messschieber beschriftung
Das hier ist der erste PLatzhalter
150mm Pocket Precision Caliper 0.02mm Resolution Monoblock Stainless Steel, Vernier DIN 862, Kit Included - Metav IndustryLine
Compact, pocket-ready measurement with 0.02 mm graduations and a robust stainless steel monoblock design ensures reliable readings in everyday workshop tasks; the integrated locking screw improves repeatability. Order the caliper directly via Metav Werkzeuge or consult our technical team for further details. Pocket Caliper TOP 150 x 0.02 mm — stainless steel, monoblock design The Pocket Caliper TOP 150 x 0.02 mm is a compact analogue caliper for standard workshop and field measurements, combining a 150 mm measuring range with fine 0.02 mm graduation and a secure locking screw. Pocket-size 150 mm measuring range 0.02 mm graduation for precise readings Stainless steel monoblock construction Locking screw and four measurement functions Precise readings where it matters The 0.02 mm scale together with the analogue vernier meets workshop expectations for fine mechanical measurement and complies with DIN 862. The dual-scale vernier arrangement allows interpolation to readable increments and supports routine quality checks in machining and maintenance. Use the instrument for outside, inside, depth and step measurements — the integrated four measurement functions reduce tool changes and speed up inspection cycles, delivering measurable gains in throughput and error reduction. Robust form for daily use A stainless steel monoblock frame provides rigidity and resistance to wear, keeping measuring faces aligned over long service life. The slim, pocket-size profile and low weight make the instrument easy to carry between workstations while the locking screw secures jaws for repeatable transfer measurements. A thread table on the reverse offers quick reference for common thread sizes, supporting faster set‑ups and fewer interruptions during workshop work. Practical handling and applications Designed as a universal workshop caliper within the standard range (up to 150 mm), this compact instrument is suitable for general engineering, toolroom tasks and maintenance inspections. The analogue layout keeps operation straightforward without power dependence, while the clear scale and stable jaw geometry promote consistent results even in busy production environments. For traceable documentation, record readings and compare against machine data; the caliper’s combination of durability and precise graduation supports efficient quality assurance routines. Choose the Metav IndustryLine Pocket Caliper for dependable everyday precision — contact Metav Werkzeuge in Emmerich for product advice and reliable supply from the European quality hub. Technical Data Article number: M201.073 GTIN: 4054469100456 Brand: Metav IndustryLine Standard: DIN 862 Material: stainless steel (inox) Measuring range: 0–150 mm Resolution: 0.02 mm Facts Weight: 0.2 kg Tariff number: 90173000 Analog vernier scales: top and bottom specified Four measurement modes: outside, inside, depth, step Special features Monoblock construction Matte chrome finish Locking screw included Thread table on reverse side Pocket-size format FAQ What accuracy can be expected from this pocket caliper? The Pocket Caliper TOP 150 x 0.02 mm provides a 0.02 mm graduation and is built to meet DIN 862 standards for analogue calipers, suitable for standard workshop precision tasks. Which measurement types are possible with this caliper? The instrument supports outside, inside, depth and step measurements — the four measurement functions make it versatile for common inspection and set-up activities. Is the caliper robust enough for everyday workshop use? Yes; the stainless steel monoblock design and locking screw ensure durability and repeatable clamping for routine handling and transport. Does the caliper include quick reference information for threads? A thread table on the reverse is provided for rapid reference of common thread sizes, aiding quicker set-ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper 0.02mm Resolution, Monoblock Stainless Matt Chrome, Moment Lock, Depth Rod, DIN 862, Three-Point, Supplied In Case - Metav IndustryLine
Take advantage of reliable workshop measurement with a compact, hardened stainless‑steel design and a 0.02 mm vernier resolution for consistent results; the built‑in moment lock ensures repeatable settings and the instrument is supplied in a transport case for secure handling. Order the pocket caliper directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine TOP pocket caliper 150 x 0.02 mm — analogue pocket caliper with moment lock The Metav IndustryLine TOP pocket caliper is an analogue measuring instrument designed for universal workshop use, combining a 150 mm range with a fine 0.02 mm vernier for accurate everyday checks. 150 mm measuring range 0.02 mm vernier resolution Moment lock for repeatable setting Four measurement functions (4‑in‑1) Accurate control for process reliability The analogue construction conforms to DIN 862, providing a familiar, robust measuring principle for quality checks and machine setup. With a vernier resolution of 0.02 mm, the instrument supports precise comparative measurements and inspection tasks where small differences matter. The analogue scale and vernier offer immediate visual feedback without reliance on batteries or electronics, which simplifies traceability in routine controls and reduces downtime associated with power issues. Pocket‑sized durability for daily handling Designed as a pocket caliper with a 150 mm range, the instrument represents the Standard class for workshop metrology, balancing reach with stiffness and one‑hand operation. The body is made from stainless steel with a matt chrome finish and is fully hardened in a monoblock design, which increases resistance to wear and bending. These materials and the compact layout make it suitable for transport around the shop and for use in confined workstations, while the supplied transport case protects the device during storage and transfer. Four practical measuring functions in one tool The caliper supports four measurement functions — outside, inside, depth and step measurements — enabling multiple inspection tasks without changing instruments. A dedicated depth gauge and stepped jaw geometry are integrated to perform depth and shoulder checks efficiently. The analogue vernier layout is optimized for quick readings, making this tool a versatile choice for assembly, maintenance and general quality control where a single, lightweight instrument must cover diverse measuring needs. Repeatable setting and workshop ergonomics A mechanical moment lock allows the sliding jaw to be fixed with a reproducible clamping force, reducing variation from manual tightening and improving repeatability across repeated measurements. The monoblock hardened frame minimises flex, while practical details such as a thread table on the reverse side support day‑to‑day work. The overall configuration is focused on long‑term reliability and simplicity: serviceable, robust and suited to the pace of professional workshops. Choose the Metav IndustryLine TOP pocket caliper for dependable, repeatable measurement; contact Metav Werkzeuge in Emmerich for expert procurement and advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.074 GTIN: 4054469100463 Standard: DIN 862 Facts Measuring range: 0–150 mm Resolution: 0.02 mm Vernier: 1/1000" (top) & 1/50–49 mm (bottom) Tariff code: 90173000 Jaw length: 40/17 mm Measurement functions: inside, outside, depth, step Special features Material: stainless steel, matt chrome, fully hardened, monoblock Moment lock for reproducible clamping Analogue (nonius) operation Four‑fold measurement capability Thread table on the reverse side Delivered in a transport case for secure handling Label: TOP FAQ What measurement functions does this caliper offer? The Metav IndustryLine TOP pocket caliper provides four measurement modes: outside, inside, depth and step measurement, enabling versatile workshop inspection. Is the instrument suitable for routine workshop checks? Yes, the analogue layout, 150 mm range and 0.02 mm resolution make the caliper well suited for everyday quality control and machine setup tasks in a workshop environment. What material and finish does the caliper have? The caliper is manufactured from stainless steel with a matt chrome finish and is fully hardened in a monoblock design for enhanced wear resistance. How is repeatability ensured during measurements? Repeatable settings are achieved via the mechanical moment lock, which fixes the sliding jaw with a consistent clamping force for repeat measurements. Does the caliper comply with recognised standards? The device is produced to meet DIN 862 requirements for vernier calipers, reflecting established workshop measurement standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper 0.02mm Resolution, Stainless Tool Steel, Pocket Size, Four-Function Measurement, Supplied In Case - Metav IndustryLine
Compact, robust and easy to carry: the pocket caliper delivers reliable mechanical precision with a 150 mm measuring range and a 0.02 mm vernier resolution, together with a locking screw for reproducible readings. Order the tool directly via Metav Werkzeuge or contact the consultants for application advice. Metav IndustryLine Pocket Caliper M201.015 – 150 mm, 0.02 mm vernier The Metav IndustryLine Pocket Caliper M201.015 is a compact, analogue measuring tool for quick outside, inside, depth and step measurements in workshop and inspection environments Compact 150 mm measuring range 0.02 mm vernier resolution Hardened tool steel, matt chrome-plated Four measurement functions + locking screw Precision where compact size matters A pocket-sized analogue caliper that combines a 150 mm measuring range with a vernier resolution of 0.02 mm, the instrument is classified in the standard range for machine‑shop and metalworking tasks. The mechanical vernier enables fine interpolation of readings without electronics, which benefits environments where battery‑free reliability is required. The tool’s factory standard (Werksnorm) finishing and the clear vernier layout reduce reading errors and support repeatable checks, making the instrument suitable for routine quality control and on‑bench verifications. Practical handling for everyday measuring jobs The compact design puts the emphasis on usability: short jaws and a slim beam allow single‑hand operation and access to confined spaces typical in maintenance, assembly and small‑batch production. The caliper offers four measurement functions—outside, inside, depth and step—together with a locking screw that secures the slider for transfer measurements. An integrated thread table on the reverse face provides immediate reference for common fittings, saving time in the workshop and reducing the need to consult external charts during routine checks. Built for durability and low maintenance Manufactured from tool steel with a matt chrome‑plated surface, the instrument resists wear and handling in everyday industrial use while remaining straightforward to clean and inspect. The analogue construction avoids electronic failure modes and is inherently serviceable; the absence of batteries simplifies long‑term readiness for fieldwork. Metav’s catalogue positioning means this caliper forms part of a wider quality‑filtered range, giving suppliers and workshops a dependable option for basic to intermediate measurement tasks while maintaining ease of integration into standard inspection procedures. Contact Metav Werkzeuge for expert guidance on whether the Metav IndustryLine pocket caliper M201.015 fits a specific workflow or to request tailored ordering support from our Emmerich team Technical data Article number: M201.015 GTIN: 4054469164151 ECLASS: 21170344 Customs tariff: 90173000 Factory standard: Werksnorm Facts Measuring range: 0–150 mm Resolution: 0.02 mm (vernier) Scale type: Analogue vernier Vernier: 1/1000" (top) and 1/50–49 mm (bottom) Special features Material: tool steel Coating: matt chrome-plated Four measurement functions (outside, inside, depth, step) Locking screw for repeatable readings Thread table on reverse face Pocket caliper design for compact handling FAQ What measurements can be taken with this caliper? The Metav IndustryLine pocket caliper M201.015 supports outside, inside, depth and step measurements, covering typical workshop inspection tasks. How fine is the reading and how is it achieved? Readings reach a 0.02 mm resolution via the mechanical vernier scale; the analogue vernier provides fine interpolation without electronic aids. Is the caliper battery powered or electronic? No, this is an analogue pocket caliper; measurements are taken mechanically, so no batteries or displays are required. Does the instrument come with a calibration certificate? The tool is supplied to factory standard (Werksnorm). An ISO 17025 calibration certificate is not included with this model. Is the caliper suitable for workshop use and frequent handling? Yes, the caliper’s tool steel construction and matt chrome‑plated finish are designed for regular workshop handling and routine inspection duties. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper 0.05mm Nonius, Moment Lock, Matte Chrome Case, Four-Function Measurement - Metav IndustryLine
Take advantage of a compact, workshop-ready measuring tool that combines precise vernier reading with a secure moment lock and a transport case for safe storage; the result is efficient, repeatable measurements in a standard machine‑shop environment. Order the pocket caliper directly via Metav Werkzeuge or ask our consultants if needed. Pocket caliper M201.006 — analogue 0–150 mm, 0.05 mm vernier Pocket caliper M201.006 is a compact, analogue vernier caliper for general workshop and metalworking tasks, offering a 0–150 mm range and a matt‑chrome finish for everyday robustness Pocket format 0–150 mm range Vernier resolution 0.05 mm Tool steel construction, matt chrome finish Moment lock for repeatable clamping Four‑way measurement capability Built for reliable workshop performance The compact design places this instrument in the standard workshop range, offering the best balance of reach and rigidity for everyday machining and metalwork. With a measuring range of 0–150 mm and a vernier resolution of 0.05 mm, the caliper supports routine checks, setup and quality‑control tasks where dependable, straightforward measurement is required. The analogue scale and dual vernier markings allow reading in both metric and imperial increments, simplifying data cross‑checks in mixed‑unit environments. Versatile measurement modes for practical tasks Equipped for four‑way measurement — outside, inside, depth and step — the instrument covers common measuring needs without extra tools. The dual vernier arrangement provides both an imperial vernier and a metric reading, easing conversions and reducing measurement steps on the shop floor. The included thread table on the reverse side adds convenience when assessing screw threads, saving time during assembly checks and maintenance procedures. Robust construction and secure handling Made from tool steel with a matt‑chrome finish, the caliper resists grime and light corrosion while remaining easy to clean. The moment lock mechanism guarantees consistent clamping force, so readings remain stable during transfer between workstations. Short and long jaws (40/17 mm) are optimised for accessibility in small features and for stable contact on larger components, helping to reduce measurement error caused by flexing or uneven pressure. Practical delivery and standards for everyday use Delivery includes a protective transport case to prevent damage during storage and transit, and the instrument is produced to factory standard (Werksnorm) for consistent build quality. The analogue vernier format requires no batteries and offers a tactile, low‑maintenance solution that integrates readily into workshop routines. As a pocket caliper intended for regular shop use, it is an economical way to bring reliable vernier precision into daily measurement tasks. For dependable, compact measurement choose the Metav IndustryLine pocket caliper M201.006 — contact Metav Werkzeuge in Emmerich for product advice or to arrange supply close to your workshop. Technical data Article number: M201.006 GTIN: 4054469100081 HS code: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.05 mm Jaw length: 40/17 mm Analogue vernier scales: metric and imperial Special features Material: tool steel Finish: matt chrome Moment lock for repeatable clamping Four‑way measurement (outside, inside, depth, step) Thread table on reverse side Delivery in transport case Factory standard: Werksnorm FAQ Is this caliper suitable for daily shop use? The Pocket caliper M201.006 from Metav IndustryLine is designed for everyday workshop tasks, offering a robust tool‑steel construction and a matt‑chrome finish that withstand routine handling. What measurement modes are available with this caliper? The instrument provides four‑way measurement: outside, inside, depth and step; the caliper also includes vernier scales for metric and imperial readings. How precise is the vernier reading? The analogue vernier on this pocket caliper gives a 0.05 mm reading step, suitable for standard machine‑shop inspections and assembly controls. Does the caliper come with a case? Yes, delivery includes a transport case to protect the caliper during storage and shipment. Are there any convenience aids on the caliper? A thread table is printed on the reverse side for quick reference when checking screws and threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper 0.05mm Resolution Round Depth Rod, Moment Locking, Matt Chrome Finish, Four-Function Measurement - Metav IndustryLine
Compact precision for everyday workshop control: the 0–150 mm measuring range, 0.05 mm vernier resolution and a rounded 2.0 mm depth gauge deliver reliable, repeatable checks; order the caliper directly via Metav Werkzeuge or consult our specialists if needed. Pocket caliper M201.011 — 0–150 mm vernier, stainless steel, Metav IndustryLine The Pocket caliper M201.011 is a compact vernier caliper designed for quick external, internal, step and depth checks on small to medium components in workshop and service environments. 0–150 mm measurement range 0.05 mm vernier resolution Stainless steel construction Four measurement functions (inside/outside/step/depth) Compact, workshop-ready precision for routine quality control This pocket-sized vernier offers a 0–150 mm measuring range that places it in the standard caliper class, ideal for machine shops and metalworking tasks where reach and stiffness must be balanced. The mechanical vernier with 0.05 mm graduation gives straightforward, traceable readings conforming to DIN 862, supporting routine dimensional checks without digital dependencies. The compact format, combined with a matt-finish stainless construction, makes it suitable for mobile use in service rounds and assembly stations while maintaining the robustness expected on the shopfloor. Clear measuring modes and ergonomic handling for faster inspections The instrument supports four measurement functions — external, internal, step and depth — via a rounded 2.0 mm depth gauge and appropriately profiled jaws, enabling a single tool to cover common tasks. A moment lock (ratchet stop) ensures consistent measuring pressure and reduces operator variation, which improves repeatability when multiple components are checked. The vernier layout includes both inch and metric indications for flexible reading; a practical thread table on the reverse provides quick reference when working with threaded parts. Built to industrial standards with features that aid daily use Manufactured in stainless steel with a matt-chrome appearance, the caliper resists routine workshop wear and is easy to clean after exposure to oils or chips. The solid jaw geometry and defined jaw lengths (40/17 mm) support stable contact and positioning on small features. As a mechanically simple tool, the vernier caliper is low-maintenance and well suited to environments where a reliable analogue instrument is preferred over electronics, while still meeting the expectations of everyday quality control. Specify Metav IndustryLine’s pocket caliper M201.011 for dependable shop checks and contact Metav Werkzeuge for tailored advice or bulk-supply options from Emmerich. Technical data Article number: M201.011 GTIN: 4054469100111 Type: Analog vernier caliper Standard: DIN 862 Material: Stainless steel (inox) Facts Measuring range: 0–150 mm Resolution: 0.05 mm Jaw length: 40/17 mm Depth gauge: 2.0 mm Vernier scales: 1/128" (top), 1/20–39 mm (bottom) Special features Four measurement functions: external / internal / step / depth Moment lock (ratchet stop) for reproducible measuring force Thread reference table on the reverse Matt-chrome appearance suitable for workshop use FAQ Is this caliper suitable for everyday workshop measurements? Yes. The Metav IndustryLine pocket caliper M201.011 is built to DIN 862 and the 0–150 mm range places it in the standard category for routine machine‑shop and metalwork measurements. How fine is the resolution and what repeatability can be expected? The mechanical vernier provides a 0.05 mm graduation. Combined with the moment lock, the caliper delivers consistent repeatability for typical shop inspection tasks. What measurement functions does the caliper provide? The instrument performs four measurement modes — external, internal, step and depth measurements — and includes a rounded depth gauge of 2.0 mm for reliable depth checks. Is the caliper suitable for use with both metric and imperial dimensions? Yes. The vernier layout includes metric graduations and an inch-related vernier (1/128"), enabling reading in both systems where required. What are the construction and finish of the caliper? The caliper is made from stainless steel (inox) with a matt-chrome appearance, designed for robust daily use and easy maintenance in workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper 0.05mm Resolution With Round Depth Rod, Matt Chrome, Four-Function Measurement - Metav IndustryLine
Compact, matt‑chrome pocket caliper that pairs a 150 mm measuring range with 0.05 mm vernier accuracy and an integrated round depth gauge for versatile workshop and field measurement. Benefit from a locking screw and dual vernier readout for reliable repeatability — order the pocket caliper directly via Metav Werkzeuge or consult our advisers for tailored selection. Pocket Caliper M201.012 — Analogue Pocket Caliper, 150 mm, 0.05 mm (Metav IndustryLine) Pocket Caliper M201.012 is a compact analogue caliper designed for everyday workshop use and mobile measurements with a round 2.0 mm depth gauge and matt chrome finish. Pocket caliper 150 mm range, 0.05 mm scale Matt chrome finish for reduced reflections Integrated locking screw and round depth gauge Reliable precision where space is limited The analogue vernier caliper offers a 150 mm measuring range combined with a readable 0.05 mm scale, making it a practical standard for machine‑shop and metalworking tasks. Classified in the Standard measuring‑range category, this instrument balances reach and stiffness for common workshop duties such as checking shafts, fixtures and small assemblies. Compliance with DIN 862 ensures familiar tolerances and reading conventions for technicians accustomed to industry norms. The stainless construction and matt chrome plating reduce glare and support consistent performance under regular use. Practical functions that speed up routine checks Equipped with a locking screw and a round 2.0 mm depth gauge, the pocket caliper enables four measuring functions: outside, inside, depth and step measurements. The dual vernier layout facilitates precise analogue reading and a thread‑pitch table on the reverse side speeds up measurement tasks involving fasteners. These features translate into fewer tool changes and faster inspection loops, improving process efficiency without depending on electronics. The combination of robust mechanical reading and practical extras supports dependable results in the production area. Designed for mobility and everyday handling As a true pocket model, the instrument presents compact jaws and a slim profile for convenient storage and transport. The matt chrome finish protects surfaces while keeping reflections low during measurements under workshop lighting. A clear, mechanical scale removes potential uptime issues linked to batteries or electronic failure, favouring a predictable inspection routine. For fine mechanical or fieldwork where lightweight, dependable equipment is required, this caliper provides straightforward, low‑maintenance operation. Materials, usability and workshop integration Made from stainless steel, the caliper resists corrosion and stands up to regular handling. The vernier system and locking screw support repeatable clamping and measurement, while the compact dimensions suit benchwork, service rounds and quality checkpoints. The tool is particularly suitable where analogue readout and mechanical robustness are preferred over digital options, offering an economical route to consistent dimensional control in small to medium‑sized production runs. For precision that fits the pocket, choose the Metav IndustryLine pocket caliper and contact Metav Werkzeuge for procurement or technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.012 GTIN: 4054469100128 eClass: 21170344 Standard: DIN 862 Measuring range: 0–150 mm Resolution: 0.05 mm Material: stainless steel Finish: matt chrome Vernier: dual vernier (top 1/128", bottom 1/20–39 mm) Depth gauge: round, 2.0 mm Locking screw: yes Four measuring functions: outside, inside, depth, step Analog instrument: yes Thread pitch table on reverse side: yes Facts Category: Pocket/standard caliper Intended use: workshop measurement and mobile inspection Compliance: DIN 862 Special features Matt chrome plating for low reflection Stainless steel construction Dual vernier for analogue precision Compact pocket form factor FAQ What measuring functions does the pocket caliper support? The pocket caliper M201.012 provides four measuring functions: outside, inside, depth and step measurement, enabled by its jaw geometry and round depth gauge. Is the instrument compliant with industry standards? Yes, this caliper is manufactured to DIN 862 conventions for analogue vernier calipers, ensuring recognised tolerances and reading methods. What material and finish are used on the caliper? The caliper is made from stainless steel with a matt chrome finish to reduce reflections and improve durability in workshop environments. Does the reverse side include useful reference information? A thread‑pitch table is printed on the reverse side to assist with fastener checks and speed up common inspection tasks. Is a locking screw provided for repeatable measurements? A locking screw is integrated to secure the slider for repeatable clamping and measurement operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper 0.05mm Resolution, Analog Vernier, Moment Lock, Stainless Steel, Depth Rod, Supplied in Case - Metav IndustryLine
Compact precision and robust construction combine to deliver dependable shop‑floor measurements: the compact design, 0.05 mm vernier resolution and moment lock ensure repeatable results and fast hand measurements. Order the caliper directly from Metav Werkzeuge or consult our specialists for application advice. TOP 150 pocket caliper — analogue 0.05 mm, moment lock (Metav IndustryLine) TOP 150 pocket caliper is a compact analogue caliper for general workshop measurement and inspection over a 0–150 mm range Pocket caliper »TOP 150 mm« analogue 0.05 mm Moment lock for fixed measurements Matt‑chromed stainless steel monoblock design Four measuring functions: external, internal, depth, step Precision where reach and handling matter The TOP 150 pocket caliper sits in the Standard class (100–300 mm), offering the best balance of reach and stiffness for everyday workshop tasks. With a vernier resolution of 0.05 mm and conformity to DIN 862, the instrument provides clear, measurable accuracy for routine quality checks and component set‑ups. The analogue vernier gives a tactile, tool‑centric feel that many machinists prefer for quick checks and comparative measurements, while the dual scale supports both metric and inch readings for flexible use across drawings and legacy parts. Robust design built for regular use Constructed from stainless steel with a matt‑chrome finish and a fully hardened monoblock beam, this caliper is designed to withstand regular handling in production environments. The monoblock construction reduces play between the slider and beam, improving long‑term repeatability. Corrosion resistance from the finish helps maintain readable graduations and smooth slide action, and a protective transport case is supplied to keep the tool secure during storage and transit. Practical functions for dependable measurement A mechanical moment lock secures the slider at the set position to prevent accidental movement and to support consistent comparative checks. The instrument offers four measuring functions — external, internal, depth and step — enabling versatile inspection tasks without changing tools. The analogue dual vernier scales provide quick metric and imperial interpretation, and an integrated depth rod completes the feature set for simple depth gauges and steps, keeping measurement workflows efficient and direct. Who benefits from this caliper and why it pays off Workshop technicians, maintenance teams and toolroom staff will value the quick handling, compact size and the repeatability that comes from the moment lock and hardened beam. The caliper is especially suited to everyday dimensional control, fixture set‑up and component inspection where a robust, low‑maintenance instrument is required. As part of the Metav IndustryLine, the tool reflects Metav’s approach to democratising precision: reliable instruments, broad availability and direct access from a central European stock point. Contact Metav Werkzeuge for tailored advice and ensure the TOP 150 pocket caliper (SKU M201.072) meets your workshop requirements Technical Data Article number: M201.072 SKU: M201.072 GTIN: 4054469100449 eClass: 21170344 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.05 mm (analogue vernier) Standard: DIN 862 Jaw lengths: 40 mm / 17 mm Measurement functions: external, internal, depth, step Depth measurement: yes Thread pitch table on reverse side: yes Special features Material: matt‑chromed stainless steel, fully hardened Monoblock beam design Mechanical moment lock for fixed measurements Dual vernier scales for inch and metric readings Fourfold measurement capability for versatile inspection Delivered with protective case for transport and storage Classification: Standard caliper (100–300 mm range) FAQ What level of accuracy can be expected from this pocket caliper? The TOP 150 pocket caliper (Metav IndustryLine, SKU M201.072) provides a vernier resolution of 0.05 mm and complies with DIN 862, delivering repeatable results suitable for standard workshop control. Which measurement types are possible with this caliper? External and internal measurements, depth gauging and step measurement are all supported by the four measuring functions of this analogue caliper. Is the caliper suitable for use in humid or greasy workshop conditions? Yes, the matt‑chromed stainless steel construction and hardened beam improve corrosion resistance and wear behaviour for general workshop environments. Does the caliper include a case and a reference table? A protective case is supplied for transport and storage, and a thread pitch/reference table is printed on the reverse side of the instrument. For which applications is this pocket caliper particularly recommended? The instrument is recommended for routine inspection, fixture set‑up and maintenance tasks in machining and metalwork where a compact, robust caliper with a moment lock is advantageous. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper 0.05mm Resolution, Monoblock Stainless Steel, Four-Point Measurement, Locking Screw, DIN 862 - Metav IndustryLine
Take advantage of a compact, workshop-ready caliper that combines portable design, reliable stainless-steel construction and clear 0.05 mm vernier precision for consistent daily measurement tasks. Order the instrument directly via Metav Werkzeuge or consult our advisors for specific application advice. Pocket Caliper TOP 150 — Pocket caliper, 150 mm range, 0.05 mm vernier (Metav IndustryLine) Pocket Caliper TOP 150 is a compact, analogue measuring instrument designed for quick checks and routine precision work in metalworking and general workshop environments. Compact 150 mm pocket caliper Analog vernier, 0.05 mm resolution Stainless steel monoblock construction Four measurement functions and lock Accurate workshop measurement with industrial standard precision The Pocket Caliper TOP 150 offers a 150 mm measuring range with a vernier resolution of 0.05 mm, placing it firmly in the workshop "Standard" class for everyday mechanical and metalworking tasks. The analogue vernier follows DIN 862 tolerances and provides repeatable readings suitable for routine inspection and setup operations. This performance translates into fewer rechecks, faster throughput and predictable quality control in a busy production or maintenance environment. Robust, corrosion-resistant design for portable use Constructed from stainless steel (INOX) and delivered as a monoblock unit, the instrument resists wear and retains alignment under everyday handling. A matt chrome finish reduces glare while keeping surfaces durable, and the low weight (approx. 0.2 kg) makes the caliper genuinely portable for on-the-move measurement. A thumb-operated locking screw secures jaws for transfer measurements, while a thread pitch chart on the reverse face aids quick reference without interrupting work flow. Four measurement functions explained for practical versatility Equipped for four measurement functions, the caliper covers outside and inside diameters, depth and step measurements in a single tool, reducing the need to change instruments during a job. Dual vernier scales provide both inch and metric reference (upper 1/128" and lower 1/20–39 mm), allowing compatibility with different drawing standards. The analogue design keeps the tool simple and service-friendly while ensuring the essential measurements are available at a glance. Request a suitability check from Metav Werkzeuge for precise workshop integration or ask about complementary metrology tools from the Metav IndustryLine range Technical data SKU: M201.071 GTIN: 4054469100432 EClass: 21170344 TARIC (commodity) code: 90173000 Facts Measuring range: 0–150 mm Maximum range: 150 mm Resolution: 0.05 mm Weight: 0.2 kg Standard: DIN 862 Special features Material: stainless steel (INOX) Monoblock construction Matt chrome plated finish Locking screw for jaw fixation Four measurement functions: outside, inside, depth, step Dual vernier scales: upper 1/128" / lower 1/20–39 mm Thread table printed on reverse Analog/vernier instrument FAQ What is the measuring range and resolution of this caliper? The pocket caliper has a measuring range of 0–150 mm and a vernier resolution of 0.05 mm, which is suitable for standard workshop measurements with reliable repeatability. Which measurements can be performed with this instrument? The instrument supports four measurement functions: outside diameters, inside diameters, depth measurements and step measurements, all available with the single compact unit. What material is the caliper made from and how durable is it? Made from stainless steel (INOX) with a matt chrome finish and monoblock construction, the caliper offers good corrosion resistance and mechanical stability for everyday workshop use. Is the scale metric or imperial? Dual vernier scales are provided: an upper 1/128" inch scale and a lower metric vernier (1/20–39 mm), enabling use with both imperial and metric references. Which standard does the caliper comply with? The caliper is manufactured to meet DIN 862 requirements, ensuring conformity with widely recognised workshop measurement standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper 0.05mm, Monoblock Matt Chrome, Moment Lock, Depth Rod, Four-Function - Metav IndustryLine
Take advantage of a compact, workshop-ready caliper that pairs robust stainless-steel construction with a 0.05 mm vernier for clear, repeatable readings; the built-in moment lock secures the jaw position for consistent results across multiple parts. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M201.020 Pocket caliper — 150 mm, 0.05 mm vernier, moment lock (Metav IndustryLine) The M201.020 pocket caliper is an analogue measuring instrument for precise outside, inside, depth and step measurements in standard workshop environments Pocket caliper 150 mm range 0.05 mm vernier resolution Moment lock for repeatable clamping Four-function measurement capability Precision that supports everyday production The compact analogue vernier is designed for routine inspection tasks where clear, unambiguous readings are required. With a measuring range of 0–150 mm and a resolution of 0.05 mm, this instrument meets the demands of general machine and metalworking shops classified as the Standard caliper size; it offers the best balance of reach, rigidity and single‑handed usability. Built and graduated to DIN 862, the device provides a reliable, comparable basis for quality control and workshop setups, helping to reduce rework and downtime. Stable handling and repeatable results A monoblock construction and moment lock ensure that clamping force remains stable during transport and repeated checks, which translates into more reproducible measurements on series parts. The matt chrome finish over stainless steel resists glare and provides long‑term surface protection in everyday shop conditions. A dedicated depth probe extends the caliper’s usefulness to recess and groove checks, while the jaw geometry (40/17 mm) balances accessibility with secure part contact for consistent external measurements. Practical features that speed inspection The instrument offers four measurement functions — external, internal, depth and step — consolidated in a single tool, reducing tool changes at the bench. The vernier layout includes both metric and imperial graduations for cross‑referencing, and a thread/tolerance table on the reverse enhances rapid decision making without reaching for other documentation. As an analogue caliper, it eliminates electronics-related downtime and is immediately ready for use in variable shop conditions. Suited to workshop routines and quality control Engineered for machinists, tool room staff and maintenance teams, the caliper combines simple, robust mechanics with workshop‑grade accuracy. The analogue scale and reliable mechanical lock support fast comparative checks and go/no‑go decisions on the production floor. Its compact format makes it a practical choice for both bench work and field inspections where portability and repeatable clamping matter more than digital readout features. For tailored purchasing advice or to secure stock of the Metav IndustryLine M201.020 pocket caliper, contact Metav Werkzeuge — local supply direct from Emmerich with application support available. Technical data Article number: M201.020 GTIN: 4054469100142 Standard: DIN 862 Facts Measuring range: 0–150 mm Resolution: 0.05 mm Jaw lengths: 40/17 mm Type: Analogue vernier Measurement functions: outside, inside, depth, step Special features Material: stainless steel Finish: matt chrome Construction: monoblock Moment lock for repeatable clamping Thread/tolerance table on reverse FAQ What measuring functions does this caliper provide? The M201.020 offers four measurement modes: external, internal, depth and step, enabling versatile use in workshop inspection tasks. Is this instrument suitable for general machine‑shop work? Yes — as a 0–150 mm standard caliper the M201.020 from Metav IndustryLine is intended for everyday machine and metalwork applications where reach and stiffness are required. How is repeatability ensured when taking several measurements? Repeatable results are supported by the caliper’s moment lock, which secures jaw position, and the monoblock construction that reduces flex and handling variation. What material and finish does the caliper have? The instrument is manufactured from stainless steel with a matt chrome finish to reduce reflections and improve durability in workshop environments. Does the vernier include imperial graduations? Yes; the vernier arrangement provides both metric and imperial graduations for cross‑referencing and flexible use across different specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper Left-Hand 0.05mm Vernier Matt Chrome Monoblock, DIN 862 - Metav IndustryLine
Take advantage of the left-handed layout, 150 mm measuring range and 0.05 mm vernier precision for reliable everyday workshop measurements; the matt‑chrome, stainless steel Monoblock design and locking screw ensure stable results and easy handling. Order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. M201.118 Left‑hand Pocket Caliper — 150 mm / 0.05 mm (Metav IndustryLine) M201.118 is a left‑hand pocket caliper designed for precise, on‑the‑go dimensional checks in the workshop and on the shop floor Left‑handed vernier layout 150 mm range, compact pocket size Vernier reading to 0.05 mm Stainless steel Monoblock, matt chrome finish Compact precision for daily workshop tasks The pocket caliper delivers a 150 mm measuring range while remaining small enough for portable use; classified as a standard length for machine and metal workshops, it balances reach with rigidity. The vernier scale provides a readable 0.05 mm graduation, which corresponds to industrial measuring needs where repeatable accuracy is essential. Compliance with DIN 862 confirms the instrument meets recognised mechanical caliper standards, giving confidence in routine quality checks and set‑up tasks. Left‑handed ergonomics and practical jaw geometry Engineered specifically for left‑hand operation, the caliper’s left‑handed scale layout and compact form factor simplify single‑handed measuring in confined spaces. The jaw geometry (40/17 mm) offers practical access for both external and internal measurements, while the matt‑chrome surface reduces reflective glare for clearer reading. A secure locking screw keeps the slider fixed during transfer measurements, improving repeatability when moving measurements between components or fixtures. Robust build and workshop features that matter Constructed as a Monoblock from stainless steel, the instrument resists workshop wear and maintains calibration longer than plated assemblies. Useful workshop details include a thread pitch chart on the reverse side, supporting fast thread identification without additional tools. The analogue vernier concept requires no batteries and is optimally suited for users who prefer tactile, mechanical measurement tools that remain dependable under varied environmental conditions. Discuss left‑hand measuring requirements with Metav Werkzeuge in Emmerich — our consultants will help determine if the M201.118 pocket caliper fits the application and arrange delivery or further product information Technical Data Article number: M201.118 GTIN: 4054469100586 Tariff number: 90173000 ECLASS: 21170344 Facts Measuring range: 0–150 mm Resolution/vernier: 0.05 mm Jaws (length): 40/17 mm Standard: DIN 862 Special features Left‑handed vernier layout Stainless steel (INOX) Monoblock construction Matt chrome finish Locking screw for slider fixation Analogue (nonius) caliper Thread pitch chart on reverse side FAQ Is this caliper suitable for left‑handed operators? The M201.118 left‑hand pocket caliper is specifically laid out for left‑hand use, with scales and thumb control positioned for comfortable single‑handed measuring. What accuracy can be expected from this analogue caliper? With a 0.05 mm vernier graduation and DIN 862 conformity, the instrument meets the industrial standard for mechanical calipers and is appropriate for workshop quality checks. Does the caliper include any reference charts or markings? Yes, the caliper features a thread pitch chart on the reverse side to aid quick identification of common thread sizes during inspection tasks. What material and finish does the instrument have? The M201.118 is manufactured as a stainless steel Monoblock with a matt‑chrome finish, giving good corrosion resistance and reduced surface glare. Is the caliper suitable for portable use in the workshop or on site? The pocket‑sized design and locking screw make the instrument well suited for portable measuring and transfer measurements in busy workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper Left-Hand 0.05mm Vernier Moment Lock Matt Chrome INOX Monoblock - Metav IndustryLine
Benefit from a compact, left‑hand pocket caliper combining stainless‑steel robustness, DIN‑standard accuracy and a secure moment lock — ideal for everyday machine‑shop measuring. Order directly via Metav Werkzeuge or consult our specialist advisors for application guidance. M201.120 Pocket Caliper for Left‑handers — Metav IndustryLine, 150 mm, 0.05 mm The M201.120 Pocket Caliper for Left‑handers is a matt‑chrome, stainless‑steel monocast instrument designed for precise, one‑hand measurement tasks in busy workshops. Left‑hand configuration for comfortable use Measuring range 0–150 mm, DIN 862 Vernier reading for 0.05 mm resolution Moment lock for stable measurements Precise everyday measuring without compromise The compact design delivers reliable DIN 862 compliance in a form factor tailored to routine workshop tasks. With a measuring range of 0–150 mm, this instrument sits in the Standard class of calipers — the practical choice for most machine‑shop and metalworking operations, offering an optimal balance of reach and stiffness. The mechanical vernier provides a fine reading step of 0.05 mm, which corresponds to the industrial standard for analogue calipers and supports repeatable results for tasks such as shaft, bore and step measurement. The combination of stainless steel construction and a matt chrome finish resists corrosion and reduces reflections during inspection. Designed for left‑handed handling and secure clamping A left‑hand configuration repositions controls and scales for natural operation with the left hand, reducing handling time and minimizing measurement error in frequent, repetitive checks. The integrated moment lock secures the slide at the chosen position, so set values remain stable while transferring measurements or marking components. The monocast frame improves rigidity and alignment over the full jaw length (external jaw 40 mm, internal jaw 17 mm), helping to preserve measurement integrity under everyday workshop loads. These design choices reduce rework time and support faster, more confident inspection routines. Clear numeric layout and workshop usability The dual vernier arrangement — a top vernier of 1/128" and a bottom vernier of 1/20–39 mm — enables accustomed vernier reading for technicians familiar with mixed‑unit documentation. At a nominal weight of 0.20 kg, the instrument is genuinely pocketable yet robust enough for repeated use; compactness supports ease of transport between machines or inspection benches. An included thread‑table on the reverse side provides a practical quick reference for common conversions and thread checks. As an analogue, non‑electronic caliper it requires no batteries, which simplifies maintenance and keeps lifecycle costs predictable. Contact Metav Werkzeuge today for tailored advice on integrating the M201.120 pocket caliper into your workshop, or request a quotation and delivery details from our Emmerich centre Technical Data Article number: M201.120 GTIN: 4054469100593 Type: Pocket caliper (analogue) Standard: DIN 862 Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.05 mm (vernier) Weight: 0.20 kg Jaw length (external/internal): 40 / 17 mm Tariff number: 90173000 Special features Material: stainless steel (INOX) Finish: matt chrome‑plated Construction: monoblock frame Left‑hand configuration Moment lock (slide fixation) Vernier scales: top 1/128", bottom 1/20–39 mm Analogue operation (no batteries) Thread table on reverse side FAQ What is the measuring range and resolution of this caliper? The M201.120 pocket caliper measures from 0 to 150 mm with a vernier resolution of 0.05 mm, meeting DIN 862 requirements for analogue workshop calipers. Is this caliper suitable for left‑handed users? Yes, the instrument is a left‑hand configuration designed so controls and scales are naturally positioned for left‑hand operation, improving ergonomics and speed for left‑handed technicians. Does the caliper require batteries or electronic maintenance? No, this is an analogue, vernier‑type caliper so it operates without batteries and avoids electronic maintenance routines. How does the moment lock improve measurement workflows? The moment lock secures the slide at the set position, ensuring measured values remain fixed while transferring dimensions or marking parts, which reduces handling errors and speeds up repetitive inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Brass Pocket Caliper 0.05mm Resolution Antimagnetic Locking Case - Metav IndustryLine
Take advantage of the combination of compact portability, reliable mechanical precision and antimagnetic construction for consistent shop-floor measurements. Order the caliper directly via Metav Werkzeuge or ask our consultants for application advice. M201.110 — Pocket brass precision caliper, 0–150 mm, 0.05 mm nonius The M201.110 pocket brass caliper is a compact analogue measuring tool for standard workshop checks and mobile inspection tasks. Brass pocket caliper for robust field use Antimagnetic construction for stable readings Nonius resolution 0.05 mm for clear results Locking screw for repeatable measurements Precision that fits in a pocket The pocket caliper delivers clear mechanical readings with a nonius graduation of 0.05 mm, making it suitable for typical machine‑shop and inspection tasks where reliable, repeatable results are required. As an analogue instrument, the scale and sliding jaw combination provide straightforward verification without electronic dependencies, ideal for rapid checks on components, assemblies and tools. Its compact profile and modest mass support frequent handling without compromising measurement clarity. Built for dependable everyday use Manufactured from brass, this caliper resists corrosion and benefits from antimagnetic properties that reduce interference when working near magnetic materials or ferrous components. The integrated locking screw secures measurements for comparison and recording, improving workflow efficiency during sequential checks. With a standard 0–150 mm measuring range, the instrument covers the most common shop tasks while remaining easy to stow in a pocket or inspection pouch. Practical advantages for workshop workflows The combination of compact dimensions, light weight and mechanical simplicity supports routine use by technicians and quality inspectors who require robust, low‑maintenance tools. As an analogue caliper it requires no batteries and offers immediate availability; maintenance is limited to gentle cleaning and occasional lubrication of the slide. Where quick, conservative measurement decisions are needed, this caliper provides a durable and intuitive option that integrates well with existing inspection routines. Choose the Metav IndustryLine brass pocket precision caliper M201.110 for reliable, antimagnetic daily measurements and contact Metav Werkzeuge GmbH in Emmerich for tailored advice and fast dispatch. Technical data SKU: M201.110 GTIN: 4054469100579 ECLASS: 21170344 Customs tariff number: 90173000 Facts Measuring range: 0–150 mm Resolution / graduation: 0.05 mm Type: Analogue (nonius) Weight: 0.2 kg Special features Material: Brass Antimagnetic construction Locking screw for repeatability Pocket design for mobile inspection FAQ What resolution and repeatability can be expected from this caliper? The M201.110 pocket caliper features a 0.05 mm nonius graduation; this analogue specification corresponds to the common workshop standard for mechanical calipers and supports reliable comparative measurements. Is the instrument suitable for use near magnetic workpieces? Yes. The antimagnetic brass construction of the M201.110 reduces magnetic interference, helping to maintain stable readings when measuring ferrous components or in magnetic environments. Does this caliper require batteries or provide data output? No. The caliper is an analogue instrument and operates without batteries; it does not include electronic data output or interfaces. How robust is the pocket caliper for everyday shop use? Designed as a compact inspection tool, the caliper combines a corrosion‑resistant brass body with a secure locking screw to support routine handling and repeated checks in the workshop. How should the caliper be cared for to ensure long service life? Keep the sliding surfaces clean, avoid abrasive cleaners, and apply a light machine oil occasionally to the slide. Store the caliper dry and protected to preserve the brass finish and measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper 0.05mm Vernier Parallax-Free, Locking Screw, Monoblock, Depth Rod, Wooden/Plastic Case - Metav IndustryLine
Take advantage of a compact, workshop-ready design with reliable 0.05 mm vernier accuracy and parallax-free reading for consistent results; order the caliper directly via Metav Werkzeuge or consult the Metav team for specification support. Pocket Caliper M201.105 — 150 mm vernier, parallax-free reading (Metav IndustryLine) The Pocket Caliper M201.105 is an analogue vernier caliper designed for everyday mechanical and metalworking measurements up to 150 mm, combining a compact format with robust construction for portable workshop use 150 mm measuring range, 0.05 mm resolution Parallax-free vernier for reliable readings Four-measurement functions: inside/outside/depth/step Matt chrome finish with locking screw and monoblock Accurate verification where it matters The compact vernier delivers 0.05 mm resolution in accordance with common workshop practice, making it a reliable choice for standard inspections and machining tasks. Built to the DIN 862 guideline, the instrument provides the familiar analog workflow that many technicians prefer: stable mechanical reference, no batteries and a direct tactile feel while measuring. This precision class is ideal for routine quality checks, setup work and quick verifications on the shop floor, offering a clear balance of accuracy and simplicity. Compact robustness for mobile and bench work A stainless steel construction with a matt chrome finish and a single-piece monoblock frame ensures good stiffness and resistance to everyday wear. The small footprint and pocket format make it highly portable, while the integrated locking screw secures the jaws for transport or repeat checks. A dedicated depth gauge is included for grooves and recesses, and a thread chart printed on the reverse provides quick reference for common screw dimensions, reducing the need to search for supplementary data. Reduced reading errors and consistent measurement routine The parallax-free scale reduces misreadings common to low-quality instruments, while the traditional vernier layout gives a dependable tactile reading method. The caliper supports four-measurement functions — outside, inside, depth and step — so a single tool covers several measuring tasks without swapping gauges. The clear layout and robust clamping help to minimise operator influence during measurement, increasing reproducibility across repeated checks in production or maintenance settings. Practical integration into workshop processes The instrument’s features support efficient workflows: quick manual checks on components, simple incoming inspection routines and straightforward setup controls on machines and fixtures. The combination of stainless steel durability, analogue reliability and the compact format makes the caliper suitable for maintenance teams, toolrooms and field service technicians who need dependable, battery-free measurement. The instrument is presented as a practical everyday tool for standard industrial measurement tasks. Choose the Metav IndustryLine pocket caliper for dependable 0.05 mm workshop measurement — contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.105 GTIN: 4054469100524 ECLASS: 21170344 Norm: DIN 862 Key measurements Measuring range: 0–150 mm Resolution: 0.05 mm Scale type: Vernier (analogue) Measurement functions: inside / outside / depth / step Features Material: stainless steel Finish: matt chrome Parallax-free reading Locking screw Monoblock construction Depth gauge included Thread chart on reverse Analogue vernier caliper FAQ What measuring tasks can this caliper perform? The caliper supports outside, inside, depth and step measurements, so the Pocket Caliper M201.105 covers common workshop tasks without additional gauges. Is the scale easy to read and resistant to misreading? Yes, the vernier layout is parallax-free, which helps to prevent reading errors and ensures reproducible results on the M201.105. Which materials suit measurement with this caliper? The stainless steel construction makes the tool durable for use in typical metalworking and mechanical environments; it is intended primarily as a measuring instrument rather than for contact with soft or treated surfaces that could mark. Does the caliper meet recognised standards? The design follows the DIN 862 guideline for vernier calipers, offering an established reference basis for standard measurement tasks. What accessories or printed information are included? A thread chart is printed on the reverse side for quick screw-size reference, and a locking screw secures jaws for repeat measurements or transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper Pocket 0.05mm Vernier, Matt Chrome Tool Steel, Four-Function, Locking Screw, Case - Metav IndustryLine
Take advantage of a compact, 150 mm vernier caliper that combines reliable 0.05 mm readability with durable tool steel construction; order the instrument directly via Metav Werkzeuge or request guidance from our consultants for workshop integration. Pocket Caliper M201.004 — 150 mm Vernier, 0.05 mm Resolution (Metav IndustryLine) A Pocket Caliper M201.004 for fast external, internal, depth and step measurements in general workshop and inspection tasks. 150 mm measuring range 0.05 mm vernier resolution Matt chrome, tool steel construction Locking screw for stable readings Accurate readings for everyday quality control The compact vernier caliper delivers repeatable measurements thanks to its classic analogue scale with a 0.05 mm resolution. As a standard-range instrument (best suited to everyday workshop tasks), it balances reach and stiffness for typical machine‑shop and metalworking checks. The vernier setup includes dual scales for fine reading and supports the familiar technique used across trades, so measurement procedures remain transparent and traceable without reliance on batteries or electronics. Designed for practical workshop use This pocket instrument is made from tool steel with a matt chrome finish that resists glare and hides light marks from daily handling. The integrated locking screw keeps jaws in position for transfer measurements and reduces read-off error during part handling. A compact jaw geometry (40 mm / 17 mm) provides access to narrow recesses while still offering stable contact faces for external and internal checks. The caliper’s analogue design removes dependence on power sources, making it a convenient companion for mobile inspection rounds. Four measuring functions reduce tool count Equipped for external, internal, depth and step measurements, this instrument consolidates multiple measuring tasks into a single tool, improving workflow efficiency and reducing tool changes. The vernier scale provides direct readings for each function; routine tasks such as checking bores, shafts and stepped shoulders can be completed without swapping instruments. A practical thread table printed on the reverse offers quick references for common threads, saving time in day‑to‑day inspection work. Reliable provenance and workshop support Produced to factory standard and supplied under the Metav IndustryLine label, this caliper suits foundries, maintenance shops and general machining environments that require straightforward, no‑frills accuracy. Metav’s position as a precision partner ensures easy access to a broad range of complementary measuring tools, while the product’s robust construction supports long service life with minimal upkeep. Maintenance is limited to keeping contact faces clean and occasional lubrication of the slide to preserve smooth, consistent movement. Contact Metav Werkzeuge for tailored advice on integrating the Pocket Caliper M201.004 into inspection routines; our Emmerich‑based specialists will assist with technical queries and supply options. Technical data Article number: M201.004 GTIN: 4054469100067 Tariff number: 90173000 Factory standard: Werksnorm Numbers / Core technical data Measuring range: 0–150 mm Resolution: 0.05 mm Vernier scales: upper 1/128; lower 1/20–39 mm Jaw length: 40 mm / 17 mm Designs / Special features Material: tool steel Finish: matt chrome Analogue vernier instrument Locking screw for fixing measurements Four measuring functions: external, internal, depth, step Thread table printed on reverse FAQ How precise is the Pocket Caliper M201.004 for routine checks? The Pocket Caliper M201.004 provides a 0.05 mm vernier resolution, making it suitable for standard workshop quality control and general machining inspections. Can this caliper measure both internal and external dimensions? Yes, the instrument supports external, internal, depth and step measurements, consolidating several tasks in one compact tool. What material and finish does the caliper have? The caliper is manufactured from tool steel with a matt chrome finish for enhanced durability and reduced surface glare. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper Pocket Analog 0.05mm Resolution Monoblock Satin Chrome Four-Function, Fixing Screw, DIN 862 - Metav IndustryLine
Take advantage of the pocket-sized robustness and clear Vernier readout for fast, repeatable checks in the workshop. The matt chrome, stainless steel monoblock design combines compact handling with durable measuring faces and a locking screw for consistent zeroing; order directly via Metav Werkzeuge or consult our specialists for application advice. M201.018 Pocket Caliper — 150 mm, matt chrome, stainless steel (Metav IndustryLine) A M201.018 pocket precision caliper for compact, everyday measurement tasks in machine and metalworking environments Pocket-size stainless steel caliper Matt chrome finish for low reflection Locking screw for repeatable measurements Compact design that speeds routine checks The M201.018 combines a compact footprint with a monoblock construction to deliver rigidity in a pocketable instrument. At a 150 mm range this caliper sits in the Standard class of workshop tools, offering the best balance between reach and stiffness for routine checks on components, fixtures and small assemblies. The matt chrome finish reduces glare under workshop lighting, easing read-off accuracy on the analogue scale and helping operators work faster without compromising measurement reliability. Clear Vernier readout and four measurement functions Equipped with a dual Vernier layout (top: 1/128", bottom: 1/20–39 mm), this analogue instrument gives unambiguous visual graduations for fine setting and verification. The design supports four measurement functions — external, internal, depth and step measurements — which reduces tool changes and shortens set-up time. A locking screw secures the slider for repeatable transfers, while a thread table printed on the reverse provides quick reference for common thread tasks. Compliance with DIN 862 standards ensures the scale and form factor meet established workshop tolerances. Suited to workshop use with practical features for machinists Made from stainless steel and finished for reduced surface reflections, the caliper is aimed at machinists, toolmakers and maintenance technicians who need reliable, analogue control without the complexity of electronic readouts. The fixed, robust jaws and the single-piece slider deliver stable measurement contacts, particularly useful when checking small bearings, shafts or turned parts. The built-in thread reference and compact size make this caliper a practical companion at the bench or in portable inspection kits, supporting efficient inspection routines and lowering interruption time during production. Choose the Metav IndustryLine M201.018 for compact, durable measuring where portability and reliable analogue readout matter most — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.018 GTIN: 4054469100135 Brand: Metav IndustryLine Category: Calipers Facts Measuring range: 0–150 mm Resolution: 0.05 mm (Vernier) Nonius / Vernier: 1/128" top; 1/20–39 mm bottom Standard: DIN 862 Instrument type: analogue Four measurement functions: external, internal, depth, step Special features Material: stainless steel Finish: matt chrome Monoblock construction Locking screw for slider fixation Thread table on reverse side FAQ Is this caliper suitable for workshop measurements up to 150 mm? Yes. The M201.018 pocket caliper is specified for a 0–150 mm measuring range and is classified as a Standard caliper suitable for general machine‑ and metalworking tasks. What measurement functions does the caliper provide? The instrument supports four measurement functions: external, internal, depth and step measurements, allowing versatile use without additional gauges. How precise is the Vernier scale on this caliper? The Vernier arrangement gives a reading increment of 0.05 mm; the dual-scale layout (including the imperial 1/128" top scale) aids fine visual interpolation for workshop checks. Does the caliper include a locking mechanism? Yes. A locking screw is fitted to secure the slider and transfer measurements reliably between set‑up and check points. Is the instrument corrosion resistant for workshop environments? The caliper is manufactured from stainless steel and finished in matt chrome to reduce surface reflections and to provide practical resistance suited to general workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper Pocket With Locking Wheel, Matt Chrome, Four-Point Measurement, DIN 862, Inox Kist - Metav IndustryLine
Take advantage of a compact, stainless steel design combined with a reliable vernier to DIN 862 and a locking screw for consistent readings. Benefit from four-way measurement capability for interior, exterior, depth and step checks. Order the caliper directly via Metav Werkzeuge or request advice from our specialist consultants. Pocket Caliper M201.051 — 150 mm analogue vernier, inox matt chrome A Pocket Caliper M201.051 designed for quick, repeatable measurements in workshop, maintenance and inspection tasks Pocket-size 150 mm vernier caliper Stainless steel matt chrome finish Locking screw for repeatable readings Four-way measurement functionality Precise workshop measurements without electronics The vernier scale provides a robust, battery-free measuring system that complies with DIN 862, making it suitable for routine checks and assembly tasks where electronic aids are unnecessary. The analogue reading method is durable and immediately legible after a short familiarisation; the instrument supports four-way measurement for exterior, interior, depth and step readings, which reduces the need for multiple gauges. This characteristic keeps the workflow straightforward and helps maintain production pace while ensuring measurable repeatability. Solid stainless construction for everyday handling Constructed from stainless steel (inox) with a matt chrome finish, the caliper resists corrosion and stands up to workshop conditions. The compact 150 mm format belongs to the Standard size class, offering a practical balance between reach and stiffness for general metalworking and maintenance tasks. A locking screw secures the slider to preserve measurements during transfer or marking, enhancing reliability on the bench or at the machine. The small footprint and pocket-ready form factor support fast, on-the-move inspections. Practical additions that save time on the job Designed with practical use in mind, the instrument includes a thread table on the reverse side for quick reference during thread checks and a clearly graduated metric scale for straightforward interpretation. Being an analogue tool, it requires minimal upkeep: keep the measuring faces clean and free of debris, apply light lubrication to the slide occasionally and store the caliper dry. The mechanical design ensures consistent function without dependence on batteries, which simplifies long-term use and reduces downtime. Contact Metav Werkzeuge for procurement and technical advice on the Metav IndustryLine pocket caliper—request product information or a tailored quote via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.051 GTIN: 4054469100371 eClass: 21170344 Tariff code: 90173000 Facts Measuring range: 0–150 mm Standard: DIN 862 Analogue vernier scale Pocket-size format Special features Material: stainless steel (inox) Finish: matt chrome Locking screw for fixed readings Four-way measurement: exterior, interior, depth, step Thread table on the reverse side FAQ How suitable is this caliper for standard workshop measurements? The Pocket Caliper M201.051 is built to DIN 862 and is intended for standard workshop and maintenance tasks where a robust analogue instrument is preferred. Which measurement tasks can be performed with this instrument? Interior, exterior, depth and step measurements are all supported thanks to the four-way measurement design of the caliper. What material is the caliper made from and how durable is it? The caliper is made from stainless steel (inox) with a matt chrome finish, offering corrosion resistance and mechanical robustness for everyday use. Is calibration included with delivery? Calibration status is not specified for this item; the caliper conforms to DIN 862, and any specific calibration or certification requirements can be discussed with Metav Werkzeuge. How should the caliper be maintained to ensure long service life? Keep the measuring faces clean, avoid shocks, apply light lubrication to the slide when needed and store the instrument dry to preserve accuracy and function. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper With Concealed Rack, 0.02mm Vernier, Four-Function Measurement, Hardened Stainless Steel, Plastic Case - Metav IndustryLine
Combine fully hardened stainless steel construction with a concealed rack and a vernier resolution of 0.02 mm for repeatable, fine‑mechanical measurements; order the caliper directly via Metav Werkzeuge or consult the technical advisors for specification matching. Uhren-Messschieber M202.231 — Watchmaker caliper with concealed rack and 0.02 mm vernier The Uhren-Messschieber is a precision watchmaker caliper engineered for fine mechanical and micro‑assembly measurement tasks, offering a compact Standard range ideal for bench work and small components. Concealed rack, dust-resistant design Vernier accuracy 0.02 mm Four-way measurement functions Hardened stainless steel construction Compliant with DIN 862, incl case Precise measuring performance for micro and bench work Equipped with a mechanical vernier that reads to 0.02 mm, this instrument provides one of the finer analog resolutions available for mechanical calipers, meeting the expectations of watchmaking and precision assembly. The tool supports four-way measurement — external, internal, depth and step — enabling a single gauge to replace multiple items in a small workshop. Conformance with DIN 862 ensures the measuring method and scale layout are consistent with industrial practice, giving a clear technical basis for quality control and traceable comparison. Durable, workshop-ready construction for reproducible results The frame and jaws are manufactured from fully hardened stainless steel, which increases wear resistance and maintains jaw alignment under frequent use. A concealed rack reduces exposure to dust and swarf, extending service life and lowering maintenance needs while preserving measurement reliability. Practical details such as the printed thread chart on the reverse of the scale and the compact jaw lengths (40/30 mm) enhance handling and make repeated measurements less error‑prone in daily workshop routines. The caliper is supplied in a protective transport case to safeguard the instrument during storage and transit. Intuitive handling and clear data for efficient workflow As an analog precision caliper, the instrument combines tactile control with immediate numerical feedback from the vernier scale; this favours operators who prefer direct mechanical reading without electronic dependencies. Classified as a Standard range caliper (0–150 mm), it balances reach and stiffness, making it suitable for both watchmaking and general mechanical workshops that require reliable, repeatable results. For further technical clarification or to confirm fit‑for‑purpose within a metrology routine, the Metav technical team is available to advise on integration and calibration options. For specification matching or a detailed consultation about the Metav IndustryLine watchmaker caliper, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M202.231 GTIN: 4054469102399 Category: Messschieber Standard: DIN 862 Facts Measuring range: 0–150 mm Resolution / reading: 0.02 mm Jaw lengths: 40/30 mm Measuring functions: external, internal, depth, step Reading type: Analog vernier Special features Material: stainless steel, fully hardened Concealed rack for dust resistance Thread chart printed on reverse Supplied in a protective transport case Classified as Standard range caliper for workshop use FAQ What is the measuring range and resolution? The measuring range is 0–150 mm with a vernier reading of 0.02 mm; the Uhren-Messschieber M202.231 is therefore suitable for fine, repeatable measurements within that span. Can this caliper be used for internal and depth measurements? Yes — the instrument offers four measurement functions (external, internal, depth and step), making it versatile for both watchmaker and general bench applications. Is the caliper suitable for dusty workshop environments? The concealed rack design reduces dust ingress and mechanical contamination, improving longevity and maintaining measurement reproducibility under typical workshop conditions. Does the product comply with recognised standards? The caliper is manufactured to the conventions of DIN 862, which governs caliper scale layout and measurement practice. What accessories or documentation are included? Delivery includes the caliper, a protective transport case and a printed thread chart on the reverse of the scale; further calibration documentation is not indicated for this listing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Pocket Caliper 0.02mm Resolution Round Jaws, Depth Rod 2.0mm, Matt Chrome, Four-Function - Metav IndustryLine
Take advantage of a compact, workshop-ready caliper that combines 150 mm measuring range, 0.02 mm resolution and robust matt-chrome stainless construction for reliable everyday checks; order or request advice via Metav Werkzeuge for a tailored supply solution. Pocket Caliper M201.013 (150 mm, 0.02 mm resolution) — Metav IndustryLine A Pocket Caliper M201.013 built for precise, compact measurements in machine shops and field use, featuring a round depth rod and matt-chrome stainless finish. Compact 150 mm measuring range 0.02 mm resolution nonius scale Four-way measurement capability Matt-chrome stainless construction Precision that fits the workshop This compact caliper is classified in the standard measuring range and is optimised for everyday tasks in machine and metal workshops. The mechanical nonius delivers a 0.02 mm reading step, offering a balance between readability and robustness for production checks and quality control. Conforming to DIN 862, the instrument is suitable where a reliable analogue reference is required and where repeatable manual measurements are part of routine inspection procedures. The four measurement modes (external, internal, depth and step) extend utility without adding bulk. Robust, portable design for repeatable checks A matt-chrome finish over stainless steel gives the caliper corrosion resistance and a professional feel while keeping weight and size suitable for pocket carry. The round depth rod (2.0 mm) and jaw geometry with 40/17 mm tip lengths allow access to shallow recesses and narrow grooves. The integrated lock screw secures the slide for transfer measurements, and a thread table on the reverse side supports quick reference for common thread pitches. The mechanical design requires no batteries, which simplifies maintenance and ensures readiness in harsher shop environments. Practical benefits and typical applications Thanks to its compact footprint and four-way measurement capability, the instrument works well for setup tasks, quick in-process checks and small-series inspections where portability and speed are priorities. The analogue scale provides immediate tactile feedback, useful when a steady hand and straightforward interpretation are preferred over electronic systems. Ideal applications include general workshop measuring, toolroom checks, and on-site verification of assembled parts. The combination of a hardened measuring system and matt-chrome corrosion protection supports long service life under normal workshop use. For precise, portable measuring from a trusted supplier, choose the Metav IndustryLine Pocket Caliper M201.013 — contact Metav Werkzeuge for advice or to arrange delivery from Emmerich. Technical Data SKU: M201.013 GTIN: 4054469163963 Eclass: 21170344 Customs tariff number: 90173000 Material: stainless steel (inox) Finish: matt-chrome plated Standard: DIN 862 Numbers / Core technical data Measuring range: 0–150 mm Resolution: 0.02 mm Jaw tip lengths: 40 / 17 mm Depth rod diameter: 2.0 mm Special features / Versions Four-way measurement: external, internal, depth, step Mechanical nonius scale Lock screw for secure measurement transfer Thread table on reverse side Pocket-sized, portable design FAQ How accurate is the caliper for everyday shop work? The Pocket Caliper M201.013 provides a 0.02 mm resolution on an analogue nonius and complies with DIN 862, making it suitable for standard workshop accuracy and routine inspection tasks. Which measurements can be performed with this caliper? The instrument supports four functions: external, internal, depth and step measurements, enabling versatile use across setup, inspection and assembly checks. Does the caliper require batteries or electronics? No. The M201.013 is a fully mechanical caliper with a nonius scale, so it operates without batteries and is ready for immediate use. What material is the caliper made from and how is it protected? The caliper is manufactured from stainless steel with a matt-chrome plated finish to improve corrosion resistance and durability in workshop environments. Is there a quick reference for thread pitches on the tool? Yes. A thread table is printed on the reverse side of the caliper to facilitate rapid identification of common pitches during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Pocket Caliper 0.02mm Resolution, Monoblock Matte Chrome Moment Lock, Four-Point Measuring, Inox, DIN 862 - Metav IndustryLine
Take advantage of a compact, DIN‑compliant measuring tool that combines 0.02 mm vernier resolution with a moment lock for reproducible pressure and consistent readings; order directly via Metav Werkzeuge or contact our consultants for application advice. Pocket Caliper M201.045 — 150 mm, 0.02 mm vernier, matt chrome (Metav IndustryLine) The Pocket Caliper M201.045 is a compact, analogue vernier caliper designed for reliable workshop measurement, offering quick inside, outside, depth and step checks for machining and maintenance tasks. Compact 150 mm measuring range 0.02 mm vernier resolution Moment lock for reproducible contact force Four-way measurement capability Consistent, measurable precision for everyday work The Pocket Caliper M201.045 offers 0.02 mm vernier resolution and is manufactured to DIN 862 standards, providing stable, repeatable results for routine quality checks and setup tasks. The integrated moment lock prevents variation in contact pressure, which reduces operator-induced error and improves batch-to-batch comparability. The analogue vernier layout includes an auxiliary inch scale and a clearly graduated metric scale, making the instrument suitable where straightforward, mechanically robust measurement is required. This combination delivers a measurable improvement in process reliability without added electronic complexity. Compact design that supports efficient handling With a 150 mm range in a pocketable format and a monoblock slide, the instrument stays rigid during single‑hand operation and when measuring awkward positions. The stainless steel body with matt chrome finish resists corrosion and reduces glare in bright workshop lighting, while the concise jaw geometry (40/17 mm) helps to reach into small features. The caliper also provides depth measurement via the integral depth rod, keeping multiple basic measurement functions consolidated in one lightweight tool for fast, practical use at the bench or on site. Built for the workshop: classification and applications Classified in the Standard range (100–300 mm), this caliper suits general machine‑shop and metalwork tasks where a balanced combination of reach and stiffness is essential. Its four‑way measurement capability supports internal, external, depth and step measurements without equipment changes, simplifying inspection routines. A thread reference table on the reverse side assists with common fastener checks, saving time when comparing measured pitches. Robust analogue operation makes the tool particularly appropriate for workshops that prioritise durability and ease of service. Practical delivery, upkeep and serviceability The caliper is supplied in a protective transport case to prevent damage during storage and transit, and the monoblock construction minimises play over time. Routine care is straightforward: keep the slide clean, apply a light corrosion‑inhibiting oil to moving parts, and use the moment lock to avoid undue wear from excessive clamping. The simple mechanical design keeps long‑term maintenance low while ensuring the caliper remains a dependable instrument in daily production and inspection workflows. Metav IndustryLine supports this tool with the supply reliability and quality oversight expected by European workshops. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine Pocket Caliper M201.045 into production or inspection routines; our Emmerich team can recommend suitable measurement procedures and delivery options. Technical data SKU: M201.045 GTIN: 4054469100326 eClass: 21170344 Norm: DIN 862 Core measurements Measuring range: 0–150 mm Maximum measuring range: 150 mm Resolution: 0.02 mm (vernier) Vernier with auxiliary inch scale Four‑way measurement: internal, external, depth, step Depth measurement included Zolltarifnummer: 90173000 Design & special features Material: inox (stainless steel) Finish: matt chrome Monoblock slide construction Moment lock (momentfestellung) Thread table on reverse side Supplied in transport case FAQ What types of measurement can be performed with this caliper? The Pocket Caliper M201.045 performs internal, external, depth and step measurements thanks to its four‑way measurement design, enabling a wide range of workshop checks. Is the instrument compliant with recognised standards? Yes, the caliper is manufactured to DIN 862, ensuring common industrial expectations for mechanical caliper performance are met. Is the caliper delivered ready for safe transport? The caliper is supplied in a protective transport case to prevent damage during storage and transit and to simplify safe handling on the shop floor. Is this caliper intended for precision laboratory work or general workshop use? This instrument is classified in the Standard range (100–300 mm), making it ideal for machine‑shop and metalwork applications where balanced reach and stiffness are required rather than submicron laboratory tasks. Does the caliper include a reference for thread measurements? Yes, a thread table on the reverse side provides quick reference data for common fastener checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Taschen-Messschieber, Momentverstellung, Werksnorm - Metav IndustryLine
Die besonders positiven Bewertungen von Metav Werkzeuge stehen für viele loyale Kunden. Finde es selbst heraus und bestelle bei metav-shop.de! HIGHLIGHTS für 150mm Taschen-Messschieber Messbereich: bis 150mm Material: werkzeugstahl 150mm - Bereich für klare Ergebnisse Mit von 0 – 150mm decken den Bedarf im Tagesgeschäft zuverlässig ab. Flächen, Kanten und Abschnitte lassen sich sicher ansteuern, auch bei wechselnden Geometrien. Der Bereich unterstützt strukturierte Abläufe im Maschinen- und Metallbau und hält Reserven für Sonderfälle bereit. Gleichmäßige Messfolgen bringen Ruhe in die Fertigung. So bleibt Präzision planbar – vom ersten Griff bis zur Freigabe. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Dieses Messwerkzeug vereint gleich vier präzise Messfunktionen in einem einzigen Gerät: Außen-, Innen-, Tiefen- und Stufenmessung. Dank sorgfältig ausgeführter Messflächen und einer integrierten Tiefenmessstange entfällt das Wechseln von Werkzeugen. Im Gegensatz dazu beherrschen viele Standard-Messschieber nur drei Messarten – und die Stufenmessung gelingt nur bei exakt plan bearbeiteten Stirnflächen. Das sind die 4 Mess-Modi: Außenmessung: Außendurchmesser, Breite, Dicke von Werkstücken mit den großen Messschnäbeln Innenmessung: Innendurchmesser von Bohrungen, Nuten, Rohren – gemessen mit den oberen, kleineren Kreuzschnäbeln Tiefenmessung: Tiefe von Sacklöchern, Nuten oder Abständen bis zu einer Grundfläche – mittels ausfahrender Tiefenmessstange am Schieberende Stufen- oder Absatzmessung: Höhe bzw. Versatz zwischen zwei Ebenen (Absatz an Dreh-/Frästeilen, Bundhöhe, Schrittmaß an Gehäusen) – gemessen über die rechtwinklig geschliffenen Stirnseiten von Schiene und Schieber Ausführung Werksnorm Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Metav IndustryLine Taschen-Messschieber erfüllt die Anforderungen der Werksnorm in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Profis für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem erstklassigen Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Benutzung als Einstelllehre Dieser Messschieber ist mit einer Momentverstellung ausgestattet. Im Schieber sitzt eine kleine Friktions-Kupplung, die mit einem definierten Drehmoment arbeitet: Beim Messen gleitet der Schieber weich, hält aber nach dem Loslassen selbstständig in Position. Auf diese Weise lassen sich reproduzierbare Ergebnisse einfach und zügig erreichen. Mit Gewindetabelle auf der Rückseite des Messschiebers Die kleine Gewindetabelle auf der Rückseite vieler Messschieber ist ein Spickzettel für den Gewinde- und Bohrungsalltag: Sie verrät für gängige Schraubengrößen sofort Steigung, Kerndurchmesser (Kerndloch) und den passenden Bohrerdurchmesser. Damit spart man das Blättern in Tabellenbüchern, vermeidet Rechenfehler und hat alle Daten genau dort, wo man sowieso misst. Detailspezifikationen für den Taschen-Messschieber von Metav IndustryLine: Bestellnummer: M201.016 Messbereich: 0-150mm Marke: Metav IndustryLine Bezeichnung: Taschen-Messschieber Ausführung: analog Gewicht: 0,2kg Material: werkzeugstahl Lieferung im Kasten Norm: Werksnorm Schnabellänge: 40/17mm Nonius: 1/1000" Oben und 1/50-49 mm Unten für 4-fach Messung mit Gewindetabelle auf der Rückseite mit Momentverstellung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Erwägungen beim Beschaffen eines Messschiebers: Zusatzfunktionen wie Datenausgangsoptionen oder die Regelung der Messkraft sind neben der Genauigkeit und dem Messbereich essenziell. Messschieber mit spezifizierter Messkraft bietet insbesondere bei Qualitätssicherungsprozessen und in laboratory setups Vorteile. Außerdem sollte man untersuchen, ob ein kalibrierter Messschieber sinnvoll ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug von Metav IndustryLine haben: Taschen-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
160mm Internal Groove Caliper 0.05mm Graduation, Matt Chrome Plated, Stainless Steel, Supplied in Case - Metav IndustryLine
Benefit from precise vernier resolution and robust stainless construction for dependable workshop measurements; combine 0.05 mm reading clarity with a 20–160 mm measuring range to standardise routine checks — order the M201.135 Internal-groove caliper directly via Metav Werkzeuge or consult our advisors if clarification is required. M201.135 Internal-groove caliper — Metav IndustryLine, 20–160 mm, 0.05 mm The M201.135 is an analogue internal-groove caliper designed for standard workshop use, delivering repeatable measurements of grooves and profiles across a 20–160 mm range. Analogue vernier reading 0.05 mm Measuring range 20–160 mm Matt chrome finish, stainless steel Locking screw for repeatable readings 40 mm jaw length for deep grooves Precise vernier measurement that suits everyday production The vernier scale with a 0.05 mm reading gives a clear, mechanical indication of small increments while the stated measurement uncertainty of ±0.1 mm describes the practical tolerance to expect in workshop conditions. Such a combination supports rational decision-making in quality control: the fine resolution enables quick visual checks, while the specified accuracy frames where the caliper is best applied — routine machine-shop inspections rather than submicron laboratory tasks. This makes the instrument a reliable tool for parts acceptance and process checks. Durable stainless construction for regular industrial use Made from stainless steel (INOX) with a matt chrome finish, the instrument resists corrosion and wears evenly under frequent handling. The material choice reduces surface glare and eases reading under bright lights, while the robust build maintains profile geometry over time. A sturdy jaw length of 40 mm reaches into deeper grooves without sacrificing rigidity, which helps maintain measurement repeatability across multiple workpieces and reduces the need for constant rechecking. Geometry and features tailored to internal-groove inspection The caliper’s jaw geometry is optimised for internal groove measurement, allowing accurate engagement with groove bottoms and narrow profiles. The integrated locking screw secures the slider to preserve a measured value for transfer or comparison, improving workflow efficiency when multiple reference checks are required. As an analogue instrument, it also avoids battery dependence and is straightforward to use where electronic readouts are unnecessary. Practical handling, inspection logic and workshop integration With a 20–160 mm measuring range the tool falls into the standard caliper category, offering a balanced compromise between reach and stiffness for typical metalworking tasks. The analogue format is particularly suited to fast, tactile inspection routines on the shop floor where operators value immediate visual feedback. Clear mechanical scales, combined with the locking function and corrosion-resistant finish, reduce downtime for maintenance and support a predictable inspection process. Choose the Metav IndustryLine internal-groove caliper for dependable workshop measurements and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M201.135 GTIN: 4054469100661 ECLASS: 21170344 Customs tariff: 90173000 Numbers / Core technical data Measuring range: 20–160 mm Resolution (reading): 0.05 mm Stated accuracy: ±0.1 mm Jaw length: 40 mm Designs / Special features Material: stainless steel (INOX) Finish: matt chrome Type: analogue caliper (vernier) Application: internal-groove measurement Feature: locking screw for fixed readings FAQ How fine is the smallest readable increment on this caliper? The instrument shows a vernier reading of 0.05 mm, which defines the smallest visible graduation on the scale for the M201.135 internal-groove caliper. What measurement range does this tool cover? This analogue caliper covers 20–160 mm, placing it in the standard class suitable for general machine‑shop and metalworking inspections. Is the caliper suitable for measuring deep or narrow grooves? Yes, the jaw geometry and a 40 mm jaw length are designed to access deeper internal grooves and narrow profiles reliably. What do resolution and accuracy mean for daily checks? Resolution (0.05 mm) is the smallest scale step the vernier displays; the stated accuracy (±0.1 mm) indicates the practical measurement uncertainty under typical workshop conditions for the M201.135. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Internal Groove Caliper 0.05mm Vernier Matt Chrome INOX With Locking Screw In Case - Metav IndustryLine
Compact precision and robust workshop performance merge in this internal‑groove caliper: with a 0.05 mm vernier reading and a 10–160 mm measuring range, it delivers repeatable results for everyday metrology tasks. Combine precise resolution, stainless‑steel construction and a locking screw for secure readings — order via Metav Werkzeuge or contact our consultants for application advice. M201.134 — Internal‑groove caliper, 10–160 mm, 0.05 mm graduation The M201.134 is an analogue caliper designed for precise measurement of internal grooves and recesses in standard workshop and production environments. Precise 0.05 mm nonius reading Designed for internal groove measurements Matt chrome finish, stainless steel construction Integrated locking screw for secure readings Repeatable groove measurement with reliable resolution The analogue vernier provides a 0.05 mm graduation that supports clear, tactile readings, making the instrument suitable for quality checks where visual confirmation is preferred over digital displays. With a nominal accuracy of 0.1 mm, this caliper balances affordability and functional performance for routine metrology. The 10–160 mm range places it in the standard class of workshop calipers, offering a practical compromise between reach and stiffness for typical machine‑shop and metal‑working tasks. Corrosion‑resistant build for everyday workshop use Constructed from stainless steel (INOX) with a matt chrome finish, the instrument resists oils and light corrosion while preserving smooth sliding action. A 25 mm jaw length gives the measuring faces the necessary reach for many groove geometries without sacrificing stability. The integrated locking screw secures measurements during transfer to documentation or subsequent machining steps, reducing the risk of reading drift and improving process reliability on the shop floor. Ergonomic handling and straightforward functionality As an analogue instrument, the caliper offers immediate feedback and a familiar feel for operators who prefer mechanical gauges. The vernier scale and secure clamping provide consistent contact pressure and repeatable results across a series of measurements, supporting efficient in‑process control. Suited to internal groove inspection and related recess measurements, this tool is a pragmatic choice where a compact, robust instrument is required for repetitive tasks in production and maintenance environments. For reliable internal‑groove measurement and practical workshop supply, contact Metav Werkzeuge in Emmerich for tailored advice or to arrange procurement. Technical Data Article number: M201.134 GTIN: 4054469100654 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 10–160 mm Graduation: 0.05 mm Nominal accuracy: 0.1 mm Jaw length: 25 mm Special features Material: stainless steel (INOX) Finish: matt chrome Locking screw for secured readings Analogue vernier caliper Intended use: internal groove measurement FAQ What measuring range does this caliper cover? The instrument covers a measuring range of 10–160 mm, making it suitable for standard workshop tasks and groove measurements. What reading resolution and accuracy can be expected? The vernier scale provides a 0.05 mm graduation; the caliper is specified with a nominal accuracy of 0.1 mm, offering reliable repeatability for routine checks. Is the caliper corrosion resistant? Yes — the tool is made from stainless steel (INOX) and finished in matt chrome to improve resistance to oils and light corrosion in workshop environments. Does the instrument include a locking mechanism? An integrated locking screw is provided to secure measurements for transfer and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Precision Scratch Caliper T-Form, 100mm Stop, Hardened Chrome-Plated Steel, Delivered in Case - Metav IndustryLine
Benefit from a hardened special‑steel construction and a T‑form layout with a 100 mm stop for repeatable scribing and marking. The mechanical vernier with a fine‑adjustment spindle provides a 0.05 mm readability that supports consistent setup and faster job changeovers. Order the instrument directly via Metav Werkzeuge or consult our advisors for application support. M201.140 Precision Scribing Caliper — 160 mm T‑form with 100 mm stop (Metav IndustryLine) The M201.140 is a T‑form precision scribing caliper designed for layout and marking tasks in metalworking, jig production and toolroom set‑ups. T‑form design for precise scribing Hardened special steel, matt chrome finish Fine‑adjustment spindle for exact positioning Repeatable marking with a T‑form layout for standard workshop tasks The T‑form layout together with a robust bridge measuring 100 mm gives a stable contact point for repeated scribing and marking operations. Built from hardened special steel with a matt chrome finish, the instrument resists wear and retains a clear datum over many cycles. With a measuring range of 0–160 mm, the caliper falls into the Standard class of workshop calipers and thus offers the best compromise between reach, stiffness and one‑hand handling for everyday metalworking and machine‑shop tasks. The combination of a rigid T‑form and a defined stop shortens set‑up time when multiple identical marks are required. Precision control and industrial‑grade readability for setup accuracy A mechanical vernier with a reading of 0.05 mm gives industrial‑standard resolution for layout and control work; it is suited to production environments where quick visual confirmation is needed rather than submicron measurement. The integrated fine‑adjustment spindle enables gentle, controlled movements when positioning the scribing jaw, which reduces error introduced by manual thrust. For operations such as marking datum lines, transferring offsets to a workpiece or pre‑setting tools, this layout and control system increases throughput while maintaining reproducible results. Easy interpretation and practical guidance for non‑specialists The analogue vernier is straightforward to use: the main scale gives the rough value and the vernier index refines it to 0.05 mm increments—sufficient for workshop layout and pre‑machining checks. The fine‑adjustment spindle facilitates single‑turn micro‑movements to align the scribe precisely before marking. For users less familiar with vernier calipers, this instrument combines familiar mechanical feel with clear graduations to reduce training time and to integrate smoothly into existing inspection routines. Robust design reduces downtime and simplifies maintenance Surface treatment and material selection emphasise longevity: the hardened body and matt chrome plating limit corrosion and reduce glare without affecting sliding accuracy. The simple mechanical construction is easy to clean and inspect; wear points can be checked visually and corrected through routine adjustment rather than replacement. Metav’s role as a European quality filter amplifies these benefits: consistent component selection and stock control mean reliably similar tools across the workshop fleet, which helps to standardise measurement practice and reduces calibration complexity. Choose the Metav IndustryLine M201.140 T‑form precision scribing caliper for workshop‑ready accuracy and contact Metav Werkzeuge for application advice or specification support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.140 GTIN: 4054469100708 Customs tariff number: 90173000 Category: Calipers Brand: Metav IndustryLine Facts Measuring range: 0–160 mm Readability: 0.05 mm Bridge/stop: 100 mm Analog: mechanical vernier eClass: 21170344 Special features Material: special steel, hardened, matt chrome‑plated T‑form layout for scribing Fine‑adjustment spindle Mechanical construction for layout and marking tasks FAQ How precise is the M201.140 for typical workshop layout tasks? The M201.140 precision scribing caliper by Metav IndustryLine provides a readability of 0.05 mm, which is the industrial standard for many marking and setup operations and supports reproducible layout work. For which applications is the T‑form design most suitable? The T‑form caliper is ideal for repeatable scribing and marking, fixture set‑up and tool pre‑setting where a stable reference and a defined bridge (100 mm stop) speed up repeated operations in the machine shop. Does the M201.140 include fine‑adjustment for delicate positioning? Yes—this caliper features a fine‑adjustment spindle that enables controlled micro‑movements for precise alignment of the scribing jaw before marking. What materials and surface treatment are used in this instrument? The instrument is manufactured from hardened special steel and finished with a matt chrome plating to improve wear resistance and reduce reflection during use. Is the 160 mm range suitable for general mechanical workshops? A 0–160 mm measuring range places this instrument in the Standard class, offering a practical balance of reach and stiffness for everyday metalworking and toolroom measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2-40mm Five-Point Caliper Matt Chrome, Stainless Steel, Supplied in Case - Metav IndustryLine
Benefit from a compact micro-range instrument that combines reproducible 0.05 mm readings, a matt‑chrome stainless‑steel finish and five‑point measurement capability for dependable checks on fine components; order the instrument directly via Metav Werkzeuge or consult Metav’s advisers for application support. 5-Point Caliper M201.132 — Micro-range 2–40 mm, matt‑chrome stainless steel (Metav IndustryLine) The 5‑point caliper M201.132 is a compact mechanical vernier caliper designed for precision checks in fine‑mechanical and watchmaking environments, offering a robust stainless‑steel build and a focused measuring range. Compact micro-range 2–40 mm for fine work Matt‑chrome stainless‑steel construction Mechanical vernier with 0.05 mm graduation Accuracy tailored to fine mechanics This micro caliper is engineered for short‑span measurements where rigidity and repeatability matter. With a measuring range of 2–40 mm and a graduation of 0.05 mm, the instrument aligns with the common industrial expectations for analogue vernier calipers and delivers industrial‑standard resolution for routine workshop quality control. The short jaw geometry reduces torsion and makes the tool well suited to delicate parts, such as micro‑components and small housings, where a stable contact and clear mechanical reading are essential. Robust finish for everyday workshop use Constructed from stainless steel (inox) with a matt‑chrome surface, the caliper resists corrosion and maintains a consistent sliding action over time. The finish reduces glare on the scale and protects against workshop contaminants, supporting reliable daily operation. The tool is supplied in a protective transport case to safeguard the instrument during storage and transit, ensuring the measuring faces remain intact and the calibration condition is preserved. Mechanical operation and five‑point inspection capability The purely analogue vernier operation avoids the need for batteries and simplifies maintenance while providing tactile feedback for controlled measurements. The five‑point measurement function enables defined checks at several contact positions, which is useful for comparative inspection tasks and quick conformity checks on small parts. For technicians accustomed to mechanical calipers, this configuration offers straightforward, repeatable readings without electronic interfaces. Practical role in inspection and small‑batch production This caliper is particularly useful in precision workshops, micro‑assembly and maintenance departments, where short‑range accuracy and durability take precedence. The combination of a compact measuring span, corrosion‑resistant material and simple vernier operation makes it an efficient instrument for incoming inspection, jig checks and frequent go/no‑go assessments. Metav IndustryLine supplies this tool as part of a broader range aimed at democratising precision across small and medium‑sized operations. Contact Metav Werkzeuge in Emmerich to discuss how the Metav IndustryLine 5‑point caliper (M201.132) fits specific inspection tasks and to arrange supply or technical advice Technical Data Article number: M201.132 GTIN: 4054469100647 eClass: 21170329 Core specifications Measuring range: 2–40 mm Minimum range: 2 mm Maximum range: 40 mm Resolution / graduation: 0.05 mm Type: Analogue mechanical vernier Special features Material: stainless steel (inox) Finish: matt chrome Application: five‑point measurement Supplied in a protective transport case Category: Caliper (Messschieber) FAQ What measuring range does this caliper cover? The measuring range covers 2–40 mm, which places the instrument in the micro‑range for fine mechanical work. How precise is the reading on the scale? The mechanical vernier provides a graduation of 0.05 mm, matching common industrial expectations for analogue calipers. Is the caliper suitable for workshop use and transport? Yes. The stainless‑steel construction with matt‑chrome finish and the supplied protective transport case make it robust for daily workshop handling. Does the caliper require batteries or electronic maintenance? No. The instrument is a mechanical vernier caliper and operates without batteries or electronic components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Hier wird noch anderes html hinkommen um das wir uns später kümmern