messschieber beschriftung
Das hier ist der erste PLatzhalter
200mm Internal Groove Caliper 0.05mm Reading, Matt Chrome Finish, Stainless Steel, Supplied in Case - Metav IndustryLine
Benefit from a practical combination of measurement range, tactile vernier precision and corrosion-resistant construction for consistent groove inspection; use the robust 26–200 mm span together with a 0.05 mm reading for dependable workshop checks. Order the caliper directly via Metav Werkzeuge or consult our advisers if required. M201.136 — Inside-groove caliper, 26–200 mm range, 0.05 mm vernier (Metav IndustryLine) The M201.136 is an analogue inside-groove caliper intended for precise measurement of internal grooves and recesses in machine‑shop and quality‑control environments. Range 26–200 mm for internal grooves Vernier resolution 0.05 mm Matt chrome finish, stainless construction Locking screw for repeatable measurements Reliable groove measurement where it matters The caliper is built around a 26–200 mm measuring span that classifies it within the standard workshop range, offering a balance of reach and rigidity suited to routine machine‑shop tasks. With an analogue 0.05 mm vernier, the instrument provides a familiar, tactile reading method that technicians value for quick verifications. The design focuses on the core function — consistent internal groove checks — making it a practical choice for production inspection and jig setup where straightforward, dependable readings are required. Clear readings and reproducible results An analogue vernier scale combined with a secure locking screw simplifies repeated checks and short series inspections: once the jaw position is fixed, measurements can be carried out without unintended drift. The 60 mm jaw length gives adequate contact for typical groove geometries, helping to stabilise the caliper during internal measurements. For workshops that rely on mechanical vernier practice, this configuration supports efficient workflows and reduces measurement rework. Durable finish and workshop handling Constructed from stainless steel (INOX) with a matt chrome finish, the instrument resists workshop contamination and surface corrosion, aiding longevity under regular use. The straightforward analogue format requires no batteries and is low maintenance, with routine cleaning and sliding‑surface care ensuring long service life. Standard factory calibration is applied prior to dispatch, meeting everyday inspection expectations and simplifying initial deployment on the shop floor. For groove inspection procurement or application advice contact Metav Werkzeuge — Metav IndustryLine specialists are available to discuss the M201.136 and its suitability for specific tasks. Technical data Article number: M201.136 GTIN: 4054469100678 Category: Calipers Facts Measuring range: 26–200 mm Resolution/readability: 0.05 mm Jaw length: 60 mm Construction: INOX (stainless steel) Scale type: Analogue vernier Special features Matt chrome finish Locking screw Designed for internal groove measurement Analogue vernier scale FAQ What measuring range does the caliper cover? The M201.136 covers a measuring range of 26–200 mm, making it suitable for standard workshop tasks and internal groove checks. What reading accuracy is provided by this analogue caliper? The instrument uses an analogue vernier with a 0.05 mm resolution, matching common mechanical vernier practice for routine inspection work. Is the tool suitable for use in a metalworking environment? Yes; the stainless steel (INOX) construction and matt chrome finish give the caliper good resistance to typical workshop contamination and support durable everyday use. How are repeatable measurements ensured with this caliper? Repeatability is supported by the vernier scale and the integrated locking screw, which secures the jaw position for multiple successive readings. Does the caliper come with an advanced calibration certificate? The M201.136 is supplied with standard factory calibration; no ISO 17025 certificate is indicated for this item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Pocket Caliper 0.05mm Resolution Stainless Tool Steel Matt Chrome, Four-Point Measurement, Wooden Case - Metav IndustryLine
Take advantage of a compact, workshop-ready design combined with reliable vernier accuracy and practical inspection features for dependable everyday measurements; the pocket format and matt chrome finish ensure easy handling and corrosion resistance during routine use. Order the M201.048 pocket caliper directly via Metav Werkzeuge or ask our consultants if needed. M201.048 Pocket Caliper – 0–200 mm, 0.05 mm Vernier (Metav IndustryLine) A compact M201.048 pocket caliper designed for standard workshop measurement tasks up to 0–200 mm, offering vernier reading at 0.05 mm resolution and four-way measurement capability. Compact 0–200 mm standard range Vernier resolution 0.05 mm Four-way measurement (inside/outside/depth/step) Locking screw for repeatable readings Engineered for dependable shop-floor accuracy This pocket-style caliper is a standard-range measuring tool tailored to the everyday needs of machine shops and metalworkers. With a measuring range of 0–200 mm and a vernier graduation of 0.05 mm, the instrument provides the type of mechanical precision expected for general inspection work; such graduation is consistent with industrial analogue standards and supports repeatable measurements within typical workshop tolerances. Constructed from tool steel and finished with matt chrome plating, the caliper balances robust handling with protection against wear and mild corrosion, making it suitable for regular use on production floors and in service bays. Practical features that increase measurement efficiency The caliper includes four-way measurement functionality—outside, inside, depth and step—so a single instrument covers the most common inspection tasks, reducing tool changes and process interruptions. A locking screw secures the slider for repeatable transfers, and the reverse side carries a thread table for quick reference during thread checks. The compact jaw geometry (noted as 50/17 mm) improves access into confined areas while keeping the instrument pocketable; the analogue vernier format ensures measurements remain readable without reliance on batteries or electronics. A straightforward choice for routine metrology Specified to a workshop Werksnorm, the caliper is an analogue instrument for users who prefer traditional vernier operation or require a battery‑free solution. The simple, mechanical design minimises service needs and offers long-term reliability under normal workshop conditions. Suppliers and service departments appreciate the directness of a calibrated, mechanical caliper that integrates easily into inspection routines; the M201.048 delivers this practicality in a compact format that supports efficient quality checks and day‑to‑day maintenance. Contact Metav Werkzeuge in Emmerich for ordering details or technical advice on the M201.048 pocket caliper and to discuss suitability for specific inspection tasks Technical Data Article number: M201.048 GTIN: 4054469100357 Category: Calipers Core data Measuring range: 0–200 mm Resolution: 0.05 mm Jaw lengths: 50/17 mm Tariff number: 90173000 Vernier detail: 1/128" (top) and 1/20‑39 mm (bottom) Format: Analogue vernier Special features Material: tool steel Finish: matt chrome plating Measurement modes: inside, outside, depth, step Locking screw fitted Thread table on reverse side Type: pocket caliper Norm: Werksnorm FAQ What measuring tasks is this caliper best suited for? The M201.048 pocket caliper is ideal for standard workshop inspections, providing reliable outside, inside, depth and step measurements across a 0–200 mm range. Does the caliper require batteries or electrical maintenance? No. This is an analogue vernier caliper; the mechanical scale and vernier operate without batteries, reducing downtime for routine use. Is the instrument robust enough for shop use? Yes. Constructed from tool steel with a matt chrome finish, the caliper is designed for regular workshop handling and offers protection against wear and light corrosion. Can the caliper be used for thread checks? A thread table on the reverse side aids quick reference during thread inspection and measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Pocket Caliper 0.05mm, Monoblock Matt Chrome, Lock Screw, Four‑Function Measurement, DIN 862, Inox, Case - Metav IndustryLine
The compact combination of a 0–200 mm measuring range, an accurate 0.05 mm vernier, and a robust monoblock stainless‑steel construction makes this pocket caliper a reliable everyday instrument for workshop and service tasks; ideally ordered through Metav Werkzeuge or discussed with their technical consultants if clarification is required. M201.041 Pocket Caliper – 0–200 mm, 0.05 mm vernier (Metav IndustryLine) The M201.041 pocket caliper is a compact analogue measuring tool designed for routine measurements in metalworking and maintenance where a portable, exact instrument is required Pocket-sized 0–200 mm range Vernier graduation 0.05 mm Monoblock stainless steel construction Locking screw for secure readings Precision where everyday decisions start The instrument offers a 0–200 mm range with a fine 0.05 mm vernier graduation, delivering measurements that match standard workshop requirements under DIN 862. The analogue vernier features dual graduations (top scale 1/128", lower scale 1/20–39 mm), enabling cross-reference readings that are useful when comparing metric and imperial references on the fly. Built as a pocket-sized caliper, it balances reach and stiffness: the selected range places it squarely in the Standard category (100–300 mm), which is the most versatile for general engineering, maintenance and inspection tasks. The clear mechanical scale and the absence of electronics reduce downtime and simplify use in environments where durability and immediate readability matter most. Robust construction for repeated workshop use Manufactured in stainless steel with a monoblock frame, the tool resists bending and maintains alignment across frequent use. The integrated locking screw secures the slide for repeatable transfer measurements and enables easier recording without losing the reading. A thread table on the reverse side adds practical reference data for routine work. Delivery includes a transport case (plastic or wooden) to protect the instrument during storage and travel; the case is intended for transport rather than long‑term archival storage. This pragmatic combination of materials and mechanics ensures the instrument remains a dependable partner on the bench or in the field. Measured versatility and straightforward operation Four measurement modes are available — outside, inside, depth and step — allowing the caliper to replace multiple single‑purpose tools in a small toolbox. The simple mechanical design keeps operation intuitive for technicians and craftsmen who prefer analogue instruments or work where electronic devices are impractical. Clear graduations and a stable frame reduce reading errors, supporting faster quality decisions and minimising rework. For teams seeking consistent results across shifts, the mechanical reliability of this model supports standardised procedures without the need for batteries or electronic calibration routines. Contact Metav Werkzeuge for specific application advice or to request the M201.041 pocket caliper for workshop use Technical data SKU: M201.041 GTIN: 4054469100289 ECLASS: 21170344 Customs tariff: 90173000 Core data Measuring range: 0–200 mm Scale / Increment: 0.05 mm Standard: DIN 862 Nonius: 1/128" (top), 1/20–39 mm (bottom) Special features Material: stainless steel Monoblock construction Locking screw Four measurement modes: outside / inside / depth / step Thread table on reverse side Delivered in transport case (plastic or wooden) FAQ How accurate is the M201.041 pocket caliper? The M201.041 pocket caliper provides a 0.05 mm vernier resolution and complies with DIN 862, making it suitable for standard workshop accuracy requirements. Can the caliper measure internal and external dimensions? Yes — the instrument supports outside and inside measurements as well as depth and step readings, offering four measurement modes for versatile use. Is the caliper durable enough for daily workshop use? Constructed from stainless steel in a monoblock design with a locking screw, the caliper is built for repeated handling and transport in workshop conditions. Does the delivery include a protective case? The product is supplied in a transport case (plastic or wooden), intended to protect the instrument during transport rather than as a permanent storage solution. Which measuring range category does this caliper belong to? With a maximum range of 200 mm, this instrument is classified as Standard (100–300 mm), offering a balanced combination of reach and rigidity for general engineering tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper 0.02mm Resolution Monoblock Stainless Steel Three-Point Depth Gauge, DIN 862 - Metav IndustryLine
Take advantage of a compact, workshop-ready solution that combines a 0–200 mm measuring range, 0.02 mm vernier resolution and a robust stainless monoblock construction for repeatable results; order the pocket caliper directly via Metav Werkzeuge or ask the consultants for application advice. Pocket Caliper M201.047 (Metav IndustryLine) — 0–200 mm, 0.02 mm vernier The Pocket Caliper M201.047 is a stainless‑steel, monoblock vernier caliper with torque lock, designed for standard workshop and machine‑shop measurements up to 200 mm. Stainless monoblock construction 0–200 mm measuring range 0.02 mm vernier resolution Torque lock for repeatable contact Precision and compliance for everyday workshop control The pocket caliper offers DIN 862 compliance and a mechanical vernier that delivers 0.02 mm resolution, making it suitable where battery‑free, reproducible readings are required. The analogue vernier ensures stable measurement results without electronic drift; combined with a rigid monoblock frame, this delivers a reliable baseline for quality control tasks in metalworking. The choice of stainless steel provides corrosion resistance in mixed workshop environments while keeping the measuring faces true to form. Versatile handling and four essential measurement modes Built as a compact pocket caliper for portable use, the instrument supports four measuring functions — outside, inside, depth and step — which simplifies a wide range of inspection routines. The integrated depth gauge and a clearly engraved thread chart on the reverse speed up common checks and reduce the need for auxiliary gauges. The torque lock secures the slider at the set measuring force, reducing operator variation and improving repeatability for serial checks. Practical extras that reduce downtime and increase confidence The vernier scale arrangement and the clearly marked jaws mean quick readings and less interpretation effort during busy shifts. The device’s monoblock construction and stainless finish mean fewer service intervals compared with multi‑part assemblies, while the absence of electronics eliminates battery maintenance. As a standard‑class caliper with workshop focus, it balances range, stiffness and single‑hand usability — meeting the needs of general machining, fixture checks and routine inspection. Choose the Metav IndustryLine pocket caliper for robust, DIN‑compliant precision — contact Metav Werkzeuge for tailored advice and reliable delivery from Emmerich. Technical data Article number: M201.047 GTIN: 4054469100340 ECLASS: 21170344 Tariff code: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.02 mm Measurement functions: inside / outside / depth / step Standard: DIN 862 Jaw length: 50/17 mm Analogue vernier instrument Special features Material: stainless steel (inox) Monoblock construction Torque lock (moment lock) Thread chart on reverse side Pocket caliper design with depth gauge FAQ What applications suit this caliper best? The Pocket Caliper M201.047 (Metav IndustryLine) is ideal for general machine‑shop measurements, fixture checks and routine quality control where a compact 0–200 mm tool with 0.02 mm readability is required. Is the caliper capable of inside and depth measurements? Yes — the instrument provides four measuring functions: outside, inside, depth and step measurements, supported by a dedicated depth gauge and appropriately shaped jaws. How does the torque lock help measurement quality? The torque lock secures the slider at a consistent contact force, reducing operator‑induced deviation and improving repeatability during serial measurements with the M201.047. Does the caliper meet recognised standards? The caliper is manufactured to DIN 862 standards and features a mechanical vernier arrangement for reliable, battery‑free readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper 0.05mm Fine Vernier, Moment Lock, Four‑Function, Tool Steel, Matt Chrome – Metav IndustryLine
A compact, workshop-ready precision instrument that pairs a 0–200 mm measuring range with a 0.05 mm vernier for reliable dimensional checks; the moment‑lock ensures repeatable clamping and consistent readings. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. M201.049 Pocket caliper (0–200 mm, 0.05 mm) – Metav IndustryLine A M201.049 pocket caliper designed for fast, portable dimensional control in workshops and service tasks Compact 0–200 mm measurement range 0.05 mm nonius resolution for steady readings Moment-lock mechanism for repeatable clamping Four-way measurement: inside, outside, depth, step Precision that fits the workshop routine This pocket caliper is built around a 0–200 mm range, placing it firmly in the standard category for machine and metalworking tasks where reach and stiffness must be balanced. The 0.05 mm vernier (analogue nonius) provides a clear, comparably high resolution for routine quality checks and maintenance tasks. For operators used to digital displays, the analogue scale still gives a fast visual reference and eliminates battery dependency, which is valuable for mobile inspections or remote shop-floor use. Consistent clamping for repeatable results A dedicated moment-lock mechanism secures the sliding jaw at a defined clamping torque, reducing variation from manual pressure and improving repeatability between measurements. Combined with the analogue vernier calibration, this design stabilises readings during transfer and setup work. The instrument includes a compact vernier layout (top and bottom scale details provided) and a practical thread table on the reverse for quick thread reference during workshop operations. Four-way measurement for everyday versatility Equipped for inside, outside, depth and step measurements, the caliper replaces several separate gauges for common inspection tasks. The slim jaws and stepped measuring faces allow access to confined areas while the depth blade supports quick depth checks. This multi-function capability shortens measurement cycles and reduces tool changes, supporting higher throughput in repetitive checks and first-off inspections. Durable construction matched to workshop demands Manufactured from tool steel with a matt‑chrome finish, the caliper resists light corrosion and retains surface integrity under normal workshop conditions. The instrument is produced to a workshop manufacturing standard (Werksnorm) and uses an analogue vernier system familiar to experienced fitters and machinists. Its compact form factor supports pocket or bench storage and delivers reliable mechanical performance for day-to-day dimensional control. For precise, portable measurement choose the Metav IndustryLine M201.049—contact Metav Werkzeuge in Emmerich for further technical details or to arrange supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M201.049 GTIN: 4054469100364 Measurement range: 0–200 mm Resolution: 0.05 mm Material: tool steel, matt chrome Nonius: 1/128" (top) and 1/20–39 mm (bottom) Norm: Werksnorm Facts Measurement range max: 200 mm Measurement range min: 0 mm Analogue instrument: vernier scale Four‑way measurement: true Thread reference table: on reverse Tariff number: 90173000 Special features Moment‑lock mechanism for repeatability Four-way measurement: inside, outside, depth, step Material: tool steel with matt chrome plating Category: Standard (100–300 mm) FAQ How accurate is the caliper for everyday workshop checks? The M201.049 pocket caliper offers a vernier resolution of 0.05 mm, which aligns with common industrial requirements for routine dimensional control and delivers dependable accuracy for general machine‑shop tasks. Can the caliper perform depth measurements and internal checks? Yes, the instrument supports four‑way measurement — inside, outside, depth and step — so it is suitable for a broad set of inspection tasks without additional gauges. What feature ensures repeatable clamping during measurement? A built‑in moment‑lock mechanism fixes the sliding jaw at a consistent torque, reducing operator‑induced variation and helping to secure repeatable readings with the analogue vernier. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper 0.05mm Vernier Parallax‑Free Monoblock, Locking Screw, Depth Gauge, Plastic Case - Metav IndustryLine
Take advantage of a compact caliper that combines parallax-free reading with a robust stainless steel monoblock design and a practical locking screw for repeatable measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M201.106 Pocket caliper — 0–200 mm, parallax-free stainless steel, analogue A M201.106 Pocket caliper engineered for precise, on-the-go measurements in workshops, maintenance and inspection tasks. Parallax-free reading for reliable results 0–200 mm range with 0.05 mm resolution Monoblock stainless steel construction Includes depth gauge and thread table Precision and durability for routine inspection tasks The compact analogue caliper delivers a clear 0–200 mm measuring range with a 0.05 mm vernier resolution, engineered to meet practical workshop requirements under DIN 862. The parallax-free reading reduces reading errors common to small, portable gauges, while the stainless steel monoblock body resists wear and keeps jaw alignment over prolonged use. The integrated locking screw secures the slider for repeated checks and transfer measurements, supporting efficient process control and a predictable inspection routine. Four measurement functions in a pocket-sized instrument Despite its compact footprint, the tool offers four measurement functions — external, internal, depth and step measurement — enabled by the slim jaws and the depth gauge blade. The jaw geometry (50/24 mm) combines reach and accessibility for small features, while the lightweight construction (approx. 0.26 kg) keeps handling comfortable during repeated use. Supplied in a transport case, the caliper is ready for mobile inspection rounds or to sit as a reliable workshop standard in a service kit. Practical features that speed up daily workflows Designed for everyday reliability, the instrument includes a locking screw and a monoblock profile that reduces play between slider and beam, improving reproducibility. A thread table printed on the reverse provides quick references for common fastener checks, saving time at the bench. The analogue vernier is straightforward to read and maintain without batteries, making this caliper a pragmatic choice for field service, maintenance departments and vocational workshops that prioritise robust, low-maintenance measuring tools. For precise pocket calipers from Metav IndustryLine and expert purchasing advice, contact Metav Werkzeuge in Emmerich for tailored recommendations and reliable delivery. Technical data Article number: M201.106 GTIN: 4054469100531 Material: inox Measuring range: 0–200 mm Resolution: 0.05 mm Weight: 0.26 kg Standard: DIN 862 Core measurements Measuring range: 0–200 mm Resolution (vernier): 0.05 mm Jaw length: 50/24 mm Depth gauge: yes Four measurement functions: external, internal, depth, step Special features Parallax-free reading Locking screw Monoblock design Thread table on reverse Delivered in transport case FAQ What measurement functions does this caliper provide? The caliper supports external, internal, depth and step measurements; the M201.106 pocket caliper from Metav IndustryLine is designed to cover these four functions in one compact tool. Is the reading affected by parallax? No, the instrument features a parallax-free reading system so that readings remain consistent even when the viewing angle varies. What accuracy and standard compliance can be expected? The analogue instrument complies with DIN 862 and offers a vernier resolution of 0.05 mm suitable for workshop and inspection tasks. Does the caliper include features for repeated checks? Yes, the locking screw secures measurements for repeat checks, and the monoblock construction reduces play for reproducible results. How is the caliper delivered and stored? The M201.106 is supplied in a transport case and includes a thread table on the reverse for quick reference during inspection work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper For Outside, Inside And Step Measurements, Hardened Stainless Steel, Fine Adjustment, DIN 862 - Metav IndustryLine
Take advantage of a workshop-grade tool that combines robust monoblock construction, hardened stainless steel and a finely tuned vernier for dependable everyday measuring. Choose direct procurement via Metav Werkzeuge or consult Metav’s specialists for specification support. M201.310 Workshop caliper — 200 mm analogue caliper with fine-adjustment (Metav IndustryLine) The M201.310 Workshop caliper is an analogue measuring instrument designed for general machine‑shop and metalwork tasks, offering a 200 mm measuring range and a fine‑adjustment carriage for controlled, repeatable measurement. 200 mm workshop caliper range Analogue vernier, fine-adjustment carriage Hardened stainless steel, matt-chromed scale Designed for external, internal and step measurements Dependable workshop precision for everyday control Built to the DIN 862 workshop standard, this caliper delivers the range and stiffness that workshops need for routine quality checks. The 200 mm measuring span represents the practical balance between reach and rigidity, making the instrument well suited to general machine‑building and metal‑working tasks. The monoblock construction increases resistance to twist and wear, which improves repeatability for cyclical measurements and reduces setup time during production runs. Clear mechanical graduation and controlled sliding action The analogue vernier arrangement gives mechanically verifiable graduations: a dual-scale configuration (upper scale 1/1000" and lower scale 1/50 mm) provides fine reading capability with a bottom-scale resolution equivalent to 0.02 mm, the recognised industrial standard for mechanical verniers. The fine‑adjustment carriage allows small, smooth movements so measurements can be taken without overshoot, improving consistency when gauging fits, diameters or step heights. Durable materials and workshop‑ready finishing Manufactured from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and keeps reflective glare to a minimum for easier reading under workshop lighting. The material selection and surface finish reduce long‑term wear on the measuring faces and the scale, preserving accuracy and minimising maintenance interventions over the product life cycle. Versatile measuring functions for common shop tasks Configured for external, internal and step measurements, the instrument covers the four essential caliper operations required in daily shop work. The straightforward mechanical design makes interpretation immediate and training minimal, so workers can focus on process control rather than instrument complexity. Where mechanical vernier evidence is preferred over electronic readouts, this type keeps data interpretation transparent and audit‑friendly. For robust, workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and direct procurement from Emmerich. Technical data SKU: M201.310 GTIN: 4054469101309 Brand: Metav IndustryLine Standard: DIN 862 Numbers / Core technical data Measuring range: 0–200 mm Jaw length: 60 mm Vernier / nonius: top 1/1000", bottom 1/50 mm Customs tariff number: 90173000 Special features / Design Monoblock design Hardened stainless steel, matt-chromed scale Fine-adjustment carriage Analogue vernier (mechanical) No pointed measuring tip (without tip) Suitable for external, internal and step measurements FAQ What measuring range does this caliper cover? The M201.310 workshop caliper covers a measuring range of 0–200 mm, making it a standard workshop instrument for general machine‑building measurements. How precise is the analogue graduation on this caliper? The instrument uses a dual vernier: the lower scale corresponds to a 1/50 mm graduation (≈0.02 mm), aligning with common mechanical vernier precision in industrial use. Is the caliper suitable for internal and step measurements? Yes; the design is intended for external, internal and step measurements, so it handles the typical set of shop measurement tasks. What material is used for the measuring faces and scale? The caliper is made from hardened stainless steel with a matt‑chromed scale to enhance durability and reduce glare during reading. Does the M201.310 include a fine‑adjustment mechanism? Yes; a fine‑adjustment carriage is fitted to permit controlled sliding and precise setting of the jaws during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper Pocket Analog 0.05mm Resolution Monoblock Stainless Steel 4-Function With Locking Screw, DIN 862 - Metav IndustryLine
Compact precision meets everyday workshop use: a stainless monoblock design with a 200 mm range and 0.05 mm vernier gives reliable checks, while the locking screw and reverse thread table speed up repetitive tasks. Order directly via Metav Werkzeuge or consult our experts for clarification. TOP pocket caliper 200 x 0.05 mm (stainless monoblock, matt chrome) — Metav IndustryLine The TOP pocket caliper 200 x 0.05 mm is a compact analogue caliper for workshop inspections and on-the-go measurement tasks, offering robust construction and four measurement functions suited to routine quality checks. 200 mm measuring range, 0.05 mm nonius Stainless monoblock frame, matt chrome finish Locking screw and thread table on reverse Four-measurement functions; DIN 862 compliant Faster inspections with workshop-grade precision This analogue gauge combines a 0.05 mm vernier graduation with a compact form factor to accelerate routine dimensional checks. The coarse but dependable resolution corresponds to the industrial benchmark for mechanical calipers and supports quick go/no-go decisions in production and maintenance environments. Thanks to the DIN 862 conformity and the clear vernier markings, readings are straightforward; the scale principle requires no batteries and keeps measurement workflow uninterrupted — ideal for operators who value immediate, repeatable results. Built for everyday handling and durability Constructed from stainless material in a single-piece monoblock frame with a matt chrome finish, the instrument resists workshop wear and corrosion while remaining light at around 0.22 kg. A sturdy locking screw secures the jaw position for repeated transfers of a set value, and the included protective case ensures safe transport. This combination of robustness and portability makes the caliper suitable for trade technicians, maintenance crews and small-batch production where equipment must be taken to the job and back without compromise. Clear functionality and practical extras for measurement tasks The caliper accommodates the four classic measuring methods — external, internal, depth and step — enabling versatile use across components and assemblies. A thread table printed on the reverse provides quick reference for common screw sizes, reducing the need to consult separate charts during assembly or repair. The instrument’s analogue design means straightforward operation for users familiar with vernier calipers, while the dual-scale vernier markings support fine readings without electronic dependency. The result is a dependable, low-maintenance measuring tool that integrates easily into workshop routines. For practical workshop measurement, contact Metav Werkzeuge for personalised advice or obtain the TOP pocket caliper from Metav Werkzeuge’s Emmerich stock for prompt dispatch and professional support Technical data Article number: M201.075 GTIN: 4054469100470 Weight: 0.22 kg Core data Measuring range: 0–200 mm Resolution/vernier: 0.05 mm Standard: DIN 862 Design & features Material: stainless steel (INOX) Monoblock frame, matt chrome finish Locking screw Four measurement functions: external, internal, depth, step Thread table on reverse Delivered in protective case FAQ How precise is the TOP pocket caliper for routine checks? The TOP pocket caliper from Metav IndustryLine provides a 0.05 mm vernier graduation, which is the common industrial accuracy for mechanical calipers and well suited to standard workshop quality control. Can this caliper measure internal and external dimensions? Yes — the instrument supports four-measurement functions: external, internal, depth and step measurements are all possible with this pocket caliper (SKU M201.075). Is the caliper suitable for use in corrosive workshop environments? The caliper’s stainless (INOX) monoblock construction and matt chrome finish enhance resistance to corrosion, making it appropriate for typical workshop and maintenance conditions. Does the caliper come with any accessories helpful on the shop floor? The TOP pocket caliper includes a thread table on the reverse for quick reference and is supplied in a protective case for transport and storage. Which standard governs the caliper’s construction and marking? The device is manufactured in accordance with DIN 862, ensuring that scale division, vernier design and general features meet recognised workshop standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper Pocket Caliper 0.02mm Resolution, Monoblock Matt Chrome, Four-Point, Case - Metav IndustryLine
Take advantage of a compact, workshop-ready measuring tool that combines a 200 mm measuring range, 0.02 mm vernier resolution and a corrosion‑resistant stainless steel monoblock construction for reliable daily use; order the caliper directly via Metav Werkzeuge for fast delivery and expert advice. Metav IndustryLine Pocket Vernier Caliper M201.046 — 200 mm, 0.02 mm, matt chrome monoblock A Metav IndustryLine Pocket Vernier Caliper M201.046 designed for compact, precise mechanical measurements in workshop and on-site inspection tasks. 200 mm measuring range, robust pocket format 0.02 mm vernier resolution for precise readings Matt chrome monoblock in stainless steel Locking screw and four measurement functions Compact reach with workshop-grade reproducibility The instrument is classified in the standard range for calipers, offering a 200 mm span that balances reach and rigidity—ideal for routine machine‑shop and metalwork tasks where one-handed operation matters. The 0.02 mm vernier graduation provides a measurable step up from coarse instruments, enabling repeatable outside and inside measurements with industrially acceptable tolerances. This combination reduces setup rework and supports faster quality checks without excessive handling. Four measurement modes that speed up inspection Equipped for outside, inside, depth and step measurements, the caliper delivers the versatility required for small components and assemblies. The locking screw secures readings for transfer and marking, while the monoblock stainless steel frame maintains alignment across repeated use. The compact format and low weight make the tool easy to carry, while the robust construction minimises the influence of bending and wear on measurement integrity. Clear vernier readout and standardised traceability The analogue vernier scale gives an immediate, tactile reading method that many technicians prefer for quick checks and comparison tasks. Conforming to DIN 862 ensures the caliper meets recognised tolerance and production standards, supporting consistent documentation in quality processes. The mechanical design avoids battery dependence and the vernier resolution supports straightforward interpretation for operators familiar with traditional measuring techniques. Ready for transport and low-maintenance operation Finished in matt chrome to resist fingerprints and moderate corrosion, the caliper is delivered in a protective transport case suitable for workshop movement. Routine care is limited to keeping the measuring faces clean, occasional light lubrication of the sliding surfaces and storing the instrument protected from shocks—measures that preserve accuracy and extend service life. This practicality supports a low total cost of ownership and dependable availability at the bench. Contact Metav Werkzeuge today to request the Metav IndustryLine Pocket Vernier Caliper M201.046 and receive application advice from a precision partner based in Emmerich. Technical data Article number: M201.046 GTIN: 4054469100333 Material: inox (stainless steel) Measuring range: 0–200 mm Resolution: 0.02 mm Weight: 0.22 kg Standard: DIN 862 Type: analogue vernier caliper Locking screw: yes Four measurement functions: outside, inside, depth, step Finish: matt chrome monoblock Delivery: transport case included Facts Category: calipers Nonius specification: 1/1000" (top) and 1/50–49 mm (bottom) Suitable for workshop and inspection use Pocket format for portability No battery required Special features Monoblock design for increased stability Matt chrome surface for corrosion resistance Protective transport case for safe storage and movement Conforms to DIN 862 for standardised measurements FAQ How accurate is the caliper and what resolution does it offer? The caliper provides a vernier resolution of 0.02 mm, delivering accuracy suitable for standard workshop and quality‑control tasks; reproducibility is supported by the monoblock stainless steel construction and DIN 862 conformity. Which measurement tasks can be performed with this instrument? The tool supports four measurement modes — outside, inside, depth and step — making it suitable for component checks, small assembly inspections and depth gauging in general metalworking. Is the caliper ready for transport and field use? Yes. The caliper is supplied in a protective transport case and features a matt chrome finish to resist handling wear and moderate corrosion during daily use. Does the caliper require batteries or electronic calibration? No. This is an analogue vernier caliper without electronic components, so no batteries are required; accuracy is maintained through mechanical care and correct handling. What is the exact model designation and who supplies it? The instrument is the Metav IndustryLine Pocket Vernier Caliper M201.046, supplied by Metav Werkzeuge under the Metav IndustryLine brand. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper Pocket Vernier 0.05mm Resolution, Stainless-Steel Pocket Case, Four-Point Measurement - Metav IndustryLine
Benefit from robust tool‑steel construction, a 0.05 mm vernier resolution and a fine‑adjustment thumbwheel for repeatable readings; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Pocket Caliper M201.043 — Analogue 0–200 mm, 0.05 mm, Tool Steel (Metav IndustryLine) The Pocket Caliper M201.043 is a compact analogue caliper designed for workshop and service measurements, offering a Standard 0–200 mm range with fine adjustment for controlled, repeatable readings. Analogue vernier, 0.05 mm resolution Fine adjustment for precise readings Four-measurement: inside, outside, depth, step Matt-chrome finish on tool steel Precision that supports consistent quality control The M201.043 pocket caliper combines an analogue vernier with a 0.05 mm scale pitch to deliver decisive readings for routine inspection tasks. The integrated fine adjustment thumbwheel reduces overshoot and allows measured closing speed to be controlled, converting a manual instrument into a reliable daily tool. Because the caliper is an analogue instrument with a traditional vernier, interpolation remains intuitive while the vernier layout supports quick visual checks on production parts. The four measurement functions—external, internal, depth and step—mean a single gauge replaces several workshop tools, improving throughput and reducing handling time. Compact design that balances reach and stiffness Classified in the Standard measuring-range category (up to 300 mm) the 0–200 mm span is optimised for everyday machining and metalwork: it offers the best compromise between reach and rigidity for benches and service trolleys. The compact profile and the relatively low mass (approx. 0.23 kg) make the caliper easy to manoeuvre in tight setups while the tool‑steel construction and matt‑chrome finish resist shop wear and light corrosion. Shorter jaw lengths and a narrow frame aid access to confined areas and support reproducible clamping when measuring small to medium components. Practical features that speed up measurement cycles Practical workshop details reduce friction in daily use: the instrument includes a depth gauge for slot and flange checks and a clear vernier arrangement for straightforward reading. The four-measurement capability simplifies task planning by enabling inside, outside, depth and step measurements with the same tool, cutting instrument swaps and saving cycle time. The engraved vernier markings and the controlled feed of the fine adjustment help reduce operator‑induced variation, giving more consistent data for in‑process checks or routine quality rounds. Simple care and where this caliper performs best For long service life, keep the sliding surfaces free of chips and lightly lubricated, protect the scale from heavy shocks and store the caliper dry. The M201.043 pocket caliper is particularly suited to general engineering workshops, maintenance departments and mobile service engineers who need a compact, robust measuring instrument that performs reliably for standard inspection tasks. Metav’s positioning as a precision partner ensures availability of compatible accessories and replacement parts across Europe, supporting continued tool performance and procurement efficiency. Discuss the M201.043 pocket caliper with Metav Werkzeuge to ensure workshop compatibility and to arrange procurement or specification support. Technical data Article number: M201.043 GTIN: 4054469100302 Category: Messschieber (calipers) Label: Pocket caliper 200 x 0.05 mm, tool steel, matt chrome Weight: 0.23 kg Material: Tool steel Finish: Matt chrome Measuring range: 0–200 mm Resolution: 0.05 mm Type: Analogue vernier caliper Depth gauge: yes Fine adjustment: yes Four-measurement capability: inside, outside, depth, step Nonius: 1/128" top and 1/20-39 mm bottom Jaw lengths: 50 mm / 17 mm Tariff number: 90173000 Numbers / Core technical data Weight: 0.23 kg Measuring range: 0–200 mm Resolution: 0.05 mm Jaw lengths: 50 mm / 17 mm GTIN: 4054469100302 Tariff number: 90173000 Design / Special features Tool steel body Matt‑chrome plated surface Analogue vernier scale Fine‑adjustment thumbwheel Four‑measurement design (inside, outside, depth, step) Depth gauge included Pocket caliper format Nonius specification included FAQ What resolution and reading accuracy does this caliper provide? The M201.043 pocket caliper features a 0.05 mm vernier division and is an analogue instrument; this resolution is suitable for standard workshop inspection and assembly tasks. Which measurement types can be performed with the caliper? This caliper supports four measurement modes: external, internal, depth and step measurements, allowing versatile use across a range of components. Is the instrument suitable for everyday workshop use? Yes; the pocket caliper from Metav IndustryLine is designed for routine machine‑shop and maintenance work where a compact, robust and easy‑to‑handle gauge is required. How does the fine adjustment help in measurement? The fine‑adjustment thumbwheel permits controlled sliding and precise closing of the jaws, reducing overshoot and improving repeatability during delicate measurement tasks. What maintenance is recommended to preserve accuracy? Keep the scale and sliding faces clean, protect from heavy impacts, apply light lubrication to sliding surfaces and store the caliper in a dry place when not in use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper Without Probe Fine Adjustment Hardened Stainless Steel 0.05mm Resolution, Supplied in Case - Metav IndustryLine
Robust, low‑maintenance shop measurement with hardened stainless steel construction and a fine‑adjustment slide for repeatable results; combine 0–200 mm reach with 0.05 mm vernier precision for reliable everyday inspection. Order the workshop caliper directly via Metav Werkzeuge or request application advice from our consultants. Workshop caliper M201.320 — analogue vernier, 0–200 mm, hardened stainless steel The Workshop caliper M201.320 is an analogue vernier caliper designed for universal shop use, offering a compact jaw length and a fine‑adjustment mechanism for controlled, repeatable measurements in standard workshop environments. Hardened stainless steel construction 0–200 mm measuring range Analogue vernier, 0.05 mm resolution Fine‑adjustment screw for exact sliding Dependable measurement range for everyday workshop tasks The M201.320 is classified in the Standard size class thanks to its 0–200 mm range, which makes it a versatile instrument for general engineering, metalwork and maintenance tasks. The combination of compact jaw geometry and monoblock construction reduces flexing during handling, delivering consistent readings across typical shop workpieces. This design balances reach with handling comfort, supporting efficient throughput in repetitive inspection routines while maintaining robust mechanical stability. Vernier system and fine adjustment for repeatable readings Equipped with an analogue vernier that features a 1/20 mm bottom scale, the caliper provides a practical 0.05 mm reading increment suitable for standard quality control. The additional 1/128" inch scale allows cross‑referencing in mixed‑unit environments. The integrated fine‑adjustment screw permits controlled sliding for careful closing on features, reducing reading variability caused by hand pressure. Together these elements make the instrument suitable for machinists who require clear, repeatable measurements without electronic dependency. Hardened materials and workshop durability Constructed from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and wear from daily shop use while keeping scale legibility high. The monoblock slide and robust jaw geometry are engineered for frequent operation, reducing maintenance cycles and downtime. Conformity with DIN 862 (for jaw lengths up to 200 mm) ensures the tool meets recognised mechanical measurement standards, supporting traceable inspection procedures and predictable performance in industrial settings. Practical handling and application focus The instrument’s modest jaw length and balanced form factor make it straightforward to handle during repetitive checks of shafts, housings and assembled fixtures. As an analogue workshop caliper, it requires no batteries or electronics, which simplifies storage and long‑term reliability under workshop conditions. The clear vernier layout and tactile fine‑adjustment help technicians achieve reproducible results during incoming inspection, set‑up verification and routine maintenance tasks. For dependable shop‑floor precision choose the Metav IndustryLine caliper M201.320 — contact Metav Werkzeuge for tailored advice, specification checks or to request delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.320 GTIN: 4054469101408 Manufacturer: Metav IndustryLine Category: Calipers Facts Measuring range: 0–200 mm Resolution: 0.05 mm (vernier 1/20 mm) Vernier: 1/128" (top), 1/20 mm (bottom) Jaw length: 60 mm Tariff number: 90173000 Special features Material: hardened stainless steel with matt‑chromed scale Monoblock construction Fine‑adjustment screw included Analogue vernier with inch and mm scales Complies with DIN 862 for jaw length up to 200 mm FAQ How precise is the reading on this caliper? The workshop caliper M201.320 delivers 0.05 mm resolution via its vernier (1/20 mm) and is intended for standard shop‑floor precision checks. Is the instrument suitable for both inside and outside measurements? Yes, the M201.320 is designed for outside, inside and step measurements using the appropriate jaws and the analogue vernier scale. Does the caliper meet a recognised standard? The caliper conforms to DIN 862 for jaw lengths up to 200 mm, ensuring standardised mechanical measurement characteristics. What advantages does the fine‑adjustment provide? The fine‑adjustment screw on the M201.320 enables controlled sliding and repeatable contact pressure, improving measurement consistency during repetitive inspection tasks. Can the vernier be read in inches and millimetres? The instrument includes both a 1/128" inch scale and a 1/20 mm vernier, allowing cross‑reference between imperial and metric readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Pocket Caliper 0.05mm Nonius, Moment Lock, Monoblock, Depth Rod, Supplied in Case - Metav IndustryLine
Take advantage of a compact yet robust measuring solution with a 200 mm stainless steel pocket caliper that delivers 0.05 mm vernier precision and repeatable readings thanks to a moment lock; order directly via Metav Werkzeuge or contact the consultants for technical advice. Pocket Caliper M201.042 by Metav IndustryLine — 200 mm, 0.05 mm vernier with moment lock The Pocket Caliper M201.042 is a compact, DIN 862‑compliant caliper designed for workshop and field measurement, offering a balance of reach and rigidity for standard mechanical and maintenance tasks. Compact 200 mm workshop caliper Vernier resolution 0.05 mm and inch scale Moment lock for repeatable readings Depth gauge and four-way measurement Accurate readings for routine and precise checks The compact design combines a 200 mm measuring range with a vernier resolution of 0.05 mm, offering the proven accuracy expected under DIN 862. The mechanical vernier and an inch indicator provide direct, traceable readings without reliance on batteries or electronics, which reduces downtime in field and workshop environments. This analogue measurement principle supports fast, consistent checks of external dimensions, internal bores, step heights and depths, ensuring that routine quality controls run smoothly and predictably. Robust design for everyday workshop use Constructed from stainless steel with a monoblock frame and matt chrome finish, the instrument resists corrosion and maintains stability during regular handling. The compact format classifies it as a standard workshop caliper — the common balance between reach and stiffness — making it suitable for general engineering, maintenance and fabrication tasks. The compact jaws and protected profile permit reliable use in confined spaces while preserving measurement integrity over repeated cycles. Practical handling and repeatable measurement workflow A moment lock secures the sliding jaw at the set position, enabling reproducible results when transferring measurements or checking several identical parts. The tool incorporates a depth gauge and, thanks to four‑way measurement capability, supports internal, external, step and depth measurements without additional accessories. A thread reference chart is printed on the reverse side to support quick workpiece identification and expedite inspection routines. Ready for use and transport The caliper is supplied with a protective case for secure transport and storage and includes practical on‑tool aids for daily workflow. Its analogue construction requires no batteries and is immediately usable on the shop floor, while the durable finish and monoblock construction reduce the risk of wear‑related drift. For operations that value straightforward reliability and minimal maintenance, this instrument provides a dependable measuring companion. For dependable workshop measurement, select the Metav IndustryLine Pocket Caliper M201.042 — contact Metav Werkzeuge GmbH in Emmerich for expert advice and delivery arrangements at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.042 GTIN: 4054469100296 Norm: DIN 862 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.05 mm Vernier inch scale: 1/128" top (inch indication) Measurement types: external, internal, step, depth Special features Material: stainless steel Finish: matt chrome plated Monoblock construction Moment lock for repeatable readings Depth gauge integrated Thread chart on reverse side Analogue pocket caliper design Delivered in a protective case Pocket caliper intended for standard workshop use Jaw tip lengths: 50/17 FAQ How precise is the caliper for workshop checks? The caliper achieves a vernier resolution of 0.05 mm, suitable for standard workshop measurements in accordance with DIN 862; it provides reliable repeatability for everyday quality control. Can the tool measure depths and internal bores? Yes, the instrument features an integrated depth gauge and supports four‑way measurement (external, internal, step and depth), enabling versatile inspection tasks without additional tools. Is the caliper suitable for field and shop use? The stainless steel, matt chrome finish and monoblock design provide robustness for both workshop and field environments; the protective case aids secure transport. Does the caliper include any reference aids? A thread reference chart is printed on the reverse side to assist with quick identification of common thread sizes during inspection work. Is battery power required? No — this is an analogue vernier caliper that operates without batteries, ensuring immediate usability and low maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Pocket Caliper 0.05mm Resolution, Monoblock Stainless Steel, Moment Lock, DIN 862, Depth Rod, in Case - Metav IndustryLine
Benefit from a compact, workshop-ready caliper that combines stainless-steel durability, a 200 mm measuring range and a repeatable moment lock for consistent contact pressure; order directly via Metav Werkzeuge or consult the technical team for specification support. Pocket Caliper TOP (M201.076) — Metav IndustryLine, 200 mm / 0.05 mm, moment lock The Pocket Caliper TOP (M201.076) is a compact, DIN 862-compliant analogue caliper intended for standard machine‑shop and metalworking measurements up to 200 mm. Compact pocket caliper 200 mm range Analogue vernier with 0.05 mm resolution Moment lock for repeatable pressure control Matt chrome stainless monoblock construction Reliable workshop precision for everyday measurements The TOP pocket caliper delivers consistent results where repeatability matters. Built to DIN 862, the tool combines a 0–200 mm measuring range with an analogue vernier that provides 0.05 mm resolution, making it well suited to the typical demands of machine shops and maintenance workshops. The hardened monoblock frame resists bending and retains alignment during regular use, which reduces re‑checks and increases throughput on routine inspection tasks. This focus on measurable performance supports faster decision-making in production and quality control. Secure handling and durable construction for frequent use Ergonomics and longevity are prioritised in the design: the caliper features a moment lock that fixes the slider at a defined clamping torque, preventing variation from differing hand pressure and ensuring repeatable contact force across measurements. The body is manufactured from stainless steel with a matt chrome finish and fully hardened for wear resistance, while the compact format and low weight (approx. 0.24 kg) allow single-handed use and easy transport. These characteristics reduce handling fatigue and contribute to fewer measurement errors during long shifts. Versatile measurement modes for workshop tasks This analogue caliper supports four measuring functions — outside, inside, depth and step measurements — which condense multiple inspection routines into a single instrument and save tool-up time. The integrated depth probe and the jaw geometry (jaw length 50 / 17 mm) cover typical component checks without changing tools. Dual vernier scales provide metric and imperial referencing where required, and the presence of a thread reference table on the reverse side simplifies certain fastener checks. The sum is a compact instrument that increases operational flexibility while keeping the workflow lean. Practical benefits and quality assurance The combination of a hardened monoblock construction, clear vernier reading and the moment locking mechanism reduces measurement scatter and the need for repeated checks, delivering measurable time savings. The caliper is a standard-class instrument for shops that require dependable, repeatable measurements without the additional complexity of digital data transfer. A transport case is included for safe storage and shipment, keeping the instrument protected between uses. For dependable, workshop-grade precision from the TOP series, contact Metav Werkzeuge for tailored advice and immediate supply from Emmerich. Technical data Article number: M201.076 GTIN: 4054469100487 Norm: DIN 862 ECLASS: 21170344 Facts Measuring range: 0–200 mm Resolution: 0.05 mm Weight: 0.24 kg Jaw length: 50 / 17 mm Four measuring functions: outside, inside, depth, step Depth gauge: yes Special features Material: stainless steel, matt chrome plated, fully hardened Moment lock for repeatable clamping force Monoblock construction Analogue dual vernier scales (metric and imperial) Thread table on reverse side Delivery in transport case Labelled as TOP series FAQ Is the caliper suitable for everyday workshop use? The Pocket Caliper TOP (M201.076) is designed for standard workshop and metalworking measurements, offering a 0–200 mm range and robust construction for frequent use. What measuring functions are available with this caliper? The instrument provides four measuring functions — outside, inside, depth and step — enabling a wide range of routine inspection tasks with the Pocket Caliper TOP (M201.076). How repeatable are measurements with this model? Repeatability is enhanced by the built‑in moment lock and the hardened monoblock frame, which together reduce variation from differing hand pressure when using the Pocket Caliper TOP (M201.076). Is the caliper delivered with a case and any printed references? Yes, the caliper is supplied with a transport case and includes a thread reference table on the reverse side, as stated in the product details for the Pocket Caliper TOP (M201.076). Does this analogue caliper include digital data output? The Pocket Caliper TOP (M201.076) is an analogue instrument with dual vernier scales; no digital data output is specified for this model. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scriber Caliper With Replaceable Carbide Scriber And Roller, 0.05mm Resolution, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of durable materials, a replaceable carbide scribing tip and precise analogue reading for consistent layout work in production environments; order the scribing caliper directly via Metav Werkzeuge or ask the consultants for specification advice. Scribing Caliper with Roller M201.151 – 200 mm, 0.05 mm (Metav IndustryLine) The Scribing Caliper with Roller M201.151 is an analogue stainless-steel marking and measuring instrument designed for precise layout and scribing tasks in machine shops and metalworking production. Replaceable carbide scribing tip 200 mm measuring range, standard workshop length 0.05 mm scale resolution, analogue vernier Stainless steel, matt chrome finish with case Consistent layout and repeatable scribing The scribing caliper is engineered to turn layout work into a reproducible process. The replaceable carbide tip provides a hard-wearing contact point that retains a sharp mark over many cycles, while the integrated roller ensures steady contact against profiles when following edges or marking curved surfaces. With a 200 mm measuring range, the instrument fits the Standard class for workshop use, offering the best compromise between reach and rigidity for common components. The 0.05 mm vernier resolution corresponds to the typical analogue industry standard for robust repeatable measurements and clear layout lines. Built for everyday workshop durability Robustness is central to the design: the body is made from stainless steel with a matt chrome finish, providing corrosion resistance and a low-reflective surface for comfortable use under workshop lighting. A positive locking screw secures the slider to maintain set positions during marking. The solid construction, combined with a modest weight, makes handling straightforward while resisting the knocks of daily use. Protective transport in a case preserves calibration and tip condition during storage and movement between job sites. Practical handling, simple maintenance Reading and marking are kept efficient through the analogue vernier system, which avoids battery dependence and simplifies long-term maintenance. Replacing the scribing tip is a straightforward procedure that restores marking performance without replacing the whole instrument, reducing lifecycle costs and waste. The straightforward mechanical design means familiar operation for machinists and technicians, with little training required to achieve accurate, repeatable layout work. For durable, precise marking in the workshop, choose the Metav IndustryLine Scribing Caliper M201.151 — contact Metav Werkzeuge in Emmerich for purchasing or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.151 GTIN: 4054469100777 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.05 mm Scale type: analogue vernier Weight: 0.2 kg Special features Material: stainless steel, matt chrome-plated Replaceable carbide scribing tip Roller marking function Locking device (fixing screw) Delivery: protective case FAQ How precise is the marking made with this caliper? The scribing caliper delivers a vernier resolution of 0.05 mm, suitable for standard workshop measurements and accurate layout marking with repeatable results. Can the scribing tip be replaced when worn? Yes, the instrument features a replaceable carbide scribing tip, allowing simple renewal of the marking point without replacing the whole caliper. Is this caliper robust enough for daily shop use? The tool is made from stainless steel with a matt chrome finish and a locking screw, and it is supplied in a protective case to withstand everyday handling in the workshop. Which measuring range category does this instrument belong to? With a maximum range of 200 mm, the caliper falls into the Standard category (100–300 mm), offering a balance of reach and stiffness for general machine‑shop tasks. Is an ISO 17025 calibration certificate supplied with the instrument? No ISO 17025 certificate is specified for this item; it is supplied as a standard factory instrument. If an accredited calibration certificate is required, please request details before purchase. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Vernier Caliper with Dial Lock, Hardened Tips, 0.1mm Resolution - Metav IndustryLine
Take advantage of the 0.1 mm vernier resolution, hardened measuring tips and matt‑chromed scale to ensure repeatable workshop measurements; order directly via Metav Werkzeuge or consult our specialists for application advice. Zirkel caliper M201.171 — 200 mm analogue caliper with 0.1 mm vernier (Metav IndustryLine) The Zirkel caliper M201.171 is an analogue, compass‑style caliper designed for general engineering and metalworking tasks up to 200 mm, offering robust jaws and a secure locking screw for stable readings Analogue vernier 0.1 mm resolution Hardened measuring tips for long life Matt‑chromed scale for low glare readings Locking screw for stable measurement Stable, workshop‑grade precision for everyday measurement The instrument provides analogue vernier reading with a resolution of 0.1 mm, making it a reliable choice for routine checks and machining set‑ups where quick, repeatable readings are required. The vernier system is mechanical and does not rely on batteries, which reduces downtime and simplifies workshop use. For users familiar with vernier operation, the scale allows straightforward subtraction and transfer of values; for those new to the method, the vernier principle can be explained in a few steps and delivers consistent results when the sliding jaw is fixed with the locking screw. This balance of simplicity and repeatability supports efficient process control on the shop floor. Built for repeatability: hardened steel and anti‑glare scale Constructed from special hardened steel, the body and jaws resist wear while the hardened measuring tips maintain accurate contact geometry over repeated cycles. The matt‑chromed scale and vernier minimise reflections under strong workshop lighting, improving legibility and reducing read‑back errors. The locking screw (Feststell) secures the slider after adjustment, which is especially useful when transferring measurements between fixtures or when measuring outside diameters with the compass arms. Classified as a Standard caliper (100–300 mm class) due to its 200 mm measuring range, the design offers the best compromise between reach, stiffness and single‑handed handling for everyday machine‑shop tasks. Practical handling and typical applications in the workshop As a compass‑style analogue caliper, the tool is particularly suited to tasks such as setting up fixtures, measuring external diameters and checking component steps where a robust mechanical instrument is preferred over electronics. The hardened tips and solid shaft reduce sensitivity to knocks and abrasion, so the instrument remains dependable in a busy environment. The simple mechanical construction also eases maintenance: occasional cleaning and lubrication of the slide keep the instrument functioning accurately for extended periods. For quality assurance, the caliper integrates neatly into inspection routines where vernier measurements are an established method. For dependable workshop precision from the Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.171 GTIN: 4054469100845 ECLASS: 21170344 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.1 mm Operation: Analogue vernier reading Type: Compass‑style caliper Special features Material: special steel, hardened Scale: matt‑chromed vernier and scale Measuring tips: hardened Locking screw: Feststell for secure readings Classification: Standard caliper (100–300 mm class) FAQ How is the vernier scale read on this instrument? The vernier provides 0.1 mm steps; align the vernier line with the main scale to determine the fractional reading, then add the vernier value to the main scale to obtain the measurement with the caliper M201.171. What workshop tasks suit a compass‑style caliper? Typical uses include external diameter checks, step and depth transfers and fixture set‑up in general engineering and metalworking; the Standard‑range design offers reach and stiffness appropriate for routine machine‑shop work. Is the instrument robust enough for daily use? Yes, the hardened measuring tips and special hardened steel body ensure wear resistance; the matt‑chromed scale reduces glare and the locking screw secures measurements during transfer. Does the caliper come with a calibration certificate? The standard delivery does not include an ISO 17025 certificate by default; calibration options can be arranged if traceable certification is required for quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Watch-Type Caliper 0.01mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from 0.01 mm reading accuracy and versatile fourfold measurement within the compact 0–200 mm range; the analogue dial with a 38 mm face and locking screw supports repeatable, workshop-ready readings. Order the Dial Caliper directly via Metav Werkzeuge or consult our specialists if further advice is required. Dial Caliper TOP 200 x 0.01 mm — Analogue dial gauge with 0–200 mm range The Dial Caliper TOP 200 x 0.01 mm is an analogue measuring instrument designed for standard workshop and metalworking tasks, offering precise outside, inside, depth and step measurements across a versatile 0–200 mm span. Analogue dial, 0.01 mm resolution Four measurement functions Compliant with DIN 862 Locking screw and thread table Precision for routine workshop control and fine mechanics This instrument is tailored to the Standard measuring class (0–200 mm), which balances reach and rigidity for everyday machining and quality control. The 0.01 mm dial resolution provides a clear, incremental scale that speeds up inspection cycles while keeping measurement uncertainty low for typical production tasks. Compliance with DIN 862 supplies an established reference for expected accuracy and construction, making the gauge a dependable choice for mechanical workshops and small-series production where consistent repeatability matters. Robust handling that reduces rework and measurement variability The dial face of 38 mm diameter improves legibility compared with smaller dials, and the integrated locking screw secures the slide for transfer measurements and repeat checks. The instrument incorporates a thread table on the reverse for rapid reference during screw and thread work. Together these features convert the mechanical movement into practical advantages: fewer read-back errors, faster repeat measurements, and reliable clamping for comparative checks on the shop floor. Versatile fourfold measurement and straightforward interpretation Equipped for fourfold measurement — outside, inside, depth and step — this analogue gauge covers the common tasks that a workshop or toolroom requires, reducing the need for multiple specialised tools. The mechanical dial provides intuitive feedback and immediate visual confirmation of small deviations, which is particularly useful during setup or when scanning for wear. The combination of mechanical simplicity and a precise scale supports long-term serviceability and ease of use in environments where digital options are not required or desired. Contact Metav Werkzeuge for a tailored supply recommendation for the Metav IndustryLine Dial Caliper TOP 200 x 0.01 mm and to arrange procurement through our Emmerich site Technical data Article number: M202.144 GTIN: 4054469102382 ECLASS: 21170344 Category: Messschieber Facts Measuring range: 0–200 mm Resolution: 0.01 mm Dial diameter: 38 mm Norm: DIN 862 Analog reading Special features Four measurement functions (outside, inside, depth, step) Locking screw Thread table on reverse Feststellschraube present Gewindetabelle on back FAQ What is the measuring range of this caliper? This Dial Caliper TOP 200 x 0.01 mm offers a measuring range of 0–200 mm (SKU M202.144) suitable for standard workshop tasks. What resolution and readability does the instrument provide? The instrument provides a resolution of 0.01 mm via an analogue dial with a 38 mm face for clear visual readout. Which measurement types can be performed with this gauge? The gauge supports fourfold measurement: outside, inside, depth and step measurements, enabling versatile inspection routines. Does this caliper meet any industry standards? Yes; the caliper is manufactured in accordance with DIN 862, ensuring recognised construction and performance criteria for mechanical calipers. Is this instrument intended for workshop or precision-laboratory work? Classified in the Standard range (0–200 mm), the caliper suits general machine‑shop, toolroom and quality-control applications where a balance of reach and rigidity is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem kleinem Preis. HIGHLIGHTS Messbereich: bis 200mm Ablesung: 0,05mm Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Im Fluss messen Der Messbereich von 0 bis 200mm bringt die nötige Reichweite für typische Bauteile auf den Punkt. Prüfungen gelingen direkt am Werkstück, auch wenn Formen variieren. Im allgemeinen Maschinen- und Metallbau sorgt dieser Bereich für eine sichere Orientierung über den gesamten Prozess. Die Ergebnisse bleiben nachvollziehbar und konsistent. Das reduziert Nacharbeit und unterstützt saubere Übergaben zwischen Arbeitsschritten. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Ausführung Werksnorm Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Metav IndustryLine Werkstatt-Messschieber erfüllt die Anforderungen der Werksnorm in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Ausführungsdetails für Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.373 Zahlen zum Werkzeug: Messbereich: 0-200mm Gewicht: 0,8kg Norm: Werksnorm Schnabellänge: 60/36mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Ausführungen Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf es beim Messschieberkauf ankommt: Zusatzfunktionen wie Datenausgangsoptionen oder die Regelung der Messkraft sind neben der Genauigkeit und dem Messbereich essenziell. Der Gebrauch eines Messschiebers mit präzise abgestimmter Messkraft erweist sich insbesondere im Bereich der Qualitätssicherung und innerhalb von Laboren als vorteilhaft. Ferner darf man nicht vergessen zu prüfen, ob der Messschieber schon kalibriert sein muss. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden.
200mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Das 1989 gegründete Traditionsunternehmen für den Vertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem überzeugenden Preis. Im Fluss messen: 0 bis 200mm 200mm schaffen genau die Reichweite, die im Alltag am häufigsten gebraucht wird. Von der Vormontage bis zur Endprüfung bleibt der Zugriff auf relevante Maße erhalten. Der Bereich passt zu den Anforderungen im Maschinen- und Metallbau und sorgt für gleichmäßige Qualität. Messfolgen bleiben übersichtlich und planbar. Das reduziert Stillstände und hält Projekte auf Kurs. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Unser Werkstatt-Messschieber wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der Werksnorm. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Profi-Empfehlung: Führe Messungen immer unter gleichen Bedingung aus. Im Idealfall im einem Messlabor, das 20° Celsius vorhält. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Eigenschaften für Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.370 Fakten: Messbereich: 0-200mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 60mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Besonderheiten Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Zugleich mit der Präzision und dem Messbereich sind die Berücksichtigung von Features wie Datenexport und Messkraftkontrolle unerlässlich. Der Gebrauch eines Messschiebers mit präzise abgestimmter Messkraft erweist sich insbesondere im Bereich der Qualitätssicherung und innerhalb von Laboren als vorteilhaft. Ferner darf man nicht vergessen zu prüfen, ob der Messschieber schon kalibriert sein muss. Bereits bei der Zustellung ist eine Kalibrierung möglich, und für die Garantie der Prozesssicherheit sollte diese jährlich wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Werkstatt-Messschieber haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
200mm Workshop Caliper With Pointed Jaws 0.05mm Resolution Fine Adjustment Monoblock, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 200 mm measurement range, hardened stainless-steel construction and a smooth fine-adjustment screw for reliable, repeatable workshop measurements; order the caliper directly via Metav Werkzeuge or ask our consultants for tailored technical advice. M201.330 Workshop Caliper — 200 mm, hardened stainless steel, fine-adjustment (Metav IndustryLine) A M201.330 workshop caliper designed for standard workshop tasks up to 200 mm, offering vernier precision for external, internal and step measurements. 200 mm measurement range, workshop standard Hardened stainless steel with matt-chrome scale Fine-adjustment screw for precise positioning Monoblock design for enhanced rigidity Precision that suits everyday workshop control The 200 mm measurement span places this instrument firmly in the standard class of calipers, balancing reach and stiffness for general mechanical and metalworking tasks. The analogue vernier provides a practical reading resolution of 0.05 mm, which corresponds to the established industrial expectation for mechanical calipers and supports reliable dimensional checks on components, fixtures and assemblies. Where quick verification and straightforward repeatability matter, the scaled vernier and clear graduation reduce interpretation errors and keep inspection loops efficient. Built for durability and readability in production environments A hardened stainless-steel body with a matt-chrome scale resists wear and reduces glare, improving legibility under harsh workshop lighting. The monoblock construction increases structural stiffness so that measurements remain consistent during everyday handling and moderate knocks. Pointed measuring tips extend the tool’s usefulness for fine contact points and narrow grooves, while the overall build supports long-term durability and lower maintenance compared with plated or softer materials. Smooth handling increases measurement confidence The integrated fine-adjustment screw allows controlled closure of the jaws and precise positioning on the workpiece, preventing overrun and unwanted pressure that can distort readings. Dual vernier readings (imperial on the upper scale, metric on the lower) combine flexibility with clarity: the instrument carries a 1/128" indication on the upper vernier and 1/20 mm on the lower, making conversion-free checks possible when imperial and metric references are mixed. Conformity with DIN 862 for jaw length up to 200 mm ensures production compatibility and adherence to familiar workshop standards. Contact Metav Werkzeuge for specialised advice on the M201.330 workshop caliper — our Emmerich-based precision experts will help match the instrument to application requirements or provide supplementary technical documentation Technical Data Article number: M201.330 GTIN: 4054469101637 EClass: 21170344 Tariff number: 90173000 Brand: Metav IndustryLine Facts Measurement range: 0–200 mm Jaw length: 60 mm Resolution: 0.05 mm Vernier: 1/128" (upper) / 1/20 mm (lower) Special features Hardened stainless steel with matt-chrome scale Monoblock construction Fine-adjustment screw Pointed measuring tips Complies with DIN 862 for jaw length up to 200 mm Analogue mechanical vernier FAQ How precise is the M201.330 for routine workshop measurements? The M201.330 provides a vernier resolution of 0.05 mm and is built to deliver consistent repeatability for standard workshop control tasks up to 200 mm. Which measurement types can this caliper perform? It supports external, internal and step measurements, with specialised pointed tips for accessing narrow features. Is the scale readable in bright workshop lighting? Yes, the matt-chrome scale minimises reflection and, together with the hardened stainless-steel body, keeps graduations legible over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Workshop Caliper Without Tip 60mm Jaw 0.05mm Vernier Stainless Steel, DIN 862 - Metav IndustryLine
Benefit from the combination of stainless‑steel durability, precise 0.05 mm vernier reading and a compact 200 mm measuring range for smooth workshop control; order the caliper directly via Metav Werkzeuge or consult our advisors for specification support. Workshop Vernier Caliper M201.390 – 200 mm, 0.05 mm vernier (Metav IndustryLine) The Workshop Vernier Caliper M201.390 is a robust analogue caliper for everyday machine‑shop measurements up to 200 mm, designed for fast, repeatable checks in production and maintenance environments. Analogue vernier with 0.05 mm resolution Stainless steel body, matt chrome scale and vernier 200 mm measuring range for workshop applications 60 mm long jaws for stable external clamping Reliable workshop accuracy for everyday measurement The M201.390 delivers workshop‑grade precision with a vernier resolution of 0.05 mm (also readable as 1/128 inch), which aligns with common industrial practice for mechanical calipers. As a standard‑range instrument it covers the typical needs of machine shops and metalworking tasks without compromising stiffness or handling. Compliance with DIN 862 ensures that readings are comparable to established metrology expectations, so measurements taken for setup, in‑process checks or maintenance feed directly into quality control workflows with minimal interpretation required. Robust construction for daily workshop use A body of stainless steel with a matt‑chrome scale and vernier provides corrosion resistance and clear contrast for long service life. The 60 mm jaw length increases contact area for stable external measurements, reducing tilt and local deformation on softer workpieces. At approximately 0.7 kg, the caliper balances feel and solidity, making one‑handed operation comfortable while maintaining the stiffness needed for reproducible results. These construction choices lower the need for frequent replacement and support reliable production throughput. Simple vernier operation speeds routine checks Being an analogue, non‑electronic tool, the caliper avoids dependency on batteries or electronics and is immediately available for rapid checks. The vernier scale principle converts fine graduations into a readable fractional scale—readable to 0.05 mm—so routine dimensional checks can be executed quickly without menu navigation. This directness translates into time savings for repetitive inspection tasks and a lower lifecycle cost compared with battery‑powered alternatives, while still offering the precision expected in everyday quality control. Practical benefits for workshop workflows Integrating this caliper into workshop routines improves first‑article checks, quick go/no‑go examinations and fitting tasks through its combination of reach and robustness. The 200 mm measuring range is the workshop standard that balances reach with rigidity, making it suitable for components, housings and assemblies commonly encountered in mechanical engineering and maintenance. The straightforward design facilitates operator training and consistent measurement technique, which supports traceable processes and reduces scrap from incorrect fits. Contact Metav Werkzeuge for personalised advice on the Metav IndustryLine 200 mm vernier caliper and secure dependable delivery from Emmerich Technical Data SKU: M201.390 GTIN: 4054469102085 Label: Werkstatt-Messschieber ohne Spitze 200x60x0,05mm rostfrei Facts Measuring range: 0–200 mm Resolution: 0.05 mm (1/128 inch) Weight: 0.7 kg Jaw length: 60 mm Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt chrome plated Type: Analogue vernier caliper Standard: DIN 862 Design: without tip (no spike) Brand: Metav IndustryLine FAQ How precise is the caliper for general workshop use? The M201.390 provides a vernier resolution of 0.05 mm, which corresponds to the industrial standard for analogue calipers and is suitable for most machine‑shop and workshop measurements. Can this caliper be used for internal and external measurements? Yes, the analogue vernier caliper design supports internal and external measurements as well as depth checks within its 0–200 mm range. Is a calibration certificate supplied with the tool? This workshop caliper is not listed as delivered with an ISO 17025 certificate; standard factory specification applies unless an explicitly calibrated variant is requested. What makes the construction suitable for workshop environments? The stainless‑steel construction with matt‑chrome scale and vernier offers corrosion resistance and visual contrast, while the 60 mm jaws and overall stiffness ensure reproducible contact during daily use. How does the analogue vernier compare to a digital caliper in a production setting? Analogue vernier calipers like the M201.390 require no batteries, offer immediate readability for trained staff and provide a durable option for routine checks; digital calipers can offer finer resolution and data output but add complexity and maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Workshop Precision Caliper With Pointed Jaws 0.05mm Resolution, DIN 862 - Metav IndustryLine
Take advantage of a workshop instrument that combines robust stainless steel construction, a practical 200 mm measuring range and a reliable 0.05 mm vernier resolution for consistent routine control. The caliper’s matt‑chrome scale and DIN 862 compliance support reproducible readings and reduced rework. Order the M201.393 directly via Metav Werkzeuge or consult our specialists for application advice. M201.393 Workshop Vernier Caliper — 200 mm, 0.05 mm resolution (Metav IndustryLine) M201.393 is a purpose-built workshop caliper for everyday mechanical measuring tasks, offering analogue vernier precision and durable stainless‑steel construction. Robust stainless steel construction 200 mm measuring range 0.05 mm vernier resolution Conforms to DIN 862 Reliable measurement for everyday workshop tasks The M201.393 is engineered as a practical workshop caliper that balances reach and stiffness with a 200 mm measuring range appropriate for typical machine‑shop and metalworking tasks. The analogue vernier system provides a clear 0.05 mm graduation, which aligns with industrial expectations for mechanical calipers and supports rapid, repeatable checks during production. Because the scale and vernier are matt chrome plated, reflections are minimised and legibility is improved in workshop lighting, reducing reading errors and speeding up inspection routines. Durable design that tolerates rough handling Constructed from stainless steel, the slide and jaws resist corrosion and stand up to the knocks of daily use. The asymmetric jaw lengths (60/40) combine firm external‑measuring faces with compact internal jaws for confined spaces; the 60/40 jaws improve access to shoulders and grooves without sacrificing stability. The instrument’s mass contributes to steady handling — lightweight enough for single‑handed work yet substantial enough to dampen vibration during measuring. This robust build translates into lower replacement frequency and fewer production interruptions. Precision aligned with recognised standards Compliance with DIN 862 characterises the M201.393 as suitable for workshop quality control rather than laboratory certification. The 0.05 mm vernier resolution corresponds to standard mechanical accuracy classes and is adequate for routine dimensional checks on machined parts, fixtures and assemblies. The analogue format keeps the measuring principle simple and serviceable: wear can be assessed visually and adjustment made in situ, which preserves long‑term reliability in a busy production environment. Clear, practical features for faster workflows The matt‑chrome scale and the clearly graduated vernier reduce interpretation time and support faster decisions on the shop floor. The balanced jaw geometry and robust slide enable steady contact pressure for consistent readings; this is important where repeatability matters more than submicron resolution. The caliper’s workshop focus makes it a straightforward choice when a dependable, easy‑to‑maintain measuring tool is required for daily inspection and fitting tasks. Secure reliable measurements with Metav IndustryLine’s stainless‑steel M201.393 — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M201.393 GTIN: 4054469102122 Label: Werkstatt-Messschieber mit Spitze 200x60x0,05mm rostfrei Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.05 mm Inch resolution: 1/128 in Weight: 0.8 kg Jaw length: 60/40 mm Special features Material: stainless steel Scale and vernier: matt chrome‑plated Analogue vernier caliper Conforms to DIN 862 FAQ What measuring range does this caliper cover? The M201.393 covers a measuring range of 0–200 mm, making it suitable for standard workshop tasks and routine dimensional checks. What is the smallest graduation and typical accuracy of this analogue caliper? The vernier provides a 0.05 mm graduation; this class of mechanical caliper is intended for workshop accuracy consistent with DIN 862. Is the instrument suitable for corrosive environments? The M201.393 is made from stainless steel, which increases resistance to corrosion compared with plain carbon steel and is appropriate for typical workshop atmospheres. Can the caliper measure internal and external diameters? Yes, the design of the jaws allows both external and internal measurements; the 60/40 jaw geometry also facilitates measurements in confined spaces. Does this caliper include a certification or calibration report? This listing does not indicate an ISO 17025 calibration certificate; the M201.393 is supplied as a workshop instrument conforming to DIN 862. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Internal Groove Caliper 0.05mm Vernier Matt Chrome Inox Kasten - Metav IndustryLine
Taking advantage of a compact 30–250 mm measuring range and a precise 0.05 mm vernier scale, this analogue inside‑groove caliper delivers reliable measurements for everyday workshop and production use; order directly via Metav Werkzeuge or consult our specialists for application advice. Inside‑Groove Vernier Caliper M201.137 — 30–250 mm range, 0.05 mm vernier The Inside‑Groove Vernier Caliper M201.137 is an analogue precision caliper designed to measure internal grooves and narrow slots in metalworking, toolmaking and assembly tasks. 30–250 mm measuring range 0.05 mm vernier resolution Matt chrome, INOX stainless finish Locking screw for secure readings Dependable precision for routine inspection tasks The Inside‑Groove Vernier Caliper M201.137 combines a practical measuring span with a fine vernier scale for clear, reproducible readings. The 30–250 mm span places the tool in the standard caliper class, offering the best balance between reach and rigidity for general mechanical and metalworking tasks. The vernier 0.05 mm graduation provides workshop‑grade resolution while the stated accuracy 0.15 mm reflects the instrument’s role as a robust checking tool rather than a metrology‑lab instrument. As an analogue vernier, it requires no power source and is immediately ready at the bench, which minimises downtime in routine quality checks and set‑up inspections. Robust materials and ergonomic handling for repeatable results Constructed from INOX (stainless steel) with a matt chrome finish, the frame and jaws resist corrosion and retain a consistent slide action under regular shop conditions. The caliper is fitted with an integral locking screw to secure the slider during measurement transfer and to reduce reading error caused by transient movement. The measuring jaws feature an 80 mm effective length suited to reach into groove profiles while remaining stiff enough to avoid twist under normal hand pressure. These material and design choices support repeatable measurements and a long service life in production environments. Practical application in production and workshop workflows This inside‑groove caliper is particularly useful for checking groove widths, seat depths and narrow slot dimensions during assembly, small‑batch machining and first‑article inspections. Its analogue nature makes it straightforward to interpret on the shop floor: the 0.05 mm scale allows quick conformity checks and the simple construction reduces the need for frequent recalibration. The tool integrates well with standard quality control routines where rapid verification and clear pass/fail decisions speed up throughput. For traceable metrology requirements, the caliper serves as a robust reference instrument within a broader inspection process. For purchase guidance or application support for the Metav IndustryLine inside‑groove caliper, please contact Metav Werkzeuge for tailored advice and delivery from Emmerich. Technical data SKU: M201.137 GTIN: 4054469100685 Eclass: 21170344 Tariff number: 90173000 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 30–250 mm Resolution (vernier): 0.05 mm Accuracy: 0.15 mm Jaw length: 80 mm Materials / Special features Material: INOX (stainless steel) Finish: matt chrome Type: Analogue vernier caliper (inside‑groove) Locking screw fitted FAQ How is the measuring range classified for this caliper? The inside‑groove caliper has a 30–250 mm range, classifying it as a standard workshop caliper suitable for general machine‑shop and metalworking tasks. What reading resolution and practical accuracy can be expected? The instrument provides a 0.05 mm vernier resolution; the specified operational accuracy is 0.15 mm, consistent with robust shop‑floor use. Is the caliper suitable for corrosive environments? The caliper is made of INOX (stainless steel) with a matt chrome finish, which improves resistance to corrosion under normal workshop conditions. Can this caliper measure narrow internal grooves effectively? Yes. The jaw geometry and 80 mm effective jaw length are designed to access and assess internal grooves and narrow slots reliably. Who manufactures the product and what is the SKU? The product is offered under Metav IndustryLine; the SKU is M201.137 and the GTIN is 4054469100685. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Precision Caliper Workshop Jawless, Fine Adjustment, Hardened Stainless Steel, For External, Internal And Step Measurements, Delivered In Case - Metav IndustryLine
Take advantage of workshop-grade durability and clear vernier accuracy: the combination of a hardened stainless steel body, fine-adjustment thumbwheel and vernier resolution to 0.02 mm keeps routine measurements efficient and reproducible. Order directly via Metav Werkzeuge or consult our specialists for application advice and supply from Emmerich. Workshop precision caliper M201.311 — 250 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) The Workshop precision caliper M201.311 is an analogue 250 mm precision caliper designed for general workshop measurement tasks including outside, inside and step dimensions Fine-adjustment thumbwheel for smooth setting Hardened stainless steel with matt-chromed scale Vernier reading to 0.02 mm for precise measurement Measures outside, inside and step dimensions Precision where range and repeatability matter This caliper belongs to the Standard class with a measuring span of 0–250 mm, offering the everyday reach required in machine and metal workshops. The mechanical vernier provides a reading step equivalent to 0.02 mm, supported by the dual-scale arrangement (1/1000" upper, 1/50 mm lower) so operators familiar with traditional instruments can read metric and imperial cues. The instrument is intended for repeatable dimensional checks on components, fixturing and routine quality control where robust, easy-to-verify readings are preferred over digital dependency. Built for longevity and controlled handling Constructed from hardened stainless steel with a matt-chromed scale, the caliper resists corrosion and keeps graduations legible in daily shop conditions. A monoblock frame reduces play and maintains jaw alignment over time, while the fine adjustment mechanism allows precise approach to the measurement before final reading, reducing risk of overshoot and inconsistent contact force. Together these features deliver a low-maintenance measuring tool that stays serviceable through regular use and rougher handling typical of workshop environments. Practical use and interpretation for everyday tasks The instrument covers the common measuring functions — outside, inside and step measurement — using a single, compact tool that fits comfortably in the toolbox. Reading the vernier is straightforward: align the scales and take the vernier value to the nearest 0.02 mm increment for a reliable mechanical reading. Supplied to factory standard (Werksnorm), the caliper is ready for bench use in production or maintenance; routine care—cleaning, light lubrication and careful storage—keeps accuracy consistent and extends service life. For applications requiring certificate-backed calibration, please query calibration options prior to purchase. For reliable workshop measurement choose the Metav IndustryLine caliper M201.311 — contact Metav Werkzeuge for personalised advice and supply from Emmerich Technical data Article number: M201.311 GTIN: 4054469101316 Category: Precision caliper (Messschieber) Numbers / Facts Measuring range: 0–250 mm Resolution / reading step: 0.02 mm Vernier scales: 1/1000" (upper), 1/50 mm (lower) Jaw length: 80 mm Special features / Versions Material: hardened stainless steel, matt-chromed scale Construction: monoblock frame Measurement functions: outside, inside, step Adjustment: fine-adjustment thumbwheel Display type: analogue vernier Standard: Werksnorm FAQ How fine is the reading on this caliper and how is it presented? The Workshop precision caliper M201.311 offers a vernier resolution of 0.02 mm, displayed on a dual vernier (1/1000" and 1/50 mm) so metric readings to 0.02 mm are straightforward to obtain. Is the caliper suitable for a busy metal workshop environment? Yes, the M201.311 is built from hardened stainless steel with a matt‑chromed scale and a monoblock frame, designed for robust everyday workshop use. Which measurement types can be performed with this tool? The caliper performs outside, inside and step measurements, making it suitable for component checks, fixture setup and routine assembly inspections. Does the instrument come calibrated to an international standard? The caliper is supplied to factory standard (Werksnorm). If an accredited calibration certificate is required, please enquire before purchase to discuss available calibration services. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Precision Scriber Caliper T-Style, 140mm Stop, Hardened Matt Chrome Finish, Analogue 0.05mm - Metav IndustryLine
Take advantage of the combination of hardened special‑steel construction, a 0.05 mm vernier graduation and a fine‑adjustment screw for reliable, repeatable scribing in daily workshop use; order directly via Metav Werkzeuge or consult the team for specification support. Precision scribing caliper M201.141 — 250 mm T‑form with 140 mm stop (Metav IndustryLine) The Precision scribing caliper M201.141 is a T‑form marking caliper designed for workshop and metal‑fabrication environments, combining robust construction with a fine‑adjustment mechanism to produce accurate layout lines and repeatable references. T‑form design for stable marking 0–250 mm measurement range Vernier reading 0.05 mm for industry use Fine‑adjustment screw for reproducible marks Stable marking and industrial accuracy for everyday workshops The T‑form layout and hardened special steel frame provide a rigid platform for marking and scribing, ensuring straight, consistent layout lines across repeated operations. With a measurement range of 0–250 mm, this tool sits in the Standard caliper class — the best compromise between reach and stiffness for general machine‑tool and metalworking tasks. The analogue vernier with 0.05 mm graduation fulfils the common industrial requirement for layout tools, giving a reliable visual reading that aligns with DIN practice for non‑digital calipers. The integrated stop length of 140 mm increases flexibility when marking from an edge or working on assemblies. Fine control and reproducibility for precise layout work A dedicated fine‑adjustment screw allows for micro‑positioning of the sliding jaw, converting careful setting into repeatable results when transferring scribed lines to workpieces or templates. This mechanical control reduces variability from hand pressure and makes the tool particularly suitable when repeatability matters more than absolute digital traceability. The analogue scale and fine screw together support efficient workflows: set, lock and scribe, rather than guessing adjustments. The robust finish — matt‑chrome plating — reduces glare under workshop lighting and protects surfaces from minor corrosion, helping maintain calibration and readable graduations over time. Practical construction and workshop suitability Materials and design focus on durability and everyday practicality: the caliper is manufactured from special steel, hardened and matt‑chromed, which balances wear resistance with manageable weight for single‑hand operation. The T‑form frame resists torsion during marking, and the slide runs smoothly with the fine‑adjustment mechanism engaged. For general machine shops, tool rooms and maintenance departments, this combination of stiffness, clear vernier graduation and mechanical micro‑adjustment streamlines layout tasks and reduces rework resulting from inconsistent scribing. How this caliper supports quality processes As a layout instrument, the device is intended to support process reliability rather than automated data capture; the analogue vernier and precise mechanical control make it ideal where tactile feedback and immediate visual confirmation are required. The measured design improves operator confidence during fixture setting, part inspection and repeat marking operations, contributing to lower scrap rates and more consistent assembly outcomes. For workshops seeking a robust, serviceable marking caliper with proven mechanical features, the Metav IndustryLine variant provides an accessible precision tool backed by localised supply and advisory support. Contact Metav Werkzeuge for specification guidance or to arrange supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M201.141 GTIN: 4054469100715 ECLASS: 21170344 TARIC/HS code: 90173000 Facts Measurement range: 0–250 mm Bridge / stop length: 140 mm Reading / graduation: 0.05 mm Scale type: Analogue vernier Special features Material: Special steel, hardened, matt‑chromed Design: T‑form marking caliper Fine adjustment: Yes (micro‑adjust screw) Category: Standard (range up to 300 mm) Application: Scribing and layout in machine and metalworking environments FAQ What reading and accuracy can be expected from this caliper? The Precision scribing caliper M201.141 features an analogue vernier with a 0.05 mm graduation; this matches typical industrial layout practice and supports repeatable layout to workshop tolerances. Is the T‑form design advantageous for marking larger components? Yes, the T‑form construction increases stiffness and resistance to torsion, so marking and scribing on longer edges or platework is more stable than with slimmer slide calipers. Which materials and finishes are used on the caliper? The caliper is made from special steel, hardened and matt‑chromed, giving wear resistance and reduced glare for clearer readings under workshop lighting. Does the tool include a fine‑adjustment mechanism for reproducible marks? The instrument is equipped with a fine‑adjustment screw, enabling controlled micro‑positioning of the sliding jaw for repeatable scribing and layout tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Hier wird noch anderes html hinkommen um das wir uns später kümmern