Precision rulers for accurate alignment
Precision rulers are specialised measuring tools used to check flatness and straightness in metalworking and inspection processes, providing reliable alignment and verification for assemblies and machined surfaces. They are typically made from stainless steel or precision metals and serve machining, optics, electronics and quality control applications where tight tolerances are required; using a precision ruler improves repeatability and reduces non‑conformances. Common synonyms include straight edge and flatness gauge, and the durable construction alongside fine graduations ensures the tool remains accurate over years of workshop use.
300mm Workshop Rule With Bevel And Millimetre Scale - Metav IndustryLine
Take advantage of precise 300 mm measuring length, a ground special-steel finish and a faceted edge for reliable alignment in daily shop use; order directly via Metav Werkzeuge or consult their specialists for procurement and application advice. Workshop ruler 300 x 40 x 5 — faceted edge, mm graduation (Metav IndustryLine) The Workshop ruler 300 x 40 x 5 is a compact, ground measuring rule intended for layout, marking and straightforward dimensional checks in metalworking and general workshop environments. 300 mm measuring range Ground special steel construction Faceted edge for accurate alignment Precision that reduces rework and speeds production The ruler offers a 300 mm measuring span combined with a ground special steel surface and clear mm graduation, delivering consistent readings for layout and quick checks. The faceted edge supports accurate alignment against profiles and edges, which reduces setup time and the risk of repeated work. Built for workshop routines, the gauge translates simple, verifiable dimensions into dependable data for fitting and assembly, so measurements become a reproducible part of the production process rather than an occasional guess. Robust profile for everyday handling and stability With compact dimensions of 300 x 40 x 5 mm, the tool balances reach with stiffness to remain stable during one-handed use and marking tasks. The ground finish resists wear and keeps the graduation legible over many cycles, while the faceted geometry aids clean contact with workpieces. Its low-profile construction is easy to handle and store in a toolbox or lay on a workbench without catching or tipping, supporting smooth workflows and fewer interruptions on the shop floor. Fits into inspection routines and stock management The item is traceable via GTIN: 4054469109671 and listed under Metav IndustryLine, making it straightforward to reference in procurement and quality documentation. As a workshop-grade measuring rule, it is suitable for production checks, marking out and secondary inspection tasks where a robust, easy-to-read scale is preferred over more complex instruments. Availability through Metav ensures consistent supply and the option to consolidate tool purchases for workshop standardisation. For tailored advice or to procure the Metav IndustryLine workshop ruler (SKU M214.731), contact Metav Werkzeuge for specification assistance and order handling at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M214.731 GTIN: 4054469109671 Category: Rulers (Lineale) Dimensions: 300 x 40 x 5 mm Facts Measurement range: 300 mm Tariff code: 90178010 Material: special steel, ground Special features Faceted edge for alignment mm graduation Ground surface for wear resistance FAQ What is the measuring length and format of the ruler? The workshop ruler has a measuring length of 300 mm and a clear mm graduation; it is supplied as a rigid, flat rule ideal for layout and marking tasks. What material is the rule made from and how durable is it? Made from special steel, ground, the rule combines dimensional stability with a wear-resistant finish suited to frequent workshop use. Is this ruler suitable for marking and edge alignment? Yes — the faceted edge and flat profile make the tool well suited to marking out and aligning against edges during fitting and assembly operations. How is the product identified for procurement and documentation? The product is listed as Workshop ruler 300 x 40 x 5 under Metav IndustryLine with SKU M214.731 and GTIN 4054469109671 for traceability in purchasing and stock systems. Can the rule be used on the shop floor for routine checks? The construction and legibility of the graduation make the rule practical for routine dimensional checks, quick verification and workshop layout duties. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x40x5 mm Workshop Rule With Chamfer, Ungraduated, Hardened Ground Special Steel - Metav IndustryLine
Take advantage of a compact, durable workshop rule that combines a 300 x 40 x 5 mm hardened profile with a ground special steel finish and a chamfered edge for precise scribing; order the ruler directly via Metav Werkzeuge or ask our consultants if advice is required. Workshop Ruler M214.721 — 300 x 40 x 5 mm, chamfered and ungraduated (Metav IndustryLine) Workshop Ruler M214.721 is a robust reference rule intended for layout, marking and fixture alignment in metalworking and general workshop environments, offering a chamfered edge for clean scribe lines and an ungraduated profile for bespoke marking tasks. 300 x 40 x 5 mm robust profile Ground special steel construction Chamfered edge for precise scribing Ungraduated for tailored marking work Precise layout and repeatable reference for workshop use The compact 300 x 40 x 5 mm profile delivers a stable reference bar that is easy to position and hold during layout operations. Manufactured from ground special steel, the rule resists wear and maintains a flat face for reliable contact with workpieces. The absence of pre-etched graduations makes this profile ideal where bespoke markings or fixture-dependent references are required rather than fixed measurement increments. In production environments, the combination of a solid cross-section and a ground finish reduces play at the contact surface, which supports repeatable scribing and alignment tasks during fixture set-up and part machining. Edge geometry engineered for clear markings and practical handling A chamfered edge provides a defined bevel for scribing and prevents burrs from catching against the workpiece; this geometry aids in drawing precise layout lines while protecting the operator’s hand and the rule’s edge from inadvertent damage. The rule’s finished edges also simplify clamping and seating against straight edges or guide rails. For workshops that prioritise quick, accurate marking over direct measuring, the ungraduated profile supports custom templates and fixtures without visual clutter, while the machined surfaces help maintain straightness over prolonged use. Robust construction that supports efficient workflows The combination of a dense steel body and a ground surface reduces the need for frequent dressing or replacement, contributing to lower lifetime maintenance requirements. The heavy-duty nature of the profile makes it suitable as a stable datum for assembly jigs and layout tables, supporting quicker set-up times and fewer alignment checks. Supply chain reliability is supported by Metav IndustryLine’s distribution: sourcing this reference rule from a single industrial supplier simplifies procurement and ensures consistent quality across batches — an advantage for workshops aiming to standardise tooling and reduce variability in routine processes. Contact Metav Werkzeuge in Emmerich for stock availability and tailored advice on the Metav IndustryLine workshop ruler (M214.721); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M214.721 GTIN: 4054469109602 Dimensions: 300 x 40 x 5 mm Material: Special steel, ground Facts ECLASS: 21170122 Tariff code: 90178010 Manufacturer: Metav IndustryLine Special features Chamfered edge Ungraduated (no scale) Image available: m214721-main.jpg FAQ What is the primary use of this workshop ruler? The Metav IndustryLine Workshop Ruler M214.721 is intended as a stable reference and scribing aid for layout, fixture alignment and marking tasks in workshops and machine shops. Can the rule be used for precision dimensional measurement? As the rule is supplied ungraduated, it serves best as a reference datum and scribing guide rather than a direct measuring instrument with engraved increments. What advantages does the ground steel finish provide? A ground special steel finish improves flatness and wear resistance, ensuring the reference face remains true for repeatable layout and alignment activities. Is the chamfered edge suitable for scribing and template work? Yes, the chamfered edge creates a clean bevel for precise scribe lines and simplifies clamping against straight edges or guides during template transfers. Which workshop environments benefit most from this profile? The robust 300 x 40 x 5 mm profile is suited to metalworking shops, toolrooms and production cells where reliable reference bars are required for assembly, marking and fixture set-up tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Scale Magnifier With Guided 10x Lens, Parallax-Free Reading, Stainless Steel, Case - Metav IndustryLine
Take advantage of the combination of parallax‑free reading, 10× guided magnification and robust stainless steel construction for dependable layout and inspection work; order directly via Metav Werkzeuge or consult our advisors for specification support. Ruler magnifier — stainless steel measuring ruler with guided loupe, 10× magnification (Metav IndustryLine) The Ruler magnifier is a workshop measuring aid with an integrated guided loupe designed for precise visual checks and layout tasks in metalworking and inspection environments Stainless steel construction 10× guided magnifier Parallax‑free reading Measuring range 0–400 mm Precise, repeatable readings for quality control The guided loupe and parallax‑free scale enable clear, reproducible readings that reduce interpretation errors during layout and inspection. With a stated accuracy of ±0.02 mm and a scale division of 0.1 mm, the instrument meets workshop demands where traceable repeatability is required. The combination of a magnified view and precise graduation accelerates inspection routines and supports reliable mark‑making on workpieces, which translates directly into fewer reworks and a smoother production flow. Robust construction and medium‑range handling Constructed from stainless steel, the device resists workshop wear and maintains straightness over time, helping to keep measurements consistent. An overall length of 450 mm accommodates comfortable two‑hand guidance while the actual measuring range of 0–400 mm places this instrument in the medium (300–500 mm) category — a practical compromise between reach and rigidity for fixtures, housings and medium‑sized components. The tool is supplied in a transport case for safe storage and transit, protecting the scale and loupe between use. Magnified inspection that speeds decision making The 10× guided magnifier brings fine edges, scribe lines and surface details into sharp focus so decisions about fit, finish and next operations can be made at the bench rather than on the machine. Faster visual checks reduce cycle times in incoming inspection and during in‑process control. The guided mounting keeps the magnifier aligned with the scale for consistent observation, improving operator confidence and reducing subjective judgement in critical checks. Choose Metav IndustryLine’s ruler magnifier for dependable, workshop‑ready precision and contact Metav Werkzeuge for tailored advice or to place an order by e‑mail or phone Technical data Article number: M903.208 GTIN: 4061905448973 Manufacturer: Metav IndustryLine Facts Measuring range: 0–400 mm Overall length: 450 mm Accuracy: ±0.02 mm Scale division: 0.1 mm Magnification: 10× Features Material: stainless steel Parallax‑free reading Supplied in transport case Category: Rulers (Lineale) FAQ What level of accuracy does this measuring ruler offer? The ruler magnifier from Metav IndustryLine provides an accuracy of ±0.02 mm, suitable for general workshop inspection and many quality‑control tasks. Is the magnifier fixed or adjustable? The guided loupe is mounted to maintain alignment with the scale; its guidance simplifies adjustment for repeatable inspection without losing sight of the graduation. Which measuring range classification applies to this instrument? With a measuring range up to 400 mm, this device is classified in the medium range (300–500 mm), balancing reach and rigidity for standard machine‑shop applications. Does the delivery include protective packaging? Yes, the instrument is supplied in a transport case to protect the stainless steel scale and magnifier during storage and transport. What is the product SKU for ordering and reference? Order reference SKU M903.208 (Metav IndustryLine) should be used when enquiring or placing orders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Steel Ruler Black Oxide, Hardened, Ground And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of the combination of DIN-compliant straightness, hardened tool-steel construction and a low-reflection finish for dependable inspection and layout work; order the instrument directly via Metav Werkzeuge or contact their consultants for application advice. Hairline straight edge 400 mm — DIN 874/00, hardened tool steel, blackened finish (Metav IndustryLine) Hairline straight edge 400 mm DIN 874/00 is a precision reference for inspection, alignment and layout tasks in workshop and production environments DIN 874/00 accuracy standard Fully hardened, ground and lapped Blackened finish for glare reduction 400 mm measurement length Reliable reference for inspection and setup The combination of DIN 874/00 conformity and a finely finished edge provides a reproducible datum for visual inspections and machine setup. Conformance to the standard indicates that straightness and edge quality meet established tolerances, which reduces measurement uncertainty and supports consistent quality control. Using a certified straight edge as the reference reduces rework and speeds up inspection routines, making processes measurable and repeatable with professional rigour. Robust construction for long service life Manufactured from tool steel that is fully hardened, ground and lapped, the instrument resists wear at the contact edge and retains its geometry under normal workshop use. The blackened surface minimises glare under shop lighting and offers additional surface protection against surface corrosion. The ground and lapped finishing steps ensure a uniformly flat reference face; in practical terms this means fewer adjustments and a longer interval between checks, delivering lower total cost of ownership for routine inspection equipment. Practical handling and workshop integration With a mid-length measuring span of 400 mm, the straight edge balances reach and rigidity for everyday tasks such as checking planeness, aligning guides and verifying machined faces. The slim hairline edge assists in precise visual alignment without obscuring the workpiece, while the robust body keeps the edge stable during use. For buyers who require further technical clarification or measurement planning, Metav provides straightforward application advice so the tool can be integrated reliably into existing inspection routines. For procurement or technical guidance on the Metav IndustryLine hairline straight edge, contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.024 GTIN: 4054469106144 Standard: DIN 874/00 Length: 400 mm Facts Tariff number: 90173000 Grade: 00 Special features Material: tool steel, fully hardened, ground and lapped Finish: blackened (schwarz bruniert) Category: Lineale Label: Hairline straight edge 400 mm DIN 874/00, blackened FAQ What applications suit this straight edge best? The hairline straight edge 400 mm DIN 874/00 is intended for inspection, alignment and layout tasks where a stable, low-reflection reference is required; it is suitable for workshop and production checks. How does the blackened finish affect use? The blackened finish on the Metav IndustryLine straight edge reduces glare and offers surface protection, improving visibility of the hairline edge during precision alignment. What does the DIN 874/00 designation mean for accuracy? DIN 874/00 indicates that the straightness and edge quality meet the recognised standard for straight edges, providing a documented basis for consistent inspection results with this Metav IndustryLine tool. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Steel Straight Edge, Hardened And Ground, DIN 874/00 - Metav IndustryLine
Take advantage of a hardened, stainless steel reference surface and conformity to DIN 874/00 to secure consistent inspection results and minimise rework on the shop floor. Order the straightedge directly via Metav Werkzeuge or consult our advisors if further application guidance is required. Precision straightedge INOX 400 mm DIN 874/00 — hardened stainless steel, ground & lapped (Metav IndustryLine) The Precision straightedge INOX 400 mm DIN 874/00 is a hardened stainless steel straightedge designed for workshop inspection, layout and comparative flatness checks across mechanical and toolroom applications. Hardened stainless-steel construction Ground and lapped reference surfaces Conforms to DIN 874/00 standard Ideal 400 mm length for bench inspection A stable reference for repeatable inspection results The straightedge serves as a reliable reference surface for visual and tactile flatness checks, alignment tasks and setup verification. Manufactured in stainless steel that is fully hardened, then ground and lapped, the tool resists wear and preserves its geometry under normal workshop use. Conformance to DIN 874/00 provides a standardised basis for comparative measurements, which simplifies acceptance criteria and reduces ambiguity during quality control. Durability and measurement integrity reduce downtime Because the material is fully hardened and the bearing faces are finely finished, the instrument maintains its nominal geometry over repeated use. The hardened substrate and precision finishing mean fewer re-grinds and longer intervals between servicing, supporting greater repeatability when checking straightness, squareness and reference edges. For machine shops and maintenance teams, this translates into fewer measurement-related delays and more predictable production throughput. Practical format for everyday workshop tasks The compact 400 mm length combines sufficient reach with convenient handling for bench inspection, layout work and small-assembly verification. The flat, lapped faces ensure clear contact for light-table checks or feeler-gauge comparison, while the robust finish simplifies cleaning and corrosion resistance in normal environments. Supplied as a ready-to-use inspection tool, the straightedge is suitable for use in toolrooms, maintenance departments and inspection benches where a hardened, stable rule is required. Speak to Metav Werkzeuge for tailored advice on the hardened stainless-steel straightedge and to secure stock from our Emmerich warehouse. Technical data SKU: M214.124 GTIN: 4054469106748 Manufacturer: Metav IndustryLine Standard: DIN 874/00 Facts Length: 400 mm ECLASS: 21170120 Tariff number: 90173000 Special features Material: Stainless steel, fully hardened, ground and lapped Category: Lineale FAQ What accuracy standard does this straightedge meet? The answer: The Precision straightedge INOX 400 mm DIN 874/00 is manufactured to the geometry specified by DIN 874/00, providing a standardised reference for routine flatness and alignment checks. Can the straightedge be used directly on machine beds and guideways? Yes. The straightedge’s hardened, ground and lapped faces make it suitable for comparative checks on bedways and guideways where a compact, rigid reference of 400 mm is appropriate. How should the tool be maintained to preserve its reference surface? Regular cleaning and storage in a dry environment are recommended; avoid coarse abrasives. The hardened and lapped finish resists wear, which helps retain the straightedge’s reference condition. Is the straightedge suitable for workshop inspection and toolroom calibration? The straightedge is intended for workshop inspection and layout tasks; for formal calibration procedures, consult Metav Werkzeuge for recommended calibration services and intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Tape Measure, Case 19 mm Steel Blade, Locking, Belt Clip - Metav IndustryLine
Take advantage of a robust combination of proven accuracy, compact handling and site-ready features: the compact M203.111 pocket tape delivers consistent readings with an EC accuracy class II tolerance and a 5 m × 19 mm steel tape in a resilient ABS housing; order directly via Metav Werkzeuge or contact our advisers for specification support. M203.111 pocket retractable tape measure — 5 m × 19 mm, ABS housing The M203.111 pocket retractable tape measure is a compact, workshop-grade measuring tool designed for general construction, metalworking and everyday site tasks, combining a steel measuring tape with a belt clip and positive-lock mechanism for fast, repeatable measurements. Durable ABS housing with belt clip Steel measuring tape 5 m × 19 mm Accuracy class II for reliable readings Positive-lock mechanism for fast measuring Dependable accuracy where it matters The pocket tape offers an EC class II accuracy rating, which means tolerances are suitable for most construction and workshop applications that require reliable, comparable results. The 5 m length and 19 mm tape width balance reach and stiffness, keeping the blade stable on longer spans and reducing sag. This makes the tool an efficient alternative to longer rulers for routine layout and verification tasks, allowing for quick verification of dimensions without complex setups. Built for daily use and straightforward handling Encased in a tough ABS housing, the measuring tape is light at approximately 0.21 kg, enabling easy one-handed operation and comfortable carry on site. The steel tape provides abrasion resistance and maintains clear graduation marks under frequent use. A mechanical positive-lock holds the blade securely during measurement, while the integrated belt clip keeps the tool accessible on the move—features that reduce handling time and limit measurement interruption in busy work environments. Practical features that speed up workflow The tape’s width and blade material contribute to a clear reading edge and reduced flex when extended, which supports faster, more accurate single-person measurements. The lock mechanism permits controlled retraction, protecting the blade and extending service life. The combination of durable construction, portable design and standardised accuracy makes this tape an economical choice for trade professionals and workshops that require a dependable, everyday measuring tool. For reliable site measurements choose the Metav IndustryLine M203.111; contact Metav Werkzeuge in Emmerich for procurement and technical advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M203.111 GTIN: 4054469181714 Brand: Metav IndustryLine Weight: 0.21 kg Facts Measuring range: 0–5,000 mm (5 m) Tape width: 19 mm Accuracy: Class II Special features ABS housing Steel measuring tape Belt clip Positive-lock mechanism EC class II accuracy FAQ Is this tape measure suitable for construction work? The M203.111 pocket retractable tape measure is well suited to construction and site use thanks to its 5 m range, 19 mm blade and EC accuracy class II rating. How is the tape held in place during measurement? A positive-lock mechanism secures the extended steel tape, enabling stable measurements and controlled retraction for the M203.111. What materials protect the tape and housing? The measuring blade is made of steel for wear resistance and the casing is made from robust ABS, both chosen to withstand everyday workshop use. Can the tape be worn on a belt or pocket? Yes, the device includes an integrated belt clip so the tape can be kept immediately to hand during tasks. What level of precision can be expected from this tool? With accuracy class II, this tape provides reliable readings for most workshop and site applications where standardised tolerances are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Twist Tape Measure 19 mm Nylon-Reinforced Double-Sided mm Scale Magnetic End Hook Locking Belt Clip, Class II - Metav IndustryLine
Take advantage of a compact, durable measuring tool with a double-sided metric scale and a magnetic end hook for faster, single-person measurement. Order the tape measure directly via Metav Werkzeuge or contact our consultants for tailored advice. Pocket Retractable Tape Measure M203.131 – 5 m, 19 mm, double‑sided nylon‑reinforced steel tape (Metav IndustryLine) A Pocket Retractable Tape Measure M203.131 that delivers fast, reliable site and workshop measurements with a double‑sided scale and secure locking mechanism Double-sided metric scale for quick reading Nylon-reinforced 19 mm steel tape for durability Magnetic end hook and secure lock ABS housing with belt clip, Class II accuracy Faster single-person measuring on site and in the workshop The double-sided metric scale allows reading from either side, reducing handling time and keeping workflows moving. With a 5 m reach and a 19 mm wide tape, measurements are stable over distance and the magnetic end hook supports single‑handed anchoring to ferrous edges. These features combine to shorten task duration and lower the risk of rework, making the measure well suited for fitting, carpentry and general assembly. Built for continuous use: resilience meets low weight The tape is a steel strip reinforced with nylon, which protects the scale from abrasion and resists kinking during repeated extension. Housed in an ABS casing and equipped with a robust belt clip, the unit is easy to carry and quick to access on busy jobs. At approximately 0.23 kg, the measure balances solidity with portability so that mobility across the workshop or site is not compromised. Accuracy and conformity for everyday quality control Designed to meet accuracy Class II, the measure provides measurement certainty appropriate for many industrial and trade applications. The integrated locking mechanism secures readings for transfer to templates or drawings, reducing human error during marking. This combination of reliable repeatability and practical handling supports standard quality checks without requiring specialist instruments. Practical operation and low-maintenance use The low-friction nylon coating on the tape simplifies rewinding and prolongs service life, while the magnetic end hook minimises slippage on metal edges. The secure lock keeps the tape extended when measuring across larger components, and the compact housing protects the scale during transport. For busy workshops that need dependably fast measuring, this measure is an efficient everyday tool. Contact Metav Werkzeuge in Emmerich to secure the M203.131 from Metav IndustryLine and benefit from practical, robust measuring solutions — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: M203.131 GTIN: 4054469181776 Manufacturer: Metav IndustryLine Facts Tape length: 5 m Tape width: 19 mm Weight: 0.23 kg Accuracy class: II Special features Double-sided metric scale Nylon-reinforced steel tape Magnetic end hook Locking mechanism ABS housing with belt clip FAQ What length does the tape measure reach? The pocket retractable tape measure M203.131 extends to 5 m, offering a practical range for most site and workshop tasks. Is the tape suitable for one-person measurements on metal parts? Yes. The tape features a magnetic end hook and a secure lock designed to support single‑handed anchoring and stable readings when working on metal components. How durable is the tape surface against wear? The tape is made of steel reinforced with a nylon coating, which increases abrasion resistance and helps preserve the printed metric scale on the M203.131. What accuracy can be expected for routine checks? The measure conforms to accuracy Class II, providing the level of precision typically required for general industrial and trade quality control activities. Does the measure include a belt clip for easy transport? Yes, the unit is supplied with an ABS housing and an integrated belt clip to keep the M203.131 accessible while moving around the workshop or site. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m x 19 mm Tape Measure Nylon-Reinforced Steel Tape Belt Clip, Locking Stop, EU Class II - Metav IndustryLine
Take advantage of the combination of nylon-reinforced steel tape, robust ABS housing and a compact, lightweight design for fast, reliable length measurement on the job. Order the pocket tape measure directly via Metav Werkzeuge or consult our specialists for specification advice. Pocket tape measure M203.121 — Accuracy class II, 5 m x 19 mm (Metav IndustryLine) A Pocket tape measure M203.121 engineered for durable, everyday length measurement in workshops, trades and on-site tasks. Nylon-reinforced steel tape for durability 5 m length with 19 mm tape width ABS housing with secure locking mechanism Integrated belt clip for hands-free carry Built for daily workshop use and long service life The housing combines impact-resistant ABS with a compact shell that protects the nylon-reinforced steel tape from knocks and abrasion. The 19 mm width increases lateral stability during extended spans, while the low 0.23 kg weight keeps the measure unobtrusive in a pocket or on a tool belt. These physical choices reduce wear and lower the frequency of replacements, so measurement capability remains available when it matters most on the shop floor. Precise, standard-compliant measurements for routine quality checks With an accuracy class II rating, the tape provides dependable readings across its full range, making it suitable for typical machine-shop and assembly tasks that require standard-conformance checks. The measuring range from 0 to 5 m covers most layout and installation jobs without switching tools. The broader tape profile improves readability and reduces flutter, which helps keep repeatability high during one-person handling and speeds up pass/fail assessments. Faster work through ergonomic handling and secure retention A positive locking mechanism allows rapid capture of measurements and prevents tape retraction during marking or transfer, saving time on repeated tasks. The integrated belt clip ensures the measure is always at hand, reducing search time between operations. Together these features support smoother workflows and fewer interruptions, which translates into measurable productivity gains for small teams and individual tradespeople. Durable tape material explained for non-specialists The tape core is steel with a nylon reinforcement, which combines the tensile strength of steel with a protective polymer layer that resists rust and surface scratching. This coating lengthens the useful life of the graduations and keeps the end hook operating cleanly. For everyday workshop use, that means fewer measurement errors caused by worn markings and a lower total cost of ownership compared with untreated tapes. For reliable workshop measuring from Metav IndustryLine, contact Metav Werkzeuge for purchase and technical advice—fast supply from Emmerich and direct assistance for specification checks. Technical Data Article number: M203.121 GTIN: 4054469181745 Manufacturer: Metav IndustryLine Facts Measuring range: 0–5,000 mm Tape length: 5 m Tape width: 19 mm Weight: 0.23 kg Accuracy class: II Special features Nylon-reinforced steel tape ABS housing Locking mechanism Belt clip FAQ What measuring range does this tape cover? The pocket tape delivers a measuring range of 0–5,000 mm; the Pocket tape measure M203.121 covers typical workshop and installation tasks up to 5 m. Is the tape durable enough for daily site use? Yes, the tape is a nylon-reinforced steel tape housed in an ABS shell with a locking mechanism, designed for continuous use in workshop and trade environments. How accurate is the measure for quality checks? The tape conforms to accuracy class II, providing reliable readings for routine machine-shop quality control and layout work. Does the product include a clip for carrying? An integrated belt clip is included to keep the measure readily available for hands-free transport during work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 m Twist Steel Measuring Tape 13 mm Double-Sided mm Scale ABS Case - Metav IndustryLine
Take advantage of a 50 m measuring length combined with a reinforced steel tape and EC class II accuracy for reliable long-range measurements on site. The robust ABS housing and double-sided millimetre graduation ensure fast, readable results and durable everyday use. Order the steel tape measure directly via Metav Werkzeuge or consult the technical advisors for application support. Metav IndustryLine Steel tape measure M203.162 — 50 m, 13 mm, double-sided graduation Steel tape measure M203.162 for long-range measuring in construction, surveying and workshop environments; engineered for durability and clear millimetre readings on both sides 50 m reinforced steel tape for long-range measuring Double-sided millimetre graduation for easy reading 13 mm blade width for improved stiffness and handling ABS housing with pistol grip for ergonomic hold Built for dependable long-range measuring on site The 50 m blade is manufactured from steel tape reinforced with nylon, which reduces kinking and improves rewind behaviour compared with plain blade steels. Paired with double-sided graduation, the design eliminates the need to flip the tape for alternate readings, speeding up work on fences, ducts or large assemblies. EC accuracy class II provides a predictable tolerance band that suits building, installation and general workshop measuring tasks where robust reproducibility is required. Durable construction that simplifies daily use An ABS housing protects the mechanism against impacts and dirt while keeping overall weight manageable at 0.97 kg for easy transport between job sites. The 13 mm blade width offers a good compromise between stiffness and portability: the tape resists lateral flex and delivers steady readings over long spans without the bulk of heavier reels. Visible millimetre marks on both faces aid measurement from either side of a profile, reducing repositioning and saving time during repetitive tasks. Practical benefits and suitability for common applications The reinforced blade and clear metric graduation make this tape ideal for landscaping, surveying, plumbing and large‑format fabrication. The combination of long-range measuring capability and a compact, impact-resistant case supports workflows where distance and durability matter more than micrometre-level precision. As a pragmatic tool, it integrates into everyday site kit and complements more precise instruments when rough and repeatable length data are needed. Request product details or a quotation from Metav Werkzeuge for the M203.162 tape measure — our Emmerich team is available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on suitability for specific applications Technical data Article number: M203.162 GTIN: 4054469181844 Brand: Metav IndustryLine Accuracy: EC class II Facts Measuring range: 50 m (0–50,000 mm) Blade width: 13 mm Weight: 0.97 kg Material: steel tape reinforced with nylon Special features Double-sided millimetre graduation ABS housing Category: Line rulers FAQ What is the measuring range of this tape measure? The steel tape measure M203.162 has a measuring range of 50 m (0–50,000 mm), suitable for long spans and outdoor site work. How readable is the graduation on the blade? The blade features a double-sided millimetre graduation so measurements are visible from either face, improving speed and reducing repositioning during tasks. Is the tape suitable for rough job‑site use? Yes. The reinforced steel tape with nylon backing and the ABS housing are designed for durability and impact resistance in workshop and construction environments. What level of accuracy can be expected? This tape conforms to EC class II accuracy, providing consistent, site-appropriate tolerances for general construction and installation measurements. Can the tape be used for measuring curved surfaces or pipes? The reinforced blade handles moderate curvature; for tightly curved profiles a flexible measuring band may be preferable, but this tape offers a robust solution for many pipe and duct measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 m Twist Tape Measure 13 mm Width Double-Sided mm Graduation ABS Case, Class II Accuracy - Metav IndustryLine
Thanks to its long reach, reinforced blade and clear double-sided millimetre graduation, the tape delivers dependable, repeatable measurements on large jobs while remaining easy to handle; combine 50 m range, nylon‑reinforced steel and an ABS impact-resistant housing for robust site performance. Order the steel tape measure directly via Metav Werkzeuge or ask our consultants if needed. Steel Tape Measure M203.152 — 50 m, 13 mm blade, EC Class II (Metav IndustryLine) The Steel Tape Measure M203.152 is a long-range measuring tape designed for site and workshop use, featuring a 13 mm nylon‑reinforced steel blade with a double-sided millimetre scale and a sturdy ABS case. 50 m reinforced steel blade Double-sided millimetre division EC Class II accuracy ABS impact-resistant housing Long reach with site-ready durability A 50 m measuring range makes this tape suitable for large-format tasks such as site layout, duct and pipe runs, and perimeter checks. The 13 mm blade width and nylon‑reinforced steel construction increase straightness and reduce flutter during extraction, which results in faster, more precise measurements over long distances. The ABS housing protects the mechanism from impacts and abrasion on busy worksites, while the moderate mass contributes to stable rewinding and portable handling. Clear graduations and regulatory accuracy for reliable results Equipped with a double-sided millimetre scale, the tape offers good legibility from either side of the blade, aiding quick reading in confined or awkward positions. The designation EC Class II indicates conformity with the applicable accuracy band for general construction and surveying tasks, balancing precision with robustness. For environments where consistent reproducibility matters, the combination of a standardised accuracy class and a rigid blade minimises measurement scatter and supports efficient quality checks. Practical handling and application-focused design Weighing about 1.22 kg, the unit is balanced for single‑person use while remaining durable enough for repeated site handling. The compact case and reinforced blade simplify storage and transport between jobs. This tape is primarily intended for construction, civil engineering and large-scale workshop measurements where a long, tough measuring tape with readable millimetre graduations is required; its materials and build quality favour longevity and low maintenance in everyday professional use. Contact Metav Werkzeuge for tailored advice or to order the Steel Tape Measure M203.152 directly from our Emmerich stock and benefit from our precision‑focused supply chain Technical data Article number: M203.152 GTIN: 4054469181813 Manufacturer: Metav IndustryLine Material: nylon‑reinforced steel blade Housing: ABS Special feature: double-sided millimetre division Facts Measurement range: 0–50,000 mm Blade width: 13 mm Weight: 1.22 kg Accuracy: EC Class II Special features Double-sided millimetre graduation Reinforced steel with nylon coating ABS impact-resistant case FAQ Is the tape suitable for long outdoor measurements? The Steel Tape Measure M203.152 from Metav IndustryLine is designed for long outdoor and site measurements thanks to its 50 m reinforced steel blade and protective ABS case. What does EC Class II mean for everyday use? EC Class II indicates the tape meets the standard accuracy band suitable for general construction and survey tasks; the M203.152 therefore offers reliable repeatability for routine professional applications. Can the graduations be read from both sides? Yes, the double-sided millimetre division on the blade ensures clear readings from either face, which speeds up work in confined or awkward measuring positions. Is the blade reinforced to resist wear and corrosion? The blade is made from nylon‑reinforced steel, combining straightness and abrasion resistance for extended service life on site. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Hairline Ruler Blackened Tool Steel DIN 874/00 - Metav IndustryLine
Reliable construction and DIN‑compliant geometry combine to deliver precise scribing in tight spaces; the hardened, ground and lapped tool‑steel blade ensures repeatable results while the compact 50 mm format suits fine mechanical and watchmaking tasks. Order the hairline ruler directly via Metav Werkzeuge or ask our consultants for specification advice. Hairline ruler M214.018 — 50 mm, fully hardened tool steel (DIN 874/00) The Hairline ruler M214.018 is a compact sighting rule designed for precise scribing and alignment in fine mechanical and workshop applications, meeting the DIN 874/00 specification. Fully hardened tool steel, ground and lapped Complies with DIN 874/00 for hairline rules Compact 50 mm length for micro and fine work Blackened finish reduces glare and corrosion Precise scribing where space is limited Small assemblies and microcomponents demand tools that combine stability with fine geometry. The 50 mm blade, manufactured from fully hardened tool steel and finished by grinding and lapping, provides a consistently flat reference edge that resists wear. Compliance with DIN 874/00 assures a recognised manufacturing and inspection standard, enabling reliable interchangeability with existing measurement procedures. This construction reduces measurement scatter and supports repeatable scribing and alignment tasks in precision workshops. Stability and handling for repeatable results A ground and lapped surface minimises surface irregularities, while the blackened finish reduces reflective glare that can obscure a hairline. In the micro measuring range (max. 10–100 mm) the short blade length maintains torsional rigidity, making the instrument particularly suitable for watchmaking, fine mechanical work and inspection of small parts. The robust steel substrate ensures dimensional stability under normal workshop conditions, translating into fewer rechecks and faster setup times during routine tasks. Low‑maintenance tool built for everyday use The simple geometry and hardened substrate make the ruler inherently durable; routine care consists of keeping the surface clean and lightly oiled to protect the blackened finish. The compact format is easy to store in tool drawers or inspection kits, and the construction avoids fragile features that require special handling. For small teams seeking reliable reference tools, this sighting rule offers a pragmatic balance between longevity and the precision required for fine scribing operations. Secure precise micro‑scribing with Metav IndustryLine’s hardened hairline ruler: contact Metav Werkzeuge in Emmerich for tailored advice, specification checks or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.018 GTIN: 4054469106069 Standard: DIN 874/00 Facts Length: 50 mm Tariff code: 90178090 Special features Material: Tool steel, fully hardened, ground and lapped Finish: Blackened Category: Lineale Suitable range: Micro (max. 10–100 mm) for fine mechanical work FAQ What is the usable measuring length of this rule? The usable blade length is 50 mm; the Hairline ruler M214.018 is therefore classified for micro‑range measurements suitable for fine mechanical tasks. Which material and finish are used? The hairline rule is made from fully hardened tool steel with a ground and lapped surface and a blackened finish to reduce glare and improve corrosion resistance. Is the geometry standardised? Yes, the product conforms to DIN 874/00, ensuring standardised hairline geometry for consistent scribing and alignment. For which applications is this ruler ideal? The compact format and stable construction make the Hairline ruler M214.018 ideal for watchmaking, precision assembly, small part inspection and other fine mechanical work. How should the ruler be maintained? Keep the blade clean and apply light oil to protect the blackened finish; avoid impacts or bending forces to maintain calibration and surface integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Hairline Stainless Steel Straightedge, Hardened And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of the combination of corrosion‑resistant INOX steel, a hardened, ground and lapped finish, and the compact 50 mm length for reproducible fine measurements. Order the hairline rule directly via Metav Werkzeuge or consult our specialists if additional information is required. Hairline rule M214.118 — INOX stainless steel, hardened & lapped (Metav IndustryLine) The hairline rule M214.118 offers a compact, DIN‑conform measuring edge designed for fine marking and verification in precision workshops and quality control. INOX stainless steel, fully hardened and lapped Conforms to DIN 874/00 accuracy standard Compact 50 mm length for micro work Precision class 00 for fine measurements Compact geometry that supports precise micro‑work The short measuring length of 50 mm makes this instrument ideal where rigidity and repeatability matter: the reduced span minimises flex and vibration during handling, which benefits fine‑mechanical tasks such as watchmaking, small component inspection and precision marking. The combination of a compact profile and an accuracy class 00 edge ensures that measurements and scribing lines remain consistent from one part to the next, reducing rework and increasing throughput in small‑batch production. Durable finish and traceable standard compliance Constructed from INOX stainless steel that has been fully hardened, ground and lapped, the rule provides a wear‑resistant measuring face that retains its geometry over prolonged shop use. Compliance with DIN 874/00 gives a clear, standardised reference for quality documentation and incoming inspection routines. The finished surface minimises corrosion and mechanical wear, so the tool maintains its calibration margins longer than untreated alternatives. Everyday benefits in the workshop and inspection bench Lightweight and easy to handle, this line rule integrates smoothly into both tool kits and inspection stations; its small mass and refined finish facilitate controlled placement and fine alignment tasks. The trimmed format supports quick comparisons and scribing while occupying minimal bench space, helping to streamline workflows where speed and precision are both required. Supplied with the clear identification SKU M214.118, the item is straightforward to reference in inventory and quality records. Contact Metav Werkzeuge for specialist advice and secure supply of the M214.118 hairline rule from our Emmerich stock. Technical data Article number: M214.118 GTIN: 4054469106663 Norm: DIN 874/00 Category: Line rules Numbers Length: 50 mm Weight: 0.04 kg Accuracy class: 00 Tariff code: 90173000 Special features Material: INOX stainless steel, fully hardened, ground and lapped Finish: ground and lapped Application: precise marking and verification in fine‑mechanical work Brand: Metav IndustryLine FAQ What material is the rule made from? The hairline rule is manufactured from INOX stainless steel that is fully hardened, ground and lapped to provide a durable measuring face. Which accuracy standard does this rule meet? The rule conforms to DIN 874/00 and is produced to accuracy class 00, making it suitable for fine measurement and layout tasks. Is the 50 mm length suitable for precision components? Yes, the 50 mm format is designed for high rigidity and repeatable positioning, which is advantageous for precision components and micro‑assembly work. How should the rule be maintained to retain accuracy? Clean gently after use and store in a dry environment; the ground and lapped finish resists wear, helping to preserve the measuring edge under normal workshop conditions. How is the item identified for inventory and traceability? The product is listed under SKU M214.118 and GTIN 4054469106663 for clear traceability in stock and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500 mm Workshop Rule 40 x 5 mm Faceted Edge Ungraduated, Hardened Ground Special Steel - Metav IndustryLine
The robust construction and precise 500 x 40 x 5 mm dimensions provide a reliable reference for workshop layout and bespoke marking tasks; the faceted edge and ground special steel combine durability with a repeatable contact surface. Order the workshop ruler directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Workshop ruler M214.722 – 500 x 40 x 5 mm, faceted, ungraduated (Metav IndustryLine) The Workshop ruler M214.722 is a solid, ungraduated layout rule for heavy workshop use and customised marking tasks 500 mm overall length for larger components Ground special steel for wear resistance Faceted edge for accurate reference Unmarked surface for bespoke marking/workshop use Reliable reference for layout and assembly The 500 mm length and generous 40 mm width give this layout rule the stability required when marking larger profiles or aligning assemblies on the shop floor. Manufactured from ground special steel, the rule resists wear and preserves its flatness under regular workshop handling, which translates into fewer re-measurements and a smoother production flow. The ungraduated design leaves the surface free for custom scribing or fitted scale application, making the tool adaptable to varied layout systems. Precision contact and edge definition for repeatable work A faceted edge provides a clear contact plane that supports precise edge referencing during scribing or alignment. The ground finish reduces burrs and micro-unevenness that can distort marks; in practice this means a dependable baseline for repetitive tasks such as drilling jigs, fixture set-up or component trimming. The material and finish together prioritise repeatability and low maintenance, so standard workshop procedures remain efficient even under daily use. Practical workshop handling and application spectrum Designed with workshop ergonomics in mind, the rule’s proportions balance reach with manageable handling when used single-handed or as part of two-person operations. The ungraduated face is particularly useful for professionals who prefer bespoke markings, temporary scales or transfer scribing. As a result, the item is well suited to metalworking shops, maintenance departments and fixture makers who value a robust, adaptable layout tool that integrates easily into existing processes. For procurement advice and fast delivery from Emmerich, contact Metav Werkzeuge about the Metav IndustryLine workshop ruler M214.722 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M214.722 GTIN: 4054469109619 Customs tariff number: 90178010 Facts Dimensions: 500 x 40 x 5 mm Material: ground special steel Category: Workshop ruler / Lineal ECLASS: 21170122 Special features Faceted edge for reference contact Ungraduated surface (without division) Label: Werkstatt-Lineal 500 x 40 x 5, with facet, without graduation FAQ Is this ruler suitable for marking and layout on steel? Yes. The workshop ruler M214.722 is made from ground special steel and is suited to routine layout and marking tasks on steel components. Can the ruler be used as a guide for scribing and transferring dimensions? The faceted edge of the M214.722 provides a defined contact plane, making it appropriate as a guide for scribing and transfer marking in workshop environments. Does the product include factory calibration or certification? The workshop ruler M214.722 is supplied as a precision ground tool; no ISO 17025 calibration certificate is included with this ungraduated layout rule. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Digital Measuring Tape With Mm/Inch Display, 5m Capacity, 0.2kg - Metav IndustryLine
Take advantage of a compact, digital display and a full 5 m measuring range in a lightweight package; the M203.100 combines clear readout, practical tape geometry and easy handling to speed up routine measurements and reduce rework. Order the instrument directly via Metav Werkzeuge or consult the Metav advisers for application-specific guidance. M203.100 Digital measuring tape 5 m by Metav IndustryLine — digital readout with mm/inch toggle The M203.100 Digital measuring tape 5 m is a compact, workshop-grade measuring instrument designed for rapid linear measurements on site and in production environments, featuring a selectable mm/inch readout and a balanced housing for handheld work. Digital readout with mm/inch function 5 m measuring range, robust tape construction Lightweight 0.2 kg for handheld use High-visibility markings and sturdy frame Fast, reliable readings for everyday measurement tasks The integrated digital display with a dedicated mm/inch toggle gives an immediate, legible result that removes the need for manual conversion and reduces transcription errors. The instrument’s numeric readout and clear tape markings together promote faster data capture in the workshop; this rational advantage translates into fewer repeated measurements and shorter throughput times. The combination of a numeric display and the traditional tape scale supports both quick checks and documented measurement records. Practical design that supports site and workshop use With a full 5 m measuring range presented on a 19 mm tape blade, the unit strikes a balance between reach and manageable handling. At just 0.2 kg the tape is noticeably lightweight for handheld work, which lowers operator fatigue during repetitive measurement cycles. A robust frame and high-visibility graduations improve usability under workshop lighting, while the compact housing enables storage on a tool board or in a workbag. The device is suitable for installers, machinists and assembly staff who need a reliable, portable linear gauge. Integration into production and inspection workflows The measuring tape is appropriate as a routine measuring device where quick, repeatable distance checks are required. The digital readout supports clear documentation of linear measurements, helping to standardise inspection steps and streamline handover between operators. The straightforward functionality reduces training time and supports consistent process control, delivering a pragmatic benefit to production environments that value efficiency and traceable measurements. Contact Metav Werkzeuge for application advice and order the M203.100 directly from Metav Werkzeuge in Emmerich for a dependable digital measuring solution. Technical data Article number: M203.100 GTIN: 4054469102481 ECLASS: 21160103 Manufacturer: Metav IndustryLine Facts Measuring range: 0–5,000 mm (5 m) Weight: 0.2 kg Blade width: 19 mm Tariff number: 90173000 Special features Digital display with mm/inch toggle Compact, handheld housing High-visibility tape markings Category: Lineale (rulers) FAQ What measuring units does the device display? The M203.100 provides a digital readout with a selectable mm/inch function for flexible use in metric and imperial workflows. Is the tape suitable for workshop and site use? Yes, the digital measuring tape is designed for both workshop measurements and on-site checks, combining a 5 m range with a sturdy frame and a lightweight housing. How is the M203.100 best used in production routines? Its clear digital readout and legible blade markings make the M203.100 suitable for routine distance checks and documented inspection steps within serial production or assembly processes. Which identifier should be quoted when ordering or specifying the product? Please refer to SKU M203.100 or GTIN 4054469102481 when ordering or specifying the digital measuring tape. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Assembly Square Double-T Aluminium‑Magnesium Alloy Grade 0, Flatness 0.005mm - Metav IndustryLine
Take advantage of the combination of a lightweight aluminium‑magnesium alloy, Grade 0 geometry and a compact 500 × 60 × 30 mm profile for rapid, reproducible alignment and inspection tasks; order the Assembly Straightedge M214.742 directly via Metav Werkzeuge or consult our specialists if required. Assembly Straightedge M214.742 — 500 × 60 × 30 mm, Al‑Mg alloy, Grade 0 The Assembly Straightedge M214.742 is an aluminium‑magnesium alloy alignment aid designed for workshop assembly and fixture inspection, delivering Grade 0 flatness for reproducible positioning and visual checks. Assembly straightedge M214.742, Al‑Mg alloy Grade 0 accuracy with 0.005 mm flatness 500 × 60 × 30 mm profile, lightweight 0.8 kg Robust HV 80 surface hardness Reliable geometry for repeatable alignment The straightedge’s Grade 0 specification and measured flatness of 0.005 mm ensure a stable reference surface for assembly, alignment and visual inspection tasks. Such tight geometry permits reliable contact with workpieces and fixtures, reducing setup variance and supporting consistent line‑of‑sight checks. The provided numerical tolerances make the tool suitable for quality assurance stations where objective, comparable references are required. Lightweight handling with workshop resilience Constructed from an aluminium‑magnesium alloy, the profile combines low weight (0.8 kg) with structural stiffness across its 500 mm length, enabling single‑operator handling while maintaining positional integrity. The HV 80 surface hardness contributes to wear resistance during routine use, and the alloy’s mechanical properties — yield strength 110 kg/mm² and tensile strength 47 kg/mm² — provide a balance of rigidity and toughness for everyday assembly operations. Practical integration into production workflows The 500 × 60 × 30 mm format offers a practical compromise between reach and manoeuvrability, making it appropriate for bench assembly, jig setup and small‑batch inspection. The profile’s controlled parallelism of 0.005 mm supports cross‑check measurements and alignment against existing datum surfaces. In production environments this straightedge functions as a straightforward, dependable datum for visual and contact‑based verification without the complexity of larger equipment. Choose Metav IndustryLine’s Assembly Straightedge for consistent, workshop‑ready alignment and contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M214.742 GTIN: 4054469184500 Manufacturer: Metav IndustryLine Facts Length: 500 mm Overall height: 60 mm Width: 30 mm Weight: 0.8 kg Flatness: 0.005 mm Parallelism: 0.005 mm Hardness: HV 80 Yield strength: 110 kg/mm² Tensile strength: 47 kg/mm² Special features Material: Aluminium‑magnesium alloy Grade: Güte 0 (Grade 0) geometry Application: Alignment, assembly, visual inspection Compact profile for single‑operator handling Designed for reproducible reference measurements FAQ What level of flatness does the straightedge offer? The Assembly Straightedge M214.742 is supplied with a flatness specification of 0.005 mm, corresponding to Grade 0 geometry suitable for precise alignment and inspection tasks. Is the profile suitable for fixture and jig setup? Yes; the 500 × 60 × 30 mm format and parallelism of 0.005 mm make this Metav IndustryLine straightedge appropriate for fixture alignment, jig setup and bench assembly where a stable reference is required. How does the material affect handling and durability? The aluminium‑magnesium alloy results in a lightweight tool (0.8 kg) that is easy to manoeuvre, while the HV 80 surface hardness and specified mechanical strengths support routine workshop durability. Can the straightedge be used as a measurement reference in quality control? The Grade 0 geometry and the stated tolerances allow the straightedge to serve as a reliable reference for visual checks and contact comparisons in standard quality‑assurance procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Flexible Bending Scale Double-Sided Graduations 1/2mm Top 1mm Bottom Stainless Steel - Metav IndustryLine
Take advantage of a flexible stainless-steel measuring rule with double-sided graduations and a slim 13×0.5 mm profile that combines reach and manoeuvrability for workshop tasks; order or request advice through Metav Werkzeuge for tailored delivery and technical guidance. M214.194 Bending Scale — flexible stainless-steel rule with double-sided graduations M214.194 is a versatile bending scale designed for measurements on curved and flat surfaces in metalworking and workshop environments, featuring a flexible profile and dual graduations for fine and coarse reading. Flexible stainless-steel construction Double-sided graduations: 1/2 mm and 1 mm 500 mm measurement range with 13×0.5 mm profile Low weight 0.04 kg for easy handling Greater reach with controlled flexibility The bending scale is built from stainless steel, combining corrosion resistance with a controlled springiness that allows conforming to pipes, profiles and curved surfaces without permanent deformation. With a 500 mm measuring range and a slender 13×0.5 mm cross-section, the rule offers an effective balance between reach and torsional stiffness. This makes it suitable for assembly checks, template transfer and on‑site verifications where a rigid straight edge would be impractical. The flexible behaviour reduces the need for additional supports, improving workflow efficiency and saving set‑up time. Dual graduation for fast, reliable readings Equipped with double-sided graduations, the scale provides 1/2 mm divisions on one side and 1 mm divisions on the other, enabling both finer layout work and quick coarse measurements. The two graduations support a straightforward measurement flow: use the finer side for marking and the coarser side for rapid checks. The clear, machine‑finished markings minimise parallax and ensure consistent repeatability when comparing components. This feature supports rational decision‑making on the shop floor, as measurement data can be taken and acted on without additional tools. Lightweight handling and workshop practicality Weighing just 0.04 kg, the rule is exceptionally lightweight, reducing operator fatigue during repetitive tasks and easing transport between workstations. The slim profile fits into pockets, tool rolls or inspection kits, while the stainless-steel construction withstands daily use and cleaning. The flexible design is flagged as a deliberate characteristic, not a defect, allowing the rule to be used as a template for bending and trimming operations. For many workshops this means fewer tool changes and a smoother production rhythm. Suitable for mid-range workshop tasks Classified at the upper limit of the mid-range measurement class (up to 500 mm), the product bridges everyday bench work and larger assembly checks. Its dimensions and cross-sectional geometry provide a pragmatic compromise between reach and rigidity, making it a practical instrument for metalworkers, fabricators and fitters who require dependable measuring standards without resorting to heavier long‑stock gauges. The familiar, simple geometry keeps training time minimal and supports rapid adoption on the shop floor. Contact Metav Werkzeuge in Emmerich for product availability and technical advice — Metav Werkzeuge can supply the M214.194 bending scale and advise on the best measuring strategy for the application Technical Data Article number: M214.194 GTIN: 4054469107158 Manufacturer: Metav IndustryLine Facts Measurement range: 0–500 mm Length: 500 mm Cross-section: 13×0.5 mm Weight: 0.04 kg Tariff number: 90178010 eClass: 21160101 Special features Double-sided graduations — top: 1/2 mm, bottom: 1 mm Flexible execution Material: stainless steel Category: Lineale SKU: M214.194 FAQ What is the measuring range of this bending scale? The bending scale provides a measurement range of 0–500 mm and is designed for mid-range workshop tasks. Can the rule be used on curved surfaces without damage? Yes, the flexible stainless-steel design of the M214.194 allows repeated use on curved profiles while maintaining its measurement accuracy. Which graduations are marked on the rule? The rule features double-sided graduations with 1/2 mm divisions on one face and 1 mm divisions on the other for fine and coarse work. Is the material corrosion-resistant? The tool is made from stainless steel, which offers corrosion resistance suitable for regular workshop conditions. What applications suit this bending scale best? Typical uses include template transfer, pipe and profile measurement, assembly checks and quick layout work in fabrication and metalworking environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Flexible Bending Scale Double-Sided Graduations Top 1/2mm Bottom 1mm, Stainless Steel - Metav IndustryLine
Take advantage of a compact, flexible measuring tool that combines corrosion‑resistant stainless steel construction with clear double‑sided graduations (top 1/2 mm, bottom 1 mm) for fast, reliable layout work; order the rule directly via Metav Werkzeuge or consult the Metav team for application advice. M214.197 — Flexible steel rule, 500 mm, double-sided graduations The M214.197 is a flexible steel rule designed for medium‑range layout and profiling tasks in workshops and production environments. Flexible stainless steel construction for contours Double-sided graduations for fine and coarse marking 500 mm length for medium-range measurement Slim 18 x 0.5 mm profile for easy handling Precision where flexibility matters A flexible measuring rule built from stainless steel allows reliable measurements on flat and curved surfaces without sacrificing legibility. The 500 mm length places this tool in the medium‑range category (suitable for larger components while remaining easy to guide by hand), and the double‑sided scale with 1/2 mm divisions on one face and 1 mm on the other speeds up layout work by offering a fine and a coarse scale in a single instrument. The combination of flexibility and a slim cross‑section supports quick transfer of dimensions while keeping the tool rigid enough for repeatable marks. Practical benefits for workshop layout and profiling The slim 18 x 0.5 mm profile balances manoeuvrability with sufficient stiffness for everyday use; it lies flat on surfaces yet bends when needed to follow contours, which reduces measuring time on pipes, chassis parts and formed sheet. At approximately 0.06 kg, the rule is lightweight and suitable for one‑hand operation during marking or scribing. Having both fine and coarser graduations on opposing faces eliminates frequent scale changes and reduces the likelihood of transcription errors, contributing to a faster and more efficient workflow on the shop floor. Durable design for everyday reliability Manufactured from corrosion‑resistant material and finished for long service life, this measuring rule withstands typical workshop conditions and keeps graduations legible over extended use. The flexible execution reduces the risk of permanent bending compared with softer alloys, while the clear dual markings support multi‑step measurements without additional tools. Supplied as a compact, easy‑to‑store rule, the instrument supports consistent results for layout, profiling and quick checks across a wide range of medium‑sized components. For tailored advice on integrating the Metav IndustryLine flexible steel rule into production workflows or to secure this measuring rule via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M214.197 GTIN: 4054469107172 Tariff number: 90178010 ECLASS: 21160101 Dimensions and core data Length: 500 mm Cross section: 18 x 0.5 mm Measurement range: 0–500 mm Weight: 0.06 kg Materials and special features Material: stainless steel Graduations: double‑sided — top 1/2 mm, bottom 1 mm Execution: flexible design Classification: Medium‑range (300–500 mm) FAQ Can the rule measure curved surfaces accurately? Yes. The Metav IndustryLine flexible steel rule M214.197 is designed to follow contours and provides accurate linear readings when applied correctly to curved surfaces. Which applications is this rule best suited for? The tool is ideal for layout, profiling and marking of medium‑sized components such as pipes, sheet metal assemblies and fixtures where a 500 mm reach and flexible contact are beneficial. How visible are the graduations in workshop conditions? Graduations on the M214.197 are clear on both faces (1/2 mm and 1 mm), ensuring good legibility under normal workshop lighting and reducing measurement errors during marking. Is the material resistant to corrosion? Yes. The rule is made from stainless steel, offering enhanced corrosion resistance suitable for common workshop environments. Does the rule require special handling or storage? No specialised storage is necessary; keeping the rule flat or in a drawer avoids excessive bending. The flexible design allows routine use without impairing scale accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Flexible PET Measuring Tape 0.25mm Division, Transparent 25×0.1mm Cross-Section - Metav IndustryLine
Take advantage of a flexible PET-film design and a fine 0.25 mm graduation to handle medium-range measuring tasks with minimal fuss; the pliable, transparent construction makes circumference and length measurements quicker and more reliable. Order the item directly via Metav Werkzeuge or ask the consultants for application advice. Metav IndustryLine Flexible PET-film Scale, 500 mm, 0.25 mm graduation A flexible PET-film scale for measuring distance, length and circumference in workshop and craft applications Flexible PET-film construction, transparent Fine 0.25 mm graduation for precise readings 500 mm length for standard workshop tasks Slim cross-section 25 x 0.1 mm, easily stored Precise readings where flexibility is needed This flexible PET-film scale combines a transparent, pliable material with a 0.25 mm graduation to deliver accurate manual measurements for small to medium components. The thin, readable scale is suited to measuring both straight lengths and wrapped circumferences; the fine division reduces interpolation error and supports more consistent transfer of dimensions to production processes. The design prioritises reliable visual reading and quick adaptation to irregular shapes, so measurement cycles can be completed with fewer adjustments. Compact handling that speeds up routine tasks With a 25 x 0.1 mm cross-section the scale stays unobtrusive in a tool drawer and slips easily into inspection kits, enabling faster setup and reduced downtime between checks. The slim profile supports convenient one-handed handling while marking or recording, which shortens inspection times and lowers the risk of measurement interruptions. The practical form factor therefore contributes directly to improved workflow efficiency in repetitive measurement tasks. Balanced reach for workshop requirements Classified for the medium range (300–500 mm), this 500 mm length provides an effective compromise between reach and stiffness for many fixtures, housings and component assemblies. The scale’s flexibility does not sacrifice usability over this span; the material maintains sufficient profile to follow part contours while remaining easy to align. This balance makes it a dependable choice for machinists and technicians who require both scope and manageable handling in day-to-day measuring. Durable material suited to practical use Made from PET, the scale is lightweight yet robust and resists typical workshop soiling without affecting legibility. The transparent film aids visual alignment against markings and edges, while the flexibility enables wrap-around checks on circular parts. These characteristics support repeated use in inspection and layout work, reducing the need for auxiliary fixtures or awkward workaround methods when measuring non-planar surfaces. For precise, flexible medium-range measuring, request the Metav IndustryLine flexible PET-film scale via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com for tailored application advice Technical data Article number: M203.142 Manufacturer: Metav IndustryLine Designation: Flexible PET-film scale, 500 mm, 0.25 mm graduation SKU: M203.142 Facts Length: 500 mm Graduation: 0.25 mm Cross-section: 25 x 0.1 mm Special features Material: PET film Transparent and flexible For measuring distance, length and circumference FAQ What applications is this flexible PET-film scale suitable for? The flexible PET-film scale is designed for measuring distances, straight lengths and circumferences, making it suitable for layout, inspection and craft applications in workshops. How fine is the graduation and what does that mean in practice? With a 0.25 mm graduation the scale provides finer visual resolution than typical 1 mm rules, supporting more accurate manual readings and reducing interpolation when transferring dimensions. Does the material withstand workshop conditions? The scale is manufactured from PET film, which is lightweight and resistant to typical workshop soiling; the transparency preserves legibility for repeated use. Is this length suited to general workshop measurement tasks? At 500 mm the scale falls into the medium range (300–500 mm) and offers a balanced combination of reach and manageable handling for many common components and assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Hairline Rule, Hardened Ground Stainless Steel, DIN 874/00, 1.6 kg - Metav IndustryLine
Benefit from the combination of hardened INOX steel, DIN 874/00 tolerance class 00 and a 500 mm measuring length for dependable flatness and alignment checks; the construction supports repeatable reference measurements in workshop and inspection settings. Order the straight edge directly via Metav Werkzeuge or consult our product specialists for application guidance. Hairline straight edge INOX 500 mm DIN 874/00 — hardened stainless steel (Metav IndustryLine) A Hairline straight edge INOX 500 mm DIN 874/00 designed for precision alignment, flatness verification and reference measurements in metrology and workshop environments. Hardened stainless steel, ground and lapped Compliant with DIN 874/00 tolerance class 00 500 mm measuring length for workshop use Robust construction for repeatable alignment Consistent reference accuracy for inspection and set-up The straightedge is built from INOX steel, fully hardened, ground and lapped to deliver a stable reference surface that resists wear and distortion. Compliance with DIN 874/00 and the declared tolerance class 00 ensures that the tool provides a known geometric standard for alignment, bench checks and machine set-up. The finished surface and precise edge geometry minimise local deviations, which makes the instrument suitable as a comparison gauge for visual, feeler‑gauge and optical checks, supporting faster decision making on the shop floor. Practical dimensions and workshop usability At a 500 mm length the straightedge balances reach and rigidity: long enough to span typical workpieces yet compact enough for single‑operator handling and storage. The profile and hardened construction improve resistance to nicks and bending, which helps maintain repeatable accuracy in daily use. The product’s finish reduces sticking and makes surface inspection straightforward, while the weight and geometry favour stable placement on flat references and component faces—benefits that increase throughput during alignment and assembly tasks. Clear specification for purchasing and integration The specification focuses on measurable characteristics and conformity, offering a transparent basis for procurement and quality planning. The straightedge’s designation underlines its intended use as a precision tool for alignment and flatness verification in machine shops and inspection labs. As a branded Metav IndustryLine product, it fits into a broader supply chain of calibrated references and measuring equipment, allowing straightforward substitution in existing workflows and inventory systems. Contact Metav Werkzeuge for detailed specification comparisons or to request a tailored offer for measurement equipment in Emmerich; our technical team can advise on selecting the right reference tools for workshop and inspection applications. Technical data Article number: M214.125 GTIN: 4054469106755 eClass: 21170120 Facts Length: 500 mm Tolerance class: 00 Tariff number: 90173000 Special features Material: INOX steel, fully hardened, ground and lapped Standard: DIN 874/00 Brand: Metav IndustryLine FAQ What tolerance class does this straight edge meet? The Hairline straight edge INOX 500 mm DIN 874/00 is specified to tolerance class 00 under DIN 874/00. Which material is used for the straight edge? The straight edge is manufactured from INOX steel that is fully hardened, ground and lapped for wear resistance and stable reference surfaces. Is the product suitable for flatness and alignment checks? Yes, the Hairline straight edge INOX 500 mm DIN 874/00 is intended as a reference tool for flatness verification, alignment and inspection tasks in workshops and inspection areas. How should the straight edge be maintained? Maintain the straightedge by keeping surfaces clean and free from debris; use light machine oil for corrosion protection where required and store on a flat, protected surface to preserve the ground and lapped reference faces. Can the straight edge be integrated into an existing inspection workflow? The Metav IndustryLine hairline straight edge (SKU M214.125) is specified for use as a workshop and inspection reference and can be incorporated into existing measurement processes that rely on DIN 874/00 standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Stainless Steel Rule Double-Sided Graduations 1/2mm Top 1mm Bottom, Rigid - Metav IndustryLine
Take advantage of the combination of rigid stainless-steel construction, dual-sided graduations (1/2 mm and 1 mm) and a slim 30 x 1 mm profile for accurate, repeatable layout work; order the steel rule directly via Metav Werkzeuge or ask our consultants if needed. Steel rule M214.184 — rigid stainless-steel rule, double-sided graduations (500 mm) — Metav IndustryLine A steel rule, 500 x 30 x 1 mm, designed for precise workshop measurement, layout and marking with dual graduations for versatile use across metalworking and assembly tasks Rigid stainless-steel construction Dual-sided graduations: 1/2 mm & 1 mm 500 mm length, 30 x 1 mm profile Corrosion-resistant finish for longevity Designed for reliable, repeatable workshop measurement The rigid construction and stainless-steel material provide a stable reference for layout and inspection tasks, reducing flex and user-induced variation during use. At a 500 mm working length the rule bridges the practical gap between reach and stiffness, making it suitable for bench work and on-machine layout alike. The slim 30 x 1 mm profile keeps weight low while preserving a straight edge for scribing, and the lightweight design supports frequent handling without fatigue. This combination promotes consistent results and faster cycle times where simple, robust precision is required. Faster marking and clearer readings with dual graduations Two facing scales—1/2 mm on the top edge and 1 mm on the lower edge—allow selection of the most convenient resolution for the task. Fine positioning or incremental marking benefits from the half-millimetre scale, while coarse layout and rapid checks use the full-millimetre graduations. The clear, double-sided layout reduces steps in the workflow and minimises the need to swap tools, improving throughput on repetitive jobs and supporting efficient shopfloor routines. The visible gradations and straight edge simplify transfer of measurements to components and fixtures. Built for longevity and low maintenance Manufactured from stainless steel, the rule resists corrosion in workshop environments and maintains legibility of the scale over prolonged use. The rigid design resists bending during normal handling and under light clamping, which contributes to sustained accuracy over time and fewer tool replacements. A compact cross-section and a low mass (approx. 0.1 kg) make the rule easy to store and manoeuvre while remaining robust enough for day-to-day industrial tasks. The result is a maintenance-light measuring tool that supports continuous operation. Certified sourcing and professional supply chain advantages Sourced and distributed under the Metav IndustryLine umbrella, the rule benefits from Metav’s European quality filter and logistics from Emmerich. The product harmonises simple, workshop-focused design with dependable supply and traceability, making it a pragmatic choice for production workshops, tool rooms and maintenance teams. Metav’s broad catalogue and track record are designed to reduce procurement complexity and supply risks for industrial customers who need dependable measuring equipment on demand. For procurement of the rigid 500 mm stainless-steel rule from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and technical advice. Technical data Article number: M214.184 GTIN: 4054469107080 ECLASS: 21160101 TARIC (Customs) number: 90178010 Numbers / Core technical data Length: 500 mm Cross-section: 30 x 1.0 mm Weight: 0.1 kg Measurement range: 0–500 mm Top graduation: 1/2 mm Bottom graduation: 1 mm Designs / Special features Material: stainless steel Rigid design Double-sided graduations Slim, easy-to-handle profile FAQ What material is the rule made from? The steel rule M214.184 is made from stainless steel, supplied under the Metav IndustryLine brand for corrosion resistance and workshop durability. Which graduations are printed on the edges? The rule features dual-sided graduations with a 1/2 mm scale on the upper edge and a 1 mm scale on the lower edge to cover fine and coarse layout tasks. Is the rule suitable for machine-shop layout and marking? Yes, the 500 mm length and rigid stainless-steel profile make the rule suitable for bench and machine-shop layout where a stable, repeatable edge is required. What are the product identifiers for ordering and traceability? Use SKU/Article number M214.184 and GTIN 4054469107080 when ordering or recording the item in inventory. How does the slim profile affect handling? The 30 x 1 mm profile keeps the rule lightweight (approx. 0.1 kg) and easy to manoeuvre while maintaining sufficient stiffness for accurate scribing and layout. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Steel Straightedge Blackened, Hardened Ground And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of a precision inspection tool that combines DIN 874/00 conformity with a robust, fully hardened and lapped working surface for repeatable straightness checks; the compact 500 mm length ensures easy handling and fast set-up in production control. Order the straight edge directly via Metav Werkzeuge or ask our consultants for a specification recommendation. Hairline straight edge M214.025 — 500 mm, hardened tool steel (Metav IndustryLine) The Hairline straight edge 500 mm is a precision inspection reference designed for flatness and straightness verification in workshop and quality‑control environments. DIN 874/00 grade 00 accuracy Hardened, ground and lapped working surface Black blued corrosion‑resistant finish Compact 500 mm length for easy handling A dependable reference for inspection and setup A carefully manufactured straightedge is a simple way to raise the reliability of routine inspections. Conforming to DIN 874/00 and classified as grade 00, this inspection tool provides a consistent reference for straightness and flatness checks on machine beds, gauge blocks and finished parts. The combination of a finely lapped surface and visible hairline edge assists optical alignment tasks and ensures that deviations are revealed quickly, reducing inspection time and avoiding costly rework. Built for repeatability and long service life Constructed from tool steel, the rail is fully hardened, then ground and lapped to create a stable measuring face that resists distortion under normal workshop use. The black blued finish gives basic protection against corrosion while maintaining the precision of the mating surface. These attributes translate into durable performance: fewer replacements, predictable inspection results and a lower cost of ownership over the tool’s service life. The solid construction supports repeatable checks that are meaningful for production control and process validation. Easy handling, care and workshop integration At 500 mm the format balances reach and stiffness, allowing single‑person use without compromising rigidity. The slim hairline edge provides a clear sightline for optical checks and for use with feeler gauges or scribing operations. Routine care is straightforward: keep the working face clean and free of chips, avoid heavy impacts, and store the rail in a protective sleeve or drawer when not in use to retain its geometry. Integration into standard inspection routines is immediate, supporting faster set‑up and simpler quality documentation. Contact Metav Werkzeuge for a technical consultation or to request a quotation for the Metav IndustryLine hairline straight edge M214.025 Technical Data Article number: M214.025 GTIN: 4054469106168 Standard: DIN 874/00 Facts Length: 500 mm Grade: 00 Tariff code: 90173000 Special features Material: tool steel, fully hardened, ground and lapped Surface: black blued finish Category: Lineal / inspection straightedge FAQ What is the typical use for this straight edge? The hairline straight edge M214.025 from Metav IndustryLine is intended for visual and tactile straightness and flatness checks in workshops and quality control, as a reference for machine set‑up and for quick inspection of finished parts. Which standard and accuracy does it meet? This product complies with DIN 874/00 and is classified as grade 00, providing a fine reference level suitable for workshop inspections where a precise flatness reference is required. What is the construction and finish of the rail? The straight edge is made from hardened tool steel, ground and lapped for a fine working face, and supplied with a black blued finish for basic corrosion protection. How should the straight edge be maintained to keep accuracy? Clean the working face after use, protect it from knocks and abrasive particles, and store the rail in a padded drawer or sleeve to avoid nicks that could affect measurement repeatability. Is the 500 mm length suitable for all workshops? The 500 mm length offers a good compromise between reach and stiffness for most workshop tasks; for other length requirements please contact Metav Werkzeuge for advice and available options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Wooden Case For Hairline Rules - Metav IndustryLine
Take advantage of a sturdy wooden transport solution that pairs secure protection with a precise fit for 500 mm hairline rulers, keeping measuring instruments ready for immediate use; order directly via Metav Werkzeuge or ask the advisers for further details. Wooden case M214.025.K – transport case for 500 mm hairline rulers (Metav IndustryLine) Wooden case M214.025.K is a robust wooden transport case designed to protect and store 500 mm hairline rulers in workshop and inspection environments Robust wooden construction for safe storage Fits 500 mm hairline rulers precisely Lightweight at 1.9 kg for easier handling Protects measuring edges and surfaces Secure storage that preserves measurement accuracy A dedicated wooden transport solution provides reliable protection for delicate measuring instruments. The precise internal fit for 500 mm hairline rulers prevents lateral movement and abrasion during transport or storage, which preserves the delicate hairline edge and calibration status. By limiting mechanical stress on the scale and edges, the box contributes to fewer reworks and reduced downtime in the workshop, supporting a steady inspection routine and dependable measuring results. Practical handling that speeds up workshop workflows Designed with workshop routines in mind, this transport case combines lightweight handling (1.9 kg) with a compact footprint to simplify movement between bench, machine or inspection station. The tidy storage arrangement reduces time spent searching for the correct ruler and streamlines shift handovers; instruments remain organised and ready for immediate use. The result is a modest but tangible improvement in operational efficiency for metalworking and quality-control tasks. Durable construction to protect investment and support longevity A wooden protective case offers long-term resistance against knocks and scratches while remaining a straightforward, low-maintenance container for precision tools. The construction minimises moisture exchange and surface damage compared with loose storage, so calibration intervals remain predictable. For organisations that rely on consistent measuring performance, the box supports tool preservation and contributes to sustained measurement reliability across routine production and inspection cycles. Order the Metav IndustryLine wooden transport case now via Metav Werkzeuge in Emmerich for reliable protection of 500 mm hairline rulers; for specification queries or to confirm compatibility the Metav team is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.025.K GTIN: 4054469160719 Manufacturer: Metav IndustryLine Numbers / Core technical data Weight: 1.9 kg Fits: 500 mm hairline rulers Design / Special features Wooden transport case Protects precision edges and surfaces Image: m214025k-main.png FAQ How many hairline rulers fit inside the case? The wooden case M214.025.K is designed specifically to accommodate a 500 mm hairline ruler; the internal layout secures a single instrument for transport and storage. Does the case protect the measuring edges during transport? Yes, the Metav IndustryLine wooden case provides a precise internal fit that prevents movement and surface contact, helping to protect the hairline ruler's edges and scale graduation. Is the case suitable for workshop use and frequent handling? The case’s robust wooden construction and modest weight (1.9 kg) make it appropriate for regular workshop handling and short-distance transport between benches and inspection areas. Is an image available to verify the design before ordering? An image file (m214025k-main.png) is provided in the product assets to review the case design and dimensions visually Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Working Scale With Mm Graduation, DIN 866/B - Metav IndustryLine
Take advantage of a DIN 866/B‑compliant measuring rule made from ground special steel with a clear mm graduation and a stable 500 mm profile for reliable layout and inspection work; order directly via Metav Werkzeuge or consult the technical team for specification support. Working steel rule 500 x 40 x 5 mm DIN 866/B (mm graduation) — Metav IndustryLine The Working steel rule 500 x 40 x 5 mm DIN 866/B is a robust, workshop‑grade ruler designed for precise linear measurement, marking and quality checks across metalworking and general fabrication tasks. DIN 866/B compliant rule Ground special steel construction Precise mm graduation 500 mm working length, stable profile Reliable standard compliance for repeatable results Built to DIN 866/B, this steel rule gives a verifiable basis for routine measurement tasks and shop inspection. The mm graduation is machined for clarity and repeatability, supporting accurate marking and rapid visual checks. As a standardised item, it integrates easily into inspection routines and technical documentation, reducing interpretation errors and supporting consistent production quality. Durable construction that keeps its edge The rule's special steel substrate is ground to a fine finish, which improves wear resistance and reduces the risk of surface deformation during daily use. This stability matters when measurements must remain consistent over time: the hardened and ground face preserves the graduation and resists nicks from tool contact. The result is lower replacement frequency and dependable performance in a busy workshop environment. Practical handling and workshop applications With a 500 mm working length and a 40 mm wide profile, the scale balances reach and stiffness for layout, scribing and quick inspection tasks. The robust profile reduces flex when laying the rule across parts, improving measurement reliability on flat components and assemblies. Suited to general fabrication, maintenance, and setup work, the steel rule is a compact tool that complements vernier and digital instruments for daily shop use. For DIN 866/B precision and dependable supply, contact Metav Werkzeuge in Emmerich for tailored advice and procurement. Technical data SKU: M214.712 GTIN: 4054469109541 Tariff number: 90178010 Core technical data Dimensions: 500 x 40 x 5 mm Weight: 0.8 kg Special features Material: Special steel, ground Standard: DIN 866/B Graduation: mm division FAQ What is the exact length and profile of the rule? The working steel rule is 500 x 40 x 5 mm (SKU M214.712), offering a stable profile suited to layout and inspection tasks. Which standard does this rule comply with? This rule conforms to DIN 866/B, ensuring measurement consistency in workshop and inspection settings. What material and finish are used for the scale? Manufactured from ground special steel, the scale provides wear resistance and a consistently legible mm graduation. Is a calibration certificate supplied with the rule? No specific calibration certificate is detailed for this working steel rule; its conformity to DIN 866/B defines its measurement standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Rule 40mm Width, Bevelled Edge, Millimetre Graduation - Metav IndustryLine
The combination of a 500 mm measuring length, ground special-steel construction and a facetted edge ensures reliable, repeatable workshop measurements and long‑term durability; order this robust workshop rule directly via Metav Werkzeuge or contact our consultants for tailored advice. Workshop rule M214.732 — 500 x 40 x 5 mm, facetted edge, millimetre graduations (Metav IndustryLine) The Workshop rule M214.732 is a 500 mm long, 40 mm wide, ground special‑steel measuring rule with a facetted edge and clear millimetre graduations, engineered for routine workshop measurement and layout tasks across metalworking and general fabrication. 500 mm length, 40 mm width Ground special-steel construction Facetted edge for precise alignment Clear millimetre graduations Precision where it matters: consistent, measurable results A straight measuring bar gives a predictable baseline for layout and inspection; the 500 mm length provides a practical balance between reach and stiffness for most workshop tasks. The ground special steel surface reduces surface irregularities that can alter readings, so measurements remain consistent over repeated use. Millimetre graduations are laser‑sharp and easy to read, supporting rapid decisions on the shop floor and reducing rework. The measurable nature of the rule supports traceable work practices and straightforward integration into quality processes. Built for daily use: durability and handling benefits The rule’s ground finish and engineered profile deliver robustness in a compact form. The 40 mm width improves handling and prevents excessive bending during marking or when used as a straight edge. The facetted edge is hardened by the manufacturing process to maintain a crisp corner for scribing and alignment, which helps keep layout marks accurate and durable. These hardware choices mean less time replacing worn tools and more predictable production throughput, contributing directly to operational efficiency. Practical advantage of the facetted edge and graduation layout A facetted edge simplifies visual alignment and creates a small, repeatable contact line when scribing or checking edges; this is particularly useful when transferring datum lines across parts. Clear millimetre graduations with a vivid contrast reduce reading errors and speed up multiple measurements. For non‑specialists, “facetted edge” denotes a bevelled or chamfered border that gives a precise point of contact rather than a blunt surface, improving repeatability in everyday marking and measuring tasks without extra training. Typical uses and who benefits most The workshop rule suits machinists, fabricators, toolmakers and maintenance technicians who require a rugged, accurate straight edge for layout, marking and quick checks. Its dimensions and finish make it ideal for general metalworking, sheet fabrication and workshop assembly where a dependable, easy‑to‑read rule improves both speed and confidence. The compact size also fits into tool drawers and portable kits for mobile maintenance teams, offering a straightforward, low‑complexity solution that supports reliable results. For robust, workshop‑grade measurement choose the Metav IndustryLine workshop rule and contact Metav Werkzeuge in Emmerich for technical advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.732 GTIN: 4054469109688 Dimensions: 500 x 40 x 5 mm Material: Special steel, ground Label: Workshop rule 500 x 40 x 5 mm, facetted edge, mm graduations Core specifications Length: 500 mm Width: 40 mm Thickness: 5 mm Tariff number: 90178010 eClass: 21170122 Features & finish Ground surface finish Facetted (bevelled) edge for alignment Millimetre graduations Category: Rulers / Lineale Brand: Metav IndustryLine FAQ What materials is the rule made from and how is it finished? The Workshop rule M214.732 is manufactured from special steel with a ground surface finish, providing a flat and durable measuring face suitable for workshop use. Is the 500 mm length suitable for general workshop layout? Yes, the 500 mm length on this workshop rule strikes a balance between reach and stiffness, making it a practical choice for most layout, marking and inspection tasks. How does the facetted edge improve measurement and marking? The facetted edge produces a defined contact line for scribing and alignment; on the Workshop rule M214.732 this increases repeatability and reduces parallax when transferring datum lines. Does the rule include clear graduations for fast reading? The rule features precise millimetre graduations with high contrast engraving to support quick, reliable readings in busy workshop environments. Which professions or applications benefit most from this rule? Machinists, fabricators, toolmakers and maintenance technicians will find the rule useful for layout, marking, quick checks and as a reliable straight edge in fabrication and assembly tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Accurate checks with precision straightedges
Precision straightedges are high-accuracy measuring tools designed to verify flatness and straightness across surfaces. Available in several lengths and finished from durable metals, these instruments provide a simple, repeatable method for alignment and inspection in industrial settings.
How precision straightedges work and where they are used
A precision straightedge is laid against a surface to reveal deviations from true flatness or a straight line, with fine graduations enabling careful assessment of run-out and planar error. Typical applications include mechanical engineering, electronics, optics and microscopy, machine tool build and quality control, where reliable visual or feeler-gauge inspection prevents assembly issues and functional failure.
Key advantages that cut waste and speed up production
- high accuracy and stable construction reduce measurement uncertainty and help maintain production tolerances.
- stainless steel or other precision metals ensure long service life and corrosion resistance.
- fine graduations and etched scales allow precise readings and repeatable checks.
- various lengths suit bench work as well as larger components, shortening setup time.
- simple handling lowers inspection time and contributes to fewer rejects and rework.
Why Metav is the practical choice for precision straightedges
Metav combines decade-long expertise with a broad range of measurement tools, making it a pragmatic partner for workshop and production buyers. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav operates from Emmerich as a quality filter for the european market, offering consistent availability and straightforward order processing. For those seeking a reliable source of precision straightedges and complementary measuring instruments, Metav’s range and technical information help select the correct specification for the intended inspection task.
In brief
Precision straightedges deliver fast, reliable assessments of flatness and straightness across industries, improving quality control and reducing scrap while being simple to use and maintain.
FAQ
What materials are precision straightedges typically made from?
Precision straightedges are commonly manufactured from stainless steel or other precision metals to ensure stability, wear resistance and longevity in industrial use.
In which industries are precision straightedges most valuable?
Precision straightedges are widely used in mechanical engineering, electronics, optics and microscopy, machine tool construction and general quality control where geometric accuracy is critical.
How is a precision straightedge used to check flatness?
Place the precision straightedge on the surface and inspect gaps visually or with feeler gauges; fine graduations and a straight reference edge make deviations from flatness evident for correction or further machining.
Are different lengths available for precision straightedges?
Yes, precision straightedges are offered in various lengths to match bench-top inspections as well as larger component checks, allowing selection of the most efficient tool for each application.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com