800x500x100mm Anti-Slip Pad for Measuring Plate Frames, Fits Measuring Plate Stands - Filetta
€68.00
Product information "800x500x100mm Anti-Slip Pad for Measuring Plate Frames, Fits Measuring Plate Stands - Filetta"
Take advantage of a stable, low-maintenance anti-slip solution that secures measuring plates while maintaining repeatability in routine inspection tasks; compatible with 800 x 500 x 100 mm plates and supplied by Filetta. Order the anti-slip guard directly via Metav Werkzeuge or ask the consultants for specification support.
Anti-slip guard for measuring plate frames by Filetta — fits 800 x 500 x 100 mm
The anti-slip guard is a retrofit accessory designed to prevent lateral movement of measuring plates and to improve the reliability of measurements on a measuring table.
- Secure anti-slip contact for measuring plates
- Compatible with 800 x 500 x 100 mm plates
- Suitable for measuring table frames
Improved measurement reliability through stable contact
The primary benefit of the anti-slip guard lies in its capacity to reduce micro-movements between the measuring plate and its support. By increasing the friction interface where the plate rests, the accessory improves repeatability of successive measurements and minimises rework caused by shifting parts. For metrology teams and workshop quality control, this translates into fewer measurement rejects and a more predictable inspection workflow. The solution is particularly relevant where plates are handled frequently or where small shifts can exceed tolerance bands.
Practical integration into the measuring table workflow
Designed for use with plates sized 800 x 500 x 100 mm, the guard integrates with common measuring table frames without demanding complex modifications. Installation is straightforward and focuses on mechanical fixing points on the plate frame; thread and mounting details depend on the specific table design. As a result, the measure of effort to retrofit the accessory remains low while the operational gain — stable part positioning on the measuring table — is immediate. The compact form factor keeps the working surface unobstructed and maintains accessibility for standard inspection tools.
Productivity gains and quality assurance advantages
Adopting this anti-slip solution supports faster setup times and a reduction in incidental errors during tactile or optical measurement processes. The emphasis on stable fixturing supports consistent datum alignment and therefore contributes directly to measurement confidence. In a production environment the accessory enhances throughput by lowering the incidence of repeated measurements and by shortening inspection cycles. The supplied SKU MS131.125 identifies the exact item and facilitates procurement and traceability in inventory systems.
Contact Metav Werkzeuge today for Filetta anti-slip guards compatible with 800 x 500 x 100 mm measuring plates — expert ordering assistance and specification advice available by email or phone from Emmerich.
Technical data
- SKU: MS131.125
- Article: Anti-slip guard
- Manufacturer: Filetta
- Category: Measuring table
- Suitable for measuring plates: 800 x 500 x 100 mm
Facts
- Compatible plate dimension: 800 x 500 x 100 mm
- SKU identifier: MS131.125
Special features
- For measuring plate frames
- Anti-slip function for improved repeatability
- Retrofit-friendly design
FAQ
What plate sizes is the anti-slip guard compatible with?
The anti-slip guard is designed for measuring plates with the dimension 800 x 500 x 100 mm and is supplied under SKU MS131.125 by Filetta.
Will the accessory affect the measuring surface or reference points?
No — the anti-slip guard secures the plate to the frame without altering the measuring surface; Filetta designed the unit to maintain existing reference geometry while reducing lateral movement.
Can the anti-slip guard be retrofitted to any measuring table frame?
The guard is intended for standard measuring table frames; compatibility with bespoke fixtures should be checked against the SKU MS131.125 mounting arrangement before installation.
How does the anti-slip guard improve inspection throughput?
By preventing plate movement, the guard increases repeatability and reduces the need for re-measurement, which shortens inspection cycles and supports steadier production yields.
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Geeignet für
Stable, height-adjustable support with anti-tilt locks and three support brackets provides a dependable base for surface plates, improving repeatability in inspection tasks. The adjustable feet with metal caps permit precise levelling on uneven floors. Order via Metav Werkzeuge or consult our specialists for application guidance and supply. Surface Plate Stand MS131.201 — Filetta height-adjustable metrology frame The Surface Plate Stand MS131.201 offers a stable, height-adjustable frame for secure mounting of measuring plates in metrology, inspection and workshop environments. Height-adjustable 900–975 mm overall Anti-tilt safety devices included Three support brackets supplied Adjustable feet with metal caps Engineered for stable, repeatable measurements The stand is designed to deliver stable support for measuring plates, reducing variability in routine inspections. With two selectable overall height ranges (900–925 mm and 950–975 mm, measured including the measuring plate), the frame enables ergonomic working heights and consistent positioning of inspection artefacts. Built to hold a flat measuring surface securely, the structure combines load distribution and low centre-of-gravity to reduce micro-movements during tactile or optical checks. That predictable behaviour translates into more repeatable readings and fewer re-measurements on the shop floor. Accessories that speed up setup and increase safety Included with the frame are three support brackets (Besselsche), two anti-tilt locks and adjustable feet with metal caps, which minimise the need for additional components. The support brackets simplify the seating of the plate and aid in fine alignment; the anti-tilt locks secure the assembly during handling and maintenance, lowering the risk of accidental displacement. The adjustable feet allow precise levelling on uneven surfaces, while the metal caps protect floor finishes and provide reliable contact points. These features shorten commissioning time and reduce logistical effort during installation. Practical benefits for workshops and inspection labs This Filetta frame is suitable for quality-control benches, calibration areas and precision workshops where a stable base and correct working height are essential. The clear height ranges and solid support arrangement make the frame a pragmatic choice for teams aiming to standardise inspection procedures. The robust design supports routine metrology processes, from layout and visual checks to probing and comparative measurements, contributing to consistent part acceptance and fewer process interruptions. Integration and workplace considerations The stand is categorised for use with surface plates and bench-mounted measuring setups and is compatible with a wide range of plate sizes where the specified overall height is required. The included mounting and safety hardware reduce the need for bespoke fittings, making the frame an economical centrepiece for a measuring table or inspection station. Its straightforward architecture supports straightforward maintenance and, where necessary, rapid relocation within a production environment. For secure, height-adjustable support choose the Filetta Surface Plate Stand and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and reliable supply Technical Data Article number: MS131.201 Brand: Filetta Category: Measuring table / surface plate stand Height (including measuring plate): 900–925 mm / 950–975 mm Included accessories: 3 x support brackets (Besselsche), 2 x anti-tilt locks, adjustable feet with metal caps Core technical data Height range option 1: 900–925 mm Height range option 2: 950–975 mm Support brackets: 3 Anti-tilt locks: 2 Special features Height-adjustable frame for measuring plates Anti-tilt safety devices for secure handling Adjustable feet with metal caps for levelling Designed for metrology benches and inspection tables FAQ Is the height of the stand adjustable and what are the exact ranges? The Surface Plate Stand MS131.201 is supplied with two overall height ranges: 900–925 mm and 950–975 mm (both values include the measuring plate). What accessories are delivered with the frame? Delivery of the Filetta MS131.201 includes three support brackets (Besselsche), two anti-tilt locks and adjustable feet fitted with metal caps. Is this frame suitable for workshop and inspection use? Yes, the stand has been developed for measuring plates and inspection benches, making it suitable for quality-control areas and workshop metrology stations. How are levelling and stability achieved on uneven floors? The supplied adjustable feet with metal caps enable precise levelling, while the bracket layout and anti-tilt locks enhance overall stability. Can the stand be integrated immediately into an existing measuring table? The frame is configured for straightforward integration with surface plates and typical inspection setups; the included support hardware reduces the need for additional fittings. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com