessschieber — Digitaler Messschieber 0–1500 mm von Microtech Metrology Der Einbaumessschieber bietet einen langreichweitigen, digitalen Messaufbau für präzise Längenmessungen an großen Bauteilen und erleichtert die Datenerfassung im Produktionsumfeld. Einbaumessschieber von Microtech Metrology 1.500 mm Messbereich für große Bauteile Wireless+USB Datenausgang für direkte Übertragung Farb-Touchdisplay 2,4" für einfache Bedienung Schutzart IP54 für Werkstattumgebung Lange Reichweite für großformatige Bauteile und reproduzierbare Messergebnisse Der Messschieber gehört zur Lang-Klasse und deckt den Messbereich bis 1.500 mm ab, wodurch er speziell für große Spannmittel, Gehäuse und Vorrichtungen geeignet ist. Die ausgedehnte Reichweite erlaubt Messungen ohne wiederholtes Umsetzen, was Zeit spart und Fehlerquellen reduziert. Durch die konstruktive Auslegung bleibt die Führung steif genug, um über die gesamte Länge reproduzierbare Werte zu liefern. Vernetzte Datenerfassung und intuitive Bedienung für effiziente Abläufe Die kombinierte Wireless+USB Schnittstelle ermöglicht sowohl kabellose Übertragung als auch direkte Verbindung zum Rechner, so dass Messergebnisse sofort in digitale Prüfprotokolle übernommen werden können. Das Color 2,4" Touchscreen Display erleichtert die Eingabe und Ablesung, während die Auflösung von 0,01 mm feine Differenzen sichtbar macht. Die angegebene Genauigkeit ±0,05 mm bietet ausreichend Präzision für viele Fertigungs‑ und Kontrollaufgaben. Robuste Ausführung und Umweltschutz für den Einsatz in Werkstätten Mit Schutzart IP54 (Spritzwasser‑ und Staubschutz) ist das Gerät gegen typische Werkstattbedingungen gewappnet und bleibt zuverlässig im rauen Alltag. Die integrierte 10x Vergrößerung unterstützt das exakte Ablesen, besonders bei feinen Skalierungen oder schwierigen Lichtverhältnissen. Diese Kombination aus Schutz und Bedienkomfort sorgt für geringe Ausfallzeiten und lange Nutzungsdauer. Zielgruppenorientierung: Wer profitiert am meisten von diesem Messmittel Konzipiert wurde der Schieber für Werkstätten, Produktionslinien und den Vorrichtungsbau, in denen große Bauteile geprüft werden. Fertigungsleiter und Qualitätsprüfer profitieren von der Reichweite und den vernetzten Exportmöglichkeiten, während Wartungs‑ und Montagepersonal die robuste Ausführung und die einfache Ablesbarkeit schätzt. Für Anwendungen, die eine Genauigkeit von ±0,05 mm erfordern, stellt dieses Messgerät eine praktikable, wirtschaftliche Lösung dar. Bestellen Sie den Einbaumessschieber von Microtech Metrology direkt bei Metav Werkzeuge und sichern Sie sich vernetzte Messdaten mit 1.500 mm Reichweite — bei Fragen erreichen Sie die Beratung per E‑Mail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 142515156 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber GTIN: 4061905459917 Fakten Messbereich: 0–1500 mm Ablesung: 0,01 mm Genauigkeit: ±0,05 mm Messbereich min.: 0 mm Besonderheiten Datenausgang: Wireless+USB — kabellose und kabelgebundene Datenübertragung Digital Anzeige: Color 2,4" Touchscreen — Farbdisplay, Touchbedienung Vergrößerung: 10x — Lupe zur erleichterten Ablesung IP Schutz: IP54 — Spritzwasser‑ und Staubschutz ECLASS: 21170344 FAQ Wie groß ist der maximale Messbereich dieses Messgeräts? Der Messbereich des Einbaumessschiebers von Microtech Metrology reicht bis 1.500 mm, wodurch das Gerät für großformatige Messaufgaben in Werkstatt und Produktion ausgelegt ist. Welche Genauigkeit kann ich im Messalltag erwarten? Der Einbaumessschieber liefert eine angegebene Genauigkeit von ±0,05 mm bei einer Ablesung von 0,01 mm, was ihn für viele Fertigungs‑ und Prüfprozesse tauglich macht. Wie werden Messergebnisse übertragen und protokolliert? Das Modell bietet Wireless+USB Schnittstellen, so dass Messergebnisse drahtlos oder per Kabel direkt an Prüfsoftware oder Datenerfassungsgeräte übergeben werden können. Eignet sich das Gerät für den rauen Werkstattbetrieb? Ja, die Schutzart IP54 schützt gegen Spritzwasser und begrenzte Staubbelastung, was den Einsatz in typischen Werkstattumgebungen ermöglicht. Ist die Ablesung auch bei schlechten Lichtverhältnissen möglich? Die Kombination aus 2,4" Farb‑Touchdisplay und 10x Vergrößerung erleichtert das Ablesen auch unter schwierigen Lichtbedingungen und unterstützt präzise Messergebnisse. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Das Höhenmess- und Anreißgerät verbindet einen großen Messbereich 0–1500 mm mit ISO 17025-Kalibrierung und flexiblen Datenschnittstellen, sodass zuverlässige Messergebnisse und einfache Datenübertragung Hand in Hand gehen. Bestellen Sie das Höhenmess- und Anreißgerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Höhenmess- und Anreißgerät Das Höhenmess- und Anreißgerät ist ein digitales Messgerät für präzise Höhen- und Anreißarbeiten sowie die einfache Datenerfassung per Wireless und USB integriertes Touchscreen Display 2,4 Zoll Messbereich 0–1500 mm für große Bauteile Datenausgang Wireless und USB Lieferung mit ISO 17025 Kalibrierzeugnis Präzision und Reichweite für großformatige Bauteile Das Gerät wurde für Anwendungen konzipiert, die über die typische Werkstattlänge hinausgehen: Mit dem Messbereich 0–1500 mm entspricht es der Kategorie Lang, die gezielt für Messaufgaben ab etwa einem Meter Reichweite optimiert ist. Die angegebene Genauigkeit 0,06 mm liefert reproduzierbare Ergebnisse bei kontrollierten Messabläufen. Dank der feinfühligen Ablesung von 0,01 mm lassen sich Toleranzen sicher dokumentieren, ohne auf sperrige Speziallösungen zurückgreifen zu müssen. Einfache Bedienung und nahtlose Datenübertragung Das Color 2.4" Touchscreen Display bietet eine intuitive Benutzerführung und beschleunigt Routineabläufe bei der Messung. Die Kombination aus Wireless-Übertragung und USB-Schnittstelle erlaubt direkte Datenübergabe an Auswertesysteme oder Fertigungssoftware, was Nacharbeit reduziert und Messprotokolle automatisiert. Bediener profitieren von schnellem Workflow und klaren Anzeigen, die den Arbeitsprozess sicherer und effizienter machen. Kalibrierung, Lieferumfang und typische Anwendungsbereiche Das Werkzeug wird vollständig kalibriert ausgeliefert; die Kalibrierung erfolgte nach ISO 17025 und ein Kalibrierzeugnis liegt bei. Damit ist das Gerät unmittelbar einsatzbereit für Qualitätskontrolle, Formenbau und Vorrichtungsfertigung. Die robuste Konstruktion eignet sich für die Werkstatt und den Prüfraum gleichermaßen, da der Anwender auf ein lückenlos dokumentiertes Messergebnis zurückgreifen kann. Empfehlung: Für präzise Langmessungen die Microtech Metrology-Lösung mit ISO 17025-Kalibrierung wählen; bei Fragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 144315260 Marke: Microtech Metrology Bezeichnung: Höhenmess- und Anreißgerät GTIN: 4061905456244 Fakten Messbereich: 0–1500 mm Genauigkeit: 0,06 mm Ablesung: 0,01 mm Besonderheiten Digitalanzeige: Color 2.4" Touchscreen Datenausgang: Wireless, USB Kalibriert nach ISO 17025: Kalibrierzeugnis wird mitgeliefert Messkraft: Keine FAQ Ist das Gerät kalibriert ausgeliefert? Ja, das Höhenmess- und Anreißgerät von Microtech Metrology wird vollständig kalibriert ausgeliefert; die Kalibrierung erfolgte nach ISO 17025 und das Kalibrierzeugnis liegt bei. Welche Schnittstellen stehen zur Datenerfassung bereit? Das Messgerät bietet Wireless-Übertragung und USB-Anschluss für die einfache Übergabe von Messwerten an Auswerte-Software oder Datenerfassungssysteme. Für welche Anwendungen ist dieses Messgerät besonders geeignet? Das Gerät eignet sich für die Qualitätskontrolle, Formenbau und Vorrichtungsfertigung, speziell bei Bauteilen, die einen Messbereich 0–1500 mm erfordern. Wie genau sind die Messergebnisse? Die Spezifikation nennt eine Genauigkeit von 0,06 mm bei einer Ablesung von 0,01 mm, was reproduzierbare Ergebnisse im industriellen Alltag ermöglicht. Wer ist Hersteller und welche Artikelnummer hat das Gerät? Hersteller ist Microtech Metrology; die Artikelnummer lautet 144315260. Hersteller: Microtech Metrology; Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools

Nutzen Sie die Kombination aus großer Reichweite, schneller Datenschnittstelle und intuitivem Touchscreen für präzise und dokumentierte Messabläufe. Bestellen Sie den Messschieber von Microtech Metrology direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber von Microtech Metrology (Digitaler Langmessschieber) Der Messschieber ist ein digitaler Langschieber für großformatige Messaufgaben in Werkstatt und Produktion mit Color‑Touchscreen und Wireless+USB‑Datenübertragung. Digitaler Langschieber für Messbereiche bis 2.000 mm Color 2,4" Touchscreen für einfache Bedienung Wireless und USB für schnelle Datenerfassung Ablesung 0,01 mm für praxisnahe Genauigkeit Schnabellänge 250+150 mm für flexible Messungen Große Reichweite für effiziente Messprozesse Der Messschieber bietet einen Messbereich von 1.500 bis 2.000 mm und fällt damit in die Klasse Lang, die speziell für großformatige Bauteile konzipiert ist. Diese Reichweite reduziert Rüst‑ und Umbauzeiten, weil weniger Messvorgänge und Anschläge nötig sind. Für Anwender in der Rohr‑ und Behälterbearbeitung, im Vorrichtungsbau oder bei langen Wellen bedeutet das: weniger Handlinge, schnellere Dokumentation und höhere Durchsatzraten. Die Kombination aus Reichweite und stabiler Führung sorgt für konsistente Ergebnisse über die gesamte Messlänge. Intuitive Bedienung und direkte Ergebnissicherung Die Color 2,4" Touchscreen‑Anzeige macht Messabläufe schneller und weniger fehleranfällig, weil Parameter direkt eingestellt und Ergebnisse sofort visuell geprüft werden können. Die Wireless+USB‑Schnittstelle ermöglicht eine nahtlose Übertragung der Messwerte in Prüfprotokolle und Messsoftware, wodurch manuelle Übertragungsfehler entfallen. Mit einer Ablesung von 0,01 mm entspricht das Gerät praxisnahen Anforderungen in Fertigung und Qualitätssicherung und erleichtert die Integration in digitale Workflows. Robuste Backengeometrie und praktische Aufnahmen Die konstruktion mit Schnabellänge 250+150 mm bietet flexible Einsatzmöglichkeiten für Innen‑ und Außenmessungen sowie Stufenmessungen. Das Gerät ist für Messungen an Bauteilen ausgelegt, bei denen große Spannweiten erforderlich sind; als Beispiel sind Messungen von Löchern bis 460 mm Durchmesser möglich. Durch die robuste Bauweise bleiben Messflanken stabil, was die Reproduzierbarkeit von Ergebnissen verbessert und die Lebensdauer des Messgeräts erhöht. Zielgruppenorientierte Einsatzempfehlung Dieses Messgerät richtet sich an Anwender in Industrie, Handwerk und Laboren, die lange Messwege mit digitaler Dokumentation kombinieren müssen. Qualitätsverantwortliche profitieren von der schnellen Datenerfassung, Werkstattmeister von der Zeitersparnis bei wiederkehrenden Messaufgaben. Die einfache Bedienung reduziert Einarbeitungszeiten, sodass auch wechselnde Bediener schnell zuverlässige Ergebnisse erzielen können. Empfehlung: Für reproduzierbare Langmessungen wählen Sie den Microtech Metrology Messschieber mit Wireless+USB und Color‑Touchscreen – bei Metav Werkzeuge erhalten Sie fachliche Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 141851207 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905082139 Fakten Messbereich: 1.500–2.000 mm Genauigkeit: 0,055 mm Ablesung: 0,01 mm Ablesung in Inch: 0,0001 Besonderheiten Digitales Display: Color 2,4" Touchscreen Datenausgang: Wireless+USB (kabellose und kabelgebundene Datenübertragung) Schnabellänge: 250+150 mm Geeignet für: Löcher bis 460 mm Durchmesser Digital: Elektronische Anzeige und Datenausgabe FAQ Wie groß ist der Messbereich dieses Geräts? Der Messbereich liegt bei 1.500–2.000 mm, sodass der Microtech Metrology Messschieber (SKU 141851207) besonders für großmaßige Bauteile und lange Messwege geeignet ist. Welche Genauigkeit kann ich erwarten? Die Genauigkeit beträgt 0,055 mm, kombiniert mit einer Ablesung von 0,01 mm; das macht den Messschieber (Microtech Metrology Messschieber, SKU 141851207) tauglich für praxisnahe Qualitätskontrollen an größeren Werkstücken. Wie werden Messwerte übertragen? Messwerte lassen sich über Wireless+USB direkt vom Microtech Metrology Messschieber (SKU 141851207) an PC oder Messsoftware übertragen, was die Dokumentation vereinfacht. Für welche Anwendungen ist das Gerät besonders geeignet? Der Messschieber ist ideal für Vorrichtungs‑ und Formenbau, Rohr‑ und Behältermessungen sowie Werkstattprüfungen, wenn lange Messungen und digitale Protokollierung erforderlich sind. Hersteller: Microtech Metrology; Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Kombinieren Sie die Genauigkeit 0,03 mm, die robuste Shock proof Bauart und die ISO 17025 Kalibrierung für reproduzierbare Messwerte. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber – Analoger Nonius für präzise Werkstattmessungen Der Messschieber ist ein analoger Nonius‑Messschieber für Außen-, Innen‑ und Tiefenmessungen im Maschinenbau und in der Werkstatt. Messgenauigkeit 0,03 mm Robuste Shock proof Bauart ISO 17025 Kalibrierung inklusive Tiefenmaßfunktion für präzise Tiefe Messbereich 0–150 mm Standardlänge Präzision und Ablesekomfort für reproduzierbare Prüfungen Der analoge Nonius dieses Werkzeugs liefert eine Genauigkeit von 0,03 mm und eine Ablesung von 0,01 mm, wodurch sich engere Toleranzen sicher prüfen lassen. Die mechanische Konstruktion ist auf Stabilität ausgelegt, sodass wiederholbare Messwerte auch bei regelmäßiger Nutzung erzielt werden. Für Anwender bedeutet das weniger Nacharbeit und eine höhere Prozesssicherheit bei Fertigungs‑ und Montagekontrollen. Robuste Bauweise und Tiefenmaß für vielseitige Aufgaben Die Shock proof Konstruktion schützt das Messwerk bei rauer Handhabung und erhöht die Lebensdauer unter Werkstattbedingungen. Die integrierte Tiefenmaßfunktion erweitert den Einsatzbereich auf Bohrungs‑ und Taschenmessungen, ohne zusätzliches Spezialwerkzeug. Diese Kombination reduziert Stillstandzeiten und vereinfacht serielle Kontrollen an Bauteilen. Standard‑Messbereich optimal für Werkstatt und Maschinenbau Mit einem Messbereich von 0–150 mm fällt das Modell in die Kategorie Standard, die das beste Verhältnis aus Reichweite und Handhabung bietet. Standardlängen wie 150 mm sind die universelle Basis für den Maschinen‑ und Metallbau: Sie erlauben präzise Kontrollen von Bauteilen, Spannmitteln und Werkstückansichten bei einfacher Einhandbedienung. Kalibrierung, Dokumentation und Einsatzsicherheit Das Werkzeug wird vollständig kalibriert ausgeliefert; die ISO 17025 Kalibrierung und das zugehörige Kalibrierzeugnis liegen bei, sodass Messprotokolle direkt in Qualitätssicherungsprozesse übernommen werden können. Damit eignet sich das Messmittel für Prüfplätze, Wareneingangskontrollen und Rückverfolgbarkeitsanforderungen in der Fertigung. Als Empfehlung für Qualitätsprüfungen empfehlen wir den Einsatz des Microtech Metrology Messschiebers mit ISO 17025 Kalibrierung — bestellen Sie bequem über Metav Werkzeuge und kontaktieren Sie den technischen Vertrieb per E‑Mail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 für individuelle Beratung Produktmerkmale Artikelnummer: 141011150 Marke: Microtech Metrology GTIN: 4061905451430 ECLASS: 21170344 Daten Messbereich: 0–150 mm Genauigkeit: 0,03 mm Ablesung: 0,01 mm Besonderheiten Shock proof Tiefenmaßfunktion Analoger Nonius ISO 17025 Kalibrierung: Kalibrierung, Kalibrierzeugnis FAQ Wie genau ist der Messschieber und wofür eignet sich die Genauigkeit? Der Messschieber von Microtech Metrology (SKU 141011150) bietet eine Genauigkeit von 0,03 mm und eignet sich für präzise Werkstatt‑ und Fertigungsprüfungen, bei denen Reproduzierbarkeit und Nachweisbarkeit gefordert sind. Ist der Messschieber kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird vollständig kalibriert ausgeliefert; die Kalibrierung erfolgte nach ISO 17025 und das zugehörige Kalibrierzeugnis ist im Lieferumfang enthalten. Welche Messarten sind mit dem Messschieber möglich? Das Werkzeug ermöglicht Außen‑, Innen‑ und Tiefenmessungen sowie typische Nonius‑Anwendungen, wodurch es zahlreiche Prüfaufgaben in Werkstatt und Produktion abdeckt. Für welche Anwendergruppen ist dieses Modell besonders geeignet? Der analoge Messschieber richtet sich an Werkstätten, Qualitätskontrolleure und Maschinenbauer, die eine robuste, kalibrierte Lösung für routinemäßige Messaufgaben benötigen. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Take advantage of Industry 4.0 connectivity and force‑controlled measurement for reproducible results, combined with a Swiss reading system and an ISO 17025 calibration certificate for traceable quality — order the caliper via Metav Werkzeuge or ask Metav's consultants for integration support. DataMet eFORCE caliper — force‑controlled precision (1–20 N) with 0.0005 mm resolution by Microtech Metrology The DataMet eFORCE caliper is an Industry‑ready electronic caliper for workshop and QC use, combining a Swiss high‑resolution measuring system with force control and wireless data transfer for efficient measurement workflows Industry 4.0-ready Wireless data transfer Force-controlled measurement 1–20 N Swiss reading system 0.5 µm resolution ISO 17025 calibration certificate included Precision and repeatability that reduce rework The caliper pairs a Swiss reading system with an ultra‑fine 0.0005 mm resolution to deliver consistently detailed readings. Integrated E‑Force measurement control (selectable 1–20 N and AUTO‑Force) removes a major source of variability by stabilising contact force, which improves repeatability and reduces operator‑dependent scatter. With a stated accuracy ±0.005 mm, the instrument is suitable for demanding workshop metrology and routine quality checks where tight tolerances are required. Seamless data flow for modern production Connectivity is designed for practical integration: both Wireless transfer to the MDS app and USB HID emulation (including MAC support) allow measured values to be captured directly in spreadsheets and inspection software. A built‑in memory manager stores 2000 values with folder structure and statistics, and the hi‑res 2.0" colour touchscreen gives clear visual feedback. Combined, these functions speed up documentation, reduce transcription errors and support Industry 4.0 data routines on the shop floor. Robust construction for everyday use Constructed from stainless steel with hand‑finished measuring faces and a surface finish of Ra<0.32 µm, the caliper withstands daily workshop handling while maintaining surface quality at contact points. The instrument falls into the Standard (100–300 mm) category thanks to its 0–150 mm measuring range, offering the best compromise between reach and rigidity for general machine‑shop and metalworking tasks. Power is provided by a rechargeable Li‑Pol 500 mAh cell with a USB‑C data/charging port for convenient top‑ups between shifts. Traceability, calibration and measurement integrity A full ISO 17025 calibration certificate (Ilac MRA) is included, supplied with the delivery set so that the measuring instrument can be introduced into documented inspection routines straight away. The caliper supports linear correction and temperature correction, and external jaw accuracy plus internal‑jaw and depth verification reference the ISO13385‑1 standard, enabling integration into formal QA processes with documented traceability. For detailed technical advice or to place an order for the Microtech Metrology DataMet eFORCE caliper contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 — Metav's specialists will assist with specification and delivery. Technical Data Article number: 141088015A Product name: DataMet eFORCE caliper 0–150 mm Manufacturer: Microtech Metrology Delivery set: Messwerkzeug; Free Versions of MDS App; USB Data/Charging Cable; Calibration Protocoll Calibration: ISO 17025 (Ilac MRA) certificate included Numbers Measurement range: 0–150 mm Resolution: 0.0005 mm (0.5 µm) Accuracy: 0.005 mm Force selection: 1–20 N Battery capacity: 500 mAh Jaw lengths: 40/16 mm Memory capacity: 2000 values Special features Industry 4.0 DataMet E‑Force system 2.0" colour touchscreen Swiss-made reading system Functions: Analog Scale; Preset; Graphic; Go/NoGo; Max/Min; Formula; Timer; Linear correction; Temperature correction; Resolution select; Connection indication Memory manager with folders, statistics, data transfer Wireless to MDS app; Wireless HID; USB HID (MAC support) Stainless steel; hand-finished measuring surfaces Ra<0.32 µm Rechargeable Li‑Pol battery; USB‑C socket External jaws accuracy; internal jaws and depth per ISO13385‑1 FAQ What measurement range and resolution does the instrument offer? The caliper measures from 0–150 mm with a selectable 0.0005 mm (0.5 µm) resolution; this is specified for the Microtech Metrology DataMet eFORCE caliper (SKU 141088015A). How does the E‑Force module improve repeatability? E‑Force sets and displays a controlled measuring force (1–20 N) and includes an AUTO‑Force mode, which standardises contact pressure and reduces variability in repeated measurements with the DataMet eFORCE caliper. Which data transfer options are provided for recording measurements? DataMet eFORCE supports Wireless transfer to the MDS app, Wireless HID keyboard emulation, and USB HID (including MAC compatibility); the device also provides USB‑C for data and charging. Is the caliper delivered calibrated and traceable? Yes — the delivery includes an ISO 17025 calibration certificate (Ilac MRA) and a calibration protocoll, enabling immediate inclusion in traceable QA workflows. For which applications is this caliper best suited? With its Standard range (0–150 mm), stainless steel construction and high resolution, the instrument is ideal for machine‑shop inspection, component measurement and laboratory quality control where reproducible, traceable results are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Benefit from dependable 0.05 mm resolution, robust stainless steel construction and an interchangeable measuring rod that adapts to varied depth tasks; order the depth gauge directly via Metav Werkzeuge or consult our specialists for further technical advice. Depth Gauge with Interchangeable Pin Tip M204.063 — 0–150 mm, 0.05 mm Vernier (Metav IndustryLine) The Depth Gauge with Interchangeable Pin Tip M204.063 is an analogue depth gauge designed for standard workshop and machine‑shop depth measurements up to 150 mm, offering a compact, durable solution for precise recess and bore depth checks. 0.05 mm vernier resolution Stainless steel, matt‑chrome scale Interchangeable measuring rod and pin tip Supplied in a transport case Precise depth control for everyday production This analogue instrument delivers a clear metrological advantage through its 0.05 mm vernier, derived from the 1/20 mm nonius. The fine gradation allows repeatable depth readings that meet common workshop tolerances while remaining simple to interpret without electronics. The design combines a rigid depth beam with a slim measuring pin, enabling access to narrow recesses and stepped features. Compliance with DIN 862 guarantees that the gauge matches established mechanical‑engineering standards and fits seamlessly into established inspection routines. Robust handling and corrosion resistance Constructed from stainless steel with a matt‑chrome scale and vernier, the instrument resists workshop contaminants and reduces surface glare for easier reading under workshop lighting. The interchangeable measuring rod and pin tip provide practical adaptability: the rod can be repositioned for different depths or replaced if damaged, avoiding the need for a full tool swap. At around 0.2 kg, the gauge is light enough for single‑hand use yet stiff enough to ensure stable measurements within its standard range. Designed for the workshop: classification and use case With a measuring span to 150 mm, the device falls into the Standard size class (100–300 mm), which is the universal choice for machine shops and metalworking departments thanks to its balanced reach and stiffness. As an analogue vernier instrument, it is particularly useful where electromagnetic interference or battery dependence is a concern, or where a tactile, mechanical feel is preferred for routine quality checks. The measuring kit is supplied ready for use in a transport case, facilitating safe storage and controlled transport between workstations. Specify the Metav IndustryLine depth gauge M204.063 for reliable 0.05 mm depth measurement — contact Metav Werkzeuge in Emmerich for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M204.063 GTIN: 4054469164076 Standard: DIN 862 Type: analogue depth gauge Facts Measuring range: 0–150 mm Resolution (vernier): 0.05 mm Weight: 0.2 kg Tariff code: 90173000 Bridge / beam: 100 mm Special features Stainless steel with scale and vernier, matt‑chrome finish Nonius 1/20 mm (0.05 mm) on lower edge Interchangeable pin tip and measuring rod Standard size class: 100–300 mm Supplied in a transport case FAQ How accurate is the instrument for workshop checks? The depth gauge M204.063 offers a vernier resolution of 0.05 mm, suitable for standard industrial checks and production control within common workshop tolerances. Can the measuring pin be changed for different tasks? Yes, the instrument features an interchangeable measuring rod and pin tip, so the probe can be repositioned or replaced to suit specific depth requirements. Is this gauge suitable for harsh workshop environments? The matt‑chrome finish on stainless steel provides enhanced corrosion resistance and reduces glare, making the gauge robust enough for typical machine‑shop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining 0.02 mm accuracy with IP54 protection and an absolute measuring system provides dependable workshop measurements and consistent quality control; order the instrument directly via Metav Werkzeuge or request advice from our consultants. Digital Caliper 150 mm, IP54 (DIN 862) — Metav IndustryLine The Digital Caliper 150 mm, IP54 (DIN 862) is a compact, workshop-ready absolute caliper for precise external, internal, depth and step measurements in standard machining environments. IP54 protection for dusty and damp environments Absolute measuring system with 0.02 mm accuracy Stainless steel construction with glass scale RB 6 data output for digital integration Robust accuracy for everyday metrology This caliper delivers 0.02 mm accuracy on an absolute measuring system, a combination that gives reliable, repeatable readings across routine inspection tasks. The stainless steel body with a glass scale resists wear while maintaining stable guidance, so measurements remain consistent over time. Built to the DIN 862 standard, the instrument suits general metalworking and maintenance use where a balance of reach and stiffness is required. Clear digital readout and data connectivity The instrument features a digital display with on/off, 0/ABS, mm/inch and Origin controls for intuitive operation. A RB 6 data output permits straightforward connection to data loggers or inspection software, enabling traceable records and faster quality workflows. The display resolution and measurement logic reduce interpretation errors, which speeds up checking procedures and supports process documentation in production environments. Four measurement modes and practical handling Equipped for four-fold measurement (external, internal, depth and step), the caliper replaces several single-purpose gauges, saving bench space and simplifying inspection sequences. The compact 150 mm format is classified in the standard range for workshop calipers, offering an optimal compromise between reach and rigidity that enhances single-hand handling and repeatable results for typical machine‑shop components. Durable protection and transport convenience With IP54 ingress protection and delivery in a protective case, the device withstands workshop conditions and is safer to store and transport between job sites. The lightweight construction (approx. 0.4 kg) and secure jaws reduce operator fatigue during repeated checks, while the battery-powered electronics (3 V CR2032) keep downtime to a minimum. For workshop-ready precision with robust protection, request the Metav IndustryLine Digital Caliper M216.255 from Metav Werkzeuge GmbH or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 for specification support Technical Data Article number: M216.255 GTIN: 4054469182551 Eclass: 21170344 Norm: DIN 862 Facts Measuring range: 0–150 mm Resolution / display: 0.02 mm Accuracy: ±0.02 mm Weight: 0.4 kg Battery: 3 V CR 2032 Protection class: IP54 Special features Material: stainless steel with glass scale Measuring system: Absolute Measurement modes: external, internal, depth, step Data output: RB 6 Digital display functions: ON/OFF, 0/ABS, mm/inch, Origin button Delivered in protective case for transport FAQ Is the caliper suitable for workshop environments with splash and dust? The Digital Caliper 150 mm meets IP54 and is designed for dusty and damp workshop conditions, providing protected operation without compromising accuracy. Can measurement data be exported to inspection software? Yes. The instrument includes a RB 6 data output for direct connection to data loggers or PC systems to streamline record keeping. Which measurement types are possible with this caliper? This caliper supports four measurement tasks: external, internal, depth and step measurements, covering most routine inspection needs. What is the display resolution and typical accuracy? The digital readout displays at 0.02 mm resolution, with an accuracy of ±0.02 mm, suitable for standard machine‑shop quality control. Is the caliper supplied ready for transport and storage? The tool is supplied in a protective case for safe transport and workshop storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of clear large-digit readout, fibreglass lightness, and workshop‑grade 150 mm range for efficient, repeatable checks on everyday components; order directly via Metav Werkzeuge or consult the specialists for application advice. Digital caliper M216.073 by Metav IndustryLine — 150 mm, fibreglass, 0.1 mm resolution Digital caliper M216.073 offers a compact, easy-to-read measuring solution for routine workshop tasks and quality checks across general metalworking and maintenance applications. Fibreglass body, corrosion resistant 150 mm measuring range 0.1 mm digital resolution Large 16 mm high-contrast digits Clear legibility for fast inspection and fewer errors The instrument features a large 16 mm digit height on the display, which significantly reduces reading time in busy production or maintenance environments. Combined with a straightforward digital interface — including ON/OFF, ZERO and mm/inch functions — the device streamlines routine dimension checks. The 0.1 mm resolution positions this caliper for standard workshop accuracy, making it suitable for general machining and assembly tasks where rapid, unambiguous readings are more important than micrometre-level precision. This balance of readability and sufficient accuracy supports quicker decision‑making on the shop floor and reduces the risk of rework caused by misreading small displays. Lightweight fibreglass design that withstands daily use Constructed from fibreglass, the gauge remains exceptionally light (approx. 0.1 kg) while offering good resistance to corrosion and everyday knocks. The material choice lowers operator fatigue during repetitive measuring routines and enables safe use in environments where metal calipers could mark soft surfaces. The instrument’s 150 mm range places it in the standard caliper category, which is the most versatile size for workshops: it combines reach, stiffness and single‑hand handling for measurements on shafts, housings and interfaces commonly encountered in production and repair work. The compact form factor and blister packaging facilitate tidy storage and straightforward distribution within tools cupboards. Practical controls and ergonomic handling to increase throughput Ergonomic jaw geometry with a beak length of 40 mm provides stable contact for external and internal measurements, while the simple digital control scheme reduces training time for new operators. The lightweight slider and intuitive button layout enable swift zeroing and unit changes, improving throughput during repetitive inspection cycles. The caliper is supplied with basic workshop calibration and is targeted at organisations seeking reliable, low‑maintenance tools for standard quality control tasks. Integration into daily workflows is straightforward, and the device complements a broader toolset from Metav IndustryLine for centralised procurement and consistent performance across the shop. For straightforward, readable workshop measurement from Metav IndustryLine, order the M216.073 through Metav Werkzeuge or request tailored application advice by phone or e‑mail — Metav’s specialists in Emmerich are ready to assist. Technical Data Article number: M216.073 GTIN: 4054469182834 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.1 mm Digit height: 16 mm Weight: 0.1 kg Beak length: 40 mm Voltage: 3 V Special features Material: fibreglass Display: ON/OFF, ZERO, mm/inch Packaging: blister pack Suitable category: Standard caliper (100–300 mm range) SKU: M216.073 FAQ Is this caliper suitable for precision workshop checks? The Digital caliper M216.073 delivers 0.1 mm resolution and a 150 mm range, which suits standard workshop and assembly inspections where rapid, reliable readings are required rather than sub‑micrometre measurement. What materials is the caliper designed to cope with? The fibreglass construction of the M216.073 is corrosion resistant and robust for everyday handling; it is appropriate for general metalworking and maintenance tasks but is not intended as a replacement for metrology‑grade instruments on high‑precision materials. Does the display offer both metric and imperial units? Yes, the instrument provides mm/inch conversion via the dedicated display button to support mixed workflows and simplify documentation across projects. Is a calibration certificate included? The tool is supplied with standard workshop calibration suitable for routine quality control. If a higher level of traceable certification is required, Metav Werkzeuge can advise on appropriate calibrated solutions. What power source does the caliper use and how long does it last? The caliper operates from a 3 V cell. Actual service life depends on usage patterns and switch‑off behaviour; the ON/OFF control is provided to preserve battery life during intermittent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine robust ingress protection, a 0.01 mm display resolution and a hardened stainless steel construction for dependable, repeatable measurements on the shop floor; the result is consistent component inspection and fewer reworks. Order the digital caliper directly via Metav Werkzeuge or consult our specialists for application advice and supply options. Digital Caliper 150 mm M216.161.D – IP67 protection, 0.01 mm resolution (Metav IndustryLine) The Digital Caliper 150 mm M216.161.D is a compact, workshop-grade measuring instrument designed for general machining and quality control tasks where resilience and clear readout are essential. IP67 protection against dust and water Hardened stainless steel construction 0.01 mm resolution, ±0.02 mm accuracy Four measuring functions: inner, outer, depth, step Built for wet and dusty workshop conditions The instrument’s IP67 rating ensures reliable operation even where coolant mist, swarf or dust are present; this reduces measurement interruptions and extends service life compared with non-sealed instruments. The frame is made from hardened stainless steel, which provides both corrosion resistance and structural stiffness to keep readings consistent under daily use. Delivered in a transport case, the caliper arrives protected for transit and on-site handling, supporting safe storage between jobs. Accuracy that supports production decisions With a display resolution of 0.01 mm and an accuracy of ±0.02 mm, this caliper meets the expectations of standard precision control in machining and metalworking. The specification follows DIN 862, giving a familiar benchmark for quality assurance. Practically, the resolution and tolerance mean the device is suitable for routine inspection of turned parts, milled components and assembly checks where rapid, verifiable measurements are required rather than sub‑micron laboratory work. Versatile measuring capability and ergonomic handling Equipped for four measuring functions — outer, inner, depth and step — the caliper replaces several single‑purpose gauges and streamlines workflow. The digital display includes tactile buttons (INC, MODE, HOLD and ON/OFF) for straightforward operation, and an automatic shut-off feature preserves the CR2032 battery during intermittent use. The instrument’s jaw length and profile suit common workshop tasks while remaining easy to manipulate for one‑handed measurements. Practical benefits for procurement and daily use Classified in the Standard size group (measurement range to 150 mm), the tool offers the best compromise between reach and rigidity for general workshop needs; typical applications include machine shops, maintenance departments and metal fabrication. The sealed electronics are advantageous where intermittent wetting occurs, and the hardened material minimises wear on contact surfaces for longer service intervals. The result is lower total cost of ownership through fewer replacements and less downtime. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine caliper into your inspection workflow or to arrange delivery from Emmerich: +49 2822 7131930, info@metav-werkzeuge.com Technical Data Article number: M216.161.D GTIN: 4054469182919 Brand: Metav IndustryLine Standard: DIN 862 Facts Measurement range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Weight: 0.4 kg Protection class: IP67 Battery: 3 V CR2032 Special features Material: hardened stainless steel Four measuring functions: outer, inner, depth, step Digital display with INC, MODE, HOLD and ON/OFF buttons Automatic shut-off Delivered in a transport case (plastic or wooden depending on logistics) FAQ What is the usable measurement range of the caliper? The Digital Caliper 150 mm M216.161.D provides a measurement range of 0–150 mm, placing it in the Standard category for workshop use. How precise is the instrument for routine checks? Resolution is 0.01 mm with an accuracy of ±0.02 mm, which is suitable for standard machining tolerances and quality control tasks. Can the caliper be used in damp or dirty environments? Yes, the device has an IP67 rating, meaning the electronics are sealed against dust and temporary immersion, making it robust for harsh workshop conditions. Which measuring tasks does this caliper perform? The caliper supports outer, inner, depth and step measurements, offering four measuring functions that cover most general inspection requirements. Is a calibration certificate supplied with the caliper? A calibration certificate is provided only if explicitly specified; standard factory settings apply unless a particular calibration option is requested at purchase. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust, workshop-ready instrument that combines IP67 protection, a 0.01 mm digital resolution and hardened stainless steel construction for reliable results in everyday quality control. The unit’s 150 mm measuring range and round depth rod (1.6 mm) make it a practical Standard-class caliper for machine shops; order directly via Metav Werkzeuge or consult the Metav team for application advice. Digital caliper 150 mm, IP67 with round depth rod 1.6 mm — Metav IndustryLine The Digital caliper 150 mm, IP67 with round depth rod 1.6 mm is a workshop-grade measuring instrument designed for robust indoor use and precise dimensional checks across machine building and inspection tasks. IP67 protection for dust and water resistance 0.01 mm digital resolution with MODE/SET display Hardened stainless steel construction Four measurement functions: inside, outside, depth, step Consistent accuracy for routine quality control A clear technical advantage of this digital instrument is its 0.01 mm display resolution combined with an indicated measurement accuracy of ±0.03 mm, which aligns with industrial expectations for Standard-range calipers. The 150 mm measuring span places the tool in the Standard category for workshop use, offering a practical balance between reach and rigidity. Compliance with DIN 862 supports reproducible procedures and makes the instrument suitable for incoming inspections, setup checks and day‑to‑day dimensional control where traceable, comparable values are required. Built to withstand the workshop environment The jaws and beam are made from hardened stainless steel, giving the caliper mechanical durability while resisting corrosion in typical production environments. With an IP67 rating, the unit tolerates dust ingress and temporary immersion, reducing the risk of downtime due to contamination or coolant exposure. The slender round depth rod (1.6 mm) permits reliable depth and step measurements in narrow features, while the compact overall weight (approx. 0.4 kg) keeps single‑hand operation comfortable during repetitive measurement tasks. Practical operation and measurement versatility The electronic display features MODE/SET controls for quick unit selection and zeroing, supporting metric and inch readouts (resolution: 0.01 mm / 0.0005 in) and straightforward setup in inspection workflows. The instrument offers four measurement modes — outside, inside, depth and step — which reduces the need to change tools between typical checks. Delivery includes a protective transport case to simplify storage and safe handling between job stations. The overall design emphasises dependable ergonomics and straightforward integration into quality routines. For workshop-grade measurements relying on IP67 protection and precise 0.01 mm readout, choose the Metav IndustryLine digital caliper and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M216.151.N GTIN: 4054469178844 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm (0.0005 in) Indicated accuracy: ±0.03 mm Weight: 0.4 kg Depth rod diameter: 1.6 mm Special features Material: hardened stainless steel Protection class: IP67 Display: digital with MODE and SET buttons Measurement modes: outside, inside, depth, step Conforms to DIN 862 Supplied in protective case for transport and storage FAQ What measurement functions does the caliper provide? The digital caliper supports four measurement functions — outside, inside, depth and step — enabling versatile checks without changing tools. Is the instrument suitable for use near coolants or in dusty environments? Yes, the unit’s IP67 rating ensures resistance to dust ingress and to temporary immersion, making it robust in many workshop conditions. What level of precision can be expected from this 150 mm caliper? The caliper provides a resolution of 0.01 mm with an indicated accuracy of ±0.03 mm, appropriate for standard machine‑shop inspection work. Does the caliper comply with any measurement standards? The instrument is manufactured to meet the requirements of DIN 862, supporting reproducible metrology procedures in the workshop. What materials and features support durability? Construction in hardened stainless steel, a sealed IP67 design and a protective transport case combine to reduce wear and protect the instrument during use and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of a 0.01 mm resolution, robust hardened stainless steel construction and reliable moment locking makes this caliper a practical choice for consistent workshop and inspection routines. Order the instrument directly via Metav Werkzeuge or contact our consultants for integration advice. M216.081 Digital Caliper — 150 mm, moment locking (Metav IndustryLine) The M216.081 is a 150 mm digital caliper designed for workshop measurement and quality control, featuring mm/inch readout, zeroing and a moment locking mechanism for repeatable results 150 mm hardened stainless steel frame Digital readout 0.01 mm resolution mm/inch Moment locking for repeatable measurements Four measurement modes: internal, external, depth, step High-precision measurements that support quality decisions This digital caliper delivers a 0.01 mm resolution and is manufactured to DIN 862 guidance, offering the accuracy expected in standard machine‑shop and inspection tasks. The integrated moment locking holds the slider at the chosen position, reducing variation caused by hand pressure and improving repeatability when transferring measurements between workpiece and documentation. The instrument supports four measurement modes — internal, external, depth and step measurement — enabling a single tool to cover routine dimensional checks without frequent tool changes. These features translate directly into faster inspection loops and fewer reworked parts. Built for everyday workshop robustness and handling Constructed from hardened stainless steel, the caliper tolerates workshop environments while resisting corrosion for long service life. The jaw geometry (40/21 mm) provides sturdy contact for both outside and inside measurements, and the instrument’s compact mass of 0.48 kg keeps handling comfortable during extended use. The balanced weight and ergonomic slider ensure steady alignment on longer runs, helping to preserve measurement integrity across batches. This combination of durability and practical ergonomics reduces maintenance overhead and keeps the tool available where it is needed most. Digital connectivity and error‑reducing workflow benefits The instrument features a clear digital readout with on/off, zero and mm/inch switching for straightforward operation and quick unit conversion. A dedicated RB 1 data output allows transfer of measured values into data‑collection systems or SPC software, cutting transcription errors and accelerating reporting. For laboratories and production lines that require traceable records, the ability to export readings directly from the caliper supports consistent documentation. Integrated digital functionality therefore not only speeds measurement tasks but also strengthens process reliability across inspection and production workflows. Contact Metav Werkzeuge for a tailored quotation or technical guidance on the M216.081; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M216.081 GTIN: 4054469168371 Manufacturer: Metav IndustryLine Norm: DIN 862 Data output: RB 1 Facts Measurement range: 0–150 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Weight: 0.48 kg Jaw length: 40/21 mm Tariff number: 90173000 Special features Material: hardened stainless steel Display: on/off, zero, mm/inch Measurement modes: internal, external, depth, step Moment locking mechanism Digital instrument with data output RB 1 FAQ What accuracy can be expected from this caliper? The M216.081 digital caliper provides a resolution of 0.01 mm and is manufactured to DIN 862, delivering the repeatability and accuracy suitable for workshop quality control. Which measurement types are supported? The instrument supports four measurement modes: external and internal diameters, depth measurement and step measurement, enabling versatile inspection tasks with a single tool. Is the caliper suitable for wet or oily workshop environments? Yes, the hardened stainless steel construction improves resistance to corrosion and wear, making it appropriate for typical workshop conditions where moisture or light contaminants may be present. Can measurement values be exported to a PC or SPC system? Yes, the caliper includes an RB 1 data output that allows direct transfer of readings into data acquisition or SPC software, reducing manual transcription and supporting traceable records. Does the instrument include a locking mechanism for consistent readings? The M216.081 features a moment locking device that secures the slider position, improving repeatability when taking or transferring measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of high-resolution measurement, a responsive 2.4" colour touchscreen and flexible wireless and USB data export to keep quality control reliable and traceable; order the instrument directly via Metav Werkzeuge or consult our specialists for system integration. Digital Dial Gauge — 0–150 mm range with 2.4" colour touchscreen (Microtech Metrology) Digital Dial Gauge 0–150 mm, designed for precise shop-floor and inspection use, offers fast readings and modern data transfer for seamless process control 0–150 mm measuring range 2.4" colour touchscreen display Wireless and USB data output High reading resolution 0.0001 mm Precision that supports process control A measurement device with a 0–150 mm span and a resolution of 0.0001 mm delivers the repeatability required in production and incoming inspection. The instrument’s stated accuracy of ±0.008 mm positions it for fine tolerance checks where small deviations matter; the specified measurement force 3.2–5.2 N contributes to repeatable contact conditions and reduces variation caused by manual probing. These technical values translate into fewer rejected parts and more consistent process data when control limits are tight. Effortless data capture and traceability Integrated Wireless and USB outputs enable direct transfer of readings into inspection routines, SPC software or batch reports, removing error-prone manual transcription. The 2.4" colour touchscreen provides immediate visual confirmation of live values and simple menu navigation, which accelerates measurement cycles and shortens training time for new operators. The digital readout combined with reliable data transfer supports fast decision-making and smoother documentation for audit trails. Designed for repeatable measurements on the shop floor The compact, digital construction focusses on robust handling and clear legibility in workshop conditions. Ergonomic controls and a bright display reduce operator strain and make subsequent checks faster; the stable measurement force range helps to maintain reproducible contact across many cycles. Supplied by Microtech Metrology, this dial gauge suits routine in-process checks as well as quality-lab spot verifications, offering a practical link between bench inspection and digital quality management. Contact Metav Werkzeuge today to discuss integration options or request a tailored quotation for the Microtech Metrology digital dial gauge (SKU 120139505M) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 120139505M GTIN: 4061905453533 ECLASS: 21170308 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution (display): 0.0001 mm Accuracy: ±0.008 mm Display: 2.4" colour touchscreen Measurement force: 3.2–5.2 N Data output: Wireless, USB Special features Digital dial gauge design Colour touchscreen interface Wireless and USB connectivity Suitable for production and inspection tasks Category: Dial gauge (dial indicator) FAQ What measuring range does the instrument cover? The digital dial gauge covers a measuring range of 0–150 mm, suitable for standard workshop and inspection tasks. What accuracy and resolution can be expected? The device offers an accuracy of ±0.008 mm with a display resolution of 0.0001 mm, which supports fine tolerance checks in quality control. How are readings exported for documentation? Readings are exported via Wireless and USB interfaces; the Microtech Metrology dial gauge (SKU 120139505M) is configured for direct transfer into data-collection or SPC systems. Is the display suitable for busy shop-floor conditions? Yes; the 2.4" colour touchscreen provides clear visibility and intuitive navigation, aiding rapid checks even under challenging workshop lighting. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Der 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem überzeugenden Preis. Das wichtigste auf einen Blick waagerecht Messbereich: bis 150mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 MESSBEREICH} mm – von der Vorbereitung bis zur Freigabe Der Messbereich 0 – 150mm bringt die nötige Reichweite für typische Bauteile auf den Punkt. Prüfungen gelingen direkt am Werkstück, auch wenn Formen variieren. Im allgemeinen Maschinen- und Metallbau sorgt dieser Bereich für eine sichere Orientierung über den gesamten Prozess. Die Ergebnisse bleiben nachvollziehbar und konsistent. Das reduziert Nacharbeit und unterstützt saubere Übergaben zwischen Arbeitsschritten. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Gefertigt nach DIN 862 Unser Messwerkzeug wird streng nach DIN 862 gefertigt. Alle Materialien, Herstellungs- und Kalibrierverfahren entsprechen dieser Norm. So stellen wir Maßhaltigkeit, Wiederholgenauigkeit und internationale Vergleichbarkeit sicher. DIN-konforme Prüfzertifikate erleichtern Audits, beschleunigen Freigaben und gewährleisten eine konstante Qualität weltweit. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Profis für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sie wissen nicht genau, ob dieses Werkzeug zu Ihrer Anwendung passt? Oder Ihnen fehlen noch wichtige technische Details? Kein Problem! Kontaktieren Sie uns – wir beraten Sie gerne. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Telefon: +49 2822 7131930 Technische Daten: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.354 Zahlen / Fakten: Messbereich: 0-150mm Gewicht: 0,25kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,03mm Länge: 280mm Besonderheiten Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Anzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Die zusätzliche Ausstattung, darunter Datenausgänge und Messkraftkontrollen, erlangt neben der Genauigkeit und dem Messbereich erhebliche Bedeutung. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Außerdem sollte man untersuchen, ob ein kalibrierter Messschieber sinnvoll ist. Man kann die Kalibrierung bei Lieferung vornehmen und aus Gründen der Prozesskontinuität alle 12 Monate erneuern. Pflegehinweis - damit Sie lange etwas von Ihrem Einbaumessschieber von Metav IndustryLine haben: Einbaumessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).