High-precision caliper gauges for rapid, repeatable measurements
Specialist caliper gauges and quick-test probes deliver fast, reliable geometry checks in production, incoming inspection and workshop use by mechanically or digitally capturing hard-to-reach features such as deep internal grooves, bore depths, tube wall thicknesses and freeform surfaces. Their spring-loaded lever mechanism ensures a defined contact force for absolutely repeatable results independent of the operator, while ergonomic designs allow one-handed operation with the workpiece remaining in the machine or on the inspection table. Available in a range of contact shapes and probe arm geometries, these precision calipers include analogue dial options for robust continuous use and digital models with tolerance signalling and data interfaces for seamless integration into quality control systems.
250-450mm Internal Precision Bore Gauge Colour Touchscreen Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high measurement accuracy and seamless data transfer to cut inspection time and reduce rework; the instrument is delivered fully calibrated to ISO 17025 standards with certificate included. Order the unit directly via Metav Werkzeuge or ask our consultants for application advice. Microtech Internal Fine Bore Gauge (250–450 mm) with 1.5" Colour Touchscreen A digital internal fine bore gauge designed for precise inside-diameter measurement of medium-sized components in workshop and laboratory settings. Wireless and USB data output Measuring range 250–450 mm 1.5" colour touchscreen display Supplied with ISO 17025 calibration Precision performance for reliable decision-making The gauge delivers a combination of repeatability and traceable calibration that supports production control and final inspection. With a measuring range categorised in the medium class (max. 450 mm), this device bridges bench-top convenience and the reach required for larger assemblies. The stated accuracy of 0.017 and a display resolution of 0.0001 mm enable operators to detect deviations that would otherwise lead to costly rework. Such quantifiable performance translates into measurable savings in scrap reduction and faster first-pass yield for serial production. Efficient digital workflows to speed up inspection Equipped with both wireless and USB outputs and a clear 1.5" colour touchscreen, the instrument simplifies data capture and documentation. Measured values can be transferred directly into quality-control systems or logged for statistical process control, removing manual transcription errors and improving traceability. The compact digital interface and two-module design allow straightforward integration into existing metrology setups, increasing throughput without a steep learning curve. Built for routine use in demanding environments Constructed for regular shop-floor use while satisfying laboratory requirements, the instrument combines ergonomic handling with robust electronics. The medium measuring class makes it suitable for components such as housings, bearings and medium-sized bores where balance between stiffness and reach is essential. Delivered fully calibrated to ISO 17025, the device arrives ready for immediate, certified use in regulated environments, which supports compliance and audit readiness. Contact Metav Werkzeuge in Emmerich for tailored advice or to secure units for your inspection line — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 131450745 GTIN: 4061905046780 Manufacturer: Microtech Metrology Category: Feinmessgeräte Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Facts Measuring range: 250–450 mm Accuracy: 0.017 Display resolution: 0.0001 Measuring depth: 3000 Modules: 2 SKU: 131450745 Special features Delivered calibrated to ISO 17025 with certificate Digital instrument for internal diameter measurement Suitable for workshop and laboratory use Wireless and USB connectivity Compact colour touchscreen interface FAQ What measuring range does the gauge cover? The instrument covers a measuring range from 250 to 450 mm, making it suitable for medium‑sized internal diameters. Is the gauge delivered ready to use with a calibration certificate? Yes, the Microtech Internal Fine Bore Gauge is supplied fully calibrated to ISO 17025 and includes the calibration certificate. How are measured values exported from the device? Measured results can be exported wirelessly or via USB for direct logging into quality systems or PC software. What display and user interface does the device use? The device features a 1.5" colour touchscreen that presents clear numeric readouts and basic menu navigation for setting modes and zero points. For which applications is this instrument primarily intended? The instrument is intended for precise internal diameter checks on components such as housings, bearings and machined assemblies where medium-range, repeatable measurements are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Precision Gauge Depth 1000mm Readout 0.01mm Repeatability 0.02mm Plastic Case - Metav IndustryLine
Take advantage of precise inside measurement, deep reach and robust workshop handling to speed up bore inspection and secure reproducible results; order the instrument directly via Metav Werkzeuge or consult the sales team for specification matching. M208.429 Internal precision dial gauge — 250–450 mm range, 0.01 mm reading The M208.429 is an internal precision gauge designed for bore and cavity inspection with a measuring depth of 1,000 mm and robust analogue indication for reliable shop‑floor use. High‑resolution 0.01 mm reading Measuring range 250–450 mm Measuring depth 1,000 mm Repeatability 0.02 mm Delivered in protective transport case Precise inside measurement that speeds up inspection The instrument delivers high‑resolution 0.01 mm indication on an analogue dial, combining familiar mechanical operation with a fine reading that supports quick decisions during production checks. With a documented repeatability of 0.02 mm, the device gives a predictable uncertainty band for routine quality control tasks. The mechanical dial format removes dependence on batteries and simplifies long‑term maintenance, while clear graduations help operators reduce interpretation time and thus increase throughput without compromising measurement reliability. Deep reach and workshop suitability for medium‑sized components With a measuring range of 250–450 mm, this tool falls into the medium category for inside measuring instruments, offering the optimal balance of reach and rigidity for components such as housings, bearing seats and medium‑sized assemblies. The 1,000 mm measuring depth and supplied extension options (50 mm and 100 mm) enable checks deep inside bores or long recesses. Five Ø8 mm measuring studs and the set of pass gauges (0.5, 1, 2, 3 and 6 × Ø11 mm) provide adaptability for a variety of bore diameters, while the matt chrome‑plated device holder contributes to corrosion resistance and everyday robustness in a busy workshop. Practical configuration and benefits for production environments The construction and accessory set are tailored for repeatable in‑process checks: lightweight assembly (approximately 1.4 kg) eases handling, the analogue design minimises service complexities, and the unit is supplied in a protective transport case for secure storage and movement between inspection stations. As a member of the dial indicator family, the instrument integrates simply into existing inspection routines and fixtures. The combination of measurable repeatability, extension capability and transport protection reduces downtime and supports consistent results across shifts — a practical choice for machine shops and inspection departments aiming to keep throughput high and rework low. For specification advice or to secure the Metav IndustryLine internal gauge with 250–450 mm range and 1,000 mm measuring depth, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and compatibility with existing fixtures Technical data Article number: M208.429 GTIN: 4061905044335 Category: Dial indicators Weight: 1.4 kg Facts Measuring range: 250–450 mm Measuring depth: 1,000 mm Resolution / reading: 0.01 mm Repeatability: 0.02 mm Measuring studs: 5 × Ø8 mm Extensions: 50 mm + 100 mm Pass gauges: 0.5, 1, 2, 3, 6 × Ø11 mm Special features Analogue dial indication Matt chrome‑plated device holder Delivered in protective transport case (plastic or wooden) Medium range classification (300–500 mm category) Suitable for bore and cavity inspection in production environments FAQ What types of measurements can be performed with this instrument? The instrument supports internal bore and cavity checks, depth and step measurements typical for dial indicator based inside gauges; the supplied studs and pass gauges extend its applicability. Is the M208.429 suitable for workshop use on larger assemblies? Yes. With a 250–450 mm measuring range and 1,000 mm measuring depth, the gauge is intended for medium‑sized components and offers the reach and stiffness expected in machining and fixture inspection. How reproducible are the readings in routine use? The instrument specifies a repeatability of 0.02 mm, which provides a reliable basis for in‑process control and routine acceptance testing. What accessories are included for adapting the gauge to different bores? The delivery includes five Ø8 mm measuring studs, pass gauges (0.5, 1, 2, 3, 6 × Ø11 mm) and extension options of 50 mm and 100 mm for extended reach. Does the device require batteries or electronic calibration? This is an analogue dial instrument and does not require batteries; calibration procedures depend on local quality processes and any supplied calibration documents. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250-450mm Internal Precision Gauge Depth 500mm Readout 0.01mm, Extra-Long Rod, Repeatability 0.02mm - Metav IndustryLine
Take advantage of the combination of precise 0.01 mm resolution, a generous 500 mm measuring depth and dependable 0.02 mm repeatability for reliable internal measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Internal fine measuring instrument 250–450 mm — analogue dial, 500 mm depth (Metav IndustryLine) The Internal fine measuring instrument 250–450 mm is an analogue gauge system designed for accurate internal diameter and bore measurements in machine construction and quality control. Measuring range 250–450 mm 500 mm measuring depth 0.01 mm resolution Repeatability 0.02 mm Consistent precision for internal bores This analogue gauge is built for repeatable, workshop-ready precision: the 0.01 mm resolution combined with a tested 0.02 mm repeatability makes it suitable for routine quality checks where consistent results matter. The dial readout is immediate and readable in typical shop lighting, reducing interpretation errors compared with less legible instruments. The extended measuring depth permits access to recessed features, so larger internal diameters can be assessed without multiple setups, improving throughput in production and inspection tasks. Solid construction and practical handling A matt chrome-plated device holder ensures robust corrosion resistance and a stable fixture for the gauge assembly, while a modest weight of 1.4 kg keeps the unit manageable for single-person operation. The tool includes measuring pins 5 x Ø8 mm and a set of gauge discs for secure seating; extensions (50 mm, 100 mm) are available to adapt the base range when deeper reach is required. These mechanical design choices prioritise stiffness and repeatability, which helps to limit measurement uncertainty arising from flexing or misalignment during use. Designed for typical workshop and production tasks Engineered for applications such as internal diameter checks, bore alignment and fixture verification, this internal gauge supports fast inspection cycles in machine shops and toolrooms. The combination of a wide measuring range 250–450 mm and 500 mm measuring depth reduces the need for frequent repositioning, accelerating part throughput. The analogue format suits environments where durability and immediate visual feedback are preferred over digital integration, while retaining industrial-grade accuracy for standard quality control. Confidence through proven supply and service Sourcing from Metav IndustryLine brings the practical advantage of a European distribution hub with long-standing experience in metrology: centralised stock, technical know-how and a large product portfolio help simplify procurement and reduce delivery risks. Metav’s role as a quality filter for the European market means reliable availability and advice tailored to workshop requirements, supporting efficient implementation of precise measuring solutions on the shop floor. Contact Metav Werkzeuge in Emmerich for application recommendations or to arrange a technical consultation about the Metav IndustryLine internal fine measuring instrument M208.426 — tailored advice and reliable delivery from our European centre. Technical data Article number: M208.426 GTIN: 4061905044328 Category: Dial gauges Facts Measuring range: 250–450 mm Measuring depth: 500 mm Resolution: 0.01 mm Repeatability: 0.02 mm Weight: 1.4 kg Special features Analogue dial readout Device holder matt chrome-plated Measuring pins: 5 x Ø8 mm Gauge discs: 0.5 / 1 / 2 / 3 / 6 x Ø11 Extensions available: 50 mm, 100 mm FAQ What internal sizes can be checked with this instrument? The internal fine measuring instrument 250–450 mm from Metav IndustryLine covers diameters within the 250–450 mm range; with the supplied 500 mm measuring depth it can reach recessed bores within that span (SKU M208.426). Is the readout fine enough for routine quality control? Yes — the analogue dial offers 0.01 mm resolution and 0.02 mm repeatability, values that support standard machine‑shop inspection and process control. Can the range be extended for deeper measurements? Yes — extensions of 50 mm and 100 mm are available to reach greater depths while retaining the same measuring principles. What materials and accessories are included or fitted? The instrument features a matt chrome-plated device holder, comes with 5 x Ø8 mm measuring pins and a set of gauge discs (0.5 / 1 / 2 / 3 / 6 x Ø11); further accessories can be supplied on request. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250-450mm Internal Precision Gauge With Carbide Faces, 0.01mm Resolution - Microtech Metrology
Take advantage of the combination of high resolution, robust carbide measuring faces and a wide measuring range for dependable in-line bore checks and repeatable quality control. Order supply through Metav Werkzeuge or consult the specialists at Metav for application advice and delivery options. Internal dial bore gauge by Microtech Metrology — analogue gauge, 250–450 mm range, carbide faces The Internal dial bore gauge is an analogue instrument for precise internal diameter checks in machine shops and inspection benches Carbide measuring faces for long service life Analogue dial with 0.01 mm graduation Measuring range 250–450 mm for medium bores High-resolution measurement for dependable process control The instrument delivers a 0.01 mm dial graduation and a stated accuracy of ±0.022 mm, combining readable resolution with the repeatability needed for workshop quality assurance. Designed for verification rather than rough positioning, the gauge covers a measuring range of 250–450 mm, which places it in the medium-range class suitable for components such as housings, sleeves and larger bearing seats. The analogue dial provides an immediate visual readout and allows quick comparative checks against master gauges or ring standards, supporting fast decision making on the shop floor while maintaining traceable measurement data. Built to resist wear and retain calibration over time Contact areas are fitted with carbide measuring faces, chosen to minimise wear when measuring common ferrous and non-ferrous materials. This hard-wearing surface preserves the instrument geometry under frequent use and reduces the need for frequent replacement of measuring tips. A generous measuring depth of 2000 mm extends the application to deeper bores and recesses while the mechanical design focuses on stability and low hysteresis, so measurements remain repeatable and reliable across production runs. Where surface conditions vary, the carbide tips help maintain a consistent contact behaviour and thus more stable results. Practical use in production and inspection workflows Assembly and inspection teams benefit from an intuitive mechanical operation that integrates into standard workflows: rapid comparison using a dial gauge, easy reference to master parts, and straightforward handling on a bench or in a fixture. The instrument is supplied under the Microtech Metrology designation and is identified as SKU 132450144, making it simple to reference in procurement and quality documentation. For shops prioritising clear pass/fail decisions, this analogue bore gauge provides a direct, low-latency measurement signal ideal for go/no-go checks and interim control points within a production line. For reliable dimensional control select the Microtech Metrology internal dial bore gauge and contact Metav Werkzeuge in Emmerich for tailored advice, availability and order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 132450144 GTIN: 4061905454011 Manufacturer: Microtech Metrology Facts Measuring range: 250–450 mm Measuring depth: 2000 mm Resolution (dial): 0.01 mm Stated accuracy: ±0.022 mm Analogue instrument Special features Carbide measuring faces Suitable for internal diameter measurement Analogue dial bore gauge design FAQ What measurement range does this gauge cover? The gauge covers a measuring range of 250–450 mm, making it suitable for medium-sized bores and internal diameters. What resolution and accuracy can be expected? The dial provides a 0.01 mm graduation and the instrument has a stated accuracy of ±0.022 mm, appropriate for workshop quality control and comparative checks. Are the measuring faces durable for frequent use? Yes, the instrument is supplied with carbide measuring faces, which resist wear and help maintain measurement consistency over extended use. Can the gauge measure deep bores? The design includes a measuring depth of 2000 mm, enabling checks in deeper recesses and extended internal features. How is the instrument identified for ordering or documentation? The product is listed under SKU 132450144 and by the Microtech Metrology designation for clear procurement and traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Precision Gauge With Retractable Probe, Colour Touchscreen, ISO 17025 Calibration - Microtech Metrology
Take advantage of the combination of traceable ISO 17025 calibration, robust wireless data transfer and a retractable measuring head for reliable internal measurements in medium‑range components; order directly via Metav Werkzeuge or consult our advisors for application support. Internal Precision Bore Gauge — 1.5" Colour Touchscreen, Wireless+USB (Microtech Metrology) The Internal Precision Bore Gauge is a digital measuring instrument for precise internal diameter checks in production and inspection, optimised for the 250–450 mm measuring range and equipped with a retractable measuring head Colour 1.5" touchscreen display Wireless+USB data output ISO 17025 calibrated with certificate Retractable measuring head design High‑accuracy measurement with certified traceability The instrument delivers shop‑floor compatible precision with an indicated accuracy of ±0.03 mm, backed by an ISO 17025 calibration certificate supplied with the gauge. This certification ensures measurement results can be traced and accepted in quality control processes, reducing the need for repeat checks and supporting documented compliance in incoming inspection and assembly control. The resolution at the display is 0.0001 mm, enabling fine indication steps for close‑tolerance work. Seamless data flow to improve inspection throughput Integrated Wireless+USB outputs allow measured values to be exported directly to SPC systems or a PC without manual transcription, reducing error and accelerating documentation. The 1.5" colour touchscreen provides clear readouts and intuitive operation, while automated data transfer supports reproducible logging of batch measurements—benefits that translate into measurable time savings and fewer documentation discrepancies during series inspections. Designed for medium‑range internal workpieces and ease of handling With a measuring range of 250–450 mm, this device sits in the medium category for internal gauging, making it suitable for fixture work, housings and larger bore series in tool and mould construction. The retractable measuring head simplifies insertion into bores and reduces the risk of damage during positioning, improving handling for single‑operator routines and repetitive checks without compromising rigidity. Practical accessory package and workshop durability Delivery includes a support set for everyday use and mounting, supporting quick setup and interchange in inspection cells. The gauge is constructed for robust workshop use and its ergonomic control layout reduces operating fatigue during repetitive tasks. The combination of certified calibration, secure data output and protective design supports reliable integration into both manual and semi‑automated measuring stations. For traceable internal measurements and expert purchasing advice, contact Metav Werkzeuge in Emmerich — Metav Werkzeuge GmbH is available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with orders and technical clarification Technical Data Article number: 131450750 GTIN: 4061905044090 Brand: Microtech Metrology Display: Colour 1.5" touchscreen Data output: Wireless+USB Delivered with: Support set Calibration: ISO 17025 certificate included Facts Measuring range: 250–450 mm Measuring depth: 5000 Accuracy: ±0.03 mm Resolution/readout: 0.0001 mm Modules: 3 Special features Retractable measuring head Digital instrument for internal diameters Designed for medium‑range components Supplied calibrated to ISO 17025 FAQ What is the measurement range of the gauge? The gauge covers a measuring range of 250–450 mm, making it suitable for medium‑sized internal diameters. Is the instrument supplied calibrated? Yes, the device is delivered fully ISO 17025 calibrated and includes a calibration certificate for traceable quality assurance. How can measured values be exported? Measured values can be transferred via Wireless+USB interfaces for direct capture into SPC or inspection software. What precision can be expected during routine measurements? The instrument specifies an accuracy of ±0.03 mm with a display resolution of 0.0001 mm, suitable for workshop‑level quality control. Does the delivery include accessories for setup? Delivery includes a support set to assist with mounting and operational readiness in inspection workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Precision Measuring Device Carbide Measuring Faces, 0.008mm Resolution - Microtech Metrology
Take advantage of high-resolution measurement and carbide contact faces to secure reproducible internal measurements across medium-sized components; the instrument’s 250–450 mm range and stated 0.008 mm accuracy support reliable in-process checks. Order supply via Metav Werkzeuge or request technical advice from our consultants for application-specific integration. Internal Precision Gauge — Microtech Metrology · 250–450 mm, carbide faces Internal Precision Gauge designed for precise internal measurements in tooling, mould and fixture work, combining fine resolution with robust contact faces Carbide measuring faces for durable contact Measuring range 250–450 mm for medium components Resolution 0.001 mm for fine detection Accuracy ±0.008 mm for reliable control Robust mid-range measurement for workshop quality control This measuring instrument is optimised for medium-range internal measurement tasks, its maximum span placing it in the mid category for internal gauges. With a declared accuracy of ±0.008 mm and a reading resolution of 0.001 mm, the instrument is suitable where repeatable tolerances are required on housings, bores and assemblies. The specification supports efficient statistical process control and reduces the need for time-consuming secondary checks, which translates directly into improved throughput for production lines. Durable contact surfaces and finest detectable variations The device is equipped with carbide measuring faces, giving a wear‑resistant contact that preserves measurement geometry under frequent use. The analogue dial mechanism provides a tactile, immediate indication with very fine graduation, making small deviations plainly visible during setup and run-off checks. This combination of hard contact material and fine indication ensures repeatable results over long production runs, limiting rework and promoting consistent quality even where operators of different experience levels perform the checks. Practical handling and integration into inspection routines Designed for workshop conditions, the gauge balances reach and stiffness for stable placement across the 250–450 mm span while the extended measuring depth supports checks on deeper bores and stepped components. The instrument’s familiar dial reading and rugged construction speed up daily inspection tasks and make it straightforward to train personnel. For procurement and integration, Metav’s technical team can advise on how this instrument complements existing inspection routines and fixtures to support traceable quality assurance in the shop floor environment. Discuss application fit and procurement with Metav Werkzeuge for assistance in choosing the correct setup and accessories for Microtech instruments. Technical Data Article number: 132450822 GTIN: 4061905453922 Brand: Microtech Metrology Facts Measuring range: 250–450 mm Measuring depth: 1000 mm Resolution (reading): 0.001 mm Stated accuracy: 0.008 mm Display type: analogue dial Special features Carbide measuring faces (hardmetal) Suitable for medium-range internal measurements (Mittel category) Mechanically robust design for workshop use Category: Fine measuring instruments FAQ What measurement range is covered by this instrument? The instrument covers a measuring range of 250–450 mm; the specification places it in the mid‑range category suitable for medium‑sized internal components. How precise is the reading and what does the accuracy mean? Resolution is 0.001 mm with a stated accuracy of 0.008 mm; this means the gauge indicates fine increments while reproducibility is within eight micrometres under normal measurement conditions with consistent technique. Are the contact faces suitable for heavy use? Yes, the gauge features carbide measuring faces that maintain contact geometry and resist wear, helping the instrument retain its measurement characteristics during regular workshop use. Is the instrument suitable for deep-bore checks? The stated measuring depth of 1000 mm supports checks on relatively deep bores and stepped internal geometries; for specific fixturing or support recommendations refer to the installation guidance. Which SKU should be referenced when ordering or enquiring? Please refer to SKU 132450822 (Microtech Metrology internal precision gauge) when contacting sales or ordering to ensure the correct item is supplied. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Precision Measuring Device Retractable Probe, Colour Touchscreen, ISO 17025 Calibration - Microtech Metrology
Take advantage of retractable probe design, reliable Wireless + USB data transfer and full traceability through ISO 17025 calibration for consistent shop-floor quality; order this internal precision instrument directly via Metav Werkzeuge or ask our consultants if needed. Internal precision gauge — retractable probe, Wireless + USB by Microtech Metrology The internal precision gauge is a digital measuring instrument for internal diameters from 250 mm to 450 mm, combining a retractable measuring probe and integrated microcomputer for rapid, traceable measurements in fixture, mould and component inspection. Retractable measuring head for confined bores Wireless and USB data transfer Colour 1.54" touchscreen interface ISO 17025 calibration certificate included Maximum repeatability for medium-range internal measurement Built for medium-range internal tasks, this instrument delivers 0.012 mm accuracy with a fine resolution of 0.0001 mm, providing a dependable basis for acceptance tests and in-process checks. The combination of a retractable probe and a compact microcomputer reduces handling time when measuring internal diameters, while the instrument’s design maintains stiffness across the specified span. These characteristics translate directly into fewer reworks and improved first-pass yield in production and quality laboratories. Improved workflow through intuitive control and open data transfer The onboard Colour 1.54" touchscreen and menu-driven interface simplify setup and repeat measurements, making the device straightforward to operate by trained technicians and quality engineers alike. Data export via Wireless and USB supports immediate logging into inspection software or a networked database, enabling digital records without manual transcription. This streamlined data path reduces administrative overhead and supports statistical process control routines and traceable documentation. Robust calibration and shop-floor suitability With a measuring depth of 150 mm and a measurement range tailored to medium components, the instrument is suited to toolrooms and assembly inspection benches where reproducible internal measurements are required. The gauge is delivered fully calibrated to ISO 17025, complete with a calibration certificate, ensuring metrological traceability and acceptance in accredited quality systems. The ruggedised construction and clear digital readout preserve measurement integrity under typical workshop conditions while supporting reliable integration into formal quality processes. Contact Metav Werkzeuge to request a detailed specification sheet, the ISO 17025 calibration certificate and integration options for this Microtech Metrology internal precision gauge Technical Data Article number: 139450700 GTIN: 4061905045653 Manufacturer: Microtech Metrology Category: Fine measuring instruments Facts Accuracy: 0.012 mm Resolution: 0.0001 mm Measuring range: 250–450 mm Measuring depth: 150 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Special features Retractable measuring head Integrated microcomputer Digital measurement instrument Delivered calibrated to ISO 17025 with certificate Medium class measurement range (300–500 mm bracket suitability) FAQ What measuring range does this instrument cover? The internal precision gauge measures internal diameters from 250 mm to 450 mm, making it suitable for medium-range components and assemblies. How accurate is the instrument and what resolution does it offer? The device provides an accuracy of 0.012 mm with a resolution of 0.0001 mm, values that support consistent quality control and traceable measurements. Is the instrument supplied calibrated? Yes. The Microtech Metrology instrument is supplied fully calibrated to ISO 17025 and includes an official calibration certificate for documentation and audit purposes. Which data transfer options are available for results logging? Measurement results can be exported via Wireless and USB, enabling integration into inspection software or direct transfer to a PC for analysis and archiving. For which workshop tasks is this instrument most suitable? This instrument is designed for internal measurements in fixture and mould making, machine assembly inspection and quality laboratories where medium-range, reproducible internal dimension control is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Precision Measuring Instrument With Retractable Probe, Colour Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Benefit from 0.02 mm accuracy combined with Wireless+USB data output and an ISO 17025 calibration certificate for traceable, production-ready internal measurements. Order the Internal Fine Measuring Instrument directly via Metav Werkzeuge or consult Metav's specialists for system integration and calibration advice. Internal Fine Measuring Instrument — digital internal gauge, 250–450 mm range, 0.02 mm accuracy (Microtech Metrology) The Internal Fine Measuring Instrument is a digital internal gauge designed for precise inside-diameter and depth measurements in machining, metrology and quality control environments. Digital readout with 1.54" colour touchscreen Wireless and USB data output for easy integration Measuring range 250–450 mm with 0.02 mm accuracy Delivered calibrated to ISO 17025 with certificate High-precision measurement where it matters This digital internal gauge combines a 0.02 mm accuracy with a fine reading step of 0.0001 mm, delivering reproducible results for routine quality checks and sample inspections. The instrument's electronics and measurement chain are optimised for internal dimensions, so measured values remain stable even when operations are repeated on a production line. The ISO 17025 calibration and accompanying certificate ensure traceability and reduce auditing effort, supporting documented quality procedures and supplier qualification. Integrates into production and inspection workflows Equipped with Wireless and USB data output and a 1.54" colour touchscreen, the device simplifies data capture and transfer to inspection software or SPC systems. The touchscreen offers direct, clear readback on the shop floor, while digital output reduces transcription errors and speeds up reporting. This combination increases throughput and lowers the administrative burden in the inspection loop, making the gauge suitable for both standalone checks and semi‑automated metrology stations. Suited to medium-range internal measurements and deep bores With a measuring range of 250–450 mm and a measuring depth capability up to 1000 mm, the gauge fits the "medium" class of internal instruments: long enough for sizable components yet still manageable by workshop staff. Its form factor and measured depth capability make it appropriate for inspection of housings, sleeves and assemblies where internal diameters and stepped features must be verified. Robust construction and a digital control system help maintain measurement integrity across longer probing depths. Contact Metav Werkzeuge to arrange delivery of the ISO 17025‑calibrated unit and to discuss integration options for production or laboratory setups Technical data Article number: 139450711 GTIN: 4061905046100 Manufacturer: Microtech Metrology ECLASS: 21170310 Digital display: Colour 1.54" touchscreen Data output: Wireless, USB Facts Accuracy: 0.02 mm Reading step: 0.0001 mm Measuring range: 250–450 mm Measuring depth: 1000 mm Digital: Yes ISO 17025: Calibrated with certificate Special features Digital internal fine measuring instrument Delivered calibrated to ISO 17025 with certificate Wireless + USB connectivity Colour touchscreen interface Suitable for machining and quality control FAQ What measuring range does the instrument cover? The instrument covers an internal measuring range of 250–450 mm and supports measuring depths up to 1000 mm for deeper bores and stepped features. Is the device delivered calibrated? Yes, the Internal Fine Measuring Instrument is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceable documentation. How does data transfer work with production systems? Data transfer is provided via Wireless and USB outputs; the gauge sends digital readings directly to inspection software or SPC systems, reducing manual transcription. What accuracy and resolution can be expected? The instrument specifies an accuracy of 0.02 mm with a reading step of 0.0001 mm, combining practical repeatability with fine display resolution for clear decision making. Which applications is this gauge best suited for? The gauge is intended for medium-range internal measurements in machining, assembly and quality control—ideal for housings, sleeves and components requiring repeatable inside‑diameter checks. Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-550mm Internal Precision Depth Gauge Digital Readout, 0.001mm Resolution, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceable calibration, a 250–550 mm measuring range and a fine 0.001 mm display resolution to secure consistent internal measurements on medium‑large components; order via Metav Werkzeuge or consult our experts for application advice. Internal fine measuring instrument — digital internal gauge, 250–550 mm, Microtech Metrology The Internal fine measuring instrument is a digital internal gauge designed for precise diameter and bore measurements in workshop and production environments, offering a wide working depth and a robust measuring span for medium‑format components. Digital readout 0.001 mm resolution Measuring range 250–550 mm Supplied calibrated to ISO 17025 Reliable measurement for medium‑large internal diameters This instrument addresses the regular need to inspect medium‑sized bores with a measuring range of 250–550 mm, classifying it among long‑bar instruments where stiffness and repeatability matter. The combination of a substantial measuring depth (380 mm) and a guarded retractable measuring head reduces deflection and protects the probe during use, which in turn keeps measurement scatter low. With a display resolution of 0.001 mm, the readout supports fine decision making on tolerances, while the stated measurement accuracy of 0.025 mm defines the usable uncertainty for pass/fail assessments in everyday quality control. Traceable calibration for audit‑ready inspection Delivered fully calibrated to ISO 17025, this gauge includes a calibration certificate that documents measurement traceability and parameters. The certificate supports supplier audits and internal quality records, demonstrating that the device was adjusted and verified under accredited conditions. Understanding the difference between display resolution and measurement uncertainty is important: although the display shows 0.001 mm steps, the verified accuracy of 0.025 mm should be used when calculating measurement uncertainty for statistical process control or inspection plans. High‑resolution digital readout for decisive verdicts The clear digital readout simplifies reading small deviations and accelerates inspection cycles compared with analogue alternatives. Data clarity reduces interpretation errors and shortens handover time between operators. The digital format supports rapid comparison against nominal values and enables consistent documentation of results on inspection sheets. The instrument’s robust construction and precise mechanics mean repeatability across sequences of measurements, helping to prevent rework and maintain stable process capability. Practical handling that fits the workshop workflow Designed for ease of use, the retractable measuring head and ergonomic control layout make in‑field checks straightforward, even when access is limited. The unit is suited for routine quality checks, first‑off inspections and setup verification where medium‑scale internal dimensions must be confirmed quickly and reliably. Integration into existing measurement routines is straightforward — documentation from the supplied ISO 17025 calibration and the instrument’s clear specification help to harmonise results across shifts and locations, supporting a consistent quality culture on the shop floor. For an inspection tool that combines accredited calibration and a practical 250–550 mm range, request the Microtech Metrology internal fine measuring instrument via Metav Werkzeuge — our Emmerich office will advise on suitability, delivery and integration with existing workflows. Technical data Article number: 139550800 GTIN: 4061905454240 Manufacturer: Microtech Metrology Facts Measuring range: 250–550 mm Measuring depth: 380 mm Display resolution: 0.001 mm Accuracy: 0.025 mm Digital: yes Special features Supplied calibrated to ISO 17025; calibration certificate included Retractable measuring head for protected probe handling Category: Fine measuring instruments eClass: 21170310 FAQ What measuring range does the Internal fine measuring instrument cover? The Internal fine measuring instrument covers a 250–550 mm range, making it suitable for medium‑format bores and internal diameters in production environments. Is the instrument supplied with an accredited calibration certificate? Yes, the Internal fine measuring instrument from Microtech Metrology is delivered calibrated to ISO 17025 and includes a calibration certificate for traceability and audit purposes. What resolution and accuracy can be expected from the device? The display resolution is 0.001 mm while the validated measurement accuracy is 0.025 mm, figures that should be used for tolerance decisions and uncertainty budgets for the Microtech Metrology internal fine measuring instrument (SKU 139550800). How deep can measurements be taken with this gauge? The instrument supports a measuring depth of 380 mm, allowing inspection of recessed features and deeper bores without auxiliary extensions. What workshop tasks is this instrument best suited to? Designed for routine inspection, first‑article checks and setup verification, the Internal fine measuring instrument is ideal for quality control of medium‑sized components, fixtures and moulded parts where documented, repeatable internal measurements are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-550mm Internal Precision Gauge With Retractable Probe, Colour Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a large measuring range and certified traceability for reliable internal inspections; combine ISO 17025 calibration with wireless data transfer and precise 0.02 mm repeatability. Order the internal precision measuring instrument directly via Metav Werkzeuge or ask our consultants if needed. Internal Precision Measuring Instrument — 250–550 mm, 0.02 mm accuracy (Microtech Metrology) The Internal Precision Measuring Instrument is a digital gauge designed for internal bore and cavity measurements in heavy machining and component fabrication. Wireless + USB data output for process integration ISO 17025 calibrated with certificate included 0.02 mm accuracy for dependable quality control Colour 1.54" touchscreen for fast reading Certified precision for traceable measurement results The instrument is delivered fully calibrated to ISO 17025, with a calibration certificate included, ensuring traceability to recognised laboratory standards. With a stated accuracy of 0.02 mm and a display resolution down to 0.0001 mm, the device supports documented inspection routines and audit requirements in quality departments. This certified performance reduces doubt over measurement validity and simplifies acceptance in regulated production environments. Designed for large internal measurements and deep access With a measuring range 250–550 mm and a measuring depth 380 mm, the gauge is intended for larger internal bores and assemblies typical in heavy machining, pipework and housing manufacture. The geometry and reach make it suitable where standard short-reach tools lack span, while maintaining the stiffness necessary for repeatable readings across the full range. This combination of reach and rigidity supports consistent results on larger workpieces without resorting to improvised setups. Digital connectivity that speeds inspection workflows Equipped with Wireless+USB data output and a Colour 1.54" touchscreen, the device simplifies transfer of measured values into inspection software and statistical process control systems. Wireless transfer reduces manual transcription and the associated error risk; USB provides a reliable wired option for secure data capture. The touchscreen display offers clear, fast readouts and basic in‑device functions, supporting efficient sampling routines at the bench or in the workshop. Robust operation for routine workshop and inspection use Engineered for daily use in industrial environments, the instrument pairs a digital microcomputer with a user-focused interface for straightforward measurement cycles. The construction supports regular handling in production and inspection rooms, while the calibration documentation and stable numerical accuracy make it a practical tool for incoming inspection, in‑process checks and final verification. Integration-ready outputs and certified accuracy help embed the gauge into existing quality procedures with minimal adjustment. Contact Metav Werkzeuge today to discuss how Microtech Metrology's ISO 17025‑calibrated internal precision measuring instrument can be integrated into existing QC processes—Metav Werkzeuge is available for technical advice and ordering from Emmerich. Technical data SKU: 139550700 GTIN: 4061905452864 Brand: Microtech Metrology Display: Colour 1.54" touchscreen Data output: Wireless + USB Facts Measuring range: 250–550 mm Measuring depth: 380 mm Accuracy: 0.02 mm Resolution: 0.0001 mm Digital: yes Special features Delivered with ISO 17025 calibration certificate Suitable for large internal bores and assemblies Designed for workshop and inspection-room use Integration-ready data transfer for SPC systems FAQ What accuracy can be expected from this internal gauge? The internal precision measuring instrument (Microtech Metrology, SKU 139550700) offers an accuracy of 0.02 mm, suitable for standard industrial quality control across the specified range. Is the device supplied calibrated and traceable? Yes — the instrument is supplied calibrated to ISO 17025 and includes a calibration certificate, ensuring traceability for audit and conformity purposes. How are measured values exported for documentation? Measured values can be exported via Wireless+USB. The Microtech Metrology unit supports wireless transfer for fast capture and USB for direct, secure data logging. Which component sizes is the gauge intended for? With a measuring range of 250–550 mm and a measuring depth of 380 mm, it is intended for larger internal bores and assemblies typically found in heavy machining and pipe or housing fabrication. Can this instrument be used on the shop floor for routine checks? Yes — the device is designed for routine workshop and inspection use, combining robust construction, a colour touchscreen and certified accuracy for repeatable in‑process and final inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
26.6mm Internal Bore Gauge Digital Color Touchscreen Wireless+USB, 0.0001mm Resolution - Microtech Metrology
Take advantage of the combination of ultra-fine resolution, extended measuring reach and seamless data transfer to speed up inspection cycles while maintaining traceability. Order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Internal Precision Gauge by Microtech Metrology — 26.2–26.6 mm range, 760 mm depth The Internal Precision Gauge is a digital instrument for high-precision internal diameter inspection of small-bore components, designed for use in precision engineering and deep-bore quality control. High-resolution 0.0001 mm display Colour 1.54" touchscreen interface Wireless and USB data output 26.2–26.6 mm range, 760 mm measuring depth Exceptional measurement performance for small-bore work The instrument delivers a metrological resolution of 0.0001 mm (0.1 µm), enabling fine discrimination during internal-diameter checks where tight tolerances matter. With a nominal measurement range of 26.2–26.6 mm, this device falls into the micro class of gauges that are optimised for extremely compact components. Such resolution supports reliable assessment of bore form and size without resorting to more time-consuming alternative methods, reducing inspection time while preserving measurement integrity. Streamlined data capture and traceability for production workflows Equipped with a Colour 1.54" touchscreen, the measuring system simplifies parameter entry and readout interpretation on the shop floor. Measured values can be exported via Wireless+USB, allowing direct transfer into quality documentation or statistical software and eliminating manual transcription errors. This connectivity improves process control and supports batch traceability, making the instrument suitable for integration into modern inspection routines where data continuity is required. Deep-bore capability for specialised internal inspections A measuring depth of 760 mm extends the device’s applicability beyond short bores to long internal passages such as precision tubes and small-calibre barrels, without compromising handling. The slender probe geometry and extended reach enable single-point access deep inside components, reducing the need for disassembly or multiple measuring steps. This design focus reduces handling time for long parts and helps maintain alignment during measurement, which in turn contributes to consistent results across repeated series. Contact Metav Werkzeuge in Emmerich for application support or to discuss shipping and integration of this Microtech Metrology instrument — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 138004007 GTIN: 4061905043772 Manufacturer: Microtech Metrology Numbers / Core technical data Measurement range: 26.2–26.6 mm Measurement range (inch): 1.039" Measuring depth: 760 mm Display resolution: 0.0001 mm Digital display: Colour 1.54" touchscreen Accuracy: 12 Digital: true Special features / Versions Data output: Wireless + USB Category: Fine measuring instruments Suitable for deep-bore internal inspection FAQ What bore sizes can be inspected with this instrument? The Internal Precision Gauge covers diameters from 26.2 to 26.6 mm, making it suitable for small-bore inspection tasks within that specific range. How is measurement data exported from the device? Data can be transferred from the instrument via Wireless connection or by USB, enabling direct capture into quality systems or spreadsheets. Is the display suitable for use in workshop lighting conditions? The colour 1.54" touchscreen provides clear visual readout and intuitive operation under typical workshop lighting, aiding repeatable readings. Can the instrument reach deep internal features? Yes — the gauge offers a measuring depth of 760 mm, designed for long internal passages such as precision tubes and small-calibre bores. Which category of precision instruments does this device belong to? With a maximum measuring range under 100 mm, the instrument is classified in the micro segment of fine measuring devices, optimised for compact, high-precision work. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3 mm Centre-Finding Gauge With Dial Indicator 0–3 mm Range, 0.01 mm Resolution, Supplied With Probes In Case - Metav IndustryLine
Take advantage of a compact centring solution that combines high measuring resolution (0.01 mm), a 0–3 mm dial travel and a ready-to-use probe set for fast set-up and consistent centre-finding; order directly via Metav Werkzeuge or consult our specialists for application advice. Centring Device with Dial Gauge M208.070 — Dial 0–3 mm, 0.01 mm resolution (Metav IndustryLine) A Centring Device with Dial Gauge (M208.070) for precise location of bore and shaft centres in workshop measuring and quality control applications Dial gauge 0.01 mm resolution Range 0–3 mm dial measurement Complete set with probes and transport case Lightweight 0.85 kg for easy handling Fast, measurable centring with workshop-grade accuracy The device delivers reliable centre-finding by converting radial runout into a readable analogue signal via the dial gauge. The measuring travel of 0–3 mm and a reading step of 0.01 mm allow technicians to detect minimal deviations during rotation, making alignment tasks faster and more transparent. This setup is especially useful where visual judgement is limited: mounting the instrument and rotating the spindle or workpiece reveals the runout on the indicator, so adjustments can be made until the needle rests within the acceptable range. The mechanical design prioritises repeatable readings, which benefits routine checks and incoming inspection alike. Ready-to-use kit that speeds up setup and changeovers Delivered as a complete package, the centring device includes external and internal probes in lengths of 50 mm, 100 mm and 150 mm, enabling use on a broad span of bore diameters without additional purchases. The supplied transport case protects components during movement between machines and reduces downtime spent searching for adapters. At 0.85 kg, the instrument balances stability with portability, so changeovers between jobs or machines are straightforward and efficient. This configuration reduces set-up time and keeps the workflow lean in both small workshops and maintenance departments. Designed for repeatability and everyday workshop use The analogue indicator is simple to read and robust in shop-floor environments, while the compact footprint makes the device suitable for locating centres on parts up to the indicated operational range. Its construction supports repeated measurements with consistent mechanical behaviour, which translates into fewer re-measurements and less process variation. For production and maintenance teams that value direct, understandable readings over complex electronics, the instrument provides a pragmatic balance of repeatability, usability and mechanical reliability, helping to maintain throughput without sacrificing measurement confidence. For tailored advice or to request the Metav IndustryLine M208.070 for your workshop, contact Metav Werkzeuge in Emmerich—our consultants can confirm compatibility with specific machines and arrange prompt delivery Technical Data SKU: M208.070 GTIN: 4054469104362 ECLASS: 21170534 Tariff code: 90318020 Manufacturer: Metav IndustryLine Facts Weight: 0.85 kg Dial travel: 0–3 mm Resolution/readability: 0.01 mm Measurement principle: Analogue dial indicator Application focus: Centre finding for bores and shafts Special features Supplied with external and internal probes (50 mm, 100 mm, 150 mm) Transport case included for safe handling and transport Compact, lightweight design for quick changeovers Suitable for locating centres on workpieces up to 300 mm FAQ How does the centring device indicate the centre of a bore or shaft? The dial gauge on the centring device translates radial deviation into needle movement; by rotating the workpiece and observing the indicator, the highest and lowest deflections are identified and adjusted until the reading is centred, providing a repeatable centre position with M208.070. What are the measurement range and resolution of the indicator? The instrument features a dial travel of 0–3 mm and a readability of 0.01 mm, offering fine resolution for alignment and centre-finding tasks using the analogue dial. Which probes are included with the device? The delivery contains external and internal probes with lengths of 50 mm, 100 mm and 150 mm, allowing adaptation to different bore diameters without additional accessories. Is the device suitable for mobile use between machines? Yes. The centring device is compact and weighs 0.85 kg, and it is supplied in a transport case for protection during movement and storage. For which applications is this centring device recommended? This instrument is recommended for locating the centre of bores and shafts in workshop measuring, maintenance and quality-control tasks, particularly where straightforward, repeatable analogue readings are preferred over digital systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30-100mm Internal Precision Gauge With 160mm Measuring Pins And 10mm Dial Indicator, 0.01mm Resolution In Case - Metav IndustryLine
Take advantage of a wide measuring range combined with 0.01 mm resolution and a repeatability of 0.005 mm for dependable in-process checks; order the instrument directly via Metav Werkzeuge or contact our advisers for further clarification. M208.413 Internal dial bore gauge — 30–100 mm range, 0.01 mm resolution (Metav IndustryLine) The M208.413 is a precision internal dial bore gauge designed for workshop inspection and quality control of internal diameters from 30 to 100 mm, providing a robust analogue measurement solution for machining and assembly tasks. High-resolution 0.01 mm dial Measuring range 30–100 mm 160 mm measuring rods included High-resolution measurement that reduces rework A mechanical dial system with a 10 mm travel and an 0.01 mm reading offers a clear, repeatable indication for comparative and go/no-go checks. The instrument’s repeatability of 0.005 mm means fewer ambiguous results during batch inspections, which reduces rework and improves process throughput. The analogue dial is simple to read under workshop lighting and requires no batteries, making it a dependable choice for continuous use. Stable handling for consistent bore inspections Built around a matt chrome-plated holder, the gauge balances rigidity with ergonomic handling to keep probe alignment stable during measurement. The included 160 mm measuring rods and a measuring depth of 250 mm extend access into recessed bores while retaining stiffness; this combination supports dependable readings across a wide range of components. Classified for standard workshop use, the set bridges quick shop-floor checks and formal inspection tasks without sacrificing usability. Practical integration into production workflows The assembly includes five gauge pins (5 × Ø6.4 mm, M6), gauge blocks 1+2+3 and extension elements (25 + 25), enabling rapid setup for diverse diameters. The analogue mechanism suits environments where immediate visual feedback is required and where digital interfaces are unnecessary. With concise technical characteristics and a compact working weight of around 1.4 kg, the device is easy to store and move between workstations while maintaining measurement reliability. For hands-on advice or to place an order, contact Metav Werkzeuge in Emmerich — the team can advise on integration into the existing measurement routine and confirm delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M208.413 GTIN: 4054469105505 Category: Messuhren Brand: Metav IndustryLine Weight: 1.4 kg Material: matt chrome-plated holder Type: analogue dial indicator Facts Measuring range: 30–100 mm Measuring depth: 250 mm Measuring rod length: 160 mm Dial travel: 10 mm Resolution: 0.01 mm Repeatability: 0.005 mm Gauge pins: 5 × Ø6.4 mm (M6) Extensions: 25 + 25 Special features Large measuring range for workshop checks Delivered with 10 mm travel dial indicator Includes 160 mm measuring rods Gauge blocks 1+2+3 included Analogue mechanism, battery-free operation Robust holder with matt chrome finish FAQ What internal diameters can this gauge check? The M208.413 internal dial bore gauge (Metav IndustryLine) covers internal diameters from 30 to 100 mm and is optimised for routine workshop and quality-control inspections. How precise are the readings and what is the measurement travel? Readings are displayed to 0.01 mm on a mechanical dial with 10 mm travel; the device achieves a repeatability of 0.005 mm, suitable for consistent shop-floor checks. What accessories are supplied with the gauge? The instrument is supplied with 160 mm measuring rods, five gauge pins (5 × Ø6.4 mm, M6), gauge blocks 1+2+3 and extension elements (25 + 25) to cover a broad range of bore sizes. Is the gauge suitable for deep or recessed bores? Yes — the assembly offers a measuring depth of 250 mm, combined with long measuring rods to reach recessed areas while maintaining probe stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30-50mm Digital External Probe 0.005mm Resolution, Rotating Display, Rounded Tips, Supplied in Case - Metav IndustryLine
Take advantage of a compact measuring solution that combines 0.005 mm resolution and a 30–50 mm working range for precise external checks and groove inspections; the rounded measuring tips (R0.75) and rotating display speed up routine inspections. Order the device directly via Metav Werkzeuge or contact our consultants for application advice. Digital outside indicator M209.164 — Metav IndustryLine, 30–50 mm, 0.005 mm resolution The Digital outside indicator M209.164 is a compact, workshop-ready electronic gauge for precise external measurements and rapid groove checks in confined spaces Rotating digital display with TOL and MODE Resolution 0.005 mm for fine checks Rounded measuring tips R0.75 Designed for quick external groove measurement Precision where small tolerances matter The Metav IndustryLine indicator delivers real benefits for tasks that require fine differentiation: a 0.005 mm display step and a declared accuracy of 0.03 mm make it suitable for detailed external inspections. The instrument’s 30–50 mm measuring span places it in the micro class for compact, high-precision workpieces, which helps to combine reach with minimal deflection. This is particularly useful in quality control where reproducible results are required on small components; the electronic readout removes the need for visual interpolation and reduces operator error. Designed for fast, repeatable workshop checks Ergonomics and functional design reduce cycle time: a rotating display with ON/OFF/SET, ABS/INC/UNIT, TOL and MODE controls puts settings and tolerance indicators within easy reach, while the rounded tips (R0.75) protect mating surfaces and allow reliable contact in grooves and curved profiles. At roughly 0.8 kg, the indicator is light enough to handle comfortably yet robust for everyday use. These features support rapid groove checks and efficient external measurements without compromising measurement integrity. Inspection-ready reliability and practical integration The unit is supplied as a digital test indicator intended for workshop and inspection environments and benefits from Metav’s distribution network and quality assurance processes. Standard factory calibration is applied; ISO 17025 calibration is not indicated for this item. The construction and feature set support repeatable results in routine inspection workflows and make the instrument a pragmatic choice where compactness and resolution are priorities. For additional measurement traceability or specific calibration requirements, Metav Werkzeuge’s consultants can advise on the appropriate documentation and procedures. Contact Metav Werkzeuge to discuss how the Metav IndustryLine Digital outside indicator M209.164 can streamline inspection routines and to request tailored calibration or application advice — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M209.164 GTIN: 4061905044281 Manufacturer: Metav IndustryLine Category: Dial gauges (Messuhren) Facts Measurement range: 30–50 mm Resolution: 0.005 mm Accuracy: 0.03 mm Weight: 0.8 kg Tip radius: R0.75 Suitable measurement: External measurements Special features Rotating digital display with ON/OFF/SET, ABS/INC/UNIT, TOL and MODE buttons Rounded measuring tips for groove and curved-surface contact Rapid measurement capability for external grooves Electronic indicator for clear numerical readout FAQ What measurement range does the indicator cover? The Metav IndustryLine Digital outside indicator M209.164 covers a measuring span of 30–50 mm. What resolution and accuracy can be expected? The instrument provides a resolution of 0.005 mm and a declared accuracy of 0.03 mm for routine inspection tasks. Are the measuring tips suitable for groove measurements? Yes, the rounded measuring tips (R0.75) are specifically suited to reliable contact in grooves and on curved surfaces. Is a calibration certificate supplied with the device? Standard factory calibration applies to this indicator; for traceable ISO 17025 calibration or specific certificates, Metav Werkzeuge can advise on available options. Which measurement tasks is this indicator intended for? The device is intended for precise external measurements and quick groove checks on small to medium workpieces; it is therefore well suited to workshop inspection roles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30-50mm Digital Internal Probe 0.005mm Resolution With Rounded Tips, Rotating Display, Supplied In Case - Metav IndustryLine
Take advantage of precise, repeatable internal measurements offered by the combination of 0.005 mm resolution, a 30–50 mm measuring range and a rotatable digital display for clear read‑out; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital internal probe M209.134 — 0.005 mm resolution, rotatable display (Metav IndustryLine) Digital internal probe M209.134 designed for quick and reliable internal measurements in bores, grooves and similar features 0.005 mm high resolution Measuring range 30–50 mm Rotatable digital display with TOL and DATA Round measuring tips R0.5 Precision where space is limited The M209.134 delivers a 0.005 mm display resolution across a 30–50 mm measuring range, providing fine graduations that support demanding workshop checks. With a stated accuracy of 0.03 mm, the instrument is suitable for routine control of bores and grooves where repeatability is essential. The compact design and dedicated tip geometry minimise measurement disturbance, making it a practical choice for production sampling and incoming inspection alike. Ease of use that improves throughput A rotatable digital display and a clear button layout (ON/OFF/SET, ABS/INC/UNIT, TOL, DATA, MODE) simplify operation and reduce cycle times during repetitive checks. The round measuring tips (R0.5) protect internal surfaces while ensuring stable contact, and the unit’s mass (0.7 kg) gives a reassuring feel without being unwieldy. Built‑in tolerance functions and incremental/absolute switching support direct go/no‑go decisions and simplified documentation of measured values on the workshop floor. Robust design for everyday metrology Engineered for fast measurement of bores and slots, the probe combines practical function with durable construction. The product’s features are arranged for straightforward integration into standard inspection routines, supporting traceable measurement results and consistent process control. For specialised applications or integration into existing inspection chains, Metav’s technical advisors can recommend suitable operating modes and accessories to match the application and quality requirements. Contact Metav Werkzeuge for tailored technical advice, specification support or to request the full technical datasheet for the Metav IndustryLine digital internal probe M209.134 Technical data Article number: M209.134 GTIN: 4061905046452 Manufacturer: Metav IndustryLine Category: Dial gauges / digital internal probe Facts Measuring range: 30–50 mm Resolution: 0.005 mm Accuracy: 0.03 mm Weight: 0.7 kg Tip radius: R0.5 mm Special features Rotatable digital display with ON/OFF/SET, ABS/INC/UNIT, TOL, DATA, MODE Designed for quick measurement of bores and grooves Delivered with round measuring tips ECLASS: 27144044 ETIM: EC000029 FAQ What resolution does the instrument provide? The Metav IndustryLine digital internal probe M209.134 displays measurements to 0.005 mm resolution. Which measurement tasks is the probe intended for? The probe is intended for internal measurements such as bores and grooves; it is optimised for quick, repeatable checks in production and inspection environments. How accurate are the readings? The device is specified with an accuracy of 0.03 mm, suitable for general workshop control and routine dimensional checks. How does the tolerance function work on the display? The built‑in TOL function on the rotatable digital display allows predefined upper and lower limits to be set for immediate pass/fail indication during measurement cycles. Does the display support absolute and incremental modes? Yes—the M209.134 supports ABS/INC selection via the display controls to switch between absolute measurement and incremental tracking. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30-50mm External Rapid Gauge With Rounded Tips 0.01mm Graduation, Case - Metav IndustryLine
Take advantage of a compact, workshop-ready measuring instrument that combines fast external-slot checks with reliable 0.01 mm graduation and practical transport protection; order via Metav Werkzeuge or consult the Metav team for specification support. External Quick-Contact Dial Gauge M209.064 — 30–50 mm range, 0.01 mm graduation (Metav IndustryLine) The External Quick-Contact Dial Gauge M209.064 is a mechanical dial indicator designed for rapid inspection of external grooves, slots and similar features in production and workshop environments. Rapid external slot measurement Range 30–50 mm Graduation 0.01 mm resolution Rounded contact tips R0.75 Fast, traceable checks where speed matters The compact measuring range of 30–50 mm makes this instrument ideal for frequent checks on small to medium workpieces. With a fine 0.01 mm graduation the dial provides immediate, readable increments that accelerate in-process control and reduce machine downtime. The specified accuracy of 0.03 mm allows an objective assessment of tolerance compliance for common workshop tolerances; this combination of quick visual feedback and dependable repeatability supports lean inspection routines and faster decision-making on the shop floor. Built for workshop handling and safe transport Weight and packaging have been considered for everyday use: the gauge is supplied ready for work with a protective transport case, reducing the risk of damage during storage and transit. The instrument’s R0.75 rounded contact tips minimise marking on sensitive surfaces while enabling centred contact in narrow slots and grooves. At approximately 0.75 kg, the unit is robust enough for regular handling yet still convenient to move between machines and inspection benches, promoting consistent measurement practice across several workstations. Clear analogue reading and straightforward integration As an analogue dial gauge, this device requires no batteries and offers a tactile, immediate reading that many operators find faster for quick control loops than powered alternatives. The clearly graduated dial and smooth plunger action simplify repetitive checks and set-up routines; the graduation 0.01 mm supports acceptance checks in standard machining and assembly tasks. Compatibility with common dial holders and magnetic bases ensures easy mounting at inspection points or on machine fixtures, so the tool integrates with established processes without additional adaptations. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine External Quick-Contact Dial Gauge M209.064 into current inspection routines and for delivery options from Emmerich to the workshop. Technical Data Article number: M209.064 GTIN: 4061905043635 Brand: Metav IndustryLine Category: Dial gauge (analogue) Facts Measuring range: 30–50 mm Graduation / resolution: 0.01 mm Accuracy: 0.03 mm Weight: 0.75 kg Special features Analog dial, mechanical display Rounded contact tips R0.75 Delivered in transport case Designed for fast measurement of external grooves and slots FAQ What measuring range does the dial gauge cover? The External Quick-Contact Dial Gauge M209.064 covers a measuring range of 30–50 mm, making it suited to small and medium external features. How fine is the indication on the dial? This analogue instrument provides a graduation of 0.01 mm on the dial, allowing quick visual checks to that resolution. Is the contact tip suitable for narrow grooves? Yes — the gauge is fitted with rounded contact tips (R0.75) which are designed to engage reliably in narrow grooves and reduce surface marking. Does the gauge arrive ready for transport and storage? The device is supplied in a protective transport case to safeguard the instrument during movement and storage. Can the M209.064 be used on the shop floor without power? Yes — as an analogue dial gauge the M209.064 requires no power source and is ready for immediate manual checks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Internal Dial Bore Gauge 250mm Depth With 10mm Dial, 0.01mm Reading, Supplied In Case - Metav IndustryLine
The combination of a 100–300 mm measuring range, 0.01 mm resolution and 250 mm measuring depth delivers reliable internal measurements across workshop applications; order the gauge directly via Metav Werkzeuge or contact our consultants for specification advice. M208.414 interior precision gauge — 100–300 mm range with 10 mm dial (Metav IndustryLine) The M208.414 is an analogue interior measuring instrument designed for accurate internal dimension checks in metalworking and general workshop quality control, featuring a long measuring depth and a fine 10 mm dial for clear incremental readings. Large measuring range 100–300 mm High resolution 0.01 mm dial reading Repeatability 0.005 mm for consistent checks Matt chrome-plated holder for durability Precision where reach and resolution matter This interior gauge combines a 100–300 mm measuring range with a 10 mm dial that provides a clear 0.01 mm resolution, making it suitable for the workshop standard class of internal gauges. Classified in the standard range for machine and metalwork measurement, it offers a practical balance between reach and stiffness: the long jaw length supports measurements of medium-sized bores and housings while retaining ease of handling. The instrument’s repeatability of 0.005 mm ensures repeat measurements remain consistent, so process control and routine inspections can be performed with confidence. Stable construction for reproducible measurements Built around a matt chrome-plated device holder, the gauge is engineered for stable contact and minimal flex during probing. The 250 mm measuring depth extends access into deeper features without sacrificing support for the measuring posts; six measuring pins (Ø8 mm) distribute contact forces and reduce point loading on the workpiece. Extensions of 50 mm and 100 mm are available to increase effective reach for larger components. Delivered in a protective case for safe transport, the unit’s design focuses on repeatable readings and long service life in industrial environments. Straightforward operation with industrial applicability Operation is carried out via the analogue dial and sliding beam, allowing rapid incremental readings on the dial while the beam covers the full range. This familiar mechanical principle minimises setup time in production or inspection routines and avoids reliance on batteries or electronics. The gauge is ideal for routine internal checks, fixture set‑up verification and incoming part inspection where clear, tactile feedback and mechanical robustness are preferred. Its attributes make it a practical tool for workshops seeking reliable internal measurement without complex data management. Discuss the Metav IndustryLine M208.414 with Metav Werkzeuge for tailored advice and delivery from Emmerich — our consultants can confirm suitability for specific components and propose compatible extensions. Technical Data Article number: M208.414 GTIN: 4061905045103 Gauge type: analogue interior precision gauge Measuring range: 100–300 mm Measuring depth: 250 mm Dial resolution: 0.01 mm Dial travel: 10 mm Repeatability: 0.005 mm Weight: 1.4 kg Facts Material: matt chrome-plated device holder Measuring pins: 6 × Ø8 mm Extensions available: 50 mm, 100 mm Delivery format: protective case (for transport) Classification: standard workshop range (100–300 mm) Special features Large internal measuring range High repeatability for routine quality control Analogue dial for incremental reading Robust holder for reduced flex Suitable for machine and metalworking inspections Gauge shims supplied: 1, 2, 3, 5 FAQ What resolution and repeatability does this interior gauge offer? The M208.414 provides a dial resolution of 0.01 mm and a stated repeatability of 0.005 mm, suitable for precise workshop inspections. Is the instrument suitable for deeper internal features? Yes — with a 250 mm measuring depth and available extensions (50 mm and 100 mm), the gauge allows access to deeper bores and cavities while maintaining stable support. What is included for transport and protection? The instrument is supplied in a protective case for transport and safe storage; the delivery also includes gauge shims (1, 2, 3, 5) and the measuring pins referenced in the technical data. Can this analogue gauge be used for routine incoming inspection in a metalworking shop? Absolutely — its combination of 100–300 mm range, 0.01 mm dial resolution and 0.005 mm repeatability makes it well suited for standard workshop quality control and fixture checks. How are longer reaches achieved if required? Longer effective reach is achieved using the supplied or optional 50 mm and 100 mm extensions, extending the instrument’s applicability to larger components. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30–50mm Internal Rapid Bore Gauge 0.01mm Resolution, Rounded Tips, Supplied in Case - Metav IndustryLine
Take advantage of a compact, workshop-ready solution that combines high resolution (0.01 mm) and dependable repeatability (±0.03 mm) for rapid internal checks of bores and grooves; the instrument is supplied in a protective transport case and can be ordered directly via Metav Werkzeuge or discussed with their consultants for tailored advice. M209.034 Internal Quick-Action Dial Indicator — 30–50 mm, 0.01 mm resolution (Metav IndustryLine) The M209.034 internal quick-action dial indicator is a compact mechanical gauge designed for fast interior measurements of bores, grooves and similar features in the 30–50 mm range. Fast internal measurement 30–50 mm High resolution: 0.01 mm scale Accuracy ±0.03 mm for reliable results Supplied in protective transport case Rapid, reliable internal measurement for everyday workshop use The compact mechanical dial indicator offers a clear advantage where speed and robustness matter: a 0.01 mm graduation combined with a specified accuracy of ±0.03 mm gives a tangible improvement in process control compared with coarser gauges. Designed for quick checks of internal bores and slots, the instrument reduces inspection time while maintaining traceable repeatability. The analogue display is straightforward to read and well suited for use at the bench, on jigs or in fixture-based checks, making it a practical tool for manufacturing and maintenance routines. Compact design that preserves accuracy in small spaces With a measurement span of 30–50 mm, this inside probe fits the category of compact internal gauges tailored to fine mechanical work. The short measuring geometry reduces deflection and helps keep readings reproducible when probing small-diameter features. The round contact tips (R0.5) transmit contact forces consistently to the mechanism, and the overall device weight of around 0.8 kg gives a sense of solid construction without becoming unwieldy during manual measurements. For applications where repeatable internal checks are required, the form factor supports both speed and control. Clear benefits for process efficiency and quality assurance Using a dedicated internal quick-action instrument streamlines routine inspection: fewer tool changes, faster measurement cycles and reduced risk of handling errors. The analogue mechanism avoids reliance on batteries or electronics, providing continuous readiness for shop-floor use. Delivered in a protective transport case, the gauge remains protected during storage and transport, reducing the chance of damage that would affect accuracy. For production environments that demand consistent internal measurement capability, this gauge supports both throughput and product quality. Contact Metav Werkzeuge in Emmerich to discuss supply and technical suitability of the M209.034 internal quick-action dial indicator and to arrange delivery or further specification advice Technical data SKU: M209.034 GTIN: 4061905045943 Category: Dial gauges (Messuhren) Manufacturer: Metav IndustryLine Facts Measuring range: 30–50 mm Resolution / graduation: 0.01 mm Specified accuracy: ±0.03 mm Weight: 0.8 kg Special features Mechanical (analog) dial indicator Round contact tips R0.5 Designed for quick measurement of bores and grooves Supplied in a protective transport case FAQ What is the measuring range of this instrument? The M209.034 has a measuring range of 30–50 mm, suitable for small internal diameters and similar features. What resolution and accuracy can be expected? The instrument provides a resolution of 0.01 mm and a specified accuracy of ±0.03 mm. Is the unit analogue or digital? This is an analogue mechanical dial indicator; it does not feature digital data output. What contact tip is fitted and what is it for? The gauge is fitted with round contact tips (R0.5), optimised for consistent contact in bores and narrow grooves. How is the instrument delivered? The M209.034 is supplied in a protective transport case to safeguard the gauge during storage and movement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35-300mm Setting Device For Internal Dial Gauge With Adjustable Stop And Height/Width, Lapped Measuring Jaws, Supplied In Case - Metav IndustryLine
The combination of an adjustable stop, lapped measuring jaws and a 35–300 mm setting range ensures precise, repeatable setup of internal measuring instruments; perfect for routine workshop calibration and quality checks. Order the device via Metav Werkzeuge or consult our advisors for application support and delivery from Emmerich. Setting rig for internal fine measuring instruments M208.032 — adjustable stop and 35–300 mm setting range A Setting rig for internal fine measuring instruments M208.032 designed to set and check internal dial gauges and fine measuring tools across a practical workshop range of 35–300 mm. Adjustable stop, height and width Lapped measuring jaws for repeatable contact Setting range 35–300 mm Supplied in protective transport case Consistent, repeatable gauge setting for robust inspection results This setting unit delivers a measured approach to internal gauge setup: the adjustable stop with height and width adjustment secures contact geometry, while the lapped measuring jaws provide stable, low-friction surfaces that reduce measurement scatter. Designed for routine use in inspection benches and measuring rooms, the rig supports repeatability by eliminating variable contact points and by keeping the datum orientation constant. The result is a reliable reference for subsequent dial‑indicator adjustments and short run calibrations. Practical workshop handling that speeds up adjustment tasks With a 35–300 mm setting range classified as standard for workshop metrology, the device covers the most common diameters encountered in machine and metalworking environments. The compact construction and a setting depth of 55 mm make alignment straightforward on a bench, while the jaw dimensions (9 × 19 × 100 mm) provide secure seating for internal probes. The unit’s mass gives it stable footing during repetitive operations, and the transport case protects the assembly when moved between workstations or shipped for service. Suitable applications and quality-focused construction The rig is optimised for use with internal dial gauges and fine internal measuring instruments, supporting tasks such as pre‑inspection checks, in-process verification and quick comparative measurements. The lapped measuring jaws are finished for reliable contact and long life, reducing surface wear on the instruments under test. Built to support consistent workshop workflows, the device helps keep throughput steady while maintaining metrological confidence — a pragmatic choice where predictable results and ease of use matter. For reliable internal gauge calibration and practical bench use choose the Metav IndustryLine M208.032 — contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich Technical data Article number: M208.032 GTIN: 4061905045608 Manufacturer: Metav IndustryLine Facts Setting range: 35–300 mm Setting depth: 55 mm Jaw dimensions: 9 × 19 × 100 mm Weight: 6.6 kg Special features Adjustable stop; height and width adjustable Lapped measuring jaws Supplied in transport case Without end pieces FAQ What setting range does the device cover? The setting rig covers a range of 35–300 mm, suitable for standard workshop internal measurements and routine dial‑gauge adjustments. Are end measures or end pieces included with the rig? No, the product is supplied without end pieces; the device provides the adjustable stop and jaws for setting instruments within the stated range. What material finish do the measuring jaws have? The measuring jaws are lapped, providing a smooth, repeatable contact surface that supports stable gauge setting and minimises wear. Which instruments is this rig intended for? The unit is intended for internal fine measuring instruments such as internal dial gauges and comparable probes used in workshop inspection and quality control. How is the device delivered for transport? The rig is supplied in a protective transport case to safeguard the assembly and the lapped jaw surfaces during handling and shipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35-50mm Digital Internal Micrometer 0.01mm Reading, Depth 150mm, Comes in Case - Metav IndustryLine
Product data inconsistency detected: conflicting values for repeatability/accuracy are present (0.005 mm versus 0.01 mm). This discrepancy may lead to confusion or errors in understanding the product's specifications. It is essential to ensure that the correct values are identified and verified to maintain the integrity of the product information. Please verify the source data thoroughly to determine which value is accurate before proceeding with the generation of a product description. Accurate and consistent data is crucial for creating reliable product descriptions that meet customer expectations and avoid potential misunderstandings.
35-50mm Gauge Pins Set, 4-Piece, 6mm Diameter - Metav IndustryLine
Consistent repeatability and simple replacement: the set combines precise 35–50 mm coverage with a standard 6 mm shank for reliable fitment and quick accessory changes. Benefit from four interchangeable pins that streamline internal measurements and maintain process stability. Order the set directly via Metav Werkzeuge or consult the technical advisors for compatibility checks. M208.052.BZ1 Measuring Pins Set – 35–50 mm range, 6 mm shank (Metav IndustryLine) The M208.052.BZ1 provides precision gauge pins designed to extend internal measurement capability for fine measuring instruments within the 35–50 mm span, suitable for workshop and light industrial use Precision coverage 35–50 mm 6 mm shank for common holders Set of four interchangeable pins Accessory for internal fine measuring devices Reliable internal measurement for repeatable quality control These gauge pins deliver consistent internal measurement across the specified span, supporting repeatable inspection routines in production and maintenance workflows. Inserted into internal dial or fine measuring instruments, the pins act as stable contact points that reduce measurement variability and help maintain traceable results. The compact format ensures rapid exchange between diameters, which reduces gauge downtime and supports efficient batch checks. Quick integration with existing holders and fixtures Designed with a 6 mm shank, the set fits common pin holders and accessory adaptors used on internal fine measuring devices, enabling seamless integration without bespoke tooling. The configuration of interchangeable pins shortens setup time and simplifies instrument configuration when switching between comparable workpieces. Clear compatibility with the referenced measuring head model avoids unnecessary adjustments and keeps inspection throughput high. Practical workshop accessory for everyday metrology tasks As a lightweight, compact accessory, the set supports routine measurements where internal dimensions are critical, for example bore checks, sleeve fits and component seating verifications. The four-piece composition gives flexibility for staged measurements and on-the-spot verification, while the conservative form factor keeps bench clutter to a minimum. For operations seeking dependable, low-complexity aids to dimensional control, this accessory strengthens measurement coverage without adding procedural complexity. Contact Metav Werkzeuge to confirm fitment and reserve the Metav IndustryLine M208.052.BZ1 measuring pins; advisors in Emmerich will provide compatibility details and delivery options Technical data Article number: M208.052.BZ1 GTIN: 4054469163154 Manufacturer: Metav IndustryLine Weight: 0.02 kg Measuring range: 35–50 mm Shank diameter: 6 mm Pieces per set: 4 Tariff number: 90179000 Accessory for internal fine measuring devices Compatible with model 208.023 Compact set for quick interchange FAQ What measurement range do the pins cover? The set covers the 35–50 mm measurement range for internal checks and is specified for that span with the Metav IndustryLine M208.052.BZ1 accessory. Are these pins compatible with standard pin holders? Yes; the 6 mm shank is intended for common holders and adaptors used with internal fine measuring instruments. How many pins are included in the delivery? The delivery contains four individual gauge pins as a single set for staged or sequential measurements. Can these pins be used for bore verification in production? The gauge pins are suitable for routine bore and seating verifications where a compact, repeatable contact accessory is required. Is the set intended for a specific measuring head or model? The pins are marked as compatible with model 208.023, facilitating direct integration with that measuring head family. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35-50mm Internal Bore Gauge Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Combining ISO 17025-level calibration, wireless data transfer and a compact measuring range, this internal bore gauge delivers reproducible internal measurements for precision inspection and production control. Order the internal bore gauge directly via Metav Werkzeuge or ask our consultants if needed. Internal bore gauge — digital, ISO 17025-calibrated instrument by Microtech Metrology The Internal bore gauge is a digital internal measuring instrument for fast, reproducible checks of inside diameters in precision workshops and inspection benches. ISO 17025 calibration certificate included Wireless and USB data output Colour 1.5" touchscreen display Measuring range 35–50 mm, high stability Consistent, certified accuracy for repeatable inspection The instrument is supplied fully calibrated to ISO 17025, which means every unit leaves the factory with a traceable calibration certificate for quality assurance and audit purposes. With a stated accuracy of ±0.012 mm (12 µm) and a fine display increment of 0.0001 mm, the device provides measurement certainty that supports statistically reliable quality decisions. Classified as a micro measuring instrument due to its measuring range 35–50 mm, it is intended for tasks where compact dimensions and high reproducibility are essential, such as precision components and small-bore inspection. Faster data capture and fewer transcription errors Equipped with Wireless and USB outputs and a Colour 1.5" touchscreen, the gauge reduces manual data handling and streamlines inspection workflows. Measurements can be exported directly to inspection software or logged via USB for immediate documentation, lowering the risk of transcription mistakes and accelerating batch reporting. The instrument’s retractable measuring head simplifies insertion into bores, while the intuitive display speeds up read‑out and on-bench operation—practical advantages for production lines and small metrology labs aiming to improve throughput. Compact handling with robust measurement performance Designed for shop-floor use, this digital internal gauge combines compact ergonomics with stable measurement behaviour. The construction supports steady contact and minimal deflection, so results remain reproducible across repeated checks. The device is especially suitable where one-person operation and quick set-ups are required; the tactile controls and visible display make routine inspections straightforward. Supplied by Microtech Metrology, the unit balances the precision required by inspection routines with the usability demanded in busy workshops. Contact Metav Werkzeuge today to discuss how this Microtech Metrology internal bore gauge can be integrated into existing inspection routines or to request the calibration documentation and delivery information; Metav Werkzeuge provides dedicated consultant support from Emmerich. Technical data SKU: 131050745 GTIN: 4061905043383 Manufacturer: Microtech Metrology Facts Measuring range: 35–50 mm Accuracy: ±0.012 mm Display increment: 0.0001 mm Display: Colour 1.5" touchscreen Modules: 2 Special features Data output: Wireless + USB Retractable measuring head Digital instrument Supplied with ISO 17025 calibration certificate FAQ Is the instrument delivered calibrated? Yes. The internal bore gauge from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes a traceable calibration certificate (SKU 131050745). What is the measuring range of this gauge? The device covers a measuring range of 35–50 mm, making it suitable for compact internal diameters and fine mechanical parts. How are measurement values exported? Measurement data can be transferred wirelessly or via USB, enabling direct logging to inspection software or export for documentation. What accuracy and resolution can be expected? The instrument provides an accuracy of ±0.012 mm with a display increment of 0.0001 mm, offering the precision needed for reliable internal measurements. Is this device suitable for workshop use? Yes. The combination of a compact design, retractable measuring head and a colour touchscreen makes it practical for routine on‑bench inspection and production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
35-50mm Internal Precision Bore Gauge Carbide Anvils 0.01mm Graduation Repeatability 0.005mm, Supplied In Case - Metav IndustryLine
Take advantage of the combination of carbide measuring faces, 0.01 mm dial resolution and a robust matt‑chrome holder for reliable internal checks; the instrument arrives in a transport case with gauge shims included and can be ordered via Metav Werkzeuge for prompt supply. Internal Precision Gauge M208.222 — Carbide contact, 0.01 mm resolution The Internal Precision Gauge M208.222 is an analogue internal measuring instrument for precise inspection of bores and housings in workshops and tool rooms, covering a measurement span of 35–50 mm. Carbide measuring head Measurement range 35–50 mm 0.01 mm dial resolution Repeatability 0.005 mm Precision for repeatable internal measurement The gauge is built around a hardened carbide measuring head, giving wear resistance where contact is constant, and an analogue dial with 0.01 mm reading that supports fine incremental checks. The specified repeatability 0.005 mm indicates the instrument’s ability to return consistent values under repeat measurements, which makes it suitable for routine quality checks and acceptance testing. In practice, the fine resolution combined with stable repeatability reduces false rejects and helps maintain process control in production runs. Robust construction tuned to workshop use A matt‑chrome device holder provides corrosion resistance and a firm mount for the measuring mechanism; the instrument includes six measuring pins and a measuring depth of 150 mm, enabling access into deeper bores without losing stability. The analogue mechanism favours mechanical robustness and straightforward read‑out in the workshop environment, while the supplied gauge shims (1 + 2) support quick verification and set‑up. Delivered in a transport case, the unit is protected during storage and transit, simplifying handling between bench and machine. Small‑range inspections with broad practical benefit With its 35–50 mm span the instrument sits in the micro class for compact internal gauges, ideal where high precision in confined spaces is needed—engine components, bearing seats and small housings benefit from its compact geometry. The combination of wear‑resistant contact faces and solid mechanical design translates into lower maintenance needs and predictable inspection outcomes, supporting throughput without adding verification overhead. Contact Metav Werkzeuge to confirm availability in Emmerich, request a detailed specification sheet for the M208.222, or arrange delivery tailored to workshop schedules. Technical data Article number: M208.222 GTIN: 4061905044700 Category: Dial gauges Type: analogue Key figures Measurement range: 35–50 mm Resolution (dial): 0.01 mm Repeatability: 0.005 mm Measuring depth: 150 mm Measuring pins: 6 Design & features Carbide measuring faces Device holder matt‑chromed Gauge shims included (1 + 2) Transport case for delivery Weight: 1 kg FAQ Is the instrument suitable for bores and internal diameters? The Internal Precision Gauge M208.222 is designed specifically for internal measurements and is suitable for bores and internal diameters within the 35–50 mm range. What level of accuracy can be expected in repeat measurements? Repeat measurements show a repeatability of 0.005 mm, which supports consistent inspection results for routine quality control. Does the gauge include any accessories for verification? Yes, the delivery includes gauge shims (1 + 2) and the instrument is supplied in a transport case to protect the unit during handling. Are the measuring faces durable for frequent contact use? The gauge is equipped with carbide measuring faces, offering high wear resistance and longevity when used in regular inspection cycles. Is the read‑out analogue or digital? The instrument uses an analogue dial with a 0.01 mm graduation for visual read‑out and dependable mechanical operation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400-1000 mm Internal Micrometer With Retractable Measuring Head, Colour Touchscreen, ISO 17025 Calibration - Microtech Metrology
Take advantage of a wide 400–1000 mm measuring range, traceable ISO 17025 calibration and modern data transfer to speed up inspection routines and reduce measurement errors; order the instrument directly via Metav Werkzeuge or ask the consultants for integration advice. Microtech Metrology internal fine measuring instrument — large‑range internal gauge with retractable head and colour touchscreen Microtech Metrology internal fine measuring instrument is a digital internal gauge intended for high‑accuracy inspection of large bores and internal features in production and quality control environments. Retractable measuring head for protected handling Colour 1.5" touchscreen for clear readout Wireless + USB data export for traceable logs ISO 17025 calibration and certificate included 400–1000 mm range for large internal bores Precision for large internal measurements The instrument offers a 400–1000 mm range, placing it among long‑beam calipers for larger components where stability and repeatable reach matter. The construction balances rigidity with manageable handling, reducing deflection across the span and enabling reliable internal measurements of sizeable assemblies and housings. With a fine display resolution of 0.0001 mm and a stated accuracy of 0.045, the device delivers consistent numeric results suitable for process checks and incoming inspection. The retractable measuring head protects the sensitive tip during transport and handling, preserving the long‑term stability of the measuring geometry. Fast digital readout and seamless data capture Equipped with a Colour 1.5" touchscreen, the instrument provides immediate visual feedback and intuitive operation for workshop staff, shortening training times. Data export over Wireless + USB ensures measurement logs can be transferred directly to inspection software or an SPC system, reducing transcription errors and accelerating documentation. The unit includes multiple configuration modules (5) for storing presets and measurement routines, enabling efficient switch‑over between recurring tasks. These digital capabilities support a measurable productivity gain when incorporated into routine quality workflows. Calibrated traceability and workshop robustness Delivered with an ISO 17025 calibration and accompanying certificate, the device satisfies strict traceability requirements and simplifies compliance for internal audits. The included support set contains the necessary items for secure use and basic adjustment in the workshop. The retractable head and robust electronics are designed for production environments: resistant to everyday handling and geared towards long service intervals. The measuring depth specification and modular configuration further aid adaptation to specialised inspection stations where extended reach is required. Practical fit for production and quality control As a long‑reach internal measuring instrument, it reduces the need for makeshift setups and repeat measurements by providing a single, traceable solution from inspection bench to process control. The combination of digital connectivity, stable mechanical design and accredited calibration supports faster decisions on conformity, fewer reworks and clearer production records. For technical questions or to discuss integration into existing workflows, Metav Werkzeuge offers experienced advice and logistical support to ensure the instrument meets the shop‑floor requirements. Contact Metav Werkzeuge for tailored integration advice and to arrange delivery of the Microtech Metrology internal fine measuring instrument complete with ISO 17025 certificate Technical data SKU: 131990795 GTIN: 4061905044571 Manufacturer: Microtech Metrology Facts Measuring range: 400–1000 mm Minimum measuring range: 400 mm Maximum measuring range: 1000 mm Resolution (readout): 0.0001 mm Accuracy: 0.045 Measuring depth: 10000 Modules: 5 Display: Colour 1.5" touchscreen Special features Retractable measuring head Wireless + USB data output Digital instrument ISO 17025 calibration and certificate included Support set included FAQ Is the instrument delivered calibrated? Yes. The Microtech Metrology internal fine measuring instrument is supplied with an ISO 17025 calibration certificate as part of the delivery. What resolution and accuracy can be expected? The unit provides a display resolution of 0.0001 mm and a stated accuracy of 0.045, suitable for production control of large internal geometries. How can measurement data be exported? Measurement data can be exported via Wireless + USB, allowing direct transfer to inspection software or data loggers. Which measuring tasks is the instrument best suited for? The device is designed for internal measurements of large bores and housings within the 400–1000 mm range, making it appropriate for fixture, housing and heavy‑duty component inspection. What accessories are included with delivery? The instrument is supplied with a support set and protective features such as the retractable measuring head; calibration documentation is included where applicable. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Fast, repeatable geometry checks in seconds
Caliper gauges (also referred to as precision calipers or quick-action gauges) are high-efficiency fine measuring instruments designed for precise geometry control in the production environment. Need to verify internal grooves, pipe wall thickness or small bores quickly? These tools deliver reliable results at sampling speed, making them ideal for series production, incoming goods inspection and workshop testing.
How they work and where they belong
The core of these devices is a spring-loaded lever system that applies a defined contact force, so measurements remain repeatable and independent of the operator’s feel. Caliper gauges capture hard-to-reach features — deep internal grooves, notches, freeform surfaces and thin walls — either mechanically or in digital form. Ergonomic one-handed operation allows the workpiece to stay in the machine or on the test table while checks are performed, reducing handling and downtime.
Practical advantages that improve throughput
- Consistent repeatability due to defined contact force, lowering measurement scatter.
- Rapid sampling: geometry checks are performed in the time of a few seconds, reducing cycle times.
- Flexible contact options such as ball, blade or disc contacts, matching different workpiece geometries.
- Choice of robust analog models or digital units with Go/NoGo tolerance indication and interfaces for direct integration into digital quality assurance.
- Ergonomic design that shortens set-up and inspection times, increasing shop-floor productivity.
Metav: a reliable precision partner for industry
Metav combines decades of metrology experience with a broad offering from Emmerich, acting as a quality filter for the European market. With more than 48,000 customers and over 250,000 products, Metav supplies a comprehensive selection of caliper gauges and accessories, helping purchasing managers reduce supplier complexity while securing reliable supply and technical competence.
Summary
Caliper gauges — precision calipers and quick-action gauges — provide fast, repeatable and operator-independent measurements for demanding industrial inspection tasks, delivering measurable gains in throughput and quality control.
FAQ
What makes caliper gauges suitable for deep internal measurements?
The spring-loaded lever system in caliper gauges ensures a defined contact force while specialised stylus geometries (ball, blade, disc) reach deep grooves and notches, enabling precise capture of internal features.
Can digital caliper gauges be integrated into existing quality systems?
Yes. Digital caliper gauges often include tolerance indication (Go/NoGo) and data interfaces, allowing direct connection to digital quality assurance systems for automated logging and analysis.
Which contact form should I choose for thin-walled parts?
For thin or delicate walls, disc or ball contacts minimise local deformation; Metav’s product range lists the available contact geometries so you can match the caliper gauge to the application.
How do caliper gauges maintain operator-independent repeatability?
Defined contact force from the spring-loaded lever system removes variability caused by hand pressure, so caliper gauges deliver consistent measurements across different operators and cycles.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com