Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
1.99mm Gauge Pin Single ±0.001mm Accuracy 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm micro‑accuracy, robust special‑steel construction and a compact 50 mm length for repeatable end‑measurements and tight‑fit checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored technical advice. Gauge pin M323.199 – 1.99 mm, ±0.001 mm accuracy (Metav IndustryLine) The gauge pin M323.199 is a single test pin designed for precision end‑measurements and bore verification in workshop and inspection environments. ±0.001 mm high precision tolerance Ø 1.99 mm for fine bore checks 50 mm hardened special‑steel length Delivered in protective case for transport Engineered precision for reproducible checks High repeatability is achieved through the ±0.001 mm tolerance, which reduces measurement uncertainty and supports consistent quality control in small‑bore applications. The very small 1.99 mm diameter is suited to tight fits and fine components where even minor deviations affect assembly behaviour; choosing a purpose‑made test pin eliminates the variability introduced by improvised mandrels. This level of dimensional control is particularly valuable when verifying press fits, gauging alignment of mating parts or sampling production batches to confirm process stability. Workshop resilience with compact handling benefits Constructed from special steel and finished for workshop duty, the pin combines wear resistance with a compact 50 mm length that is easy to handle and store. The workshop specification ensures robustness under routine handling and frequent insertion cycles, extending tool life and reducing downtime for replacement. Supplied in a protective case for transport, the component arrives ready for secure storage and safe transit between job sites or inspection stations, supporting streamlined workflow in a busy production environment. Practical integration into inspection and tooling routines As a single, precision probe the component fits naturally into manual inspection benches, fixture setting and go/no‑go checking sequences. Its simple geometry makes it compatible with standard probe holders and indexing fixtures, enabling straightforward integration without complex adaptation. For inventory and traceability the item is listed under Metav IndustryLine and is suitable for use wherever compact, high‑accuracy pins are required to confirm bore diameters or to act as reference mandrels in assembly verification. Secure the Metav IndustryLine 1.99 mm gauge pin through Metav Werkzeuge for stock confirmation and specialist procurement advice — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M323.199 GTIN: 4061905056710 Category: Test pins Facts Diameter: 1.99 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop version Delivered in protective case Single test pin FAQ What tolerance does this test pin offer? The gauge pin M323.199 provides a tolerance of ±0.001 mm, suitable for high‑precision bore checks and end‑measurements. What are the exact dimensions of the pin? The pin has a diameter of 1.99 mm and a nominal length of 50 mm. What material is used for the pin? This Metav IndustryLine test pin is made from special steel, optimised for workshop durability. Is the pin supplied ready for transport? Yes, the item is delivered in a protective case to ensure safe transport and storage. Can the pin be used in fixture and gauge holders? The simple, cylindrical geometry of the gauge pin M323.199 makes it compatible with common probe holders and indexing fixtures for manual inspection or fixture setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.9mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of highly reproducible measurement through a combination of sub‑micron tolerance, robust special steel construction and a protective transport case for safe handling; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.190 — precision test pin, 1.90 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.190 is a single, ground test pin intended for end‑measurements and alignment tasks in workshop inspection and small‑part production. Precision ±0.001 mm tolerance Diameter exactly 1.90 mm for end measurements Robust special steel for wear resistance Delivered in a protective transport case Consistent measurement where tolerances matter The M323.190 is engineered to provide repeatable results in verification and end‑of‑line checks. With a stated tolerance of ±0.001 mm, the test pin supports measurement tasks that require sub‑micron consistency; this precision reduces uncertainty in go/no‑go checks and plug‑gauge procedures. The fine tolerance is achieved through controlled grinding and finishing; for users less familiar with metrology, this level of accuracy means fewer reworks and clearer pass/fail decisions during inspection. Durable construction for routine workshop use Manufactured from special steel, the pin balances hardness and toughness to resist wear during repeated insertions and contacts. The 50 mm length provides a stable engagement depth for many alignment and verification tasks, while the small diameter of 1.90 mm suits tiny bores and pin gauges used in tooling, fixture setting and small assembly jigs. The workshop version is designed for everyday handling, combining a hardened measuring tip with a shank that resists bending under normal use, thereby extending service life. Practical handling and transport safety Delivered in a protective transport case, the pin is protected against impact and contamination in transit or on the shop bench. The case aids organised storage and reduces the risk of damage that would otherwise compromise the tight ±0.001 mm tolerance. For manufacturing environments where traceability and tool condition are essential, keeping measurement tools in a dedicated case supports quality routines and helps maintain calibration intervals. Application focus and compatibility As a purpose‑made gauge pin, this item is suited to end‑dimension checks, plug‑gauge tasks and minor alignment duties in precision engineering and small‑component manufacturing. The single‑piece format is ideal for integration into fixture checks or for use as a reference pin during assembly. Because the design is straightforward, the pin is compatible with common bench test set‑ups and inspection jigs used across mechanical workshops and small production lines. For traceable, workshop‑grade precision choose Metav IndustryLine gauge pins — order via Metav Werkzeuge and request application guidance from our Emmerich‑based specialists. Technical Data Article number: M323.190 GTIN: 4061905055355 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 1,90mm, +/- 0.001 mm Länge 50 mm SKU: M323.190 Facts Diameter: 1.90 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop version (Werkstatt‑Ausführung) Delivered in protective transport case for safe handling Material: special steel Intended for end‑measurement / end masses (endmasse) FAQ What level of precision does this gauge pin provide? The M323.190 gauge pin offers a tolerance of ±0.001 mm, making it suitable for tasks that demand sub‑micron repeatability in end‑measurements. Which materials is the pin made from and how does that affect wear? The pin is made from special steel; this material provides an optimised balance of hardness and toughness to resist wear during repeated use. Is the pin suitable for measuring very small bores? Yes — with a diameter of 1.90 mm the pin is intended for small bores and precise plug‑gauge checks commonly found in fixture and tool set‑ups. How is the item supplied for storage and transport? The gauge pin is delivered in a protective transport case to prevent damage and contamination, supporting consistent measurement performance. Can the pin be used as a reference in assembly jigs? The single, ground format makes it appropriate for reference and alignment duties in assembly and inspection jigs where a fixed diameter reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10,01- 11,00mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 10,01- 11,00mm- Stufung: 0,01mm- Anzahl/Satz: 100
10.01mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop-hardened construction and very fine tolerance for reliable end-dimension checks; order directly via Metav Werkzeuge or contact our consultants for a tailored delivery. Gauge pin, single, Ø 10.01 mm × 50 mm — Metav IndustryLine workshop gauge, ±0.002 mm accuracy The Gauge pin, single, Ø 10.01 mm × 50 mm is a workshop-grade precision pin for end-size verification and fast pass/fail checks in assembly and inspection processes. ±0.002 mm accuracy for tight tolerances Special steel for long service life 50 mm length for end-dimension checks Workshop design for everyday use Accuracy that reduces rework and speeds inspection The gauge pin delivers a measured tolerance of ±0.002 mm, a level of precision that supports tight quality limits and repeatable go/no-go checks. Such fine accuracy minimises false rejects and reduces rework cycles by providing a clear, objective reference for end-dimension inspection. In practice, a consistent reference pin streamlines first-article inspections and routine control steps, helping production maintain process capability and reduce downtime. Robust design made for everyday workshop use Constructed from special steel and specified as a workshop version, this pin combines durability with practical handling. The 50 mm shaft length provides a reliable grip and contact surface for end-face checks, while the compact Ø 10.01 mm size suits a wide range of components and fixtures. At approximately 0.1 kg the gauge is easy to position but substantive enough to resist accidental distortion, supporting high-repeatability measurements during frequent use. Simple integration into quality workflows and traceability The single-pin format supports rapid comparison checks and can be incorporated into inspection jigs or manual gauge sets for batch control. The product is identifiable by SKU M323.A01 and GTIN 4061905063190, which aids stock management and traceability in purchasing and quality records. For businesses seeking pragmatic metrology tools, the pin offers a reliable reference that integrates with standard workshop practices while supporting consistent measurement outcomes. For precision end-dimension checks request the Metav IndustryLine gauge pin (SKU M323.A01) via Metav Werkzeuge for a customised delivery and technical advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.A01 GTIN: 4061905063190 ECLASS: 21170231 Facts Diameter: 10.01 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Application: End-dimension checks / inspection pins Category: Gauge pins (Messstifte) Version: Workshop edition FAQ What tolerance can be expected from this pin? The Gauge pin, single, Ø 10.01 mm × 50 mm is specified with an accuracy of ±0.002 mm, suitable for tight workshop inspection tolerances. Which material is used for this gauge pin? This Metav IndustryLine inspection pin is made of special steel, chosen for wear resistance and stable contact surfaces during repetitive use. Can the pin be used for pass/fail checks on shafts and bores? Yes — the Ø 10.01 mm diameter and 50 mm length make the pin appropriate for quick pass/fail and end-dimension checks on shafts, bores and mating parts. How is the product identified for ordering and traceability? The item is listed under SKU M323.A01 with GTIN 4061905063190, enabling direct procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.02mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from workshop-grade construction, a 10.02 mm nominal diameter and an accuracy of ±0.002 mm for repeatable reference measurements; robust special steel and a transport-safe box support reliable handling on the shop floor. Order the gauge pin directly via Metav Werkzeuge or consult our technical team for application support. Gauge pin, single — 10.02 mm diameter | 50 mm length (Metav IndustryLine) The Gauge pin, single — 10.02 mm, 50 mm is a workshop-grade reference pin designed for quick dimensional checks, fixture alignment and end‑measure comparisons in production and maintenance Workshop version for robust use Diameter precisely 10.02 mm Tolerance ±0.002 mm Supplied in transport box Precision that secures process control The compact reference element delivers a nominal 10.02 mm diameter with a stated ±0.002 mm tolerance, making it suitable where small deviations can affect assembly or fit. As a hardened reference, the pin reduces measurement uncertainty when used as a master gauge for go/no‑go checks, plug‑fit trials or repeatable set‑ups. The declared tolerance corresponds to micrometric control and supports consistent quality documentation across batches. Built for workshop handling and longevity With a 50 mm overall length and manufacture from special steel, this reference pin balances rigidity and manageable handling for bench or machine‑side use. The workshop version specification prioritises robustness over delicate lab finishes, so routine loading and storage is less likely to leave the reference compromised. Delivery in a transport box protects the pin during transit and simplifies organisation on the shop floor. Fast integration into inspection and set‑up routines Identified as M323.A02, this gauge pin fits inspection jigs, fixture seats and manual checking stations where a short, reliable reference is required. As a single‑piece reference it is particularly useful for end‑measure validation and repeat checks during maintenance intervals. Traceable identification via GTIN supports inventory control and batch tracking when integrated into quality workflows. Contact Metav Werkzeuge for guidance on fixture compatibility or to request detailed dimensional drawings and stock information — Metav Werkzeuge provides quick, expert advice from Emmerich to support production decisions Technical data Article number: M323.A02 GTIN: 4061905063206 Brand: Metav IndustryLine Label: Gauge pin, single, 10.02 mm length 50 mm Measured values Diameter: 10.02 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Features & materials Material: Special steel Version: Workshop version Delivery: Transport box for safe transport Category: Gauge pins (Messstifte) FAQ What is the stated tolerance of this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, enabling micrometric repeatability for reference checks with the M323.A02. For which tasks is this reference pin intended? This workshop‑grade pin is intended for dimensional checks, fixture alignment and end‑measure comparisons in production and maintenance environments. Is the pin protected for transport? Yes, the item is supplied in a transport box to protect the reference during shipping and handling. What material is used for this gauge pin? The pin is manufactured from special steel, chosen for dimensional stability and resistance to wear under routine use. How can the product be identified in stock systems? Identification is by article number M323.A02 and GTIN 4061905063206 for inventory and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.03mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high precision and a compact form factor — the 10.03 mm diameter with ±0.002 mm tolerance and a 50 mm length ensure repeatable end‑size checks and stable fixture locating; order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.A03 — 10.03 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.A03 is a precision ground test pin designed for end‑size verification and fixture locating in workshop environments. Precision diameter 10.03 mm, tolerance ±0.002 Special steel for long service life 50 mm length for secure fixture engagement Workshop execution for routine measuring tasks Repeatable end‑size verification for production control The gauge pin offers a defined measuring diameter of 10.03 mm and a declared positional accuracy of ±0.002 mm, which enables consistent go/no‑go checks and reliable reference fits on small to medium assemblies. Such a tight tolerance reduces measurement variation between operators and across batches, supporting quality control procedures and minimising rework. The compact, single‑piece design simplifies insertion into bores or locating holes and is particularly suitable where a stable reference for alignment or end‑size verification is required. Built for workshop use with durable construction Manufactured from special steel, the test pin is intended for frequent handling in production and maintenance settings. The workshop version designation highlights pragmatic choices in material and finishing that favour wear resistance and straightforward use in jigs and fixtures. The modest mass (approx. 0.1 kg) and the 50 mm overall length make the pin easy to position while retaining enough engagement depth for secure seating in through‑holes and blind bores. This balance between reach and handling supports efficient process flows on the shop floor. Practical handling and typical applications As a single test pin, this product is ideal for precise locating, end‑size checks and fixture setup during assembly and inspection tasks. The compact geometry suits applications such as checking bore diameters at final size, aligning mating parts during assembly, or serving as a master plug for in‑process verification. The simple geometry also makes the item easy to clean and inspect visually, which helps maintain measurement integrity and minimise downtime between checks. Choose Metav IndustryLine gauge pins for reliable, repeatable end‑size control — contact Metav Werkzeuge for tailored advice or to order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.A03 GTIN: 4061905063213 Manufacturer: Metav IndustryLine Core dimensions Diameter: 10.03 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Single gauge pin for end‑size verification Material: special steel Workshop execution Intended for fixture locating and alignment FAQ What tolerance does the gauge pin offer? The Gauge pin M323.A03 is manufactured to a tolerance of ±0.002 mm, suitable for close dimensional control. What material is used for this test pin? This test pin is made from special steel, specified for robustness in workshop use and frequent handling. What are the main applications for this gauge pin? Typical uses for the gauge pin include end‑size checks, fixture locating and alignment tasks during assembly and inspection. What are the exact dimensions of the pin? The Gauge pin M323.A03 has a diameter of 10.03 mm and an overall length of 50 mm. Is the pin supplied as a single item or in sets? The product is supplied as a single gauge pin; the SKU for ordering is M323.A03 and it belongs to the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.04mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Taking advantage of high repeatability (±0.002 mm) and a robust special‑steel construction, this gauge pin provides reliable end‑dimension checks with minimal handling time; supplied ready for safe transport in a protective case. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.A04 — single 10.04 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.A04 is a precision test pin designed for end‑dimension verification in workshop and metrology environments, ideal for inline checks and bench inspection tasks. ±0.002 mm accuracy for exact dimensioning 10.04 mm nominal diameter, length 50 mm Special steel construction for workshop use Reliable repeatability for end‑dimension verification The gauge pin is engineered to deliver consistent inspection results, with a declared tolerance of ±0.002 mm that supports tight end‑dimension control. Its 10.04 mm nominal diameter and 50 mm length place it in the micro measurement range, making it suitable for fine mechanical parts where short, stiff measuring members reduce bending and handling error. The compact design speeds up repetitive checks and reduces downtime: fewer adjustments are required to confirm conformity of end masses and mating bores. Workshop durability without sacrificing precision Built as a workshop‑grade test pin from special steel, the component resists wear while preserving measurement integrity over many cycles. The unit’s modest 0.1 kg mass and balanced geometry simplify handling during assembly‑line or bench inspections, and the supplied protective transport case keeps the pin safe between uses. The combination of robust material choice and concise dimensions means the instrument withstands the everyday demands of a busy shop floor while still delivering metrology‑grade results. Simple integration into inspection routines for faster throughput As a standard nominal size within common inspection sets, the pin fits established gauges and fixtures, supporting straightforward interchange and storage. The compact form factor reduces manipulation time and increases repeatability across operators. Backed by Metav’s distribution and advice, the component can be incorporated into quality‑control plans to reduce false rejects and accelerate decision making during production runs. For precise end‑dimension control and workshop reliability, contact Metav Werkzeuge to discuss the Metav IndustryLine gauge pin M323.A04 and how it can be integrated into existing inspection routines; Metav’s team in Emmerich is available by e‑mail or phone Technical data SKU: M323.A04 GTIN: 4061905064135 Brand: Metav IndustryLine Facts Nominal diameter: 10.04 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution (Werkstatt‑Ausführung) Supplied in a protective transport case Suitable for end‑dimension (endmasse) checks FAQ What tolerance does the gauge pin provide? The gauge pin offers a tolerance of ±0.002 mm, enabling precise end‑dimension verification for small components. What is the exact size and length of the pin? This test pin has a nominal diameter of 10.04 mm and a length of 50 mm, supplied under the SKU M323.A04. Is the pin suitable for daily workshop use? Yes, the Metav IndustryLine workshop execution and special‑steel construction make the pin durable enough for regular inspection duties. How is the item delivered for transport and storage? The gauge pin is supplied in a protective transport case to keep the measuring surface secure between uses. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.05 mm Gauge Pin Length 50 mm Workshop Version, Special Steel - Metav IndustryLine
A compact combination of high repeatability and robust workshop design delivers reliable locating and end‑measurement for small components; benefit from the ±0.002 mm tolerance and durable special steel, and order directly via Metav Werkzeuge or consult our specialists for fitment advice. Gauging pin M323.A05 — 10.05 mm diameter, 50 mm length (Metav IndustryLine) A gauging pin designed for precise end measurements and fixture setting in workshop metrology. Single gauge pin 10.05 mm diameter 50 mm working length for compact fixtures Tolerance ±0.002 mm for tight fits Workshop version in special steel Consistent precision for tight fits and repeatable locating The 10.05 mm diameter with a declared ±0.002 mm tolerance provides a reliable reference for end‑measurements and locating tasks where small clearances matter. The narrow tolerance class ensures that the pin functions as a repeatable datum for assembly and inspection processes, reducing rework and setup variance. Specified accuracy like this makes the component suitable for gauge blocks, fixture bores and precision checking where dimensional conformity is essential. Durable workshop design that eases day‑to‑day use Built as a workshop version from special steel, the pin balances wear resistance and handling practicality. The 50 mm length gives sufficient engagement for secure positioning without becoming awkward in compact jigs, while the individual supply format supports selective replacement or dedicated tooling fits. The robust execution is intended to tolerate frequent insertion and removal in a production environment, helping to maintain measurement stability over repeated cycles. Small‑format metrology with broad application scope Classified within the micro measuring range, this gauge pin targets fine mechanical tasks and small assemblies where precise end stops and gauge references are required. Its compact footprint and stable geometry aid quick fixturing and fast interchange in inspection benches, while the modest mass contributes to easy manual handling and minimal influence on delicate set‑ups. The combination of size, tolerance and construction supports consistent results in laboratory checks and workshop quality control alike. Contact Metav Werkzeuge for a tailored quote or technical clarification on the Metav IndustryLine M323.A05 gauging pin and ensure the right fit for workshop metrology and fixture use Technical data Article number: M323.A05 GTIN: 4061905064142 SKU: M323.A05 Label: Gauging pin, single, 10.05 mm, length 50 mm Facts Diameter: 10.05 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Supply: single item Category: gauge pins FAQ What tolerance class does this pin meet? The M323.A05 gauging pin (Metav IndustryLine) is specified with a tolerance of ±0.002 mm, suitable for tight fits and repeatable locating operations in precision fixtures. For which applications is this gauge pin intended? This precision pin is intended for end‑measurements, fixture alignment and small‑component locating in workshop metrology; the M323.A05 is well suited to inspection benches and jig set‑ups. Is the item supplied individually or as part of a set? The product is supplied as a single gauging pin; the designation indicates individual supply rather than a matched set. What is the material and construction of the pin? The M323.A05 is made from special steel and delivered in a workshop execution designed for frequent use and stable dimensional behaviour. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.06mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Reliable workshop-grade gauge that pairs ±0.002 mm tolerance with a 10.06 mm nominal diameter and a 50 mm length for repeatable end‑measure checks. Supplied as a single, robust test pin made from special steel for stable seating and consistent results; order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test Pin M323.A06 — Single Gauge Pin, Ø 10.06 mm, 50 mm Length (Metav IndustryLine) A Test Pin M323.A06 designed for precise end‑measure verification and reference checks in workshop inspection and assembly tasks. Workshop‑grade design Diameter 10.06 mm Length 50 mm Tolerance ±0.002 mm Consistent measurement performance for inspection tasks The core benefit of this gauge is measurement reliability: with a specified tolerance of ±0.002 mm, the pin provides a stable reference for end‑measure verification and dimensional spot checks. Classified in the micro range (10–100 mm), this size is ideal where compact gauges are required and where short seating lengths reduce bending and handling error. The precise tolerance supports quality control routines and helps reduce scrap by tightening pass/fail decisions on small components. Durable construction that supports repeat use Manufactured from special steel, the pin combines dimensional stability with wear resistance appropriate for repeated seating in jigs and gauges. The 50 mm length gives sufficient engagement for many end‑measure and fixture applications while remaining easy to handle in bench and jig environments. Supplied as a single unit, the device fits inspection benches, measurement fixtures and assembly gauges where a single, high‑precision reference pin is required. Practical application and workshop integration This gauge pin suits machinists, toolmakers and inspection staff who require a reliable reference for final dimensional checks, fixture alignment and end‑stop calibration. The compact design makes it straightforward to integrate into existing setups, and the single‑piece supply simplifies inventory for small runs and repairs. For technical queries about fitting the pin into dedicated fixtures or for compatibility with measurement systems, technical advice is available from Metav Werkzeuge. For precision end‑measure tasks and ordering advice, contact Metav Werkzeuge for direct ordering or technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.A06 GTIN: 4061905064159 Manufacturer: Metav IndustryLine Facts Diameter: 10.06 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Single item supply Workshop execution FAQ What is the declared accuracy of this test pin? The declared tolerance for the M323.A06 test pin is ±0.002 mm, suitable for repeatable end‑measure and reference checks. Is the gauge pin delivered with an ISO 17025 certificate? The item is not indicated as being supplied with an ISO 17025 calibration certificate; no specific calibration certificate is described in the product data. What material is used for the pin? The gauge pin is machined from special steel, selected for dimensional stability and wear resistance in workshop use. Which applications are suitable for this gauge pin? Typical uses include end‑measure verification, fixture alignment, reference stops and small‑part inspection in machining and toolroom environments. How is the product supplied and identified? The pin is supplied as a single item and is listed under SKU M323.A06 by Metav IndustryLine Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.07mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, ±0.002mm Accuracy - Metav IndustryLine
Take advantage of the combination of workshop-grade durability, tight dimensional tolerance and compact length for reliable end‑dimension checks; order the inspection item directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A07 — 10.07 mm diameter, 50 mm length (Metav IndustryLine) A precision gauge pin M323.A07 designed for accurate end‑dimension checks and routine inspection tasks in workshop environments. Workshop version for robust daily use Diameter 10.07 mm with ±0.002 mm tolerance Compact 50 mm length for confined fixtures Made from special steel for long service life Stable reference for critical dimensional control The gauge pin provides a compact, repeatable reference for end‑dimension verification and go/no‑go inspections. With a nominal diameter of 10.07 mm and a verified positional tolerance of ±0.002 mm, the pin serves as a dependable element in assembly checks and final‑size inspections. Tight tolerance values like ±0.002 mm correspond to micrometre‑level control and are especially valuable where interchangeability and repeatability are required. This level of precision minimises rework and supports consistent quality control across batch runs. Workshop‑grade construction reduces recalibration frequency Manufactured as a workshop version from special steel, the inspection pin resists deformation under regular usage and maintains its dimensional integrity during repetitive seating and extraction. The 50 mm length keeps the instrument easy to handle and to fit into compact fixtures, while the chosen material contributes to wear resistance and dimensional stability. Such characteristics reduce the need for frequent replacement and help maintain throughput in high‑turnover production environments. Integrates smoothly into inspection workflows and inventory Designed for straightforward integration, the pin is suitable for insertion into fixture bores, reference plates and simple plug‑gage arrangements for end‑dimension assessment. Clear identification simplifies stock control — GTIN 4061905064166 and SKU M323.A07 make procurement and traceability effortless within tool cabinets and inspection logs. The single‑piece format supports focused checks where a precise, known diameter is required for validating mating components or verifying end‑measurements. For dependable workshop inspection, opt for the Metav IndustryLine M323.A07 gauge pin and rely on Metav Werkzeuge’s expertise — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and supply coordination Technical Data SKU: M323.A07 GTIN: 4061905064166 ECLASS: 21170231 Facts Diameter: 10.07 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pin (single piece) Label: Prüfstift, einzeln, 10,07 mm Länge 50 mm FAQ What is the nominal diameter and tolerance of the pin? The pin has a nominal diameter of 10.07 mm with a dimensional tolerance of ±0.002 mm for fine end‑dimension verification. Is this gauge pin suitable for fixture and assembly checks? Yes, the M323.A07 gauge pin is intended for fixture seating, end‑dimension checks and routine workshop inspections where a compact, stable reference is required. What material is used for the inspection pin? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance in workshop environments. How is the product identified for stock and procurement? Identification is provided via GTIN 4061905064166 and SKU M323.A07, facilitating traceability and inventory management. Can the pin be used for go/no‑go testing? The single‑piece gauge format is suitable as a reference element in simple go/no‑go checks when combined with appropriate fixtures or mating gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.08mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from a workshop‑grade gauge pin that combines ±0.002 mm repeatability with a precise 10.08 mm diameter and a convenient 50 mm length for reliable end‑size inspection; order the part directly via Metav Werkzeuge or contact their specialists for application guidance. Gauge pin, single — 10.08 mm Ø, 50 mm length (Metav IndustryLine) Gauge pin, single, 10.08 mm length 50 mm is a compact inspection pin for end‑size verification and go/no‑go checks in mechanical workshops and metrology benches. Workshop version for robust daily use Diameter 10.08 mm for end‑size checking Tolerance ±0.002 mm for precise gauging Special steel for wear resistance and longevity Precision for repeatable end‑size checks The compact design delivers consistently high repeatability for end‑size verification. With a measured diameter of 10.08 mm and an indicated tolerance of ±0.002 mm, this inspection pin belongs to the Micro class of measuring pins (measurement range 10–100 mm), which is optimised for fine mechanical parts and short measuring faces. The narrow gauge and controlled manufacturing tolerances reduce measurement scatter, helping to avoid rework and minimise scrap rates in serial checking tasks. Engineers benefit from a tool that converts dimensional stability directly into predictable production outcomes. Built for the workshop: durability and handling advantages Constructed from special steel, the single gauge pin is intended for frequent handling in a workshop environment; the material choice emphasises wear resistance and dimensional stability under repeated contact. At a length of 50 mm, the pin provides sufficient gripping length and support for quick manual checks while remaining stiff enough to preserve straightness and surface integrity. The workshop version designation signals a balance between robustness and metrological quality, making the component suitable for bench checks, fixture validation and inline control stations. Practical integration into inspection routines As a single gauge pin in the Messstifte category, this item is straightforward to incorporate into existing control fixtures, plug gauges and reference stacks. Traceability is supported by the SKU and GTIN, which simplify inventory and inspection record keeping. The compact format allows mounting in comparison jigs or use as a reference for caliper verification, enabling fast go/no‑go decisions on the shop floor. Backed by Metav IndustryLine’s distribution and technical knowledge, the pin fits into an efficient quality workflow without complex set‑up or specialist tooling. Contact Metav Werkzeuge in Emmerich for supply and tailored application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.A08 GTIN: 4061905064548 Category: Messstifte Brand: Metav IndustryLine Facts Diameter: 10.08 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg eCl@ss: 21170231 Special features Material: Special steel Design: Single gauge pin Version: Workshop execution Label: Prüfstift, einzeln, 10,08 mm Länge 50 mm FAQ What is the primary application of this gauge pin? The gauge pin is designed for end‑size verification and plug‑gauge checks in mechanical workshops; the Metav IndustryLine gauge pin (SKU M323.A08) suits short‑range dimensional control and routine go/no‑go inspections. How accurate is the pin and what repeatability can be expected? With a stated tolerance of ±0.002 mm, the gauge pin offers high repeatability for Micro‑class measurements, making it suitable where sub‑thousandth‑of‑a‑millimetre control is required. Which materials and environments is the pin intended for? Manufactured from special steel for wear resistance, the inspection pin is intended for standard workshop environments and frequent contact use; it is marketed as a workshop‑grade component. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.09mm Gauge Pin, Single, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of high metrological precision, a robust workshop design and secure transport packaging to keep inspection routines fast and reliable; order the gauge pin M323.A09 directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.A09 — single gauge pin, Ø 10.09 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.A09 is a single precision probe intended for end‑size verification and locating tasks in workshop and inspection environments, combining compact dimensions with industrial robustness to support repeatable measurements. Precision diameter Ø 10.09 mm, tolerance ±0.002 mm 50 mm special‑steel body for robust handling Workshop‑grade design for daily use Supplied in a transport box for protection Accuracy that secures quality and reduces rework The core advantage lies in the high precision of the component: a diameter of Ø 10.09 mm with a stated tolerance of ±0.002 mm. This level of conformity ensures that simple end‑size checks and go/no‑go comparisons are decisive, so fewer ambiguous measurements occur and downstream rework is reduced. The tight tolerance supports stable quality control routines and shortens decision cycles at incoming inspection and during in‑process checks. Built for the shop floor to withstand daily handling Manufactured from special steel and offered in a workshop execution, the pin is dimensioned at 50 mm length and designed for rugged use. The short, stiff geometry gives predictable behaviour when used for locating or as a reference gauge, while the material choice balances wear resistance and machinability. Supplied in a transport box, the item is protected during storage and transit, preserving surface condition and measuring reliability for immediate use on the bench. Practical integration for efficient inspection workflows The single‑piece design simplifies handling and identification: compact format, low mass and clear traceability make set‑up and fixture changes faster. The gauge pin is suited to repetitive tasks such as end‑size verification, locating in jigs and quick dimensional checks where a repeatable datum is required. With the manufacturer SKU and GTIN available for inventory control, the component integrates easily into procurement and stock management processes, contributing to uninterrupted production routines. Contact Metav Werkzeuge for product clarification, application advice or to request delivery information for the Metav IndustryLine gauge pin M323.A09 at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M323.A09 GTIN: 4061905064555 Weight: 0.1 kg Material: special steel Diameter: 10.09 mm Length: 50 mm Tolerance: ±0.002 mm Facts Category: gauge pin (Messstifte) Execution: workshop version Packaging: supplied in transport box Special features Single gauge pin for end‑size checks Compact, stiff geometry for repeatability Suitable for fixture locating and inspection FAQ What is the exact diameter and tolerance of this gauge pin? The gauge pin M323.A09 has a diameter of 10.09 mm with a tolerance of ±0.002 mm, specified for precise end‑size verification. Which material is used for the pin? This item is made from special steel, chosen to provide a balance of wear resistance and durable handling on workshop floors. Is the pin suitable for locating and end‑size checks? Yes; the component is intended for locating and end‑size inspection tasks where a compact, repeatable datum is required. How long is the pin and how is it delivered? The pin measures 50 mm in length and is supplied in a transport box to protect the surface during storage and shipment. Can the pin be integrated into inventory and inspection workflows? The gauge pin M323.A09 is delivered with manufacturer identification (GTIN and article number) for straightforward inventory control and rapid integration into inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.11mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise end‑measurement capability and robust workshop design to speed up setup and reduce rework. With a nominal diameter of 10.11 mm and a tolerance of ±0.002 mm, this inspection pin offers repeatable checks for small components; order via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 10.11 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single 10.11 mm Ø, 50 mm length is a workshop‑grade inspection pin intended for precise end‑measure and plug‑checking tasks in fine mechanical and toolroom environments. Workshop version for daily use Nominal diameter 10.11 mm, length 50 mm High precision with ±0.002 mm tolerance Supplied in protective transport case Precision for micro‑scale measurements that can be trusted This inspection pin is designed for the micro range (measurement extent around 10.11 mm), where compact geometry and low bending are decisive. The tight ±0.002 mm tolerance positions the pin in the high‑precision category, making it suitable for fine gauging, small fixture validation and component end‑measures in watchmaking, sensor housings and micro‑assemblies. The small nominal diameter and short shank reduce deflection and support repeatable go/no‑go decisions, which shortens inspection cycles and lowers scrap rates. Built for workshop handling and long service life The workshop specification emphasises durability without sacrificing tactile control. With a 50 mm usable length and a mass of approximately 0.1 kg, the pin balances manoeuvrability and stability for frequent handling on the shop floor. Manufactured from special steel, the component offers wear resistance under regular use; the supplied protective transport case reduces the risk of transport damage and keeps reference dimensions intact between uses. The practical design lowers downtime for replacements and keeps calibration intervals predictable. Integrates into inspection processes and fixture tooling As a dedicated inspection pin, the unit supports efficient fixture checks and routine measurement workflows. Measurable benefits include faster setup of small tooling, consistent reference for plug‑gauging, and reduced operator variability when used alongside calibrated reference pieces. The item marked here as the Metav IndustryLine gauge pin is compatible with standard inspection jigs and fits compact slots and bores where stability and exact diameter are required. Documented tolerances assist in quality records and help maintain repeatable measurement outcomes. Contact Metav Werkzeuge for application guidance or to secure the Metav IndustryLine gauge pin: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.A11 GTIN: 4061905064579 Manufacturer: Metav IndustryLine Facts Diameter: 10.11 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Protective transport case included FAQ What applications are suitable for this inspection pin? This gauge pin is intended for end‑measure checks, plug‑gauging and fixture validation where a nominal 10.11 mm diameter is required; it is suitable for fine mechanical assemblies and small bore inspections. What level of accuracy does the pin provide? The pin is specified with a tolerance of ±0.002 mm, which supports high‑precision inspection tasks and repeatable go/no‑go assessments. What material is used and how durable is the pin? Manufactured from special steel, the pin is designed for workshop durability and regular handling; proper storage in the protective case prolongs service life. Is a protective case supplied? Yes, the item is supplied with a protective transport case to prevent damage during storage and transit. Can the pin be integrated into existing gauges and fixtures? Yes, the M323.A11 gauge pin is compatible with standard small‑bore fixtures and plug‑gauging setups used in precision inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.14mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of a compact workshop-grade test pin that combines tight dimensional control, robust special steel construction and a ±0.002 mm tolerance for reliable end measurements; order directly via Metav Werkzeuge or contact our consultants for application guidance. Gauge pin M323.A14 — single 10.14 mm, 50 mm length (Metav IndustryLine) A Gauge pin M323.A14 designed for precise end‑measurement and bore verification in workshop metrology, presented as a single, workshop‑grade test pin for production and inspection tasks. Workshop version for robust daily use Diameter 10.14 mm, precision ±0.002 Length 50 mm, hardened special steel Supplied individually for one-off checks Dependable, workshop‑grade construction that reduces rework The workshop execution of this test pin is intended to withstand repetitive use on the shop floor while maintaining dimensional stability. Manufactured from special steel and finished for inspection use, the pin offers a 10.14 mm nominal diameter with a fine ±0.002 mm tolerance that supports repeatable plug and bore checks. This combination of material selection and narrow tolerance reduces the likelihood of marginal fits and downstream rework, improving throughput in production and inspection processes. Precision that makes production control more reliable Measured control points such as end dimensions and bore diameters require components with predictable behaviour; the narrow tolerance of this pin directly supports those quality objectives. With a working length of 50 mm, the pin is long enough for many common bore depths while remaining stiff for accurate alignment in gauges and fixtures. The result is a practical instrument for statistical process control and incoming inspection, where numerical certainty helps reduce false rejects and supports faster decision‑making on the shop floor. Simple handling, clear function and broad workshop applications Delivered individually for straightforward inventory and immediate use, the test pin is suited to manual inspection benches, fixture setup and go/no‑go verifications on production lines. The workshop version prioritises durability and ease of handling: short setup times, straightforward interchangeability with other gauge pins and uncomplicated storage make it a pragmatic choice for maintenance and quality teams. Its compact dimensions also mean minimal interference in confined fixtures and straightforward integration into existing inspection procedures. For application advice or to procure Metav IndustryLine gauge pins, contact Metav Werkzeuge GmbH in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations and fast supply Technical data Article number: M323.A14 GTIN: 4061905065149 Brand: Metav IndustryLine Label: Gauge pin, single, 10.14 mm length 50 mm Facts Diameter: 10.14 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Supplied individually Material: special steel Application: end measurements / bore verification FAQ What is the primary use of this gauge pin? The gauge pin M323.A14 is intended for end measurement and bore verification in workshop metrology and inspection routines. Which tolerance class does the pin adhere to? The test pin is manufactured to a tolerance of ±0.002 mm, providing fine dimensional control for precision checks. Is the material suitable for routine shop‑floor use? Yes, the pin is made from special steel and presented in a workshop execution intended for repeated handling and regular inspection tasks. Can this pin be integrated into gauges and fixtures? The 50 mm length and standard diameter make the pin suitable for use in common fixtures, plug gauges and inspection jigs. How is the pin supplied and identified? The item is supplied individually and can be identified by Article number M323.A14 and GTIN 4061905065149. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.15mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of workshop-grade robustness combined with micrometric accuracy and compact reach to ensure reliable end‑measurement and repeatable inspection cycles; order directly via Metav Werkzeuge or request tailored advice from our consultants. Gauge pin, single 10.15 mm — 50 mm length (Metav IndustryLine) Gauge pin, single 10.15 mm — a hardened inspection pin for end measurements and go/no‑go checks in workshop environments Workshop version for robust everyday use Diameter precisely 10.15 mm for end measurements Length 50 mm for access to recessed bores High repeatability with ±0.002 mm tolerance Precision where it matters The inspection pin is engineered for reliable end‑measurement in production and maintenance. Its nominal diameter of 10.15 mm and a specified accuracy of ±0.002 mm make it suitable for gauging small bores, verifying fits and confirming final shaft diameters. The compact design and hardened shaft reduce elastic deflection during contact, which improves repeatability compared with softer or longer pins. This level of dimensional control supports efficient quality routines and reduces the need for repeated checks. Built for workshop environments Designed as a workshop version, the pin combines a special steel construction with surface treatments that resist wear during frequent handling. The 50 mm length offers enough reach for recessed measurements while remaining easy to manipulate by hand or with simple fixtures. Robust machining and a grounded seating face ensure consistent contact geometry, so measurement deviations due to seating error are minimised. The practical build suits everyday inspection tasks on production lines and in toolrooms. Practical benefits and handling Using a dedicated inspection pin streamlines checks during setup and routine inspection: the defined diameter provides a quick physical reference for go/no‑go decisions and end‑dimension verification. Where traceable records are required, the item can be logged by SKU and GTIN for inventory and calibration schedules. The compact mass and conservative length lower the risk of tipping or misalignment, which helps maintain the stated ±0.002 mm performance in workshop conditions. Secure workshop‑grade precision from Metav IndustryLine — contact Metav Werkzeuge for procurement advice or to confirm suitability for specific inspection tasks at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.A15 GTIN: 4061905062292 SKU: M323.A15 Facts Diameter: 10.15 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: special steel Version: workshop execution Category: gauge pin / inspection pin FAQ What diameter does the gauge pin have? The gauge pin from Metav IndustryLine is specified at 10.15 mm diameter for precise end‑measurement tasks. Is the pin suitable for recessed bore checks? Yes. The 50 mm length provides reach into moderately recessed bores while preserving stability for accurate checks. What accuracy can be expected during routine use? The inspection pin carries a stated repeatability of ±0.002 mm, making it appropriate for fine workshop gauging and end‑dimension verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.16mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
A compact inspection solution that combines 10.16 mm nominal diameter with a tight ±0.002 mm fit for repeatable end‑dimension checks; robust workshop construction and 50 mm length keep handling and alignment simple. Order the gauge pin directly via Metav Werkzeuge or consult their specialists for application guidance. Gauge pin M323.A16 — single 10.16 mm test pin, 50 mm length (Metav IndustryLine) The gauge pin M323.A16 is a single inspection pin intended for precise end‑measure verification and go/no‑go checks in workshop and inspection environments. Single gauge pin, 10.16 mm diameter 50 mm length for deeper bore checks Special steel, workshop execution Tolerance ±0.002 mm for tight inspection Consistent measurement where it matters The compact inspection pin delivers a 10.16 mm nominal diameter with a verified ±0.002 mm manufacturing tolerance, which translates to dependable repeatability in routine checks. Such tight dimensional control is especially valuable when verifying bore diameters, assembly fits or end‑dimensions on turned components. The small form factor reduces the risk of bending during insertion, while the specified tolerance supports traceable acceptance criteria in quality documentation. Durable design for workshop use Manufactured from special steel and specified as a workshop execution, this test pin tolerates regular handling and quick verification workflows. A 50 mm working length allows access into moderately deep bores without compromising stiffness, and the controlled surface finish minimises marking on precision parts. The straightforward single‑piece design simplifies cleaning and eliminates moving parts, making it practical for high‑frequency inspections on the shop floor. Practical integration into inspection routines As a dedicated inspection tool, the pin is suitable for quick go/no‑go assessments, end‑measure comparisons and as a reference for optical or tactile setups. The modest mass and compact size make it easy to store alongside inspection kits or to incorporate into fixture checks. Identification by SKU (M323.A16) and GTIN supports inventory control and ensures the exact tool specification is ordered and recorded for quality records. Contact Metav Werkzeuge to confirm compatibility with existing inspection procedures or to discuss delivery and availability of the Metav IndustryLine gauge pin M323.A16 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: M323.A16 GTIN: 4061905062308 Label: Gauge pin, single, 10.16 mm diameter, length 50 mm Category: Gauge pins (Messstifte) Manufacturer: Metav IndustryLine Facts Diameter: 10.16 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Single, solid test pin construction FAQ What are the nominal diameter and length of this gauge pin? The gauge pin (M323.A16) has a nominal diameter of 10.16 mm and a working length of 50 mm, suitable for standard bore verification tasks. How precise is the inspection pin for dimensional checks? The Metav IndustryLine gauge pin M323.A16 is produced with a tolerance of ±0.002 mm, providing the tight control required for repeatable end‑measure inspections. Which material is used for this pin and what does that mean for workshop use? Made from special steel, the pin is specified in a workshop execution that balances wear resistance and handling robustness for frequent use on the shop floor. Can this pin be used for go/no‑go testing in assembly controls? Yes; as a single, solid inspection pin the M323.A16 is suitable for quick go/no‑go assessments, locating checks and reference comparisons within production and inspection workflows. How is the item identified for stock and traceability? Identification is via SKU M323.A16 and GTIN 4061905062308, which supports accurate ordering and integration into inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.18mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
A workshop-grade gauge pin in 10.18 mm diameter and 50 mm length offers tight repeatability and industrial robustness; with a declared tolerance of ±0.002 mm and manufacture from special steel, it supports reliable end‑measurement and inspection tasks. Order this item directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 10.18 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single for precise end‑measurement and reference checks in workshop and inspection environments Workshop version construction Diameter 10.18 mm for end‑measure checks Tolerance ±0.002 mm for repeatable results Supplied in a transport case Precise sizing for repeatable end‑measurements The pin is manufactured to a nominal diameter of 10.18 mm with a length of 50 mm, delivering a clearly defined reference for end‑measure and fit checks. The declared accuracy of ±0.002 mm means that the pin can serve as a reliable go/no‑go datum when verifying small bores, pins or mating parts; the narrow tolerance reduces measurement scatter and lowers the risk of false rejects. Classified in the micro range (10–100 mm), this format is optimised for fine mechanical assemblies where short gauge lengths help maintain stiffness and minimise bending during probing. Robust material and workshop suitability Made from special steel, the pin is engineered for stable geometry under regular use, offering wear resistance and dimensional stability that sustain repeatable measurements over time. The workshop version specification prioritises resilience to handling and everyday use rather than purely cosmetic finish, so the component remains a dependable reference in production and maintenance environments. Supplied in a transport case, the pin is protected during storage and transport, reducing the likelihood of dings that could compromise accuracy. Practical handling and inspection benefits Compact mass and straightforward geometry make this gauge pin quick to deploy during inspection routines; the modest weight supports easy manual handling while the defined diameter simplifies visual alignment in jigs and fixtures. The simple form factor speeds routine checks and reduces cycle time in small‑part inspection workflows, contributing to consistent throughput and measurable efficiency gains. Confidence in dimensional checks is improved by the combination of tight tolerance and durable material, which together lower rework and support reliable quality control. For application guidance or to request the Metav IndustryLine gauge pin (SKU M323.A18) with transport case, contact Metav Werkzeuge for a tailored recommendation and procurement assistance Technical data Article number: M323.A18 GTIN: 4061905062858 Label: Gauge pin, single, 10.18 mm length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 10.18 mm Length: 50 mm Weight: 0.10 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop execution Supplied in transport case Category: gauge pins FAQ What material is the pin made from? The pin is made from special steel, chosen for dimensional stability and wear resistance appropriate to workshop use. What tolerance does the pin offer for measurement work? The pin is specified with a tolerance of ±0.002 mm, providing high repeatability for end‑measurement and fit verification. Is a transport case included with the pin? Yes, the item is supplied in a transport case to protect the gauge pin during storage and handling. Which applications suit this gauge pin best? The pin is intended for end‑measurement, reference checking and fit control in fine mechanical and workshop inspection tasks; its dimensions place it in the micro range for small components. What is the article number or SKU for ordering? The SKU for this gauge pin is M323.A18, which can be used for ordering and identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.19mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of a compact, workshop-grade measuring pin that combines high precision and robust handling: the 10.19 mm diameter with a verified ±0.002 mm form accuracy and a 50 mm overall length supports reliable end-measurement checks and fixture setting. Order the gauge pin directly via Metav Werkzeuge or contact our advisors for specification matching. Gauge pin, single, 10.19 mm — length 50 mm (Metav IndustryLine) Gauge pin for precise end-measurement checks and fixture setting in workshop and inspection environments Precision diameter 10.19 mm, tolerance ±0.002 50 mm overall length for workshop fixtures Made from special steel, workshop version High-precision performance that shortens inspection time The single test pin delivers repeatable results where small deviations matter: with a diameter of 10.19 mm and an indicated form accuracy of ±0.002 mm, the component is suitable for fine gaging, go/no-go assessments and alignment tasks in production and maintenance. The compact geometry minimises handling uncertainty and the tight tolerance helps reduce rework by ensuring consistent fit into mating bores and fixtures. This measurable accuracy supports rational decision-making in quality routines and in-process checks. Robust handling and compact design for everyday workshop use Built as a workshop version from special steel, this measuring pin resists routine abrasion while staying easy to manoeuvre during frequent checks. The 50 mm overall length provides enough engagement for secure seating in most jigs without excessive overhang, improving ergonomic handling during repeated measurements. The compact, single-piece supply simplifies inventory management and fast replacement, helping to keep cycle times low and setup routines efficient. Traceability and integration into inspection routines Each item carries traceable identifiers suitable for systematic stock and inspection records; the single-pin format lends itself to being recorded and swapped rapidly during quality audits. The component is classified for end-dimension checks and pairs well with standard inspection tools and fixtures used in machining and assembly work. Where process documentation and reproducibility are required, this gauge pin supports robust workflows and clear measurement records. Secure this workshop-grade gauge pin from Metav IndustryLine via Metav Werkzeuge for dependable end-measurement performance and straightforward integration into inspection routines—contact Metav Werkzeuge for ordering assistance and technical advice. Technical data Article number: M323.A19 GTIN: 4061905062865 Manufacturer: Metav IndustryLine SKU: M323.A19 Facts Diameter: 10.19 mm Length overall: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg eCl@ss: 21170231 Special features Single gauge pin for end-measurement tasks Material: special steel Workshop version (Werkstatt-Ausführung) Intended use: end measurements (endmasse) FAQ What accuracy can be expected from this gauge pin? The gauge pin from Metav IndustryLine is specified with an accuracy of ±0.002 mm, making the M323.A19 suitable for precise end-measurement and inspection tasks. Which material is used for the pin and why does it matter? The pin is made from special steel, selected for wear resistance and stable dimensions under normal workshop conditions; this supports repeatable measurements in routine inspection work. Is the pin supplied as a single item or in sets? The product is supplied as a single gauge pin (SKU M323.A19), which simplifies replacement and inventory control for specific bore checks. Can this pin be used for fixture alignment and go/no-go checks? Yes, the diameter of 10.19 mm and the tight tolerance make it suitable for fixture setting, go/no-go assessments and general end-dimension verification in machining and assembly environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.1mm Gauge Pin Length 50mm Workshop Finish, Special Steel ±0.002 - Metav IndustryLine
Take advantage of the combination of high geometric accuracy, robust special-steel construction and compact handling for reliable end-dimension checks in workshop environments; order directly via Metav Werkzeuge or request application advice from our consultants. Gauge pin, single, 10.10 mm Ø, 50 mm length — Metav IndustryLine Gauge pin, single, 10.10 mm Ø, 50 mm length is a compact inspection pin designed for precise end-dimension checks, fixture setting and verification tasks in workshop and production environments Gauge pin Ø 10.10 mm, length 50 mm Precision tolerance ±0.002 mm Special steel, workshop version Single-piece test pin, compact format Consistent geometric precision for routine inspection The gauge pin delivers repeatable dimensional reference thanks to a certified manufacturing tolerance of ±0.002 mm, which places it in the range required for fine inspection and go/no‑go verification tasks. A nominal diameter of 10.10 mm combined with the 50 mm shank provides a stable insertion length for bore checks and jig setting, reducing measurement ambiguity. The stated tolerance should be considered when comparing to specification limits and when integrating the pin into inspection sequences; the compact form preserves concentricity and limits runout on short‑reach checks. Robust construction matched to workshop use Machined from special steel, the component is finished for workshop conditions and listed as a workshop version. This material choice yields a balance between wear resistance and machinability, which suits repetitive insertion and alignment tasks at the bench or on assembly lines. The single‑piece design minimises handling complexity and supports fast cycle checks. Where environment or surface protection matters, surface condition and handling routines influence service life; storing the pin in an organised system retains measurement quality over many operations. Practical integration and handling benefits Marked as SKU M323.A10, the compact format simplifies integration into existing test rigs, fixture bores and manual inspection trays. With a modest weight of 0.1 kg and a straight cylindrical geometry, the pin is easy to orient, index and position for quick repeat measurements. Use cases include end‑dimension verification, setting reference points in jigs and trial fitting for assembly runs. The product’s workshop orientation supports frequent use without complex maintenance procedures, while the precise geometry reduces time spent on corrective adjustments during setup. Contact Metav Werkzeuge today for application-specific recommendations or to reserve the M323.A10 gauge pin for your inspection setup — Metav’s team in Emmerich provides technical advice and fast supply for industrial metrology needs. Technical data Article number: M323.A10 GTIN: 4061905064562 Label: Prüfstift, einzeln, 10,10 mm Länge 50 mm Brand: Metav IndustryLine Numbers / Core technical data Diameter: 10.10 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop version Category: Gauge pins ECLASS: 21170231 FAQ What are the exact dimensions of this gauge pin? The gauge pin has a nominal diameter of 10.10 mm and a length of 50 mm; it is supplied under SKU M323.A10 for clear identification. What tolerance does the pin meet? Manufacturing tolerance is ±0.002 mm, providing the geometric consistency required for fine inspection and fixture setting. Which material is used for this test pin? The pin is machined from special steel and offered in a workshop version suitable for repeated use in production environments. For which tasks is this gauge pin suitable? Typical applications include end‑dimension verification, bore checking, jig and fixture setting, and trial fitting during assembly or quality checks. Is the pin delivered as a single item or part of a set? This entry describes the single test pin supplied individually under SKU M323.A10 by Metav IndustryLine. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.21mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact, workshop‑grade test pin that combines high repeatability and robust material for reliable end‑dimension checks; its precise tolerance and compact 50 mm length support fast in‑process gauging. Order the M323.A21 gauge pin directly via Metav Werkzeuge or ask the consultants if guidance is needed. M323.A21 gauge pin (single) — 10.21 mm diameter, 50 mm length (Metav IndustryLine) The M323.A21 gauge pin is a single precision test pin for end‑dimension verification and plug gauging in workshop inspection and quality control settings. Workshop‑grade execution Diameter 10.21 mm precision 50 mm length in special steel Tolerance ±0.002 mm Consistent end‑dimension verification for production use The M323.A21 serves as a compact, high‑precision checking pin for repetitive end‑dimension measurements and go/no‑go tests. With a certified dimensional tolerance of ±0.002 mm, the pin ensures tight repeatability in short‑run inspection routines and assembly checks; this reduces measurement uncertainty and supports clear pass/fail decisions on the shop floor. The small footprint and controlled geometry make it suitable for fixture use and quick verification of bore or shaft ends. Built for everyday workshop handling and transport Manufactured from special steel in a workshop execution, the pin resists wear while keeping surface integrity for repeated contact checking. At 50 mm length the component balances handling convenience with sufficient engagement depth for reliable contact. Delivery in a transport case protects the gauge during storage and transit, maintaining calibration state and surface condition. The compact weight and robust construction aid fast tool changes and simple insertion into gauging fixtures. Integrates into quality processes and inspection stations The pin is ideal for end‑measure applications and plug gauging where repeatability and traceability are required. Its precise diameter and tight tolerance facilitate statistical process control inputs and reduce false rejects in incoming or in‑process sampling. Lab‑style stability combined with practical workshop design makes this test pin a pragmatic choice for machinists, inspection technicians and maintenance teams seeking predictable measurement outcomes with minimal setup time. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to discuss suitability and procurement of the M323.A21 gauge pin for your inspection routines. Technical data SKU: M323.A21 GTIN: 4061905063381 Brand: Metav IndustryLine Diameter: 10.21 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Material: special steel Version: workshop execution Delivery: transport case for protection Application: end‑dimension checks, plug gauging FAQ What is the intended use of this gauge pin? The M323.A21 gauge pin is designed for end‑dimension verification and plug gauging in workshop inspection and quality control environments. How precise is the M323.A21 for repeatable checks? The test pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for short‑range inspection tasks. What material and protection are provided with the pin? The pin is made from special steel in a workshop execution and is supplied in a transport case to preserve surface condition and dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.24mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Reliable workshop‑grade gauge pin with a 10.24 mm diameter and a tight ±0.002 mm tolerance for repeatable reference and Go/No‑Go checks. Benefit from the special steel construction and a 50 mm length that ensures secure engagement and long service life; supplied in a protective transport box for safe handling. Order the gauge pin through Metav Werkzeuge or contact their consultants for application advice. Gauge pin, single — 10.24 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single, 10.24 mm length 50 mm is a workshop‑grade precision plug intended for reference measurements, fit checks and small‑bore inspection tasks in manufacturing and inspection stations. Workshop version for robust handling Diameter 10.24 mm, tolerance ±0.002 mm Length 50 mm in special steel Supplied in protective transport box Accuracy for repeatable reference measurements The pin is manufactured to a defined diameter of 10.24 mm with a verified tolerance of ±0.002 mm, which translates into consistent, repeatable fit-control performance across inspection cycles. Such nominal accuracy reduces uncertainty when establishing reference fits or checking bore diameters, so production decisions can be made on a factual basis. The tight tolerance and hardened finish minimise wear on mating surfaces and help preserve measurement integrity over time. Built for workshop use and straightforward handling Designed as a workshop version, the plug combines a practical 50 mm engagement length with the resilience of special steel, offering a balance between stiffness and manoeuvrability. The compact mass (0.1 kg) and familiar round geometry support rapid positioning during inspection, while the robust material choice delivers resistance to deformation and abrasion. Delivery in a protective transport box ensures the gauge arrives ready for use and remains protected in daily circulation. Supply reliability and fitment guidance As a component in Metav IndustryLine, this gauge pin is traceable via SKU and GTIN for easy inventory and procurement. The simple geometry makes it suitable for routine assembly checks, incoming inspection or jig validation where a precise cylindrical reference is required. For application‑specific guidance — for example, recommended pairing with bore gauges or plug sets — Metav’s consultancy can advise on compatible fixtures and handling practices to maximise service life and measurement confidence. Contact Metav Werkzeuge for tailored application advice or to secure the Metav IndustryLine gauge pin M323.A24 (10.24 mm diameter) for dependable workshop inspections — Metav Werkzeuge GmbH in Emmerich is available to assist with specifications and supply. Technical data Article number: M323.A24 GTIN: 4061905063411 Label: Gauge pin, single, 10.24 mm length 50 mm Manufacturer: Metav IndustryLine Specifications Diameter: 10.24 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Supplied in transport box FAQ What is the declared diameter and tolerance of the pin? The gauge pin M323.A24 is specified at 10.24 mm with a manufacturing tolerance of ±0.002 mm. Is the pin supplied ready for use and protected in transit? Yes. The Metav IndustryLine gauge pin is supplied in a protective transport box to prevent damage during transport and storage. For which tasks is this pin typically used? This type of precision plug is used for reference measurements, bore fit checks and quick Go/No‑Go verifications in workshop and inspection settings. Can the gauge pin be used for repeatability checks on small bores? Yes. With its tight tolerance and stable material, the pin is suitable for repeatability and fit-control tasks on small‑bore components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.25mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, sub‑micrometre tolerance, and robust workshop design for reliable end‑dimension checks; order the precision gauge pin directly via Metav Werkzeuge or consult the technical advisers if required. Precision gauge pin, 10.25 mm Ø — 50 mm length (Metav IndustryLine) Precision gauge pin, 10.25 mm diameter and 50 mm length for end‑dimension verification and fixture alignment in workshop and production environments Workshop‑grade construction Diameter 10.25 mm, length 50 mm Tolerance ±0.002 mm Special steel for durable service Dependable control for routine inspection tasks The compact gauge pin delivers consistent dimensional reference for assembly checks, go/no‑go tests and fixture setups. With a nominal diameter of 10.25 mm and a shank of 50 mm, it suits short‑reach applications where a stable datum point is required. The fine tolerance of ±0.002 mm reduces measurement scatter and shortens inspection loops, which supports faster throughput on production lines and fewer reworks. Robust materials and practical workshop design Manufactured from special steel, the pin resists wear in repeated insertions and provides a reliable contact surface for gauges and fixture bores. The workshop‑oriented construction balances hardness with surface finish to ensure longevity without compromising fit. Corrosion protection and a smooth ground surface assist in repeatable seating, which improves repeatability across successive measurements and simplifies quality assurance routines. Fast integration into metrology and assembly processes The pin is intended as a single‑piece testing element and integrates easily into test rigs, jigs and manual inspection benches. Its dimensions place it in the micro gauge category for compact metrology aids, making it suitable for fine mechanical assemblies and small‑part production. Using a standardised gauge pin like this one helps to align inspection results between workstations and reduces variation introduced by informal reference tools. Choose the Metav IndustryLine precision gauge pin for reliable end‑dimension checks and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.A25 GTIN: 4061905063428 Label: Prüfstift, einzeln, 10,25 mm Länge 50 mm Facts Diameter: 10.25 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Category: Micro gauge pin (10–100 mm range) Single test pin FAQ What tolerance can be expected from this gauge pin? The precision gauge pin (Metav IndustryLine, M323.A25) is specified with a tolerance of ±0.002 mm, suitable for tight workshop and inspection requirements. Which materials is the pin suitable for contacting? The pin is made from special steel and is intended as a non‑cutting reference element for contact with common engineered materials during measurement and alignment tasks. Can the pin be used in fixture alignment and assembly checks? Yes. The 10.25 mm diameter and 50 mm length make the test pin ideal for fixture set‑up, assembly verification and repeatable bore checking in small components. How does this pin support repeatability in production checks? Using a hardened, ground reference such as this pin ensures consistent seating and contact geometry, which reduces measurement scatter and improves repeatability across inspections. Is this item suitable for fine mechanical and watchmaking tasks? Classified within the micro gauge range, the pin is designed for compact metrology duties and fine mechanical work where a short, rigid reference is advantageous. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.26mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact precision tool with Ø 10.26 mm diameter, 50 mm length and accuracy ±0.002 mm for reliable fit checks and end‑measurement tasks; order the pin directly via Metav Werkzeuge or consult the team for batch supply and application advice. Gauge pin M323.A26 — single test pin, Ø 10.26 mm, 50 mm length The gauge pin M323.A26 is a precision test pin designed for workshop use, ideal for checking bore fits, end measurements and small mechanical components where compactness and repeatability matter Workshop execution for durable handling Precision diameter Ø 10.26 mm, tolerance ±0.002 50 mm overall length for compact inspections Made from hardened special steel Reliable fit checks for small components The compact design delivers a dependable reference for go/no‑go and clearance inspections. With a nominal Ø 10.26 mm and a short 50 mm overall length, this test pin is classified in the micro range for measuring tools — the preferred category for fine mechanical and small‑part work. The geometry and workshop specification ensure low flex and secure seating in jigs or bore checks, so the result is a consistent comparative measurement rather than a subjective estimate. Designed for repeatable precision and inspection throughput A stated accuracy of ±0.002 mm positions this pin for use in demanding measurement tasks where small deviations matter. The tight tolerance reduces rework and speeds decision making on production lines and inspection benches, contributing to measurable efficiency gains. Hardening and the choice of special steel maintain a stable contact surface, which helps preserve dimensional integrity over repeated cycles and ensures reproducible results from one inspection to the next. Material choice and handling benefits Constructed from special steel and supplied as a single test pin, this item balances wear resistance with the handling convenience expected in busy workshops. The short length lowers the moment arm during insertion and removal, making manual handling more controlled and reducing the risk of accidental bending. For inspection routines that demand a compact reference artefact, the combination of material and design supports longevity and consistent surface contact. How it fits into inspection workflows As a single‑piece gauge pin with a clear nominal diameter, the item integrates easily into existing test fixtures and bench procedures. It serves as a straightforward reference for bore gauges, micrometres and comparators when establishing end measurements or checking mating parts. The compact format is particularly useful where space is limited but repeatable, traceable checks are required, such as toolrooms, small‑batch production and maintenance inspections. Contact Metav Werkzeuge for specification advice and supply of the Metav IndustryLine gauge pin M323.A26 and ensure compatibility with existing inspection systems Technical Data Article number: M323.A26 GTIN: 4061905063435 Category: Messstifte (gauge pins) Label: Prüfstift, einzeln, 10,26 mm Länge 50 mm Facts Diameter: 10.26 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: special steel Workshop execution Single test pin SKU: M323.A26 FAQ What applications suit this gauge pin best? The gauge pin M323.A26 is intended for bore checks, end‑measure verification and small‑part fit inspection in workshop and toolroom environments where compact, repeatable references are required. How precise is the nominal diameter and what does ±0.002 mm mean in practice? The nominal Ø 10.26 mm is manufactured with a tolerance of ±0.002 mm, which denotes the maximum deviation allowed from the stated diameter during production; this level of precision supports tight fit assessments and reduces measurement uncertainty in comparative checks. Is the material suitable for repeated contact and light wear? Yes — the pin is made from special steel chosen for surface stability and wear resistance, making it suitable for repeated insertion into bores and use in inspection routines without rapid degradation. Can the pin be used in measuring fixtures and jigs? The compact 50 mm length and micro‑range diameter make the pin compatible with inspection fixtures and jigs designed for small components, ensuring stable seating and repeatable reference points. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.27mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Combining high repeatability (±0.002 mm), a compact 10.27 mm diameter and a robust 50 mm length, this inspection pin delivers dependable end‑measure checks in a small footprint; its workshop construction supports routine use on production benches. Order the gauge pin M323.A27 directly via Metav Werkzeuge or ask our consultants if needed. M323.A27 Gauge pin — single 10.27 mm diameter, 50 mm length (Metav IndustryLine) M323.A27 is a single inspection pin designed for precise end‑measure verification in workshop and small‑parts inspection applications. Compact 10.27 mm diameter for fine checks 50 mm length for deep reach Workshop version, sturdy construction High precision: ±0.002 mm tolerance Precision where small tolerances count The inspection pin is crafted for situations that require consistent, traceable end‑measure checks. With a nominal diameter of 10.27 mm and a supplied tolerance of ±0.002 mm, the pin supports tight quality control limits typical in component inspection and gauge setting. The compact geometry reduces the risk of bending or play during insertion, which improves repeatability compared with longer, slimmer pins. For manufacturers and quality technicians, this means fewer measurement rechecks and a clearer pass/fail decision at the inspection stage. Designed for everyday workshop use Built as a workshop version in special steel, the pin balances wear resistance with machinability so that routine use on production floors is practical. The 50 mm length provides sufficient reach for many internal and end‑face checks while remaining easy to handle by a single operator. Delivery in a transport box ensures the tool remains protected during storage and transit, reducing damage risk and downtime. These practical design choices translate into straightforward handling, lower maintenance effort and consistent measurement outcomes under normal workshop conditions. Integration into inspection routines and benefits The gauge pin is intended as a straightforward inspection aid for end‑measure and plug‑gauge tasks. Classified within the micro range (10–100 mm), it complements bench gauges and small fixture tooling, contributing to faster setup and more reliable in‑process checks. The robust tolerance specification supports statistical process control by reducing measurement uncertainty at the operator level, while the compact format helps when access is restricted. For procurement and workshop managers, the combination of precision, durability and compactness supports a measurable increase in inspection throughput and confidence. For precise end‑measure checks, request the Metav IndustryLine gauge pin M323.A27 from Metav Werkzeuge — contact the Emmerich team for ordering and tailored technical advice. Technical data Article number: M323.A27 GTIN: 4061905063442 Label: Gauge pin, single, Ø 10.27 mm, length 50 mm Facts Diameter: 10.27 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Delivered in transport box Classification: micro range (10–100 mm) FAQ What applications suit this inspection pin? This inspection pin M323.A27 is intended for end‑measure verification, plug checks and small‑part inspection in workshop and production environments. Is the pin suitable for high‑volume routine use? Yes, the workshop construction and special steel composition make the M323.A27 appropriate for frequent, routine checks under normal production conditions. How accurate is the gauge pin for quality control tasks? The gauge pin is specified to ±0.002 mm, providing the precision needed for tight tolerances in small‑component inspection. Does the delivery include protective packaging? The M323.A27 is supplied in a transport box to protect the pin during storage and shipment. Can this pin be used with existing plug‑gauge fixtures? The compact 10.27 mm diameter and standard length make the M323.A27 compatible with many bench fixtures and small plug‑gauge setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com