Precision rulers for accurate alignment
Precision rulers are specialised measuring tools used to check flatness and straightness in metalworking and inspection processes, providing reliable alignment and verification for assemblies and machined surfaces. They are typically made from stainless steel or precision metals and serve machining, optics, electronics and quality control applications where tight tolerances are required; using a precision ruler improves repeatability and reduces non‑conformances. Common synonyms include straight edge and flatness gauge, and the durable construction alongside fine graduations ensures the tool remains accurate over years of workshop use.
300mm Steel Rule Both-Sides Scales Top 1/2mm Bottom 1mm Rigid Stainless Steel - Metav IndustryLine
Take advantage of a rigid stainless‑steel construction with clear double‑sided graduations and a compact 300 x 19 x 1 mm format for repeatable layout and inspection work. Order the steel scale directly via Metav Werkzeuge or contact their consultants for application advice and fast delivery. Steel scale M214.187 — rigid stainless‑steel rule, 300 x 19 x 1 mm, double‑sided graduations — Metav IndustryLine The Steel scale M214.187 is a rigid stainless‑steel rule designed for precise linear measurements and workshop marking tasks where a compact, durable instrument is required Rigid stainless‑steel construction Double‑sided graduations 1/2 mm and 1 mm Compact 300 x 19 mm format Low weight 80 g Reliable graduations for marking and inspection This rigid stainless‑steel rule delivers clear, repeatable linear readings thanks to its double‑sided graduations with a fine 1/2 mm scale on the top edge and a 1 mm scale on the bottom edge. The contrasting divisions permit both fine layout work and quick coarse checks without swapping tools. Manufactured from stainless steel, the rule resists corrosion in workshop environments and retains legible markings over long service intervals, making it suitable for frequent use on benches and mounting plates. Compact design that improves workflow At 300 x 19 x 1 mm, the format combines useful reach with easy handling and storage: the slim profile slides into pockets or toolboxes, while the rigid cross‑section minimises twist during scribing and measuring. The low mass of around 80 g reduces handling fatigue during repetitive tasks and supports faster marking cycles. For production and maintenance settings this translates into fewer interruptions, fewer measurement transfers and a smoother workflow. Proven supply and quality for professional shops The scale is presented as a straightforward, durable measuring aid for everyday workshop and inspection duties. Supplied under the Metav IndustryLine label, the product benefits from Metav’s commitment to accessible precision and a reliable European supply chain. Metav’s position as a precision partner with decades of experience and a broad product range supports consistent stock levels and dependable delivery for trade and industry customers. For professional measurement needs, request the M214.187 steel scale from Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and procurement support Technical data Article number: M214.187 GTIN: 4054469107110 eClass: 21160101 Tariff number: 90178010 Facts Measuring range: 0–300 mm Cross section: 19 x 1.0 mm Weight: 0.08 kg Special features Material: stainless steel Rigid design Double‑sided graduations — top 1/2 mm, bottom 1 mm Category: steel rule / workshop scale FAQ What material is the rule made from? The rule is manufactured from stainless steel, giving corrosion resistance and long‑term legibility for workshop use. What measurement increments are provided? Both a 1/2 mm scale (top edge) and a 1 mm scale (bottom edge) are engraved for versatile fine and coarse measuring. Is the 300 mm size suitable for workshop layout tasks? Yes — the 300 x 19 mm format balances reach and stiffness, making it well suited for marking, inspection and general workshop measuring. How does Metav guarantee product availability and quality? Metav IndustryLine items are supplied through Metav Werkzeuge’s European logistics and quality processes, backed by the company’s extensive product range and experience. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Working Rule 40×5mm With mm Graduation, DIN 866/B - Metav IndustryLine
Take advantage of the combination of ground special steel, millimetre graduation and DIN conformity for dependable workshop checks and repeatable layout work; order the item directly via Metav Werkzeuge or consult our specialists for application advice. Steel rule 300 x 40 x 5 mm DIN 866/B — Metav IndustryLine, ground special-steel working scale The Steel rule 300 x 40 x 5 mm DIN 866/B is a ground special-steel working scale with millimetre graduation, designed for precise linear measurement and layout tasks in metalworking and general workshop environments Ground special-steel construction Millimetre graduation for precise reading Conforms to DIN 866/B standard Format 300 x 40 x 5 mm for workshop use Industrial-grade construction for repeatable results The rule is manufactured from ground special steel, a choice that combines wear resistance with a stable measuring edge, delivering repeatable results across many cycles of use. The hardened and ground surface reduces edge wear and helps maintain consistent contact geometry during comparative and layout measurements. For routine inspection and workshop tasks the robust build translates into fewer replacements and less downtime, supporting a steady production flow without sacrificing measurement reliability. Clear graduations and DIN traceability for dependable checks Equipped with a millimetre graduation, the instrument provides an immediate visual readout suitable for standard machining and inspection operations where millimetre resolution is required. Compliance with DIN 866/B signals adherence to recognised industrial specifications, simplifying specification checks and procurement for quality management processes. The standardised marking and layout make the rule easy to integrate into shop-floor protocols and documentation, aiding traceability when measurements need to be referenced in quality records. Practical format and everyday workshop advantages The 300 mm working length places this rule in the standard size class, offering the best balance between reach and stiffness for general engineering and toolroom tasks. The 40 mm width and 5 mm thickness yield a firm profile that resists bending during single-handed use and layout operations, allowing fast and reliable alignment of components, centre-finding, and marking. Its format suits bench work as well as portable checks, making it a versatile addition to the measurement set for machinists, fitters and inspectors. For reliable workshop measurement choose the Metav IndustryLine steel rule — order through Metav Werkzeuge or contact our consultants at Metav Werkzeuge GmbH for tailored advice and procurement support. Technical data Article number: M214.711 GTIN: 4054469109534 ECLASS: 21160101 Dimensions: 300 x 40 x 5 mm Material: special steel, ground Standard: DIN 866/B Tariff number: 90178010 Facts Length: 300 mm Width: 40 mm Thickness: 5 mm Category: Lineale Weight: see product specification Special features Millimetre graduation Ground special-steel construction Conforms to DIN 866/B Intended for workshop measurement and layout FAQ What is the primary material and finish of this rule? The steel rule is made from ground special steel, providing a wear-resistant measuring edge and a stable surface finish suited to workshop use. Is the rule suitable for routine workshop inspection and marking? Yes — the 300 mm format and millimetre graduation make it well suited to everyday inspection, marking and layout tasks in metalworking and general engineering. Does this product comply with recognised standards? The instrument conforms to DIN 866/B, ensuring standardised graduations and layout for industrial applications. Can the rule be used for quality documentation and traceability? Its compliance with DIN 866/B and the clear millimetre graduation support consistent recording of measurements for quality records and process documentation. What is the product SKU for ordering? The article is listed as SKU M214.711 under the Metav IndustryLine range and can be ordered via Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Workshop Rule With Bevel And Millimetre Scale - Metav IndustryLine
Take advantage of precise 300 mm measuring length, a ground special-steel finish and a faceted edge for reliable alignment in daily shop use; order directly via Metav Werkzeuge or consult their specialists for procurement and application advice. Workshop ruler 300 x 40 x 5 — faceted edge, mm graduation (Metav IndustryLine) The Workshop ruler 300 x 40 x 5 is a compact, ground measuring rule intended for layout, marking and straightforward dimensional checks in metalworking and general workshop environments. 300 mm measuring range Ground special steel construction Faceted edge for accurate alignment Precision that reduces rework and speeds production The ruler offers a 300 mm measuring span combined with a ground special steel surface and clear mm graduation, delivering consistent readings for layout and quick checks. The faceted edge supports accurate alignment against profiles and edges, which reduces setup time and the risk of repeated work. Built for workshop routines, the gauge translates simple, verifiable dimensions into dependable data for fitting and assembly, so measurements become a reproducible part of the production process rather than an occasional guess. Robust profile for everyday handling and stability With compact dimensions of 300 x 40 x 5 mm, the tool balances reach with stiffness to remain stable during one-handed use and marking tasks. The ground finish resists wear and keeps the graduation legible over many cycles, while the faceted geometry aids clean contact with workpieces. Its low-profile construction is easy to handle and store in a toolbox or lay on a workbench without catching or tipping, supporting smooth workflows and fewer interruptions on the shop floor. Fits into inspection routines and stock management The item is traceable via GTIN: 4054469109671 and listed under Metav IndustryLine, making it straightforward to reference in procurement and quality documentation. As a workshop-grade measuring rule, it is suitable for production checks, marking out and secondary inspection tasks where a robust, easy-to-read scale is preferred over more complex instruments. Availability through Metav ensures consistent supply and the option to consolidate tool purchases for workshop standardisation. For tailored advice or to procure the Metav IndustryLine workshop ruler (SKU M214.731), contact Metav Werkzeuge for specification assistance and order handling at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M214.731 GTIN: 4054469109671 Category: Rulers (Lineale) Dimensions: 300 x 40 x 5 mm Facts Measurement range: 300 mm Tariff code: 90178010 Material: special steel, ground Special features Faceted edge for alignment mm graduation Ground surface for wear resistance FAQ What is the measuring length and format of the ruler? The workshop ruler has a measuring length of 300 mm and a clear mm graduation; it is supplied as a rigid, flat rule ideal for layout and marking tasks. What material is the rule made from and how durable is it? Made from special steel, ground, the rule combines dimensional stability with a wear-resistant finish suited to frequent workshop use. Is this ruler suitable for marking and edge alignment? Yes — the faceted edge and flat profile make the tool well suited to marking out and aligning against edges during fitting and assembly operations. How is the product identified for procurement and documentation? The product is listed as Workshop ruler 300 x 40 x 5 under Metav IndustryLine with SKU M214.731 and GTIN 4054469109671 for traceability in purchasing and stock systems. Can the rule be used on the shop floor for routine checks? The construction and legibility of the graduation make the rule practical for routine dimensional checks, quick verification and workshop layout duties. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x40x5 mm Workshop Rule With Chamfer, Ungraduated, Hardened Ground Special Steel - Metav IndustryLine
Take advantage of a compact, durable workshop rule that combines a 300 x 40 x 5 mm hardened profile with a ground special steel finish and a chamfered edge for precise scribing; order the ruler directly via Metav Werkzeuge or ask our consultants if advice is required. Workshop Ruler M214.721 — 300 x 40 x 5 mm, chamfered and ungraduated (Metav IndustryLine) Workshop Ruler M214.721 is a robust reference rule intended for layout, marking and fixture alignment in metalworking and general workshop environments, offering a chamfered edge for clean scribe lines and an ungraduated profile for bespoke marking tasks. 300 x 40 x 5 mm robust profile Ground special steel construction Chamfered edge for precise scribing Ungraduated for tailored marking work Precise layout and repeatable reference for workshop use The compact 300 x 40 x 5 mm profile delivers a stable reference bar that is easy to position and hold during layout operations. Manufactured from ground special steel, the rule resists wear and maintains a flat face for reliable contact with workpieces. The absence of pre-etched graduations makes this profile ideal where bespoke markings or fixture-dependent references are required rather than fixed measurement increments. In production environments, the combination of a solid cross-section and a ground finish reduces play at the contact surface, which supports repeatable scribing and alignment tasks during fixture set-up and part machining. Edge geometry engineered for clear markings and practical handling A chamfered edge provides a defined bevel for scribing and prevents burrs from catching against the workpiece; this geometry aids in drawing precise layout lines while protecting the operator’s hand and the rule’s edge from inadvertent damage. The rule’s finished edges also simplify clamping and seating against straight edges or guide rails. For workshops that prioritise quick, accurate marking over direct measuring, the ungraduated profile supports custom templates and fixtures without visual clutter, while the machined surfaces help maintain straightness over prolonged use. Robust construction that supports efficient workflows The combination of a dense steel body and a ground surface reduces the need for frequent dressing or replacement, contributing to lower lifetime maintenance requirements. The heavy-duty nature of the profile makes it suitable as a stable datum for assembly jigs and layout tables, supporting quicker set-up times and fewer alignment checks. Supply chain reliability is supported by Metav IndustryLine’s distribution: sourcing this reference rule from a single industrial supplier simplifies procurement and ensures consistent quality across batches — an advantage for workshops aiming to standardise tooling and reduce variability in routine processes. Contact Metav Werkzeuge in Emmerich for stock availability and tailored advice on the Metav IndustryLine workshop ruler (M214.721); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M214.721 GTIN: 4054469109602 Dimensions: 300 x 40 x 5 mm Material: Special steel, ground Facts ECLASS: 21170122 Tariff code: 90178010 Manufacturer: Metav IndustryLine Special features Chamfered edge Ungraduated (no scale) Image available: m214721-main.jpg FAQ What is the primary use of this workshop ruler? The Metav IndustryLine Workshop Ruler M214.721 is intended as a stable reference and scribing aid for layout, fixture alignment and marking tasks in workshops and machine shops. Can the rule be used for precision dimensional measurement? As the rule is supplied ungraduated, it serves best as a reference datum and scribing guide rather than a direct measuring instrument with engraved increments. What advantages does the ground steel finish provide? A ground special steel finish improves flatness and wear resistance, ensuring the reference face remains true for repeatable layout and alignment activities. Is the chamfered edge suitable for scribing and template work? Yes, the chamfered edge creates a clean bevel for precise scribe lines and simplifies clamping against straight edges or guides during template transfers. Which workshop environments benefit most from this profile? The robust 300 x 40 x 5 mm profile is suited to metalworking shops, toolrooms and production cells where reliable reference bars are required for assembly, marking and fixture set-up tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
305mm Rafter Angle RS 18 Aluminium 0°–90° Adjustable, Leg Length 305mm - SOLA
Take advantage of a compact, durable aluminium angle that delivers precise 0–90° marking and a generous 305 mm leg for larger rafters; the combination of accuracy, clear graduations and sturdy build supports efficient layout work and reliable results — order or request procurement support via Metav Werkzeuge. Rafter Angle RS 30 – aluminium rafter angle bracket, 305 mm leg, 0–90° (SOLA) The Rafter Angle RS 30 is an aluminium rafter angle bracket designed for measuring and marking rafters and structural timbers with an adjustable range from 0° to 90° and a long 305 mm leg for extended reach Robust aluminium construction 305 mm leg length for larger timbers Adjustable from 0° to 90° for versatile marking Clear metric graduations for precise layout Accurate angle setting to speed up structural layout The long aluminium leg and adjustable joint make this angle bracket a practical tool for repeatable, precise angle transfers on timber and construction components. The 305 mm leg provides reach across wider rafters, while the adjustable hinge spanning 0–90° allows rapid setting of common roof and framing angles without extra calculation. For workshop managers and site carpenters, this translates into fewer measuring steps and less rework, promoting faster progress on routine layout tasks and reducing material waste. Practical design for everyday workshop and site use Constructed in aluminium, the tool is both lightweight and robust for handling on site; reduced weight eases repetitive use while a sturdy profile resists bending. The clear metric graduations etched along the leg support accurate marking even in low light and shorten the time spent transferring dimensions. The simple hinge mechanism minimises maintenance and keeps the device ready for work. For users unfamiliar with technical metrology terms: the graduations are standard metric marks that show millimetres and degrees, enabling direct transfer from drawings to timber without conversion. Built for reliable results and straightforward workflows This rafter square combines straightforward mechanics with practical dimensions, supporting consistent results across multiple tasks such as rafter layout, angle checking and timber marking. The robust construction and clear markings help maintain precision over repeated use, which is particularly valuable in production environments where repeatability matters. For purchasing teams looking to simplify tool lists, this compact angle bracket covers several measuring needs in one device and integrates well into a workshop’s standard kit. Contact Metav Werkzeuge for procurement and technical advice on the SOLA rafter angle RS 30; Metav’s specialists in Emmerich can provide ordering and compatibility guidance by email or phone Technical Data Article number: 4000857039NW Model: RS 18 SKU: 4000857039NW Label: Sparrenwinkel RS 30 Schenkel-L.305mm 0Grad-90Grad Alu.SOLA Facts Leg length: 305 mm Angle range: 0–90° Packaging unit: 1 Special features Material: Aluminium Product type: Rafter angle (rafter angle bracket) Brand: SOLA FAQ What materials is this rafter angle suitable for? The rafter angle RS 30 is designed primarily for timber layout and marking; the aluminium construction is durable for typical carpentry and site use. How is the leg length specified and what does it mean for use? The tool has a 305 mm leg, which provides extended reach for marking across wider rafters and timbers without repositioning the bracket. Can the angle be set to intermediate values between 0° and 90°? Yes, the adjustable hinge allows continuous settings across the 0–90° range for precise transfer of any intermediate angle. Is there a model or SKU reference for ordering? The product is listed under SKU 4000857039NW and referenced as model RS 18 for procurement and stock purposes. Are the graduations metric and suitable for direct transfer from drawings? The bracket features clear metric graduations suitable for direct transfer of millimetre dimensions from drawings to timber during layout. Manufacturer: SOLA / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30m 13mm Frame Tape Measure White Rust‑Resistant A‑Start - TECWERK
Taking advantage of a compact 30 m measuring length, a robust 13 mm tape and rust‑proof construction ensure reliable distance measurement on site; order the frame tape measure directly via Metav Werkzeuge or ask our consultants if needed. Frame tape measure 30 m (13 mm) — TECWERK frame tape, centimetre graduations, rust‑proof The Frame tape measure 30 m (13 mm) is a durable measuring reel designed for construction and workshop use, offering clear centimetre graduations and a corrosion‑resistant finish for long‑term field reliability. Length 30 m tape for long runs 13 mm durable tape for improved stability Centimetre graduations for straightforward reading Rust‑proof design for outdoor and damp environments Precise long‑range measurement for site and workshop The reinforced 30 m measuring length provides an efficient solution for longer distance checks without repeatedly repositioning the tape reel. With clear centimetre graduations, the reel supports quick, verifiable readings that reduce measuring errors on façades, floors and large components. The combination of a narrow, yet stable, tape width and legible metric marks optimises workflow speed and accuracy for common trades and maintenance tasks. Stable handling and resilient construction reduce downtime A 13 mm tape width delivers improved rigidity during extension, which keeps the measuring line straighter and easier to manage over long distances. The housing specified as white plastic with rust‑proof properties protects internal components from moisture and soiling, extending service intervals. These construction choices mean fewer interruptions for maintenance and a lower likelihood of measurement repeat work, supporting uninterrupted project schedules. Clear application guidance and practical advantages on every job As a compact measuring reel, this implement suits on‑site contractors, surveyors and workshop technicians who require a dependable, easy‑to‑read distance tool. The start of measure at position A simplifies alignment with fixtures and edges, while the light but sturdy casing promotes portability between vans and toolboxes. Confidence in measurement reliability contributes to smoother handovers and fewer adjustments during installation or fabrication. Contact Metav Werkzeuge in Emmerich for personalised advice or ordering of TECWERK measuring reels — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific applications or to arrange delivery from the Emmerich warehouse. Technical data Article number: 2000855413NW Name: Rahmenbandmaß 30m 13mm Acm EG II Ku.weiß rostfr.TECWERK Product type: Rahmenbandmaß Manufacturer: TECWERK Facts Length: 30 m Tape width: 13 mm Graduation: cm Packaging unit: 1 Special features Rust‑proof White plastic housing Measure start: A SKU: 2000855413NW FAQ What length is the tape and what graduations are used? The tape measures 30 m in length and is graduated in centimetres, allowing straightforward metric readings for longer runs. Is the tape suitable for outdoor use and humid environments? Yes, the reel is specified as rust‑proof, which helps protect metal components and extends usability in damp or outdoor conditions. How does the 13 mm tape width affect handling? A 13 mm width increases tape rigidity during extension, improving line stability and ease of measurement over long distances. What does the measure start "A" indicate? The measure start marked as A denotes the tape’s zero‑point configuration for accurate edge alignment when measuring from fixed points. Can this reel be used by tradespeople as a daily workshop tool? The design and features make the reel suitable for regular use by contractors, surveyors and workshop technicians who require dependable long‑range measurement. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
30m Bandmaß Rahmenbandmaß Ergoline Bandbreite 13mm Glasfaserband Maßanfang A - Bayerische Maß-Industrie Arno Keller GmbH
Rahmenbandmaß ERGOLINE L.30m Band-B.13mm Acm EG II Alu.gelb Glasfaser BMI – Bandanfang Kapselbandmaß Rahmenbandmaß ERGOLINE L.30m Band-B.13mm Acm EG II Alu.gelb Glasfaser BMI eignet sich für präzise Langstreckenmessungen in Werkstatt und Baustelle und kombiniert ein robustes Gehäuse mit einem dehnungsarmen Glasfaserband 30 m Messlänge für lange Strecken Bandbreite 13 mm für gute Führung Glasfaserband mit cm-Teilung, dehnungsarm Aluminiumgehäuse in Gelb, stoßfest Maßanfang A für exakte Außenmaße Präzise Messungen über lange Distanzen sichern schnellen Arbeitsfluss Das 30 m lange Glasfaserband ermöglicht zuverlässige Messungen dort, wo kurze Messwerkzeuge an ihre Grenzen stoßen. Durch die cm-Teilung lässt sich schnell ablesen, ohne zusätzliches Umrechnen. Die kompakte Bauform als Kapselbandmaß schützt das Band beim Transport und reduziert Ausfallzeiten durch Beschädigung. Für Betriebe, die wiederkehrend lange Strecken abmessen, bedeutet das messbare Zeitersparnis und weniger Materialverschnitt. Robustheit und Handling für den rauen Alltag Das Aluminiumgehäuse in Gelb macht das Werkzeug gut sichtbar auf der Baustelle und schützt das Innenleben vor Stößen. Das Glasfaserband ist weniger anfällig für Korrosion als Stahlbänder und bleibt bei wechselnden Temperaturbedingungen formstabil. Die Bandbreite 13 mm sorgt für eine stabile Bandführung, wodurch das Ablesen auch bei leichtem Durchhängen einfach bleibt. Durch die Bauweise ist das Maß langlebig und wartungsarm. Geeignet für Handwerk, Montage und Baustelle Die Ausführung als Bandanfang Kapselbandmaß mit Maßanfang A ist speziell auf Anwendungen ausgelegt, bei denen Außenmaße und schnelle Längenmessungen im Vordergrund stehen. Installateure, Schreiner und Montagekolonnen profitieren von der Kombination aus Reichweite und Übersichtlichkeit der Skala. Die klare Kennzeichnung und die robuste Hülle reduzieren Suchzeiten und schützen die Investition. Einfache Integration in Betriebsabläufe und Anwenderfreundlichkeit Die klare Beschriftung und das handliche Format erleichtern die Einarbeitung neuer Mitarbeiter und standardisieren Messvorgänge im Betrieb. Durch die dehnungsarme Materialwahl bleibt die Messgenauigkeit über viele Einsätze erhalten, was die Planungssicherheit für Zuschnitt und Montage erhöht. Die einfache Handhabung senkt Fehlerquoten und stärkt die Effizienz bei wiederkehrenden Messaufgaben. Empfehlen Sie das gelbe Aluminium-Rahmenbandmaß für präzise und langlebige Feldmessungen und setzen Sie auf die Expertise von Metav Werkzeuge GmbH – Für Beratung und Bestellung erreichen Sie uns per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 4000855863NW Bezeichnung: Rahmenbandmaß ERGOLINE L.30m Band-B.13mm Acm EG II Alu.gelb Glasfaser BMI Produktart: Bandanfang Kapselbandmaß Hersteller: Bayerische Maß-Industrie Arno Keller GmbH Verpackungseinheit: 1 Fakten Länge: 30 m Bandbreite: 13 mm Teilung: cm Besonderheiten Gehäusematerial: Aluminium Farbe: Gelb Bandmaterial: Glasfaser Maßanfang: A FAQ Ist das Band für Außeneinsätze auf Baustellen geeignet? Das Glasfaserband des Rahmenbandmaßes ist korrosionsresistent und das Aluminiumgehäuse bietet Schutz gegen Stöße, sodass das Gerät für den Baustellenbetrieb gut geeignet ist. Wie genau kann mit dem Maß gemessen werden? Dank der cm-Teilung und dem Maßanfang A lassen sich Außenmaße präzise abnehmen; die Materialwahl reduziert Dehnung und erhält die Messgenauigkeit über viele Einsätze. Für welche Anwendergruppen ist das Bandmaß konzipiert? Das Bandmaß richtet sich an Handwerk, Montage und Bau, insbesondere an Anwender, die häufig längere Strecken messen müssen. Gibt es Besonderheiten bei der Handhabung des Kapselbandmaßes? Die Kapselbauweise schützt das Band beim Transport und sorgt für ein kompaktes Handling, wodurch die Einsatzbereitschaft erhöht wird. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30m Capsule Tape Measure 13mm Blade 2 mm/cm Measurement Start A - TECWERK
Combining long reach and clear graduations with a robust housing makes for efficient, reliable measuring on site and in the workshop; the 30 m reach and 2 mm/cm scale speed up layout while the ABS casing and nylon‑fibre tape ensure long service life. Order the TECWERK cased tape measure directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Cased Tape Measure L 30 m — 13 mm tape, 2 mm/cm graduation TECWERK Cased Tape Measure L 30 m is a compact, durable measuring reel for construction and workshop tasks, featuring a clear 2 mm/cm scale and a corrosion‑resistant 13 mm tape for fast, repeatable measurements. Robust ABS housing 30 m measuring length 13 mm corrosion‑resistant tape 2 mm/cm high‑precision scale Accurate, repeatable measurements to speed up workflows The measuring reel delivers precise readings across long spans thanks to its 30 m tape and fine 2 mm/cm graduation, which provide consistent reference points for layout and installation work. The dense graduation means marks appear every 2 mm within each centimetre, facilitating intermediate measurements without constant interpolation; this reduces rework and saves time on repetitive tasks. The compact reel keeps the tape taut for straighter pulls, so measurements stay reliable over longer distances — a practical advantage for site surveyors and workshop technicians who require both reach and repeatability. Built to withstand daily workshop and site use A hard ABS housing protects the mechanism from impacts and abrasion, while the tape itself combines a nylon‑fibre surface with corrosion‑resistant treatment for improved longevity in mixed environments. These construction choices translate into fewer replacements and lower lifecycle cost for tool fleets. The design also supports smooth rewinding and secure locking, which minimises handling time and helps maintain measurement accuracy under demanding conditions. The combination of robust materials and simple mechanics means the reel remains serviceable with minimal upkeep. Clear scale and tape geometry that reduce reading errors The 13 mm tape width increases legibility at typical working distances, so marks and numbers are easier to read under poor light or when held at an angle. The marked 2 mm/cm division offers finer granularity than standard centimetre‑only tapes, enabling quicker estimation of fractional centimetres without secondary tools. The tape start is identified as Addition A, specifying the designed measuring reference at the tape end; this ensures consistent zeroing and straightforward alignment when measuring to edges or into profiles. These features combine to reduce mistakes during layout and improve first‑time accuracy for installations. Designed for trades, workshops and mobile teams This compact measuring reel is suited to electricians, carpenters, site engineers and general workshop use where extended reach and durability matter. The sturdy construction and legible scale support rapid measurement cycles, while the portable form factor allows easy storage in a tool bag or vehicle. For procurement and inventory planning, the item comes packaged as a single unit and is ready for immediate deployment in fit‑out, maintenance and production environments. Metav’s approach to precision tools emphasises dependable quality and consistent supply, making this tape a pragmatic addition to an organised toolkit. For reliable long‑reach measuring from a trusted supplier, consult Metav Werkzeuge to secure the TECWERK cased tape measure (SKU 2000855806NW) — expert advice and dispatch from Emmerich are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000855806NW UID: 2000855806NW Product type: Cased tape measure Facts Length: 30 m Tape width: 13 mm Graduation: 2 mm/cm Packaging unit: 1 Special features Casing material: ABS Tape material: Nylon‑fibre Accuracy class: EG II Tape start: Addition A (measure start) FAQ Is the tape suitable for outdoor construction measurements? The TECWERK cased tape measure is designed for site use; its ABS housing and nylon‑fibre tape provide enhanced resistance to moisture and mechanical wear for typical outdoor conditions. How fine is the scale and how does it help with accuracy? The tape shows a 2 mm/cm division, meaning marks every 2 mm within each centimetre; this fine graduation supports quicker intermediate readings and improved accuracy on layout tasks. What does the tape start "Addition A" mean? Addition A identifies the tape end reference intended for direct edge measurements; it clarifies the zero point so measurements are consistent when measuring from the tape tip. Will the tape remain legible after extended use? The tape’s nylon‑fibre coating and corrosion‑resistant treatment enhance number and mark durability, helping maintain legibility during prolonged field use. Which professionals benefit most from this reel? Tradespeople who require extended reach and repeatable readings — such as carpenters, electricians and site engineers — will value the combination of 30 m reach, robust casing and fine graduation. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
30m Frame Measuring Tape 13mm Width A-Start Metric - TECWERK
Reliable 30 m measuring capacity combined with a 13 mm tape width and clear centimetre graduations ensures fast, repeatable distance checks on site and in the workshop. Order the TECWERK frame reel measuring tape directly via Metav Werkzeuge or contact our consultants for specification support. TECWERK open-frame tape measure 30 m – 13 mm blade A robust TECWERK open-frame tape measure for straightforward distance measurement in construction, surveying and workshop environments, featuring a centimetre scale and a durable white casing. 30 m measuring length 13 mm tape width Centimetre graduations White open-frame casing Faster, more reliable distance measurement on the job The 30 m blade with centimetre scale provides a clear, continuous reference for mid- to long-range measurement tasks, reducing the need for repeated short measures and calculations. The centimetre graduation allows direct reading without conversion, which accelerates layout and inspection workflows and minimises transposition errors. By choosing a compact open-frame reel, teams benefit from a device that supports quick rewinds and steady blade control, enhancing productivity during repetitive measuring tasks. Durable open-frame design that tolerates daily site use An open-frame construction offers easy handling and uncomplicated maintenance compared with enclosed reels. The relatively slim 13 mm tape width balances blade stiffness for straight pulls with the flexibility needed for coiling, which reduces kinking and blade fatigue over time. The white casing indicates a resilient plastic housing that protects the reel mechanism while keeping the tool lightweight for handheld use. This combination of design features helps to lower downtime and service needs in routine field operations. Practical features to reduce measurement errors and speed up tasks A defined measuring start (Measuring start: A) and the clear scale division in centimetres simplify setup for both single measurements and iterative checks. The simple packaging as a single unit supports easy inventory management and immediate deployment at the bench or on site. For procurement and traceability, the item is listed under SKU 2000855410NW, enabling quick reference in stock systems and order forms. The result is a pragmatic measuring tool that supports efficient, error‑reduced workflows in everyday industrial use. Contact Metav Werkzeuge today for expert advice on integrating TECWERK measuring tools into the workshop and for delivery from our Emmerich site – phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: 2000855410NW Brand: TECWERK Product type: Open-frame tape measure Measurements Length: 30 m Tape width: 13 mm Graduation: cm Design / Special features White plastic casing Measuring start: A Packaging unit: 1 FAQ What is the maximum measuring length of this tape? The tape measures up to 30 m in a single run, making the TECWERK open-frame tape measure suitable for medium- to long-range distance checks. Which scale is printed on the blade? The blade features a clear centimetre scale for direct reading in centimetres, which simplifies many layout and verification tasks. Is the tape suitable for use on construction sites? Yes, the open-frame construction and resilient white casing make the tape robust enough for frequent on‑site use while remaining easy to handle. How stiff is the blade and how does that help? The 13 mm blade width provides a balance between stiffness for straight pulls and flexibility for coiling, helping to reduce kinks and maintain readable graduations. How can the product be ordered or referenced? Orders and inventory checks can reference SKU 2000855410NW when adding the TECWERK open-frame tape measure to procurement lists. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
30m Frame Tape Measure Ergoline 13mm Band, Metric (mm/cm) - BMI
Take advantage of a robust measuring solution that combines long reach, clear metric graduations and a compact 13 mm band for stable handling; the result is reliable linear measurement for trade and workshop tasks. Order the ERGOLINE frame tape measure directly via Metav Werkzeuge or consult our specialists for specification support. ERGOLINE frame tape measure — 30 m, 13 mm band, mm/cm graduations The ERGOLINE frame tape measure is a durable open-reel measuring tool designed for straightforward linear measurement applications, offering a 30 m length and mm/cm graduations for clear, metric readings. 30 m measuring length 13 mm wide measuring band mm/cm graduations for fine reading Measure start labelled B Precision where long-range measurements remain clear and fast The open-reel design delivers 30 m of measuring capability while the narrow, 13 mm band balances visibility and handling. This combination reduces the need for repeated measurements on long distances and supports consistent results across successive readings. The metric mm/cm graduations are arranged to allow rapid interpretation of values on the band; this is particularly useful where incremental measurements must be transferred to plans or recorded. The marked measure start B provides a defined reference point, helping to avoid ambiguity when establishing baseline offsets or when multiple technicians must reproduce the same zero point. Practical design for reliable everyday use on the job An open-frame tape measure with a slim band provides quick deployment and retraction while maintaining a compact footprint on a workbench or in a tool bag. The white band contrasts with the graduations for easy-to-read measurements under varied lighting conditions, which speeds up layout tasks and reduces operator fatigue when many measurements are required. The frame construction supports durability in routine workshop conditions and enables steady extension of the tape when measuring across uneven ground or through openings. Integrating the reel into workshop and site workflows The measuring reel's straightforward metric scale and fixed reference point simplify handover between colleagues and ensure recorded values remain consistent across job phases. As a practical measuring tool for trades, the tape can be used for general site layout, checks of installed components and any linear measurement where a 30 m reach is sufficient. For additional specification queries or if confirmation is needed that this reel matches a particular measuring process, technical advice is available to align the tool with operational requirements. Contact Metav Werkzeuge today to secure the ERGOLINE frame tape measure from BMI — Metav Werkzeuge's consultants will advise on suitability for specific applications and provide ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000855431NW Type: ERGOLINE Brand: BMI Product type: Frame tape measure Packaging unit: 1 Facts Measuring length: 30 m Band width: 13 mm Graduation: mm/cm Special features Colour: white Measure start: B Frame tape measure design Marked metric scale FAQ What is the measuring length of the reel? The measuring reel provides a measuring length of 30 m, suitable for many site and workshop linear measurement tasks. What scale is printed on the band? The band is printed in mm/cm graduations to allow precise metric readings for fine and coarse measurements. How wide is the measuring band and why does that matter? The band width is 13 mm, offering a balance between visibility of the scale and ease of handling during long extensions. What does the measure start labelled B mean? The marking B indicates the defined starting reference on the tape band, which helps establish a consistent zero point for repeated measurements. Is the reel intended for professional trades and workshop use? Yes, the design and metric graduations make the measuring reel appropriate for trade and workshop applications requiring straightforward linear measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30m Precision Tape Measure Frame, 13mm Fibreglass Blade, Centimetre Graduation, Aluminium Yellow Case - Bayerische Maß-Industrie Arno Keller GmbH
Combine the 30 m measuring range with a robust 13 mm glass-fibre tape and an aluminium, high-visibility frame for dependable site measurements; order via Metav Werkzeuge or contact their advisors for technical clarification. ERGOLINE L 30 m frame tape measure — 13 mm glass-fibre tape, aluminium yellow frame (Bayerische Maß‑Industrie) The ERGOLINE L 30 m frame tape measure provides long-range, centimetre-graded measurement for workshop and on-site tasks, designed as a tape with a capped tape end for reliable start measurements 30 m measuring length 13 mm glass-fibre tape Aluminium yellow frame Band start B capped end Precise long-range measurement that stays true over distance The 30 m length and 13 mm tape width deliver consistent readings over extended runs, while the glass-fibre construction reduces elongation compared with conventional materials. The centimetre graduation ensures straightforward reading for general workshop and site applications; the tape is engineered to remain accurate even after repeated extraction and retraction. Measured results are therefore more predictable, which optimises workflow and reduces the need for repeated checks. Clear markings and ergonomic frame for faster work A high-visibility aluminium frame with a compact profile protects the tape during handling and transport, while the capped tape end indicated as band start B secures the measuring start point for flush or hooked measurements. The centimetre graduations are printed for quick interpretation at a glance; the tape width supports stable placement on material edges, improving contact and minimising bending. These design choices together speed up common measuring tasks and lower handling errors. Durable construction for professional use and low upkeep The fibre-based tape resists moisture and most workshop conditions, offering a durable, low-maintenance alternative to metal tapes in situations where corrosion or electrical conductivity is a concern. Built for frequent use, the frame and capped end provide robust protection and reliable tape guidance over the long term. Supplied as a single unit, the tool fits the needs of tradespeople who require a resilient measuring instrument for repetitive, everyday measuring tasks. For product availability, technical details or to request a quotation for the ERGOLINE L 30 m frame tape measure, contact Metav Werkzeuge GmbH in Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 — Metav supplies reliable stock and expert advice for workshop measurement tools Technical data SKU: 4000855865NW Label: Rahmenbandmaß ERGOLINE L.30m Band-B.13mm Bcm EG II Alu.gelb Glasfaser BMI Manufacturer: Bayerische Maß-Industrie Arno Keller GmbH Product type: Bandanfang Kapselbandmaß UID: 4000855865NW Facts Length: 30 m Tape width: 13 mm Graduation: centimetre Packaging unit: 1 Materials / Special features Glass-fibre tape Aluminium yellow frame Band start: B (capped tape end) Ergoline series FAQ What is the usable measuring length of this tape measure? The ERGOLINE L 30 m frame tape measure provides a usable measuring length of 30 m as specified on the label. How wide is the tape and what does that mean for stability? With a tape width of 13 mm, the fibre tape offers improved stability on edges and reduced bending, aiding clearer centimetre readings. What does 'band start B' indicate? Band start B denotes a capped tape end designed to secure the measurement start point; this feature on the ERGOLINE L ensures a reliable reference for flush and hooked measurements. Is the tape suitable for damp or outdoor conditions? The glass-fibre construction increases resistance to moisture compared with some metal tapes, making the frame tape suitable for many outdoor and workshop conditions. Who manufactures this tape measure and who supplies it? The tape is produced by Bayerische Maß-Industrie Arno Keller GmbH and is supplied via Metav Werkzeuge GmbH for European distribution. Manufacturer: Bayerische Maß-Industrie Arno Keller GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30m Radius Capsule Tape Measure 13mm Fibreglass Blade Yellow A Start - BMI
Take advantage of a long-range, low-stretch fibreglass tape and a slim 13 mm profile for steady handling and clear centimetre graduations; the encapsulated case and yellow plastic coating increase visibility and protection on site. Order directly via Metav Werkzeuge or contact our consultants for application advice. RADIUS Encapsulated Tape Measure — 30 m, 13 mm fibreglass tape (BMI) The RADIUS Encapsulated Tape Measure is a compact, robust measuring solution for workshop, site and inspection tasks, designed as an encapsulated tape measure for everyday professional use 30 m fibreglass tape for long measurements 13 mm tape width for stable handling Yellow plastic coating for high visibility Encapsulated steel case for impact protection Long-range accuracy with a flexible fibreglass tape The combination of a 30 m measuring range and a fibreglass construction delivers a low-stretch tape that is well suited to extended measuring tasks on building sites and in large workshop areas. Fibreglass tape material remains dimensionally stable under normal temperature and humidity conditions, which reduces re-measurement and speeds up workflows; the scale is graduated in cm for clear, comparable readings. The entry-level marking identified as an A-type start (measure start A) ensures that the zero point is clearly defined for repeatable measurements. Together, these characteristics offer a reliable balance between reach and repeatable precision, supporting efficient, error-reducing measurement routines. Stable handling and clear graduations for precise results A 13 mm tape width provides resilience against flutter during long pulls and improves tactile stability in hand, which helps to avoid parallax errors when reading the graduations. The printed scale uses centimetre divisions that are easy to read at a glance, aiding quick decision-making on the job. A slimmer tape profile also allows smoother retraction into the encapsulated housing while maintaining a flat measuring surface on contact with the measured object. These design choices translate into fewer interruptions and faster measurement cycles in routine workshop tasks and installation work. Robust casing and high visibility for demanding environments The encapsulated case is engineered to protect the tape from dirt and impact, while the yellow plastic coating on the tape enhances visibility in low-light or cluttered environments. The housing resists everyday knocks and minimises ingress of contaminants, extending service life and reducing downtime due to equipment replacement. The visible colour coding and protective case together reduce handling errors and make the tool easy to find on busy sites, supporting continuous operation and fewer delays during peak workloads. Practical use and procurement confidence This encapsulated measuring tool integrates straightforward functionality with workshop-grade durability, making it suitable for tradespeople, site engineers and workshop supervisors who require a dependable long-range tape. The slim, protected tape delivers immediate practical benefits: stable measurements, clear cm graduations and a durable finish for harsh conditions. Metav stands for democratising precision and offers experienced procurement support from Emmerich; for further technical clarification about fit or specific applications, additional data and advice are available via the contact channels below Contact Metav Werkzeuge today to discuss how the RADIUS encapsulated tape measure fits project requirements and to request ordering or technical advice directly from Metav Werkzeuge in Emmerich Technical Data Article number: 4000855740NW SKU / UID: 4000855740NW Manufacturer: BMI Product type: Kapselbandmaß (encapsulated tape measure) Label: Kapselbandmaß RADIUS L.30m Band-B.13mm Acm EG II Ku.gelb Glasfaser BMI Facts Length: 30 m Tape division: cm Tape width: 13 mm Packaging unit: 1 Special features Fibreglass tape Yellow plastic coating Encapsulated case A-type measure start (Maßanfang: A) FAQ Is the tape suitable for outdoor use? The RADIUS encapsulated tape measure from BMI is designed with a fibreglass tape and a yellow plastic coating, which improves visibility and resistance to typical outdoor conditions during standard use. How precise are the graduations on the tape? Graduations are given in centimetres; the tape’s fibreglass composition and A-type measure start ensure repeatable readings suitable for general workshop and site tasks. What is the tape width and why does it matter? The tape width is 13 mm, a dimension that delivers improved stability during long pulls and helps prevent flutter, supporting more consistent measurements. Does the housing protect the tape from jobsite impacts? Yes, the encapsulated case is designed to minimise dirt ingress and mitigate everyday impacts, helping to prolong the serviceable life of the measuring tape. Which SKU identifies this model for ordering? This specific model is listed under SKU 4000855740NW for clear identification during procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30m Rahmenbandmaß Bandbreite 13mm Teilung mm/cm Maßanfang A, Aluminium Gelb Stahlband - BMI
Rahmenbandmaß ERGOLINE – Rahmenbandmaß Das Rahmenbandmaß ERGOLINE ist ein robustes 30‑Meter‑Maßband mit mm/cm‑Teilung, ausgelegt für präzise Längenmessungen im Bau‑ und Handwerksalltag. Rahmenbandmaß »ERGOLINE« von BMI 30 m Messband mit mm/cm-Teilung Bandbreite 13 mm für hohe Stabilität Maßanfang A für exakte Messungen Aluminiumgehäuse in gelber Ausführung Robuste Bauweise reduziert Messfehler Das ERGOLINE Rahmenbandmaß kombiniert ein stabiles Aluminiumgehäuse mit einem widerstandsfähigen Stahlmaßband. Die Bandbreite von 13 mm sorgt für geringere Verwindung und ein ruhigeres Ausziehen über lange Strecken, sodass Messfehler durch Durchhängen minimiert werden. Für Anwender bedeutet das schnellere Arbeitsabläufe und weniger Nachmessungen bei Baustellen‑ und Montagearbeiten. Klare Ablesbarkeit und nachvollziehbare Teilung Die mm/cm‑Teilung ermöglicht sowohl feine als auch grobe Längenablesungen ohne Umrechnung. Der Maßanfang A erlaubt den direkten Maßbeginn am Bandende, wodurch Außenmaße ohne zusätzliche Korrekturen ermittelt werden können. Diese Eigenschaften reduzieren Umrechnungsfehler und beschleunigen das Vermessen von Flächen, Längen und Objekten im täglichen Einsatz. Für Profis auf Baustellen und in Werkstätten konzipiert Das Stahlmaßband eignet sich besonders für Nutzer aus Bau, Ausbau, Zimmerei und Haustechnik, die lange Strecken schnell und zuverlässig aufnehmen müssen. Durch die Kombination aus Länge, Teilung und robuster Konstruktion richtet sich das Maßband an Fachkräfte, die wiederholte Präzisionsmessungen benötigen und Wert auf Langlebigkeit legen. Wartungskomfort und Nutzungsdauer Das Gehäuse lässt sich leicht reinigen und schützt das Band vor mechanischer Beschädigung. Durch die gelbe Gehäusefarbe bleibt das Maßband auf Baustellen gut sichtbar. Die kompakte Bauform und die Verpackungseinheit 1 erleichtern Lagerung und Bereitstellung im Werkzeugkasten, wodurch Betriebskosten durch häufige Ersatzbeschaffungen gesenkt werden. Sichern Sie sich das ERGOLINE Rahmenbandmaß von BMI für dauerhaft präzise Messungen – erhältlich direkt über Metav Werkzeuge, per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 4000855857NW Marke: BMI Typ: ERGOLINE Produktart: Rahmenbandmaß Bezeichnung: Rahmenbandmaß ERGOLINE L.30m Band-B.13mm A mm/cm EG II Alu.gelb Stahlmaßband BMI Verpackungseinheit: 1 Fakten Länge: 30.000 mm Teilung: mm/cm Bandbreite: 13 mm Besonderheiten Maßanfang: A (Maßbeginn am Bandende) Gehäusefarbe: Aluminium / Gelb Materialhinweis: Stahlmaßband EG II (Einsatzklasse) FAQ Wie lang ist das Band des ERGOLINE Rahmenbandmaßes? Das ERGOLINE Rahmenbandmaß verfügt über ein Band mit einer Länge von 30 Metern; in der Artikelangabe als SKU 4000855857NW dokumentiert. Was bedeutet Maßanfang A beim Rahmenbandmaß? Maßanfang A beim Rahmenbandmaß ERGOLINE von BMI beschreibt den Maßbeginn am Bandende, sodass Außenmaße ohne zusätzlichen Korrekturfaktor direkt abgelesen werden können. Für welche Anwendungen ist das ERGOLINE Rahmenbandmaß geeignet? Das ERGOLINE Rahmenbandmaß ist konzipiert für Bau‑ und Handwerksarbeiten, Innenausbau und Vermessungsaufgaben, bei denen lange Strecken schnell und präzise aufgenommen werden müssen. Wie widerstandsfähig ist das Bandmaterial? Das Band ist als Stahlmaßband ausgeführt und für den rauen Einsatz auf Baustellen und in Werkstätten konstruiert, wodurch es mechanischer Beanspruchung länger standhält. Ist das Maßband gut sichtbar auf der Baustelle? Ja, das Aluminiumgehäuse in gelber Ausführung sorgt für gute Sichtbarkeit und erleichtert die Auffindbarkeit auf der Baustelle. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30m Tape Measure 13mm Width Aluminium White Frame Start A - TECWERK
Take advantage of a sturdy aluminium frame combined with a 30 m steel tape and centimetre graduation for reliable, long-range measurements on site; the clear 13 mm tape and marked measuring start A support fast, repeatable workflows. Order directly via Metav Werkzeuge or contact our consultants for specification advice. TECWERK frame tape measure — 30 m, 13 mm steel tape TECWERK frame tape measure for long-range site and workshop measuring with clear centimetre division for fast read-off Durable aluminium frame, white finish 30 m steel tape with 13 mm width Centimetre graduation for precise reading Start position A for exact measurements Reliable long-range measurement for site and workshop efficiency The robust 30 m steel tape provides a long measuring range while the 13 mm width keeps the blade sufficiently stiff for straight runs over distance. Centimetre division ensures rapid, precise reading for building layout, fencing, utilities or landscape work; the clear scale reduces reading errors and speeds up repetitive tasks. The measuring start A is marked for unambiguous reference on each measurement, which simplifies transfer of on-site dimensions into drawings or reports. This combination of length and readable graduation supports productivity by limiting re-measurement and rework. Tough construction for daily professional use Housed in an aluminium frame with a white finish, the device is built for frequent handling and transport between job sites. The steel tape resists kinking and maintains straightness on extended pulls, while the moderate blade width balances rigidity and compact rewind. The design is aimed at trades and survey crews who require a dependable tool that withstands everyday use without compromising legibility. Clear markings and a compact frame reduce handling time and contribute to consistent measurement quality across teams and jobs. Faster workflows with fewer uncertainties Fast, reliable measurements lead to tangible time savings and smoother project progress: fewer interruptions for rechecking, firmer confidence when transferring dimensions, and quicker handovers between colleagues. As a supplier focused on accessible precision, Metav Werkzeuge combines practical tool selection with support for correct tool choice; if additional technical data is required or there is uncertainty whether this tape meets specific job needs, technical advice is available by email or telephone. The tape is presented as a pragmatic solution for professionals who value repeatable accuracy and robust, low-maintenance equipment. Contact Metav Werkzeuge for tailored advice and assured delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 2000855420NW Product type: Frame tape measure Brand: TECWERK Packaging unit: 1 Measurements Length: 30 m Graduation: centimetre Tape width: 13 mm Features Steel measuring tape Aluminium frame, white finish Measuring start: A Label: Rahmenbandmaß L.30m Bandbr.13mm Acm EG II Alu.weiß Stahlmaßband TECWERK FAQ What is the tape length and blade width? The tape provides a 30 m range with a 13 mm blade width for improved stiffness during extended pulls. Which graduation is printed on the tape? The tape features a centimetre graduation for clear and fast read-off suitable for building and installation work. Is the start of measurement marked? Yes — the product shows a measuring start marked as A to provide a consistent reference point during measuring tasks. Which materials are used for frame and blade? The instrument combines an aluminium frame with a steel measuring tape to balance light weight with blade durability. What is the product reference for ordering? Order using SKU 2000855420NW; the item is listed as a TECWERK frame tape measure, 30 m, 13 mm blade. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
30m Tape Measure LBM 2000 Fibreglass 13mm Band, cm Graduation, Start at B - STABILA
Reliable fibreglass construction and clear centimetre graduations deliver accurate, low-maintenance site measurement; the compact capsule housing protects the reel in tough conditions and ensures rapid measuring cycles. Order the LBM 2000 Fibreglass directly via Metav Werkzeuge or consult our specialists for selection advice. LBM 2000 Fibreglass — Fibreglass measuring tape reel, 30 m, 13 mm tape width (STABILA) The LBM 2000 Fibreglass is a compact fibreglass measuring tape reel designed for metric measurement tasks on construction sites, landscaping and general workshop use. Fibreglass tape for weather resistance and low stretch Clear centimetre graduations for fast reading Compact capsule housing for robust protection Precise metric measurement where it matters The fibreglass tape combines dimensional stability with a flexible feel, making it suited to extended runs on building sites and outdoor environments. At a length of 30 m length and with centimetre graduations, the reel enables continuous, metric measurement without the need for repeated joins; this reduces cumulative error and speeds up surveying tasks. The 13 mm tape width provides sufficient stiffness for single-person sighting over several metres, while the printed scale remains legible under routine jobsite stress. For professionals requiring repeatable distance data, these specifications translate into fewer re-measures and more reliable results. Built for everyday jobsite durability The measuring reel is housed in a compact capsule that shields the tape from impacts and dust, prolonging service life and reducing downtime for replacements. The fibreglass material resists moisture and is less prone to stretching than textile tapes, which means the calibrated scale maintains accuracy class EG III for longer. Sturdy construction and weather-resistant properties support efficient workflows in unpredictable conditions, so maintenance intervals are extended and operational costs are lowered through fewer tool failures. Efficient handling and practical features for faster work A narrow yet stable tape profile improves reach and reduces sag on long measurements, supporting single-operator efficiency in trenching, landscaping and site layout. The reel includes the marked measure start (start: B) for clarity when performing additive or subtractive measurements; this labelling aids in recording offsets and ensures consistent data capture across teams. The compact form factor fits into a tool belt or site box without occupying excessive space, enabling quick deployment and less clutter on the workbench. Professional fit: why workshops and sites choose this solution This tape reel is aimed at tradespeople, site surveyors and workshop teams who value dependable, easy-to-read metric measuring aids. By combining a robust fibreglass blade, clear centimetre marking and a protective capsule, the unit supports precise layout and verification tasks across building, landscaping and maintenance operations. Backed by a distributor that focuses on accessible, high-precision tools, the product helps standardise measurement practice and limits variability between operators. Contact Metav Werkzeuge for supply from Emmerich or specialist advice on the STABILA LBM 2000 Fibreglass measuring tape reel (SKU 8000911845NW) at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 8000911845NW Brand: STABILA Model: LBM 2000 FIBREGLASS Product type: Measuring tape reel Facts Length: 30 m Tape width: 13 mm Graduation: centimetres Packaging unit: 1 Special features Fibreglass tape Compact capsule housing Measure start: B Accuracy class: EG III FAQ What is the tape length and width? The LBM 2000 Fibreglass features a 30 m fibreglass tape with a 13 mm blade width (SKU 8000911845NW). Is the scale metric or imperial? The tape is graduated in centimetres for metric measurement; the design supports fast metric recording on site. Can the tape be used outdoors in wet conditions? The fibreglass blade is resistant to moisture and the capsule housing protects the reel, so the unit is suitable for outdoor use under normal site conditions. What does the measure start 'B' indicate? The marked start (start: B) denotes the tape’s designated measuring origin for additive or subtractive measurements and assists with consistent offset work. Who typically uses this type of measuring reel? Tradespeople, site surveyors and workshop technicians use this reel where reliable, long-range metric measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30m Tape Measure LBM 2000 Steel 13mm Blade Metric Start B, PC-ABS/TPE Casing - STABILA
Take advantage of the robust 30 m steel tape and the compact PC‑ABS/TPE capsule housing to achieve reliable site measurements with minimal downtime; the 13 mm blade width and measuring start B ensure clear graduations and long reach. Order the tape measure directly via Metav Werkzeuge or consult our specialists for application advice. LBM 2000 STEEL — STABILA capsule tape measure, 30 m steel tape The LBM 2000 STEEL is a durable capsule tape measure designed for construction and general site measuring, combining a long 30 m reach with a rigid 13 mm steel blade and a shock‑resistant PC‑ABS/TPE case. 30 m stainless steel tape, 13 mm wide Robust PC‑ABS/TPE capsule housing Measuring start: B for precise zero point Class EG II accuracy for site work Clear graduations and a long reach that speed up measuring The long 30 m blade with mm graduation and a 13 mm profile offers a dependable span for extended measurements without frequent repositioning of the ladder or staff, which shortens task time. The steel tape resists stretching and provides the straightness required for accurate single‑person measurements on façades and long components. The indicated measuring start: B defines the reference at the tape end so that the zero point behaviour is predictable and reproducible on both internal and external measurements, reducing alignment errors and rework. A housing built for harsh environments and everyday handling The capsule design with PC‑ABS/TPE construction delivers impact absorption and a secure grip during site use while maintaining compact storage. The casing materials combine toughness with tactile control, which minimises slips when handling the instrument under wet or dusty conditions. The result is a robust measuring tool that preserves blade condition and marking legibility for longer, reducing interruptions for replacements and sharpening the workshop’s operational reliability. Practical features that improve workflow and measurement reliability The 13 mm blade width balances flexibility and stiffness: it is wide enough to remain straight over distances yet narrow enough for controlled retraction and compact coiling inside the housing. Markings printed on a quality steel substrate remain legible under frequent use, enabling faster transfer of measured values to plans or digital records. With the EG II designation noted on the product label, the instrument aligns with expectations for site accuracy and repeatability in everyday installation and assembly tasks. Suitable applications and professional confidence As a capsule tape measure, the product is appropriate for trades that require dependable long‑range measurement such as carpentry, building services and on‑site installation checks. The combination of a steel tape, a resilient case and a clear zero reference supports consistent results across repeated cycles of work, demonstrating efficiency gains and fewer corrective measures. For purchasers seeking an everyday site instrument that upholds practical accuracy without unnecessary complexity, this measuring tape offers a well‑balanced specification. Contact Metav Werkzeuge for tailored advice on the STABILA LBM 2000 STEEL and to arrange supply from our Emmerich warehouse. Technical data SKU: 8000911847NW Type: LBM 2000 STEEL Description: Kapselbandmaß LBM 2000 STEEL L.30m Band‑B.13mm mm EG II PC‑ABS/TPE Stahlband Brand: STABILA Facts Length: 30 m Graduation: mm Tape width: 13 mm Packaging unit: 1 Special features Measuring start: B Housing: PC‑ABS/TPE Tape material: steel Accuracy class: EG II FAQ What is the declared length and tape width of this measuring tape? The tape provides a 30 m blade with a 13 mm width, allowing long‑range measurements while maintaining blade stiffness. Which material is the casing made from and why is that important? The casing is made from PC‑ABS/TPE, a combination that balances impact resistance and grip, which helps protect the blade and maintain handling comfort during site work. What does the marking "EG II" on the label indicate? The EG II designation refers to the instrument’s suitability for common site accuracy classes, confirming it is intended for practical construction and installation tasks where consistent results are required. How does the 'measuring start: B' affect measurement use? The measuring start: B indicates the reference position at the tape end, clarifying how internal and external measurements are derived and ensuring repeatable zero‑point behaviour. Is the tape suitable for long, single‑person measurements? Yes; the steel tape profile and the 13 mm width give sufficient rigidity for extended spans, facilitating longer single‑person measurements with reduced sag. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3m Pocket Tape Measure 16mm Steel Blade Metric Scale EG Class II, ABS/TPE Housing - STABILA
Take advantage of the 3 m measuring range combined with an easy-to-read metric mm scale and a robust ABS/TPE housing for dependable everyday use; order the instrument directly via Metav Werkzeuge or consult our advisors for application-specific guidance. STABILA BM 100 Pocket Retractable Tape Measure — 3 m, 16 mm blade, Class II The BM 100 is a compact pocket tape measure designed for precise metric measuring in workshops, on construction sites and for general maintenance tasks 3 m yellow-lacquered steel blade Automatic recoil with lock button ABS/TPE shock-resistant housing Integrated belt clip and lanyard eyelet Precision that supports reliable work on every job The compact tape delivers EG class II accuracy on a clear metric mm scale, ensuring measurements meet common trade tolerances. Class II indicates that the instrument has defined limits for permissible error according to European standards, which gives planners and machinists a verifiable basis for repeatable results. The 3 m range and 16 mm blade width balance portability and stability: the blade resists bending while extending, so single-person measurement tasks are quicker and less prone to error. This rational advantage reduces rework and saves time on repetitive measuring routines. Durable construction for frequent on-site handling A yellow-lacquered steel blade improves contrast and corrosion resistance, while the ABS/TPE housing offers impact protection and a secure grip in varied conditions. The built-in shock absorber and robust automatic recoil mechanism with a lock button protect the tape and control blade retraction for safer handling. Practical fittings such as the integrated nail eyelet in the hook, standard hook design and belt clip keep the tool accessible and reduce the chance of loss during a busy shift. These features together extend service life and lower total cost of ownership for workshop and site fleets. Designed for practical efficiency and regulatory compliance The one-sided metric scale is easy to read and the compact form factor keeps the tape measure unobtrusive in a pocket or tool pouch. Conformity marks such as CE, REACH and RoHS demonstrate adherence to current European chemical and safety directives, supporting procurement decisions where regulatory compliance matters. The tape’s modest net weight and slim dimensions make it a convenient everyday instrument for carpenters, electricians and general tradespeople who require a balance of accuracy, durability and straightforward operation. Choose the STABILA BM 100 for dependable metric measuring and contact Metav Werkzeuge for fast delivery and expert procurement advice from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 8000911834NW Type: BM 100 Product: Pocket retractable tape measure Brand: STABILA Max. measuring range: 3 m Facts Blade width: 16 mm Scale division: mm/mm Accuracy class: EG II Net weight: 0.14 kg Width: 3.50 cm Height: 6 cm Special features Yellow-lacquered steel blade Automatic recoil and lock button One-sided metric scale ABS / TPE housing Belt clip and lanyard eyelet Integrated nail eyelet in hook Shock absorber CE marked REACH- and RoHS conform FAQ Is the accuracy of this tape measure suitable for workshop layout? The BM 100 provides EG class II accuracy and a clear metric scale, making it suitable for typical workshop layout and installation tasks that do not require laboratory-level precision. Can the tape withstand everyday workshop conditions? Yes, the yellow-lacquered steel blade and ABS/TPE housing offer corrosion resistance and impact protection, so the tape measure performs well under normal workshop and site use. Does the tape have a locking mechanism for one-handed measuring? The instrument features an automatic recoil system with a lock button, allowing controlled retraction and one-handed measurement where needed. Is the hook suitable for hooking onto edges and nails? The tape includes a standard hook with an integrated nail eyelet, which permits secure anchoring to edges or nail heads during single-person measuring tasks. What makes this tape measure easy to carry during a shift? Compact dimensions, a lightweight design and an integrated belt clip keep the tape accessible and reduce handling time between measurements. Manufacturer: STABILA; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3m Pocket Tape Measure 16mm White Steel Band ABS Case EG Class II - Hultafors Group Germany GmbH
Take advantage of precise, repeatable measurements and a compact, workshop-ready design to speed up routine measuring tasks; the combination of automatic locking and a fold-out measuring tongue reduces re-measurement and saves time. Order directly via Metav Werkzeuge or contact our advisors for tailored technical guidance. Talmeter — Pocket retractable tape measure, 3 m / 16 mm, Hultafors Talmeter is a compact pocket retractable tape measure for reliable internal and external measuring in workshop and site environments. Automatic locking mechanism for secure readings Fold-out measuring tongue for easy internal measures White steel tape with mm/cm graduations Robust black ABS housing for workshop use Reliable accuracy for everyday workshop measuring The EC accuracy class II rating ensures that readings meet recognised tolerances for trade and workshop use, making the device suitable where consistent results are required. The white steel tape with clear mm/cm graduations provides high legibility on both short and extended runs up to 3 m, while the 16 mm tape width gives the blade enough stiffness to measure outward distances without sag. These attributes reduce rework and support efficient planning and production. Faster, safer readings through automatic locking An automatic locking mechanism secures the blade immediately when extended, preventing involuntary retraction and allowing hands-free marking or transfer of a measurement. The integrated scribing tip (anreiß‑spitze) enables precise transfer of dimensions onto timber or metal without the need for clamps, streamlining setup work. Together, these functions raise productivity by reducing interruptions during routine measuring tasks. Compact build designed for rough use on site The case is made from black ABS, selected for impact resistance and chemical tolerance typical in workshops. The compact profile fits a trouser or tool-belt pocket while the reinforced case geometry protects the mechanism when dropped. The construction balances low weight with durability, ensuring the tape remains serviceable across daily use in carpentry, locksmithing and general maintenance tasks. Practical features that reduce measuring time A fold-out measuring tongue simplifies internal measurements such as recess depths and window frames: it creates a reliable contact point so internal spans can be read without improvised workarounds. Marking and alignment are eased by the scribing tip and the pronounced blade markings. These pragmatic details are aimed at tradespeople and technicians who need dependable tools that limit measurement error and help projects stay on schedule. Discuss measurement needs with Metav Werkzeuge — our specialists can confirm whether this Hultafors pocket tape suits a particular application and advise on accessories and comparable items. Contact Metav Werkzeuge for fast, knowledgeable support. Technical data Article number: 4000855031NW Product type: Pocket retractable tape measure Label: Taschenrollbandmaß Talmeter L.3m B.16mm mm/cm EG II ABS Messlasche HULTAFORS Facts Tape length: 3 m Tape width: 16 mm Scale: mm/cm Accuracy: EC class II Special features Automatic locking mechanism Fold-out measuring tongue for internal measurements Scribing tip for transfer marking Housing material: black ABS Tape material: white steel Suitable for locksmiths and carpenters FAQ Is the tape suitable for internal measurements such as window frames? The fold-out measuring tongue of the Talmeter pocket retractable tape measure allows reliable internal measurements and simplifies reading recess depths and frame spans. How accurate is the device for trade and workshop tasks? The product meets EC accuracy class II, which provides the repeatability and tolerance expected for standard workshop and trade measuring tasks. What length and blade width does the tape offer? The tape extends to 3 m and has a blade width of 16 mm, giving a good balance between reach and rigidity for outward and short-span measurements. Will the housing withstand workshop conditions? The black ABS housing is designed for workshop use, offering impact resistance and protection for the internal mechanism during daily handling. Can the scribing tip be used directly on timber and metal? Yes, the integrated scribing tip is intended to transfer marks directly from the tape to common materials, aiding fast and accurate layout work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3m Tape Measure Two-Component ABS Case Magnetic Hook EG Class II - BMI
Take advantage of a compact measuring tool that combines a robust band mechanism, an ABS housing with soft-grip and a magnetic start hook for secure, repeatable measurements; order directly via Metav Werkzeuge or contact their consultants for procurement advice. twoComp pocket tape measure — 3 m × 16 mm, ABS housing, magnetic hook (BMI) A twoComp pocket tape measure built for workshop and site use, offering a 3 m steel blade, EC accuracy class II and a soft-grip ABS housing for safe handling. Robust band mechanism for long service life ABS housing with soft-grip for secure grip Automatic rewind with stopper for safer use Magnetic start hook for easy metal attachment Reliable accuracy for routine measuring tasks The compact tape delivers EC accuracy class II, making it suitable for general workshop and on-site measurement where consistent results are required. The combination of a 3 m blade and a 16 mm width balances reach with blade stability, reducing bending and improving readability during common tasks. The clear millimetre scale supports standard measurement workflows, while the robust band mechanism prolongs operational life and minimises downtime from mechanical wear. Built to withstand daily workshop demands A tough ABS housing with a grippy soft component ensures comfortable handling even when the tool is used frequently or in damp conditions. The case design integrates an automatic rewind with stopper, which secures the blade at the desired length and prevents rapid retraction, reducing the risk of injury and blade damage. A practical belt clip keeps the tape measure accessible, and the magnetic start hook secures the tape to ferrous surfaces for one-person measurements — a clear efficiency advantage on busy jobs. Practical benefits and ease of choice for buyers For procurement, this tape measure represents a pragmatic mix of durability, ergonomics and measurement reliability that supports everyday production and maintenance tasks. The short design and magnetic hook simplify single-operator work, while the EC class II specification gives a verifiable standard for quality control and tool selection. Technical enquiries regarding suitability for specific applications are welcomed; product details and measurements are documented for straightforward comparison. For secure, workshop-ready measuring tools from BMI, contact Metav Werkzeuge for tailored advice and availability: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000855888NW Manufacturer: BMI Type: twoCOMP Product: Pocket tape measure Facts Length: 3 m Blade width: 16 mm Accuracy: EC class II Packaging unit: 1 Special features Robust band mechanism Case material: ABS with soft-grip Automatic rewind with stopper Belt clip Magnetic start hook EC accuracy class II FAQ What is the measuring range and blade width? The tape offers a measuring range of 3 m with a 16 mm blade, specified on the BMI twoComp pocket tape measure (SKU 4000855888NW) for standard workshop tasks. Is the hook magnetic and how does that help? Yes, the start hook is magnetic; the magnetic start hook on the twoComp pocket tape measure secures to ferrous materials and enables one-person measuring on metal workpieces. What does EC accuracy class II mean for daily use? EC accuracy class II indicates the tool meets defined European accuracy tolerances suitable for general workshop measurement and routine quality checks with reliable repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3m Tape Measure Two-Component ABS Housing Automatic Rewind, Class II - BMI
Take advantage of the combination of durable construction, quick retraction and EC accuracy class II for consistent workshop measuring. Order the item directly via Metav Werkzeuge or consult our specialists for application advice. twoComp Pocket Tape Measure — 3 m, 16 mm, BMI twoComp is a compact pocket tape measure designed for fast, reliable linear measurement in workshops and trade environments Robust band mechanism for long service life ABS housing with soft grip for secure handling Automatic retraction with stopper for safe, fast use Belt clip for hands-free portability Built for dependable accuracy and continuous use The compact measuring tool delivers EC accuracy class II, which ensures repeatable results suitable for general workshop and construction tasks. The 3 m measuring blade, with a 16 mm width, provides a stable readout and reduces blade flex during use. The combination of a robust band mechanism and precision-graded markings means fewer re-measures and a smoother workflow, translating into lower idle time on repetitive jobs and improved process efficiency. Safer handling and faster measuring cycles A housing made from ABS combined with a soft-touch component improves grip and reduces slippage when working on ladders or in damp conditions. The automatic retraction with a stopper allows the blade to be locked at the required length and released quickly, supporting rapid measurements without compromising safety. The integrated belt clip keeps the tape measure accessible at all times, reducing search time and supporting uninterrupted task sequences. Practical applications and advantages on the job This pocket tape is suitable for site layout, cabinet fitting, profile cutting and general assembly work where accessible, reliable measuring is needed. The durable construction and clear scale markings lower the likelihood of measurement error during installation tasks and routine checks. Tradespeople and workshop professionals benefit from a compact tool that combines portability with measurement stability, enabling faster decision-making on the shop floor. Supply reliability and partner support that matters Sourced for dependable everyday use, the tape’s materials and mechanism minimise maintenance requirements and extend service life. Metav stands for democratisation of precision, supplying consistent quality from Emmerich and serving industry and craft with a broad product range. With an established track record and centralised logistics, Metav provides predictable availability and an experienced point of contact for procurement and technical queries. For reliable measuring in the workshop, contact Metav Werkzeuge to discuss BMI twoComp pocket tape measure availability and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000855884NW Manufacturer: BMI Product type: Pocket tape measure Packaging unit: 1 Core data Length: 3 m Blade width: 16 mm Accuracy: EC class II SKU / UID: 4000855884NW Special features Housing: ABS with soft-grip component Automatic retraction with stopper Robust band mechanism Belt clip FAQ Is the marking system suitable for construction use? The tape measure features clear, durable markings and an EC accuracy class II rating, making it suitable for common construction and workshop measuring tasks. Can the housing withstand daily workshop use? Yes, the housing is made from ABS with a soft-touch component for impact resistance and secure handling during daily operations. How does the automatic retraction stop work? The automatic retraction includes a mechanical stopper that locks the blade at the required length and releases smoothly for rapid measurement cycles. Is this tape measure suitable for tradespeople who work at height? The compact design, secure grip and belt clip make it well suited for trades that require portability and quick access, such as site carpentry or façade work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Scale Magnifier With Guided 10x Lens, Parallax-Free Reading, Stainless Steel, Case - Metav IndustryLine
Take advantage of the combination of parallax‑free reading, 10× guided magnification and robust stainless steel construction for dependable layout and inspection work; order directly via Metav Werkzeuge or consult our advisors for specification support. Ruler magnifier — stainless steel measuring ruler with guided loupe, 10× magnification (Metav IndustryLine) The Ruler magnifier is a workshop measuring aid with an integrated guided loupe designed for precise visual checks and layout tasks in metalworking and inspection environments Stainless steel construction 10× guided magnifier Parallax‑free reading Measuring range 0–400 mm Precise, repeatable readings for quality control The guided loupe and parallax‑free scale enable clear, reproducible readings that reduce interpretation errors during layout and inspection. With a stated accuracy of ±0.02 mm and a scale division of 0.1 mm, the instrument meets workshop demands where traceable repeatability is required. The combination of a magnified view and precise graduation accelerates inspection routines and supports reliable mark‑making on workpieces, which translates directly into fewer reworks and a smoother production flow. Robust construction and medium‑range handling Constructed from stainless steel, the device resists workshop wear and maintains straightness over time, helping to keep measurements consistent. An overall length of 450 mm accommodates comfortable two‑hand guidance while the actual measuring range of 0–400 mm places this instrument in the medium (300–500 mm) category — a practical compromise between reach and rigidity for fixtures, housings and medium‑sized components. The tool is supplied in a transport case for safe storage and transit, protecting the scale and loupe between use. Magnified inspection that speeds decision making The 10× guided magnifier brings fine edges, scribe lines and surface details into sharp focus so decisions about fit, finish and next operations can be made at the bench rather than on the machine. Faster visual checks reduce cycle times in incoming inspection and during in‑process control. The guided mounting keeps the magnifier aligned with the scale for consistent observation, improving operator confidence and reducing subjective judgement in critical checks. Choose Metav IndustryLine’s ruler magnifier for dependable, workshop‑ready precision and contact Metav Werkzeuge for tailored advice or to place an order by e‑mail or phone Technical data Article number: M903.208 GTIN: 4061905448973 Manufacturer: Metav IndustryLine Facts Measuring range: 0–400 mm Overall length: 450 mm Accuracy: ±0.02 mm Scale division: 0.1 mm Magnification: 10× Features Material: stainless steel Parallax‑free reading Supplied in transport case Category: Rulers (Lineale) FAQ What level of accuracy does this measuring ruler offer? The ruler magnifier from Metav IndustryLine provides an accuracy of ±0.02 mm, suitable for general workshop inspection and many quality‑control tasks. Is the magnifier fixed or adjustable? The guided loupe is mounted to maintain alignment with the scale; its guidance simplifies adjustment for repeatable inspection without losing sight of the graduation. Which measuring range classification applies to this instrument? With a measuring range up to 400 mm, this device is classified in the medium range (300–500 mm), balancing reach and rigidity for standard machine‑shop applications. Does the delivery include protective packaging? Yes, the instrument is supplied in a transport case to protect the stainless steel scale and magnifier during storage and transport. What is the product SKU for ordering and reference? Order reference SKU M903.208 (Metav IndustryLine) should be used when enquiring or placing orders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Steel Ruler Black Oxide, Hardened, Ground And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of the combination of DIN-compliant straightness, hardened tool-steel construction and a low-reflection finish for dependable inspection and layout work; order the instrument directly via Metav Werkzeuge or contact their consultants for application advice. Hairline straight edge 400 mm — DIN 874/00, hardened tool steel, blackened finish (Metav IndustryLine) Hairline straight edge 400 mm DIN 874/00 is a precision reference for inspection, alignment and layout tasks in workshop and production environments DIN 874/00 accuracy standard Fully hardened, ground and lapped Blackened finish for glare reduction 400 mm measurement length Reliable reference for inspection and setup The combination of DIN 874/00 conformity and a finely finished edge provides a reproducible datum for visual inspections and machine setup. Conformance to the standard indicates that straightness and edge quality meet established tolerances, which reduces measurement uncertainty and supports consistent quality control. Using a certified straight edge as the reference reduces rework and speeds up inspection routines, making processes measurable and repeatable with professional rigour. Robust construction for long service life Manufactured from tool steel that is fully hardened, ground and lapped, the instrument resists wear at the contact edge and retains its geometry under normal workshop use. The blackened surface minimises glare under shop lighting and offers additional surface protection against surface corrosion. The ground and lapped finishing steps ensure a uniformly flat reference face; in practical terms this means fewer adjustments and a longer interval between checks, delivering lower total cost of ownership for routine inspection equipment. Practical handling and workshop integration With a mid-length measuring span of 400 mm, the straight edge balances reach and rigidity for everyday tasks such as checking planeness, aligning guides and verifying machined faces. The slim hairline edge assists in precise visual alignment without obscuring the workpiece, while the robust body keeps the edge stable during use. For buyers who require further technical clarification or measurement planning, Metav provides straightforward application advice so the tool can be integrated reliably into existing inspection routines. For procurement or technical guidance on the Metav IndustryLine hairline straight edge, contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.024 GTIN: 4054469106144 Standard: DIN 874/00 Length: 400 mm Facts Tariff number: 90173000 Grade: 00 Special features Material: tool steel, fully hardened, ground and lapped Finish: blackened (schwarz bruniert) Category: Lineale Label: Hairline straight edge 400 mm DIN 874/00, blackened FAQ What applications suit this straight edge best? The hairline straight edge 400 mm DIN 874/00 is intended for inspection, alignment and layout tasks where a stable, low-reflection reference is required; it is suitable for workshop and production checks. How does the blackened finish affect use? The blackened finish on the Metav IndustryLine straight edge reduces glare and offers surface protection, improving visibility of the hairline edge during precision alignment. What does the DIN 874/00 designation mean for accuracy? DIN 874/00 indicates that the straightness and edge quality meet the recognised standard for straight edges, providing a documented basis for consistent inspection results with this Metav IndustryLine tool. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Steel Straight Edge, Hardened And Ground, DIN 874/00 - Metav IndustryLine
Take advantage of a hardened, stainless steel reference surface and conformity to DIN 874/00 to secure consistent inspection results and minimise rework on the shop floor. Order the straightedge directly via Metav Werkzeuge or consult our advisors if further application guidance is required. Precision straightedge INOX 400 mm DIN 874/00 — hardened stainless steel, ground & lapped (Metav IndustryLine) The Precision straightedge INOX 400 mm DIN 874/00 is a hardened stainless steel straightedge designed for workshop inspection, layout and comparative flatness checks across mechanical and toolroom applications. Hardened stainless-steel construction Ground and lapped reference surfaces Conforms to DIN 874/00 standard Ideal 400 mm length for bench inspection A stable reference for repeatable inspection results The straightedge serves as a reliable reference surface for visual and tactile flatness checks, alignment tasks and setup verification. Manufactured in stainless steel that is fully hardened, then ground and lapped, the tool resists wear and preserves its geometry under normal workshop use. Conformance to DIN 874/00 provides a standardised basis for comparative measurements, which simplifies acceptance criteria and reduces ambiguity during quality control. Durability and measurement integrity reduce downtime Because the material is fully hardened and the bearing faces are finely finished, the instrument maintains its nominal geometry over repeated use. The hardened substrate and precision finishing mean fewer re-grinds and longer intervals between servicing, supporting greater repeatability when checking straightness, squareness and reference edges. For machine shops and maintenance teams, this translates into fewer measurement-related delays and more predictable production throughput. Practical format for everyday workshop tasks The compact 400 mm length combines sufficient reach with convenient handling for bench inspection, layout work and small-assembly verification. The flat, lapped faces ensure clear contact for light-table checks or feeler-gauge comparison, while the robust finish simplifies cleaning and corrosion resistance in normal environments. Supplied as a ready-to-use inspection tool, the straightedge is suitable for use in toolrooms, maintenance departments and inspection benches where a hardened, stable rule is required. Speak to Metav Werkzeuge for tailored advice on the hardened stainless-steel straightedge and to secure stock from our Emmerich warehouse. Technical data SKU: M214.124 GTIN: 4054469106748 Manufacturer: Metav IndustryLine Standard: DIN 874/00 Facts Length: 400 mm ECLASS: 21170120 Tariff number: 90173000 Special features Material: Stainless steel, fully hardened, ground and lapped Category: Lineale FAQ What accuracy standard does this straightedge meet? The answer: The Precision straightedge INOX 400 mm DIN 874/00 is manufactured to the geometry specified by DIN 874/00, providing a standardised reference for routine flatness and alignment checks. Can the straightedge be used directly on machine beds and guideways? Yes. The straightedge’s hardened, ground and lapped faces make it suitable for comparative checks on bedways and guideways where a compact, rigid reference of 400 mm is appropriate. How should the tool be maintained to preserve its reference surface? Regular cleaning and storage in a dry environment are recommended; avoid coarse abrasives. The hardened and lapped finish resists wear, which helps retain the straightedge’s reference condition. Is the straightedge suitable for workshop inspection and toolroom calibration? The straightedge is intended for workshop inspection and layout tasks; for formal calibration procedures, consult Metav Werkzeuge for recommended calibration services and intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Tape Measure, Case 19 mm Steel Blade, Locking, Belt Clip - Metav IndustryLine
Take advantage of a robust combination of proven accuracy, compact handling and site-ready features: the compact M203.111 pocket tape delivers consistent readings with an EC accuracy class II tolerance and a 5 m × 19 mm steel tape in a resilient ABS housing; order directly via Metav Werkzeuge or contact our advisers for specification support. M203.111 pocket retractable tape measure — 5 m × 19 mm, ABS housing The M203.111 pocket retractable tape measure is a compact, workshop-grade measuring tool designed for general construction, metalworking and everyday site tasks, combining a steel measuring tape with a belt clip and positive-lock mechanism for fast, repeatable measurements. Durable ABS housing with belt clip Steel measuring tape 5 m × 19 mm Accuracy class II for reliable readings Positive-lock mechanism for fast measuring Dependable accuracy where it matters The pocket tape offers an EC class II accuracy rating, which means tolerances are suitable for most construction and workshop applications that require reliable, comparable results. The 5 m length and 19 mm tape width balance reach and stiffness, keeping the blade stable on longer spans and reducing sag. This makes the tool an efficient alternative to longer rulers for routine layout and verification tasks, allowing for quick verification of dimensions without complex setups. Built for daily use and straightforward handling Encased in a tough ABS housing, the measuring tape is light at approximately 0.21 kg, enabling easy one-handed operation and comfortable carry on site. The steel tape provides abrasion resistance and maintains clear graduation marks under frequent use. A mechanical positive-lock holds the blade securely during measurement, while the integrated belt clip keeps the tool accessible on the move—features that reduce handling time and limit measurement interruption in busy work environments. Practical features that speed up workflow The tape’s width and blade material contribute to a clear reading edge and reduced flex when extended, which supports faster, more accurate single-person measurements. The lock mechanism permits controlled retraction, protecting the blade and extending service life. The combination of durable construction, portable design and standardised accuracy makes this tape an economical choice for trade professionals and workshops that require a dependable, everyday measuring tool. For reliable site measurements choose the Metav IndustryLine M203.111; contact Metav Werkzeuge in Emmerich for procurement and technical advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M203.111 GTIN: 4054469181714 Brand: Metav IndustryLine Weight: 0.21 kg Facts Measuring range: 0–5,000 mm (5 m) Tape width: 19 mm Accuracy: Class II Special features ABS housing Steel measuring tape Belt clip Positive-lock mechanism EC class II accuracy FAQ Is this tape measure suitable for construction work? The M203.111 pocket retractable tape measure is well suited to construction and site use thanks to its 5 m range, 19 mm blade and EC accuracy class II rating. How is the tape held in place during measurement? A positive-lock mechanism secures the extended steel tape, enabling stable measurements and controlled retraction for the M203.111. What materials protect the tape and housing? The measuring blade is made of steel for wear resistance and the casing is made from robust ABS, both chosen to withstand everyday workshop use. Can the tape be worn on a belt or pocket? Yes, the device includes an integrated belt clip so the tape can be kept immediately to hand during tasks. What level of precision can be expected from this tool? With accuracy class II, this tape provides reliable readings for most workshop and site applications where standardised tolerances are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Accurate checks with precision straightedges
Precision straightedges are high-accuracy measuring tools designed to verify flatness and straightness across surfaces. Available in several lengths and finished from durable metals, these instruments provide a simple, repeatable method for alignment and inspection in industrial settings.
How precision straightedges work and where they are used
A precision straightedge is laid against a surface to reveal deviations from true flatness or a straight line, with fine graduations enabling careful assessment of run-out and planar error. Typical applications include mechanical engineering, electronics, optics and microscopy, machine tool build and quality control, where reliable visual or feeler-gauge inspection prevents assembly issues and functional failure.
Key advantages that cut waste and speed up production
- high accuracy and stable construction reduce measurement uncertainty and help maintain production tolerances.
- stainless steel or other precision metals ensure long service life and corrosion resistance.
- fine graduations and etched scales allow precise readings and repeatable checks.
- various lengths suit bench work as well as larger components, shortening setup time.
- simple handling lowers inspection time and contributes to fewer rejects and rework.
Why Metav is the practical choice for precision straightedges
Metav combines decade-long expertise with a broad range of measurement tools, making it a pragmatic partner for workshop and production buyers. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav operates from Emmerich as a quality filter for the european market, offering consistent availability and straightforward order processing. For those seeking a reliable source of precision straightedges and complementary measuring instruments, Metav’s range and technical information help select the correct specification for the intended inspection task.
In brief
Precision straightedges deliver fast, reliable assessments of flatness and straightness across industries, improving quality control and reducing scrap while being simple to use and maintain.
FAQ
What materials are precision straightedges typically made from?
Precision straightedges are commonly manufactured from stainless steel or other precision metals to ensure stability, wear resistance and longevity in industrial use.
In which industries are precision straightedges most valuable?
Precision straightedges are widely used in mechanical engineering, electronics, optics and microscopy, machine tool construction and general quality control where geometric accuracy is critical.
How is a precision straightedge used to check flatness?
Place the precision straightedge on the surface and inspect gaps visually or with feeler gauges; fine graduations and a straight reference edge make deviations from flatness evident for correction or further machining.
Are different lengths available for precision straightedges?
Yes, precision straightedges are offered in various lengths to match bench-top inspections as well as larger component checks, allowing selection of the most efficient tool for each application.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com