250mm ER Collet Wrench For ER 25 Collets, Hardened Zinc Plated With Hanging Hole - TECWERK
The combination of an ER 25 key size, hardened and zinc-plated special steel, and an integrated hanging hole ensures dependable clamping of ER/ESX collet nuts to DIN 6499 while simplifying storage and handling; order directly via Metav Werkzeuge or consult the technical team for specification checks. Collet Spanner ER 250 (ER 25) — TECWERK, hardened & zinc-plated The Collet Spanner ER 250 (ER 25) is a workshop tool designed for secure tightening of ER/ESX collet nuts in machining and toolroom applications, compliant with DIN 6499. Secure clamping of ER/ESX collet nuts Hardened, zinc-plated special steel construction Designed for ER 25 collet systems Built-in hanging hole for convenient storage Precision clamping that supports consistent machining results The span key is engineered for reliable torque application when securing ER/ESX collet nuts; its compatibility with DIN 6499 ensures correct fit and repeatable clamping performance across standard collet systems. Manufactured from special steel that is hardened for wear resistance and zinc-plated for corrosion protection, the tool reduces the risk of slippage and deformation during routine use. This results in fewer re-adjustments, less downtime and a more predictable machining process — a direct efficiency advantage in production and maintenance environments. Durable design for a long service life and low maintenance Constructed with longevity in mind, the spanner’s hardened core resists rounding and mechanical wear, while the zinc-plated finish provides an added layer of corrosion resistance in mixed workshop conditions. The robust material choice minimises the need for frequent replacement and helps contain operating costs over time. By selecting a tool that resists wear, the workshop benefits from consistent clamping accuracy and reduced spare-part turnover — practical advantages that support steady productivity. Ergonomic handling and organised storage for faster workflows The tool’s form factor supports quick engagement with ER 25 collet nuts, allowing for efficient operation during routine changeover and maintenance tasks. A practical hanging hole is incorporated for easy storage at the bench or on pegboards, keeping the tool accessible and reducing search time. Clear labelling of the key size and the simple, sturdy construction mean less guesswork during busy shifts, helping to streamline workflow and improve operator satisfaction. For specification queries, supply options or to request technical advice on the TECWERK collet spanner, contact Metav Werkzeuge in Emmerich by e-mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — assistance and fast delivery options are available from the Emmerich site. Technical data Article number: 4000832444NW Product name: Collet spanner ER 250 (ER 25) AMF Product type: Collet spanner Core data Key size: ER 25 Packaging unit: 1 Materials & special features Special steel, hardened and zinc-plated For secure clamping of ER/ESX collet nuts to DIN 6499 Integrated hanging hole FAQ Which collet systems are compatible with this spanner? The TECWERK collet spanner is intended for ER/ESX collet nuts and conforms to DIN 6499, ensuring compatibility with standard ER 25 systems. Is the tool protected against corrosion in workshop conditions? Yes, the spanner features a zinc-plated surface that provides corrosion resistance for general workshop environments. Can the spanner be used for heavy-handed tightening? The spanner’s hardened construction resists deformation under normal tightening loads; however, torque should follow the clamping recommendations for ER 25 collets to avoid overloading. How does the hanging hole benefit everyday use? The integrated hanging hole permits convenient storage on pegboards or racks, keeping the spanner readily accessible and reducing downtime spent searching for tools. Is this product supplied as a single unit or in sets? The item is supplied as a single unit; the packaging unit is listed as 1 (one). Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
28mm Milling Draw Bolt M10 For 22mm Clamping Diameter, L18 K7 - TECWERK
Take advantage of a standardised M10 thread and DIN 6367 conformity for consistent clamping and reduced setup time; the compact 18 mm overall length and 28 mm head diameter ensure fit in confined toolholders. Order the TECWERK draw-in screw directly via Metav Werkzeuge or ask our consultants if required. TECWERK draw-in screw M10 — for clamping Ø 22 mm, DIN 6367 A robust draw-in screw by TECWERK, designed to secure milling cutters and tool assemblies with a standard M10 thread for clamping diameters of 22 mm. M10 thread for secure connection Suitable for clamping Ø 22 mm Conforms to DIN 6367 standard Compact 18 mm overall length Consistent clamping through standardised design The TECWERK draw-in screw provides a standard M10 thread combined with compliance to DIN 6367, enabling reliable interchangeability with common milling toolholders. This standardisation reduces the risk of misalignment and minimises rework: compatible interfaces lead to predictable axial positioning and improved repeatability of setups. For production environments where every micrometre of run-out matters, the mechanical consistency contributes directly to machining accuracy and lower scrap rates. Compact dimensions that suit confined toolholders Measured to a total length of 18 mm with a head diameter of 28 mm and a head height of 7 mm, the component's form factor prioritises space efficiency without compromising clamping force. The reduced overall length supports installations in tight collet or clamping systems while the larger head diameter distributes contact forces to maintain stable seating. These dimensional details simplify selection for assemblies where clearance and secure seating are decisive. Streamlined handling and compatibility in workshop use Specified for a clamping Ø 22 mm, the fastening element integrates into conventional clamping systems used in milling operations and CNC setups. The straightforward geometry and conformity to recognised standards enable faster changeovers and easier inventory management in the workshop. As a mechanically simple, maintenance-light solution, the screw supports uninterrupted production cycles and reduces the time spent on locating specialised fasteners. Supply reliability and professional sourcing Sourcing through Metav combines product availability with experienced procurement support: Metav offers a broad industrial range and a dependable supply chain, backed by the trust of over 48,000 customers and a catalogue of more than 250,000 products. The compact design and standard thread choice make this component a practical addition to stock lists for maintenance departments, toolrooms and precision workshops that prioritise consistent availability and verified compatibility. For availability checks or procurement advice regarding the TECWERK draw-in screw (SKU 2000834073NW), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for reliable delivery and application guidance. Technical data Article number: 2000834073NW Label: Draw-in screw M10 for clamping Ø 22 mm TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M10 Overall length L: 18 mm Head diameter D: 28 mm Head height K: 7 mm Suitable for clamping Ø: 22 mm Special features Conforms to DIN 6367 axite enrichment: L: 18mm · K: 7mm · D: 28mm SKU: 2000834073NW FAQ What thread does this clamping screw use? The component uses an M10 thread; the TECWERK draw-in screw (SKU 2000834073NW) is specified for standard M10 applications. Which clamping diameter is this screw suitable for? This fastening element is specified for a clamping Ø of 22 mm and is intended for use with compatible clamping systems and toolholders. Are the dimensions standardised for easy replacement? Yes, the part conforms to DIN 6367 and features an overall length of 18 mm, a head diameter of 28 mm and a head height of 7 mm for predictable replacements. Is this screw suitable for workshop and CNC use? The design and standard conformity make the screw appropriate for both workshop and CNC environments where standard M10 draw-in fixings are required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
32mm Drive Ring For 16mm Arbor, For Keyed Slot Milling Cutters, DIN 6366 - TECWERK
Take advantage of the standardised fit and compact design to ensure reliable torque transmission and simple integration into existing arbor systems; order the part directly via Metav Werkzeuge or contact their consultants for clarification on compatibility and supply. TECWERK drive collar 32 mm (for 16 mm arbors) – DIN 6366 The TECWERK drive collar 32 mm is a compact drive component, compliant with DIN 6366, engineered to transfer torque to mounted cutters with a transverse groove and to fit 16 mm arbor shanks. DIN 6366 compliance for standardised fit Designed for mounted cutters with transverse groove Compatible with 16 mm arbor shanks Outer diameter 32 mm for secure engagement Reliable torque transfer for mounted cutters The drive collar delivers consistent mechanical engagement between the arbor and mounted cutters, ensuring dependable transmission of rotational force. By engaging the cutter’s transverse groove, the component reduces the risk of slippage under load, which supports uninterrupted machining cycles. Compliance with DIN 6366 guarantees interchangeability with other standardised components, simplifying maintenance planning and spare-part management for small workshops and production facilities alike. Standardised geometry for straightforward integration With its compact geometry, the component is designed to sit precisely on a 16 mm arbor shank and engage mounted cutters with transverse grooves. The standardised design allows fast replacement and predictable alignment, which reduces setup time during cutter changes. For operators less familiar with technical specifications, the collar can be understood as a simple mechanical interface: it locks into a groove on the cutter and the arbor, converting the spindle’s rotation into usable cutting torque without additional adapters. Practical workshop benefits and trusted supply In routine workshop use, the collar’s straightforward function supports reliable machining of profiles and edges when used with compatible mounted cutters. The compact outer diameter provides secure engagement while keeping the assembly small and easy to handle, which is particularly useful where space on the arbor is limited. Supplied as a single unit, the part helps maintain a minimal inventory strategy when paired with other standardised components from a single supplier, reducing administrative overhead and complexity. Choose the TECWERK drive collar for standardised, reliable torque transfer and contact Metav Werkzeuge for technical guidance or procurement from their Emmerich centre Technical data Article number: 2000834086NW Product: Drive collar (Mitnehmerring) Brand: TECWERK Packaging unit: 1 Description: to transfer mounted cutters with transverse groove, compliant with DIN 6366, for use on mounted cutter arbors Dimensions / Core data Outer diameter: 32 mm Arbor fit diameter: 16 mm a dimension: 10 mm b dimension: 8 mm h dimension: 5 mm Applications / Special features Standard: DIN 6366 Intended for mounted cutters with transverse groove Fits mounted cutter arbors (Aufsteckfräserdorne) Compact, standardised design for easy replacement FAQ What is the primary application of this drive collar? The drive collar is intended for torque transfer to mounted cutters with a transverse groove; the TECWERK drive collar 32 mm secures engagement between cutter and 16 mm arbor shank. Which arbor diameter does the collar fit? The collar is designed to fit a 16 mm arbor shank, providing a standardised connection for compatible mounted cutters. Is this component compatible with industry standards? Yes, the part conforms to DIN 6366, ensuring compatibility with other standardised fittings and reducing the need for custom adapters. How is the item identified for ordering or stock management? The item is listed under article number 2000834086NW (SKU 2000834086NW) and described as a TECWERK drive collar for mounted cutters. Can the collar be used in compact setups with limited arbor space? The compact outer diameter of 32 mm and low-profile dimensions make the collar suitable for installations where space on the arbor is restricted. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
35mm Clamping Screw M12 For Clamping Ø27mm, L22mm K8mm - TECWERK
Compact M12 thread and compliance with DIN 6367 combine to provide dependable clamping for a 27 mm toolholder; take advantage of the compact 22 mm length and 35 mm head for secure seating. Order this TECWERK component directly via Metav Werkzeuge or consult our specialists for fit verification. TECWERK M12 milling clamping screw – compact M12 thread for 27 mm clamping diameters The TECWERK M12 milling clamping screw serves as a compact draw-in screw for milling toolholders and clamping systems, optimised for applications with a clamping diameter of 27 mm M12 thread for standard toolholders Designed for clamping Ø 27 mm Overall length 22 mm, head Ø 35 mm DIN 6367 conformity Consistent clamping performance for accurate machining A precise M12 thread combined with conformity to DIN 6367 ensures repeatable seating and predictable force transmission, which is crucial for milling operations that demand positional accuracy. The screw’s geometry supports consistent axial pull and stable contact between the tool and holder, reducing micro‑movement during cuts. This results in improved surface finish and tool life, as fewer compensatory adjustments are required during set‑up. The standardised specification also simplifies inventory planning in production environments where interchangeability and traceable components are essential. Faster set-up and less downtime through compact dimensions With an overall length of 22 mm and a head diameter of 35 mm (head height K 8 mm), the component is designed for compact assemblies and tight tool pockets. The short shank minimises protrusion into the toolholder, enabling quicker insertion and removal while maintaining a secure clamp. For workshops that cycle tools frequently, these dimensions translate into measurable time savings at every tool change and fewer obstructions during handling and storage, supporting leaner workflows and higher machine uptime. Industrial compatibility and reduced sourcing complexity Specification to an established standard makes the screw suitable for a broad range of holders and milling systems that accept an M12 draw-in element and a 27 mm clamping interface. The standardised profile facilitates cross‑brand compatibility and reduces the risk of procurement errors in mixed fleets. Where standardisation is part of a quality strategy, the use of DIN‑compliant components simplifies documentation and quality audits while supporting consistent assembly procedures across departments. Practical applications and workshop recommendations This clamping screw is aimed at industrial workshops, tool rooms and maintenance departments that require compact, standardised fastening for milling toolholders with a 27 mm clamping diameter. Given the absence of material data in the specification, compatibility checks with existing holders and any surface‑treatment requirements should be confirmed before installation. For bespoke toolrooms or retrofit projects, selecting a DIN‑specified fastening element like this one reduces the need for custom adaptations and helps maintain reliable clamping under routine operational stresses. For compatibility checks or to secure the correct TECWERK M12 component for a 27 mm toolholder, contact Metav Werkzeuge for tailored advice and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000834074NW Product: Milling clamping screw Manufacturer: TECWERK Core data Thread: M12 Suitable for clamping diameter: 27 mm Overall length (L): 22 mm Head diameter (D): 35 mm Head height (K): 8 mm Pack unit: 1 Special features Conforms to DIN 6367 Compact design for confined tool pockets FAQ What thread does the clamping screw use? The clamping screw uses an M12 thread as specified for the TECWERK milling clamping screw (SKU 2000834074NW). Which clamping diameter is the screw intended for? The component is specified for a clamping diameter of 27 mm, matching standard toolholders that accept this interface. What are the key dimensions to check before installation? Check the overall length 22 mm, head diameter 35 mm and head height K 8 mm to ensure clearance and correct seating in the holder. Does the screw meet an industrial standard? Yes, the screw is manufactured to DIN 6367, supporting interchangeability and documented quality requirements. Is material information provided for corrosion or lubrication considerations? Material is not specified in the provided data; it is recommended to confirm material and surface treatment requirements prior to use. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
360mm HSK63 Tool Holder Compact 10-Slot Polypropylene, Impact and Coolant Resistant - TECWERK
Take advantage of the combination of robust HSK63 mounting, a space-saving compact 10-slot layout and durable polypropylene construction for orderly tool storage and faster changeovers; order the TECWERK tool holder directly via Metav Werkzeuge or request technical advice from Metav's consultants. TECWERK Tool holder HSK63 — polypropylene, compact 10-slot (360 x 180 x 60 mm) The TECWERK Tool holder HSK63 polypropylene compact is a workshop-grade storage insert designed for organised holding of HSK63 tool interfaces in production and service environments. HSK63 interface for secure mounting Compact 10-slot design Polypropylene, impact-resistant Acid- and coolant-resistant, black Optimised storage that shortens setup times The compact 10-slot layout and defined HSK63 receptacles create a tidy system for staging tooling prior to machine changeovers. The structured arrangement reduces search and handling time, supporting quicker tool changeovers and improved process flow. Specified dimensions 360 x 180 x 60 mm allow integration into benches, trolleys or drawer systems; the modest mass (170 g) keeps handling effortless while preserving positional stability. Clear organisation of the tooling inventory enhances operational efficiency without additional handling equipment. Durable polypropylene body built for workshop conditions Manufactured from polypropylene, the carrier offers resistance to impacts and breakage typical in busy shops. The polymer is acid-resistant and coolant-resistant, so exposure to cutting fluids or mild chemical residues during routine handling will not compromise function. The combination of chemical compatibility and mechanical resilience reduces replacement frequency and maintenance effort. The material choice also keeps the insert lightweight while maintaining the dimensional stability required for repeatable seating of the HSK63 interfaces. Secure seating and compatibility with HSK63 tooling The HSK63 interface pockets ensure axial and radial support for holders and adaptors, preserving concentric alignment during storage and handling. This precise seating minimises the risk of damage to taper faces and reduces the need for rework after storage. The compact format provides ten defined positions in a small footprint, which is advantageous for workshops aiming to consolidate tool storage without increasing footprint. The product name appears on technical specifications and order references for accurate identification. Practical benefits for workshop logistics and safety By combining a robust polymer construction with a dedicated HSK63 layout, the holder reduces clutter and protects expensive tool tapers from knocks and contamination. The design supports a safer workshop environment by preventing loose tooling on benches and transport trolleys. Rational gains include reduced downtime for locating tools and fewer tool replacements due to accidental damage, while the organised presentation of tooling aids inventory checks and shift handovers. For tailored supply or advice on integrating the TECWERK HSK63 tool holder into existing storage systems, contact Metav Werkzeuge — Metav's Emmerich team will provide reliable fulfilment and application guidance. Technical Data Article number: 9000453684NW Brand: TECWERK Product type: Tool holder Facts Interface: HSK63 Version: compact 10-slot Dimensions: 360 x 180 x 60 mm (B x T x H) Weight: 0.17 kg Special features Material: polypropylene Colour: black Impact- and break-resistant Acid- and coolant-resistant FAQ What interface does this holder accept? The holder accepts HSK63 tool interfaces and is made for secure seating of HSK63 holders. Is the insert suitable for use with cutting fluids? Yes. The polypropylene body is coolant-resistant and resists common workshop fluids. How many tools can be stored in one compact unit? The compact version provides ten defined slots for organised storage of ten HSK63 interfaces. What are the external dimensions for drawer or cupboard planning? Overall dimensions are 360 x 180 x 60 mm, suitable for bench inserts or small storage drawers. Is the unit lightweight for frequent handling? At approximately 170 g, the unit is lightweight while retaining structural rigidity for repeated use. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Drive Ring For 22mm Arbour, For Slot-Coupled Milling Cutters, DIN 6366 - TECWERK
Robust DIN 6366 compliance and precise fit for mounted cutters with a transverse groove ensure reliable torque transmission; with clear dimensional data (d 22 mm, D 40 mm, a 12 mm, b 10 mm, h 5.6 mm), the drive ring supports consistent machining accuracy and simple stock management — order directly via Metav Werkzeuge or contact our advisors for matching arbors and spare parts. TECWERK Drive Ring for Ø22 mm Arbor (DIN 6366) – Positive-drive coupling The TECWERK Drive Ring is a DIN 6366-compliant coupling ring designed to transfer torque from mounted cutters with a transverse groove to matching arbors, offering standardised compatibility for toolrooms and production workshops. DIN 6366 compliance Fits Ø22 mm bore, D 40 mm outer diameter For cutters with transverse groove Precise positive-drive engagement Secure torque transmission for consistent machining results A standardised drive ring that meets DIN 6366 provides a defined mechanical interface between cutter and arbor, reducing slippage and wear. The ring engages the cutter's transverse groove to create a positive drive, which converts spindle torque directly into cutter rotation. This technical design mitigates micro-movements under load, enhancing concentricity and therefore the overall machining accuracy of mounted milling operations. Clear compatibility data to simplify tool management Marked dimensions such as d 22 mm (bore) and D 40 mm (outer diameter), together with the specified a 12 mm, b 10 mm and h 5.6 mm, allow quick verification when matching the component to existing arbors and cutters. Using standardised coupling parts reduces inventory complexity and downtime: maintenance teams and purchasing agents can identify replacements unambiguously and keep production running with minimal interruption. Practical benefits on the shop floor and in the supply chain The coupling ring’s straightforward function supports fast replacement and reliable repeatability during cutter changes, which is especially valuable in high-mix or short-run production. By ensuring secure mechanical engagement, the component contributes to predictable tool performance and fewer rejects. Suitable for workshop environments and tool distributors, the part supports operational continuity without requiring additional calibration or special fixtures. For standardised, reliable clamping of mounted cutters, source the TECWERK drive ring through Metav Werkzeuge — contact Metav Werkzeuge for advice, availability and compatible arbors at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000834087NW Label: Drive ring for arbor Ø22 mm (TECWERK) Product type: Drive ring Brand: TECWERK Packing unit: 1 Dimensions Bore (d): 22 mm Outer diameter (D): 40 mm a: 12 mm b: 10 mm h: 5.6 mm Applications / Special features Complies with DIN 6366 For mounted cutters with transverse groove Suitable for use with mounted cutter arbors Positive-drive coupling for reliable torque transfer FAQ What standard does this drive ring conform to? The drive ring conforms to DIN 6366, ensuring a standard interface for mounted cutters with a transverse groove. Which bore and outer diameter are specified for this ring? The component is specified with a bore of 22 mm and an outer diameter of 40 mm (SKU 2000834087NW). Can this ring be used with any mounted cutter? This ring is suitable for mounted cutters that feature a transverse groove and match the listed dimensions; compatibility depends on cutter groove geometry and arbor design. How does the coupling ring improve machining accuracy? By providing a positive drive engagement, the ring reduces slippage and maintains concentricity, which supports consistent cutting conditions and improved surface quality. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
44mm HSK 100 Coolant Delivery Tube 16mm, M24 x 1.5 - TECWERK
Reliable internal cooling, compact dimensions and a secure M24 x 1.5 threaded connection deliver consistent machining performance and simple retrofitting. Order the coolant transfer tube directly via Metav Werkzeuge or consult our specialists for integration advice. Coolant transfer tube HSK 100 – DIN 69893 Form A, thread M24 x 1.5 (TECWERK) The Coolant transfer tube HSK 100 supplies internal coolant to hollow-shank taper tools in accordance with DIN 69893 Form A, designed for precise cooling of the cutting zone in CNC machining operations. For hollow-shank taper tools ISO 12164 Compatible with HSK 100, DIN 69893 Form A Threaded connection M24 x 1.5 Compact length 44 mm, diameter 16 mm Precision coolant delivery for consistent cutting performance The component offers internal coolant delivery that directs fluid through the tool shank to the cutting edge, reducing temperatures and improving tool life. By integrating a dedicated coolant passage, the arrangement supports stable cutting conditions and better chip control, which translates into fewer tool changes and more predictable cycle times. The adherence to DIN 69893 Form A ensures compatibility with standard hollow-shank systems and predictable hydraulic behaviour in high-demand machining environments. Compact design that simplifies toolholder integration With a total length of 44 mm and a diameter of 16 mm, the transfer tube is dimensioned for compact integration inside HSK toolholders without compromising coolant flow. The M24 x 1.5 thread provides a standardised connection for secure mounting and repeatable positioning. These physical characteristics enable easy retrofitting of existing holders or straightforward inclusion in new tool assemblies, reducing setup time and supporting efficient production changeovers. Leak-resistant connection and reliable sealing A sealing ring is included to promote a leak-resistant joint between the coolant passage and the toolholder interface, helping to maintain consistent coolant pressure at the cutting edge. The secure threaded interface combined with the sealing element minimises the risk of fluid loss and contamination of the spindle, which in turn protects bearings and extends maintenance intervals. This reliability supports uninterrupted machining and contributes to predictable maintenance planning. Practical advantages for workshop and production environments The part is engineered for use with hollow-shank taper tools per ISO 12164 and is suitable for straightforward inventory management thanks to its compact profile. Its conformity with established standards reduces specification complexity when equipping fleets of toolholders, and the simple geometry facilitates inspection and replacement during routine maintenance. Technical guidance is available to assist with selection and fitment to ensure compatibility with existing tool systems. Contact Metav Werkzeuge for fast supply from Emmerich and tailored integration advice for TECWERK coolant transfer solutions Technical Data Article number: 4000832714NW Designation: Coolant transfer tube HSK 100 Brand: TECWERK Facts Standard: DIN 69893 Form A Thread: M24 x 1.5 Diameter: 16 mm Total length: 44 mm Packaging unit: 1 Special features For hollow-shank taper tools ISO 12164 (DIN 69893) Form A Incl. sealing ring L: 44 mm · d: 16 mm · D: M24 x 1.5 mm Suitable for installation in HSK 100 interfaces FAQ What is the primary function of the coolant transfer tube? The coolant transfer tube provides internal coolant delivery to the cutting zone when fitted to HSK 100 toolholders, ensuring targeted cooling and improved chip evacuation. Is the transfer tube compatible with standard HSK systems? Compatibility is given with HSK 100 interfaces according to DIN 69893 Form A; the Coolant transfer tube HSK 100 is designed to mate with hollow-shank taper tool systems per ISO 12164. What are the key connection and size specifications? The component features an M24 x 1.5 threaded connection, a diameter of 16 mm and a total length of 44 mm, providing a compact, standardised interface. Does the part include any sealing elements to prevent leaks? Yes, the item is supplied with a sealing ring to support a leak-resistant joint between the coolant passage and the toolholder interface for reliable operation. Can this transfer tube be retrofitted to existing toolholders? The compact geometry and standard thread specification facilitate retrofit into compatible HSK 100 assemblies; check holder compatibility before installation. Hersteller: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
46mm Drive Collar For Clamping Arbor 27mm Cutter Slot, 12mm Axial/12mm Radial/6.3mm Height - TECWERK
Take advantage of a standardised, DIN 6366-compliant ring that transmits torque cleanly to cutters with a transverse key; its compact dimensions (fits a 27 mm arbor with 46 mm outer diameter and 6.3 mm engagement) support fast, repeatable setups on mounted cutter arbors. Order the part directly via Metav Werkzeuge or request compatibility advice from our consultants. Drive ring for 27 mm arbor (Mitnehmerring) — DIN 6366, 46 mm outer diameter (TECWERK) Drive ring for 27 mm arbor designed to transmit torque to mounted cutters with a transverse key, suitable for use with mounted cutter arbors and compliant with DIN 6366 DIN 6366-compliant drive ring For cutters with transverse keyway Fits 27 mm arbor, 46 mm outer diameter Robust 6.3 mm engagement height Secure torque transmission for mounted cutters A standardised DIN 6366 design ensures the ring provides reliable, repeatable torque transfer to cutter bodies that have a transverse key. By engaging the keyway directly, the drive ring reduces rotational play and improves machining consistency, which translates into fewer rejects and less time spent on rework. This functional clarity makes the component an efficient choice for production environments where secure drive engagement matters. Compact dimensions that simplify integration With an outer diameter of 46 mm and a bore for a 27 mm arbor, the component fits neatly into common mounted cutter arbor assemblies. The specified 6.3 mm engagement height and matching shoulder measurements (a and b at 12 mm) permit secure seating without excessive bulk, enabling machines to retain their original clearance and balance. These compact dimensions help to shorten setup time and allow straightforward replacement in existing tool holding systems. Clear specifications to support procurement and inventory The part's concise technical specification removes ambiguity during procurement: standard compliance, intended use for cutters with a transverse key, and explicit dimensional values allow purchasing managers and toolroom planners to order the correct item with confidence. The fixed design lowers the risk of incorrect variants entering the tool cabinet and helps to maintain steady production flow through predictable interchangeability and straightforward stock keeping. For supply queries or compatibility checks on the TECWERK drive ring, contact Metav Werkzeuge in Emmerich for prompt advice and reliable delivery to the workshop bench. Technical data Article number: 2000834088NW Label: Drive ring for 27 mm arbor (Mitnehmerring) Manufacturer: TECWERK Dimensions d: 27 mm D: 46 mm a: 12 mm b: 12 mm h: 6.3 mm Packaging unit: 1 Special features DIN 6366-compliant For cutters with transverse keyway Suitable for mounted cutter arbors FAQ Which arbor diameter does this drive ring fit? The drive ring fits a 27 mm arbor and is specified for use with mounted cutter arbors; reference SKU 2000834088NW for ordering. What standard does the ring conform to? The component is compliant with DIN 6366, which defines form and function for this style of drive engagement. What are the key dimensions of the part? Key dimensions: bore d = 27 mm, outer D = 46 mm, a = 12 mm, b = 12 mm, engagement height h = 6.3 mm. How does the ring secure the cutter on the arbor? The ring engages the cutter’s transverse keyway so torque is transmitted directly through the key engagement and the specified 6.3 mm engagement height ensures consistent mechanical contact. Manufacturer / Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
53mm Pull Stud DIN2080 Ott Ring Groove Internal Thread M16, d2 21.1mm d1 25mm d3 17mm L2 25mm - TECWERK
The robust DIN 2080 specification, internal M16 thread and SK40 taper compatibility ensure secure, repeatable clamping and reduced setup time; benefit from reliable fitment and the included sealing ring for consistent performance. Order the pull stud directly via Metav Werkzeuge or ask our consultants if needed. Anzugsbolzen DIN2080 Ott-Ringnut SK40 with internal M16 thread (TECWERK) A TECWERK pull stud designed to secure SK40 taper tool holders, complying with the DIN 2080 retention knob standard and intended for industrial clamping use. DIN 2080 retention knob standard Internal thread M16 for secure anchoring Compatible with SK40 taper holders Sealing ring included for secure fit Secure clamping for consistent machining The design follows the DIN 2080 specification to deliver repeatable retention forces for tool holders with an SK40 taper. By using a standardised retention knob, the system minimises runout variability and supports predictable tool behaviour during high-precision operations. The combination of standard compliance and precisely defined diameters contributes to reduced tool-change time and stable spindle engagement, which in turn supports steady production cycles and lower scrap rates. Threaded connection that enhances safety and serviceability An internal M16 thread provides a secure mechanical interface between the retention knob and the tool holder assembly. This internal threading simplifies installation and removal compared with external-thread variants, while the integrated sealing ring helps protect the connection from coolant ingress and swarf accumulation. The result is easier maintenance and longer service intervals for clamping components, translating into less unplanned downtime on the shop floor. Clear dimensional data for correct selection Critical dimensions such as d1, d2, d3 and length values are specified to ensure compatibility with matching tool holders and chucks. Precise diameters and length specifications mean that the component locates and seats exactly where intended, avoiding misfit or excessive play. This dimensional clarity supports engineers and buyers in verifying fitment against existing SK40 spindles and fixtures, reducing the risk of ordering incompatible parts. Reliability through industry fit and material neutrality Supplied to meet the DIN 2080 norm and labelled as an Ott-style ring nut, the component focuses on function and fit rather than decorative finishes. Where material choices and coatings are required in specific environments, selection should be based on documented requirements; the current specification prioritises conformity to retention standards and secure engagement. For customers seeking consistent clamping performance, this retention knob variant represents a pragmatic balance between standardised geometry and operational reliability. Contact Metav Werkzeuge for a reliable supply of TECWERK SK40 pull studs — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery from Emmerich. Technical data Article number: 2000832722NW Item: Anzugsbolzen DIN2080 Ott-Ringnut SK40 m.IG Taper: SK40 Thread: M16 Facts d1: 25 mm d2: 21.1 mm d3: 17 mm L1: 53 mm L2: 25 mm Special features DIN 2080 retention knob standard Ott-style ring nut design Sealing ring included Packaging unit: 1 FAQ Is this retention knob compatible with standard SK40 tool holders? Yes. The retention knob is designed to the DIN 2080 specification and is compatible with standard SK40 taper holders when the matching retention geometry is present. What does the internal M16 thread mean for installation? The M16 internal thread provides a secure, serviceable interface for installation and removal, reducing the chance of thread damage compared with some external-thread designs. Does the product include a sealing ring to protect against coolant and swarf? Yes. The Ott-ringnut variant specified includes a sealing ring to help protect the threaded connection from ingress and contamination during machining. Where can the dimensional details be found for verification? Dimensional values such as d1, d2, d3, L1 and L2 are published in the technical section above and can be used to verify fitment with existing SK40 tooling. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
54mm M16 Pull Stud SK40 ISO 7388-3 Form AF Without Bore, O-Ring Sealed - TECWERK
Take advantage of the ISO 7388-3 Form AF specification and SK40 compatibility for reliable clamping and reduced setup time; the M16 thread and O‑ring sealing further protect the spindle interface. Order the pull stud directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Pull stud ISO 7388-3 Form AF for SK40, M16 thread, O‑ring sealed The TECWERK Pull stud ISO 7388-3 Form AF is a retention knob for SK40 toolholders, engineered to ensure secure clamping in CNC machining centres and milling spindles. ISO 7388-3 Form AF standard SK40 taper interface M16 thread with O‑ring seal Proven standard for predictable clamping performance The ISO 7388-3 specification guarantees interchangeability and predictable mechanics when pairing toolholders and spindle clamping systems. As a precision pull stud, this component converts axial retention forces into a reliable grip, reducing the risk of tool slip under load. Conformance to the standard simplifies procurement and maintenance planning in production environments, since replacement parts follow a recognised dimensional and functional pattern rather than bespoke tolerances. Sealed design reduces contamination and downtime The sealed configuration with an O‑ring and the version supplied without a hole prevents coolant and chip ingress at the clamping interface. This protective measure contributes to longer service intervals and lowers the likelihood of spindle contamination, which in turn helps preserve spindle bearings and drawbar integrity. The retention component’s compact geometry (notably the 54 mm overall length and 26 mm collar length) keeps the mass low while maintaining the mechanical leverage required for consistent retention. Compact dimensions and clear compatibility cut setup time Key dimensions such as d1: 19 mm, d2: 14 mm and d3: 17 mm together with the M16 thread and SK40 taper make this retention knob suitable for standardised toolholding systems. Compatibility with common SK40 holders allows workshops to streamline tooling inventories and reduces the time spent checking fits during changeovers. The engineered form AF contour ensures axial engagement is repeatable, supporting consistent concentricity and improved process reliability. For secure clamping with the TECWERK pull stud and fast technical assistance, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for advice and supply from Emmerich. Product information SKU: 2000832710NW Standard: ISO 7388-3 Form AF (DIN 69872 Form B) Thread: M16 Shank: SK40 Manufacturer: TECWERK Product type: Pull stud Facts L1: 54 mm L2: 26 mm d1: 19 mm d2: 14 mm d3: 17 mm Special features O‑ring sealed without hole Form AF FAQ Is this pull stud suitable for standard SK40 toolholders? Yes. The TECWERK pull stud ISO 7388-3 Form AF is designed for use with SK40 taper toolholders and follows the ISO 7388-3 dimensional system, ensuring compatibility with standard clamping systems. What thread does the retention knob use and how does sealing work? The retention knob uses an M16 thread and is supplied O‑ring sealed, which prevents coolant ingress and helps maintain drawbar and spindle cleanliness for the TECWERK pull stud SKU 2000832710NW. Which dimensions are relevant for installation clearance? Key installation dimensions include an overall length of 54 mm, collar length 26 mm, and diameters d1 19 mm, d2 14 mm, d3 17 mm; these figures define the seating and axial engagement of the retention knob. Does the product conform to recognised standards? Yes. The retention knob conforms to ISO 7388-3 Form AF (DIN 69872 Form B), providing standardised geometry for interchangeability across compliant toolholding systems. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
54mm SK40 Pull Stud With Through Hole, ISO 7388-3 Form AD, M16 Thread - TECWERK
Take advantage of a hardened, ISO‑compliant design and precise thread grinding for secure retention and repeatable clamping; order the pull stud directly via Metav Werkzeuge or consult the advisors for batch availability. TECWERK pull stud ISO 7388-3 Form AD for SK40, M16 thread, with bore The TECWERK pull stud is a retention screw designed for steep‑taper toolholders to ensure reliable clamping in SK40 spindles and machining centres. Hardened to 58 ± HRC for long life M16 thread, ground to DIN tolerances ISO 7388-3 Form AD compatibility Parallel ground, blued finish, with bore Precision retention for consistent machining results The retention screw is engineered for standardised clamping: compliance with ISO 7388-3 and DIN 69872 Form A ensures interchangeability across machines and toolholders that use the steep taper standard. The combination of an SK40 shank and an M16 thread gives secure mechanical engagement with drawbar systems, reducing the risk of tool loosening during high‑force operations. Reliability in clamping translates into fewer interruptions on the shop floor and better repeatability of critical machining tasks. Robust hardening and finish reduce downtime Heat treatment to 58 ± HRC provides high wear resistance for continuous use in production environments, while the ground thread and parallel ground flange guarantee precise seating and even load distribution. The blued finish improves surface protection against corrosion in workshop atmospheres without affecting dimensional accuracy. Together these characteristics extend service intervals and support stable tool retention, which helps to maintain spindle life and minimise unexpected tool changes. Practical fit and shop‑floor compatibility Dimensions are tailored for consistent integration: overall and shoulder lengths and diameters are specified for precise contact with the spindle taper and clamping mechanism, and the integrated bore facilitates secure engagement and removal where required by the toolholder design. The form AD geometry suits a wide range of SK40 steep‑taper holders used in milling and drilling centres. Supplied as a single item, the component is a suitable replacement part to restore correct clamping performance and maintain production quality. Metav’s quality‑filtered supply chain in Emmerich ensures traceable sourcing and reliable availability for industrial and workshop customers. Contact Metav Werkzeuge for availability of TECWERK pull studs, technical clarification and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000832700NW Label: Anzugsbolzen ISO 7388-3 Form AD SK40 m.Bohr.TECWERK Standard: DIN 69872 Form A / ISO 7388-3 Thread: M16 Shank: SK40 Manufacturer: TECWERK Product type: Pull stud Facts Hardness: 58 ± HRC d1: 19 mm d2: 14 mm d3: 17 mm d4: 7.0 mm L1: 54 mm L2: 26 mm Special features For tools with steep taper according to DIN 69871 In‑use hardened 58 ± HRC; Eht 0.5–0.8 Thread soft‑ground to DIN Parallel ground and blued finish ISO 7388-3 Form AD Supplied with bore FAQ What thread size does this retention screw use? The retention screw uses an M16 thread as specified for the TECWERK pull stud (SKU 2000832700NW), ground to meet DIN tolerances. Is this pull stud compatible with SK40 toolholders? Yes. The component is made for SK40 steep‑taper holders and conforms to ISO 7388-3 Form AD / DIN 69872 Form A for compatibility across standard toolholders and spindles. How does the hardening rating affect service life? A hardness of 58 ± HRC increases wear resistance under cyclic clamping loads, so the stud sustains repeated use with reduced deformation and longer service intervals. What is the purpose of the bore in this design? The integrated bore is part of the geometry that supports secure engagement and removal in compatible clamping systems; it is supplied as specified for Form AD variants. Are the dimensions suitable for precision reconditioning of holders? Yes. The specified diameters and lengths (for example L1: 54 mm, L2: 26 mm) support precise seating in SK40 holders and are intended to restore correct clamping geometry. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
595mm SK40 Tool Holder Module 6, Polypropylene Durable Black - TECWERK
Take advantage of a lightweight, chemical‑resistant construction combined with a compact 6‑module layout to keep SK40 toolings organised and immediately accessible; order through Metav Werkzeuge or consult our advisors for tailored delivery options. Tool holder SK40 – PP 6‑module, 595 × 90 × 101 mm by TECWERK The Tool holder SK40 – PP 6‑module, 595 × 90 × 101 mm is a modular rack for secure storage and transport of SK40 tool mountings in machine shops and production cells. SK40 taper compatibility for CNC toolings Polypropylene body for impact resistance Acid- and coolant‑resistant construction Space‑saving 6‑module layout Organised tool storage that speeds machine setup A modular rack designed for SK40 mountings delivers measurable gains in efficiency by reducing search and handling times. The 6‑module format and the specified footprint of 595 × 90 × 101 mm allow a coherent arrangement of frequently used toolholders so changeovers run smoother. By keeping tool mountings grouped by type, the system contributes to shorter spindle idle times and a more predictable production flow. Durable polypropylene body for workshop environments Constructed from polypropylene, the tray offers impact‑ and break‑resistance, together with acid and coolant resistance, which means routine exposure to cutting fluids will not compromise the holder’s integrity. The material choice protects tooling investment and reduces replacement frequency, supporting a lower total cost of ownership for shop equipment. Lightweight design for safe handling and efficient storage At approximately 0.235 kg, the rack is intentionally lightweight, permitting quick repositioning within a toolroom or on a workbench without lifting aids. The compact depth and height ensure it occupies minimal bench and cabinet space, allowing better utilisation of storage areas while still keeping SK40 holders immediately accessible when needed. Practical integration with workshop logistics The modular tray is ready to be incorporated into standard shop processes: it accommodates SK40 tool mountings, is resistant to typical workshop contaminants, and presents a consistent, stackable footprint for locker or trolley systems. For specialist requirements or compatibility checks, Metav Werkzeuge provides application support and can advise on how best to integrate the rack into existing tool management routines. Contact Metav Werkzeuge for supply and integration advice on TECWERK tool holders – order via info@metav-werkzeuge.com or call +49 2822 7131930 for reliable delivery from Emmerich Technical data Article number: 9000453680NW Type: Tool holder Taper: SK40 Version: 6‑module Label: Tool holder SK40 a. PP module 6er B.595xT.90xH.101mm Facts Width: 595 mm Depth: 90 mm Height: 101 mm Weight: 0.235 kg Packaging unit: 1 Special features Material: polypropylene Impact‑ and break‑resistant Acid‑resistant Coolant‑resistant Colour: black Intended for tool mountings (SK40) FAQ What taper does the tool holder support? The TECWERK tool holder supports SK40 taper mountings and is designed specifically for storage and handling of SK40 toolholders (SKU 9000453680NW). Is the tray resistant to cutting fluids and acids? Yes, the polypropylene construction of the Tool holder SK40 – PP 6‑module is acid‑ and coolant‑resistant, making it suitable for environments where fluids are present. How large is the module and what is its footprint? The 6‑module tray measures 595 × 90 × 101 mm, providing a compact footprint that fits common bench and cabinet layouts. How much does the holder weigh and how easy is it to move? The tray weighs approximately 0.235 kg, which makes it easy to lift and reposition within the workshop without additional handling equipment. Can the holder be used for other taper systems? This rack is configured for SK40 mountings; for alternative taper systems or custom requirements, Metav Werkzeuge can advise on suitable solutions and compatibility. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
60 x 100 x 160 Montage Block SK40 Aluminium Mounting Block With Safety Screw - TECWERK
Benefit from the aluminium construction and secure SK40 taper support for fast, reliable toolholder changes; the compact design and integrated screw lock ensure stable bench mounting and safe horizontal operation — order directly via Metav Werkzeuge or consult our specialists for application advice. Montageblock SK40 Alu.TECWERK — aluminium mounting block with SK40 taper and secure screw lock The Montageblock SK40 Alu.TECWERK is a compact aluminium mounting block designed for safe assembly and disassembly of steep-taper toolholders in both horizontal and vertical positions Solid aluminium construction Secure SK40 taper support Horizontal and vertical use Screw lock prevents toolholder drop Reliable clamping for safe and accurate tool changes The mounting fixture combines a robust aluminium body with a precisely formed SK40 taper, delivering a secure seat for steep-taper toolholders and reducing the risk of play during handling. Thanks to the built-in screw lock, the toolholder is held firmly in place during horizontal assembly, which lowers the chance of accidental drops and supports safer workshop routines. This stability translates directly into fewer interruptions during tool changes and a reduced need for readjustments. Faster setups with straightforward handling A compact fixture that allows mounting in both horizontal and vertical positions speeds up workshop workflows by eliminating the need for multiple dedicated tools. The device’s design enables easy assembly and disassembly of toolholders, so changeovers are quicker and more efficient. For operations where time and repeatability matter, the ability to secure the toolholder reliably on the bench reduces setup time and contributes to a consistent production rhythm. Compact, durable design built for the workbench With a compact footprint and clearly defined dimensions, the unit fits neatly on standard workbenches and resists the daily wear of shop use. The aluminium construction offers a favourable strength-to-weight ratio: sturdy enough for repeated use while remaining easy to reposition when needed. The fixture has been conceived as a practical workshop companion that supports precise handling of steep-taper holders and keeps bench areas organised and safe. Contact Metav Werkzeuge for ordering details or technical advice on the TECWERK SK40 mounting block; our Emmerich team will help match the fixture to specific workshop requirements Technical information Article number: 2000832877NW Label: Montageblock SK40 Alu.TECWERK Product type: Mounting block Taper: SK40 Packaging unit: 1 Dimensions & key measures Width: 60 mm Height: 100 mm Length: 160 mm Materials & features Material: Aluminium For safe assembly/disassembly of steep-taper toolholders Usable in horizontal and vertical positions Stable, problem-free mounting on the workbench Securing screw to prevent toolholder from falling during horizontal use FAQ How does the block secure SK40 toolholders? The integrated screw lock holds the SK40 taper firmly in place, and the aluminium seat ensures a snug fit that prevents lateral movement when using the Montageblock SK40 Alu.TECWERK. Can the fixture be used vertically as well as horizontally? Yes, the design supports both horizontal and vertical mounting positions, enabling flexible handling of steep-taper toolholders during assembly and disassembly. What material is the mounting block made from and why does it matter? Constructed from aluminium, the block balances strength and weight, offering durable support while remaining easy to handle on the workshop bench. What are the exact dimensions of the mounting block? The mounting block measures 60 mm × 100 mm × 160 mm, as specified for the Montageblock SK40 Alu.TECWERK (SKU 2000832877NW). Is the product suitable for permanent bench installation? Yes, the unit is intended for stable bench mounting and designed for repeated use without compromising the secure seating of toolholders. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
60mm Pull Stud BT40 With 45° Shank, M16 Thread, 4mm Through Hole, JIS B 6339 - TECWERK
Take advantage of a compact solution that combines a BT40 taper, an M16 thread and a 45° conical seat with a 4 mm bore for stable, repeatable clamping. Order the TECWERK pull stud directly via Metav Werkzeuge or contact our consultants for application advice. Pull Stud JIS B 6339 BT40 with 45° bore (M16) — TECWERK A Pull Stud JIS B 6339 BT40 with 45° bore engineered for secure tool clamping in BT40 spindles, designed for reliable engagement and straightforward installation BT40 taper for standard toolholders M16 thread for secure clamping 45° conical seat with 4 mm bore Consistent clamping accuracy for productive machining The combination of a BT40 taper and an M16 threaded stem provides a mechanically stable interface that reduces axial play and runout. A precise seat geometry ensures repeatable axial location of the toolholder in the spindle, which in turn supports consistent machining tolerances and prolonged cutter life. The compact design is suitable where a reliable connection between spindle and toolholder is required without additional adapter work. Conical seat and bore support reliable retention The 45° conical seat creates an immediate axial datum between holder and spindle, while the 4 mm bore allows engagement of puller or retention devices where required. This feature set simplifies removal and handling during tool changes and maintenance. The conical seat geometry distributes clamping forces evenly, helping to maintain concentricity under cutting loads and lowering the likelihood of premature wear on mating surfaces. Clear dimensional data for easy compatibility checks Essential dimensions are provided for quick verification: overall length L1: 60 mm, functional length L2: 35 mm, shank diameters d1: 15 mm, d2: 10 mm, d3: 17 mm. These nominal values enable a straightforward compatibility assessment with existing toolholders and retention systems. Where spindle and tooling standards are critical, matching the taper form and thread size is the primary check to ensure safe operation. Robust choice for workshop stocking and maintenance A standardised pull stud streamlines toolroom logistics: one compact part can service multiple cutters and holders that accept BT40 tapers and M16 threads, reducing downtime and simplifying inventory management. The simple geometry and clear dimensions support quick inspection and replacement during scheduled maintenance, contributing to a dependable production flow and predictable machine availability. For procurement of TECWERK pull studs or to confirm fitment for a specific toolholder, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to arrange delivery from stock or to request technical clarification. Technical data Article number: 2000832723NW Manufacturer: TECWERK Product type: Pull stud Taper: BT40 Thread: M16 Measurements L1: 60 mm L2: 35 mm d1: 15 mm d2: 10 mm d3: 17 mm Bore Ø: 4 mm Seat angle: 45° Special features MAS BT 40 45° · with bore Label: Anzugsbolzen JIS B 6339 BT40 with bore Packaging unit: 1 FAQ Which taper and thread does this pull stud use? The Pull Stud JIS B 6339 BT40 with 45° bore by TECWERK features a BT40 taper and an M16 thread (SKU 2000832723NW). What are the key dimensions to check for fitment? Check L1: 60 mm, L2: 35 mm, and diameters d1: 15 mm, d2: 10 mm, d3: 17 mm when assessing compatibility for the Pull Stud JIS B 6339 BT40 with 45° bore. What is the purpose of the 4 mm bore in the stud? The 4 mm bore in the Pull Stud JIS B 6339 BT40 with 45° bore permits engagement with pullers or retention tools and assists in controlled removal and handling during tool changes. How does the 45° seat affect machining performance? The 45° conical seat on the Pull Stud JIS B 6339 BT40 with 45° bore provides a defined axial datum and uniform load distribution, helping to preserve concentricity under cutting forces. Is this pull stud suitable for use in high-speed operations? The Pull Stud JIS B 6339 BT40 with 45° bore is designed as a standard BT40 clamping component; suitability for very high spindle speeds depends on overall toolholder balance and machine specifications—verify balancing requirements before application. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
65mm Pull Stud SK50 With M24 Thread, ISO 7388-3 Form AF - TECWERK
Benefit from standardised ISO 7388/II compliance together with an SK50 taper and M24 thread for robust, repeatable clamping; order directly via Metav Werkzeuge or consult the team for application advice. TECWERK pull stud SK50 — ISO 7388/II Form B, M24 thread The TECWERK pull stud is a precision-engineered SK50 retention component for CNC toolholding, manufactured to ISO 7388/II Form B standards and designed for secure drawbar engagement in demanding machining operations. ISO 7388/II Form B compliance SK50 taper for secure retention M24 threaded connection Central bore for drawbar engagement Consistent clamping for heavy-duty machining The retention component delivers reliable clamping through a combination of standard conformity and robust geometry. Manufactured to fit an SK50 taper and equipped with an M24 thread, the part ensures stable axial fixation under high cutting forces, reducing the risk of tool pull-out. Compliance with ISO 7388/II indicates dimensional compatibility across toolholding systems, which simplifies replacement cycles and minimises setup downtime. The retained focus is on measurable performance and repeatability rather than subjective claims. Clear dimensions that explain fitting and function Critical dimensions are machined to allow precise engagement with the machine drawbar and toolholder. The stud features a head and shank geometry reflected in values such as d1: 29.1 mm, d2: 19.6 mm, d3: 25 mm, and d4: 11.55 mm, with overall lengths L1: 65.5 mm and L2: 25.55 mm. These figures define the seating depth, load-bearing area and engagement depth; the central bore improves secure drawbar contact and eases chip evacuation at the interface. Stating these dimensions allows planners to check compatibility with existing spindles and to forecast manufacturability without ambiguity. Practical workshop advantages and integration Integration into an existing clamping inventory is straightforward: the component is a standard retention stud compatible with conventional SK50 toolholders and standardised drawbar systems. The central bore and form designation support routine maintenance and predictable replacement intervals, lowering the overall cost of ownership through reduced downtime. Sourcing via an established distributor brings logistical benefits and a local point of contact for technical queries, helping maintain production flow and inventory control with confidence. The emphasis remains on functionality, traceability and proven design rather than marketing superlatives. Contact Metav Werkzeuge in Emmerich for stock availability, compatibility checks and technical guidance on SK50 retention hardware; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation through a local precision partner Technical data Article number: 2000832721NW Brand: TECWERK Product type: Pull stud (drawbar) Label: Pull stud ISO 7388/II Form B SK50 with bore Facts Standard: ISO 7388/II Form B Thread: M24 Taper: SK50 d1: 29.1 mm d2: 19.6 mm d3: 25 mm d4: 11.55 mm L1: 65.5 mm L2: 25.55 mm Special features Central bore for drawbar engagement Form: B Packaging unit: 1 FAQ What taper and thread does this retention stud use? The retention stud is manufactured for an SK50 taper and an M24 threaded connection, ensuring compatibility with corresponding SK50 toolholders. Is the retention stud compliant with industry standards? Yes, the component is specified to ISO 7388/II Form B, which supports interchangeability and consistent fit in standardised toolholding systems. How do the listed dimensions affect installation? Dimensions such as d1: 29.1 mm and L1: 65.5 mm determine seating and engagement depth; these values allow technicians to verify correct fitment with the machine spindle and drawbar. Does the stud include a central bore and what is its purpose? The part includes a central bore to improve drawbar engagement and to aid chip clearance at the interface, enhancing secure retention during machining. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
74mm Pull Stud ISO 7388-3 Form AF, SK50, M24 Thread - TECWERK
Take advantage of an ISO‑compliant, SK50 toolholding solution that combines repeatable clamping accuracy with simple maintenance; the M24 thread and O‑ring sealing reduce downtime and protect the taper connection. Order the pull stud directly via Metav Werkzeuge or consult their specialists for application advice. TECWERK pull stud ISO 7388‑3 Form AF – SK50, M24 thread, O‑ring sealed The TECWERK pull stud ISO 7388‑3 Form AF is a precision retention knob for SK50 taper toolholders, designed for secure clamping in CNC machining applications. ISO 7388‑3 Form AF compatibility SK50 taper shank for high rigidity M24 thread for secure clamping Sealed with O‑ring, no bore Consistent, standardised clamping for repeatable accuracy The ISO 7388‑3 specification ensures a defined interface between spindle and toolholder, which is crucial for repeatable runout and consistent machining results. Built to Form AF, the retention knob provides the geometric features required for reliable engagement with SK50 toolholders. The M24 thread and the specified lengths (L1: 74 mm, L2: 34 mm) are matched to the standard so that seating depth and draw force remain consistent across machines. Clear numerical values allow straightforward verification during incoming inspection and reduce guesswork in production planning. Protected connection reduces maintenance and prevents contamination Sealing the connection with an O‑ring and supplying the part without a bore lowers the risk of coolant ingress and chip accumulation around the taper interface. This protective detail extends the service intervals of both the toolholder and the spindle taper, which in turn supports higher machine availability. The compact diameters (d1: 28 mm, d2: 21 mm, d3: 25 mm) maintain structural strength while keeping mass low, aiding dynamic balance where it matters. Maintenance becomes a matter of simple checks rather than frequent corrective work, helping to keep set‑up times predictable. Practical compatibility and procurement advantages Because the design follows the ISO 7388‑3 Form AF standard and fits SK50 tapers, the component integrates with common toolholding ecosystems found in production and jobbing shops. The clear specification simplifies procurement and inventory management: the SKU 2000832711NW identifies the part precisely for reorders and cross‑checks. Selecting standardised retention knobs reduces spare‑parts diversity and shortens machine downtime when replacements are needed. For workshops pursuing reliability and straightforward logistics, this standardised component supports both objectives without compromise. Select the TECWERK ISO 7388‑3 Form AF pull stud for ISO‑compliant toolholding and contact Metav Werkzeuge for tailored selection and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number (SKU): 2000832711NW Standard: ISO 7388‑3 Form AF (DIN 69872 Form B) Thread: M24 Shank: SK50 Product type: Pull stud Manufacturer: TECWERK Packaging unit: 1 Notes: without bore; sealed with O‑ring Key measurements d1: 28 mm d2: 21 mm d3: 25 mm L1: 74 mm L2: 34 mm Features / Special features Form AF design Compliant with ISO 7388‑3 Sealed with O‑ring to reduce contamination No bore (solid configuration) SK50 taper compatibility FAQ Which standard does this pull stud follow? The TECWERK pull stud follows ISO 7388‑3 Form AF (DIN 69872 Form B) and is manufactured to the dimensions listed for consistent interchangeability (SKU 2000832711NW). Is the component suitable for SK50 toolholders? Yes, the design matches SK50 taper interfaces and provides the mechanical features required for reliable engagement and clamping. Does this retention knob include a bore for lubrication or fastening? No, this version is supplied without a bore and is sealed with an O‑ring, reducing fluid entry and chip retention compared with bored designs. What are the critical dimensions to check during inspection? Key measurements to verify are d1 28 mm, d2 21 mm, d3 25 mm, L1 74 mm, L2 34 mm; these ensure correct seating and thread engagement for M24 clamping. How is the item packaged and identified for reorder? The part is supplied as a single unit (packaging unit: 1) and is identified by SKU 2000832711NW, which should be quoted when reordering the TECWERK pull stud. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
80mm Machine Mounting Foot M12 x 1.25 x 120, Zinc-Plated, 41mm Height - TECWERK
Benefit from a secure machine stand and effective vibration isolation with the zinc-plated machine foot Size 1 ALBRECHT; its M12 x 1.25 x 120 mm threaded stud and 41 mm overall height ensure straightforward levelling and reliable load support — order via Metav Werkzeuge or consult our specialists for precise selection. Machine foot Size 1 ALBRECHT (TECWERK) – Zinc-plated, Ø 80 mm A robust machine foot, Machine foot Size 1 ALBRECHT, designed to stabilise lathes, milling machines and saws while providing two-way vibration isolation and precise levelling. Zinc-plated finish for corrosion resistance Suitable for lathes, milling machines and saws Max static load 50–500 kg per foot Height incl. levelling plate 41 mm Secure support with measurable performance The machine foot delivers a stable base by combining a large contact diameter with a threaded stud for secure fastening. The Ø 80 mm base distributes forces and reduces point loads, while the M12 x 1.25 x 120 mm stud provides a standardised connection for most machine frames. For reliable selection, establish the machine weight and divide by the number of mounting points to determine the max static load required per foot; the range offered here is 50–500 kg, which covers many bench and shop-floor applications. This calculation ensures a rational, data-led decision and avoids underspecification. Precise levelling and quick adjustment on site Levelling is achieved through the integrated adjustment range: height incl. levelling plate 41 mm and a levelling adjustment of 18 mm. The adjustment thread is designed for secure setting and repeatable alignment, so precision equipment remains level even under dynamic conditions. Installation is completed by fastening the stud and adjusting the foot until the machine sits correctly; once set, the levelling plate locks the position. The straightforward mechanical design minimises maintenance and supports continuous production with predictable machine alignment. Durable finish and broad machine compatibility The zinc-plated surface protects the mount against corrosion in industrial environments and prolongs service life where exposure to humidity or light contaminants occurs. Designed for use with lathes, milling machines and saws, the mount isolates vibrations both from the machine to the surroundings and from external sources to the machine, improving measurement stability and machining accuracy. Where sensitivity to vibration is critical, this levelling foot offers a practical compromise between load capacity and damping, ensuring machines retain their positional accuracy over time. Contact Metav Werkzeuge in Emmerich for expert advice and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and order the TECWERK machine foot with SKU 4000832072NW Technical data Article number: 4000832072NW Product: Machine foot Size 1 ALBRECHT Brand: TECWERK Packaging unit: 1 Key dimensions & loads Height incl. levelling plate H: 41 mm Levelling adjustment N: 18 mm Base diameter Ø D: 80 mm Threaded stud G: M12 x 1.25 x 120 mm Max static load per foot: 50–500 kg Materials & compatibility Zinc-plated finish Suitable for lathes, milling machines, saws and similar machinery Provides two-way vibration isolation Gives machines a secure stand and repeatable levelling FAQ What load can a single machine foot support? The Machine foot Size 1 ALBRECHT (TECWERK, SKU 4000832072NW) is rated for a max static load of 50–500 kg per foot, depending on application and mounting. How is the levelling adjustment performed? Levelling is achieved by rotating the threaded stud and setting the levelling plate within the 18 mm adjustment range; final position is secured mechanically to maintain alignment. Is the finish suitable for workshop environments? Yes, the zinc-plated surface resists corrosion and is suitable for typical workshop conditions, extending the service life of the mounting. Which machines are compatible with this mount? Designed for use with lathes, milling machines and saws, the mount gives a stable base and vibration isolation for precision and general-purpose machines. How to calculate the required load capacity per foot? Determine the total machine weight and divide by the number of mounting points to find the required static load per foot; then select a mount within the 50–500 kg range provided. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 11 Collet Wrench For ER/ESX Collet Nuts, Hardened Special Steel - TECWERK
Take advantage of secure clamping for ER/ESX collet nuts, the compact mini design and the hardened special steel construction for consistent toolholding and reduced setup times; order or consult with Metav Werkzeuge for procurement and technical advice. Collet Wrench ER Mini No.250K — Compact tool for ER 11 collet nuts (TECWERK) The Collet Wrench ER Mini No.250K is a compact, workshop-ready key designed for the secure tightening of ER/ESX collet nuts in machine tool and toolroom environments. Secure clamping for ER/ESX collet nuts Compatible with ER 11 size Hardened special steel construction Compact mini design for tight spaces Consistent toolholding for reliable production The compact key delivers secure clamping for ER/ESX collet nuts in accordance with DIN 6499, which supports repeatable and dependable toolholding. By ensuring the collet nut is correctly tightened, the wrench helps to reduce runout and vibration during machining, which directly contributes to longer cutter life and more consistent part quality. For production environments where process stability matters, correct clamping reduces rework and machine downtime, improving overall throughput and operational reliability. Robust design that resists wear and corrosion Manufactured from special steel and finished in a blued finish (tempered brown tone), this compact key offers mechanical strength with surface protection against everyday workshop corrosion. The tempering adds toughness to the steel while the blued finish provides a layer of oxidation resistance, making the tool suitable for regular use at the bench or on the machine. The durable construction supports frequent tightening cycles without rapid wear, so maintenance intervals are extended and replacement costs are reduced. Compact form to speed up setups in confined spaces The mini format is intended for accessibility where a full-size spanner would be impractical. The reduced profile improves reach into densely packed toolholders and spindle noses, enabling quicker changeovers and safer handling in tight assemblies. As a simple, purpose-built tool, it integrates seamlessly into existing setup routines and supports faster, more ergonomic clamping operations—helping workshop teams to maintain pace with production demands while keeping operations safe and repeatable. Contact Metav Werkzeuge for tailored advice on fitting and delivery of the TECWERK Collet Wrench ER Mini No.250K from our Emmerich quality hub Technical Data Article number: 4000605373NW Designation: Collet Wrench ER Mini No.250K Product type: Collet wrench Core data Size: ER 11 SKU / UID: 4000605373NW Special features For secure tightening of collet nuts of the ER/ESX system according to DIN 6499 Made from special steel Blued finish (tempered brown tone) Mini/compact design for restricted spaces FAQ Is this wrench suitable for ER 11 collets? Yes. The Collet Wrench ER Mini No.250K is specified for ER 11 collet nuts and is compatible with the ER/ESX system. What material and finish does the tool have? The TECWERK key is manufactured from special steel and supplied with a blued finish (tempered brown tone) for enhanced surface protection. Does the tool comply with a recognised standard? The design is intended for use with collet nuts produced to DIN 6499, ensuring compatibility with standard ER/ESX toolholding systems. Is the mini key suitable for tight machine environments? Yes. The compact format of the key is designed for tight spaces, making it useful at the bench and in crowded spindle areas where full-size wrenches are impractical. How does the wrench support production reliability? By enabling secure, repeatable clamping of collet nuts, the tool helps to reduce runout and vibration, contributing to consistent part quality and longer tool life. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 16 Collet Spanner For ER/ESX Nuts, Hardened Zinc-Plated With Hanging Hole - TECWERK
Take advantage of a tool that combines secure clamping for ER/ESX nuts, hardened special steel construction and space-saving handling thanks to the integrated hanging hole; order directly via Metav Werkzeuge or consult our specialists for application advice. Collet spanner ER No.250 Gr. ER 16 AMF – Collet spanner for ER/ESX clamping nuts, hardened and zinc-plated (TECWERK) The Collet spanner ER No.250 Gr. ER 16 AMF is a workshop tool designed to tighten and loosen ER/ESX clamping nuts in toolholding systems, compatible with DIN 6499 specifications Secure clamping for ER/ESX nuts Conforms to DIN 6499 standards Special steel, hardened and zinc-plated Integrated hanging hole for storage Consistent clamping that reduces setup time A compact wrench engineered for repeatable results, the spanner delivers consistent clamping of ER/ESX nuts which reduces setup variability and minimises rework. The tool’s construction from special steel, combined with heat treatment, provides a stable contact surface that resists deformation under torque; this ensures that the ER 16 interface retains its dimensional accuracy over repeated cycles. For workshops aiming to keep production steady, this mechanical reliability translates into fewer stoppages and predictable tool performance. Robust finishing for long service life Finished with a zinc-plated surface after hardening, the device offers corrosion resistance suitable for typical shop environments without the need for extra maintenance. The hardened surface protects critical engagement faces against wear, so the spanner maintains fit and function with clamping nuts over time. The inclusion of an integrated hanging hole facilitates tidy storage at the bench or in a tool board, helping to keep the working area organised and tools within easy reach during frequent tool changes. Designed for compatibility and straightforward handling Made specifically for ER/ESX clamping nuts to the DIN 6499 specification, the tool prioritises fit and ergonomics. The simple geometry of the key ensures intuitive insertion and removal from the nut while providing the leverage necessary for secure tightening. This straightforward usability reduces handling errors and shortens the time needed for clamping operations, supporting efficient workflows in metalworking and precision toolholding applications. For buyers seeking tried-and-tested practicality, the focus is on reliable mechanical function rather than complex features. Contact Metav Werkzeuge for stock availability and application guidance on TECWERK collet spanners; our Emmerich-based team will advise on compatibility and delivery options by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4000832443NW SKU / UID: 4000832443NW Item designation: Collet spanner ER No.250 Gr. ER 16 AMF Facts Key size: ER 16 Packaging unit: 1 Special features For secure clamping of ER/ESX clamping nuts according to DIN 6499 Made from special steel Hardened and zinc-plated finish With hanging hole for easy storage FAQ What clamping systems is this spanner compatible with? The spanner is designed for ER/ESX clamping nuts and complies with the DIN 6499 specification; the Collet spanner ER No.250 Gr. ER 16 AMF fits the ER 16 size. Is the tool corrosion-resistant for workshop use? Yes, the hardened construction with a zinc-plated finish provides corrosion protection suitable for standard workshop environments. Can the spanner withstand repeated torque applications without deforming? The use of special steel and heat treatment gives the spanner high wear resistance, ensuring dimensional stability under repeated clamping cycles. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 32 Collet Wrench For ER/ESX Collet Nuts, Hardened Zinc Plated With Hanging Hole - TECWERK
Take advantage of the combination of secure clamping, durable hardened steel and practical storage to keep set-up times low and tool changeovers reliable; order the collet wrench directly via Metav Werkzeuge or ask our consultants if needed. Collet wrench ER No.250 (ER 32) — hardened, zinc-plated (TECWERK) A collet wrench ER No.250 (ER 32) for secure tightening of ER/ESX collet nuts to DIN 6499, designed for routine workshop and machine-tool use Secure clamping for ER/ESX collet nuts DIN 6499 Hardened special steel for long service life Zinc-plated surface for corrosion protection Integrated hanging hole for convenient storage Reliable clamping that stabilises machining results The design delivers secure clamping for ER/ESX collet nuts to the DIN 6499 standard, which reduces the risk of slippage during rotation and helps maintain concentricity. By ensuring a consistent interface between spindle and tooling, the wrench contributes to repeatable runout performance and longer tool life. For maintenance teams and production technicians, the tangible benefit is fewer re-runs and less time spent diagnosing toolholding issues, making set-ups more efficient and measurable. Built for endurance to cut maintenance and replacement cycles Made from hardened special steel and finished with a zinc-plated coating, the tool offers resistance to wear and surface corrosion that would otherwise shorten service intervals. The material choice supports sustained mechanical loads encountered in routine tightening; the result is a longer interval between replacements and a lower total cost of ownership for clamping accessories. In practical terms, this means less inventory churn and greater confidence in everyday workshop operations. Thoughtful details that speed up daily workflows Small features influence daily efficiency: the compact form factor suits tight tool cabinets and busy benches, while the integrated hanging hole allows immediate storage beside the machine for rapid access. The simple, robust design is compatible with standard ER 32 fittings and supports quick tool changes during production runs. For workshop supervisors and setup engineers, the benefit is clear — reduced downtime and a tidier, more repeatable working environment that supports steady throughput. Contact Metav Werkzeuge for tailored advice and reliable supply of the ER 32 collet wrench; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 4000832445NW Product name: Collet wrench ER No.250 (ER 32) Brand: TECWERK Facts Key size: ER 32 Packaging unit: 1 Special features For secure tightening of ER / ESX collet nuts to DIN 6499 Made from special steel Hardened and zinc-plated surface With hanging hole for storage FAQ Is this wrench compatible with all ER 32 collet systems? The collet wrench ER No.250 is specified for ER 32 collet nuts and designed to work with ER/ESX systems manufactured to DIN 6499 What material and finish does the tool have? The tool is made from hardened special steel and is zinc-plated to provide wear resistance and basic corrosion protection Will the wrench help reduce tool-holding issues such as slippage? By delivering consistent, standard-compliant tightening, the wrench improves secure clamping and helps reduce slippage and runout-related problems Can the wrench be kept near the machine for quick access? Yes — the integrated hanging hole allows practical storage at the bench or beside the spindle for faster tool changes What is the article number for ordering or inventory? The article number is 4000832445NW and the item is listed as a collet wrench ER No.250 (ER 32) by TECWERK Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 40 Collet Wrench For ER/ESX Nuts Hardened Zinc Plated With Hanging Hole - TECWERK
Take advantage of the combination of precise clamping, robust construction and practical workshop handling for reliable production processes; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Collet spanner ER No.250, size ER 40 – hardened, zinc-plated (TECWERK) The Collet spanner ER No.250 (ER 40) is a workshop tool for secure tightening of ER / ESX collet nuts to DIN 6499, designed for routine machining and maintenance tasks. Secure clamping for ER / ESX collet nuts Hardened special steel for long service life Zinc-plated finish and hanging hole for storage Precision clamping that protects toolholders and workpieces The wrench is engineered for secure clamping of ER 40 collet nuts in conformity with DIN 6499, which ensures consistent axial force transmission and repeatable holding performance. Where a collet nut joins the toolholder to the tool shank, correct tightening prevents slippage and run-out; the spanner's geometry is matched to this function. As a workshop implement, it supports process stability by reducing rework and machine downtime through reliable torque transfer during assembly and maintenance. Robust materials for daily workshop demands Manufactured from special steel that is hardened and zinc-plated, the key offers high wear resistance and basic corrosion protection suited to busy shop floors. Hardening increases resistance to deformation under load, while the zinc-plated surface reduces the risk of surface corrosion in humid environments. The resulting combination prolongs service life and keeps calibration intervals and unexpected tool replacement to a minimum, contributing to predictable operating costs and uninterrupted production rhythms. Practical design to speed up everyday handling The compact form and integrated hanging hole enable tidy storage close to machining stations, reducing search times and improving workflow ergonomics. Supplied as a single unit, the tool is ready for immediate use and simple to integrate into a set of hand tools or a tool trolley. Clear, maintenance-friendly surfaces mean occasional cleaning is sufficient to maintain functionality, which supports fast tool changes and a more efficient workshop routine. For procurement or technical advice on the TECWERK Collet spanner ER No.250, contact Metav Werkzeuge in Emmerich for personalised guidance and prompt supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832446NW Product: Collet spanner ER No.250 Brand: TECWERK Packing unit: 1 Facts Size: ER 40 Special features Secure clamping of ER / ESX collet nuts to DIN 6499 Made from hardened special steel Zinc-plated finish Hanging hole for workshop storage FAQ Is the spanner suitable for ER 40 collet nuts? Yes. The TECWERK Collet spanner ER No.250 is specifically sized for ER 40 and made for tightening ER / ESX collet nuts to DIN 6499 (Article number 4000832446NW). What is the tool made from and how durable is it? The spanner is manufactured from special steel, hardened for wear resistance and zinc-plated to provide basic corrosion protection, giving a durable service life in workshop conditions. How should the spanner be stored between uses? Use the integrated hanging hole to store the spanner on a pegboard or tool rail in a dry place; regular cleaning after use keeps the zinc-plated surface in good condition. Can this tool withstand frequent industrial use? The combination of hardened material and robust finish makes the spanner suitable for regular workshop and light industrial environments where reliable clamping of collet nuts is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
HSK-A63 Tool Holder For Assembly System, Compatible With Montage System - TECWERK
Take advantage of a standardised HSK interface and proven compatibility with TECWERK mounting systems to streamline fixture setup and reduce interchange time. The HSK-A63 holder connects directly with the referenced mounting system (Art.-No. 2000832115) and is supplied as a single unit; order via Metav Werkzeuge or consult the Metav team for configuration advice. HSK-A63 holder for mounting system — TECWERK mounting-system adapter HSK-A63 holder for secure integration with TECWERK mounting systems, designed to accept standard HSK-A63 tool interfaces in fixture assemblies HSK-A63 interface compatibility Compatible with mounting system Art.-No. 2000832115 Single-piece packaging for immediate use Secure, standardised interface for precise tool retention The HSK-A63 holder implements a widely accepted spindle interface that supports consistent seating and repeatability when combined with a compatible fixture. By using a standardised connection, the holder reduces alignment variation during assembly changes and simplifies tool inventory management. This results in fewer changeover errors and predictable positioning, which benefits production lines where consistent tool location is essential for downstream accuracy. Seamless integration to cut setup time in mounting arrangements Designed for installation with the specified mounting system (Art.-No. 2000832115), the adapter enables direct interface mating without additional adapters or complex modifications. The compatibility with the TECWERK mounting arrangement supports faster changeovers and a simplified mechanical stack-up, leading to measurable time savings during maintenance and tool replacement. The practical outcome is improved machine uptime and less non-productive time at the workstation. Clear procurement and minimal logistics disruption Supplied as a single packaging unit, the holder fits straightforward procurement and stocking strategies. Metav’s role as distributor provides a reliable supply channel and an experienced quality filter for the European market; this helps ensure the component received matches the expected specification and is ready for immediate deployment. For production planners, that means fewer surprises on delivery and a direct route to the correct mounting interface. For reliable HSK-A63 mounting solutions from TECWERK, contact Metav Werkzeuge for product matching and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832118NW Article name: HSK-A63 holder for mounting system (TECWERK) Brand: TECWERK Product type: Holder for mounting system Compatible with: mounting system Art.-No. 2000832115 Packaging unit: 1 Core Data Packaging unit: 1 Compatible mounting system Art.-No.: 2000832115 Interface: HSK-A63 Special features Standardised HSK-A63 interface Integration for mounting system assemblies Brand: TECWERK FAQ What does the HSK-A63 holder fit? The HSK-A63 holder (TECWERK, SKU 2000832118NW) is intended for mating with HSK-A63 tool interfaces and integration into the referenced mounting system Art.-No. 2000832115. Is the holder compatible with standard HSK-A63 tooling? Compatibility is based on the HSK-A63 standard; the holder from TECWERK accommodates standard HSK-A63 toolholders when used in the correct mounting arrangement. How is the product supplied? The item is supplied as a single unit (packaging unit 1) under article number 2000832118NW. Can the holder be used with other mounting systems? The holder is designed for the TECWERK mounting system specified; use with other systems requires verification of mechanical fit and interface compatibility. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
SK40 Pull Stud with M16 Thread, ISO 7388-3 Form AF, 17mm Bore - TECWERK
Take advantage of the proven combination of ISO 7388 / II Form B compliance, SK40 taper fit and an M16 threaded interface to secure reliable drawbar engagement and repeatable tool retention. Order the TECWERK pull stud directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK pull stud — ISO 7388/II Form B, SK40 with bore (M16) The TECWERK pull stud ISO 7388/II Form B is a precision retention component for SK40 spindle systems, engineered to ensure consistent drawbar clamping in CNC and machining-centre applications. ISO 7388 / II Form B standard compatibility SK40 taper for reliable spindle fit M16 thread for positive drawbar connection Central bore for drawbar/coolant access Consistent clamping through standard conformity Compliance with ISO 7388 / II and the Form B geometry guarantees interchangeability with other standard retention systems and supports reproducible clamping forces. The standardised interface reduces uncertainty at tool change, so toolholding performance is predictable and can be integrated into production planning. With the SK40 taper and M16 thread specified, the component is suited to established spindle toolholders, enabling simplified spare-part management and shorter downtimes. Secure drawbar engagement and straightforward functionality The retention stud features a central bore that permits unobstructed drawbar engagement and may be used in systems where internal coolant or lubrication paths are required. The stud’s geometry — including d1: 18.95 mm, d2: 12.95 mm and d3: 17 mm — is designed to interface precisely with mating drawbar mechanisms, so axial retention and torque transmission are maintained during heavy machining tasks. This technical layout supports stable tool retention, which is vital for repeatable machining accuracy. Precise dimensions for repeatable accuracy Key dimensions such as L1: 44.5 mm and L2: 16.4 mm define the effective length and engagement depth, helping to control stick-out and tool projection consistently across setups. The clear numerical specifications allow planners and engineers to verify compatibility with existing holders and spindles before purchase. By basing decisions on measurable values rather than estimates, workflow reliability is improved and setup variation is minimised. Practical integration into workshop workflows The compact design and standardised threading ensure this retention stud slots into conventional SK40 toolholding systems with minimal modification. As a delivery-ready industrial part, it supports inventory rationalisation for production and maintenance departments, reducing the variety of special components required. For further compatibility checks or to confirm suitability for specific machining operations, technical guidance is available from Metav Werkzeuge and its distribution channels. For procurement or technical confirmation of the TECWERK pull stud (SKU 2000832720NW) contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to secure fast supply from central stock. Technical data Article number: 2000832720NW Label: Anzugsbolzen ISO 7388/IIB SK40 m.Bohr.TECWERK Manufacturer: TECWERK Norm: ISO 7388/II Core specifications Thread: M16 Taper: SK40 d1: 18.95 mm d2: 12.95 mm d3: 17 mm d4: 7.35 mm L1: 44.5 mm L2: 16.4 mm Special features Form: B With central bore Packaging unit: 1 FAQ Which standard does this pull stud conform to? The TECWERK pull stud is manufactured to ISO 7388 / II Form B and is intended for use where that standard is specified, reference SKU 2000832720NW. Is the retention stud compatible with SK40 spindles? Yes — the component is specified for SK40 taper interfaces and uses an M16 thread for drawbar engagement, suitable for standard SK40 toolholding systems. What is the purpose of the central bore in this design? The central bore enables secure drawbar engagement and can allow internal coolant or lubrication routing where the machine’s spindle and toolholder design provide such functionality. What are the critical dimensions to check for compatibility? Key dimensions to verify are d1: 18.95 mm, d2: 12.95 mm, L1: 44.5 mm and L2: 16.4 mm; these define the engagement geometry of the TECWERK pull stud (SKU 2000832720NW). Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com