Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
17.02mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of a 17.02 mm gauge pin with ±0.002 mm tolerance and a robust 50 mm shank to secure repeatable end-measure checks and minimise rework. The combination of a precise diameter, workshop-grade construction and compact length supports reliable in-process gauging; order the part directly via Metav Werkzeuge or consult the technical team for specification matching. Gauge pin M323.H02 — single gauge pin, 17.02 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.H02 is a single end-measure pin designed for accurate bore and fit testing in routine workshop inspection tasks. Workshop design for everyday inspection Diameter held to ±0.002 mm tolerance 50 mm shank for stable probing Made from special steel for wear resistance Ensure repeatable pass/fail checks with tight diameter control A precisely held 17.02 mm diameter is the defining characteristic for trustworthy plug‑style gauging. With a declared tolerance of ±0.002 mm, this item is suited to applications where consistent go/no‑go decisions and tight fits are required. The short, rigid 50 mm length reduces deflection during insertion and provides a stable contact for end‑measure tasks, translating directly into fewer measurement variations and less rework on production parts. The declared accuracy supports routine dimensional control in machining and assembly operations, where reproducible outcomes are critical. Robust material and workshop construction for daily use Constructed from special steel, the pin offers a balance between hardness and surface finish that prolongs service life under regular use. The workshop design indicates a tool built for frequent handling and inspection cycles rather than delicate laboratory-only use, making it a pragmatic choice for quality inspectors and shop floor technicians. The relatively low mass (0.15 kg) combined with the compact 50 mm shank simplifies handling while maintaining the stability needed for precise contact measurements. Simple fit into established inspection workflows Marked with SKU M323.H02 and a GTIN for inventory control, the pin integrates easily into traceable stock systems and tooling sets. Its specification suits end measurement ("endmasse") applications such as bore checking, alignment verification and fit testing of mating parts. The compact format means it can be stored alongside common workshop gauges and swapped quickly during inspection rounds, supporting efficient throughput without complex setup or extra fixtures. Choose the Metav IndustryLine gauge pin for dependable end‑measure verification and contact Metav Werkzeuge in Emmerich for delivery and specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H02 GTIN: 4061905071393 Category: Gauge pins SKU: M323.H02 Facts Diameter: 17.02 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Design: Workshop execution Intended use: End measurements (endmasse) FAQ What tolerance does this gauge pin maintain? The gauge pin M323.H02 is specified with a tolerance of ±0.002 mm for diameter control. For which tasks is this pin suitable? This pin is intended for end‑measure checks such as bore gauging, fit verification and simple pass/fail inspection in machining and assembly environments. What material is the pin made from? The pin is manufactured from special steel, giving a durable contact surface appropriate for routine workshop inspection. Is calibration status indicated for this product? Calibration status is not specified in the product data provided. Which sectors commonly use this type of gauge pin? Typical applications include general engineering, toolmaking, quality control in metalworking and production lines where repeatable dimensional checks are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.03mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Taking advantage of ±0.002 mm tolerance and a compact 50 mm overall length, this workshop-grade gauge pin combines high repeatability with robust construction for reliable end‑measurement tasks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.H03 — single precision pin, Ø 17.03 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.H03 is a single precision pin for end‑measurements and dimensional reference checks in workshop and inspection contexts. Single precision gauge pin, Ø 17.03 mm Tolerance ±0.002 mm for fine checks 50 mm overall length, workshop design Special steel construction with transport case Precision that secures quality control The gauge pin delivers a nominal diameter of 17.03 mm with a stated accuracy of ±0.002 mm, a tolerance that supports fine dimensional verification and tight process control. Such a small tolerance reduces uncertainty when checking bores, plug fits or reference gauges, enabling clear go/no‑go decisions on the shop floor. The high repeatability of the reference surface means fewer remeasurements and a more predictable inspection workflow, which is particularly valuable where component interchangeability and assembly tolerances are critical. Compact format that eases handling and alignment Classified in the Micro range (measurement range up to 100 mm), the compact 50 mm length keeps the pin rigid and easy to position in confined set‑ups. Shorter overall length minimises lever‑arm deflection, simplifying alignment in jigs and small assemblies. The workshop configuration supports repetitive checking of small parts, gauges and final dimensions where space is limited yet precision cannot be compromised. Delivered in a protective transport case, the unit is ready for secure storage and safe movement between inspection benches. Robust construction for everyday workshop use Manufactured from special steel, the pin is designed as a durable, single‑piece reference suitable for routine inspection duties. The workshop version prioritises practicality and longevity: sturdy material selection and a compact form factor make it a dependable tool for maintenance, incoming inspection and production control. Lightweight at 0.15 kg, the pin balances portability with sufficient mass to be stable during manual gauging operations, supporting consistent measurement outcomes over repeated use. Choose Metav IndustryLine precision pins for dependable end‑measurement — Metav Werkzeuge in Emmerich supplies technical details and stock information for the M323.H03 Technical Data Article number: M323.H03 GTIN: 4061905071409 Label: Prüfstift, einzeln, 17,03 mm Länge 50 mm SKU: M323.H03 Brand: Metav IndustryLine Dimensions & Weight Diameter: 17.03 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Features & Materials Material: Special steel Workshop design Delivered in transport case Single gauge pin Intended use: end measurements FAQ What accuracy can be expected from this gauge pin? The stated accuracy is ±0.002 mm; this level of precision makes the M323.H03 suitable for fine dimensional checks and repeatable reference measurements. Which applications suit this precision pin? The pin is intended for end‑measurements, bore checks and plug‑fit verifications in workshop inspection, assembly control and quality assurance tasks where compact reference gauges are required. Is the gauge pin supplied ready for transport and storage? The workshop version is supplied in a protective transport case to safeguard the reference surfaces during movement and storage. What material is the pin made from and how does that affect use? Made from special steel, the pin offers robust wear resistance appropriate for routine workshop inspection; material choice supports long‑term dimensional stability under normal use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.04 mm Gauge Pin Length 50 mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a robust workshop design combined with a precise Ø 17.04 mm measuring diameter and a tight tolerance of ±0.002 mm to ensure reproducible end‑measurements; the 50 mm overall length facilitates reliable probing in confined assemblies. Order directly via Metav Werkzeuge or consult the specialists for application advice. Test pin M323.H04 — workshop test pin, Ø 17.04 mm, 50 mm length (Metav IndustryLine) A Test Pin M323.H04 designed for precision end‑measurements and component verification in workshop metrology Workshop version for robust use Diameter Ø 17.04 mm for end‑measurements Length 50 mm for deep probing tasks Tolerance ±0.002 mm for high precision Precision for routine end‑measurement tasks The M323.H04 is engineered as a compact, micro‑range measuring pin intended for accurate end‑measurements and reference checks in production and maintenance environments. With a defined measuring diameter of Ø 17.04 mm and an overall length of 50 mm, the pin suits applications where repeatable contact geometry and short‑reach probing are required. The workshop configuration emphasises durability and straightforward handling, enabling consistent results during incoming inspection, setup checks and quick verification runs. Tight tolerance for reproducible results A declared tolerance of ±0.002 mm positions this test pin in the high‑precision segment for workshop gauges. This level of precision reduces uncertainty in comparative checks and is especially beneficial where small dimensional deviations have functional consequences. The pin is manufactured from special steel, providing dimensional stability under normal workshop conditions. Where measurement traceability is required, the component dimension and tolerance allow clear pass/fail criteria to be defined for quality control procedures. Practical handling and storage benefits Delivered in a protective transport case, the pin remains protected from damage and contamination between uses, supporting long‑term reliability. At a mass of 0.15 kg, the component is easy to manoeuvre and integrate into fixture assemblies or portable inspection sets. The compact format and workshop specification make the item suitable for technician‑level use: rapid substitution, minimal setup time and straightforward incorporation into standard testing jigs or bench fixtures. How this pin supports production reliability As part of the Metav IndustryLine, this test pin contributes to a predictable measurement workflow: consistent contact geometry, defined tolerance and durable material reduce the rate of rework and support faster go/no‑go decisions on the shopfloor. Metav’s quality filtering and broad product range ensure that the component integrates with established inspection procedures and complements existing measuring equipment in small and medium‑sized workshops alike. For workshop measurement reliability choose the Metav IndustryLine M323.H04 via Metav Werkzeuge — contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: M323.H04 Manufacturer: Metav IndustryLine GTIN: 4061905071911 Facts Diameter: 17.04 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop version Delivered in protective case Category: Test pins (Messstifte) Application: end measurements FAQ Is this test pin suitable for precision end‑measurements in a workshop environment? Yes. The M323.H04 test pin from Metav IndustryLine is designed for workshop end‑measurements, offering a defined contact diameter of 17.04 mm and a tolerance of ±0.002 mm suitable for reliable comparative checks. What materials is the pin compatible with during inspection tasks? The M323.H04 is made from special steel and is intended as a reference or contact pin rather than a machining tool; it is suitable for measuring interfaces on components manufactured from typical workshop materials. How is the pin delivered and protected during transport? The test pin is supplied in a protective transport case to prevent damage and contamination during storage and movement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.05mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-ready durability, ±0.002 mm tolerance and compact handling for reliable end-dimension verification; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.H05 — single gauge pin, Ø 17.05 mm, 50 mm length (Metav IndustryLine) A Gauge pin M323.H05 designed for precise end‑dimension checks and reference measurements in workshop and quality‑control environments. Workshop version for daily use Tolerance ±0.002 mm Special steel construction Precision that reduces rework and rejects Built for repeatable reference measurements, this gauge pin delivers a verified tolerance of ±0.002 mm, which translates into consistently tight pass/fail decisions on inspection benches. The nominal diameter 17.05 mm and length 50 mm make it suitable as a master pin for go/no‑go plug tests and for set‑up verification in small‑batch production. By converting dimensional uncertainty into a clear numerical limit, this tool supports faster quality decisions and reduces downstream rework. Robust construction for everyday workshop demands The workshop specification is reflected in a special steel construction that balances hardness with dimensional stability. The compact geometry minimises bending and handling error during insertion and removal, while the moderate mass contributes to stability without cumbersome weight. These attributes combine to provide a durable inspection artefact that withstands frequent use in machineshops, jigs and gauging fixtures, keeping inspection cycles short and dependable. Practical integration into inspection routines As an end‑dimension reference, the pin is straightforward to incorporate into existing gauges, fixture arrays and manual checks. Marked identification (SKU: M323.H05) simplifies traceability within calibration logs and process documentation. The compact format aids ergonomic handling and rapid alignment on test benches, supporting efficient throughput in small to medium‑scale quality processes while maintaining the required metrological clarity. Choose Metav IndustryLine gauge pins for consistent end‑dimension checks — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: M323.H05 GTIN: 4061905069604 Manufacturer: Metav IndustryLine Description: Gauge pin, single, Ø 17.05 mm, length 50 mm Material: Special steel Tolerance: ±0.002 mm Weight: 0.15 kg Facts Diameter: 17.05 mm Length: 50 mm Mass: 0.15 kg ECLASS: 21170231 Label: Gauge pin, single, 17.05 mm length 50 mm Special features Workshop version (robust build) Intended for end‑dimension verification Suitable as reference/master pin for plug gauging FAQ What tolerance can be expected from this gauge pin? The gauge pin delivers a nominal tolerance of ±0.002 mm, allowing tight go/no‑go evaluations and repeatable reference measurements. Is the pin suitable for use as a master in gauging fixtures? Yes — the gauge pin M323.H05 is designed for use as a master or reference pin in plug‑gauging and fixture checks where a 17.05 mm diameter is required. Which material is used for the pin and how does it affect performance? The pin is made from special steel, selected to provide dimensional stability and wear resistance for frequent workshop use. How is the part identified for traceability? The item is listed under SKU M323.H05 and GTIN 4061905069604 to support calibration records and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.06mm Gauge Pin, Single, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Benefit from ±0.002 mm repeatability, robust special steel construction and a compact 50 mm length for consistent end‑gauging in workshop and inspection setups. Order the gauge pin directly via Metav Werkzeuge or consult the team for application guidance. Gauge pin Ø 17.06 mm, length 50 mm — workshop gauge pin by Metav IndustryLine A gauge pin Ø 17.06 mm, length 50 mm for precise end‑measurements and fit checks in production and inspection environments Workshop-grade construction Special steel, wear-resistant Diameter Ø 17.06 mm precision Tolerance ±0.002 mm accuracy Precision where it matters The test pin is designed for high‑accuracy end‑gauging and reference measurements, offering a tight tolerance of ±0.002 mm that supports reliable go/no‑go checks and dimensional verification. With a nominal diameter of Ø 17.06 mm, the component is suited to fine fits and small bore inspections where repeatability and traceable tolerances are required. The numerical specification simplifies integration into inspection protocols and provides a clear basis for process capability assessments. Durable workshop construction for everyday use Manufactured in special steel with a workshop finish, the pin balances wear resistance and handling convenience for routine use at the bench or on the shop floor. The 50 mm length provides a stable insertion depth for fixtures while remaining compact enough for rapid handling and storage. The workshop execution prioritises robustness under frequent contact, so maintenance intervals are extended and measurement throughput remains steady in production environments. Integration into quality workflows and procurement Supplied as a single precision gauge pin, the component is ready for direct use in fixture checks, assembly control and bore verification. Traceability is supported by the listed identifiers and procurement data, which enable straightforward stock keeping and replacement: SKU M323.H06 and GTIN 4061905069611. The single‑piece format simplifies spares management and minimises batch variability in inspection routines, promoting consistent measurement results across shifts. For a reliable supply of Metav IndustryLine gauge pins, request a technical quote from Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Manufacturer: Metav IndustryLine Article number / SKU: M323.H06 GTIN: 4061905069611 Facts Diameter: 17.06 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop-grade execution Single piece supply Category: gauge pin / test pin FAQ What accuracy can be expected from this gauge pin? The gauge pin offers an accuracy of ±0.002 mm, making it suitable for demanding end‑gauging and fit checks where tight repeatability is required; reference SKU M323.H06 for ordering. Which material is used for the pin? This Metav IndustryLine pin is made from special steel with a workshop finish to improve wear resistance and durability under frequent use. What typical applications suit this test pin? The pin is intended for end‑measurements, bore checks and fixture verification in production and inspection workflows, where a nominal Ø 17.06 mm reference is required. Is the component supplied individually or in sets? The product is supplied as a single gauge pin (single piece); use SKU M323.H06 when specifying a replacement or spare. How can the pin be integrated into existing inspection fixtures? The compact 50 mm length and precise diameter allow direct insertion into jigs, templates and go/no‑go assemblies, enabling straightforward retrofit into quality control stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.07mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of pinpoint dimensional control and a robust workshop grade design to maintain consistent inspection results; order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.H07 – single gauge pin, Ø 17.07 mm, 50 mm length (Metav IndustryLine) The Test pin M323.H07 is a single precision gauge pin designed for end‑measure and inspection tasks in workshop and inspection environments, offering stable contact geometry for repeatable results. Precision diameter 17.07 mm Length 50 mm for confined measurements Tolerance ±0.002 mm for fine control Made from special steel for workshop use Precision that keeps production on target The core strength of this inspection pin is its dimensional fidelity: a diameter of 17.07 mm held to a tight ±0.002 mm deviation ensures that gauge checks and go/no‑go assessments remain reliable in routine quality control. Such accuracy reduces downstream rework and supports consistent batch acceptance criteria. The controlled tolerance and cylindrical form make the pin suitable for repeatable contact with reference surfaces and for use as a reference master in inspection fixtures. Robust workshop design for daily use Manufactured from special steel and specified as a workshop version, this single test pin is built to withstand regular handling and contact cycles typical of measurement benches. The 50 mm length provides reach into deeper bores or fixtures while keeping the contact area accessible; the modest mass of approximately 0.15 kg contributes to easy manual handling and fast placement in pin blocks or test jigs. The construction balances wear resistance with maintainable geometry for extended service life. Practical integration with inspection workflows Delivered as a single precision pin with an identifiable SKU and GTIN, the item fits into established pin sets, fixture pockets and bespoke test appliances where a single, high‑accuracy gauge element is required. Labelling and dimensional specification support traceability in inspection protocols, while the straightforward geometry eases repeat measurement planning. For shops maintaining comprehensive inventory control, the clear specification simplifies substitution and replenishment planning. Secure the M323.H07 from Metav Werkzeuge for dependable gauge control—contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application advice and stocking information. Technical data Article number: M323.H07 GTIN: 4061905069628 Label: Test pin, single, 17.07 mm length 50 mm Category: Gauge pins Manufacturer: Metav IndustryLine Dimensions & accuracy Diameter: 17.07 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials & features Material: Special steel Workshop version Single test pin FAQ What tolerance does the pin provide? The test pin M323.H07 is specified with a tolerance of ±0.002 mm, suitable for fine measurement control in inspection routines. What are the exact dimensions of the pin? Diameter is 17.07 mm and overall length is 50 mm for the single gauge pin, offering reach for moderate‑depth checks. What material is used for the pin and how does it perform? Constructed from special steel and supplied in a workshop grade finish, the pin offers good wear resistance and stability under frequent inspection use. Is this pin suitable for use in pin blocks and fixtures? Yes; the single precision geometry is compatible with common pin blocks and fixture pockets where a defined gauge element is required. How can the product be identified for ordering or stock control? Refer to article number M323.H07 and GTIN 4061905069628 to match the exact test pin and ensure correct replenishment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.08mm Gauge Pin Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of the combination of ±0.002 mm accuracy, a Ø17.08 mm nominal diameter and a compact 50 mm length for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if further verification is needed. Gauge pin, single, Ø17.08 mm × 50 mm — Metav IndustryLine workshop version with ±0.002 mm accuracy Gauge pin, single, Ø17.08 mm × 50 mm is a workshop‑grade inspection pin engineered for fast, repeatable verification of end dimensions and clearance gauges in routine production environments. Workshop-execution for robust use Diameter Ø17.08 mm nominal Length 50 mm for compact checks Tolerance ±0.002 mm for fine control Ensure consistent part quality with compact precision The compact design of this gauge pin provides a straightforward means of verifying end‑dimensions and plug fits without complex fixtures. With a nominal diameter of Ø17.08 mm and a measured length of 50 mm, the component is sized for tight insertion checks and quick go/no‑go trials. The specified ±0.002 mm indication describes the manufacturing deviation that can be expected from the part; in practice this level of control allows confident acceptance or rejection decisions on small to medium components where dimensional conformity is critical. The special steel construction adds stability to the contact surface and reduces the risk of rapid wear in regular use. Robust construction to reduce rework and downtime Built as a workshop‑execution item, the pin combines a hardwearing material choice with a geometry that resists deformation during handling and repeated measurement cycles. The stainless finish and dense steel core provide a balance between surface resilience and dimensional stability; this reduces the frequency of replacement and the likelihood of measurement‑induced adjustment loops on the shop floor. In applications such as batch inspection, tool set‑up validation or simple assembly checks, the compact length and consistent diameter minimise handling time and support faster throughput in production cells. Practical integration into inspection routines and fixtures The gauge pin serves as a simple reference for manual gauging and as a precision datum when mounted in jigs or test fixtures. Its compact footprint makes it suitable for confined verification points and for use in comparative checks against master gauges. Traceable identification via GTIN and SKU supports inventory control and process documentation, while the robust material choice ensures the pin holds geometry through repetitive engagement. For inspection departments seeking a cost‑effective, low‑complexity solution for end‑dimension checks, this test pin delivers reliable performance with minimal ancillary equipment. Contact Metav Werkzeuge to discuss whether the Metav IndustryLine gauge pin suits the specific inspection task and to arrange supply through our Emmerich specialists Technical Data Article number: M323.H08 GTIN: 4061905070013 SKU: M323.H08 Brand: Metav IndustryLine Material: Special steel Length: 50 mm Nominal diameter: 17.08 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special designation: Workshop version Facts Nominal diameter: 17.08 mm Length: 50 mm Manufacturing deviation: ±0.002 mm Weight: 0.15 kg GTIN: 4061905070013 Special features Single gauge pin format Suitable for end‑dimension and plug checks Robust steel construction for enhanced wear resistance Compact form for confined inspection points FAQ What tolerance does this gauge pin hold? The Metav IndustryLine gauge pin M323.H08 is manufactured to a tolerance of ±0.002 mm, enabling fine acceptance decisions in production checks. Is the pin suitable for fixture mounting? Yes. The single gauge pin format and compact 50 mm length make the M323.H08 suitable for integration into jigs and test fixtures as a reference datum. What material is used for the pin? The inspection pin is made from special steel, chosen to balance surface durability with dimensional stability under routine use. Can this pin be used for quick plug checks on production parts? Absolutely. With a nominal diameter of Ø17.08 mm and workshop execution, the M323.H08 is designed for fast go/no‑go and clearance verifications in a production environment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.09mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combining ±0.002 mm accuracy with a special steel construction and a compact Ø17.09 mm / 50 mm form, this probe pin delivers repeatable end‑measure checks in workshop environments; order the component directly via Metav Werkzeuge or contact our consultants for application guidance. Test Pin M323.H09 — Single probe pin, Ø17.09 mm, 50 mm length (Metav IndustryLine) The single Test Pin M323.H09 is a workshop‑grade inspection pin designed for end‑dimension checks and gauge fixtures in production and quality control environments. High-precision ±0.002 mm tolerance Diameter 17.09 mm, length 50 mm Special steel, workshop version Supplied as a single probe pin Precision where it matters: reliable end‑measure checks The M323.H09 is engineered for consistent, repeatable measurements in inspection and gauge assemblies. With a certified geometry of 17.09 mm diameter and a length of 50 mm, the probe pin offers a declared position tolerance of ±0.002 mm, which places it in the high‑precision bracket for workshop inspection tools. Such accuracy reduces uncertainty in go/no‑go tests and end‑measure verifications, supporting tighter production tolerances and fewer downstream reworks. The compact form factor keeps handling straightforward while maintaining the stiffness required for short‑range control tasks. Robust workshop construction for everyday use Built in a workshop version specification from special steel, this inspection pin resists routine handling and the typical rigours of shop‑floor assembly. The material choice balances hardness and toughness to prevent premature wear while keeping the surface finish suitable for contact gauges and master rings. At approximately 0.15 kg, the component is easy to position in fixtures and remains stable during short measurement cycles. The single‑piece supply format simplifies inventory management for gauge makers and maintenance departments who require individual replacement pins rather than pre‑assembled sets. Integration and traceability for production control This probe pin is aimed at quality control and fixture construction where traceable, repeatable dimensions are essential. The item is listed under SKU M323.H09 and GTIN 4061905070020, facilitating procurement and inventory traceability in ERP systems. Its geometry and tolerance make it suitable as a reference element in plug gauges, limit pins and custom inspection jigs where precise end‑measure values are required. Where necessary, Metav’s advisers can assist in matching the pin to existing gauge housings or suggesting protective housings to preserve the contact surface over long production runs. Contact Metav Werkzeuge today to discuss procurement of the M323.H09 single probe pin from Metav IndustryLine and to receive tailored advice on fitment and delivery from our Emmerich specialists Technical Data Article number: M323.H09 GTIN: 4061905070020 Category: Messstifte Facts Diameter: 17.09 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Supplied single (individual probe pin) High‑precision inspection use FAQ What tolerance does the probe pin offer? The probe pin M323.H09 is specified with a tolerance of ±0.002 mm, suitable for high‑precision end‑measure checks. Which material is used for this test pin? This inspection pin is made from special steel in a workshop configuration, optimised for durability in routine inspection tasks. Is the item supplied individually or in sets? The product is supplied as a single probe pin (single item), intended for direct replacement or individual use in gauge assemblies. What are the product identifiers for ordering? Order using SKU M323.H09; the GTIN is 4061905070020 for system entry and traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.11mm Gauge Pin 50mm Length Workshop Finish, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the combination of high repeatability (±0.002 mm), durable special‑steel construction and a compact 50 mm length for consistent end‑measure checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 17.11 mm, 50 mm length – Precision test pin with workshop design (Metav IndustryLine) A gauge pin, single, 17.11 mm, 50 mm length supplied for workshop inspection and end‑measure verification, suitable for routine dimensional checks and assembly controls Workshop-grade finish for routine inspection Tight tolerance: ±0.002 mm for reliable checking Special steel construction for long-term durability Supplied in protective transport case Consistent precision for repeatable checks The inspection pin delivers measurable confidence through its ±0.002 mm specification and a nominal diameter of 17.11 mm. This tolerance level places the component in a high‑precision bracket for typical workshop gauging tasks, where repeatability and clear accept/reject criteria are essential. The compact 50 mm length provides a stable reference surface that resists bending under normal handling, enabling consistent results during dimensional verification and end‑measure controls. The fine tolerance supports reliable decision‑making in quality routines without adding complexity to the measuring process. Robust design that suits everyday workshop use Designed as a workshop version, this single test pin pairs practical handling with corrosion‑resistant performance provided by special steel. The construction balances stiffness and service life so that frequent insertion and removal do not rapidly degrade the gauge surface. Supplied in a protective transport case, the pin remains safeguarded during storage and transit, which reduces the risk of nicks or contamination that would otherwise compromise measurement certainty. At a weight of 0.15 kg, the component is easy to position by hand or mount in simple jigs for repetitive checks. Clear identification and integration into inventory For straightforward procurement and traceability, the article is registered with clear identifiers and packing details that simplify stock management and process documentation. The single‑piece supply format reduces inventory complexity while the compact geometry enables integration into handheld testing sets or fixed inspection benches. Measurable data such as the diameter, length and stated tolerance provide a concise technical basis for calibration records and inspection plans, supporting consistent quality control across production batches. For precision inspection components from Metav IndustryLine purchase via Metav Werkzeuge; contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and supply information Technical data Article number: M323.H11 GTIN: 4061905070709 SKU: M323.H11 Facts Diameter: 17.11 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Supplied single piece Protective transport case FAQ What is the primary application for this test pin? The gauge pin M323.H11 from Metav IndustryLine is intended for end‑measure checks, dimensional verification and routine inspection tasks in workshop environments. What are the exact dimensions of the pin? The inspection pin has a nominal diameter of 17.11 mm and an overall length of 50 mm. Which tolerance does this gauge pin achieve? This test pin is specified with a tolerance of ±0.002 mm for high repeatability in measuring applications. Is the pin suitable for frequent workshop handling? Yes, the Metav IndustryLine gauge pin is a workshop version made from special steel and supplied in a protective transport case to withstand routine use. How is the product supplied and identified for ordering? The item is supplied as a single piece and identified as SKU M323.H11 with GTIN 4061905070709 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.12mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of exacting dimensional control and robust workshop design for dependable end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. M323.H12 gauge pin – 17.12 mm diameter, 50 mm length (Metav IndustryLine) The M323.H12 gauge pin is a single test pin with a nominal diameter of 17.12 mm, designed for precise end‑measurement tasks and inspection fixtures in workshop environments. Workshop execution for robust use Nominal diameter 17.12 mm for precise fits High accuracy ±0.002 mm for repeatable checks Precision that supports reliable inspection routines The cylindrical test element provides a defined reference diameter, enabling consistent end measurements and fit verification. With an indicated accuracy of ±0.002 mm, the component supplies a level of dimensional stability suitable for fine inspection tasks where small deviations matter. This degree of accuracy reduces uncertainty in routine checks and assists in maintaining process tolerances across production runs. The nominal size 17.12 mm is presented as a fixed reference, simplifying comparative measurements against mating bores and plug gauges. The function of a gauge pin is to deliver a stable, repeatable datum rather than to perform multi‑feature measurement; this focus makes it a straightforward tool for tightening quality control limits. Built for repetitive handling in workshop conditions Engineered as a workshop execution, the item combines compact geometry with handling convenience: a length of 50 mm and a mass of approximately 0.15 kg allow easy placement into fixtures and measuring rigs. Constructed from special steel, the pin is intended for repeated seating and withdrawal in test setups, helping to preserve seating accuracy over many cycles. The short, controlled length supports stable clamping in holders and reduces the effects of bending or misalignment that can occur with longer pins. Where reliable seating and mechanical robustness are required, this execution offers a pragmatic balance between durability and dimensional fidelity. Integration into inspection processes and documentation Supplied as a single item, the component is identifiable by SKU M323.H12 and GTIN 4061905070716, which aids stock control and traceability within inspection workflows. As a standard reference element, the pin can be used in bench checks, fixture validation and as a quick verification tool during assembly or maintenance operations. Its clear nominal diameter and stated tolerance simplify decision‑making in pass/fail evaluations and support reproducible results when combined with fixed‑stop holders or gauge blocks. The focused specification reduces interpretative steps in measurement procedures and helps align inspection templates across similar production stations. For reliable end‑measurement checks with the Metav IndustryLine gauge pin M323.H12, contact Metav Werkzeuge in Emmerich for ordering and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.H12 GTIN: 4061905070716 Manufacturer: Metav IndustryLine Facts Diameter: 17.12 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins (Messstifte) Application: End measurements FAQ What tolerance can be expected from this test pin? The stated tolerance for the gauge pin is ±0.002 mm, which defines its suitability for fine inspection work and repeatable dimensional checks. Is this part supplied as a single item or in sets? The product is supplied as a single item under the SKU M323.H12, intended for immediate use in fixtures or as a spare reference element. Which applications is this gauge pin intended for? The pin is intended primarily for end measurements, fit verification and quick reference checks in workshop inspection and assembly processes. What material is used for the pin and what does that imply? The pin is made from special steel, offering a robust running surface for repeated seating and stable mechanical behaviour under normal workshop handling. How is the product identified for inventory and traceability? Identification is supported by GTIN 4061905070716 and SKU M323.H12, enabling straightforward integration into stock and inspection documentation systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.13mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Reliable workshop inspection starts with a compact, purpose‑built pin: special steel construction, ±0.002 mm tolerance and a 50 mm shank length provide reproducible end‑measurement checks and stable handling; order via Metav Werkzeuge or consult the technical team for application guidance. Gauge pin 17.13 mm, 50 mm length (Metav IndustryLine) The Gauge pin 17.13 mm, 50 mm length is a single inspection pin designed for precise end‑measure verification and tight‑space checks in workshop and production settings. Workshop‑grade special steel construction Diameter 17.13 mm for end‑measure checks Tolerance ±0.002 mm for precise inspection Compact 50 mm shank for confined spaces High precision for repeatable inspection results The measuring pin delivers a ±0.002 mm tolerance, a level of accuracy suited to fine inspection tasks and quality control where small deviations matter. Such a tolerance means the pin can reliably confirm end dimensions and fits, reducing the need for destructive rework. The combination of tight nominal diameter control and a short, rigid shank minimises deflection during seating; this ensures that readings taken during plug‑style checks or alignment operations remain reproducible. The result is fewer rejected parts and a more predictable inspection routine. Robust design built for everyday workshop use Constructed from special steel and specified as a workshop version, the pin resists wear while keeping a compact footprint for use in jigs and fixtures. The 50 mm shank offers good accessibility in confined assemblies without sacrificing stiffness, making the item suitable for bench inspection and integration into manual gauging stations. The moderate mass supports stable seating in apertures and prevents excessive bounce when used for rapid go/no‑go checks, while the smooth finish reduces scoring on mating components. Practical application and handling guidance Designed for end‑measurement checks, the pin suits tasks such as reference probing, assembly verification and comparative gauging. Best practice is to store the pin in a clean environment and remove debris before each reference use to maintain the specified tolerance. When combined with calibrated length standards or digital readouts, the pin becomes part of a reliable inspection chain that documents conformity during incoming inspection or final checks. Traceability is supported by the provided identifiers and clear marking, so the component can be referenced in quality records and inspection plans. For procurement or to discuss how this Metav IndustryLine gauge pin can be integrated into existing inspection routines, contact Metav Werkzeuge in Emmerich for technical advice and delivery details at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.H13 GTIN: 4061905070723 Label: Gauge pin, single, 17.13 mm, 50 mm length Facts Length: 50 mm Diameter: 17.13 mm Tolerance/accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop execution Category: Gauge pins Application: End‑measurement checks FAQ What materials is the pin made from? The pin is manufactured from special steel, selected for wear resistance and dimensional stability in Metav IndustryLine gauge pins. What tolerance can be expected during inspection? Inspection and verification are performed to a tolerance of ±0.002 mm, which is typical for fine inspection pins used in workshop gauging. Is the pin suitable for tight or recessed holes? Yes, the 50 mm shank and compact form make the pin suitable for access to recessed or confined apertures during end‑measurement checks. How is traceability provided for this item? Traceability is supported by the article number (M323.H13) and GTIN (4061905070723), allowing clear reference in inspection records and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.14mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop construction to reduce inspection time and rework. With a nominal diameter of 17.14 mm, a length of 50 mm and a verified positional accuracy of ±0.002 mm, this single gauge pin ensures reliable pass/fail checks and repeatable end‑measurement setups; order directly via Metav Werkzeuge or consult our specialists for batch enquiries. Gauge pin, single, 17.14 mm, length 50 mm (Metav IndustryLine) Gauge pin, single, 17.14 mm, length 50 mm is a precision cylindrical test pin designed for quick dimensional verification, reference plunging and end‑measure setups in workshop metrology. Workshop‑grade design Diameter 17.14 mm with ±0.002 mm accuracy Length 50 mm for versatile probing Made from special steel Consistent measurements that cut inspection time This cylindrical reference pin delivers a repeatable mechanical fit for go/no‑go checks and comparative gauging, thanks to a tight tolerance of ±0.002 mm. The clearly defined diameter of 17.14 mm reduces uncertainty when setting end faces or checking bore seating, meaning fewer ambiguous rejects and less downstream rework. For production environments where fast, measurable decisions are required, the reliable physical dimension of the test element speeds throughput while preserving traceability and process control. Durable construction for everyday workshop use Engineered as a workshop‑grade component, the pin is manufactured from special steel chosen for resistance to wear and stable surface finish under repeated contact. The 50 mm shank length provides secure engagement in pin holders and fixtures while remaining compact enough for handheld checks. At approximately 0.15 kg, the item balances mass and handling comfort, reducing operator fatigue during frequent routine checks. The robust material and finish extend service life and maintain dimensional integrity across repeated use. Simple integration into quality workflows Supplied as an individually identified test element (SKU M323.H14), the pin is suitable for rapid inventorying and process assignment within existing gauge stacks or dedicated fixtures. The product’s straightforward geometric form makes it compatible with standard collets, mandrels and holder systems used in workshop inspection benches. Clear labelling and a traceable GTIN help maintain audit trails and support quality documentation needs, facilitating consistent results in incoming inspection, in‑process checks and final verification. For workshop measurement reliability choose Metav IndustryLine gauge pins — contact Metav Werkzeuge for tailored advice or to place a production enquiry and ensure the correct specification for your process Technical data Article number: M323.H14 GTIN: 4061905070730 Manufacturer: Metav IndustryLine SKU: M323.H14 Facts Diameter: 17.14 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pin / test pin FAQ What measurement tasks is this pin suited for? The gauge pin is intended for dimensional verification, reference plunging and end‑measurement setups; the 17.14 mm diameter and ±0.002 mm accuracy are tailored to precise go/no‑go and seating checks. Is the pin compatible with standard holders and collets? Yes, the cylindrical geometry and 50 mm length make the pin compatible with common holders, mandrels and fixture systems used in workshop inspection benches. How is the item identified for traceability? The product is supplied with SKU M323.H14 and GTIN 4061905070730 to support inventory control and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.15mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of precision tolerance ±0.002 mm, robust special steel construction and a compact 50 mm length for reliable end‑size checks; order this gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single – 17.15 mm dia, 50 mm length (Metav IndustryLine) The Gauge pin, single 17.15 mm is a workshop-grade test pin for fast, repeatable end‑size verification and fit checks in mechanical assembly and quality control. High-precision tolerance ±0.002 mm Diameter 17.15 mm for end‑size checks Hardened special steel, workshop grade Consistent end-size verification for production control A compact test pin of 17.15 mm diameter and 50 mm overall length provides a straightforward method for end‑size verification on shafts, bores and mating components. The defined tolerance of ±0.002 mm supports tight acceptance criteria and reduces the risk of assembly faults. In practice, the pin is used as a go/no‑go reference during incoming inspection or process control, delivering a rapid indication of conformity without complex setup. Design that supports repeatability and durability Manufactured from special steel and supplied in a workshop execution, the pin balances surface hardness with corrosion resistance to maintain dimensional stability over repeated use. The short, rigid geometry ensures minimal deflection during insertion, improving measurement repeatability compared with longer probe bodies. These characteristics translate into fewer rejects, shorter inspection cycles and more predictable production throughput. Practical handling, traceability and specification clarity At 0.15 kg and a 50 mm length, the pin is easy to handle on the shop floor and suitable for handheld checks or fixture integration. The product is identified by SKU M323.H15 and GTIN 4061905070747 for traceable procurement and stock control. The declared accuracy (±0.002 mm) is a clear specification for quality documentation and helps to align inspection limits with process capability data. For specialised metrology workflows, the simple geometry also eases cleaning and maintenance. For secure procurement and tailored advice on Metav IndustryLine gauge pins, contact Metav Werkzeuge for ordering support and application guidance. Technical data SKU: M323.H15 GTIN: 4061905070747 Label: Gauge pin, single, 17.15 mm diameter, 50 mm length Measurements Diameter: 17.15 mm Length: 50 mm Tolerance / accuracy variation: ±0.002 mm Weight: 0.15 kg Materials & features Material: special steel Version: workshop execution Category: gauge pin / test pin Intended use: end‑size verification and fit checks FAQ What is the declared accuracy of this gauge pin? The declared accuracy is ±0.002 mm, specified for the Metav IndustryLine gauge pin (SKU M323.H15) and intended to support strict tolerance inspections. Which material is used for the pin and how does it affect use? The pin is made of special steel; this material provides the hardness and wear resistance required for repeated workshop use while maintaining dimensional stability. Can this test pin be used for both shafts and bores? Yes, the geometry and surface finish of the gauge pin make it suitable for quick go/no‑go checks on shafts and matching bores as part of routine quality control. Is the product delivered with a calibration certificate? No calibration certificate is stated in the product data; calibration status is not indicated for this gauge pin, so calibration should be requested separately if traceable certification is required. How is the product identified for ordering and stock purposes? The gauge pin is listed under SKU M323.H15 and GTIN 4061905070747 for clear identification in procurement and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.16 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Robust workshop performance and dependable inspection results arise from the combination of a workshop-grade design, Ø 17.16 mm nominal diameter and a tight ±0.002 mm tolerance; the 50 mm length keeps deflection low for repeatable checks and the item is supplied in a protective case. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. Precision Gauge Pin M323.H16 — Ø 17.16 mm, 50 mm length (Metav IndustryLine) the Precision Gauge Pin M323.H16 serves as a single test pin for end-dimension inspection and fixture set‑up in workshop environments Workshop-grade construction Ø 17.16 mm nominal diameter Tolerance ±0.002 mm Supplied in protective case Consistent inspection through measured accuracy A tight ±0.002 mm tolerance delivers measurable confidence for routine dimensional checks and reduces downstream rework. Manufactured from special steel, the pin offers the hardness and surface finish necessary for reliable contact points; this combination supports repeatability when used for end‑dimension inspection or as a locating element in jig and fixture tasks. The calibrated geometry ensures a snug fit in bores and helps to standardise test routines, so process control is strengthened without complex setup. Designed for fixture alignment and quick verification The compact 50 mm length and the Ø 17.16 mm nominal size minimise bending moment while providing sufficient reach for most locating and verification tasks. As a single, workshop-oriented test pin, it simplifies fixture set‑up and spot checks on production lines, enabling faster cycle times and fewer measurement interruptions. The item’s balance of stiffness and manageable length makes it suitable for repeated insertion and withdrawal, supporting efficient quality routines in mechanical workshops and small-series production. Practical handling, transport and identification Delivered in a protective case, the pin is protected against transit damage and contamination, preserving its functional surface and dimensional integrity. The Metav IndustryLine designation signals availability through Metav Werkzeuge’s European distribution and quality filtering in Emmerich. Identification is straightforward: article number M323.H16 and GTIN ensure traceability within inventory systems, while the modest weight supports ease of handling during frequent use. Request tailored advice from Metav Werkzeuge to specify the right Metav IndustryLine gauge pins for precise fixture set‑up and inspection tasks — contact our specialists by phone or e‑mail for detailed information. Technical data Article number: M323.H16 GTIN: 4061905070754 Manufacturer: Metav IndustryLine Category: Gauge pin / Test pin Label: Precision Gauge Pin, single, Ø 17.16 mm, length 50 mm Facts Nominal diameter: 17.16 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version (Werkstatt‑Ausführung) Material: special steel Supplied in protective case for transport Single test pin for end‑dimension inspection FAQ What is the nominal diameter and tolerance of the pin? The Precision Gauge Pin M323.H16 from Metav IndustryLine has a nominal diameter of 17.16 mm with a tolerance of ±0.002 mm, suitable for tight inspection tasks. Is the pin supplied ready for use in workshop environments? Yes, the workshop‑grade test pin is supplied in a protective case and manufactured from special steel, allowing immediate use for locating and verification in workshop settings. Can this pin be used for fixture set‑up and routine checks? The M323.H16 gauge pin is intended for fixture alignment and quick verification; its 50 mm length and reduced deflection provide reliable repeatability for such applications. How is the item identified for ordering and inventory? The article is listed as M323.H16 with GTIN 4061905070754, which supports clear identification in procurement and stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.17mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high positional accuracy, robust special steel construction and a compact 50 mm length for reliable end‑measure checks in workshop environments. The measured tolerance of ±0.002 mm ensures repeatable reference measurements while the single‑item supply simplifies inventory. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. M323.H17 gauge pin — 17.17 mm diameter, 50 mm length (Metav IndustryLine) The M323.H17 gauge pin is a workshop‑grade test pin designed for precise end‑measure verification and go/no‑go checking in inspection and jig set‑up tasks. Workshop-grade special steel construction Diameter 17.17 mm, length 50 mm Tolerance ±0.002 mm for tight checks Individual item, SKU M323.H17 Consistent accuracy for dependable quality control The pin provides a tolerance of ±0.002 mm, making it suitable for high‑precision comparative checks and dimensional verification where deviation allowances are minimal. Measured at a diameter of 17.17 mm and a working length of 50 mm, this hardened reference piece reduces uncertainty in fit and clearance inspections. Using a defined gauge pin as a reference minimises rework and improves process yield by ensuring components meet critical end‑measure specifications before assembly. Built for workshop handling and long service life Manufactured in special steel and specified as a workshop‑grade item, the pin balances surface finish and toughness for repeated use on the shop floor. Its compact form and modest mass (0.15 kg) make handling straightforward for single‑operator checks and for integration into gauge sets or fixtures. The construction allows secure seating in receptacles and test rigs, and the visible SKU aids stock control and fast identification during routine inspections. Fits smoothly into inspection workflows and traceability Delivered as an individual item with a clear product identity (SKU M323.H17, GTIN visible in the technical data), the pin is ready for immediate use in calibration benches and inspection sequences. Its repeatability characteristics support batch sampling and go/no‑go routines, and the compact geometry suits use with fixture plates and inspection jigs. The combination of dimensional stability and straightforward handling reduces downtime and streamlines quality documentation. For dependable end‑measure checks choose the Metav IndustryLine M323.H17 gauge pin; contact Metav Werkzeuge in Emmerich for technical advice and procurement guidance. Technical data Article number: M323.H17 SKU: M323.H17 GTIN: 4061905070761 Manufacturer: Metav IndustryLine Facts Diameter: 17.17 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: Special steel Application: end‑measure checks Supplied as single item FAQ What tolerance does this gauge pin offer? The M323.H17 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.002 mm, suitable for fine comparative checks and tight go/no‑go applications. What are the pin's exact dimensions? Diameter is 17.17 mm and overall length is 50 mm; these dimensions make it suitable for end‑measure verification and fixture seating. Is the item supplied individually or as part of a set? This product is supplied as an individual gauge pin with SKU M323.H17 for single‑piece use or selective inclusion in bespoke gauge sets. Which material is used for this gauge pin? The pin is made from a special steel formulation chosen for dimensional stability and workshop durability. How should the gauge pin be stored to retain accuracy? Keep the pin clean and dry, store in a protective tray or box to avoid knocks; regular inspection and, when necessary, recalibration ensure ongoing measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.18mm Gauge Pin Length 50mm Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, a precise 17.18 mm nominal diameter and a tight ±0.002 mm tolerance for repeatable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Precision gauge pin M323.H18 — 17.18 mm diameter, 50 mm length (Metav IndustryLine) The Precision gauge pin M323.H18 is a single test pin for accurate end‑measure verification and fixture alignment in workshop metrology, engineered for routine use and repeatable results. Workshop version for everyday industrial use Ø 17.18 mm nominal diameter 50 mm overall length for fixture checks Tolerance ±0.002 mm for high precision Reliable measurement where it matters The gauge pin delivers a consistently tight tolerance of ±0.002 mm, which translates into measurable reliability during set‑up and inspection tasks. Made for the shop floor, this test pin supports quick verification of bores and mating features: the nominal 17.18 mm diameter provides a stable reference, while the 50 mm length ensures sufficient engagement for many fixture and clamp geometries. By converting a dimensional specification into a reproducible physical reference, this component reduces rework and shortens set‑up time. Robust construction for workshop environments Manufactured from special steel, the component is finished as a workshop version to withstand regular handling and routine measurement cycles. The material choice maintains a wear‑resistant surface and preserves concentricity over repeated insertions. Delivered in a protective transport case, the pin arrives ready for storage and safe transit between inspection points, preventing damage and preserving the calibrated condition of the reference surface. Practical benefits for production and quality control Integrating this precision pin into inspection jigs or go/no‑go routines simplifies decision making: the defined diameter and tolerance enable clear pass/fail checks and support traceable set‑ups. The compact single‑piece design minimises handling complexity and speeds up gauging operations in medium‑volume production. For workshops seeking to stabilise process control with minimal investment, the pin offers an economical route to consistent measurements and reduced downtime. For supply and technical matching of Metav IndustryLine's M323.H18, contact Metav Werkzeuge for direct ordering and installation guidance Technical data SKU: M323.H18 GTIN: 4061905070778 Label: Precision gauge pin, single, 17.18 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Nominal diameter: 17.18 mm Overall length: 50 mm Weight: 0.15 kg Tolerance / accuracy: ±0.002 mm Special features Material: special steel Workshop version Delivered in transport case Single test pin for end‑measure checks FAQ What is the nominal diameter and length of this gauge pin? The gauge pin has a nominal diameter of 17.18 mm and an overall length of 50 mm; these are the defining dimensions of the M323.H18. Is the M323.H18 suitable for routine workshop inspection? Yes. The M323.H18 is supplied in a workshop version made from special steel and packaged in a transport case for secure handling during everyday inspection tasks. What accuracy can be expected from this test pin? The test pin is specified with an accuracy of ±0.002 mm, enabling fine positional and end‑measure checks suited to production and quality control workflows. Can the gauge pin be used in fixture set‑up and go/no‑go checks? Absolutely. Its single‑piece design and precise nominal diameter make the pin suitable as a reference for fixture alignment and simple go/no‑go gauging routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.19mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Benefit from precise end‑measurement capability combined with robust special‑steel construction and a compact 50 mm body for measurements in confined assemblies. Order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.H19 test pin — 17.19 mm diameter, 50 mm length (Metav IndustryLine) The M323.H19 test pin is a workshop‑grade, single precision probe engineered for reliable end‑measurements in compact components and assembly fixtures. Workshop‑grade special‑steel construction Precise 17.19 mm diameter 50 mm length for confined or recessed measurements Accuracy that keeps production on target This probe delivers a consistently low measurement deviation with a declared tolerance of ±0.002 mm, making it suitable for fine end‑dimension checks and quality control operations where small deviations matter. The 17.19 mm nominal diameter is ground to high fidelity and combined with the hardened special steel body this results in repeatable seating against datum faces and gauges. The obvious benefit is fewer scrapped parts and shorter inspection cycles when integrated into routine checks or fixture verification. Compact form for machines and tight spaces With an overall length of 50 mm and a compact shaft, the component is classified within the Mikro range for calipers and inspection probes, offering the best balance between reach and rigidity for small assemblies. The short form factor reduces bending and improves handling in confined bores or recessed surfaces, so end‑measurements on housings, sleeves or precision dowels can be completed without ancillary extensions. The compact design also simplifies storage and transport within workshop tool sets. Built for workshop use and straightforward handling The workshop execution is reflected in the choice of special steel and a practical overall mass that supports stable manual placement. Supplied in a transport box, the pin is protected during storage and transit and is ready to be integrated into gauge blocks, test fixtures or comparative setups. The robust construction reduces the need for frequent replacements, while the clear numerical tolerance supports traceable inspection protocols and consistent results across production runs. For repeatable end‑measurements choose the Metav IndustryLine M323.H19 test pin — contact Metav Werkzeuge in Emmerich for procurement or technical clarification: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: M323.H19 GTIN: 4061905071478 Manufacturer: Metav IndustryLine Facts Diameter: 17.19 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Design: Workshop execution Delivery: Supplied in transport box Category: Messstifte Application: End measurements FAQ What level of accuracy does this test pin provide? The M323.H19 test pin is specified with a tolerance of ±0.002 mm, suitable for fine end‑dimension checks in precision workshops. Is the pin suitable for confined bores and recessed measurements? Yes, the 50 mm overall length and compact shaft geometry make the probe appropriate for confined or recessed measurement situations. What material is the probe made from and why does that matter? The probe is manufactured from special steel, providing hardness and wear resistance for repeated contact with datum faces in a workshop environment. How is the product delivered and protected during transport? The probe is supplied in a transport box to protect the finished surfaces and maintain measurement integrity until installation. Can the test pin be used in fixture or gauge applications? The M323.H19 probe is suited to fixture and gauge use where precise end measurements and repeatability are required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.1mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise gauge control and robust workshop construction to reduce setup time and rework. The combination of ±0.002 mm tolerance, a 17.1 mm diameter and a 50 mm length delivers consistent mating and repeatable end‑measure checks; order via Metav Werkzeuge or consult the technical team for application advice. Gauge pin M323.H10 — 17.1 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.H10 is a single precision test pin designed for fixture setting, end‑measure verification and gaging applications in workshop environments Single precision gauge pin 17.10 mm Hardened special steel construction Length 50 mm for fixture and end‑measure Supplied in transport case Precision that reduces rework and downtime A tight tolerance of ±0.002 mm ensures that mating fits and inspection references are reliable, which cuts down on part rejection and repeat measurements. The combination of a 17.1 mm diameter and 50 mm overall length provides a stable reference for end‑measure checks and datum setting. As a result, measurement intervals and fixture adjustments become predictable and reproducible, improving throughput in batch runs and quality control routines. Robust design for everyday workshop use Manufactured from special steel, the pin is specified for regular handling and exposure to workshop conditions. The workshop version construction prioritises wear resistance and dimensional stability so that surface and edge integrity remain intact over repeated seating cycles. This reduces the frequency of replacements and helps to maintain consistent gauge behaviour during production and assembly tasks. Practical handling and faster process integration Delivered as a single, ready‑to‑use gauge pin, this item integrates directly into jigs, go/no‑go fixtures and inspection benches. The 50 mm length offers clearance for clamps and supports while maintaining rigidity during measurement. Supplied in a transport case, the pin is protected during storage and movement between workstations, enabling simple, damage‑free deployment across multiple lines or workcells. Clear identification and workshop reliability The M323.H10 is intended as a straightforward, repeatable reference element for end‑measure and gaging tasks. Labelling and identifiers ensure traceability during stock management and toolroom allocation. Backed by a European supply chain filter, the Metav IndustryLine variant stands for accessible precision that fits routine industrial and maintenance workflows without bespoke procurement processes. Contact Metav Werkzeuge for technical advice on integrating the Metav IndustryLine gauge pin into existing fixtures or to request a suitability assessment for specific gaging tasks Technical Data SKU: M323.H10 GTIN: 4061905070693 Brand: Metav IndustryLine Facts Diameter: 17.1 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single piece delivery Supplied in transport case Category: Gauge pins (Messstifte) FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.H10 is specified with a tolerance of ±0.002 mm, making it suitable for high‑precision end‑measure checks and fixture references. What material is used for the pin? The pin is made from special steel, selected for wear resistance and dimensional stability in workshop conditions. Which applications suit this test pin best? Typical uses include fixture setting, end‑measure verification, jigs and assembly alignment; the pin functions as a stable reference in gaging and go/no‑go checks. How is the product supplied and protected? The M323.H10 is supplied as a single item and comes in a transport case to protect the gauge during storage and transit. Which identifiers are useful when ordering or restocking? Order or reference the SKU M323.H10 and GTIN 4061905070693 for unambiguous procurement and stock control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.21mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
The combination of a precise 17.21 mm nominal diameter, a compact 50 mm length and a tight ±0.002 mm tolerance ensures reproducible end‑dimension checks and robust fit gauging in workshop environments; benefit from the durability of special steel and the convenience of individual supply. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin M323.H21 — 17.21 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single, 17.21 mm, 50 mm length designed for reliable end‑dimension inspection and fit testing in toolrooms and quality control stations. Single gauge pin 17.21 mm diameter 50 mm compact length for stable handling Tolerance ±0.002 mm for high precision Supplied individually for controlled inspection Precise inspection where repeatability matters This inspection pin delivers a defined 17.21 mm diameter with a tight ±0.002 mm tolerance, making it suitable for end‑dimension verification and go/no‑go fit checks. The narrow tolerance supports consistent interchangeability across batches and reduces rework by providing an objective reference for gauge blocks, bores and mating parts. The M323.H21 designation identifies the item for inventory and traceability while the compact length maintains handling stability during repetitive checks. Durable construction for workshop use Manufactured in special steel, the pin is engineered to resist wear in everyday use and to retain dimensional integrity over time. The 50 mm length provides sufficient engagement for short bores and shoulder checks while remaining easy to manoeuvre in tight setups. The workshop design emphasises practical robustness: the component is delivered singly to simplify storage and to avoid cross‑contamination between different nominal sizes, supporting orderly inspection routines in production environments. Practical integration and quality assurance As an individual inspection element, this gauge pin fits seamlessly into existing test benches, fixtures and gauge sets. The item's compact mass and measured weight aid rapid placement and removal during sampling inspections, promoting efficient measurement cycles. Clear identification via M323.H21 and the GTIN enables straightforward stock control and documentation in quality workflows, assisting audits and traceability without additional conversion or adaptation. Choose Metav IndustryLine's M323.H21 gauge pin for dependable, workshop‑ready inspection performance and contact Metav Werkzeuge for tailored advice or order coordination. Technical data Article number: M323.H21 GTIN: 4061905071492 Category: Messstifte Facts Nominal diameter: 17.21 mm Overall length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Design: workshop execution Supply: single unit ECLASS: 21170231 FAQ What tolerance does this gauge pin offer? The gauge pin is specified with a tolerance of ±0.002 mm, making the M323.H21 suitable for high‑precision end‑dimension checks. Which material is used for the pin? The pin is made from special steel, chosen for durability and stable dimensional performance under regular workshop conditions. How is the product supplied and identified? The item is supplied individually and identified as M323.H21 (GTIN 4061905071492) to simplify stock management and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.22mm Gauge Pin 50mm Length Workshop Version, ±0.002mm Accuracy - Metav IndustryLine
The single Metav IndustryLine gauge pin M323.H22 delivers repeatable end‑measure checks thanks to a tight ±0.002 mm tolerance, a nominal diameter of 17.22 mm and a robust 50 mm length; combine accuracy, durability and straightforward logistics by ordering through Metav Werkzeuge or contacting our specialists for specification advice. Metav IndustryLine gauge pin M323.H22 — gauge pin, 17.22 mm, 50 mm length The Metav IndustryLine gauge pin M323.H22 is a single test pin designed for precise end‑measure inspections in workshop and production environments. Diameter 17.22 mm nominal Tolerance ±0.002 mm high precision 50 mm length for end‑measure checks Manufactured from special steel Faster, verifiable inspections with industrial accuracy The M323.H22 functions as a reference element for end‑measure tasks where consistency and traceability matter. With a declared tolerance of ±0.002 mm, the pin reduces measurement uncertainty and shortens inspection cycles by providing a stable reference diameter. In practice, this degree of precision supports quality control decisions without repeated reworking; the hardened geometry and tight manufacture tolerances ensure each check is comparable and repeatable across shifts and operators. Robust construction that withstands workshop use Constructed from special steel, the pin resists wear and maintains form under repetitive seating and extraction operations. The 50 mm shank length gives good handling and engagement in fixtures while keeping bulk low for compact setups. The workshop specification means the component is produced for everyday industrial use rather than delicate lab handling, so maintenance intervals are minimised and service life is extended — a cost‑effective choice when throughput and uptime are priorities. Application scope and metrological classification This gauge pin sits in the micro class of measuring tools (nominal range around 10–100 mm), making it suited to fine mechanical assemblies, jig and fixture checks, and end‑dimension verification on turned or milled parts. The pin serves as a straightforward master for go/no‑go checks, plug gauges and manual comparators. For users familiar with tolerance bands, the combination of 17.22 mm nominal size and ±0.002 mm tolerance offers a precise control point for batch acceptance or for setting up more complex measurement chains. For dependable end‑measure control, place an order for the Metav IndustryLine gauge pin M323.H22 via Metav Werkzeuge or request tailored advice from our specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.H22 GTIN: 4061905071508 Brand: Metav IndustryLine Category: Gauge pin / test pin Facts Nominal diameter: 17.22 mm Length: 50 mm Manufacturer SKU: M323.H22 Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop version Single gauge pin, individual supply Intended use: end‑measure inspections FAQ What level of precision does this gauge pin provide? The Metav IndustryLine gauge pin M323.H22 is manufactured to a tolerance of ±0.002 mm, making it suitable where tight dimensional control is required. For which applications is the gauge pin best suited? The pin is intended for end‑measure checks, fixture verification and as a reference for plug or comparator gauges in workshop and production settings. What material is the pin made from and why does it matter? The pin is made from special steel, chosen for its wear resistance and geometric stability during repeated seating and extraction cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.23mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-ready robustness, 17.23 mm gauge accuracy and fine ±0.002 mm tolerance for reliable end-dimension checks; order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test Pin M323.H23 — Single Test Pin, 17.23 mm Gauge Diameter, 50 mm Length (Metav IndustryLine) Test Pin M323.H23 is a workshop-grade, precision test pin intended for end-dimension inspection and gauge setting in small-part environments Workshop version, robust design Diameter 17.23 mm for end‑dimension checks Length 50 mm for stable handling Accuracy ±0.002 mm tolerance Reliable measurements that speed up inspection cycles The compact test pin is engineered to deliver consistent results in routine checks and repeat measurements. With a nominal gauge size of 17.23 mm and a verified displacement tolerance of ±0.002 mm, the pin provides the dimensional certainty required for serial inspection tasks and Go/No‑Go checks. The tight tolerance reduces rework and downstream rejects by ensuring that measured end dimensions meet specification limits quickly. As a workshop component, this measuring element supports predictable throughput and simplifies traceable inspection steps. Designed for secure handling and precise positioning A 50 mm overall length gives the pin a practical grip and sufficient support when used with holders, fixtures or manual gauges; the length balances reach and stiffness so alignment is straightforward and repeatable. Manufactured from special steel, the pin offers durable contact surfaces under frequent use and maintains geometric stability during short transfer and measurement operations. The workshop execution focuses on functional resilience rather than laboratory fragility, making the element suited to tasks ranging from fixture verification to component release testing. Small-format classification and logistics fit for busy shops With its small gauge size the product falls into the micro measurement class, making it particularly suitable for fine mechanical and precision small-part work where compact tools are required. Delivery includes a transport case, ensuring the pin remains protected in transit and between jobs, which aids organisation on busy benches. The item is traceable by GTIN and SKU for inventory control and can be integrated into existing inspection kits or gauge sets without complication. The combination of compact form, documented accuracy and practical packaging supports a dependable routine inspection workflow. Contact Metav Werkzeuge for tailored application advice or to request the workshop-ready Test Pin M323.H23 — specialists are available to recommend fixtures, complementary gauges or stock options and to advise on immediate availability from Emmerich Technical data Article number: M323.H23 GTIN: 4061905071515 Label: Prüfstift, einzeln, 17,23 mm Länge 50 mm ECLASS: 21170231 Facts Gauge diameter: 17.23 mm Length: 50 mm Accuracy / deviation: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Supplied in transport case Category: Test pins FAQ What inspection tasks is this test pin suited for? The test pin M323.H23 (Metav IndustryLine test pin, SKU M323.H23) is suited for end‑dimension checks, gauge setting and fixture verification on small components where a 17.23 mm reference is required. Does the test pin come ready for use out of the box? The workshop version of the test pin arrives protected in a transport case and is immediately usable for workshop inspection; no additional preparation is necessary beyond standard cleaning and mounting. Which materials is the pin manufactured from and how does that affect wear? Manufactured from special steel, the M323.H23 test pin provides robust contact faces for frequent use in workshop environments and retains geometric stability under normal handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.24mm Gauge Pin Workshop Version 50mm Length, Special Steel ±0.002 - Metav IndustryLine
Take advantage of a compact measuring solution that combines exacting dimensional control, a sturdy workshop-grade design and clear traceability for routine inspection tasks; the 17.24 mm diameter and 50 mm length deliver reliable end-measure checks with a manufacturing tolerance of ±0.002 mm. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — 17.24 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single — 17.24 mm Ø, 50 mm length is a workshop-grade precision test pin designed for end measurements and go/no-go checks on small bores and fittings. Precision Ø 17.24 mm, tolerance ±0.002 mm 50 mm length for end-dimension checks Workshop-grade special steel construction Supplied as a single inspection pin Compact precision for fine assemblies This compact test element belongs to the micro measurement class and is sized to deliver repeatable checks where space is limited. With a nominal diameter of Ø 17.24 mm and a length of 50 mm, the component provides a stable contact area for end-measurement tasks and fit verification. The specified tolerance of ±0.002 mm ensures that dimensional deviations remain within tight limits, supporting consistent pass/fail decisions during production control or incoming inspection. The design reduces measurement uncertainty in small cavities and mating parts, making it suitable for precision fixtures and manual inspection routines. Robust workshop design built for everyday use Produced in a workshop-grade finish and made from special steel, this single test pin offers the mechanical resilience required in daily metrology tasks. The material choice balances hardness and corrosion resistance to maintain geometry under repeated handling and insertion cycles. The compact mass and form factor enable fast positioning in jigs and test rigs while preserving concentricity and contact quality. This durability translates into longer intervals between replacements and dependable performance on the shop floor, reducing downtime for routine quality checks. Simple integration into inspection workflows The test pin is supplied as an individual measuring element and integrates seamlessly into gauge blocks, plug gauges and custom fixtures. Identified by SKU M323.H24, the part is easy to catalogue and reference in inspection plans or assembly instructions. The consistent manufacturing tolerance supports traceable sampling and statistical process control, improving the reliability of dimensional reports. For operations seeking a low-complexity precision aid, this single gauge pin provides a straightforward solution for repeatable end-measurement and go/no-go applications while fitting into established workshop routines. Choose the Metav IndustryLine gauge pin for reliable micro-range checks — contact Metav Werkzeuge in Emmerich for technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.H24 GTIN: 4061905072017 Material: Special steel Weight: 0.15 kg Length: 50 mm Facts Diameter: 17.24 mm Tolerance: ±0.002 mm Measurement range: 17.24 mm Mass: 0.15 kg Special features Workshop version Single test pin supply Category: Gauge pin / end gauge Precision-class suitable for micro-range inspections FAQ What are the main dimensions of this test pin? The gauge pin M323.H24 has a diameter of 17.24 mm and an overall length of 50 mm. What tolerance is achieved during manufacture? Manufacturing tolerance is ±0.002 mm, providing tight dimensional control for inspection tasks. What material is used for the pin? The pin is made from special steel in a workshop-grade finish for durable handling. For which applications is this pin intended? The single test pin is intended for end-dimension checks, small-bore verification and go/no-go inspections in micro-range assemblies. How is the item supplied for inventory and referencing? The part is supplied as a single inspection pin and identified as SKU M323.H24 for straightforward catalogue management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.25mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Reliable dimensional control for workshop inspection: benefit from ±0.002 mm measurement precision and a robust special steel construction in a compact 50 mm length; order the part directly via Metav Werkzeuge or consult the sales team for batch supply and suitability. Gauge pin, single, 17.25 mm, length 50 mm — Metav IndustryLine, ±0.002 mm tolerance The gauge pin, single, 17.25 mm, length 50 mm is a precision end-measurement pin intended for workshop and inspection use, ideal for quick go/no-go checks and repeatable dimensional verification. 17.25 mm nominal diameter 50 mm working length Accuracy ±0.002 mm Workshop version, special steel Consistent precision that reduces inspection uncertainty For routine dimensional checks, the primary advantage is reproducible measurement. The pin’s ±0.002 mm tolerance provides a dependable reference point for pass/fail decisions and fast in-process checks. This reproducibility cuts verification time and lowers the risk of downstream rework by delivering a clear, repeatable datum. Where tight tolerances are required, using a precise reference pin avoids ambiguous readings and contributes directly to process stability and traceability. Built for workshop handling and long-term wear resistance Constructed from special steel and specified as a workshop version, the pin balances durability with handling convenience. The 50 mm working length offers enough engagement for reliable seating while remaining compact for frequent use; the moderate mass also helps with stable placement during manual checks. This robustness minimises surface wear and maintains the diameter over many cycles, which supports longer service intervals and a steady performance profile in production environments. Easy integration into inspection routines and stock management Marked with SKU M323.H25 and GTIN 4061905072024, the component slots readily into existing gauge assortments and inspection sets. The nominal 17.25 mm diameter makes it suitable as an end gauge for bore and shaft verifications or as a reference in fixture set-ups. Supplied as a single pin, it is straightforward to combine with complements for stepped checks or assemblies. Procurement through Metav IndustryLine simplifies replenishment and ensures consistent quality across batches, supporting reliable inventory control and auditing requirements. Contact Metav Werkzeuge for tailored advice on Metav IndustryLine gauge pins, batch availability, and how the M323.H25 can be integrated into existing inspection procedures — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.H25 GTIN: 4061905072024 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 17,25 mm Länge 50 mm Facts Nominal diameter: 17.25 mm Working length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins Story trigger: endmasse FAQ What nominal diameter does the pin have? The gauge pin supplied as M323.H25 has a nominal diameter of 17.25 mm, suitable for precise go/no-go checks and reference measurements. What is the stated measurement tolerance? The Metav IndustryLine pin is manufactured to an accuracy of ±0.002 mm, providing high repeatability for workshop verification tasks. Which material is used for this inspection pin? The component is made from special steel, selected for wear resistance and stability under frequent handling in a workshop environment. How long is the working length and how does that help? The pin has a 50 mm working length, offering secure engagement for reliable insertion and a stable reference during manual inspections. How is the product identified for ordering and inventory? This single gauge pin is available as SKU M323.H25 and GTIN 4061905072024, which facilitates straightforward ordering and stock tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.26mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop-ready construction, ±0.002 mm dimensional accuracy and compact handling for repeatable end measurements; order directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single, 17.26 mm diameter · 50 mm length (Metav IndustryLine) Gauge pin, single, 17.26 mm diameter · 50 mm length is a precision inspection pin for end-measurement and go/no-go checks in fine mechanical and workshop environments. High dimensional accuracy ±0.002 mm Made from special steel, workshop version Length 50 mm for robust handling Delivered in a protective case Accuracy that secures process tolerance The pin delivers a ±0.002 mm positional tolerance, providing a reliable reference for end measurements and Go/No‑Go testing. Such tight deviation supports quality control where repeatability matters most, reducing scrap and rework. The small diameter and compact form suit high-density measurement setups, enabling consistent contact with inspection jigs and gauges while keeping setup time short and throughput steady. Robust design for daily workshop use Manufactured in special steel and specified as a workshop version, the pin balances wear resistance with practical handling. The 50 mm length gives enough purchase for manual insertion and mounting in fixtures without compromising rigidity. Supplied in a protective case, the component is ready for safe transport between benches and inspection stations, maintaining surface condition and dimensional integrity for longer service life. Practical integration into inspection routines Designed for micro-range measurements (Micro: 10–100 mm), this inspection pin suits small parts and fine mechanical assemblies where space and precision are decisive. At 0.15 kg, the item is easy to manoeuvre and mount in common test rigs. Its compact geometry simplifies alignment, so inspection cycles run faster and measurement uncertainty is minimised—supporting efficient quality assurance in both prototyping and repetitive production. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H26 GTIN: 4061905072031 Manufacturer: Metav IndustryLine Facts Diameter: 17.26 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop version Material: special steel Delivered in protective case Category: gauge pins Suitable range: Micro (10–100 mm) FAQ How precise is this gauge pin for inspection tasks? The gauge pin from Metav IndustryLine offers a tolerance of ±0.002 mm, making this single inspection pin suitable for fine end-measurements and tight go/no‑go checks. Is the pin delivered ready for transport and storage? Yes, the single gauge pin is supplied in a protective case to preserve surface quality and ensure safe handling between inspection stations. What applications suit a 17.26 mm diameter pin? A 17.26 mm diameter inspection pin is well suited to small mechanical parts, alignment checks and fixture-based measuring tasks within the Micro (10–100 mm) measurement class. What material is used and how does it affect wear resistance? The inspection pin is made from special steel, chosen to provide robust wear resistance for regular workshop use while maintaining dimensional stability. Can this pin be used in automatic test rigs and jigs? The compact geometry and standardised diameter of the Metav IndustryLine gauge pin allow reliable integration into common fixtures and automated inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com