Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
50 mm Gauge Pin 10.12 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Precision end-dimension control combined with robust workshop construction ensures consistent inspection results and long service life. Use the nominal 10.12 mm diameter, a precise ±0.002 mm tolerance and the 50 mm shank to standardise routine checks. Order the gauge pin M323.A12 directly via Metav Werkzeuge or ask our consultants if needed. M323.A12 gauge pin — single inspection pin, 10.12 mm diameter, 50 mm length (Metav IndustryLine) M323.A12 gauge pin is a single inspection pin designed for accurate end‑dimension verification and everyday workshop use. High-precision ±0.002 mm tolerance Diameter 10.12 mm, length 50 mm Workshop-grade special steel construction Reduce rework with repeatable, measurable accuracy This inspection pin provides reproducible measurements for end‑dimension checks thanks to its ±0.002 mm manufacturing tolerance. The tight tolerance is meaningful in applications where minute deviations lead to assembly problems or part rejection: using a measured reference pin reduces subjective assessment and supports objective quality decisions. In practice, a consistent reference standard accelerates pass/fail decisions on production lines and minimises rework cycles, contributing to measurable time savings in quality control routines. Built for everyday use in demanding environments Constructed from special steel in a workshop‑grade design, the pin withstands frequent handling while maintaining dimensional stability. The 50 mm shank gives comfortable engagement depth for manual fixtures and bench checks, while the solid construction resists wear under regular use. Supplied in a protective transport case, the item arrives ready for safe storage and reduces the risk of transit damage. This durability translates into a lower total cost of ownership because fewer replacements are required over the tool’s service life. Integrates into inspection workflows and documentation As a single‑element reference for end‑dimension inspection, this pin suits both manual verification and incorporation into gauging fixtures. The clear nominal 10.12 mm marking and robust geometry simplify fixture design and repeatable seating, while the compact form factor supports rapid swaps between stations. Traceability is supported by the SKU and GTIN, which assist inventory control and documentation in inspection protocols. Using a standardised pin streamlines audits and helps maintain consistent quality levels across shifts and sites. Contact Metav Werkzeuge today to discuss how the M323.A12 gauge pin fits into existing inspection processes and to request the item for comparison with current standards. Technical Data Article number: M323.A12 GTIN: 4061905064586 Label: Prüfstift, einzeln, 10,12 mm Länge 50 mm Category: Messstifte Facts Diameter: 10.12 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Supplied in a transport case Single pin for end‑dimension checks FAQ What level of accuracy can be expected from this inspection pin? The M323.A12 gauge pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for end‑dimension checks. Is the pin suitable for daily workshop use? Yes, the workshop‑grade special steel construction and supplied transport case make the pin appropriate for regular handling and storage in workshop environments. Can the pin be integrated into gauging fixtures? The compact geometry and clear nominal 10.12 mm dimension allow straightforward integration of the pin into dedicated fixtures and inspection jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.31 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Benefit from the combination of ±0.002 mm repeatability, special steel construction and a compact 50 mm length for dependable end‑measurement tasks; order the gauge pin directly via Metav Werkzeuge or consult our experts if clarification is needed. Gauge pin M323.A31 — single 10.31 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.A31 is a single‑piece, workshop‑grade measuring pin designed for precise end‑measurements and locating tasks in small to medium assemblies. Workshop-grade design for daily use Diameter 10.31 mm for precise fitting 50 mm length for deeper locating tasks Accuracy ±0.002 mm for repeatable fits Reduce setup time with measurable precision This single gauge pin delivers industrial precision through a tight ±0.002 mm tolerance, which translates into consistent fits and fewer rejected parts during inspection or assembly. The compact element is machined to a 10.31 mm nominal diameter and a 50 mm shank length, meaning it is suitable for locating, checking bores and end‑measurements where small deviation matters. The accuracy level positions the part within fine workshop and inspection applications, reducing the need for repeated adjustments and shortening overall cycle times. Built for workshop handling and reliable endurance Manufactured from special steel, the pin combines toughness with dimensional stability; the material choice helps resist deformation under normal handling and repeated seating. The item is delivered as a workshop version, optimised for everyday use rather than purely laboratory conditions. At approximately 0.1 kg, the component is easy to handle and install in fixtures or test jigs. For safe transport, the pin arrives in a protective plastic or wooden case suitable for workshop logistics, ensuring the measuring surface remains intact until use. Integrates into inspection workflows with minimal training This measuring element fits naturally into existing gauge and fixture setups: its standard nominal diameter and straight shank allow immediate use with common locating systems. Traceability and inventory control are straightforward thanks to the clear article designation M323.A31 and the included GTIN, supporting orderly stock management and faster part identification on the shop floor. The compact dimensions and workshop orientation make the pin a practical choice for quality control stations that require reliable, repeatable contacts without extensive recalibration routines. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.A31 can streamline inspection tasks and to arrange delivery or technical clarification Technical Data Article number: M323.A31 GTIN: 4061905064678 Manufacturer: Metav IndustryLine Facts Diameter: 10.31 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version for robust daily use Material: special steel Delivered in a protective plastic or wooden case for transport FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.A31 is specified with an accuracy of ±0.002 mm, providing repeatable fits for precise locating and end‑measurement tasks. Is the pin suitable for fixture locating and bore checks? Yes, the 10.31 mm diameter and 50 mm length make this pin suitable for locating in fixtures and for bore checking where compact, accurate contacts are required. What material is used and how does that affect durability? The pin is made from special steel, which offers a balance of hardness and toughness for workshop durability and dimensional stability under routine use. Does the product include packaging for transport? The gauge pin is supplied in a protective plastic or wooden case intended for safe transport to the workshop or site. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.36 mm Diameter Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of high reproducibility, compact dimensions and workshop‑ready protection for dependable inline checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Pin, single, 10.36 mm – 50 mm length (Metav IndustryLine) A gauge pin, single, 10.36 mm designed for precision end‑measure checks and alignment tasks in workshop metrology High accuracy ±0.002 mm Special steel, wear resistant Workshop version, robust finish Supplied in protective transport case Consistent accuracy for fit and go/no‑go checks The gauge pin is manufactured to an inspection tolerance of ±0.002 mm, making it suitable for fine acceptance tests and dimensional verification where repeatability is essential. With a nominal diameter of 10.36 mm and an overall length of 50 mm, the pin supports tight fit checks and assembly trials in jigs and fixtures. The stated tolerance refers to measured variation from the nominal diameter and helps engineers quantify clearances and interference fits during first‑article inspection or serial sampling. Built for workshop use and handling The workshop‑oriented construction provides a robust surface finish and handling comfort during repetitive use. Manufactured from special steel, the pin offers enhanced wear resistance for longer service life in production environments. At approximately 0.1 kg, the component is easy to position by hand or in a fixture without compromising stability. Delivery includes a protective transport case, which reduces the risk of damage in transit and keeps inspection tools organised between shifts. Practical integration into quality routines Designed for use as a reference element in dimensional control, this checking pin supports alignment, seating and end‑measure evaluations in small assemblies and tooling setups. The compact geometry and stable tolerance make it a practical choice for bench verification, gauge blocks pairing or feature‑control tasks. For traceability, the product is listed under GTIN 4061905065392, facilitating inventory management and documentation within inspection protocols. For tailored recommendations regarding integration into existing measurement procedures, Metav Werkzeuge can advise on compatible fixtures and complementary gauges. For workshop‑grade precision from Metav IndustryLine, order the M323.A36 gauge pin through Metav Werkzeuge or request application support via info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M323.A36 GTIN: 4061905065392 Weight: 0.1 kg Material: Special steel Core specifications Nominal diameter: 10.36 mm Length: 50 mm Accuracy/tolerance: ±0.002 mm Special features Workshop execution Supplied in transport case FAQ What tolerance does this gauge pin offer? The M323.A36 gauge pin by Metav IndustryLine is manufactured with a tolerance of ±0.002 mm to support high‑precision fit and inspection tasks. Which material is used for the pin? The pin is made from special steel, giving the Metav IndustryLine checking pin good wear resistance and durability for repeated workshop use. Is the pin supplied ready for use and protected during transport? Yes, the single gauge pin is supplied in a protective transport case suitable for workshop handling and safe storage during transit. What typical applications suit this checking pin? Typical uses include end‑measure checks, fixture alignment, seating verification and go/no‑go fit trials in small assemblies and jigs. How is the product identified for inventory and documentation? Identification is supported by the GTIN 4061905065392 and the article number M323.A36 for procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.37 mm Diameter Workshop Finish Plastic Case - Metav IndustryLine
Take advantage of the combination of industrial accuracy, robust workshop execution and transport protection for dependable end-measurements; order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration into inspection workflows. Gauge pin, single — 10.37 mm Ø, 50 mm length | Metav IndustryLine A Gauge pin, single — 10.37 mm Ø, 50 mm length designed for precise end‑measurements and routine inspection tasks in workshop environments. High-precision tolerance ±0.002 mm Robust workshop execution for daily use Manufactured from special steel Supplied in a protective transport case Reliable end-measurements with industrial accuracy The Gauge pin M323.A37 provides a clear metrological advantage where repeatability matters. With a stated tolerance of ±0.002 mm, this test pin enables consistent end‑dimension checks that reduce uncertainty during final inspection and minimize rework. The combination of a defined diameter (10.37 mm) and a standard 50 mm length makes this component suitable for comparative measurements, go/no‑go verification and reference stacks on inspection benches. The tight tolerance directly supports faster decision cycles in quality control and contributes to more efficient production throughput. Built for workshop durability and secure handling Manufactured from special steel, the pin is produced to withstand regular handling without compromising dimensional stability. The item is delivered as a workshop version, meaning the design balances robustness with manageable weight (approx. 0.1 kg) so it is convenient to use on the shop floor. For transport and storage the pin is supplied in a protective transport case, reducing the risk of damage during handling and keeping inspection tooling organised. These practical features help maintain measurement integrity across shifts and operators. Practical compatibility for inspection and gauging tasks As a precision gauge element, this test pin integrates easily into existing inspection routines and fixture setups. The simple cylindrical geometry suits use as a reference dowel, locating pin or end‑measurement master in comparative layouts. Clear, repeatable contact geometry reduces operator variation and speeds up routine checks — a rational improvement that preserves product quality while saving time. The modest footprint and universal form factor make the item a pragmatic addition to any metrology kit or small batch inspection process. Reassurance through proven supply and expertise Metav’s approach to precision tools focuses on availability and trust: a broad product range and central distribution from Emmerich act as a quality filter for the European market. Choosing Metav IndustryLine components supports reliable supply chains and consistent product specifications; this credibility is reinforced by long‑standing customer relationships and an extensive catalogue of inspection equipment. For workshops and small series production the combination of clearly specified tolerances and dependable sourcing represents a sound investment in measurement certainty. Contact Metav Werkzeuge today for availability and technical advice to integrate this high‑precision gauge pin into inspection routines and secure consistent end‑measurements in production. Technical Data Article number: M323.A37 GTIN: 4061905065408 SKU: M323.A37 Category: Gauge pins / Messstifte Facts Diameter: 10.37 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Supplied in a protective transport case Intended use: end measurements / inspection FAQ What is the declared accuracy of this gauge pin? The declared accuracy for the gauge pin is ±0.002 mm, permitting highly repeatable end‑measurements for routine inspection. Is the pin suitable for daily workshop use? Yes, the workshop execution and special steel construction make the test pin fit for regular handling and inspection tasks on the shop floor. How is the item delivered and protected during transport? The gauge pin is supplied in a protective transport case to prevent damage and to simplify storage and handling. Can the pin be used as a locating dowel in fixtures? The cylindrical geometry and tight tolerance render the pin suitable as a locating dowel or reference master in many fixture and gauging applications. What is the product identifier for ordering? Order using SKU M323.A37 or refer to GTIN 4061905065408 when specifying this Metav IndustryLine gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.38 mm Diameter Workshop Version, Special Steel Case Included - Metav IndustryLine
Take advantage of precise dimensional control with a tight ±0.002 mm tolerance, a robust special steel construction and a compact 50 mm length for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin Ø10.38 mm, length 50 mm — Metav IndustryLine The Gauge pin Ø10.38 mm, length 50 mm is a workshop-grade inspection pin designed for fast, repeatable end‑dimension verification in production and quality control settings. Workshop version, robust construction Diameter Ø10.38 mm, length 50 mm Tolerance ±0.002 mm for precision Precision where repeatability counts A purpose-made gauge pin serves as a simple, dependable reference for checking bores, plug fits and end dimensions. With a nominal diameter of Ø10.38 mm and a declared dimensional accuracy of ±0.002 mm, this pin supports tight tolerances commonly required in precision engineering. The small form factor and controlled geometry reduce positional error during manual checks, so measured deviations directly reflect the component rather than the measuring aid. For production control this means fewer false rejects and more reliable pass/fail decisions. Built for workshop use and wear resistance Constructed from special steel, this inspection pin combines surface hardness with adequate toughness for repeated handling on the shop floor. At a 50 mm overall length and approximately 0.1 kg mass, the pin is easy to position and resists bending under normal use, which maintains dimensional integrity over time. The workshop specification signals a balance between durability and cost-efficiency: the component is ready for everyday inspection cycles without requiring special handling or complex fixtures. Practical integration into measurement routines Delivered as a single, clearly identified unit (SKU M323.A38), the pin is intended for quick checks in assembly, jig set‑up and incoming inspection of turned or drilled parts. Its compact geometry makes it suitable for tight access conditions and for use as a reference in comparative measurement setups. For users less familiar with gauge pins: these items act like precision dowels that confirm whether a bore or mating part meets a predetermined size; they do not replace dimensional gauges with digital readouts but provide a robust, low‑tech verification step that is fast and repeatable. For workshop metrology that demands consistent sub‑0.01 mm control, request the Metav IndustryLine M323.A38 gauge pin from Metav Werkzeuge to discuss application suitability and order details. Technical data Article number: M323.A38 GTIN: 4061905065415 Brand: Metav IndustryLine Product: Gauge pin Ø10.38 mm, length 50 mm Numbers / Core technical data Diameter: 10.38 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Delivery: Single piece FAQ What tolerance does this gauge pin provide? The gauge pin Ø10.38 mm (M323.A38) is specified with a dimensional tolerance of ±0.002 mm, suitable for precision end‑dimension checks. Which material is used for the pin? The M323.A38 gauge pin is manufactured from special steel, chosen for durability and wear resistance in workshop environments. What are the dimensions and weight of the pin? Nominal diameter 10.38 mm, length 50 mm, approximate weight 0.1 kg for the gauge pin M323.A38. Is the pin supplied individually or in a set? The item is supplied as a single inspection pin, described in the product label as an individual gauge pin. What is the primary application for this component? Common uses include end‑dimension verification, plug and bore checking and quick reference checks during assembly and incoming inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.4 mm Diameter Workshop Version, Special Steel Case Included - Metav IndustryLine
Take advantage of a workshop-grade design with a 10.4 mm diameter, 50 mm length and a tight ±0.002 mm tolerance for consistent end‑measure checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A40 — 10.4 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.A40 is a workshop‑grade cylindrical gauge intended for end‑measure verification and fit testing in routine inspection and assembly tasks. Workshop version construction Diameter 10.4 mm, length 50 mm High accuracy ±0.002 mm Delivered in protective transport case Reliable measurements that speed inspection cycles The cylindrical gauge provides a compact verification tool for repetitive end‑measure checks, reducing setup time during batch inspections. Owing to its ±0.002 mm tolerance, the pin supports high‑precision decisions in production control and quality assurance. Where comparative gauges or go/no‑go fittings are used, this component helps standardise checks so rejection rates fall and throughput improves. The solid construction minimises deformation under handling and contributes to consistent measurement results across shifts. Robust design for daily workshop use Built as a workshop version and manufactured from special steel, the pin withstands frequent handling and the occasional accidental contact typical of shop‑floor environments. The 50 mm overall length balances reach and rigidity, ensuring straight insertion and stable seating in bores and fittings. Supplied in a protective transport case, the unit is ready for storage or transit between inspection stations without additional packaging, reducing downtime and protecting the measurement surface from contamination. Easy integration into inspection routines and gauges The pin is suitable for quick fit testing, end‑measure verification and reference stacking in fixture checks. Its precise diameter of 10.4 mm makes it a reliable reference for assembly jigs, gauge blocks and fixture set‑ups where small clearance verification matters. The compact format requires minimal handling space and can be combined with common bench fixtures to create a repeatable inspection step that is both fast and auditable, supporting continuous production requirements. For a reliable supply of Metav IndustryLine gauge pins and to discuss fitment in existing inspection processes, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 — our team will advise on stock and delivery options. Technical data Article number: M323.A40 SKU: M323.A40 GTIN: 4061905065439 Material: Special steel Numbers / Core technical data Diameter: 10.4 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.1 kg Measuring range (max): 10.4 mm Design / Special features Workshop version execution Supplied in protective transport case ECLASS: 21170231 Label: Gauge pin, single, 10.4 mm, length 50 mm FAQ What tolerance does the gauge pin offer? The gauge pin M323.A40 is manufactured to an accuracy of ±0.002 mm, making it suitable for fine end‑measure verification and go/no‑go reference tasks. Is the pin delivered ready for transport and storage? Yes, the unit is supplied in a protective transport case to safeguard the measurement surface during storage and movement between workstations. Which material is used for the pin? The pin is made from special steel, chosen for its combination of wear resistance and dimensional stability in workshop environments. Can this pin be used in fixture set‑ups and assembly jigs? The 10.4 mm diameter and 50 mm length of the M323.A40 make it well suited for fixture alignment, end‑measure checks and quick fit testing within assembly and inspection processes. What product designation should be referenced when ordering? Please refer to the gauge pin M323.A40 (SKU M323.A40, GTIN 4061905065439) when enquiring or placing orders for this workshop‑grade gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.52 mm Diameter Workshop Version, Hardened Special Steel in Case - Metav IndustryLine
Take advantage of a compact, workshop-grade gauge pin that combines tight tolerance ±0.002 mm, a 10.52 mm diameter and a manageable 50 mm length for accurate end‑measurement tasks; delivered ready for safe transport in a protective case. Order the gauge pin directly via Metav Werkzeuge or consult the technical team for specification matching. Gauge pin, single — 10.52 mm diameter, 50 mm length (Workshop version) — Metav IndustryLine Gauge pin, single, 10.52 mm diameter and 50 mm length for precise bore and end‑dimension checks in machining and inspection workplaces. 10.52 mm diameter, 50 mm length Workshop‑grade special steel construction Tolerance ±0.002 mm for fine control Delivered in transport case Precise size control where repeatability matters A compact, single gauge pin with a diameter of 10.52 mm provides a straightforward reference for go/no‑go checks and end‑dimension verification. The stated tolerance of ±0.002 mm (±2 μm) places this item in the category of fine workshop gauges, enabling consistent dimensional checks during set‑up and quality assurance routines. For everyday metrology in production, this level of precision reduces rework and supports reliable assembly fits, turning a simple pin into a dependable measurement standard. Robust workshop design for reliable handling Built as a workshop version from special steel, the pin resists the mechanical wear typical of shop environments while remaining simple to handle. The 50 mm length balances reach and stiffness, helping to avoid bending during use and ensuring more reproducible contact with bore edges or end faces. The compact form factor supports quick insertion and removal, making it suitable for frequent checks on jigs, fixtures and finished components without disrupting workflow. Practical transport and identification for the workshop To protect tool life and maintain accuracy between uses, the gauge pin is delivered in a protective case suitable for transport. This arrangement reduces the risk of scratches or dents that can alter the effective diameter and compromise measurements. Clear marking and supplied identification make it easy to track the pin within tooling sets, simplifying inventory control and helping maintain measurement integrity across shifts. Straightforward applications and measurable benefits Designed for end‑measurement tasks, the pin is primarily intended for verifying bore sizes, seating fits and end faces in machining and inspection operations. Its single‑piece construction offers a direct mechanical reference without electronics, which is advantageous where immediate, low‑complexity checks are required. The combination of repeatable dimensional accuracy and a workshop‑hardened finish translates into fewer inspection deviations and a more predictable production output. Contact Metav Werkzeuge in Emmerich to confirm suitability for specific applications and to request delivery or availability details for this Metav IndustryLine gauge pin (M323.A52) Technical data Article number: M323.A52 GTIN: 4061905063473 Manufacturer: Metav IndustryLine Measurements Diameter: 10.52 mm Length: 50 mm Weight: 0.1 kg Tolerance / accuracy: ±0.002 mm Features Single gauge pin design Material: Special steel Workshop version Delivered in a plastic or wooden case for transport Intended use: end measurements FAQ What level of accuracy can be expected from this gauge pin? The gauge pin offers an accuracy of ±0.002 mm, making it suitable for fine workshop checks where deviations must be kept within a few micrometres. Is the gauge pin suitable for checking internal bores? Yes, the single‑piece, 10.52 mm diameter pin is intended for verifying internal bores, seating fits and end faces in machining and inspection tasks. What material is the pin made from and how does that affect durability? The pin is manufactured from special steel, chosen for robust wear resistance in workshop conditions while maintaining dimensional stability. Is the pin supplied ready for safe transport and storage? The item is supplied in a protective plastic or wooden case for transport, which minimises the risk of damage that could affect measurement accuracy. Does the product include an article or SKU for ordering reference? The ordering reference for this Metav IndustryLine gauge pin is M323.A52, and the GTIN is 4061905063473. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.59 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precision and workshop-grade durability: the 10.59 mm gauge pin with a tight ±0.002 mm tolerance and a stable 50 mm shank ensures reproducible end-dimension checks and secure fixture engagement. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for specification matching. Gauge pin, single — 10.59 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single 10.59 mm / 50 mm length is designed for quick end-dimension verification and fixture alignment in workshop metrology and inspection tasks Workshop version for durable use Diameter 10.59 mm with ±0.002 mm tolerance 50 mm shank length for stable engagement Made from special steel for wear resistance Reliable reference for end-dimension verification A precision gauge pin is the simplest route to repeatable end-size checks. With a nominal diameter of 10.59 mm and a verified tolerance of ±0.002 mm, this test pin functions as a fixed, traceable reference for bore checks, pin fits and alignment operations. The tight tolerance reduces measurement uncertainty compared with loose-fitting checks, supporting consistent pass/fail decisions on the shop floor and lowering the risk of scrapping otherwise acceptable parts. Robust design that keeps inspections predictable Built as a workshop version, the pin combines a compact geometry with a 50 mm shank that gives reliable engagement in gauges, fixtures or manual checks. Constructed from special steel, the component is abrasion-resistant and maintains form under repeated use, which extends service life and reduces the frequency of replacements. The modest mass supports easy handling while ensuring the pin seats positively in the mating feature, improving reproducibility for routine inspection tasks. Integrating the pin into everyday quality workflows As a single test pin, the component lends itself to rapid Go/No‑Go procedures, reference stacks and setup control. Using the pin as part of a standardised inspection routine shortens cycle times and improves throughput, a rational advantage for production and maintenance teams aiming to keep lines moving. The product’s category as a precision test pin (Messstifte) and the clear article identifiers simplify stock management and traceability in quality documentation. For workshop-grade tolerance and dependable wear resistance choose the Metav IndustryLine gauge pin; contact Metav Werkzeuge in Emmerich for supply and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.A59 GTIN: 4061905064302 Category: Messstifte Facts Diameter: 10.59 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Single gauge pin Story trigger: end-dimension checks FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.A59 (Metav IndustryLine) is manufactured to a tolerance of ±0.002 mm, providing a high-precision reference for end-dimension checks. Is the pin suitable for repeated use in a production environment? Yes, the workshop‑grade construction and special steel composition ensure good wear resistance for repeated use in inspection and fixture applications. Can the gauge pin be used for bore checks and pin fits? The 10.59 mm diameter and 50 mm shank length make this test pin suitable for bore verification, fit checks and alignment tasks as a stable reference. How is the product identified for stock and traceability? The item is supplied as M323.A59 with GTIN 4061905064302 and is listed under the Messstifte category for easy inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 13.48 mm Length Workshop Finish - Metav IndustryLine
Take advantage of a precise and compact measuring reference that delivers a consistent 13.48 mm diameter with a fine ±0.002 mm tolerance and a stable 50 mm length — ideal for repeatable end‑measure checks and quick go/no‑go verification. Order the pin directly via Metav Werkzeuge or contact our consultants for application guidance. Gauge pin M323.D48 — precision test pin, 13.48 mm Ø, 50 mm length (Metav IndustryLine) A Gauge pin M323.D48 serves as a hardened reference diameter for inspection and assembly tasks, supplying a fixed 13.48 mm datum for bore checks, end‑measure verification and fixture set‑up in workshop and production environments. Precision Ø 13.48 mm Tolerance ±0.002 mm 50 mm length, stable handling Made from special steel Consistent dimensional reference for reliable inspection The compact design provides a stable reference that helps to speed up routine checks and reduces measurement uncertainty. With a declared tolerance of ±0.002 mm, the pin functions as a high‑precision reference for comparative and go/no‑go tests, ensuring that bores and seats are validated against a fixed diameter rather than a subjective feel. This consistent datum reduces rework, supports traceable quality routines and integrates smoothly into existing inspection sequences. Durable workshop construction for repeat use Built as a workshop‑grade component, the pin is manufactured from special steel and finished for sustained contact performance over repeated use. The 50 mm length gives sufficient engagement for many bores while maintaining ease of handling and low mass for rapid manual checks. The robust construction reduces the risk of wear‑induced drift and makes the item suitable for daily inspection tasks in production and maintenance environments. Practical integration into quality control workflows As a fixed‑size gauge, the item simplifies set‑up of jigs and fixtures and serves as a quick verification tool during assembly and final inspection. The clear physical reference of 13.48 mm accelerates decision‑making in the workshop: accept, reject or rework. Supplied with the clear product identifier M323.D48, the pin is straightforward to document in inspection logs and to include in traceability records for component runs and batch verification. For a reliable inspection reference, order the M323.D48 from Metav Werkzeuge or consult our specialists at Metav Werkzeuge for advice on integrating the gauge pin into existing measurement routines Technical data SKU: M323.D48 GTIN: 4061905066047 Category: Gauge pins Core dimensions & accuracy Diameter: 13.48 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Materials & special features Material: Special steel Design: Workshop version Typical application: End‑measure checks and bore verification FAQ What is the exact diameter of the gauge pin? The M323.D48 gauge pin has a diameter of 13.48 mm as its fixed reference. What accuracy can be expected from this pin? The pin is specified with a tolerance of ±0.002 mm, suitable for precise workshop inspection tasks. Which materials is the pin intended for checking? The M323.D48 is a dimensional reference used for verifying component bores and end measurements rather than being material‑specific; it is used across metal and mixed‑material assemblies for dimensional checks. Is the gauge pin suitable for fixture set‑up and jig alignment? Yes, the fixed diameter and stable 50 mm length make the pin appropriate for fixture set‑up, alignment and quick go/no‑go verifications in production. How is the product identified for documentation and traceability? The item is supplied as SKU M323.D48 with GTIN 4061905066047, allowing straightforward documentation in inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 14.49 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precision and robust workshop construction for repeatable end‑measure checks: a compact gauge pin with a controlled diameter and an industrial tolerance of ±0.002 mm ensures dependable seating and consistent inspection results. Order the required items directly via Metav Werkzeuge or consult the product experts if additional specifications are needed. Gauge pin, single 14.49 mm (50 mm length) — workshop‑grade, ±0.002 mm (Metav IndustryLine) Gauge pin, single 14.49 mm (50 mm length) is a compact, workshop version gauge pin designed for end‑of‑range measurements and precise seating checks in production and inspection environments. Workshop‑grade special steel Diameter 14.49 mm, tolerance ±0.002 mm 50 mm solid length for stable seating Single gauge pin for end‑measure verification Reduce measurement uncertainty with tight tolerances The compact design delivers a controlled diameter of 14.49 mm combined with a verified tolerance of ±0.002 mm, translating into measurable reductions in process variation and rework. This degree of precision is especially valuable where repeatable seating or plug checks determine pass/fail decisions. Using a single, solid pin with a 50 mm engagement length improves positional stability compared with short shank gauges, so inspection results remain consistent even under workshop conditions. Built for workshop handling and repeated use Constructed from special steel in a workshop‑grade finish, the pin resists deformation and maintains dimensional integrity across frequent handling. The robust material and solid construction ensure reliable contact with mating bores and fixtures, extending the pin’s service life and reducing the frequency of replacements. Where process uptime matters, a durable gauge pin translates into fewer interruptions and steady inspection throughput. Integrates simply into quality routines and fixtures The single gauge pin is straightforward to incorporate into standard inspection jigs, bench fixtures and end‑of‑line checks. Its standardised diameter and length facilitate fixture design and reduce the need for bespoke adapters. For batch verification or intermittent spot checks, the pin provides a fast, repeatable reference that complements calipers, micrometres and plug gages in a coherent measurement chain. Clear specifications support traceability and documentation Dimensionally defined components with documented tolerances support traceable quality records and simpler acceptance criteria. The compact format and unambiguous specification help to standardise inspection procedures across workshops, making results easier to compare over time. Where traceability and reproducibility are priorities, the controlled geometry and declared tolerance provide a firm technical basis for decision‑making. For supply and technical advice on Metav IndustryLine workshop gauge pins, contact Metav Werkzeuge in Emmerich to secure the correct items for inspection routines and fixture integration Technical Data Article number: M323.E49 GTIN: 4061905067693 SKU: M323.E49 Facts Diameter: 14.49 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Version: workshop execution Category: gauge pins FAQ What is the intended use of this gauge pin? The gauge pin is intended for end‑of‑range measurements and seating checks in production and inspection setups; the Metav IndustryLine gauge pin M323.E49 provides a stable reference for plug and bore verification. How precise is the gauge pin and what does the tolerance mean? The declared ±0.002 mm tolerance indicates the maximum permissible deviation from the nominal 14.49 mm diameter, ensuring tight dimensional control for repeatable inspection results. Can this pin be used in fixtures and jigs? Yes — the solid 50 mm length and workshop‑grade steel construction make the pin suitable for integration into bench fixtures and standard inspection jigs. Is the material suitable for regular workshop environments? The pin is made from special steel in a workshop execution, providing robustness against routine handling and reliable dimensional stability during typical inspection cycles. How is the component identified for procurement and traceability? Use GTIN 4061905067693 or SKU M323.E49 for ordering and traceability within quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 18.78 mm Diameter, Workshop Version, Special Steel in Case - Metav IndustryLine
Take advantage of repeatable end‑measurement with a nominal diameter of 18.78 mm, a usable length of 50 mm and a tight ±0.002 mm tolerance for consistent inspection results; the workshop‑specification construction and delivery in a transport case ensure fast handling and secure storage. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.I78 — 18.78 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I78 is a single precision test pin designed for end‑measurement and fit inspections in workshop and production metrology, particularly for quick go/no‑go checks and dimensional verification of machined components Workshop specification 18.78 mm nominal diameter Tolerance ±0.002 mm Delivered in transport case Precision for repeatable end measurements The pin provides a measurable improvement in process reliability because the nominal 18.78 mm diameter and the specified ±0.002 mm tolerance translate directly into tighter acceptance criteria during incoming inspection or in‑process checks. Manufactured from special steel, the geometry and surface finish reduce seating errors and measurement scatter; this results in fewer false rejects and a clearer statistical basis for quality decisions. For end‑measurement tasks and fit checks, the combination of 50 mm usable length and compact mass supports steady hand positioning while remaining compatible with common jigs and fixture designs. The clearly defined tolerance allows engineers to integrate the pin into control plans and SPC routines with confidence in repeatability. Built for workshop handling and longevity The workshop execution emphasises practical durability: the selected special steel balances hardness and resistance to surface damage, while a careful finish preserves the effective diameter over repeated use. Supplied in a protective transport case, the test pin is ready for secure storage and damage‑free transport between inspection benches or job sites. Robust construction minimises maintenance intervals and reduces the need for frequent replacement, supporting lean inventory practices and uninterrupted production cycles. The modest mass and compact form provide ease of handling during high‑throughput checks, helping to maintain steady cycle times without compromising accuracy. Integrating the pin into inspection workflows As a compact dimensional standard, the pin suits simple plug‑gauge routines, bench checks and reference stack assemblies. It functions well for verifying bores, locating features and checking mating fits in assemblies; the repeatability of the geometry simplifies acceptance criteria in work instructions. When included as a reference artefact in a fixture, the pin supports reproducible positioning and faster changeover, translating precision into operational efficiency. For users seeking traceable calibration or specific reporting, Metav IndustryLine can advise on calibration pathways and documentation to match internal quality systems and audit requirements. Choose the Metav IndustryLine M323.I78 for workshop end‑measurement reliability and contact Metav Werkzeuge for specification advice and prompt supply from Emmerich. Technical data SKU: M323.I78 GTIN: 4061905449468 Designation: Gauge pin, single, 18.78 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Core dimensions Nominal diameter: 18.78 mm Usable length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Materials & features Material: special steel Workshop specification Delivered in transport case Application: end‑measurement, fit checks, dimensional verification FAQ What is the primary use of this gauge pin? The gauge pin is intended for end‑measurement and fit inspections, serving as a reference for bore checks, locating features and quick go/no‑go verifications in workshop and production environments. What tolerance and repeatability can be expected? The pin is manufactured to a ±0.002 mm tolerance, providing the level of repeatability required for precise dimensional checks and stable statistical process control. Which materials and components can be checked with this pin? Designed for dimensional verification of machined parts, the pin is suitable for use with metal and precision‑machined components where accurate bore or fit assessment is required. How is the pin delivered and stored? The product is supplied in a protective transport case to prevent handling damage and to allow secure storage between inspection tasks. Can the pin be integrated into a fixture or jig? Yes, the pin’s geometry and compact length make it suitable for integration into fixtures and jigs for repeatable locating and verification tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 18.81 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
The combination of workshop-ready robustness, ±0.002 mm dimensional accuracy and a compact 50 mm length makes this gauge pin a reliable tool for repeatable end-dimension checks and fixture setting; order the test pin directly via Metav Werkzeuge or ask our consultants if needed M323.I81 test pin — 18.81 mm diameter, 50 mm length (Metav IndustryLine) The M323.I81 is a single test pin designed for precise end-dimension verification and gauging tasks in workshop environments Workshop version for robust daily use Diameter 18.81 mm with ±0.002 mm tolerance Length 50 mm for compact fixture fitting Delivered in a protective transport case Precision that reduces rework and inspection time High repeatability is the primary operational benefit of this gauge pin. With a specified runout tolerance of ±0.002 mm, the pin gives a clear, measurable reference for end-dimension checks and go/no-go fixturing; this level of accuracy supports reliable pass/fail decisions and reduces the need for secondary measurements. The nominal diameter 18.81 mm is machined to tight form and size control, which helps maintain consistent alignment in jigs and assemblies. For production environments where throughput and conformity are measured, the technical accuracy directly translates into fewer rejected components and lower overall inspection time. Workshop design for everyday handling and durability Engineered as a workshop version, the pin combines a short 50 mm overall length with a solid profile that resists bending during routine handling. The body is made from special steel, selected for wear resistance and dimensional stability under repeated insertion and withdrawal cycles. At approximately 0.15 kg, the component is easy to position by hand yet substantial enough to remain steady in fixtures. Delivery in a protective transport case preserves the ground surfaces during storage and transit, ensuring the reference diameter stays within tolerance until first use. The compact format supports quick integration into bench-top gauges, fixture checks and assembly stations. Procurement confidence and application support As part of the Metav IndustryLine range, this gauge pin benefits from a European distribution and quality control approach that emphasises availability and traceability. Stock is managed from Emmerich with a quality filter for incoming goods, which supports predictable replenishment for production lines. The clear specification and workshop-orientated design simplify specification in engineering documents and bills of materials; traceability is supported by SKU and GTIN identifiers listed in the technical data. Where bespoke advice on application or integration is required, Metav’s consultative services provide pragmatic support to match the pin to inspection routines and fixture geometry. Choose Metav IndustryLine quality for reliable gauging — contact Metav Werkzeuge for stock availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.I81 GTIN: 4061905449888 Manufacturer: Metav IndustryLine Facts Diameter: 18.81 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop execution Delivered in protective transport case FAQ What level of accuracy does the M323.I81 test pin provide? The M323.I81 test pin from Metav IndustryLine is specified to ±0.002 mm, suitable for high-repeatability end-dimension checks and fixture setting. How is the pin delivered to protect its measuring surfaces? Delivery is in a protective transport case to preserve the ground diameter and surface finish during storage and transit. For which applications is this gauge pin intended? This gauge pin is intended for end-dimension verification, go/no-go gauging and fixture alignment in workshop and production environments. Is the M323.I81 suitable for integration in inspection jigs? Yes; the compact 50 mm length and stiff profile are designed for easy integration into bench fixtures and gauging jigs. Where can traceability information such as SKU and GTIN be found? Traceability identifiers including SKU and GTIN are supplied in the technical data section for the M323.I81 test pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Test Pin 10.17 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise tolerances, compact dimensions and a workshop-ready design to ensure repeatable small-bore checks with minimal setup. The combination of high repeatability and robust construction supports reliable inspection routines—order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A17 — 10.17 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.A17 is a single precision plug intended for end-measurements and plug gauges in workshop inspection, suited to fine mechanical and small-part applications. Precision tolerance ±0.002 mm Diameter 10.17 mm for fine fits 50 mm overall length for stable handling Workshop-grade special steel construction Precise dimensions that reduce rework and inspection time This gauge pin delivers a defined fit with a diameter of 10.17 mm and a verified tolerance of ±0.002 mm, providing a measurable standard for go/no-go checks and clearance verification. The tight tolerance reduces ambiguity during quality control and speeds up decision-making in repetitive inspection tasks. As a compact inspection element it supports faster fixture set-up and lowers the risk of dimensional scrap when used as a reference for small bores and plugs. Built for regular shop-floor use with durable material choice Manufactured from special steel in a workshop configuration, the pin balances stiffness and wear resistance for frequent handling and insertion cycles. The 50 mm length gives sufficient contact surface to stabilise the plug in the bore while remaining compact for cramped fixtures. This construction helps maintain reproducible contact geometry over many cycles, enhancing the lifespan of the inspection tool and reducing the need for frequent replacements. Micro-range suitability and practical application guidance Classified in the micro range (measurement span 10–100 mm), the pin is ideal for micromechanics, instrument making and any application requiring precise small-bore checks. The product is supplied and documented for traceable identification, supporting structured inspection plans and part release procedures. For customers seeking consistent small-part measurement, the specification of this gauge pin provides a clear basis to integrate the component into existing go/no-go and plug-gauge workflows with minimal adaptation. For dependable small-bore inspection, request the Metav IndustryLine gauge pin M323.A17 via Metav Werkzeuge or consult our specialists at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.A17 GTIN: 4061905062315 Label: Gauge pin, single, 10.17 mm length 50 mm Brand: Metav IndustryLine Facts Diameter: 10.17 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Measurement range (max): 10.17 mm Special features Material: Special steel Workshop execution Measurement class: Micro (10–100 mm) Accuracy specification: ±0.002 mm FAQ What applications suit this gauge pin? The gauge pin M323.A17 is suitable for small-bore inspections, plug-fit checks and fine mechanical assemblies where a 10.17 mm reference is required. Is the diameter specification guaranteed for production use? Yes, the diameter 10.17 mm and the stated tolerance of ±0.002 mm define the production-grade specification for the Metav IndustryLine gauge pin M323.A17. Can this pin be used in fixture checks and go/no-go assemblies? The pin’s compact 50 mm length and tight tolerance make it appropriate for fixture-based inspections and go/no-go verification in workshop and light production environments. How is traceability handled for the product? Identification data such as article number M323.A17 and GTIN 4061905062315 allow integration into inspection documentation and traceability records for quality processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Test Pin 10.39 mm Diameter Workshop Version, Special Steel Case - Metav IndustryLine
Take advantage of a workshop-ready inspection pin that combines 10.39 mm nominal diameter, ±0.002 mm tolerance and a compact 50 mm length for consistent end-measure reference. Order this precision gauge pin directly via Metav Werkzeuge or consult our technical team for application advice. Gauge pin M323.A39 (10.39 mm Ø, 50 mm length) — Metav IndustryLine Gauge pin M323.A39 is a single-piece precision inspection pin intended for dimensional control and end-measure checks in workshop and quality-inspection environments. 10.39 mm diameter, tolerance ±0.002 mm 50 mm length, special steel construction Workshop version for routine inspection tasks Consistent reference measurements for shop-floor control The compact inspection pin offers a clear, measurable reference for end-face and hole checks where repeatability matters. With a 10.39 mm nominal diameter held to ±0.002 mm, the pin provides a reliable datum for pass/fail assessments and comparative gauges. The specified tolerance reflects industrial-grade performance suitable for maintenance, assembly and incoming inspection processes where tight fit and location checks are routine. Durable construction for everyday workshop use Manufactured from special steel, the 50 mm body balances rigidity and feel for quick handling during repetitive checks. The workshop version is designed to tolerate frequent use without compromising the measuring surface; the short length improves stiffness and reduces bending under normal manual application. The compact mass facilitates swift placement and removal, making it a practical choice for production benches and inspection stations. Simple integration into existing inspection routines Supplied as a single test pin, this item is suitable for use as an individual reference gauge or as a replacement element in a set of inspection pins. Traceability is supported by the visible identifiers: SKU M323.A39 and GTIN 4061905065422, which ease stock management and calibration records. The pin’s straightforward geometry makes it compatible with common gauge holders and fixtures used in workshop metrology. Reliable partner for precision requirements As part of the Metav IndustryLine range, the pin benefits from a distribution and quality filter based in Emmerich that focuses on consistent supply and technical availability for industry and trade. This connection supports reliable replenishment and documentation, helping to maintain inspection continuity across production cycles. Specify the Metav IndustryLine gauge pin for robust, repeatable end-measure checks — contact Metav Werkzeuge for delivery details and technical guidance at info@metav-werkzeuge.com or by phone Technical data SKU: M323.A39 GTIN: 4061905065422 Brand: Metav IndustryLine Label: Test pin, single, 10.39 mm diameter, 50 mm length Facts Diameter: 10.39 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Single-piece inspection pin Intended for end-measure reference checks FAQ What is the nominal diameter and tolerance of the pin? The pin has a nominal diameter of 10.39 mm with a declared tolerance of ±0.002 mm for precise reference measurements. Is this item supplied as a single piece or in a set? This is supplied as a single-piece inspection pin (SKU M323.A39) suitable for individual replacement or use as a standalone reference. Which material is used for the gauge pin? The pin is made from special steel, chosen for stability and wear resistance in workshop inspection tasks. Can this pin be used for end-face and hole checking? Yes, the geometry and stiffness of the 50 mm length make it appropriate for end-measure references and comparable hole assessments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Test Pin 12.06 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop construction for reliable end‑measurement tasks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.C06 – 12.06 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.C06 is a single, cylindrical inspection pin designed for precise end‑measurements and checking diameters in workshop environments. Workshop version for industrial use Diameter 12.06 mm with high tolerance Length 50 mm for compact checking Special steel construction for durability Precision that reduces rework and speeds inspection The M323.C06 is manufactured to a tight tolerance of ±0.002 mm, making it suitable for tasks where reproducibility matters. As a hardened inspection pin with a nominal 12.06 mm diameter, it delivers consistent contact geometry for rapid pass/fail assessments and comparative measurements. The compact 50 mm length keeps the pin rigid during probing and limits deflection, which contributes directly to measurement reliability and fewer repeat operations on production parts. Built for the workshop: robust materials and practical handling This workshop‑grade inspection pin is produced from special steel, chosen for dimensional stability under repeated use. The workshop version designation indicates components and finishing targeted at regular shopfloor handling rather than delicate laboratory use. Supplied in a protective transport case, the pin remains protected during storage and transit, preserving the calibration state and surface condition so that the tool stays ready for immediate use on the line. Practical benefits for quality control workflows Using a fixed‑diameter inspection pin simplifies go/no‑go checks, alignment tasks and end‑measurement controls. The straightforward geometry reduces operator interpretation: a controlled contact surface and known tolerance allow integration into bench checks or fixture verifications with minimal setup time. The item is referenced as M323.C06 for easy traceability when documenting inspection steps or ordering replacements, helping maintain an efficient quality routine. For reliable end‑measurement with Metav IndustryLine quality, contact Metav Werkzeuge GmbH in Emmerich for tailored advice and secure supply Technical data Article number: M323.C06 GTIN: 4061905065521 Label: Prüfstift, einzeln, 12,06 mm Länge 50 mm Facts Diameter: 12.06 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Delivery: Protective transport case SKU: M323.C06 FAQ What tolerance does this inspection pin offer? The inspection pin is manufactured with a tolerance of ±0.002 mm, ensuring consistent contact for comparison and verification tasks with the M323.C06. Is the material suitable for regular workshop use? Yes, the M323.C06 is made from special steel in a workshop version finish, offering durability for frequent handling and routine inspection tasks. How is the gauge pin delivered for safe storage? The item is supplied in a protective transport case to maintain surface condition and dimensional integrity during storage and transport. Can this pin be used for quick go/no‑go checks? The fixed diameter and tight tolerance make the pin well suited for pass/fail checks, alignment verifications and comparative measurements in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Test Pin 18.23 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
High-precision inspections are supported by the combination of ±0.002 mm accuracy, special steel construction and a compact 50 mm shank for stable handling; order the part directly via Metav Werkzeuge or consult their specialists for application advice. Gauge pin, single, 18.23 mm — precision inspection pin (Metav IndustryLine) The Gauge pin, single, 18.23 mm, 50 mm provides a compact, workshop-grade solution for verifying bore diameters and end measurements in routine quality checks and fixture set-ups. Workshop version for robust use Diameter 18.23 mm for precise fits Tolerance ±0.002 mm for repeatable checks Supplied in a transport case Consistent dimensional control with measurable accuracy This inspection pin delivers a defined measurement datum through its 18.23 mm diameter and calibrated manufacturing tolerance of ±0.002 mm, enabling reliable pass/fail assessment in production routines. The tight tolerance reduces uncertainty in repeat measurements and shortens decision cycles on the shop floor, turning raw measurement data into quick, actionable conclusions. The compact 50 mm length maintains rigidity for short-span bore verification while keeping handling straightforward during frequent checks. Durable design for workshop environments Manufactured from special steel, the pin is specified for workshop use and intended to withstand repeated insertion and extraction cycles without rapid wear. The workshop version designation indicates enhanced surface robustness and dimensional stability under typical handling stresses. Supplied in a transport case, the component is protected during storage and transit, lowering the risk of accidental damage and preserving the calibrated geometry for longer service life. Practical application and measurement workflow benefits As a single gauge pin, this tool is optimised for quick in-process checks of holes, locating bores and end stops where a fixed reference is required. The short shank length reduces bending effect and simplifies alignment in fixtures, while the pronounced diameter gives a clear go/no-go condition for mating parts. Use of this pin in combination with micrometres or bore gauges supports traceable dimensional control and helps document conformity within production batches. Reliability through a trusted supply chain Sourcing the pin from Metav IndustryLine ensures logistical continuity and a quality filter at the European distribution hub in Emmerich. Metav’s broad product range and long-standing customer base reflect a pragmatic approach to precision tools: consistent availability, clear product data and streamlined delivery are positioned to support workshop throughput and minimise supplier overhead. This reliability complements the technical merits of the pin itself and supports long-term process stability. Choose this Metav IndustryLine precision gauge pin for reliable, repeatable bore verification — contact Metav Werkzeuge for ordering or application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.I23 GTIN: 4061905449840 Brand: Metav IndustryLine Category: Messstifte Facts Diameter: 18.23 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version (robust specification) Supplied in transport case Single gauge pin for bore and end measurements FAQ What measurement tolerance can be expected with this pin? The pin is manufactured to a tolerance of ±0.002 mm, which supports tight repeatability for workshop inspection tasks. Is the pin suitable for checking bore diameters and end measurements? Yes, the gauge pin is designed for quick verification of bore diameters and end measurements; its 18.23 mm diameter and 50 mm length provide a stable reference for such checks. What material is used for the pin and how does it affect durability? The pin is made from special steel, giving enhanced surface robustness and dimensional stability appropriate for workshop conditions. Does the product arrive protected for transport and storage? The pin is supplied in a transport case to reduce the risk of damage during transit and to preserve the measurement geometry. How is the product identified for ordering or inventory? The item is listed under SKU M323.I23 and GTIN 4061905449840 for procurement and stock management. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 11.45mm Test Pin Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the precise ±0.002 mm tolerance together with the compact 11.45 mm diameter and a 50 mm shank for reliable go/no‑go and end‑measure checks in busy workshops; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 11.45 mm Ø, length 50 mm — Metav IndustryLine The gauge pin, single, 11.45 mm Ø, length 50 mm is a hardened inspection pin designed for precise plug and fixture verification in workshop and small‑parts metrology. Workshop version for everyday use Diameter guaranteed at 11.45 mm Tolerance ±0.002 mm for fine inspection 50 mm shank for secure seating Precision that minimises inspection variability The compact inspection pin delivers a measured tolerance of ±0.002 mm, which corresponds to a two‑micrometre sensitivity and supports tight control limits in standard quality checks. Made from special steel, the pin provides dimensional stability that helps reduce the influence of thermal and mechanical variation during repetitive checks. Such a tolerance level places the component in the realm of high‑precision workshop gauging, enabling confident decision rules for pass/fail measurements and repeatable setup references in production. Compact design suited to fine mechanical tasks With an external diameter of 11.45 mm and a 50 mm length, the pin falls into the micro‑range for caliper and gauge tooling, making it particularly useful where space is limited but accuracy remains critical. The short, stiff geometry supports minimal bending and straightforward handling when used as a master plug or in fixture alignment. This compact format is appropriate for small components, gauge blocks and delicate assembly jigs where ease of placement and stability are decisive for reliable readings. Robust workshop handling and serviceability Specified as a workshop version, the pin is built to withstand routine handling while maintaining calibrated dimensions. The choice of special steel balances wear resistance and machinability so that the pin remains true over repeated cycles without introducing avoidable wear to mating parts. The straightforward geometry simplifies inspection and replacement logistics: when a master pin is identified as out of tolerance, a like‑for‑like swap restores benchmark accuracy without complex recalibration procedures. Contact Metav Werkzeuge for availability and tailored advice on the Metav IndustryLine gauge pin M323.B45 — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for prompt workshop support. Technical Data Article number: M323.B45 GTIN: 4061905064593 Label: Prüfstift, einzeln, 11,45 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 11.45 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Accuracy class: ±0.002 Special features Material: Special steel Version: Workshop execution Category: Gauge pin / Inspection pin SKU: M323.B45 FAQ What is the declared tolerance of this gauge pin? The Metav IndustryLine gauge pin M323.B45 is specified with a tolerance of ±0.002 mm, suitable for precise workshop gauging and tight inspection limits. Can this pin be used for fixture alignment in assembly jigs? Yes, the 50 mm shank and compact 11.45 mm diameter make this inspection pin appropriate for fixture alignment and plug checks in small to medium assembly jigs. What material is the pin made from and how does that affect wear? The pin is manufactured from special steel, chosen to deliver a balance of wear resistance and dimensional stability under typical workshop handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 14.02mm Gauge Pin, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop‑ready protection and a tight ±0.002 mm tolerance for consistent end‑dimension inspection; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin, single 14.02 mm (50 mm length) — Metav IndustryLine A gauge pin, single 14.02 mm, engineered for precise end‑dimension checks and robust workshop inspection tasks. Special steel construction for durability Precision ground to ±0.002 mm tolerance 14.02 mm diameter for end‑dimension checks Delivered in protective transport case Precision that supports reliable inspection This measuring pin is precision ground to a tolerance of ±0.002 mm, which ensures highly reproducible results during go/no‑go checks and dimensional verification. The special steel construction delivers stable geometry under repeated contact, reducing the risk of false readings caused by surface wear. In practical terms, this level of accuracy supports quality control routines where small deviations have direct impact on assembly fit and downstream processes. The hard‑finished surface also eases cleaning and prolongs service life, so inspection cycles remain efficient and predictable. Built for workshop use and safe handling Designed as a workshop version, the pin’s 50 mm length offers a secure grip while measuring or inserting into fixtures; the compact form factor suits bench jigs and handheld inspection tasks. Delivered in a protective transport case, the item is ready for safe storage and dispatch between workstations, reducing downtime caused by handling damage. The combination of robust material and transport protection makes the component suited to routine shop‑floor use where durability and rapid access are priorities. Applications and integration into inspection workflows As a single gauge pin, this tool is intended for end‑dimension checks, alignment aids and fixture set‑up in small‑to‑medium series production. The nominal 14.02 mm diameter is suitable for verifying bores, holes and mountings within tight tolerance bands, and the pin can be integrated into existing inspection fixtures or used alongside comparators and micrometres for double‑control routines. Its straightforward geometry means it is also convenient as a reference artefact in setting up measuring stations. Practical handling and procurement benefits The compact mass and finished surface ensure rapid handling and minimal measurement disturbance during repetitive checks. Supply through Metav benefits from a European quality‑filtering process that supports consistent stock and clear traceability back to the workshop level. For procurement and inventory planning, the simple form factor and robust finish reduce replacement frequency, contributing to lower lifecycle handling and maintenance effort. Contact Metav Werkzeuge for procurement and workshop advice on the Metav IndustryLine gauge pins — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.E02 GTIN: 4061905068614 Material: Special steel Tolerance: ±0.002 mm Length: 50 mm Nominal diameter: 14.02 mm Weight: 0.1 kg Numbers / Core technical data Diameter: 14.02 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Protective transport case included Precision ground surface Single gauge pin Category: Gauge pins FAQ What level of dimensional accuracy does this gauge pin provide? The gauge pin is ground to a tolerance of ±0.002 mm, which is suitable for demanding workshop and inspection tasks requiring tight repeatability. Is the pin suitable for continuous shop‑floor use? Yes, the workshop version and the special steel finish are intended to withstand regular handling; the protective transport case further supports shop‑floor logistics. Can the pin be used for bore verification and fixture set‑up? The 14.02 mm nominal diameter makes the pin well suited for end‑dimension checks, bore verification and fixture alignment in small‑ to medium‑series production. What is supplied with the gauge pin on delivery? The single gauge pin is supplied in a protective transport case to prevent handling damage during transport and storage. How does this item integrate into a quality workflow from Metav? As part of the Metav IndustryLine, the pin fits standard inspection routines and benefits from Metav’s European quality‑filtering and procurement logistics. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 14.05mm Gauge Pin, Single, Special Steel, Workshop Version in Case - Metav IndustryLine
Compact workshop-grade performance with precise dimensions and reliable handling: the 14.05 mm diameter, 50 mm length and ±0.002 mm accuracy combine for consistent end‑measure checks and fixture references. The instrument is supplied in a protective case and is ready for immediate use in production and inspection environments. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.E05 — 14.05 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.E05 is a workshop-grade inspection pin designed for end‑measure verification and fixture alignment in precision engineering and quality control. Workshop execution, robust design 14.05 mm diameter, ±0.002 mm tolerance 50 mm length, compact handling Delivered in protective case Repeatable precision for end‑measure control The gauge pin is manufactured for repeatability where tight clearances matter: a nominal 14.05 mm diameter maintained to ±0.002 mm ensures that each reference contact produces comparable results. In practical terms, this level of accuracy supports fine inspection tasks and end‑measure controls in small to medium assemblies; the item falls into the micro range of measuring tools (suitable for applications between 10 mm and 100 mm), where stiffness of short shanks and minimal bending are decisive for measurement fidelity. The declared tolerance is a direct guarantee for processes that depend on repeatable go/no‑go references. Workshop-ready construction for reliable handling Constructed from special steel and finished as a workshop execution, the pin balances durability with manageable mass: the 50 mm length aids access in tight fixtures while the modest 0.1 kg weight simplifies manual positioning. Supplied in a protective case, the part arrives ready for storage or safe transport to the bench, reducing setup time and the risk of handling damage. The solid material and workshop specification provide robust contact surfaces that withstand frequent use without quick degradation, supporting dependable on‑bench measurement routines. Integration into inspection and jig workflows Designed to serve as a repeatable reference in fixtures, jigs and plug checks, the pin slots easily into established inspection chains and gauging rigs. Its compact dimensions make it suitable for small bores, end‑measure stops and alignment aids; the consistent diameter is ideal where interchangeability and quick verification cycles are required. For traceable procurement and dependable supply, this component is offered under the Metav IndustryLine range, which focuses on accessible precision and steady availability from the Emmerich stockroom. The gauge pin M323.E05 therefore combines practical workshop ergonomics with the precision demanded in routine quality assurance. Choose Metav Werkzeuge for reliable workshop precision — contact our team in Emmerich to discuss availability and delivery of the M323.E05 gauge pin (Metav IndustryLine) from stock. Technical data Article number: M323.E05 GTIN: 4061905065903 Description: Gauge pin, single, 14.05 mm diameter, 50 mm length Facts Diameter: 14.05 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Supplied in protective case Category: Gauge pins SKU: M323.E05 Brand: Metav IndustryLine FAQ What tolerance does this gauge pin hold? The gauge pin M323.E05 is specified with an accuracy of ±0.002 mm, suitable for fine inspection work and repeatable reference tasks. Can this pin be used for bore checks and end‑measure stops? Yes — the 14.05 mm diameter and 50 mm length make this probe ideal for small bore verification, end‑measure references and fixture alignment in workshop environments. What material is the pin made from? The component is made from special steel, selected for durable contact surfaces and regular workshop use. Is the gauge pin supplied ready for transport and storage? The product is delivered in a protective case as standard, which simplifies safe transport and bench storage. Which product range and SKU should be referenced when ordering? Order by referencing Metav IndustryLine and the SKU M323.E05 to ensure the correct gauge pin is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 16.14mm Gauge Pin Workshop Version, Special Steel, Precision ±0.002 - Metav IndustryLine
Take advantage of the combination of high radial accuracy ±0.002 mm, a compact 16.14 mm diameter and a robust 50 mm length for reproducible end-measurements; order the gauge pin directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. Gauge pin, single, 16.14 mm Ø, length 50 mm (M323.G14) — Metav IndustryLine Gauge pin, single, 16.14 mm Ø for precision end-measurements and fit checks in inspection benches and toolrooms Workshop-grade construction for daily use Diameter 16.14 mm with ±0.002 mm accuracy 50 mm length for secure end-contact measurement Made from special steel for wear resistance Reliable sub-millimetre control for small components The gauge pin is designed for repeatable end-measurements where dimensional certainty matters. With a nominal diameter of 16.14 mm and a stated accuracy of ±0.002 mm, the pin sits in the micro measurement category (suitable for ranges up to 100 mm), making it ideal for fine mechanical parts, small bores and precision fit verifications. The tight tolerance reduces uncertainty in go/no-go and plug gauge applications and supports consistent quality control across production runs. Durable construction that suits workshop environments Constructed in special steel and supplied in the workshop execution, the pin combines hardness with dimensional stability to withstand regular handling. The 50 mm length provides a secure bearing surface for end-face contact without compromising stiffness, while a mass of 0.15 kg ensures tactile handling during bench checks. These attributes translate into lower wear rates, longer intervals between replacements and dependable surface contact, helping to maintain measurement consistency over time. Practical integration into inspection routines Compact form factor and a straightforward geometry simplify use on manual gauges, fixture checks and calibration benches. The single-pin design supports end-of-shaft checks and small-assembly verification, and the clear labelling (SKU M323.G14, GTIN 4061905070266) eases inventory management and traceability. For workshops seeking to standardise inspection tooling, this pin offers a pragmatic balance of precision, durability and ease of handling, ensuring that inspection steps remain fast and verifiable. Contact Metav Werkzeuge to confirm suitability for specific inspection tasks and to secure timely delivery from stock at the Emmerich quality centre. Technical data Article number: M323.G14 GTIN: 4061905070266 Label: Prüfstift, einzeln, 16,14 mm Länge 50 mm Facts Diameter: 16.14 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.15 kg Category: Messstifte Special features Material: Special steel Version: Workshop execution Intended use: End-measurements / fit checks Story trigger: endmasse FAQ What accuracy can be expected from this gauge pin? The gauge pin offers an accuracy of ±0.002 mm, suitable for demanding inspection tasks requiring sub-hundredth-millimetre repeatability. Is the pin suitable for daily workshop use? Yes; the workshop-grade construction and special steel make the pin robust for regular bench measurements and fit checks. Which measurement tasks is this pin intended for? Ideal for end-measurements, plug-fit verification and small-bore checks where a 16.14 mm reference is required. How is the product identified for stock and traceability? The item is listed under SKU M323.G14 and GTIN 4061905070266 for streamlined inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 16.15mm Test Pin Single Workshop Version Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, ±0.002 mm accuracy and a compact 50 mm length for reliable end-measurements; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. M323.G15 gauge pin — 16.15 mm diameter, 50 mm length (Metav IndustryLine) The M323.G15 gauge pin is a single precision pin designed for end‑measurement and verification tasks in workshop and inspection environments. High-precision ±0.002 mm tolerance Diameter 16.15 mm for end-measurements 50 mm length with workshop-grade finish Made from special steel for repeatable use Precision that keeps production tolerances tight The gauge pin delivers a measured tolerance of ±0.002 mm, which provides confidence when checking end dimensions and fit tolerances in production or incoming inspection. With a nominal diameter of 16.15 mm, the pin is suited to final-size checks and verification of bore fits where minimal deviation matters. The fine tolerance reduces rework and scrap by enabling clear go/no‑go decisions at the bench, supporting faster throughput and consistent part quality. Durable construction for repeated workshop use Manufactured from special steel and specified as a workshop configuration, the pin combines wear resistance with stable geometry across repeated use. Its 50 mm length and compact mass (0.15 kg) ensure easy handling while maintaining the rigidity required for reproducible contact measurements. The robust finishing reduces the risk of surface damage that could bias results, so routine inspections remain reliable without frequent replacement. Simple integration into inspection routines and inventory Delivered as a single item with a clear SKU and GTIN, the pin is easy to catalogue within existing metrology setups. The compact format simplifies storage on inspection benches and in tool kits, while the clear technical specifications support traceable process documentation. Use of a standardised measuring pin aids repeatability across shifts and locations, making it straightforward to maintain a consistent quality baseline in mixed production environments. Contact Metav Werkzeuge for tailored advice on incorporating the M323.G15 gauge pin into inspection workflows or to request a quote from Metav IndustryLine via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.G15 GTIN: 4061905068089 Label: Prüfstift, einzeln, 16,15 mm Länge 50 mm Facts Diameter: 16.15 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single gauge pin Eclass: 21170231 FAQ What measurement accuracy can be expected from this gauge pin? The M323.G15 gauge pin is specified with an accuracy of ±0.002 mm, making it suitable for fine end‑measurement and verification tasks. Is the pin supplied individually or as a set? This item is supplied as a single gauge pin; the product designation indicates a single unit rather than a multi‑piece set. Which material is used for the pin and what are the benefits? The pin is made from special steel, chosen for dimensional stability and wear resistance so that repeated contact measurements remain consistent. Can this pin be used for checking bore diameters and end fits? Yes, the diameter of 16.15 mm and the compact 50 mm length make the pin well suited to end‑measurements and fit verification in bores and mating components. How is the product identified for procurement and inventory? Identification is via SKU M323.G15 and GTIN 4061905068089, which support straightforward cataloguing and reordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 18.02mm Gauge Pin Single Workshop Version, Special Steel, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the combination of industrial-grade precision, robust special-steel construction and compact handling for reliable reference measurements; order this precision gauge pin directly via Metav Werkzeuge or consult our specialists for specification matching. Gauge pin, single 18.02 mm — precision reference pin, 50 mm length (Metav IndustryLine) A gauge pin, single 18.02 mm, engineered as a workshop-grade reference for fit checks, end‑measurements and assembly verification Diameter 18.02 mm precision pin Tolerance ±0.002 mm Special steel construction Workshop-grade 50 mm length Precision where it matters for routine checks The compact reference pin delivers a consistently reproducible datum thanks to its ±0.002 mm tolerance, making it suitable for workshop inspection and bench checks. Manufactured from special steel, the component resists everyday wear while maintaining dimensional stability; this ensures that a single pin can serve as a trustworthy reference for repeated fit and clearance tests. The measured accuracy class supports routine quality control tasks in metalworking and assembly environments. Compact design that simplifies handling and storage With a 50 mm length and a nominal diameter of 18.02 mm, the pin combines reach and manoeuvrability in one compact package. The short, rigid form reduces flex during insertion and extraction, which supports reproducible measurements and speeds up gauging work. The moderate mass and ergonomic proportions allow straightforward handling at the workstation, reducing the time required for repetitive verification tasks without compromising on stability. Clear specification for integration into inspection workflows The delivered reference pin is clearly dimensioned and numerically specified, facilitating direct use in measurement protocols and documentation. The precise nominal diameter and declared tolerance enable integration with go/no‑go checks, plug gauges or bespoke test rigs where a defined fit diameter is required. The straightforward specification simplifies procurement and inventory management for production and maintenance departments alike. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin (SKU M323.I02) can be integrated into existing inspection routines and to request further technical details Technical data Article number: M323.I02 GTIN: 4061905071034 ECLASS: 21170231 SKU: M323.I02 Facts Diameter: 18.02 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Label: Gauge pin, single, 18.02 mm length 50 mm FAQ What is the declared dimensional tolerance for this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, ensuring high repeatability for reference and fit checks; product reference M323.I02 from Metav IndustryLine. Which material is used for the pin? The component is manufactured from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions. What are the exact dimensions of the pin? Nominal diameter 18.02 mm, overall length 50 mm, weight approximately 0.15 kg; SKU M323.I02. Is this pin intended for workshop use or laboratory metrology? The pin is described as a workshop execution, optimised for reliable routine measurements and assembly verification in production and maintenance environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Calibration Certificate For Gauge Pins, Single Item - Metav IndustryLine
Benefit from documented traceability and clear measurement confirmation for individual gauge pins up to 50 mm; practical documentation supports quality control and audit readiness. Obtain the calibration certificate directly via Metav Werkzeuge or consult our specialists for scheduling and documentation advice. Calibration certificate for gauge pins — for single pins up to 50 mm | Metav IndustryLine Calibration certificate for individual gauge pins, confirming measured values and traceability for workshop and QA use Traceable measurement confirmation For single gauge pins up to 50 mm Documented calibration with GTIN and SKU Reliable traceability that stabilises production quality A professionally issued calibration certificate provides a clear record of the measured values for an individual gauge pin, enabling repeatable inspection steps and reducing the risk of disputed measurements. The document records the measurement result and associated metadata such as GTIN and SKU, which simplifies inventory assignment and batch tracking. This transparency supports rational decision-making in quality control and streamlines acceptance procedures for incoming inspection. Clear documentation for audit and process control The calibration paperwork supplies a concise, auditable record that can be integrated into existing quality control systems and inspection workflows. Laboratories and workshop inspectors benefit from a standardised certificate that documents the measurement outcome and its traceability, helping to demonstrate conformity during internal and external audits. By converting individual measured values into verifiable documentation, the calibration certificate reduces ambiguity and supports corrective actions where tolerances are critical. Practical use in daily inspection routines Issued for a single measuring item, the certificate is compact and directly usable at the inspection station: the recorded values can be entered into inspection logs, digital quality systems, or maintenance records without additional interpretation. The certificate is especially useful where gauge pins serve as reference standards or are used in fixture set-up, since documented calibration ensures consistent baseline measurements and contributes to lower measurement uncertainty in routine checks. Arrange calibration and documentation through Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 to schedule a certificate or discuss specific measurement requirements Technical Data Article number: MKali.680 GTIN: 4061905048999 eClass: 25149002 SKU: MKali.680 Description: Calibration certificate for individual gauge pins up to 50 mm Core data Measurement range: up to 50 mm Weight: 0 kg Special features Individual certificate for single gauge pins Category: Calibration of measuring tools Traceable documentation for quality control FAQ What does the calibration certificate confirm? The certificate confirms the measured value of the individual gauge pin and provides documented traceability for quality assurance and inspection records. Is the certificate suitable for use in audits? Yes. The calibration certificate supplies auditable documentation that can be included in quality system files and inspection records. Can the certificate be linked to inventory items? Yes. The recorded GTIN and SKU on the certificate allow straightforward linking to inventory systems and component tracking. Is this certificate issued for single gauge pins or sets? This calibration certificate is issued for a single gauge pin and documents the measurement result for that individual item. How does the certificate help reduce measurement uncertainty? By providing documented measurement values and traceability, the certificate establishes a known reference state for the gauge pin, which helps to maintain consistent inspection conditions and reduce variability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Test Pin 11.14mm Diameter Workshop Version, Special Steel - Metav IndustryLine
The combination of high precision and robust special steel construction ensures consistent measuring results and long service life; take advantage of the tight ±0.002 mm tolerance and compact 50 mm length for precise end‑measure inspections. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for matching gauge sets. Gauge pin, single — 11.14 mm Ø, 50 mm length (Metav IndustryLine) A precision gauge pin designed for end‑measure checks and alignment in metrology and workshop applications. Workshop version, robust construction Diameter 11.14 mm, tight tolerance ±0.002 50 mm overall length for compact use Made from special hardened steel Accuracy that reduces rework and speeds inspection The gauge pin M323.B14 is made for measurable repeatability: with a declared accuracy of ±0.002 mm, this test pin provides the level of control required for fine inspection tasks and plug‑gauge comparisons. Such a tolerance helps to reduce rejects and rework by ensuring that mating bores and fixtures are verified against a stable reference. In practical terms, the close dimensional control improves process reliability during small‑batch runs and final checks, turning a simple manual test into a reproducible verification step for quality documentation. Durable construction for frequent workshop use Manufactured from special steel, this single gauge pin is specified as a workshop execution to withstand regular handling and routine use. The compact 50 mm length and single‑piece design make it easy to store and to include in portable inspection kits, while the solid material selection contributes to wear resistance across repeated insertions. Where surface finish and roundness are critical, the stable geometry of the pin supports consistent contact conditions, which in turn preserves measurement integrity over time and ensures reliable fit checks in assembly operations. Practical handling and system integration The compact dimensions—11.14 mm diameter and short overall length—make the pin particularly suitable for tight measuring spaces and end‑position checks in fixtures. Supplied as an individual test pin, it suits ad‑hoc inspections, replacement of worn pins in gauge sets, or expansion of existing plug‑gauge assortments. Backed by Metav IndustryLine’s focus on accessible precision, the component bridges workshop practicality with traceable quality: clear specification and consistent manufacturing mean fewer interruptions on the production floor and faster verification cycles. For tailored advice or to order the Metav IndustryLine gauge pin M323.B14, contact Metav Werkzeuge for rapid assistance and mutual selection of compatible gauge components Technical Data Article number: M323.B14 GTIN: 4061905064425 Brand: Metav IndustryLine Label: Gauge pin, single, 11.14 mm length 50 mm Facts Diameter: 11.14 mm Overall length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Supplied singly Material: Spezial‑Stahl FAQ What tolerance does the pin offer for dimensional checks? The declared tolerance for this gauge pin is ±0.002 mm, which makes the M323.B14 suitable for precise verification tasks where close dimensional control is required. Is the 11.14 mm diameter suitable for plug‑gauge comparisons? Yes. The 11.14 mm nominal diameter of the gauge pin is intended for end‑measure checks and can be used as a reference in plug‑gauge comparisons and fit verifications. Can this pin be used in assembly fixtures and jigs? The robust workshop design and compact 50 mm length permit use in fixtures and jigs for alignment and verification; the solid construction supports repeated handling in an industrial environment. Is the pin delivered as part of a set or individually? This item is supplied individually as a single test pin and is suitable for adding to existing gauge assortments or for replacement purposes. Which material is used for the gauge pin and what does it mean for wear? The pin is made from special steel, a specification chosen to provide stable geometry and resistance to routine wear during inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com