10mm Clamping Screw M6 For 6mm Collet Chuck, Short Length - TECWERK
Take advantage of a compact M6 threaded fastener with a 10 mm overall length that secures cylindrical-shank tools reliably in 6 mm chucks; the combination of standard-compliant driving flat and compact dimensions supports efficient tool changes and stable machining. Order the clamping screw directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw M6 L 10 mm for 6 mm chuck – TECWERK The Clamping screw M6 L 10 mm for 6 mm chuck is a compact clamping bolt for face clamping chucks, designed to hold cylindrical-shank tools with a lateral driving flat in accordance with DIN 1835-B *Designed for face clamping chucks *Clamps cylindrical shank tools DIN 1835-B *Thread M6, length 10 mm for 6 mm chuck Secure, compact design for tight tool retention The compact fastener offers a 10 mm overall length combined with an M6 thread, delivering a secure hold for small-diameter chucks. Its short profile minimises overhang and reduces vibration risk during operations, which is essential when machining with delicate or precision tools. The built-in compatibility with 6 mm chucks and the lateral driving flat ensure positive torque transmission to cylindrical-shank cutters, translating into consistent concentricity and repeatable clamping forces even under cyclic load. Clear technical compatibility and standard conformity Engineered for face clamping chucks, the component is suitable for clamping tools with cylindrical shanks that include a lateral driving flat according to DIN 1835-B. This means the fastener is appropriate for commonly used cutting tools and holders in clamping-technology setups where standardised drive flats ensure correct orientation and secure engagement. The nominal thread M6 and the specified dimensions enable straightforward integration into existing clamping systems without additional modification, supporting fast tool swaps and predictable performance. Practical benefits for workshop efficiency and reliability By choosing this compact clamping bolt, workshops gain a durable and predictable fastening solution that supports efficient changeovers and stable machining results. The simple geometry reduces maintenance effort and inspection time, while the adherence to recognised standards reduces the risk of mismatch with tool shanks. For procurement and supply reliability, Metav Werkzeuge’s sourcing provides a consistent quality check and rapid dispatch from Emmerich, reinforcing operational continuity for industrial and craft applications. For secure and standard-compliant tool clamping select the TECWERK clamping screw for 6 mm chucks — contact Metav Werkzeuge in Emmerich for ordering and technical guidance: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000834134NW Label: Clamping screw M6 L 10 mm for 6 mm chuck TECWERK Product type: Clamping screw Manufacturer: TECWERK Facts Length: 10 mm Thread nominal Ø: M6 Suitable for chuck Ø: 6 mm Pack unit: 1 Special features For face clamping chucks For cylindrical shank tools with lateral driving flat Complies with DIN 1835-B Compact profile for reduced overhang FAQ Is this clamping screw suitable for face clamping chucks only? This clamping screw M6 L 10 mm for 6 mm chuck is primarily designed for face clamping chucks and provides optimal performance in that application, particularly with tools featuring a lateral driving flat. Which tool shank standard does the fastener support? The fastener clamps cylindrical-shank tools with a lateral driving flat in accordance with DIN 1835-B, ensuring correct torque transmission and orientation. What are the critical dimensions to verify before ordering? Check the M6 thread, the 10 mm overall length and compatibility with a 6 mm chuck bore to confirm the part fits the intended clamping system. Can this clamping screw be used with adapters or non-standard chucks? Use with adapters is possible when thread and bore align; however, optimal performance is achieved when used with chucks and tools that meet the stated dimensions and DIN 1835-B specification. Does the SKU 2000834134NW include multiple items per pack? The SKU 2000834134NW is supplied with a pack unit of 1, suitable for targeted replacements or single-item procurement. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm Clamping Screw M8 for 8mm Collet Chuck, DIN 1835-B - TECWERK
Compact, M8-threaded fastening combined with compatibility for 8 mm collet chucks ensures reliable tool retention and rapid replacement in busy workshops; this compact design supports uninterrupted production and straightforward inventory management. Order the TECWERK component via Metav Werkzeuge or consult our specialists for application advice. TECWERK Clamping screw M8 L10 mm — clamping screw for 8 mm collet chucks The Clamping screw M8 L10 mm secures tools with a cylindrical shank and lateral drive surface, intended for use in face clamping chucks and compact spindle applications. M8 threaded fastening Compact length 10 mm For 8 mm collet chucks DIN 1835-B compatible for cylindrical shanks Secure retention for compact installations The TECWERK clamping screw combines an M8 thread with a 10 mm overall length to deliver secure clamping in tight assemblies. Its short profile reduces axial projection while maintaining axial load transfer, which helps to avoid interference in confined spindle or toolholder layouts. For production environments where space and repeatability matter, the compact dimensions provide a dependable balance between accessibility and mechanical stability. Standards and compatibility explained Designed for tools with a cylindrical shank and a lateral drive surface in accordance with DIN 1835-B, this fastening element is optimised for 8 mm collet chucks and face clamping systems. Conforming to that standard ensures consistent engagement with toolholders that rely on the specified lateral slot or drive face, simplifying tool interchange and aligning with common machining tool dimensions used across industry. Production benefits and process reliability Using a dedicated clamping screw with standardised thread and length reduces setup time and inventory complexity while improving process reliability. The simple M8 interface supports quick replacement during maintenance cycles, reducing machine downtime and ensuring steady throughput. By standardising on compact fastening components, workshops can streamline procurement and minimise the risk of incorrect parts entering the toolchain. Practical application and handling notes Installation requires the correct engagement with the chuck and the matching lateral drive on the tool shank; when assembled, the component transmits axial clamping force while the lateral surface prevents rotation. The 8 mm chuck compatibility and DIN 1835-B conformity make this item suitable for general-purpose facing and finishing operations where secure radial alignment and repeatable seating are essential. For procurement and technical guidance on integrating TECWERK clamping screws into workshop setups, contact Metav Werkzeuge for specification support and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000834135NW Label: Spannschraube M8 L.10mm f.Spannfutter-D.8mm TECWERK SKU: 2000834135NW Facts Thread: M8 Length: 10 mm Suitable for collet chuck Ø: 8 mm Packing unit: 1 Special features For face clamping chucks For tools with cylindrical shank and lateral drive surface (DIN 1835-B) Product type: Clamping screw Manufacturer: TECWERK FAQ What thread and length does this fastening use? The TECWERK clamping screw is supplied with an M8 thread and an overall length of 10 mm. Which chucks is the component suitable for? It is suitable for collet chucks with an 8 mm bore and for face clamping chuck arrangements. What tool shank form is required for correct engagement? Compatibility requires a cylindrical shank with a lateral drive surface in line with DIN 1835-B. Is the compact length suitable for tight spindle installations? Yes, the short 10 mm profile reduces axial projection and is intended for compact or space-constrained setups where secure clamping is still required. What is the item number for ordering? The item is listed under SKU 2000834135NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
120mm Machine Foot Size 2 Zinc-Plated, M16 x 1.5 x 120 Thread - TECWERK
Take advantage of a zinc-plated levelling mount with a M16 x 1.5 x 120 mm threaded stud and a Ø 120 mm support plate for secure, vibration-isolating support; suitable for lathes, milling machines and saws. Order the part directly via Metav Werkzeuge or consult the advisors for sizing and supply. ALBRECHT machine foot Size 2 – zinc-plated levelling mount, M16 thread (TECWERK) The ALBRECHT machine foot Size 2 is a zinc-plated levelling mount designed to provide stable support and vibration isolation for heavy workshop machinery such as lathes and milling equipment Zinc-plated for corrosion protection Threaded stud M16 x 1.5 x 120 mm Ø 120 mm base with 18 mm levelling travel Max static load 400–1000 kg per foot Secure levelling and dual vibration isolation The zinc-plated mount provides a dependable support platform, combining a M16 x 1.5 x 120 mm threaded stud with a Ø 120 mm base to distribute loads evenly across the shop floor. The specification lists a max static load of 400–1000 kg per foot and an overall installed height of 49 mm, delivering the mechanical stability required for precision operations. By isolating vibrations from the machine to the environment and shielding precision machines from external disturbances, this levelling mount helps preserve component tolerances and maintain consistent machining results. Correct sizing and straightforward installation for reliable operation Determining the right mount is a simple, rational process: establish the total machine mass, divide by the number of fixing points and compare the result with the foot’s rated load. The unit’s 18 mm levelling travel allows for fine adjustment on uneven floors, while the threaded stud simplifies secure attachment to machine bases. Proper selection and installation reduce wear on bearings and guides, lower the risk of misalignment and support uninterrupted production by preventing micro-movements and tilt during machining cycles. Durable finish and workshop-ready versatility A corrosion-resistant finish and a broad bearing surface make this levelling mount suitable for heavy-duty workshop environments where coolant, dust and humidity are present. The Ø 120 mm support plate resists indentation and spreads load over a larger area, reducing point loading on shop floors. Maintenance is minimal: scheduled inspections of the levelling plate and thread ensure ongoing performance, while the robust design contributes to long service life and dependable machine placement in both general engineering and precision workshops. For reliable levelling and effective vibration control, choose the TECWERK ALBRECHT machine foot Size 2 and contact Metav Werkzeuge for expert advice and dependable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000832073NW Label: Maschinenschuh Gr. 2 ALBRECHT Product type: Maschinenschuh Manufacturer: TECWERK Packaging unit: 1 Facts Ø D: 120 mm Height incl. levelling plate H: 49 mm Levelling travel N: 18 mm Threaded stud G: M16 x 1.5 x 120 mm Max static load per foot: 400–1000 kg Special features Zinc-plated finish Suitable for lathes, milling machines, saws and other machines Dual vibration isolation (machine-to-environment and external-to-machine) Simple sizing via weight divided by number of fixing points FAQ What static load can each mount support? The ALBRECHT machine foot Size 2 is rated for a max static load of 400–1000 kg per foot; the allowable load per mounting depends on the machine’s total weight and the number of fixing points. How much levelling adjustment is available? This levelling mount offers 18 mm of levelling travel and an installed height of 49 mm, allowing for fine height correction on uneven floors. Is the finish suitable for humid or coolant-prone environments? The zinc-plated finish on the ALBRECHT mount provides increased resistance to corrosion, making it appropriate for workshop conditions with occasional coolant exposure or higher humidity. Which machine types are appropriate for this levelling mount? The levelling mount is suitable for heavy workshop equipment such as lathes, milling machines and saws, where stable positioning and vibration isolation improve process stability. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
12mm Clamping Screw M10 for 10mm Chuck - TECWERK
Take advantage of the M10 threaded interface and a compact 12 mm overall length for secure, space-saving clamping; ideal for 10 mm chucks and tools conforming to DIN 1835-B. Order the clamping screw directly via Metav Werkzeuge or ask our consultants for application advice. Spannschraube M10 L.12mm f.Spannfutter-D.10mm TECWERK — clamping screw with M10 thread for 10 mm chucks The Spannschraube M10 L.12mm f.Spannfutter-D.10mm TECWERK is a precision clamping screw intended for face clamping chucks and for securing tools with a cylindrical shank and lateral drive face according to DIN 1835-B, optimised for compact toolholding assemblies M10 threaded clamping screw Compact 12 mm overall length Compatible with 10 mm chuck diameters Suitable for tools to DIN 1835-B Precise thread engagement for repeatable setups The M10 thread offers secure mechanical engagement with standard clamping bodies, reducing axial play and helping to maintain repeatable positions across production runs. With adherence to DIN 1835-B for tools with a lateral drive face, the design ensures a reliable interface between the tool shank and the chuck, which translates into consistent concentricity and predictable machining outcomes. This controlled connection reduces setup variability and supports stable running conditions for short, frequent tool changes. Space-saving length that suits compact toolholders A total length of 12 mm keeps the clamping element compact without compromising its clamping function, making it particularly suitable where installation depth is limited. For chucks with a 10 mm bore diameter, this compact profile permits close tool spacing and improves accessibility in tight spindle or turret arrangements. The reduced projection minimises collision risk during tool indexing and contributes to a neater tool assembly that supports faster changeover cycles. Broad compatibility to simplify workshop logistics Designed for use with face clamping chucks, the component accommodates tools featuring a cylindrical shank and lateral drive face, facilitating straightforward integration into existing fixtures. Compatibility with common chuck systems lowers the need for special adaptors and helps standardise spares across a fleet of machines. The clear conformity to established standards makes this clamping element a pragmatic choice for workshops seeking to reduce part variety while maintaining operational flexibility. Practical benefits for production efficiency Choosing a compact, standardised clamping screw improves uptime through quicker installation and dependable clamping force, which in turn reduces rework and inspection effort. The simple geometry and standard M10 interface support fast replacement and interchangeability, helping to keep machine downtime to a minimum. For further clarification on suitability for a particular chuck or application, technical advice is available to ensure correct selection and integration. For tailored advice on integrating this TECWERK clamping screw into existing toolholding systems, contact Metav Werkzeuge for expert guidance and sourcing assistance Technical Data Article number: 2000834136NW Label: Spannschraube M10 L.12mm f.Spannfutter-D.10mm TECWERK Brand: TECWERK Facts Thread: M10 Overall length: 12 mm Recommended chuck Ø: 10 mm Packaging unit: 1 Special features For face clamping chucks For clamping tools with cylindrical shank with lateral drive face Conforms to DIN 1835-B Suitable for compact toolholding assemblies FAQ What thread does the clamping screw use? The clamping screw uses an M10 thread, matching standard clamping bodies for stable engagement. Is this component suitable for a 10 mm chuck? Yes, the clamping screw is designed for 10 mm chuck diameters and compact assemblies. Which tool shank standard is supported? The component supports tools with a cylindrical shank and lateral drive face in accordance with DIN 1835-B. Can this part be used across different face clamping chucks? It is intended for use with face clamping chucks and is compatible with systems that accept an M10 clamping element for 10 mm bores. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
12mm Coolant Supply Tube HSK 63 DIN 69893 Form A M18 x 1.0, L34.5mm - TECWERK
Reliable coolant delivery for precision HSK setups is achieved by the combination of a 12 mm internal bore and an M18 x 1.0 threaded connection with an integrated sealing ring; order the part directly via Metav Werkzeuge or contact our consultants for fitment advice. Coolant transfer pipe HSK 63 – M18 x 1.0 thread, 12 mm bore (TECWERK) A coolant transfer pipe HSK 63 engineered for secure coolant routing in hollow-shank taper tool systems, compliant with DIN 69893 Form A and intended for precise machining environments For HSK 63, DIN 69893 Form A 12 mm internal bore for steady coolant flow M18 x 1.0 external thread with sealing ring Length 34.5 mm, compact installation Consistent coolant flow to protect cutting edges and tool life A stable supply of cutting fluid directly to the tool is a decisive factor for tool life and process stability. The 12 mm internal bore is calculated to maintain a continuous flow rate under pressure, reducing thermal peaks at the cutting edge and lowering the risk of premature wear. Conformity with DIN 69893 Form A ensures mechanical compatibility with standardised holders, while the functionality of internal coolant routing supports higher metal removal rates and improved surface finish. These performance advantages translate into fewer tool changes and steadier cycle times on the shop floor. Compact, secure installation that minimises downtime The external M18 x 1.0 connection and included sealing ring provide a straightforward mechanical interface for assembly into HSK tool holders. With a total length of 34.5 mm, the component fits compact toolholder geometries without creating interference, enabling quick replacement or retrofitting in confined spindle environments. The threaded connection guarantees repeatable positioning and leak-free operation once fitted correctly, which reduces the need for frequent maintenance interventions and supports continuous production runs. Industry-compliant design and supply reliability Manufactured for hollow-shank taper applications in line with ISO 12164 standards, this transfer tube is tailored for precision tool systems where standard conformity matters. The compact design facilitates integration into existing coolant circuits while retaining measurable, comparable specifications for procurement and inspection. For buyers seeking reliable sourcing, TECWERK supplies the part with clear identification, and Metav Werkzeuge acts as a trusted distribution partner, offering consolidated procurement and dependable delivery from Emmerich. For a precise fit in HSK 63 holders and reliable coolant routing, request technical advice or availability from Metav Werkzeuge; Metav’s team can confirm compatibility and dispatch the part promptly from Emmerich. Technical data Article number: 4000832712NW Manufacturer: TECWERK Product type: Coolant transfer pipe Tool interface: HSK 63 Standard: DIN 69893 Form A Core specifications Internal diameter: 12 mm Total length: 34.5 mm Thread: M18 x 1.0 Packaging unit: 1 Special features For hollow shank taper tools ISO 12164 (DIN 69893) Form A Supplied with sealing ring Compact design for tight toolholder geometries FAQ Is this part compatible with HSK 63 toolholders? Yes. The coolant transfer pipe is made for HSK 63 interfaces and complies with DIN 69893 Form A; the SKU is 4000832712NW for reference. What are the thread and internal bore sizes? The component features an M18 x 1.0 external thread and a 12 mm internal bore, with a total length of 34.5 mm. Does the delivery include a sealing ring? Yes. The transfer pipe is supplied with a sealing ring to ensure leak-free installation when fitted into a compliant holder. Can this be used with hollow-shank taper tools to feed internal coolant? Yes. It is designed specifically for hollow shank taper tools in accordance with ISO 12164 (DIN 69893) Form A. Is the material of the component specified? No material information is provided for this SKU; refer to the supplier for material confirmation if required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
136mm HSK 63 Coolant Transfer Tube Key, Total Length 136mm - TECWERK
Robust engagement for HSK 63 connections and a 136 mm working length deliver reliable handling and improved service times; order supply or request advice directly through Metav Werkzeuge for fast fulfilment. Key HSK 63 for coolant transfer pipes, 136 mm — TECWERK Key HSK 63 for coolant transfer pipes is a precision service key designed to engage and secure coolant transfer pipes in HSK 63 tool holders, offering a compact 136 mm overall length suited to maintenance and workshop servicing. Compatible with HSK 63 tool holders Designed for coolant transfer pipes Overall length 136 mm for accessible reach Reduced downtime through precise engagement A correctly matched engagement tool minimises the risk of misalignment and wear when handling coolant lines in tool holders. The HSK 63 interface ensures a consistent contact geometry, which reduces slippage and the chance of damaging the transfer connection. By using a dedicated service key, maintenance operations become more predictable and repeatable, so machining cycles return to normal faster and costly interruptions are less frequent. This benefit is especially relevant in production environments that demand tight tolerances and steady coolant delivery. Better access and ergonomics for routine servicing With an overall length of 136 mm, the service key provides enough reach to work comfortably within the recesses of HSK tool holders while remaining compact for quick tool changes. The length balances accessibility and control, allowing technicians to manipulate coolant transfer pipes with minimal repositioning. Improved handling reduces task time and physical strain during repetitive servicing procedures, supporting efficient workshop workflows and safer operation around spindle areas. Seamless integration into maintenance workflows The tool is specified for the engagement of coolant transfer pipes and fits the HSK 63 standard, enabling straightforward incorporation into existing tool sets. Packaged as a single unit, it complements other HSK service items and helps standardise the maintenance kit for machines using this interface. Standardisation lowers training effort and streamlines spare-part management, contributing to a leaner inventory and fewer procurement steps across the workshop. For procurement teams requiring precise HSK 63 engagement and reliable handling of coolant transfer pipes, contact Metav Werkzeuge for supply and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832716NW Product type: Key Manufacturer: TECWERK SKU: 4000832716NW Facts Overall length: 136 mm Key size: HSK 63 Packaging unit: 1 Special features For coolant transfer pipes Suitable for HSK 63 tool holders Service key for maintenance applications FAQ Is the key compatible with standard HSK 63 tool holders? The key is specified for HSK 63 connections and is compatible with standard HSK 63 tool holders; reference SKU 4000832716NW for ordering. What is the working length and why does it matter? The overall length is 136 mm, which provides access into the tool-holder recess while keeping handling compact for routine servicing. Can this tool be used for coolant line replacement and adjustment? Yes, the service key is designed to engage coolant transfer pipes for secure handling during replacement or adjustment operations. How is the item supplied for inventory management? The tool is supplied as a single unit (packaging unit 1), making it easy to add to maintenance kits and spares lists. Who manufactures the key and where can further product details be found? The product is offered under the brand TECWERK; use article number 4000832716NW for precise identification and procurement. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Drawbar Pull Stud With Bore, ISO 7388-3 Form AD DIN 69872 Form A, SK50 Thread M24 - TECWERK
Take advantage of a hardened, standardised retention solution that ensures consistent clamping with steep‑taper toolholders and straightforward replacement logistics; the combination of proven ISO compatibility and measured heat treatment supports longer service life and predictable maintenance intervals. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Retention knob ISO 7388-3 Form AD for SK50 (with bore) — TECWERK A retention knob designed for SK50 steep‑taper toolholders, compliant with ISO 7388‑3 Form AD and DIN 69872 Form A, for secure spindle clamping in heavy‑duty machining Hardened to 58± HRC for wear resistance M24 thread, ground for repeatable seating Parallel ground and blued finish for corrosion protection ISO 7388‑3 Form AD compatible with DIN 69872 Form A Secure clamping for steep‑taper toolholders The retention knob fulfils the primary need for secure, repeatable clamping of toolholders with a steep taper according to DIN 69871. Fitted to an SK50 taper, the component transfers axial pull‑out force from the spindle drawbar to the toolholder body; this results in consistent seating and minimised run‑out during machining. Specified to ISO 7388‑3 Form AD (equivalent to DIN 69872 Form A), the part ensures interchangeability across compliant systems, reducing setup time and the risk of incompatibility when replacing worn or damaged knobs. Durable construction that reduces maintenance intervals Heat treatment to 58± HRC with a controlled case depth of 0.5–0.8 mm provides a hard wearing surface at the contact zones while retaining a tough core to resist impact loads. The thread is soft‑ground to DIN tolerances to preserve engagement accuracy, and the stem is parallel ground then brünniert (blued) to offer basic corrosion protection and smooth insertion. These manufacturing steps combine to reduce fretting and galling at the clamping interface, which in turn lowers the frequency of replacements and supports uninterrupted production cycles. Clear dimensional data for correct selection and fitting Key dimensions are measured and stated to help confirm suitability for specific toolholder assemblies: M24 thread, overall length L1 74 mm, shoulder length L2 34 mm, and diameters d1 28 mm, d2 21 mm, d3 25 mm, d4 11.5 mm. Such figures allow quick cross‑checking against machine and toolholder drawings so that the correct retention geometry is chosen on first attempt. The standardised form designation further assists procurement and inventory management by matching items to existing ISO and DIN references. Operational benefits that support workflow efficiency By specifying a component that is standardised, hardened and finish‑treated, workshops gain predictable service intervals and consistent clamping performance — two factors that contribute directly to process stability and quality output. The standard form and thread mean spares can be stocked without bespoke machining or fitting, shortening downtime when a replacement is required. Coupled with Metav’s distribution and quality‑filtering approach, the solution supports reliable supply and reduces administrative overhead for maintenance planners. For technical enquiries or to source TECWERK retention knobs directly, contact Metav Werkzeuge for application advice and reliable delivery from Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s precision‑focused team will recommend the best option for specific spindle and toolholder combinations Technical data Article number: 2000832701NW Label: Anzugsbolzen ISO 7388-3 Form AD SK50 m.Bohr.TECWERK Manufacturer: TECWERK Product type: Retention knob Numbers / Core technical data Thread: M24 L1: 74 mm L2: 34 mm d1: 28 mm d2: 21 mm d3: 25 mm d4: 11.5 mm Hardness: 58 ± HRC Case depth: 0.5–0.8 mm Standard: ISO 7388-3 Form AD (DIN 69872 Form A) Special features / Design For toolholders with steep taper per DIN 69871 Hardened in service for wear resistance Thread soft‑ground to DIN tolerances Parallel ground and blued finish Supplied with bore for fitting Compatible with SK50 taper assemblies FAQ What taper types is this retention knob compatible with? The retention knob is intended for SK50 steep‑taper toolholders and is designed for use where DIN 69871 tapers are specified; the ISO 7388‑3 Form AD geometry matches compliant systems. What does the heat treatment specification mean for service life? A hardness of 58± HRC with a case depth of 0.5–0.8 mm gives a hardened wearing surface while preserving a tough core, which improves resistance to wear and helps extend the interval between replacements of the retention knob. Can the M24 thread be used in all drawbar systems? The M24 thread and soft‑ground machining follow DIN practices for accurate engagement; compatibility depends on the spindle drawbar thread and the toolholder assembly — confirm the M24 specification against machine documentation. How does the ISO form designation affect interchangeability? The ISO 7388‑3 Form AD designation (corresponding to DIN 69872 Form A) guarantees a standard geometry so the retention knob can be replaced with the same form across machines and suppliers without custom adaptation. Are the dimensions suitable for inventory management? Yes — stated dimensions (L1, L2, d1–d4) allow direct cross‑reference with toolholder drawings and support standard spare‑parts stocking for maintenance planning. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm HSK63 Tool Holder Table Block 15-Slot, Polypropylene, Acid and Coolant Resistant - TECWERK
Take advantage of a compact, chemical‑resistant polypropylene table block that organises HSK63 tool fittings while remaining lightweight and robust; order the tool directly via Metav Werkzeuge or ask our consultants for application advice. Tool holder HSK63 polypropylene table block – 15-place, compact footprint (TECWERK) The tool holder HSK63 polypropylene table block is a compact storage solution designed to keep HSK63 tool fittings organised and protected at the workstation or in CNC toolrooms. HSK63-compatible storage system Polypropylene, chemical-resistant construction Impact- and shatter-resistant design Compact footprint 360 x 245 x 150 mm Lightweight at 360 g Organised storage that speeds up workflow A dedicated table block for HSK63 shanks ensures fast access to frequently used tool fittings, reducing search time and supporting a smoother production flow. The design focuses on clear tool allocation and quick visual identification, which helps standardise tool handling across a bench or toolroom. With a layout for multiple positions, the block improves inventory control and keeps the working area tidy while supporting consistent machining setup routines. Durable, chemically resistant material for workshop use Manufactured from polypropylene, the block combines low weight with high resistance to common workshop fluids. The acid- and coolant-resistant composition means the unit endures exposure to cutting fluids without degrading, while the impact- and shatter-resistant properties reduce the risk of damage during daily handling. For maintenance staff and production teams, this translates into a storage solution that remains serviceable under typical industrial stresses and simplifies cleaning and chemical exposure management. Practical dimensions and ergonomic handling With a compact footprint of 360 x 245 x 150 mm and a gross mass of 360 g, the storage block is easy to position on benches, inside cabinets or close to a CNC machine for immediate access. The moderate size preserves valuable bench space while offering multiple tool positions in a single block, enabling shorter tool-change distances and a neater layout. The lightweight construction supports flexible placement and straightforward repositioning when workflows change. Suitable applications and workshop integration The product is tailored to production and maintenance environments that use HSK63 toolholders, such as CNC workshops, precision maintenance stations and assembly benches. Its polypropylene construction is particularly advantageous where resistance to lubricants and cleaning agents is required. The table block's layout supports orderly tool storage and clear tool identification, aiding setup consistency and lowering the likelihood of handling errors during shift changes or batch operations. For enquiries about suitability, compatibility or delivery of this TECWERK HSK63 storage solution, contact Metav Werkzeuge for expert advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 9000453683NW Manufacturer: TECWERK Product type: Tool holder Dimensions & weight Width: 360 mm Depth: 245 mm Height: 150 mm Weight: 360 g Features & materials Shank type: HSK63 Table block for 15 tool positions Material: Polypropylene Colour: black Acid- and coolant-resistant Impact- and break-resistant FAQ What shank type is this storage block designed for? The storage block is designed for HSK63 shank tool fittings and positions compatible HSK63 holders securely. Is the block resistant to cutting fluids and cleaning agents? Yes, the polypropylene construction is acid- and coolant-resistant, making the block suitable for environments where exposure to lubricants and coolants occurs. How portable is the table block for repositioning at the workbench? At around 360 g, the block is lightweight and easy to move, allowing flexible placement near machines or on benches as workflow requires. Can the block withstand everyday workshop impacts? The unit is specified as impact- and shatter-resistant, providing robust performance under normal handling and reducing the risk of damage. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm SK40 Tool Holder For Assembly System, Compatible With DIN 69871/JIS B/DIN 2080 - TECWERK
Take advantage of a standards-based interface and trouble-free integration for consistent production results; the combination of a true SK40 taper, conformity to DIN 69871 / JIS B / DIN 2080, and a compact single-piece design supports reliable toolholding and efficient setup. Order the adapter directly via Metav Werkzeuge or consult the team for application advice. SK40 Mounting Adapter (Holder for Montagesystem) — SK40 taper, TECWERK compatibility SK40 Mounting Adapter for mounting-system use; provides a standardised toolholder interface for machine and workshop installations. SK40 taper according to DIN 69871 / JIS B / DIN 2080 Compatible with Montagesystem Art.-Nr. 2000832115 Precision interface for reliable toolholding Single-piece design for straightforward mounting Engineered for dependable, low run-out toolholding The adapter uses the SK40 taper standard to create a repeatable, concentric connection between spindle and tooling. Conformity with DIN 69871, JIS B and DIN 2080 means the interface matches common international tooling systems, reducing adaptation time and enabling predictable machining results. The standardised taper reduces radial run-out and vibration risk, which leads to improved surface finish and longer tool life — a clear efficiency gain for production and maintenance processes. Fast integration with existing TECWERK mounting systems Designed specifically for the TECWERK mounting environment, the interface is marked as compatible with the Montagesystem Art.-Nr. 2000 832 115, facilitating direct replacement or upgrade without redesign. The precision interface and compact construction support quick installation on existing fixtures and jigs, minimising machine downtime. For workshops seeking straightforward retrofits, the adapter’s adherence to established standards simplifies procurement and inventory management by enabling cross-compatibility with other SK40 tooling. Stability and workshop supply confidence for continuous operation A robust, single-piece construction delivers mechanical stability under typical workshop loads while keeping the mounting routine uncomplicated. Combined with Metav’s role as a precision partner — offering broad product range and dependable logistics from Emmerich — buyers gain both product quality and supply-chain reliability. The adapter’s standards compliance and design focus help secure process stability, so production planners can prioritise throughput and repeatability with confidence. Contact Metav Werkzeuge for tailored integration advice and secure the TECWERK SK40 adapter for swift incorporation into the mounting system. Technical data Article number: 2000832116NW Label: Aufnahme SK40 (DIN 69871, JIS B, DIN 2080) z.Montagesystem TECWERK Manufacturer: TECWERK Facts SKU / UID: 2000832116NW Packaging unit: 1 Special features Taper: SK40 (DIN 69871, JIS B, DIN 2080) Compatible with Montagesystem Art.-Nr. 2000 832 115 Product type: Holder for mounting system Enrichment note: for Montagesystem Art.-Nr. 2000 832 115 FAQ What taper standards does the adapter follow? The adapter follows the SK40 taper standard and is specified to DIN 69871, JIS B and DIN 2080 for interchangeability. Is this adapter compatible with the TECWERK mounting system? Yes — the product is described as compatible with the Montagesystem referenced as Art.-Nr. 2000 832 115 and intended for use in that mounting environment. What is the item number for ordering or reference? The SKU for the TECWERK mounting adapter is 2000832116NW and can be used for ordering and inventory tracking. Is the material specified for the adapter? The supplied product data does not include a material specification for this adapter. How many units are supplied per package? The packaging unit indicated in the product data is 1. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Swivel Assembly System Quick-Change Aluminium Housing, Indexable 4x90° - TECWERK
Combining the swivel indexing and interchangeable steel tool holders with an aluminium housing delivers a compact, robust mounting solution that enables safe, seconds-fast tool changes and minimal footprint; order the TECWERK mounting system directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Swivel Base Mounting System – Base Unit with Indexing The TECWERK swivel base mounting system is a compact clamping solution for secure and rapid exchange of tool holders in workshop and assembly environments. Swivel base with 4 x 90° indexing Aluminium housing, low space requirement Interchangeable steel tool holders Seconds-fast, secure tool change Speed up changeovers and keep production moving The swivel base is designed for fast tool changeovers, providing indexable positions that cut changeover time and reduce machine downtime. The unit’s indexable 4 x 90° arrangement offers repeatable, clearly defined tool positions, which simplifies process planning and minimises setup errors. With a form-fit fixing system, the mounting frame ensures that tools are held securely during operation, supporting consistent cycle times and reliable part quality. The overall result is a measurable improvement in operational throughput and predictable production flow. Robust, compact construction for confined workspaces A lightweight aluminium housing combines corrosion resistance with stiffness, allowing the unit to be installed where space is limited without compromising rigidity. The compact footprint makes the mounting frame suitable for dense tooling stations and multi-spindle arrangements. The construction reduces the need for additional clearance and enables closer placement of fixtures, supporting more efficient use of floor and workbench space while maintaining the structural properties required for accurate positioning. Preserve tool integrity and ensure repeatable accuracy The mounting system features interchangeable steel tool holders and a form-fit fixation that prevents slippage and avoids damage to the spindle taper. By eliminating direct cone abrasion, the design extends the service life of both tools and machine interfaces, lowering maintenance frequency and cost. The positive-lock clamping principle supplies consistent concentricity and repeatability, which is essential for applications where tool runout and positioning precision affect part tolerances. Ergonomic handling for faster, safer workflows Ergonomics are built into the device to reduce operator effort during tool changes, requiring lower handling force and enabling safe, efficient swaps in seconds. The pivoting base allows simple access to each indexed position, while the quick-release concept lowers the physical strain associated with repetitive changes. These features support higher uptime and a better working environment, helping teams to maintain pace without sacrificing safety or introducing handling-related errors. Choose the TECWERK swivel base unit for compact, reliable tool changes and contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data Article number: 2000832115NW Manufacturer: TECWERK Product type: Mounting system – base unit (swivel) Facts Indexing positions: 4 x 90° Packaging unit: 1 Special features Aluminium housing Interchangeable steel tool holders Swivelable and indexable Form-fit fixation of tools No spindle taper damage Low space requirement Reduced handling force through ergonomic design Tool change in seconds FAQ How is the indexing arranged and how many positions are available? The unit offers an indexable arrangement with four positions at 90° increments, enabling clear, repeatable tool locations for the TECWERK swivel base mounting system (SKU 2000832115NW). Can the system prevent damage to the machine taper? Yes, the mounting solution uses a form-fit fixation that avoids cone abrasion, so the design protects the spindle taper and prolongs interface life. What materials are used for the housing and tool holders? The base features an aluminium housing for a compact, rigid assembly, while the tool holders are supplied as interchangeable steel components for durability and precision. Is the mounting system suitable for small workshops with limited space? The compact design and low footprint make the unit suitable for confined work areas where space efficiency is required without loss of functionality. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Tool Holder SK50 Compact 6-Unit Impact-Resistant Polypropylene, Black - TECWERK
Take advantage of a compact, SK50-compatible storage system that combines impact‑resistant polypropylene construction with chemical resilience and space-saving dimensions for streamlined tool handling; order directly via Metav Werkzeuge or request consultancy for system integration. Tool holder SK50 — compact 6‑slot polypropylene tray by TECWERK The Tool holder SK50 organises SK50 taper tool shanks in a compact, chemical‑resistant polypropylene tray designed for workshop and CNC storage. Compact 6‑slot design for SK50 tapers Polypropylene, impact and break resistant Acid and coolant resistant material Space‑saving dimensions 390×260×150 mm Organised storage that speeds up changeovers A well-ordered tooling area reduces machine downtime and accelerates set‑up procedures. The compact tray provides six dedicated positions for SK50 tapers, enabling quick visual checks and immediate access to the required shank. By keeping holders secured in a single, marked tray, the risk of damage during staging is reduced and tool change routines become more predictable, which supports higher workshop throughput and more efficient shift planning. Robust polypropylene construction for harsh shop environments Made from polypropylene, the tray resists impacts and breakage while maintaining shape under frequent handling. The material’s acid and coolant resistance prevents degradation in environments where lubricants and machining fluids are present. For workshops requiring a low‑maintenance storage solution, this robustness translates into a longer service life and fewer replacements, lowering total cost of ownership through reliable, uninterrupted use. Clear compatibility and practical dimensions for integration With external dimensions of 390×260×150 mm, the tray fits standard tool cupboards and workbench shelves without occupying excess space. The dedicated interface for SK50 taper shanks ensures secure seating and minimal lateral movement, protecting precision alignment during storage. The low weight of approximately 0.55 kg makes handling and repositioning straightforward while preserving stability when loaded with holders. Practical benefits for production and workshop management Beyond storage, the tray supports orderly logistics: centralised tool staging, easier inventory checks, and simplified transport between storage and machines. The compact design allows multiple trays to be stacked or lined up, creating modular storage arrays. Backed by Metav’s focus on accessible precision and a European quality‑filter located in Emmerich, this solution fits both independent workshops and production lines seeking dependable, easy‑to‑implement tooling organisation. For a tailored recommendation or to procure this TECWERK SK50 tool holder directly from Metav Werkzeuge’s Emmerich warehouse, contact our consultants for practical advice and delivery options Technical data Article number: 9000453682NW Manufacturer: TECWERK Product type: Werkzeugträger Facts Width: 390 mm Depth: 260 mm Height: 150 mm Weight: 0.55 kg Packaging unit: 1 Special features Material: polypropylene Colour: black Design: compact 6‑slot Tool interface: SK50 taper Properties: impact and break resistant Chemical resistance: acid and coolant resistant FAQ Is this tray compatible with all SK50 toolholders? The tray accepts SK50 taper shanks; compatibility depends on holder diameter and flange design, but it is designed specifically for standard SK50 interfaces and typical holder profiles. How durable is the polypropylene in a coolant‑exposed environment? Polypropylene used in this tray is acid and coolant resistant, so the material withstands common machining fluids and daily workshop exposure without rapid degradation. Can multiple trays be stacked or stored together? The compact dimensions and low weight allow modular arrangement; trays can be placed side by side or stacked where shelving accommodates the combined height. What are the transport and handling advantages of the tray? At approximately 0.55 kg, the tray is easy to handle when staging tools between storage and machine, and the individual slots secure shanks to reduce handling damage. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
155mm x 97mm x 180mm Assembly Block SK50 Aluminium For Safe Tool Mounting, Securing Screw - TECWERK
Take advantage of a compact, aluminium mounting solution that enables safe assembly and disassembly of steep‑taper tool holders in both horizontal and vertical positions; the built‑in safety screw and bench‑mountable design support fast changeovers and reliable workshop handling. Order the unit directly via Metav Werkzeuge or consult our experts for application advice. Mounting Block SK50 TECWERK — Aluminium mount for SK50 tool holders, bench‑mountable The Mounting Block SK50 TECWERK is a workshop fixture designed for secure and effortless assembly and disassembly of tool holders with a steep taper, suitable for use in both horizontal and vertical orientations. Aluminium construction for low weight and durability Secure fitting for SK50 steep-taper tool holders Suitable for horizontal and vertical mounting Bench-mountable with safety screw to prevent fall-out Secure handling for steep‑taper tool holders with reduced downtime The fixture delivers a practical solution for handling steep‑taper (SK) tool holders: by providing a stable support for insertion and removal, the device reduces the risk of accidental drops and misalignment during tool change procedures. The design focuses on dependable clamping of the taper interface; this ensures consistent seating and quick, repeatable operations, which directly shortens machine downtime and streamlines workshop workflows. The combination of a dedicated taper interface and a retention mechanism translates into safer, quicker tool changes and improved process reliability. Durable aluminium construction that stays reliable in daily use Manufactured from aluminium, the block balances lightweight handling with the rigidity required for workshop environments. The material choice reduces lifting effort when positioning the fixture on the bench, while offering good resistance to corrosion and wear typical of metalworking settings. The robust body resists deformation under normal use, preserving accurate alignment over repeated cycles. This longevity lowers the need for frequent replacement, supporting a cost‑effective workshop routine without compromising on operational stability. Flexible mounting orientation and a safety‑first retention concept Designed for both horizontal and vertical use, the mount allows versatile positioning to match the workflow of assembly benches or tooling stations. The integrated safety screw secures the tool holder during horizontal operations, preventing inadvertent fall‑out and improving operator safety. Its bench‑mountable configuration ensures a stable working base, enabling controlled insertion and removal even under constrained conditions. These features combine to reduce the chance of damage to tool holders and to the workbench, while making changeovers more predictable and controlled. Exact dimensions for consistent positioning and compatibility The block’s measured footprint of 97 x 155 x 180 mm supports a compact but stable platform for tool handling; the specified height of 155 mm provides a practical working elevation for most bench setups. The fixture is purpose‑matched to accept SK50 taper interfaces and is tailored to the spatial demands of steep‑taper tool holders. Clear dimensional data allows planners to incorporate the mount into existing tooling stations or fixturing systems without guesswork, ensuring predictable positioning and straightforward integration into workshop routines. For reliable, bench‑ready handling of SK50 tool holders, contact Metav Werkzeuge for technical guidance and to secure supply through their European distribution. Technical Data Article number: 2000832878NW Product: Mounting block Taper interface: SK50 Packing unit: 1 Facts Dimensions: 97 x 155 x 180 mm Height: 155 mm Width: 97 mm Length: 180 mm Special features Material: Aluminium For secure assembly and disassembly of steep‑taper tool holders Suitable for horizontal and vertical mounting Stable and trouble‑free bench mounting Safety screw to secure tool holder against fall‑out during horizontal use FAQ Which taper sizes does the mount accept? The mount is specified for the SK50 taper interface and is designed to accommodate SK50 steep‑taper tool holders. Is the fixture suitable for both horizontal and vertical tool change operations? Yes; the unit supports both horizontal and vertical mounting and includes a safety screw to prevent the tool holder from falling out during horizontal use. What material is the block made from and what are the benefits? The block is made from aluminium, offering a lightweight yet rigid support that resists corrosion and reduces handling effort in everyday workshop tasks. How does the safety screw improve operational safety? The safety screw secures the tool holder in the mount during horizontal operations, preventing accidental disengagement and reducing the risk of damage to tooling or injury. Can the mounting block be fixed to a workbench? The design allows stable bench mounting for reliable positioning during assembly and disassembly procedures. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
160mm Machine Foot Size 3 Zinc Plated M20 x 1.5 x 170, 59mm Height - TECWERK
Robust galvanised levelling support with a Ø 160 mm base and an M20 x 1.5 x 170 mm threaded bolt for secure machine placement; suitable for static loads from 800–2,500 kg and designed to isolate vibrations both from the machine and from outside sources. Order the Maschinenschuh Size 3 ALBRECHT directly via Metav Werkzeuge or consult our specialists for application guidance. Maschinenschuh Size 3 ALBRECHT — galvanised levelling foot, Ø 160 mm, M20 thread (TECWERK) The Maschinenschuh Size 3 ALBRECHT is a galvanised levelling foot engineered to give lathes, milling machines, saws and similar equipment a secure, vibration-isolating base suitable for heavy industrial use Galvanised finish for corrosion resistance Ø 160 mm base for stable support M20 x 1.5 x 170 mm threaded bolt Rated for 800–2,500 kg static load Stable support for heavy machinery and safer workflows A levelling foot with a Ø 160 mm base and a robust threaded stud provides a wide contact area that improves load distribution and reduces surface pressure. The M20 x 1.5 x 170 mm bolt enables precise height adjustment while the built-in levelling plate maintains stability under heavy loads. For workshops that demand repeatable positioning and a reliable foundation, this design reduces the risk of uneven settling and contributes to safer, more consistent machining outcomes. Effective vibration isolation for improved accuracy By isolating vibrations both from the machine to its surroundings and from external sources into the machine, this mount aids in preserving the accuracy of precision equipment. The combination of the wide base and a levelling compensation of 25 mm dampens transmission of oscillations so that spindles and tools remain steadier during operation. The result is fewer rejects, reduced tool wear and a quieter working environment — advantages that translate into measurable gains in production quality and operator comfort. Choosing the right levelling foot for an application Selection is based on the machine’s total weight and the number of fixing points: divide the machine weight by the number of mounting holes to determine the required capacity per foot. The Size 3 model covers a max static load per foot of 800–2,500 kg, which suits many medium‑ to heavy‑duty machines. Where uncertain, refer to the machine’s specification plate and compare the calculated load per fixing point against the rated capacity of the mount to ensure a safe margin of use. Durable finish and straightforward installation The galvanised finish provides long-term corrosion resistance for workshop environments, while the threaded stud and levelling plate simplify installation on machine bases or frames. Fixing requires standard fastening practices and basic tools; final levelling is achieved via the stud adjustment. The construction supports reliable operation over time with minimal maintenance, which helps to keep machine downtime and service interventions to a minimum. For product availability, application advice or to place an order for the TECWERK levelling foot, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and quick supply. Technical Data Article number: 4000832074NW Product: Maschinenschuh Size 3 ALBRECHT Manufacturer: TECWERK Facts Height including levelling plate H: 59 mm Base diameter Ø D: 160 mm Threaded bolt G: M20 x 1.5 x 170 mm Levelling compensation N: 25 mm Max static load per foot: 800–2,500 kg Special features Galvanised finish Suitable for lathes, milling machines, saws and similar machinery Reduces vibration transmission in both directions Packaging unit: 1 FAQ What static load can a single levelling foot carry? A single Maschinenschuh Size 3 ALBRECHT is rated for a max static load of 800–2,500 kg, depending on installation and safety factors; calculate the load per fixing point to confirm suitability. Is the levelling foot suitable for precision machines? Yes. The galvanised levelling foot is designed to isolate vibrations and provide a stable base, helping to preserve the accuracy of precision equipment when used correctly. How much vertical adjustment is available? The levelling arrangement provides 25 mm of levelling compensation, with a total height including the levelling plate of 59 mm, enabling fine height adjustments during set-up. Which machines are compatible with this mount? The mount is appropriate for lathes, milling machines, saws and other industrial machines where a secure, vibration-isolating support is required. What does the threaded specification M20 x 1.5 x 170 mm mean for installation? The designation indicates an M20 metric thread with a 1.5 mm pitch and a 170 mm stud length; this determines the fixing method and the depth required for secure mounting of the foot. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Clamping Screw M12 for 12/14mm Collet Chuck, Cylinder Shaft Clamping - TECWERK
Take advantage of the M12 thread, compact L 16 mm length and compatibility with 12/14 mm chucks for consistent, secure clamping in production settings; order direct via Metav Werkzeuge or consult the technical team for application guidance. Clamping screw M12 L16 mm for chuck Ø12/14 mm (TECWERK) — precision clamping fastener for face-type chucks The Clamping screw M12 L16 mm for chuck Ø12/14 mm (TECWERK) is a purpose-built clamping fastener for face-type chucks, intended to secure tools with a cylindrical shank and a lateral drive flat in accordance with DIN 1835-B. M12 thread for secure clamping Compatible with chuck Ø 12/14 mm Length L 16 mm for compact installations Suited to DIN 1835-B tool shanks Secure retention that improves machining reliability The Clamping screw M12 L16 mm for chuck Ø12/14 mm (TECWERK) combines a standard M12 thread with a compact geometry to deliver secure retention of rotating tools. A positive clamping fit reduces micro-movement between tool and chuck, which helps to maintain concentricity and therefore improves machining accuracy. For production environments where repeatability matters, this specification supports stable cutting conditions and reduced scrap rates. Compact form factor for tight setups and retrofits With a nominal length of L 16 mm, the fastener is designed for installations where projection and clearance are limited. The short overall length minimises overhang, which contributes to better dynamic behaviour during machining and easier balancing of assemblies. This compact design is beneficial for retrofitting existing spindle or chuck configurations where space is at a premium, enabling reliable clamping without extensive rework. Conforms to established tool shank standards for torque transfer Compatibility with tools that feature a cylindrical shank and a lateral drive flat to DIN 1835-B ensures secure torque transmission under load. The lateral flat engages with the chuck mechanism, preventing slippage and supporting repeatable tool indexing. Specifying components that match recognised standards simplifies procurement and guarantees interchangeability across common collet and chuck systems. Ready for straightforward integration and reliable supply Supplied as single units, the clamping screw suits focused replacement needs and small-batch maintenance tasks. The compact specification and standard thread make the component straightforward to add to existing spare-part inventories and facilitates predictable stock management. For workshops and production facilities seeking consistent availability, sourcing via an established distributor helps to ensure continuity of supply and documented product traceability. Contact Metav Werkzeuge for tailored advice on integrating the TECWERK clamping screw M12 L16 mm (SKU 2000834137NW); eMail info@metav-werkzeuge.com or call +49 2822 7131930 for rapid technical guidance and order support Technical data Article number: 2000834137NW Product: Clamping screw Label: Clamping screw M12 L16 mm for chuck Ø12/14 mm TECWERK Brand: TECWERK Facts Thread nominal Ø: M12 Length: 16 mm Suitable for chuck Ø D: 12/14 mm Package unit: 1 Special features For face-type chucks For clamping tools with cylindrical shank with lateral drive flat Conforms to DIN 1835-B FAQ Is this clamping screw compatible with standard 12/14 mm chucks? Yes. The component is specified for use with chucks of Ø 12/14 mm and is intended for face-type chuck assemblies as noted in the technical data (SKU 2000834137NW). Can the clamping screw be used with tools to DIN 1835-B? Yes. It is designed to clamp tools that have a cylindrical shank with a lateral drive flat according to DIN 1835-B, ensuring correct engagement and torque transfer. What are the thread size and overall length of the fastener? The fastener features an M12 thread and an overall length of 16 mm, providing a compact solution for standard clamping applications. How is the item supplied for maintenance and replacement? The product is supplied as single units (package unit 1), which suits selective replacement of worn or lost clamping screws. Is the clamping screw intended for heavy-duty machining tasks? The fastener is designed for reliable clamping in standard machining operations where compatibility with DIN 1835-B shanks is required; for high‑demand or specialised applications, component selection should align with the specific machine and process parameters. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Clamping Screw M14 For 16/18mm Collet Chuck - TECWERK
Take advantage of a compact, industry-proven fastener that combines precise thread engagement and direct compatibility with Ø 16/18 mm face clamping chucks for steady tool retention. Order supply or request consultancy directly via Metav Werkzeuge for a seamless addition to the workshop inventory. Clamping screw M14, length 16 mm — for chuck Ø 16/18 mm (TECWERK) The Clamping screw M14 L16 mm for chuck Ø 16/18 mm is a purpose-built clamping fastener for face clamping chucks, designed to secure cylindrical-shank tools with a lateral drive flat in accordance with DIN 1835-B. M14 threaded connection for secure fixation Compact 16 mm overall length for tight setups Compatible with chuck diameters Ø 16/18 mm Suited to DIN 1835-B cylindrical shank tools Reliable thread and geometry for consistent clamping results The component uses an M14 thread together with a short 16 mm overall length to deliver reliable axial preload in confined assemblies. This geometry reduces axial play and helps maintain concentricity during rotating operations, which in turn lowers the risk of vibration and tool runout. Specifying the correct fastener minimises rework and supports continuous production by ensuring repeatable clamping performance. Designed for face clamping chucks and DIN-compliant tools Compatibility with face clamping chucks and tools featuring a lateral drive flat per DIN 1835‑B ensures positive torque transfer and axial restraint for cylindrical shank tooling. The lateral drive flat prevents rotation within the chuck seating, so the fastener secures the tool reliably under load. Explaining DIN 1835‑B in practical terms: it standardises the contact geometry for safe mechanical drive between chuck and tool, reducing slippage and improving machining accuracy. Simple specification supports quick selection and inventory control The compact specification — thread M14, length 16 mm, suitable for Ø 16/18 mm chucks — simplifies procurement and inventory decisions in production and maintenance settings. The straightforward characteristic set reduces ordering errors and shortens lead times, while the single-item packaging unit facilitates stock keeping for small batches or one-off replacements. Choosing a standardised clamping fastener like this also reduces the variety of spare parts needed on the shop floor, improving overall operational efficiency. Confidence through compatibility and supply reliability Selecting a recognised fastener from an established brand supports workshop reliability and peace of mind during demanding operations. The product’s straightforward mechanical function and standard compliance make it a pragmatic choice for engineering shops and maintenance departments that value durable, predictable clamping. Combined with Metav’s role as a quality filter for European supply, procurement benefits from consistent availability and documented conformity to industry norms. Contact Metav Werkzeuge for supply and technical advice on the TECWERK clamping screw M14 L16 mm to ensure compatibility with specific chuck models and to arrange prompt delivery from stock. Technical data Article number: 2000834138NW Product: Clamping screw, fastener Brand: TECWERK Facts Thread: M14 Overall length: 16 mm Suitable for chuck Ø: 16/18 mm Special features For face clamping chucks For cylindrical-shank tools with lateral drive flat per DIN 1835‑B Packaging unit: 1 FAQ What chuck diameters is this fastener suitable for? The clamping screw is suitable for chucks with an internal diameter of Ø 16/18 mm and secures tools accordingly. Which thread and overall length are specified for this product? This TECWERK clamping screw features an M14 thread and an overall length of 16 mm (SKU 2000834138NW). Can this fastener be used with tools to DIN 1835‑B? Yes — the fastener is intended for use with cylindrical-shank tools that have a lateral drive flat as specified by DIN 1835‑B. How does the lateral drive flat affect clamping performance? The lateral drive flat provides positive drive engagement with the chuck seating, improving torque transfer and preventing rotational slippage under load. Is this component suitable for confined or compact assemblies? The short 16 mm length is optimised for compact setups where axial space is limited while still providing secure clamping. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Clamping Screw M16 for 20mm Collet Chuck, For Cylindrical Shank Tools DIN 1835-B - TECWERK
Take advantage of a compact, standardised clamping solution that combines precise thread engagement and space-saving design for efficient workshop setups; order directly via Metav Werkzeuge or ask the consultants for tailored advice. TECWERK Clamping Screw M16, L 16 mm for Ø 20 mm Chucks The Clamping screw M16 L 16 mm for Ø 20 mm chucks is a compact clamping component for flat-jaw chucks, engineered to secure tools with cylindrical shanks and lateral drive according to DIN 1835‑B. For flat-jaw chucks with Ø 20 mm Thread nominal diameter M16 Short overall length L 16 mm Compatible with DIN 1835‑B shank tools Precision hold for repeatable machining results A compact clamping screw with a defined M16 thread provides a reliable mechanical connection between chuck and tool, reducing runout and improving repeatability. The compatibility with a Ø 20 mm chuck ensures standardised seating, which is particularly valuable for series production and frequent tool changes. Because the component is designed for tools with a cylindrical shank and a lateral drive in accordance with DIN 1835‑B, the user benefits from predictable torque transmission and secure axial retention—both essential for maintaining consistent part quality across batches. Space-saving design that simplifies setups With an overall length of L 16 mm, this clamping bolt suits assemblies where installation space is limited. The short profile minimises tool overhang and helps keep the centre of gravity close to the spindle, which lowers vibration and supports higher precision at the cutting edge. For workshops and production cells that prioritise compact tooling and quick changeover, the reduced length translates directly into faster set-ups and fewer collisions, enhancing operational efficiency without compromising secure clamping. Clear conformity and practical workshop benefits Adherence to the lateral-drive specification of DIN 1835‑B means the component integrates with a wide range of modern toolholders and collets, simplifying procurement and inventory management. Supplied as single units, the part is useful for targeted replacements or gradual fleet standardisation. The straightforward geometry and standard thread allow technicians to assess compatibility at a glance, reducing downtime during maintenance and contributing to steady throughput in day-to-day machining operations. For secure, space-efficient clamping with TECWERK quality, contact Metav Werkzeuge for product advice or to arrange supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000834139NW Label: Spannschraube M16 L.16mm f.Spannfutter-D.20mm TECWERK Manufacturer: TECWERK Packaging unit: 1 Core data Thread: M16 Overall length: 16 mm Suitable for chuck Ø: 20 mm Special features For flat-jaw chucks For cylindrical shank tools with lateral drive (DIN 1835‑B) Short overall length for compact setups FAQ What chuck size is this clamping screw compatible with? The clamping screw is specified for use with chucks of Ø 20 mm, ensuring standard compatibility for many flat-jaw chuck systems. Which thread and length does the part use? This component features an M16 thread and an overall length of 16 mm, as indicated on the product label (SKU 2000834139NW). Can this be used with tools that follow DIN 1835‑B? Yes, the design is suitable for tools with cylindrical shanks and lateral drive in accordance with DIN 1835‑B, providing secure drive engagement. Is the clamping screw suitable for compact installations? The short profile (L 16 mm) is intended for installations with limited axial space, helping to reduce tool overhang and potential interference. How is the item supplied in terms of packaging? The part is supplied as a single unit (packaging unit 1), suitable for replacement or incremental fleet update. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
16mm Pull Screw M8 for 16mm Clamping Diameter, DIN 6367 - TECWERK
Compact, standardised and reliable: the combination of an M8 thread, 20 mm head diameter and a 16 mm overall length ensures secure seating and compact assemblies for milling operations. Order the milling clamping screw directly via Metav Werkzeuge or request compatibility advice from our consultants. Milling clamping screw M8 for 16 mm clamping diameter – TECWERK (20 mm head, 16 mm length) The Milling clamping screw M8 for 16 mm clamping diameter is a standardised fastening element for securing cutters and adaptors in compact toolholders where repeatable concentricity and easy interchangeability are required M8 thread, compatible with standard collets Conforms to DIN 6367 for interchangeability Designed for clamping Ø 16 mm 20 mm head diameter, 16 mm overall length Consistent clamping for uninterrupted production The primary advantage of this clamping screw is its consistent mechanical interface: the M8 thread and adherence to DIN 6367 reduce setup time and minimise the risk of misfit between toolholders and cutters. This leads to fewer stoppages for re-tensioning and less variation in runout, supporting a smoother production flow. The component’s standardised geometry supports rapid replacement and compatible retrofit with many commercial toolholder systems, delivering a measurable improvement in operational efficiency. Compact dimensions that suit confined toolholders With an overall length L: 16 mm, head diameter D: 20 mm and head height K: 6 mm, this clamping screw is engineered for installations where space is limited. The compact proportions allow reliable force transmission without introducing protrusion that interferes with adjacent tooling. Explaining the key dimensions: L denotes the total length, D the head diameter and K the head height – each value informs the clearance and engagement depth required in the toolholder, making selection straightforward even for non-specialist workshop staff. Practical compatibility and workshop guidance Specified for a clamping Ø 16 mm, this fastening element is suited to common milling applications where a small, repeatable locating diameter is needed. Delivered in a single-piece packaging unit, it is intended for direct installation or as a stocked spare. The part is supplied under the TECWERK designation, which simplifies procurement and traceability in maintenance records. If further verification of fit is required, Metav Werkzeuge provides technical guidance and can confirm suitability against specific toolholder models. Request tailored advice from Metav Werkzeuge for TECWERK clamping components or arrange procurement and delivery from our Emmerich hub via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000834072NW Label: Milling clamping screw M8 for 16 mm clamping diameter TECWERK Product type: Fräsanzugsschraube (milling clamping screw) Dimensions / Core data Thread: M8 Head diameter (D): 20 mm Overall length (L): 16 mm Head height (K): 6 mm Suitable for clamping Ø: 16 mm Special features / Versions Conforms to DIN 6367 Packaging unit: 1 Brand: TECWERK UID: 2000834072NW FAQ Is this clamping screw compatible with my M8 toolholder? Compatibility depends on the toolholder’s conformity to standard DIN interfaces; the Milling clamping screw M8 for 16 mm clamping diameter follows DIN 6367, which supports interchangeability with compliant holders. What do the dimension codes L, D and K mean? L refers to the overall length (16 mm), D to the head diameter (20 mm) and K to the head height (6 mm); these values determine engagement depth and clearance in the toolholder. Can the screw be used for heavy-duty milling operations? The component is designed for secure clamping where the specified interface and dimensions match the application; refer to the toolholder manufacturer’s load limits to assess suitability with the Milling clamping screw M8. How is the product supplied and tracked? The item is supplied as a single piece (packaging unit 1) and identified by article number 2000834072NW for stock and maintenance tracking. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
180mm Milling Arbour Key DIN 6368 For Arbour Ø16mm, Hardened Steel - TECWERK
The combination of DIN 6368 conformity, a hardened special steel construction and a 180 mm overall length ensures secure tightening of cutter clamping screws and reliable leverage in workshop use; order the tool directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Milling Arbor Key DIN 6368 – 16 mm Arbor, 180 mm (TECWERK) The Milling Arbor Key DIN 6368 is a hardened workshop tool designed for tightening and loosening cutter clamping screws on 16 mm arbors in milling setups. DIN 6368 compliant tool Suitable for 16 mm arbor 180 mm overall length for leverage Hardened special steel, blued finish Consistent clamping force for repeatable machining quality The tool is engineered to deliver a predictable torque transfer when working with cutter clamping screws, supporting consistent tool retention and repeatable results. Conformity with DIN 6368 provides a verifiable standard for dimensions and fit, while the specification for use with a 16 mm arbor reduces uncertainty during tool selection. This focus on measurable compatibility minimises set-up time and supports a smoother production flow, particularly in frequent-change operations where reliability of clamping is essential. Robust construction to withstand routine workshop stress Manufactured from hardened special steel and supplied with a blued finish, the key resists wear and presents a corrosion-resistant surface treatment suitable for a busy workshop environment. The material choice and heat treatment ensure edge and profile stability at the contact points, which preserves fit and function over prolonged use. The blued surface aids in visual inspection of wear and reduces the need for early replacement, contributing to lower lifetime costs and dependable service intervals. Practical length and ergonomics to improve handling efficiency With a total length of 180 mm, the wrench provides additional leverage for secure engagement with cutter clamping screws while remaining compact enough for work at the machine. The geometry supports controlled torque application without excessive force, reducing the likelihood of over-tightening. Designed primarily for tightening and loosening, the tool complements standard milling setups and helps maintain cycle times by enabling quick, dependable adjustments at the spindle or arbor. Discuss the suitability of this TECWERK milling arbor key with Metav Werkzeuge to confirm fitment for existing setups and arrange delivery from Emmerich. Technical data Article number: 4000832438NW Norm: DIN 6368 Product type: Milling arbor key Suitable for: Dorn-Ø 16 mm Facts Overall length: 180 mm Packaging unit: 1 Special features For tightening and loosening cutter clamping screws Designed for use with equipment to DIN 6367 Special steel, hardened and blued finish FAQ What arbor diameter does the key fit? The key is designed for a 16 mm arbor and is specified accordingly in the product data for precise compatibility. Is the tool compliant with a recognised standard? Yes, the tool is produced to DIN 6368, ensuring dimensional conformity and interchangeability in standard milling applications. What material and finish are used for durability? The milling arbor key is made from hardened special steel with a blued finish, providing wear resistance and basic corrosion protection suitable for workshop use. Can this key be used to both loosen and tighten clamping screws? The tool is intended for both tightening and loosening of cutter clamping screws and is dimensioned to work reliably at the specified 16 mm arbor interface. Which SKU identifies this product for ordering? Refer to SKU 4000832438NW when ordering the TECWERK milling arbor key or when requesting technical clarification. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
200mm Milling Arbor Key DIN 6368 For Arbor Ø22mm, Hardened Special Steel - TECWERK
Combining DIN 6368 conformity with a hardened special steel construction and a 200 mm overall length, this tool delivers reliable access and secure torque for arbor Ø 22 mm applications; ideal for tightening and loosening milling arbor draw-in screws. Order the milling arbor key directly via Metav Werkzeuge or ask our consultants if needed. Milling arbor key DIN 6368 — TECWERK, arbor Ø 22 mm, 200 mm length A milling arbor key DIN 6368 designed for tightening and loosening milling arbor draw-in screws, suited to use with an arbor Ø 22 mm in workshop and production environments. DIN 6368 standard conformity For arbor Ø 22 mm Hardened special steel, tempered finish 200 mm total length for added leverage Precision that matches industry standards The tool is manufactured to DIN 6368, which ensures a precise fit to the clamping interfaces encountered in milling setups. Conformity with this standard reduces the risk of incorrect engagement and slippage, translating into shorter setup times and fewer tool changes. By focussing on measurable compatibility, the design supports repeatable results when working with draw-in screw systems specified to the same norm. Robust construction for consistent torque transfer Constructed from special steel, the key is hardened and tempered to a brown finish, offering a balance of toughness and wear resistance. The treated surface helps the tool withstand repeated use in a busy workshop without rapid loss of function. With a 200 mm overall length the tool provides practical leverage for controlled tightening and loosening of clamping screws while remaining compact enough for confined spindle housings. Designed to simplify workshop routines The geometry of the arbor wrench is optimised for access to milling arbor draw-in screws and related fastening hardware. This focused design reduces handling time and supports efficient machine changeovers, which is important for batch production and maintenance cycles. If compatibility with specific draw-in systems is a concern, technical details in the product data help to confirm fit before purchase. Applications and suitability Intended for use with an arbor of Ø 22 mm, the key is a specialist workshop instrument for milling toolholders and arbors where secure seating of cutters is required. The tool is appropriate for general workshop and industrial environments where standardised clamping elements are in use and where a durable, standard-compliant wrench improves repeatability and safety. For precision work with TECWERK components, request further technical details or secure supply through Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for fast delivery from Emmerich. Technical data Article number: 4000832439NW SKU: 4000832439NW Product type: Milling arbor key Manufacturer: TECWERK Norm: DIN 6368 Total length: 200 mm Suitable for arbor Ø 22 mm Packaging unit: 1 For tightening and loosening milling arbor draw-in screws Conforms to DIN 6367 where relevant for screw interface Special steel, hardened and tempered to a brown finish FAQ What arbor size is this key suitable for? This milling arbor key is designed for an arbor Ø 22 mm and engages draw-in screw systems specified for that arbor diameter. Which standard does the tool conform to? The tool conforms to DIN 6368, ensuring dimensional compatibility with components and clamping screws produced to the same standard. What is the overall length of the tool? The overall length is 200 mm, providing practical leverage for tightening and loosening clamping screws in workshop and production settings. What material and finish does the key have? The key is made from special steel, hardened and tempered to a brown finish to improve wear resistance and longevity under regular use. Can the key be used with other arbor systems? Compatibility depends on the clamping interface; the key is optimised for systems aligning with DIN 6368 and an arbor Ø 22 mm—verify dimensional match before use. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
200mm Tool Holder SK40 Table Block 12-Slot, Polypropylene Black - TECWERK
Take advantage of a durable, polypropylene construction combined with SK40 compatibility for orderly tool storage and faster changeovers; order directly via Metav Werkzeuge or consult the team for application advice. Tool holder SK40 — 12-way polypropylene desk block, 360×245×200 mm (TECWERK) A Tool holder SK40 built to organise SK40 toolholders at the workshop bench, offering robust protection and resistance where coolants and mild acids are present. SK40-compatible holders organised safely Polypropylene, shock- and break-resistant Acid- and coolant-resistant construction Space-saving 360×245 mm bench footprint Reduce downtime with organised SK40 tool storage The compact bench block is designed to speed up tool changes by keeping all SK40 holders immediately accessible and visible. By avoiding misplaced holders and unnecessary searches, the system contributes to measurable efficiency gains during production runs. The 360×245×200 mm footprint combines a small workplace presence with orderly storage, making tool retrieval quicker and reducing cycle interruptions in mixed-production environments. Work reliably in wet or chemically exposed areas Constructed from polypropylene, the block resists shock and breakage and stands up to routine exposure to coolants and many workshop acids. This material choice ensures long-term dimensional stability and makes routine cleaning straightforward, so hygiene and maintenance cycles are shortened. The acid- and coolant-resistant properties protect both the block and the mounted holders, preserving tool integrity and minimising corrosion-related downtime. Compact, lightweight design that supports flexible workshop layouts At approximately 0.48 kg, the block is light enough to reposition while remaining stable on the bench. The shallow footprint permits placement close to machining centres, enabling ergonomic tool changes and optimised work flow without sacrificing bench space. The design supports tidy workflows, freeing up room for clamping or inspection tools and contributing to an organised, safe workspace. Simple upkeep and broad suitability across workshops The bench block accepts standard SK40 toolholders and requires no special maintenance beyond periodic cleaning; its shock-resistant design reduces the likelihood of damage from incidental knocks. The robust, hygienic material suits a range of industrial environments from light engineering to maintenance bays, offering consistent protection for expensive holders and helping to maintain tool life and cutting-edge performance. Choose the TECWERK SK40 bench block for reliable, space-efficient tool organisation and contact Metav Werkzeuge for tailored advice or rapid dispatch from Emmerich. Technical data Article number: 9000453681NW Type: Tool holder Brand: TECWERK Facts Width: 360 mm Depth: 245 mm Height: 200 mm Weight: 0.48 kg SKU / UID: 9000453681NW Special features Material: Polypropylene Colour: black Execution: Desk block, 12-way Mounting: for SK40 toolholders Resistance: acid- and coolant-resistant Mechanical: shock- and break-resistant FAQ Which toolholders fit this bench block? The bench block accepts standard SK40 toolholders; the design secures each holder in an organised layout suitable for machining environments. Is the block suitable near coolant systems? Yes, the polypropylene construction is acid- and coolant-resistant, making the bench block appropriate for use in wet machining zones. How should the block be cleaned and maintained? Cleaning requires only routine wiping with compatible detergents; the material resists common workshop fluids and is designed for low-maintenance operation. Can the bench block be relocated between workstations? The lightweight design (approx. 0.48 kg) allows easy repositioning on the workbench to support changing workflow demands. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Clamping Screw M18x2 For 25mm Collet Chuck, Length 20mm - TECWERK
Reliable compatibility with 25 mm collet chucks, combined with a standard M18 x 2 thread and compact 20 mm length, ensures consistent tool retention and easy interchange in clamping systems. Order the clamping screw directly via Metav Werkzeuge or consult our advisers for application support. Clamping screw M18 x 2 L 20 mm for 25 mm collet chuck — TECWERK A Clamping screw M18 x 2 L 20 mm designed for use with Ø 25 mm collet chucks, suitable for clamping tools with cylindrical shanks featuring a lateral drive surface to DIN 1835-B. M18 x 2 thread for standardised fit Compact 20 mm overall length Compatible with Ø 25 mm collet chucks Conforms to DIN 1835-B drive geometry Precise interfacing with standard collet systems The clamping screw provides a standardised M18 x 2 connection and a short, defined 20 mm overall length that supports reproducible seating in collet-based holders. By matching the nominal thread and the specified dimensions, the component minimises axial play and ensures repeatable positioning when used with Ø 25 mm collet chucks. This leads to reliable concentricity during spindle rotation and reduces the need for frequent re-centring, which is particularly valuable in batch production and high-precision workshop settings. Secure torque transfer and reliable tool retention Designed for tools with a cylindrical shank and a lateral drive surface to DIN 1835-B, the screw facilitates positive torque transmission between chuck and tool; the lateral drive surface prevents slippage under cutting loads. When installed correctly in a compatible chuck, the part supports consistent clamping force and reduces the risk of tool runout. This mechanical clarity simplifies setup procedures and contributes to predictable machining outcomes, improving process stability on the shop floor. Streamlined integration and lower downtime With a compact profile and standard thread form, the component fits established clamping workflows without custom adaptation. Parts exchange is straightforward, which shortens maintenance intervals and keeps spindle idle time to a minimum — a clear efficiency advantage for production environments. Combined with Metav’s logistics and supply reliability, procurement and replenishment become a predictable part of workshop planning, supporting continuous operation and straightforward stock management. Application scope and practical considerations The screw is intended for use with face-style clamping chucks and for securing tools that comply with the DIN 1835-B shank specification; it is therefore well suited to general-purpose turning and milling tool clamping where a lateral drive surface is present. As material information is not specified in the available data, verification against the chuck manufacturer’s recommendations is advised when specific material or heat-treatment properties are required. Where interchangeability with existing tooling is a concern, refer to chuck diameter and drive-surface compatibility first to confirm fit. Contact Metav Werkzeuge for tailored technical advice and reliable supply of TECWERK clamping screws for Ø 25 mm collet chucks Technical data SKU: 2000834140NW Label: Spannschraube M18x2 L.20mm f.Spannfutter-D.25mm TECWERK Product type: Clamping screw Manufacturer: TECWERK Thread: M18 x 2 Overall length: 20 mm Suitable for: Collet chuck Ø 25 mm Packaging unit: 1 UID: 2000834140NW Facts Thread nominal diameter: M18 x 2 Length (L): 20 mm Compatible chuck diameter: 25 mm Packaging unit: 1 Special features For face clamping chucks For clamping tools with cylindrical shank and lateral drive surface to DIN 1835-B Compact design for minimal axial play FAQ Is this screw compatible with collet chucks other than 25 mm? Compatibility is determined by the chuck’s specified clamping diameter; this clamping screw is intended for use with collet chucks of Ø 25 mm and may not seat correctly in other sizes. What does DIN 1835-B mean for tool shanks? DIN 1835-B specifies a cylindrical shank with a lateral drive surface; the clamping screw and matching chuck transmit torque via that drive surface to prevent slippage during machining. Can the screw be used with any face clamping chuck? The screw is designed for face clamping chucks that accept an M18 x 2 fixing and a 25 mm clamping interface; verification against the chuck manufacturer’s specifications is recommended. How many items are supplied per packaging unit? The packaging unit is 1, so each shipment contains a single clamping screw. Is special installation tooling required? No special tooling is listed for basic installation; standard tightening procedures for screws with an M18 x 2 thread are applicable, though adherence to the chuck supplier’s assembly instructions is advised. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Clamping Screw M20x2 For 32mm Chuck, L20mm - TECWERK
Benefit from secure, repeatable clamping thanks to the M20 x 2 thread and compact 20 mm overall length, optimised for 32 mm clamping chucks. Order this clamping element directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Clamping screw M20 x 2 x 20, L 20 mm by TECWERK — for 32 mm clamping chucks The clamping screw M20 x 2 x 20 is a compact securing element designed for face chucks and for clamping tools with cylindrical shanks featuring a lateral driving surface to DIN 1835-B. M20 x 2 thread for secure clamping Length 20 mm for compact toolholders Designed for 32 mm clamping chuck Suitable for cylindrical shank tools DIN 1835-B Consistent clamping where space is limited The design delivers a compact 20 mm overall length that permits robust fastening within tight toolholder assemblies. The defined M20 x 2 thread provides reliable axial engagement, reducing play during torque transfer and supporting consistent repeatability in short-stroke clamping operations. For workshops that prioritise efficient set-up and minimal intrusion into the tool envelope, this compact clamping element helps maintain process stability and reduces rework. Broad compatibility with standard tool systems Built for use with 32 mm clamping chucks, this component is suitable where tools with cylindrical shanks and a lateral driving surface according to DIN 1835-B are employed. The geometry supports common clamping strategies in metalworking and maintenance shops, allowing integration into existing face-chuck systems without adapter modifications. Compatibility like this streamlines inventory and simplifies procurement for maintenance departments and small production cells. Durable function and straightforward integration Though compact, the clamping screw is engineered for dependable engagement under regular workshop loads. The standardised thread and dimensions enable simple replacement and interchangeability, which minimises downtime. Clear nominal values and standard interfaces mean inspection and checks can be performed with routine gauges, supporting quality assurance workflows and ensuring measurable, verifiable clamping performance across batches. Procurement confidence and technical support from Metav Metav combines a wide product range with practical purchasing support to make precision components accessible to every workshop. The availability of standardised fastening elements, paired with transparent logistics from Emmerich, reduces supplier complexity and helps maintain production continuity. For specific application questions or to confirm fitment in specialised setups, technical advice is readily available to complement the product documentation. For reliable integration of TECWERK clamping components, contact Metav Werkzeuge for tailored advice and quick supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000834141NW Label: Clamping screw M20 x 2 x 20 L 20 mm TECWERK Product type: Clamping screw Brand: TECWERK Facts Thread: M20 x 2 x 20 Overall length: 20 mm Suitable for chuck Ø: 32 mm Packaging unit: 1 Special features For face chucks For clamping tools with cylindrical shank Lateral driving surface to DIN 1835-B Nominal thread diameter M20 x 2 x 20 FAQ What chuck size is this clamping screw made for? This clamping screw is specified for use with a 32 mm clamping chuck and suits systems designed for that chuck diameter. Can the clamping screw be used with tools to DIN 1835-B? Yes, the component is intended for clamping tools with a cylindrical shank and lateral driving surface according to DIN 1835-B. What is the product identification for ordering? Order using SKU 2000834141NW for the TECWERK clamping screw M20 x 2 x 20. Is the thread specification standardised for workshop replacement? The M20 x 2 thread follows standard nominal values, enabling straightforward replacement and interchange in compatible toolholders. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
225mm Milling Arbor Wrench DIN 6368 For 27mm Arbor, Hardened Special Steel - TECWERK
Take advantage of a robust, standards‑compliant tool that combines DIN 6368 conformity with a hardened, blued finish and a practical 225 mm length for dependable tightening and loosening of milling arbor drawbar screws; order or request advice via Metav Werkzeuge for seamless workshop integration. Milling arbor wrench DIN 6368 — for arbor Ø 27 mm (TECWERK) The milling arbor wrench DIN 6368 designed for tightening and loosening milling arbor drawbar screws, suitable for arbors with a 27 mm diameter and workshop use Conforms to DIN 6368 Suitable for arbor Ø 27 mm Hardened special steel, blued finish 225 mm overall length Secure clamping through standardised design A tool engineered to meet DIN 6368 ensures consistent, reproducible results when securing milling cutters. The standardised geometry reduces the risk of incorrect engagement with drawbar screws and supports reliable torque application. By using a wrench that matches recognised norms, machine changeovers become more predictable and process control improves, which in turn reduces rework and downtime. The clear alignment to standards delivers a measurable increase in operational consistency for production environments. Durable construction for everyday workshop use Crafted from special steel, the tool is hardened and finished in a blued tone to provide corrosion resistance and wear protection during repeated use. This robust treatment extends service life in harsh conditions and supports long intervals between replacements, making the wrench a cost‑effective choice for maintenance teams. The solid construction contributes to dependable mechanical behaviour when tensioning and loosening fastenings, reducing the likelihood of deformation under load. Straightforward compatibility with common arbor sizes Designed specifically for arbors of 27 mm diameter, the wrench matches the seating and engagement requirements of typical milling drawbar screws produced to DIN 6367 dimensions. The defined fit minimises stripping and slippage, which helps preserve both the tool and the arbor interface. Clear specification reduces the time spent verifying suitability: technicians can identify compatibility from the marked diameter and the referenced standard, simplifying tool allocation in mixed‑equipment workshops. Ergonomic handling and practical dimensions With an overall length of 225 mm, the tool balances reach and control for both bench and machine‑mounted operations. The length offers sufficient leverage for efficient torque application without compromising manoeuvrability in confined setups. The compact but solid profile supports fast, repeatable interventions during cutter changes, contributing to smoother workflow in milling operations. The familiar form factor integrates easily into existing tool trolleys and maintenance kits, supporting rapid access when needed. For reliable tightening and loosening of milling arbor drawbar screws, request the TECWERK milling arbor wrench via Metav Werkzeuge — contact our advisors at info@metav-werkzeuge.com or call +49 2822 7131930 for precise application guidance and supply from Emmerich. Technical data Article number: 4000832447NW Type: Milling arbor wrench Standard: DIN 6368 Core specifications Overall length: 225 mm Suitable for arbor diameter: 27 mm Application: tightening and loosening milling arbor drawbar screws Materials / Special features Special steel, hardened and blued finish Conforms to DIN 6367 dimensions where applicable Pack unit: 1 FAQ What is the intended use of the wrench? The wrench is intended for tightening and loosening milling arbor drawbar screws and is specified for this application in the product documentation. Which arbor diameter does the tool fit? The tool fits arbors with a 27 mm diameter; compatibility is stamped and listed to ensure correct selection. Is the wrench suitable for continuous industrial use? The hardened special steel construction and blued finish make the wrench suitable for regular workshop use and repeated tool changes. Does the tool comply with recognised standards? Yes, the wrench is manufactured to DIN 6368 and intended to be used in conjunction with drawbar screws produced to DIN 6367. What is the overall length and why does it matter? The overall length is 225 mm, which provides a balance of leverage and accessibility for typical milling setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
250mm Arbor Wrench For Collet Ø32mm, DIN 6368 Hardened Steel - TECWERK
Take advantage of the DIN 6368 conformity, the fit for a 32 mm arbor and the 250 mm length to ensure secure tightening and safe access to cutter clamping screws; order the item directly via Metav Werkzeuge or ask the consultants for further specification support. TECWERK milling arbor key DIN 6368 – for 32 mm arbor, 250 mm length The milling arbor key DIN 6368 is designed for tightening and loosening milling cutter clamping screws on 32 mm arbors, ensuring compliant and repeatable clamping in production and workshop environments. DIN 6368 standardised design For arbors with 32 mm diameter 250 mm overall length for good reach Special hardened steel with blued finish Precision fit reduces setup time and rejects The tool delivers a DIN 6368 conforming interface that matches industry-standard arbors and clamping screws, which reduces calibration and setup variance. Because the key is matched to a 32 mm arbor diameter, spindle interfaces seat consistently, lowering the risk of incorrect torque application and minimising costly rework. The standardised design supports leaner changeover routines and contributes directly to steady production flow. Robust construction for long service life Manufactured from special hardened steel and finished to a blued tone, the implement resists wear and surface corrosion under workshop conditions. The heat-treated core increases resistance to edge deformation during repeated use, so tool life is extended and replacement intervals are reduced. This durability translates into lower downtime and a more predictable maintenance cadence for machining operations. Designed for safe access and confident handling The 250 mm overall length provides additional reach for cutters recessed in adapters or tight set-ups, while preserving manual control during torque application. The geometry focuses force transfer to the clamping interface, making the action of tightening and loosening the clamping screws efficient without overstressing adjacent components. In practice, this improves operator comfort and reduces the chance of slippage that could damage tooling. Standards compliance and clear application scope Tool function is specified for use with cutter clamping screws in accordance with DIN 6367, ensuring compatibility with common arbor assemblies. Marked conformity gives procurement and quality teams an objective reference when specifying tools for machining stations, enabling straightforward integration into existing tool inventories and maintenance procedures. The compact specification supports both production lines and specialist workshops requiring reliable, standards-based equipment. For reliable DIN 6368 conformity and efficient arbor servicing, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for procurement and technical guidance on the TECWERK milling arbor key (SKU 4000832441NW). Technical data Article number: 4000832441NW Product type: Milling arbor key Manufacturer: TECWERK Standard: DIN 6368 Packaging unit: 1 Core measurements Overall length: 250 mm Suitable for arbor diameter: 32 mm Special features For tightening and loosening cutter clamping screws (DIN 6367) Special steel, hardened and blued finish Conforms to DIN 6368 FAQ What arbor diameter is this key intended for? The TECWERK milling arbor key is intended for arbors with a 32 mm diameter and is specified accordingly in the product documentation. Does the tool meet an industry standard? Yes, the key is manufactured to DIN 6368 and is suitable for use with clamping screws specified under DIN 6367. What is the total length and why does it matter? The overall length is 250 mm, which gives improved reach into recessed assemblies while maintaining control during tightening and loosening. What material and finish are used for durability? The key is made from special hardened steel and is tempered to a blued finish to enhance wear resistance and surface protection. Can this key be used for other arbor sizes? The tool is dimensioned for a 32 mm arbor; use on non‑specified diameters is not recommended as it may compromise clamping security and compliance. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com