Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
1.51mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Combining workshop-grade construction, a tight tolerance of ±0.001 mm and a 50 mm engagement length, this single gauge pin ensures reliable end‑measurement and repeatable fit checks; order directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin M323.151 – 1.51 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.151 is a workshop‑grade precision test pin for end‑measurement and fit verification in inspection benches and jigs. Workshop-grade precision, ±0.001 mm accuracy Diameter 1.51 mm, ground to tight tolerance 50 mm length for consistent engagement Supplied in protective transport case Precise tolerances for confident quality control The principal advantage of this test pin is its ±0.001 mm tolerance, which translates into measurable reduction of fitting errors and rework in production. Ground from special steel, the pin delivers stable dimensional performance under repeated use, making it suitable for validating bore sizes and mating parts where tight clearances are required. For inspection processes that demand consistent pass/fail criteria, the fine tolerance offers a defensible, reproducible reference that integrates seamlessly into existing gauging routines. Geometry and handling that improve repeatability A length of 50 mm provides sufficient engagement to reduce measurement scatter while remaining compact for bench‑mounted fixtures. The 1.51 mm diameter is finished for accurate seating in pin blocks or custom fixtures, enabling repeatable positioning during end‑measurement tasks. The workshop designation reflects robust finishing and handling characteristics that resist deformation under normal use, so routine gauging yields consistent results and lower measurement uncertainty across batches. Practical integration into inspection workflows Designed as a single test pin for targeted checks, this component fits into both manual and semi‑automated inspection setups. Its compact form factor allows rapid exchange and grouping in pin sets when multi‑size verification is needed. Where traceable documentation or batch control is required, the clear marking and consistent dimensions support traceability and straightforward inventory management, assisting quality teams in maintaining compliance with internal inspection standards. Reliability from a trusted precision partner Produced for workshop use and supplied ready for transport in a protective case, this gauge pin benefits from Metav IndustryLine’s approach to accessible precision. The combination of durable material selection and exacting machining offers a cost‑effective reference tool that supports reliable assembly and verification processes. For operations seeking to standardise routine gauging without adopting complex instrumentation, this test pin is a pragmatic choice that balances accuracy and usability. For tailored advice on integrating Metav IndustryLine gauge pins into inspection setups or to secure reliable supply from Metav Werkzeuge in Emmerich, please contact our sales team via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M323.151 GTIN: 4061905054648 Label: Prüfstift, einzeln, 1,51mm, +/- 0.001 mm Länge 50 mm Weight: 0.004 kg Material: Special steel Facts Diameter: 1.51 mm Length: 50 mm Tolerance: ±0.001 mm Special features Workshop execution Single gauge pin for end‑measurement Supplied in protective transport case FAQ What is the dimensional tolerance of this test pin? The M323.151 gauge pin from Metav IndustryLine is manufactured to a tolerance of ±0.001 mm, suitable for precise fit and end‑measurement checks. Which material is used for the pin and why is it relevant? The pin is made of special steel, a choice that provides the necessary hardness and wear resistance for repeated gauging without rapid dimensional change. Can this pin be used in pin blocks or custom fixtures? Yes; the 1.51 mm diameter and ground finish make the pin compatible with standard pin blocks and bespoke fixture designs intended for bore and fit verification. Is the M323.151 suitable for routine production inspection? Its workshop execution and 50 mm engagement length make the pin well suited for routine inspection tasks where repeatability and compact handling are priorities. How should the pin be stored to preserve accuracy? Store in its protective transport case and avoid corrosive environments; periodic visual checks and cleaning with a lint‑free cloth maintain reliable performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.52mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
The combination of micrometre-level accuracy (±0.001 mm), a 1.52 mm diameter and a 50 mm length delivers repeatable end‑dimension checks and robust handling in workshop environments; order directly via Metav Werkzeuge or request advice from our consultants for integration into inspection routines. Gauge pin M323.152 — 1.52 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) A Gauge pin M323.152 designed for precise end‑dimension checks and routine workshop inspection tasks, supplied as a single test pin in a protective transport case. Workshop-grade construction Diameter 1.52 mm with ±0.001 mm tolerance 50 mm overall length for stable handling Supplied in protective transport case Repeatable micro‑diameter control for critical fits The 1.52 mm diameter combined with a tolerance of ±0.001 mm (one micron) provides a level of precision typically required for tight fits and critical end‑measurements in production and QA contexts. This level of accuracy reduces uncertainty in pass/fail assessments and supports consistent assembly processes. The dimensional stability of the pin makes it a reliable reference for short‑range verification tasks where sub‑micrometre deviations can affect part function. Robust design that suits everyday workshop demands Built as a workshop‑grade component from special steel, the test pin balances hardness and toughness to withstand frequent seating, insertion and removal cycles. The 50 mm overall length offers convenient handling and helps ensure secure seating in gauges or fixtures, improving repeatability during batch checks. The construction supports sustained use without rapid wear, contributing to predictable maintenance intervals and fewer measurement interruptions. Streamlined inspection workflows and fixture compatibility As a single test pin, the component integrates easily into gauge sets, plug gauges and inspection benches used for end‑dimension assessments. The compact 50 mm form factor and consistent diameter simplify positioning in fixtures and reduce setup time, enabling faster throughput in routine quality control. The included protective transport case preserves the pin’s condition during storage and transit, maintaining measurement integrity across shifts. Trusted sourcing and pragmatic supply for production environments Supplied under the Metav IndustryLine, the pin benefits from a supplier network that emphasises consistent quality and dependable fulfilment from Emmerich. The product aligns with Metav’s goal of making high‑precision tools accessible for workshops and industry alike, backed by a broad product range and established logistics. This reliability supports stable inspection capacity and reduces the risk of downtime due to missing reference components. For workshop teams requiring dependable micro‑gauge control, contact Metav Werkzeuge to source the Metav IndustryLine gauge pin M323.152 and arrange delivery from our Emmerich facility — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M323.152 GTIN: 4061905054655 Manufacturer: Metav IndustryLine Facts Diameter: 1.52 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop‑grade execution Material: Special steel Single test pin, supplied in protective transport case Category: Gauge pins FAQ What tolerance does this gauge pin provide? The gauge pin M323.152 provides a tolerance of ±0.001 mm, suitable for micrometre‑level end‑dimension checks. Which applications is the pin best suited for? Ideal for end‑dimension verifications, plug‑gauge checks and short‑range fit tests in workshop and production inspection routines. What material is used for the pin? The test pin is manufactured from special steel, chosen for wear resistance and dimensional stability under routine use. Is the pin delivered ready for storage and transport? The M323.152 is supplied as a single test pin in a protective transport case to preserve condition during storage and transit; no specific calibration certificate is listed in the product data. How does the 50 mm length affect handling and fixture use? The 50 mm overall length improves handling and seating stability in fixtures, aiding repeatable placement and faster routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.53mm Test Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop-ready robustness and micrometre-level accuracy to secure reliable end‑measurement results. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for integration into inspection routines. M323.153 gauge pin — Gauge Pin 1.53 mm, ±0.001 mm (Metav IndustryLine) M323.153 is a single gauge pin designed for precise end‑measurement and inspection tasks in workshop environments Precision diameter 1.53 mm ±0.001 mm accuracy 50 mm hardened length for repeatable seating Made from special steel, workshop-grade finish Supplied in protective transport box Precision where measurement tolerance matters The M323.153 gauge pin provides micrometre-level control thanks to its declared ±0.001 mm tolerance. Such fine accuracy makes this inspection pin suitable for high‑precision end‑measurements, checking bore sizes and verifying small assembly fits where a tight tolerance band is required. The specified diameter of 1.53 mm is produced and checked to ensure consistent contact geometry; this reduces measurement uncertainty caused by pin deformation or variable seating. In practical terms, the tight tolerance shortens verification time by minimising rework and doubt during quality checks, supporting efficient and documented inspection procedures. Built for repeatability in active workshop use With a hardened length of 50 mm, the pin offers reliable engagement depth while remaining easy to handle on the shop floor. The component is manufactured from special steel and finished as a workshop‑grade item, giving a balance of wear resistance and economical service life in routine inspection tasks. Supplied individually and protected in a transport box, the pin arrives ready for immediate use and safe storage during transit. These delivery and build features support repeatable seating and consistent contact points, which are critical when pins are used as reference end‑measures in fixtures or during incoming inspection. Practical applications and easy integration This inspection pin is designed primarily for end measurement tasks: assessing bore diameters, validating jig seating and setting up precision fixturing. As a single‑piece gauge, it complements go/no‑go sets and can be used alongside calipers and micrometres to cross‑check results and establish traceable references. The simple geometry reduces the need for complex handling procedures, and the compact format suits bench checks and assembly verification. For workshops seeking a pragmatic, high‑accuracy pin, the component simplifies process control and feeds reliable dimensional data into quality records. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for personalised advice and order assistance — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.153 GTIN: 4061905054662 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 1,53mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 1.53 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Version: Workshop execution Delivery: Single item in transport box Intended use: End measurement / inspection FAQ What is the declared tolerance for this gauge pin? The declared tolerance for the M323.153 gauge pin is ±0.001 mm, ensuring micrometre‑level repeatability for end measurements. Can the gauge pin be used for bore inspection and fixture set‑up? Yes. The inspection pin from Metav IndustryLine is suitable for bore checks, fixture seating and quick verification tasks on the shop floor. How is the M323.153 delivered and stored? The gauge pin is supplied as a single item and comes protected in a transport box to prevent damage during shipment and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.54mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of a reproducible reference with ±0.001 mm accuracy and a compact 1.54 mm nominal diameter in a 50 mm length for reliable alignment and inspection tasks; combine precision, workshop robustness and straightforward procurement — order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.154 — single gauge pin, 1.54 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The Gauge pin M323.154 is a single high-precision inspection and alignment pin designed for tight-tolerance checks and fixture referencing in precision engineering and toolmaking. High precision ±0.001 mm tolerance 1.54 mm nominal diameter for tight fits 50 mm special-steel length for secure seating Workshop-grade finish for repeated use Reproducible accuracy for inspection and alignment A compact gauge pin with ±0.001 mm tolerance (±1 µm) provides a stable reference for pass/fail checks, fixture alignment and micro-assembly control. The extremely narrow allowance means that positional variance is reduced when used as a plug or locating element in inspection jigs; this supports a consistent quality flow and fewer downstream adjustments. Such dimensional certainty is particularly valuable where cumulative tolerances determine final acceptance. Durable material and workshop-grade execution Manufactured from special steel, the pin is specified at 50 mm overall length and finished for workshop use, which balances wear resistance with handling convenience. The combination of material choice and workshop execution reduces surface degradation in repeated seating operations, extending service life in everyday metrology tasks. This makes the item suitable as a durable reference in production test rigs or as a reliable datum when setting up small-batch fixtures. Micro-category precision for fine components With a nominal size of 1.54 mm, the product falls into the micro measurement category — compact items intended for fine-mechanical and small-part work. Such a designation indicates suitability for micro parts, delicate assemblies and toolmaking applications where short overall length improves stiffness and reduces bending-related error. The single-pin format simplifies insertion and removal during sequential checks while maintaining the pinpoint accuracy expected in high-precision shops. For workshop-ready precision and technical advice based on Metav IndustryLine standards, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange procurement or discuss integration into existing inspection fixtures. Technical data SKU: M323.154 GTIN: 4061905054679 Manufacturer: Metav IndustryLine Facts Nominal diameter: 1.54 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Special features Material: special steel Workshop version Single gauge pin ECLASS: 21170231 FAQ What level of accuracy does the gauge pin provide? The gauge pin M323.154 delivers an accuracy of ±0.001 mm (±1 µm), making it suitable for very fine tolerance checks in precision engineering. For which applications is this pin intended? This Metav IndustryLine gauge pin is intended for inspection, fixture alignment and micro-assembly tasks where compact, repeatable reference points are required. Is the pin suitable for repeated seating in production jigs? Yes; the workshop-grade execution and special-steel construction of the M323.154 are designed for repeated use in production and inspection environments. How does the 50 mm length affect measurement stability? A 50 mm length provides a balance between reach and stiffness; it permits secure seating in fixtures while limiting bending, which supports repeatable outcomes for small-component checks. Does the pin come as a single item or in sets? The product is supplied as a single gauge pin under SKU M323.154; set availability is not indicated in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.55mm Test Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of ±0.001 mm repeatability together with a compact 1.55 mm diameter and 50 mm reach for reliable end‑measure checks and probe calibration in workshop inspection routines. Order the M323.155 gauge pin directly via Metav Werkzeuge or consult our specialists for process integration. M323.155 gauge pin — 1.55 mm diameter, ±0.001 mm workshop grade (Metav IndustryLine) A M323.155 gauge pin designed for high‑precision end‑measure verification and tight‑tolerance probing in workshop and inspection fixtures. ±0.001 mm tolerance for fine measurement control 1.55 mm diameter for small‑bore and probe tasks 50 mm length for deeper access in assemblies Workshop‑grade special steel construction Precision that supports clear go/no‑go decisions The compact design delivers a defined contact surface with a ±0.001 mm tolerance, making the gauge pin suitable for high‑resolution verification during in‑process checks and fixture set‑up. The controlled diameter of 1.55 mm minimises play in small bores and test jigs, while the 50 mm length allows access to recessed features. Such dimensional certainty reduces cycle‑time wasted on ambiguous results and supports consistent pass/fail decisions in routine quality control. Built for robust workshop handling and repeatability Manufactured in workshop‑grade special steel, the pin resists wear from repeated seating and contact against hardened test surfaces. The single‑piece design ensures minimal deformation under normal probe pressures, so measurement drift between cycles is reduced. Where repeatable tactile probing and end‑measure assessment are required, the mechanical stability of this gauge pin improves process reliability and lowers rework rates. Material choice and maintenance explained The selected special steel balances hardness and toughness to extend service life without becoming brittle. Regular inspection and light lubrication of contact areas preserve surface integrity; if optical inspection or calibration routines are in place, the pin’s consistent geometry supports traceable checks. For calibration and documentation purposes, the compact geometry simplifies handling and makes the pin suitable for integration into existing inspection protocols and probe qualification sequences. Practical applications and compatibility with inspection equipment This gauge pin is ideal for small‑bore gauging, probe tip verification, fixture alignment and end‑measure checks in machining and assembly environments. The form factor suits manual and automated probing systems as well as comparator fixtures where precise reference diameters are required. The combination of 1.55 mm diameter and tight tolerance supports use in precision mechanical workshops, toolrooms and metrology benches where small‑feature control matters most. For workshop calibration and fixture planning, contact Metav Werkzeuge in Emmerich to request technical details or to discuss the M323.155 gauge pin for specific inspection tasks Technical data Article number: M323.155 GTIN: 4061905054686 Category: Gauge pin (test pin) Facts Diameter: 1.55 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Version: Workshop execution Single‑piece gauge pin for end‑measure checks FAQ What is the intended use of this gauge pin? The M323.155 gauge pin is intended for small‑bore gauging, probe verification and end‑measure checks in workshop inspection setups. How precise is the M323.155 gauge pin? This Metav IndustryLine gauge pin is specified to ±0.001 mm, providing high repeatability for fine measurement control. Which materials is the pin compatible with during inspection? The M323.155 is a reference artefact and is used to verify measurement systems; it is made from special steel and is compatible with standard probe and fixture interfaces. Can the pin be used in automated probing systems? Yes, the compact 1.55 mm diameter and 50 mm length make the pin suitable for integration into manual and automated probing and fixture systems. Is the M323.155 supplied as a single unit or in sets? The listed item is supplied as a single gauge pin; consult Metav Werkzeuge for set configurations or matched sizes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.56mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
High-precision end‑measure control is achieved by combining ±0.001 mm accuracy with a slim 1.56 mm diameter and a 50 mm effective length, providing reproducible fit checks and inspection readings; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.156 gauge pin — Ø 1.56 mm, ±0.001 mm, 50 mm The M323.156 is a workshop-grade gauge pin for precision end‑measure checks and fit control in inspection, jig setting and tool alignment. Workshop-grade special-steel construction High precision: ±0.001 mm accuracy Supplied in a protective transport case Accurate end‑measure checks with industrial precision The compact pin delivers exceptionally tight tolerances, specified at ±0.001 mm, which supports repeatable dimensional control where minimal clearance or interference fits are critical. The combination of a 1.56 mm diameter and a 50 mm length keeps bending effects low while offering sufficient engagement for reliable readings. Where process stability and traceable measurements matter, this measuring pin reduces rework and shortens inspection cycles by making tolerance checks straightforward and verifiable. Engineered for workshop use and simple handling Built as a workshop‑grade tool from special steel, the pin balances hardness with corrosion resistance to withstand regular use in a production environment. The lightweight, compact design eases manual handling and fast positioning in small bores or jigs; the included protective case simplifies transport between bench and machine. For operators, this means quicker setup times and less handling-induced variation compared with bulkier measuring items. Ideal for fine mechanical tasks and fit verification Classified within the micro‑range, the pin is tailored to fine mechanical and precision‑engineering applications such as gauge setting, end‑measurement verification and fit testing of small diameters. It functions as a direct reference for pass/fail checks and as a master gauge in inspection routines, supporting consistent quality control at the component level and integration into established measuring procedures. Check availability and specify technical requirements with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and delivery options Technical data SKU: M323.156 GTIN: 4061905054693 Category: Gauge pins (pin gauges) Facts Diameter: 1.56 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Workshop-grade configuration Supplied in a protective transport case Intended use: End-measure and fit control FAQ What tolerance does the M323.156 gauge pin offer? The M323.156 gauge pin is specified to ±0.001 mm, enabling very fine tolerance checks for small-diameter fits. Which material is used for this measuring pin? This measuring pin is made from special steel, selected for its wear resistance and dimensional stability in workshop conditions. Is the pin supplied with any protection for transport? Yes, the M323.156 is supplied in a protective transport case to prevent damage during storage and movement. For which measurement range is this pin intended? The pin is a micro‑range measuring tool, designed for precision work around the 1.56 mm diameter class, ideal for fine mechanical and inspection tasks. Can the gauge pin be used for jig setting and inspection masters? Yes, the M323.156 is suitable as a master reference in jig setting and as a go/no‑go reference for small-bore inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.57mm Test Pin Length 50mm ±0.001mm Workshop Version in Case - Metav IndustryLine
Take advantage of the combination of exact repeatability, compact dimensions and workshop‑hardened construction for reliable end‑measurement tasks; order the M323.157 test pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.157 test pin — precision gauge pin (1.57 mm, ±0.001 mm) by Metav IndustryLine The M323.157 test pin is a workshop‑grade gauge pin designed for precise end‑measurements and fitting checks in small‑part inspection and toolmaking. Precision tolerance ±0.001 mm Diameter 1.57 mm ground to size Length 50 mm workshop grade Special steel for wear resistance Ensure repeatable fits with sub‑micrometre control A tolerance of ±0.001 mm makes this pin suitable where tight clearances determine part acceptance. The nominal diameter of 1.57 mm is produced to gauge standards so that mating bores and plug gauges can be verified reliably; this reduces scrap and rework by providing a consistent, objectively measurable reference. The compact form is particularly advantageous for end‑measurement and assembly checks where space is limited and repeatability is essential. Durable workshop construction for frequent handling Built as a workshop grade instrument from special steel, the pin tolerates regular handling and inspection routines without rapid wear. The 50 mm active length offers a practical balance between reach and rigidity for small components and fixtures. Where multiple insertions are required during production runs, the robust material and precision finish maintain dimensional stability, extending service intervals and preserving measurement integrity. Easy procurement and straightforward kit integration Traceability is supported by the clear identifier M323.157 and the product GTIN, simplifying stock management and reordering. The pin integrates directly into existing pin trays, gauge sets and inspection fixtures, enabling efficient calibration workflows and reduced setup time. As an element of a calibrated inspection routine, the component provides a concise reference point that streamlines go/no‑go decisions and supports consistent quality control. For procurement, stock enquiries or compatibility guidance on the M323.157 test pin, contact Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com, +49 2822 7131930) for personalised technical support and delivery options. Technical data Article number: M323.157 GTIN: 4061905054709 Manufacturer: Metav IndustryLine Material: Special steel Special version: Workshop execution Numbers / Core technical data Diameter: 1.57 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Designs / Special features Single test pin Workshop grade Ground to gauge dimension Intended for end‑measurement tasks FAQ What tolerance does the test pin offer? The M323.157 test pin is specified with a tolerance of ±0.001 mm, suitable for high‑precision go/no‑go and fit checks. Which material is the pin made from? The pin is manufactured from special steel and supplied in a workshop‑grade finish to resist wear during repeated use. Is the pin suitable for small‑bore inspection and assembly checks? Yes, the 1.57 mm diameter and 50 mm length make the pin appropriate for small‑bore verification and component assembly control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.58mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine sub‑micrometre accuracy, workshop‑grade construction and compact handling for consistent end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 1.58 mm – ±0.001 mm accuracy, 50 mm length (Metav IndustryLine) A gauge pin, single, 1.58 mm, designed for precise end‑dimension inspection and robust workshop measurement tasks. ±0.001 mm dimensional accuracy Workshop‑grade special steel construction Supplied in protective transport case Accurate measurement for reliable end‑dimension checks The combination of ±0.001 mm tolerance and a slender 1.58 mm diameter makes this pin ideal where tight end‑dimension control matters. As a hardened inspection pin it provides a measurable, repeatable reference for go/no‑go testing, pin gauges and ending measurements in small‑part production. The described tolerance means deviations are kept within one micrometre, giving a clear rational advantage for quality assurance and process stability. Robust design tailored to workshop conditions Built as a workshop version from special steel, the component balances hardness and wear resistance to withstand frequent insertion cycles. The compact 50 mm length maintains rigidity while remaining easy to handle, and the small mass supports quick positioning without disturbing delicate assemblies. This construction reduces downtime for replacements and supports continuous, efficient inspection routines in the workshop environment. Practical handling and traceable logistics At just 4 g, the pin is lightweight and simple to integrate into existing gauge sets or fixtures. Delivery in a protective transport case preserves the measuring face during storage and transit, cutting the risk of accidental damage that would affect measurement certainty. The concise form factor eases manual handling and minimises the impact on measuring jigs where space is limited. Typical applications and compatibility Engineered for end‑dimension measurement, the pin is suitable for verification of drilled holes, alignment checks and small‑component control in precision engineering and toolmaking. Its workshop rating and material choice make it compatible with regular inspection workflows and pin‑based measurement systems, providing a dependable reference for repeatable checks and process documentation. Contact Metav Werkzeuge for delivery options, technical matching and supply of the M323.158 gauge pin for workshop measurement tasks Technical data Article number: M323.158 GTIN: 4061905054716 Material: Special steel Length: 50 mm Diameter: 1.58 mm Tolerance: ±0.001 mm Weight: 0.004 kg Facts Length: 50 mm Diameter: 1.58 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop version Supplied in protective transport case Intended for end‑dimension checks Category: Gauge pin FAQ What is the dimensional tolerance of this gauge pin? The gauge pin M323.158 from Metav IndustryLine is manufactured to a tolerance of ±0.001 mm for high‑precision inspection work. Which material is used for the pin and is it suitable for regular workshop use? This Metav IndustryLine gauge pin is made from special steel and is specified as a workshop‑grade version, making it suitable for frequent use in production inspection. How long is the pin and how does that influence handling? The inspection pin measures 50 mm in length; this compact dimension keeps the pin rigid and easy to handle in confined measuring setups. Is the product supplied with protective packaging? Yes, the M323.158 gauge pin is supplied in a protective transport case to preserve measurement faces during storage and transport. For which inspection tasks is this pin typically used? The pin is intended for end‑dimension and hole‑verification tasks, including go/no‑go checks and alignment inspections in precision engineering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.59mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micron repeatability, compact form factor and industrial special steel for dependable end‑measurements and repeatable inspection flows. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.159 Gauge pin — 1.59 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The M323.159 is a single gauge pin engineered for precision end‑measurements and inspection tasks in workshop and metrology environments. High-precision tolerance ±0.001 mm Nominal diameter 1.59 mm Length 50 mm for stable probing Hardened special steel construction Workshop-grade single gauge pin Reliable dimensional control with sub‑micron tolerance A compact precision pin with a confirmed tolerance of ±0.001 mm provides a clear rational advantage where tight fits and small clearances are critical. The numeric specification translates into reduced rework and fewer measurement-related stoppages because the pin delivers consistent reference points for gauges, fixtures and manual checks. Where repeatability matters, the 1.59 mm nominal diameter and tight tolerance allow precise verification of bores, pins and mating features without the ambiguity that looser gauges can introduce. Space-saving probe for fine mechanics and inspection benches The short 50 mm length balances handling stability with the compactness needed on crowded inspection benches or in fine‑mechanical assembly jigs. This design reduces bending moment during probing, improving positional stability and measurement reliability compared with longer probes used in ad‑hoc checks. The small footprint also makes the component suitable for nested fixture layouts and micro‑assembly stations where every millimetre of clearance matters. Durable material and workshop‑ready handling Manufactured from special steel and finished for workshop use, the pin withstands repeated seating and withdrawal in inspection routines. The material choice enhances wear resistance, keeping the diameter consistent over many cycles and extending the service interval before replacement is necessary. As a single gauge element, it is straightforward to integrate into existing plug gauges, verification fixtures or manual inspection sequences, providing a durable datum that supports efficient quality control. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine gauge pin into inspection fixtures; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.159 GTIN: 4061905054723 Description: Gauge pin, single, 1.59 mm, ±0.001 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 1.59 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg eClass: 21170231 Special features Material: Special steel Version: Workshop execution Single-piece gauge pin Intended use: End measurements and inspection tasks FAQ What level of accuracy can be expected from this gauge pin? The M323.159 gauge pin delivers a stated tolerance of ±0.001 mm, making it suitable for high‑precision verification and tight‑fit assessments in inspection workflows. Is the pin suitable for use in small‑bore verification fixtures? Yes; with a nominal diameter of 1.59 mm and compact length, this single gauge pin is intended for small‑bore checks and can be mounted in verification fixtures or plug gauges. How does the material affect long‑term measurement stability? Constructed from special steel, the pin resists wear and maintains diameter integrity over many cycles, supporting stable reference measurements in workshop environments. Can the gauge pin be integrated into existing manual inspection rigs? The single‑piece design of the M323.159 allows straightforward integration into manual rigs, plug gauges and jigs where a precise datum or end‑stop is required. What inspection tasks is this product optimised for? This workshop‑grade gauge pin is optimised for end‑measurements, go/no‑go checks and positional verification of small mechanical components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the high measurement precision (±0.001 mm) combined with a compact 1.50 mm diameter and a 50 mm overall length for reliable end‑dimension checks; the workshop‑grade design and transport case protect the pin in daily use. Order the inspection pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.150 – 1.50 mm diameter, ±0.001 mm accuracy The Test pin M323.150 is a single precision inspection pin designed for end‑dimension checks and gauging tasks in workshop metrology. Precision tolerance ±0.001 mm 1.50 mm diameter, special steel 50 mm length for end‑dimension checks Workshop version supplied in transport case Consistent results through defined accuracy A tolerance of ±0.001 mm provides a measurable advantage where repeatability matters: production checks remain comparable shift to shift, and sampling routines catch deviations early. The fine tolerance reduces uncertainty in pass/fail decisions and supports inline quality control, so fewer components require rework. By specifying a narrow error band, testing routines become a reliable part of process control rather than a source of doubt. Durable materials and workshop readiness Manufactured from special steel and offered as a workshop version, the inspection pin is built to withstand frequent handling without rapid wear. The 50 mm overall length gives secure engagement in fixture plates and gauge blocks while keeping the probe compact for tight assemblies. Supplied in a protective transport case, the pin arrives ready for storage or immediate deployment on the shop floor, minimising the risk of damage during transit and maintaining the defined geometry that underpins measurement confidence. Practical applications and integration into workflows The inspection pin is ideal for end‑dimension verification, fixture alignment and repeatable gauging operations in metalworking and precision assembly. Its compact 1.50 mm diameter permits access into narrow bores and fine features, making it suitable for both prototyping and production checks. When paired with stable fixturing and calibrated reference standards, the pin supports fast go/no‑go assessments and simplifies integration into existing inspection jigs. Metav’s focus on accessible precision ensures that this pin complements a broader toolkit for effective quality assurance. For production‑critical gauging, choose the Metav IndustryLine M323.150 inspection pin for its proven accuracy and robust workshop design; contact Metav Werkzeuge in Emmerich to confirm stock and logistical details. Technical data Article number: M323.150 GTIN: 4061905054631 Label: Test pin, single, 1.50 mm, ±0.001 mm, length 50 mm Core figures Diameter: 1.50 mm Measuring range: 1.5 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Workshop version Packaging: transport case Eclass: 21170231 Category: Measuring pins FAQ What tolerance does the inspection pin offer? The M323.150 inspection pin is manufactured to a tolerance of ±0.001 mm, suitable for high‑precision end‑dimension checks. Which materials is the pin suitable for? The M323.150 is made from special steel and is intended for mechanical gauging tasks; compatibility with specific workpiece materials depends on the intended measurement setup and mating components. Is the pin delivered ready for workshop use? Yes, the item is supplied as a workshop version and delivered in a protective transport case to reduce handling damage and keep the pin geometry intact. Can the pin be used for fixture alignment and gauging? The slim 1.50 mm diameter and 50 mm length make the pin appropriate for fixture alignment, go/no‑go checks and repeatable gauging in production environments. How should the inspection pin be maintained? Keep the pin clean and dry, protect from mechanical shock, and store it in its case when not in use; periodic inspection for wear will help maintain measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.61mm Gauge Pin Length 50mm ±0.001 mm, Workshop Version - Metav IndustryLine
Achieve reproducible reference measurements with the combination of micron-level tolerance, compact 50 mm length and durable special steel construction. Benefit from secure transport storage and workshop-ready design. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.161 — single precision gauge pin, 1.61 mm, ±0.001 mm (Metav IndustryLine) The Gauge pin M323.161 is a single, high-precision test pin designed for reference measurements and bore inspection in workshop metrology. *±0.001 mm tolerance for reference checks *Special steel core for long-term stability *Supplied in transport case for secure storage Consistent, micrometre-level reference for inspection The M323.161 gauge pin provides a ±0.001 mm tolerance, equivalent to 1 µm, making it suitable for demanding reference and inspection tasks where repeatability is essential. With a nominal diameter of 1.61 mm and a length of 50 mm, the pin serves as a reliable datum for small-bore verification, plug-gauge comparison and assembly clearance checks. The extremely small diameter and tight tolerance minimise fit variation, enabling precise verification of end measures and guaranteeing consistent pass/fail decisions in quality control. Robust workshop design that protects accuracy Manufactured from special steel, this test pin balances hardness and dimensional stability to withstand routine handling in a production environment. The compact mass (approx. 0.004 kg) reduces inertia during handling and lowers the risk of accidental deformation. Delivery in a protective transport case ensures the pin arrives free from nicks or contamination, preserving calibration and surface integrity. The workshop specification reflects practical durability without compromising the minute dimensional accuracy required for precision metrology. Integrates into inspection workflows and tooling sets As a single gauge pin, the component is intended for use in gauge sets, checking fixtures and direct bore inspection. It is especially useful for end-measure verification and final inspection steps where a stable, traceable reference is required. Its form and finish support smooth insertion into small bores and tight fits, while the compact geometry fits into existing plug-gauge routines or bespoke test assemblies. The combination of micron tolerance and workshop-ready protection streamlines quality processes and reduces rework from ambiguous measurements. For micron-accurate reference checks and workshop integration, contact Metav Werkzeuge to obtain the Metav IndustryLine M323.161 or request tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.161 GTIN: 4061905055300 Manufacturer: Metav IndustryLine Facts Diameter: 1.61 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop version Material: Special steel Supplied in transport case Single gauge pin for bore and fit checks FAQ What tolerance does the gauge pin offer? The M323.161 gauge pin is specified to ±0.001 mm, providing micrometre-level precision for reference and inspection tasks. Is the pin suitable for small-bore verification? Yes; the 1.61 mm diameter and 50 mm length make the pin appropriate for checking small bores, plug-gauge comparisons and fit verifications. How is the pin protected during transport? The test pin is supplied in a protective transport case to prevent damage and contamination during storage and transit. What material is the gauge pin made from? The pin is manufactured from special steel, chosen for dimensional stability and resistance to routine workshop wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.62mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of a compact precision tool that combines 1.62 mm diameter, ±0.001 mm accuracy and a robust 50 mm length for consistent end‑dimension checks; the workshop version and protective transport case ensure repeatable results on the shop floor. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.162 Gauge pin — single precision test pin, 1.62 mm ±0.001 mm, 50 mm length (Metav IndustryLine) A M323.162 gauge pin designed for high‑precision fit and end‑dimension checks in workshop metrology applications Workshop version for rugged use Precision diameter 1.62 mm ±0.001 mm Durable special steel construction Supplied in protective transport case Accurate small‑diameter inspection for fine components The compact design delivers repeatable results when measuring small bores and mating parts. With a 1.62 mm nominal diameter and a tight ±0.001 mm tolerance, this test pin sits in the micro class of gauge tools where minimal dimensional deviation is critical. The short, 50 mm length keeps the pin stiff and easy to handle, reducing the influence of bending or misalignment during manual checks. Constructed from special steel, the pin resists wear in frequent use, supporting consistent go/no‑go assessments and first‑pass quality control. Streamlined workshop use and reduced rework Optimised for everyday inspection tasks, the tool's workshop execution balances durability with handling ease. The gauge pin is suitable for checking bores, verifying assembly fits and confirming end‑dimensions on small components, which helps keep production flow smooth and rework to a minimum. Supplied in a protective transport case, the pin remains protected between uses, preserving the critical surface finish that underpins the stated tolerance and prolonging service life in a busy shop environment. Practical handling, integration and measurement context At 0.004 kg and 50 mm long, the pin is light enough for quick manual checks yet long enough to reach slightly recessed features. The ±0.001 mm specification positions the instrument for high‑precision manual gauging tasks; this level of deviation is routinely relied on in fine mechanical assembly and precision inspection. For integration into existing routines, the pin functions as a stable reference for go/no‑go comparisons and complements bench gauges or optical systems where a compact, high‑accuracy probe is required. For reliable small‑bore verification and workshop resilience, order the M323.162 gauge pin from Metav Werkzeuge — contact our specialists in Emmerich for specific application advice and availability. Technical data Article number: M323.162 GTIN: 4061905055317 Label: Gauge pin, single, 1.62 mm, ±0.001 mm, length 50 mm Material: Special steel Version: Workshop execution Core measurements Diameter: 1.62 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Supplied in protective transport case Designed for end‑dimension checks Robust finish for frequent workshop use FAQ What tolerance does the M323.162 offer? The M323.162 gauge pin is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision fit checks. Which materials is the M323.162 suitable for inspecting? The M323.162 gauge pin, produced in special steel, is intended for use on common metallic workpieces and for checking bore diameters and mating features in metal components. How is the M323.162 packaged for transport? The M323.162 is supplied in a protective transport case, ensuring the pin retains its surface condition and dimensional integrity during storage and transport. What length and weight does the M323.162 have? The M323.162 has a length of 50 mm and a mass of 0.004 kg, offering a balance between reach and rigidity for manual inspection. Which brand manufactures the M323.162 gauge pin? The M323.162 is part of the Metav IndustryLine range and is identified by SKU M323.162 for straightforward ordering and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.63mm Gauge Pin Precision ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
The compact design and ±0.001 mm repeatability make this inspection pin ideal for precise end‑measure checks and repeatable locating tasks; combined with special steel for durable contact surfaces, it supports reliable series inspection. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.163 — single 1.63 mm inspection pin, ±0.001 mm, 50 mm The gauge pin M323.163 is a workshop‑grade inspection pin intended for end‑measure verification and fixture locating in metalworking and assembly environments. Workshop-grade precision variant Diameter 1.63 mm tolerance ±0.001 mm Length 50 mm for end-measure checks Special steel for wear resistance Reliable precision for repeatable inspections A narrow diameter with a tolerance of ±0.001 mm provides the high level of accuracy required for go/no‑go verification and reference measurements in small components. The 1.63 mm nominal size is suitable where compact locating elements are needed; the tight tolerance reduces measurement scatter and increases repeatability when used in series checks or mating with hardened bushings. For quality assurance routines, the predictable geometric behaviour of the pin minimises rework and supports consistent pass/fail decisions. Robust workshop construction that reduces maintenance Manufactured in special steel and finished for contact durability, this workshop‑version inspection pin withstands frequent insertion and contact without rapid surface degradation. The material choice balances hardness and resistance to wear, so locating accuracy is retained over many cycles and tool changes. The design focus on solidity rather than delicate laboratory finishes makes the component suitable for daily use in production jigs, gauges and simple test fixtures where downtime must be kept to a minimum. Compact format for versatile fixturing and end‑measure tasks With a length of 50 mm, the pin provides sufficient engagement for end‑measure tasks and positioning while remaining easy to handle within tight assemblies. Its modest mass and slim profile suit confined fixture layouts and allow close packing in multi‑pin arrangements. The pin performs well as a reference element for small parts, alignment aids or temporary locating, and integrates seamlessly into existing inspection stations without the need for specialised adaptors. Choose the Metav IndustryLine gauge pin for dependable micro‑locating performance — contact Metav Werkzeuge GmbH in Emmerich for procurement or technical advice. Technical data SKU: M323.163 GTIN: 4061905055324 Product: Single gauge pin, workshop version Dimensions & accuracy Diameter: 1.63 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Materials & features Material: Special steel Workshop-grade execution Suitable for end-measure and locating applications FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.001 mm, ensuring tight dimensional control for fine inspection tasks. Is this pin suitable for repeated fixture use? Yes; the special steel construction and workshop execution make the pin suitable for repeated insertion and locating duties in production fixtures. Which applications is the pin intended for? Typical uses include end‑measure verification, positioning in jigs and simple go/no‑go checks for small components. How is the product identified for ordering? Order reference is SKU M323.163 and GTIN 4061905055324 for clear identification in procurement and stock systems. Can the pin be used alongside hardened bushings and gauges? The compact 1.63 mm diameter and durable finish make it compatible with common locating bushings and fixture arrangements for small parts. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.64mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Precision for end-dimension checks is delivered through the combination of a tight ±0.001 mm tolerance and a special steel construction in a compact 50 mm format; this ensures reproducible results and robust workshop handling. Order the gauge pin directly via Metav Werkzeuge or consult our advisers for guidance on integration into inspection routines. Gauge pin, single — 1.64 mm, ±0.001 mm (50 mm length) | Metav IndustryLine The Gauge pin, single, 1.64 mm ±0.001 mm, 50 mm length is a workshop-grade precision test pin designed for end-dimension verification and fine-component measurement. Workshop-grade construction Diameter 1.64 mm ±0.001 mm tolerance 50 mm length with protective transport case Accuracy that secures repeatable results The gauge pin offers a ±0.001 mm dimensional tolerance, a specification that positions it for tasks where micrometre-level consistency matters. Such tolerance reduces measurement uncertainty when verifying end dimensions and ensures repeatability across multiple checks. For production and inspection environments this translates into fewer rejects, clearer go/no‑go decisions and faster validation cycles; the verified tolerance supports documented quality control without elaborate auxiliary equipment. Compact format for fine mechanical and assembly work With a diameter of 1.64 mm and a 50 mm overall length, this test pin belongs to the micro range of measuring tools and is optimised for fine mechanical assemblies and delicate components. The small form factor allows precise placement in narrow bores or against small faces while remaining easy to guide by hand or with simple fixtures. The compact design therefore combines accessibility with stiffness, making it suitable for watchmaking, miniature tooling and end‑dimension sampling where space and control are limiting factors. Robust material and workshop suitability Constructed from special steel, the pin balances wear resistance with dimensional stability under normal workshop conditions. The workshop-grade finish resists minor knocks and routine handling, which helps retain the tight tolerance over time. Delivery includes a protective transport case, preserving the measuring surface during storage and transit and reducing the risk of nicks that would compromise accuracy. The low mass and compact geometry also permit quick manual checks without adding measurement instability. Practical use in inspection and production workflows The pin functions as a straightforward reference for end‑dimension verification and can be used alongside gauge blocks, optical comparators or simple fixture checks. Its small profile suits spot checks, first‑piece inspections and periodic sampling to confirm machining accuracy. By choosing a dedicated measuring pin with the stated tolerance, inspection routines gain clarity: fewer ambiguous results, faster pass/fail decisions and improved traceability for documented quality checks. Integration into existing workflows is simple and yields measurable process reliability. For workshop-ready, high-precision end-dimension verification request the Metav IndustryLine gauge pin through Metav Werkzeuge GmbH in Emmerich for tailored advice and reliable supply Technical data Article number: M323.164 GTIN: 4061905055782 Manufacturer: Metav IndustryLine Core specifications Diameter: 1.64 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Maximum measuring range: 1.64 mm Special features Material: special steel Workshop execution (workshop-grade) Protective transport case included Intended use: end-dimension verification Category: Gauge pins FAQ What tolerance does this gauge pin provide? The gauge pin M323.164 is specified with a tolerance of ±0.001 mm, suitable for micrometre‑level end-dimension checks. Is the pin suitable for fine mechanical work such as watchmaking? Yes, the compact diameter and 50 mm length place this pin in the micro range, making it well suited to watchmaking and other fine‑component applications. Which material is used for the test pin? The pin is manufactured from special steel, selected for dimensional stability and resistance to routine workshop wear. Is a protective case supplied with the pin? Delivery includes a protective transport case to preserve the measuring surface during transport and storage. How is the pin typically employed in inspection routines? The pin is used for end-dimension verification and spot checks, often together with gauge blocks or simple fixtures to confirm component tolerances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.65mm Gauge Pin Length 50mm ±0.001mm Workshop Version, Special Steel IP20 - Metav IndustryLine
The compact combination of high repeatability and minimal form factor makes this gauge pin a reliable choice for pinpoint end‑measure checks; its ±0.001 mm tolerance and 1.65 mm diameter ensure consistent inspection results. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge Pin M323.165 – 1.65 mm, ±0.001 mm (50 mm length) by Metav IndustryLine The Gauge Pin M323.165 is a precision inspection pin designed for fine gauging and end‑measure verification in workshop and small‑parts quality control. ±0.001 mm tolerance for high precision 1.65 mm diameter for fine gauging 50 mm length for secure handling Workshop‑grade construction Precision that secures measurement decisions The core advantage of this inspection pin is its ±0.001 mm declared accuracy, which translates into reproducible checks for critical fits and end dimensions. Specified tolerance values indicate the maximum deviation allowed during production and inspection, so using such a gauge pin reduces uncertainty when validating bores, pin fits or mating features. The 1.65 mm diameter is suited to fine detail work where larger pins would disturb the datum; the small cross‑section supports accurate seating without altering the part geometry. Robust form and straightforward handling for workshop use Manufactured from special steel, the pin balances stiffness and wear resistance for repetitive use in an industrial setting. The 50 mm overall length provides a comfortable gripping area while keeping the functional section clear for measurement tasks. As a workshop‑grade item, this pin is intended for regular inspection cycles and production sampling, delivering the mechanical stability needed for frequent contact‑based checks without excessive handling complexity. Typical applications and procurement guidance This inspection pin is primarily used for end‑measure verification, pin‑gauge checks and fine assembly control in metalworking and precision engineering. For traceable quality processes, reference to the declared tolerance and material ensures compatibility with standard inspection routines. If clarification is required about fit classes or integration into a gauging set, the Gauge Pin M323.165 from Metav IndustryLine can be specified as a component in fixture lists or incoming inspection kits — Metav consultants are available to advise on selection and set composition. Choose Metav IndustryLine gauge pins for consistent micro‑gauging accuracy and contact Metav Werkzeuge for tailored advice and procurement: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M323.165 GTIN: 4061905055799 Manufacturer: Metav IndustryLine Core specifications Diameter: 1.65 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Materials & features Material: special steel Version: workshop execution Category: gauge pin Intended use: end‑measure verification FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.165 is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision inspection tasks in workshop and production environments. Which materials is the pin suitable for checking? As a dimensional inspection tool, the M323.165 gauge pin is used to verify geometries of components made from metals and other rigid materials where a 1.65 mm reference is required. Is the pin part of a calibrated set? Calibration status is not implied by the product data; calibration options and certificates can be arranged separately on request for the M323.165 to meet specific quality‑assurance requirements. How does the 50 mm length affect handling? The 50 mm overall length gives sufficient grip for manual use while keeping the measuring section accessible, improving handling during repetitive inspection routines. Can the M323.165 be used in assembly fixtures? Yes, the compact diameter and precise tolerance of this gauge pin make it suitable as a reference element in assembly jigs and verification fixtures for small components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.66mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Order a combination of workshop-grade robustness and sub-micron accuracy: the probe pin delivers ±0.001 mm tolerance on a 1.66 mm nominal diameter with a 50 mm usable length, ensuring consistent end‑dimension checks. Secure procurement directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Pin M323.166 — single probe pin, 1.66 mm, ±0.001 mm (50 mm) The Gauge Pin M323.166 is a workshop-grade precision probe intended for end‑dimension verification and repeatable checking tasks in quality control and inspection. ±0.001 mm tolerance 1.66 mm nominal diameter 50 mm usable length Workshop-grade special steel Precision that reduces rework and inspection uncertainty This probe pin is engineered for tight dimensional control: with a ±0.001 mm positional tolerance on a 1.66 mm nominal diameter and a 50 mm shaft length, the component supports reliable end‑dimension checks where small deviations matter. The high mechanical stability of the shaft reduces bending and measurement scatter, translating into fewer false rejects and less rework. The special steel construction maintains form under repeated contact, extending service life and lowering the total cost of inspection per measurement. Stable handling for repetitive QC routines A workshop-focused design keeps handling straightforward while preserving measurement integrity. At just 0.004 kg, the pin is easy to manoeuvre in fixture systems and gauges, but remains stiff enough for repeatable contact. The result is high repeatability between measurements and operators, which is essential for statistical process control and batch acceptance testing. This stability supports faster inspection cycles and a clearer view of process capability without complex fixturing. Simple integration into gauge sets and test fixtures The single‑unit supply is suited to retrofitting existing gauge plates or building dedicated probe assemblies. The compact geometry of the shaft and the standardised diameter enable compatibility with common gauge housings and receiving holes, simplifying procurement and logistics. Documentation-friendly identification (SKU and GTIN) eases inventory management and traceability within inspection systems, helping to maintain auditable measurement records for production runs. Confidence through brand and quality filtering Sourced under the Metav IndustryLine, this probe pin benefits from Metav’s role as a quality filter for the European market. The supplier’s emphasis on accessible precision means dependable stock levels and consistent product standards for industrial and workshop customers. Where traceability and supplier reliability affect production planning, a proven supply partner reduces procurement risk and supports continuous measurement quality across the shop floor. Contact Metav Werkzeuge to reserve the Metav IndustryLine M323.166 for precise end‑dimension verification or to request tailored application guidance from our consultants Technical data SKU: M323.166 GTIN: 4061905055805 Article description: Gauge pin, single, 1.66 mm, ±0.001 mm, length 50 mm Core specifications Nominal diameter: 1.66 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Materials & features Material: special steel Workshop execution Single unit supply Application: end‑dimension checks FAQ What is the intended application for this probe pin? The probe pin M323.166 is intended for end‑dimension checks and repeatable verification tasks within inspection fixtures and gauge sets. How precise is the gauge pin and what does that mean for production control? With a tolerance of ±0.001 mm, the pin provides sub‑micron positional control that reduces uncertainty in critical dimension inspections and supports tighter process control. Is the material suitable for frequent contact use? Yes, the pin is manufactured from special steel designed for workshop use, offering durability under repeated contact and stable dimensional performance. Can this pin be used with existing gauge housings? The standardised 1.66 mm nominal diameter and compact geometry make the pin compatible with common receiving holes and gauge housings for straightforward integration. Which identifiers support traceability and ordering? Order and inventory control can use the SKU M323.166 and GTIN 4061905055805 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.67mm Test Pin Single ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, 1.67 mm nominal diameter and a compact 50 mm length to ensure reproducible end‑size checks in workshop environments; supplied as a single workshop‑grade gauge pin and delivered in a protective case, order via Metav Werkzeuge or consult our advisors for specification support. M323.167 gauge pin — 1.67 mm diameter, ±0.001 mm precision (Metav IndustryLine) The M323.167 gauge pin is a workshop‑grade precision test pin designed for reliable end‑size checking, plug‑gauge tasks and small‑bore inspection in machining and quality control. Workshop version for industrial use Tight tolerance ±0.001 mm Diameter 1.67 mm, length 50 mm Delivered in protective case Precise measurement where repeatability matters A compact gauge pin with a ±0.001 mm tolerance provides the dimensional certainty required for end‑size verification and go/no‑go plug testing. The small nominal diameter of 1.67 mm and a rigid 50 mm shank reduce flex and improve repeatability in confined bores or small assemblies. Constructed from special steel, the pin resists wear under frequent probing and maintains its form for consistent contact geometry. For production routines and incoming inspection, the combination of tight tolerance and robust material minimises rework and inspection variance, improving throughput in repetitive checks. Robust workshop design for dependable handling Designed as a workshop execution part, this single test pin suits bench inspection and fixture‑based checks. The hardened working surface and slim profile enable access to narrow features without compromising stiffness. Supplied individually and protected in a transport case, the pin is ready for storage and safe transport between workstations. The straightforward geometry makes the component compatible with manual gauges, fixture seats and simple plug‑gage assemblies, reducing setup time and lowering the risk of measurement error during routine quality procedures. Practical benefits for inspection workflows Integrating a high‑precision pin such as this into inspection routines streamlines decision‑making: clear pass/fail outcomes are delivered by mechanical fits or tactile gauges rather than subjective visual checks. The M323.167 from the Metav IndustryLine supports rapid verification of bore sizes and component ends, helping to avoid production bottlenecks. Its narrow diameter and precise tolerance are particularly useful for small‑part suppliers, toolrooms and maintenance teams who require compact, repeatable measurement tools that fit into existing control processes without complex fixtures. Contact Metav Werkzeuge for specification advice and local supply of the Metav IndustryLine M323.167 gauge pin, available from our Emmerich warehouse and ready for immediate dispatch or technical consultation Technical data SKU: M323.167 GTIN: 4061905055812 Weight: 0.004 kg Material: Special steel Type: Single gauge pin Facts Diameter: 1.67 mm Length: 50 mm Tolerance: ±0.001 mm Special features Workshop version Delivered in protective case Intended for end‑size checking Single item delivery FAQ What nominal diameter does the gauge pin have? The gauge pin has a nominal diameter of 1.67 mm and is supplied as the single item SKU M323.167 for targeted inspections. How tight is the tolerance on the pin? The pin is manufactured to a tolerance of ±0.001 mm, providing high repeatability for go/no‑go and end‑size checks. What material is used for the pin? The pin is made from special steel, chosen for wear resistance and dimensional stability in workshop conditions. Is the pin suitable for small‑bore inspections? Yes, the compact 1.67 mm diameter and 50 mm length make it ideal for narrow bores and confined geometries in routine inspection. How is the pin delivered and stored? The gauge pin is supplied individually and packed in a protective transport case to preserve the working surface during storage and transfer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.68mm Gauge Pin, ±0.001mm Accuracy, Length 50mm, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of razor‑sharp repeatability and compact handling: the gauge pin delivers 1.68 mm diameter accuracy with a tight ±0.001 mm tolerance and a robust 50 mm length for reliable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or consult the technical team for application support. Gauge Pin M323.168 — Single 1.68 mm Ø, ±0.001 mm, 50 mm (Metav IndustryLine) The Gauge Pin M323.168 is a workshop‑grade test pin designed for precise end‑measurement, alignment and go/no‑go verification in inspection and assembly workflows. Diameter 1.68 mm precision ground Tolerance ±0.001 mm for high repeatability Length 50 mm workshop specification Supplied in transport case for protection Precision where it makes the difference The gauge pin is manufactured for high‑precision inspection tasks and provides a repeatable reference thanks to its ±0.001 mm specification. A tolerance at this level allows for consistent end‑dimension verification in small‑part production and quality control, reducing rework and inspection time. The hardened, ground diameter of 1.68 mm ensures stable contact with gauge bores and fixtures, supporting quicker decisions on part conformity and enabling tighter process control. Built for workshop durability and easy handling Designed as a workshop version, the test pin combines compact geometry with a corrosion‑resistant special steel finish, giving a balance of wear resistance and dimensional stability during regular use. The 50 mm length offers sufficient reach for many fixture and assembly checks while remaining easy to manoeuvre by hand or in test rigs. Each pin is supplied in a protective transport case, limiting the risk of damage in storage and transit and helping maintain the reference condition between uses. Seamless integration into inspection routines As a single gauge pin for end‑measure and alignment tasks, this test pin suits applications such as bore checking, pin‑fit verification and fixture calibration where small diameters are critical. The product supports quick manual checks and can be incorporated into bench gages or automated fixtures where compact, high‑accuracy references are required. For practical queries on using the gauge pin in specific measurement chains or for compatibility with existing jigs, Metav’s technical advisers can provide targeted recommendations via info@metav-werkzeuge.com or by telephone at +49 2822 7131930. For dependable small‑diameter references choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for tailored guidance and fast supply from Emmerich Technical data Article number: M323.168 GTIN: 4061905055829 ECLASS: 21170231 Data Diameter: 1.68 mm Length: 50 mm Tolerance/Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Workshop version Supplied in transport case Category: Gauge pins (Messstifte) FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.168 is specified with an accuracy of ±0.001 mm, making it suitable for fine inspection and tight tolerance checks. Which material is used for the pin and what does that mean for durability? The test pin is made from special steel, chosen for dimensional stability and wear resistance in workshop environments. Is the pin delivered protected for transport and storage? Yes, the gauge pin is supplied in a protective transport case to reduce the risk of damage and help preserve its reference condition. Can this pin be used for bore and pin‑fit verification in fixtures? The 1.68 mm diameter and 50 mm length make the pin appropriate for bore checks, pin‑fit tests and fixture alignment in small‑part assemblies. How can measurement teams get advice on integrating this pin into existing procedures? Metav’s technical team can advise on application and setup; contact via info@metav-werkzeuge.com or call +49 2822 7131930 for detailed guidance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.69mm Testing Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high-precision tolerance (±0.001 mm), robust special-steel construction and a compact 50 mm length to ensure reliable end-measurements in inspection stations and gauges; order the test pin directly via Metav Werkzeuge or consult the specialists for application advice. Test pin M323.169 — 1.69 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) A Test pin M323.169 for precision inspection and gauge use in metrology and quality control environments. High-precision diameter ±0.001 mm Hardened special-steel construction 50 mm overall length for deep measurements Precision where dimensional certainty is required The probe offers a diameter of 1.69 mm with a verified tolerance of ±0.001 mm, positioning it in the high-precision class for small-diameter inspection pins. Such accuracy reduces measurement uncertainty when checking end dimensions or reference fits in gauges and fixtures. The tight tolerance is particularly valuable in final inspection, where repeatable results and traceable pass/fail decisions are required. This precision supports efficient quality control and reduces rework rates. Built to withstand workshop conditions Manufactured from special steel, the pin combines wear resistance with dimensional stability for repetitive use in workshop and production environments. The 50 mm length gives access into deeper holes and recessed features while remaining rigid enough to avoid deflection in typical inspection setups. The item is supplied as a single unit and is delivered in a protective transport case, which safeguards the pin during storage and transit and keeps handling effects to a minimum. Practical integration into inspection workflows Designed for gauge, fixture and hand-held inspection applications, the probe pin suits both serial inspection and sample checks. Its compact form makes it straightforward to install in custom fixtures or to use with bench-mounted measuring assemblies. The construction supports consistent contact with measured surfaces, ensuring reliable end-measurements and simplifying the interpretation of results during production control and incoming inspection. Contact Metav Werkzeuge for application guidance, availability details and to discuss integration of the M323.169 into existing inspection equipment Technical data Article number: M323.169 GTIN: 4061905055836 SKU: M323.169 Category: Test pins Workshop version: yes Diameter: 1.69 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.004 kg Material: special steel Supplied in protective plastic or wooden transport case Single-piece supply Intended use: end measurement, inspection, gauge applications Feature: workshop execution FAQ What level of accuracy can be expected from this test pin? The test pin is manufactured to an accuracy of ±0.001 mm, making the M323.169 suitable for high-precision inspection tasks and tight-tolerance checks. Is the pin suitable for use in gauge fixtures and press-in inserts? Yes, the probe pin’s special-steel construction and 50 mm length make it appropriate for installation in gauge fixtures and similar inspection assemblies. How is the product packaged for transport? The item is supplied as a single pin and delivered in a protective transport case (plastic or wooden as appropriate) to prevent damage during transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.6mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometre-level accuracy (±0.001 mm), a compact 1.60 mm diameter, and a robust 50 mm length for repeatable inspection results; order directly via Metav Werkzeuge or consult our specialists for application advice. M323.160 Gauge pin — 1.60 mm Ø, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.160 gauge pin is a precision inspection pin designed for fine metrology tasks and end‑measurement checks in workshop and laboratory quality control. Diameter 1.60 mm ±0.001 mm tolerance 50 mm hardened length for stable contact Special steel for wear resistance Workshop version for everyday use Precise tolerances that speed up quality checks The extremely fine ±0.001 mm tolerance of this inspection pin delivers a measurable advantage when precision is critical. Such accuracy reduces ambiguity in go/no‑go assessments and aids consistent pass/fail decisions during incoming inspection and shop‑floor checks. The small 1.60 mm diameter suits fine bores and small features where larger gauges would be impractical. By using a dedicated inspection pin with defined tolerance, measurement variability is minimised and traceability of results is improved, which supports faster decision‑making in production and incoming goods control. Durable workshop design for repeatable contact Built as a workshop version, the pin combines practical robustness with dimensional integrity. The shaft is made from special steel, providing resistance to wear and ensuring a stable contact surface over many cycles. The 50 mm length offers sufficient reach for recessed features while maintaining rigidity during handling. This balance of length and material choice helps keep deformation low and repeatability high, so routine checks remain reliable without unnecessary rework or adjustments to fixtures. Simple integration into measurement routines The compact geometry of the pin allows easy use with bench indicators, height gauges and dedicated gauge holders; it also fits into small inspection fixtures where precise end‑measures are required. Readings obtained with this inspection pin integrate smoothly into standard quality documentation and control plans. Clear, verifiable specifications such as diameter, length and tolerance make it straightforward to include the pin in measurement protocols and calibration schedules, supporting consistent quality outcomes across shifts. For reliable micron‑level inspection choose the Metav IndustryLine M323.160 gauge pin — contact Metav Werkzeuge for order and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.160 GTIN: 4061905055294 Weight: 0.004 kg Length: 50 mm Diameter: 1.60 mm Accuracy: ±0.001 mm Facts Category: Gauge pin / inspection pin Brand: Metav IndustryLine Version: Workshop execution Label: Single gauge pin, 1.60 mm Special features Material: Special steel Intended use: End‑measure inspection and fine bore testing Application: Precision metrology and workshop quality control Packaging: Single item FAQ What measurement tolerance does this gauge pin offer? The M323.160 gauge pin is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision inspection tasks. Can the pin be used for small bore inspection? Yes, the 1.60 mm diameter is ideal for checking small bores, tight features and precision components where larger gauges cannot be applied. Which applications are best suited to this inspection pin? The pin is intended for workshop and laboratory quality control, end‑dimension checks and integration into inspection fixtures for go/no‑go assessments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.71mm Test Pin Single ±0.001mm Accuracy Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of submicron accuracy, robust workshop design and reliable material stability for repeatable end‑measure checks; order via Metav Werkzeuge or consult the technical team for application advice. Test pin M323.171 — precision test pin, Ø 1.71 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A test pin M323.171 engineered for high‑precision end‑measure checks and gauge setting in workshop and inspection environments. Diameter 1.71 mm, tolerance ±0.001 mm Length 50 mm, workshop grade construction Special steel for dimensional stability Repeatable accuracy for gauge and fixture validation The probe provides a diameter of 1.71 mm with a verified positional tolerance of ±0.001 mm, enabling reliable reference points in measuring rigs and plug gauges. Specified accuracy supports traceable assembly and calibration tasks where small deviations propagate into functional faults; the precise tolerance reduces measurement uncertainty and simplifies statistical process control. Compatibility with common fixture bores and standard gauge blocks ensures the component integrates cleanly into existing inspection chains. Robust material and form for workshop use Produced from special steel, the pin combines hardness with corrosion resistance to preserve contact geometry under repeated handling. The 50 mm length offers sufficient reach for end‑face and alignment checks while remaining stiff enough to avoid buckling in typical probe applications. The workshop execution is aimed at routine metrology tasks and jigs; surface finish and roundness are controlled to maintain consistent contact points during comparative measurements and during use with holding fixtures. Practical integration into quality workflows Marked by a compact design and a low mass, the component is suited for rapid inspection cycles and repeat measurements. The precise tolerance enables quicker Go/No‑Go assessments and reduces rework by catching deviations early in production. As a calibrated reference element it supports measurement reproducibility in production sampling plans and can be used alongside micrometres, dial indicators and height gauges to establish or check end‑measure standards. Traceability and identification for shopfloor control Unique identifiers such as the SKU and GTIN link the item to inspection records and inventory systems, aiding auditability and change control. Lightweight construction minimises accidental loading on delicate fixtures, while the controlled geometry lowers the risk of accumulative error when used as a reference pin. The workshop orientation of the product reflects a balance between everyday robustness and metrological performance required in small‑batch and serial production environments. Contact Metav Werkzeuge for procurement and application guidance on the M323.171 precision test pin — technical consultants are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to advise on integration into existing gauge systems Technical Data Article number: M323.171 GTIN: 4061905056604 Manufacturer: Metav IndustryLine Facts Diameter: 1.71 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Workshop execution Single test pin Category: Test pins / Messstifte FAQ What accuracy can be expected from this test pin? The M323.171 test pin is specified with a tolerance of ±0.001 mm, making it suitable for fine end‑measure checks and reference applications in inspection equipment. Which materials is the pin made from and how does that affect use? Manufactured from special steel, the pin offers dimensional stability and surface durability, supporting repeated contact without rapid degradation of the contact geometry. Is this test pin suitable for use with plug gauges and alignment fixtures? Yes; the dimensional specification and 50 mm length make the M323.171 appropriate for plug gauge checks, fixture alignment and related end‑measure tasks in workshop environments. How is the product identified for traceability and inventory purposes? The item is listed as SKU M323.171 with GTIN 4061905056604 to support traceability in quality systems and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.72mm Test Pin, ±0.001 mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied In Case - Metav IndustryLine
Take advantage of the pin's 1 µm accuracy, compact 50 mm length and workshop-grade construction for reliable end‑measurement routines; order directly via Metav Werkzeuge or consult our specialists if further advice is required. Test pin M323.172 — single precision gauge pin, 1.72 mm diameter, ±0.001 mm Test pin M323.172 designed for precise end measurements in inspection benches and fixture checks. Diameter 1.72 mm with ±0.001 mm accuracy 50 mm length, workshop execution Delivered in protective transport box Consistent accuracy for process control The pin provides a tolerance of ±0.001 mm, equivalent to 1 micrometre, which stabilises gauging routines and reduces measurement scatter in serial inspection. Such small form‑error limits are particularly beneficial when calibrating plug gauges, verifying end masses or checking positional features on delicate components. The narrow diameter of 1.72 mm paired with the stated tolerance supports high repeatability and makes the pin suitable for integration into measurement jigs or tactile probe checks where reproducible contact geometry is essential. Compact format for fine mechanical inspection With a 50 mm usable length in a compact workshop design, this pin fits tight fixtures and small assemblies without compromising rigidity. Classified as a micro‑sized test pin for fine mechanical work, it is optimised for applications such as micro‑machined parts, precision connectors and small bore verification. The transport‑safe packaging ensures the measuring face remains free of transport damage, preserving the pin’s calibrated geometry and extending service intervals—this is practical for quality departments that require ready‑to‑use, traceable inspection items. Robust material and traceability for daily use Manufactured from special steel in a workshop execution, the pin balances hardness and wear resistance for routine contact measurements while remaining light at approximately 0.004 kg. The concise design reduces handling errors during frequent use and supports quick changeover in bench fixtures. Identifiers such as SKU M323.172 and GTIN 4061905056611 aid inventory and documentation workflows, simplifying traceability in quality records and part lists. The product is intended for end‑measurement tasks and workshop inspection; handling and storage in the supplied transport box maintain surface integrity between uses. Choose Metav IndustryLine's Test pin M323.172 for dependable micro‑measurement tasks and contact Metav Werkzeuge in Emmerich for delivery details or purchasing guidance. Technical data Article number: M323.172 GTIN: 4061905056611 Material: Special steel Diameter: 1.72 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Version: Workshop execution Core data Diameter: 1.72 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg SKU: M323.172 Special features Delivered in protective transport box Designed for end measurements Compact format for small fixtures Category: Gauge/test pin FAQ What level of precision does the test pin offer? The test pin M323.172 achieves a tolerance of ±0.001 mm, delivering micrometre‑level precision suitable for high‑repeatability inspection tasks. Is the pin suitable for small bore or connector checks? Yes, the 1.72 mm diameter and 50 mm length make the pin appropriate for small bore verification and fine connector inspections in workshop environments. What material is used and how does that affect durability? Made from special steel, the pin balances hardness and wear resistance for frequent contact measurements while remaining light for easy handling. How is the product supplied to protect measurement faces? The pin is supplied in a protective transport box to prevent surface damage and to maintain the integrity of the measuring face during storage and transport. Can the pin be used in automated fixtures or probe testing? Its compact and rigid design allows integration into measurement jigs or probe checks where a consistent contact geometry is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.73mm Test Pin Length 50mm ±0.001 mm, Workshop Version, Special Steel in Case - Metav IndustryLine
Compact, workshop-ready precision for reliable end‑measure checks: the combination of 1.73 mm diameter, ±0.001 mm tolerance and a 50 mm working length ensures repeatable results and fewer rejects. Order via Metav Werkzeuge or consult our specialists for any technical questions. Pin gauge M323.173 — single inspection pin, 1.73 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Pin gauge M323.173 is a single, workshop‑grade inspection pin designed for precise end‑measure verification and reference checks in small‑part metrology. Workshop-grade precision pin Diameter 1.73 mm Tolerance ±0.001 mm Length 50 mm, special steel Consistent measurement confidence through tight tolerance A tolerance of ±0.001 mm places this tool in the high‑precision class for pin gauges, making it suitable where repeatability and minimal measurement uncertainty are critical. The very small 1.73 mm diameter, combined with the 50 mm shank, permits reliable end‑measurement and reference probing of bores, holes and mating features. By reducing dimensional dispersion at the inspection stage, the gauge contributes directly to lower scrap rates and fewer downstream corrections, which is a clear operational advantage in production and quality control processes. Robust workshop execution for everyday handling Built in a workshop execution and manufactured from special steel, the pin is dimensionally stable and resists wear under normal metrology handling. The compact form factor suits benchwork and jig checks, while the solid construction supports repeated insertions without rapid degradation of the measuring surface. This combination of durability and precise geometry preserves the gauge’s functional life, helping maintain repeatability across batches and shifts and ensuring trustworthy reference values for go/no‑go comparisons. Easy integration into inspection routines and fixtures The single‑piece configuration makes the gauge straightforward to use as a reference pin in fixture set‑up, end‑measurement benches or slot and hole verification routines. The M323.173 is particularly useful for end‑measure applications where compact diameters and tight tolerances define acceptance criteria. When documented inspection data are required, the stable dimension of this pin helps form a reproducible baseline for comparative checks and process validation, supporting traceability and quality audits. For dependable end‑measurement checks and workshop reliability, request the Metav IndustryLine pin gauge via Metav Werkzeuge in Emmerich or ask our specialists for a tailored recommendation. Technical Data Article number: M323.173 GTIN: 4061905056628 Description: Single pin gauge, diameter 1.73 mm, tolerance ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Core data Diameter: 1.73 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop execution Material: special steel Category: gauge pins Application trigger: end measurements FAQ What applications suit this gauge pin best? The pin gauge is intended for end‑measure verification, hole and bore checks and as a reference probe in fixture set‑ups; the M323.173 is optimised for small‑diameter checks where ±0.001 mm accuracy is required. Is the material suitable for regular workshop use? Yes, the special steel construction and workshop execution provide good wear resistance for routine inspection tasks and repeated insertions. How does the tolerance affect inspection outcomes? A ±0.001 mm tolerance reduces measurement uncertainty and improves repeatability, supporting stringent quality controls and lowering the risk of false rejects. Can this pin be used in fixture alignment or as a reference standard? The single, stable geometry of the gauge pin makes it appropriate for use as a reference pin in fixtures and alignment procedures, offering a reproducible datum for comparative measurements. What identification is available for procurement and traceability? This item is listed as M323.173 with GTIN 4061905056628 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.74mm Test Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
With a nominal diameter of 1.74 mm, a tight tolerance of ±0.001 mm and a 50 mm length in special steel, this workshop-grade test pin supplies a stable reference for repeatable end-measurements and fixture checks. Combine high accuracy, robust material and compact form to reduce setup time and minimise inspection variability. Order the M323.174 directly via Metav Werkzeuge or ask our consultants for application advice. Test pin M323.174 — precision gauge pin, 1.74 mm, ±0.001 mm (Metav IndustryLine) The Test pin M323.174 is a single-piece precision gauge pin intended for end-measurements, go/no-go checks and fixture alignment in workshop and inspection settings. 1.74 mm nominal diameter, ±0.001 mm tolerance 50 mm length for reliable fixture access Workshop version with robust special steel Compact reference for precision inspection Consistent accuracy for critical inspection points The pin’s defining characteristic is its ±0.001 mm tolerance on a 1.74 mm diameter, which delivers repeatable reference points for dimensional checks. Specified accuracy minimises measurement scatter and reduces the likelihood of downstream rework, making the component suitable as a reference in short-run quality checks and fixture validation. As a precision reference, the pin supports faster decision-making in inspection routines by providing a reliable datum for comparative gauging and setup verification. Built to withstand everyday workshop handling Manufactured from special steel and supplied as a workshop-grade component with a 50 mm length, the pin balances wear resistance and handling ease. The material choice improves resistance to abrasion during repeated seating in holders and jigs, while the compact form factor ensures straightforward placement in tight fixtures. Robust construction translates to longer service life under normal workshop use, helping maintain measurement consistency between inspection cycles. Easy integration into measurement and fixture workflows Designed as a single-piece gauge pin, this reference component fits standard holders and test benches used for end-measurements and alignment tasks. Its compact dimensions and precise tolerances reduce setup complexity and enable quicker reference checks, decreasing machine idle time and contributing to a more efficient inspection process. The combination of accuracy and handling benefits makes the pin a practical addition to routine quality-control tool sets in general mechanical and metrology environments. Contact Metav Werkzeuge for specification matching and to request the Metav IndustryLine M323.174 test pin as a reliable reference for inspection and fixture setup Technical data Article number: M323.174 GTIN: 4061905056635 Manufacturer: Metav IndustryLine Facts Diameter: 1.74 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Special features Material: Special steel Workshop version Single-piece supply Category: Gauge pin (Messstifte) FAQ What tolerance is achieved with this gauge pin? The M323.174 test pin is specified with a tolerance of ±0.001 mm, suitable for applications that require high repeatability. What are the physical dimensions of the pin? The pin has a nominal diameter of 1.74 mm and a length of 50 mm. Which material is used for the pin? This gauge pin is made from special steel chosen for mechanical resilience in workshop use. Is the pin supplied as a single item or in sets? The M323.174 is supplied as a single-piece test pin for individual use in fixture and reference tasks. For which applications is this pin intended? The pin serves as a reference for end-measurements, go/no-go checks and fixture alignment in inspection and workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com