Reliable scales for precise industrial weighing
Scales are essential for accurate weight determination in production, laboratory and shipping environments, providing clear benefits in process control, quality assurance and legal compliance. A well-chosen scale delivers the required weighing range and readability while ensuring repeatable results for tasks such as quality control, recipe formulation or parcel handling, and integrates features like tare, counting and data export to streamline workflows. Consideration of environmental influences, routine calibration or legal verification and sturdy construction for heavy-duty use ensures consistent performance with precision scales, platform scales and counting scales.
10 kg Aluminium-Protected Case Padded, For Single Weights E1–M3 - KERN
Take advantage of a robust combination of aluminium protection, a padded interior and suitability for single calibration weights up to 10 kg, ensuring safe transport and reliable storage of sensitive masses; order the KERN aluminium‑protected case directly via Metav Werkzeuge or consult our specialists for assistance. Aluminium-protected case for single weights KERN 317-140-600 — aluminium, padded The Aluminium-protected case for single weights offers secure storage and transport for calibration weights used in laboratories, workshops and service rounds. Aluminium shell with internal padding For single weights up to 10 kg Suitable for classes E1–M3 Protect equipment during transport and storage The rigid aluminium outer shell provides a lightweight yet durable barrier against knocks and compression, while the padded interior cushions each weight to prevent scratches and preserve calibration surfaces. This reduces the risk of damage during handling and transit and therefore helps to maintain the calibration integrity of measurement equipment. The result is fewer service interruptions and lower refurbishment needs for precision masses. Designed for precise weight sets and compliance Engineered for single calibration weights in the knob/compact form, the case accommodates nominal masses up to 10 kg and supports weights classified E1–M3, offering a compact solution for certified mass sets. The internal layout secures items in a fixed position, which minimises movement that could affect traceability or require re‑verification after transport. For workshops and calibration labs, this equates to dependable handling that supports compliance with measurement standards. Practical handling that saves time on the workshop floor Weighing approximately 1.4 kg, the case remains easily portable without compromising protective performance. The format and padding enable rapid packing and unpacking during calibration rounds, shortening setup time and increasing productive hours. The combination of secure transport and quick access makes this case a practical asset for technicians who value efficiency and safeguarding precision instruments. Contact Metav Werkzeuge today for advice on the KERN aluminium‑protected case 317-140-600 and arrange secure delivery from our Emmerich warehouse Technical data Article number: 317-140-600 SKU: 317-140-600 GTIN: 4045761136038 Manufacturer: KERN Material: Aluminium Origin country: CN Commodity code: 84239090 Case weight: 1.4 kg For weights: up to 10 kg For classes: E1–M3 Special feature: padded Facts Weight (case): 1.4 kg Nominal weight capacity: 10 kg Classification range: E1–M3 GTIN: 4045761136038 Commodity code: 84239090 eCl@ss: 21100103 Special features Aluminium-protected outer shell Padded interior for single weights (knob/compact) Designed for calibration and secure transport Suitable for professional laboratories and workshops Compact, lightweight construction FAQ What nominal weights fit this case? The case is suitable for single nominal weights up to 10 kg and is designed to hold knob/compact style masses securely. Is the case compatible with E1 calibration classes? Yes, the design accommodates weights classified across the range E1 to M3, supporting high‑accuracy sets. How does the padding protect calibration surfaces? The padded interior prevents direct contact and abrasion between weights, preserving the surface finish and reducing the need for re‑verification. Can the case be used for non‑standard or irregularly shaped weights? The internal layout is optimised for knob/compact shapes; irregular weights may not be held as securely without additional customised support. Where is the product manufactured? The aluminium‑protected case is produced in CN and supplied under the KERN brand. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
10 kg Bending and Shear Beam Load Cell, Stainless Steel, 2 mV/V Output, IP68/IP69K - KERN
Take advantage of robust signal output and marine-grade construction to keep weighing processes reliable under demanding conditions; the combination of OIML C3 accuracy and IP68/IP69K protection supports uninterrupted production. Order directly via Metav Werkzeuge or ask our consultants for application-specific advice. CB.10-3Q1 bending and shear-beam load cell — stainless steel, IP68/IP69K The CB.10-3Q1 is a stainless steel bending and shear-beam load cell designed for industrial weighing applications and harsh environments Stainless steel construction IP68/IP69K protection OIML C3 accuracy class 2 mV/V rated output Consistent accuracy for process control The sensor provides a 2 mV/V rated output combined with OIML C3 classification to ensure stable, traceable weighing results in production and logistics environments. A defined analogue output simplifies integration with industrial indicators and PLCs, reducing the need for repeated signal conditioning and helping to maintain consistent measurement chains. This results in fewer process interruptions and clearer decision data for quality control and batching operations. Built to withstand harsh production environments Constructed from stainless steel and protected to IP68/IP69K, this load cell tolerates frequent washdowns and exposure to dust and moisture, making it suitable for food, pharmaceutical and chemical surroundings. The wide operating range of -30°C to 70°C ensures reliable performance across seasonally varying workplaces and cold-storage areas. Corrosion resistance and sealed design reduce maintenance cycles and support long service life in aggressive environments. Seamless integration with weighing systems and conveyors With a standard 4‑wire connection, the device integrates directly into existing weighing electronics and junction boxes. The construction suits platform scales, hopper scales and floor-scale installations commonly found in manufacturing and packaging lines. The vendor-grade build quality by KERN supports straightforward mechanical mounting and electrical connection, enabling converters and indicators to deliver repeatable measurements with minimal setup time. Reliable compliance and broad industry suitability The transducer meets CE and RoHS conformity and is optimised for applications across industry sectors including manufacturing, logistics, building materials and food processing. Its shear-beam architecture provides mechanical stability under eccentric loads, which helps to preserve calibration and reduces the need for frequent recalibration. Choosing this type of load cell supports continuous operation and predictable maintenance planning. Contact Metav Werkzeuge in Emmerich for tailored advice on scale design, installation options and compatibility: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technical data Article number: CB Q1 SKU: CB.10-3Q1 GTIN: 4045761220690 Manufacturer: KERN Country of origin: ES Compliance: CE, RoHS Core technical data Rated output: 2 mV/V Maximum capacity: 10 kg Operating temperature: -30°C to 70°C Weight: 0.5 kg Protection class: IP68/IP69K OIML accuracy class: C3 Standard: EN 60529 Special features Material: stainless steel Construction: bending and shear-beam load cell Connection: 4‑wire connection Suitable for: platform, hopper and floor scales Applications: industry, chemical, food and pharmaceutical, building materials, logistics and packaging Designed for harsh environment use and washdown FAQ What accuracy class does this load cell offer? The CB.10-3Q1 is specified to OIML C3, providing a reliable level of accuracy for many industrial weighing and batching applications. Is the device suitable for washdown and hygienic environments? Yes — the stainless steel construction and IP68/IP69K protection rating make the CB.10-3Q1 suitable for environments where frequent cleaning and ingress protection are required. Which weighing systems can this transducer be used with? The load cell is designed for mechanical and electrical compatibility with platform scales, hopper scales and floor scales commonly used in production and packaging lines. What signal output should be expected from the load cell? A rated output of 2 mV/V is provided, offering a robust analogue signal for connection to indicators, amplifiers or PLC-based weighing modules. Can this load cell operate in cold-storage or heated production areas? The operating range of -30°C to 70°C supports use in refrigerated environments as well as in warmer production settings. KERN, Country of origin: ES
10 kg Block Test Weight OIML Class M3 Painted Cast Iron, 5 g Tolerance - KERN
Benefit from a robust combination of OIML M3 conformity, a solid 10 kg nominal mass and a painted cast iron block design that supports consistent routine verification and easy handling. Order this calibration solution directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN 366-87 Calibration Block Weight (OIML M3, 10 kg) The KERN 366-87 is a 10 kg OIML M3 calibration block weight designed for reliable routine verification of industrial and commercial scales. OIML class M3 accuracy 10 kg painted cast iron block Tolerance 5 g for consistent checks Ensure measurement conformity with certified class and mass The central benefit of a calibration weight in OIML M3 is predictable, repeatable verification for medium-accuracy weighing instruments. The specified tolerance 5 g at 10 kg provides a clear quantitative basis for acceptance limits during routine checks. For workshops and small calibration labs this block form delivers a stable reference mass, reducing uncertainty in everyday verification tasks and supporting compliance with inspection routines and quality procedures. Durable design for frequent handling and practical use A painted cast iron construction combines robustness and corrosion resistance for frequent use in industrial environments. The block design lowers the centre of gravity compared with slender weights, improving stability during placement and reducing the risk of tipping on scale pans. This design choice also simplifies storage and stacking, making the weight suitable for workshop benches where practical durability matters as much as metrological performance. Practical guidance for use and maintenance To preserve accuracy, handle the weight with care and store it in a clean, dry place; avoid impacts that could alter mass. The product is intended as a reference for routine verification rather than as a primary calibration standard for accredited laboratories. Traceable lab calibration is recommended when absolute legal traceability is required. The compact, solid construction supports straightforward day-to-day use, while its documented OIML M3 rating and nominal 10 kg mass make it a cost-effective component in a regular verification schedule. For specialist guidance on integrating the KERN 366-87 into verification routines, contact Metav Werkzeuge in Emmerich for expert, practice-oriented advice from our quality team Technical data Article number: 366 SKU: 366-87 Manufacturer: KERN GTIN: 4045761012004 Facts Nominal mass: 10 kg OIML class: M3 Tolerance (OIML): 5 g Tariff number: 84239090 Country of origin: CN Special features Material: painted cast iron Shape: block Product group: calibration weight ECLASS: 32120103 FAQ What accuracy class does this weight meet? The KERN 366-87 meets OIML M3 accuracy requirements and is specified with a tolerance of 5 g at its 10 kg nominal mass. Is the block suitable for routine workshop verification? Yes, the block form and painted cast iron construction of the KERN 366-87 make it suitable for regular verification tasks in workshops and small calibration facilities. Can the weight be used as a primary reference standard? The KERN 366-87 serves as a practical verification weight; for primary traceability or accredited calibrations, a laboratory-issued certificate and higher-class standards are recommended. How should the calibration weight be cared for to retain accuracy? Handle the KERN 366-87 carefully, avoid impacts, and store it clean and dry; regular visual inspection and professional recalibration ensure ongoing reliability. Does the product include certification or a calibration certificate? Calibration documentation is not specified for the KERN 366-87 in the provided data; for documented traceability, request calibration services or certificates through Metav Werkzeuge. KERN — address not provided — contact not provided
10 kg Block Test Weight OIML M2, Painted Cast Iron, 1.6 g Tolerance - KERN
Benefit from precise, cost-effective calibration and a robust painted cast-iron block design that keeps routine verification simple and repeatable; the OIML M2 classification and 1.6 g nominal tolerance support dependable scale adjustment. Order the ECO Block Weight 10 kg directly via Metav Werkzeuge or ask our consultants if needed. ECO Block Weight, Class M2 (10 kg) — KERN calibration weight The ECO Block Weight, Class M2 is a 10 kg calibration mass designed for routine verification and adjustment of industrial and laboratory scales, offering resilient construction for regular shop-floor use. OIML class M2 for routine verification Robust painted cast-iron block design Nominal mass 10 kg with 1.6 g tolerance Ensure consistent measurement results with certified mass accuracy The OIML M2 classification combined with a nominal mass of 10 kg and a stated tolerance of 1.6 g provides a reliable baseline for regular verification tasks. This level of accuracy is suited to many workshop and industrial weighing applications where reproducible readings are required rather than legal-for-trade primary standards. Using a certified mass reduces the risk of drift in production weighing processes and supports routine traceability when recorded in calibration logs. The clear numeric tolerance assists procurement and quality teams in comparing alternatives objectively. Built to withstand frequent handling while simplifying maintenance Constructed from painted cast iron, the block format delivers mechanical robustness for repeated handling in a busy workshop environment. The compact block shape allows straightforward placement on balance pans and stable contact with the weighing surface, helping to reduce handling error during calibration cycles. The painted finish offers surface protection against typical shop-floor wear, preserving mass integrity and appearance over time. As a simple, single-piece mass, this item requires minimal maintenance while delivering durable performance for everyday verification work. Streamline inventory and traceability within calibration workflows Identified by SKU 356-77 and GTIN 4045761241794, the mass integrates into asset registers and procurement systems for effortless tracking. The origin and tariff classification are available for logistics and customs: Origin: CN, HS tariff 84239090. Clear labelling and standard identifiers help maintenance and quality teams plan recalibration intervals, allocate assets to specific stations and compare measured deviations against the declared tolerance. Together, these attributes support efficient administration of weighing equipment and reduce downtime associated with uncertainty in measurement. For dependable shop-floor calibration supply and expert advice on integration, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss procurement and delivery options. Technical data Manufacturer: KERN SKU: 356-77 GTIN: 4045761241794 Article number: 356 Origin: CN HS tariff: 84239090 Facts Nominal mass: 10 kg Tolerance (OIML): 1.6 g OIML class: M2 Special features Material: painted cast iron Design: block mass for routine verification Suitable for industrial and laboratory scale checks FAQ What applications is this mass suitable for? This mass is intended for routine verification and adjustment of industrial and laboratory scales; the ECO Block Weight (Class M2, 10 kg) is appropriate where an OIML M2 level of accuracy meets process requirements. Does the mass come with standard identifiers for inventory? Yes, the KERN calibration mass is listed as SKU 356-77 with GTIN 4045761241794, enabling straightforward integration into asset registers and procurement systems. How should the mass be handled and stored to maintain accuracy? Handle the painted cast-iron block with clean hands or gloves, store on a stable shelf or in protective packaging, and avoid prolonged exposure to corrosive environments to preserve the surface and mass integrity. Can this mass be used for legal-for-trade calibrations? The ECO Block Weight is OIML Class M2 and is intended for routine verification; it is not a primary legal-for-trade reference standard typically required for the highest-accuracy statutory calibrations. KERN; Metav Werkzeuge (Emmerich am Rhein) — info@metav-werkzeuge.com — +49 2822 7131930
10 kg Block Weight OIML M2, Painted Cast Iron, 1.6 g Tolerance - KERN
Reliable mass verification with OIML class M2 accuracy and a defined tolerance of 1.6 g meets routine calibration requirements; the robust painted cast iron block construction ensures long service life and handling stability. Order the KERN 356-87 directly via Metav Werkzeuge or contact our consultants for further technical advice. KERN 356-87 — 10 kg calibration block weight, OIML class M2 The KERN 356-87 is a 10 kg block-style calibration weight designed for routine verification of industrial scales and workshop balances. OIML class M2 accuracy 10 kg nominal mass Cast iron, painted finish Robust block design for stable handling Proven accuracy for routine verification The 10 kg block provides OIML class M2 performance with a certified tolerance of 1.6 g, making it suitable for regular checks of workshop and industrial weighing equipment. The defined OIML specification offers a clear technical basis for conformity checks and reduces uncertainty when verifying load cells and platform scales. This level of accuracy supports efficient maintenance cycles and helps ensure compliance with operational calibration schedules. Durable construction for everyday use Manufactured from painted cast iron, the block design offers mechanical resilience and surface protection against workshop wear. The compact, single-weight format simplifies storage and handling while maintaining a stable centre of mass for repeatable results. This durability translates into a lower total cost of ownership through fewer replacements and reliable performance under routine operational stress. Easy integration into calibration workflows The block shape and nominal mass of 10 kg make the weight straightforward to use during in-house verification routines or as part of a set of reference masses. The specification suits industrial scales, counting scales and many workshop balances where an M2-class reference is appropriate. Clear technical parameters support decision-making when defining calibration intervals and traceability chains for quality management systems. Traceability and identification for inventory control The product is supplied by KERN and is identifiable by SKU 356-87 and GTIN 4045761248298, supporting inventory tracking and documentation. Country of origin and tariff code are recorded for logistical clarity. The combination of recognised manufacturer identification and measurable technical data aids record keeping and audit processes within production and quality departments. For a reliable supply of KERN calibration weights and personalised technical guidance, contact Metav Werkzeuge — request specification support or a procurement recommendation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 356 SKU: 356-87 GTIN: 4045761248298 Manufacturer: KERN Facts Nominal mass: 10 kg OIML class: M2 OIML tolerance: 1.6 g Material: Cast iron, painted Country of origin: CN Tariff code: 84239090 Special features Block design Single weight Category: Calibration weights / Test weights ECLASS: 32120103 FAQ What level of accuracy does this calibration weight provide? The KERN 356-87 is specified as OIML class M2 with an OIML tolerance of 1.6 g, providing defined accuracy for routine verification of industrial scales. Is the 10 kg block suitable for workshop use? Yes, the 10 kg block weight is designed for workshop and industrial environments; its painted cast iron construction offers robustness for regular handling and verification tasks. How is the weight identified for inventory and traceability? Identification is possible via SKU 356-87 and GTIN 4045761248298, which support stock control and traceability records for the KERN calibration weight. Can this weight be used for higher-precision laboratory balances? OIML class M2 is intended for routine industrial and workshop verification rather than high-precision laboratory calibration; select a higher OIML class for laboratory-grade traceability if required. Does the product include certification details? The KERN 356-87 is supplied with the technical parameters shown; for specific certification documents or calibration certificates, consult Metav Werkzeuge to confirm available documentation. KERN — Origin: China; Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com, +49 2822 7131930, WhatsApp +49 170 2837271
10 kg Calibration Block Weight OIML M1, Cast Iron Coated, 500 mg Tolerance - KERN
Take advantage of high accuracy, durable construction and simple compliance: the lacquered cast-iron block delivers stable mass reference with OIML M1 tolerance and a nominal 10 kg mass; order directly via Metav Werkzeuge or consult our specialists for application advice. Block calibration weight 346-87 — 10 kg, OIML M1 (KERN) The Block calibration weight 346-87 is a 10 kg OIML M1 cast-iron block designed for reliable verification and routine calibration of laboratory and industrial scales. Single calibration weight, OIML class M1 Nominal mass 10 kg with 500 mg tolerance Cast iron, lacquered surface for durability Consistent accuracy for routine verification A clearly defined OIML M1 classification and a nominal 10 kg mass ensure this reference weight supports regular verification tasks with measurable confidence. The stated tolerance of 500 mg corresponds to a deviation band of 0.5 g, making the component suitable where traceable mass standards are required for quality control. By supplying a stable reference value, the weight reduces the risk of measurement drift and supports compliance with internal procedures and third‑party audits. Robust construction for workshop and lab environments Manufactured from cast iron with a lacquered finish, the unit combines mechanical stability with surface protection. The block form factor provides a low centre of gravity and easy handling during placement on platforms, while the coating helps to resist minor corrosion and contamination in mixed‑use environments. This durability translates into fewer replacements and dependable repeatability over time, supporting uninterrupted production and service schedules. Simplified integration into calibration workflows As a single, standardised calibration item in OIML class M1, this block is straightforward to document within calibration logs and asset registers. The compact, block design facilitates storage and transport between test stations and reduces handling complexity during multi‑point verifications. When combined with a clear GTIN and SKU, traceability is improved and inventory management becomes more efficient for shops and laboratories that maintain calibrated instrument fleets. For secure and traceable measurements choose the KERN 346-87; contact Metav Werkzeuge in Emmerich for tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: T346-8-A SKU: 346-87 GTIN: 4045761241633 Manufacturer: KERN Tariff number: 84239090 Country of origin: CN Facts Nominal mass: 10 kg Tolerance (OIML): 500 mg OIML class: M1 eCl@ss: 32120103 Special features Material: Cast iron, lacquered Design: Block weight Product group: OIML M1 calibration weights Category: Calibration weights (Prüfgewichte) FAQ What accuracy can be expected from this weight? The KERN 346-87 is an OIML M1 calibration weight with a specified tolerance of 500 mg, which corresponds to a maximum allowable deviation of 0.5 g for a 10 kg nominal mass. Is this weight suitable for industrial scale verification? Yes; the block form and 10 kg nominal mass make it appropriate for routine verification of industrial and laboratory scales within the accuracy class covered by OIML M1. How should the calibration weight be stored to preserve accuracy? Store the block weight in a dry, temperature‑stable environment and avoid direct contact with corrosive substances; regular visual inspection and controlled handling help preserve the lacquered surface and measurement stability. Does the lacquered finish affect handling or measurements? The lacquered coating provides surface protection without altering the calibrated mass when handled correctly; normal cleaning and avoidance of heavy abrasion will maintain its condition. KERN — sold by Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930
10 kg Calibration Weight Block Eco Painted Cast Iron, OIML Class M3, 5 g Tolerance - KERN
Take advantage of the combination of reliable accuracy, robust cast-iron construction and a compact block design for straightforward calibration workflows. Order the calibration weight directly via Metav Werkzeuge or consult the Metav team for specification advice. ECO block weight — Calibration weight, OIML Class M3 (KERN) The ECO block weight is a cast-iron calibration weight designed for routine checks and adjustment of industrial balances and workshop scales OIML Class M3 for routine calibration Nominal value 10 kg for heavy-duty scales Painted cast iron for robust handling Compact block design for stable placement Consistent conformity for routine calibration tasks The ECO block weight meets OIML Class M3, offering a clear specification for routine calibration and in-house checks. The declared tolerance 5 g provides a predictable margin for adjustment tasks and comparative measurements, enabling traceable calibration procedures without unnecessary complexity. Compliance with this classification supports consistent measurement chains in production environments and helps operators maintain documented accuracy for quality control processes. Durable construction that reduces handling risk Manufactured from painted cast iron, the block design delivers mechanical resilience and a reliable contact surface for placement on balance pans. The robust finish protects against surface wear during regular use in workshops, while the compact geometry helps prevent unintended rolling or misplacement. These characteristics minimise handling errors and downtime, contributing to a smoother metrological routine and lower replacement frequency compared with more delicate masses. Practical use and straightforward care As a single-piece calibration weight, the unit is intended for direct placement on balances and scales for verification and adjustment. The solid block shape ensures stable seating and repeatable results. For best long-term performance, maintain a clean, dry storage environment, avoid strong impacts and inspect the mass before critical measurements. Regular recalibration by an accredited laboratory will preserve traceability and measurement reliability over the service life. Reliable supply and procurement for workshops and shops Sourcing the block from a recognised manufacturer such as KERN and distributing it through Metav Werkzeuge guarantees a pragmatic balance between cost and functionality. Metav’s role as a quality filter for the European market, combined with an extensive product range and a long track record of satisfied customers, supports dependable procurement and a clear logistics path from stock to workshop bench. Contact Metav Werkzeuge to discuss the suitability of this KERN calibration weight (SKU 366-77) for specific applications or to request a procurement proposal — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 366-77 Manufacturer: KERN GTIN: 4045761241831 Country of origin: China Tariff number: 84239090 Facts Nominal weight: 10 kg Tolerance: 5 g OIML class: M3 Materials & features Material: painted cast iron Design: ECO block Application: calibration and routine verification of balances and scales Format: single calibration mass FAQ What does OIML Class M3 indicate for this calibration weight? OIML Class M3 denotes the accuracy classification applicable to the ECO block weight; the KERN block (SKU 366-77) is therefore intended for routine calibration and adjustment rather than the highest-precision laboratory reference. Is this weight suitable for industrial scale checks? Yes, the 10 kg block is suitable for routine checks and adjustment of industrial and workshop scales where OIML Class M3 accuracy is appropriate. How precise is the 10 kg specification? The 10 kg nominal value for this calibration mass carries a tolerance of 5 g, meaning deviations within that range are within the stated specification for M3 class items. How should the calibration weight be stored to maintain accuracy? Store the painted cast-iron block dry and protected from corrosive environments, avoid shocks, and clean with a soft cloth; periodic verification or recalibration preserves measurement traceability. Can this be used for legal-for-trade verification? Use for legal-for-trade verification depends on local statutory requirements; the KERN ECO block weight in OIML Class M3 is typically used for internal checks and routine calibration—confirm national regulations if legal verification is required. KERN — China
10 kg Calibration Weight Block OIML F2 Stainless Steel Bead-Blasted, 160 mg Tolerance - KERN
Benefit from the combination of precise OIML F2 accuracy, a robust stainless‑steel block form and clear calibration guidance for consistent measurement results. Order the calibration weight directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. KERN 336-37 Calibration weight — 10 kg, OIML F2 The KERN 336-37 calibration weight is a single, block‑style reference mass for calibrating balances and scales in industrial and laboratory environments OIML class F2 accuracy, 160 mg tolerance Solid stainless‑steel block design Nominal value 10 kg for balance calibration Glass‑bead blasted finish for corrosion resistance Accurate reference mass for repeatable calibration routines The OIML F2 classification and a tolerance of 160 mg at the 10 kg nominal value provide a dependable baseline for mid‑range balance verification. As a calibrated reference mass, this block supports traceable calibration procedures and reduces measurement uncertainty during routine checks. The combination of class specification and measurable tolerance means fewer rechecks and improved process reliability when aligning production or laboratory weighing equipment. Robust construction that withstands workshop handling Manufactured from stainless steel with a glass‑bead blasted surface, the block delivers long‑term dimensional and mass stability under normal workshop conditions. The compact block format ensures stable placement on weighing pans and simplifies handling compared with cylindrical designs. The KERN 336-37 benefits from corrosion‑resistant finishing, which helps maintain surface integrity and mass constancy over time; for transport and storage, a protective case is strongly recommended to preserve accuracy. Compliance and calibration advice for assured traceability This single‑weight solution meets OIML requirements for a reliable calibration reference and is ideal for workflows where documented traceability matters. Note that EC first verification will no longer be possible from 30 November 2025; a DAkkS calibration is the advised alternative to secure official traceability for most applications. Selecting a DAkkS‑calibrated reference mass ensures conformity with statutory and quality‑management demands while supporting consistent measurement performance. Contact Metav Werkzeuge in Emmerich for specification advice, DAkkS calibration options and accessory recommendations for the KERN 336-37 calibration weight Technical Data Article number: 336 SKU: 336-37 Manufacturer: KERN GTIN: 4045761232815 Tariff number: 84239090 Core technical data Nominal mass: 10 kg OIML class: F2 Tolerance: 160 mg ECLASS: 32120103 Special features Block design Single weight Material: stainless steel, glass‑bead blasted Country of origin: Germany Recommendation: protective case; DAkkS calibration advised FAQ What accuracy class does this calibration weight comply with? The KERN 336-37 calibration weight complies with OIML F2 and carries a tolerance of 160 mg for the 10 kg nominal mass, making it suitable as a reference mass in many industrial and laboratory calibration scenarios. Is this weight suitable for both laboratory balances and industrial scales? Yes, the 10 kg nominal value and F2 classification make the block appropriate for mid‑range laboratory balances and industrial weighing equipment where an F2 reference mass is specified. Does the weight require special handling or storage? Due to the high accuracy class, a protective case is recommended to prevent contamination and mechanical damage; Metav Werkzeuge offers suitable etuis in the accessories section for secure transport and storage. Can this weight still receive EC first verification? EC first verification will no longer be possible from 30 November 2025; for traceable conformity, a DAkkS calibration is recommended for the KERN 336-37. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
10 kg Calibration Weight Block Polished Stainless Steel OIML Class F1, 50 mg Tolerance - KERN
Take advantage of proven traceability and robust construction combined with simple handling for reliable balance verification. The polished stainless-steel block design and OIML Class F1 accuracy ensure repeatable mass values; order directly via Metav Werkzeuge or consult our specialists for calibration and accessory recommendations. KERN 326-37 block calibration weight (OIML Class F1, 10 kg) The KERN 326-37 is a precision calibration weight in a knob-shaped block, designed for verification of laboratory and industrial balances with high repeatability OIML class F1 accuracy 10 kg nominal mass Polished stainless steel finish Knob-shaped block for easy handling Consistent results through certified accuracy The calibrated block offers OIML Class F1 performance with a nominal mass of 10 kg and a specified tolerance of 50 mg, which supports reproducible verification routines for mid-range balances. The tight tolerance reduces measurement uncertainty during routine checks and helps maintain production quality. The specification is suitable for laboratory and industrial verification tasks where mid-level precision is required and where documented mass values contribute to traceability. Robust material and ergonomic design for daily use Constructed from polished stainless steel, the block resists corrosion and can be cleaned without affecting the mass surface, reducing maintenance effort and extending service life. The knob-shaped geometry improves handling during calibration cycles, lowering the risk of slips and accidental surface contact that might alter the mass. The compact block design also minimises footprint in storage and work areas, while the polished finish helps to avoid particulate build-up that could influence repeated comparisons. Compliance, calibration and recommended accessories With the approaching change in marking procedures, the product data notes that initial EU-type approvals will not be available after 30 November 2025; a DAkkS calibration is therefore recommended for traceable certification equivalent for most applications. For storage and transport, a protective case is advised to preserve accuracy and prevent handling marks. When documented traceability and official calibration certificates are required, choose accredited calibration options to ensure the mass values meet organisational and regulatory demands. Contact Metav Werkzeuge in Emmerich for advice on DAkkS calibration, accessory cases and procurement of the KERN 326-37 calibration weight via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 326-37 GTIN: 4045761232860 Manufacturer: KERN Origin: Germany Form: Knob-shaped block Facts Nominal mass: 10 kg OIML class: F1 Tolerance: 50 mg Tariff code: 84239090 Special features Polished stainless steel Knob-shaped block design Recommended protective case for transport and storage Suitable for verification of laboratory and industrial balances DAkkS calibration recommended FAQ What level of accuracy does this weight provide? The KERN 326-37 calibration weight meets OIML Class F1 with a tolerance of 50 mg, making it suitable for reproducible balance verifications and mid-level precision checks. Is the material suitable for workshop environments? Yes, the polished stainless-steel construction resists corrosion and is suitable for both laboratory and industrial environments where routine cleaning and durability are required. Should the weight be calibrated before first use? A DAkkS calibration is recommended to obtain traceable certification; this aligns the KERN 326-37 with documented measurement systems and regulatory needs. How should the weight be handled to preserve accuracy? Handle the knob-shaped block by the designated grip, avoid touching the mass surfaces, and store in a protective case to prevent surface damage that could affect the mass value. Can this weight be used for legal-for-trade approval? The weight is specified to OIML Class F1; note that initial EU-type approval processes change from 30 November 2025, so DAkkS calibration is advised for equivalent traceability in most applications. KERN, Germany – contact details not provided in product data
10 kg Calibration Weight Block Stainless Steel, OIML Class M1, 500 mg Tolerance - KERN
Take advantage of the combination of OIML Class M1 accuracy, a robust 10 kg stainless steel block and a fine 500 mg tolerance for reliable verification of scales and balances; order the KERN 346-07 directly via Metav Werkzeuge or contact our consultants for advice and DAkkS calibration. KERN 346-07 — Calibration weight, OIML Class M1, 10 kg stainless steel block The KERN 346-07 is a 10 kg OIML M1 block calibration weight designed for laboratory and industrial scale verification. OIML class M1 calibration accuracy 10 kg nominal mass for scale verification Shot‑blasted stainless steel block design Precision where measurement certainty matters A calibration mass in OIML Class M1 provides defined limits of permissible error, here 500 mg, which establishes a clear baseline for test and verification routines. This level of accuracy reduces measurement uncertainty during routine checks and acceptance tests. The specified 10 kg nominal mass makes the unit suitable for mid‑range balances and industrial scales, enabling consistent, repeatable results and supporting quality assurance processes. Robust construction for regular workshop and lab use The block form, manufactured from stainless steel with a glass‑bead blasted finish, is engineered for frequent handling and minimal surface contamination. The compact block shape offers stable seating on weighing pans and a low centre of gravity, which simplifies placement and reduces the risk of tipping. The corrosion‑resistant finish and German manufacture contribute to long service life and dependable physical integrity in mixed workshop and laboratory environments. Clear technical meaning and calibration guidance Tolerance figures such as 500 mg indicate the permissible deviation from the nominal mass and are used when assessing whether a scale falls within its required performance limits. For legally traceable verification, a DAkkS calibration is recommended; note that EG type approval for calibration weights will not be possible after 30.11.2025. A DAkkS certificate provides documented traceability to national standards and is accepted for almost all practical calibration needs in industry and commerce. Practical handling and integration into workflows For accurate results, handle the standard with clean, dry gloves and store it in a stable, dust‑free environment when not in use to preserve mass integrity. Incorporate the weight into regular verification schedules and calibration logs to ensure documented traceability and to support internal quality audits. The compact block design eases transport between workstations while maintaining robustness for routine industrial use. For traceable verification with KERN quality, request DAkkS calibration and procure through Metav Werkzeuge in Emmerich — our specialists advise on specification, certification and delivery Technical data Article number: 346 Manufacturer: KERN SKU: 346-07 GTIN: 4045761117136 Facts Nominal mass: 10 kg OIML class: M1 Tolerance: 500 mg Tariff code: 84239090 Special features Block design Material: stainless steel, glass‑bead blasted Origin: Germany Recommended: DAkkS calibration; EG type approval not possible after 30.11.2025 FAQ What level of accuracy does this weight provide? The KERN 346-07 is manufactured to OIML Class M1 specifications with a tolerance of 500 mg, making it suitable for verification of mid‑range balances and industrial scales. Is DAkkS calibration available for this calibration weight? Yes, DAkkS calibration is recommended for the KERN 346-07 and provides full traceability to national standards; this is advised especially since EG type approval will be discontinued after 30.11.2025. Can the weight be used in workshop environments? The shot‑blasted stainless steel block construction of the KERN 346-07 is designed for regular workshop and laboratory handling and offers good resistance to contamination and wear. How should the weight be stored to maintain accuracy? Store the KERN 346-07 in a clean, dry place and handle with gloves to prevent oils and residues from affecting its mass; regular recalibration should be scheduled according to internal quality procedures. What applications are typical for a 10 kg M1 calibration weight? A 10 kg M1 standard like the KERN 346-07 is commonly used for routine verification, performance checks and adjustment of industrial scales and larger laboratory balances. Metav Werkzeuge — Emmerich am Rhein, Germany · eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271
10 kg Calibration Weight Button Shape Fine-Turned Stainless Steel, OIML M2 - KERN
Take advantage of the combination of OIML class M2 accuracy, a robust 10 kg nominal mass and a secure knob shape for safe handling; order directly via Metav Werkzeuge or consult our specialists for seamless integration into calibration routines. KERN 357-14 single calibration weight — 10 kg, OIML Class M2, stainless steel The KERN 357-14 single calibration weight is a precision reference mass for laboratory and industrial scale verification, presented in a knob form for safe handling. OIML class M2 accuracy 10 kg nominal mass Finely turned stainless steel surface Knob form for secure handling Precision where verification counts The OIML Class M2 designation signals that this weight is suitable for routine calibration and verification tasks in industrial and laboratory environments. As a 10 kg nominal mass, it functions as a stable reference during comparative checks of scales and balances, helping to maintain measurement consistency across production and inspection processes. By using a standardised reference mass, measurement uncertainty is reduced and error sources are easier to identify, supporting efficient decision-making in quality control. Built for reliable handling and long-term stability Manufactured from finely turned stainless steel, the weight resists corrosion and is straightforward to clean, which preserves measurement reliability over repeated use. The knob form provides a firm grip for safe placement and removal from balances, reducing the risk of accidental knocks that can alter calibration. The compact design and smooth finish lower the likelihood of contamination transfer, making the unit a durable component of daily verification routines and minimising operational interruptions. Seamless integration into quality processes This single calibration mass fits directly into routine checking procedures and helps to standardise verification across multiple workstations. As a robust reference, it contributes to faster fault detection and fewer measurement-related reworks. Procurement via Metav Werkzeuge provides access to a broad range of complementary reference standards and a consistent supply chain from Emmerich am Rhein, supporting centralised inventory management and dependable replenishment when building or consolidating a calibration kit. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN 357-14 into existing verification routines — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 357 SKU: 357-14 Manufacturer: KERN Facts Nominal mass: 10 kg OIML class: M2 Special features Material: finely turned stainless steel Shape: knob form Product type: single calibration weight FAQ What does OIML class M2 mean for everyday calibration work? OIML class M2 indicates that the weight meets internationally recognised tolerances appropriate for routine calibration and verification of industrial and laboratory scales; the KERN 357-14 single calibration weight is designed for such repeat checks. Can this weight be used on precision laboratory balances? Yes, the 10 kg nominal mass of the KERN 357-14 is suitable as a reference for comparative verification on appropriate balances and scales, taking into account the instrument’s specified capacity and recommended test mass ranges. How should the weight be handled and stored to preserve accuracy? Handle the stainless steel knob with clean gloves or use tweezers where practicable, and store the weight in a dry, dust-free case; following these measures helps keep the 357-14 within expected performance between verifications. Is special cleaning required for the stainless steel finish? Routine cleaning with a soft, lint-free cloth and a mild, non-abrasive cleaner preserves the finely turned stainless steel surface of the KERN 357-14 and prevents contamination that could affect repeatability. Does the product come with identification markings or SKU references? The single calibration weight is supplied as the KERN 357-14 (SKU 357-14), which serves as the reference identifier for ordering and inventory management. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930 — WhatsApp +49 170 2837271
10 kg Calibration Weight Knob And Cylinder Form OIML Class M3, Painted Cast Iron, 5 g Tolerance - KERN
Benefit from precise OIML M3 accuracy, robust painted cast iron construction and a practical knob for safe handling — ideal for routine verification of industrial scales. Order the calibration weight directly via Metav Werkzeuge or consult our specialists for application advice. KERN 366-97 Calibration Weight (OIML M3, 10 kg) — Painted Cast Iron, Knob & Cylinder A KERN 366-97 calibration weight designed for traceable verification of industrial and workshop balances, supplied in a knob-and-cylinder shape for reliable handling. OIML M3 calibration class Nominal value 10 kg Painted cast iron construction Knob for secure handling Accurate class compliance for routine verification The OIML M3 classification provides a recognised balance between cost and metrological reliability, making this weight suitable for periodic checking of floor and industrial scales. With a nominal value of 10 kg and an OIML tolerance of 5 g, the mass can be integrated into regular control procedures to document repeatable results. The clarified class designation supports compliance protocols and internal quality records without over‑specification for non‑calibration-laboratory environments. Robust construction that reduces handling risk Manufactured from painted cast iron, the weight resists surface wear and offers long service life in workshop conditions. The knob-and-cylinder form prevents slippage during placement, speeding up repetitive checks and lowering the risk of accidental drops. The solid construction also simplifies storage and routine maintenance: light cleaning and careful handling preserve the protective coating and the stated tolerance over many cycles. Practical dimensions and traceable identification Compact dimensions of 121×193 mm for the cylinder shape allow straightforward use on large balances and weighing platforms where space is constrained. Clear identification via the SKU and GTIN ensures traceability in inventory systems and calibration logs, while the origin (Germany) signals established manufacturing practices. Together, these aspects support efficient workshop workflows and make integration into existing verification routines straightforward. Reliability for workshop and industrial environments The single‑weight design is optimised for frequent use on industrial scales, offering a pragmatic combination of durability and metrological performance. The painted finish reduces corrosion risk in standard ambient conditions, while the knob simplifies lifting and placement — features that contribute to fewer interruptions in production and quicker verification cycles. Confidence in routine checks is a practical advantage for quality-conscious operations. Contact Metav Werkzeuge for application guidance or to order the KERN 366-97 calibration weight directly — specialists in precision tools from Emmerich with supply certainty for industry and trade. Technical data Article number: 366 SKU: 366-97 GTIN: 4045761012165 Manufacturer: KERN Origin: Germany Material: Painted cast iron OIML class: M3 Form: Knob and cylinder Commodity code: 84239090 Facts Nominal value: 10 kg Tolerance (OIML): 5 g Dimensions (cylinder): 121×193 mm Special features Single weight Painted cast iron finish Knob for secure handling OIML M3 compliance FAQ Is this weight suitable for routine verification of industrial floor scales? Yes, the KERN 366-97 calibration weight (OIML M3, 10 kg) is intended for routine verification tasks on industrial and workshop scales where an M3 class weight meets operational requirements. How precise is the KERN 366-97 and what does the tolerance mean? The stated tolerance of 5 g (OIML M3) indicates the permissible deviation for the 10 kg nominal mass and is appropriate for regular control checks rather than primary laboratory calibrations. What maintenance is required to preserve the weight's accuracy? Regular visual inspection and light cleaning of the painted cast iron surface are recommended; avoid abrasive cleaners and impacts to the knob or cylindrical surfaces to maintain the specified tolerance. Can the weight be used on small bench balances? While physically usable on some large bench balances, the 10 kg nominal mass and cylinder dimensions make it most practical for floor and industrial scales rather than precision laboratory balances. Does the product include traceability documentation? The KERN 366-97 is identified by SKU and GTIN for inventory and traceability; certification or calibration certificates must be requested separately if required for accredited calibration records. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930
10 kg Calibration Weight Three-Point Button, OIML F1, Polished Stainless Steel, 50 mg Tolerance - KERN
Take advantage of the combination of precision, durable polished stainless steel and class-leading accuracy for dependable calibration results; order the single 10 kg calibration weight directly via Metav Werkzeuge or ask our consultants if needed. KERN 327-14 – Single OIML F1 10 kg calibration weight with knob, polished stainless steel The KERN 327-14 is a single calibration weight designed for laboratory and industrial scale verification, supplied in knob form and finished in polished stainless steel for durable, repeatable use. OIML Class F1 accuracy Nominal value 10 kg Polished stainless steel construction Knob form for secure placement Consistent accuracy for routine verification The OIML F1 classification and a nominal value of 10 kg mean this calibration weight is intended where precise reference masses are required for routine checks and instrument verification. The declared tolerance of 50 mg (0.05 g) defines the permissible deviation and helps to calculate measurement uncertainty when adjusting or checking balances. Using a reference mass with known, certified limits reduces downtime during calibration cycles and supports quicker decision-making in quality control processes. The technical specification provides a measurable basis for conformity with internal and external metrology procedures. Designed for safe handling and long service life A knob-shaped head simplifies handling on precision balances and reduces the risk of fingerprints or contamination affecting readings; the polished stainless steel finish assists in cleaning and resists corrosion in normal workshop environments. The form factor facilitates exact placement on pans and minimises lateral movement during weighing operations. Given the high accuracy class, a protective case is recommended to preserve the surface and the mass value during storage and transport. Note that the EC initial verification of test weights will no longer be possible from 30 November 2025; a DAkkS calibration is therefore recommended for traceable results and is accepted for most calibration workflows. Built for traceability and robust workflows Manufactured to meet professional metrology expectations and marked with clear identifiers, this single reference mass supports documented traceability within production and laboratory settings. The stainless construction and compact design contribute to stable long-term behaviour, reducing the frequency of adjustments and preserving calibration intervals. Origin information and classification assist in maintaining audit trails and compliance records. When integrated into a scheduled verification plan, the weight helps to maintain measurement reliability across process-critical scales and balances. For traceable calibration and expert advice on the KERN 327-14, contact Metav Werkzeuge in Emmerich for DAkkS calibration options, case recommendations and immediate ordering via info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271) Technical data Article number: 327 SKU: 327-14 GTIN: 4045761004849 Manufacturer: KERN Country of origin: DE Commodity code: 84239090 Facts OIML class: F1 Nominal value: 10 kg Tolerance: 50 mg Cylinder dimensions: 100 × 185 mm Special features Material: Polished stainless steel Form: Knob form Product type: Single calibration weight Recommendation: Protective case recommended due to high accuracy class Eclass: 32120103 FAQ What accuracy class does this calibration weight have? The KERN 327-14 is classified as OIML F1, providing the high precision required for many laboratory and industrial verification tasks. Is a protective case necessary for this reference mass? A protective case is recommended for the 10 kg single weight to preserve the polished stainless steel surface and to maintain the declared tolerance during storage and transport. Can the weight be used for legal-for-trade verifications? The KERN 327-14 is an OIML F1 reference mass; note that EC initial verification will not be possible from 30 November 2025, and a DAkkS calibration is suggested for traceability and most calibration needs. What is the nominal tolerance and how does it affect measurements? The declared tolerance is 50 mg; this determines the allowable deviation and is used to calculate measurement uncertainty when verifying or adjusting balances. Which materials and form factor are specified for ease of use? The weight is made of polished stainless steel in a knob form, which improves handling during placement and cleaning in routine calibration procedures. Metav Werkzeuge GmbH, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271
10 kg Calibration Weight, OIML F2 Knob, Turned Stainless Steel, 160 mg Tolerance - KERN
Take advantage of precision, robust stainless-steel construction and certified accuracy to maintain reliable measurement standards in production and laboratory environments; order the weight directly via Metav Werkzeuge or consult our specialists for application advice. KERN 337-14 — Calibration weight, 10 kg, OIML F2, fine-turned stainless steel The KERN 337-14 is a single calibration weight in knob form intended for verification and calibration of industrial and laboratory scales, especially where OIML F2 accuracy is required OIML class F2 certified Nominal value 10 kg Fine-turned stainless steel Knob shape for secure handling Precise calibration that reduces rework and uncertainty The mass standard delivers consistent, traceable results thanks to its OIML F2 classification and a nominal value of 10 kg with a tolerance of 160 mg. This level of accuracy supports reproducible calibration routines and helps to reduce measurement-related rejects and downtime. For operations where repeatable weighing performance is essential, the balanced tolerance provides a reliable baseline for routine checks and documentation. Robust stainless-steel construction for long service life Manufactured from fine-turned stainless steel, the weight resists corrosion and surface wear while maintaining geometric stability. The knob-shaped design allows safe placement and removal on balances with minimal handling errors, reducing the risk of contamination or accidental knocks. These material and design choices extend the working life of the mass standard and lower the total cost of ownership through fewer replacements. Compliance and practical handling for everyday workflows Certified as OIML class F2, the weight meets recognised international tolerances and is suitable for routine calibrations in workshops and quality departments. The 160 mg tolerance is clearly stated and enables straightforward comparison against specification limits when documenting conformity. A protective case is recommended for storage and transport to preserve accuracy during periods of non-use and to simplify traceability management. Suited to labs, service technicians and inspection routines Designed as a single verification mass, the weight is appropriate for calibration tasks on testing benches, service calls and internal quality audits. Its construction and tolerance make it a practical choice where dependable mass references are required without the need for a complete set. Supplied by a reputable manufacturer, the unit supports standardised procedures and contributes to consistent measurement quality across production and maintenance workflows. Contact Metav Werkzeuge in Emmerich for personal advice on integrating this KERN 337-14 calibration weight into existing calibration plans or to arrange supply and secure packaging Technical data Article number: 337 SKU: 337-14 GTIN: 4045761006553 Manufacturer: KERN Country of origin: DE Facts Nominal mass: 10 kg Tolerance (OIML F2): 160 mg Dimensions (cylinder): 100 × 178 mm Harmonised system code: 84239090 Special features Material: fine-turned stainless steel Shape: knob form Class: OIML F2 single weight Recommended accessory: protective case for storage and transport FAQ What is the accuracy class of this calibration weight? The calibration weight is certified as OIML class F2, providing a tolerance of 160 mg at the nominal value of 10 kg, suitable for routine verification tasks. Can this weight be used on laboratory and industrial scales? Yes, the 10 kg mass is suitable for both laboratory and industrial balances where an OIML F2 single weight is required for calibration or verification. How should the weight be stored to preserve accuracy? Store the weight in a protective case when not in use; this KERN 337-14 unit benefits from clean, dry storage and minimal handling to maintain its tolerance. What material is the weight made from and why does that matter? The weight is made from fine-turned stainless steel, which offers corrosion resistance and stable geometry, helping to sustain accuracy over time. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
10 kg Hanging Scale Mobile LCD 0.01 kg Readability Peak-Hold, TÃœV EN 13155/EN 61010-1 - KERN
Take advantage of a TÜV-certified design combined with precise 10 kg capacity and 0.01 kg readability for reliable spot checks and quality control. The compact instrument delivers clear readings via an LCD and Hold/Peak functions, while long battery life and a foldable steel hook ensure practical mobile use. Order through Metav Werkzeuge or request tailored advice from our consultants for seamless integration into workshop workflows. KERN HDB 10K10N — Handheld hanging scale, 10 kg capacity with 0.01 kg readability A KERN HDB 10K10N is a compact, TÜV-certified hanging scale for fast, mobile weighing in logistics, workshops, hunting and domestic applications TÜV-tested to EN 13155 and EN 61010 10 kg range with 0.01 kg readability Hold and Peak-Hold functions for clear reading Foldable steel hook and portable design Accurate checks that speed up inspection and goods handling The instrument combines a strain gauge weighing system with a fine readability of 0.01 kg, offering consistent results for routine checks and incoming/outgoing goods verification. Linearity of ±0.03 kg and reproducibility of 0.01 kg mean fewer retakes and faster throughput on the packing bench or at the gate. The precise numeric data enables straightforward traceability in quality processes, supporting efficient decision-making and minimising rework. Certified safety and clear readings for confident operation Built to recognised standards, the device is TÜV-certified to EN 13155 (loose load lifters) and EN 61010 (electrical safety), so mechanical safety and electrical protection are addressed. The LCD display with 12 mm digit height and both Hold and Peak‑Hold functions make values easy to read even in poor light or when loads swing. A foldable steel hook simplifies transport and stowage, while the robust construction supports repeated use on site or in busy warehouses. Portable design tailored for workshop and field applications Weighing only 0.2 kg and measuring 72×25×105 mm (housing without removable parts), the unit is genuinely portable for on‑the‑spot checks—from workshop benches and building sites to hunting and small‑animal weighing. The scale runs on 2×1.5 V AAA cells with a rated battery life of 180 h, suited to extended shifts away from mains power. Environmental tolerance (operating range 5 °C–35 °C, max humidity 90%) and a compact footprint deliver practical convenience without compromising measurement quality. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN HDB 10K10N into your workflow or to request delivery and specification support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: HDB.10K10N GTIN: 4045761135536 Manufacturer: KERN Origin: CN Facts Weighing range: 10 kg Readability: 0.01 kg (10 g) Linearity: ±0.03 kg Reproducibility: 0.01 kg Display type: LCD Display digit height: 12 mm Battery: 2×1.5 V AAA Battery life: 180 h Weight: 0.2 kg Dimensions (housing): 72×25×105 mm Operating temperature: 5 °C–35 °C Max relative humidity: 90% Special features TÜV conformity EN 13155 and EN 61010 Weighing system: strain gauge Hold function for frozen readings Peak‑Hold for peak load indication Foldable steel hook included Ideal for logistics, workshops, hunting, luggage checks and small‑animal weighing FAQ What accuracy can be expected from this hanging scale? The KERN HDB 10K10N provides a readability of 0.01 kg, reproducibility of 0.01 kg and linearity of ±0.03 kg, suitable for reliable control weighing and routine checks. Is the scale certified for safe lifting and electrical use? Yes — the device meets TÜV requirements to EN 13155 (loose load lifters) and EN 61010 (electrical safety), covering mechanical load safety and electrical protection. How long does the battery last in normal use? Using 2×1.5 V AAA cells, the KERN HDB 10K10N is specified for approximately 180 h of operation under typical conditions. Can the instrument be used outdoors or on building sites? The scale operates within 5 °C–35 °C and up to 90% relative humidity, and its compact, lightweight build makes it suitable for fieldwork, building sites and mobile workshop tasks. Which applications suit this hanging scale best? The unit is designed for quick control weighing in logistics, workshops, building sites, hunting, luggage checks, small‑animal weighing and similar scenarios where portable, certified weighing is required. KERN — Origin: CN
10 kg Miniature Button Force Load Cell Stainless Steel, IP65, 1.5-2.0 mV/V, G5 - KERN
Take advantage of the combination of compact stainless steel construction, repeatable high accuracy and IP65 protection for reliable force and weight measurement in confined installations. Order the transducer directly via Metav Werkzeuge or consult our specialists for integration support. Miniature button load cell CO 10‑Y2 — stainless steel, 10 kg nominal (KERN) The Miniature button load cell CO 10‑Y2 is a compact stainless steel transducer designed for precise tension and compression force measurement in testing rigs, weighing tasks and laboratory applications. High precision 0.5% F.S. Stainless steel construction IP65 Sensitivity 1.5–2.0 mV/V Suitable for tension and compression OIML class G5 accuracy Consistent accuracy for lab and test environments The compact KERN button transducer delivers a combined error of 0.5% F.S., which means consistent and traceable readings for quality control and test benches. The specified G5 classification denotes a high standard of measurement reliability within its class, reducing the need for repeated checks and shortening test cycles. For engineers facing tight tolerances, the measurable stability of this component supports reproducible results and smoother process validation. Robust miniaturised design for harsh or confined setups Constructed from stainless steel with an ingress protection of IP65, the miniature button format resists corrosion and ingress of dust or light spray, enabling mounting in compact or exposed positions. The low mass (approx. 0.07 kg) and compact footprint reduce mechanical loading on fixtures, while the hardened construction minimises wear in repetitive loading applications. These attributes translate into longer service intervals and lower maintenance effort for production and R&D environments. Clear electrical output and system compatibility The transducer provides a nominal sensitivity of 1.5–2.0 mV/V, a standard analogue output that pairs with most signal conditioners, amplifiers and data acquisition systems. The predictable mV/V range simplifies calibration and amplifier selection, so integration into an existing measurement chain is straightforward. Designed for both tension and compression measurement, the unit is suitable where bidirectional force monitoring or small‑scale weighing is required, such as component testing, biomechanical setups and precision assembly lines. Versatile application footprint with regulatory conformity Ideal for research and development, machine building, automotive suppliers and medical technology, the sensor is RoHS compliant and supports use in calibration technology and test equipment. The miniature load element is optimised for force testing rigs and small weighing systems, offering a compact solution where larger transducers are impractical. Paired with Metav Werkzeuge’s quality filter and supply chain, the device provides a reliable route to deployment for workshops and industrial customers seeking repeatable measurement performance. For reliable precision measurement in compact installations, choose the KERN CO 10‑Y2 and contact Metav Werkzeuge in Emmerich for tailored advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and procurement assistance Technical data Article number / SKU: CO.10‑Y2 Manufacturer: KERN GTIN: 4045761232921 Origin: CN Facts Nominal load: 10 kg Sensitivity: 1.5–2.0 mV/V Combined error: 0.5% F.S. OIML classification: G5 Weight: 0.07 kg Protection class: IP65 Tariff number: 84239010 Special features Miniature button design Material: stainless steel RoHS compliant Suitable for tension and compression applications For weighing, force measurement and force testing rigs Intended industries: research & development, machine building, automotive, medical technology, calibration and test equipment FAQ What accuracy can be expected from this load element? The KERN miniature button load cell CO 10‑Y2 offers a combined error of 0.5% F.S. and is classified as G5, providing high repeatability for laboratory and industrial testing. Which environments is the sensor suitable for? With a stainless steel body and IP65 protection, the transducer tolerates dusty environments and light spray; it is appropriate for bench‑top test rigs and many shopfloor conditions. What signal output does the device provide for data acquisition? The device outputs a nominal sensitivity of 1.5–2.0 mV/V, compatible with standard amplifiers and signal conditioners used in precision measurement systems. Metav Werkzeuge, Emmerich am Rhein, Germany — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930
10 kg Miniature Button Load Cell Stainless Steel, High Precision 0.5% F.S., IP65 - KERN
The combination of a compact stainless‑steel button design, high precision (combined error 0.5% F.S.) and IP65 protection ensures dependable compression and weight measurement in tight installations; order the sensor directly via Metav Werkzeuge or consult our specialists for integration advice. KERN CO.10‑Y1 Miniature Button Load Cell — stainless steel, 10 kg, IP65 The KERN CO.10‑Y1 is a stainless‑steel miniature button load cell designed for compression, weighing and force test‑stand applications in research, industry and calibration environments High precision, combined error 0.5% F.S. Stainless‑steel miniature button design Rated load 10 kg / 100 N IP65 protection for reliable use Accurate measurement in confined spaces The compact button form factor delivers high precision within a minimal footprint, making the sensor suitable for fixtures and test rigs where space is limited. The small stainless‑steel housing minimises mechanical interference while providing a stable mounting surface; this ensures repeatable readings and reduces the need for extensive fixturing. Engineers benefit from consistent results during proofing and R&D work because the construction keeps mechanical hysteresis and creep low, supporting reliable process data and reproducible testing. Built to withstand industrial environments A stainless‑steel body combined with IP65 protection provides resistance against dust ingress and splash water, increasing uptime in workshop and lab conditions. The device is RoHS compliant, reflecting material choices that meet modern regulatory requirements. These characteristics make the sensor suitable for machine‑building, automotive component testing and medical‑technology fixtures where corrosion resistance and conformity are essential for long service life. Clear electrical output and conformity for signal processing With a rated output of 1.0–1.5 mV/V, the transducer supplies a standard analogue signal compatible with common amplifiers and signal conditioners, simplifying integration into existing data‑acquisition chains. The element meets G5 accuracy class criteria, so calibration and comparative measurements remain straightforward. A nominal load of 10 kg / 100 N makes the unit appropriate for light‑force applications, and the low mass of the sensor reduces influence on delicate test setups. Practical application scope and user benefits The design is optimised for compression and force measurement in test stands, laboratory balances and bespoke measuring rigs. Typical sectors include research and development, machine building and automotive supply chains, as well as medical and calibration technology where precise, compact load sensing is required. The button geometry supports straightforward mounting and rapid replacement, reducing downtime and simplifying maintenance cycles. Contact Metav Werkzeuge for detailed specification matching and integration advice on the KERN CO.10‑Y1; our Emmerich team will recommend the correct signal conditioning and delivery options for your application. Technical data Article number: CO.10‑Y1 Manufacturer: KERN GTIN: 4045761232938 Origin: China Product group: Load cells Core specifications Nominal load: 10 kg / 100 N Combined error: 0.5% F.S. Rated output: 1.0–1.5 mV/V OIML class: G5 Weight: 0.05 kg Protection class: IP65 HS code: 84239010 Materials & applications Material: stainless steel Suitable for: compression/force measurements, weighing, test stands RoHS compliant Compact button design Ideal for R&D, machine building, automotive, medical technology, calibration FAQ What nominal load and accuracy does the sensor offer? The KERN CO.10‑Y1 has a nominal load of 10 kg (100 N) and a combined error of 0.5% F.S.; it is classified to OIML G5 for consistent comparative measurements. Is the unit suitable for use in damp or dusty environments? Yes — the stainless‑steel housing and IP65 protection class permit use where splash water or dust exposure is possible, though the sensor is not rated for continuous immersion. What signal output should be expected for integration? The transducer provides a rated output of 1.0–1.5 mV/V, compatible with standard amplifiers and data‑acquisition modules, facilitating straightforward integration into measurement chains. Which industries and applications are most appropriate for this device? Typical applications include research and development, force testing on machine‑building benches, automotive component testing, medical‑technology fixtures and calibration equipment where compact, accurate compression sensing is required. Manufacturer: KERN; Distribution/Dealer: Metav Werkzeuge, Emmerich am Rhein, Germany • Email: info@metav-werkzeuge.com • Phone: +49 2822 7131930
10 kg Precision Calibration Weight Stainless Steel Fine-Turned Stackable, OIML Class M1 - KERN
Take advantage of precise, certified mass standards and robust stainless‑steel finishing to keep verification routines efficient and traceable; the stackable design reduces handling time and protects the weight when not in use. Order the product directly via Metav Werkzeuge or ask our consultants if needed. KERN 347-141 Calibration weight — OIML class M1, 10 kg, turned stainless steel The KERN 347-141 calibration weight is a stackable, OIML M1 reference mass designed for routine verification and calibration of industrial and laboratory scales. Calibration weight KERN 347-141, OIML class M1 Nominal mass 10 kg, tolerance 500 mg Turned stainless steel, corrosion resistant Stackable design for safe storage Assured accuracy for routine verification The OIML class M1 designation ensures the weight meets recognised international tolerances, with a nominal mass of 10 kg and a tolerance of 500 mg, providing a dependable reference for mid‑range calibrations. Such classification supports traceable verification of balances and scales used in production control and quality assurance. By specifying an OIML‑rated reference, measurement uncertainty from the mass standard is minimised, aiding compliance with internal quality processes and external audit requirements. Durable construction tailored to workshop environments Manufactured from turned stainless steel, the weight combines dimensional stability with resistance to corrosion and staining, extending service life in workshop and laboratory settings. The machined finish reduces dirt accumulation and simplifies cleaning after repeated handling. The stackable form factor secures individual weights during storage and transport, reducing the risk of damage and ensuring that reference masses remain within specification for longer periods. Integration into efficient calibration workflows As a control weight, the unit is suitable for quick spot checks and routine calibration cycles, supporting fast decision‑making on the shop floor. Its compact cylinder dimensions (136×132 mm) and clear identification via SKU and GTIN allow simple inventory handling and traceability within calibration logs. Using a certified reference mass reduces downtime for balances and contributes to reliable production output by enabling fast verification without the need for complex equipment or procedures. Reliability backed by recognised manufacturing Produced by KERN, the component reflects established manufacturing standards for precision masses. The combination of certified accuracy and rugged materials makes this product appropriate for maintenance departments, calibration labs and industrial metrology applications where dependable, repeatable results are essential. Pairing such a mass with documented calibration intervals supports consistent measurement quality across operations. For precise calibration and dependable stock supply, contact Metav Werkzeuge in Emmerich to arrange delivery of the KERN 347-141 calibration weight or to discuss suitability for specific scales — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 347 SKU: 347-141 Manufacturer: KERN GTIN: 4045761008915 Country of origin: DE Facts Nominal mass: 10 kg Tolerance (OIML M1): 500 mg OIML class: M1 Cylinder dimensions: 136×132 mm Commodity code: 84239090 Special features Material: turned stainless steel Stackable Application: control/calibration weight FAQ What level of accuracy does this calibration weight provide? The KERN 347-141 calibration weight is OIML class M1 with a tolerance of 500 mg on a 10 kg nominal mass, making it suitable for routine verification tasks and mid‑range calibrations. Is this weight suitable for use in both workshops and laboratories? Yes, the turned stainless‑steel construction and stackable design make the weight robust enough for workshop environments while offering the precision required in laboratory verification routines. How does the stackable design benefit storage and handling? Stackability reduces the footprint during storage, protects individual masses from impact, and simplifies inventory management, helping to maintain the condition and accuracy of the weights. Which identifiers confirm the product and origin? The product is supplied by KERN (SKU 347-141) with GTIN 4045761008915 and is marked with country of origin DE. Can this weight be used for daily control checks on production scales? Yes, as a control weight with OIML class M1 specification and a 10 kg nominal mass, it is appropriate for routine spot checks and ongoing verification of industrial scales. KERN, Germany, GTIN 4045761008915
10 kg Precision Check Weight Stackable, Polished Stainless Steel, OIML Class F1 - KERN
Benefit from consistent measurement results thanks to OIML F1 accuracy, a polished stainless steel surface and a stackable design for safe storage — order directly via Metav Werkzeuge or consult our specialists for accessory recommendations such as a protective etui. KERN 327-141 calibration weight — OIML F1, 10 kg, polished stainless steel The KERN 327-141 is a stackable control weight for precise verification and routine checks of laboratory and workshop scales OIML class F1 certified accuracy 10 kg nominal value Polished stainless steel finish Stackable design for secure storage Reliable accuracy for routine checks and calibrations Designed for consistent repeatability, this calibration weight meets OIML F1 specifications with a declared tolerance of 50 mg, making it suitable for routine verification and control tasks where tight tolerances are required. The 10 kg nominal value provides a practical reference point for a wide range of industrial and laboratory scales. By choosing a weight with certified class and documented tolerance, firms reduce uncertainty in measurement results and support quality control processes with objective, comparable data. Robust finish and practical handling that protects investment The polished stainless steel construction resists corrosion and retains its surface integrity under regular use, which reduces maintenance effort and extends service life. Its button form and compact cylinder dimensions (136×132 mm) enable secure placement and easy handling on balances and comparison stands. The stackable design saves bench or storage space and supports organised storage routines; paired with a suitable protective etui, the handling risks during transport and storage are minimised. Traceability and conformity support for regulated workflows With the EG initial verification no longer available after 30.11.2025, a DAkkS calibration is recommended for most applications to ensure traceability and documented conformity. The weight is manufactured by KERN in Germany and is suitable as a control weight in calibration loops, audits and internal quality assurance. For facilities requiring documented measurement chains, professional calibration and appropriate documentation help to satisfy certification and inspection demands while maintaining measurement confidence. For professional advice on suitable accessories or calibration options, and to order this control weight via Metav Werkzeuge, please contact our consultants who will guide on etui selection and DAkkS services Technical data Article number: 327 SKU: 327-141 GTIN: 4045761004856 Manufacturer: KERN Origin: DE Specifications Nominal weight: 10 kg Tolerance (OIML F1): 50 mg Dimensions (cylinder): 136×132 mm Form: Button shape Materials & features Material: Polished stainless steel Stackable ECLASS: 32120103 Tariff code: 84239090 FAQ What accuracy class does this calibration weight belong to? The calibration weight is specified as OIML F1, with a declared tolerance of 50 mg, suitable for precise control measurements. Is the 10 kg weight suitable for laboratory and workshop use? Yes, the 10 kg nominal value and robust polished stainless steel design make this control weight suitable for both laboratory and workshop verification tasks. Is a calibration certificate available and what is recommended? A DAkkS calibration is recommended for traceability and documented conformity; Metav Werkzeuge can advise on DAkkS services for the KERN 327-141. Can the weight be stacked for compact storage? The unit features a stackable design that enables secure, space-saving storage when multiple weights are used together. Are protective cases recommended for this precision weight? Due to the fine tolerance of the weight, a protective etui is recommended to reduce handling damage and preserve accuracy; Metav Werkzeuge can suggest appropriate cases. KERN — Germany. Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271
10 kg Precision Control Weight Three-Point Stainless Steel Fine-Turned, OIML F2, 160 mg Tolerance - KERN
Benefit from the combination of OIML class F2 accuracy, a 10 kg nominal mass and a finely turned stainless steel finish to achieve repeatable calibration results; order the reference weight directly via Metav Werkzeuge or consult our specialists for accessory recommendations. KERN 337-141 Calibration Weight – 10 kg, OIML class F2, finely turned stainless steel A KERN 337-141 calibration weight designed for traceable verification of balances and scales in laboratories and workshops. OIML class F2 accuracy Nominal value 10 kg Finely turned stainless steel Stackable for compact storage Precision that ensures traceable results The calibration weight is specified as OIML class F2, with a nominal mass of 10 kg and a declared tolerance of 160 mg, making it suitable for precise verification tasks in quality control and laboratory environments. Class F2 denotes a defined maximum permissible error for reference masses used to check analytical and precision balances; this guarantees that adjustments and routine checks are performed against a test mass with measurable and certified limits. Using a weight with these specifications supports documented traceability and simplifies internal audit trails. Robust finish for consistent handling Manufactured from finely turned stainless steel, the reference mass resists corrosion and surface wear, which helps maintain its metrological characteristics over time. The smooth finish reduces contamination and makes careful handling straightforward during calibration runs. The product is also stackable, enabling compact storage and reduced risk of accidental damage when multiple weights are kept together. The combination of material quality and machining method contributes to stable repeatability during repeated verification procedures. Practical recommendations for measurement workflows For reliable long-term use, store the calibration weight in a protective case to avoid surface marks and minimise handling contamination; a case is particularly recommended for weights in the F2 class to preserve accuracy. When performing calibrations, allow the weight to reach room temperature and handle it with clean gloves or tweezers to avoid oil transfer. Integrating this reference mass into regular maintenance schedules reduces adjustment time for balances and supports consistent measurement results across production and inspection routines. Select the KERN 337-141 for dependable verification and contact Metav Werkzeuge in Emmerich for accessory recommendations, secure supply and specialist advice (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: 337 SKU: 337-141 GTIN: 4045761006577 Manufacturer: KERN Country of origin: Germany Facts Nominal value: 10 kg Tolerance (OIML F2): 160 mg Dimensions (cylinder): 136×132 mm Mass: 10 kg Special features Material: finely turned stainless steel Product category: single calibration weight Product group: OIML F2 Stackable Harmonised System number: 84239090 FAQ What level of accuracy does this reference weight provide? The KERN 337-141 is classified as OIML class F2 with a tolerance of 160 mg, making it suitable for verification of precision and laboratory balances where class F2 is required. Is the weight suitable for regular calibration routines in a workshop environment? Yes. The 10 kg calibration weight is intended as a control mass for routine checks and adjustments of balances in workshops and laboratories, offering repeatable results due to its material and machining. How should the calibration weight be stored to preserve accuracy? A protective case is recommended for the KERN 337-141 to avoid surface damage and contamination; store in a dry, temperature-stable environment and handle with gloves or tweezers. What is the material and why does it matter? The weight is made from finely turned stainless steel, which ensures corrosion resistance and a stable surface finish—both important for preserving metrological properties over time. Can multiple weights be stored together safely? Yes. The design is stackable, which allows compact storage of multiple weights while helping to protect surfaces when combined with suitable protective cases. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271
10 kg Precision Test Weight Button Shape Polished Stainless Steel, OIML E2 16 mg Tolerance - KERN
Combine OIML class E2 accuracy, a 10 kg nominal mass and a polished stainless-steel finish for dependable calibration results; order the calibration weight directly via Metav Werkzeuge or consult our advisors for tailored calibration options. KERN 317-14 — Calibration weight, OIML class E2, 10 kg, polished stainless steel The KERN 317-14 is a precision single calibration weight designed for balance verification and laboratory checks, featuring a knob form for safe handling and a corrosion-resistant polished stainless-steel finish. OIML class E2 accuracy, tolerance 16 mg Nominal mass 10 kg with knob form Polished stainless steel for longevity DAkkS calibration recommended for traceability Consistent measurement performance for certification and routine checks The calibrated mass delivers OIML class E2 performance with a specified tolerance of 16 mg, ensuring repeatable, legally relevant verification results for mid-range balances and precision scales. This level of accuracy directly supports traceable measurement chains and reduces uncertainty in weight-controlled processes. The combination of a clearly defined nominal mass (10 kg) and tight tolerance simplifies documentation for quality management systems and enables faster decision-making when checking instrument drift or performing routine verification. Robust handling and corrosion resistance that protect measurement integrity A knob form design provides secure handling during calibration cycles, reducing the risk of contamination or accidental contact with sensitive surfaces. Constructed from polished stainless steel, the mass resists oxidisation and surface degradation, which helps to maintain its calibration state over repeated use. The finish also eases cleaning and storage procedures, lowering the maintenance effort required in demanding workshop or laboratory environments while preserving the mass’s metrological stability. Calibration pathway and regulatory guidance for traceability As an alternative to first-entry EC verification, a DAkkS calibration is recommended for nearly all applications, delivering accredited traceability to national standards. Note that EC initial verification of weights will not be possible after 30 November 2025; planning an accredited calibration route ensures continued compliance. The mass’s design and nominal value make it suitable for establishing calibration chains, reference checks and periodic recalibration schedules that align with internal quality requirements and external audits. For certified calibration and practical advice on the KERN 317-14, contact Metav Werkzeuge in Emmerich for DAkkS options and storage recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 317 SKU: 317-14 Manufacturer: KERN GTIN: 4045761003767 Origin: DE Facts Nominal mass: 10 kg Tolerance (OIML E2): 16 mg Dimensions (cylinder): 100×185 mm Tariff number: 84239090 ECLASS: 32120103 Special features Material: polished stainless steel Form: knob form OIML class: E2 Recommendation: DAkkS calibration available Storage note: case recommended for this weight Regulatory note: EC initial verification not possible from 30.11.2025 FAQ What accuracy class does this calibration weight meet? The KERN 317-14 meets OIML class E2 with a tolerance of 16 mg, suitable for medium-accuracy balance verification. Is the material suitable for workshop use and easy cleaning? Yes. The polished stainless-steel construction of the 317-14 resists corrosion and is straightforward to clean, helping to preserve calibration integrity. Can this weight be used for traceable calibrations? A DAkkS calibration is recommended for traceability; the KERN 317-14 can be supplied and documented to support accredited calibration chains. What handling features reduce contamination risk? The knob form design provides a secure grip for safe handling and minimises direct contact with the calibration surface of the 317-14. Are storage accessories recommended? For this accuracy class, a protective case is recommended; Metav Werkzeuge can advise on compatible etuis and accessories. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271
10 kg Precision Test Weight Knob Form, OIML Class M1, Stainless Steel Turned - KERN
Take advantage of the combination of OIML class M1 accuracy, a 10 kg nominal mass and a fine-turned stainless steel finish for reliable calibration cycles; order the KERN 347-14 calibration weight directly via Metav Werkzeuge or consult our advisors for DAkkS calibration options. KERN 347-14 — 10 kg calibration weight, OIML class M1, knob form A KERN 347-14 calibration weight designed for precise scale verification and routine laboratory or workshop checks. OIML class M1 accuracy Nominal mass 10 kg Fine-turned stainless steel finish Knob form for secure handling Consistent accuracy for dependable results The weight meets OIML class M1 requirements with a declared tolerance of 500 mg, providing a dependable reference for verification and quality control. This level of conformity reduces measurement uncertainty during routine calibrations and supports consistent process control across production or laboratory environments. By using a verified reference mass with a clear tolerance band, audits and internal checks become more straightforward, and measurement drift can be identified and corrected quickly, maintaining operational efficiency. Robust design that endures daily use Manufactured from stainless steel and precision turned, the mass offers resistance to corrosion and maintains surface integrity after repeated handling. The knob form simplifies placement and removal from weighing instruments, lowering the risk of accidental contact and preserving the mass value. Durable construction means fewer replacements and less downtime, so maintenance cycles remain predictable and workshop throughput is sustained. Traceability and calibration aligned with current standards With the EG declaration on calibration weights no longer possible after 30 November 2025, a DAkkS calibration is the recommended route for traceable documentation. A documented calibration route ensures compliance with internal quality systems and external audits. Choosing a traceable calibration service for this reference mass secures measurement history for long-term record-keeping and supports conformity assessments where documented evidence of accuracy is required. For traceable delivery and calibration options for the KERN 347-14, contact Metav Werkzeuge in Emmerich to arrange supply and DAkkS calibration tailored to application needs Technical data Article number: 347 SKU: 347-14 Manufacturer: KERN Core data Nominal mass: 10 kg OIML class: M1 OIML tolerance: 500 mg Cylinder dimensions: 100×185 mm Materials & features Material: stainless steel, fine-turned Shape: knob form Origin: DE GTIN: 4045761008892 Tariff code: 84239090 Note: DAkkS calibration recommended — EG declaration no longer possible from 30 November 2025 FAQ What level of accuracy does this calibration weight provide? The KERN 347-14 is graded OIML class M1 with a declared tolerance of 500 mg, suitable for routine verification and laboratory checks requiring traceable reference masses. Is this weight suitable for frequent handling in a workshop? Yes, the fine-turned stainless steel construction and knob form are designed for frequent use, offering durability and straightforward placement on scales. Can the KERN 347-14 be supplied with official calibration? A DAkkS calibration is recommended for traceable documentation; this weight can be supplied and calibrated according to current metrological practices. Does the weight require special storage or cleaning? Standard care for stainless steel masses applies: keep the surface clean and handle by the knob or with gloves to avoid deposits that could affect measurement. What does the note about EG declaration mean for users? EG declarations for calibration weights are no longer possible from 30 November 2025; obtaining a DAkkS calibration for this mass ensures continued traceability and documented conformity. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
10 kg Precision Test Weight, Button Shape, Polished Stainless Steel, OIML Class E1, 5 mg Tolerance - KERN
High-precision calibration with OIML class E1 accuracy, a practical polished stainless-steel knob and a compact cylindrical design delivers consistent, traceable results. The 10 kg nominal mass with a 5 mg tolerance supports exacting laboratory and calibration tasks. Order the KERN 307-14 directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN 307-14 — 10 kg OIML class E1 calibration weight, polished stainless steel The KERN 307-14 is a single calibration weight designed for high-precision balancing and laboratory calibration, featuring a knob form for secure handling and a polished stainless-steel finish for durability and easy cleaning. OIML class E1 accuracy Nominal mass 10 kg Polished stainless-steel knob Tolerance ±5 mg Consistent traceability for precise calibration results The calibration mass is manufactured to OIML class E1, the standard expected in calibration laboratories where traceability and minimal uncertainty are required. The precise 10 kg nominal mass and the 5 mg tolerance mean fewer repeat measurements and clearer uncertainty budgets when recalibrating analytical and precision balances. Laboratories benefit from reliable test weights that minimise measurement drift and support accreditation demands, turning a single artefact into a stable reference for routine quality assurance. Robust, serviceable design for everyday laboratory handling The weight’s polished stainless steel construction combines corrosion resistance with an easy-to-clean surface, reducing contamination risk in sensitive environments. The knob form provides ergonomic handling and safer placement on pans during calibration cycles, while the compact cylindrical geometry (100×185 mm) fits a wide range of balance pans. These design choices lower handling errors and contribute to longer service life, making the weight a practical investment for busy metrology rooms and calibration services. Simple storage and handling guidance to protect accuracy Correct handling and storage extend calibration intervals and preserve the declared tolerance. Store the mass in a protective case recommended for high-precision weights and handle with gloves or forceps to avoid surface contaminants and mass shifts. Periodic visual inspection for damage or corrosion, combined with scheduled recalibration, keeps the mass within its OIML E1 specification and ensures ongoing confidence in measurement results. For precise laboratory calibration with KERN’s OIML E1 standard, contact Metav Werkzeuge in Emmerich to discuss stock availability and expert advice tailored to calibration requirements. Technical data Article number: 307 SKU: 307-14 GTIN: 4045761002784 Manufacturer: KERN Facts Nominal mass: 10 kg OIML class: E1 Tolerance: 5 mg Cylinder dimensions: 100×185 mm Materials & features Material: polished stainless steel Form: knob Origin: DE Tariff code: 84239090 FAQ What level of accuracy does this weight provide? The KERN 307-14 meets OIML class E1 requirements and offers a declared tolerance of 5 mg, making it suitable for high-precision calibration tasks in accredited laboratories. Which applications suit an OIML E1 10 kg weight? An E1-class 10 kg calibration mass like the KERN 307-14 is appropriate for calibrating precision balances and instruments where minimal measurement uncertainty is essential, including calibration laboratories and quality-control departments. How should the weight be handled to maintain its tolerance? Handle the polished stainless-steel mass by the knob only with clean gloves or suitable tools, store it in a protective case when not in use, and schedule regular recalibration to preserve the declared accuracy of the KERN 307-14. Does the material affect long-term stability? Yes. The polished stainless-steel surface resists corrosion and contamination, helping to maintain mass stability over time when combined with proper handling and storage practices. KERN — Germany
10 kg Precision Weighing Platform 100 mg Readability, Stainless Steel Plate USB Power IoT-Ready - KERN
Take advantage of IoT-ready connectivity and precise 100 mg readability together with a robust stainless steel weighing plate for transparent, efficient process control; order the device directly via Metav Werkzeuge or contact our consultants for integration advice. KERN KDP 10K-4 universal digital weighing platform — 10 kg range, 0.1 g readability KERN KDP 10K-4 is a compact digital weighing platform designed for seamless integration into industrial process chains, offering flexible data transfer and robust daily performance IoT-ready integration for Industry 4.0 10 kg capacity with 100 mg readability Stainless steel weighing plate for durability USB power supply with detachable adapter Fast, measurable integration into production systems The platform is built for immediate digital workflow integration: with IoT-ready design and the KERN Communication Protocol (KCP), measured values can be transmitted as already calibrated digital data directly into control systems. This reduces manual logging and rework, saving time and resources. The combination of a wide 10 kg range and fine 100 mg readability enables reliable process control for batching and quality checks while ensuring compatibility with standard automation tools. Reliable precision that supports quality assurance Using a strain gauge weighing system, the unit achieves a reproducibility of 100 mg and a linearity specification of ±300 mg, which together support consistent measurement results across repeated cycles. The stainless steel weighing plate and a rectangular weighing surface of 160×160 mm provide a durable working area suitable for industrial environments, where repeatable accuracy and material resistance are decisive for traceable quality control and filling applications. Practical operation and robust handling in production environments Powered via USB with a detachable mains adapter, the platform is lightweight at 1.35 kg and features a compact footprint that suits constrained benches. The device includes a pre-tare function for manual deduction of known container weight and a status LED to indicate power status at a glance, simplifying routine tasks such as sample weighing and in-line checks. Operating conditions from 5 °C to 35 °C and up to 80% relative humidity ensure stable performance in typical workshop and plant environments. Centralised data management and software support for traceability The platform is supplied with BalanceConnection software for calibration management, large-format display and direct data export to other applications. Compatibility with EasyTouch facilitates straightforward capture and evaluation of weighing data on tablets or PCs. Note that WLAN and Ethernet interfaces cannot be used simultaneously; nevertheless, the available connectivity options enable flexible network setups and improve overall traceability of measurement results in production documentation. Contact Metav Werkzeuge in Emmerich for tailored integration advice and to request the KERN KDP 10K-4 with its IoT-capable features via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: KDP.10K-4 Manufacturer: KERN SKU: KDP.10K-4 GTIN: 4045761232334 Origin: CN Facts Weighing range: 10 kg Readability: 0.1 g (100 mg) Reproducibility: 100 mg Linearity: ±300 mg Weighing plate (rectangular): 160×160 mm Platform dimensions: 165×165×73 mm Housing dimensions (without removable parts): 165×166×75 mm Weight: 1.35 kg Operating temperature: 5 °C–35 °C Max. relative humidity: 80% Power input: 100 V–240 V, 50/60 Hz Weighing system: strain gauge Special features Material: stainless steel weighing plate USB power supply with detachable mains adapter IoT-ready; KERN Communication Protocol (KCP) for remote control and data retrieval PRE-TARE function for known container weight deduction BalanceConnection software included for PC display and data export Compatible with KERN EasyTouch for simplified data capture WLAN and Ethernet data interfaces not combinable No integrated display; designed for external display or software use FAQ What is the maximum load and smallest readable increment? The KERN KDP 10K-4 provides a weighing range of 10 kg with a readability of 0.1 g (100 mg), suitable for small-batch filling and routine quality checks. Can the platform be integrated into existing automation systems? Yes. The unit supports networked operation via its IoT-ready features and the KERN Communication Protocol (KCP), allowing the KERN KDP 10K-4 to be connected to PCs, tablets and industrial controllers for automated data capture. Is the weighing surface suitable for industrial use? The weighing plate is made from stainless steel and measures 160×160 mm, offering a robust surface for everyday industrial applications that demand durability and easy cleaning. Can WLAN and Ethernet be used at the same time? No. WLAN and Ethernet interfaces are not combinable; select the most appropriate interface for the intended network setup during installation. Which software is included for data handling and calibration? BalanceConnection software is included for calibration management, large-scale display and data transfer; the platform is also compatible with KERN EasyTouch for convenient data capture and analysis. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930
Accurate weighing that keeps production consistent
Scales are measuring instruments that determine the weight, force or count of an object and are essential across workshops and production lines. From precision scales that resolve fractions of a milligram to crane scales that handle several tonnes, the right weighing equipment ensures process reliability, legal compliance and operational efficiency.
How the right scale supports your workflow
Scales convert mechanical or electronic signals into repeatable weight values; external factors such as local gravity, magnetism, air buoyancy and vibration influence the result and often require site-specific adjustment. For legally binding measurements a statutory verification is required, while routine quality assurance is achieved through documented calibration. Choosing the correct combination of measuring range and readability avoids unnecessary sensitivity and stabilises throughput.
Practical advantages you notice every day
- Fast, reproducible results that reduce rework and speed up throughput.
- Better process control through repeatability and consistent stabilisation times.
- Compliance where required: support for statutory verification and DAkkS-accredited calibration services.
- Lower downtime via robust designs for industrial environments and user-friendly tare functions.
- Versatility across applications with options such as precision scales, analytical balances, platform scales, counting scales and checkweighers.
Premium measurement from a trusted partnership
KERN & SOHN represents a long-established premium choice for precise weighing and metrology, offering an extensive range of instruments and accredited services. Metav acts as your procurement and quality filter from Emmerich: decades of expertise, over 48,000 customers and a catalogue of more than 250,000 products ensure reliable supply and consolidated sourcing for industry, trade and crafts.
Key technical data at a glance
- measuring range: from sub-milligram to multiple tonnes
- readability (d): smallest display step, determines sensitivity
- linearity: specification for deviation across the measuring range
- tare: container weight subtraction, essential for net weight determination
- environmental influences: gravity, magnetism, air buoyancy, vibration, temperature, draught
- common types: precision scales, analytical balances, platform scales, counting scales, checkweighers
- verification vs calibration: statutory verification required for legally relevant weighing; calibration for traceable quality assurance
- application areas: laboratory, production, warehouse, shipping, retail, gastronomy
FAQ
What does readability (d) mean for scales?
Readability is the smallest weight increment a scale displays. For precision scales, a smaller readability gives finer resolution but increases sensitivity to draughts and vibration.
What is the difference between accuracy and repeatability?
Accuracy describes how close a measured value is to the true value; repeatability describes how consistently a scale returns the same result under identical conditions. Both matter, but repeatability is often decisive for stable production processes.
When do I need a verified (statutory) scale?
A verified scale is required whenever weight determines legal transactions, for example sales by weight. For internal quality control, a documented calibration is typically sufficient.
Why does my scale show fluctuating values despite correct operation?
Fluctuations are often caused by environmental factors: air draught, nearby vibration, temperature changes or an unstable support. Site selection and appropriate housing or wind protection reduce this effect.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com