Precision rulers for accurate alignment
Precision rulers are specialised measuring tools used to check flatness and straightness in metalworking and inspection processes, providing reliable alignment and verification for assemblies and machined surfaces. They are typically made from stainless steel or precision metals and serve machining, optics, electronics and quality control applications where tight tolerances are required; using a precision ruler improves repeatability and reduces non‑conformances. Common synonyms include straight edge and flatness gauge, and the durable construction alongside fine graduations ensures the tool remains accurate over years of workshop use.
212mm Rule Magnifier With Guided 10x Lens, Parallax-Free Reading, Stainless Steel Case - Metav IndustryLine
Take advantage of the combination of stainless-steel durability, 10× magnification and parallax-free reading for reliable visual inspection across a wide measurement range; order the instrument directly via Metav Werkzeuge or ask the consultants for detailed advice. Ruler magnifier M903.206 — measuring rule with 10× magnification and parallax-free scale (Metav IndustryLine) Ruler magnifier M903.206 provides a compact inspection aid for workshop and quality-control benches, combining an integrated loupe with a precise measuring rule for visual verification and marking tasks. 10× magnification for detailed inspection Parallax-free reading for reliable results Stainless-steel construction for longevity Supplied in a protective transport case Clear visual inspection with magnified scale The integrated 10× magnifier makes fine graduations legible without additional optics, turning routine checks into repeatable observations. Combined with a parallax-free reading arrangement, the device reduces reading error caused by viewing angle and supports measurements based on the printed scale rather than guesswork. The engraved division 0.1 mm remains easy to read under the lens, while the specified accuracy 0.02 mm gives a verifiable tolerance for comparative checks and quick go/no-go decisions. This configuration favours technicians who need a fast visual check with measurement-backed confidence. Built for workshop durability and stable handling Constructed from stainless steel, the measuring rule resists corrosion and abrasion encountered in everyday workshop environments. The overall length of 262 mm and a usable measurement range of 0–212 mm place this instrument in the Standard class for measuring tools, a format that balances reach and rigidity for general metalworking and assembly tasks. The robust build ensures dimensional stability: the rule lies flat on surfaces, reducing rocking during measurement and improving repeatability when used for marking or inspection on workbenches. Practical workflow integration and transport-ready supply The slim profile and clear graduations are suited to rapid inspection cycles and in-process checks. As the device is supplied in a protective transport case, it is safeguarded during storage and transit; the case is intended for transport protection rather than long-term storage. The compact design integrates easily into existing sets of hand tools or inspection kits, helping to standardise visual checks across multiple stations. Data output interfaces are not applicable to this manual optical aid, emphasising direct, human-centred inspection rather than digital logging. Suitable applications and user advantages Ideal for visual inspection, marking and comparative measurement, this magnified rule supports precision tasks in mechanical workshops, toolmaking and quality control. The combination of clear magnification and a parallax-reduced scale reduces subjective judgement in fine marking and quick checks. Where consistent visual verification is required alongside simple metric measurement, the instrument acts as a cost-effective complement to digital gauges, offering immediate readable confirmation without setup time or power requirements. Choose the Metav IndustryLine ruler magnifier for dependable visual measurement and contact Metav Werkzeuge for purchasing options or technical clarification by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M903.206 GTIN: 4061905448959 Manufacturer: Metav IndustryLine Facts Measurement range: 0–212 mm Overall length: 262 mm Division: 0.1 mm Accuracy: 0.02 mm Magnification: 10× Special features Material: stainless steel Parallax-free reading Supplied in protective transport case Category: Lineale (ruler / measuring rule) FAQ Is the magnifier suitable for workshop use? The ruler magnifier M903.206 is designed for workshop and bench inspection; its stainless-steel construction and protective transport case make it suitable for regular industrial handling. What measurement range and precision does the instrument offer? This measuring aid covers 0–212 mm and provides an accuracy of 0.02 mm, with a scale division of 0.1 mm for clear incremental readings. Does the product include a certificate or calibration document? No specific calibration certificate is supplied with this optical measuring rule unless otherwise specified; the instrument is intended as a visual inspection and measuring aid. Can the magnifier replace digital gauges for quality control tasks? The magnified measuring rule serves as a rapid visual verification tool and complements digital gauges; it is most effective for quick inspections and marking rather than full data-driven traceable measurement workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2500mm Assembly Ruler Double-T Profile With Relief Holes, Aluminium‑Magnesium Alloy - Metav IndustryLine
Take advantage of the combination of extra‑long reach, Grade 1 flatness and a lightweight Aluminium‑magnesium alloy construction for reliable large‑format alignment and repeatable assembly operations. Order the assembly straightedge directly via Metav Werkzeuge or ask the consultants for specification advice. Assembly straightedge M214.748 — 2,500 mm, Grade 1 alignment beam The Assembly straightedge M214.748 is a long-format alignment and mounting rule designed for accurate positioning and levelling of large assemblies in workshops and production environments. Extra‑long 2,500 mm alignment beam Grade 1 precision with 0.027 mm flatness Lightweight aluminium‑magnesium construction Relief holes for secure fixturing Designed for large‑format alignment with reproducible accuracy The 2,500 mm length places this alignment beam in the extra‑long category for large components, where single‑piece reference surfaces reduce setup time and cumulative error. The Grade 1 specification and the stated flatness 0.027 mm ensure a reliable datum over the full span, making it suitable for alignment tasks where a continuous straight reference is preferred to segmented measures. This extended reach minimises the need for multiple short rulers or repeat repositioning, improving throughput and reducing alignment deviations. Durable, light alloy construction for easier handling Constructed from an aluminium‑magnesium alloy, the beam balances stiffness with manageable mass: at 18 kg it is substantially lighter than many steel equivalents while maintaining structural integrity for workshop use. The material selection delivers practical handling advantages during installation and relocation, and the HV 80 hardness indicates a robust wear resistance for contact‑intensive tasks. These properties contribute to safer handling and lower fatigue during repeated use in assembly and jigs. Measured geometry for consistent results in assembly work Precise geometric specifications such as parallelism 0.033 mm complement the flatness rating to provide a reproducible reference in both vertical and lateral planes. For assembly and alignment work this translates into predictable mating and simplified inspection routines: once the beam is set, subsequent checks are faster and less prone to scatter. The presence of relief holes allows secure bolting or temporary fixturing without compromising the reference surface, facilitating integration into existing jigs and fixtures. Practical considerations for workshop integration With a total height of 150 mm and a width of 80 mm, the beam offers a stable profile for clamping and handling. The stated mechanical strengths — yield strength 110 kg/mm² and tensile strength 47 kg/mm² — describe the alloy’s load capacity under assembly stresses and help when selecting mounting hardware and support points. Because of its extra‑long span and mass, planned handling and storage procedures are recommended; two‑person lifting or dedicated transport aids simplify safe movement and preserve measurement integrity. For dependable large‑format alignment, contact Metav Werkzeuge (info@metav-werkzeuge.com | +49 2822 7131930) to discuss the Assembly straightedge M214.748, delivery options and integration into existing fixtures. Technical data Article number: M214.748 GTIN: 4054469184555 Manufacturer: Metav IndustryLine Facts Overall length: 2,500 mm Overall height: 150 mm Width: 80 mm Weight: 18 kg Flatness: 0.027 mm Parallelism: 0.033 mm Hardness: HV 80 Yield strength: 110 kg/mm² Tensile strength: 47 kg/mm² Special features Material: Aluminium‑magnesium alloy Grade: 1 (precision class) Relief holes for mounting and fixturing Suitable for long‑span alignment and assembly tasks FAQ What applications is this alignment beam best suited to? The Assembly straightedge M214.748 is intended for large‑format alignment, machining setup and fixture checking where a continuous, straight reference over 2,500 mm improves reproducibility and reduces rework. How does the Grade 1 flatness affect workshop accuracy? Grade 1 specification with flatness 0.027 mm provides a stable datum for alignment tasks; the tight surface tolerance reduces error accumulation across long assemblies and simplifies subsequent quality checks. Are the relief holes suitable for bolting to fixtures? Yes — the relief holes are incorporated to permit secure fixturing and temporary bolting without compromising the reference surface, enabling integration with existing jigs. Is the beam easy to handle given its length? At 18 kg the aluminium‑magnesium construction balances strength and manageability; however, safe handling is recommended and two‑person lifting or appropriate transport aids are advised for repositioning. Can this straightedge be used as a reference for precision inspection? The measured flatness and parallelism values make the beam suitable as a long reference surface for inspection and alignment tasks; its precision class is appropriate for workshop and production checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Stainless Steel Precision Ruler Hardened, Ground And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of a compact, workshop-ready measuring tool that combines durable stainless steel construction, DIN-conform accuracy and a fine hairline marking edge for repeatable results; order or request expert advice via Metav Werkzeuge for smooth integration into production or inspection routines. Hairline rule INOX 250 mm DIN 874/00 — hardened, ground and lapped (Metav IndustryLine) The Hairline rule INOX 250 mm DIN 874/00 is a hardened stainless steel measuring rule designed for precise marking and short-range dimensional checks in workshops and inspection benches. Fully hardened stainless steel construction Ground and lapped measuring face 250 mm length, DIN 874/00 compliance Precise hairline edge for fine marking Robust stainless construction for long service life The body is made from stainless steel that is fully hardened, then ground and lapped, which yields a wear‑resistant measuring face and a straight edge that resists deformation under normal workshop use. This finish reduces wear on the graduations and preserves the precision of the measuring surface over time, delivering a reliable tool for daily marking and quick dimensional checks where repeatability is essential. Fine hairline edge for accurate marking and short measurements A true hairline edge provides a narrow, visible reference for scribing and layout work, making micro adjustments and fine positionings straightforward. The ruled face adheres to DIN 874/00, ensuring standardised specification and interchangeability for quality control tasks. The compact 250 mm length balances reach and rigidity, offering a nimble measuring tool that is simple to handle while providing a clear reference line for components and assemblies. Practical workshop benefits and integration into workflows As a compact straightedge, this tool excels at short-range checks, alignment and marking tasks where larger instruments would be unwieldy. The hardened and lapped surface minimises burr formation and eases cleaning, supporting efficient throughput on the shop floor. The combination of standard conformity and robust finish makes the rule suitable for machine shops, toolrooms and inspection stations that require consistent, low-maintenance measuring aids. Contact Metav Werkzeuge for tailored advice on integrating the Hairline rule INOX 250 mm into measurement setups — technical consultants at Metav Werkzeuge in Emmerich are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M214.122.2 GTIN: 4054469106724 Standard: DIN 874/00 Material: INOX stainless steel, fully hardened, ground and lapped Length: 250 mm Customs tariff number: 90173000 Facts Length: 250 mm GTIN: 4054469106724 Customs tariff number: 90173000 Special features Hairline edge for fine marking Hardened measuring face for wear resistance Ground and lapped finish for flatness and longevity Category: Rulers Brand: Metav IndustryLine FAQ What applications suit this hairline rule? The hairline rule INOX 250 mm DIN 874/00 is intended for layout, marking and short-range dimensional checks in machine shops, toolrooms and inspection benches where a precise reference edge is required. Is the material corrosion resistant? Yes, the rule is made from INOX stainless steel; the fully hardened, ground and lapped finish provides good surface durability and resistance to typical workshop corrosion. Does the rule comply with recognised standards? The rule conforms to DIN 874/00, ensuring compatibility with standardised workshop and inspection procedures for short measuring lengths. Which benefits does the hardened and lapped finish provide? The hardened, ground and lapped finish increases wear resistance, maintains flatness and preserves readable graduations over continued use, which benefits repeatability and reduces the need for frequent replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Steel Rule Hairline Graduated, Black Oxide Finish, DIN 874/00 - Metav IndustryLine
Combine a compact 250 mm length with hardened, ground and lapped tool steel and DIN 874/00 conformity to secure a reliable workshop reference for inspection and layout tasks. Order the straight edge directly via Metav Werkzeuge or consult our specialists for application advice. Hairline straight edge 250 mm DIN 874/00 — hardened tool steel, blackened finish (Metav IndustryLine) The Hairline straight edge 250 mm DIN 874/00 is a compact, workshop-grade straight edge designed for precision inspection, layout and reference tasks in metalworking and quality control. Hardened, ground and lapped steel DIN 874/00 accuracy class 00 250 mm compact inspection length Compact reference for fast workshop checks A short, stable reference is often the most practical choice in everyday workshop use. The 250 mm length combines reach and rigidity to provide a reliable reference edge for quick flatness checks, squareness and small-scale layout work. Thanks to the hardened tool steel construction, this compact straight edge resists wear and retains its geometry under routine handling, reducing the need for frequent replacement and ensuring consistent measurement results. Precision engineered for reproducible inspection Conformity with DIN 874/00 signals suitability for reference-level tasks where a clearly defined straightness class is required. The rule is ground and lapped, processes that yield a controlled surface finish and tight geometric form; this ensures repeatable contact against measured surfaces and reduces measurement scatter. For workshop quality control, the combination of standard conformity and fine finishing delivers measurable benefits in traceable inspection workflows. Practical finish and robust handling for daily use The blackened finish reduces glare and provides corrosion resistance for long-term use in busy environments. Ground edges and a finely finished face help maintain contact quality during visual comparison or when used with feeler gauges and marking tools. The straight edge’s compact form factor also simplifies storage and handling on busy benches, making it a dependable tool for machinists, inspectors and layout technicians alike. For application guidance or to secure supply under Metav IndustryLine standards, contact Metav Werkzeuge in Emmerich for tailored advice and fast delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.022.2 GTIN: 4054469106120 Standard: DIN 874/00 Facts Length: 250 mm Tariff number: 90173000 Special features Material: tool steel, fully hardened, ground and lapped, blackened finish Category: straight edge / ruler for inspection and layout Weight listed on label: 0.34 kg FAQ What is the intended use of this straight edge? The hairline straight edge is intended as a compact reference edge for inspection, layout and flatness checks in workshop and small-scale quality control tasks. Does the straight edge conform to a recognised standard? Yes, the straight edge complies with DIN 874/00, indicating an accuracy class suitable for reference-level inspection work. What material and finish are specified for this tool? The tool is made from hardened tool steel, finished by grinding and lapping, with a blackened finish for reduced glare and improved corrosion resistance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3 m Diameter Tape Measure 13 mm With Circumference Scale, Dual-Sided Graduation, ABS Case, Locking Mechanism - Metav IndustryLine
Take advantage of precise diameter and circumference measurements thanks to the double-sided scale, sturdy steel tape and a secure locking mechanism; order the instrument directly via Metav Werkzeuge or consult Metav’s specialists for technical advice and availability. M203.140 Diameter Roll Tape (3 m, 13 mm) – Metav IndustryLine A M203.140 diameter roll tape designed for fast diameter and circumference checks in workshop, maintenance and pipework applications. Double-sided scale: mm and diameter on reverse 3 m tape length, 13 mm wide steel band Locking mechanism for secure readings Accuracy class II for reliable measurements Fast diameter and circumference checks that save time The double-sided layout places a standard millimetre scale on the front and a dedicated diameter scale on the reverse, enabling immediate conversion between circumference and diameter without manual calculation. The 3 m measuring range and 13 mm band width provide a balance between reach and rigidity, while the steel tape resists stretching for consistent readings. This arrangement reduces handling time on repetitive tasks and streamlines inspection routines in assembly or maintenance operations. Robust construction for everyday workshop use Encased in an ABS housing, the roll tape is lightweight yet impact-resistant; at approximately 0.1 kg it is easy to carry on-site. The integrated locking mechanism secures the band for stable measurements on pipes, cylinders and rolled stock, preventing slippage that would otherwise introduce error. Classified as accuracy class II, the instrument meets industrial tolerances for reliable, repeatable results during quality checks and incoming inspection workflows. Clear integration into measurement processes Traceability is straightforward: the tool is sold under article number M203.140 and carries a GTIN for inventory management. The compact design suits quick diameter checks up to 950 mm and simultaneous circumference readings, making it useful for pipe fitting, ductwork and round-part inspection. The simple operation reduces training time for staff and fits into established processes, improving throughput without compromising measurement confidence. For reliable diameter and circumference measurements, choose the Metav IndustryLine M203.140 and contact Metav Werkzeuge in Emmerich for procurement and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M203.140 GTIN: 4054469181790 Manufacturer: Metav IndustryLine Material: steel tape Housing: ABS Weight: 0.1 kg Facts Measuring range: 0–3,000 mm Tape width: 13 mm Accuracy class: II Suitable for diameters up to 950 mm Special features Double-sided division (front: mm; reverse: diameter in mm) Locking mechanism ABS housing Steel band FAQ What measurements can this roll tape perform? The M203.140 performs circumference measurements and, via its reverse scale, direct diameter readings up to 950 mm; the front side provides a standard millimetre scale. Is the housing durable for workshop use? Yes, the ABS housing protects the steel band from impacts and the locking mechanism keeps the tape secure during handling and measurement. What accuracy can be expected from this tape? The instrument is specified to accuracy class II, providing reliable results suitable for general industrial and workshop applications. Can this tape be used on pipes and cylindrical parts? The tape’s design is specifically intended for cylindrical measurements; the diameter scale on the reverse speeds up pipe and shaft checks. How is the product identified for stock and procurement? The product is listed as M203.140 with GTIN 4054469181790 for catalogue and inventory processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3 m Tape Measure 16 mm Blade ABS Case Locking Belt Clip, Class II - Metav IndustryLine
Take advantage of the combination of compact design, Class II accuracy and a secure positive lock for consistent workshop measurements; order directly via Metav Werkzeuge or consult the Metav team for specification advice. Metav IndustryLine pocket tape measure M203.110 – 3 m × 16 mm blade, Class II, ABS case The Metav IndustryLine pocket tape measure M203.110 is a compact, robust measuring tool for workshop and on‑site use, offering a 3 m reach with a 16 mm steel blade and a secure positive lock for repeatable readings. 3 m measuring range, 16 mm blade Class II accuracy certification ABS impact-resistant housing Belt clip plus positive lock Precision where it matters in everyday tasks A sturdy 3 m tape with a 16 mm blade provides a practical balance between reach and rigidity, making it well suited for carpentry, metalwork and general workshop applications. The measuring blade is made from steel, which maintains straightness over its working length and reduces sag when extended. Classified as Class II, this tape complies with recognised accuracy requirements for general industrial and construction tasks, so measurements are reliable without the cost and sensitivity of laboratory instruments. The compact format and clear scale markings enable quick, efficient measurements that speed up repetitive tasks and reduce rework. Built for handling and longevity on site The shell is moulded from ABS, chosen for impact resistance and low weight, and the whole tool weighs just 0.13 kg, making it easy to carry throughout the working day. A positive lock (feststeller) secures the blade at the desired length for hands‑free marking or transfer measurements, while the integrated belt clip keeps the tape accessible in a pocket or on a tool belt. These handling features minimise time spent fidgeting with tools and lower the risk of drops and consequential damage, which helps maintain uptime on the shop floor. Fit-for-purpose procurement and consistent results Supplied under the Metav IndustryLine label, this compact tape is optimised for trades and workshops seeking dependable, entry‑level metrology tools. The simple construction supports long service life and easy integration into a company tool set without special handling or calibration regimes. The combination of Class II accuracy, a resilient ABS housing and a steel blade offers predictable measurement behaviour across typical site conditions, supporting quality control and assembly tasks where consistent dimensions are required. For procurement or technical clarification on the Metav IndustryLine M203.110, contact Metav Werkzeuge in Emmerich — the Metav team will advise on suitability and supply options Technical Data Article number: M203.110 GTIN: 4054469181707 Manufacturer: Metav IndustryLine Measuring range: 0–3000 mm Blade width: 16 mm Weight: 0.13 kg Accuracy class: Class II ABS housing Steel tape (band steel) Belt clip included Positive lock (feststeller) FAQ Is this tape measure accurate enough for general workshop use? The Metav IndustryLine M203.110 meets Class II accuracy, which is suitable for routine industrial, construction and workshop measurements where standardised repeatability is required. What materials is the blade made from and how durable is the case? The blade is made of steel and the case is ABS, combining a durable tape with an impact‑resistant housing for everyday site use. Does the tape have a locking mechanism and a clip for carrying? Yes, the tool includes a positive lock for secure blade retention and an integrated belt clip for convenient carrying on the job. What is the measuring range and blade width of this model? The tape extends to 3 m and has a blade width of 16 mm, providing a stable profile for most workshop and on‑site measuring tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3 m Twist Drill Tape Measure 16 mm Nylon-Coated Blade With Locking Belt Clip - Metav IndustryLine
Take advantage of a durable, nylon‑reinforced steel tape and a secure locking mechanism for fast, repeatable measurements in the workshop; the compact design with belt clip keeps the tool at hand. Order the pocket tape measure directly via Metav Werkzeuge or ask our consultants if needed. Pocket Tape Measure M203.120 — 3 m, 16 mm nylon‑reinforced tape (Metav IndustryLine) A robust Pocket tape measure M203.120 designed for everyday workshop use with a 3 m nylon‑reinforced steel blade, ABS housing, locking mechanism and integrated belt clip for secure carrying. 3 m nylon‑reinforced steel tape 16 mm wide blade for stability ABS housing with belt clip Locking mechanism for secure readings Consistent readings for industrial‑grade tasks The construction targets reliable results in routine measuring tasks: the accuracy class II rating ensures conformity with standard tolerances for workshop measurement tools, while the nylon‑reinforced steel tape reduces wear on the printed graduations. This combination provides a dependable balance between durability and repeatability, so measurements can be taken quickly without compromising traceability or quality control. Designed to withstand workshop use An ABS housing protects the mechanism from knocks and abrasion, and the compact shell keeps the assembly light at 0.13 kg, simplifying one‑hand operation and transport. The tape’s 16 mm width increases stiffness during extended pulls and limits flutter, improving readability on longer spans. These material choices reduce downtime for replacements and support a longer service life under typical site conditions. Fast, ergonomic operation that saves time The tool includes a positive locking mechanism that holds the blade securely for marking and cutting tasks, while the integrated belt clip keeps the measure accessible between operations. The blade’s clear graduations and stable profile facilitate rapid measurement cycles, which translates into measurable time savings on repetitive job‑site tasks and improves workflow efficiency in production environments. Practical compatibility across common applications With a measuring range of 3 m, the tape covers a wide spectrum of day‑to‑day tasks from carpentry and metalworking to general maintenance. The nylon reinforcement gives the tape extra protection when used around rough surfaces, making it suitable for construction sites and workshop benches alike. Its compact dimensions support easy stowage alongside other hand tools. Traceability and identifying details for procurement The product’s clear identification and proven construction support simple stock management: the model is referenced as M203.120 and carries a GTIN for inventory systems. The robust mechanical design keeps maintenance needs low while offering reliable service over many measurement cycles, which benefits purchasing decisions that prioritise longevity and predictable performance. For supply and technical advice on the Metav IndustryLine Pocket Tape Measure M203.120, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to arrange delivery or discuss specifications. Technical data Article number: M203.120 GTIN: 4054469181738 Manufacturer: Metav IndustryLine Facts Measuring range: 0–3,000 mm Tape width: 16 mm Weight: 0.13 kg Accuracy class: II Special features Nylon‑reinforced steel tape ABS housing Locking mechanism Belt clip FAQ How accurate is this tape measure for workshop control? The M203.120 is rated accuracy class II, which meets standard tolerances for general workshop and construction measurement tasks where consistent, repeatable results are required. What materials is the blade made from and how is it protected? The blade is a nylon‑reinforced steel tape, providing enhanced resistance to abrasion and better protection for the printed graduations during regular use. Is the tape measure easy to carry on site? Yes, the casing includes an integrated belt clip and the compact ABS housing keeps the overall weight at approximately 0.13 kg, making the tool convenient for site work. Can this tape be used for longer pulls without bending? The 16 mm blade width increases stiffness and reduces flutter on longer pulls, improving readability and control when measuring up to the full 3 m range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3 m Twist Tape Measure 16 mm Double-Sided Nylon-Reinforced Band With Magnetic End Hook And Lock - Metav IndustryLine
Combine compact dimensions, robust construction and dependable accuracy for reliable on-site measuring; order directly via Metav Werkzeuge or consult our specialists for application advice. M203.130 Pocket Tape Measure — 3 m × 16 mm, double-sided blade, magnetic end hook M203.130 is a compact pocket tape measure crafted for workshop and site work, offering a reinforced 16 mm blade, double-sided millimetre graduation and a magnetic end hook for secure attachment. Double-sided mm scale for quick readings Magnetic end hook for secure attachment Nylon-reinforced 16 mm steel blade ABS case with locking and belt clip Clear readings for fast, reliable measuring The double-sided mm division provides immediate visibility from either side of the blade, reducing reading errors and speeding up repetitive tasks. Classified as accuracy class II, the scale meets recognised tolerances for general construction and workshop use, making it suitable for straightforward quality checks and rapid positioning. The clear metric graduations and a 16 mm blade width combine to deliver a stable reference line and legible marks even at a distance, supporting efficient workflow on site or in the workshop. Built to withstand daily workshop use Durability is achieved through a nylon-reinforced steel blade that resists kinking and edge damage while maintaining blade rigidity during extended reaches. The ABS housing protects the mechanism from knocks and falls, and the robust locking mechanism holds the blade securely for one-person measuring. The magnetic end hook enables hands-free fixing to ferrous surfaces, improving precision when aligning or transferring measurements. At approximately 0.13 kg, the tape remains lightweight enough for pocket carry without sacrificing resilience. Practical for a wide range of trades and tasks With a 3 m measuring range, this pocket tape is suitable for joinery, plumbing, electrical installation and general maintenance work where a compact, reliable instrument is required. The integrated belt clip and quick-release lock speed up routine operations and keep the blade controlled when retracting. Supplied under the Metav IndustryLine portfolio, the instrument benefits from Metav’s quality screening and logistics in Emmerich, ensuring consistent availability for professional workshops and trade professionals. For a robust, everyday measuring tool choose the Metav IndustryLine M203.130 and contact Metav Werkzeuge for precise product matching and prompt supply from Emmerich Technical data Article number: M203.130 GTIN: 4054469181769 Manufacturer: Metav IndustryLine Facts Measuring range: 0–3000 mm Blade width: 16 mm Weight: 0.13 kg Accuracy: Class II Special features Material: steel tape, nylon reinforced Case: ABS housing Features: double-sided mm division End fitting: magnetic end hook Handling: locking mechanism and belt clip FAQ What measuring range does this tape offer? The M203.130 provides a measuring range of 0–3000 mm (3 m), suitable for most on-site and workshop tasks. How accurate is the scale on this tape? The tape conforms to accuracy class II, which meets standard tolerances for construction and general workshop measurements. Is the blade resistant to damage and kinking? The blade on the M203.130 is made from steel with nylon reinforcement, which increases resistance to edge wear and reduces the risk of kinking. Can the tape attach to metal surfaces? Yes, the magnetic end hook allows the tape to be secured to ferrous materials for hands-free measuring and improved alignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30 m Twist Tape Measure 13 mm Double-Sided Graduation, ABS Case, Class II Accuracy - Metav IndustryLine
Take advantage of the combination of long-range coverage, robust construction and clear millimetre graduations for dependable site and workshop measurements; order the steel tape measure directly via Metav Werkzeuge or consult the team for specification support. Steel Tape Measure M203.161 — 30 m steel tape, double-sided mm division (Metav IndustryLine) A robust Steel Tape Measure M203.161 for precise linear measurement on construction and industrial sites. Durable 13 mm tape blade Double-sided mm division Nylon-reinforced steel blade ABS housing for impact resistance Long-range measurement with proven precision This tape offers a 30 m measuring span combined with accuracy class II, which suits most industrial and construction tasks where reliability over distance matters. The double-sided mm division speeds up measurement work by allowing readable marks from either side of the blade, reducing handling time on scaffolds or in confined areas. The graduated steel is suitable for repeated outdoor use and delivers a predictable error range consistent with its accuracy classification, supporting efficient quality control and project planning. Built to withstand site conditions The tape is formed from nylon-reinforced steel, providing a balance of flexibility and resistance to abrasion. Housed in an ABS case, the measure resists impact and everyday knocks typical on building sites and in busy workshops. At approximately 0.68 kg, the unit remains portable while offering sufficient mass for stable unwinding and retraction, helping to avoid blade whip and ensuring safer, more reliable single-person operation during long measurements. Clear handling and practical application With a 13 mm blade width the measure achieves a stable reading line while remaining compact for transport. The dual-sided millimetre scale reduces errors when transferring lengths to plans or when working in cramped positions, and the reinforced blade coating extends service life by protecting the printed graduations. This combination of readability, robustness and manageable weight makes the tape well suited for installers, tradespeople and workshop technicians who demand dependable linear measurement every day. For procurement or technical advice on the Metav IndustryLine steel tape, contact Metav Werkzeuge in Emmerich for personalised assistance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M203.161 GTIN: 4054469181837 Manufacturer: Metav IndustryLine Material: nylon-reinforced tape steel Housing: ABS Weight: 0.68 kg Facts Length: 30 m Tape width: 13 mm Accuracy: Class II Division: double-sided millimetre scale Special features Double-sided mm division Nylon-reinforced steel blade ABS impact-resistant case Suitable for construction and industrial use FAQ What measuring range does the tape cover? The tape provides a measuring range of 30 m, making it suitable for long linear distances in construction and industrial applications. Is the graduation easy to read on both sides? Yes, the double-sided millimetre division ensures clear readings from either side of the blade for faster and safer measurement transfer. What materials ensure the tape's durability? The blade is made from nylon-reinforced steel and the case is ABS, combining abrasion resistance with impact protection for prolonged field use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30 m Twist Tape Measure 13 mm Width Double-Sided Metric Scale ABS Case, Class II Accuracy - Metav IndustryLine
Take advantage of a 30 m measuring range, double‑sided millimetre graduations and a nylon‑reinforced steel blade to measure large components reliably; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. M203.151 — 30 m Steel Tape Measure with Double‑Sided mm Graduations (ABS Case) — Metav IndustryLine The M203.151 steel tape measure is a long‑range measuring tool designed for large‑format measurements in construction, pipework and industrial workshops, supplied in a robust ABS housing. 30 m measuring range 13 mm nylon‑reinforced steel blade Double‑sided mm graduations ABS housing for impact resistance Built for reliable long‑range measurement with clear benefits The long measuring range and compact rewind mechanism make this tape ideal where reach and retraction speed matter. The 30 m range (30,000 mm) caters to large‑format tasks such as external façades, long pipes and site layout. The nylon‑reinforced steel blade increases wear resistance and reduces edge fraying, which preserves the double‑sided mm graduations for consistent readability over time. Because the blade is both stiff and lightweight, this results in fewer sagging errors during single‑handed measuring and quicker, more efficient workflows on site. Readability and durability that speed up inspections Clear, double‑sided millimetre markings allow measurements to be taken from either edge without flipping the tape, speeding up repetitive checks. The unit conforms to accuracy class II, providing a dependable tolerance level for general industrial and building tasks. The ABS housing protects the mechanism from knocks and the compact casing reduces accidental damage when carried in a tool bag. Combined, these features mean inspections and layout work proceed with fewer interruptions and lower rework rates. Practical handling and site advantages for everyday use At around 0.9 kg, the tape is light enough for portable use yet substantial enough to feel robust in hand. The 13 mm blade width balances flexibility and stiffness: it is flexible enough for winding yet stiff enough for extended measurements without excessive bending. The rewind mechanism offers controlled retraction, limiting blade damage and improving operator safety. For teams measuring large circumferences or long runs, this steel tape is a practical and efficient alternative to measuring wheels or segmented systems. For dependable long‑range measuring, choose the Metav IndustryLine M203.151 — contact Metav Werkzeuge in Emmerich for tailored advice and rapid supply from stock. Technical data Article number: M203.151 GTIN: 4054469181806 Manufacturer: Metav IndustryLine Facts Measuring range: 30,000 mm (30 m) Blade width: 13 mm Weight: 0.9 kg Accuracy class: II Special features Double‑sided millimetre graduations ABS housing Band material: nylon‑reinforced steel Category: Lineals Besonderheit: doppelseitige mm‑Teilung FAQ How suitable is this tape for measuring long pipes and façades? The M203.151 steel tape measure is designed for long runs up to 30 metres and is well suited to pipework, façades and other large components where a stiff, reinforced blade helps maintain accuracy. What does accuracy class II mean for on‑site measurements? Accuracy class II indicates a standard industrial tolerance appropriate for general construction and workshop use; the M203.151 meets this level for reliable everyday measurements. Is the blade resistant to wear and moisture on site? The blade of the M203.151 is made from nylon‑reinforced steel, which improves wear resistance and helps protect the graduations during rough use on site. Can readings be taken from both edges of the blade? Yes, the double‑sided millimetre graduations permit measurements to be read from either edge, speeding up repetitive tasks without repositioning the tape. What advantages does the ABS housing offer on the Metav IndustryLine tape? The ABS housing provides impact resistance and a compact form for safe transport and storage, reducing the risk of mechanism damage during daily use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Aluminium Workshop Ruler With mm Graduation, Anodised, Non‑Glare - Metav IndustryLine
Take advantage of the anodised aluminium construction and clear millimetre graduation for reliable layout and marking in the workshop; the compact 300 mm length combines reach with stiffness for everyday tasks. Order via Metav Werkzeuge or contact our consultants for application advice. Workshop ruler M203.053 – 300 mm anodised aluminium, millimetre graduation (Metav IndustryLine) The Workshop ruler M203.053 is an anodised 300 mm aluminium rule with a matt, non-reflective millimetre scale designed for general workshop marking, layout and light assembly tasks. Anodised aluminium profile Millimetre graduation, non-reflective Compact 300 mm length for workshop use Lightweight 200 g for easy handling Precise, legible graduations that speed up routine work The matt millimetre graduation on this rule ensures clear, glare-free reading even under bright workshop lighting; contrast engraving reduces parallax and speeds up repeated measurements. As a compact, fixed-length gauge, the item supports quick marking and layout operations without the need for secondary verification, which helps to shorten set-up times on jigs and simple fixtures. The printed scale is aimed at practical accuracy for everyday metalworking and carpentry tasks rather than laboratory metrology. Robust, low-maintenance construction for daily use Manufactured from anodised aluminium, the profile offers corrosion resistance and a hard-wearing surface that tolerates workshop handling and occasional coolant splashes. The lightweight design keeps operator fatigue low when transferring the rule across benches or clamping areas, while the anodised finish protects the scale against abrasion. This durability reduces replacement intervals and contributes to uninterrupted workflow in a busy production environment. Designed for quick layout and repetitive tasks At 300 mm length the ruler hits a practical sweet spot: sufficient reach for most component marking while retaining the stiffness needed for repeatable straight lines. The compact format fits tool kits and bench drawers, enabling fast access at the point of need. For tasks that require combination with other gauges or stops, the rigid profile provides a reliable datum for scribing, checking edge alignment and trimming operations. Practical handling and compatibility with workshop routines The low mass and slim cross-section make the item easy to position and clamp; it is particularly useful for marking out, checking component edges and as a guide for hand-held tools. The engraving and anodised finish facilitate cleaning and resist oil and dirt, simplifying maintenance between shifts. For users who prefer documented supply chains, the rule is available from Metav IndustryLine and supplied with clear identification (SKU M203.053) for seamless procurement and stock management. Choose the Metav IndustryLine workshop ruler for dependable everyday precision and contact Metav Werkzeuge for personalised advice or to arrange supply from our Emmerich distribution centre. Technical data Article number: M203.053 GTIN: 4054469183367 Manufacturer: Metav IndustryLine Dimensions & weight Dimensions: 300 x 50 x 5 mm Length: 300 mm Weight: 0.2 kg Features Material: Anodised aluminium Graduation: Millimetre scale, non-reflective Finish: Eloxiert (anodised) FAQ Is the ruler suitable for precision layout work? The workshop ruler provides clear millimetre graduations and is intended for reliable workshop layout and marking; for laboratory-grade precision, specialised calibrated instruments are recommended. What material and finish does the ruler have? The rule is made from anodised aluminium with a matt, non-reflective finish to improve legibility and resist wear; designated in catalogue as M203.053. Can the ruler be used in wet or oily environments? The anodised surface offers good resistance to light oils and coolant splashes, and the non-reflective engraving aids cleaning and ongoing legibility. How compact is the ruler for workshop storage? At 300 mm length and 5 mm profile thickness the rule fits typical bench drawers and tool cases while remaining stiff enough for repeatable marking tasks. Is the product traceable for procurement records? Yes — the item is supplied under Metav IndustryLine with SKU M203.053 and GTIN 4054469183367 for inventory and purchasing systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Stainless Steel Precision Ruler Hardened, Lapped Surface, DIN 874/00 - Metav IndustryLine
Take advantage of a 300 mm hardened and finely finished stainless rule that meets DIN 874/00 for consistent workshop measurements; order directly via Metav Werkzeuge or consult our advisors for integration into production workflows. Metav IndustryLine hairline rule INOX 300 mm (DIN 874/00), hardened and lapped The Metav IndustryLine hairline rule 300 mm is a hardened, ground and lapped stainless measuring rule designed for precise layout, inspection and general workshop measuring tasks Hardened, ground and lapped INOX steel Complies with DIN 874/00 accuracy 300 mm measuring length for workshop use Fine hairline graduation for precise readings Long‑lasting precision for daily workshop use The hardened, fully finished INOX construction combines wear resistance with corrosion protection, ensuring stable dimensional behaviour across many measurement cycles. Ground and lapped surfaces provide a flat reference that reduces measuring error over time, which makes the rule a dependable choice for routine checks and layout work. The compact 300 mm length balances reach and rigidity for common machine‑shop tasks. Clear graduations that speed up inspection and layout A fine hairline graduation gives unambiguous visual feedback for quick readings on components and setups. Because the scale is produced to DIN 874/00, the markings and tolerances are consistent with recognised workshop standards, supporting repeatable results during assembly or quality controls. The precise finish minimises parallax and enhances legibility under shop lighting. Practical benefits for procurement and workshop efficiency The M214.123 hairline rule is offered as a straightforward, low‑maintenance measuring tool suitable for production benches and inspection tables. Its stainless construction lowers the need for protective maintenance, while the standardised format eases replacement and comparison across tool inventories. Sourcing through an experienced partner adds logistical reliability and reduces procurement complexity. Choose the Metav IndustryLine hairline rule for durable, DIN‑certified measuring precision and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for purchase advice or specification clarification Technical Data Article number: M214.123 GTIN: 4054469106731 ECLASS: 21170120 Standard: DIN 874/00 Material: INOX steel, fully hardened, ground and lapped Length: 300 mm Customs tariff: 90173000 Core specifications Measuring length: 300 mm Standard compliance: DIN 874/00 Special features Hardened stainless construction for wear resistance Ground and lapped reference surfaces for stability Fine hairline graduation for clear readings Workshop and inspection application FAQ Is this rule corrosion resistant? The rule is made from INOX stainless steel with a hardened, ground and lapped finish; this gives good resistance to corrosion in normal workshop environments. Does the rule meet recognised standards? Yes, the rule is manufactured to DIN 874/00, ensuring consistent graduation and dimensional tolerances suitable for workshop measurement tasks. What measuring length is available for this model? This variant is a 300 mm measuring rule (Article M214.123), offering a practical balance of reach and rigidity for general machine‑shop use. Is the scale suitable for inspection work? The fine hairline graduation and the stable reference surface make it suitable for routine inspection and layout operations in production and quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Steel Scribe Rule, Blackened Hardened & Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of a fully hardened, ground and lapped tool steel straightedge that meets DIN 874/00 for reproducible alignment and inspection. The compact 300 mm length with a blackened finish combines precision and low-glare handling for workshop and quality-control tasks — order the hairline straightedge directly via Metav Werkzeuge or ask the consultants if needed. Hairline straightedge 300 mm (DIN 874/00) — hardened tool steel, blackened (Metav IndustryLine) A Hairline straightedge 300 mm (DIN 874/00) designed for precision alignment and visual inspection in workshops and inspection bays Hardened tool steel, ground and lapped Conforms to DIN 874/00 for straightness Blackened finish for reduced glare Compact 300 mm length for fine inspection Precision where repeatable results matter The straightedge is manufactured from fully hardened tool steel, subsequently ground and lapped to deliver a stable reference surface with very low form deviation. Conformity to DIN 874/00 and the indicated grade 00 ensures the instrument functions as a reliable reference for visual and tactile checks of straightness, squareness and run‑out. This level of manufacturing control reduces measurement uncertainty and supports repeatable setup routines in production and inspection processes, making the tool suitable for toolrooms, inspection benches and fine mechanical assembly. Practical benefits for everyday inspection tasks At 300 mm, the length provides a practical compromise between reach and stiffness: long enough for routine layout and alignment, yet compact for tight workspaces and one‑hand handling. The blackened finish lowers surface reflections during visual comparison and protects the steel against superficial corrosion in standard workshop atmospheres. With a low-profile edge and clearly defined reference line, the straightedge simplifies quick checks on machine beds, fixture faces and component edges, speeding up set-up without adding process complexity. Durable design and maintenance advice for longevity The combination of hardened steel and fine finishing delivers durability under frequent use. Regular care is straightforward: keep the faces clean and dry, remove swarf and grit after each shift and store the instrument flat in a protective sleeve or drawer to avoid edge damage. Light oiling of the surface will protect against rust when the tool is not in use. Backed by Metav’s quality filter, this straightedge is intended to provide long service life under normal workshop conditions while maintaining the straightness required for inspection tasks. Select the Metav IndustryLine hairline straightedge for dependable reference work — contact Metav Werkzeuge in Emmerich for procurement and product advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M214.023 GTIN: 4054469106137 Category: Rulers Brand: Metav IndustryLine Standard: DIN 874/00 Facts Length: 300 mm Tariff number: 90173000 Quality grade: 00 Special features Material: fully hardened tool steel, ground and lapped Finish: blackened (schwarz bruniert) Intended use: precision alignment, visual inspection and straightness checks Delivery condition: ready for immediate use FAQ What is the straightedge intended for? The hairline straightedge 300 mm (DIN 874/00, SKU M214.023) is intended for precision alignment, visual straightness checks and routine inspection tasks on machine beds, fixture faces and components. What material and surface treatment does the tool have? The instrument is made from fully hardened tool steel and is ground and lapped, with a blackened surface finish for reduced glare and enhanced surface protection. What does grade 00 under DIN 874 mean for accuracy? Grade 00 under DIN 874 denotes the highest straightness class for this standard, indicating minimal deviation of the reference edge and suitability as a precision visual reference in inspection work. Is a calibration certificate supplied with this straightedge? The product specification does not list a calibration certificate; ISO 17025 calibration is not indicated for this item in the data provided. How should the straightedge be cared for to maintain accuracy? Keep the faces clean and free of debris, avoid dropping or striking the edges, store flat and apply light protective oil for long-term storage to prevent corrosion. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 x 40 x 5 mm Workshop Rule Ground Special Steel 0.6 kg - Metav IndustryLine
Take advantage of a precision-ground special steel construction combined with a 300 x 40 x 5 mm rigid profile to secure repeatable layout and marking in a busy workshop. Order the Workshop ruler 300 x 40 x 5 directly via Metav Werkzeuge or ask our consultants if needed. Workshop ruler 300 x 40 x 5 by Metav IndustryLine — precision-ground special steel, rigid profile The Workshop ruler 300 x 40 x 5 is a compact, heavy-duty steel rule designed for reliable layout, marking and simple measuring tasks in industrial and trade environments. Precision-ground special steel construction 300 mm effective measuring length 40 mm wide, rigid profile for stable readings Robust 5 mm thickness, workshop-rated weight Reliable precision where it matters most The precision-ground surfaces and the use of special steel ensure a flat, stable reference edge that supports accurate scribing and comparative checks. The compact 300 mm length is optimised for everyday workshop tasks where reach and rigidity must be balanced; the relatively wide 40 mm profile reduces profile deflection during handling and when used as a straightedge. These design choices translate into fewer setup errors and more consistent production layouts, which supports workflow efficiency and reduces rework. Stable design for clear, repeatable marking A 5 mm section thickness and a ground finish create a rigid profile that resists bending during routine use, improving repeatability for marking and assembly operations. The ground faces provide a crisp edge for pencil, scribe or scriber use, and the flatness improves the fit against machined faces and reference blocks. For workshops that need a dependable straightedge for jigs, templates and marking, the mechanical qualities of this rule deliver measurable gains in day-to-day accuracy. Low-maintenance tool suited to workshop environments The ground special-steel construction balances durability with serviceability: routine cleaning with a lint-free cloth and light oil will maintain the reference surfaces and prevent corrosion. The absence of a chamfer (ohne Facette) preserves the full width of the measuring face for longer usable life in layout tasks. As a practical workshop implement, the rule is ready for immediate use and integrates easily into existing tool kits and layout procedures without the need for special handling. Trusted origin and practical fit for industry users Offered under the Metav IndustryLine, this workshop rule is positioned for trades and light industry where straightforward, robust measuring equipment is preferred. The combination of material choice and ground finishing supports consistent performance across marking, measuring and template work. For buyers seeking a durable straightedge that reduces routine measurement variance, this rule provides a compact, dependable solution that aligns with industrial shop-floor demands. Choose the Metav IndustryLine Workshop ruler for dependable layout and marking — contact Metav Werkzeuge in Emmerich for ordering details or tailored advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: M214.701 GTIN: 4054469109466 Tariff number: 90178010 Material: Special steel, ground Facts Length: 300 mm Width: 40 mm Thickness: 5 mm Special features Precision-ground faces No chamfer (without facet) Workshop rule for layout and marking Category: Rulers FAQ Is this ruler suitable for workshop marking and scribing? The Workshop ruler 300 x 40 x 5 from Metav IndustryLine (SKU M214.701) is intended for workshop marking, scribing and template use thanks to its ground faces and rigid profile. What material and finish are used on the rule? The rule is made from special steel with a ground finish, providing a stable, flat measuring face and durable edge for layout tasks. Can the rule be used as a straightedge for machine setup? Yes, the rigid 40 mm profile and 5 mm thickness make it well suited as a straightedge for general setup and comparative checks in a workshop environment. How should the rule be maintained to preserve accuracy? Light cleaning with a lint-free cloth and a thin film of oil on the steel surfaces will protect against corrosion and help preserve the ground reference faces. Does the product include marking graduations or is it a plain rule? The Workshop ruler 300 x 40 x 5 is supplied as a ground steel rule intended as a reference and straightedge; any specific graduation detail is not stated in the available product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3000 x 150 x 80 mm Assembly Rule Double-T Aluminium‑Magnesium Alloy With Relief Holes, HV 80 - Metav IndustryLine
Reliable alignment and repeatable reference surfaces are delivered by combining a 3,000 mm span with a lightweight Al‑Mg alloy structure and Grade 2 flatness; order the assembly straightedge directly via Metav Werkzeuge or contact the consultants for dimensioning advice. Assembly straightedge 3000 x 150 x 80 mm, Al‑Mg alloy (Metav IndustryLine) The Assembly straightedge 3000 x 150 x 80 mm serves as a rigid reference for alignment, assembly and mounting tasks in production environments, offering a long, stable datum for large components. 3,000 mm length for large-format components Al‑Mg alloy: robust yet comparatively lightweight Grade 2 tolerance and precise flatness Relief holes for easier handling and fixing High‑capacity reference for large assemblies A long, rigid reference bar reduces setup time and increases repeatability when aligning large parts. The 3,000 mm span provides extensive reach across assemblies and jigs without the need to reposition the tool mid‑process, while the overall profile keeps deformation low under normal handling. The combination of length and profile stiffness makes this straightedge suitable for machine assembly, fixture alignment and assembly verification, delivering a measurable improvement in throughput and fewer reworks compared with ad‑hoc straight edges. Material advantages and handling benefits Constructed from an aluminium‑magnesium alloy, the tool balances strength and manageable mass: at 22 kg it is substantially lighter than equivalent steel members, facilitating safer two‑person handling and simpler in‑shop logistics. The material choice also contributes to a HV 80 surface hardness and consistent mechanical behaviour under moderate loads, which preserves the working surface and supports repeatable positioning. Relief holes across the profile aid clamping and lifting, reducing the time needed to secure the straightedge and simplifying integration into existing fixturing. Precision specification and practical implications Flatness and parallelism control are central to achieving reproducible measurements. The straightedge is manufactured to Grade 2 and offers a documented flatness of 0.048 mm with parallelism at 0.072 mm, values that support precise alignment tasks while remaining pragmatic for workshop use. These tolerances translate into reduced alignment uncertainty and faster verification cycles on large castings, housings or welded assemblies. The documented yield and tensile parameters also indicate the component’s ability to withstand routine workshop stresses without permanent deformation. For tailored advice on specifying the Assembly straightedge M214.749 from Metav IndustryLine and to arrange procurement or delivery from Emmerich, contact Metav Werkzeuge for professional guidance and logistics coordination. Technical data SKU: M214.749 GTIN: 4054469184562 Manufacturer: Metav IndustryLine Facts Length: 3,000 mm Overall height: 150 mm Width: 80 mm Weight: 22 kg Flatness: 0.048 mm Parallelism: 0.072 mm Hardness: HV 80 Yield strength: 110 kg/mm² Tensile strength: 47 kg/mm² Special features Aluminium‑magnesium alloy construction Grade 2 tolerance Relief holes for handling and clamping Designed for alignment and assembly tasks FAQ What length and profile does the straightedge offer? The Assembly straightedge M214.749 provides a 3,000 mm reference length with a 150 mm overall height and 80 mm width, designed to span large components for alignment and assembly. Which material is used and what are the handling advantages? Manufactured from an aluminium‑magnesium alloy, the straightedge delivers a durable surface at a modest mass (22 kg), easing workshop handling while maintaining stiffness for reproducible results. What precision can be expected for alignment work? Grade 2 specification with a measured flatness of 0.048 mm and parallelism of 0.072 mm supports reliable alignment and reduces iterative adjustments during assembly verification. Are the relief holes functional for clamping? Yes, the integrated relief holes permit secure clamping and simplify lifting points, enabling faster fixture integration and safer handling during positioning. Is the straightedge suitable for heavy‑duty shop environments? The material properties including HV 80 surface hardness, plus the documented yield and tensile figures, indicate a robust component intended for regular workshop use in alignment and assembly processes. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3000mm Scale Tape Self-Adhesive 13mm Width Millimetre Markings Black/White - Metav IndustryLine
Data inconsistency detected for item M203.172: the product label describes a self‑adhesive scale tape with a length of 5 m, whereas the technical measurement data supplied corresponds to 3,000 mm (3 m). Because these length values conflict, a reliable, production‑ready product description cannot be generated from the available data. Please verify and reconfirm the correct tape length and any related specifications (for example the advertised 5 m length or the 3 m technical entry). Once the correct measurement is confirmed, a full specification and marketing text can be produced, including accurate technical data, benefits, and ordering guidance. For assistance with data clarification or to submit corrected product details, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930.
300mm Flexible Bendable Scale Both-Side Graduations Top 1/2mm Bottom 1mm Stainless Steel - Metav IndustryLine
Take advantage of a slim, flexible measuring strip that combines precise dual graduations and a corrosion-resistant construction for efficient workshop layout and marking; order the tool directly via Metav Werkzeuge or contact our consultants for tailored advice. Flexible bending scale M214.193 — 300 mm stainless steel, double-sided graduations (Metav IndustryLine) The Flexible bending scale M214.193 is a compact, flexible stainless steel ruler designed for marking and measuring on flat and curved surfaces across metalworking and general workshop tasks, featuring fine 0.5 mm and coarser 1 mm graduations for versatile layout work 300 mm flexible stainless steel strip Double-sided graduations, 0.5 mm and 1 mm Slim cross-section 13 x 0.5 mm for tight spaces Durable corrosion-resistant stainless steel Measure contours and curved parts with ease The flexible design of this bending scale addresses applications where rigid rules fall short: its slim 13 x 0.5 mm cross-section allows the strip to conform to curved profiles while retaining sufficient stiffness for repeatable marking. As a member of the standard range (100–300 mm), the 300 mm length provides a practical balance between reach and handling for everyday machine‑shop and metalworking tasks. This adaptability reduces setup time for layout operations and removes the need for improvised templates, supporting a more efficient production flow. Faster, more reliable marking thanks to clear graduations Equipped with double-sided graduations — a fine top scale at 0.5 mm and a coarser underside at 1 mm — the scale separates fine layout work from quick approximate measurements. The two graduations make it straightforward to switch between detailed scribing and broad alignment without changing tools, reducing handling errors and speeding repetitive tasks. Clear, well-contrasted markings improve legibility under workshop lighting, so lines and reference points remain consistent from part to part. Built for workshop durability and low maintenance Made from stainless steel, the strip resists corrosion and stands up to the knocks and oils of everyday shop use. The narrow profile minimises weight while preserving a usable bending radius, easing handling during marking on small-diameter pipes or panels. The combination of robust material and a flexible execution delivers a low-maintenance measuring aid that extends service life, lowering the need for frequent replacements and supporting reliable long-term availability in the tool kit. Choose the Metav IndustryLine flexible bending scale for precise, repeatable layout work and contact Metav Werkzeuge for procurement or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M214.193 GTIN: 4054469107141 Label: Biegs. Maßstab, 300 x 13 x 0.5 mm beideseitige Skalierungen Facts Length: 300 mm Measuring range: 0–300 mm Cross-section: 13 x 0.5 mm Weight: 0.01 kg Top graduation: 0.5 mm Bottom graduation: 1 mm Tariff number: 90178010 Special features Flexible execution Double-sided scale Material: stainless steel Category: Rulers Brand: Metav IndustryLine FAQ What measuring range does the scale cover? The bending scale covers a measuring range of 0–300 mm and is categorised in the standard 100–300 mm class, suitable for typical workshop layout tasks. Can the strip be used on curved surfaces? Yes, the flexible execution of the Metav IndustryLine bending scale M214.193 allows reliable measuring and marking on curved profiles and small diameters. How fine are the graduations and what are they used for? The tool features fine 0.5 mm graduations on the top edge for detailed marking and 1 mm graduations on the bottom edge for quick alignment and general measurements. Is the scale resistant to corrosion? The scale is manufactured from stainless steel, providing good corrosion resistance for workshop environments. Which SKU should be referenced when ordering or enquiring? Refer to SKU M214.193 (Metav IndustryLine) when placing orders or requesting further technical information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Flexible PET Film Measuring Tape 0.25mm Graduation, 25×0.1mm Cross-Section - Metav IndustryLine
Compact, transparent and precisely graduated — the 0.25 mm scale and 300 mm length make this an economical tool for quick, repeatable measurements in workshops and craft environments. Order the Flexible PET Film Measuring Scale directly via Metav Werkzeuge or ask our consultants if needed. Flexible PET Film Measuring Scale 300 mm (0.25 mm graduation) — Metav IndustryLine A flexible measuring scale made from PET film for distance, length and circumference measurement in workshop and craft applications. Flexible PET-film construction Precise 0.25 mm graduation 300 mm length for standard tasks Transparent and adaptable to contours Precise reads in a compact workshop format The flexible strip provides a 0.25 mm graduation across a 300 mm length, offering finer resolution than common 0.5 mm scales while remaining simple to read. This scale is classified in the Standard range for measuring tools with a maximum span up to 300 mm, making it suitable for general machine‑shop needs where a practical balance of reach and stiffness is required. The clear markings reduce parallax when placed on a flat surface, supporting efficient, repeatable measurements for component layout, model work and quality checks. Flexible form that follows shapes and contours Manufactured from transparent PET, the measuring strip adapts to curved surfaces and irregular outlines that rigid rules cannot follow. Its thin cross-section (25 x 0.1 mm) keeps the profile low while preserving visibility of the underlying geometry, so circumference and contour dimensions can be taken directly from parts and templates. The flexibility reduces the need for improvised solutions and speeds up measurement of pipes, mouldings and other non‑planar items without specialised fixturing. Practical integration into everyday workflows The tape’s transparent material and fine graduation support rapid comparison and transfer of dimensions between drawing, part and fixture. Lightweight and corrosion‑resistant, the strip is easy to clean and stow, which benefits busy workshops where tool reliability and availability matter. Marking and tracing directly on the film is possible with suitable pens, helping to accelerate set‑up and reducing handling times in repetitive tasks. The design emphasises efficiency and clear, verifiable results. Reliability and sourcing you can trust Sourcing from a recognised industrial line provides an assurance of supply continuity and product consistency. The construction from PET film keeps production and logistic costs low without sacrificing utility, enabling a cost‑effective measuring aid that complements precision instruments in the workshop. For purchasers seeking pragmatic measurement solutions, this flexible scale offers a dependable secondary tool for layout, inspection and everyday measuring tasks. For reliable, economical measuring tools from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and ordering — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M203.141 SKU: M203.141 Facts Measurement range: 300 mm Graduation: 0.25 mm Cross-section: 25 x 0.1 mm Special features Material: PET plastic film Transparent, flexible construction For measuring distance, length and circumference Standard classification: workshop 100–300 mm range FAQ How fine is the graduation on the measuring strip? The strip features a 0.25 mm graduation, which delivers finer incremental readings than many standard rules and supports precise layout and comparative measurement. Is the scale suitable for measuring curved surfaces and pipes? Yes, the PET film construction is deliberately flexible and transparent, allowing circumference and contour measurements directly on curved parts. What is the intended application range for this measuring scale? Designed for general workshop and craft use, the strip covers everyday layout, marking and light inspection tasks within a 300 mm reach. Can the strip be written on for marking purposes? Yes, compatible pens can be used for temporary marking on the PET film to transfer dimensions or note reference points during set‑up. Who supplies this product and where can it be ordered? This is part of the Metav IndustryLine; refer to the Metav Werkzeuge sales team for purchasing and product inquiries (SKU M203.141). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Glass Rule For Microscope Alignment 0.5mm Scale, Natron Glass, Boxed - Metav IndustryLine
Combine the optical clarity of soda‑lime glass, the practical 0.5 mm engraved scale and the supplied protective transport case to secure repeatable microscope checks; order the Glass ruler directly via Metav Werkzeuge or consult our advisors for integration advice. Glass ruler M910.523 — verification gauge for microscopes, 0–300 mm (Metav IndustryLine) The Glass ruler is a precision reference gauge for verifying microscopes and other optical inspection equipment in workshop and laboratory environments. Soda‑lime glass body for optical clarity 0–300 mm measuring range, standard size 0.5 mm engraved scale for clear readings Supplied in protective transport case A dependable reference for microscope verification The glass reference serves as a stable visual standard when checking microscope scales and alignment. Classified as Standard (0–300 mm), this format represents the workshop baseline for many inspection benches and quality‑control stations. The accuracy is specified as (1,5+2L/1000) µm, a tolerance that scales with the measured length (L), which means the reference provides predictable deviations across short and medium spans and supports reproducible comparisons during routine optical checks. Built for clarity and consistent handling Manufactured from soda‑lime glass, the gauge offers excellent optical transmission and a flat, scratch‑resistant surface suited to visual comparisons. The physical dimensions — an overall length of 330 mm, a width of 30 mm and a thickness of 5 mm — combine a stable contact area with a compact footprint. The 0.5 mm engraved scale is easy to read beneath microscope optics or on illuminated stages, while the modest weight contributes to safe handling during frequent inspections. Practical delivery for workshop use Delivery includes a protective transport case, which simplifies storage and reduces the risk of transport damage. The lightweight construction and slim profile make the instrument easy to keep at inspection points or to move between benches. Identifiers such as Article number: M910.523 and GTIN: 4061905449048 support traceability and stock management in procurement systems. Supports quality routines and clear documentation As a visual reference, the ruler helps technicians perform quick verifications and document the condition of microscope reticles or stage scales. The combination of a stable glass surface and a finely engraved scale reduces ambiguity in pass/fail checks, helping to keep production and inspection workflows moving with fewer interruptions. For teams aiming to democratise laboratory precision, the reference reflects Metav’s approach of making reliable measurement tools readily available to workshops and service providers. Contact Metav Werkzeuge for tailored advice from Emmerich and arrange supply of the Glass ruler M910.523 with fast, dependable delivery Technical Data Article number: M910.523 GTIN: 4061905449048 Material: soda‑lime glass Measuring range: 0–300 mm Scale: 0.5 mm Overall length: 330 mm Width: 30 mm Thickness: 5 mm Weight: 0.12 kg Facts Accuracy: (1,5+2L/1000) µm Category: Lineal / verification gauge Intended use: microscope verification and optical inspections Packaging: supplied in protective transport case Special features Engraved scale for repeatable readings Low‑mass, flat glass body for optical checks Compact format for bench or lab use Traceability via GTIN and article number FAQ What is the primary use of this glass reference? The glass reference is designed for verification of microscopes and optical inspection equipment; the Glass ruler M910.523 provides a stable, readable scale for visual comparison and alignment. How is the accuracy specified and interpreted? Accuracy is given as (1,5+2L/1000) µm, where L denotes the measured length in millimetres; this expresses a tolerance that increases proportionally with measurement length. Does the instrument come ready for immediate use? Yes, the gauge is supplied ready for use and comes in a protective transport case to prevent handling and shipping damage. What advantages does the soda‑lime glass body bring? Soda‑lime glass offers excellent optical clarity and a flat, durable surface, improving visibility under microscope optics and ensuring consistent contact during checks. Is this format suitable for workshop and laboratory environments? The 0–300 mm range and compact dimensions make it well suited to routine bench checks in workshops, laboratories and inspection areas where standard‑range references are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Glass Rule For Microscope Verification Plastic Case - Metav IndustryLine
Take advantage of the combination of a precise 0–300 mm measurement range, a fine 0.1 mm graduation and the dimensional stability of soda‑lime glass for reliable microscope verification; order directly via Metav Werkzeuge or ask the consultants for specification guidance. Glass ruler M910.257 — glass rule for microscope verification, 0–300 mm range, 0.1 mm graduations (Metav IndustryLine) The Glass ruler M910.257 is a precision glass rule designed for verification and calibration of optical instruments and fine measurement tasks over a 0–300 mm span. 0–300 mm measurement range 0.1 mm fine graduation Soda‑lime glass construction Delivered in protective case Accurate optical reference that simplifies microscope checks The instrument serves as a stable optical reference: the (1.5 + 2L/1000) µm formula defines the metrological tolerance across the measuring length and allows users to estimate expected deviation at any point along the scale. With a 0–300 mm measuring span and 0.1 mm divisions, the rule provides a readable, application‑oriented resolution for routine checks and comparative measurements. This clarity in specification reduces ambiguity in inspection protocols and supports efficient decision‑making in the quality workflow. Robust material and compact form for consistent handling Made from soda‑lime glass, the rule balances rigidity and fine edge definition to keep graduations sharp and reproducible. The overall length of 330 mm, combined with a width of 30 mm and a thickness of 5 mm, yields a low‑mass reference (approx. 0.12 kg) that is easy to manoeuvre yet stable against minor flexing. Delivery in a protective case ensures safe transport and preserves the scale during storage, which is particularly valuable when the rule is used intermittently across labs or production cells. Integrates with optical inspection routines and workshop processes As an instrument intended for microscope verification and optical comparisons, the rule is straightforward to incorporate into established procedures: lay the rule on the specimen stage or reference plane, align the microscope field and document deviations against the printed scale. The clear 0.1 mm graduations aid visual alignment and quick documentation, supporting traceable inspection records. For facilities seeking a reliable visual standard without complex electronics, this glass rule provides a practical, low‑maintenance option that complements digital and analogue measurement systems. For precise microscope verification using the Glass ruler M910.257, contact Metav Werkzeuge in Emmerich for technical advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M910.257 GTIN: 4061905449031 Material: Soda‑lime glass (Natronglas) Total length: 330 mm Measurement range: 0–300 mm Scale division: 0.1 mm Accuracy: (1.5 + 2L/1000) µm Weight: 0.12 kg Facts Width: 30 mm Thickness: 5 mm Intended use: Microscope verification and optical reference Category: Lineals / Rulers Special features Delivered in a protective case for transport Clear, engraved graduations readable at a glance SKU: M910.257 FAQ How precise is the glass ruler for microscope verification? The stated tolerance is given by the formula (1.5 + 2L/1000) µm; this defines the expected deviation across the length of the Glass ruler M910.257 and enables reliable comparative verification of optical instruments. Can the rule be used directly on a microscope stage? Yes, the design and dimensions of the Glass ruler M910.257 allow direct placement on many microscope stages for visual alignment and quick scale checks. What protection is provided during transport? The rule is supplied in a protective case suitable for transport, which reduces the risk of damage to the graduations and helps preserve the optical reference surface. Is the material suitable for workshop use and repeated handling? The soda‑lime glass construction combines sharp graduation definition with sufficient mechanical stability for routine handling; the low mass (approx. 0.12 kg) and compact form factor aid practical use in inspection environments. Which category does this instrument belong to and what is it best used for? Listed among rulers/lineals, the Glass ruler M910.257 is best suited as an optical reference for microscope verification, scale checks and other fine visual inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Rule Magnifier With 10x Guided Lens Parallax-Free Reading In Plastic Case - Metav IndustryLine
Reliable measurement and detailed inspection are combined in a stainless-steel ruler with a parallax-free scale and an integrated 10× guided loupe, making routine checks faster and more dependable; the tool covers the standard range up to 300 mm. Order the Ruler Magnifier directly via Metav Werkzeuge or ask our consultants if needed. Ruler Magnifier M903.207 — stainless-steel scale with 10× guided loupe Ruler Magnifier M903.207 is a durable measuring aid that pairs a parallax-free scale with a guided magnifier for precise workshop and inspection tasks up to 300 mm. Stainless-steel scale for workshop durability Parallax-free reading for accurate alignment Integrated 10× guided loupe for detail inspection Measurement range up to 300 mm Precise routine measurement with reliable results The combination of a parallax-free scale and a finely divided rule ensures repeatable readings in everyday production and inspection tasks. With a stated accuracy of 0.02 mm and a scale division of 0.1 mm, the instrument bridges the gap between coarse workshop checks and finer visual inspection. The stainless construction gives dimensional stability during handling, while the clear graduations reduce interpretation errors — a practical solution for machine shops and quality stations that demand consistent, traceable outcomes. Close inspection made comfortable and effective An integrated guided loupe multiplies visual detail without compromising alignment: the 10× magnification lens is guided to run parallel with the rule so that focus and measurement coincide. This arrangement minimises parallax and accelerates tasks such as thread checks, edge inspections and fine marking. The optical aid enables confident identification of small features while keeping the measurement reference directly in view, which is especially beneficial when component tolerances require careful visual verification. Robust design for daily workshop use Built from stainless steel, the instrument withstands regular handling and the typical rigours of a production environment. The overall length of 350 mm complements the measurement range, offering a comfortable balance between reach and rigidity. The solid feel and corrosion resistance help preserve scale legibility and mechanical flatness over time, reducing the need for premature replacement and ensuring that the device stays serviceable under continuous use. Fits into established metrology routines Classified for the standard range (up to 300 mm), the instrument is well suited to general engineering applications, from maintenance checks to assembly verification. Delivery in a transport case protects the tool in transit and storage, keeping optics and scale undamaged. Clear numerical resolution and stable guiding make the device a practical addition to inspection benches where quick, repeatable measurements and visual detail are required. For specification advice or to secure the Metav IndustryLine Ruler Magnifier M903.207 from our Emmerich stock, contact Metav Werkzeuge for prompt assistance Technical Data Article number: M903.207 GTIN: 4061905448966 Category: Lineale Facts Measuring range: 0–300 mm Overall length: 350 mm Accuracy: 0.02 mm Scale division: 0.1 mm Magnification: 10× Special features Material: stainless steel Parallax-free reading Delivered in a transport case Classification: Standard range (up to 300 mm) Guided loupe for close inspection FAQ What measurement range does the instrument cover? The ruler covers a measuring range of 0–300 mm suitable for standard workshop and inspection tasks with the Ruler Magnifier M903.207 from Metav IndustryLine. How precise is the scale on this measuring aid? The device offers an accuracy of 0.02 mm and a scale division of 0.1 mm, providing dependable readings for routine quality checks. Is the magnifier integrated or removable? The guided loupe is integrated to maintain alignment with the rule; the guided design ensures consistent focus and minimal parallax during inspection with the Metav IndustryLine unit. How is the tool protected during transport? The instrument is supplied in a transport case to protect the lens and scale, making it suitable for workshop transfer and storage. Which applications are ideal for this ruler magnifier? It is designed for general machine-shop inspection, assembly verification and detailed visual checks where a parallax-free rule and magnification improve accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Stainless Steel Rule Double-Sided Scales Top 1/2mm Bottom 1mm Rigid - Metav IndustryLine
Take advantage of the combination of corrosion‑resistant stainless steel, rigid 30 × 1.0 mm profile and double‑sided graduations for clear, repeatable layout and marking. Order the rule directly via Metav Werkzeuge or consult our specialists for application advice. Stainless steel rule M214.183 — rigid 300 × 30 × 1 mm steel rule with double‑sided graduations (½ mm / 1 mm) The Stainless steel rule M214.183 is a rigid workshop rule offering a clear, double‑scaled layout surface for marking, measuring and quality checks across general metalworking and fabrication tasks. Rigid profile 30 × 1.0 mm for stability Both‑sided graduations ½ mm and 1 mm Corrosion‑resistant stainless steel construction Compact 300 mm length for universal use Reliable base for accurate layout and marking The stainless steel construction delivers durability and resistance to workshop environments while keeping the rule dimensionally stable. The top scale with ½ mm divisions and the lower scale with 1 mm divisions allow for fine positioning and quick coarse checks respectively, simplifying scribing and alignment. This translates into fewer measurement steps and a faster workflow when transferring dimensions from drawings to components. Stiff cross‑section for repeatable measurements A 30 × 1.0 mm cross‑section gives the rule a rigid profile that reduces flex during use. The increased stiffness improves repeatability for edge‑based measurements and marking operations, especially when used as a straightedge or reference on workpieces. The design therefore supports higher process reliability in everyday shop use without requiring elaborate fixturing. Standard‑range length for workshop versatility With a measuring range up to 300 mm, the rule sits in the standard class ideal for general machinery and metalworking. This length strikes a balance between reach and handling: it is long enough for most component layouts yet compact enough for one‑handed use and storage. The combination of fine and coarse graduations makes the rule suitable for both precision tasks and faster setup checks. Clear benefits for everyday industrial use The slim 1.0 mm thickness keeps weight low while maintaining a dependable straight edge; the rule weighs approximately 0.10 kg, making it easy to handle repeatedly during production runs. The material choice ensures corrosion resistance for long service life, reducing replacement frequency and supporting a consistent quality baseline on the workshop floor. For dependable, everyday measuring and marking choose the Metav IndustryLine stainless steel rule M214.183 — contact Metav Werkzeuge for ordering or technical consultation at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M214.183 GTIN: 4054469107073 Material: stainless steel Dimensions: 300 × 30 × 1 mm Cross‑section: 30 × 1.0 mm Weight: 0.10 kg Tariff number: 90178010 Facts Measuring range: 0–300 mm Length: 300 mm Width: 30 mm Thickness: 1.0 mm Weight: 0.10 kg Special features Both‑sided scalings: top ½ mm, bottom 1 mm Rigid execution for reduced flex Corrosion‑resistant stainless steel Compact format suitable for workshop layout FAQ What length is the rule and which graduations does it have? The stainless steel rule M214.183 measures 300 mm and features double‑sided graduations: ½ mm on the top edge and 1 mm on the lower edge for flexible marking and measuring tasks. Is the rule suitable for metalworking and marking operations? Yes. The rigid 30 × 1.0 mm profile and stainless steel material make the rule well suited to workshop marking, layout work and routine checks in metalworking environments. How does the profile support measurement repeatability? The increased cross‑section stiffness reduces flex and deformation during use, ensuring more repeatable straight‑edge measurements and easier transfer of scribed lines with the M214.183. Does the rule resist corrosion in a workshop environment? The rule is made from stainless steel, which provides corrosion resistance appropriate for general workshop conditions and extends service life compared with untreated steels. Can this rule be used for precision inspection tasks? As a durable layout and marking rule the M214.183 supports precise visual alignment and scribing; for micrometre‑level inspection, dedicated precision instruments are recommended as a complement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Steel Rule Both-Sides Scales Top 1/2mm Bottom 1mm Rigid Stainless Steel - Metav IndustryLine
Take advantage of a rigid stainless‑steel construction with clear double‑sided graduations and a compact 300 x 19 x 1 mm format for repeatable layout and inspection work. Order the steel scale directly via Metav Werkzeuge or contact their consultants for application advice and fast delivery. Steel scale M214.187 — rigid stainless‑steel rule, 300 x 19 x 1 mm, double‑sided graduations — Metav IndustryLine The Steel scale M214.187 is a rigid stainless‑steel rule designed for precise linear measurements and workshop marking tasks where a compact, durable instrument is required Rigid stainless‑steel construction Double‑sided graduations 1/2 mm and 1 mm Compact 300 x 19 mm format Low weight 80 g Reliable graduations for marking and inspection This rigid stainless‑steel rule delivers clear, repeatable linear readings thanks to its double‑sided graduations with a fine 1/2 mm scale on the top edge and a 1 mm scale on the bottom edge. The contrasting divisions permit both fine layout work and quick coarse checks without swapping tools. Manufactured from stainless steel, the rule resists corrosion in workshop environments and retains legible markings over long service intervals, making it suitable for frequent use on benches and mounting plates. Compact design that improves workflow At 300 x 19 x 1 mm, the format combines useful reach with easy handling and storage: the slim profile slides into pockets or toolboxes, while the rigid cross‑section minimises twist during scribing and measuring. The low mass of around 80 g reduces handling fatigue during repetitive tasks and supports faster marking cycles. For production and maintenance settings this translates into fewer interruptions, fewer measurement transfers and a smoother workflow. Proven supply and quality for professional shops The scale is presented as a straightforward, durable measuring aid for everyday workshop and inspection duties. Supplied under the Metav IndustryLine label, the product benefits from Metav’s commitment to accessible precision and a reliable European supply chain. Metav’s position as a precision partner with decades of experience and a broad product range supports consistent stock levels and dependable delivery for trade and industry customers. For professional measurement needs, request the M214.187 steel scale from Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and procurement support Technical data Article number: M214.187 GTIN: 4054469107110 eClass: 21160101 Tariff number: 90178010 Facts Measuring range: 0–300 mm Cross section: 19 x 1.0 mm Weight: 0.08 kg Special features Material: stainless steel Rigid design Double‑sided graduations — top 1/2 mm, bottom 1 mm Category: steel rule / workshop scale FAQ What material is the rule made from? The rule is manufactured from stainless steel, giving corrosion resistance and long‑term legibility for workshop use. What measurement increments are provided? Both a 1/2 mm scale (top edge) and a 1 mm scale (bottom edge) are engraved for versatile fine and coarse measuring. Is the 300 mm size suitable for workshop layout tasks? Yes — the 300 x 19 mm format balances reach and stiffness, making it well suited for marking, inspection and general workshop measuring. How does Metav guarantee product availability and quality? Metav IndustryLine items are supplied through Metav Werkzeuge’s European logistics and quality processes, backed by the company’s extensive product range and experience. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Working Rule 40×5mm With mm Graduation, DIN 866/B - Metav IndustryLine
Take advantage of the combination of ground special steel, millimetre graduation and DIN conformity for dependable workshop checks and repeatable layout work; order the item directly via Metav Werkzeuge or consult our specialists for application advice. Steel rule 300 x 40 x 5 mm DIN 866/B — Metav IndustryLine, ground special-steel working scale The Steel rule 300 x 40 x 5 mm DIN 866/B is a ground special-steel working scale with millimetre graduation, designed for precise linear measurement and layout tasks in metalworking and general workshop environments Ground special-steel construction Millimetre graduation for precise reading Conforms to DIN 866/B standard Format 300 x 40 x 5 mm for workshop use Industrial-grade construction for repeatable results The rule is manufactured from ground special steel, a choice that combines wear resistance with a stable measuring edge, delivering repeatable results across many cycles of use. The hardened and ground surface reduces edge wear and helps maintain consistent contact geometry during comparative and layout measurements. For routine inspection and workshop tasks the robust build translates into fewer replacements and less downtime, supporting a steady production flow without sacrificing measurement reliability. Clear graduations and DIN traceability for dependable checks Equipped with a millimetre graduation, the instrument provides an immediate visual readout suitable for standard machining and inspection operations where millimetre resolution is required. Compliance with DIN 866/B signals adherence to recognised industrial specifications, simplifying specification checks and procurement for quality management processes. The standardised marking and layout make the rule easy to integrate into shop-floor protocols and documentation, aiding traceability when measurements need to be referenced in quality records. Practical format and everyday workshop advantages The 300 mm working length places this rule in the standard size class, offering the best balance between reach and stiffness for general engineering and toolroom tasks. The 40 mm width and 5 mm thickness yield a firm profile that resists bending during single-handed use and layout operations, allowing fast and reliable alignment of components, centre-finding, and marking. Its format suits bench work as well as portable checks, making it a versatile addition to the measurement set for machinists, fitters and inspectors. For reliable workshop measurement choose the Metav IndustryLine steel rule — order through Metav Werkzeuge or contact our consultants at Metav Werkzeuge GmbH for tailored advice and procurement support. Technical data Article number: M214.711 GTIN: 4054469109534 ECLASS: 21160101 Dimensions: 300 x 40 x 5 mm Material: special steel, ground Standard: DIN 866/B Tariff number: 90178010 Facts Length: 300 mm Width: 40 mm Thickness: 5 mm Category: Lineale Weight: see product specification Special features Millimetre graduation Ground special-steel construction Conforms to DIN 866/B Intended for workshop measurement and layout FAQ What is the primary material and finish of this rule? The steel rule is made from ground special steel, providing a wear-resistant measuring edge and a stable surface finish suited to workshop use. Is the rule suitable for routine workshop inspection and marking? Yes — the 300 mm format and millimetre graduation make it well suited to everyday inspection, marking and layout tasks in metalworking and general engineering. Does this product comply with recognised standards? The instrument conforms to DIN 866/B, ensuring standardised graduations and layout for industrial applications. Can the rule be used for quality documentation and traceability? Its compliance with DIN 866/B and the clear millimetre graduation support consistent recording of measurements for quality records and process documentation. What is the product SKU for ordering? The article is listed as SKU M214.711 under the Metav IndustryLine range and can be ordered via Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Accurate checks with precision straightedges
Precision straightedges are high-accuracy measuring tools designed to verify flatness and straightness across surfaces. Available in several lengths and finished from durable metals, these instruments provide a simple, repeatable method for alignment and inspection in industrial settings.
How precision straightedges work and where they are used
A precision straightedge is laid against a surface to reveal deviations from true flatness or a straight line, with fine graduations enabling careful assessment of run-out and planar error. Typical applications include mechanical engineering, electronics, optics and microscopy, machine tool build and quality control, where reliable visual or feeler-gauge inspection prevents assembly issues and functional failure.
Key advantages that cut waste and speed up production
- high accuracy and stable construction reduce measurement uncertainty and help maintain production tolerances.
- stainless steel or other precision metals ensure long service life and corrosion resistance.
- fine graduations and etched scales allow precise readings and repeatable checks.
- various lengths suit bench work as well as larger components, shortening setup time.
- simple handling lowers inspection time and contributes to fewer rejects and rework.
Why Metav is the practical choice for precision straightedges
Metav combines decade-long expertise with a broad range of measurement tools, making it a pragmatic partner for workshop and production buyers. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav operates from Emmerich as a quality filter for the european market, offering consistent availability and straightforward order processing. For those seeking a reliable source of precision straightedges and complementary measuring instruments, Metav’s range and technical information help select the correct specification for the intended inspection task.
In brief
Precision straightedges deliver fast, reliable assessments of flatness and straightness across industries, improving quality control and reducing scrap while being simple to use and maintain.
FAQ
What materials are precision straightedges typically made from?
Precision straightedges are commonly manufactured from stainless steel or other precision metals to ensure stability, wear resistance and longevity in industrial use.
In which industries are precision straightedges most valuable?
Precision straightedges are widely used in mechanical engineering, electronics, optics and microscopy, machine tool construction and general quality control where geometric accuracy is critical.
How is a precision straightedge used to check flatness?
Place the precision straightedge on the surface and inspect gaps visually or with feeler gauges; fine graduations and a straight reference edge make deviations from flatness evident for correction or further machining.
Are different lengths available for precision straightedges?
Yes, precision straightedges are offered in various lengths to match bench-top inspections as well as larger component checks, allowing selection of the most efficient tool for each application.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com