High-precision caliper gauges for rapid, repeatable measurements
Specialist caliper gauges and quick-test probes deliver fast, reliable geometry checks in production, incoming inspection and workshop use by mechanically or digitally capturing hard-to-reach features such as deep internal grooves, bore depths, tube wall thicknesses and freeform surfaces. Their spring-loaded lever mechanism ensures a defined contact force for absolutely repeatable results independent of the operator, while ergonomic designs allow one-handed operation with the workpiece remaining in the machine or on the inspection table. Available in a range of contact shapes and probe arm geometries, these precision calipers include analogue dial options for robust continuous use and digital models with tolerance signalling and data interfaces for seamless integration into quality control systems.
19.7–20.1 mm Internal Precision Bore Gauge Colour Touchscreen Wireless USB - Microtech Metrology
Take advantage of the instrument's combination of ultra‑fine resolution and modern data transfer for reliable inspection of small bores; the device's compact design and touch display speed routine checks and support traceable record keeping. Order this measuring solution directly via Metav Werkzeuge or consult our specialists for application advice. Internal Fine Measuring Device — microcomputer-controlled internal gauge with Wireless + USB The Internal Fine Measuring Device is a compact digital gauge designed for high‑precision internal diameter measurement of small bores and precision components, suitable for workshop and quality‑control environments. Wireless + USB data output Colour 1.54" touchscreen display High resolution: 0.0001 mm Precise measurements for small bores and fine mechanics Classified in the Mikro class owing to its 19.7–20.1 mm measuring range, this instrument concentrates machining and inspection performance on narrow bores where dimensional tolerances are tight. The instrument delivers a 0.0001 mm display step, enabling discernment of minute deviations that affect fit and function in precision components. The compact footprint and focused range make the gauge particularly suitable where stiffness and minimal probe deflection matter, such as in fine mechanical assemblies and calibre‑sized bores. Seamless data capture and integration into quality workflows Equipped with Wireless and USB connectivity and a 1.54" touchscreen, the gauge transfers readings directly to process documentation or SPC systems, reducing transcription errors and accelerating throughput. The built‑in microcomputer handles measurement logic and stores sessions locally, so inspection routines proceed without interruption even when network access is intermittent. This connectivity supports a rational, evidence‑driven inspection routine and simplifies traceability for audit or certification purposes. Repeatable inspection over extended bore lengths A measuring depth 760 mm enables inspection of internal features over longer axial distances, preserving the ability to check bore uniformity across a component's full working length. The instrument's mechanical design and electronic readout work together to ensure measurement repeatability, providing a consistent basis for go/no‑go evaluations and statistical process control. The device's defined accuracy rating supports reliable pass/fail criteria in production and inspection tasks. Tailored for specialised applications and workshop use Engineered for small‑bore applications, the gauge is compatible with calibre‑specific checks — notably calibre 10 — and is practical for inspection of gun barrels, hydraulic components and other precision cylindrical parts. The compact, digital format reduces setup time compared with manual comparators, while the touchscreen interface and direct data export make routine documentation quicker and less error‑prone. The combination of targeted range, high resolution and modern connectivity brings both technical rigour and operational ease to everyday quality control. For specification matching, calibration options and supply, contact Metav Werkzeuge in Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss Microtech Metrology solutions and order advice Technical Data Article number: 138010007 GTIN: 4061905046407 Manufacturer: Microtech Metrology Digital display: Colour 1.54" touchscreen Data output: Wireless + USB Core data Measuring range: 19.7–20.1 mm (0.775") Maximum measuring range: 20.1 mm Minimum measuring range: 19.7 mm Resolution / display step: 0.0001 mm Measuring depth: 760 mm Accuracy value: 12 Features Digital instrument for internal fine measurement Microcomputer control for measurement logic Wireless and USB connectivity for data export Suited to small bores and precision components Category: Fine measuring devices FAQ What bore sizes can this instrument measure? The gauge covers a narrow internal range of 19.7–20.1 mm, making it suitable for precision checks within that span and for components around 0.775" nominal diameter. Is the device suitable for calibre checks such as calibre 10? Yes, the instrument is compatible with calibre‑specific inspections and is indicated for checks such as calibre 10, providing focused resolution for such applications. How are measurements exported from the instrument? Measurements are delivered via Wireless or USB output; the internal microcomputer stores sessions and allows direct transfer to documentation or SPC workflows. What is the display resolution and why does it matter? The instrument displays readings in 0.0001 mm steps, permitting detection of very small deviations and supporting strict tolerance control in fine mechanical and bore inspection tasks. Can the device inspect along the full length of longer bores? With a measuring depth of 760 mm, the instrument can assess internal features along extended axial lengths, aiding the verification of bore uniformity and straightness. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-40mm Digital Internal Depth Gauge 0.005mm Resolution With Rounded Tips, Rotating Digital Readout In Plastic Case - Metav IndustryLine
Take advantage of precise inside measurement with a high-resolution digital readout and a compact 20–40 mm measuring range for quick inspection of bores and grooves. Order directly via Metav Werkzeuge or consult our advisors for technical matching to inspection tasks. Digital internal dial indicator M209.133 – 20–40 mm, 0.005 mm resolution (Metav IndustryLine) The Digital internal dial indicator M209.133 is a compact electronic inside probe for fast measurement of bores, slots and internal features in workshop quality control and small-series inspection. Fast measurement of bores and grooves High resolution 0.005 mm Measuring range 20–40 mm Precision where small deviations matter The instrument delivers a resolution of 0.005 mm, enabling reliable detection of fine deviations in small bores and machined slots. With a stated measuring accuracy of 0.03 mm, the device is suitable for routine quality-control tasks in metalworking and precision assembly where repeatable results are required. The round measuring tips R0.5 reduce marking on workpiece surfaces and ensure consistent contact geometry, which helps to avoid measurement artefacts that can occur with blunt probes. Designed for efficient workshop inspection A rotatable display with ON/OFF/SET, ABS/INC/UNIT, TOL and MODE controls simplifies reading orientation and allows switching between absolute and incremental modes as well as unit selection. This speeds up inspection cycles and reduces handling time during series checks. The compact construction and a weight of about 0.7 kg make the instrument easy to position in fixtures or by hand, while the 20–40 mm range covers the typical bore sizes encountered in tooling, maintenance and small-part production. Robust handling and transport for everyday use The indicator is built for practical workshop use: the electronics are integrated into a secure housing and the set is supplied in a protective case for transport and storage, which reduces the risk of shock or contamination during handling. Clear mechanical design and durable probe tips support repeatable measurements even under frequent use, which contributes to lower inspection cycle times and fewer re-measurements on the shop floor. For precise internal measurements with reliable digital readout, contact Metav Werkzeuge for ordering information and application advice from our Emmerich team Technical data Article number: M209.133 GTIN: 4061905046445 Brand: Metav IndustryLine Facts Measuring range: 20–40 mm Resolution: 0.005 mm Accuracy: 0.03 mm Weight: 0.7 kg Special features Round measuring tips R0.5 Rotatable digital display with ABS/INC/UNIT and TOL functions Fast measurement of bores and grooves Supplied in a protective case FAQ What measuring range does this indicator cover? The indicator covers an internal measuring range of 20–40 mm, ideal for small bores and slots. What is the smallest readable increment? The electronic readout shows measurements down to 0.005 mm, allowing precise assessment of fine tolerances. Is the probe suitable for delicate surfaces? Yes, the R0.5 round tips minimise marking and provide consistent contact, making the probe suitable for softer or finished internal surfaces. Which display functions are available on the unit? The rotatable display offers ABS/INC switching, UNIT selection, TOL tolerance mode and basic setting keys for quick adaptation to inspection tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-40mm Digital Outside Probe 0.005mm Resolution, Rotating Display, Round Tips, Case - Metav IndustryLine
Take advantage of the combination of fast groove measurement, sub‑division resolution and a robust contact geometry for consistent inspection results; order the instrument via Metav Werkzeuge or contact our consultants for application advice. Digital external probe M209.163 – 20–40 mm, 0.005 mm resolution (Metav IndustryLine) The Digital external probe M209.163 is a compact, workshop‑grade measuring instrument for rapid measurement of external grooves and narrow features in component inspection. High resolution 0.005 mm display Measuring range 20–40 mm Rounded contact tips R0.75 for delicate surfaces Rotatable display with practical function keys Precise numeric control for groove and shoulder inspection A precision instrument designed for targeted external measurements, the gauge provides 0.005 mm resolution and a practical accuracy of ±0.03 mm, enabling reliable detection of small deviations during routine inspections. The combination of a stable contact geometry and the specified resolution makes the device well suited for quality control tasks in production and maintenance environments. The supplied mass of 0.8 kg gives a reassuring feel in hand while remaining portable at the workstation. Ergonomic operation that speeds up inspection workflows The unit features a rotatable display with clearly labelled keys (ON/OFF/SET, ABS/INC/UNIT, TOL, MODE) to streamline setup and measurement routines. The rounded R0.75 contact tips protect sensitive surfaces and are ideal for measuring grooves and stepped features without introducing local damage. With a focused measuring range of 20–40 mm, the instrument is purpose‑matched to repetitive checking of shafts, collars and external slots where quick, repeatable readings reduce cycle time. Built for the shop floor with professional provenance Delivered in a protective box for safe transport and storage, the instrument is arranged for immediate use in inspection benches and mobile quality carts. As part of the Metav IndustryLine portfolio, the probe benefits from an established supply chain and product support aimed at industrial metrology and measurement tasks. The robust feature set supports efficient quality decisions that reduce rework and improve throughput across small‑batch and series production alike. Speak with Metav Werkzeuge for tailored advice on integrating the digital external probe M209.163 into existing inspection routines and to confirm delivery options and calibration certificates — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M209.163 GTIN: 4061905043864 Category: Dial gauges / measurement instruments Facts Measuring range: 20–40 mm Resolution: 0.005 mm Accuracy: ±0.03 mm Weight: 0.8 kg Special features Rounded contact tips R0.75 Rotatable digital display with ON/OFF/SET, ABS/INC/UNIT, TOL, MODE keys Delivered in a protective box FAQ What measurement tasks is this instrument best suited to? The digital external probe M209.163 is optimised for rapid external measurements such as grooves, collars and stepped diameters where a narrow 20–40 mm range and high display resolution support frequent inspection. How do resolution and accuracy differ on this gauge? Resolution (0.005 mm) describes the smallest increment shown on the display; accuracy (±0.03 mm) indicates the expected deviation of readings under normal conditions when using the M209.163. Are the contact tips suitable for delicate surfaces? Yes, the probe is fitted with rounded R0.75 tips which minimise local marking, making the instrument appropriate for softer finishes and delicate components. What is included with the delivery? The delivery of the M209.163 includes the instrument packaged in a protective box suitable for transport and initial storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-40mm Outside Quick Gauge 0.01mm Reading, Rounded Tips, Supplied in Case - Metav IndustryLine
Take advantage of precise, repeatable external measurements with a 0.01 mm reading and a 20–40 mm measuring range; the rounded R0.75 contact tips protect delicate surfaces while enabling fast groove checks. Order the gauge directly via Metav Werkzeuge or consult our advisors for application advice. Metav IndustryLine Outside Quick‑Contact Dial Gauge M209.063 — 20–40 mm, 0.01 mm The Metav IndustryLine Outside Quick‑Contact Dial Gauge M209.063 is a compact, analogue measuring instrument designed for rapid external groove and narrow-feature inspection in workshop and inspection environments. 0.01 mm resolution for fine readings 20–40 mm measuring range for narrow features Rounded tips R0.75 protect measured surfaces Analogue dial for immediate visual feedback Faster checks for external grooves and narrow profiles The quick‑contact mechanism is optimised for repetitive external measurements, reducing cycle time on inspection benches. With a 20–40 mm measuring span and a 0.01 mm scale, the gauge gives a clear, immediate indication suitable for pass/fail checks and comparative control tasks. The combination of fine resolution and a straightforward dial display supports faster decision making in quality control, helping to maintain production flow without complex setup. Reliable reading and industrial tolerance The instrument offers a mechanical reading step of 0.01 mm, paired with a stated accuracy of ±0.03 mm, which is appropriate for routine workshop inspection and process control. The analogue display reduces the need for batteries and electronics, providing a resilient solution in harsh environments. Operators unfamiliar with technical jargon will recognise the benefit of a direct, visible pointer movement for quick verification tasks. Contact geometry that protects the workpiece The measuring contacts feature R0.75 rounded tips, which distribute contact force and reduce marking on soft or finished surfaces. This geometry is particularly beneficial when checking grooves, edges and small external diameters where point loading can distort results. The rounded contacts improve repeatability of external checks while preserving component integrity during high‑frequency inspections. Simple mechanical operation and maintenance As a purely mechanical dial gauge, maintenance is straightforward: keep the contact faces clean and protect the instrument from severe impacts. The analogue construction means immediate readiness for use without electrical checks. For workshops seeking a robust, low‑complexity indicator for routine external checks, this solution offers longevity and predictable behaviour under continuous use. Integrating the gauge into inspection routines The instrument fits naturally into first‑article inspections, incoming goods checks and shop‑floor sampling plans where fast, comparable readings are needed. Its compact form factor and rapid response are advantageous when measuring narrow grooves on shafts, housings or small assemblies. The device supports consistent throughput and contributes to traceable measurement processes when recorded against sampling records. Practical advantage for everyday metrology Combining a fine 0.01 mm reading with a compact measuring range makes the instrument an efficient tool for targeted tasks: quick external groove checks, small‑feature verification and comparative measurements on production lines. The analogue nature, robust contact tips and simple handling reduce training time and promote steady measurement routines in busy workshops. For application advice or to request the Metav IndustryLine M209.063 for use in workshop inspection, contact Metav Werkzeuge in Emmerich for direct ordering and technical guidance. Technical data Article number: M209.063 GTIN: 4061905047008 Manufacturer: Metav IndustryLine Facts Measuring range: 20–40 mm Resolution (reading): 0.01 mm Accuracy: ±0.03 mm Contact radius: R0.75 Special features Analogue dial indication Designed for fast external groove measurement Rounded measuring tips for gentle contact Compact quick‑contact mechanism Category: Dial indicators (Messuhren) FAQ What measuring range does the gauge cover? The Metav IndustryLine Outside Quick‑Contact Dial Gauge M209.063 covers a measuring range of 20–40 mm. What resolution and accuracy can be expected? Resolution is 0.01 mm with a stated accuracy of ±0.03 mm, suitable for routine workshop inspections and comparative checks. Is the instrument suitable for delicate or finished surfaces? Yes. The rounded contact tips with an R0.75 radius reduce point loading and help protect delicate finishes during external measurements. Is this a digital instrument or analogue? This model is an analogue dial gauge with immediate pointer readout, designed for robust, battery‑free operation. Which typical tasks is the gauge designed for? The device is intended for fast checking of external grooves, small external diameters and narrow features on shafts, housings and assemblies (SKU M209.063). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200-500mm Adjustable Internal Setting Gauge With Variable Stop, Height And Width Adjustable, Supplied In Case - Metav IndustryLine
The combination of a wide 200–500 mm setting range, variable adjustable stop, and lapped measuring jaws enables repeatable and efficient calibration of internal gauges; this reduces setup time and increases throughput. Order the device directly via Metav Werkzeuge or consult our specialists for application-specific advice. Setting device for internal fine measuring instruments M208.032.1 — 200–500 mm adjustable calibration fixture (Metav IndustryLine) The Setting device for internal fine measuring instruments M208.032.1 is a portable calibration fixture designed to set and check internal dial and bore gauges over a 200–500 mm range, offering an adjustable stop and precise, lapped contact surfaces for consistent reference measurements. Range 200–500 mm for internal gauges Variable stop with height and width adjustment Lapped measuring jaws for consistent contact Supplied in a transport case Reliable master for internal gauge setting that speeds workflows This calibration fixture serves as a stable master for internal measuring instruments, providing a 200–500 mm adjustment span that covers medium to large bores often encountered in machining and assembly shops. The device reduces the number of intermediate setting steps by enabling direct reference at the required nominal dimension, which shortens cycle times and improves process consistency. The lapped measuring jaws ensure reproducible contact geometry, so each setting is based on a uniform reference surface rather than subjective feel. Designed for reproducible adjustment with flexible stops A key benefit is the variable stop that allows both height and width to be adapted to the gauge stem and contact geometry, enabling fine tuning without additional adapters. The unit features a defined adjustment depth of 55 mm, which keeps the contact interface stable and limits bending moments on slender gauge stems. These design choices translate into lower measurement scatter and fewer re-checks, making the fixture a practical tool for quality control benches and set-up areas. Solid handling and transport for shop-floor use Built for workshop environments, the device weighs approximately 6.6 kg, providing a balance between portability and mass for vibration damping during adjustment. It is supplied in a transport case, protecting the instrument and its lapped jaws during storage and transit. The included contact jaws (dimensions 9 × 19 × 100 mm) are lapped to give an even seating surface that minimises point contacts and ensures stable datum formation during each calibration run. Practical compatibility and application scenarios The fixture integrates easily into existing inspection routines for dial and bore gauges and pairs well with standard dial indicators and internal gauge heads. It is particularly suitable where repeatable gauge setting is required for batches of similar components, for first-article inspections, and for in-process checks. The robust contact surfaces and adjustable stop reduce the influence of operator pressure and positioning, so more consistent gauge behaviour is achieved across different users. Discuss specification and delivery options with Metav Werkzeuge — our Metav IndustryLine consultants can advise on integration and local delivery from Emmerich Technical data Article number: M208.032.1 GTIN: 4061905045615 Brand: Metav IndustryLine Category: Dial gauges / Gauge setting devices Weight: 6.6 kg Facts Measuring range: 200–500 mm Adjustment depth: 55 mm Jaw dimensions: 9 × 19 × 100 mm Special features Variable stop; height and width adjustable Measuring jaws lapped for uniform contact Supplied in a transport case for transport protection Designed for setting internal dial and bore gauges FAQ What measurement range does the fixture cover? The fixture covers a 200–500 mm range, which is suitable for medium to large internal measurements and gauge setting tasks. Can the device be used with standard internal dial gauges? Yes, the setting device is designed to accommodate standard internal dial and bore gauges; the adjustable stop helps adapt to different gauge head geometries. How are the contact surfaces prepared for accuracy? The contact jaws are lapped, providing a consistently flat and repeatable seating surface to improve reproducibility during gauge setting. Is the device ready for safe transport and storage? The unit is supplied in a transport case, protecting the instrument and its jaws during storage and movement between workstations. Which model and brand should be referenced when ordering or enquiring? Refer to the Metav IndustryLine setting device, model M208.032.1, when contacting sales or specifying the fixture in purchase orders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Digital Outside Probe With 0.005mm Resolution, Rotating Digital Readout, Round Tips, Supplied In Case - Metav IndustryLine
Take advantage of the compact 0–20 mm measuring range and 0.005 mm resolution for fast, repeatable external groove checks; the rotatable digital display and rounded R0.75 probe tips make setup and access easier in confined spaces. Supplied in a protective transport case, the instrument supports efficient workshop workflows — order the digital outside probe directly via Metav Werkzeuge or ask our consultants for advice. Digital outside probe M209.151 — compact digital test indicator, 0–20 mm range, 0.005 mm resolution (Metav IndustryLine) A Digital outside probe 0–20 mm designed for quick external and groove measurements in machine shops and inspection benches, combining compact form with a rotatable digital display for flexible readout. High resolution 0.005 mm reading Rotatable digital display with multiple functions Rounded probe tips R0.75 for groove measurement Supplied in protective transport case Precision that can be trusted in everyday inspection The instrument delivers a measuring range of 0–20 mm with a fine resolution of 0.005 mm, enabling precise detection of small variations in external features. The specified measurement accuracy of ±0.03 mm places this probe within the reliable tolerance class for many workshop inspection tasks. Because the unit is a compact, digitally driven test indicator, it removes ambiguity from analogue readings and accelerates decision-making on the shop floor. The short probe geometry and rounded R0.75 tips are purpose-built for quick groove checks and external measurements where access and repeatability matter. Built for efficient handling and straightforward operation A rotatable digital display provides flexible visibility in tight set-ups, while the control cluster (ON/OFF/SET, ABS/INC/UNIT, TOL, DATA, MODE) lets operators change modes and units without dismounting the instrument. The device’s compact dimensions and balanced weight support steady one-handed positioning, reducing operator-induced variation and speeding measurement cycles. Supplied in a protective transport case, the probe is ready for workshop routines and safe storage during transport. This combination of ergonomic display, concise controls and protective packaging is tailored to keep inspection throughput high and handling simple. Practical integration and application-focused design Engineered for outside measurements and fast checks of external grooves, the instrument fits inspection benches, toolrooms and maintenance departments that prioritise repeatable, quick checks over long-range measurement. The digital format avoids parallax and reading errors, while the rounded tips minimise damage when probing narrow grooves. Although the unit includes a DATA-labelled button on the display, the description does not specify an external data interface; the control set nonetheless supports tolerance checks and incremental or absolute measuring modes for immediate pass/fail evaluation. Classified in the micro measuring range (measuring range up to 100 mm), this probe couples high local precision with workshop robustness. For reliable high-resolution groove checks with the Metav IndustryLine digital outside probe, contact Metav Werkzeuge in Emmerich for tailored advice and delivery from our European quality hub: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M209.151 GTIN: 4061905043659 Product: Digital outside probe, 0–20 mm, resolution 0.005 mm Brand: Metav IndustryLine Key numerical data Measuring range: 0–20 mm Resolution: 0.005 mm Accuracy: ±0.03 mm Weight: 0.8 kg Probe tip radius: R0.75 Design and special features Rotatable digital display with ON/OFF/SET, ABS/INC/UNIT, TOL, DATA, MODE keys Suitable for outside measurements and quick groove checks Rounded probe tips for narrow grooves Supplied in a protective transport case for transport FAQ What measuring range and resolution does the probe offer? The digital outside probe provides a measuring range of 0–20 mm with a resolution of 0.005 mm, suitable for fine external checks. Is the instrument accurate enough for workshop inspection tasks? Yes, the specified accuracy of ±0.03 mm makes the probe appropriate for many machine‑shop and inspection applications where reproducible external measurements are required. Can the probe be used for groove and narrow-slot measurements? The rounded R0.75 probe tips are designed specifically for groove and slot checks, making the instrument well-suited for such tasks. Does the display support tolerance checks and different measuring modes? The rotatable digital display includes controls for ABS/INC/UNIT and TOL, enabling absolute/incremental readings and basic tolerance monitoring directly at the instrument. How is the instrument supplied and protected during transport? The probe is supplied in a protective transport case to safeguard the instrument during shipping and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Outside Quick-Point Gauge With Rounded Tips 0.01mm Resolution, Case - Metav IndustryLine
Take advantage of precise 0.01 mm graduation and a compact 0–20 mm measuring range for fast, repeatable checks of external grooves. Combined with a robust R0.75 contact tip and mechanical dial readout, the instrument speeds up inspection cycles and reduces rework. Order via Metav Werkzeuge or consult our experts for application advice. External quick-contact dial gauge 0–20 mm, 0.01 mm — Metav IndustryLine The External quick-contact dial gauge 0–20 mm, 0.01 mm is a mechanical dial indicator engineered for rapid measurement of external grooves, slots and narrow features in workshop and production environments. Rapid measurement of external grooves 0.01 mm graduation for fine resolution Hardened round contact tips R0.75 Mechanical dial with 0.01 mm readout Faster groove checks, less downtime This gauge is configured to make external measurements quickly and reliably. The fine 0.01 mm graduation combined with a compact 0–20 mm range concentrates measuring capability where it is needed for slot and groove inspection, reducing the number of tool changes and the overall cycle time. The compact contact geometry helps access narrow features while the R0.75 rounded tips protect delicate edges during repeated probing. Mechanical clarity for robust workshop use An analog dial readout offers straightforward visual feedback without electronics, favouring environments where simplicity and immediate readability are priorities. The instrument’s indicated accuracy of ±0.03 mm and mechanical construction balance repeatability with ease of use, making it suitable for routine quality control on the shop floor as well as for bench inspections where fast decisions are required. Practical quality control benefits Designed for machinists and inspection technicians, the gauge translates its features into measurable shop-floor advantages: faster setup checks, clear pass/fail assessment and reduced measuring ambiguity compared with slower methods. The mechanical dial and defined contact radius make it easier to standardise measurement technique across operators, improving process consistency and traceability in batch production. Built for everyday measurement tasks Durability and low maintenance are core to the design: hardened contact tips and a mechanically simple dial minimise service needs while keeping measurement uncertainty low. The device’s weight and balance support stable handling for repetitive measurements, and the construction is tailored to withstand routine workshop handling without compromising readout clarity. Contact Metav Werkzeuge for tailored advice on Metav IndustryLine dial gauges — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific groove and slot inspections Technical Data Article number: M209.051 GTIN: 4061905046810 Brand: Metav IndustryLine Facts Measuring range: 0–20 mm Graduation / Resolution: 0.01 mm Indicated accuracy: 0.03 mm Weight: 0.8 kg Readout: analog dial Special features Contact tip radius: R0.75 Designed for rapid measurement of external grooves Mechanical construction with 0.01 mm dial face Suitable for workshop measurement and inspection FAQ What measuring range does this gauge cover? The instrument covers a measuring range of 0–20 mm, making it appropriate for small external grooves and narrow features. What resolution and accuracy can be expected? Resolution is 0.01 mm with an indicated accuracy of approximately ±0.03 mm on the mechanical dial. Is the contact tip geometry suitable for narrow slots? Yes, the rounded contact tip with R0.75 radius is intended to access and measure narrow grooves while reducing edge damage. Can this gauge be used at the inspection bench and on the shop floor? The mechanical dial design is well suited to both bench inspection and robust shop-floor use where electronic readouts are not desired. What is the manufacturer and article number for ordering? The gauge is part of the Metav IndustryLine range, article number M209.051. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20–40mm Internal Quick-Contact Gauge 0.01mm Graduation With Round Tips, Supplied In Case - Metav IndustryLine
Take advantage of fast internal checks, 0.01 mm resolution and repeatable accuracy of ±0.03 mm for efficient quality control; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. M209.033 Internal Quick‑Action Dial Gauge – 20–40 mm, 0.01 mm resolution (Metav IndustryLine) The M209.033 Internal Quick‑Action Dial Gauge is a compact analogue instrument designed for rapid inspection of internal features such as bores and grooves in workshop and inspection environments. Internal quick-action measurement 20–40 mm Fine resolution 0.01 mm for precise checks Accuracy ±0.03 mm for consistent results Rounded contact tips R0.5 for sensitive surfaces Faster internal checks to speed up inspection workflows For routine verification of bores, slots and grooves the instrument delivers swift contact and immediate visual feedback. The analogue dial gauge layout with a quick‑action contact allows operators to complete repetitive internal measurements faster than with separate probe setups, reducing cycle time on the shop floor. The compact measurement span of 20–40 mm matches common small‑bore tasks in production and maintenance, enabling quick sorting between acceptable and out‑of‑tolerance parts without complex fixturing. Precision that supports reliable decisions With a reading step of 0.01 mm and declared accuracy of ±0.03 mm, this device provides a balance between fine resolution and industrial robustness. The mechanical construction minimises backlash and supplies repeatable indications suitable for in‑process checks and first‑off inspection. Where microscopic deviations matter, the clear analogue scale helps technicians see trends at a glance and decide on corrective action, while the instrument’s specification ensures results that are compatible with typical workshop tolerances. Gentle contact for delicate interior finishes The measuring contacts are shaped as rounded contact tips (R0.5) to prevent marking or damaging sensitive surfaces inside bores and grooves. This tip geometry supports measurement of finished components and soft materials while maintaining stable contact. The gentle interface is particularly useful when checking components with plated or polished bores, preserving surface integrity during inspection and helping to avoid rework caused by measurement damage. Built for everyday workshop handling Engineered as an analogue, quick‑action tool, this internal gauge is straightforward to use and robust in daily operation. The construction favours frequent handling and easy resetting between measurements, while the clear dial face gives unambiguous readings for fast decision‑making at the bench. Its design supports standard inspection routines and complements other dial indicators and gauges in a metrology kit, making it a practical choice for production, maintenance and quality departments. Contact Metav Werkzeuge in Emmerich for tailored advice on the M209.033 internal quick‑action dial gauge and to discuss delivery options; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M209.033 GTIN: 4061905045523 Manufacturer: Metav IndustryLine Facts Measuring range: 20–40 mm Resolution / reading: 0.01 mm Accuracy: ±0.03 mm Weight: 0.8 kg Tip radius: R0.5 Display: Analogue Special features Application: fast measurement of bores and grooves Contact geometry: rounded tips for sensitive surfaces Category: dial indicators Eclass: 27144044 ETIM: EC000029 FAQ What internal dimensions can be checked with this gauge? The M209.033 internal quick‑action dial gauge covers a measuring span of 20–40 mm, making it suitable for small bores, grooves and internal features within that range. How fine are the readings and how repeatable are they? This instrument offers a reading step of 0.01 mm and a declared accuracy of ±0.03 mm, delivering fine resolution and repeatable indications for routine workshop inspections. Are the contact tips suitable for finished components? Yes, the gauge is fitted with rounded contact tips (R0.5) designed to avoid marking and to protect polished or plated internal surfaces during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250-450mm Inside Micrometer With Carbide Measuring Faces 0.01mm Resolution - Microtech Metrology
Take advantage of precise analogue readings, carbide measuring faces and a broad working span to keep inspection routines efficient; the instrument’s 0.01 mm resolution and ±0.022 mm reproducibility make it a practical choice for medium‑range internal measurements. Order the internal dial bore gauge directly via Metav Werkzeuge or ask our consultants for application advice. Internal dial bore gauge — analogue, 250–450 mm range (Microtech Metrology) Internal dial bore gauge for accurate internal measurements of medium-sized components using a robust analogue dial indicator. Analogue dial with 0.01 mm resolution Carbide measuring faces for long tool life Measuring range 250–450 mm Measurement depth 260 mm Consistent bore readings for repeatable quality An analogue measuring instrument with a fine 0.01 mm resolution provides direct, immediate feedback during in‑process checks. The declared reproducibility of ±0.022 mm gives a clear expectation of measurement spread and supports statistical control in small‑batch production. Carbide contact surfaces reduce wear at the contact points, so the gauge maintains its reference geometry over prolonged use; this keeps maintenance intervals predictable and helps sustain measurement reliability without frequent replacements. Medium-range coverage that reduces set‑ups and saves time With a measuring range of 250–450 mm and a measurement depth of 260 mm, the device covers a practical span for fixtures, housings and larger bores encountered in jigs and medium assemblies. Classified as a medium‑range instrument, it reduces the need for multiple narrow‑range tools and shortens changeover time when batches include different diameters. The analogue dial design keeps the inspection process straightforward and avoids workflow interruptions that can arise from more complex electronic setups. Workshop‑ready design that supports efficient inspection routines A mechanically reliable dial indicator and carbide measuring faces create a robust tool for routine quality control and bench verification. The instrument’s simple reading principle is advantageous where clear visual indication and rapid decisions are required; staff training is minimal and measurement throughput remains high. For users seeking additional technical information or integration tips, Metav Werkzeuge supplies detailed specifications and application guidance to align the instrument with existing quality procedures. Contact Metav Werkzeuge for tailored advice on the Microtech Metrology internal dial bore gauge (SKU 132450100) and secure reliable measurement performance for workshop inspection tasks Technical data Article number: 132450100 GTIN: 4061905453915 Manufacturer: Microtech Metrology Category: Feinmessgeräte Analogue: yes Facts Measuring range: 250 mm – 450 mm Resolution: 0.01 mm Reproducibility / accuracy: ±0.022 mm Measurement depth: 260 mm Special features Carbide measuring faces Analogue dial indicator Intended for internal (bore) measurements Suitable for medium‑range inspection tasks FAQ What measurement span does this instrument cover? The internal dial bore gauge (Microtech Metrology, SKU 132450100) covers a measuring range from 250 mm to 450 mm and offers a measurement depth of 260 mm. How precise are the readings from this analogue gauge? Readings are taken to 0.01 mm resolution with a stated reproducibility of ±0.022 mm for the Microtech Metrology internal dial bore gauge (SKU 132450100). Are the contact faces wear‑resistant for regular shop use? Yes, the instrument is supplied with carbide measuring faces, which provide improved wear resistance and a longer service life under standard workshop conditions. Is the gauge suitable for measuring deep bores and larger housings? The instrument’s 260 mm measurement depth makes it appropriate for deeper internal features within its 250–450 mm range; it is designed for medium‑sized bores and assembly components. Can this analogue gauge be used for in‑process checks on the shop floor? The straightforward dial display and robust contacts make the Microtech Metrology internal dial bore gauge (SKU 132450100) well suited to routine in‑process inspections and quick bench verifications. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Inside Micrometer With Retractable Measuring Head, Colour 1.5" Touchscreen, Wireless/USB ISO 17025 - Microtech Metrology
Take advantage of the combination of precise digital measurement, dependable data transfer and factory calibration for reproducible inspection results. The retractable measuring head and included support set simplify handling of internal features while the ISO 17025 calibration certificate confirms traceable accuracy. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Internal Fine Measuring Instrument — digital internal gauge with retractable measuring head and wireless/USB connectivity Microtech Internal Fine Measuring Instrument is a digital internal measuring instrument designed for mid-range workshop and production inspection of bore diameters and internal profiles between 250 and 450 mm Retractable measuring head for confined bores Colour 1.5" touchscreen display Wireless and USB data output ISO 17025 calibration certificate included Delivered with support set Precision where repeatability matters This digital fine measuring instrument delivers a stable measuring workflow thanks to its retractable measuring head, which eases insertion and alignment in confined bores. Classified as a medium-range device (300–500 mm category), it combines reach with mechanical stiffness to avoid deflection during measurement, making it suitable for larger spindle housings, fittings and assemblies. The instrument’s stated accuracy of ±0.037 (as provided) and fine display resolution ensure that recorded values are directly comparable across inspection cycles, supporting consistent quality decisions on the shop floor or in the measuring room. Reliable data transfer and integration into inspection processes Equipped with Wireless and USB outputs and a Colour 1.5" touchscreen, the instrument supports both immediate readings and digital logging for statistical process control. Wireless transmission allows integration into data-collection software without repeated manual transcription, while USB offers a straightforward backup route for traceable records. Together these interfaces reduce transcription error and speed up documentation, yielding time savings in batch inspections and easier handover to quality management systems. Ready for calibrated, production-grade use The tool is supplied with a factory ISO 17025 calibration certificate, confirming full calibration to an accredited standard; the certificate accompanies the instrument and sets a verifiable baseline for metrological traceability. Delivered with a support set, the package is prepared for immediate use and practical handling during internal measurements. For teams that value documentation and regulatory compliance, the certified calibration and digital output capability combine to streamline audit preparation and long-term quality assurance. Contact Metav Werkzeuge for tailored advice and to arrange supply of this Microtech Metrology internal fine measuring instrument with its ISO 17025 calibration certificate and support set Technical Data Article number: 131450795 GTIN: 4061905044113 Manufacturer: Microtech Metrology Facts Measurement range: 250–450 mm Resolution (display): 0.0001 Accuracy: 0.037 Display: Colour 1.5" touchscreen Data output: Wireless, USB Special features Retractable measuring head Delivered with support set ISO 17025 calibration certificate included Digital internal fine measuring instrument (internal gauge) Measurement depth: 10000 FAQ What measurement range does this instrument cover? The instrument covers a measurement range from 250 to 450 mm and is classified as a medium-range internal measuring device suitable for larger bores and assemblies. Is a calibration certificate supplied with the instrument? Yes, the device is delivered fully calibrated and includes an ISO 17025 calibration certificate as supplied by Microtech Metrology. How are measurements exported for documentation? Measurements can be exported via the instrument’s Wireless interface for networked logging or by USB for direct data transfer to a PC or data-collection device. What is the benefit of the retractable measuring head? The retractable measuring head facilitates insertion into confined bores and reduces the risk of contact damage, improving alignment and repeatability during internal measurements. Which SKU should be referenced for ordering or spare parts? Reference SKU 131450795 when specifying the Microtech Metrology internal fine measuring instrument in orders or inquiries. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Fine Measuring Gauge Carbide Measuring Faces Color 1.54" Touchscreen Wireless USB - Microtech Metrology
Combine measuring range 250–450 mm, carbide measuring faces and accuracy ±0.008 mm for consistent internal inspections; order directly from Metav Werkzeuge or consult our specialists for application advice. Internal precision gauge — Microtech Metrology, medium-range instrument with touchscreen and wireless data output The Internal precision gauge is designed for accurate internal measurements of medium-sized components in inspection, toolmaking and production monitoring. 250–450 mm measuring range Carbide measuring faces for wear resistance 1.54" colour touchscreen for intuitive use Wireless + USB data output for easy integration Consistent precision for medium-sized components Classified as a medium-range instrument (suitable for measuring up to 450 mm), this internal fine measuring device balances reach and rigidity to support everyday shop-floor inspection tasks. Its stated accuracy ±0.008 mm places it above common handheld gauges, delivering reliably repeatable readings for bore, seat and internal form checks. The combination of fine resolution (display increment 0.0001) and a robust measuring concept reduces uncertainty in routine quality control, enabling faster go/no-go decisions without sacrificing traceability. Durable contact surfaces and extended reach reduce rework Equipped with carbide measuring faces, the instrument resists wear from repeated contact and abrasive surfaces, which helps to maintain measurement consistency over long production runs. The 250–450 mm measuring range and notable measuring depth 1000 mm allow access to deeper bores and recessed features that shorter tools cannot reach. Reduced surface wear and the extended reach mean fewer repeat measurements and less downtime for recalibration, supporting higher throughput in component inspection and assembly operations. Intuitive operation and seamless data capture for efficient workflows A 1.54" colour touchscreen delivers an immediate visual readout and straightforward control, while the Wireless + USB data interfaces simplify transfer of measurement logs into inspection software or quality databases. This digital readiness cuts manual transcription errors and shortens reporting cycles, so results move from the bench to the quality system with minimal handling. Manufactured by a specialist metrology brand, the unit is engineered to fit into modern data-driven inspection processes and to support traceable record-keeping in production environments. Contact Metav Werkzeuge in Emmerich to discuss how the Microtech internal precision gauge integrates into existing inspection routines or to request the detailed specification: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 132450722 GTIN: 4061905453625 Manufacturer: Microtech Metrology ECLASS: 21170310 Facts Measuring range: 250–450 mm Measuring depth: 1000 mm Accuracy: ±0.008 mm Display increment: 0.0001 Display type: Colour 1.54" touchscreen Special features Carbide measuring faces Data output: Wireless + USB Analogue readout available Category: Fine measuring instruments FAQ What measuring tasks is this instrument best suited for? The internal precision gauge from Microtech Metrology is optimised for internal diameter, bore depth and step measurements on medium-sized components within the 250–450 mm range, making it suitable for toolrooms and production inspection. How accurate is the device in everyday use? The device specifies an accuracy of ±0.008 mm; in practical terms this supports tighter tolerances than standard handheld gauges and is appropriate for detailed quality control where repeatability matters. Which data interfaces are available for automated logging? Data can be exported via Wireless + USB connections; the interface options support simple integration into inspection workflows and digital quality records for the SKU 132450722. Are the measuring faces suitable for abrasive environments? Yes, the gauge is fitted with carbide measuring faces, which provide enhanced wear resistance and improved longevity in abrasive or high-cycle applications. Can this instrument reach deep or recessed features? With a measuring depth of 1000 mm and a measuring range of 250–450 mm, the instrument is designed to access deeper bores and recessed geometries that shorter measuring tools cannot inspect. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Fine Measuring Instrument With Retractable Probe Digital 0.001mm Resolution ISO 17025 Calibrated - Microtech Metrology
Combine digital measurement with a 250–450 mm measuring range and a traceable ISO 17025 calibration for dependable internal dimension checks; order via Metav Werkzeuge or consult our specialists for tailored advice. Microtech Metrology Internal Precision Gauge — Digital instrument for internal diameter measurement, 250–450 mm range The Internal Precision Gauge is a digital fine measuring instrument designed for precise internal diameter and bore checks in machining and quality inspection, covering a measuring range from 250–450 mm. Digital reading with 0.001 mm resolution Measuring range 250–450 mm Accuracy ±0.035 mm Delivered with ISO 17025 calibration certificate Consistent, measurable performance for internal dimensions The instrument is engineered for reproducible internal measurements where repeatability matters. A digital display with a 0.001 mm reading resolution provides clearly legible results that reduce interpretation errors common with analogue scales. With an accuracy of ±0.035 mm, the gauge suits standard workshop quality control and production checks, enabling faster decision-making on the shop floor. The combination of high resolution and defined accuracy supports traceable records for inspection reports and reduces rework caused by uncertain measurements. Traceable calibration that supports quality systems Calibration has been carried out according to ISO 17025, and a certified calibration document is included with delivery, guaranteeing traceability and audit readiness. This certification ensures the measuring chain is validated for internal diameter inspection and is recognised in quality management routines. The supply process is supported by a European quality filter based in Emmerich, which helps to maintain consistent product compliance for workshops and small production lines. Such documented traceability simplifies acceptance into documented inspection processes. Practical application in machining and metrology workflows Adapted to bore and pocket measurements in component manufacture, the gauge is suitable for use in machine shops, toolrooms and inspection benches where internal diameters between 250–450 mm occur. The instrument’s design focuses on clear electronic readout and stable measurement conditions, which helps to avoid operator-induced variability. Because the device is a digital internal measuring instrument, results can be recorded directly for quality logs or transcribed into inspection software, improving throughput in serial inspection tasks. For reliable, calibrated internal measurement equipment from Microtech Metrology, contact Metav Werkzeuge in Emmerich for product details and ordering assistance; our consultants are available to advise on suitability and integration into existing inspection routines. Technical data Article number: 139450833 GTIN: 4061905046896 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 250–450 mm Resolution (reading): 0.001 mm Accuracy: ±0.035 mm Measuring depth: 3000 mm Designs / Special features Digital electronic display ISO 17025 calibration and certificate included Category: fine measuring instruments FAQ Is the instrument supplied with a calibration certificate? The instrument is delivered with an ISO 17025 calibration certificate, confirming traceable verification of the measuring chain. What measurement range is covered and what is it suitable for? The device covers a 250–450 mm measuring range, making it suitable for internal diameter and bore inspections in machining and quality control. What resolution and accuracy can be expected during routine checks? The gauge offers a 0.001 mm reading resolution with a specified accuracy of ±0.035 mm, appropriate for standard workshop and production inspections. Can measurement results be used directly in quality documentation? Yes, the clear digital readout and traceable calibration make readings suitable for inclusion in inspection reports and quality records. Who manufactures this instrument and what is the article number? The instrument is manufactured by Microtech Metrology and is listed under article number 139450833. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer Carbide Measuring Faces Analog 0.008mm Resolution - Microtech Metrology
Benefit from the combination of 0.001 mm resolution, ±0.008 mm accuracy and carbide measuring faces for consistently reproducible internal measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Metrology internal fine measuring gauge — analogue dial, 0.001 mm reading, carbide faces The internal fine measuring gauge by Microtech Metrology is a workshop and metrology instrument for precise internal diameter measurements across a medium range, suitable for components in fixtures, housings and medium-sized assemblies. 0.001 mm resolution reading ±0.008 mm measurement accuracy Carbide measuring faces for durability Measuring range 250–450 mm Precision where it matters: fine graduations for reliable decisions The analogue mechanism delivers a 0.001 mm reading combined with a stated ±0.008 mm accuracy, which provides a clear technical basis for quality control and pass/fail decisions. This level of resolution allows differentiation between tight tolerance classes while the quoted accuracy supports traceable results in routine inspections. For production environments where repeatable internal diameters are essential, the fine graduation reduces ambiguity during visual reading and speeds up inspection cycles. Robust contact and sustained repeatability under shop conditions Hard-wearing carbide measuring faces protect contact surfaces from wear, thereby preserving measurement integrity over prolonged use and reducing rework costs. With a measuring range extending to 450 mm, the instrument aligns with medium-range internal measurement tasks encountered in mould and fixture manufacture; this reach avoids frequent tool changes and increases throughput. The combination of wear-resistant faces and stable mechanical guidance ensures consistent readings across repeated measurements. Practical handling and integration for workshop workflows The analogue display keeps the operation straightforward and tactile, which benefits technicians who favour direct feedback over electronic menus. The instrument’s measuring depth specification supports access to deeper bores and stepped geometries, while the clear dial scale aids fast decision-making at the bench. Designed as a fine measuring tool for regular inspection routines, it complements existing metrology sets and provides immediate value in machine shops and maintenance departments. Contact Metav Werkzeuge for expert advice on Microtech Metrology precision internal gauges and to arrange supply from our Emmerich stock Technical data SKU: 132450844 GTIN: 4061905453939 Manufacturer: Microtech Metrology ECLASS: 21170310 Core data Measuring range: 250–450 mm Resolution (reading): 0.001 mm Stated accuracy: ±0.008 mm Measuring depth: 2000 mm Special features Carbide measuring faces Analogue dial operation Category: Fine measuring instrument FAQ What measuring range does the instrument cover? The internal fine measuring gauge covers a measuring range of 250–450 mm, making it suitable for medium-range internal measurements. What resolution and accuracy can be expected? The instrument provides a 0.001 mm reading and a stated accuracy of ±0.008 mm, offering fine resolution for workshop-level quality control. Are the contact faces suitable for high-use environments? Yes, the carbide measuring faces on the Microtech Metrology internal fine measuring gauge resist wear and support long-term repeatability. Is the device analogue or digital? This is an analogue dial instrument that provides tactile feedback and a precise mechanical indication with fine graduations. Can it reach deep bores or stepped internal geometries? The specified measuring depth supports access to deeper bores and stepped features typically encountered in fixtures and housings. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer Carbide Measuring Faces, 0.0001" Resolution Wireless/USB - Microtech Metrology
Take advantage of the combination of high measurement accuracy, robust carbide measuring faces and modern data transfer for reliable bore inspection in production environments; order the instrument directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Internal Fine Measuring Instrument by Microtech Metrology — 250–450 mm range, carbide measuring faces The Internal Fine Measuring Instrument is a medium‑range precision gauge designed for internal bore measurement and dimensional inspection in machine shops and metrology laboratories. Carbide measuring faces for long service life 250–450 mm measuring range for medium assemblies Accuracy ±0.008 mm for repeatable results Wireless + USB data output for traceable workflows Precise internal measurement where repeatability matters The instrument delivers a clear metrological advantage through a stated accuracy of ±0.008 mm, which supports consistent quality control on medium‑sized components. With a measuring range of 250–450 mm and a measuring depth of 260 mm, it addresses the common needs of fixture, housing and bore inspection without compromising rigidity. The carbide measuring faces reduce wear and maintain measurement fidelity over repeated cycles, turning initial calibration effort into long‑term stability. Practical explanations: the quoted accuracy is the maximum expected deviation under standard conditions — lower variability in the production chain reduces scrap rates and rework. Modern data handling for streamlined processes Equipped with a colour 1.54" touchscreen and Wireless + USB interfaces, the device supports immediate readout, data capture and transfer to SPC or quality management systems. The hybrid analogue–digital layout combines a familiar mechanical indication with a responsive digital display, enabling technicians to cross‑check values at the bench and to log results digitally for traceability. Wireless transfer reduces manual transcription errors and accelerates batch documentation; USB connectivity provides a reliable wired option for secure data export. Designed for workshop conditions and medium‑range inspection Classified as a medium‑range internal gauge (suitable for applications up to 450 mm), the tool balances reach and stiffness to remain user‑friendly while measuring larger bore geometries. The robust construction and carbide contact faces make it suitable for routine shop floor use, where durability and low maintenance deliver better uptime. The combination of tactile analogue feedback and a modern touchscreen supports both experienced inspectors and teams adopting digital inspection routines, improving process acceptance and operator confidence. Contact Metav Werkzeuge for detailed technical advice on integrating Microtech Metrology measuring solutions into existing inspection workflows or to request a tailored specification sheet for this internal gauge. Technical data SKU: 132450700 GTIN: 4061905453618 Manufacturer: Microtech Metrology Accuracy: ±0.008 mm Measuring range: 250–450 mm Measuring depth: 260 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Carbide measuring faces (HM) Hybrid analogue–digital instrument Medium‑range internal gauge suitable for workshops and metrology labs FAQ What is the stated measurement accuracy of this instrument? The instrument offers an accuracy of ±0.008 mm as specified for the Microtech Metrology internal fine measuring instrument (SKU 132450700), suitable for consistent medium‑range inspections. How is data exported from the device? Measurement results can be transferred via the Wireless + USB interfaces; both wireless logging and a wired USB connection are supported for secure data capture. Which measuring range and depth does the gauge cover? The device covers a measuring range of 250–450 mm with a measuring depth of 260 mm, classifying it as a medium‑range internal gauge for larger bores. Are the measuring faces suitable for shop floor use? Yes, the gauge uses carbide measuring faces, which provide wear resistance and long service life under routine inspection conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer Colour 1.5" Touchscreen Wireless/USB ISO 17025 Calibrated - Microtech Metrology
Reliable inspection results, fast data transfer and full traceability are provided by the combination of ±0.02 mm accuracy, Wireless+USB connectivity and a supplied ISO 17025 calibration certificate — ideal for medium‑range internal measurements. Order the inside fine measuring instrument directly via Metav Werkzeuge or ask our consultants if needed. Microtech Inside Fine Measuring Instrument — Digital internal gauge, Wireless+USB, 250–450 mm The Inside fine measuring instrument by Microtech Metrology is a digital internal measuring system designed for medium‑range workshop and quality‑control tasks, combining precision measurement with direct data capture. 250–450 mm measuring range ±0.02 mm accuracy for reliable results Wireless+USB data output for fast transfer 1.5" colour touchscreen display Precise, repeatable internal measurement for production control The instrument delivers industrial precision with an accuracy of ±0.02 mm, which places it firmly in the class used for standard workshop quality control and fine mechanical inspection. Its 250–450 mm measuring range corresponds to the "Mittel" category for calipers, offering the best compromise between reach and stiffness for components such as housings, mounts and medium‑sized bores. Thanks to the stable digital readout and proven measurement electronics, the gauge reduces variability from manual interpretation and supports repeatable inspection routines that keep production tolerances consistent. Faster workflows through modern connectivity and a clear display Integration with measurement data systems is simplified by the combined Wireless+USB output and a responsive 1.5" colour touchscreen. The digital output enables direct logging of results into a quality database or a spreadsheet, eliminating transcription errors and accelerating statistical process control. The touchscreen provides immediate visual confirmation of the measured value and simple menu navigation, which shortens the time per measurement and makes the device suitable for both bench operators and bench‑level quality engineers. Calibrated traceability and workshop readiness This measuring device is supplied fully calibrated under ISO 17025 and includes a calibration certificate, delivering documented traceability for audits and conformity checks. The factory calibration supports immediate use in inspection plans and reduces setup time for incoming goods or final inspection. Built with three modular elements, the system offers configurability that adapts to common internal measurement tasks while maintaining measurement consistency across repeated checks. Such documented precision supports compliance, reduces rework and strengthens supplier quality assurance. Contact Metav Werkzeuge for tailored advice on integrating this Microtech instrument into existing inspection processes and to obtain the calibrated unit with certification. Technical data Article number: 131450755 GTIN: 4061905046797 Manufacturer: Microtech Metrology Category: Feinmessgeräte Digital display: Colour 1.5" touchscreen Data output: Wireless+USB Facts Measuring range: 250–450 mm Accuracy: ±0.02 mm Modules: 3 Digital: true ISO 17025 calibrated: yes Special features Wireless+USB data transmission ISO 17025 calibration certificate included 1.5" colour touchscreen for clear readout Intended for medium‑range internal measurements (Mittel) Supplied ready for workshop and quality‑lab use FAQ What measuring range does the instrument cover? The inside fine measuring instrument covers a measuring range of 250–450 mm, suitable for medium‑sized internal features. How accurate is the gauge for inspection tasks? The instrument provides an accuracy of ±0.02 mm, which supports reliable workshop quality checks and routine production control. Is a calibration certificate included with the device? Yes, the device is supplied fully calibrated to ISO 17025 and comes with the corresponding calibration certificate. How can measurement data be exported? Measurement results can be exported via the combined Wireless+USB interface for direct logging into quality systems or spreadsheets. Who manufactures this instrument? This internal measuring instrument is manufactured by Microtech Metrology and is designed for precision inspection tasks in workshops and laboratories. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer Retractable Measuring Head Digital 0.001mm Resolution ISO 17025 Cal Cert - Microtech Metrology
Take advantage of certified accuracy and a medium measuring range for reliable internal measurements; the included ISO 17025 calibration certificate ensures traceable results, while Metav Werkzeuge provides expert ordering and consultancy for seamless integration. Internal fine measuring instrument — digital internal gauge, ISO 17025 calibrated (Microtech Metrology) The Internal fine measuring instrument is a digital internal gauge designed for precise internal measurements of medium-sized components in jig, mould and assembly inspection. ISO 17025-calibrated with certificate included Accuracy ±0.03 mm for reproducible results Measuring range 250–450 mm for medium assemblies Digital readout for fast, unambiguous readings Precision for medium-range internal measurements Classified for the medium category, this instrument covers a 250–450 mm measuring range that balances reach and rigidity for workshop and production use. The geometry and scale of the device are optimised for internal dimensions of jigs, housings and bearings where repeatable results are essential; the medium class offers better stiffness than compact variants while remaining manageable for single-person handling. The digital display and mechanical guidance reduce interpretation errors, which results in more consistent quality checks and fewer rework cycles. Traceable results via accredited calibration Delivered fully calibrated to ISO 17025, the instrument includes an official calibration certificate that documents traceability and measurement uncertainty. This formal accreditation confirms that the tool was checked against national standards and is suitable for contractual inspection or quality-control logs. With an indicated accuracy of ±0.03 mm, the device is appropriate for standard industrial tolerances; the calibration ensures that the stated uncertainty is backed by certified laboratory procedures, simplifying compliance audits and incoming inspection routines. Practical handling and measurable workflow benefits A clear digital readout speeds up routine measurements and minimises reading errors compared with analog scales, which supports higher throughput in series inspection. The generous Measuring depth 2000 mm extends capability to deep bores and recessed features without improvised extensions, reducing handling time. Together, the calibrated accuracy and digital operation cut decision time on the shop floor, contribute to stable process capability and make the instrument a pragmatic choice for production environments that require documented, repeatable internal measurements. For tailored advice on integrating this Microtech Metrology instrument into production or to request delivery from Metav Werkzeuge’s European quality hub in Emmerich, contact our consultants for a precise specification and supply plan. Technical data Article number: 139450822 GTIN: 4061905046629 Manufacturer: Microtech Metrology ECLASS: 21170310 Digital: yes Facts Measuring range: 250–450 mm Measuring depth: 2000 mm Accuracy: ±0.03 mm Calibration: ISO 17025 Special features ISO 17025 calibration certificate included Digital internal gauge for bore and internal dimensions Category: Medium (suitable for medium-sized components) Asset: product image available FAQ What level of traceability does the calibration provide? The instrument is supplied with an ISO 17025 calibration certificate, which documents traceability to national standards and the laboratory procedures used to verify performance. Is this instrument suitable for deep internal bores? Yes. With a measuring depth of 2000 mm the gauge is designed to access and measure recessed or deep bores without improvised extensions. What accuracy can be expected in routine use? The device is specified at ±0.03 mm; the ISO 17025 calibration confirms this performance within documented measurement uncertainty for inspection tasks. Which applications is the instrument optimised for? It is optimised for medium-range internal measurements such as jigs, housings, bearing seats and mould inserts where repeatable, documented readings are required. Is the readout suitable for rapid series inspection? The digital readout provides fast, unambiguous values that reduce reading time and operator interpretation, improving efficiency in serial quality checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer Retractable Measuring Head Digital 0.001mm Resolution ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceable calibration, 0.001 mm digital resolution and a 250–450 mm measurement range to ensure repeatable internal measurements and faster quality decisions in the workshop; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Internal fine measuring instrument (Microtech Metrology) — digital internal bore gauge, ISO 17025‑calibrated Internal fine measuring instrument by Microtech Metrology designed for precise internal diameter measurement in production and metrology labs Digital readout with 0.001 mm resolution ISO 17025 calibrated with certificate Measuring range 250–450 mm, 150 mm depth High accuracy ±0.015 mm for reliable control Reduce rework with industrystandard accuracy and fast readout The instrument delivers a digital readout with a finest step of 0.001 mm, enabling unambiguous readings and quicker pass/fail decisions on the shop floor. With a stated accuracy of ±0.015 mm, the device targets routine production control where reproducibility and traceability matter; fewer ambiguous measurements mean reduced rework and shorter inspection cycles. The solid digital display removes interpretation errors commonly associated with analogue indicators, which improves throughput in inspection tasks. Built for medium-range internal measurement tasks Classified for the medium measurement band (maximum range in the 300–500 mm class), this gauge covers internal diameters from 250–450 mm while offering a measuring depth of 150 mm, making it suitable for medium-sized housings, assemblies and cylindrical components. The geometry and depth capability balance reach and stiffness, so the gauge remains stable when measuring bores and recesses, and provides consistent results even on larger mating parts. This combination supports both repeatable workshop checks and incoming inspection routines. Calibration and documentation to strengthen quality chains Delivered with an ISO 17025 calibration certificate, the measuring device arrives ready for use in accredited quality processes and auditing procedures. The traceable calibration statement documents measurement uncertainty and supports compliance demands in supply chains and regulated industries. For organisations that require documented measurement capability, the certificate removes uncertainty about instrument performance and simplifies process qualification and internal audits. Practical integration and operator benefits The digital interface and clear numeric display speed up reading and logging of measurements, while the instrument’s specification aligns with standard inspection workflows. Its design reduces operator influence on results, contributing to more consistent data across different users. Combined with Metav Werkzeuge’s product range and advisory services, the device is a pragmatic choice for workshops and laboratories seeking measurable improvements in inspection reliability and process control. For application advice or to obtain the ISO 17025‑calibrated Microtech Metrology internal fine measuring instrument, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific measurement tasks Technical Data Article number: 139450800 GTIN: 4061905045646 Brand: Microtech Metrology Category: Fine measuring instruments Digital: yes Facts Measurement range: 250–450 mm Measuring depth: 150 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Display: digital Special features ISO 17025 calibration with certificate Classified as medium range instrument (300–500 mm) Intended for internal diameter measurement Suitable for workshop and laboratory inspection FAQ What measurement range does the instrument cover? The instrument covers a measurement range of 250–450 mm, suitable for medium-sized bores and housings. Is the device supplied calibrated? Yes — the internal fine measuring instrument is delivered fully calibrated to ISO 17025, including a calibration certificate. What resolution and accuracy can be expected? The digital readout provides 0.001 mm resolution with an accuracy of ±0.015 mm, appropriate for routine metrology and production control. Can this gauge be used in production quality control? Yes. With its digital output and documented ISO 17025 calibration, the device is intended for shop-floor inspection and traceable quality checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer Retractable Measuring Head Digital 0.001mm Resolution ISO 17025 Calibrated - Microtech Metrology
Precise internal measurement across a 250–450 mm range is ensured by the combination of a digital readout, a retractable measuring head and an ISO 17025 calibration certificate — delivering reproducible inspection results for medium‑sized components. Order the internal digital bore gauge directly via Metav Werkzeuge or consult our specialists if further advice is required. Internal digital bore gauge by Microtech Metrology — 250–450 mm range, ISO 17025 calibrated The internal digital bore gauge is a workshop and inspection instrument for accurate internal dimensioning of medium‑sized bores, combining a fine resolution display with a retractable measuring head for protected transport and measured-value reliability. ISO 17025 calibrated with certificate 250–450 mm measuring range 0.025 mm accuracy with 0.001 mm resolution Retractable measuring head for safe handling Certified precision for traceable results Delivered with an ISO 17025 calibration certificate, this instrument provides documented traceability suitable for quality control and audit trails. The digital display offers an 0.001 mm resolution, while the specified 0.025 mm accuracy sets expected measurement uncertainty for typical inspection tasks. Such documented calibration and fine display resolution reduce the need for repeat measurements and support consistent acceptance criteria in production and incoming inspection environments. Medium-range reach with stable handling Classified in the medium measuring category (300–500 mm), the gauge covers a 250–450 mm measuring span that balances reach and rigidity for workshop use. The measuring depth of 1000 mm permits access to deeper bores or stepped features when paired with appropriate extensions, while the instrument geometry maintains sufficient stiffness to keep measurement scatter low. This combination suits fixture and component inspection where both accessibility and reproducibility matter. Practical features that simplify shop-floor measurement A retractable measuring head protects the contact elements during storage and transport and enables safe insertion into bores before measurement. The digital readout presents clear numerical values and speeds up the inspection loop compared with analogue gauges; the small increment display facilitates fine adjustments and quick decision-making. The design minimises handling errors and, together with the ISO 17025 certificate, enhances confidence in pass/fail evaluations without complex conversions. Discuss requirements with Metav Werkzeuge's precision team or order the Microtech Metrology internal digital bore gauge with ISO 17025 calibration directly from Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 139450811 GTIN: 4061905046094 Manufacturer: Microtech Metrology Facts Measuring range: 250–450 mm Resolution (display): 0.001 mm Stated accuracy: 0.025 mm Measuring depth: 1000 mm Special features Digital readout Retractable measuring head Delivered with ISO 17025 calibration certificate Category: fine measuring instrument for internal measurement FAQ What measuring range does the instrument cover? The instrument covers a measuring range from 250 to 450 mm, suitable for medium‑sized internal dimensions. What accuracy and resolution are specified? The device provides a resolution of 0.001 mm on the digital display and a stated accuracy of 0.025 mm. Is a calibration certificate included? Yes, the instrument is supplied with an ISO 17025 calibration certificate for traceable measurement results. Which applications are best suited to this bore gauge? This instrument is ideal for quality control of medium components, fixture inspection and situations requiring documented, reproducible internal measurements (SKU 139450811). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer With Carbide Measuring Faces, 0.008mm Accuracy, Touchscreen Display - Microtech Metrology
Combine wear‑resistant carbide measuring faces with Wireless and USB data output and ±0.008 mm accuracy for repeatable inspection of medium‑sized components; this ensures efficient quality checks and reduced rework. Order the instrument directly via Metav Werkzeuge or consult our specialists for application support. Internal fine measuring instrument — Microtech Metrology, carbide faces, Wireless+USB The Internal fine measuring instrument is a medium‑range internal gauge designed for precise dimensional control of components and assemblies in toolmaking, fixture construction and quality assurance. Carbide measuring faces for long service life Measurement range 250–450 mm Accuracy ±0.008 mm for fine inspection Wireless and USB data output Precision tailored to medium‑range components This instrument provides a measurement range of 250–450 mm, placing it in the medium class for workshop and mould‑making tasks where reach and rigidity must be balanced. With an accuracy of ±0.008 mm, the device performs well above standard digital calipers and closes the gap to high‑precision instrumentation, making it suitable for incoming inspection and production sampling. The specification supports reproducible results on shafts, housings and medium‑sized assemblies, reducing uncertainty in toleranced work. Durable contact surfaces for consistent repeatability Equipped with carbide measuring faces, the gauge maintains its dimensional integrity under continuous use. Carbide contacts reduce wear and preserve the measuring geometry, so calibration drift is minimised and service intervals are extended. Combined with a display resolution of 0.0001 mm, the setup offers both tactile stability and fine display feedback, which helps technicians obtain repeatable readings without over‑relying on subjective feel. Modern data transfer to speed up workflows Data capture is simplified via Wireless and USB connectivity alongside a colour 1.54" touchscreen, enabling rapid transfer to SPC systems or measurement software. The hybrid concept—analogue measurement mechanics paired with digital read‑out and connectivity—allows established workshop practices to coexist with Industry‑grade data logging. This reduces manual transcription errors and shortens the path from measurement to corrective action, supporting traceability in production. Practical features that support quality control routines A measuring depth of 2000 mm extends the instrument’s usefulness to deeper bore and recess inspection tasks, while the medium‑range format remains comfortable for single‑operator handling. Built by Microtech Metrology, the gauge is intended for demanding shop environments where robustness and integration matter: consistent contact geometry, clear digital feedback and standardised interfaces make it straightforward to include this device in calibration plans and regular inspection cycles. For tailored advice on integrating the Microtech Metrology internal fine measuring instrument into existing inspection routines, and to purchase with confidence from Metav Werkzeuge, contact our technical advisors in Emmerich by phone or email. Technical Data SKU: 132450744 GTIN: 4061905453632 Manufacturer: Microtech Metrology Facts Measurement range: 250–450 mm Accuracy: ±0.008 mm Resolution: 0.0001 mm Measuring depth: 2000 mm Display: Colour 1.54" touchscreen Special features Carbide measuring faces Wireless + USB data output Analogue mechanism with digital display Medium‑range internal measuring instrument FAQ What measurement range does the instrument cover? The instrument covers a measurement range of 250–450 mm, suitable for medium‑sized components and assemblies. How precise is the device for quality checks? With an accuracy of ±0.008 mm, the Microtech Metrology internal fine measuring instrument is designed for fine inspection tasks where reliability and reproducibility are required. Which data outputs are available for integration with inspection systems? Data can be transmitted via Wireless and USB, allowing direct transfer from the instrument to SPC software or a PC for immediate analysis. Do the measuring faces resist wear during continuous use? Yes, the gauge features carbide measuring faces that increase wear resistance and help maintain long‑term repeatability. Is the instrument suitable for deep bore measurements? The device includes a measuring depth of 2000 mm, enabling inspection of deep recesses and extended workpiece features. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer With Carbide Measuring Faces, 0.008mm Resolution - Microtech Metrology
The supplied product data contain internal contradictions that prevent a reliable product description being produced. The record simultaneously indicates a mechanical, analogue inside measuring instrument and a reading resolution of 0.001 mm, while the auxiliary label suggests a digital dial-type indicator; these statements are mutually inconsistent for a single configuration. In addition, the stated measurement accuracy of 0.008 mm does not align clearly with the ultra-fine display resolution suggested elsewhere. Before a full, standards-compliant product text can be generated, please confirm whether the instrument is analogue or digital, specify the correct reading resolution and declared accuracy, and clarify whether a calibration certificate (and which standard, if any) is supplied. Once the source fields are corrected, a complete, compliant product description can be produced.
250-450mm Internal Micrometer With Carbide Measuring Faces, 0.01mm Resolution - Microtech Metrology
Benefit from precise medium‑range bore measurement thanks to the combination of a 0.01 mm dial resolution, carbide measuring faces and a long 1,000 mm measuring depth for stable readings on larger assemblies; order directly via Metav Werkzeuge or consult our specialists for application advice. Internal bore gauge – dial indicator, 250–450 mm (Microtech Metrology) The internal bore gauge is a dial‑indicator instrument for accurate internal diameter checks in workshop inspection and production control. Dial resolution 0.01 mm Accuracy ±0.022 mm Carbide measuring faces Measuring range 250–450 mm Measuring depth 1,000 mm Reliable precision for medium‑range bores This instrument is designed for medium‑range internal measurements, classified for the 300–500 mm category by its maximum range, which makes it ideal for fixture and mould components that require both reach and stiffness. The dial provides a 0.01 mm graduation combined with a verified accuracy ±0.022 mm, yielding repeatable comparative measurements that support quality control routines. The analogue readout and mechanical indicator simplify on‑the‑spot evaluations without reliance on batteries or electronics. Durable contact geometry for repeatable results The gauge features carbide measuring faces that resist wear under frequent use, maintaining contact geometry and reducing drift over time. Hardened contact surfaces are particularly beneficial when measuring ferrous or abrasive materials, as the tool preserves its measuring edges and therefore measurement integrity. This robustness reduces recalibration cycles and supports consistent documentation of internal diameters across production batches. Practical handling and extended reach for deep bores With a measuring range of 250–450 mm and a measuring depth of 1,000 mm, the instrument is suited to larger internal diameters while remaining manoeuvrable for workshop environments. The extended reach allows access to recessed bores and assemblies where standard short‑span instruments cannot measure reliably. The mechanical design balances reach with rigidity to keep deflection low, which helps achieve stable readings on longer spans. Integration into inspection workflows and traceable results As an analogue, dial‑based fine measuring device, this gauge integrates easily into inspection benches and documentation procedures where visual indication and manual verification are standard. The combination of a clear dial, robust contacts and measurable accuracy supports calibration records and traceable checks in production. For laboratories seeking consistent medium‑range internal measurement, the instrument provides a practical bridge between hand instruments and larger metrology systems. Contact Metav Werkzeuge in Emmerich for tailored application advice on the Microtech Metrology internal bore gauge and to arrange rapid supply or calibration planning Technical data Article number: 132450122 GTIN: 4061905454004 Manufacturer: Microtech Metrology Category: Fine measuring instruments Facts Measuring range: 250–450 mm Resolution / reading: 0.01 mm Accuracy: ±0.022 mm Measuring depth: 1,000 mm Analogue (dial indicator) Special features Carbide measuring faces Dial indicator (messuhr) Suitable for medium‑range bore measurement Robust design for workshop use FAQ What measurement range does the gauge cover? The internal bore gauge covers a measuring range of 250–450 mm and is intended for medium‑range internal diameter checks. How fine are the readings on the dial? The instrument provides a dial resolution of 0.01 mm with an overall accuracy of ±0.022 mm for reliable comparative measurements. Are the measuring faces wear‑resistant? Yes, the gauge is fitted with carbide measuring faces to ensure durable contact points and prolonged stability under repeated use. Can this instrument reach deep recesses? The design includes a measuring depth of 1,000 mm, allowing measurements of recessed bores and deeper assemblies. Which brand and article number should be referenced when ordering? Reference Microtech Metrology internal bore gauge, Article number 132450122, when enquiring or ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer With Retractable Measuring Head, Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the ISO 17025-calibrated measurement chain, Wireless + USB data transfer and a compact 1.5" colour touchscreen to speed up inspection tasks while maintaining traceability; order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Internal Precision Bore Gauge — 1.5" colour touchscreen, Wireless + USB (Microtech Metrology) The Internal Precision Bore Gauge is a digital instrument for precise internal measurements in workshop and quality‑control environments, covering a measuring range of 250–450 mm and designed for robust handling in production and inspection. ISO 17025 calibrated with certificate Wireless and USB data output 1.5" colour touchscreen display Retractable measuring head for access Reliable accuracy for medium‑range internal measurement The instrument is built for repeatable internal measurements across a 250–450 mm span, placing it in the Medium (300–500 mm) class that balances reach and stiffness for workshop use. The solid metrology concepts reduce deformation during measurement and the device achieves a nominal accuracy of 0.033 mm, which supports confident decision‑making in routine quality control. The retractable measuring head improves accessibility into bores and stepped features, reducing setup time and helping to maintain measurement integrity. Modern data handling to streamline quality workflows Equipped with Wireless + USB outputs and a 1.5" colour touchscreen, the instrument integrates easily into digital workflows and inspection stations. Wireless transfer enables cable‑free logging to data collection systems, while USB permits direct export for immediate analysis or archiving. The touch interface presents readings and basic menus clearly, shortening training time and reducing input errors. Supplied with a support set, the package is ready for practical use in the workshop or metrology lab. Calibrated delivery and traceable results Delivered fully calibrated according to ISO 17025, the gauge arrives with a calibration certificate that documents traceability and measurement uncertainty for audit and quality records. That calibration level suits laboratories and businesses that require certified evidence of accuracy. The combination of documented calibration and robust measurement hardware means faster integration into documented inspection procedures and fewer questions during audits. For precision‑grade internal inspection, request this Microtech Metrology gauge through Metav Werkzeuge — our Emmerich team will advise on application fit, calibration options and delivery. Technical data Article number: 131450770 GTIN: 4061905044106 Display: Color 1.5" touchscreen Data output: Wireless + USB Digital instrument: yes Facts Measuring range min: 250 mm Measuring range max: 450 mm Resolution: 0.0001 mm Accuracy: 0.033 mm Measuring depth: 7000 Modules: 4 Calibrated to: ISO 17025 Special features Retractable measuring head Delivered with support set Colour touchscreen interface Wireless data transfer capability USB data connection Supplied with calibration certificate (ISO 17025) FAQ How is traceability ensured for this gauge? The instrument is supplied fully calibrated to ISO 17025 and delivered with a calibration certificate, ensuring traceability and documented measurement uncertainty. Can the readings be exported to inspection software? Yes; the gauge supports Wireless + USB data outputs for direct transfer of measurement results to data collection systems or PC software. Which measurement class does this device belong to? With a measuring range of 250–450 mm, it is classified in the Medium (300–500 mm) category, suitable for larger fixtures, housings and many machine‑shop tasks. Is the gauge ready for immediate workshop use? The instrument arrives calibrated and includes a support set, making it ready for practical inspection tasks after brief setup. What advantage does the retractable measuring head offer? The retractable head simplifies access into confined bores and stepped features, reducing setup time and helping to keep measurements reproducible Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer With Retractable Probe, Colour Touchscreen, ISO 17025 Calibration - Microtech Metrology
Combining ISO 17025 traceability, ±0.025 mm accuracy and convenient Wireless + USB data transfer ensures reliable, audit-ready internal measurements for medium-sized assemblies; order directly via Metav Werkzeuge or contact our consultants for matching advice. Internal precision gauge by Microtech Metrology — 250–450 mm range, ±0.025 mm accuracy The Internal precision gauge is a digital instrument designed for precise internal measurements in fixture, mould and component assembly work within a medium measuring range. Range 250–450 mm for medium assemblies Accuracy ±0.025 mm with ISO 17025 calibration Wireless and USB data output for easy transfer Retractable probe and 2,000 mm measuring depth Reliable results for medium-sized components The mid-range design covers 250–450 mm and is classified for medium assemblies, offering the best compromise between reach and rigidity for workshop use. The instrument’s ±0.025 mm stated accuracy provides a clear performance target for quality control, while the fine display resolution (0.0001 mm) permits precise read‑outs during set-up and inspection. Designers and quality engineers benefit from reproducible internal measurements without needing specialised fixtures, because the device combines mechanical stability with a retractable measuring head to protect the probe during handling. Fast data transfer and digital traceability Equipped with Wireless and USB outputs and a 1.54" colour touchscreen, the gauge simplifies documentation and data flow into inspection systems. Wireless transfer reduces handling time between the bench and PC, and the USB option ensures a reliable wired backup for large data sets. The integrated touchscreen presents readings clearly and speeds up routine checks, so production control becomes more efficient and error-prone manual transcription is eliminated. Audit-ready calibration and conformity Delivered fully calibrated to ISO 17025, the instrument includes a calibration certificate, which supports internal audits and supplier qualification processes. This formal calibration assures traceability to recognised standards and reduces administrative overhead when proving measurement capability. For regulated environments or contract manufacturing, the included certificate eases acceptance testing and sample reporting by providing independent verification of measurement uncertainty. Practical workshop advantages that increase uptime With a measuring depth of 2,000 mm and a retractable probe, the device handles deeper bores and internal features while remaining compact enough for bench work. The durable construction and intuitive digital interface minimise operator training time and lower the risk of wear-related errors. These practical design choices translate into less downtime and faster throughput for typical workshop tasks such as inspection of housings, bores and assembled components. For audit-ready internal measurement with ISO 17025 calibration and flexible data transfer, contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 139450722 GTIN: 4061905046636 Manufacturer: Microtech Metrology Facts Measuring range: 250–450 mm Measuring depth: 2,000 mm Resolution (reading): 0.0001 mm Accuracy: ±0.025 mm Display: Colour 1.54" touchscreen Data output: Wireless, USB Special features ISO 17025 calibrated; calibration certificate included Digital instrument with retractable probe Category: Fine measuring instruments ECLASS: 21170310 FAQ What measurement range does the instrument cover? The device covers a measuring range of 250–450 mm, placing it in the medium class suited to components like fixtures, housings and larger mould parts. Is the gauge delivered calibrated for audit use? Yes — the Internal precision gauge from Microtech Metrology is supplied with an ISO 17025 calibration and a calibration certificate for immediate audit and traceability needs. How can measurement data be transferred to a PC or network? Data transfer is available via Wireless connection for convenience and USB for a stable wired link; readings are also shown on the 1.54" colour touchscreen for quick inspection. What accuracy and resolution can be expected during inspections? The instrument specifies an accuracy of ±0.025 mm with a display resolution of 0.0001 mm, offering precise indication and repeatable results suitable for quality control. Is the device suitable for deeper internal measurements? Yes — with a measuring depth of 2,000 mm and a retractable probe, the unit is capable of accessing deeper bores and internal features while protecting the probe during handling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-450mm Internal Micrometer With Retractable Probe, Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high measurement reliability, modern data transfer and ISO 17025 traceability to streamline in-house bore inspection. The combination of a 250–450 mm measuring range, ±0.03 mm accuracy and integrated Wireless+USB output supports fast process control on the shop floor. Order the instrument directly via Metav Werkzeuge or consult the Metav team for specification matching. Internal precision gauge — digital bore measurement 250–450 mm, Microtech Metrology The Internal precision gauge is a digital instrument for precise internal diameter inspection in production and metrology labs, designed to measure bores from 250 to 450 mm with industrial robustness and traceable calibration. Colour 1.54" touchscreen display Wireless and USB data output Calibrated to ISO 17025 with certificate Measuring range 250–450 mm, ±0.03 mm accuracy Medium-range bore metrology with workshop practicality The instrument addresses medium-size bore applications by offering a measuring range 250–450 mm, which places it in the category suited to larger fixture and component inspection without sacrificing handling. The specified accuracy ±0.03 mm gives a reliable tolerance band for standard quality control tasks, while the fine readout 0.0001 mm supports clear visual discrimination of small deviations. This balance of reach and stiffness reduces repositioning and speeds up batch inspection, helping maintain production throughput without complex handling procedures. Modern interface and seamless data workflows Equipped with a Colour 1.54" touchscreen and Wireless+USB connectivity, the device enables rapid transfer of measured values into statistical process control or inspection reports. The colour display simplifies on-device verification and reduces interpretation errors, while the wireless link and USB port support both temporary logging and permanent integration into a measurement network. These features lower clerical effort and improve traceability for audit-sensitive processes, turning manual readouts into actionable digital records. Calibrated delivery for assured traceability This measuring instrument is supplied calibrated under ISO 17025 and includes a calibration certificate, ensuring results are traceable to recognised standards. Certified calibration minimises the administrative burden associated with incoming inspection and supports documented measurement systems. For companies with formal quality systems, the supplied certificate simplifies acceptance testing and helps meet internal and external audit requirements. Built for repeatable shop-floor inspection With a measuring depth 3000 mm and a construction geared to routine use, the instrument is intended for repeated measurements on sizeable components where probe reach and repeatability matter. The digital mechanism provides stable readings for series inspection, and the robust data output options reduce transcription risks. Designed for everyday metrology tasks, the tool combines clear visual feedback with industrial connectivity to support both standalone checks and networked quality control. Contact Metav Werkzeuge in Emmerich for a tailored technical consultation, delivery options and ISO 17025 documentation to match this Microtech Metrology internal precision gauge to your production requirements — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical Data SKU: 139450733 GTIN: 4061905047169 Manufacturer: Microtech Metrology Category: Precision measuring instruments Facts Measuring range: 250–450 mm Measuring depth: 3000 mm Accuracy: ±0.03 mm Readout / Resolution: 0.0001 mm Display size: Colour 1.54" Special features Data output: Wireless + USB Digital instrument with touchscreen Delivered calibrated to ISO 17025 with certificate ECLASS: 21170310 FAQ What measuring range is covered by this instrument? The instrument measures internal diameters from 250 to 450 mm, making it suitable for medium‑range bore inspection in fixture and component testing. What accuracy and resolution can be expected? Accuracy is specified as ±0.03 mm with a display resolution of 0.0001 mm, providing reliable conformity checks alongside fine readout detail. Is the device supplied with a calibration certificate? Yes, the Microtech Metrology internal precision gauge is delivered calibrated to ISO 17025 and includes the calibration certificate for traceability. How are measurement results exported? Measurement values can be exported via Wireless+USB, supporting both temporary logging and connection to inspection software or SPC systems. For which applications is this instrument intended? The instrument is designed for workshop and production metrology where medium‑range internal diameters require repeatable, traceable measurement — typical uses include fixture inspection, housing and bore quality control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Fast, repeatable geometry checks in seconds
Caliper gauges (also referred to as precision calipers or quick-action gauges) are high-efficiency fine measuring instruments designed for precise geometry control in the production environment. Need to verify internal grooves, pipe wall thickness or small bores quickly? These tools deliver reliable results at sampling speed, making them ideal for series production, incoming goods inspection and workshop testing.
How they work and where they belong
The core of these devices is a spring-loaded lever system that applies a defined contact force, so measurements remain repeatable and independent of the operator’s feel. Caliper gauges capture hard-to-reach features — deep internal grooves, notches, freeform surfaces and thin walls — either mechanically or in digital form. Ergonomic one-handed operation allows the workpiece to stay in the machine or on the test table while checks are performed, reducing handling and downtime.
Practical advantages that improve throughput
- Consistent repeatability due to defined contact force, lowering measurement scatter.
- Rapid sampling: geometry checks are performed in the time of a few seconds, reducing cycle times.
- Flexible contact options such as ball, blade or disc contacts, matching different workpiece geometries.
- Choice of robust analog models or digital units with Go/NoGo tolerance indication and interfaces for direct integration into digital quality assurance.
- Ergonomic design that shortens set-up and inspection times, increasing shop-floor productivity.
Metav: a reliable precision partner for industry
Metav combines decades of metrology experience with a broad offering from Emmerich, acting as a quality filter for the European market. With more than 48,000 customers and over 250,000 products, Metav supplies a comprehensive selection of caliper gauges and accessories, helping purchasing managers reduce supplier complexity while securing reliable supply and technical competence.
Summary
Caliper gauges — precision calipers and quick-action gauges — provide fast, repeatable and operator-independent measurements for demanding industrial inspection tasks, delivering measurable gains in throughput and quality control.
FAQ
What makes caliper gauges suitable for deep internal measurements?
The spring-loaded lever system in caliper gauges ensures a defined contact force while specialised stylus geometries (ball, blade, disc) reach deep grooves and notches, enabling precise capture of internal features.
Can digital caliper gauges be integrated into existing quality systems?
Yes. Digital caliper gauges often include tolerance indication (Go/NoGo) and data interfaces, allowing direct connection to digital quality assurance systems for automated logging and analysis.
Which contact form should I choose for thin-walled parts?
For thin or delicate walls, disc or ball contacts minimise local deformation; Metav’s product range lists the available contact geometries so you can match the caliper gauge to the application.
How do caliper gauges maintain operator-independent repeatability?
Defined contact force from the spring-loaded lever system removes variability caused by hand pressure, so caliper gauges deliver consistent measurements across different operators and cycles.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com