Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
1.75mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, ±0.001 mm tolerance and a compact 50 mm length for reproducible end‑measure checks; order the item from Metav Werkzeuge or consult our specialists for application guidance. Gauge pin M323.175 – single test pin, 1.75 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The Gauge pin M323.175 is a workshop‑grade single test pin intended for precise end‑measurement and reference checks in machining and assembly environments. Workshop‑grade construction Tolerance ±0.001 mm Diameter 1.75 mm Length 50 mm Micrometre precision for inspection and gauging Manufactured for tasks that demand high repeatability, this gauge pin delivers a nominal tolerance of ±0.001 mm (1 µm), which places it in the realm of fine verification and end‑dimension control. The tight tolerance reduces ambiguity in pass/fail assessments on small bores and precision fittings, enabling quicker decisions on in‑process checks. Where measurements must be both reliable and traceable, the narrow tolerance provides a clear, objective basis for quality documentation. Compact design that suits workshop workflows With a diameter of 1.75 mm and a length of 50 mm, the component is designed for easy handling and quick insertion into small assemblies or gauges. The item is specified as a workshop version, offering a pragmatic balance between precision and everyday robustness. Constructed from special steel, the pin maintains dimensional stability under regular use and resists surface wear common in busy inspection benches, which supports consistent measurement results over repeated cycles. Practical integration into quality routines The slim form factor and fine accuracy make this test pin ideal as a reference element in fixture set‑ups, end‑measure controls and comparative checks during production runs. Lightweight and compact, it is straightforward to store in tool cabinets or measurement sets and to incorporate into existing inspection jigs. Supplied as a single unit, the pin suits operations that require selective replacement or the addition of targeted reference points without overhauling established metrology equipment. Contact Metav Werkzeuge for application advice on the M323.175 gauge pin and to arrange fast supply from Emmerich — our consultants help match the right precision element to each inspection task Technical data Article number: M323.175 GTIN: 4061905054730 Brand: Metav IndustryLine Facts Diameter: 1.75 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Version: Workshop‑grade Single test pin for end‑measure checks FAQ What level of precision does this test pin provide? The gauge pin M323.175 from Metav IndustryLine delivers a tolerance of ±0.001 mm, offering micrometre‑level precision suitable for fine inspection work. For which applications is the M323.175 recommended? This single test pin is intended for end‑measurement and reference checks in machining, assembly and small‑bore verification tasks where tight dimensional control is required. What is the material of the pin and why does it matter? The component is made from special steel, chosen for its dimensional stability and wear characteristics that support repeated inspection use. Is the M323.175 supplied as a set or individually? The product is supplied as a single test pin (individual item) to enable selective use within existing inspection kits or fixtures. Can this pin be used in fixture setups and jigs? Yes, the compact diameter and 50 mm length make it well suited for incorporation into precision fixtures, gauge assemblies and comparative measurement set‑ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.76mm Gauge Pin, ±0.001mm Precision, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of a 1.76 mm diameter with an ultra‑tight ±0.001 mm tolerance and a 50 mm overall length for repeatable end‑measure checks; the workshop‑grade construction and delivery in a protective case protect the pin during transport and storage. Order the M323.176 directly via Metav Werkzeuge or contact the consultants for application advice. M323.176 gauge pin, 1.76 mm ±0.001 mm, 50 mm (Metav IndustryLine) The M323.176 gauge pin is a workshop‑grade inspection pin designed for precise end‑measure and locating checks in compact metrology routines. Precision diameter 1.76 mm Tight tolerance ±0.001 mm Length 50 mm workshop version Special steel with protective case Consistent measurement precision for repeatable checks The gauge pin delivers an exceptionally tight tolerance of ±0.001 mm, providing the dimensional certainty required in high‑accuracy inspection tasks. This level of precision reduces retesting and rejects by ensuring that a go/no‑go or reference measurement is stable across repeated operations. The small diameter and rigid construction make the pin especially suitable for tight bores, small locating holes and precision fixture alignment. By translating the pin's dimensional stability into fewer downstream corrections, production flow benefits from predictable quality control results. Compact design tailored to micro metrology applications Classified in the micro range (measurement range up to 10–100 mm), this inspection pin is engineered for finework where space and stiffness matter. The combination of a 50 mm shaft and a nominal diameter of 1.76 mm means the component is easy to manoeuvre into confined features while retaining the straightness needed for accurate end‑gauging. The special steel construction balances wear resistance with manufacturing tolerances, so the element remains serviceable for routine shop use. Delivery in a protective case helps prevent contamination and mechanical damage during storage and transport. Integrates into inspection and gauge setups with minimal effort As a single, workshop‑grade gauge pin, the component is intended for straightforward integration into existing gauge blocks, pin jigs and fixture sets. Its compact form factor simplifies handling and rapid substitution during inspection cycles, supporting efficient quality control without complex adaptation. For tasks that require exact reference lengths or pinpoint locating, the pin functions as a stable datum that shortens set‑up time and increases throughput. Clear, reproducible reference points contribute directly to reduced cycle time and improved process capability. For workshop inspection needs, contact Metav Werkzeuge for technical guidance and ordering of the M323.176 gauge pin — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.176 GTIN: 4061905054747 Weight: 0.004 kg Material: Special steel Length: 50 mm Facts Diameter: 1.76 mm Accuracy: ±0.001 mm Category: Gauge pins / Test pins Special features Workshop version Delivered in protective case Suitable for compact bore and locating checks FAQ What diameter and tolerance does this gauge pin offer? The M323.176 gauge pin is specified with a diameter of 1.76 mm and an accuracy of ±0.001 mm. Is the pin suitable for fine bore inspection and fixture locating? Yes; its small diameter and rigid 50 mm length make the pin ideal for compact bore gauging and precise locating tasks in workshop environments. What material is the pin made from and how does that affect wear? The pin is manufactured from special steel, chosen to provide a balance of hardness and wear resistance appropriate for routine inspection use. Does the delivery include protective transport packaging? The pin is supplied in a protective case to safeguard the component during transport and storage. Can this gauge pin be used with standard pin jig and gauge block systems? Yes; the pin’s dimensions and workshop specification allow straightforward integration with common gauge block and pin jig setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.77mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
High-precision workshop gauge pin with ±0.001 mm tolerance and a compact 1.77 mm diameter for reliable end-measure checks; the 50 mm length provides secure seating and reach in confined assemblies. Robust special steel construction supports repeatable inspections and stable handling. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single 1.77 mm — ±0.001 mm accuracy (Metav IndustryLine) The gauge pin is a workshop-grade test pin intended for precise dimensional checks and end-measure applications in assembly and inspection tasks Workshop-grade construction Tolerance ±0.001 mm Diameter 1.77 mm Length 50 mm for deep access Achieve repeatable results with micron-level tolerance The compact test pin delivers a certified ±0.001 mm tolerance, offering inspection accuracy at the micron scale for small bores, fit checks and reference tooling. This level of control reduces measurement scatter and supports traceable process checks in production and QA environments. By combining tight specification with a simple single-pin design, the component facilitates fast go/no-go and comparative checks while preserving measurement integrity and repeatability. Built for workshop conditions and secure handling Designed as a workshop-grade tool, the pin uses special steel to balance toughness and dimensional stability during routine use. The 50 mm length allows access to recessed seats and provides a convenient grip for manual handling or fixture mounting. At a slender 1.77 mm diameter the pin is ideal where space is limited but reliable seating is required; its form factor makes it suitable for insertion gauges, pin arrays and alignment jigs where consistent contact geometry matters. Integrates into inspection workflows and end-measure applications As a single precision test pin intended for end measures, the component fits naturally into established inspection routines — for example, insertion into bore gauges, use as a reference master or in fixture set-up. Labelling and traceability are supported by the supplied SKU and GTIN, enabling inventory control and clear documentation within quality systems. The simple geometry minimises interpretation effort during inspections and allows quick comparison against tolerance thresholds. Practical advantages for production and maintenance The minimal design reduces maintenance overhead: when storage and handling are controlled, the pin retains its performance over long service intervals. Its compact mass and standard dimensions simplify integration into existing tool kits and make replacement straightforward. The workshop specification emphasises robustness without sacrificing precision, helping to ensure consistent component checks across shifts and operators. Choose Metav IndustryLine gauge pins for dependable inspection performance and contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.177 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 1,77mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 1.77 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Special features Workshop version Material: Special steel Single test/gauge pin GTIN: 4061905054754 FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.177 is specified to ±0.001 mm, providing micron-level control for precise inspection tasks. Is this pin suitable for end-measure applications? Yes, the pin is intended for end-measure (endmasse) checks and is practical for insertion into small bores or seating in fixtures. What material is the pin made from? The pin is manufactured from special steel, selected to combine dimensional stability with workshop durability. Can this pin be used in assembly fixtures and jigs? The compact geometry and 50 mm length make the pin suitable for fixture mounting, alignment jigs and pin arrays used in production setups. How is the product identified for ordering and traceability? The SKU M323.177 and GTIN 4061905054754 identify this single gauge pin for procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.78mm Gauge Pin ±0.001 mm Length 50 mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of ±0.001 mm dimensional accuracy, a compact 1.78 mm diameter and a durable 50 mm length for repeatable end‑measurement and alignment tasks; delivered ready for transport in a protective case. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.178 — 1.78 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.178 is a workshop‑grade inspection pin designed for precise end‑measurements, fit checks and alignment tasks in assembly and quality control environments. Diameter 1.78 mm, tolerance ±0.001 mm Length 50 mm for deep bores Special‑steel construction Delivered in protective case Reduce rework with micrometric repeatability The exceptionally tight ±0.001 mm tolerance (1 µm) of this inspection pin ensures measurable reductions in dimensional uncertainty during routine checks. Accuracy at this level converts directly into fewer rejected parts and less rework, because a reliably calibrated reference pin gives a clear go/no‑go condition for small bore diameters. The compact diameter is ideal where space is limited yet precision remains essential; the hardened shaft maintains roundness under repeated insertion, supporting consistent results across inspection cycles. Bold, verifiable tolerances make specification and documentation straightforward for quality records. Built for workshop handling and durability Constructed from special steel, this workshop‑grade test pin balances wear resistance with the dimensionally stable finish necessary for repeated gauging. The 50 mm shank provides sufficient engagement in moderate‑depth bores while keeping the tool easy to manoeuvre by hand or with light fixtures. Supplied in a protective case, the pin is protected from transport damage and contamination, preserving the measuring surface and minimising downtime for cleaning or dressing. The simple geometry of the pin also facilitates fast visual inspection for wear before use, helping to maintain inspection integrity over time. Practical use in inspection and assembly workflows This small‑diameter gauge is intended for end‑measurement, alignment verification and fit checks in component assembly and precision cleaning processes. The smooth, calibrated shaft functions as a reliable reference for gauging internal diameters, for locating features during assembly and for checking concentricity in small parts. Lightweight and compact, the pin integrates easily into quality control benches and fixture setups; traceable identification (SKU M323.178) simplifies inventory and audit processes. For operations that prioritise stable short‑range measurements, this inspection pin provides a pragmatic balance of precision and handling efficiency. For procurement or technical application support related to the Metav IndustryLine gauge pin, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for purchase and specification guidance. Technical data Article number: M323.178 (SKU) GTIN: 4061905054761 Brand: Metav IndustryLine Material: Special steel Tolerance: ±0.001 mm Diameter: 1.78 mm Length: 50 mm Weight: 0.004 kg Facts Tolerance in micrometres: 1 µm Length in millimetres: 50 mm Diameter in millimetres: 1.78 mm Weight in kilograms: 0.004 kg Special features Workshop version Supplied in protective case for transport Compact diameter for confined bores Smooth, hardened measuring surface FAQ What tolerances does the gauge pin meet and how precise is it? The gauge pin M323.178 is specified to ±0.001 mm (1 µm), providing micrometric accuracy suitable for precise end‑measurement and fit verification. Which materials is the pin made from and how does that affect wear? The pin is manufactured from special steel, offering a hard, wear‑resistant surface that maintains dimensional stability under repeated use. Is the pin delivered ready for transport and storage? Yes, the inspection pin is supplied in a protective case, which protects the measuring surface during transport and storage. For which tasks is this small‑diameter pin particularly suitable? This compact gauge is ideal for end‑measurement, bore checks, alignment and fit verification in small components and assembly processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.79mm Test Pin ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Benefit from micron‑level repeatability, workshop‑grade construction and compact geometry for reliable end‑measurements in inspection and set‑up tasks. The combination of 1.79 mm nominal diameter, ±0.001 mm accuracy and a 50 mm length supports consistent results and efficient quality checks; order the gauge pin directly via Metav Werkzeuge or request specialist advice from our consultants. Gauge pin M323.179 — 1.79 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.179 designed for precision end‑measurements and workshop inspection, ideal for small‑bore checks and reference measurements 1.79 mm nominal diameter ±0.001 mm tolerance 50 mm hardened workshop length Special‑steel construction for wear resistance Supplied in protective transport case High‑precision measurement for dependable process control The gauge pin delivers ±0.001 mm tolerance, equating to a 1‑micrometre resolution that significantly reduces uncertainty in go/no‑go checks and reference comparisons. This level of accuracy supports reproducible set‑ups and shortens inspection cycles, which in turn improves throughput and reduces scrap rates. The metric nominal size of 1.79 mm is well suited to fine‑bore verification and end‑measure references in precision workshops. Durable workshop design for frequent handling Manufactured in special steel and offered in a workshop version, the pin resists everyday wear while keeping true to its nominal dimension. The 50 mm length provides a practical balance between reach and rigidity, making the component stable in measuring stands or handheld checks. Supplied in a protective transport case, the pin arrives ready for immediate use and is protected against impact and contamination during storage and transport. Practical benefits and application clarity Compact geometry and tight tolerance make the pin appropriate as a master reference for small diameters, for setting gauges or verifying bore sizes on jigs and fixtures. The low mass and short length reduce the risk of deflection, ensuring repeatability in serial checks. The robust finish facilitates easy cleaning and maintenance, extending service life and maintaining measurement integrity over many cycles. Choose the Metav IndustryLine M323.179 for precise end‑measurement tasks and contact Metav Werkzeuge for delivery from Emmerich or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.179 GTIN: 4061905054778 Manufacturer: Metav IndustryLine Material: Spezial‑Stahl Nominal diameter: 1.79 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.004 kg Facts Diameter: 1.79 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Workshop version Supplied in protective transport case Application: end measurements FAQ What is the intended application for this gauge pin? The gauge pin M323.179 from Metav IndustryLine is intended for precision end‑measurements, small‑bore verification and use as a reference pin in workshop inspection and set‑up tasks. How tight is the tolerance and what does it mean for inspections? With a tolerance of ±0.001 mm, the M323.179 provides micrometre‑level repeatability, enabling reliable go/no‑go checks and reference comparisons in quality control. Is the pin suitable for frequent workshop use? Yes. The workshop version is made from special steel and designed for wear resistance and regular handling during serial inspection tasks. Does the product arrive ready for storage and transport? The gauge pin is supplied in a protective transport case to shield the component from impact and contamination during handling and storage. Can this pin be used as a master reference for gauge setting? The dimensional stability and 1‑micrometre tolerance make the M323.179 appropriate as a master reference for setting small‑diameter gauges and verifying fixture bores. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.7mm Test Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometric accuracy, a robust workshop design, and compact dimensions for clear end‑measurement decisions in production and inspection. Benefit from a precisely manufactured gauge pin with a 1.70 mm diameter, ±0.001 mm tolerance and 50 mm length—order directly via Metav Werkzeuge or consult our specialists for integration advice. M323.170 test pin — gauge pin, 1.70 mm Ø, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.170 test pin is a single, workshop‑grade gauge pin designed for precise end‑measure checks and fine inspection tasks in toolmaking and series production. ±0.001 mm micrometre tolerance Ø 1.70 mm hardened special steel 50 mm overall length for accessible checks Micrometric accuracy for decisive end‑measurement The ±0.001 mm tolerance positions this gauge pin in the high‑precision range suitable for critical go/no‑go checks and dimensional verification of small features. Such a fine tolerance reduces ambiguity in pass/fail decisions during incoming inspection or final quality control, improving throughput by cutting retesting and rework. The diameter of 1.70 mm and the single‑piece configuration provide a stable reference for bore checks and plug‑gauge applications; the result is repeatable measurements that feed reliable data into process control procedures. Robust, workshop‑ready construction that lasts Produced in special steel and labelled as a workshop edition, the pin is engineered to withstand routine handling and the contact stresses typical of shop environments. The 50 mm overall length gives access into deeper features without sacrificing axial stiffness, while the compact diameter supports measurements in narrow bores and delicate fixtures. The combination of material choice and workshop specification ensures wear resistance and dimensional stability across many cycles, which preserves calibration intervals and supports long‑term reproducibility. Designed to integrate with inspection workflows As a compact gauge pin, this item fits into standard test benches, fixture blocks and comparator setups where precise end‑measure dimensions are required. Marked and traceable via the provided identifiers, the component simplifies inventory control and replacement planning. The product is appropriate for metrology labs, jigs and fixture maintenance, and quality gates on the production line; it serves well where a definitive, high‑resolution reference is needed for small feature assessment. For reliable, workshop‑grade micron verification choose the Metav IndustryLine M323.170 from Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for specific integration guidance. Technical data Article number: M323.170 GTIN: 4061905055843 Manufacturer: Metav IndustryLine SKU: M323.170 Facts Diameter: 1.70 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Accuracy specification: ±0.001 Special features Material: special steel Version: workshop edition Category: gauge pin / test pin Intended use: end‑measurement / plug‑gauge applications FAQ What applications suit this gauge pin best? This test pin is intended for end‑measurement tasks such as bore checks, plug‑gauge checks and fixture verifications; the M323.170 from Metav IndustryLine is particularly suited to small‑feature inspections. Is the dimensional tolerance of ±0.001 mm achievable in routine shop use? When used in a stable fixture and handled consistently, the ±0.001 mm tolerance of the M323.170 delivers reproducible results that support reliable pass/fail decisions. Which materials can be inspected with this pin? The gauge pin itself is made of special steel and is suitable as a reference for inspecting components of common engineering materials; selection of mating materials should follow standard practice to avoid undue wear. Can the pin be used in automated measurement rigs? Yes, the compact form and defined geometry of the M323.170 make it compatible with automatic fixtures and test benches for inline or near‑line verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.81mm Gauge Pin, ±0.001mm Tolerance, 50mm Length, Workshop Version In Plastic Case - Metav IndustryLine
Benefit from the combination of workshop‑grade robustness, sub‑micron accuracy (±0.001 mm) and a compact 50 mm length for reliable end‑measurements; order the pin directly via Metav Werkzeuge or contact our consultants for technical advice. Test pin M323.181 – single 1.81 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A Test pin for precise end‑measurement and inspection in workshop metrology, designed as a resilient workshop version for routine gauging tasks Workshop‑grade design for daily use Diameter 1.81 mm with ±0.001 mm accuracy 50 mm hardened special steel shaft Supplied in transport box for safe handling Reduce rework through measurable precision The M323.181 provides ±0.001 mm tolerance (equivalent to 1 μm) on a slender 1.81 mm diameter shaft, reducing measurement uncertainty in tight fits and fine bores. Such sub‑micron accuracy turns subjective checks into objective results, which speeds up root‑cause analysis and cuts reject rates. The narrow diameter and short 50 mm overall length support repeatable contact with minimal deflection, making the pin suitable for end‑of‑line verification and precision gauging in small assemblies. Designed for busy workshop conditions Built as a workshop‑grade tool, the pin balances hardness and toughness by using special steel, offering resistance to wear during frequent use. The robust finish and compact form factor make handling straightforward on the shop floor while preserving the measured tolerance. Supplied in a transport box, the component arrives protected for transfer between workstations or storage, reducing the risk of nicks that would affect accuracy. Practical integration into inspection workflows The pin suits use as a reference probe for fixture checks, pin‑gauge complements and end‑measurement routines where a defined cylindrical datum is required. Lightweight at approximately 0.004 kg, the test pin is easy to mount in holders or gauge sets without imposing additional inertia. Clear identification with the M323.181 code and GTIN ensures traceability in tool cabinets and inspection reports, supporting organised quality documentation and batch tracking. Choose the Metav IndustryLine M323.181 test pin for reliable sub‑micron inspection and contact Metav Werkzeuge in Emmerich for ordering and application guidance Technical data Article number: M323.181 GTIN: 4061905054792 Label: Test pin, single, 1.81 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 1.81 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Materials & special features Material: Special steel Version: Workshop execution Packaging: Supplied in transport box SKU: M323.181 FAQ What is the dimensional tolerance of this test pin? The M323.181 test pin offers a tolerance of ±0.001 mm (1 μm), suitable for high‑precision gauging and fine bore verification. Which material is used for the pin and what does that mean for wear? The pin is made from special steel; this provides a balance of hardness and toughness for durable performance in workshop environments. How is the test pin supplied for transport and storage? The pin is supplied in a transport box to protect the shaft during handling and transfer between workstations. Can this pin be used in fixture checks and gauging sets? Yes; the compact 50 mm length and precise diameter make it suitable for fixture alignment, pin‑gauge complements and end‑measurement applications. How is the product identified for inventory and traceability? Identification is via the SKU M323.181 and GTIN 4061905054792, which supports clear traceability in inspection records and stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.82mm Gauge Pin ±0.001mm Length 50mm Workshop Version in Special Steel - Metav IndustryLine
Take advantage of the combination of extreme measurement accuracy, compact dimensions and a workshop-grade design for reliable end-measure verification; order the test pin directly via Metav Werkzeuge or ask the consultants if needed. M323.182 Test Pin — 1.82 mm diameter, ±0.001 mm accuracy (50 mm length, Metav IndustryLine) The M323.182 Test Pin is a workshop-grade inspection pin intended for precise end-measure verification and fixture checking in gauges and control equipment. Workshop-grade construction Accuracy ±0.001 mm Diameter 1.82 mm for fine inspection Length 50 mm, special steel Precision engineered for repeatable measurement The M323.182 test pin is specified for an accuracy of ±0.001 mm, a tolerance class that supports high-precision comparison tasks and tight go/no-go verifications. The 1.82 mm nominal diameter and 50 mm overall length make this probe suitable for confined inspection points and for use as an end measure in small gauges. In practical terms, the sub-millimetre tolerance reduces measurement uncertainty when used as a reference element in comparative checks, enabling consistent pass/fail decisions in small-part production and quality control. Robust workshop build for frequent handling Manufactured in special steel, the probe offers a balance of wear resistance and dimensional stability appropriate for everyday shop use. The component’s low mass (approx. 4 g) contributes to easy handling and fast fixture changes without compromising stiffness for short-span measurements. The workshop-grade execution emphasises practical durability and repeatability under regular contact inspection routines, making the pin a dependable element for production metrology and fixture-based controls. Designed for seamless integration into inspection setups The slim profile and tight tolerance of this inspection pin simplify incorporation into plug gauges, pin gauges and bespoke checking fixtures where accurate end dimensions are required. As a single-pin item, the component can serve as a calibrated reference in comparative arrangements or as a replacement element in modular gauge systems. The clear technical specification—±0.001 mm, 1.82 mm diameter, 50 mm length—permits straightforward planning for traceable workflows and supports quality protocols that depend on repeatable mechanical references. For tailored advice, availability and to arrange procurement through Metav Werkzeuge, please reach out to our specialists at Metav Werkzeuge for precise ordering and application guidance. Technical Data Article number: M323.182 GTIN: 4061905054808 Brand: Metav IndustryLine Facts Diameter: 1.82 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Version: workshop-grade execution Category: Test pins FAQ What tolerance does this test pin offer? The M323.182 test pin is specified with an accuracy of ±0.001 mm, suitable for high-precision comparative checks and tight inspection limits. For which inspection tasks is this probe suitable? Its 1.82 mm diameter and 50 mm length make the probe suitable for end-measure verification, plug-gauge inserts and confined measurement points in small-part production. Is the supply status regarding calibration stated for this item? The product listing for the M323.182 test pin does not specify whether a calibration certificate is supplied with the standard item. What material is used for the probe? This inspection pin is made from special steel, selected for its balance of wear resistance and dimensional stability in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.83mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of laboratory-level tolerance and workshop-hardened construction for reliable gauge work and repeatable inspections. The built-in accuracy of ±0.001 mm together with a 1.83 mm diameter shaft and a 50 mm length ensures consistent end‑measure performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.183 — Precision test pin, 1.83 mm, ±0.001 mm (Metav IndustryLine) The Test pin M323.183 is a workshop-grade precision probe designed for end‑master measurement, gauge inspection and fixture checking in manufacturing and inspection environments. Precision tolerance ±0.001 mm Diameter 1.83 mm for fine probing 50 mm hardened special-steel shaft Supplied in protective transport case Repeatable, measurable precision for routine inspection The probe is engineered for repeatability in routine gauging tasks: with a verified tolerance of ±0.001 mm, the pin delivers measurement stability that bridges handheld checks and bench inspection. The small 1.83 mm shaft is ideal for narrow bore verification and contact points where minimal intrusion is required. Because the manufacturing tolerance is specified to the micrometre level, the pin serves as a reliable reference in serial checks and gauge sets, reducing rework and supporting consistent quality control procedures. Built for the workshop — durability meets fine accuracy Combining a special steel shaft with a workshop specification, this test pin stands up to the mechanical demands of daily use. The 50 mm length provides sufficient reach for many fixturing scenarios while keeping the probe stiff to avoid bending errors. A protective transport case is supplied to safeguard the probe between uses, preserving the ground tip and the calibrated geometry. The result is a tool that balances robustness and precision, suitable for inspectors and machinists who require dependable performance on the shop floor. Simple integration into inspection routines The slender form factor and standard dimensions make the pin straightforward to incorporate into existing plug gauges, inspection jigs and pin assemblies. As a single, calibrated probe it can be used as a substitute for worn elements in gauge blocks or as a repeatable touchpoint in comparative testing rigs. Traceability is supported through clear labelling and part identification, facilitating record keeping in quality systems and production logs. Practical benefits and operational confidence Using a high‑tolerance probe reduces measurement uncertainty at critical contact locations and shortens diagnostic cycles when troubleshooting tooling or assembly fit. The workshop version construction means less downtime due to wear, and the transport case reduces handling damage during storage or transit. For operations that value consistent pass/fail decisions, this pin offers a compelling mix of accuracy and operational resilience. For precise gauge work choose the Metav IndustryLine test pin and contact Metav Werkzeuge in Emmerich for availability and application guidance — reliable stock and expert advice from Metav Werkzeuge are ready to assist. Technical data Article number: M323.183 SKU: M323.183 GTIN: 4061905054815 Label: Test pin, single, 1.83 mm, ±0.001 mm, length 50 mm Core specifications Diameter: 1.83 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Version: Workshop version Delivery: Supplied in transport case Category: Measuring pins Accuracy class: ±0.001 FAQ What is the intended use for this test pin? The test pin M323.183 (Metav IndustryLine) is intended for end‑measure checks, gauge inspection and fixture contact points where a slim, high‑accuracy probe is required. Is the pin suitable for repeated workshop use? Yes, the workshop version is manufactured from special steel and is supplied in a protective transport case to withstand regular handling and preserve geometry. What tolerance can be expected from the probe? The probe is specified to an accuracy of ±0.001 mm, making it suitable for high‑precision inspection tasks and repeatable shop measurements. Can the pin be used in plug gauges and jigs? The 1.83 mm diameter and 50 mm length are compatible with common pin holders and inspection jigs; the pin is suitable for direct integration into such fixtures. Which SKU identifies this product for ordering? Order reference: M323.183 (Test pin, Metav IndustryLine) Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.84mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Ensure reproducible reference measurements with a compact, high‑accuracy gauge pin: 1.84 mm diameter with a tolerance of ±0.001 mm and a 50 mm shank for stable end‑measurement. Order this precision gauge pin directly via Metav Werkzeuge or ask the consultants for specification support. Precision Gauge Pin M323.184 — single test pin, 1.84 mm diameter, ±0.001 mm (Metav IndustryLine) the Precision Gauge Pin M323.184 is a workshop‑grade reference pin designed for high‑precision bore and end‑measurement tasks in small components and inspection fixtures Workshop‑grade precision tolerance ±0.001 mm Diameter 1.84 mm for fine bore checks 50 mm hardened special‑steel shank Compact single‑pin format for reference checks Stable reference for tight tolerance checks The compact round gauge offers a reproducible reference with ±0.001 mm tolerance, making it suitable where low measurement uncertainty is essential. With a nominal diameter of 1.84 mm, the pin functions as a reliable go/no‑go reference in comparative checks and fixture set‑up. The combination of small diameter and minimal form deviation reduces the influence of seating errors, which stabilises process control and shortens inspection cycles. Durable build for everyday workshop use Manufactured from special steel and finished for workshop conditions, the shaft provides a wear‑resistant contact surface across repeated measurements. The 50 mm length balances handling convenience and engagement depth in small bores, so the pin can be used as a reference in both manual gauges and fixture‑mounted checks. Robust construction and careful finishing extend service life, lowering replacement frequency and supporting continuous production. Seamless integration into inspection routines As a single‑unit reference pin, the component simplifies calibration tasks and spot checks within existing metrology setups. The compact design eases handling in confined assemblies and complements sets of precision pins for incremental sizing or limit checks. Supplied with traceable identifiers, the item supports organised inventory management and direct ordering through Metav IndustryLine for reliable re‑supply. Contact Metav Werkzeuge for tailored advice and fast supply of the Metav IndustryLine precision gauge pin M323.184 Technical data SKU: M323.184 GTIN: 4061905054822 Description: Test pin, single, 1.84 mm, ±0.001 mm, length 50 mm Weight: 0.004 kg Facts Diameter: 1.84 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop version Category: Gauge pins Eclass: 21170231 FAQ What tolerance does this gauge pin offer? The Metav IndustryLine gauge pin M323.184 is manufactured to a tolerance of ±0.001 mm, suitable for precision comparative and end‑measurement tasks. What are the pin's dimensions and form? The pin has a nominal diameter of 1.84 mm and a usable shank length of 50 mm, supplied as a single precision reference pin. Which material is used for the pin? The pin is made from special steel, selected for wear resistance and stable contact behaviour in routine workshop inspections. How is the pin typically used in inspection processes? This precision pin is used as a reference for bore verification, fixture set‑up and comparative checks where small‑diameter control is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.85mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine measuring accuracy, compact workshop design and stable 50 mm length for reliable end‑dimension checks; order the matching gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.185 — 1.85 mm | ±0.001 mm tolerance Gauge pin M323.185 is a workshop‑grade inspection pin designed for precise end‑dimension checks, fixture alignment and assembly verification in industrial metrology High-precision ±0.001 mm tolerance 1.85 mm diameter for fine-fit checks 50 mm length for stable probing Workshop-grade special-steel construction Precision that keeps production moving The gauge pin delivers a ±0.001 mm tolerance, which corresponds to a dimensional certainty in the micrometre range and removes ambiguity from pass/fail checks. Such accuracy is particularly valuable in quality control and incoming‑inspection work where repeatable end‑measurements are required. By using a finely ground 1.85 mm probe, measurement routines that test bore sizes, jig alignment or mating fits become faster and more repeatable, reducing inspection time and lowering the risk of downstream rework. Robust design for everyday workshop use Manufactured from special steel for consistent dimensional stability, the pin's 50 mm length provides the stiffness needed for stable probing while remaining easy to handle in workshop environments. This combination of compactness and rigidity helps maintain concentric contact during checks and supports quick manual exchanges on inspection benches or in fixture setups. The workshop specification reflects a balance between practical handling and measurement reliability, making it suitable for repetitive use in production areas. Simple integration into inspection workflows Delivered as a single inspection pin, the product is intended for direct use in gauge sets, fixture controls and handheld checks where a precise reference pin is required. Traceable labelling and a clear article identity support inventory and calibration processes, and the compact form factor makes it straightforward to store alongside other precision tooling. For specialised metrology tasks that need consistent end‑dimension verification, this pin functions as a dependable reference component. For micrometre-level inspection where every micron counts, choose the Metav IndustryLine gauge pin M323.185 — contact Metav Werkzeuge in Emmerich for tailored advice or to request the exact specification and handling notes via info@metav-werkzeuge.com Technical Data Article number: M323.185 GTIN: 4061905054839 Brand: Metav IndustryLine Facts Diameter: 1.85 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Supply form: single inspection pin Workshop specification FAQ What applications is this gauge pin suited to? The gauge pin M323.185 from Metav IndustryLine is suited to bore checking, fixture alignment and fine‑fit inspections where a 1.85 mm reference probe with ±0.001 mm tolerance is required. Is the dimensional tolerance of ±0.001 mm suitable for production control? Yes — a ±0.001 mm tolerance places the pin in the micrometre class, making it appropriate for high‑precision production control and final inspection tasks. How is the pin supplied and identified? The product is supplied as a single inspection pin under article number M323.185 (GTIN 4061905054839) and is intended for direct use in inspection kits or fixtures. Can this pin be used in fixture alignment and assembly checks? Yes; the 50 mm length and special‑steel construction provide sufficient stiffness and repeatability for alignment tasks and assembly verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.86mm Test Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high metrological accuracy and robust workshop design for consistent end‑dimension control; the 1.86 mm gauge pin with ±0.001 mm tolerance and 50 mm length ensures reproducible checks and reliable handling. Order the M323.186 directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.186 — 1.86 mm gauge pin, ±0.001 mm tolerance (Metav IndustryLine) A Test pin 1.86 mm designed for precision end‑dimension verification in gauge testing and fixture checks, supplied as a single workshop‑grade pin Workshop‑grade design Diameter 1.86 mm, ±0.001 mm tolerance 50 mm length in special steel Delivered in protective transport case Micrometre‑level accuracy for dependable end‑dimension checks The M323.186 provides ±0.001 mm repeatability (equivalent to 1 µm), enabling trustworthy verification of critical end faces and plug bores where sub‑millimetre deviations matter. Such fine tolerance reduces measurement uncertainty in acceptance testing and first‑article inspection, supporting clear go/no‑go decisions on production batches. By specifying a 1.86 mm diameter with one‑micrometre accuracy, the gauge pin streamlines dimensional control in jigs, fixtures and precision assemblies while keeping documentation and traceability straightforward. Robust workshop build that preserves precision Constructed from special steel and configured as a workshop‑grade single pin, this gauge component offers stability during repeated handling and short‑range checks. The 50 mm length balances accessibility with rigidity, reducing flex during insertion while remaining compact for bench work. A protective transport case is supplied to prevent damage in transit and storage, preserving geometric integrity and prolonging service life. The combination of durable material and secure packaging supports consistent results even in busy production environments. Smooth integration into inspection and setup routines As a purpose‑built gauge pin, this component fits directly into established inspection workflows — from fixture alignment to end‑measurement confirmation and calibration check routines. The precise tolerance reduces false rejects and rework, contributing to higher throughput and measurable cost savings in quality control. Compatibility with standard gauge blocks and pin holders makes this pin a practical choice for lab and workshop use, providing a simple, low‑risk way to raise measurement confidence during process validation. Contact Metav Werkzeuge for specification matching and to reserve the M323.186 gauge pin for your inspection routines — expert advice and fast supply from our Emmerich quality hub Technical data SKU: M323.186 GTIN: 4061905054846 Diameter: 1.86 mm Length: 50 mm Tolerance: ±0.001 mm Material: Special steel Weight: 0.004 kg Facts Measurement range: 1.86 mm Nominal accuracy: ±0.001 mm Length: 50 mm Net weight: 0.004 kg Special features Workshop version Single test pin delivery Protective transport case included Suitable for end‑dimension checks and fixture alignment FAQ What level of accuracy can be expected from this gauge pin? The M323.186 achieves ±0.001 mm accuracy (1 µm), making it suitable for precise end‑dimension verification in quality control and fixture checks. Is the pin supplied ready for use out of the box? Yes, the test pin is supplied as a single workshop‑grade item in a protective transport case to preserve geometry during storage and transit. Which materials is the gauge pin made from? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance in routine inspection tasks. Can this pin be used for fixture setup and calibration checks? The gauge pin is designed for end‑dimension checks, fixture alignment and compatibility with standard pin holders and gauge block setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.87mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of ±0.001 mm repeatability and a compact Ø 1.87 mm, 50 mm form factor to secure reproducible end‑measurements and go/no‑go checks in busy workshops; order directly from Metav Werkzeuge or consult the team for application advice. Gauge pin, single, Ø 1.87 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin is a workshop‑grade measuring mandrel designed for precise end‑measurements and insertion checks in precision engineering and quality control. Workshop‑grade design for robust use Diameter Ø 1.87 mm with ±0.001 mm tolerance 50 mm hardened measuring length for stability Made from special steel for wear resistance Precision where smallest deviations matter The compact measuring mandrel delivers a tolerance of ±0.001 mm, making it suited to tasks where micrometre accuracy is required. A Ø 1.87 mm diameter combined with a 50 mm length provides a stable contact surface that reduces bending and run‑out during insertion checks. This level of control helps maintain product conformity and reduces the risk of downstream rejects, so process reliability is improved and inspection cycles become more predictable. The component’s minimal form factor also eases storage and immediate access at the inspection bench. Robust construction for repeatable measurement Constructed from special steel and finished for workshop use, the pin balances hardness with surface finish to preserve measurement integrity over many cycles. The 50 mm measuring length gives sufficient engagement for most plug and end‑measurement tasks while remaining stiff enough for manual handling. Where repetitive checks are routine, the durable material and workshop execution minimise wear‑related drift and thus prolong the interval between rework or replacement, reducing long‑term operating costs. Practical application in quality control routines This precision probe is ideal for insertion and end‑measurement checks in small bore gauges, fixture verification and component acceptance testing. The narrow diameter suits fine bores and small features typical in precision machining, toolmaking and instrument manufacture. Marking and traceability are straightforward thanks to the SKU M323.187 and GTIN record, which supports inventory control and process documentation for quality management systems. Integration and handling guidelines Fitting the pin into inspection fixtures or comparator setups is uncomplicated due to the standardised cylindrical form. Gentle handling and clean contact surfaces preserve the ±0.001 mm performance; avoid abrasive cleaning and use appropriate storage to prevent nicks. The lightweight construction (approx. 0.004 kg) makes the part easy to position, while the workshop design tolerates regular handling encountered in production environments. Choose the Metav IndustryLine gauge pin M323.187 for reliable, repeatable small‑feature inspection — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.187 GTIN: 4061905054853 Brand: Metav IndustryLine Category: Messstifte ECLASS: 21170231 Facts Diameter: 1.87 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop execution SKU: M323.187 Label: Prüfstift, einzeln, 1,87mm, +/- 0.001 mm Länge 50 mm FAQ What level of accuracy can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.001 mm, indicating micrometre‑class repeatability suitable for fine inspection work. Is the pin suitable for small bore insertion checks and go/no‑go testing? Yes — the Ø 1.87 mm diameter and 50 mm length make the pin appropriate for small bore verification and routine go/no‑go assessments. Which material is used and what does that mean for wear resistance? The pin is made from special steel with a workshop finish, offering a balance of hardness and surface quality that supports extended service life under regular inspection use. Can this item be integrated into existing fixtures and gauges? The standard cylindrical geometry and documented SKU facilitate straightforward integration into inspection fixtures, small bore comparators and test jigs. How is traceability handled for inventory and quality records? The product is listed under SKU M323.187 with GTIN 4061905054853, which supports inventory control and documentation for quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.88mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Benefit from a combination of ultra-fine accuracy, a robust special-steel body and a compact 50 mm length for reliable end measurements; order the gauge pin directly via Metav Werkzeuge or consult our specialists if clarification is required. Gauge pin M323.188 — single gauge pin, 1.88 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) A gauge pin M323.188 designed for pinpoint end‑measurement tasks in workshop inspection and precision gauging. Diameter 1.88 mm for tight fits Tolerance ±0.001 mm for high precision 50 mm length, workshop execution Supplied in transport case for protection Accuracy that reduces rework and scrap The gauge pin achieves an exceptional ±0.001 mm tolerance, making it suitable where even minute deviations affect assembly performance. This level of precision translates directly into fewer rejects and less rework on mating parts: when end measurements are trustworthy, downstream processes run more predictably. The small diameter of 1.88 mm is ideal for verifying bores, pin fits and end positions in jigs and fixtures; the dimensional requirement for such tasks is explained plainly here — a tolerance of one thousandth of a millimetre means the pin will reveal deviations that are invisible to coarser gauges. Built for the workshop — durable and easy to handle Manufactured from special steel, the test pin combines surface hardness with corrosion resistance to withstand repeated use in a busy shop environment. The 50 mm length offers a practical balance between reach and rigidity: long enough to probe deeper seats yet short enough to avoid flex under hand inspection. The item is delivered in a protective transport case, which simplifies storage and reduces the risk of damage during transit. The workshop configuration emphasises serviceability and durability, so routine use does not erode reliability. Fast integration into inspection workflows Traceable identification and straightforward specifications mean the pin integrates easily with existing gauges and inspection routines. The compact design supports rapid checks at the bench or inline control points, shortening cycle times and supporting a more efficient quality loop. As a Metav IndustryLine component, the pin benefits from a quality screening process based in Emmerich, which supports consistent supply and quick clarification of technical queries. For projects requiring component-level testing or verifying end measures during assembly, this gauge pin is an efficient, low-overhead option. For precise end-measurements and dependable workshop performance, contact Metav Werkzeuge to request the M323.188 gauge pin and discuss delivery or technical details with our Emmerich team Technical Data Article number: M323.188 GTIN: 4061905055331 Category: Gauge pins Facts Diameter: 1.88 mm Length: 50 mm Weight: 0.004 kg Accuracy: ±0.001 mm Special features Material: special steel Workshop execution Supplied in transport case FAQ What tolerances can be checked with this gauge pin? The gauge pin M323.188 supports verification to ±0.001 mm, allowing inspection of fits and end positions where micrometre-level accuracy is required. Is the pin suitable for repeated workshop use? Yes, the workshop execution and special steel construction make the M323.188 robust enough for frequent checks while preserving dimensional stability. Does the product include protective packaging? The gauge pin is supplied in a transport case to protect the surface and ensure safe handling during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.89mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Combining sub-micron repeatability, a compact 50 mm working length and a hard-wearing special‑steel construction, this gauge pin provides dependable end‑dimension verification in production and inspection settings. Order the single gauge pin directly via Metav Werkzeuge or request advice from our consultants for application support. Gauge pin M323.189 — single inspection pin, 1.89 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.189 is a precision inspection pin for end‑dimension verification and plug‑gauge tasks in workshop and production metrology. Single gauge pin 1.89 mm diameter High precision ±0.001 mm tolerance 50 mm hardened special‑steel length Supplied in protective transport case Precise end‑dimension checks with measurable confidence The compact inspection pin delivers a diameter of 1.89 mm with an exceptional tolerance of ±0.001 mm, enabling highly repeatable end‑measurements for go/no‑go checks and verification of mating bores. The extremely fine tolerance corresponds to one micrometre resolution in practical use, which reduces rework and speeds decision cycles on the shop floor. This level of precision is particularly valuable for small‑part production where component fit and assembly depend on consistent end‑dimensions. Built for workshop use and frequent handling Designed as a workshop edition, the pin is manufactured from special steel and finished to withstand repetitive insertion and inspection routines. With a 50 mm working length and a compact form factor, the pin balances accessibility and stiffness for reliable tactile feedback during manual checks. Delivery in a protective transport case ensures the measuring surface remains free from contamination and impact damage during storage or transit, preserving long‑term accuracy. Integrates smoothly into measurement routines The inspection pin supports straightforward integration into standard metrology setups and fixture‑based control points. Its single‑piece design simplifies handling and quick substitution in test benches or inspection gauges, while the precise nominal diameter provides a clear reference for comparative assessments. For production control, the pin is a pragmatic choice where fast, repeatable verification of bore sizing and end‑dimensions improves throughput and reduces measurement uncertainty. For assured end‑dimension control, request the Metav IndustryLine gauge pin M323.189 from Metav Werkzeuge or consult our Emmerich team for tailored measurement guidance and order coordination Technical Data Article number: M323.189 GTIN: 4061905055348 Description: Single gauge pin, 1.89 mm, ±0.001 mm, length 50 mm Manufacturer brand: Metav IndustryLine Core specifications Diameter: 1.89 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.004 kg Features Workshop edition Material: special steel Supplied in protective transport case Category: Gauge pins / Inspection pins ECLASS: 21170231 FAQ What accuracy can be expected from this gauge pin? The Metav IndustryLine gauge pin M323.189 is specified at ±0.001 mm, providing micrometre‑level repeatability suitable for high‑precision inspection tasks. Is the pin suitable for routine production checks? Yes, the single inspection pin is intended for repetitive end‑dimension verification and integrates into production control routines where fast, dependable checks are required. What material is the pin made from and how durable is it? The pin is manufactured from special steel and finished for workshop use, offering robustness for frequent handling and insertion cycles. Does the delivery include protection for transport and storage? The product is supplied in a protective transport case to preserve the measuring surfaces during storage and transit. What are the physical dimensions and mass of the pin? Nominal diameter 1.89 mm, length 50 mm, weight approximately 0.004 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.8mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Combine ±0.001 mm repeatability with a 1.80 mm diameter and a 50 mm working length to secure reliable end‑dimension checks in routine inspection tasks; order the gauge pin directly through Metav Werkzeuge or consult our specialists for application guidance. Test pin M323.180 — Gauge pin, 1.80 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Test pin M323.180 is a workshop‑grade gauge pin designed for precise end‑dimension verification and tight‑tolerance inspection tasks in production and quality control. Tolerance ±0.001 mm for sub-micron checks Diameter 1.80 mm for fine-feature inspection Length 50 mm, workshop-grade construction Precision that minimises inspection uncertainty The M323.180 is engineered for high-precision measurement where small tolerances matter. With a declared variation of ±0.001 mm, the pin supports sub‑micrometre repeatability in comparative and end‑dimension checks. This level of accuracy reduces decision ambiguity during go/no‑go assessments and shortens corrective loops in quality control, allowing predictable, traceable results even on small bores and fine features. Robust design for dependable workshop use Manufactured from Special steel and offered as a workshop‑grade item, the gauge pin combines surface integrity with practical handling for repetitive inspection. The 50 mm overall length and compact 1.80 mm diameter make it easy to position by hand or in simple fixtures; the slim profile is particularly useful for confined checks while maintaining stiffness adequate for routine shopfloor use. The construction is optimised for longevity under frequent contact with mating parts. Suited for integration into inspection routines Intended for end‑dimension verification, the gauge pin serves as a reliable reference in bench inspections, fixture set‑ups and manual go/no‑go testing. Its clear nominal size and tight tolerance simplify documentation and traceability during sampling plans. For operations focused on measurable improvement, the component supports consistent measurement practice and helps to anchor in‑process quality checks within established workflows. Discuss application details with Metav Werkzeuge to confirm fitment for specific inspection tasks and to request the M323.180 gauge pin or tailored meter recommendations. Technical data Article number: M323.180 GTIN: 4061905054785 Label: Test pin, single, 1.80 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 1.80 mm Length: 50 mm Tolerance/variation: ±0.001 mm Weight: 0.004 kg ECLASS: 21170231 Special features Material: Special steel Workshop version (Werkstatt-Ausführung) Category: Gauge pin / Test pin Story trigger: end-dimension checks FAQ What tolerance does this gauge pin provide? The test pin M323.180 from Metav IndustryLine is specified with a variation of ±0.001 mm. Which materials is the pin made from? The M323.180 gauge pin is manufactured from special steel, selected for surface integrity and repeatable contact performance. What inspection tasks is the pin suited for? The pin is designed for end‑dimension verification, manual go/no‑go checks and fixture set‑ups where a 1.80 mm reference diameter and tight tolerance are required. How is the product identified for ordering? Order using the article number M323.180 or the GTIN 4061905054785 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.91mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micron-level repeatability, a slim profile for narrow bores and a robust workshop design for dependable end-measurement tasks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.191 — precision test pin, 1.91 mm, ±0.001 mm, 50 mm length The Gauge pin M323.191 is a compact precision test pin designed for end-measurement and gauging tasks in workshop and inspection environments. Workshop version for robust everyday use Diameter 1.91 mm for narrow bores Tolerance ±0.001 mm for micron precision 50 mm length for end-measurement tasks Micron-level repeatability that protects process quality A tolerance of ±0.001 mm (one micron) places this gauge pin in the class of precision inspection tools suited to high-accuracy tasks. That numerical tolerance means the pin can be used where repeatable fits and clearances are critical, for example when verifying bore roundness, plug fits or end dimensions on small components. The fine tolerance reduces the risk of rework and helps to maintain consistent assembly quality, so measuring routines become a reliable control point rather than an uncertain step. The M323.191 designation simplifies procurement and traceability in quality documentation. Slim profile for tight bores and accurate end measurements With a diameter of 1.91 mm and a length of 50 mm, the pin is tailored for narrow or deep bores where thicker gauges cannot access without disturbance. The slender geometry enables snug fit checks, alignment aids and the transfer of a defined datum in fixtures. The 50 mm working length balances reach with rigidity, keeping deflection low during insertion and withdrawal. In practical terms, that means more consistent gauge readings and fewer measurement artefacts when inspecting small components or precision bores. Workshop execution and material choice for durability Manufactured from special steel, this test pin offers dimensional stability and resistance to routine workshop wear. The designation "workshop version" signals a construction that tolerates frequent handling and process use while maintaining the specified accuracy. Simple maintenance—cleaning and gentle protection against corrosive atmospheres—preserves the measurement datum and prolongs service life. The compact mass (lightweight construction) also makes the pin easy to handle during repeated checks or in automated feeding arrangements. Clear procurement data and integration into inspection routines Technical identifiers simplify stockkeeping and quality records: the item is listed under SKU M323.191 and can be referenced in inspection plans and procurement lists. The small footprint and defined specification make this pin suitable as a standard inspection tool in toolrooms, assembly benches and first-off checks. Metav IndustryLine supplies the product as part of a broad range of metrology items, backed by the company’s logistics and quality filtering in Emmerich, which supports consistent availability for workshops and production lines. Contact Metav Werkzeuge to discuss how the Metav IndustryLine gauge pin M323.191 fits into existing inspection routines and to arrange immediate supply from Emmerich. Technical data SKU: M323.191 GTIN: 4061905055362 Material: Special steel Weight: 0.004 kg Length: 50 mm Core technical data Diameter: 1.91 mm Tolerance (deviation): ±0.001 mm Length: 50 mm Mass: 4 g Special features Workshop version (robust construction) Designed for end-measurement and gauging tasks Compact geometry for narrow bores ECLASS: 21170231 FAQ What is the measurement tolerance of this gauge pin? The measurement tolerance is ±0.001 mm for the gauge pin M323.191 (Metav IndustryLine, SKU M323.191), suitable for micron-level inspection. Which material is used for the pin? The pin is made from special steel, selected for dimensional stability and workshop durability for the Metav IndustryLine gauge pin M323.191. For which applications is the pin intended? This test pin is intended for end-measurement, bore gauging and plug-fit checks on small components where a 1.91 mm diameter probe and a 50 mm length are required. How should the pin be stored between uses? Store the pin clean and dry to protect the datum; gentle handling and routine cleaning maintain the specified ±0.001 mm accuracy for the Metav IndustryLine pin. How is the product identified for procurement and documentation? Use SKU M323.191 and GTIN 4061905055362 to reference the exact Metav IndustryLine gauge pin in purchasing and inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.92mm Gauge Pin Length 50mm ±0.001mm, Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.001 mm accuracy, Ø 1.92 mm compact diameter and a 50 mm length for reproducible end‑measure checks — order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.192 gauge pin – Ø 1.92 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.192 gauge pin is a single, workshop‑grade precision pin designed for end‑measure and fit checks in small‑bore components and assembly jigs. High precision ±0.001 mm tolerance Diameter Ø 1.92 mm for small bores Robust special steel, workshop version Supplied in transport case for protection Reduce rejects with verifiable tolerance control A tolerance of ±0.001 mm delivers measurable benefits for quality assurance: fewer false rejects, consistent fits and reliable go/no‑go decisions in serial or small‑batch production. The exceptionally tight tolerance makes the pin suitable for incoming inspection and final dimensional checks where reproducibility is essential. By converting microscopic dimensional certainty into predictable assembly behaviour, the pin supports shorter inspection cycles and a lower scrap rate. Durable construction for repeated handling Manufactured from special steel in a workshop specification, the pin combines wear resistance with dimensional stability under normal shop conditions. The material choice and hardened finish ensure that repeated insertion and withdrawal do not significantly alter the measuring diameter, which preserves long‑term accuracy and reduces replacement frequency. This robustness is particularly valuable for high‑throughput inspection stations where downtime and tool turnover translate directly into cost. Compact geometry for small assemblies and precise seating With a diameter of 1.92 mm and a 50 mm length, the pin is tailored to access narrow bores and tight clearances while still providing sufficient engagement length for stable measurement. The compact form factor simplifies handling in confined assemblies and fixtures, enabling precise alignment and end‑mass checks that would be difficult with bulkier tools. Its geometry supports exact seating in gauges and jigs, helping to guarantee interchangeability across mating parts. Workshop ready and protected for transport Supplied in a transport case, the pin arrives ready for workshop use and organised storage, reducing the risk of handling damage and corrosion during transit. The workshop‑grade finishing and lightweight design ease manual handling on busy benches and during routine inspections. Supplied as a single item, the configuration suits calibration trays or bespoke sets where individual pins are stored and tracked. Contact Metav Werkzeuge in Emmerich for specification advice or to request the M323.192 gauge pin; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for rapid, expert assistance Technical Data Article number: M323.192 GTIN: 4061905055850 Manufacturer: Metav IndustryLine Weight: 0.004 kg Facts Diameter: 1.92 mm Length: 50 mm Tolerance: ±0.001 mm Special features Workshop version Delivery in plastic/wooden case for transport Single gauge pin Category: Gauge pins FAQ What is the dimensional tolerance of this gauge pin? The M323.192 gauge pin is specified to ±0.001 mm, making it suitable for high‑precision end‑measure and fit checks in small‑bore applications. What material is the pin made from? The gauge pin is manufactured from special steel in a workshop specification, delivering wear resistance and dimensional stability for repeated inspection tasks. For which tasks is this pin recommended? The pin is intended for end‑mass checks, bore gauging and assembly verification of small components where a Ø 1.92 mm diameter and tight tolerance ensure reliable seating and measurement. How is the pin delivered for storage and transport? The pin is supplied in a protective transport case, which simplifies handling, organisation and protection during movement within the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.93mm Test Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of high repeatability through ±0.001 mm tolerance and a compact 1.93 mm diameter in a robust 50 mm length for reliable end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.193 Gauge pin — 1.93 mm, ±0.001 mm, 50 mm (Metav IndustryLine) M323.193 is a single gauge pin designed for precise plug‑type inspection and reference measurements in workshop environments and small‑part inspection tasks. High dimensional accuracy ±0.001 mm Hardened special steel, workshop version 50 mm nominal length for recessed features Precision for repeatable inspection results The M323.193 gauge pin is manufactured to a tight ±0.001 mm tolerance, offering a measurable improvement in dimensional accuracy when used as a go/no‑go reference or for verification of bore finishes. The small 1.93 mm diameter makes it suitable for fine hole checks and end‑measurement tasks where minimal clearance is required. Specified tolerances support consistent pass/fail decisions during quality control and reduce rework by providing an unequivocal reference for machining tolerances. Robust construction for everyday workshop use Built from special steel and labelled as a workshop version, this inspection pin combines the stiffness required for precise seating with the resilience needed for frequent handling. The 50 mm length permits engagement in slightly recessed features while maintaining stability during measurement. The single‑piece delivery and compact mass aid quick handling in busy inspection routines, helping teams maintain throughput without compromising on measurement confidence. Integration into inspection workflows and traceability Designed as a straightforward plug gauge, the item integrates easily into manual measurement sequences and fixture checks. Markings and the supplied article data facilitate traceable record‑keeping for production lots and inspection reports. Lightweight and compact, the pin supports fast changeover between checks and is compatible with common bench measurement tools, enabling concise documentation of nominal measurements and deviations. Practical benefits for production and quality assurance Using a dedicated gauge pin with such fine tolerance reduces ambiguity at critical inspection stages and supports rational decision‑making: fewer ambiguous rejects, clearer quality records and more predictable process control. The combination of precision, compact diameter and usable length makes this inspection pin a pragmatic choice for metrology tasks that demand exact fit verification without elaborate fixturing. Consult Metav Werkzeuge for application guidance on the M323.193 gauge pin and secure expert recommendations tailored to specific inspection challenges at our Emmerich site Technical Data Article number: M323.193 GTIN: 4061905055867 Label: Gauge pin, single, 1.93 mm, ±0.001 mm, length 50 mm Weight: 0.004 kg Core data Diameter nominal: 1.93 mm Tolerance: ±0.001 mm Length nominal: 50 mm Quantity: single piece Features and materials Material: special steel Version: workshop execution Application: plug‑type inspection and reference measurement Packaging: individual supply FAQ What nominal diameter does the pin have? The gauge pin has a nominal diameter of 1.93 mm, specified for fine bore and end‑measurement applications. What tolerance and repeatability can be expected? Manufactured to ±0.001 mm, the pin provides high repeatability suitable for strict inspection criteria and clear go/no‑go referencing. Is the pin delivered as a single item or in sets? This article is supplied as a single gauge pin, intended for direct integration into inspection benches and tool kits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.94mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel in Case - Metav IndustryLine
Benefit from the ±0.001 mm tolerance and the special steel construction for repeatable end‑measurement references; compact 50 mm length makes workshop handling straightforward — order the gauge pin directly via Metav Werkzeuge or contact our consultants for tailored advice. M323.194 Gauge Pin (Ø 1.94 mm) — ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) A M323.194 gauge pin designed for precise end‑measurement checks and reference fits in workshop and inspection applications. Workshop execution, hardened body Tight tolerance ±0.001 mm Diameter Ø 1.94 mm, length 50 mm Precision that secures dimensional control The gauge pin delivers a measured diameter of 1.94 mm with a stated accuracy of ±0.001 mm, making it suitable where tight clearances and reproducible fits are required. This level of precision supports reliable reference measurements and helps to reduce uncertainty in assembly and inspection processes. The compact design keeps thermal mass low and minimises handling errors while the slim profile is ideal for small bores and plug gauges. Robust build for everyday workshop use Manufactured from special steel, the pin is engineered for workshop durability and long service life. The workshop execution indicates enhanced resistance to knocks and frequent handling, ensuring the dimension stays within specification during routine use. Delivered in a transport case, the component arrives protected for storage and safe transfer between bench and machine, which preserves calibration and surface condition over time. Practical handling and application benefits With a length of 50 mm, the pin offers a practical working reach without compromising stiffness; this makes it easy to seat and withdraw in bores or gauge blocks. The modest weight supports single‑handed use and quick interchange in measuring fixtures. As a single precision pin, it is an economical option for establishing end limits, setting up jigs or checking hole diameters in series production where repeatability is essential. Quality assurance and traceability The product is supplied under the Metav IndustryLine range and carries a clear identifier M323.194, allowing traceable inventory and straightforward reference in quality records. The use of a consistent material and workshop specification ensures predictable wear behaviour and supports scheduled replacement or inspection intervals within quality systems. Contact Metav Werkzeuge today to discuss whether the M323.194 gauge pin fits your measuring chain or to request sample availability from our Emmerich stock. Technical data Article number: M323.194 GTIN: 4061905055874 Manufacturer: Metav IndustryLine Material: Special steel Diameter: 1.94 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Core specifications Diameter Ø: 1.94 mm Nominal length: 50 mm Accuracy: ±0.001 mm Mass: 0.004 kg Special features Workshop execution Delivered in transport case Suitable for end measurements SKU: M323.194 FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.001 mm, providing high repeatability for end‑measurement tasks. Which material is the pin made from? The pin is manufactured from special steel, selected for durability in workshop environments. Is the pin supplied protected for transport? Yes, delivery includes a transport case to protect the pin during shipment and handling. For which measurement tasks is this pin intended? The component is designed for end‑measurement checks, reference fits and small‑bore inspections where a 1.94 mm reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.95mm Gauge Pin Precision ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of traceable ±0.001 mm accuracy, compact 1.95 mm diameter and robust workshop design for reliable in-process checks and reduced rework. Order the part directly via Metav Werkzeuge or contact their consultants for specification matching. Gauge pin M323.195 — precision gauge pin, 1.95 mm diameter, ±0.001 mm accuracy A gauge pin M323.195 designed for high‑resolution hole verification and end‑measure checks in workshop metrology. Workshop version for industrial use Diameter 1.95 mm with ±0.001 mm tolerance Length 50 mm for versatile checking Special steel construction for durability Accuracy that secures process reliability The gauge pin delivers an exceptionally fine ±0.001 mm tolerance, making it suitable where small deviations drive scrap rates and rework costs. With a nominal diameter of 1.95 mm, the hardened rod provides a defined reference for through‑holes and bores, enabling quick pass/fail checks during setup and batch inspection. Using a fixed pin as a mechanical reference reduces measurement variability compared with ad‑hoc checks and supports repeatable gauge‑based control points in production. Robust design for everyday workshop demands Built as a workshop version, the pin combines a slim profile with a special steel alloy selected for wear resistance and dimensional stability. The 50 mm length offers adequate engagement for most bore depths encountered in small to medium assemblies while keeping handling simple. Lightweight at approximately 4 g, the component is easy to manoeuvre in jigging and fixture work. Delivery includes transport protection in a dedicated case to preserve the reference surface during storage and transit. Streamlined quality routines and traceability The item is supplied as a single precision gauge with clear identification (SKU M323.195, GTIN 4061905055881), facilitating inventory control and traceability in quality documentation. As a defined end measure, the pin is suitable for routine go/no‑go verifications, assembly fixtures and comparative checking against calibrated standards. Integrating a fixed‑dimension pin into inspection jigs shortens measurement cycles and helps maintain consistent acceptance criteria across shifts. Request availability or a technical consultation for the Metav IndustryLine M323.195 gauge pin from Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fit for purpose and delivery options Technical data Article number: M323.195 GTIN: 4061905055881 Material: Special steel Diameter: 1.95 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Facts Category: Gauge pins (Messstifte) Version: Workshop execution Packaging: Supplied in transport case SKU: M323.195 Special features End‑measure application Single pin delivery Robust surface finish for repeated use Compact, easy‑to‑handle geometry FAQ What is the principal use of this gauge pin? The M323.195 gauge pin is intended for high‑precision hole verification and end‑measure checks in workshop and production environments. Which materials is the pin suitable for checking? The gauge pin itself is made from special steel and is used as a dimensional reference for components irrespective of workpiece material; the M323.195 serves as a mechanical reference in fixtures and inspection jigs. How is the part delivered and protected? The M323.195 is supplied individually and protected in a transport case to maintain the reference surfaces during storage and transit. Can the pin be used in routine production inspection? Yes, the gauge pin M323.195 is designed for repeated go/no‑go and comparative checks to speed up routine quality control tasks. How is the item identified for inventory and traceability? Identification is supported by SKU M323.195 and GTIN 4061905055881 for clear traceability in stock and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.96mm Gauge Pin Length 50mm ±0.001mm Workshop Version In Plastic Case - Metav IndustryLine
Take advantage of the combination of ultra‑fine accuracy, compact format and a robust workshop design for reproducible reference measurements. The tight ±0.001 mm tolerance together with a 1.96 mm nominal diameter ensures stable pass/fail control and reduced rework. Order the part directly via Metav Werkzeuge or request advice from our consultants. Gauge pin M323.196 — 1.96 mm diameter, ±0.001 mm accuracy, 50 mm length (Metav IndustryLine) A gauge pin M323.196 engineered for precise end‑measure checks and fine workshop gauging, ideal as an inspection reference in small‑part production and assembly. High-precision ±0.001 mm tolerance 1.96 mm nominal diameter 50 mm working length Special steel; workshop version; transport box Stabilise inspection routines with micrometre-level precision The Metav IndustryLine gauge pin M323.196 delivers a defined measurement reference by combining a ±0.001 mm tolerance with a small nominal diameter. In practice this means clearer go/no‑go decisions on production lines and fewer ambiguous measurements during assembly checks. The narrow tolerance reduces statistical spread in manual verification steps, supporting faster process control and a lower scrap rate. The specification is particularly relevant where tight fits and end‑dimensions determine final part acceptance. Compact design for fine mechanical and precision tasks Classified in the micro range, this inspection pin sits within the segment optimised for fine mechanical work (measurement ranges up to 100 mm). The 1.96 mm diameter and 50 mm length create a short, torsion‑resistant profile that is well suited to watchmaking, connector production and small gear inspection. The compact geometry keeps handling straightforward while maintaining repeatability, so setup times are reduced and operator fatigue is minimised during repetitive checks. Robust workshop execution that protects measurement integrity Manufactured from special steel in a workshop edition, the pin is engineered for routine use in shop environments where resilience matters. The low mass and slim profile make positioning effortless, while the supplied transport box protects the reference surface during storage and transport. The construction supports reliable seating in gauges and fixtures, helping to maintain surface condition and dimensional constancy across multiple measurement cycles. Metav’s quality filter in Emmerich ensures consistent supply and traceable product handling for industrial buyers. For procurement or technical matching of Metav IndustryLine gauge pins, contact Metav Werkzeuge to arrange supply or consult on integration with existing inspection fixtures. Technical data Article number: M323.196 GTIN: 4061905055898 Category: Gauge pins Version: Workshop edition Facts Nominal diameter: 1.96 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Special features Material: Special steel Supplied in transport box for protection during transport Workshop execution for routine use Accuracy class: high‑precision ±0.001 mm FAQ What is the nominal diameter of this inspection pin? The nominal diameter is 1.96 mm for the gauge pin M323.196 from Metav IndustryLine. How tight is the dimensional tolerance? The device is specified to ±0.001 mm, offering high‑precision reference for end‑measure checks. Is the pin supplied ready for workshop use? Yes, the workshop execution of the Metav IndustryLine gauge pin is supplied in a transport box to protect the measuring surfaces during handling and storage. Which applications suit this small‑format pin? The pin is intended for micro‑range measurements: fine mechanical parts, connector inspection and small assembly control where a short, rigid probe improves repeatability. Can this pin be used as a master for go/no‑go fixtures? The high accuracy and stable geometry make the M323.196 suitable as a reference master in fixture setups and comparative checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.97mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine dimensional control and workshop robustness for reliable locating and go/no‑go checks. The high ±0.001 mm tolerance and compact 1.97 mm diameter ensure consistent repeatability in fixture setting and inspection; order the gauge pin directly via Metav Werkzeuge or contact our consultants for batch supply and technical advice. M323.197 Gauge Pin – ø 1.97 mm, ±0.001 mm, 50 mm (Metav IndustryLine) A M323.197 gauge pin engineered for precise diameter verification and accurate locating in workshop metrology and fixture set‑up applications. Workshop version for robust use Diameter tolerance ±0.001 mm for micro accuracy Length 50 mm suitable for fixture and gauge blocks Delivered in a transport case for secure handling Precision where micrometres count The gauge pin provides an exceptionally fine tolerance of ±0.001 mm (1 µm), which translates into reliable dimensional checks and minimal uncertainty when setting tools, jigs or locating pins. Such a narrow tolerance supports repeatable fits and is especially useful where small clearance or interference conditions must be controlled. The small diameter combined with the fine tolerance makes this component ideal for calibration tasks, plug‑gauge comparison and critical locating points in assembly operations. Built for everyday workshop use Presented in a workshop version, the pin balances delicate accuracy with handling resilience. The item is machined from special steel, providing a stable form for tactile measuring and routine use at the bench. The 50 mm length offers sufficient engagement for depth and shoulder locating while remaining easy to position in fixtures. Supplied as a single pin, it suits both singular inspection points and incremental quality checks on small batches. Practical handling and traceability benefits Safe transport and organisation are supported by delivery in a protective transport case, reducing the risk of damage and contamination between uses. The compact weight and format mean straightforward storage and quick retrieval during setup procedures. As part of a metrology toolkit, this gauge pin pairs well with micrometers, comparator stands and gauge blocks to form concise measurement chains that speed up inspection without compromising accuracy. For precision locating and reliable micro‑inspection, request the M323.197 gauge pin from Metav Werkzeuge or consult the Metav Werkzeuge team in Emmerich for tailored supply and technical specification advice. Technical data Article number: M323.197 SKU: M323.197 GTIN: 4061905055904 ECLASS: 21170231 Facts Diameter: 1.97 mm Tolerance: ±0.001 mm (1 µm) Length: 50 mm Weight: 0.004 kg Special features Workshop version Material: special steel Delivered in transport case (plastic/wood) Single gauge pin FAQ What is the exact tolerance of this gauge pin? The tolerance of the M323.197 gauge pin is ±0.001 mm, equivalent to 1 µm, making it suitable for high‑precision locating and inspection tasks. Which material is used for the pin and how does it affect use? The pin is made from special steel, chosen for dimensional stability and workshop durability; this material supports repeated seating without rapid wear. Is the pin supplied ready for use out of the box? Yes, the M323.197 is supplied as an individual gauge pin in a protective transport case, ready for immediate use in fixture set‑up and inspection routines. For which applications is this gauge pin most suitable? It is intended for precise diameter verification, locating dowels and plug‑gauge comparison in workshop metrology, fixture assembly and small‑part inspection. Can this pin be used together with gauge blocks or micrometers? The pin integrates well into measurement chains and is compatible with gauge blocks, micrometers and comparator arrangements to form fast, repeatable checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.98mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
The combination of ultra‑fine tolerance and compact length offers reliable end‑measurement for fixture checks and serial inspection. With a nominal diameter of 1.98 mm and a tolerance of ±0.001 mm, this workshop‑grade pin supports reproducible results and reduced rework. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.198 — single inspection pin, 1.98 mm ±0.001 mm (Metav IndustryLine) A Gauge pin M323.198 designed for accurate end‑dimension checks and fixture verification in workshop and inspection environments. Precision tolerance ±0.001 mm Nominal diameter 1.98 mm Length 50 mm for fixture checks Workshop design, robust construction Consistent measurement where micrometres meet the shop floor The inspection pin delivers industrially relevant precision with a declared tolerance of ±0.001 mm, making it suitable for repeatable end‑measurements and gauge setting. A narrow nominal diameter of 1.98 mm means the pin can be used in small bores and alignment tasks where fine fit and low clearance are critical. This level of accuracy reduces the need for repetitive adjustments and supports efficient quality control routines, translating directly into less downtime and more predictable process outcomes. Robust design for daily workshop use Manufactured from special steel, the pin balances hardness with dimensional stability to withstand frequent handling in a workshop environment. The 50 mm length is optimised for fixture and gauge plates, providing adequate reach without compromising rigidity. Its light mass contributes to fast handling during inspection sequences while the workshop design ensures resistance to routine wear. Where compact, dependable test artefacts are required, this pin provides a straightforward solution that complements existing inspection kits. Practical advantages that improve workflow As a single, dedicated test pin, the component simplifies inventory and replacement practices for maintenance teams and quality technicians. The small footprint and low weight facilitate quick insertion and extraction during serial checks, shortening cycle times on repetitive measurements. Traceable identification via SKU and GTIN supports inventory control and documentation, while the construction material and tolerance class help to maintain measurement confidence across batches and operators. For workshop‑grade end‑measurement select the Metav IndustryLine gauge pin M323.198 and contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: M323.198 GTIN: 4061905056703 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 1,98mm, +/- 0.001 mm Länge 50 mm Facts Nominal diameter: 1.98 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop version Single inspection pin Intended for end‑measurement and fixture checks FAQ What tolerance can be expected from this inspection pin? The inspection pin is specified with a tolerance of ±0.001 mm, providing the fine accuracy required for high‑precision end and fit measurements. Which materials is the pin made from and how does that affect wear? The pin is made from special steel, offering a balance of hardness and dimensional stability that supports regular workshop use while resisting typical wear. For which applications is this pin most suitable? This single test pin is suited to end‑dimension checks, bore gauging and fixture verification where a 1.98 mm nominal diameter and 50 mm length meet the inspection requirement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com