Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact, workshop-ready grooving solution that combines a small 16 × 16 mm cross-section with compatibility for DGN 2C indexable inserts and a secure M4x10 clamping screw; procured and supported via Metav Werkzeuge for reliable supply and technical advice. D020TM — Grooving clamp holder DGN (16 × 125 mm, for DGN 2C inserts) by Teknik Makina D020TM is a compact grooving clamp holder designed for external grooving and parting operations with DGN 2C indexable inserts, suitable for precision shopfloor use. Compact 16 × 16 mm cross-section Compatible with DGN 2C indexable inserts M4x10 clamping screw, T15 hex key required 125 mm overall length, 16 mm maximum plunge depth Consistent clamping for accurate grooves The holder delivers a rigid clamping interface that stabilises the insert during cutting, which reduces chatter and improves surface finish. With a square shank of 16 mm and a cutting-head width of 16.2 mm, the unit offers a small footprint while maintaining stiffness. The design focuses on consistent results in repeat operations, translating tool geometry into predictable groove profiles and less rework. This results in improved process reliability for medium-duty turning and grooving tasks. Secure insert fit and fast changeovers Compatibility with DGN 2C indexable inserts and alignment to common ISCAR geometries ensures straightforward insert selection and interchangeability. The clamp is fastened with an M4x10 hex screw and requires a T15 key, enabling quick, repeatable tightening without complex tooling. Fast changeovers reduce machine downtime and support higher productivity in batch production. The simple clamping principle also makes it easy to verify correct seating and torque during routine checks. Space-saving design that supports workshop workflows At an overall length of 125 mm and a total height of 16 mm, the holder integrates easily into compact turret stations and small lathes. The specified maximum plunge depth 16 mm and 2 mm cutting width are suitable for common external grooving and parting tasks where controlled chip evacuation matters. Weighing 0.23 kg, the component is light to handle yet sufficiently rigid for stable cutting. The ISO-style designation 1616 simplifies toolholder selection and inventory management in the tooling cupboard. For precise grooving with the Teknik Cutting Tools DGN system, contact Metav Werkzeuge for tailored advice and reliable dispatch from Emmerich. Technical Data Article number: D020TM Description: Grooving clamp holder (DGN) Manufacturer: Teknik Makina Compatible inserts: DGN 2C Compatible insert manufacturer: ISCAR Clamping screw: M4x10 Hex key size: T15 Facts Shank width: 16 mm Shank height: 16 mm Cutting-head width: 16.2 mm Overall length: 125 mm Overall height: 16 mm Maximum plunge depth: 16 mm Cutting width: 2 mm Weight: 0.23 kg Special features ISO designation: 1616 Bore bar designation: 2C DGN Suited for external grooving and parting Lightweight, compact design Fast clamping with M4x10 screw FAQ Which indexable inserts fit this holder? The holder accepts DGN 2C format indexable inserts; ISCAR DGN 2C types are a direct match for the seating geometry. Is the D020TM suitable for parting-off on small lathes? The compact 16 × 16 mm shank and 125 mm length make the D020TM appropriate for many small-lathe setups, provided the turret or toolpost accepts a 16 mm square shank. What tool is required for clamping and how tight should it be? Clamping uses an M4x10 hex screw and a T15 key. Recommended torque values depend on machine and application; follow insert supplier guidance for clamping torque to ensure secure seating without over-tightening. How deep can the holder cut in one pass? The nominal maximum plunge depth is 16 mm, which defines the limit for safe, controlled grooving with standard DGN 2C inserts. Can the holder be kept as a spare for mixed-brand inserts? Yes; because the seating matches the DGN 2C geometry, the holder can be used with DGN 2C inserts from multiple manufacturers that adhere to the same indexable insert standard. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact solution that combines ISO 1616 shank stability, precise MGMN 200 insert compatibility and a 16 mm maximum parting depth for consistent production results — order the parting tool holder directly via Metav Werkzeuge or consult our specialists for integration advice. Parting tool holder D011TM — MGMN 200 compatibility, 16 x 16 mm ISO shank (Teknik Makina) A parting tool holder D011TM designed for precision parting and grooving tasks, compatible with MGMN 200 indexable inserts and optimised for stable clamping in 16 x 16 mm toolholders. ISO 1616 shank for stable clamping Compatible with MGMN 200 inserts Max parting depth 16 mm Quick clamp screw M4x10, key T15 Consistent cuts through rigid shank design The holder is engineered around an ISO 1616 (16 x 16 mm) shank that delivers high rigidity during transverse cutting operations. This structural stability reduces vibration and lateral deflection, which directly improves repeatability and surface finish when parting or grooving. For production environments where cycle-to-cycle consistency matters, the solid shank geometry translates into fewer rejects and longer insert life. Fast insert changes and proven compatibility Designed specifically for MGMN 200 indexable inserts (Korloy), the clamping concept uses an M4x10 clamping screw with a T15 hex key interface for secure, repeatable fastening. This arrangement permits swift insert replacement and reliable seat contact, lowering downtime during tool changes and simplifying maintenance in busy turning cells. The accepted insert form also ensures access to a broad range of grades for different materials. Geometry tuned for efficient parting With a maximum parting depth of 16 mm and a cutting width of 2 mm, the tool holder is optimised for narrow-part cutting and groove preparation. The slightly enlarged cutting-head width of 16.2 mm provides the necessary clearance for secure insert seating while the overall length of 125 mm offers reach without compromising stiffness. These measured proportions help maintain cutting stability and enable predictable chip flow in many turning applications. Integration, traceability and workshop fit Weighing only 0.23 kg, the holder is compact to handle and store while being robust enough for daily shop use. The ISO designation and clear compatibility with Korloy inserts make it straightforward to specify in CAM setups and tool lists. For workshops consolidating tooling suppliers, this component supports a standardised approach to clamping and inventory, helping to reduce procurement complexity and speed up machine changeovers. Contact Metav Werkzeuge today to discuss how the Teknik Makina parting tool holder D011TM fits specific production lines or to request tailored tooling advice from our specialists at Metav Werkzeuge Technical data Article number: D011TM SKU: D011TM Manufacturer: Teknik Makina Shank designation: ISO 1616 (16 x 16 mm) Overall length: 125 mm Overall height: 16 mm Cutting head width: 16.2 mm Max parting depth: 16 mm Cutting width: 2 mm Compatible insert: MGMN 200 (Korloy) Clamping screw: M4x10 Hex key: T15 Weight: 0.23 kg Measurements / core data Shank width: 16 mm Shank height: 16 mm Cutting head width: 16.2 mm Max parting depth: 16 mm Cutting width: 2 mm Overall length: 125 mm Weight: 0.23 kg Features / Compatibility Compatible with MGMN 200 indexable inserts (Korloy) ISO 1616 designation Clamping screw M4x10 with T15 key For parting and grooving applications FAQ What inserts fit this holder? The holder accepts MGMN 200 indexable inserts; it is specified for MGMN geometry and listed compatibility includes Korloy grades. What is the maximum parting depth? Maximum parting depth is 16 mm, determined by the holder geometry and seat position. Which shank size is required in the toolpost? The holder uses an ISO 1616 (16 x 16 mm) shank and requires a compatible 16 x 16 mm toolpost slot. How is the insert secured? The insert is clamped with an M4x10 screw; a T15 hex key is the recommended tool for tightening. Is this holder suitable for heavy roughing cuts? The holder is intended for controlled parting and grooving up to its rated 16 mm depth; for heavy roughing, a holder with a larger shank and reinforced geometry is advisable. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact, high-stability solution that combines a 16 mm clamping profile, compatibility with MGMN 300 inserts and a short overall length for tight setups. The result is reliable parting performance with low tool change time; order the item directly via Metav Werkzeuge or request advice from the consultants if further specification is required. Cut-off clamping holder MGMN — 16 x 16 mm, 125 mm — Teknik Makina Cut-off clamping holder engineered for precise parting and grooving tasks in small to medium turning centres, compatible with MGMN 300 indexable inserts Compact 16 x 16 mm clamping profile Compatible with MGMN 300 inserts (Korloy) Robust M4x10 clamping screw, T15 hex key Total length 125 mm Lightweight at 0.23 kg for easy handling Consistent clamping for repeatable parting operations The holder delivers a stable 16 mm clamping footprint that minimises vibration and protects insert life during parting operations. The compact geometry and 16.3 mm cutting-head width position the insert accurately, which translates into consistent groove quality and reduced scrap rates. Useful for batch production where uniformity is essential, the construction helps maintain surface finish by keeping the cutting forces aligned; the M4x10 clamping screw ensures secure fixing with straightforward torque application and a T15 hex key interface for quick service. Designed to speed up setup and minimise downtime With a total length of 125 mm and a weight of just 0.23 kg, the tool holder is tailored for tight tool posts and changeovers where accessibility matters. The short overhang reduces deflection and contributes to higher permissible feeds without sacrificing control. Where throughput is critical, the holder’s simple interface with MGMN 300 inserts—an established insert form—reduces the variety of spares required and shortens change intervals. The compact profile therefore supports improved machine uptime and a more efficient production flow. Compatibility explained for workshop planners Supplied for use with MGMN 300 indexable inserts from manufacturers such as Korloy, the holder suits common parting tasks and offers straightforward integration into standard tooling setups. Its ISO designation 1616 and the bores/slots designed for the 3C MGMN 300 bar mean toolroom engineers can plan tool lists with confidence. The holder’s maximum parting depth of 16 mm and a cutting-edge width of 3 mm should be matched to insert grade and machine power; selecting the correct insert geometry and grade will determine surface finish and tool life. Built for practical maintenance and replacement cycles The mechanical design focuses on fast, dependable serviceability: a single M4x10 clamping screw secures the insert seat, and common hex tooling (T15) is used for routine intervention. This reduces tool kit complexity at the machine and lowers the time spent on minor repairs or insert indexing. The result is a holder that is simple to maintain while still offering the positional stability required for repeatable operations in production and jobbing environments. For technical clarification, suitability checks or to order the Teknik Makina cut-off clamping holder (SKU D014TM), please contact Metav Werkzeuge in Emmerich: phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com — our specialists will advise on fitment, delivery and compatible inserts Technical data Article number: D014TM Name: Stechklemmhalter Brand: Teknik Makina Model / Type: MGMN Compatible inserts: MGMN 300 (Korloy) Facts Clamping width: 16 mm Overall height: 16 mm Cutting-head width: 16.3 mm Total length: 125 mm Weight: 0.23 kg Max parting depth: 16 mm Cutting width: 3 mm ISO designation: 1616 Special features For MGMN 300 inserts M4x10 clamping screw T15 hex key interface Bohrstange designation: 3C MGMN 300 FAQ What insert types fit this clamping holder? The holder is designed for MGMN 300 indexable inserts; compatible manufacturers include Korloy, matching the MGMN form factor for secure seating and predictable chip control. What is the maximum parting depth for this tool? Maximum recommended parting depth is 16 mm, specified to maintain stability and repeatable cut-off performance with the designed insert geometry. Which screw and tool are required for insert clamping? Insert clamping uses an M4x10 screw and is tightened with a T15 hex key for routine maintenance and secure fixing. Is the holder suitable for compact tool posts and smaller lathes? Yes — with a 125 mm overall length and a 16 x 16 mm profile, the holder suits tight tool-post arrangements and compact turning centres where reduced overhang is beneficial. What is the SKU and brand for ordering or spare listing? Order under SKU D014TM from Teknik Makina; Metav Werkzeuge can confirm delivery and compatible insert options. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact right‑hand parting solution that pairs a secure 16 × 16 mm shank clamp with a 3 mm cutting width and an 18 mm maximum plunge depth for reliable separation operations; order directly via Metav Werkzeuge or consult our technical advisors for application support Parting Tool Holder D719TM — right‑hand parting and grooving holder, 16 × 16 mm shank (Teknik Makina) A robust Parting Tool Holder D719TM designed for right‑hand parting and grooving operations; accepts Taegutec 3C TD inserts and fits ISO 1616 shanks Right‑hand cutting direction 16 × 16 mm shank clamping 3 mm cutting width for fine parting Compatible with Taegutec 3C TD inserts Consistent right‑hand performance for tight separation tasks The right‑hand cutting geometry delivers predictable chip flow and repeatable parting results, making the holder well suited to short-cycle production and precision jobbing. With a 3 mm cutting width and an 18 mm plunge depth, the tool is designed for narrow slot cutting and controlled separation where minimised material loss matters. The compact geometry reduces leverage at the clamp and helps to maintain stability during the cut, which supports improved surface finish and lower tool wear compared with less rigid options. Secure clamping and standardised mounting for fast changeovers Clamping is based on the 16 × 16 mm shank format and the holder meets the ISO 1616 shank designation, so integration into existing toolposts or boring bar mounts is straightforward. Compatibility with Taegutec 3C TD inserts and the 3C‑R TD boring‑bar designation enables the use of established insert grades and geometries. The moderate overall length of 125 mm and a mass of 0.256 kg balance reach and rigidity, reducing vibration without excessive overhang, which contributes to stable cutting conditions and longer insert life. Workshop advantages: compact design, reliable handling, easier planning The holder’s compact form factor and standardised interfaces simplify tooling lists and inventory planning for workshops and production lines. The combination of secure clamping and standard insert compatibility permits quick insert changes and predictable reconditioning cycles, which supports uptime and consistent output quality. Where tight dimensional control and repeatability are required, this parting solution integrates into existing setups with minimal adaptation, helping to streamline production planning and reduce handling time. Contact Metav Werkzeuge for tailored application advice or to secure the Teknik Cutting Tools parting tool holder D719TM with swift dispatch from our Emmerich hub Technical data SKU: D719TM Manufacturer: Teknik Makina Product: Parting tool holder Cutting direction: right Compatible inserts: Taegutec 3C TD Shank designation: ISO 1616 Dimensions & weight Shank height: 16 mm Shank width: 16 mm Head width: 16 mm Cutting width: 3 mm Max plunge depth: 18 mm Overall length: 125 mm Weight: 0.256 kg Special features Compatible with Taegutec 3C TD inserts Boring bar designation: 3C‑R TD Right‑hand cutting ISO 1616 shank compatibility FAQ Can the holder accept Taegutec 3C TD inserts? Yes. The parting tool holder D719TM is specified for use with Taegutec 3C TD inserts and supports the associated insert geometries. What are the shank dimensions and mounting standard? The D719TM features a 16 × 16 mm shank and is compatible with the ISO 1616 shank format for straightforward mounting. Is the holder suitable for left‑hand cutting? No. The parting tool holder D719TM is manufactured for right‑hand cutting only. What is the maximum plunge depth for the holder? The maximum plunge depth is 18 mm with a cutting width of 3 mm for controlled parting operations. What are the overall length and weight for setup calculations? Overall length is 125 mm and the weight is 0.256 kg, offering a balance of reach and rigidity for many workshop applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure clamping, precise 3 mm cutting width and compatibility with ZCC 3C ZT.D indexable inserts for reliable parting and grooving performance. Order the parting tool holder directly via Metav Werkzeuge or consult our specialists for specification matching and fast supply. Parting Tool Holder 1616 by Teknik Makina — right-hand, 3 mm cutting width A Parting Tool Holder 1616 engineered for right-hand parting and grooving tasks; designed to accept ZCC 3C ZT.D indexable inserts for precise, repeatable cuts in production and workshop environments Compatible with ZCC 3C ZT.D inserts 3 mm cutting width for narrow grooves 16 mm shank height and width Right-hand cutting for standard turning Dependable parting performance that reduces rework The Parting Tool Holder delivers a focused cutting geometry that supports stable, repeatable cuts thanks to its defined 3 mm cutting width and solid interface for indexable inserts. The combination of a compact clamping area and the holder’s stiffness reduces vibration during cut-off operations, which in turn lowers the risk of part distortion and tool failure. For production environments where cycle consistency is critical, this configuration promotes predictable tool life and fewer scrap parts. Compact dimensions with secure clamping for consistent set-up The holder’s 16 mm shank dimensions (height and width) and robust clamping construction permit quick, precise positioning in tool posts with minimal overhang. With an overall length of 125 mm and a mass of 0.301 kg, the component is sized to minimise leverage while still providing convenient access for insert changes. The clamping design secures the indexable insert reliably, supporting higher feed stability and repeatable set-ups across series production. Streamlined compatibility to simplify tooling choices Compatibility with ZCC 3C ZT.D indexable inserts and the ISO designation 1616 means straightforward integration into existing parting and grooving tool sets. The holder is specified for right-hand cutting, matching standard lathe orientations, and is referenced with the bar designation 3C-R ZT-D, enabling easier procurement of matching bars and inserts. This alignment of holder and insert standards reduces complexity when planning tool inventories and replacement cycles. Practical workshop benefits and suitable applications Designed for narrow parting, finishing grooves and intermittent cut-off operations, the holder supports controlled material removal up to the stated maximum cutting depth of 18 mm. Its compatibility with a recognised insert family and concise dimensions make it a pragmatic choice for small-batch production, toolrooms and maintenance shops where fast insert swaps and dependable clamping are priorities. The result is improved throughput with lower setup overhead. For technical clarification or procurement of Teknik Makina parting components, contact Metav Werkzeuge in Emmerich for a specification check and prompt supply from stock Technical Data Article number: D027TM Manufacturer: Teknik Makina Product name: Parting tool holder (Stechklemmhalter) Manufacturer SKU: D027TM Dimensions & Weight Overall length: 125 mm Shank width: 16 mm Shank height: 16 mm Cutting width: 3 mm Maximum parting depth: 18 mm Weight: 0.301 kg Compatibility & Features Cutting direction: right-hand Compatible inserts: 3C ZT.D Insert manufacturer reference: ZCC ISO designation: 1616 Bar designation: 3C-R ZT-D FAQ What inserts fit this holder? The holder accepts ZCC 3C ZT.D indexable inserts; the assembly is specified to work with that insert family for consistent seat and chip control with the Parting Tool Holder (Teknik Makina, SKU D027TM). Is the tool suitable for deep grooving? This parting holder is specified for a maximum cutting depth of 18 mm; for deeper operations, alternative tooling or multiple passes may be required with the Teknik Makina holder D027TM. Can it be mounted in standard tool posts? Yes. The 16 mm shank dimensions are compatible with tool posts designed for 16 mm holders, enabling reliable clamping and repeatable set-up with the Teknik Makina parting solution. What is the hand of cut and how does it affect set-up? The component is configured for right-hand cutting, which matches common lathe orientations; this should be considered when positioning the holder in the turret or tool post to achieve correct chip flow and clearance. Which data specify the holder for procurement? Refer to the SKU D027TM, ISO designation 1616, and the compatible insert family 3C ZT.D when ordering or matching inserts for the parting holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid holder that combines a 16 x 16 mm ISO shank, a 2 mm cutting width and compatibility with Korloy 2C MGM inserts to achieve clean parting cuts and stable grooving operations; order the (Stechklemmhalter) directly via (Metav Werkzeuge) or ask our consultants if needed. Stechklemmhalter — Parting and grooving tool holder, left-hand, ISO 1616 (Teknik Makina) The Stechklemmhalter is a left-hand parting and grooving holder engineered for secure clamping of 2C MGM style inserts and precision narrow-width cuts in CNC turning applications. Compact 16 x 16 mm ISO shank Max grooving depth 16 mm 2 mm cutting width for narrow grooves Compatible with Korloy 2C MGM inserts Increased stability through a compact ISO 1616 shank A compact 16 x 16 mm shank (ISO 1616) provides a rigid interface with the tool post, reducing vibration and improving surface finish during parting operations. The modest 125 mm overall length and low mass (0.25 kg) limit overhang while maintaining accessibility in tight setups. This translates into more predictable chip formation and reduced rework, so production runs benefit from steadier cycle times and fewer rejects. Reliable compatibility with established insert systems Designed for use with Korloy inserts in the 2C MGM format and matching boring-bar designation 2C-L MGM, the holder fits commonly stocked insert types. Compatibility ensures simple stocking and fast aftermarket replacement. The clamp-style mounting secures the insert for consistent cutting geometry; explained for non-specialists, this means repeatable parting widths and predictable tool life with standardised inserts. Precise narrow cuts up to 16 mm depth With a 2 mm cutting width and a maximum grooving depth of 16 mm, the holder is intended for fine parting and internal/external grooving tasks where space is restricted. Narrow-width cutting reduces material waste and enables close-tolerance separation of finished parts. For left-hand operations, the orientation of the holder sets the correct chip flow and clearance, helping to protect the workpiece and insert during the cut. Practical workshop advantages and straightforward handling The conservative dimensions and proven geometry make the holder straightforward to integrate across turning centres and lathes. The parting solution is lightweight yet robust, supporting quicker set-ups and simpler handling on the bench. For purchasers seeking dependable supply and expert advice, Metav provides a quality-filtered inventory from Emmerich and guidance on matching the holder to machine and insert choices. For precise left-hand parting with Teknik Makina tool holders, contact Metav Werkzeuge for tailored advice and secure supply from Emmerich — Metav’s consultants are available to discuss application specifics and compatibility Technical data Article number: D608TM Manufacturer: Teknik Makina Product designation: Stechklemmhalter ISO shank designation: 1616 Compatible inserts: Korloy 2C MGM Boring-bar designation: 2C-L MGM Facts Weight: 0.25 kg Overall length: 125 mm Shank height: 16 mm Shank width: 16 mm Cutting width: 2 mm Max grooving depth: 16 mm Special features Left-hand cutting direction Parting and grooving application Clamp-style holder for indexable inserts ISO 1616 compact shank FAQ Which insert type fits this parting holder? The holder accepts Korloy 2C MGM style inserts; the designation 2C MGM is the specified compatible insert format for reliable seating and cutting performance. Is this holder suitable for left-hand turning only? Yes, the tool is specified for left-hand cutting direction and is configured to direct chips and cutting forces accordingly. What are the key dimensions relevant for machine setup? Important setup dimensions include the 16 x 16 mm ISO shank, 125 mm overall length, and 2 mm cutting width, which guide tool-post clearance and overhang planning. Can the holder handle deep grooving operations? The holder supports a maximum grooving depth of 16 mm, making it suitable for many parting and grooving tasks within that limit. What is the SKU for ordering spare holders or replacements? Order reference: D608TM (Teknik Makina Stechklemmhalter) Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid holder that combines secure clamping with compatibility for common indexable inserts; the 16 x 16 mm shank and 3 mm cutting width ensure stable parting and grooving operations — order directly via Metav Werkzeuge or consult our advisors for application-specific advice. Parting clamp holder D848TM — 16 x 16 mm shank, 3 mm cutting width (Teknik Makina) Parting clamp holder D848TM is a compact tool holder designed for grooving and parting tasks on CNC lathes, compatible with 3C DGM 3 indexable inserts. Robust 16 x 16 mm shank for secure mounting Precise 3 mm cutting width for narrow grooving Compatible with 3C DGM 3 indexable inserts 125 mm overall length for improved rigidity Efficient, measurable performance for routine parting operations The D848TM combines a 16 x 16 mm tool shank with a focused 3 mm cutting width to deliver repeatable results on short to medium-length turning and grooving cycles. The holder accepts the common 3C DGM 3 format of indexable inserts, allowing fast insert changes and consistent cutting geometry. By using a standardised insert format, toolset management is simplified and process stability is increased, which supports predictable cycle times and reduced setup effort. Rigid design that reduces vibration and improves surface finish With an overall length of 125 mm and a compact cross-section, the holder is engineered to maximise rigidity close to the cutting edge. The clamping arrangement secures the insert for reliable cutting up to a 17 mm parting depth, while the modest mass (approx. 0.263 kg) keeps dynamic forces low on the spindle. This combination helps to lower chatter, producing better surface integrity and extending insert life — an economical choice for workshops prioritising throughput and consistent quality. Practical handling and setup for workshop efficiency The clamp-style fixation and compatibility indicated as 3C DGM 3 facilitate quick insert replacement and simple tool alignment. The ISO-style designation 1616 reflects the standardised shank dimensions, making the holder straightforward to integrate into existing tool posts that accept 16 x 16 mm tooling. For cutters and maintenance teams, the obvious advantages are reduced changeover times and fewer bespoke holders to manage, supporting leaner tool inventories and faster job changeovers. For reliable parting and grooving, request Teknik Makina’s D848TM via Metav Werkzeuge — contact our Emmerich team for matching inserts, delivery options and technical guidance to ensure the holder fits the intended machine and application Technical data Article number: D848TM Manufacturer: Teknik Makina Designation: Parting clamp holder Facts Shank height: 16 mm Shank width: 16 mm Cutting-head width: 16 mm Cutting width: 3 mm Maximum parting depth: 17 mm Overall length: 125 mm Weight: 0.263 kg ISO designation: 1616 Special features Compatible inserts: 3C DGM 3 Suitable insert manufacturer reference: TNGLY-OKE Clamp-style fixation for indexable inserts FAQ Which inserts fit this holder? The holder is specified for 3C DGM 3 indexable inserts; use inserts referenced as 3C DGM 3 and those listed by the insert manufacturer TNGLY-OKE. What is the maximum cutting depth? Maximum recommended parting depth is 17 mm, in line with the holder’s design and clamping geometry. Is the shank industry-standard? Yes, the shank follows the 16 x 16 mm (ISO 1616) format, enabling fitment in tool posts that accept 16 x 16 mm holders. Which applications suit this holder best? The D848TM is optimised for grooving and parting on conventional and CNC lathes where a narrow 3 mm cut and solid clamping are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-engineered holder that combines rigid clamping with narrow cutting capability for clean parting operations; reliable compatibility with Horn indexable inserts ensures consistent tool life and repeatable grooves. Order the parting tool directly via Metav Werkzeuge or consult the Metav team for application advice. Parting Tool Holder D703TM — right-hand grooving and parting holder, 16 x 16 mm shank Parting Tool Holder D703TM designed for right-hand parting and grooving on conventional and CNC lathes, compatible with Horn indexable inserts and ISO 1616 insert geometries 16 x 16 mm shank for stable clamping Compatible with Horn indexable inserts 3 mm cutting width for precise grooves Right-hand cutting, 100 mm overall length Precise mounting and compatibility for dependable setups The compact parting tool holder delivers a predictable, vibration-resistant mounting thanks to its 16 x 16 mm cross section and ISO designation 1616, which aligns with common toolpost interfaces. Compatibility with Horn indexable inserts and the listed bar designation 3C-R S224 simplifies procurement and replacement, reducing machine downtime. The clamping geometry is engineered to maintain consistent insert seating, which directly improves repeatability and reduces rework in batch production. Optimised cutting performance for narrow grooves and parting With a defined 3 mm cutting width and a maximum cutting depth of 18 mm, this grooving holder is aimed at precise parting and finishing passes where tight groove tolerances are required. The right-hand cutting orientation supports conventional lathe setups and predictable chip flow, making the holder suitable for both small-series manufacture and repair work. By matching groove width and depth to the insert geometry, material removal becomes more efficient and tool life is extended. Compact form factor that suits busy workstations At an overall length of 100 mm and a mass of only 0.26 kg, the tool holder is easy to position and causes minimal overhang, which helps to reduce deflection during heavy cuts. The balanced dimensions support stable cutting even in short overhang scenarios, while the modest weight makes tool changes quicker and less fatiguing for operators. This compact design is particularly useful in shops where multiple holders are kept ready for rapid switching between operations. Clear application range and workshop advantages The holder is intended for use with Horn-manufactured inserts and conforms to the ISO 1616 insert family, enabling straightforward inventory management and fast replacement. The combination of narrow cutting width, defined maximum depth and standardised shank size provides a predictable solution for turning centres, toolrooms and maintenance departments that require clean parting cuts and accurate grooving. The result is fewer rejects and better process control across repeated cycles. For reliable parting and grooving performance from Teknik Makina, contact Metav Werkzeuge for purchasing and tailored technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machines and applications Technical data Article number: D703TM Name: Stechklemmhalter Manufacturer: Teknik Makina ISO designation: 1616 Facts Shank height: 16 mm Shank width: 16 mm Cutting-head width: 16 mm Cutting width: 3 mm Max parting depth: 18 mm Overall length: 100 mm Weight: 0.26 kg Cutting direction: right Special features Compatible with Horn indexable inserts Bar designation: 3C-R S224 Suitable for parting and grooving applications FAQ What insert type fits this holder? The holder accepts Horn indexable inserts compatible with the ISO 1616 geometry; matching insert style should be selected to suit the required groove width and material. Is this holder suitable for both CNC and manual lathes? Yes — the compact dimensions and standardised 16 x 16 mm shank make the holder suitable for conventional toolposts and many CNC turret systems. What is the maximum parting depth with this holder? The maximum cutting or parting depth is 18 mm, which accommodates most narrow-to-medium section separations and grooving tasks. Does the holder support left-hand cutting? This model is configured for right-hand cutting; left-hand operations require the corresponding left-hand variant. Which bar specification does the holder match for mounting? The tool holder matches the bar designation 3C-R S224, facilitating compatibility with common bar and turret systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining precise 2 mm cutting capability with a 16 mm shank and a 35 mm cutting height delivers stable, repeatable parting operations and reduced scrap; order the K600TM through Metav Werkzeuge or consult their specialists for application guidance. K600TM Parting and Grooving Clamp Holder — 16 mm shank, 2 mm cutting width (Teknik Makina) K600TM is a parting and grooving clamp holder engineered for precision turning applications, compatible with 2C MGM indexable inserts and tailored for production lathe environments 16 mm shank diameter for secure clamping 2 mm cutting width for narrow parting cuts 35 mm cutting height for deep grooves 180 mm overall length for extended reach Compatible with Korloy, ISCAR, Sandvik inserts Stable parting performance that reduces rework The K600TM delivers a stable clamping interface thanks to its 16 mm shank and robust holder geometry, which together lower vibration during parting and grooving operations. The 2 mm cutting width provides a narrow kerf suited to accurate cut‑off work, while the 35 mm cutting height supports deeper groove needs without frequent re‑setups. These characteristics translate into fewer rejects and more predictable cycle times on production lathes. Wide compatibility for streamlined tooling logistics Designed around the MGM holder family and the ISO designation S16Q 2C‑R, this clamp holder accepts 2C MGM indexable inserts and is compatible with major insert manufacturers such as Korloy, ISCAR, and Sandvik. That compatibility simplifies tool procurement and spare‑part management in mixed‑brand toolrooms, enabling standardised toolholders across multiple machines and reducing inventory complexity. Compact, lightweight design for efficient handling With an overall length of 180 mm and a weight of 0.288 kg, the holder combines reach with a compact footprint for tight toolposts and small‑diameter tooling envelopes. The reduced mass aids rapid tool changes and helps maintain tool balance, which benefits machining stability. The modest diameter and precise dimensions support consistent set‑ups across repetitive batches, improving first‑part accuracy. Practical machining benefits and shop-floor reliability Beyond raw dimensions, the clamp holder focuses on practical workshop gains: reliable insert seating, a predictable cutting geometry for parting, and straightforward integration into established turning stations. The design supports systematic changeover procedures and consistent chip formation, helping to shorten ramp‑up times on new jobs while maintaining process reliability in everyday production. Contact Metav Werkzeuge for availability and tailored application advice on the Teknik Makina K600TM parting and grooving holder — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K600TM Designation: Parting and grooving clamp holder Manufacturer: Teknik Makina eClass: 21181005 Core technical data Shank diameter: 16 mm Cutting width: 2 mm Cutting height: 35 mm Overall length: 180 mm Weight: 0.288 kg Diameter: 21 mm Compatibility & features Suitable for 2C MGM inserts Compatible with Korloy, ISCAR, Sandvik, ZCC Shank designation: S16Q 2C‑R Holder family: MGM FAQ Is the K600TM compatible with Korloy inserts? Yes. The K600TM is designed for 2C MGM insert geometries and is compatible with inserts from Korloy, as well as other common brands listed in the technical data. What shank diameter and length does the holder use? The Teknik Makina K600TM features a 16 mm shank diameter and an overall length of 180 mm, offering a balance between reach and rigidity. What are the cutting width and height specifications? The holder provides a 2 mm cutting width and a 35 mm cutting height, suitable for precise parting and deeper grooving operations. Which holder family and ISO designation apply to this tool? The clamp belongs to the MGM holder family with the ISO designation S16Q 2C‑R, ensuring standardised fitting where MGM tooling is used. Is the K600TM suitable for production lathe applications? Yes. The K600TM from Teknik Makina is engineered for production turning and parting tasks, offering the stability and repeatability required for batch machining and high‑frequency tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable clamping and compact dimensions to improve finishing passes and reduce tool change time; the combination of TCMT 1102 compatibility and a slim Ø12 mm shaft makes this a practical choice for tight setups. Order through Metav Werkzeuge or contact our consultants for application advice. S12K STFCR boring bar — STFC for TCMT indexable inserts, right-hand The S12K STFCR is a right-hand STFC boring bar designed to secure TCMT 1102 indexable inserts for reliable finishing and light turning operations. Right-hand cutting for predictable chip flow Fits TCMT 1102 indexable inserts Shaft Ø12 mm for compact setups Increased finishing reliability through secure clamping The slim boring bar is designed with an STFC clamping geometry that prioritises a firm seat for the insert, which reduces micro-movement under cutting forces. With a cutting angle of 90° and a dedicated clamp profile for TCMT 1102, the assembly delivers consistent contact between insert and holder; this improves surface finish and reduces scrap rates during finishing passes. The compact mass and balanced form help to suppress vibration, supporting higher productivity in repetitive turning operations. Compact design that simplifies machine setup A narrow shaft Ø12 mm combined with an overall diameter of Ø16 mm and 125 mm overall length allows installation in confined tool pockets and on multi-tool turrets where space is at a premium. The 25 mm cutting height ensures correct insert projection for standard tool geometries, while the light weight (approx. 0.118 kg) aids rapid tool changes and lowers inertial load on small spindles. These measurable attributes translate into shorter setup times and easier tool management on small- to medium-sized lathes. Practical benefits for everyday workshop tasks For machine shops focused on efficient finishing, this indexable insert holder supports repeatable results and straightforward logistics: the ISO designation S12K STFCR simplifies ordering and matching with compatible toolholders, and the right-hand orientation provides a conventional chip flow for standard turning strategies. Where process reliability matters, the boring bar helps maintain consistency across batches and fits well into a Metav-managed supply chain that emphasises availability and quality control. For application-specific advice on using this STFC boring bar with TCMT 1102 inserts contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability and delivery options. Technical data Article number: K160TM ISO designation: S12K STFCR Brand: Teknik Makina Facts Diameter: 16 mm Shaft diameter: 12 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.118 kg Cutting angle: 90° Cutting direction: Right-hand Special features For TCMT 1102 indexable inserts STFC clamping geometry Suitable for finishing operations SKU: K160TM FAQ Which inserts are compatible with this tool? The boring bar is compatible with TCMT 1102 indexable inserts; the STFC clamp is optimised to seat that insert type securely for finishing operations. What are the key dimensions to check before ordering? Check the Ø16 mm outer diameter, shaft Ø12 mm, and 125 mm overall length to ensure the boring bar fits the intended holder and turret pocket. Is the tool right- or left-hand oriented? This version is right-hand oriented, delivering chip flow and cutting direction consistent with standard right-hand turning operations for the S12K STFCR boring bar. How does the STFC clamping benefit machining results? The STFC clamping geometry provides repeatable insert positioning and improved stability, which helps reduce vibration and enhances surface finish during finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise right-hand cutting, integrated internal coolant and secure seating for TCMT 1102 indexable inserts — engineered for consistent boring performance and reliable chip control. Order the tool directly via Metav Werkzeuge or contact our consultants for tailored advice and delivery. Boring Bar A25R STFCR — STFC Holder for TCMT Indexable Inserts (Teknik Makina) The Boring Bar A25R STFCR is a right-hand STFC toolholder designed for precision internal boring and finishing using TCMT 1102 indexable inserts in workshop and light industrial turning applications Right-hand cutting direction Internal coolant feed enabled Compatible with TCMT 1102 inserts Ø 16 mm outer diameter, 125 mm overall length Stability and repeatable precision in internal boring The holder delivers consistent concentricity thanks to its compact geometry and defined shank dimensions. With a 12 mm shank diameter and an effective outer diameter of 16 mm, the tool provides a stable connection to the toolpost, reducing vibration during finishing passes. This stability improves surface finish and lowers the risk of premature insert wear, which in turn supports predictable cycle times and fewer rework operations. The ISO designation A25R STFCR indicates a standardised interface for clamping and repeatable mounting in standard toolholders. Controlled coolant and chip evacuation for improved tool life Integrated internal coolant is routed directly to the cutting zone to aid heat dissipation and chip formation. When used with TCMT 1102 indexable inserts, the coolant reduces thermal loading on the insert corner and promotes controlled chip breaking, particularly on harder or abrasive materials. The 90° cutting angle combined with right-hand cutting direction gives an efficient cutting geometry for internal boring and light grooving, helping to maintain tool life and machining stability over longer production runs. Compatibility, workshop efficiency and straightforward handling Designed for straightforward integration into existing setups, the STFC-style holder accepts widely used triangular TCMT inserts and fits standard clamping systems. The compact 125 mm overall length and low mass (approx. 0.053 kg) make it suitable for tight bores and confined tool posts where balance and minimal overhang are important. Using standard indexable inserts simplifies inventory and reduces downtime: worn cutting edges are replaced quickly without regrinding, supporting more efficient shift patterns and predictable throughput. Contact Metav Werkzeuge today to discuss the A25R STFCR boring bar from Teknik Makina and arrange a precise supply or tailored technical consultation — Metav Werkzeuge, Emmerich; eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical data SKU: KA166TM Name: Boring bar / STFC for TCMT indexable inserts (STFC for TCMT Indexable Inserts) ISO designation: A25R STFCR eClass: 21180806 Core technical data Overall length: 125 mm Outer diameter: 16 mm Shank diameter: 12 mm Cutting height: 25 mm Weight: 0.053 kg Cutting angle: 90° Cutting direction: right Special features Compatible with TCMT 1102 indexable inserts Internal coolant feed STFC-style clamping for TCMT inserts Story trigger: bohrstange FAQ What insert type fits this holder? The holder accepts TCMT 1102 indexable inserts; the STFC clamping ensures secure seating and repeatable positioning for each indexed corner. Is internal coolant available on the tool? Yes — the A25R STFCR boring bar is supplied with internal coolant capability to deliver fluid directly to the cutting edge and improve heat control. What are the key dimensions to check for machine compatibility? Check the 16 mm outer diameter, 12 mm shank diameter and 125 mm overall length to ensure the tool fits the toolpost and the bore depth available. Which cutting direction is specified for this tool? The tool is configured for right-hand cutting, suitable for standard internal turning operations where right-hand feed is required. Can the tool be used for finishing passes in tight bores? Yes — the compact design and 90° cutting geometry make the tool suitable for controlled finishing passes in restricted internal spaces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, standard insert compatibility and compact dimensions to improve turning stability and cycle consistency; order directly via Metav Werkzeuge or contact our consultants for application advice. SVVCN 1616 clamping holder for VCMT 1604 indexable inserts — neutral cutting, 100 mm length (Teknik Makina) The SVVCN 1616 clamping holder is a compact turning tool holder designed for general turning operations with VCMT 1604 indexable inserts, providing a neutral cutting arrangement for versatile machining tasks. SVVCN 1616 profile for secure clamping Compatible with VCMT 1604 indexable inserts Neutral cutting direction for versatile use Compact 100 mm length, lightweight 0.187 kg Increased process stability through precise clamping The SVVCN 1616 holder is engineered to deliver repeatable clamping and a defined seating for indexable inserts, which reduces vibration and improves surface finish. The holder’s geometry, combined with a 72.5° cutting angle, supports consistent chip formation and lower tool deflection; this results in fewer in-process adjustments and longer intervals between regrinds. For production environments where stability and reproducibility matter, the secure clamping mechanism translates directly into predictable cycle times and reduced scrap rates. Broad compatibility with a common insert grade for quicker changeovers Designed specifically for VCMT 1604 indexable inserts, the holder simplifies tooling logistics and reduces the range of inserts required on the shop floor. The neutral cutting direction allows the same setup to be used across a range of turning tasks, improving flexibility. Insert replacement is straightforward and designed to be performed quickly; the standardised interface means that spare inserts can be stocked economically, lowering total tooling downtime and improving overall throughput. Compact design that enhances rigidity in tight set-ups With a 100 mm overall length and a compact cross-section of 16 x 16 mm, the holder minimises overhang and increases rigidity in constrained workspaces. The narrow 8 mm cutting head width and modest mass of 0.187 kg reduce centrifugal loads and make the holder suitable for short-reach operations where chatter and deflection are a concern. Reduced overhang combined with a compact profile makes it easier to maintain tight tolerances close to shoulders and internal features. Practical specification for consistent workshop results The tool is supplied in the ISO designation SVVCN 1616 and is identified with the shank designation H16, which supports straightforward integration into existing toolholder inventories. A specified cutting-edge height of 35 mm and the neutral feed orientation are useful for planning fixture clearances and tool-path strategies. The holder’s measured characteristics permit quick calculation of tool stick-out and clamping parameters, enabling machining programmes to be prepared with clarity and fewer on-machine trials. For reliable turning results with a compact and compatible solution, ask Metav Werkzeuge about the SVVCN 1616 clamping holder (SKU D144TM) to confirm suitability for specific components — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D144TM Manufacturer: Teknik Makina ISO designation: SVVCN 1616 Facts Overall length: 100 mm Holder height: 16 mm Holder width: 16 mm Cutting head width: 8 mm Cutting edge height: 35 mm Cutting angle: 72.5° Weight: 0.187 kg Cutting direction: neutral Special features Suitable for VCMT 1604 inserts Shank designation H16 Indexable insert holder FAQ Which inserts fit this holder? The SVVCN 1616 clamping holder is compatible with VCMT 1604 indexable inserts; this match is specified for reliable seating and predictable chip formation when used as intended (SKU D144TM, Teknik Makina). What cutting direction is recommended? The holder is configured for a neutral cutting direction, offering versatility for a variety of turning operations and allowing the same set-up to be applied to different part geometries. Is the holder suitable for tight fixture spaces? Yes. With a 100 mm overall length and a compact 16 x 16 mm profile, the holder is intended for confined setups where reduced overhang and increased rigidity are needed. How does the 72.5° cutting angle affect machining? A 72.5° cutting angle supports stable chip removal and a balanced cutting force vector, which helps reduce tool deflection and contributes to improved surface finish and longer insert life. What is the weight and how does it influence performance? Weighing 0.187 kg, the holder’s low mass reduces dynamic loading and helps maintain stability at higher spindle speeds when used within recommended limits. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, compatibility with 11 IR indexable inserts and compact dimensions for reliable, repeatable internal threading; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Gewindebohrstange K327-1TM — Internal thread boring bar, 16 mm diameter, internal coolant (Teknik Makina) The Gewindebohrstange K327-1TM is an internal thread boring bar intended for use with IR indexable inserts, providing a compact 125 mm overall length and integrated cooling for improved surface finish and tool life Internal coolant for controlled cutting conditions Fits 11 IR indexable inserts 16 mm diameter, 125 mm overall length Secured with Torx screw M2.5x5.5 and T8 key Deliver consistent internal threads with precise insert support The K327-1TM is engineered to support 11 IR indexable inserts, enabling consistent pitch and flank accuracy across repetitive internal-thread cycles. The 16 mm diameter shaft contributes to reduced deflection, which in turn increases repeatability and reduces rework. For operations where reproducible thread form matters, the combination of a rigid tool body and standardised insert geometry helps maintain machining tolerances throughout production runs. Reduced heat and improved insert life thanks to internal coolant and secure clamping Integrated internal coolant directs lubricant and coolant towards the cutting zone, which lowers cutting temperatures and improves chip evacuation. This controlled cooling extends tool life and helps achieve cleaner thread surfaces. The insert is held with a Torx screw M2.5x5.5 (requires T8 key), a familiar fastening method that offers secure clamping and straightforward replacement, shortening downtime during insert changes. Compact design for efficient workshop integration and predictable handling With an overall length of 125 mm and a 16 mm diameter, this boring bar occupies little space in tight bores while still delivering the necessary stiffness for internal thread generation. The tool is suitable for standard indexable-insert workflows and is simple to stock alongside other insert tooling. Specified dimensions and familiar fastening make the component easy to document in tool lists and predictable in setup times, supporting faster changeovers and consistent cycle planning. For reliable internal thread production with Teknik Makina tooling, contact Metav Werkzeuge for expert guidance and rapid supply from Emmerich — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K327-1TM Manufacturer: Teknik Makina ECLASS: 21180806 Data Diameter: 16 mm Overall length: 125 mm For inserts: 11 IR Special features Internal coolant: yes Torx screw: M2.5x5.5 Torx key: T8 FAQ What insert type does this boring bar accept? The Gewindebohrstange K327-1TM is designed for 11 IR indexable inserts, allowing straightforward replacement and consistent thread geometry. Is the coolant internal or external? The tool provides internal coolant, which directs fluid to the cutting zone for improved cooling and chip control during internal threading. What are the key dimensions to consider for setup? Key dimensions are 16 mm diameter and 125 mm overall length; these determine rigidity and reach for bore preparation and threading. How is the insert secured in the tool? Insert clamping is achieved with a Torx screw M2.5x5.5, tightened or released using a T8 key for secure and repeatable fastening. Can this tool improve cycle times in serial production? Yes. The combination of a stiff 16 mm shaft, internal coolant and indexable inserts reduces interruptions and supports consistent thread quality, helping to streamline serial internal-thread machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a rigid 25 mm shank with a Ø 16 mm cutting diameter and a 64 mm cutting length, this solid drill body delivers stable, repeatable through-hole machining for indexable-insert operations; order the part directly via Metav Werkzeuge or consult their specialists for application advice. U716TM Solid Drill by Teknik Makina — Ø 16 mm, 140 mm overall length The U716TM Solid Drill is an indexable-drill body engineered for precision through-hole drilling using SPMG 0602 inserts, suited to general machining tasks that demand stability and economical insert replacement. Indexable for SPMG 0602 inserts Ø 16 mm drill diameter 25 mm shank for rigid clamping 64 mm cutting length Repeatable accuracy through robust sizing A consistent hole quality is achieved by the combination of a 25 mm shank and a balanced body geometry that reduces vibration. The substantial shank diameter ensures reliable seating in standard toolholders, which supports stable machining and reduces runout. For production environments that prioritise repeatability, the fixed dimensions — including an overall length of 140 mm — provide a predictable set-up time and fewer reworks. Economical machining with indexable inserts The drill body accepts SPMG 0602 indexable inserts, allowing worn cutting edges to be rotated or replaced without discarding the tool body. This approach lowers running costs and minimises downtime compared with solid carbide alternatives. Compatibility with established insert suppliers such as Taegutec and YG-1 simplifies procurement and ensures ready availability of cutting edges for ongoing shop-floor use. Cutting length and chip control for through-hole work With a 64 mm cutting length, the tool is configured for efficient through-hole and deep pocket drilling where controlled chip evacuation is essential. The insert geometry and the body’s flute profile guide chips away from the cutting zone, which helps maintain consistent surface finish and extends the service interval of each insert. The result is fewer interruptions and a smoother production flow. Practical handling and installation benefits The shank length of 56 mm combined with the 25 mm diameter offers an established interface for rigid clamping systems, reducing the risk of chatter during higher feed rates. The tool’s moderate mass (0.33 kg) facilitates safe handling and easier changeovers at the machine, while the standardised insert pocket accepts widely used SPMG 0602 plates for straightforward maintenance and inventory management. Suited to workshop and industrial production Designed for workshops and industry users who require a reliable, indexable drilling solution, this drill body provides the technical basis for consistent hole-making with cost-conscious insert replacement. The construction supports efficient machining cycles and predictable performance, making it a practical choice for repeat jobs and batch production where both uptime and tool economy matter. For ordering or technical consultation on the Teknik Makina U716TM solid drill, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s specialists will advise on fitment and application Technical data Article number: U716TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Facts Diameter: 16 mm Overall length: 140 mm Cutting length: 64 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.33 kg Special features Compatible insert type: SPMG 0602 Compatible with Taegutec and YG-1 inserts Indexable-insert drill body Suitable for through-hole drilling operations FAQ Which insert type fits this drill body? The U716TM is designed for SPMG 0602 inserts; compatible manufacturers include Taegutec and YG-1. What are the main dimensions to consider for tool-holding? Key dimensions: Ø 16 mm diameter, 140 mm overall length, 64 mm cutting length, 25 mm shank diameter and 56 mm shank length. Can the inserts be replaced on the machine? Yes; the SPMG 0602 inserts are indexable and can be rotated or replaced when worn, following standard safety and tightening procedures from the insert supplier. Is this tool suitable for batch production? The U716TM’s combination of a rigid shank and indexable inserts supports consistent hole quality and economical insert replacement, making it appropriate for batch and repeat production. What benefits come from choosing an indexable drill body over a solid carbide drill? Indexable systems reduce per-hole tooling costs through insert rotation and replacement, simplify inventory by standardising insert types, and often enable longer tool-body service life compared with fully solid tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact, low-mass U-plate combines compatibility with 16 ER calipers and simple integration into measurement fixtures to improve setup speed and repeatability. Choose supply via Metav Werkzeuge for assured stock handling and workshop delivery. U-Platte – compact measurement plate, compatible with 16 ER calipers by Teknik Makina The U-Platte is a compact positioning plate intended for use in measuring fixtures and compatible with 16 ER calipers, offering a lightweight option for repeatable setups in workshop environments Compatible with 16 ER calipers Lightweight: 0.1 kg for easy handling Robust design by Teknik Makina Consistent measurement interfaces that reduce setup time The U-plate is designed to provide a defined interface for caliper-based measurements, which helps to increase repeatability in routine checks. Its compatibility with 16 ER calipers ensures straightforward integration into existing gauge arrangements and measurement jigs. By standardising the mounting point, the component reduces variability between successive operations and supports predictable measurement workflows, a clear advantage in serial inspection or frequent fixture changes. Lightweight construction for faster manual handling and fixturing With a mass of just 0.1 kg, the plate adds minimal inertial load to handheld or bench-mounted setups, enabling quicker alignment and repositioning during multi-point inspections. The low mass contributes to workshop efficiency by simplifying handling and decreasing operator fatigue during repetitive tasks. In practice, this means faster cycle times for manual gauges and less disturbance to delicate parts while measuring, which is particularly useful when tight process tolerances demand stable but agile fixturing. Clear specification and supply chain reliability Documented under SKU TA040TM, the component is supplied by Teknik Makina and intended as a practical accessory for measurement toolsets. The simple specification supports easy inventory management and rapid procurement decisions. Where detailed material data or additional mounting information is required, the SKU ensures unambiguous identification within procurement lists and parts catalogues, helping to maintain orderly stock and minimise procurement errors. For reliable supply and workshop-ready delivery of Teknik Makina measuring accessories such as this U-plate (SKU TA040TM), contact Metav Werkzeuge in Emmerich for order handling and logistical support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TA040TM Name: U-Platte Manufacturer: Teknik Makina Suitable for calipers: 16 ER Weight: 0.1 kg ECLASS: 21189290 Facts Weight (kg): 0.1 ECLASS (code): 21189290 Special features Product type: U-plate Intended application: caliper interface (16 ER) Manufacturer SKU: TA040TM FAQ What is the primary function of this plate? The U-Platte (TA040TM) serves as a compact positioning plate for caliper-based measurement fixtures, specified for use with 16 ER calipers. What is the weight of the component? The plate has a weight of 0.1 kg, which reduces added mass in manual and bench setups. Which calipers is the plate compatible with? Compatibility is documented for 16 ER calipers; compatibility with other models is not specified in the product data. What material is the plate made from? Material information is not provided in the available product data for the U-Platte (TA040TM). Are details on mounting or included accessories provided? No scope-of-delivery or mounting hardware details are listed in the supplied product information Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact locking solution with an M8 thread and a precise 17.1 mm diameter to guarantee repeatable clamping for measuring tools; order directly via Metav Werkzeuge or consult the team for application advice. Locking screw (Verriegelungsschraube) — M8 thread, 24 mm overall length (Teknik Makina) Locking screw (Verriegelungsschraube) for secure clamping on calipers and small fixtures; designed for workshop and precision-measurement applications M8 thread for secure fastening Compatible with 5 mm Allen key Compact 24 mm overall length Consistent clamping for precision measuring equipment The compact locking screw offers a straightforward way to secure sliding parts on measuring instruments and small fixtures. With an M8 thread and a 17.1 mm diameter, the design prioritises repeatability and stable clamping force, which reduces measurement variability during routine checks. In practice, a correctly specified thread and contact diameter mean fewer positional shifts under load, so measurement results remain consistent. Engineers and technicians working with calipers and comparable tools benefit from the predictable mechanical behaviour of this fastener. Simple installation and maintenance for busy workshops Installation requires only a 5 mm Allen key, making assembly and readjustment rapid and accessible at the bench. The 24 mm overall length ensures the component fits into compact assemblies without requiring modifications to the host instrument. The light weight contributes to minimal added mass on movable parts while still providing firm locking action. For teams aiming to streamline tool set-up and maintenance cycles, this fastener reduces downtime: quick access with a single tool and a straightforward thread engagement combine to save time in repetitive tasks. Engineered for reliability and easy procurement Manufactured by Teknik Makina, the component is designed for routine use in industrial and workshop environments. The plain, functional form supports a robust locking action and straightforward replacement when required. Buyers can rely on standard metric sizing—M8 and common Allen-key operation—so spare-part management is simplified and compatible with existing inventories. When precision instruments demand dependable securing elements, this locking screw provides a narrow, well-defined solution that integrates with standard calipers and measuring fixtures. For reliable clamping with Teknik Makina components, contact Metav Werkzeuge in Emmerich for stock and application guidance — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TC054TM Manufacturer: Teknik Makina Diameter: 17.1 mm Thread: M8 Overall length: 24 mm Weight: 0.1 kg ECLASS: 21189290 Suitable for calipers: 5 mm Allen key Product type: locking screw Design: compact locking fastener FAQ What tool is required to fit the locking screw? The locking screw is designed to be tightened with a 5 mm Allen key; this simple hex drive enables fast installation and adjustment. Is this fastener suitable for use on calipers? Yes, the component is specified for caliper applications and is listed as suitable for calipers with a 5 mm Allen key interface. What are the main dimensions of the part? The fastener features an M8 thread, a 17.1 mm diameter and a 24 mm overall length (SKU TC054TM). Which manufacturer supplies this locking screw? This locking screw is supplied by Teknik Makina and is offered through Metav Werkzeuge as the responsible distributor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High‑accuracy, repeatable holes are delivered by the combination of a Ø 17.5 mm cutting diameter and a rigid 25 mm shank, ensuring stable clamping and consistent runout behaviour; the tool’s insert compatibility keeps operating costs low and maintenance quick. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific inserts and delivery options. Indexable insert drill body U309TM – Ø 17.5 mm, 25 mm shank (Teknik Makina) The Indexable insert drill body U309TM is a compact drilling solution for metalworking setups that require replaceable SOMT 0602 inserts and precise hole control in repetitive production tasks Precision Ø 17.5 mm drilling capacity 25 mm shank for secure clamping Compatible with SOMT 0602 inserts Cutting length 51 mm, total 129 mm Stable holes for repeatable production results The drill body’s Ø 17.5 mm cutting diameter and robust 25 mm shank are aimed at delivering consistent hole quality across series production. The relatively short overall length and balanced mass of 0.318 kg reduce vibration and help maintain tool runout within tighter tolerances, which is essential for achieving good surface finish and accurate hole position. Because the design accepts indexable inserts rather than relying on regrinding the body, setup differences between operators are minimised and reproducibility improves across shifts. Flexible machining through an insert system Adaptability is provided by the use of SOMT 0602 indexable inserts, a standard geometry that allows selection of grades and chipbreakers to suit a range of tasks. Compatibility with Taegutec inserts means that insert choice can be tailored to workpiece material and cutting conditions, enabling longer tool life and simplified inventory: worn cutting edges are replaced quickly, rather than re‑grinding the whole tool body. This modular approach reduces downtime and delivers a clear cost advantage over single‑use tools in medium‑volume machining. Reduced downtime and easier handling at the bench With a cutting length of 51 mm and total length of 129 mm, the tool body combines manoeuvrability and useful reach for most workshop spindles while keeping the centre of mass close to the clamping point. The shank length 56 mm allows secure seating in a toolholder or chuck, and the moderate mass helps with quick manual changes. Maintenance is straightforward: insert changes are performed at the seat, avoiding complex disassembly and keeping machine idle time to a minimum, which supports higher overall equipment effectiveness. Practical guidance for selecting the right insert and use The drill body itself provides the mechanical platform; the final machining capability depends on the insert grade and geometry chosen. For tougher alloys, tougher grades and positive rake designs are typical, whereas finishing of softer materials may favour fine‑edge grades. The compatibility with Taegutec SOMT 0602 inserts gives access to a wide range of grades and coatings from a known supplier, enabling tailored performance without replacing the drill body. For specific material guidance or cycle recommendations, consult the technical team. For fast, reliable integration of Teknik Makina drilling technology into production, contact Metav Werkzeuge — our specialists at Metav Werkzeuge GmbH in Emmerich can advise on insert selection, availability and delivery; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U309TM Manufacturer: Teknik Makina Core measurements Diameter: 17.5 mm Total length: 129 mm Cutting length: 51 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.318 kg Special features Compatible insert: SOMT 0602 Insert supplier compatibility: Taegutec Product type: Indexable insert drill body FAQ Which insert type fits this drill body? The drill body accepts SOMT 0602 indexable inserts; Taegutec grades in this format are suitable for a wide range of applications with the U309TM tool body. What clamping diameter is required? A toolholder or chuck that accommodates a 25 mm shank is required to secure the U309TM correctly and maintain the specified runout performance. How long is the effective cutting length? The cutting length is 51 mm, which determines the maximum depth of hole achievable with the supplied cutting geometry. Can the U309TM be used for different materials? The drill body provides the mechanical platform; material suitability depends on the chosen insert grade — selecting the correct Taegutec SOMT 0602 grade will determine performance on specific alloys. Is the total tool length compatible with compact spindles? With a total length of 129 mm and a 56 mm shank length, the tool is designed to fit typical workshop spindles while keeping overhang moderate for stable cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precision and compatibility: the solid drill delivers a Ø 17.5 mm cutting diameter with a 25 mm shank and accepts SPMG 0602 indexable inserts for reliable holemaking. Order the tool directly via Metav Werkzeuge or contact their consultants for application advice. Solid drill U817-1TM — Ø 17.5 mm, 25 mm shank (Teknik Makina) A Solid drill U817-1TM engineered for metalworking with indexable SPMG 0602 inserts, built to provide stable, repeatable holemaking in production and repair workshops Ø 17.5 mm cutting diameter 25 mm shank for secure clamping Compatible with SPMG 0602 inserts 127 mm overall length for deeper holes Consistent, high-performance holemaking with indexable inserts The tool body is designed for stable chip control and predictable cutting forces, which improves cycle-time consistency in batch production. By using interchangeable SPMG 0602 indexable inserts the design separates cutting geometry from the holder, enabling rapid insert changes and reduced downtime. The combination of a compact cutting length 51 mm and a rigid body supports precision hole profiles while maintaining economical tooling costs through re-sharpenable or replaceable inserts. This approach suits machine shops that prioritise throughput and predictable tool life. Secure clamping and run-out control for reliable results A 25 mm shank and a carefully machined interface minimise run-out and vibration, translating into longer insert life and cleaner hole surfaces. The relatively small mass (approx. 0.318 kg) contributes to reduced spindle load while the 127 mm total length gives access to deeper bores without excessive overhang. Where concentricity and surface finish matter, the optimised shank diameter and mechanical tolerances of the toolholder reduce chatter and produce more consistent bore diameters over a production run. Flexible compatibility for workshop integration Compatibility with insert manufacturers such as Taegutec and YG-1 ensures a broad supply of cutting grades and geometries for varied materials and cutting conditions. The holder accepts the common SPMG 0602 format, allowing shops to select grades optimised for high-speed steel, coated applications or tougher alloy steels depending on the job. Selecting the correct insert grade delivers substantive improvements in tool life and productivity without changing the tool body, simplifying logistics and inventory. Practical benefits for procurement and maintenance planning The modular concept reduces long-term tool cost by limiting replacements to inserts rather than whole tools, while the compact cutting geometry makes the tool suitable for both single-part manufacturing and small-series production. The controlled cutting length and standardised interface streamline machine setup and promote consistent cycle times across different machines. For operations seeking to consolidate tooling without compromising capability, this drill body offers a pragmatic balance between performance and serviceability. For reliable supply and application support for the Teknik Makina U817-1TM, contact Metav Werkzeuge for technical consultation and ordering assistance at info@metav-werkzeuge.com or call +49 2822 7131930, where experienced advisors can confirm suitability for specific materials and machining centres Technical data Article number: U817-1TM Manufacturer: Teknik Makina Diameter: 17.5 mm Shank diameter: 25 mm Cutting length: 51 mm Shank length: 56 mm Total length: 127 mm Weight: 0.318 kg Compatible insert type: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 Product name: Solid drill SKU: U817-1TM FAQ What materials can this drill body be used with? The holder accepts SPMG 0602 indexable inserts; material suitability depends on the insert grade chosen. The Teknik Makina U817-1TM enables machining of common workshop metals when fitted with the appropriate insert. How does the 25 mm shank affect stability? A 25 mm shank provides a secure clamping interface that reduces run-out and vibration, improving repeatability and insert life for the U817-1TM tool body. Can inserts from different manufacturers be used? Yes, the tool is compatible with SPMG 0602 inserts from suppliers such as Taegutec and YG-1, offering flexibility in grade and geometry selection for the U817-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust indexable design, precise dimensions and secure toolholding to keep production runs consistent and cost-effective; order directly via Metav Werkzeuge or consult our specialists for cutting data and delivery. U145TM indexable drill body — 17.5 mm, 127 mm overall (Teknik Makina) The U145TM is an indexable drill body designed for medium-hole production and workshop milling applications, combining a compact overall length with a long cutting reach for stable, repeatable holemaking Indexable drill body for WCM-0302 inserts 17.5 mm diameter for medium-sized holes 51 mm effective cutting length 25 mm shank for stable toolholding Consistent hole quality and predictable cycle times The indexable design of this tool delivers repeatable hole geometry across production batches. With a 17.5 mm diameter and a 51 mm cutting length, the body is engineered to maintain concentricity and reduce runout when clamped correctly in a compatible holder. The combination of a substantial 25 mm shank and a 56 mm shank length provides stable toolholding, which lowers vibration and results in improved surface finishes and reduced burr formation. For operations that prioritise throughput, this translates into fewer tool changes and more predictable machining cycles. Efficient insert changes and lower running costs Designed for use with WCM-0302 inserts from Korloy, the system enables fast, secure insert indexing that reduces downtime. Indexable cutters keep the body in service longer while only the insert needs replacement, offering a clear cost-per-hole advantage versus solid carbide solutions in medium-diameter work. The insert coupling and geometry are optimised for chip control and consistent cutting engagement, which helps to extend insert life under recommended cutting parameters. Where frequent regrinds or insert swaps are standard, the result is measurable savings and less tooling inventory to manage. Integration with workshop toolholding and applications The drilling body is suited to a broad range of production setups where an indexable insert system is preferred. Compatibility with Korloy insert specifications ensures sourcing of replacement inserts is straightforward. The overall length of 127 mm keeps the assembly compact for most turret and spindle arrangements while still providing the necessary reach for through and blind-hole operations. The moderately light mass (0.336 kg) assists in smooth spindle dynamics, particularly on mid-range machines, and the design supports effective chip evacuation when used with appropriate coolant or air blast arrangements. Contact Metav Werkzeuge today for specific cutting parameters, availability and delivery options for the Teknik Makina U145TM indexable drill body and benefit from our regional stock and technical support in Emmerich Technical data Article number: U145TM Manufacturer: Teknik Makina Diameter: 17.5 mm Overall length: 127 mm Cutting length: 51 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.336 kg Indexable drill body design Compatible with WCM-0302 inserts Suitable inserts manufacturer: Korloy Brand: Teknik Makina FAQ What insert type does this drill body accept? The U145TM is designed for WCM-0302 indexable inserts; Korloy is listed as a suitable insert supplier for this drill body. Can the drill body handle through-coolant operation? The product data does not specify through-coolant capability; consult Metav Werkzeuge for testing and recommended coolant use with the U145TM. Which machines is this indexable drill intended for? This drill body suits standard milling and turning spindles compatible with a 25 mm shank and is aimed at medium-production environments requiring indexable insert tooling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-performance drilling for consistent production: the combination of a Ø 17.5 mm cutting diameter, 25 mm shank and 68 mm cutting length provides stable clamping and extended reach for medium-depth holes; order the indexable drill body directly via Metav Werkzeuge or request application advice from the technical team. Indexable drill body U409TM — Ø 17.5 mm, 25 mm shank by Teknik Makina The indexable drill body is a modular drilling solution for medium-depth holemaking that accepts SOMT 0602 indexable inserts and is engineered for secure clamping in standard 25 mm holders Compatible with Taegutec insert type SOMT 0602 Ø 17.5 mm drilling diameter for standard hole sizes 25 mm shank for secure machine-holder clamping Cutting length 68 mm for medium-depth operations Greater hole quality through rigid shank and defined cutting length The solid 25 mm shank and an overall length of 146 mm give a compact, well-balanced geometry that reduces lateral run-out and vibration. This rigidity translates into more consistent hole diameters and improved tool life when paired with appropriate inserts. With a cutting length of 68 mm, the tool is optimised for medium-depth drilling tasks where accuracy and repeatability matter most; the clearly defined cutting and shank lengths also simplify fixture setup and inspection processes. Faster cycle times with standardised insert compatibility Compatibility with SOMT 0602 inserts and manufacturer reference Taegutec enables quick insert changes and predictable cutting performance. The use of a standard insert format reduces downtime for regrinding or replacement and lowers per-hole tooling costs compared with non-indexable solutions. For workshops and production lines seeking reproducible results, this arrangement supports measurable efficiency gains and easier inventory management for cutting edges. Simple integration and predictable handling on the shop floor Measured data such as Ø 17.5 mm, shank length 56 mm and a weight of 0.348 kg make tool selection and balancing straightforward for CNC programmers and setup engineers. The modular concept permits immediate use with standard 25 mm holders and avoids bespoke adaptors; the clear numeric specifications support correct holder choice and minimise trial runs. Together, these points facilitate a reliable, economically sensible addition to a machining toolkit. Contact Metav Werkzeuge for tailored machining advice or to secure the Teknik Makina indexable drill body U409TM with Ø 17.5 mm and 25 mm shank — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U409TM Manufacturer: Teknik Makina EClass: 21180201 Suitable insert manufacturer: Taegutec Facts Diameter: 17.5 mm Overall length: 146 mm Cutting length: 68 mm Shank length: 56 mm Shank diameter: 25 mm Weight: 0.348 kg Special features Compatible with SOMT 0602 indexable inserts Accepts inserts from Taegutec SKU: U409TM FAQ Which insert type fits this drill body? The indexable drill body accepts SOMT 0602 inserts; Teknik Makina’s U409TM is specified for that insert format and is compatible with Taegutec versions. What are the key dimensions for machine setup? Important setup dimensions are Ø 17.5 mm drill diameter, 25 mm shank diameter and a shank length of 56 mm for clamping in standard holders; overall length is 146 mm. Can this tool be used for deep holes? The tool provides a cutting length of 68 mm, making it suited to medium-depth holes; for deeper drilling, consideration of chip evacuation and insert selection is required. Which machines is the tool suitable for? The body is designed for use in machine holders that accept a 25 mm shank and is suitable for machining centres and turret lathes that support indexable drilling systems. How does insert choice affect material suitability? Material compatibility depends on the chosen insert grade and geometry; the U409TM drill body accepts SOMT 0602 inserts, allowing selection of grades optimised for steel, stainless or non-ferrous materials Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, indexable solution that combines compatibility with CCMT 1204 inserts, a sturdy 40 mm shank and a wide bore capacity for efficient internal machining; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Boring Tool TKB150TM – for CCMT 1204 indexable inserts, 40 mm shank (Teknik Makina) The Boring Tool TKB150TM is engineered for internal turning operations using CCMT 1204 indexable inserts and is suited to bore diameters in the mid-range, providing a compact overall length for confined tooling spaces. Compatible with CCMT 1204 inserts 40 mm shank for secure toolholding Diameter range 170–250 mm Torx T20 clamping screw M5x12 Consistent results through insert compatibility and predictable performance Built to accept CCMT 1204 indexable inserts, the toolholder guarantees repeatable geometry and rapid tool changes, which translates into predictable cycle times and reduced setup complexity. Using standard insert formats simplifies stock management and makes replacement routine straightforward; the result is improved process stability and fewer unexpected interruptions in production. Stable clamping and robust dimensions for uninterrupted machining A 40 mm shank and a compact overall length of 154 mm create a rigid connection to the machine spindle, reducing vibration and enhancing tool life. The clamping system employs a Torx T20 key with an M5x12 screw for positive, reproducible tightening, supporting reliable cutting forces and consistent chip control. The weight of 5.011 kg contributes to inertia that helps maintain cutting stability during internal turning. Faster servicing and lower process overhead The use of standard screw sizes and insert geometry reduces maintenance time and the requirement for special tooling. Quick insert swaps and straightforward torque application with the Torx T20 expedite routine servicing, which supports higher machine availability. This focus on operational efficiency helps workshops lower downtime without compromising the quality of the bore finish. Practical use cases and workshop integration Designed for mid-diameter internal turning, the tool is suitable for production runs and maintenance workshops that require a dependable indexable solution with limited overhang. The defined 170–250 mm diameter capability, combined with the compact profile, allows easy integration into existing tool setups while keeping inventory manageable thanks to standardised inserts and fixings. For reliable supply and specific application guidance on the Teknik Makina TKB150TM boring tool, contact Metav Werkzeuge for tailored recommendations and logistics support via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: TKB150TM Manufacturer: Teknik Makina For inserts: CCMT 1204 Shank diameter: 40 mm Overall length: 154 mm Diameter range: 170–250 mm Weight: 5.011 kg Clamping screw: M5x12 (Torx T20) Core specifications Shank diameter: 40 mm Overall length: 154 mm Diameter range: 170–250 mm Weight: 5.011 kg Features Compatible with CCMT 1204 indexable inserts Torx T20 key interface Clamping screw M5x12 SKU: TKB150TM FAQ Is this tool compatible with CCMT 1204 inserts? Yes. The TKB150TM boring tool from Teknik Makina is designed specifically to accept CCMT 1204 indexable inserts for straightforward insert management. What shank diameter is required for this holder? The holder uses a 40 mm shank diameter, ensuring secure toolholding for internal turning tasks. What bore diameters can be machined with this tool? The tool covers a bore diameter range of 170–250 mm, making it suitable for mid-range internal machining applications. Which screw and key are used for insert clamping? Insert clamping is secured with an M5x12 screw tightened using a Torx T20 key for consistent torque and reproducible clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise deep-bore performance and reliable insert compatibility to keep production running smoothly; the combination of a 170 mm nominal diameter and a 208 mm overall length supports stable cutting in demanding internal turning operations. Order directly via Metav Werkzeuge or consult our specialists for tailored tooling recommendations. Boring Tool for CCMT 1204 Indexable Inserts — 170 mm Diameter, L208 The boring tool for CCMT 1204 indexable inserts is a heavy-duty internal turning solution intended for CNC lathes and conventional turning centres where wide-diameter boring and repeatable indexing are required. Compatible with CCMT 1204 inserts 170 mm nominal diameter for wide bores 208 mm overall length for deep reach Robust construction for vibration damping Precision and stability for large internal bores The design delivers consistent concentricity across extended bores by combining a substantial nominal diameter with a long shank. The 170 mm nominal size together with the 208 mm overall length provides the necessary reach for deeper internal operations while maintaining tool rigidity. This construction reduces deflection and improves surface finish on the workpiece, making the tool suitable for series production where repeatability is essential. The machining behaviour benefits from a stable cutting geometry that keeps insert engagement predictable, which in turn lowers rework rates and increases throughput. Faster indexable-insert changes and predictable tool life Using standard CCMT 1204 indexable inserts simplifies maintenance cycles and minimises downtime. Indexable inserts allow for quick rotation or replacement without the need to disturb the toolholder setup, which supports short setup times between batches. The system reduces per-part tooling costs because only the worn insert is replaced rather than the entire tool, and predictable insert seating ensures repeatable cutting data. For operations transitioning from conventional tooling, the insert format provides a straightforward route to improved productivity without complex requalification. Integration into workshop and CNC workflows The tool is engineered for straightforward integration with typical turning toolholders and boring assemblies, making it a practical choice for both dedicated machining cells and mixed-production shops. Compatibility with widely used insert geometries simplifies inventory management and aligns with lean tooling strategies. When planning fixture and holder selection, the tool’s dimensions and insert type should be matched to the machine’s turret or tool post to preserve rigidity and enable full utilisation of the tool’s cutting potential. Clear documentation of the tool’s technical parameters supports programming and process validation in industrial environments. Contact Metav Werkzeuge today for a tailored recommendation and availability check for the Teknik Makina boring tool TKB160TM to ensure optimal integration into the machining process. Technical Data Article number: TKB160TM Designation: Boring tool for CCMT 1204 indexable inserts Manufacturer: Teknik Makina Label: 170mm boring tool CCMT 1204 L208mm Eclass: 21181208 Key measurements Nominal diameter: 170 mm Overall length: 208 mm Maximum cutting diameter: 250 mm Special features Compatible inserts: CCMT 1204 Product type: Boring tool SKU: TKB160TM Category: Zerspanen FAQ What insert type does the tool use and why is it advantageous? The tool accepts CCMT 1204 indexable inserts; this insert format enables quick indexing, reduces downtime and simplifies spare-part management for series production. What are the typical applications for a 170 mm boring diameter? A 170 mm nominal bore is suitable for larger internal diameters on components produced on CNC lathes and conventional turning centres where stability and repeatable concentricity are required. Can the tool reach deep bores and still maintain rigidity? Yes, the 208 mm overall length is designed to access deeper internal features while the robust shank geometry helps maintain rigidity and reduce deflection during cutting. Is the tool suitable for automated production environments? The tool’s compatibility with standard insert geometry and predictable tool behaviour make it well suited to automated machining cells and serial production workflows. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable 25 mm shank, a 114 mm cutting length and CCMT 09T3 insert compatibility for reliable internal machining and reduced setup time. Order the (TKB114TM boring bar) directly via (Metav Werkzeuge) or ask our consultants if needed. Teknik Makina TKB114TM Boring Bar — Internal boring tool with CCMT 09T3 compatibility the TKB114TM boring bar is designed for accurate internal machining in production and workshop environments Compatible with CCMT 09T3 inserts Shank Ø25 mm for enhanced rigidity 114 mm cutting length for extended reach Overall length 170 mm for deep bore access Stable internal machining for consistent surface quality A robust shank diameter of 25 mm and a substantial 114 mm cutting length combine to deliver improved rigidity during internal operations. The design reduces vibration and deflection, which results in a more consistent surface finish and fewer rejected parts. By limiting tool movement under load, the holder supports repeatable bore geometry and steadier cycle times, which in turn lowers the need for downstream rework and improves process reliability in serial production. Faster cycles and lower downtime through insert compatibility Compatibility with CCMT 09T3 indexable inserts allows quick insert changes and straightforward re-grading of cutting edges, supporting rapid tool maintenance and minimal machine downtime. The tool’s 170 mm overall length provides the reach required for many internal bores while the balanced mass of 0.991 kg aids in handling and stability during mounting. Together, these attributes support productivity gains and pragmatic cost-efficiency by shortening changeover time and keeping machining operations moving. Practical handling and workshop integration The boring bar’s form factor is optimised for routine workshop workflows: a clearly defined shank diameter and standard insert interface simplify tool selection and inventory management. The holder fits established insert types, easing procurement and reducing the need for special tooling. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component arrives ready for integration on compatible tool posts and internal turning setups, backed by an experienced European supply chain. Confidence through trusted supply and service Sourcing via Metav Werkzeuge adds a pragmatic layer of assurance: long-standing distribution expertise, a large stocked range and central logistics from Emmerich support reliable replenishment and quality control. This combination of precise tooling and dependable supply reduces procurement risk and helps maintain continuous production—an advantage for workshops and small series manufacturers seeking affordable precision without compromise. For tailored advice on integrating the Teknik Makina TKB114TM into existing setups or to arrange supply from our Emmerich hub, contact Metav Werkzeuge by email or phone for a fast, expert response. Technical data Article number: TKB114TM Manufacturer: Teknik Makina Weight: 0.991 kg Shank diameter: 25 mm Cutting length: 114 mm Overall length: 170 mm Compatible inserts: CCMT 09T3 Max cutting diameter: 48 mm Numbers / Core technical data Shank Ø: 25 mm Cutting length: 114 mm Overall length: 170 mm Max cutting diameter: 48 mm Weight: 0.991 kg Special features / Versions Indexable insert interface CCMT 09T3 Designed as an internal boring bar Brand: Teknik Makina SKU: TKB114TM FAQ Which inserts fit this boring bar? The TKB114TM accepts CCMT 09T3 indexable inserts; this interface permits fast insert changes and use of standard grades. What reach does the holder provide for internal bores? With an overall length of 170 mm and a cutting length of 114 mm, the bar is suited to many medium-depth internal machining tasks. How does the TKB114TM improve stability during machining? The 25 mm shank diameter increases rigidity, reducing vibration and promoting consistent bore quality when the holder is correctly mounted. Is the TKB114TM available through Metav Werkzeuge? Yes; Teknik Makina tooling including the TKB114TM is supplied via Metav Werkzeuge and supported by their European logistics network. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a robust M16 threaded connection, a compact 32 x 32 mm shank and a 170 mm overall length ensures stable turning performance and simple integration into existing tooling setups; order the clamping holder directly via Metav Werkzeuge or ask the consultants if needed. Clamping holder L170 mm – M16 threaded toolholder by Teknik Makina The clamping holder L170 mm is a compact toolholder for lathe turning applications, designed for right-hand cutting and standardised mounting in workshop and industrial turning stations. Robust M16 threaded connection and seating Right-hand cutting with a 93° cut angle 32 x 32 mm shank for rigid clamping M5x26 screw fastening with Allen key supplied Exceptional rigidity for consistent turning results The holder is engineered to deliver stable tool support under load, with a sturdy M16 threaded interface and a defined 170 mm overall length that balances reach and stiffness. The 32 x 32 mm shank provides a secure seating in standard toolposts, reducing vibration and improving surface finish. For shop managers and production planners this translates into fewer scrap parts and more predictable cycle times, since the component’s geometry and mass distribution (weight 1.349 kg) are selected to favour rigidity during turning operations. Precise geometry for reliable alignment and cutting direction Built to the ISO-conforming profile ISO 3232, the toolholder supports exact positioning of the cutting head and predictable chip flow. The cutting head is dimensioned with a 40 mm head width and 45 mm cutting height, while the tool is configured for right-hand cutting with a 93° cutting angle to suit common turning tasks. Fixings are secure thanks to the M5x26 clamping screw and the supplied Allen key (size 3), enabling straightforward replacement and repeatable seating without special tools. These features simplify set-up on both manual lathes and CNC turning centres. Designed for efficient workshop use and maintenance Maintenance is minimised by the straightforward screw clamping system and standardised interfaces, making the holder suitable for both single-shift workshops and continuous production environments. The compact head and standardised 32 x 32 mm shank allow rapid tool changes and consistent cutting geometry across different machines. Traceability and ordering are supported by the article code D105-4TM, enabling accurate stock management and fast reordering. The overall specification prioritises long service life and easy integration into existing tooling inventories. Request a technical quotation from Metav Werkzeuge for the Teknik Makina clamping holder (SKU D105-4TM) — contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance from our Emmerich team Technical data Article number: D105-4TM Brand: Teknik Makina E-class: 21181004 Product type: Clamping holder ISO designation: 3232 Facts Overall length: 170 mm Weight: 1.349 kg Thread: M16 Shank width x height: 32 x 32 mm Cutting head width: 40 mm Cutting height: 45 mm Cutting angle: 93° Cutting direction: right Screw: M5x26 Allen key: size 3 Special features Right-hand cutting configuration Standardised ISO 3232 shank profile M16 threaded connection for secure mounting Designed for lathe turning applications Compact head for improved access in tight setups FAQ What machines is this holder compatible with? This clamping holder is compatible with lathes and turning centres that accept ISO 3232 shanks and an M16 threaded mounting, making it suitable for both manual and CNC turning equipment. Is the cutting direction reversible? The holder is specified for right-hand cutting; reversing the cutting direction would require a different toolholder geometry. Which fasteners and tools are supplied for mounting? The product includes the M5x26 clamping screw and an Allen key (size 3) for assembly and secure fastening. How does the holder affect surface finish and vibration? The 32 x 32 mm shank combined with the M16 threaded interface improves seating rigidity and reduces vibration, which typically leads to a more consistent surface finish and better dimensional accuracy. How can the item be identified for reordering? Use the article number D105-4TM and the brand Teknik Makina when reordering to ensure the correct clamping holder version is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com