Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
19.93mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine high-precision repeatability with a robust workshop build: the compact 19.93 mm diameter and 50 mm length make this gauge pin ideal for reliable end‑measurements and quick reference checks. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Gauge Pin M323.J93 – 19.93 mm Ø, 50 mm Length (Metav IndustryLine) The Gauge Pin M323.J93 is a precision end‑measurement pin for workshop and inspection tasks, designed for repeatable diameter checks and reference gauging in small to medium components. 19.93 mm diameter precision High accuracy ±0.002 mm Workshop‑grade construction 50 mm total length Consistent precision that reduces rework The pin delivers ±0.002 mm dimensional stability, which translates into dependable pass/fail decisions during incoming inspection and in‑process checks. Such repeatability reduces corrective work and scrap by catching deviations early. The combination of a narrowly controlled diameter and a defined contact length ensures that measurements remain comparable from one operator to the next, supporting a more efficient quality workflow. Durable design for everyday workshop use Manufactured from special steel, the component is finished for resilience under regular handling and contact. The workshop‑grade execution offers a balance between toughness and dimensional stability, so the pin resists wear while retaining its calibrated form. The 50 mm overall length gives a solid handling grip and positive seating in gauges or jigs, simplifying fast checks without compromising accuracy. Suited to micro-range end measurements With a nominal diameter of 19.93 mm, the pin sits in the micro range classification (small, precision dimensions up to 100 mm), making it particularly appropriate for fine mechanical parts, precision bores and end‑measurements where compactness and stiffness are required. For applications that demand tight fit tolerances, the narrow diameter tolerance helps ensure components assemble correctly first time. Practical traceability and workshop integration Supplied as a single item with a clear item designation and manufacturer reference, the pin integrates easily into inspection routines and tool sets. The compact form factor allows rapid swapping between gauges and jigs, while the defined tolerance supports a consistent inspection standard across production batches. For purchasers seeking reliable small‑part gauges, this execution supports steady quality control without complex set‑up. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine gauge pin M323.J93 into production checks and to secure immediate delivery from our European stock. Technical data Article number: M323.J93 GTIN: 4061905449727 Manufacturer: Metav IndustryLine Facts Diameter: 19.93 mm Length: 50 mm Weight: 0.2 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop‑grade execution Single item supply E‑class: 21170231 FAQ What level of accuracy does this gauge pin provide? The gauge pin is specified with a dimensional tolerance of ±0.002 mm, which supports high‑precision checks and repeatable pass/fail evaluations for small tolerances. Which applications suit this 19.93 mm pin? This diameter and form are intended for end‑measurements, reference gauging and quick diameter checks on small to medium components, especially where compact, stiff measuring tools are required. Is the pin suitable for frequent workshop use? Yes. The special steel construction and workshop‑grade execution provide wear resistance and robustness for everyday inspection tasks. How is the item identified for inventory and traceability? The item is supplied as a single gauge pin with the manufacturer reference M323.J93 and GTIN 4061905449727 for straightforward inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.94mm Gauge Pin 50mm Length Workshop Version, Special Steel in Case - Metav IndustryLine
A workshop-grade gauge pin that pairs a 19.94 mm diameter with a tight ±0.002 mm tolerance and special steel construction for dependable end‑measurements; the 50 mm length and robust finish support repeated use in production and inspection. Order directly via Metav Werkzeuge or consult their specialists for application advice. Gauge pin, single, 19.94 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin 19.94 mm is a workshop-grade end‑measurement standard for bore checks, fit verification and go/no‑go comparisons in daily inspection and production environments. Workshop-grade special steel construction Diameter precisely 19.94 mm, tolerance ±0.002 Length 50 mm for standard end‑measurements Supplied in transport case for secure handling Consistent accuracy that reduces rework High repeatability is central to efficient quality control; the ±0.002 mm tolerance of this gauge pin narrows measurement uncertainty and minimises the need for rework or secondary checks. Manufactured from special steel, the pin retains dimensional stability under frequent handling and resists wear in typical workshop conditions. The combination of a set diameter and controlled manufacturing tolerance supports predictable mating with gauges, plugs and bores, so inspection intervals and corrective actions can be planned with greater confidence. Robust design for busy workshop routines Built as a workshop‑grade tool, the pin’s 50 mm length provides a practical balance between reach and rigidity for end‑measurement tasks. The robust finish and compact mass suit handheld use as well as fixture mounting, while the supplied transport case protects the pin during storage and movement between workstations. This practical packaging simplifies logistics in small and medium workshops and reduces handling damage that would otherwise compromise measurement reliability. Fits into inspection workflows with minimal fuss As an end‑measurement aid, the pin is ideal for checking bore sizes, verifying fits and confirming end dimensions at the workbench or on the machine. The simple geometry makes results easy to interpret and integrate into standard inspection records; the pin’s stable material properties support repeat measurements throughout a shift. For operations that require a clear traceable item description, the component is identified by its article data and GTIN in the technical specification below, enabling straightforward inventory and quality‑control documentation. Choose the Metav IndustryLine gauge pin for reliable end‑measurement performance and pragmatic workshop handling — order via Metav Werkzeuge GmbH in Emmerich or request application guidance from their specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.J94 GTIN: 4061905449734 Label: Gauge pin, single, 19.94 mm diameter, 50 mm length ECLASS: 21170231 Core dimensions Diameter: 19.94 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Features and materials Material: special steel Workshop version Supplied in transport case Story trigger: end‑measurement FAQ What diameter does the pin have? The gauge pin has a diameter of 19.94 mm, specified for precise end‑measurement tasks. What tolerance is achieved? Tolerance is ±0.002 mm, ensuring close dimensional conformity for inspection use. What is the pin made from? The pin is manufactured from special steel, chosen for stability and wear resistance in workshop environments. What length is the pin and how is it packaged? Length is 50 mm and the pin is supplied in a transport case to protect it during handling and storage. What applications suit this pin? Typical uses include bore checks, fit verification and general end‑measurement tasks in production and inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.95mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Accurate dimensional checking with a workshop‑grade inspection pin: the combination of Ø19.95 mm nominal diameter, ±0.002 mm tolerance and a 50 mm usable length ensures reliable end‑measure verification and quick go/no‑go testing; order directly via Metav Werkzeuge or consult our technical team for specification support. Gauge pin M323.J95 — single inspection pin, Ø19.95 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.J95 is a single inspection pin for fast diameter verification and end‑measure control in workshop metrology and quality checks. Single Ø19.95 mm for precise diameter checks Workshop-grade special steel construction Tolerance ±0.002 mm high accuracy Delivered in protective transport case Precision where small deviations matter This inspection pin offers a nominal diameter of Ø19.95 mm with a declared accuracy of ±0.002 mm, making it suitable for tasks where tight dimensional tolerances determine part acceptance. The compact 50 mm length keeps the pin rigid under hand use and reduces bending influence during insertion, which translates into repeatable go/no‑go or comparative checks in production and incoming‑goods inspection. The accuracy statement provides a measurable basis for decision-making and reduces the need for repeated rework. Built for everyday workshop use Constructed from special steel in a workshop configuration, the pin resists common wear mechanisms while remaining affordable for routine use. The robust material choice balances hardness and toughness so that the pin maintains its profile through repeated insertions into bores and fixtures. At around 0.2 kg, the component feels substantial without being cumbersome, supporting quick handling during assembly checks and fixture setup. The straightforward geometry is ideal for rapid in‑process inspection tasks and for use with simple hand gauges or bench fixtures. Practical handling and storage benefits Supplied as a single test pin, the item is intended for quick deployment in inspection routines and fixture validation. A protective transport case is included to maintain the gauge surface during storage and movement between workstations, preserving calibration and surface finish. Identification by SKU M323.J95 and GTIN 4061905449741 supports inventory control and traceability in quality systems. The combination of straightforward form factor and workshop‑oriented finishing reduces downtime and simplifies staff training for routine measurement tasks. For workshop metrology reassurance, order the Metav IndustryLine M323.J95 inspection pin via Metav Werkzeuge or get tailored advice from our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.J95 GTIN: 4061905449741 Manufacturer: Metav IndustryLine Facts Diameter: 19.95 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Special features Material: special steel Workshop version Single inspection pin Application: end‑measure checks FAQ What is the declared accuracy of this inspection pin? The inspection pin is specified with an accuracy of ±0.002 mm, making it suitable for precise diameter verification in routine workshop checks. Can the pin be used for go/no‑go testing of bores? Yes, the single pin is suitable for go/no‑go and insertion checks; its Ø19.95 mm nominal diameter is intended for quick acceptance testing and end‑measure verification. How should the pin be stored to maintain its accuracy? The pin is supplied in a protective transport case; store it in that case when not in use to avoid surface damage and to preserve the measurement surface for reliable checks. Is the material suitable for repeated use in production environments? The pin is made from special steel in a workshop configuration, offering a balance of wear resistance and toughness appropriate for repeated insertions in production inspection routines. How is this item identified for inventory and traceability? Identification is provided by Article number M323.J95 and GTIN 4061905449741 to support inventory management and traceability within quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.96mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of high reproducibility and robust workshop design: the gauge pin provides a stable 19.96 mm reference with an accuracy of ±0.002 mm, made from special steel for durable service; order directly via Metav Werkzeuge or ask the consultants for specification support. Gauge pin M323.J96 — Metav IndustryLine precision gauge pin (19.96 mm, 50 mm length) A gauge pin M323.J96 intended as a compact reference for end measurements and repeatable checks in workshop inspection and assembly environments. Workshop-grade design for robust use Diameter 19.96 mm for end‑measure checks Length 50 mm for stable handling Tolerance ±0.002 mm for tight fits Repeatable precision that speeds up inspection The fixed diameter and tight tolerance make this pin a reliable reference for repetitive checking and go/no‑go comparisons. With a stated accuracy of ±0.002 mm, the component supports narrow assembly tolerances and reduces the need for repeated adjustment cycles, which improves throughput in quality inspection. The result is faster decision-making on the shop floor and fewer ambiguous measurements during routine controls. Built for everyday workshop conditions Manufactured from special steel and configured as a workshop‑grade tool, the pin combines wear resistance with straightforward handling. The 50 mm length provides a secure grip while remaining compact for confined inspection points, and the solid construction minimises deformation under typical use. This durability translates into longer service intervals and predictable behaviour under repeated seating and withdrawal. Simple integration into inspection routines Presented as a single gauge pin with a clear SKU and traceability data, this item slots easily into existing fixture sets, inspection benches and reference kits. The compact format supports quick exchange between stations and reduces downtime during batch checks. As part of the Metav IndustryLine range, the component benefits from a consistent supply chain and documentation that supports procurement and inventory control. For personalised advice or to source the Metav IndustryLine gauge pin M323.J96, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and request the SKU M323.J96 for fast processing Technical data SKU: M323.J96 GTIN: 4061905449758 Label: Prüfstift, einzeln, 19,96 mm Länge 50 mm Brand: Metav IndustryLine Facts Diameter: 19.96 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.2 kg Special features Material: Special steel Workshop version Single gauge pin Application: end measurements / reference checks FAQ What is this gauge pin used for? This gauge pin is used for end measurements and reference checking in inspection and assembly tasks; the Metav IndustryLine gauge pin M323.J96 serves as a compact, repeatable reference. What tolerance does the pin provide? The pin is specified with an accuracy of ±0.002 mm, making it suitable for tight‑tolerance checks and fine fit verification. Which material is the pin made from? The pin is manufactured from special steel, chosen for wear resistance and stability under repeated use. Is the product traceable for procurement? Yes, the item is supplied with SKU M323.J96 and GTIN 4061905449758 for straightforward ordering and inventory management. Is this a workshop version tool? Yes, the design is a workshop‑grade configuration intended for robust daily use in production and maintenance settings. How heavy is the gauge pin? The pin has a mass of approximately 0.2 kg, allowing for secure handling while remaining easy to manoeuvre. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.97mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, sub-micron repeatability and compact handling for reliable end-dimension checks; order the component directly via Metav Werkzeuge or consult the Metav team for application advice. M323.J97 gauging pin – 19.97 mm diameter, 50 mm length (Metav IndustryLine) The M323.J97 gauging pin is a workshop-grade measuring pin designed for precise end-dimension verification in compact inspection setups. Workshop execution for daily shop use Diameter controlled to 19.97 mm Accuracy ±0.002 mm tolerance Made from special steel for durability Engineered for repeatable end-dimension checks The M323.J97 is designed as a purpose-built gage pin for fast verification of end dimensions and fit gauges. With a nominal diameter of 19.97 mm and an overall length of 50 mm, the pin falls into the micro measurement class (suitable for 10–100 mm ranges), which is ideal where compact geometry and stiffness matter together. The declared accuracy of ±0.002 mm supports repeatable pass/fail decisions on production lines and in inspection benches, reducing rework and measurement uncertainty while maintaining throughput. Robust construction that suits workshop demands Manufactured from special steel, this single-piece measuring pin resists wear in repetitive contact applications and preserves critical dimensions over long service intervals. The workshop execution emphasises usability: ergonomic handling, low mass (around 0.20 kg) and a finish that simplifies seating into fixtures and bore gauges. The choice of material and machining tolerances was made to balance lifetime stability with cost-efficiency, enabling frequent in-process checks without excessive tool replacement. Integrates simply into inspection and assembly workflows The pin is suitable for routine end-dimension and plug checks, and can be used directly in go/no‑go fixtures, gauge assemblies or as a reference master for quick comparative inspections. Its compact form factor facilitates easy storage alongside standard gauge sets and a short handling cycle minimises measurement time per part. For workshops seeking to raise process control without complex instrumentation, this gage pin provides a pragmatic route to tighter assembly tolerances and fewer quality excursions. Contact Metav Werkzeuge for tailored advice on integrating the M323.J97 gauging pin into inspection fixtures or to secure workshop-ready units for immediate use. Technical Data Article number: M323.J97 GTIN: 4061905449765 Label: Prüfstift, einzeln, 19,97 mm Länge 50 mm Brand: Metav IndustryLine Material: Special steel Weight: 0.20 kg Facts Diameter: 19.97 mm Length: 50 mm Accuracy: ±0.002 mm Measurement range: 19.97 mm Special features Workshop execution Single-piece gage pin Category: Measuring pins (gage pins) Suitable for end-dimension verification Intended for manual and fixture-based inspection FAQ What nominal diameter and length does this gage pin have? The M323.J97 gage pin is specified with a nominal diameter of 19.97 mm and an overall length of 50 mm for end-dimension checks. What tolerance can be expected from this measuring pin? Tolerance is declared as ±0.002 mm, providing the precision required for tight-fit inspections and repeatable go/no‑go decisions. Which material is used and how does it affect durability? The pin is manufactured from special steel; this material selection improves wear resistance and dimensional stability during repetitive contact checks. Can this pin be used directly in fixture-based gauges? Yes. The compact geometry and controlled diameter make the component suitable for mounting in go/no‑go fixtures, plug gauges and comparative inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.98mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
High-precision fit verification with a 19.98 mm diameter and ±0.002 mm tolerance paired with robust special steel construction ensures repeatable inspection results; the 50 mm length suits standard end‑measure checks. Delivered in a protective transport case, the pin supports reliable workshop routines. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for integration into production. Gauge pin M323.J98 – 19.98 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.J98 is a precision test pin intended for end‑measure and fit verification in workshop metrology and component inspection. Workshop version, robust construction Diameter 19.98 mm with ±0.002 mm tolerance Length 50 mm for end‑measure checks Supplied in protective transport case Precision that reduces rework and rejects The measuring pin delivers a high level of dimensional certainty with a stated tolerance of ±0.002 mm, making it suitable for tight fit and clearance checks where small deviations cause functional issues. With a nominal diameter of 19.98 mm, the component functions as a reliable reference for go/no‑go assessments and pass/fail checks, shortening inspection time and reducing the incidence of downstream rework. This focus on measurable accuracy supports faster quality decisions on the shop floor. Built for everyday workshop handling Designed as a workshop version, the pin is manufactured from special steel to withstand frequent handling while maintaining surface integrity. At 50 mm length the geometry suits standard end‑measure and plug checks without excess overhang, and the supplied protective case ensures safe transport and storage between uses. Classified in the micro range of measuring tools, it offers an optimum balance of rigidity and compactness for precise measurements in confined setups. Practical integration into inspection processes As a compact test pin, the item slots into established inspection routines with minimal adaptation: it can be used for hole gauging, fit verification, and end‑dimension control on assembly benches or measuring fixtures. The straightforward geometry supports rapid visual and tactile checks, while the tight tolerance improves statistical confidence in small‑batch sampling. The result is a measurable reduction in inspection cycle time and clearer pass/fail criteria for production teams. Procurement and quality assurance rationale Sourcing this precision pin from a specialist supplier provides a pragmatic supply‑chain advantage: consistent availability, a transparent quality filter and a broad portfolio minimise procurement risk. The measuring pin aligns with a workshop focus on dependable, repeatable tools that integrate into existing quality workflows and support compliance with internal inspection standards. Investing in clearly specified reference parts delivers operational stability and helps maintain production throughput. Contact Metav Werkzeuge today to discuss application suitability for the M323.J98 gauge pin and to arrange supply tailored to inspection needs Technical data SKU: M323.J98 GTIN: 4061905449772 Article name: Gauge pin, single, 19.98 mm, length 50 mm Facts Diameter: 19.98 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg ECLASS: 21170231 Special features Material: Special steel Workshop version Supplied in protective transport case Category: Gauge pin Intended use: End‑measure and fit verification FAQ Is this pin suitable for go/no‑go or fit checks? Yes. The gauge pin M323.J98, with its 19.98 mm nominal diameter and ±0.002 mm tolerance, is designed for fit verification and routine go/no‑go assessments in workshop inspection. Which materials and parts is the pin intended to check? The pin serves as a dimensional reference for metal components and machined holes in typical workshop environments; it is intended for verification of clearances and end‑dimensions rather than for machining operations. How does the workshop version differ from lab instruments? The workshop version prioritises robust handling and practical geometry for frequent use; while it maintains tight dimensional control, it is optimised for shop‑floor resilience rather than extended laboratory traceability. Is storage or transport provided for the pin? Yes. The M323.J98 is supplied in a protective transport case to prevent surface damage and to keep the pin ready for immediate use in inspection routines. Can the pin be used as a reference for fixture setup? Yes. Its precise diameter and compact length make the pin suitable as a setup or alignment reference in fixtures and measuring jigs for repetitive dimension checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.99mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Combining workshop-grade robustness, a nominal diameter of 19.99 mm and a documented accuracy of ±0.002 mm, this single gauge pin supports fast go/no‑go checks and repeatable end‑measurement tasks; order the item directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.J99 — single gauge pin, 19.99 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.J99 for precise dimensional checks and simple go/no‑go verification in industrial and workshop inspection routines. Single gauge pin 19.99 mm nominal High repeatability ±0.002 mm 50 mm length, special steel Workshop execution for robust use Consistent metrology where it matters The M323.J99 is engineered for reliable, repeatable verification during production and inspection. Its nominal diameter of 19.99 mm together with an accuracy of ±0.002 mm reduces ambiguity in tolerance checks and shortens decision loops on the shop floor. Specified tolerances are given as objective criteria for acceptance testing, which streamlines quality control and minimises rework. The result is measurable process stability rather than guesswork. Durable design for everyday workshop use Manufactured in special steel and provided in a workshop configuration, this test pin withstands routine handling and fixture engagement while maintaining dimensional integrity. The 50 mm length offers sufficient engagement depth for end‑measure and reference tasks without excess overhang, improving handling and fixturing. Robust construction and a compact form factor support fast inspection cycles and contribute to longer service intervals. Practical integration into inspection workflows The single pin format is ideal for targeted pass/fail inspections, setting reference gauges and batch sampling where simple, unequivocal results are required. Marked repeatability and the compact footprint make it easy to fit into existing inspection jigs or portable kits. Traceable measurement practice is supported by clear specification data, enabling consistent sampling plans and documented inspection outcomes across shifts and sites. Contact Metav Werkzeuge GmbH for tailored advice on implementing the M323.J99 gauge pin in production or inspection; email info@metav-werkzeuge.com or call +49 2822 7131930 for sample availability and technical guidance. Technical Data Article number: M323.J99 GTIN: 4061905449789 Manufacturer: Metav IndustryLine Facts Nominal diameter: 19.99 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.2 kg Special features Workshop execution Material: Special steel ECLASS: 21170231 FAQ What inspection tasks is this gauge pin suited for? The M323.J99 gauge pin is designed for end‑measurement checks, go/no‑go verification and reference tasks in workshop and light industrial inspection routines. How precise is the M323.J99 during routine measurements? The gauge pin offers an accuracy of ±0.002 mm, which supports clear go/no‑go decisions and high repeatability in dimensional sampling. Can the pin be used in existing jigs and fixtures? Yes, the 50 mm length and single‑pin format of the M323.J99 make it straightforward to incorporate into existing inspection jigs and portable test sets. What material is the M323.J99 made from and how does that affect use? Constructed from special steel, the M323.J99 provides robust contact surfaces for repeat measurements and resists deformation under normal workshop handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.9mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise ±0.002 mm tolerance, robust special steel construction and a workshop‑ready transport case for dependable end‑dimension verification; order the gauge pin directly via (Metav Werkzeuge) or ask our consultants if needed. Gauge pin, single — Ø 19.9 mm · 50 mm length (Metav IndustryLine) The gauge pin, single, Ø 19.9 mm, 50 mm length is a workshop‑grade inspection pin designed for accurate end‑dimension checks and assembly verification in production and maintenance environments. Ø 19.9 mm precision fit Tolerance ±0.002 mm Special steel construction Workshop version with transport case Precision for repeatable end‑dimension checks The inspection pin is manufactured to a tight tolerance of ±0.002 mm, delivering measurement stability suitable for fine workshop controls and final part acceptance. With a nominal diameter of 19.9 mm and a measuring length of 50 mm, the pin provides a consistent reference for plug and end‑face checks; this is particularly valuable when validating seating dimensions or clearance fits during assembly. The combination of exact diameter and low runout reduces rework and speeds up go/no‑go decisions in quality processes, translating into measurable time savings on repetitive checks. Built to withstand workshop handling Produced in special steel and specified as a workshop version, the pin balances hardness with toughness so that routine handling and light knocks do not compromise geometry. Supplied as a single, ready‑to‑use unit and presented in a transport case for safe storage, the item supports mobile inspection rounds and bench‑based verification alike. The robust finish simplifies cleaning and prevents contamination on mating surfaces, while the compact design makes integration into measurement jigs straightforward — ideal for production lines where space and repeatability matter. Practical benefits: fast inspection, fewer rejects Using a dedicated gauge pin for end‑dimension control streamlines inspection workflows: the clear size reference eliminates interpretation, reduces operator influence and shortens cycle times. The pin’s workshop configuration supports frequent handling and rapid checks during set‑up and production. Where traceability is required, the supplied product data and clearly defined specification facilitate documentation of inspection results and process decisions, helping to maintain consistent quality across batches and operators. For workshop‑grade accuracy with a ±0.002 mm specification, request the Metav IndustryLine gauge pin via Metav Werkzeuge — contact our advisors at info@metav-werkzeuge.com or +49 2822 7131930 for order guidance or compatibility notes Technical data Article number: M323.J90 GTIN: 4061905072550 Label: Gauge pin, single, 19.9 mm Ø, 50 mm length Manufacturer: Metav IndustryLine Weight: 0.2 kg Facts Diameter: 19.9 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.2 kg ECLASS: 21170231 Special features Workshop version Material: special steel Delivered in transport case Single inspection pin Application: end‑dimension verification FAQ What inspections is this pin best suited to? The gauge pin is intended for end‑dimension checks and plug‑fit verifications; the 19.9 mm diameter and 50 mm length make it suitable for checking seating diameters and clearance fits in workshop and production settings. Is the material specified for heavy‑duty environments? Manufactured from special steel and produced as a workshop version, the pin resists routine handling and is appropriate for standard industrial environments where robustness and dimensional stability are needed. How precise is the measurement standard of the pin? The inspection pin is specified to a tolerance of ±0.002 mm, offering high repeatability for go/no‑go checks and acceptance testing. Is the pin supplied ready for use and easy to store? Yes, the single pin is supplied in a transport case for safe handling and storage, supporting mobile inspection tasks and secure bench storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19–20mm Gauge Pin Set 101 pcs 0.01mm Graduations With Probe Holder In Case - Metav IndustryLine
Take advantage of high precision (±0.004 mm), a comprehensive 101‑piece range and robust storage in a protective case — order the kit directly via Metav Werkzeuge or contact our consultants for application advice. Test pin set M318.589 — 101‑piece, 19–20 mm range, 0.01 mm gradation (Metav IndustryLine) The Test pin set M318.589 is a compact precision kit designed for narrow‑tolerance checks and reference gauges in inspection and toolmaking environments. 101-piece test pin set, 19–20 mm range 0.01 mm increments for fine gradation High stability from special steel construction Supplied with holder and protective case Precise measuring increments that support reproducible inspection results The set provides 0.01 mm gradation across the 19–20 mm range, enabling finely stepped inspection sequences and setup routines. With an indicated measurement accuracy of ±0.004 mm, the kit supports tight tolerances in workshop and inspection tasks where reproducibility matters. The numbered, stepped pins reduce adjustment time during iterative checks and are particularly useful for establishing reference points on fixtures, gauges and measurement rigs. The combination of fine gradation and documented accuracy helps to reduce rework and shortens throughput time on quality‑critical components. Compact, high‑stability construction for routine workshop use Built from special steel and supplied with a dedicated holder, the pins are dimensionally stable and easy to handle during repetitive tasks. The collection is classified in the Mikro category (measurement range within 10–100 mm), so it is optimised for fine mechanical work, small assemblies and precision tool rooms. Organisation is simplified by the supplied protective case, which keeps every element organised and ready for transfer between bench and inspection area. The overall kit weight reflects a complete, workshop‑grade set that resists deformation and offers long service life under normal use. Practical applications and efficiency gains for production and inspection This kit excels in set‑up, go/no‑go checking, gauge blocks supplement and comparative inspection. The 101 pins permit incremental checks without repeated machining or multiple gauge changes, supporting faster machine set‑up and shorter inspection cycles. For small‑part production, toolmaking and quality control, the pin set replaces time‑consuming makeshift techniques and provides a reproducible basis for decisions. The holder speeds interchange and reduces handling error; the protective case keeps calibration intervals regular by protecting the pins during storage and transport. Contact Metav Werkzeuge for tailored application advice and to request the Metav IndustryLine Test pin set M318.589 from our Emmerich facility Technical Data Article number: M318.589 GTIN: 4054469156262 Manufacturer: Metav IndustryLine Facts Weight: 15.5 kg Pin length: 50 mm Measurement range: 19.0–20.0 mm Increment/step: 0.01 mm Indicated accuracy: 0.004 mm Pieces per set: 101 Special features Material: special steel With test pin holder Supplied in protective case (plastic or wooden) ECLASS: 21170231 Tariff number: 90173000 FAQ What measurement range does the set cover? The Metav IndustryLine Test pin set M318.589 covers a 19.0–20.0 mm range with 0.01 mm increments for fine adjustment. How accurate are the pins for inspection tasks? The kit is specified with an indicated accuracy of ±0.004 mm, making it suitable for tight tolerance checks and repeatable inspection routines. Is a holder included with the set? Yes — the set is supplied with a dedicated test pin holder to simplify handling and interchange during measurement and set‑up activities. How is the set supplied for transport and storage? The pins are supplied organised in a protective case (plastic or wooden), which keeps components secure and minimises risk of damage during transport or bench storage. What are the typical applications for this type of pin set? Typical uses include fixture set‑up, go/no‑go validation, comparative inspection and fine setting tasks in toolmaking and quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–10 mm Gauge Pin Set With Holder, 0.1 mm Steps, 91 Pieces, Case - Metav IndustryLine
Take advantage of a complete 91-piece inspection range with 0.1 mm gradation and robust special steel construction for consistent workshop control; the set arrives in a secure transport case and can be ordered directly via Metav Werkzeuge or discussed with our consultants for tailored advice. Pin Gauge Set M318.525 — 1.0–10.0 mm range, 0.1 mm increments (Metav IndustryLine) The Pin Gauge Set M318.525 is a versatile precision set for rapid verification of bore diameters and go/no-go checks in production and inspection environments. 91-piece set, 1.0–10.0 mm, 0.1 mm steps Special steel for long-term wear resistance Includes pin holder for stable handling Delivered in transport case for secure storage Reliable coverage for routine inspection work The 91-piece composition, covering 1.0–10.0 mm in 0.1 mm steps, provides an immediately usable span for typical workshop and inspection tasks. Such stepwise coverage simplifies diameter checks and reduces the need for additional measuring tools, which shortens setup time and minimises machine downtime. The listed technical accuracy of ±0.004 mm offers a predictable tolerance band for pass/fail decisions; explained simply, this means that measurements taken with these pins will stay within a few micrometres of the nominal size, enabling confident go/no-go testing without elaborate measurement routines. Built to withstand workshop conditions and stay precise Constructed from special steel, the collection resists typical wear from repeated seating and removal, which preserves diameter fidelity over long service periods. The inclusion of a pin holder improves handling ergonomics and repeatability by stabilising each gauge during insertion, while the transport case protects the pins during storage and transit — an important factor when tools are moved between job sites or shifts. Together these design choices translate to lower lifecycle costs and fewer tool replacements for busy production teams. Practical application and measurable benefits for quality control This set is intended for fast verification of bores, slots and gauge holes in assembly, jigging and first-article inspection. The clear gradation in 0.1 mm increments facilitates quick selection of the nearest nominal size for a go/no-go decision, reducing the cognitive load on operators and accelerating inspection throughput. The set is also suitable for use as a workshop reference during machine set-up, alignment checks and routine maintenance tasks, where consistent tactile feedback and repeatability are more valuable than complex measurement reports. For dependable, workshop-ready precision choose the Metav IndustryLine Pin Gauge Set M318.525 — request a quotation or technical consultation from Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to ensure the set meets specific inspection requirements Technical Data Article number: M318.525 GTIN: 4054469129150 ECLASS: 21170231 Category: Messstifte Facts Pieces: 91 Measuring range: 1.0–10.0 mm Increment: 0.1 mm Accuracy: ±0.004 mm Weight: 2.6 kg Length: 50 mm Tariff number: 90173000 Special features Material: Special steel With pin holder Delivered in transport case for transport Set for bore verification and go/no-go checks Packaged as a complete workshop set FAQ What sizes are included and how fine are the steps? The Pin Gauge Set M318.525 contains 91 pins covering 1.0–10.0 mm with 0.1 mm increments, allowing close selection of nominal diameters during inspection. Is the set suitable for repeated production checks? Yes, the Metav IndustryLine set is made from special steel and designed for frequent use; the durable material and transport case help preserve dimensional accuracy across many cycles. How does the pin holder improve measurement reliability? The included pin holder stabilises each gauge during insertion, reducing angular deviation and ensuring a more repeatable seating, which improves the reliability of go/no-go assessments with the M318.525 set. Can this set replace micrometres for everyday checks? The gauge pins are intended for quick verification and go/no-go testing rather than precise dimensional reporting; they complement micrometres by offering fast pass/fail assessment and alignment checks. Is the accuracy declared adequate for workshop quality control? With an accuracy of ±0.004 mm stated, the set supports typical workshop and shop-floor inspection requirements where rapid, repeatable verification is required rather than laboratory-level metrology. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–2 mm Gauge Pin Set 70 mm Step 0.01 mm, 101 Pieces In Plastic Case - Metav IndustryLine
Benefit from a 100-piece assortment that covers the 1.00–2.00 mm range in precise 0.01 mm steps, combined with a robust special‑steel construction and a compact 70 mm working length for reliable bore verification; order the gauge pin set directly via Metav Werkzeuge or consult our specialists for application advice. Pin Gauge Set M318.851 – 100-piece, 1.00–2.00 mm, 0.01 mm graduation (Metav IndustryLine) The Pin Gauge Set M318.851 is a compact inspection kit designed for accurate hole and bore gauging in production, maintenance and quality‑control environments. 100-piece set from 1.00 to 2.00 mm 0.01 mm graduation for fine increments 70 mm working length for deep bores Made from special steel for durability Accurate increments for faster inspection decisions A graduated pin set with 0.01 mm steps enables decisive go/no‑go checks where minute differences matter. The fine increments reduce interpolation and speed up tolerance assessment, so operators can document conformity or initiate corrective action with confidence. The 1.00–2.00 mm range is ideal for small‑bore components and precision fittings; selecting the correct pin size is straightforward and repeatable, which increases throughput in routine inspection tasks while reducing unnecessary rework. Durable materials and consistent handling for workshop use Constructed from special steel, the pins resist wear and maintain their diameter under frequent use, ensuring measurement stability over many inspection cycles. A 70 mm working length provides access into deeper bores without compromising control at the grip, making the set suitable for both bench and in‑machine checks. The material choice and dimensional stability together deliver long service life and minimise variability between successive measurements, supporting a dependable inspection routine that aligns with industrial quality demands. Practical organisation, traceability and calibration readiness The compact arrangement of the set keeps individual pins accessible and identifiable, which reduces handling time during repetitive checks. The set supports documentation of inspection results and simplifies traceability workflows in production and laboratory environments. Where formal verification is required, the set can be integrated into existing calibration schedules; clear identification (including SKU M318.851 and GTIN) eases record keeping for quality systems and batch traceability across the supply chain. For application-specific advice or to secure a set for your inspection bench, contact Metav Werkzeuge — our consultants will advise on suitability and supply options for Metav IndustryLine products. Technical data SKU: M318.851 GTIN: 4054469182032 Material: special steel Measurement range: 1.00–2.00 mm Graduation: 0.01 mm Working length: 70 mm Weight: 1.75 kg Facts Article type: pin gauge set Set composition: sequential pins within stated range Intended use: bore and hole gauging, go/no‑go checks Category: gauges / inspection tools Special features Compact organisation for fast selection Robust finish for workshop environments Suited to routine quality control tasks SKU reference for traceability: M318.851 FAQ Which sizes are included in the set? The set covers sizes from 1.00 mm to 2.00 mm in 0.01 mm increments, as supplied in the Pin Gauge Set M318.851. What material are the pins made from? The pins are manufactured from special steel, chosen for wear resistance and dimensional stability suitable for regular inspection use. How long are the pins and what applications suit that length? Each pin has a 70 mm working length, allowing access into deeper bores while maintaining control for bench‑level and machine‑side checks. Is the set suitable for production quality control? Yes—the sequential increments and durable construction make the set appropriate for routine production and maintenance inspections where repeatability is required. How is the set identified for traceability? Identification is facilitated by the SKU M318.851 and GTIN 4054469182032, which support documentation and integration into calibration schedules. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–2 mm Pin Holder For Go/No-Go Red Mount, Anodised Aluminium - Metav IndustryLine
Benefit from the compact, anodised aluminium NOGO measuring‑pin holder that accepts 1–2 mm pins, offers a clear red visual reference and a secure one‑sided mount; order the part directly via Metav Werkzeuge or ask our consultants for compatibility and fixture advice. Measuring‑pin holder NOGO — 1–2 mm, red anodised mount (Metav IndustryLine) Measuring‑pin holder NOGO, 1–2 mm red mount, one‑sided is a compact mounting solution for metrology fixtures and gauge assemblies, designed to accept measuring pins with diameters from 1 to 2 mm and to simplify non‑go control checks. Anodised aluminium construction Accepts measuring pins 1–2 mm Compact 46 mm length, 9 mm width Durable, corrosion‑resistant mounting for repeatable checks The holder is made from anodised aluminium, providing a corrosion‑resistant and lightweight base that preserves alignment in confined workstations. Its construction minimises weight without sacrificing stiffness, which helps maintain repeatability during frequent insertions and withdrawals of small probe pins. The product accepts 1–2 mm measuring pins and is configured as a NOGO variant, making it suitable for limit checks in gauges and fixtures where a defined non‑go condition must be enforced. This design reduces the risk of false positives and supports faster inspection cycles on the shop floor. Engineered for secure seating and reliable positioning Designed as a one‑sided mount, the holder locates pins precisely and prevents lateral play, ensuring consistent contact conditions during measurement runs. The secure seating reduces setup time and minimises measurement uncertainty introduced by pin movement, contributing directly to improved process efficiency. Integration into existing gauge plates or fixture blocks is straightforward thanks to the compact footprint and standardised pin acceptance, delivering a measurable improvement in throughput for routine quality checks. Compact form and clear visual identification for busy benches A small footprint (length 46 mm, width 9 mm) makes the holder ideal where space is limited or multiple checks must be arranged in close proximity. The red anodised finish provides immediate visual identification of the NOGO station within a set of gauges, which streamlines inspection workflow and limits operator confusion. The combination of compact dimensions, durable surface treatment and unmistakable colour coding supports organised workstations and helps maintain fast, error‑resistant inspection processes. For procurement and technical advice on the Metav IndustryLine measuring‑pin holder, contact Metav Werkzeuge directly at info@metav-werkzeuge.com or +49 2822 7131930 to confirm compatibility with existing fixtures and gauges. Technical data Article number: M318.567.2 Manufacturer: Metav IndustryLine Material: Aluminium, anodised Colour: Red Mounting: One‑sided NOGO acceptance Compatible pin diameter: 1–2 mm Core specifications Length: 46 mm Width: 9 mm Suitable pin diameter (min–max): 1–2 mm Special features For uptake of measuring pins Compact footprint for tight fixtures Red anodised for visual identification NOGO type for non‑go checks FAQ What pin diameters does this holder accept? The holder accepts measuring pins with diameters from 1 to 2 mm and is intended for small‑pin metrology applications. Is the mount suitable for use in gauge fixtures? Yes. The NOGO variant is designed for integration into gauge plates and fixtures where a defined non‑go limit is required. What material and finish does the part have? The component is made from anodised aluminium, offering corrosion resistance and a lightweight, stiff mounting surface. Can this holder be used in tight assemblies? Yes. With a length of 46 mm and a width of 9 mm, the holder is compact and appropriate for constrained layouts. How is the NOGO function reflected in the product? The NOGO designation indicates the holder is configured for non‑go checks, providing a physical stop or acceptance profile for limit testing. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–2 mm Probe Holder, Green One-Sided Aluminium Anodised, For 1–2 mm Test Pins - Metav IndustryLine
Take advantage of the combination of anodised aluminium construction, a compact 46 mm length and a clear green socket for fast identification; the result is a robust, cost‑effective holder that simplifies pin mounting and speeds up gauge assembly. Order the part directly via Metav Werkzeuge or consult our advisers for application support. Measuring Pin Holder (GO) — anodised aluminium, for 1–2 mm pins (Metav IndustryLine) The Measuring Pin Holder is a one‑sided, anodised‑aluminium holder designed for mounting 1–2 mm measuring pins in gauge fixtures and checking tools. Anodised aluminium body for durability and light weight Accepts measuring pins 1–2 mm One‑sided green socket for quick identification Compact dimensions: 46 mm length, 9 mm width Durable, lightweight construction that supports precision work The holder is manufactured from anodised aluminium, offering corrosion resistance and a reduced risk of wear where pins are installed. This compact design keeps added mass to a minimum while providing the necessary stiffness for repeatable positioning, making it suitable for small gauges and fixture components. With its clear green socket the component is easy to identify during assembly, which reduces setup time and lowers the risk of fitting the wrong element into a gauge stack. The result is a small but reliable mechanical part that contributes to consistent inspection routines. Accurate pin retention for reliable gauging and fixture use Designed specifically to accept 1–2 mm measuring pins, the holder secures probe elements with firm seating to avoid lateral play. This focused compatibility supports precise alignment in GO gauge applications and small inspection assemblies where repeatability is essential. The secure retention translates into fewer rejected measurements caused by movement of the measuring pin, helping to maintain quality control standards on the shop floor and in the inspection room. Simple integration into existing equipment and assemblies Owing to its modest footprint and straightforward geometry, the component integrates easily into custom fixtures, modular gauge blocks and test rigs. The compact 46 mm length and 9 mm width fit into tight spaces, enabling the construction of low‑profile assemblies without compromise. Where quick visual identification is needed during repetitive operations, the green socket provides a practical cue for operators and reduces the cognitive load during batch inspection work. Practical choice for workshop and production environments As a purpose‑built holder for measuring pins, this component delivers a balance of durability and economy. The anodised aluminium construction minimises maintenance while providing a stable platform for repeated use. For teams standardising on compact, easily serviceable gauge elements, this holder is a straightforward part to stock: it supports efficient assembly, helps to reduce error rates, and is robust enough for everyday industrial handling. For reliable fixture components and fast delivery, request the Metav IndustryLine measuring pin holder via Metav Werkzeuge in Emmerich — technical consultants are available to advise on integration and compatibility; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: M318.566.2 Name: Measuring pin holder, GO, 1–2 mm, green socket Manufacturer: Metav IndustryLine Facts Length: 46 mm Width: 9 mm Accepts pins: 1–2 mm Colour: green Special features Anodised aluminium body One‑sided green socket For mounting measuring pins FAQ What pin diameters are compatible with this holder? The holder accepts 1–2 mm measuring pins and is intended for secure mounting of those probe elements in gauge fixtures. What material and finish does the holder have? The holder is made from anodised aluminium, providing corrosion resistance and a light‑weight design suitable for repeated workshop use. Is the green socket functional or merely cosmetic? The green socket provides quick visual identification and aids efficient assembly in gauge sets and fixture arrangements. Can this component be used in GO gauge applications and small fixtures? Yes — the measuring pin holder is designed for GO‑type mounting and small inspection assemblies, offering stable pin retention for reliable gauging. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–2mm Gauge Pin Holder Double-Sided Green/Red - Metav IndustryLine
Take advantage of the compact format, anodised aluminium construction and clear double-sided GO‑NOGO indication to speed up visual acceptance checks and reduce setup time; order the holder directly via Metav Werkzeuge or contact our consultants for specification advice. Test Pin Holder GO‑NOGO — double-sided 1–2 mm, anodised aluminium (Metav IndustryLine) A Test Pin Holder GO‑NOGO designed for quick visual acceptance checks and straightforward integration into gauges and inspection fixtures for small-diameter measuring pins. For 1–2 mm gauge pins Anodised aluminium body Double-sided GO‑NOGO indication Compact 58 mm length for fixtures Increase inspection throughput with clear GO‑NOGO feedback The double-sided GO‑NOGO design provides an immediate visual decision, reducing cycle time in repetitive acceptance tasks. The red/green colour coding supports fast sorting at inspection stations and minimises interpretative errors, which improves throughput and reduces rework rates. As a compact gauge accessory, the holder is dedicated to reliably positioning 1–2 mm measuring pins, ensuring consistent contact and repeatable checks without complex setup. Lightweight, corrosion-resistant construction for durable use Constructed from anodised aluminium, the holder combines low weight with surface protection against abrasion and environmental effects. This material choice keeps the component dimensionally stable while resisting common workshop contaminants, so the holder maintains fit and function in busy production environments. The robust finish supports long-term visual contrast between the coloured faces and the metal body for continuous GO‑NOGO clarity. Small footprint for seamless fixture integration With a 58 mm length and a narrow profile, the holder fits into compact jigs and gauge plates where access is limited. The slim geometry enables multiple holders to be mounted in proximity for multi-point checks, without introducing excessive bulk. Its modest dimensions make it particularly suitable for retrofitting existing inspection fixtures or designing bespoke gauge blocks where space economy and rigidity are both required. Accurate pin acceptance and stable positioning Designed specifically for the reception of measuring pins from 1–2 mm, the holder secures pins with consistent alignment so that repeatability is governed by the fixture rather than the operator. Stable pin retention simplifies transfer between gauging stages and supports reliable pass/fail evaluation when combined with visual or mechanical inspection processes. The straightforward acceptance range is ideal for small-part inspection in metalworking and assembly. Practical accessory that supports lean inspection workflows As a purpose-built accessory, the holder reduces handling steps and simplifies visual decision-making in quality control loops. The colour-coded faces and hardened mounting surfaces contribute to fewer stoppages and clearer process signals on the shop floor. Integrated into a lean layout, the holder helps maintain steady cycle times while offering a cost-effective solution to standardised acceptance testing. For procurement or integration assistance with Metav IndustryLine gauge accessories, contact Metav Werkzeuge for tailored advice and prompt dispatch from Emmerich Technical data Article number: M318.568.2 Manufacturer: Metav IndustryLine For measuring pins: 1–2 mm Material: aluminium, anodised Colour: green - red Dimensions Length: 58 mm Width: 9 mm Special features Double-sided GO‑NOGO indication (green / red) For inclusion in gauges and fixtures Compact, lightweight design For reception of measuring pins 1–2 mm FAQ What pin sizes does the holder accept? The Test Pin Holder GO‑NOGO accepts measuring pins from 1–2 mm and is manufactured by Metav IndustryLine (Article number M318.568.2) for straightforward integration in small-part gauges. Is the holder suitable for retrofit into existing fixtures? Yes, the compact 58 mm length and slim profile allow the holder to be mounted into existing gauge plates and jigs for additional GO‑NOGO checks without major alterations. How does the double-sided GO‑NOGO display work? The two-colour faces provide immediate visual pass/fail feedback: one side indicates GO (green) and the opposite indicates NOGO (red), enabling quick decisions during inspection routines. What material is used and how durable is it? The holder is made from anodised aluminium, offering a balance of lightness, dimensional stability and surface resistance suitable for regular workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–2mm Gauge Pin Set 70mm Length 0.05mm Steps in Plastic Case - Metav IndustryLine
Combine precise diameter grading, a 70 mm pin length and resilient special steel for reliable tolerance checks and repeatable inspection results. Order the gauge pin set directly via Metav Werkzeuge or consult our advisors if application-specific guidance is required. Gauge pin set M318.821 — Metav IndustryLine | 1.00–2.00 mm, 70 mm pins The Gauge pin set M318.821 is designed for precision tolerance checks and diameter verification in workshop and inspection environments. Precision pins 1.00–2.00 mm range 0.05 mm incremental steps 70 mm length for deeper bores Delivered in protective case Precision that speeds up inspection The M318.821 kit provides a compact series of 21 pins covering the 1.00–2.00 mm range in 0.05 mm steps, offering a fast, straightforward method for verifying hole diameters and calibration masters. Each gauge pin serves as a tactile reference for go/no-go checks and quick pass/fail decisions, reducing measuring time compared with repeated micrometre setups. The fine gradation supports controlled acceptance limits, improving throughput in routine quality checks without sacrificing precision. Robust build for reproducible results Manufactured from special steel, the pins combine dimensional stability with wear resistance suitable for workshop use. The consistent material and finishing help maintain repeatability across frequent contact measurements; pins resist minor abrasion and preserve diameter integrity over many cycles. The 70 mm length allows access to deeper bores and recessed features while maintaining stiffness for accurate seating. A protective case reduces handling damage and keeps the set organised for reliable day-to-day inspection. Practical kit for inspection workflows and small-batch production This gauge set integrates simply into inspection benches and portable tool kits. The graduated steps mean fewer instrument changes and a reduced setup burden when checking families of components. The compact arrangement supports fast selection and clear traceability during assembly or incoming inspection. As a workforce enabler, the set helps workshops and small-scale production lines to implement consistent measurement routines without complex calibration equipment, promoting efficient quality control. Discuss specific tolerance requirements with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability for your inspection tasks Technical data Article number: M318.821 GTIN: 4054469181936 SKU: M318.821 Facts Measurement range: 1.00–2.00 mm Increment: 0.05 mm Pin length: 70 mm Pieces per set: 21 Weight: 0.7 kg Special features Material: special steel Delivered in protective case Set type: gauge pin set Application: diameter verification, tolerance checks, inspection FAQ What sizes are included in the set? The set includes 21 pins spanning the range 1.00–2.00 mm in 0.05 mm increments for fine-grained diameter checks. Is the material specified for workshop durability? The pins are made from special steel, providing wear resistance and stability suitable for regular inspection use. Can the pins reach recessed bores and deeper features? Yes, the 70 mm pin length allows access to deeper bores while maintaining sufficient stiffness for accurate seating. Is a calibration certificate supplied with the kit? No calibration certificate is included by default; the M318.821 set is supplied as a ready inspection tool without a calibration document. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2,01-3mm Gauge Pin Set 100 Pieces Step 0.01mm in Case - Metav IndustryLine
Highly repeatable gauging and fine gradation make this set ideal for routine quality control and small‑bore verification; the 0.01 mm increments across the 2.01–3.00 mm range ensure rapid identification of out‑of‑tolerance conditions while the robust construction supports long service life. Order the test pin set directly via Metav Werkzeuge or ask our consultants if needed. Test pin set – 100-piece gauge pins, 2.01–3.00 mm, 0.01 mm increments (Metav IndustryLine) A Test pin set for precise plug‑gage checks and repeatable bore verification in metrology and workshop quality control *100-piece set for systematic gauging *Diameter range 2.01–3.00 mm in 0.01 mm steps *Special steel for dimensional stability *Supplied in protective case for transport Faster, more reliable small‑bore inspection The 100-piece set offers a continuous series of gauge pins in 0.01 mm steps across the 2.01–3.00 mm band, enabling fast go/no‑go decisions and minimising adjustment iterations. The fine gradation reduces interpolation and the need for makeshift fits, so process control becomes more efficient and less error‑prone. With an indicated accuracy of ±0.002 mm, these pins support tight tolerance checks where standard workshop checks would otherwise be inconclusive. Durable construction that keeps measurements stable Manufactured from special steel, the pins provide high wear resistance and stable dimensions under normal workshop handling. The material choice prioritises dimensional stability and surface integrity, reducing the frequency of rework or replacement. The set is delivered in a protective case designed for safe transport and organised storage, preserving calibration intervals and keeping the pins sorted for swift retrieval during inspection tasks. Designed for everyday metrology and process integration As a compact, micro‑range solution (Micro classification), the set is tailored for fine mechanical parts, watchmaking, instrument work and precision assemblies where small bores are common. The systematic pin sequence simplifies documentation of pass/fail results and integrates directly with existing inspection routines in machine shops and quality departments. Use of gauge pins shortens inspection time and supports consistent traceability in production control. For reliable dimensional control and practical advice on selecting the right gauge range, contact Metav Werkzeuge for the Metav IndustryLine test pin set M318.552 at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M318.552 GTIN: 4054469129358 Manufacturer: Metav IndustryLine Facts Measuring range: 2.01–3.00 mm Increment: 0.01 mm Accuracy: ±0.002 mm Pieces per set: 100 Weight: 1.8 kg Pin length: 50 mm Special features Material: Special steel Supplied in protective case for transport and organised storage Step size per pin: 0.01 mm Classification: Micro range (measuring range up to 10–100 mm) Customs tariff number: 90173000 FAQ What material are the pins made from? The pins in this Test pin set are manufactured from special steel, chosen for wear resistance and dimensional stability. What level of accuracy can be expected? The gauge pins are specified with an accuracy of ±0.002 mm, suitable for fine workshop controls and precision verification. Is the set ready for immediate use upon delivery? Yes, the Test pin set is supplied in a protective case and is ready for immediate use in inspection routines. Which diameter range does the set cover? The set covers gauge diameters from 2.01 mm to 3.00 mm in 0.01 mm increments, enabling close‑spaced checks. Can this set be used for bore checking and plug gauging? The pin sequence and fine step size make the set ideal for plug gauging and rapid bore verification in small components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2,01-3mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 2,01-3mm- Stufung: 0,01mm- Anzahl/Satz: 100
2-3mm Gauge Pin Set 101pcs 70mm 0.01mm Graduation In Plastic Case - Metav IndustryLine
Die 100-piece Pin gauge set M318.852 delivers repeatable small-bore verification thanks to its 2.00–3.00 mm range, 0.01 mm increments and 70 mm pin length, all made from special steel and supplied in a protective case. Order directly via Metav Werkzeuge or consult our specialists for application advice. Pin gauge set M318.852 — precision cylindrical gauges, 2.00–3.00 mm, 0.01 mm steps The Pin gauge set M318.852 is a compact range of precision cylindrical gauges designed for reliable verification of small bores, plug gauges and tooling controls in industrial metrology. High-resolution 0.01 mm increments Range 2.00–3.00 mm 70 mm nominal pin length Supplied in protective case Consistent small-bore verification for production control High-frequency inspection of small holes and bores demands repeatability and straightforward handling. The set’s 0.01 mm step size provides fine gradation for incremental checking across the 2.00–3.00 mm range, reducing guesswork during pass/fail decisions. Made from special steel, each cylinder delivers stable contact geometry so that measurements remain consistent across repeated use, supporting faster quality checks on workpieces, jigs and assemblies. Traceability and measurable precision for integration in QC For systematic quality control, numerically precise increments and a defined nominal pin length of 70 mm ease traceability in inspection reports and preparation of test procedures. The fine graduation aids in establishing clear tolerance bands for small-diameter features. When recorded as part of a measurement routine, the set helps maintain documented verification steps that support internal audits and process stability in machining and assembly operations. Practical handling, storage and workshop suitability The set is supplied in a protective case to keep the gauges organised and protected during transport and storage, improving turnaround in the workshop. At a manageable total weight of 1.82 kg, the set is convenient to carry between bench and machine. The compact format fits inspection stations and reduces setup time when switching between successive checks, contributing to smoother production flow and fewer interruptions. Contact Metav Werkzeuge today for availability, technical clarification and local delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 — secure the precision pin gauge set that matches inspection requirements. Technical data Article number: M318.852 GTIN: 4061905450174 Material: Special steel Nominal pin length: 70 mm Measuring range: 2.00–3.00 mm Graduation/increment: 0.01 mm Weight: 1.82 kg Supplied in protective case Facts Range min: 2.00 mm Range max: 3.00 mm Increment: 0.01 mm Nominal length: 70 mm Total weight: 1.82 kg GTIN: 4061905450174 Special features Precision cylindrical gauge pins Set format for consecutive diameters Special steel construction Protective transport and storage case FAQ What measurement range does the set cover? The pin gauge set M318.852 covers diameters from 2.00 mm to 3.00 mm in 0.01 mm steps. Are the gauges supplied protected for workshop use? Yes, the M318.852 set is supplied in a protective case to keep the pins organised and secure during storage and transport. Which material are the pins made from? The pins in this set are manufactured from special steel, a material selected for dimensional stability and workshop durability. Is the set suitable for repeatable inspection tasks? The fine 0.01 mm graduation and consistent pin geometry make the M318.852 well suited to repeatable verification and routine quality checks. Can the gauges be used for calibration reference? The set provides precise incremental diameters useful for verification tasks; any formal calibration or certificate requirements should be checked with Metav Werkzeuge to confirm traceability and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.00mm Test Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Combine workshop‑grade robustness with micrometric tolerance ±0.001 mm and a compact 50 mm length for reliable end‑dimension verification; ideal where repeatable, traceable gauges are required. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — 2.00 mm, ±0.001 mm, 50 mm (Metav IndustryLine) Gauge pin, single — 2.00 mm, ±0.001 mm, 50 mm (Metav IndustryLine) is a precision test pin designed for end‑dimension checks and plug‑gauge applications in workshop and inspection environments Workshop-grade execution Diameter 2.00 mm, tolerance ±0.001 mm 50 mm overall length for end measurements Supplied in protective transport case Precise end‑dimension verification with micrometric repeatability The M323.200 gauge pin offers a nominal 2.00 mm diameter with a guaranteed ±0.001 mm tolerance, delivering the dimensional certainty required for tight clearance and plug‑fit assessments. Such a narrow tolerance reduces rework by ensuring components meet specification at first inspection; the small form factor makes the pin suitable for confined bores and fine mechanical parts. The clearly specified tolerance permits direct comparison against drawing limits and supports objective go/no‑go decisions during assembly and quality control. Robust workshop design for daily inspection routines Built as a workshop‑grade tool, the pin is machined from special steel selected for wear resistance and dimensional stability. The 50 mm length balances reach with rigidity, helping to avoid deflection during insertion. Supplied in a protective case, the measuring pin remains protected in transport and storage, preserving the hardened surface and maintaining long service life. The modest mass also makes the pin easy to handle for repetitive checks, supporting efficient throughput on the shop floor. Streamlined integration into quality control processes The simple geometry of the measuring pin makes it straightforward to incorporate into existing gauge sets, bore gauges and comparison fixtures. Clear identification by SKU and GTIN ensures traceability in inventory and inspection records, while the defined tolerance supports statistical process control and acceptance protocols. Using a standardised test pin like this reduces variation between operators and provides a consistent reference for final‑dimension verification across production batches. Practical handling and inspection benefits Ergonomic handling and a wear‑resistant finish mean quicker measurement cycles and reduced downtime for replacement. The compact design is ideal for small bores and tight features where larger gauges are impractical. Delivered ready for use in a transport case, the pin can be stored safely between shifts and transported between workstations without risk of damage, helping maintain measurement integrity and minimise disruption to inspection workflows. For workshop inspection and reliable end‑measurements, choose the Metav IndustryLine gauge pin M323.200 — contact Metav Werkzeuge for supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.200 GTIN: 4061905056727 Label: Gauge pin, single, 2.00 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Measurements and tolerances Diameter: 2.00 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Materials and special features Material: Special steel Workshop execution Supplied in protective transport case Category: Gauge pins (Messstifte) FAQ What diameter and tolerance does this pin provide? The gauge pin M323.200 from Metav IndustryLine has a nominal diameter of 2.00 mm with a stated tolerance of ±0.001 mm, suitable for high‑precision end‑dimension checks. Is the pin suitable for repeated workshop use? Yes, the workshop‑grade construction and special steel finish make the pin resilient to frequent handling; it is supplied in a protective case to preserve surface condition between uses. Can this pin be integrated into existing gauge sets? The simple, standard geometry of this measuring pin allows straightforward integration into plug‑gauge holders and comparison fixtures for routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.01-3.00 mm Gauge Pin Set With Pin Holder 0.01 mm Graduation - Metav IndustryLine
Data inconsistency: the product is labelled as a 101-piece gauge pin set but the provided data lists 100 pieces; this discrepancy raises concerns about the accuracy of the information presented. It is essential to verify the correct set size to ensure that customers receive accurate details about the product they are purchasing. Misrepresentation of the set size could lead to confusion or dissatisfaction among buyers, potentially impacting trust in the product or brand. Please review the data thoroughly and confirm whether the set includes 101 pieces as labelled or 100 pieces as listed before publishing the final product description.
2.01mm Test Pin 50mm Length ±0.001 mm Workshop Version - Metav IndustryLine
Take advantage of precise end‑dimension control with a nominal diameter of 2.01 mm and a verified accuracy of ±0.001 mm; the workshop‑grade special steel construction and 50 mm length ensure stable handling and repeatable inspection results. Order the gauge pin directly via Metav Werkzeuge or consult the technical advisors for specification support. M323.201 — Gauge pin (single) Ø 2.01 mm, ±0.001 mm, 50 mm, Metav IndustryLine M323.201 is a single precision gauge pin intended for fine mechanical inspection and end‑dimension checks in workshop and small‑part inspection environments. Nominal diameter 2.01 mm Tolerance ±0.001 mm Length 50 mm Special steel workshop finish Precision where tight fits matter The M323.201 delivers substantial measurement confidence for micro‑components thanks to a guaranteed dimensional tolerance of ±0.001 mm. Such a narrow allowance is suitable for critical pass/fail checks on mating holes, pin fits and end dimensions where repeatability is paramount. The tight specification reduces rework and helps maintain consistent assembly quality across production batches. By converting nominal diameter and tolerance into predictable inspection outcomes, the pin supports efficient quality control procedures and shortens decision cycles at the inspection bench. Robust material and handling benefits for daily use Constructed from special steel, the pin combines wear resistance with dimensional stability under typical workshop conditions. The 50 mm shaft gives enough engagement depth for most small parts while remaining compact for handheld use and fixture mounting; the balanced length reduces bend and ensures reproducible seating during inspection. Where operators perform many repetitive checks, the material choice and the workshop finish minimise surface wear, maintaining the pin’s functional geometry and preserving calibration intervals. Clear application logic for process reliability Designed for fine mechanical and end‑mass checks, this single gauge pin is aimed at precision shops, toolmakers and quality laboratories performing small‑part verification. The nominal Ø 2.01 mm corresponds to micro‑component inspection ranges and is especially useful for verifying bore sizes, locating holes and validating pin fits in assemblies. Using a dedicated, single‑diameter gauge pin avoids ambiguity in go/no‑go assessments and simplifies insertion checks during incoming inspection or final quality validation. Integration into inspection workflows The pin’s compact geometry and exact tolerance facilitate straightforward use with vises, plug gauges and bench fixtures commonly found in small workshops. Its repeatable performance supports statistical process control by providing consistent reference measurements that feed into capability studies and inspection logs. When recorded in inspection routines, the measured stability from the pin contributes to fewer false rejects and better traceability of dimensional trends in serial production. Contact Metav Werkzeuge today to specify the M323.201 for precision end‑dimension checks and secure supply from Emmerich. Technical data Article number: M323.201 GTIN: 4061905056734 SKU: M323.201 Numbers Length: 50 mm Nominal diameter: 2.01 mm Accuracy / tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop version Material: Special steel Category: Gauge pin / Test pin FAQ What inspection tasks is this gauge pin suited for? The M323.201 gauge pin is intended for fine mechanical inspections such as bore checks, pin‑fit tests and end‑dimension verification on small components where a 2.01 mm reference is required. How precise is the M323.201 for routine quality control? With a tolerance of ±0.001 mm, the M323.201 provides high repeatability suitable for tight tolerance checks and reliable pass/fail decisions in production control. Can the gauge pin be used in fixtures or plug assemblies? Yes. The 50 mm length and workshop finish make the pin suitable for fixture mounting and use in assembly jigs, enabling consistent seating and repeatable measurement conditions. What maintenance keeps the pin in specification? Routine cleaning and protection from abrasive contamination will preserve the surface and geometry; periodic inspection against a calibrated master ensures continued dimensional conformity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.02mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial‑grade accuracy (±0.001 mm), a stable 2.02 mm diameter and a compact 50 mm length to ensure reproducible end‑measurements and fast fit checks on the shop floor. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.202 – single test pin, 2.02 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The gauge pin M323.202 is a compact workshop test pin designed for precise end‑measurements and fit verification in confined or series inspection tasks. High‑precision ±0.001 mm tolerance Compact 2.02 mm diameter for fine fits Robust special steel construction 50 mm length for secure contact and reach Precision that secures assembly tolerances A high degree of measuring certainty is essential for reliable parts inspection. With a declared tolerance of ±0.001 mm, this single test pin provides the metrological stability required for micro‑fits, plug gauges and end‑measure checks. The small nominal diameter of 2.02 mm makes the component suitable for tight bores and fine mechanical interfaces; the narrow profile reduces interference during insertion and supports fast, repeatable checks. The combination of these features helps to reduce rework and process variability in routine quality control. Built for repeatable inspection and fast go/no‑go checks The elongated 50 mm shaft delivers secure engagement with the measured feature and permits consistent contact geometry on every measurement. At approximately 0.004 kg, the element is light enough for handheld gauging yet rigid enough to avoid unwanted bending during short, repetitive operations. The workshop specification ensures a balance between robust handling and dimensional integrity, so the pin is effective for both bench and fixture use when verifying end dimensions or mating fits. Integrates into existing measurement routines with minimal setup Designed as a single, purpose‑driven test element, this gauge pin slots into established inspection routines without the need for special adapters. Its compact size allows access to restricted zones that larger gauges cannot reach, while the straightforward geometry simplifies traceability in inspection logs. Using a standard, single‑element pin speeds up cycle times for checks that would otherwise require more complex tooling, supporting lean inspection workflows and faster throughput. Durable material choice and dependable provenance Manufactured from special steel, the pin resists wear under normal contact use and maintains dimensional stability across repeated cycles. As part of the Metav IndustryLine, the component benefits from a supplier network focused on dependable supply and consistent quality control—attributes that matter when the same gauge is used across multiple shifts and operators. For applications where traceability or certification is required, Metav Werkzeuge can advise on calibration options and documentation to match quality‑management needs. For proven small‑diameter gauging components from Metav IndustryLine, contact Metav Werkzeuge for technical guidance and order processing — rapid supply from Emmerich ensures the test pin reaches the workshop when required. Technical Data Article number: M323.202 GTIN: 4061905056741 Manufacturer: Metav IndustryLine Core technical data Diameter: 2.02 mm Length: 50 mm Tolerance/accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Version: workshop execution Application: end‑measurements, fit verification Story trigger: end measurements FAQ What level of accuracy does this test pin offer? The gauge pin M323.202 is specified with an accuracy of ±0.001 mm, making it suitable for high‑precision end‑measurements and fit checks in workshop inspection routines. Is the pin suitable for use in small bores or threaded holes? Yes. The 2.02 mm diameter and compact profile are specifically intended for narrow bores and fine fit verifications where access is restricted. What material is the pin made from and how durable is it? The shaft is manufactured from special steel, selected to retain dimensional stability and resist wear under normal inspection cycles. Can the pin be used in fixture or bench‑mounted gauges? The 50 mm length and robust shaft permit integration into simple fixture setups or handheld checks; Metav Werkzeuge can advise on fixturing options for series testing. Does the product come with manufacturer identification for traceability? The product is supplied as part of the Metav IndustryLine range (SKU M323.202, GTIN 4061905056741), which supports traceability in documented inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.03mm Gauge Pin Length 50mm ±0.001mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance, compact form and workshop‑ready protection for repeatable end‑measure checks. Order directly via Metav Werkzeuge or consult our specialists for specification support and rapid delivery. Gauge pin M323.203 – 2.03 mm ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.203 is a precision reference pin for end‑measure checking and fixture setting in metrology and workshop inspection. Precision diameter 2.03 mm ±0.001 mm 50 mm special steel shaft Workshop version with transport box Consistent reference for end‑measure and plug‑gauge tasks A compact reference element with a 2.03 mm nominal diameter and ±0.001 mm tolerance, this pin provides a stable benchmark for repeatable end‑measure checks and go/no‑go testing. The fine tolerance reduces uncertainty when dimensioning small bores or aligning precision fixtures, which lowers rework rates and shortens inspection cycles. The small mass and simple geometry make it straightforward to integrate into pin stacks or master gauge sets while maintaining consistent contact conditions. Robust handling and protected transport for shop use Designed as a workshop edition, the pin is made from special steel and supplied in a protective transport box to preserve the measuring surface during storage and shipment. The form‑stable shaft and clean finish minimise surface damage and ensure longevity under regular use. The product’s low weight and slim profile support rapid handling on the shop floor and reduce operator fatigue when performing repetitive reference measurements. Fast integration into quality workflows and fixture setups As a dedicated gauge element, the pin supports quick fixture setting, alignment and verification tasks without complex preparation. Its precise diameter is suited to fine bore checks and comparator fixtures, enabling technicians to make immediate pass/fail decisions and maintain throughput. Using standardised reference pins in inspection sequences simplifies documentation and contributes to stable process capability metrics. Choose the Metav IndustryLine gauge pin M323.203 for precise, repeatable end‑measure work and contact Metav Werkzeuge for tailored advice and reliable dispatch from Emmerich Technical data Article number: M323.203 GTIN: 4061905056758 Label: Gauge pin, single, 2.03 mm, ±0.001 mm, length 50 mm Facts Diameter: 2.03 mm Length: 50 mm Tolerance/accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop version Delivery: transport box FAQ What material is the gauge pin made from? The Metav IndustryLine gauge pin M323.203 is manufactured from special steel for stable dimensions and wear resistance in routine inspection tasks. Is the pin supplied with a calibration certificate? The gauge pin M323.203 is supplied as described; a calibration certificate is not included in the standard delivery unless explicitly stated for the specific product version. Can this pin be used for small bore inspection and setting of fixtures? Yes, the 2.03 mm diameter and tight ±0.001 mm tolerance make it suitable for small bore checks and for use as a reference when setting inspection fixtures and pin stacks. How should the gauge pin be stored to maintain accuracy? Store the pin in its transport box and avoid contact with abrasive surfaces or corrosive environments; keep in a dry, temperature‑stable location to preserve surface integrity and dimensional stability. Is the gauge pin suitable for repeated shop‑floor use? The workshop design and protective packaging of the Metav IndustryLine gauge pin M323.203 support regular shop‑floor use; the special steel construction balances durability with precision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.04mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme precision, workshop-hardy design and compact handling for reliable in-process checks; order the test pin directly via Metav Werkzeuge or consult our specialists for tailored inspection setups. Test pin M323.204 — single precision probe, 2.04 mm diameter, ±0.001 mm Test pin M323.204 is a compact inspection probe for pinpoint dimensional checking in precision workshops and quality departments. Workshop grade, robust design High precision ±0.001 mm tolerance Diameter 2.04 mm for fine measurements Compact length 50 mm for tight spaces Precision checking for micro components that saves rework The M323.204 test pin is designed for micro-range verification where smallest deviations matter: with a nominal diameter of 2.04 mm and a tolerance of ±0.001 mm, this probe provides repeatable contact checks for small bores, pin gauges and end measurements. Manufactured from special steel, the probe resists wear while keeping surface contact stable; the compact 50 mm length aids access to confined features. Engineers benefit from clearer go/no-go decisions and fewer rejected parts thanks to the pin’s consistently tight tolerances. Workshop robustness plus traceable inspection routines Built as a workshop-execution instrument, the probe balances hard-wearing construction with metrological accuracy. The fine tolerance reduces uncertainty in routine inspection, cutting down cycle time for batch sampling and supporting quicker process adjustments. Where traceable records are required, the pin serves as a reliable reference element within fixture checks and end‑of‑line control sequences. The compact geometry makes it suitable for handheld gauges as well as fixed checking fixtures, enabling integration into existing measurement stations without major rework. Simple handling, clear fit into measurement systems Handling remains straightforward: the small mass and short shank ease positioning, while the hard steel construction tolerates repeated contact. The probe is suited to component classes in toolmaking, small-part assembly and precision engineering that demand micro-scale verification. For compatibility, the item can be used alongside standard gauge holders and depth stops; careful mounting ensures the ±0.001 mm performance is translated into reliable plant-level results. The clear specification of diameter and length supports documentation and part traceability during audits. Contact Metav Werkzeuge for advice on integrating the M323.204 into inspection workflows or to request ordering information through our Emmerich supply channel Technical data Article number: M323.204 GTIN: 4061905056765 Manufacturer: Metav IndustryLine Facts Diameter: 2.04 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop execution High-precision finish Suitable for fine bore and end‑measure checks FAQ What applications suit this test pin best? The M323.204 test pin from Metav IndustryLine is intended for fine bore checks, end‑measure verification and precision fixture testing where a 2.04 mm diameter probe with ±0.001 mm tolerance is required. Is the pin suitable for repeated contact in a production environment? Yes, the workshop‑grade construction and special steel material make the probe resilient to repeated use, ensuring dimensional stability across inspection cycles. Can the probe be used with standard gauge holders? The probe’s compact 50 mm length and standardised shank dimensions allow it to be mounted in common gauge holders and fixture systems without additional modification. How is measurement uncertainty managed when using this probe? Manage uncertainty by securing the probe to a stable holder, controlling contact force during measurement and performing regular fixture checks; the probe’s ±0.001 mm tolerance provides a tight baseline for such procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com