900x600x100mm Anti-Slip Pad For Measuring Table Plate Support - Filetta
€68.00
Product information "900x600x100mm Anti-Slip Pad For Measuring Table Plate Support - Filetta"
Take advantage of a secure, non-slip support that is matched to the common measuring plate size 900 x 600 x 100 mm and designed to improve repeatability on inspection tables; order the anti-slip protection directly via Metav Werkzeuge or consult Metav’s specialists for tailored advice.
Anti-slip protection for measuring plate frames — compatible with 900 x 600 x 100 mm plates | Filetta
The Anti-slip protection for measuring plate frames provides a stable interface for measuring plates and inspection tables, preventing unwanted movement during setup and measurement tasks while fitting standard frame designs.
- Secure anti-slip interface for measuring plates
- Designed for 900 x 600 x 100 mm plates
- Robust fit for measuring table frames
Secure foundation for consistent measurements
A stable base reduces variability in every measurement operation: the anti-slip device creates a controlled contact layer between the measuring plate and its frame, lowering the risk of lateral movement and therefore improving repeatability in routine checks. Matched specifically to the 900 x 600 x 100 mm plate geometry, the component is intended for metrology environments where consistent positioning influences traceable results. Designed for use on measuring tables and inspection stands, it supports accurate alignment without altering the plate geometry or clamping strategy.
Seamless integration with frames and stands to speed setup
Installation is conceived as a straightforward positioning on the plate frame so that time spent on alignment and re‑adjustment is reduced and throughput is increased. The solution is compatible with common measuring table constructions and support stands, providing a robust fit that limits micro‑shifts during probe contact or manual handling. As a practical accessory in a workshop or inspection bay, it contributes to smoother process flows and fewer repeat measurements, which in turn supports productivity and operational reliability.
Durable support that protects components and workflow
Built to serve as a repeatable interface, the anti-slip protection reduces abrasion and protects the plate surface during routine use and handling. The product’s role in minimising rework and stabilising setups makes it a simple, cost‑effective measure to safeguard quality gates in assembly and inspection operations. Supplied by a specialist metrology brand and distributed through Metav’s quality filter in Emmerich, the part is intended to integrate into established measurement routines and to support dependable material handling across shifts.
Contact Metav Werkzeuge for guidance on integrating the Filetta anti-slip solution MS131.126 into existing measuring table setups and for supply details via +49 2822 7131930 or info@metav-werkzeuge.com
Technical data
- Article number: MS131.126
- Manufacturer: Filetta
- Product name: Anti-slip protection
- Suitable for: measuring plates 900 x 600 x 100 mm
- Category: Measuring table
Numbers / Core technical data
- Compatible plate dimensions: 900 x 600 x 100 mm
Designs / Special features
- Anti-slip surface for plate-to-frame contact
- Intended for measuring plate frames and stands
- Suitable for inspection table applications
FAQ
Is this anti-slip protection compatible with plates other than 900 x 600 x 100 mm? The anti-slip protection is manufactured for measuring plates sized 900 x 600 x 100 mm; compatibility with other sizes is limited and may require a different accessory.
How does the anti-slip protection improve measurement repeatability? By providing a non-slip interface between the plate and its frame, the accessory reduces lateral movement and micro-shifts, which helps maintain repeatability during probing and visual inspections with the Filetta anti-slip protection MS131.126.
Can the anti-slip protection be used on any measuring table frame? The design is intended for typical measuring table frames and supports; it fits standard frame geometries used for inspection tables and stands, ensuring a robust fit where plate dimensions match.
Does the product include mounting hardware? The Filetta anti-slip protection MS131.126 is supplied as the anti-slip component itself; any additional fastenings or frame-specific adapters are not included unless stated separately by the supplier.
Who distributes this anti-slip protection in Europe? The anti-slip protection MS131.126 is distributed via Metav Werkzeuge and specialist metrology channels for reliable supply and quality assurance.
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Geeignet für
Stable, height-adjustable support with anti-tilt locks and three support brackets provides a dependable base for surface plates, improving repeatability in inspection tasks. The adjustable feet with metal caps permit precise levelling on uneven floors. Order via Metav Werkzeuge or consult our specialists for application guidance and supply. Surface Plate Stand MS131.201 — Filetta height-adjustable metrology frame The Surface Plate Stand MS131.201 offers a stable, height-adjustable frame for secure mounting of measuring plates in metrology, inspection and workshop environments. Height-adjustable 900–975 mm overall Anti-tilt safety devices included Three support brackets supplied Adjustable feet with metal caps Engineered for stable, repeatable measurements The stand is designed to deliver stable support for measuring plates, reducing variability in routine inspections. With two selectable overall height ranges (900–925 mm and 950–975 mm, measured including the measuring plate), the frame enables ergonomic working heights and consistent positioning of inspection artefacts. Built to hold a flat measuring surface securely, the structure combines load distribution and low centre-of-gravity to reduce micro-movements during tactile or optical checks. That predictable behaviour translates into more repeatable readings and fewer re-measurements on the shop floor. Accessories that speed up setup and increase safety Included with the frame are three support brackets (Besselsche), two anti-tilt locks and adjustable feet with metal caps, which minimise the need for additional components. The support brackets simplify the seating of the plate and aid in fine alignment; the anti-tilt locks secure the assembly during handling and maintenance, lowering the risk of accidental displacement. The adjustable feet allow precise levelling on uneven surfaces, while the metal caps protect floor finishes and provide reliable contact points. These features shorten commissioning time and reduce logistical effort during installation. Practical benefits for workshops and inspection labs This Filetta frame is suitable for quality-control benches, calibration areas and precision workshops where a stable base and correct working height are essential. The clear height ranges and solid support arrangement make the frame a pragmatic choice for teams aiming to standardise inspection procedures. The robust design supports routine metrology processes, from layout and visual checks to probing and comparative measurements, contributing to consistent part acceptance and fewer process interruptions. Integration and workplace considerations The stand is categorised for use with surface plates and bench-mounted measuring setups and is compatible with a wide range of plate sizes where the specified overall height is required. The included mounting and safety hardware reduce the need for bespoke fittings, making the frame an economical centrepiece for a measuring table or inspection station. Its straightforward architecture supports straightforward maintenance and, where necessary, rapid relocation within a production environment. For secure, height-adjustable support choose the Filetta Surface Plate Stand and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and reliable supply Technical Data Article number: MS131.201 Brand: Filetta Category: Measuring table / surface plate stand Height (including measuring plate): 900–925 mm / 950–975 mm Included accessories: 3 x support brackets (Besselsche), 2 x anti-tilt locks, adjustable feet with metal caps Core technical data Height range option 1: 900–925 mm Height range option 2: 950–975 mm Support brackets: 3 Anti-tilt locks: 2 Special features Height-adjustable frame for measuring plates Anti-tilt safety devices for secure handling Adjustable feet with metal caps for levelling Designed for metrology benches and inspection tables FAQ Is the height of the stand adjustable and what are the exact ranges? The Surface Plate Stand MS131.201 is supplied with two overall height ranges: 900–925 mm and 950–975 mm (both values include the measuring plate). What accessories are delivered with the frame? Delivery of the Filetta MS131.201 includes three support brackets (Besselsche), two anti-tilt locks and adjustable feet fitted with metal caps. Is this frame suitable for workshop and inspection use? Yes, the stand has been developed for measuring plates and inspection benches, making it suitable for quality-control areas and workshop metrology stations. How are levelling and stability achieved on uneven floors? The supplied adjustable feet with metal caps enable precise levelling, while the bracket layout and anti-tilt locks enhance overall stability. Can the stand be integrated immediately into an existing measuring table? The frame is configured for straightforward integration with surface plates and typical inspection setups; the included support hardware reduces the need for additional fittings. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com