Precision rulers for accurate alignment
Precision rulers are specialised measuring tools used to check flatness and straightness in metalworking and inspection processes, providing reliable alignment and verification for assemblies and machined surfaces. They are typically made from stainless steel or precision metals and serve machining, optics, electronics and quality control applications where tight tolerances are required; using a precision ruler improves repeatability and reduces non‑conformances. Common synonyms include straight edge and flatness gauge, and the durable construction alongside fine graduations ensures the tool remains accurate over years of workshop use.
1000mm Workshop Rule 40mm Wide, 5mm Thick, Bevel Edge With mm Scale - Metav IndustryLine
Take advantage of the combination of a ground special steel construction, a chamfered edge and clear mm graduations for dependable workshop layout and marking; order the rule directly via Metav Werkzeuge or consult our advisers for specification support. Workshop ruler M214.735 — 1,000 mm steel rule, chamfered with mm graduations (Metav IndustryLine) The Workshop ruler M214.735 is a robust, precision measuring and marking guide designed for everyday layout, scribing and inspection work in metal and general workshops. *1,000 mm steel rule with chamfered edge *Ground special steel for flatness and durability *Metric mm graduations for precise layout *2.0 kg weight for stable bench and hand use Accurate surface and clear graduations for reliable results The ruler is manufactured from ground special steel, a process that creates a consistently flat surface and minimises local deviations that cause measurement error. The mm graduations are clearly scribed for immediate readability during layout and marking; combined with the chamfered edge, this reduces burrs and protects the graduation from premature wear. For workshops where repeatability matters, the combination of a flat measuring face and precise metric divisions speeds up setup and reduces rework. Stable profile and durable construction for daily use A wider profile and a 5 mm thickness contribute to overall stability, so the rule resists unwanted bending during handling or when used as a straight edge. The substantial mass—about 2 kg—helps the rule sit securely on workpieces, reducing movement while scribing or checking alignment. The 40 mm width gives a larger contact area for more consistent results across the length of the tool, making it suitable for repeated use in fabrication, inspection benches and pattern marking. Practical handling, marking and inspection applications The straight, ground face serves as a reliable straight edge for scribing, cutting guides and visual checks, while the chamfer simplifies edge alignment against profiles and prevents catching on rough surfaces. As a metric steel rule, it integrates cleanly into existing workshop procedures for layout, transfer measurements and quick inspection tasks. Its robust finish ensures longevity under workshop conditions and supports rapid, repeatable workflows that save time on every job. Contact Metav Werkzeuge in Emmerich for expert advice and to secure the M214.735 workshop ruler with ground special steel for precise layout tasks Technical data Article number / SKU: M214.735 GTIN: 4054469109718 Manufacturer: Metav IndustryLine Facts Dimensions: 1,000 x 40 x 5 mm Weight: 2 kg Customs tariff number: 90178010 Special features Material: Special steel, ground Chamfered edge Metric mm graduations FAQ What materials is this ruler suitable for marking and checking? The M214.735 workshop ruler is intended for general workshop use and is suitable for layout and marking on metals, composites and many workshop surfaces where a straight, flat reference is required. How does the ground finish benefit measurement tasks? A ground surface improves flatness and reduces local deviations; this means more consistent contact with the workpiece and fewer measurement errors when using the rule as a reference or straight edge. Is the edge protected against wear? The chamfered edge reduces the risk of burr formation and shields the graduation line from direct impact, extending the useful life of the metric mm divisions. Can the ruler be used as a straight edge for cutting guides? Yes, the robust profile and flat contact face make it suitable as a straight edge for marking and as a temporary guide for manual cutting or scribing operations. What distinguishes this workshop ruler from a lightweight scale? The heavier profile and ground special-steel construction of the M214.735 prioritise stability and durability over portability, providing a reference that resists bending and keeps measurements consistent during repetitive tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Ruler With Mm Scale, Anodised Aluminium - Metav IndustryLine
Combine millimetre graduations with an anodised aluminium profile to secure fast, repeatable layout work and minimise handling fatigue thanks to a lightweight design; order via Metav Werkzeuge or consult our specialists for further advice. Workshop Rule M203.055 (Anodised Aluminium, 1,000 mm) The Workshop Rule M203.055 is an anodised aluminium measuring rule with millimetre graduation and a non‑glare finish, built for reliable layout and measurement tasks across general workshop applications Anodised aluminium for corrosion resistance Millimetre graduations for exact layout Non‑glare surface reduces reflections Lightweight yet stable for manual handling Precision for everyday workshop tasks The rule’s millimetre graduations and straight, rigid profile provide a dependable reference for marking and measuring. The anodised aluminium construction combines durability with low weight, so repetitive layout operations remain precise without unnecessary fatigue. In practice, the clear graduations reduce visual strain and speed up dimension transfer between drawing and workpiece, supporting efficient throughput in routine machining and assembly tasks. Practical finish and handling benefits A non‑glare finish enhances readability under workshop lighting and reduces measurement errors caused by reflections. The surface treatment also improves scratch resistance and eases cleaning, prolonging service life in demanding environments. The slim profile ensures good edge contact for accurate scribing, while the low mass allows single‑handed handling for quick checks and line transfers on benches or portable fixtures. Integration into the workplace and quality assurance As a simple, robust measuring tool, this rule supports shop workflows where speed and repeatable references matter more than ultra‑fine metrology. The combination of anodised surface and millimetre scale makes it well suited for layout, carpentry, sheet metal and general fabrication tasks. For buyers seeking a reliable base instrument, the measure serves as a low‑maintenance standard that complements digital calipers and other precision instruments in the toolset. Contact Metav Werkzeuge today for tailored advice on fitting this anodised aluminium rule into production workflows — Metav Werkzeuge can advise on availability and compatibility with existing shop equipment Technical data SKU: M203.055 GTIN: 4054469183381 Material: Aluminium, anodised Finish: Non‑glare / mm graduation Facts Dimensions: 1,000 × 50 × 5 mm (L × W × H) Weight: 0.2 kg Special features Workshop rule (length 1,000 mm) Millimetre graduation Eloxiert (anodised) surface Lightweight design for manual handling FAQ What material is the rule made from? The rule is manufactured from anodised aluminium; the anodised surface gives corrosion resistance and a non‑glare finish for easier reading. Is the scale suitable for precision layout work? Yes, the millimetre graduations on the Workshop Rule M203.055 provide clear, repeatable reference lines suitable for most workshop layout and marking tasks. Can the rule be used in metalworking and carpentry? The anodised aluminium construction and straight profile make this rule versatile for metalworking, carpentry and general fabrication tasks where reliable length references are required. How should the rule be cleaned and maintained? Cleaning with a soft cloth and mild detergent is sufficient; the anodised surface resists corrosion and light wear, aiding long‑term usability. Does the rule require calibration? This workshop rule is a layout instrument; for traceable calibration needs, consult Metav Werkzeuge for suitable precision measuring equipment and services. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Scale 40x5mm Bevelled Edge No Graduation - Metav IndustryLine
Take advantage of a 1,000 mm straightedge that combines ground special steel construction and a precise facetted edge for robust layout work; the non‑graduated surface delivers an unobstructed scribing line and a stable reference for large components. Order the ruler directly via Metav Werkzeuge or consult the team for inventory and technical advice. Workshop ruler 1000 x 40 x 5 mm — Facetted edge, ground special steel (no graduations) | Metav IndustryLine A Workshop ruler 1000 x 40 x 5 mm designed as a stable, non‑graduated straightedge for layout, marking and alignment tasks in machine shops and fabrication work 1,000 mm length for large components Ground special steel for high straightness Facetted edge for precise marking Smooth, non‑graduated surface for scribes Accurate reference for large‑format layout and marking The straightedge’s 1,000 mm overall length provides the reach required for layout on sizable workpieces while maintaining profile stiffness. Manufactured from ground special steel, the rule resists twisting and preserves a true edge across its span; the mass contributes to stable placement during scribing and alignment tasks. The facetted edge acts as a defined marking surface, enabling repeatable lines without the visual clutter of graduations. This construction benefits workshops seeking a reliable, repeatable reference for cutting guides, panel layout and machine set‑up. Clear benefits for precision and shop productivity A non‑graduated design removes potential parallax and marking errors when a continuous straight line is needed rather than incremental measurement. The facetted edge provides a crisp contact line for scribes and pens, while the ground finish reduces burrs and irregularities that could impair accuracy. At approximately 2 kg, the rule balances solidity with manageable handling, reducing the need for constant repositioning and thereby saving time on repetitive marking tasks. For applications where a visual scale is unnecessary, this shop rule simplifies workflows and reduces the risk of misreading scale markings. Handling, maintenance and integration into the workshop Surface treatment and machining ensure a smooth, durable working face that tolerates normal shop use; light wiping and periodic protection from aggressive coolants will extend service life. The straightedge is well suited to clamp mounting or use alongside layout jigs and parallel blocks; the flat, ground underside assists in achieving full‑length contact on flat surfaces. The robust profile also makes the rule appropriate as a temporary guide for cutting or as a screening straightedge during assembly operations. Where traceability or supply queries arise, Metav IndustryLine documentation and stock information are available. Contact Metav Werkzeuge for availability, delivery options and technical clarification on the Metav IndustryLine workshop ruler M214.725 Technical data Article number: M214.725 GTIN: 4054469109640 Tariff number: 90178010 Facts Dimensions: 1000 x 40 x 5 mm Weight: 2 kg Materials and special features Material: ground special steel Edge: facetted edge for precise marking Surface: non‑graduated / without divisions Category: workshop ruler / straightedge SKU: M214.725 FAQ Is the ruler suitable for layout and marking on large panels? Yes. The workshop ruler M214.725 is 1,000 mm long and provides a stable straightedge for panel layout, cutting guides and large‑format marking. Does the rule have any graduations or scale markings? No. The surface of this Metav IndustryLine workshop ruler is non‑graduated, offering a smooth edge intended for scribes and unobstructed marking. What material is used and how does it affect accuracy? Constructed from ground special steel, the rule maintains straightness and resists deformation, ensuring repeatable reference lines across the full length. Is the ruler heavy to handle and how should it be cared for? At approximately 2 kg, the ruler is solid yet manageable; routine cleaning and protection from aggressive fluids will preserve the ground finish and edge integrity. Can the ruler be clamped for fixed layout work? Yes. The flat, ground underside and sturdy profile make it suitable for clamping to benches or jigs to serve as a temporary guide during assembly or cutting operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100m Frame Tape Measure 13mm Steel Band EG II Steel Band Start B - STABILA
Take advantage of a long-range, 100 m measuring system with a steel tape and 13 mm band width for clear, reliable readings; the frame design reduces handling time and supports efficient site work. Order the LBM 1000 STEEL directly via Metav Werkzeuge or consult their specialists for specification advice. LBM 1000 STEEL frame tape measure by STABILA — 100 m steel band, 13 mm The LBM 1000 STEEL is a robust frame tape measure intended for long-distance linear measurement tasks in construction, surveying and workshop applications, offering metric graduations on a durable steel band for repeatable, traceable results. 100 m steel band for long-range measurement 13 mm wide tape for clear readability Metric graduation in millimetres Robust frame design for workshop use Reliable long-range measurement that speeds up site work The combination of a 100 m tape length and a compact frame enables fewer repositionings during large-scale measuring tasks, which shortens project time. The solid steel band resists elongation and guarantees consistent measurements over repeated use, so measurement-related rework is minimised. The specification “measurement start: B” indicates a defined tape origin suited to standard site procedures, supporting straightforward integration into existing workflows. For technical teams requiring reliable linear data, this configuration improves operational efficiency and reduces the frequency of recalibration. Clear readings and straightforward metric graduations for accuracy A 13 mm band width provides a stable surface for visible markings and easier alignment on edges and joints, while the millimetre graduation offers fine resolution for precise layout tasks. For those less familiar with industrial measurement terms: millimetre graduation means each smallest division corresponds to one millimetre, allowing for accurate transfer of dimensions without guesswork. The pronounced contrast of the markings on a steel tape helps on bright construction sites and in shaded indoor environments, so inspectors and craftsmen can record values faster and with fewer transcription errors. Practical frame design and durable materials for everyday use The frame tape measure’s construction focuses on handling and longevity: the rigid frame protects the band when stored and provides a stable grip during one-person operation. The steel band resists nicks and bending better than many thin-fabric tapes, which lowers the total cost of ownership through extended service life. Supplied as a single unit, the tool fits routine kit lists for site supervisors and workshop technicians who demand durable metrology tools that do not require frequent replacement. The product’s specification aligns with professional practice, delivering a dependable measuring instrument for repetitive, long-distance tasks. Choose the STABILA LBM 1000 STEEL for dependable 100 m measurement and contact Metav Werkzeuge for technical advice and prompt supply from Emmerich Technical data SKU: 8000911843NW Type: LBM 1000 STEEL Product label: Rahmenbandmaß LBM 1000 STEEL L.100m Band-B.13mm mm EG II Stahlband Brand: STABILA Product type: Frame tape measure Measurement start: B UID: 8000911843NW Facts Length: 100 m Tape width: 13 mm Graduation: mm Packaging unit: 1 Special features Steel band Metric graduation in millimetres Robust frame design Suited to construction and surveying tasks FAQ How long is the tape and what is its main material? The tape extends to 100 m and is made from a durable steel band, offering long-range capability and resistance to deformation. Is the graduation suitable for precise layout work? Yes, the millimetre graduation on the LBM 1000 STEEL enables fine-resolution readings appropriate for accurate layout and transfer tasks. What does “measurement start: B” mean for site use? Measurement start: B indicates the defined tape origin used in this model, ensuring consistent reference points when taking linear measurements on site. Is this tape measure suitable for single-person operation on site? The frame design and band width of the LBM 1000 STEEL support straightforward one-person handling for many long-distance tasks. Can the tape withstand rough construction environments? The steel band and protective frame make the tool resilient to typical site wear, reducing the need for frequent replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Glass Rule 0.5mm Graduations 1.5+2L/1000µm Accuracy, Sodium Glass, Supplied In Case - Metav IndustryLine
Take advantage of precise optical checking with a compact, durable soda‑lime glass body and a clear 0.5 mm engraved scale — the combination delivers repeatable microscope verification in a small footprint. Order directly via Metav Werkzeuge or consult our specialists for application advice. Glass ruler – compact verification gauge for microscopes, 130 mm, 0.5 mm scale (Metav IndustryLine) The Glass ruler is a compact verification gauge for microscopes and optical benches, designed for fine visual calibration and routine optical checks in workshops and laboratories. 130 mm total length for compact benches Soda‑lime glass body for stable optics 0.5 mm engraved scale for clear reading Supplied in protective transport box Accurate small‑format verification for optical instruments The measuring strip is engineered for consistent, repeatable checks on optical equipment. With a total length of 130 mm and a fine 0.5 mm scale, this compact gauge provides the reach required for conventional microscope stages while remaining rigid enough for bench use. The specified accuracy expression (1,5+2L/1000) µm gives a transparent statement of measurement behaviour across the length, enabling technicians to assess measurement uncertainty when documenting inspection results. As a micro‑range device (max 100 mm), it fits the typical needs of precision visual inspection and fine mechanical work. Optical stability and easy readability for reliable results Constructed from soda‑lime glass, the rule combines low thermal expansion and good surface stability to maintain its graduation legibility over time. The 0.5 mm engraving is mechanically resistant and contrasts well against a variety of surfaces, which simplifies alignment under low magnification on a microscope stage. These properties reduce rework and shorten inspection cycles by improving the speed and confidence of visual checks. The low mass and flat geometry also help to minimise handling errors during repeated staging operations, supporting consistent outcomes in routine quality control. Compact handling, protected delivery and workshop practicality Weighing just 0.05 kg and measuring 30 mm width with a 5 mm thickness, the instrument is easy to position and store without compromising stability. Delivery includes a protective transport box to safeguard the glass during transit and workshop handling, making it suitable for both production floors and mobile sets. Marked with a clear SKU (M910.521) and GTIN for stock management, the gauge integrates straightforwardly into inspection protocols and documentation workflows, supporting traceability and inventory control. For precise optical verification choose the Metav IndustryLine Glass ruler (SKU M910.521) — contact Metav Werkzeuge in Emmerich for technical advice or to arrange supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M910.521 GTIN: 4061905449000 Manufacturer: Metav IndustryLine Facts Total length: 130 mm Measurement range: 0–100 mm Width: 30 mm Thickness: 5 mm Weight: 0.05 kg Scale: 0.5 mm Accuracy: (1,5+2L/1000) µm Special features Material: soda‑lime glass Micro‑range gauge (max 100 mm) Engraved, corrosion‑resistant graduations Supplied in protective transport box FAQ How is the gauge best used to check a microscope stage alignment? The Glass ruler (Metav IndustryLine, SKU M910.521) is placed on the stage so that the graduations align with the optical axis; observations through the optics verify straightness and parallelism of stage movement. Can the rule be used for measurements other than microscope checks? Yes, the compact format and clear 0.5 mm graduations make the gauge suitable for any small‑format visual inspection or alignment task where a rigid, flat reference is required. What does the accuracy notation mean for practical use? The accuracy (1,5+2L/1000) µm indicates the expected deviation relative to length; it allows technicians to estimate uncertainty for each measurement and to include that value in inspection reports. Is the material suitable for routine workshop environments? The soda‑lime glass construction offers stable optical properties and abrasion‑resistant engravings; the supplied protective transport box reduces risk of damage during regular handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Glass Rule For Microscope Verification, 0.1mm Scale, Soda‑Lime Glass, Supplied In Case - Metav IndustryLine
Take advantage of the combination of high measuring precision, a clear 0.1 mm graduation and a compact 0–100 mm range to speed up optical set‑up and routine checks. Order the item directly via Metav Werkzeuge or contact the consultants for advice on integration into laboratory or workshop workflows. Glass ruler M910.255 — Soda‑lime glass, 0–100 mm measuring range The Glass ruler serves as a compact reference gauge for precise optical alignment and small‑part measurement in laboratories and fine‑mechanical workshops. Soda‑lime glass construction 0.1 mm graduation scale Measurement range 0–100 mm Compact overall length 130 mm High precision that scales with the measured length The instrument offers a specified accuracy of (1.5 + 2L/1000) µm, a formula that indicates how permissible deviation increases with the measured length L; this makes the device particularly suited where repeatable, short‑range checks are required. Made from soda‑lime glass, the ruler provides a stable, flat reference surface with a clear 0–100 mm span and a fine 0.1 mm graduation. Such specification supports efficient optical verification tasks by delivering numerical certainty rather than visual estimation. Compact format for easy handling and rapid checks With an overall length of 130 mm, a width of 30 mm and a thickness of 5 mm, the gauge combines reach and manoeuvrability for everyday use. Its lightweight construction (approx. 0.05 kg) reduces handling fatigue and facilitates quick positioning on stages or small fixtures. The compact form factor suits bench work where space is limited and a short, rigid reference is preferable to longer, more cumbersome instruments. Material and readability designed for measurement routines The choice of glass ensures excellent surface flatness and optical transparency, which helps when aligning measuring microscopes or inspecting small components under magnification. The fine 0.1 mm graduation is ideal for visual comparison and coarse sizing prior to micrometre or caliper follow‑up, providing a reliable intermediate step in quality workflows. The material also allows straightforward cleaning and low sensitivity to marking abrasion, supporting sustained readability in regular use. Practical identification and workshop integration The gauge is supplied with a distinct article code and GTIN for inventory and procurement control, making procurement and stock keeping simple. Integration into existing inspection routines is straightforward: the short measuring range and clear scale support quick decisions during set‑up and first‑article inspections, while the compact design favours storage alongside microscopes and measuring stands. Contact Metav Werkzeuge today to confirm suitability for optical calibration tasks or to request delivery directly from Emmerich. Technical data Article number: M910.255 GTIN: 4061905448997 Manufacturer: Metav IndustryLine Material: Soda‑lime glass Measurement range: 0–100 mm Overall length: 130 mm Width: 30 mm Thickness: 5 mm Weight: 0.05 kg Graduation: 0.1 mm Accuracy: (1.5 + 2L/1000) µm Intended use: Optical alignment, reference measuring Surface: Glass flat reference Packaging: Transport packaging suitable for small instruments Category: Rulers / Lineales FAQ What kind of tasks is this glass ruler best suited for? The glass ruler is ideal for optical alignment, coarse sizing and set‑up checks in laboratories and fine‑mechanical workshops, where a short, flat reference with a 0–100 mm range is required. How precise is the measurement and what does the accuracy formula mean? Accuracy is given as (1.5 + 2L/1000) µm, which means permissible deviation increases slightly with the length L being measured; the specification is intended to clarify expected performance across the working range. Can the ruler be used together with a microscope for calibration checks? Yes, the gauge’s transparent, flat glass surface and fine 0.1 mm graduation make it suitable as a reference for optical checks and alignment procedures under microscopes. How is the item identified for procurement and stock control? The product is identifiable by article number M910.255 and GTIN 4061905448997, facilitating ordering and inventory management. Is the material suitable for routine workshop use? Soda‑lime glass offers good surface flatness and ease of cleaning, providing sustained readability and durability for regular inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Rule Magnifier 10x With Guided Lens Parallax-Free Reading In Case - Metav IndustryLine
Take advantage of compact, workshop-ready precision combined with clear magnified reading and robust stainless-steel construction for dependable small-format measurement. Order the measuring instrument directly via Metav Werkzeuge or consult our specialists for application-specific advice. Measuring Ruler with 10× Magnifier — Metav IndustryLine A Measuring Ruler with 10× Magnifier designed for precise small-format measurements in workshops, inspection benches and fine-mechanical assembly. Parallax-free reading for reliable results 10× magnifier for fine-detail inspection Precision ±0.02 mm accuracy Durable stainless-steel construction Compact precision for fine-mechanical work Designed for tasks that demand exactitude in a small footprint, this measuring magnifier combines a measurement range 0–100 mm with an overall length of 150 mm, placing it in the micro-class for precision instruments. The guided magnifier delivers 10× magnification, which together with the parallax-free reading reduces reading errors and speeds up inspection of small components. The scale division of 0.1 mm provides an intuitive base reading; the stated ±0.02 mm accuracy indicates suitability for detailed quality checks and repeatable production controls in toolrooms, watchmaking and fine assembly. Robust construction that endures workshop use The instrument is made from stainless steel, ensuring resistance to routine workshop wear and moderate corrosion, which supports a long service life under normal industrial conditions. The solid material and compact geometry reduce flexing during handling, maintaining reproducible contact when measuring small parts or features. This mechanical reliability translates into fewer rechecks, faster process cycles and generally more efficient quality assurance on the shop floor. Clear reading and practical handling for everyday inspection The guided magnifier and parallax-compensated scale make visual interpretation straightforward even under workshop lighting; the enlarged view highlights edges and graduations for faster decision-making during inspection and setup. As a compact measuring tool, it is easy to handle and stow, while its accuracy and durable finish ensure it remains a dependable reference for routine checks. The combination of optical assistance and a solid stainless-steel frame delivers both measurement clarity and practical robustness for repetitive tasks. For consistent small-format measurement, contact Metav Werkzeuge in Emmerich for bespoke advice or to purchase the Metav IndustryLine measuring ruler — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M903.205 GTIN: 4061905449086 Category: Rulers Facts Measurement range: 0–100 mm Overall length: 150 mm Magnification: 10× Accuracy: ±0.02 mm Scale division: 0.1 mm Parallax-free reading: Yes Special features Material: stainless steel Guided magnifier Compact micro-range instrument Ideal for fine-mechanical inspection FAQ What measurement range does the instrument cover? The instrument covers a 0–100 mm range, classifying it as a micro-range measuring device suitable for fine-mechanical and small-component inspection. What accuracy and scale resolution can be expected? Accuracy is specified as ±0.02 mm with a scale division of 0.1 mm, while optical magnification aids precise reading of the graduations. Is the tool suitable for daily workshop use? Yes. Constructed from stainless steel, the measuring ruler with magnifier withstands routine workshop handling and is intended for regular inspection and assembly tasks. How does the magnifier improve measurement reliability? The 10× magnifier enlarges scale markings and edges, and combined with parallax-free reading it reduces interpretation errors and speeds up visual inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10m Pocket Tape Measure Two-Component Soft-Grip ABS Housing Auto Lock, Class II - BMI
Take advantage of a durable 10 m measuring blade and a shock‑resistant ABS housing with soft‑touch grip for reliable, fast measurements on site; the automatic blade retraction with stopper keeps operations efficient and safe. Order the tape measure directly via Metav Werkzeuge or consult our specialists for technical advice. twoComp 10 m pocket tape measure (BMI) — 10 m blade, 30 mm wide, automatic retraction The twoComp 10 m pocket tape measure is a compact, workshop-ready measuring tool designed for trade and site applications with a resilient ABS housing and automatic blade return Robust 10 m / 30 mm measuring blade Shock‑resistant ABS housing with soft grip Automatic blade retraction with stopper Belt clip for secure attachment Built for reliable, traceable measurement on site The 10 m blade with 30 mm width and mm/mm graduations provides a clear, stable measuring surface that reduces flutter and improves reading speed. The instrument is supplied with EC accuracy class II, which means it meets the standard tolerance band for professional measuring tasks and is suitable for most workshop and site measurements. The solid blade profile and robust band mechanism ensure that linear measurements are transferred consistently; when higher precision is required, the defined accuracy class helps planners and buyers to compare tools objectively. Faster measurements and safer handling for everyday work An automatic retraction system with a built-in stopper enables one‑hand operation and prevents uncontrolled blade return, which improves safety and cycle time during repeated measuring tasks. The soft‑touch outer shell set into a shock‑resistant ABS housing offers an ergonomic grip that reduces slippage and fatigue during longer jobs. A belt clip provides hands‑free transport and secure attachment on the work belt, allowing the measuring device to be kept close at hand without risk of loss. Robust construction for low maintenance and long service life The casing is made from ABS, chosen for impact resistance and chemical stability in workshop environments; the overall design reduces the need for frequent repairs or replacements. Combined with the robust band mechanism, this results in lower downtime and predictable service life, contributing to operational efficiency and a favourable total cost of ownership. The compact format and practical features make the tool well suited to carpenters, installers and maintenance technicians who require dependable everyday performance. For durable, professional measuring tools, request the BMI twoComp 10 m pocket tape measure through Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to clarify specifications and compatibility with existing workflows Technical data SKU: 8000447493NW Product type: Pocket tape measure Brand: BMI Packaging unit: 1 Label: Taschenrollbandmaß twoComp L.10m B.30mm mm/mm EG II ABS Automatic SB BMI Facts Blade length: 10 m Blade width: 30 mm Accuracy: EC class II Special features Housing material: ABS Robust band mechanism Soft‑touch component for improved grip Automatic blade retraction with stopper Belt clip for attachment mm/mm graduations FAQ What is the usable blade length and width of this tape measure? The BMI twoComp 10 m pocket tape measure offers a 10 m blade length and a 30 mm blade width, suitable for most general measuring tasks on site and in the workshop. Which accuracy class does the measuring device meet? This pocket tape measure is supplied in EC accuracy class II, which defines the tolerance range for professional measuring tools and supports reliable comparison between instruments. What materials and protections are used for the housing? The casing is manufactured from ABS, combined with a soft‑touch component for grip; this construction is designed to withstand routine workshop impacts and handling. Is the tape measure suitable for frequent one‑hand operation? Yes — the automatic retraction with integrated stopper and the ergonomic soft‑touch housing facilitate secure one‑handed measuring and reduce handling time. Can the tape measure be carried on a work belt? A built‑in belt clip is provided for secure attachment to a belt or pocket, making the device readily accessible during assembly and installation tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10m Radius Capsule Tape Measure 13mm Fibreglass Blade Centimetre Graduation A Start - BMI
Take advantage of the combination of durable fibreglass construction, clear cm graduations and a compact, highly visible casing to speed up on-site measuring and reduce rework. Order the measuring tool directly via Metav Werkzeuge or consult our specialists for application advice. RADIUS 10 m cased tape measure – 13 mm fibreglass tape The RADIUS 10 m cased tape measure is a compact cased tape for precise linear measuring in construction, installation and general workshop use. 10 m fibreglass tape, highly flexible 13 mm tape width for clear graduations Yellow tape backing for high visibility A-start measurement for accurate hook positioning Faster, reliable measurements for repetitive tasks The fibreglass tape offers consistent elongation behaviour and resists kinking, which keeps measurements accurate over repeated use. With a 10 m reach and cm graduations, this cased tape is tailored for linear layout and quick checks on site. The 13 mm tape width stabilises the scale and makes markings easier to read from typical working distances, reducing the likelihood of transcription errors and rework. The incorporated A-start feature ensures the measuring hook accounts for its thickness, enabling correct inside and outside measurements without manual correction. Built to withstand rough environments and remain visible A hard-wearing casing combined with the bright yellow backing keeps the tape easy to locate on busy jobsites and in workshop drawers. The fibreglass blade tolerates moisture and most workshop contaminants better than metal alternatives, offering longevity during repetitive external use. The compact housing protects the mechanism from impacts while remaining lightweight for portable tasks; this balance of durability and ergonomics minimises downtime and tool replacement costs. Simple handling that speeds up daily workflows The compact design and clear scale make the tool fast to deploy for marking and verification. The blade’s stiffness provides an extended reach without sagging, so single-person measurements are more reliable. The cased tape supports efficient measurement cycles and reduces handling time, which contributes directly to smoother production flow and time savings on recurring layout work. For teams aiming to standardise measuring practice, this tool supports consistent results across different operators. A dependable supply and pragmatic support Sourced for workshop and construction use, this cased tape reflects practical design choices that favour reliable performance over unnecessary complexity. Supplied in single units, the product is ideal for equipping technicians or integrating into existing tool kits where dependable, low-maintenance measuring equipment is required. For procurement and stocking decisions, choosing a straightforward, robust measuring tool minimises administrative overhead and helps keep projects on schedule. Contact Metav Werkzeuge for procurement of the RADIUS 10 m cased tape — expert advice and reliable supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 4000855700NW Type: RADIUS Product: Cased tape measure Manufacturer: BMI Facts Length: 10 m Tape width: 13 mm Graduation: cm Packaging unit: 1 Special features Fibreglass tape Yellow tape backing for visibility A-start measurement (hook compensated) Compact protective case FAQ Is the blade suitable for outdoor use and does it resist moisture? The fibreglass blade of the RADIUS 10 m cased tape measure resists moisture better than many metal blades, making it suitable for outdoor work and damp workshop conditions. How does the A-start feature affect measurement accuracy? A-start means the measuring hook is compensated in the scale so that inside and outside measurements account for the hook thickness, ensuring accurate results without manual adjustment when using the RADIUS tape. What is the readable graduation on the tape? The tape is graduated in cm, providing clear, centimetre-level resolution for layout and verification tasks. Is the tape stable for single-person extended reach measurements? Yes, the 13 mm tape width and fibreglass construction give sufficient stiffness to reach shorter spans without excessive sag, aiding single-person operation. Can this tool be used for heavy industrial layout or only light tasks? The RADIUS cased tape measure is designed for general workshop and construction applications; its fibreglass blade and protective casing suit frequent, practical use though it is not intended as a precision gauge substitute for laboratory metrology Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10m Tape Measure BM 300 Pocket Roll Tape 27mm Blade mm/mm PC-ABS/TPE Easy-Clip - STABILA
Compact reliability meets workshop practicality: the robust PC‑ABS/TPE housing, combined with a 10 m metric blade and a wide 27 mm tape, ensures steady measuring and long service life. Order directly via Metav Werkzeuge or consult our specialists for delivery from Emmerich. BM 300 — pocket tape measure, 10 m, 27 mm blade (STABILA) A compact BM 300 pocket tape measure for precise metric length measurement in workshop and site applications, combining a sturdy plastic overmould case with a wide blade for improved rigidity. 10 m metric blade for extensive reach 27 mm wide tape for increased stability PC‑ABS/TPE impact‑resistant casing EASY‑CLIP belt fastening for quick access Built for heavy use with predictable results The housing is constructed from PC‑ABS/TPE, an impact‑resistant polymer blend that protects the measuring device against drops and knocks common in workshops. This robust build reduces downtime by prolonging service life and lowering maintenance frequency. The design concentrates on consistent performance under regular use, so the measuring device delivers precision over countless cycles without unnecessary complexity. Clear material choice and mechanical protection provide a verifiable basis for purchase decisions in trade and industry. Accurate metric measuring with a rigid blade A 10 m blade marked in mm/mm and measuring 27 mm across offers a balance of reach and stiffness: the wider tape resists sagging and enables more accurate single‑handed measurements on longer runs. The metric scale ensures easy reading for standard workshop tasks, while the tape width and blade profile reduce errors caused by flexing. For those unfamiliar with tape geometry: a wider blade increases the unsupported length before the tape bends, improving repeatability when measuring distances beyond a metre or two. Practical handling speeds up daily workflows The integrated EASY‑CLIP belt fastening keeps the tape measure within reach, cutting time spent searching for tools and supporting a smoother workflow. The compact form factor and straightforward retraction mechanism make measurement tasks quicker and less fatiguing, which in turn improves throughput on routine jobs. Lightweight instruments that remain close to the operator support continuous productivity, while the clip design attaches securely to belts or pockets for convenience on site. Compliance, care and clear expectations The instrument is labelled for standard measuring duties and fits typical site and workshop requirements; blade markings in mm/mm conform to common metric practice. Basic upkeep—keeping the tape clean and retracting it slowly to avoid impact—extends lifetime and maintains reading accuracy. For complex or specialised applications, the specification allows straightforward comparison with alternative measuring tools, helping procurement decisions based on objective criteria rather than assumptions. Choose the STABILA BM 300 for durable, metric measuring and contact Metav Werkzeuge for tailored advice or supply from Emmerich: +49 2822 7131930, info@metav-werkzeuge.com Technical Data Article number: 8003605874NW Type: BM 300 Label: Taschenrollbandmaß BM 300 L.10m B.27mm mm/mm EG II PC-ABS/TPE EASY-CLIP STABILA Product type: Pocket tape measure Brand: STABILA UID: 8003605874NW Numbers / Core Technical Data Blade length: 10 m Tape width: 27 mm Scale division: mm/mm Packaging unit: 1 Special features / Design PC‑ABS/TPE impact‑resistant case EASY‑CLIP belt fastening Wide, rigid 27 mm blade for reduced flex Metric markings (mm/mm) FAQ How long is the measuring blade and what scale does it use? The tape offers a 10 m blade with mm/mm metric graduations, enabling standard metric measurements for workshop and site tasks. Is the casing suitable for everyday workshop use? Yes, the casing is made from PC‑ABS/TPE, providing impact resistance and wear protection for the STABILA pocket tape measure with SKU 8003605874NW. Does the tape stay rigid on longer measurements? The 27 mm wide blade increases stiffness compared with narrower tapes, reducing sag and improving single‑handed measuring accuracy. What fastening does the tape offer for on‑site convenience? The integrated EASY‑CLIP belt fastening secures the tape to a belt or pocket for quick access and safe transport. Are the blade markings suitable for precision work? Markings in mm/mm meet common metric requirements; for highly specialised precision tasks, refer to measurement specifications and tolerances appropriate to the application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Auxiliary Inspection Loupe - Metav IndustryLine
Take advantage of the combination of 10× magnification and a compact slide-on design to improve scale readability and reduce reading errors; precise results with minimal workflow interruption. Order the Second sliding magnifier directly via Metav Werkzeuge or ask our consultants if needed. Second sliding magnifier — 10× auxiliary magnifier for calipers (Metav IndustryLine) The Second sliding magnifier is an auxiliary optical aid for improving the legibility of vernier and dial graduations on precision measuring tools in workshop and inspection environments. 10× magnification for fine scale reading Compact slide-on mounting for verniers Clear optical contrast for reduced eye strain Read finer graduations with greater confidence A 10× magnification lens provides a clear enlargement of scale markings, allowing finer divisions to be read with reduced ambiguity. This enlargement makes it easier to identify the exact graduation on a vernier or scale, which in turn reduces the likelihood of transcription errors during measurement logging. The optical aid is especially helpful where lighting conditions or small graduations limit visual clarity, supporting consistent precision in routine quality checks. Simple integration into existing measuring setups The accessory is designed for quick retrofitting to compatible measuring slides, offering a discreet, slide-on attachment that does not obstruct normal handling of the gauge. Installation and alignment are straightforward, enabling inspection tasks to continue with minimal interruption. The compact construction keeps the optical element close to the scale, preserving the reading angle and reducing parallax effects that can otherwise introduce small but consequential deviations. Practical benefits across workshop and inspection tasks This auxiliary loupe suits inspection benches, assembly stations and maintenance routines where clear scale reading increases throughput and reduces rework. The device supports faster decisions during measurement sequences and decreases operator fatigue by improving contrast and focus on fine markings. It is provided under the Metav IndustryLine designation M903.209, making it easy to reference when specifying tools or ordering spare accessories. For improved measurement reliability choose the Metav IndustryLine Second sliding magnifier — contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for product guidance and availability Technical data Article number: M903.209 GTIN: 4061905450051 Manufacturer: Metav IndustryLine Product: Second sliding magnifier Magnification: 10× Facts Magnification: 10× GTIN: 4061905450051 SKU: M903.209 Special features Auxiliary magnifier for calipers and vernier scales Slide-on optical aid for improved readability Suitable for workshop inspection and quality control FAQ Is the magnifier compatible with standard calipers? The Second sliding magnifier is designed as an auxiliary loupe for use with vernier-style and similar scale-based calipers; compatibility depends on the slide geometry of the instrument. Does the magnifier alter the calibration of the instrument? The accessory does not change the measurement datum; it is an optical aid only and does not affect the calibrated condition of the measuring instrument. How does 10× magnification improve measurement results? A 10× lens enlarges scale markings so that smaller graduations can be discriminated more reliably, which reduces reading uncertainty and supports consistent measurement documentation. Which environments benefit most from this magnifier? Inspection benches, assembly stations and any workstation where fine graduations must be read reliably benefit from the improved contrast and reduced eye strain provided by this optical aid. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125 mm Stainless Steel Hairline Rule DIN 874/00 Hardened, Ground and Lapped - Metav IndustryLine
Benefit from the combination of robust stainless-steel construction, precise hairline graduation and DIN 874/00 conformity for reliable workshop measurement. Order the hairline rule directly via Metav Werkzeuge or contact our consultants for application advice. Hairline rule 125 mm (INOX) DIN 874/00 — Metav IndustryLine Hairline rule 125 mm (INOX) DIN 874/00 is a compact stainless-steel measuring instrument for precise layout, inspection and marking tasks in workshops and toolrooms Hardened stainless steel, ground and lapped Hairline graduation for fine measurements Compliant with DIN 874/00 standard Compact 125 mm length for tight spaces Precision that supports reliable decisions This compact instrument delivers consistent, repeatable readings thanks to its stainless steel construction that is fully hardened, then ground and lapped to minimise wear and surface irregularities. The hairline graduation provides clear, fine reference marks that make small adjustments and layout lines straightforward, while conformity to DIN 874/00 ensures the rule meets recognised industrial tolerances. These attributes reduce measurement uncertainty and speed up inspection loops in routine production and quality control. Compact format for tight workspaces and toolroom use At 125 mm, the rule is sized for confined setups where reach must be balanced against stiffness: its short length keeps the profile rigid for precise linear comparisons and marking tasks. The modest weight (0.1 kg) and slim geometry make the instrument practical to handle and position repeatedly without hand fatigue, so small-series assembly, die checks and benchwork benefit from faster cycling times and fewer re-measurements. The clear graduations aid visual alignment and minimise interpretation errors during fast-paced operations. Durable make and traceable identification for workshop logistics Manufactured from hardened, ground and lapped stainless steel, the rule resists corrosion and mechanical wear, extending service life under everyday workshop conditions. Traceability is supported by clear product identifiers such as SKU and GTIN, which simplify stock control and reordering. The combination of robust materials and standardised marking reduces the total cost of ownership by limiting the need for frequent replacements and ensuring consistent measurement quality across multiple workstations. Request a technical consultation from Metav Werkzeuge for application-specific advice or to confirm suitability for specific inspection tasks — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M214.120.2 GTIN: 4054469106694 Label: Haarlineal INOX 125 mm DIN 874/00; 0,1 kg Dimensions & weight Length: 125 mm Weight: 0.1 kg Harmonised system code: 90173000 Materials & features Material: stainless steel, fully hardened, ground and lapped Standard: DIN 874/00 Category: Lineal FAQ What standard accuracy does this rule meet? The hairline rule conforms to DIN 874/00, providing standardised tolerances suitable for workshop and inspection tasks. What is the rule made from and how does that affect durability? This instrument is made from stainless steel that is fully hardened, then ground and lapped, giving enhanced wear resistance and long-term dimensional stability. Is the 125 mm length suitable for fine mechanical work? Yes, the 125 mm format is ideal for confined workspaces and fine layout tasks where stiffness and repeatability are priorities. How can the product be identified for ordering or inventory? Order and inventory entries can use SKU M214.120.2 and GTIN 4054469106694 to ensure the correct hairline rule is supplied. Can this rule be used in production and quality control environments? The rule’s hardened, ground and lapped finish and DIN 874/00 conformity make it well suited for routine production checks and toolroom inspection Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Hairline Ruler Black Oxide Finish DIN 874/00, Hardened Tool Steel - Metav IndustryLine
Take advantage of the combination of a compact 125 mm working length, hardened tool-steel construction and conformity with DIN 874/00 for a stable reference edge that supports precise layout and inspection tasks; order the hairline ruler directly via Metav Werkzeuge or consult our specialists for technical advice. Hairline ruler 125 mm DIN 874/00 — hardened tool-steel precision rule (Metav IndustryLine) A Hairline ruler 125 mm DIN 874/00 is a compact, hardened tool-steel precision rule intended for workshop measuring, layout and inspection where a stable straight reference is required Hardened, ground and lapped tool steel Complies with DIN 874/00 Compact 125 mm length for fine work Stable reference for fine measurement and layout The compact straightedge is engineered as a precision reference for small components and quick verification tasks. Made from tool steel, fully hardened, ground and lapped, the blade gives a reliably flat datum that reduces measurement uncertainty during visual inspection and scribing. The short 125 mm length combines rigidity with manoeuvrability, making the rule suitable for tool room checks, quality-control benches and fine mechanical workshops. The blackened finish protects the metal surface and improves contrast against engraved or scribed lines, which supports faster, more confident alignment during repetitive tasks. Robust construction for repeatable results in daily use Durability is central to repeatability: the raw material and finishing steps ensure the reference edge resists wear and remains true under normal workshop handling. The hardened tool-steel construction resists nicks and deformation while the ground and lapped surfaces deliver a refined edge suitable for comparative inspection. As a result, the rule performs consistently when used for layout, edge checking or as a sighting aid on small assemblies. The light weight of around 0.1 kg and the compact size facilitate quick transfers between benches and reduce operator fatigue during frequent checks. Practical handling, measurement workflow and care Integration into everyday procedures is straightforward: the precision blade serves as a visual and physical guide for marking, aligning optical measuring devices or verifying straightness. The rule’s size and finish make it well suited for tasks where a full-length straightedge would be unwieldy. Maintenance is minimal — keep the edge free of chips and contamination, store in a protective sleeve or drawer to preserve the lapped surface, and avoid corrosive agents to maintain the blackened finish. For structured inspection routines the rule can be paired with magnified scales or microscopes for improved visual resolution during fine layout operations. For reliable workshop precision choose the Metav IndustryLine hairline ruler—contact Metav Werkzeuge for current availability and delivery from Emmerich Technical data SKU: M214.020.2 GTIN: 4054469106090 Category: Rulers Facts Length: 125 mm Weight: 0.1 kg Tariff code: 90173000 Materials & special features Material: tool steel, fully hardened, ground and lapped, blackened Standard: DIN 874/00 FAQ What is the hairline ruler best used for? The hairline ruler 125 mm DIN 874/00 is designed for fine layout, reference checks and short-range straightness verification in tool rooms and inspection benches. How does the material and finish affect performance? The tool-steel construction, being fully hardened and ground and lapped, provides a wear-resistant reference edge; the blackened finish reduces glare and helps protect against surface corrosion. Is this rule suitable for visual inspection with magnification? Yes — the compact, stable blade is well suited as a datum for magnified visual comparison and fine scribing work where a short, rigid reference is advantageous. How should the ruler be cared for to maintain accuracy? Keep the edge free from nicks and debris, avoid corrosive cleaners, and store the rule in a protective sleeve or drawer to preserve the lapped surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Steel Scriber Rule Blackened, Hardened and Ground According to DIN 874/00 - Metav IndustryLine
Take advantage of the combination of DIN‑standard precision, hardened tool steel construction and a fine hairline edge to speed up layout work and reduce rework. Order the ruler directly via Metav Werkzeuge or contact our advisers for specification guidance. Hairline ruler M214.021 – 150 mm, hardened tool steel (Metav IndustryLine) The hairline ruler M214.021 is a DIN‑874/00 length gauge and scribing aid designed for precise layout and inspection tasks in workshops and toolrooms. DIN 874/00 standard for workshop metrology Fully hardened, ground and lapped tool steel Fine hairline edge for accurate scribing and layout Blackened finish reduces reflections and wear Consistent layout precision for everyday metrology The finely finished hairline edge and adherence to DIN‑874/00 ensure repeatable marking and measurement across routine production tasks. The short 150 mm length provides a balance between reach and rigidity, making it suitable for bench work and small assemblies where uncontrolled flex would reduce accuracy. The result is fewer setup errors and more efficient first‑time fits, supporting measurable improvements in throughput. Robust construction that withstands workshop use Manufactured from fully hardened, ground and lapped tool steel and treated with a blackened finish, the gauge resists abrasion and glare while maintaining a crisp reference edge. This construction translates into long service life under normal workshop conditions and fewer replacements over time. The hardened surface reduces burr formation during scribing, which helps keep tolerances stable and inspection effort minimal. Practical benefits in layout and inspection workflows Compact and straightforward, the ruler integrates easily into standard inspection routines and layout jigs. The plain scale and hairline scribing capability reduce the need for auxiliary marking tools, improving ergonomics and cycle time for repetitive tasks. Where visual contrast is important, the blackened surface improves sighting against bright materials, while the hardened substrate preserves the measuring edge for consistent results. Choose the Metav IndustryLine hairline ruler for precise, durable layout performance and consult Metav Werkzeuge in Emmerich for availability or product matching: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M214.021 GTIN: 4054469106106 Standard: DIN 874/00 Material: tool steel, fully hardened, ground and lapped, blackened Length: 150 mm ECLASS: 21170120 Tariff number: 90173000 Facts Length: 150 mm GTIN: 4054469106106 ECLASS: 21170120 Tariff: 90173000 Special features Blackened finish for reduced reflection Fully hardened, ground and lapped tool steel Fine hairline edge for scribing and layout Conforms to DIN‑874/00 SKU: M214.021 FAQ What applications is this hairline ruler suitable for? The hairline ruler M214.021 is intended for precise layout, scribing and short‑range measuring tasks in workshops, toolrooms and inspection benches. Is the material suitable for heavy workshop use? Yes, the gauge is made from fully hardened tool steel, ground and lapped to maintain a sharp reference edge under normal workshop conditions. How does the blackened finish help during use? The blackened finish on the ruler reduces reflections and improves contrast when sighting the hairline edge against bright or polished parts. Does the ruler comply with recognised standards? The product conforms to DIN‑874/00, ensuring standardised dimensions and reliable reference behaviour for workshop metrology. Can the ruler be used for scribing directly onto workpieces? The fine hairline edge of the M214.021 is designed for accurate scribing; the hardened surface minimises wear and burr formation during marking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Assembly Square Double‑T Aluminium‑Magnesium Alloy With Relief Holes, Grade 1 - Metav IndustryLine
Taking advantage of a lightweight aluminium‑magnesium alloy and a 1500 mm effective length, this assembly rule delivers Grade 1 planar accuracy and consistent reference surfaces for fixture set‑up, alignment and large‑format assembly tasks. Order directly via Metav Werkzeuge or contact our advisors for specification matching. Assembly rule M214.746 — Grade 1, 1500 mm aluminium‑magnesium The Assembly rule M214.746 is an industrial‑grade alignment straightedge designed for precise positioning and reliable reference across medium‑to‑large assemblies. Grade 1 dimensional accuracy 1500 mm effective length Aluminium‑magnesium construction Integrated relief holes for mounting Engineered precision that speeds set‑up and reduces rework The combination of Grade 1 manufacturing and a guaranteed flatness 0.017 mm gives a stable reference for alignment and inspection tasks. This level of planarity minimises adjustment cycles on jigs and fixtures, so production processes become more predictable and efficient. The straightedge acts as a reliable datum for machining set‑ups and assembly benches where reproducible positioning is essential. Stiffness matched to practical handling A measured weight 4.56 kg over the 1500 mm length balances rigidity and manoeuvrability; the profile provides the stiffness required for long runs while remaining manageable during installation. The 100 mm overall height and 40 mm width contribute to a low bending tendency under normal workshop handling, which supports repeatable measurements and alignment without cumbersome lifting equipment. Material performance that sustains accuracy Made from aluminium‑magnesium alloy, the rule combines low mass with predictable mechanical behaviour: yield strength 110 kg/mm², tensile strength 47 kg/mm² and hardness HV 80. These properties reduce the risk of permanent deformation in everyday workshop use and help preserve reference surfaces after repeated mounting or light knocks. The alloy choice also simplifies handling and transport compared with heavier steel alternatives. Practical details for integration into fixtures Built‑in relief holes allow secure fastening to assembly tables, templates or jigs without compromising the reference edge. The specified parallelism 0.022 mm ensures that the opposing faces remain consistent over the length, which is vital for clamping and multi‑point supports. Delivered as a ready‑to‑install straightedge, it fits common fixture workflows in toolmaking, assembly and quality control applications. For specification advice or to reserve a unit of the Metav IndustryLine assembly rule, contact Metav Werkzeuge for tailored guidance and prompt supply from Emmerich. Technical Data Article number: M214.746 GTIN: 4054469184531 Manufacturer: Metav IndustryLine Core specifications Overall length: 1500 mm Overall height: 100 mm Width: 40 mm Weight: 4.56 kg Flatness: 0.017 mm Parallelism: 0.022 mm Hardness: HV 80 Yield strength: 110 kg/mm² Tensile strength: 47 kg/mm² Special features Material: Aluminium‑magnesium alloy Grade: Güte 1 (Grade 1) Relief holes for mounting Category: Ruler FAQ What accuracy class does the rule meet? The assembly rule meets Grade 1 tolerance and is specified with a flatness of 0.017 mm and parallelism of 0.022 mm, providing a precise reference for alignment and inspection tasks. Is this straightedge suitable for fixture alignment on large assemblies? Yes — the Assembly rule M214.746 with its 1500 mm length and engineered stiffness is intended for positioning, jig alignment and assembly tasks where a long, stable datum is required. What material is the rule made from and how does it behave mechanically? Constructed from an aluminium‑magnesium alloy, the rule offers low weight with defined mechanical properties: yield strength 110 kg/mm², tensile strength 47 kg/mm² and hardness HV 80, ensuring durability and resistance to permanent deformation in daily workshop use. How can the rule be secured within a fixture or on a bench? The rule includes relief holes for direct mounting, allowing secure fastening to tables, templates or jigs without affecting the primary reference edges. Which industries or applications is this product aimed at? The product is suitable for toolmaking, fixture construction, assembly lines and quality control where a long, accurate reference is needed for alignment and measurement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Flexible PET Measuring Tape 0.25mm Graduation, Transparent Film Tape - Metav IndustryLine
Take advantage of the combination of flexible PET construction, a fine 0.25 mm graduation and a slim cross‑section to measure long spans with clear, repeatable results; order the flexible PET film scale directly via Metav Werkzeuge or ask our consultants if needed. Flexible PET Film Scale 150 cm — 0.25 mm graduation (Metav IndustryLine) A Flexible PET Film Scale 150 cm designed for measuring distance, length and circumference where a transparent, pliable measure is advantageous in workshops and on-site layout tasks. Transparent, flexible PET film construction Fine 0.25 mm graduation for precise layout 150 cm length for long-span measurements Slim 25 × 0.1 mm cross-section, easy storage Precise long-span layout with fine 0.25 mm graduations The flexible film measure delivers reliable linear readings thanks to its 0.25 mm graduation, which permits detailed marking and transfer of dimensions during layout and pattern work. The clear graduations reduce interpolation error and speed up repetitive tasks, making the tool suitable for technical drawing, textile layout or any application that requires accurate spacing over long spans. The combination of fine scaling and transparent material supports efficient alignment against complex contours and printed guides. Durable PET construction that adapts to complex shapes Manufactured from transparent PET plastic, the measure combines pliability with dimensional stability: the strip conforms to curved profiles while maintaining readable markings. The slim 25 × 0.1 mm cross‑section keeps the weight and bulk minimal for easy handling and storage, yet the film resists common workshop wear when used sensibly. Because the material is transparent, underlying markings remain visible during measurements, which accelerates transfer tasks and reduces handling steps compared with opaque tapes or rigid rulers. Reach and handling tailored for longer components With a measuring range of 1,500 mm (150 cm) this flexible scale falls into the Long category (1,000–2,000 mm), offering the reach required for longer components while remaining manageable by one person. The length is especially practical for carpentry patterns, sheet material layout and measuring circumferences on pipes or ducts where a rigid rule would be impractical. For operations that combine on‑bench and on‑site measurements, the film measure provides a lightweight, low-storage alternative that keeps workflows smooth. For long-span layout tasks and reliable fine graduations, contact Metav Werkzeuge in Emmerich to order the Flexible PET Film Scale 150 cm or request technical advice at info@metav-werkzeuge.com — phone +49 2822 7131930 Technical data Article number: M203.144 Manufacturer: Metav IndustryLine Product: Flexible PET film scale, 150 cm, 0.25 mm graduation Core specifications Measuring range: 1,500 mm Length: 150 cm Graduation: 0.25 mm Cross‑section: 25 × 0.1 mm Features & materials Material: PET plastic, transparent and flexible Measures: distance, length, circumference Slim profile for easy storage Suitable for long‑span layout work FAQ What materials is the scale made from and how does that help in use? The Flexible PET Film Scale 150 cm is made from transparent PET plastic, which provides flexibility for wrapping around curves and clear visibility of underlying marks, aiding precise transfer of dimensions. How accurate is the graduation and what tasks is it suited to? With a 0.25 mm graduation the scale supports fine layout and marking tasks, suitable for textile work, pattern making, carpentry templates and other applications requiring detailed spacing. Is the 150 cm length practical for workshop and on-site use? Yes — the 1,500 mm measuring range places the tool in the Long category (1,000–2,000 mm), giving reach for larger components while remaining lightweight and easy to carry. How should the strip be stored to retain accuracy? Store the film flat or rolled loosely to avoid permanent kinks; the slim 25 × 0.1 mm profile means it fits easily into drawers or tool rolls, reducing the risk of damage in daily use. Which Metav product code identifies this item? The item is listed under SKU M203.144 and can be referenced in orders or enquiries for quick identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Working Rule 40mm Width 5mm Thickness, mm Graduation, DIN 866/B - Metav IndustryLine
Take advantage of a robust 1500 mm measuring length combined with ground special steel construction and a clear millimetre division to ensure repeatable, long-format measurements in production and inspection. Order the working scale directly via Metav Werkzeuge or consult our specialists for application advice. Working scale 1500 x 40 x 5 mm DIN 866/B — industrial steel rule with millimetre division The Working scale 1500 x 40 x 5 mm DIN 866/B is an industrial steel rule designed for long-format measurement tasks in workshops and quality departments, offering a stable profile and standardised millimetre graduations. 1500 mm length for long-format measurements Ground special steel for stable accuracy Millimetre division according to DIN 866/B Designed for workshop and inspection use Reliable long-format measurement for workshop use A long-format measuring rule must combine rigidity with clear graduations; the 1500 mm length of this rule delivers reach without frequent repositioning, reducing cycle times during alignment and inspection tasks. The ground special steel profile resists twist and provides a uniform datum, which supports repeatable readings across the entire span. Clear, DIN-compliant millimetre markings simplify read-off and minimise interpretation errors on the shop floor, making the rule suitable for fixtures, long shafts and sheet-metal layouts. Precision and standardisation that support production workflows Manufactured to DIN 866/B, the scale provides defined graduation geometry and spacing that align with common metrological expectations in industrial environments. This standardisation ensures compatibility with measuring procedures and documentation practices used in production control. The robust, machined surfaces reduce wear and maintain legibility over extended use, contributing to consistent measurement results and lower rework rates. Practical benefits for quality control and layout tasks The combination of a rigid bar cross-section and a fine millimetre division enables both coarse positioning and finer alignment checks without additional tools. The rule’s form factor supports stable placement against edges and reference surfaces, allowing accurate linear reference measurements and step or depth comparisons. For teams that handle long components or series assembly, fewer transfers and simpler setups translate directly into time savings and greater throughput. Built for workshop environments with traceable supply Constructed from special steel and finished by precision grinding, the scale is built to withstand typical workshop handling while preserving its measuring capability. The profile and markings are made for everyday use in machine shops, fettling benches and quality labs. Sourcing through Metav ensures access to a well-stocked European supply chain and the added assurance of a supplier experienced in metrology and workshop equipment. Contact Metav Werkzeuge for tailored advice on integrating this working scale into production or inspection routines and to arrange purchase directly through our Emmerich centre Technical data Article number: M214.716 GTIN: 4054469109589 Tariff number: 90178010 Dimensions: 1500 x 40 x 5 mm Weight: 2.4 kg Facts Material: Special steel, ground Standard: DIN 866/B Division: Millimetre division Label: Arbeitsmaßstab 1500 x 40 x 5 mm DIN 866/B, mit mm-Teilung Special features Suitable for long-format measurements Workshop and inspection use Robust profile for repeatable readings Manufacturer: Metav IndustryLine FAQ What materials is this scale made from? The Working scale 1500 x 40 x 5 mm DIN 866/B is made from special steel, ground, delivering mechanical stability and wear resistance suitable for workshop use. Is the graduation compliant with an industrial standard? Yes, the millimetre division is produced to DIN 866/B, ensuring standardised graduations for consistent documentation and measurement practices. For which applications is this long-format rule intended? This rule is intended for long-format measurements such as fixture setup, shaft and profile alignment, and layout tasks within production and inspection environments where a stable, rigid datum over 1500 mm is required. How does the material and finishing affect repeatability? The ground surface and special steel construction minimise deformation and surface wear, supporting repeatable measurements across the entire length and reducing measurement uncertainty caused by bar twist or marking degradation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Workshop Rule 1500x40x5 With Chamfer, No Graduations - Metav IndustryLine
The combination of a 1,500 mm measuring length, ground special steel construction and a bevelled edge provides a stable, durable reference for large-format layout and machining; order the ruler via Metav Werkzeuge or consult our advisers for specification support. Workshop ruler 1500 x 40 x 5 mm — ungraduated, bevelled edge (Metav IndustryLine) Workshop ruler 1500 x 40 x 5 mm is a long, rigid straightedge for layout, marking and inspection of large components in metalworking and fabrication. 1,500 mm length for large components Ground special steel for stable reference Bevelled edge for precise edge alignment Ungraduated surface for custom marking Reliable reference for large-format layout The long 1,500 mm span makes this straightedge a practical choice when working on sizeable workpieces where a single reference line must be held over a long distance. Manufactured from ground special steel, the rail delivers consistent flatness and rigidity, reducing twist and sag during use. The bevelled edge provides a clear contact line for scribing and alignment against profiles, while the ungraduated format avoids misleading scale errors when a custom layout or partner gauge is preferred. This combination supports reproducible set-ups and lowers rework time in production. Built to withstand the workshop environment A ground finish on special steel improves wear resistance and provides a stable datum surface that resists minor knocks and abrasion in everyday use. The substantial mass — approximately 3 kg — contributes to stability when laying the rule across heavy components without the need for excessive clamping, making it suitable for welding fixtures, assembly benches and machine-shop benches. The construction is aimed at durability and service life rather than fragile laboratory use, so the straightedge maintains its reference quality under normal shop handling. Clear advantages for marking and custom scales The ungraduated surface transforms the rule into a versatile straightedge for scribing, cutting guides and template transfer. Without fixed divisions, the rail becomes the neutral reference for bespoke scales, master patterns or transferred zero lines, enabling one-off manufacturing tasks and jig construction with fewer compromises from printed graduations. The bevel aids visual alignment and gives a firm bearing for scribes and markers, helping to convert precise layout into accurate machine work. Versatile applications across fabrication and maintenance This workshop straightedge suits a range of tasks from layout in structural fabrication to machining set-ups, inspection of flatness on large plates and preparation of long workpieces for drilling or marking. As a robust, ungraduated reference, it complements calipers and micrometers when a continuous datum is required. The design supports both production environments and maintenance bays where dependable, repeatable referencing reduces cycle time and improves overall workflow. For precise large-format layout, specify the Metav IndustryLine workshop ruler with bevelled edge via Metav Werkzeuge — contact our Emmerich team for application advice and delivery details Technical data Article number: M214.726 GTIN: 4054469109657 Tariff number: 90178010 Manufacturer: Metav IndustryLine Facts Length: 1,500 mm Width: 40 mm Thickness: 5 mm Weight: 3 kg Special features Material: Special steel, ground Edge: Bevelled Surface: Ungraduated (without scale) Finish: Ground for stable reference FAQ Is this ruler suitable for layout on large plates and profiles? Yes. The workshop ruler 1500 x 40 x 5 mm provides a long, rigid reference edge designed for layout and marking on large plates, profiles and assemblies in fabrication and maintenance workshops. Does the straightedge include any graduations for direct measurement? No. The surface is ungraduated, which allows the ruler to be used as a neutral straightedge for custom marking, transfer of master lines and setting bespoke scales. What material is the rule made from and why does that matter? The rule is made from ground special steel, offering a wear-resistant, stable datum surface that keeps its flatness under normal workshop use and supports reproducible measurements. Can this ruler be used as a saw or cutting guide? Yes. The bevelled edge and flat, ground surface make the ruler suitable as a straight cutting or scribing guide, provided appropriate clamping is used for safety and accuracy. How does the mass of the ruler affect handling during layout work? At about 3 kg, the ruler’s mass helps keep it stable over larger workpieces, reducing the tendency to move during scribing or marking while still being manageable for single-person use in most shop situations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Workshop Rule 40mm x 5mm, Ground Special Steel - Metav IndustryLine
Reliable, straight and robust: the combination of 1,500 mm length, ground special steel and a 5 mm rigid profile delivers reproducible layout and inspection results; order the Workshop Rule directly via Metav Werkzeuge or ask our consultants if needed. Workshop Rule M214.706 — 1,500 mm straightedge by Metav IndustryLine, ground special steel The Workshop Rule M214.706 is a 1,500 mm straightedge designed for precise layout, inspection and marking tasks in metalworking and general workshop environments. 1,500 mm measurement length Ground special steel construction 5 mm rigid profile Square edges, no chamfer Precision that speeds up workshop routines The long straightedge delivers a consistently flat reference over its full length, making layout and inspection faster and more reliable. Manufactured from ground special steel, the straightedge resists wear and retains flatness under regular use; this reduces the need for repeated adjustment and avoids rework. For machinists and fitters, the clear benefit is improved throughput: fewer interruptions for re-measuring and better repeatability when transferring lines or checking flatness. Robust design for heavy workshop use A 5 mm rigid profile and a fully ground surface create a durable measurement tool that stands up to workshop conditions. The omission of a bevel — described as without chamfer in the product designation — preserves square edges for true edge referencing and enables flush contact on faces and shoulders. This construction makes the rule suitable for repeated layout on plate, checking straightness of assemblies and guiding scribing operations where a precise, unbroken edge is essential. Practical integration and handling At 1,500 mm length the straightedge balances reach and manageability: long enough for large-format assemblies yet light and narrow enough to handle without excessive effort. The workpiece-focused design supports common workshop tasks such as marking, transferring datum lines and using the rule as a reference when aligning parts. The robust surface finish of the ground steel also facilitates easier cleaning and longer service life, supporting a lower total cost of ownership through fewer replacements. For procurement and technical advice on the Metav IndustryLine Workshop Rule M214.706, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored delivery and specifications. Technical data SKU: M214.706 GTIN: 4054469109510 ECLASS: 21170122 Designation: Workshop rule 1500 x 40 x 5 without chamfer Length: 1,500 mm Width: 40 mm Thickness: 5 mm Weight: 3 kg TARIC / CN code: 90178010 Material: ground special steel Edge: without chamfer Category: Lineale Image asset: m214701-main.jpg FAQ What material is the straightedge made from? The Workshop Rule M214.706 is made from ground special steel, chosen for surface flatness and wear resistance suitable for routine workshop use. Is the edge suited for true referencing? Yes — the rule is supplied without chamfer, which maintains square edges for accurate edge referencing and flush contact during layout and inspection. For which workshop tasks is this straightedge intended? The straightedge is intended for layout, inspection, marking and straightness checks on assemblies and sheet or plate work in metalworking and general workshops. How does the length affect usability? At 1,500 mm the rule offers extended reach for larger components while remaining practical for single-person handling in most workshop tasks. Does the rule come with any special surface finish? The product features a ground finish, giving a flat, consistent surface that supports repeatable measurements and longer service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Workshop Rule 40x5mm Bevelled Edge With Millimetre Scale - Metav IndustryLine
Combine robust, precision-ground construction with a clear mm graduation and bevelled edge to speed layout work and reduce re-measurement. Order the workshop ruler directly via Metav Werkzeuge or consult our specialists for application advice. Workshop ruler 1,500 x 40 x 5 mm (M214.736) — Metav IndustryLine, bevelled edge and metric graduation The Workshop ruler 1,500 x 40 x 5 mm (M214.736) is a precision-ground measuring bar intended for workshop layout, machine-room measuring and repeatable alignment tasks across medium to large components. 1,500 mm precision-ground steel rule Bevelled edge for clear reading and alignment Metric mm graduation for direct dimensional checks Stable 3.0 kg construction for repeatable measurement Precise construction that reduces setup time The measuring bar is made from precision-ground special steel, finished to provide a flat, wear-resistant surface that keeps graduations legible over prolonged use. The 1,500 mm length gives a practical reach for layout work while the 40 x 5 mm profile balances stiffness and handling; the listed 3.0 kg mass helps prevent unwanted flex during measurement, improving repeatability on flat components. These design choices result in fewer re-measurements and a more efficient setup process in metalworking and fabrication shops. Clear graduations and bevel for accurate layout A clearly marked mm scale combined with a bevelled face supports quick, unambiguous reading and precise edge alignment against workpieces or straightedges. The ruler is supplied with metric division across its length and a chamfered edge that assists in marking and scribing operations without obscuring the scale. The combination of bevelled edge and ground surface makes the rule suitable for workshop layout, gauge checks and quality-control tasks where visible, stable graduations are essential. Workshop-ready design for everyday industrial use Built for workshop environments, this steel rule integrates into routine measuring tasks, fixture set-up and basic inspection workflows. The construction and size place it in the category of long-format workshop rules that are simple to handle yet robust enough for regular industrial use. The product’s specification supports layout operations on machine tables, panel alignment and component marking, delivering a reliable baseline instrument for engineers and machinists. Backing from a European distribution and quality filter adds supply security for production environments. Contact Metav Werkzeuge for tailored supply of the Metav IndustryLine workshop ruler (M214.736) and expert advice on integrating this tool into production workflows Technical data Article number: M214.736 GTIN: 4054469109725 Brand: Metav IndustryLine Dimensions & mass Length: 1,500 mm Width: 40 mm Thickness: 5 mm Weight: 3.0 kg TARIC / customs code: 90178010 Special features Material: precision-ground special steel Bevelled/chamfered edge for marking and alignment Metric mm graduation across full length Category: rulers (workshop measuring bar) FAQ What materials is the ruler made from and how durable is it? The workshop ruler is manufactured from precision-ground special steel, offering a durable, wear-resistant surface suitable for everyday workshop use; its ground finish helps maintain legibility of the mm graduation. Is the scale metric and readable along the whole length? Yes, the product features a full-length mm graduation, designed for clear visibility and consistent measuring over the entire 1,500 mm span of the ruler. Is this ruler suitable for machine set-up and layout tasks? The Metav IndustryLine workshop ruler (M214.736) is intended for workshop layout, machine-room measuring and fixture alignment where a long, stable metric rule supports repeatable setup. How heavy is the ruler and does the weight affect measurements? The measuring bar weighs approximately 3.0 kg; this mass increases stability during measurement and reduces flex, improving repeatability when laying out or scribing on flat materials. Does the ruler include any certification or special calibration? No specific calibration certificate is supplied with this workshop ruler; it is specified as a precision-ground tool for layout and measuring tasks rather than a calibrated inspection device. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Blade Steel Razor Edge Rule, Hardened and Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of a hardened, ground and lapped stainless-steel measuring edge combined with DIN 874/00 conformity for repeatable workshop measurements; the compact 150 mm format ensures easy handling and rapid checks. Order the ruler via Metav Werkzeuge or consult our specialists for application advice. Haarlineal INOX 150 mm DIN 874/00 — stainless-steel hairline rule, hardened and lapped (Metav IndustryLine) Haarlineal INOX 150 mm DIN 874/00 is a compact, fully hardened and finely finished stainless-steel hairline rule designed for precision marking and short-range measurement in workshop and inspection tasks. Hardened stainless-steel construction Ground and lapped measuring faces Conforms to DIN 874/00 Compact 150 mm length Consistent, wear‑resistant measuring surface for repeatability The hardened stainless steel body provides a wear‑resistant edge that maintains dimensional integrity under frequent use. The ground and lapped measuring faces reduce surface roughness and ensure flatness across the scale, which translates directly into repeatable measurements and lower long‑term drift compared with untreated rules. Conformity to DIN 874/00 gives a clear normative basis for quality processes, enabling straightforward integration into routine checks and documentation workflows. Compact size that speeds up everyday tasks A 150 mm length places this instrument in the compact class for quick shop‑floor checks, fixture set‑ups and fine mechanical work. The short format improves handling and reduces the risk of bend or twist during single‑handed operation, while the fine measurement edge is suitable for marking and referencing small parts. The compact design means the rule is easily stored in a tool drawer or pocket, supporting efficient workflows where accessibility and speed matter. Designed for practical quality assurance and traceability Supplied under the Metav IndustryLine range, this rule is provided with a clear SKU: M214.121 and traceable GTIN: 4054469106700, supporting stock management and compliance checks. The combination of normative conformity and robust finishing makes the instrument ideal for everyday inspection tasks, layout work and repeat controls. The fine measuring edge is especially useful where clear visual reference lines are required; the finishing treatments reduce burrs and enable crisp marking. Metav’s focus on accessible precision means the instrument combines workshop durability with reliable metrological fundamentals. Contact Metav Werkzeuge in Emmerich for tailored advice and supply of Metav IndustryLine precision rulers and measuring equipment Technical Data SKU: M214.121 GTIN: 4054469106700 Commodity code: 90173000 Brand: Metav IndustryLine Facts Length: 150 mm Standard: DIN 874/00 Material: Stainless steel (INOX), fully hardened, ground and lapped Special features Hardened measuring edge Ground and lapped surfaces for flatness Category: Rulers (Lineale) Eclass: 21170120 FAQ What materials is this rule made from and how does that affect durability? The Haarlineal INOX 150 mm DIN 874/00 is made from stainless steel, fully hardened and finished by grinding and lapping, which increases wear resistance and preserves the measuring edge during frequent use. Is this ruler suitable for official inspection routines? The ruler complies with DIN 874/00, providing a normative reference that supports routine workshop inspections and quality checks; traceability is assisted by the GTIN and SKU. Can the instrument be used for marking and layout work on small parts? Yes, the fine measuring edge and compact 150 mm format make the instrument well suited to precise marking and short‑range layout tasks in metalworking and assembly. Does the delivery include a calibration certificate? A specific calibration status is not stated for this item; the specification lists normative conformity to DIN 874/00, but no calibration certificate is mentioned in the product data. Which Metav range supplies this product and how does that benefit procurement? This item is part of Metav IndustryLine, which focuses on accessible, workshop‑grade precision tools; the listing includes SKU M214.121 and GTIN 4054469106700 for straightforward procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Flexible Bending Scale Double-Sided Graduations 0.5/1mm Stainless Steel - Metav IndustryLine
Benefit from the flexible stainless-steel construction and the dual-sided graduations (top 1/2 mm, bottom 1 mm) for accurate, repeatable linear measurements on curved or confined surfaces; order the ruler directly via Metav Werkzeuge or consult the specialists for application advice. M214.191 Flexible Stainless-Steel Ruler — Dual-Scale 150 x 13 x 0.5 mm (Metav IndustryLine) A flexible M214.191 stainless-steel ruler engineered for precise linear measurement on curved, narrow or irregular surfaces in workshop and inspection environments. Flexible stainless-steel construction Dual-sided scales: 1/2 mm and 1 mm Compact 150 x 13 mm profile Ideal for curved and confined measurements Accurate measurements where rigid rulers fail The flexible profile and narrow cross-section make this ruler particularly suitable for measurements on curved or confined surfaces where a rigid bar would lose contact. The dual-sided scale provides both fine and quick-reading options: the top 1/2 mm graduation allows more detailed indication for close-tolerance checks, while the bottom 1 mm division speeds up general alignment and lay-out tasks. The combination of flexible design and clear graduations reduces interpolation error and accelerates routine checks in production and maintenance contexts. Readability and handling tailored for workshop use With a slim cross-section of 13 x 0.5 mm and a measuring length of 150 mm, the ruler balances tactile control and visibility. The stainless-steel surface resists wear, preserving the legibility of the etched scale over repeated use. The compact format is easy to manoeuvre into fixtures and between assemblies, enabling consistent measurements without complex setups. Markings on both sides support different reading conventions and production workflows, making the tool versatile for inspection benches and fabrication stations. Robust material and compact dimensions for long service life Manufactured from stainless steel, the solid yet thin profile resists corrosion and maintains flatness under typical workshop stresses, ensuring long-term traceability of results. The lightweight construction (approx. 0.01 kg) simplifies handling and storage while the narrow width facilitates measurements in tight gaps. The flexible execution helps the ruler conform to contours without permanent deformation, retaining its measuring accuracy and extending the service life of the instrument under normal working conditions. Order the Metav IndustryLine flexible ruler via Metav Werkzeuge for dependable, space-saving measurement capability in production and inspection — for further technical clarification contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M214.191 GTIN: 4054469107127 Material: stainless steel Dimensions: 150 x 13 x 0.5 mm Weight: 0.01 kg Tariff number: 90178010 Facts Measuring range: 0–150 mm Cross-section: 13 x 0.5 mm Net weight: 0.01 kg ECLASS: 21160101 Special features Flexible design Double-sided scale — top 1/2 mm, bottom 1 mm Compact profile for curved and confined measurements Brand: Metav IndustryLine Category: Rulers FAQ What materials is this ruler made from? The M214.191 is made from stainless steel, chosen for corrosion resistance and long-term legibility of the engraved scale. Is the scale suitable for precision work? The double-sided graduations (top 1/2 mm, bottom 1 mm) on the M214.191 allow finer reading where required and faster coarse measurement when precision demands are lower. Can the ruler be used on curved surfaces? Yes — the flexible execution of the M214.191 is specifically intended for curved or confined surfaces where a rigid ruler would not maintain full contact. What is the measuring range and profile size? Measuring range is 0–150 mm with a cross-section of 13 x 0.5 mm, offering a compact balance between reach and handling. Is this ruler suitable for workshop layout and inspection tasks? The compact, robust format and clear dual graduations make the M214.191 well suited to layout, alignment and inspection tasks in workshop and maintenance environments. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Frame Tape Measure LBM 1000 Steel 30m Band Width 13mm, Metric - STABILA
Take advantage of a durable steel band and a long 30 m reach for efficient on-site measuring; the compact frame design and clear millimetre scale support fast, reliable measurements. Order the frame tape measure directly via Metav Werkzeuge or contact our consultants for tailored advice. LBM 1000 STEEL frame tape measure — 30 m, 13 mm steel band The LBM 1000 STEEL is a robust frame tape measure designed for construction and workshop applications where long-range, stable measurement in millimetres is required 30 m steel tape for long-range measurement 13 mm band for stable measurements Steel band resists kinking and wear Class II accuracy for reliable readings Long reach and consistent accuracy for demanding jobs This frame tape delivers a 30 m measuring range combined with a class II accuracy classification, making it suitable for both site layout and workshop tasks where repeatable results are essential. The steel band provides a straight, tension-stable line over long distances, reducing sag and readjustments. With a 13 mm band width the tape remains rigid during extension, which shortens measuring time and increases throughput on repetitive tasks. The clear mm graduation on the scale supports precise readings and simple documentation of dimensions for quality control. Designed for durability and clear, error‑free readings The open-frame design protects the winding mechanism while keeping overall weight low for easy handling on ladders or scaffolds. The steel band resists abrasion and kinking, extending the service life compared with thinner, lacquered tapes. The specification "measurement start B" ensures consistent zero reference when measuring from the frame edge, which aids fast verification of offsets and step measurements. The robust construction reduces downtime due to tape replacement and supports sustained productivity in harsh jobsite conditions. Practical benefits for workshops and site teams A compact frame tape like this simplifies logistics: fewer tools are needed for long-distance measurement tasks and measurements can be recorded directly in millimetres for CAD or production transfer. The durable materials and straightforward scale decrease the risk of measurement errors, which protects project schedules and reduces rework. For businesses seeking reliable measuring equipment from a trusted supplier, this frame tape complements a quality‑focused toolset and integrates well with standard metrology practices on site and in the workshop. Contact Metav Werkzeuge for procurement advice or to arrange delivery from Emmerich — expert guidance is available for application-specific selection and supply Technical Data Article number: 8000911850NW SKU: 8000911850NW Model: LBM 1000 STEEL Type: frame tape measure Brand: STABILA Dimensions & measurables Tape length: 30 m Scale division: mm Band width: 13 mm Features & materials Steel band Measurement start: B Class: EG II Packaging unit: 1 FAQ What is the usable measuring length of this frame tape? The LBM 1000 STEEL provides a usable measuring length of 30 m (SKU 8000911850NW), suitable for long-range layout and workshop tasks. Is the band material suitable for rugged site use? Yes, the steel band on the LBM 1000 STEEL is designed to resist kinking and abrasion, making it robust for frequent outdoor and workshop use. What precision can be expected from this tape? The frame tape is specified to EG II (class II) accuracy; the LBM 1000 STEEL therefore offers reliable millimetre readings for typical construction and metrology tasks. How does the measurement start "B" affect readings? Measurement start B provides a defined zero point at the frame edge, ensuring consistent reference for internal and external measurements with the LBM 1000 STEEL. Is this tape suitable for layout and production transfer? Yes, the combination of a clear mm scale, a rigid 13 mm band and a 30 m reach makes the LBM 1000 STEEL appropriate for both site layout and workshop measurement transfer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Measuring Tape BM 150 Compact Break-Resistant Case Metric Scale EG II Accuracy - STABILA
Benefit from a robust ABS/TPE housing together with a clear metric scale for fast, repeatable measurements; the compact design and sliding brake make it ideal for daily trade use. Order the BM 150 directly via Metav Werkzeuge or contact our consultants for tailored advice. BM 150 Pocket tape measure — 3 m, 16 mm, STABILA The BM 150 is a compact pocket tape measure for tradespeople and window fitters, offering a clear metric scale, an interior-reading window and EG class II accuracy for dependable on-site measuring. Compact, break-resistant tape housing Metric scale with interior-reading window Sliding brake for precise fixation Metal belt clip for secure attachment Reliable measurement precision for everyday tasks The instrument delivers consistent readings through its metric mm/mm scale and compliance with EG II accuracy class, which means measurements meet the standard tolerances expected for professional use. The 3 m blade with 16 mm width provides a stable, low-deflection profile that reduces errors when measuring longer runs. For users who rely on repeatable results in production or installation, the combination of blade dimensions and accuracy class supports process reliability and faster quality checks. Robust design that protects the scale and extends service life A shock-resistant ABS/TPE housing protects the mechanism from knocks and drops commonly encountered on site, while a resistant band coating preserves the printed scale against wear. The impact-protection of the case lowers downtime and replacement costs, and the hardened construction keeps internal components aligned for longer. This durability translates into fewer interruptions during a shift and a lower total cost of ownership for workshop and site equipment inventories. Practical features that speed up measuring work The tape includes a movable end hook for exact inside and outside measurements and a sliding brake to stop and hold the blade securely in position, simplifying single-handed operation. A dedicated viewing window allows straightforward direct reading of inside dimensions without visual contortions, and red tens on the scale improve readability for quicker value recognition. These design choices reduce measurement time and the risk of mistakes during repetitive tasks. Workplace convenience and secure carrying solution A metal belt clip ensures easy and secure attachment to clothing or tool belts, keeping the tape accessible without occupying hands. The compact footprint and lightweight build mean it fits neatly into a pocket while still offering a 3 m reach. For professionals who move between workstations, this tape measure combines mobility with professional-grade features so that measuring remains efficient and unobtrusive throughout the working day. For professional metric measuring with dependable build quality and a clear scale, contact Metav Werkzeuge to source the STABILA BM 150 or to receive application guidance from our specialists. Technical Data Article number: 4000857982NW SKU: 4000857982NW Type: BM 150 Product: Pocket tape measure Packaging unit: 1 Facts Blade length: 3 m Blade width: 16 mm Scale division: mm/mm Accuracy class: EG II Special features Housing: ABS / TPE Interior-reading window for inside measurements Sliding brake for blade fixation Resistant band coating protecting the scale Movable end hook for exact external and internal measuring Red tens on the scale for improved readability Metal belt clip for secure attachment Suitable for window fitters (EG accuracy class II) FAQ What is the measuring length and width of this tape measure? The BM 150 has a 3 m blade with a 16 mm width, offering a stable profile suitable for professional measuring tasks. Is the tape measure suitable for precise indoor work such as window fitting? Yes, the STABILA BM 150 meets EG II accuracy class requirements and includes an interior-reading window, making it suitable for window fitters and similar precision tasks. How does the sliding brake improve daily use? The sliding brake stops and fixes the blade at the required length, enabling accurate single-handed measurements and preventing accidental retraction during marking or cutting. What materials protect the housing and the scale? The casing is constructed from ABS/TPE for impact protection, and the blade features a resistant coating that preserves the printed scale against wear. Can the tape measure be carried on a belt? Yes, the unit includes a metal belt clip for secure and convenient attachment to a belt or pocket. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Accurate checks with precision straightedges
Precision straightedges are high-accuracy measuring tools designed to verify flatness and straightness across surfaces. Available in several lengths and finished from durable metals, these instruments provide a simple, repeatable method for alignment and inspection in industrial settings.
How precision straightedges work and where they are used
A precision straightedge is laid against a surface to reveal deviations from true flatness or a straight line, with fine graduations enabling careful assessment of run-out and planar error. Typical applications include mechanical engineering, electronics, optics and microscopy, machine tool build and quality control, where reliable visual or feeler-gauge inspection prevents assembly issues and functional failure.
Key advantages that cut waste and speed up production
- high accuracy and stable construction reduce measurement uncertainty and help maintain production tolerances.
- stainless steel or other precision metals ensure long service life and corrosion resistance.
- fine graduations and etched scales allow precise readings and repeatable checks.
- various lengths suit bench work as well as larger components, shortening setup time.
- simple handling lowers inspection time and contributes to fewer rejects and rework.
Why Metav is the practical choice for precision straightedges
Metav combines decade-long expertise with a broad range of measurement tools, making it a pragmatic partner for workshop and production buyers. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav operates from Emmerich as a quality filter for the european market, offering consistent availability and straightforward order processing. For those seeking a reliable source of precision straightedges and complementary measuring instruments, Metav’s range and technical information help select the correct specification for the intended inspection task.
In brief
Precision straightedges deliver fast, reliable assessments of flatness and straightness across industries, improving quality control and reducing scrap while being simple to use and maintain.
FAQ
What materials are precision straightedges typically made from?
Precision straightedges are commonly manufactured from stainless steel or other precision metals to ensure stability, wear resistance and longevity in industrial use.
In which industries are precision straightedges most valuable?
Precision straightedges are widely used in mechanical engineering, electronics, optics and microscopy, machine tool construction and general quality control where geometric accuracy is critical.
How is a precision straightedge used to check flatness?
Place the precision straightedge on the surface and inspect gaps visually or with feeler gauges; fine graduations and a straight reference edge make deviations from flatness evident for correction or further machining.
Are different lengths available for precision straightedges?
Yes, precision straightedges are offered in various lengths to match bench-top inspections as well as larger component checks, allowing selection of the most efficient tool for each application.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com