messschieber beschriftung
Das hier ist der erste PLatzhalter
20-75mm Three-Point Caliper Matt Chrome, Stainless Steel, 0.05mm Scale, Supplied in Case - Metav IndustryLine
Take advantage of the compact 20–75 mm measuring range combined with a matt chrome-plated stainless finish and a 0.05 mm vernier resolution for reliable, workshop-grade measurements; order directly via Metav Werkzeuge or contact their advisors for application support. 3-Point Caliper M201.131 – analogue vernier, 20–75 mm range, matt chrome-plated stainless The 3-Point Caliper M201.131 is an analogue measuring instrument designed for precise three-point measurement of small components in fine mechanical and precision engineering applications. Compact 20–75 mm measuring range Matt chrome-plated stainless finish Analogue vernier with 0.05 mm scale Delivered in a protective case for transport Accurate measurement where space is limited This caliper is built for precision within a compact envelope: the 20–75 mm measuring range places it in the micro class for fine mechanical work, making it particularly suitable where short jaws and torsion-resistant geometry matter. The mechanical vernier offers a 0.05 mm reading, aligning with the industrial standard for analogue callipers and providing a clear, verifiable basis for quality control tasks. The three-point contact arrangement supplies a defined contact geometry that improves repeatability when measuring small diameters, stepped features or narrow bosses, so users gain consistent outcomes without complex procedures. Robust construction for everyday workshop use A matt chrome-plated stainless construction combines corrosion resistance with reduced glare, improving readout visibility under bright lighting. The analogue design avoids electronic dependencies and simplifies maintenance: the scale and slider can be cleaned and checked visually, while the durable finish preserves measurement integrity in harsher shop environments. This balance of durability and low-maintenance operation supports continuous production workflows and reduces downtime associated with delicate instruments. Practical delivery and application benefits Delivered in a protective case, the instrument is workshop-ready and protected during transport or storage. Its compact format and simple mechanical operation make it suitable for bench inspection, toolroom checks, and finely detailed assembly work in sectors such as horology, small-part manufacturing and precision fixtures. The caliper’s straightforward vernier readout helps operators document measurements quickly and supports traceable inspection routines with clear numerical values that fit established quality systems. Choose the Metav IndustryLine three-point caliper for dependable small-part measurement and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or via +49 2822 7131930 Technical data Article number: M201.131 GTIN: 4054469100630 Category: Calipers (Messschieber) Core technical figures Measuring range: 20–75 mm Minimum range: 20 mm Maximum range: 75 mm Reading / resolution: 0.05 mm Analogue (vernier) instrument Tariff number: 90173000 Special features and materials Material: stainless steel (inox) Surface: matt chrome-plated Measurement principle: three-point measurement Delivery: protective case for transport Intended use: precision fine-mechanical measurements FAQ What applications is this caliper best suited for? The three-point caliper is optimised for small-component work and fine mechanical tasks; the M201.131 excels in measuring narrow diameters, stepped features and components typical in watchmaking, small assemblies and precision fixtures. How fine is the displayed measurement and how reliable is it? The analogue vernier provides a 0.05 mm reading, which corresponds to the industrial standard for mechanical calipers and allows consistent, verifiable measurements suitable for routine workshop quality control. Is the instrument corrosion resistant and suitable for workshop use? Yes. The matt chrome-plated stainless construction offers corrosion resistance and reduced glare, making the tool robust for everyday use in production and inspection areas. Does the caliper come ready for transport and storage? The instrument is delivered in a protective case to safeguard the jaws and scale during transport and storage, ensuring it arrives workshop-ready. Who supplies this caliper and where can additional advice be obtained? The caliper is part of the Metav IndustryLine. For application guidance or further technical details, Metav Werkzeuge provides consultancy and product information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Rod Divider With Carbide Scribing Tips Ø25x100, Stainless Steel - Metav IndustryLine
Take advantage of the stainless steel construction and carbide scribing tips for robust, long‑range marking up to 2,000 mm; the solid 19 mm rod and 5 kg build ensure stability and repeatable results in workshop use. Order the beam compass directly via Metav Werkzeuge or consult our advisors for specification support. M201.277 Beam Compass 2000 mm with Carbide Scribing Tips (Metav IndustryLine) The M201.277 beam compass is a long‑reach marking instrument for scribing and layout work on large components, offering a 2,000 mm span and carbide tips for durable, precise scoring. Range up to 2,000 mm Constructed from stainless steel Fitted with carbide scribing tips Strong 19 mm rod, approx. 5 kg Stable long‑range marking for large components The beam compass is built for reliable, repeatable layout where extended reach matters. Its 2,000 mm span places it in the long‑range category for measuring and marking sizeable parts, combining reach with manageable handling. The robust 19 mm rod gives high profile stiffness, which reduces deflection during scribing; this results in more consistent centre lines and circles across the full span. The solid mass of the instrument (approx. 5 kg) helps maintain contact pressure and steadiness when working on plate, sheet or assemblies. Durable scribing performance with carbide tips Equipped with carbide (hard‑metal) scribing tips, the instrument resists wear and maintains a sharp contact point for extended use in the workshop. Carbide tips are particularly suited to repeated scoring on harder surfaces and provide a clean, visible line that speeds subsequent machining or positioning tasks. The tip geometry (Ø25 x 100 mm) offers a generous contact area for stability while allowing precise marking, reducing the need for repeat passes. Practical design for everyday industrial use Constructed from stainless steel, the compass withstands routine workshop conditions and offers corrosion resistance in humid or metalworking environments. The analogue design keeps the tool simple and serviceable: no electronics, no batteries, and immediate readiness. Compatibility information indicates suitability for diameter work up to 4,000 mm, making the instrument appropriate for layout on large wheels, rings, or circular flanges where extended circumferential marking is required. Handling, setup and workshop benefits The instrument's weight and rod diameter deliver a balance between rigidity and manoeuvrability: heavy enough to damp vibration during scribing, yet compact enough for manual positioning by one technician. The mechanical nature simplifies maintenance and inspection routines, and the clear, mechanical adjustment allows fine placement before marking. For production or prototyping environments, the compass serves as a dependable tool for transferring centre lines and radii without the complexity of powered devices. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M201.277 beam compass into workshop workflows and for prompt supply from Emmerich. Technical data Article number: M201.277 GTIN: 4054469182780 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Weight: 5 kg Material: stainless steel Facts Measuring range: 0–2,000 mm Maximum range: 2,000 mm Rod diameter: 19 mm Tip size: Ø25 x 100 mm Features Analogue design (mechanical) Supplied with carbide scribing tips Suitable for diameter work up to 4,000 mm Robust long‑range layout instrument ECLASS: 21170344 FAQ How large a span can be marked with this beam compass? The M201.277 beam compass covers a span up to 2,000 mm and is intended for long‑reach layout tasks in the workshop. Are the scribing tips wear‑resistant? Yes, the instrument is fitted with carbide scribing tips; these hard‑metal points provide durable, wear‑resistant marking for extended use. Is the compass suitable for very large diameters? The device is suitable for diameter work up to 4,000 mm, making it appropriate for marking large wheels, rings and flanged components. What is the instrument's weight and how does it affect handling? With a weight of approximately 5 kg and a 19 mm rod, the compass offers stability and reduced vibration during scribing while remaining manageable for manual setup. Is this a digital tool or a mechanical instrument? This is an analogue, mechanical beam compass designed for straightforward, serviceable operation without electronic components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Workshop Caliper Monoblock Fine Adjustment 0.05mm Vernier, Hardened Stainless Steel, 200mm Jaws, in Case - Metav IndustryLine
Take advantage of the combination of a 2,000 mm measuring range, hardened stainless-steel construction and a monoblock slide with fine adjustment to measure large components reliably; order the item directly via Metav Werkzeuge or contact our consultants for application advice. Workshop caliper M201.380 — long-range, hardened stainless steel with fine-adjustment The M201.380 workshop caliper is a long-range analogue measuring instrument designed for large-format components in heavy machining, fixture making and mould work. 2,000 mm measuring range Hardened stainless steel construction Fine-adjustment thumbwheel Monoblock slide for maximum rigidity Stable measurement for large components and assemblies The long-format design offers a generous 2,000 mm measuring range, making this instrument suitable where extended reach and repeatability are required. The monoblock slide reduces play and flex, so long-distance measurements remain reproducible across the full travel. The combination of a rigid one-piece slide and a hardened stainless-steel body with a matt-chrome scale provides both corrosion resistance and a durable, low-reflection readout that is easier to read under workshop lighting. This configuration is aimed at professional workshops and production environments that need dependable results on large workpieces. Precise mechanical reading with dual vernier scales The analogue vernier arrangement includes a 1/128" scale on the upper side and a 1/20 mm scale on the lower side, enabling both imperial and metric readings without electronics. The metric vernier corresponds to a readable increment of 0.05 mm, the common industrial standard for mechanical calipers, and is therefore suited to general workshop metrology and routine quality checks. The fine-adjustment thumbwheel ensures controlled closure of the jaws for consistent contact force, reducing human-induced variation during critical comparisons and setup tasks. Built to standard and engineered for workshop use The jaw length of 200 mm places the instrument within the testing scope of DIN 862 for calipers with that jaw size, meaning the product meets established mechanical tolerances for vernier calipers in this configuration. The absence of pointed tips (flat jaw style) focuses the tool on external, internal and step measurements of broad profiles rather than fine-pointed probing. The robust construction tolerates everyday use on the shop floor while preserving scale legibility and mechanical function over long service intervals. Practical benefits for production and inspection workflows As a non-electronic measuring tool, the device removes reliance on batteries and avoids issues with display failure; it is therefore a low-maintenance option for continuous operation. The fine-adjustment system combined with the monoblock slide increases operative speed for repetitive checks while maintaining the 0.05 mm reading granularity required in many production environments. Where long-range dimensional verification is frequent, this caliper supports faster set-ups, fewer tool changes and a smoother inspection routine. Specify the Metav IndustryLine M201.380 for long-range workshop measurement and contact Metav Werkzeuge for tailored delivery and application advice from Emmerich. Technical Data Article number: M201.380 GTIN: 4054469102047 ECLASS: 21170344 Manufacturer: Metav IndustryLine Material: hardened stainless steel with matt-chrome scale Type: analogue vernier workshop caliper Facts Measuring range: 0–2000 mm Jaw length: 200 mm Nonius: 1/128" (top) and 1/20 mm (bottom) Metric readable increment: 0.05 mm Conforms to DIN 862 for jaw length up to 200 mm Special features Monoblock slide for increased rigidity Fine-adjustment thumbwheel for controlled contact Hardened stainless-steel construction for durability Matt-chrome scale for reduced reflection and clear reading Flat jaws (without pointed tips) for broad-surface measurements FAQ What measurement range does this caliper cover? The M201.380 covers a measuring range of 0–2000 mm, designed for long-format inspection and layout tasks. What precision can be expected from the mechanical vernier? The lower vernier corresponds to a readable increment of 0.05 mm, providing the customary industrial mechanical precision for workshop calipers. Is the instrument suitable for heavy workshop environments? Yes, the hardened stainless-steel body and monoblock slide of the M201.380 are engineered to withstand demanding shop-floor use while keeping the scale legible. Which measurement tasks is this caliper intended for? The M201.380 is intended for external, internal and step measurements on large components, fixtures and assemblies where extended reach and stiffness are required. Does the caliper meet any standards? For the given jaw length of 200 mm the instrument conforms to DIN 862 specifications for mechanical vernier calipers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Workshop Caliper With Points 200mm Jaws 0.05mm Graduation Fine Adjustment Monoblock In Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
This long-range monoblock caliper combines a 2,000 mm measuring span with hardened stainless steel and a fine-adjustment spindle for reproducible large-format measurements. Order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. Workshop caliper M201.341 (Monoblock, 2,000 mm) – Metav IndustryLine The Workshop caliper M201.341 is a long-range, monoblock precision caliper engineered for reliable large-component measurement in demanding workshop and toolroom environments. Monoblock design for high rigidity Hardened stainless steel construction Fine-adjustment spindle for precise locking Delivered in protective case for transport Built for reproducible large-format measurement The caliper’s 2,000 mm measuring span classifies it in the Long category of workshop calipers, where profile stiffness is essential for repeatable results on sizeable components. The monoblock construction increases torsional rigidity and reduces deflection over the full travel, which translates to fewer measurement errors when checking long shafts, housings or fixtures. For production and inspection workflows this means faster measurement cycles and a lower risk of scrap due to unstable readings. Precise mechanical control and readable scale This instrument uses an analogue vernier arrangement with a nominal 0.05 mm resolution, matching the industrial standard for robust workshop measurement. The combination of a matt chrome scale and hardened stainless steel surfaces resists wear while maintaining clear, low‑glare graduations for repeatable readings. The integrated fine‑adjustment spindle allows smooth, minute closing control so incremental positioning is adjusted without over‑tightening; this preserves both accuracy and operator ergonomics. The dual vernier notation (1/128" top and 1/20 mm bottom) supports cross-referencing values in inch and metric contexts. Durable features for everyday workshop handling The caliper is supplied with dedicated measuring tips and extended jaws (200 mm jaw length) that aid access into deeper recesses and maintain contact stability on larger profiles. Delivery in a protective case ensures safe transport between workstations and helps protect the instrument against shock and contamination during handling. The design follows the DIN 862 guidance for jaw geometry up to 200 mm, with longer lengths manufactured to workshop standard to preserve measuring integrity across the instrument’s span. Practical use, maintenance and workshop benefits This instrument suits tasks such as checking long rails, fixture set-ups, bearing journals and casing assemblies where a long travel and rigid guideway are decisive. Routine care — wiping the guide surfaces clean, avoiding impacts and storing the caliper in its case after use — preserves the matt chrome scale and hardened surfaces. The simple mechanical construction makes on‑site adjustments straightforward and reduces dependency on batteries or electronics, supporting continuous operation in production environments. Contact Metav Werkzeuge in Emmerich for detailed specification advice and to discuss how the 2,000 mm monoblock caliper can be integrated into workshop inspection routines — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: M201.341 GTIN: 4054469101880 eClass: 21170344 Facts Measuring range: 2,000 mm Resolution: 0.05 mm Jaw length: 200 mm Vernier: 1/128" (top), 1/20 mm (bottom) Norm: DIN 862 (jaw length up to 200 mm; from 250 mm to workshop standard) Special features Monoblock construction Hardened stainless steel with matt chrome scale Fine‑adjustment spindle Measuring tips (points) Supplied in protective transport case FAQ What measurement range does the caliper cover and how is it classified? The instrument provides a 2,000 mm measuring range and is classified as a Long workshop caliper, designed for large-format components and assemblies. What level of precision can be expected from this analogue caliper? The analogue vernier offers a resolution of 0.05 mm, an industrial standard suitable for routine workshop inspection and reliable dimensional checks. Is the caliper suitable for deep or recessed measurements? Yes. The extended jaws (200 mm jaw length) and pointed measuring tips facilitate access to deeper recesses and help maintain stable contact on larger parts. How does the fine‑adjustment spindle improve measurement reliability? The fine‑adjustment spindle enables controlled closing and micro‑positioning, reducing the risk of overpressure and operator-induced variability during setting and locking. How is the caliper protected during transport? The instrument is delivered in a protective case to guard against impact and contamination while moving between workstations or sites. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Workshop Caliper Without Tips Monoblock Fine Adjustment 0.05mm Jaw Length 300mm Stainless Hardened Matt Chrome Scale, DIN 862 - Metav IndustryLine
Combine the monoblock construction, a fine‑adjustment screw and the extended 0–2000 mm measuring range to achieve reliable, repeatable long‑span measurements in workshop environments. Order the instrument directly via Metav Werkzeuge or contact our consultants for specification advice and delivery options. Workshop Caliper without Tips M201.381 – Long‑range 0–2000 mm, 300 mm jaws (Monoblock) A Workshop Caliper without Tips built for long‑span measurements and heavy workshop use, featuring a monoblock beam and a fine‑adjustment mechanism for precise incremental positioning. Monoblock hardened stainless steel beam Fine‑adjustment screw for precise positioning Transport case included for safe handling Accurate long‑span measurement for heavy workshop parts The caliper’s 0–2000 mm measuring range addresses large components that standard workshop instruments cannot reach. Its monoblock beam design increases profile stiffness so that measurements remain reproducible over long spans; this reduces deflection and improves repeatability when handling sizeable castings, housings or fixtures. The result is a dependable long‑range tool that bridges the gap between routine shop calipers and specialised length‑measuring systems. Simple, reliable vernier operation with fine adjustment This instrument is an analogue vernier caliper with a dual scale arrangement: Vernier 1/128" (upper) and 1/20 mm (lower), offering a practical readable division and a nominal 0.05 mm resolution for workshop control tasks. The integrated fine‑adjustment screw enables controlled approach and exact seating of the jaws before reading, which reduces user‑induced error and speeds up repetitive measuring cycles. For users familiar with vernier technique, the mechanical design gives fast, tactile feedback without electronics. Designed for workshop handling and transport safety Constructed from hardened stainless steel with a matt‑chromed scale, the caliper stands up to workshop conditions and resists corrosion while keeping scale legibility high. The 300 mm jaws provide deep reach where longer jaw geometry is needed, and the instrument is supplied in a transport case (plastic or wooden) for secure handling and storage—note that wooden cases for tools of this size are intended primarily for transport. The combination of robust materials and protective packaging supports daily use on the shop floor. Standards, scope and practical benefits The caliper is dimensioned and marked in accordance with recognised workshop practices; the declared norm is DIN 862 for shorter jaw lengths, while units with extended jaw lengths follow the manufacturer’s workshop standard when jaw length exceeds 250 mm. This long‑range solution delivers practical traceability for workshop inspection routines and, together with Metav’s product range, simplifies procurement and stock‑keeping for machines and jigs. The SKU M201.381 identifies the specific long‑span variant for ordering and inventory purposes. For application advice or to request a tailored quote for the Metav IndustryLine M201.381 long‑range caliper, contact Metav Werkzeuge in Emmerich—our specialists will advise on integration, delivery and packaging options. Technical Data Article number: M201.381 GTIN: 4054469102054 ECLASS: 21170344 Facts Measuring range: 0–2000 mm Jaw length: 300 mm Resolution: 0.05 mm Vernier: 1/128" (upper) / 1/20 mm (lower) Special features Material: hardened stainless steel with matt‑chromed scale Monoblock beam construction Fine‑adjustment screw Delivery in transport case (plastic or wooden) Conforms to DIN 862 up to 200 mm; >250 mm according to factory standard Category: Long‑range caliper (workshop) FAQ What measuring range does this caliper cover? The caliper covers 0–2000 mm, making it suitable for long‑span workshop measurements and large assemblies. Is the instrument suitable for heavy workshop use? Yes. The M201.381 features a monoblock hardened stainless‑steel beam and matt‑chromed scale designed for robust, repeated use in workshop conditions. How precise is the reading on this vernier caliper? The instrument provides a practical workshop resolution of 0.05 mm, with the vernier arrangement of 1/128" (upper) and 1/20 mm (lower) to aid fast, reliable readings. Does the caliper come protected for transport? The caliper is supplied in a transport case (plastic or wooden) to ensure safe handling during delivery; wooden cases for larger tools are primarily intended for transport rather than permanent storage. Which standard applies to this caliper? Shorter jaw variants follow DIN 862; for this long‑jaw version (300 mm jaws) the device is produced according to the manufacturer’s workshop standard for extended jaw lengths. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge 0.02mm Resolution Stainless Steel Matt Chrome Scale, DIN 862 In Case - Metav IndustryLine
The robust stainless-steel construction combined with 0.02 mm vernier resolution and a locking screw ensures reliable, repeatable depth readings for everyday workshop and inspection tasks; delivery in a protective case protects the instrument in transit. Order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Depth Gauge M204.041 — stainless steel depth gauge, 0.02 mm vernier (Metav IndustryLine) Depth Gauge M204.041 is an analogue depth measuring instrument designed for general workshop and quality-control tasks with a 200 mm measuring range and DIN 862 conformity Stainless steel construction with matt-chrome scale Vernier accuracy 0.02 mm (1/50 mm) Locking screw for repeatable readings Delivered in a protective case Consistent, traceable depth measurements for production control The instrument delivers 0.02 mm resolution through a bottom vernier, meeting the expectations of fine mechanical measurement where repeatability matters. The DIN 862 conformity signals that the design follows familiar metrological standards, which simplifies integration into existing inspection routines. The matt‑chrome scale and vernier improve contrast under workshop lighting, while the locking screw secures readings for transfer and documentation. This combination reduces measurement error and shortens time spent on rechecks, supporting a more efficient inspection workflow. Built to withstand daily workshop demands Manufactured from stainless steel with a matt‑chromed scale and vernier, the gauge resists corrosion and maintains readable graduations in mixed shop environments. The 200 mm measuring range places the instrument in the Standard class (measuring ranges up to 100–300 mm), offering the best balance of reach and stiffness for typical machining, metalworking and assembly tasks. A compact mass of approx. 0.18 kg and a practical bridge dimension of 100 mm keep the tool manoeuvrable while providing the structural rigidity needed for reproducible depth checks on fixtures and components. Practical handling that speeds up routine checks The analogue vernier mechanism is immediate and does not require batteries, providing dependable operation at the workbench. The bottom vernier layout offers clear reference for depth measurements and, together with the locking screw, enables stable readings during transfer or recording. Supplied in a protective case, the instrument is ready for secure storage and safe transport between workstations or to the inspection bench. This simplicity supports fast adoption by operators and ensures that calibration cycles focus on instrument traceability rather than day‑to‑day reliability. For reliable, workshop-ready depth checks choose the Metav IndustryLine Depth Gauge M204.041 — contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M204.041 GTIN: 4054469164007 Category: Messschieber Standard: DIN 862 Facts Measuring range: 0–200 mm Bridge: 100 mm Resolution: 0.02 mm (1/50 mm) Weight: 0.18 kg Instrument type: analogue (vernier) Special features Material: stainless steel; scale and vernier matt‑chromed Locking screw included Delivered in protective case Designed for standard workshop and inspection tasks Classified as Standard measuring range (100–300 mm) FAQ What is the measuring range of the depth gauge? The depth gauge M204.041 has a measuring range of 0–200 mm, suitable for Standard class workshop measurements. What resolution and vernier does the instrument offer? The instrument provides 0.02 mm resolution via a bottom vernier (1/50 mm), giving precise analogue readings for depth checks. Is the gauge suitable for use in a corrosive environment? The M204.041 is made from stainless steel with a matt‑chrome scale and vernier, offering good corrosion resistance for general workshop conditions. Does the depth gauge come with a protective case? Yes, the depth gauge is delivered in a protective case to safeguard the instrument during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge 0.05mm Vernier Stainless Steel Matt Chrome Scale, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of robust stainless steel construction, 0.05 mm vernier resolution and a secure locking screw for dependable depth measurement across routine workshop and inspection tasks — available directly via Metav Werkzeuge or by consultation with our experts. Depth Gauge M204.049 (Metav IndustryLine) — 200 × 100 mm, 0.05 mm vernier, stainless steel The Depth Gauge M204.049 is a stainless steel depth gauge for workshop and inspection use, compliant with DIN 862 and designed for reliable depth measurement in general machining and quality control. Stainless steel construction 0.05 mm resolution (1/20 mm vernier) DIN 862 compliant depth gauge Locking screw for repeatable readings Protective case for transport Reliable depth measurement for everyday workshop tasks This depth gauge is aimed at the workshop bench where repeatability and simple operation matter. The analog vernier reading with 0.05 mm resolution (1/20 mm) delivers a clear, battery‑free result that is easy to interpret on the matt‑chromed scale and vernier. Classified in the standard class (100–300 mm), the instrument balances reach with stiffness, making it suitable for everyday tasks such as checking bore depths, recesses or component shoulders where reproducible results speed up inspection routines. Precision and standards for reproducible results Constructed to meet DIN 862, the instrument provides a recognised reference for metrological checks in small to medium assemblies. The vernier system, which resolves to 0.05 mm, is a proven mechanical method: the user aligns the vernier lines with the main scale to read depths directly. This approach combines robust accuracy with straightforward traceability for shop‑floor documentation, supporting consistent quality control without relying on electronic systems. Robust build and user-friendly handling Made from stainless steel with a matt‑chrome finish on scale and vernier, the gauge resists routine workshop wear and remains legible under oil or light soiling. A dedicated locking screw secures the slider after measurement, reducing user‑induced variation and easing transfer of a reading. The bridge length of 100 mm provides stable contact across the gauge depth, while the compact form factor simplifies storage and handling during assembly work. Practical delivery and workshop integration The gauge is supplied in a protective case suitable for transport, which aids safe storage between uses and on the move. As a mechanically operated depth instrument it requires no batteries and integrates easily into conventional inspection processes. For procurement and recurring supply the association with Metav IndustryLine ensures access to spare parts and compatible measuring equipment, helping to maintain an uninterrupted inspection workflow. Contact Metav Werkzeuge for a specification check and reserve the M204.049 depth gauge for consistent, workshop‑ready depth measurement Technical Data Article number: M204.049 GTIN: 4054469102535 Standard: DIN 862 Type: Analog vernier depth gauge Resolution: 0.05 mm (1/20 mm) Measurement range: 0–200 mm Bridge length: 100 mm Locking screw: Yes Material: Stainless steel; scale and vernier matt chromium plated Delivery: Protective case included Facts Measurement range: 0–200 mm Resolution: 0.05 mm Nonius: 1/20 mm Classification: Standard class (100–300 mm) ECLASS: 21170349 Tariff number: 90173000 Special features Analog operation — no battery required Matt‑chrome scale and vernier for improved legibility Locking screw for repeatable readings Protective case for transport and storage Suitable for routine workshop and inspection tasks FAQ How precise is the instrument for routine inspection tasks? The M204.049 depth gauge offers 0.05 mm resolution via a 1/20 mm vernier, providing the repeatability expected for standard workshop checks and quality control within the 0–200 mm range. Is the depth gauge suited to both machining and assembly inspection? Yes, the instrument’s stainless steel construction and 100 mm bridge give the mechanical stability required for depth checks on machined parts and assembly fixtures. How is a measurement secured once taken? A locking screw is provided to fix the slider after taking a reading, which reduces variation during transfer and supports reproducible documentation. Does the instrument require batteries or electronic maintenance? No — the device is an analog vernier instrument and operates mechanically, eliminating the need for batteries and simplifying shop‑floor maintenance. What does the protective case mean for workshop use? The supplied protective case is intended for secure transport and storage, helping to keep the gauge protected from knocks and contamination between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge Stainless Steel Matt Chrome Scale And Vernier 1/50mm, DIN 862 In Plastic Case - Metav IndustryLine
Take advantage of the combination of stainless steel construction, DIN 862 conformity and a 200 mm measuring range for reliable workshop measurement. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice and supply. Depth Gauge FE 200×100×0.02 mm (stainless) – analogue depth gauge, DIN 862 The Depth Gauge FE 200×100×0.02 mm is an analogue depth gauge intended for workshop and inspection tasks, providing a 200 mm measuring range and vernier resolution suited to standard machine‑shop control. Stainless steel construction 200 mm measuring range Nonius 1/50 mm bottom vernier Conforms to DIN 862 Precision where repeatability counts The instrument delivers a clear 0.02 mm reading via a 1/50 mm nonius, which corresponds to the engraved resolution on the scale. This mechanical vernier design ensures dependable, repeatable readings without reliance on batteries or electronics; the analogue principle is particularly robust in harsher shop environments. Fine‑thread fine adjustment allows controlled approach to the measuring surface, reducing user‑induced variation and helping to maintain consistent results during serial checks or tool set‑up. Built for practical workshop use Constructed from stainless steel, with the scale and vernier matt chrome‑plated for reduced glare and improved contrast, the instrument resists corrosion and keeps legibility over long service intervals. The 200 mm reach places this tool in the standard measuring class used across machining and metalwork: a balance of range and stiffness that suits typical jobs such as fixture inspection, component depth checks and maintenance tasks. The compact bridge dimension supports stable placement while maintaining manoeuvrability on the shop floor. Clear standards and traceable performance Designed to meet DIN 862, the instrument aligns with familiar workshop documentation and quality routines. The bottom vernier layout provides intuitive reading for technicians accustomed to traditional calipers and gauges; when combined with the fine adjustment, it enables controlled measurement of recessed features and stepped depths. For operations requiring digital data capture, this analogue depth gauge complements sensor systems as a rugged reference tool in quality control chains. Choose the Metav IndustryLine depth gauge for robust, standard‑compliant depth measurement and contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply Technical Data Article number: M204.086 GTIN: 4054469102757 Norm: DIN 862 Material: stainless steel; scale and vernier matt chrome plated Measuring range: 0–200 mm Resolution: 0.02 mm (1/50 mm) Fine adjustment: yes Instrument type: analogue (vernier) ECLASS: 21170349 Tariff number: 90173000 Facts Measuring range max: 200 mm Measuring range min: 0 mm Bridge: 100 Nonius: 1/50 mm (bottom) Analog: true Special features DIN 862 compliance Matt chromed scale and vernier Fine adjustment mechanism Stainless steel construction Manufacturer: Metav IndustryLine FAQ How accurate is the reading on this depth gauge? The depth gauge provides a vernier resolution of 0.02 mm (1/50 mm), delivering the repeatability expected for standard workshop metrology and aligning with DIN 862 guidance. Is this instrument suitable for daily workshop use on oily or humid jobs? Yes—the stainless steel construction and matt chrome finish on the scale and vernier make the instrument robust against common workshop conditions and preserve legibility. Can the depth gauge be used for measuring recessed depths and steps? The combination of a 200 mm measuring range and the fine‑adjustment feature allows controlled, reproducible measurement of recessed features and steps in fixtures and housings. Which category does this instrument fall into for measuring range classification? With a 200 mm maximum range, the tool is classified in the standard range, suitable for general machine‑shop and metalwork tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Angle Attachment And Measuring Tip, DIN 862, Chrome Finish - Metav IndustryLine
Take advantage of precise depth measurement and a durable special‑steel build for consistent workshop results; the depth gauge with angle attachment 200×100 mm combines DIN 862 compliance with a fine 1/50 mm (0.02 mm) vernier for dependable readings. Order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Depth Gauge with Angle Attachment — 200×100 mm, DIN 862 (Metav IndustryLine) Depth Gauge with Angle Attachment — a robust mechanical instrument for depth and step measurements in metalworking and general workshop environments, compliant with DIN 862. Precise 1/50 mm vernier resolution DIN 862 standardised construction Special‑steel body with matt‑chrome scale Suitable for standard 200 mm measuring range Accurate depth measurement for dependable results The depth gauge with angle attachment delivers repeatable depth readings by combining a long, stable measuring beam with a finely graduated vernier. The instrument’s 1/50 mm (0.02 mm) vernier provides a level of precision commonly required in workshop quality control and toolmaking; this corresponds to the highest mechanical precision available for analogue callipers. Compliance with DIN 862 ensures the gauge meets recognised manufacturing and inspection standards, which supports reliable acceptance during in‑house checks and incoming inspection. The analogue layout permits immediate, battery‑free operation and straightforward reading once the vernier alignment is understood. Robust construction and clear scale for everyday use A body forged from special steel and a matt‑chrome scale and vernier combine corrosion resistance with low‑glare readability. The matt‑chrome finish reduces reflections under strong workshop lighting, making the scale easier to read during repetitive tasks. The engineered contact surfaces and angle attachment are designed to sit square to edges and steps, reducing measurement error from misalignment. Together, these features reduce rework and measurement uncertainty, supporting a steadier production flow and fewer inspection disputes. Practical measuring range and handling for the shop floor With a 200 mm measuring range the gauge falls into the Standard class for calipers and depth gauges — a size that balances reach with stiffness for most machine‑shop and metal‑fabrication tasks. The included measuring stop and angle attachment enable reliable depth and step measurements on housings, bores and fixtures without the need to improvised jigs. The instrument’s geometry and weight distribution aid one‑handed handling while the vernier slide runs smoothly for controlled approach to the measurement point. These practical advantages translate into faster set‑up times and more consistent quality checks in daily production. For robust, DIN‑compliant depth measurement from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M204.044 GTIN: 4054469102498 Standard: DIN 862 Analog: yes Nonius: 1/50 mm (bottom) Facts Measuring range: 0–200 mm Maximum measuring range: 200 mm Bridge: 100 mm Tariff number: 90173000 Special features Material: special steel Scale and vernier: matt‑chrome plated Measuring stop included Angle attachment for edge and step measurements Analogue vernier operation FAQ What measurement accuracy does the instrument achieve? The depth gauge uses a 1/50 mm (0.02 mm) vernier, giving mechanical resolution suitable for fine workshop tasks; the design follows DIN 862 for consistent measurement behaviour. Is this gauge suitable for general machine‑shop use? Yes. With a 200 mm range it is classified in the Standard group, offering a practical balance of reach and stiffness for typical metal‑working, fixture and component measurements. How does the angle attachment improve measurements? The angle attachment provides a square contact to edges and steps, allowing the beam to register depths and offsets reliably without the need for additional fixturing; this reduces alignment errors during measurement. Is the instrument digital or analogue and what does that mean for use? The instrument is analogue with a bottom vernier; readings are taken visually from the scale and vernier which requires no batteries and gives immediate, low‑maintenance operation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Double Hook And Removable Measuring Rod 0.02mm Nonius, DIN 862 - Metav IndustryLine
The combination of DIN 862 conformity, a 200 mm range and 0.02 mm vernier resolution makes this instrument a reliable choice for routine workshop depth checks and quality control. Benefit from a robust stainless‑steel build and an adjustable double‑hook measuring rod for versatile setups. Order the depth gauge directly via Metav Werkzeuge or request advice from our technical consultants if clarification is required. Depth Gauge M204.076 — depth gauge with reversible double‑hook, 200 mm, DIN 862 (Metav IndustryLine) The Depth Gauge M204.076 is a workshop depth gauge designed for precise depth, step and recess measurements in machinery, metal fabrication and general engineering applications Precision vernier 0.02 mm resolution Conforms to DIN 862 standard Adjustable double‑hook measuring rod Stainless steel with matt‑chrome scale Reliable metrology for everyday workshop tasks The instrument is built to supply reproducible results where consistent accuracy matters. Classified as a workshop‑standard depth gauge, it combines a 200 mm range with an analogue vernier that provides 0.02 mm graduations (nonius 1/50 mm), enabling fine readings for general machine‑shop tolerances. Compliance with DIN 862 ensures comparability with established measuring routines, so measurements can be integrated into inspection records and routine QC checks without ambiguity. The compact design keeps handling straightforward while preserving measurement integrity. Robust construction that reduces downtime Constructed from stainless steel with the scale and vernier matt‑chrome plated, the device resists corrosion and keeps scale legibility under workshop conditions. The reversible double‑hook measuring rod and removable measuring rod arrangement grant flexible fixturing on steps and recesses, simplifying setup for repetitive checks. At 0.16 kg the instrument is light to manoeuvre yet sufficiently rigid for stable contact, shortening inspection cycles and reducing the need for repeated measurements. Practical integration for productive inspection workflows With clear mechanical operation and no reliance on batteries, the gauge supports continuous use in production areas and inspection benches. The analogue vernier retains a tactile familiarity for technicians accustomed to classic calipers, while the DIN standardisation aids tool interchangeability across departments. The instrument is suited for standard‑range tasks in metalworking and mechanical assembly, delivering a pragmatic balance of reach, stiffness and readout precision that supports efficient process control. For workshops seeking a dependable workshop‑grade depth gauge, select the Metav IndustryLine Depth Gauge M204.076 and contact Metav Werkzeuge for tailored purchasing advice and specification support. Technical Data Article number: M204.076 GTIN: 4054469164106 Standard: DIN 862 Category: Messschieber SKU: M204.076 Facts Measuring range: 0–200 mm Resolution: 0.02 mm Nonius: 1/50 mm (bottom) Bridge: 100 mm Weight: 0.16 kg Special features Analog depth gauge (vernier) Reversible double‑hook measuring rod Stainless steel construction Scale and vernier matt‑chrome plated FAQ How precise is the depth measurement with this gauge? The Depth Gauge M204.076 provides a 0.02 mm vernier resolution (nonius 1/50 mm), suitable for standard workshop tolerances and conforming to DIN 862 for repeatable results. Can the instrument measure steps and recesses as well as depth? Yes, the adjustable double‑hook measuring rod and the gauge geometry allow measurement of depths, steps and recesses, making the tool versatile for common machining and assembly tasks. Is the gauge suitable for heavy workshop use? The depth gauge is made from stainless steel with a matt‑chrome scale and vernier, providing corrosion resistance and robust handling appropriate for regular workshop use. Does the product require calibration before use? The instrument is supplied as a precision mechanical measuring device; routine verification against a reference gauge is recommended to maintain traceability in quality systems. Which standards ensure compatibility with existing inspection procedures? The device is manufactured to DIN 862, ensuring compatibility with standard workshop inspection methods and documentation practices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Dual Hook And Removable Probe 0.05mm Vernier, DIN 862 - Metav IndustryLine
Take advantage of exact depth measurement, robust stainless‑steel construction and a practical double‑hook with switchable measuring rod for consistent workshop results; order the instrument directly via Metav Werkzeuge or consult the Metav advisors for application-specific guidance. Depth Gauge M204.074 — analogue depth gauge, 200 mm range, 0.05 mm graduation (Metav IndustryLine) A Depth Gauge M204.074 designed for standard workshop depth measurements, offering a double‑hook and switchable measuring rod for versatile inspection tasks in metalworking and machine shops. Analogue depth gauge with 0.05 mm resolution Double-hook, switchable measuring rod Stainless steel body, matt-chromed scale Includes protective carrying case Precise, repeatable depth measurements for routine quality control The instrument delivers reliable readings thanks to its 0.05 mm graduation via an analogue vernier (1/20 mm), meeting the requirements of DIN 862. With a measuring range of 0–200 mm, this tool sits in the workshop standard category, balancing reach and rigidity for everyday tasks in machining and metal fabrication. The vernier principle enables direct visual reading without batteries, providing consistent results for depth checks where electrical devices would be unnecessary. Robust construction and adaptable measuring geometry Built from stainless steel with a matt-chromed scale and vernier, the gauge resists corrosion while maintaining legibility under workshop conditions. The double-hook design and switchable measuring rod permit straightforward conversion between plain depth measurement and hook‑engaged applications, reducing the need for additional fixtures. The compact, balanced form supports single-handed operation and quick set‑up, which saves time on repetitive measuring sequences. Practical handling, transport and routine use Lightweight and manageable at approximately 0.16 kg, the tool is easy to position and manoeuvre when inspecting pockets, bores or stepped features in assemblies. Delivered in a protective carrying case, the instrument stays protected in transit and storage, helping to preserve scale accuracy and surface finish. For routine shop use the analogue design provides resilient performance with minimal maintenance requirements compared with electronic alternatives. Who benefits and why Metav supplies make sense This depth gauge is aimed at machinists, maintenance technicians and quality controllers who need trustworthy, repeatable measurements without overcomplication. The instrument is particularly useful for workshop setups, jigs and fixtures where a robust mechanical gauge is preferred. Metav’s offering combines an extensive product range and European distribution reliability, helping workshops access precision tools with clear supply lines and longstanding sector expertise. Contact Metav Werkzeuge for tailored advice on the Depth Gauge M204.074 and to arrange supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for application support and ordering information Technical Data Article number: M204.074 GTIN: 4054469102719 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.05 mm (vernier 1/20 mm) Bridge/rod length: 100 mm Weight: 0.16 kg Standard: DIN 862 Special features Stainless steel, scale and vernier matt-chromed Double-hook with switchable measuring rod Delivered in protective carrying case Analogue vernier (1/20 mm) Tariff number: 90173000 FAQ What accuracy can be expected from this depth gauge? The Depth Gauge M204.074 provides a resolution of 0.05 mm via an analogue vernier and is manufactured to comply with DIN 862 tolerances for workshop instruments. Is the instrument suitable for everyday machine-shop checks? Yes; the 0–200 mm range and robust stainless‑steel construction make the gauge appropriate for routine depth measurements in machining and metalworking environments. Does the delivery include protective packaging? The instrument is supplied with a protective carrying case to safeguard the scale and measuring surfaces during transport and storage. Can the gauge measure stepped features and bores as well as plain depths? Yes; the double‑hook and switchable measuring rod enable depth measurement of plain surfaces and engagement with stepped or recessed features. Is any calibration certificate included with the delivery? The product description does not indicate a supplied calibration certificate; calibration status should be confirmed if traceable calibration is required for quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Fine Adjustment, Stainless Steel Matt Chrome Scale, DIN 862 In Plastic Case - Metav IndustryLine
The combination of stainless steel construction, DIN 862 compliance and a fine‑adjustment screw ensures repeatable depth readings with industrial reliability; order the M204.084 depth gauge directly via Metav Werkzeuge or consult our specialists for application advice. M204.084 Depth Gauge (stainless steel, 200 mm) – Metav IndustryLine A M204.084 depth gauge for accurate depth checks in machining and workshop quality control, designed to meet DIN 862 requirements. Stainless steel body, matt‑chrome scale Fine adjustment screw for controlled contact Vernier resolution 0.05 mm (1/20) DIN compliant Dependable accuracy for daily shop measurement needs The 200 mm measuring range places this instrument in the standard class prized by machine shops for its balance between reach and stiffness. With a mechanical vernier designed to the DIN 862 norm and a resolution of 0.05 mm, the gauge provides a clear, quantifiable basis for acceptance decisions and set‑up checks. The fine‑adjustment feature keeps contact forces consistent during depth readings, which reduces measurement scatter and helps to prevent rework — an efficiency gain that translates directly into fewer production delays and more reliable quality control. Built to withstand workshop use while remaining easy to read Constructed from stainless steel with a matt‑chrome scale and vernier, the instrument resists corrosion and maintains legibility in demanding environments. The matt finish reduces glare under workshop lighting, improving contrast at the scale and supporting quicker, less error‑prone readings. Supplied in a protective case for transport, the gauge is ready for use on the bench or at the machine — robust handling and compact storage minimise downtime and protect the instrument between shifts. Mechanical design for low maintenance and continuous availability As an analogue depth gauge with a classic vernier mechanism, the tool requires no batteries or electronic upkeep, so operational readiness is immediate and predictable. The fine‑adjustment screw enables reproducible seating against the measured surface, which is especially useful during repetitive inspections or jig set‑ups. This simplicity makes the device a reliable companion for workshops, maintenance teams and toolrooms where durability and immediate availability are valued over electronic bells and whistles. Where this gauge adds value in production and inspection Ideal for machinists, maintenance technicians and quality inspectors, the gauge covers the typical measurement envelope used in metalworking and fabrication. The 200 mm range is a practical choice when broader reach is needed without giving up rigidity, fitting well as a complement to 150 mm and 300 mm tools in a calibrated toolset. Backed by Metav’s quality filter in Emmerich and a broad product range, the gauge supports consistent measurement chains across the shop floor and contributes to dependable production outcomes. Contact Metav Werkzeuge for advice on the Metav IndustryLine depth gauges and to arrange supply of the M204.084 from Emmerich. Technical data Article number: M204.084 GTIN: 4054469102733 Standard: DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.05 mm (1/20 vernier) Bridge / depth blade: 100 Special features Material: stainless steel; scale and vernier matt‑chrome plated Fine adjustment screw for controlled contact Analogue vernier mechanism Supplied in protective transport case FAQ What is the smallest increment that can be read with this depth gauge? The depth gauge provides a vernier resolution of 0.05 mm (1/20), allowing repeatable readings suitable for standard workshop tolerances. Is the instrument suitable for daily use in a metalworking shop? Yes, the stainless steel construction, matt‑chrome scale and fine‑adjustment screw make the M204.084 robust and practical for routine shop use and set‑ups. Does the gauge comply with any measurement standards? The instrument is produced to DIN 862, offering a recognised baseline for mechanical measuring tools used in industrial quality control. How is the depth gauge delivered and protected during transport? The gauge is supplied in a protective case for transport, ensuring safe handling and reduced risk of damage between jobs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Interchangeable Probe 0.05mm Vernier, Matt Chrome Finish, Supplied In Case - Metav IndustryLine
Benefit from a robust stainless steel construction, an interchangeable pin tip for recessed measurements and a precise 0.05 mm nonius for dependable depth checks in routine workshop work; order the depth gauge directly via Metav Werkzeuge or consult our specialists for application advice. Depth Gauge M204.064 — Analogue depth gauge with interchangeable pin tip, 0–200 mm, DIN 862 (Metav IndustryLine) The Depth Gauge M204.064 is an analogue depth caliper designed for machine‑shop and metalworking tasks, offering a 0–200 mm measuring range and a bottom vernier graduation of 0.05 mm for repeatable depth measurements. Stainless steel with matt-chrome scale Interchangeable pin-tip measuring rod Nonius 0.05 mm bottom graduation Conforms to DIN 862 for workshop use Accurate depth control that fits the workshop routine This depth caliper is engineered as a Standard-range instrument (0–200 mm), which covers the everyday requirements of machine and metalworking. The analogue nonius with a bottom graduation of 0.05 mm (1/20 mm) provides clear, verifiable readings for tasks where repeatability matters more than submicron resolution. Compliance with DIN 862 ensures that readings can be compared against recognised workshop tolerances, supporting efficient quality checks and reducing rework. The balanced combination of range and stiffness makes this gauge suitable for common assemblies, fixtures and small to medium components. Practical design for recessed and step measurements Equipped with an interchangeable pin tip and an extendable measuring rod, the tool adapts easily to a variety of recesses, pockets and stepped features. The body is made from stainless steel, while the scale and vernier are matt‑chrome plated, reducing surface glare and improving legibility under workshop lighting. At around 0.2 kg, the instrument is light enough for frequent handheld use yet rigid enough to keep readings stable. These design choices support faster inspection cycles and minimise handling errors during routine depth measurement tasks. Readability, care and benefits for everyday inspection The analogue layout keeps operation straightforward: the main scale indicates millimetres and the bottom vernier resolves to 0.05 mm, allowing technicians to perform quick checks without reliance on batteries or electronics. The simplicity of the mechanism reduces downtime and maintenance, while basic care — keeping the sliding faces clean and avoiding impacts — preserves accuracy. For operations seeking reliable gauging without excessive complexity, this depth caliper delivers consistent results and integrates smoothly into existing inspection workflows. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M204.064 can streamline depth checks in your workshop or to request tailored application guidance. Technical data SKU: M204.064 GTIN: 4054469102696 Tariff number: 90173000 Standard: DIN 862 Type: analogue depth gauge Material: stainless steel, matt‑chrome plated scale and vernier Facts Range: 0–200 mm Resolution: 0.05 mm (nonius 1/20 mm) Weight: 0.2 kg Bridge length: 100 mm eClass: 21170349 Special features Interchangeable pin‑tip measuring rod Bottom vernier for depth reads Suitable for machine‑shop and metalworking inspection FAQ How precise is the depth measurement with this instrument? The depth caliper provides a bottom vernier resolution of 0.05 mm (nonius 1/20 mm); as an analogue gauge conforming to DIN 862, it is suitable for standard workshop tolerances and repeatable depth checks with clear, verifiable readings. Can the measuring tip be adapted for narrow or deep recesses? Yes — the instrument features an interchangeable pin tip and an extendable measuring rod, enabling measurements in narrow pockets, bores and stepped features without loss of stability. Is this depth gauge suitable for everyday machine‑shop use? The gauge is classified in the Standard range (0–200 mm), covering the common requirements of machine and metalworking and offering a practical balance of reach, stiffness and one‑hand operation. Does the instrument require batteries or electronic calibration? No; this is an analogue depth gauge with a mechanical nonius. Readings are taken visually from the main scale and vernier, avoiding reliance on batteries or electronic components. What identifiers should be used when ordering or specifying this tool? Reference the Metav IndustryLine Depth Gauge M204.064, SKU M204.064, GTIN 4054469102696 for clear identification and procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Pointed Probe 0.02mm Resolution Stainless Steel, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, fine vernier resolution and corrosion-resistant stainless construction for reliable depth control in daily production. Order the depth gauge directly via Metav Werkzeuge or request advice from our consultants for application support. Depth Gauge with Pin Point M204.071 — 200 mm, 0.02 mm vernier (Metav IndustryLine) The Depth Gauge with Pin Point M204.071 is an analogue vernier depth instrument intended for precision depth measurement in machine shops, inspection benches and toolmaking environments. Vernier resolution 0.02 mm 200 mm measuring range for standard workshop tasks Stainless steel construction with matt chrome scale Conforms to DIN 862 vernier gauge standards Trusted precision for everyday workshop measurement The instrument delivers a 200 mm measuring range that places it in the standard class for workshop and metalworking tasks: the best compromise between reach and stiffness for routine inspection. The vernier resolution of 0.02 mm corresponds to the higher end of mechanical precision for analogue gauges and supports detailed depth readings where sub‑0.1 mm accuracy is required. Constructed from stainless steel with a matt chrome scale and vernier, the device resists corrosion and maintains legibility in industrial atmospheres. Conformance with DIN 862 guarantees familiar graduation and reading conventions for machinists and quality inspectors. Practical design that reduces measurement uncertainty A pinpoint measuring probe provides clear contact in small recesses and bores, while the instrument’s beam geometry (100 mm bridge) gives a stable reference for repetitive work. The lower-positioned vernier (1/50 mm bottom) is designed for reliable readings when the gauge is used on flat reference surfaces; the combination of the calibrated vernier and robust beam lowers operator-induced variability. As an analogue instrument, the gauge avoids electronic failure modes and is immediately usable without batteries, making it a dependable choice for on‑bench and in‑shop measurement routines where simple, repeatable depth checks are required. Applications, handling and upkeep Ideal for machine shops, toolmakers, mould and fixture assembly, the depth gauge excels at measuring step depths, slot depths and recesses. The analogue vernier format is straightforward to operate and to verify quickly against master gauges. Routine care consists of keeping contact faces clean and lightly oiled for storage; the stainless steel body simplifies maintenance and prolongs service life. Weighing 0.20 kg, the instrument is light enough for handheld work yet sufficiently solid to give stable readings during normal use. For users who prefer mechanical reading methods or require a rugged, zero‑power solution, this depth gauge offers an economical, durable option. For expert guidance on integrating the Metav IndustryLine depth gauge into inspection routines or to arrange procurement through Metav Werkzeuge, contact our team for tailored advice and ordering support. Technical Data Article number / SKU: M204.071 GTIN: 4054469164052 Manufacturer: Metav IndustryLine Net weight: 0.20 kg Standard: DIN 862 ECLASS: 21170349 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Bridge length: 100 mm Resolution: 0.02 mm Vernier: 1/50 mm (lower) Analogue operation: vernier (mechanical) Special features Pinpoint measuring probe for recesses and bores Body material: stainless steel Scale and vernier: matt chrome finish Suitable for workshop and inspection use Weight: 0.20 kg FAQ What accuracy can be expected from this analogue depth gauge? The Depth Gauge with Pin Point M204.071 delivers a vernier resolution of 0.02 mm, which represents high mechanical precision for analogue instruments and is suitable for many workshop inspection tasks. Is the depth gauge suitable for use in machine‑tool inspection and mould making? Yes, the Metav IndustryLine depth gauge is designed for standard machine‑shop and mould‑making applications where a 200 mm measuring range and stable beam geometry are required. How should the depth gauge be maintained to ensure long service life? Regular cleaning of contact faces and a light oil film on moving parts will preserve accuracy; the stainless steel construction of the M204.071 reduces corrosion risk and simplifies upkeep. Can the instrument measure depths in narrow bores or recesses? The pin‑point measuring probe is specifically intended to reach into narrow bores and small recesses, enabling reliable depth readings in confined geometries. Does the vernier follow a common standard for ease of reading and verification? The vernier conforms to DIN 862, making it compatible with established workshop reading techniques and straightforward to verify against master gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Pointed Probe 0.05mm Nonius Matt Chrome, DIN 862 - Metav IndustryLine
Combine reliable stainless‑steel construction with a precise 0.05 mm nonius and a protective transport case for consistent workshop results; order the depth gauge directly via Metav Werkzeuge or consult our technical team for application advice. M204.061 Depth Gauge with Pin Tip — 200 × 100 mm, 0.05 mm resolution (Metav IndustryLine) The M204.061 depth gauge with pin tip is a robust, analogue measuring instrument for precise depth and step measurements in general metalworking and workshop quality control. Stainless steel construction, matt‑chrome scale 0.05 mm nonius resolution Conforms to DIN 862 standard Delivered in protective case Precise, repeatable depth measurement for routine checks The analogue nonius provides a resolution of 0.05 mm, achieved by the 1/20 mm scale system, which makes the instrument suitable for standard industrial tolerances. Conformity with DIN 862 ensures that readings are comparable within common workshop and production environments. The simple mechanical design eliminates dependency on batteries and electronic calibration routines, offering straightforward, repeatable results when measuring recess depths or step features. The clear nonius scale and robust beam reduce reading errors and provide confidence during repetitive inspection tasks. Corrosion resistance and legible scale for long service life Constructed from stainless steel with a matt‑chromed scale and nonius, the gauge resists workshop contaminants and light corrosion, maintaining readability and dimensional integrity over time. The matt finish reduces reflections under bright inspection lamps, improving visual contrast on the graduations. Supplied with a protective case, the tool is protected during storage and transport, helping to preserve the measuring faces and pin tip from accidental damage. These material choices support sustained accuracy in daily use and reduce the frequency of maintenance interventions. Ideal format for general mechanical and metalworking use With a measuring range of 0–200 mm, this instrument sits in the Standard category for calipers and depth gauges, offering a practical balance between reach and rigidity for most workshop tasks. The 100 mm bridge provides a stable support when probing deeper features, and the modest mass keeps handling comfortable during single‑handed measurements. The unit weight of 0.2 kg makes it manageable for frequent use while retaining sufficient stiffness to avoid excessive deflection on typical components. This format is a versatile choice for machinists, toolmakers and inspection staff who need dependable, everyday measuring capability. Contact Metav Werkzeuge today to secure the Metav IndustryLine M204.061 for dependable 0.05 mm depth measurements — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for specifications and ordering. Technical Data Article number: M204.061 GTIN: 4054469102689 Manufacturer: Metav IndustryLine Core specifications Measuring range: 0–200 mm Resolution: 0.05 mm (1/20 mm nonius) Bridge: 100 mm Weight: 0.2 kg Customs tariff number: 90173000 Special features Stainless steel body Scale and nonius matt‑chromed Conforms to DIN 862 Analogue nonius readout Supplied in protective case FAQ What measuring range does this depth gauge cover? The depth gauge covers 0–200 mm, making it a standard‑length instrument suited to most workshop depth and step measurements. Is the scale easy to read under workshop lighting? Yes. The matt‑chrome scale and nonius on the M204.061 reduce glare and improve contrast for reliable readings in typical inspection environments. Does the instrument require batteries or electronics? No. The M204.061 is an analogue depth gauge using a mechanical nonius, so it operates without batteries and provides immediate readings. Is the gauge suitable for corrosion‑prone environments? The stainless‑steel construction offers improved corrosion resistance for workshop conditions; regular cleaning and proper storage in the supplied protective case will extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Removable Hook 0.02mm Vernier, Matt Chrome Scale, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust stainless steel construction, an interchangeable hook for versatile depth access and a precise 0.02 mm vernier for repeatable workshop measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for specification support. Depth Gauge with Interchangeable Hook 200×100×0.02 mm (DIN 862) — Metav IndustryLine A Depth Gauge with Interchangeable Hook engineered for standard workshop tasks up to 200 mm, offering reliable mechanical vernier accuracy and conformity with DIN 862. Stainless steel construction, matt chrome vernier Interchangeable hook for varied depth access Mechanical vernier with 0.02 mm resolution Supplied in a protective transport box Reliable depth measurement for everyday workshop use This depth gauge from Metav IndustryLine is designed for the typical demands of machine shops and metalworking departments, classified within the standard measuring range (100–300 mm). The instrument’s stainless steel body and matt‑chrome scale provide corrosion resistance and long service life, so measurements remain consistent even in busy production environments. Conformity with DIN 862 ensures that the gauge meets recognised mechanical calliper standards, which simplifies integration into existing quality procedures and inspection routines. Precision mechanics that support repeatable results A mechanical vernier with 0.02 mm resolution (1/50 mm) delivers fine graduations suited to accurate depth readings; this level corresponds to the higher end of mechanical calliper precision and is ideal when micrometre‑level electronic devices are not required. The interchangeable hook extends access to recessed features and stepped surfaces, reducing setup time and the need for improvised fixtures. Clear graduated markings and a firm sliding action minimise user error and improve throughput in routine inspection tasks. Practical handling, transport and storage benefits Thoughtful ergonomics and a low mass (approx. 0.16 kg) make the instrument easy to handle for single‑operator measurements, while the included protective transport box keeps the gauge secure between uses and during transit. The matt‑chrome finish on the scale and vernier reduces glare under workshop lighting, aiding quick, confident readings. Together, these features lower the risk of accidental damage and support consistent measurement practices across shifts. Contact Metav Werkzeuge for tailored advice on incorporating this depth gauge into production or inspection workflows — Metav Werkzeuge GmbH, Emmerich: info@metav-werkzeuge.com / +49 2822 7131930. Technical data Article number: M204.078 GTIN: 4054469164083 eClass: 21170349 Tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution (vernier): 0.02 mm (1/50 mm) Bridge: 100 mm Weight: 0.16 kg Standard: DIN 862 Special features Material: stainless steel, scale and vernier matt chrome‑plated Interchangeable hook for recessed depths Analog vernier instrument Supplied in a protective transport box FAQ What accuracy can be expected from this depth gauge? The Depth Gauge with Interchangeable Hook 200×100×0.02 mm (DIN 862) provides a mechanical vernier accuracy of 0.02 mm, suitable for precise workshop checks where high mechanical repeatability is required. Is the depth gauge suitable for use in a production quality control routine? Yes — the instrument’s DIN 862 compliance and robust stainless steel construction make the gauge appropriate for routine quality control tasks in machine shops and metalworking environments. Can the interchangeable hook be removed for shallow measurements? The interchangeable hook is designed to be switched out or removed so the gauge adapts to both recessed and shallow measurements, increasing versatility during inspection operations. Does the product include protective packaging for transport? The depth gauge is supplied in a protective transport box to prevent damage during storage and transit, ensuring the instrument arrives ready for immediate use. What is the manufacturer and how can product authenticity be verified? This depth gauge is offered under Metav IndustryLine; the SKU is M204.078 and the GTIN is 4054469164083 for verification against supplier records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Removable Hook 0.05mm Vernier, Stainless Steel, DIN 862 - Metav IndustryLine
Take advantage of the combination of dependable precision, robust stainless steel construction and a versatile adjustable hook for consistent depth measurement in the workshop. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Depth Gauge with Adjustable Hook M204.054 — 200 mm range, 0.05 mm graduation (Metav IndustryLine) The Depth Gauge with Adjustable Hook M204.054 is an analogue depth measuring instrument to DIN 862 designed for routine workshop and machine‑shop depth checks. Depth gauge »M204.054« by Metav IndustryLine 200 mm measurement range, standard workshop size 0.05 mm nonius graduation to DIN 862 Stainless steel body, matt-chromed scale and vernier Precision and conformity for reliable depth checks The depth gauge delivers consistent precision thanks to its vernier graduation of 0.05 mm, corresponding to a 1/20 mm nonius. Conformity to DIN 862 ensures the measuring behaviour and tolerances meet recognised workshop standards, which simplifies integration into established quality procedures. The analogue reading is immediate and does not depend on batteries, making the instrument a low‑maintenance option for repeated checks on housings, bores or stepped features where small depth deviations must be avoided. Design and materials built for everyday workshop use Manufactured from stainless steel with the scale and vernier matt‑chromed, the gauge balances corrosion resistance with clear legibility under workshop lighting. At approximately 0.16 kg, the instrument feels sturdy without being cumbersome, supporting single‑hand operation for routine tasks. The construction minimises play and wear at the sliding surfaces, which helps preserve measurement repeatability over time and reduces the need for frequent adjustment. Practical versatility for common depth measuring tasks An adjustable hook expands the range of applications by allowing measurements in recessed or stepped features where a fixed probe would be awkward. With a 200 mm measuring range the instrument falls into the standard category—ideal for most machine‑building and metalworking needs where a balance of reach and rigidity is required. The 100 mm bridge provides a stable reference when measuring deeper pockets or recesses, helping to keep the probe aligned and results reproducible. Simple operation and clear interpretation of results The analogue nonius system is straightforward: the main scale gives the base reading while the vernier adds the precise fraction, here 0.05 mm increments. For workshop staff familiar with vernier instruments, this arrangement is quick to use and avoids electronic failure modes. For those new to mechanical verniers, the method is easy to learn and offers a tactile sense of proper contact force, which supports controlled and repeatable depth measurements without overreliance on electronic aids. For workshop procurement or technical questions about the Metav IndustryLine depth gauge, contact Metav Werkzeuge in Emmerich for tailored advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M204.054 GTIN: 4054469102627 Standard: DIN 862 Type: Analogue depth gauge with adjustable hook Facts Measuring range: 0–200 mm Bridge: 100 mm Graduation: 0.05 mm (nonius 1/20 mm) Weight: 0.16 kg Special features Material: stainless steel Scale and vernier matt-chromed Analogue vernier reading Designed for workshop and machine‑shop use FAQ How accurate is the Depth Gauge with Adjustable Hook M204.054? The instrument provides a vernier resolution of 0.05 mm and complies with DIN 862, giving workshop‑level accuracy suitable for standard quality checks. Is this depth gauge suitable for everyday machine‑shop tasks? Yes—with a 200 mm measuring range and robust stainless‑steel construction, the gauge is intended for routine measurements in machining and metalworking environments. How is the vernier read on this analogue gauge? The main scale gives whole millimetres and partial millimetres while the vernier provides the additional 0.05 mm step; once aligned, the vernier line that matches the main scale indicates the fine fraction. What advantages does the adjustable hook provide? The adjustable hook allows the gauge to reach and reference recessed or stepped surfaces more easily, improving versatility when measuring pockets or internal depths. Which materials is the gauge designed to withstand in workshop conditions? Constructed from stainless steel with matt‑chromed scale and vernier, the gauge resists corrosion and retains legibility in typical workshop atmospheres. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Removable Probe And Interchangeable Rod 0.02mm Nonius, Supplied In Case - Metav IndustryLine
Take advantage of a stainless steel construction, DIN 862 conformity and a 0.02 mm vernier resolution for reliable, repeatable depth measurement in everyday workshop use; order directly via Metav Werkzeuge or consult the team for application advice. Depth gauge with probe tip and removable measuring rod — 200 mm range, 0.02 mm vernier (Metav IndustryLine) The depth gauge with probe tip and removable measuring rod is a precision analogue instrument designed for workshop and inspection tasks where accurate depth readings up to 200 mm are required. Stainless steel body, matt chrome vernier Measuring range up to 200 mm Vernier scale 0.02 mm resolution Conforms to DIN 862 standard Precision that supports consistent production quality This analogue depth gauge uses a finely graduated vernier to provide a resolution of 0.02 mm (1/50 mm), delivering the kind of repeatable measurement needed for routine quality checks and setup tasks. The vernier arrangement follows the conventions of mechanical metrology, making readings clear and verifiable without electronic dependencies. For maintenance and calibration planning, the instrument’s mechanical design keeps drift minimal and makes it straightforward to verify against a gauge block set or transfer standard. Robust materials for daily workshop demands Manufactured from stainless steel with a matt‑chrome finished scale and vernier, the instrument resists corrosion and surface wear, which preserves scale legibility and measuring reliability over time. The combination of corrosion resistance and a compact, lightweight form factor (approx. 0.2 kg) supports comfortable one‑hand operation while remaining durable enough for a production environment. Conformity to DIN 862 ensures the tool meets recognised German metrology practice, easing documentation and inspection procedures. Practical design for specialised depth tasks The supplied probe tip and the removable measuring rod enable measurements in narrow recesses and adaptable depths, so the instrument is suited to tasks from simple recess depth checks to more specialised jigs and fixtures. The tool’s construction balances stiffness and reach, placing it within the standard class for calipers and depth gauges (measuring range up to 200 mm), which is the workshop sweet spot for reach, rigidity and ease of handling. The analogue format avoids battery dependence and provides an immediate, tactile measurement workflow. Contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss this depth gauge and suitable metrology options Technical data Article number: M204.068 GTIN: 4054469164120 Category: Messschieber Numbers / Core technical data Measuring range: 0–200 mm Resolution: 0.02 mm (1/50 mm) Weight: 0.2 kg Standard: DIN 862 Designs / Special features Material: stainless steel with scale and vernier, matt chrome Measuring principle: analogue vernier Probe: fixed probe tip with removable measuring rod Delivery form: protective packaging included FAQ What is the measuring range of this depth gauge? The depth gauge offers a measuring range of 0–200 mm, placing it in the standard class for workshop metrology where reach and stiffness are balanced. How fine is the resolution and what does 1/50 mm mean? Resolution is 0.02 mm, indicated as 1/50 mm on the vernier. This provides mechanical precision suitable for general industrial measurement and workshop inspection. Is the device suitable for corrosive environments? The body is made from stainless steel with a matt‑chrome finish, which improves resistance to corrosion and wear during everyday use. Can the probe tip be adapted for narrow recesses? Yes; the removable measuring rod and probe tip allow the instrument to access narrow or deep recesses for specialised depth measurements. Does the gauge conform to any standards? The instrument is manufactured to DIN 862, ensuring compatibility with common metrological practices and inspection documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.01mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from the combination of a 0.01 mm dial readout, a 0–200 mm measuring range and four measurement modes for dependable workshop results; order the Dial Caliper "TOP" directly via Metav Werkzeuge or consult the company's advisors for application-specific guidance. Dial Caliper "TOP" — 0–200 mm, 0.01 mm dial readout (Metav IndustryLine) A Dial Caliper "TOP" designed for precise mechanical measurements in general workshop and fine‑mechanical tasks, offering a robust analogue dial and standard 0–200 mm range. Mechanical dial readout, 0.01 mm resolution External, internal, depth and step measuring Standard 0–200 mm range per DIN 862 Locking screw and thread table on reverse Precision where it counts: accurate analogue measurement for production The instrument delivers a 0.01 mm readout via a clearly graduated dial readout, providing consistently reproducible values for routine quality control and assembly work. Built to the DIN 862 standard, the caliper combines a standard 0–200 mm measuring span with a compact dial that gives crisp, mechanical feedback without reliance on batteries. This makes the tool particularly suitable for environments where reliability and simple, repeatable measurement are required; the analogue display reduces the risk of electronic failure and keeps calibration procedures straightforward. Practical versatility: four measuring functions for everyday tasks With four measurement functions — external, internal, depth and step — the caliper is a versatile companion for general machine‑shop tasks and small‑parts inspection. The pair of precision jaws (50/24 mm tip configuration) and the depth probe cover common workshop situations, while the locking screw secures the slider for transfer measurements. The reverse side carries a thread table to aid quick reference when working with threaded parts, reducing time spent consulting separate charts and improving workflow efficiency on the shop floor. Designed for handling and long‑term dependability A robust mechanical design with a 38 mm dial face and a single‑turn indicator provides an intuitive reading experience and fast cross‑checks during series work. The analogue caliper is easy to operate with one hand and its simple construction minimises downtime and maintenance needs — a practical advantage for busy production lines. Supplied with a protective transport case, the tool is ready for workshop use and safe storage between jobs, supporting good workshop practice and repeatable measuring conditions. For tailored advice on integrating the Dial Caliper "TOP" into existing inspection routines, contact Metav Werkzeuge to discuss specifications and suitability for your applications. Technical data Article number: M202.134 SKU: M202.134 GTIN: 4054469102337 Type: Dial caliper (analog) Measuring range: 0–200 mm Resolution/readout: 0.01 mm Standard: DIN 862 Facts Dial diameter: 38 mm Jaw length: 50/24 mm Measuring range max: 200 mm Readout resolution: 0.01 mm Special features 4-function measuring: external, internal, depth, step Locking screw Thread table on reverse side Supplied in protective transport case Analogue dial with single-turn indicator Conforms to DIN 862 FAQ How accurate is the Dial Caliper "TOP" for everyday workshop use? The Dial Caliper "TOP" provides a mechanical readout to 0.01 mm and conforms to DIN 862, offering the accuracy expected for standard workshop quality control and assembly tasks. Can the caliper measure internal and depth dimensions as well as external ones? Yes, the instrument supports external, internal, depth and step measurements, making the Dial Caliper "TOP" a versatile tool for a wide range of measuring tasks. Is the caliper ready for use straight away and how is it supplied? The Dial Caliper "TOP" is supplied ready for workshop use and comes in a protective transport case for secure storage and safe handling between jobs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.01mm Resolution, Four‑Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Combining 0.01 mm resolution, a 38 mm precision dial and reliable four-way measurement capability, this dial caliper delivers repeatable results across standard workshop tasks; order the dial caliper (SKU M202.034) directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Dial Caliper M202.034 — 0–200 mm, 0.01 mm resolution, 38 mm dial A dial caliper (M202.034) designed for precise workshop and quality-control measurements across the standard 0–200 mm range. Dial caliper 0–200 mm, 0.01 mm resolution 38 mm dial for quick, precise visual readings Four measurement functions: inside, outside, depth, step Conforms to DIN 862, robust workshop standard Precision that speeds quality control The instrument features a 0.01 mm graduation that supports fine inspection tasks while remaining intuitive for routine checks. The analogue dial gives an immediate visual confirmation of the measurement and avoids battery dependency, so shifts and repeated cycles in workshop environments remain uninterrupted. Built to the DIN 862 standard, the tool bridges bench-top accuracy and shop-floor robustness, enabling faster in-process verification without recourse to more elaborate metrology equipment. Built for workshop reliability and repeatability Mechanical construction prioritises stable jaw alignment and low play, which reduces measurement scatter during repetitive checks. The 38 mm dial enhances readability under varied lighting, while the solid slide action keeps readings steady when handling medium-sized components. This combination of visible feedback and mechanical stability translates into fewer re-measures and a smoother production workflow, especially where consistent tolerances are required across a batch. Versatile measurement for everyday tasks Equipped for four-way measurement — external, internal, depth and step — the caliper covers the most common inspection routines without swapping tools. The standard 0–200 mm range places it in the universal workshop category, offering the best compromise between reach and rigidity for typical machining, assembly and maintenance applications. A thread reference table on the reverse face supports quick cross-checks during fittings and fastenings, reducing the time spent searching for specifications. Practical aids that shorten cycle time Design details such as a clear dial, concise graduations and accessible jaws facilitate swift clamping and reading of parts, helping to cut inspection times. The mechanical nature of the device means minimal maintenance: occasional cleaning and light lubrication keep the slide accurate over long service intervals. For teams that value dependable, low-complexity tools, this caliper supplies straightforward, traceable measurement capability without the overhead of electronic systems. For dependable workshop metrology choose the Metav IndustryLine dial caliper M202.034 — contact Metav Werkzeuge for tailored advice and procurement from Emmerich. Technical data SKU: M202.034 GTIN: 4054469102238 Eclass: 21170344 Article number: M202.034 Facts Measuring range: 0–200 mm Resolution: 0.01 mm Dial diameter: 38 mm Weight: 0.47 kg Standard: DIN 862 Special features Analogue dial caliper Four measurement functions: outside, inside, depth, step Thread table on reverse side Mechanical construction for workshop use FAQ Is this caliper suitable for general workshop use? Yes. The Metav IndustryLine dial caliper M202.034 is designed for standard workshop applications with a 0–200 mm range and conforms to DIN 862. Can this caliper perform internal and depth measurements? Yes. The caliper supports four measurement functions — external, internal, depth and step — enabling versatile checks without additional tools. Does the instrument require batteries? No. The analogue dial mechanism on the caliper operates mechanically and does not need batteries, ensuring continuous operation in production settings. How fine are the graduations and what accuracy can be expected? The caliper offers a 0.01 mm graduation; combined with its mechanical stability and DIN 862 conformity, it is well suited for routine precision control in a workshop environment. Is there any reference information on the tool itself for thread sizes? Yes. A thread table is provided on the reverse side of the instrument to assist with quick checks during assembly and maintenance tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.02mm Resolution, Four-Function Measurement, DIN 862, Delivered in Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement (0.02 mm), a 200 mm measuring range and four measurement functions for reliable workshop control and repeatable results; order the instrument directly via Metav Werkzeuge or consult the Metav advisers for specification support. Metav IndustryLine Dial Caliper M202.033 – 200 mm, 0.02 mm resolution The Metav IndustryLine Dial Caliper M202.033 is a compact analogue caliper designed for standard machine‑shop and precision metalwork measurements, offering versatile inner, outer, depth and step measurement capability. 200 mm measuring range according to DIN 862 0.02 mm graduation with 38 mm dial Four measurement functions: inside, outside, depth, step Robust analogue movement for workshop use Proven fit for everyday workshop measurement needs This dial caliper sits in the standard measurement class (measuring range up to 300 mm), delivering the preferred balance of reach, stiffness and one‑hand usability for general machine‑ and metalwork. The 200 mm range covers the most common inspection tasks while retaining the handling characteristics that make quick checks and routine quality control efficient. Compliance with DIN 862 gives a recognised baseline for expectations in industrial environments and helps ensure compatibility with established measuring procedures. Reliable precision and clear readout for repeatable results With a 0.02 mm graduation presented on a 38 mm dial, the instrument provides a clear visual indication of fine increments while the analogue mechanism keeps the measurement chain straightforward and dependable. The caliper supports four measurement functions — outer, inner, depth and step — so a single tool can replace several more specialised gauges, reducing time spent switching instruments and improving process flow. The combination of high resolution and a substantial dial diameter simplifies reading in workshop conditions where speed and clarity matter. Durable construction and practical handling features The analogue drive is engineered for smooth sliding action and positive locking, giving dependable repeatability without the need for power sources; the analogue display means no batteries are required. Practical details such as the jaw geometry (schnabellänge 50/22 mm) and a thread table on the reverse add day‑to‑day usefulness for machining and inspection tasks. The mechanical design focuses on long service life and straightforward maintenance, so uptime in production or the toolroom is maximised. Where this caliper excels in application This instrument is particularly suited to workshops that require a blend of fine measurement capability and robust tool life: bench work, small assembly lines, fixture adjustment and precision repair all benefit from the instrument’s precision and versatility. Its analogue nature makes it ideal where a simple, low‑maintenance measuring tool is preferred over electronic devices, and the sizeable dial keeps readings accessible even under demanding shop conditions. For a tailored recommendation or to purchase the Metav IndustryLine dial caliper (SKU M202.033), contact Metav Werkzeuge for expert advice from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M202.033 GTIN: 4054469102221 eClass: 21170344 Tariff code: 90173000 Facts Measuring range: 0–200 mm Graduation: 0.02 mm Dial diameter: 38 mm Standard: DIN 862 Special features Analogue dial display (no batteries) Four measurement functions: inside, outside, depth, step Jaw length: 50/22 mm Thread chart on reverse side Analogue (mechanical) operation FAQ What measurement functions are available with this caliper? The caliper offers four functions — outside, inside, depth and step measurement — enabling versatile use with the Metav IndustryLine dial caliper M202.033. What resolution and dial size does the instrument provide? Readings are at 0.02 mm graduation on a 38 mm diameter dial, giving a clear, fine incremental display suitable for workshop inspection. Is the caliper compliant with recognised standards? Yes, the tool is specified to DIN 862, which aligns it with common industrial measuring requirements for calipers in the standard class. Does the caliper require batteries or electrical power? No — the analogue dial mechanism of this caliper operates mechanically and requires no batteries, simplifying maintenance and ensuring readiness. Is there any reference information on the tool itself to aid selection? A thread chart is printed on the reverse side of the instrument, and jaw geometry (50/22 mm) is indicated to assist with application planning for common workshop tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.02mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from the combination of 0.02 mm reading accuracy, a clear analog dial and practical four‑way measurement for reliable, repeatable checks in everyday workshop use. Order directly via Metav Werkzeuge or consult their advisors for application support and purchasing. Dial Caliper "TOP" 200 x 0.02 mm — Analog dial caliper, DIN 862 compliant The Dial Caliper "TOP" 200 x 0.02 mm is an analogue dial caliper designed for standard workshop measurement tasks, offering straightforward readability and robust mechanical operation according to DIN 862 Analog dial display, 0.02 mm resolution Measuring range 0–200 mm, standard class Four-way measurement capability Locking screw, thread table on reverse Accurate measurements that reduce rework and downtime The instrument is built for precise repeatability in routine inspection tasks: the 0–200 mm range places it in the standard caliper class, which balances reach and stiffness for most machine‑shop and metal‑fabrication work. With a calibrated reading step of 0.02 mm, the device provides clear, comparable results for external, internal and depth checks, helping to cut rework and accelerate quality control cycles. Compliance with DIN 862 gives a recognised reference for tolerances and acceptance criteria. Practical features for faster inspection workflows A large 38 mm dial improves legibility at the bench, while the mechanical design supports four‑way measurement (external, internal, depth and step) for versatile part inspection. The integrated locking screw secures the slide for transfer measurements and the thread table on the reverse offers a quick reference for common thread sizes during rapid checks. The analogue mechanism avoids battery dependence and keeps setup simple for repetitive measuring operations. Built for dependable workshop use and backed by Metav This caliper combines robust mechanical engineering with user‑oriented details so that routine measuring tasks stay consistent and fast. As part of Metav IndustryLine, the instrument benefits from a distribution and quality filter centred in Emmerich, supporting fleet procurement and reliable supply. Metav’s broad selection and long experience make this tool a practical choice for workshops that value traceable measurement, straightforward handling and sustained availability Contact Metav Werkzeuge for tailored advice on workshop adoption and procurement of the Metav IndustryLine Dial Caliper "TOP" — reach out at info@metav-werkzeuge.com or call +49 2822 7131930 for product guidance and order coordination Technical data Article number: M202.133 GTIN: 4054469102313 ECLASS: 21170344 Customs tariff number: 90173000 Norm: DIN 862 Facts Measuring range: 0–200 mm Reading / resolution: 0.02 mm Dial diameter: 38 mm Display: analog Four‑way measurement: yes Special features Locking screw Thread table on reverse Analogue dial mechanism SKU: M202.133 FAQ How accurate is the caliper for routine workshop measurements? The Dial Caliper "TOP" delivers a reading resolution of 0.02 mm and meets DIN 862 standards, providing the repeatability expected for standard workshop and machine‑shop quality checks. Which measurement types can be performed with this instrument? The unit supports four‑way measurement: external, internal, depth and step measurements are all possible with the same analogue caliper, enabling flexible inspection workflows. Is the instrument suitable for use in metalworking environments? Yes, the caliper’s 0–200 mm range and mechanical design make it well suited to metalworking and general machining tasks where a robust, easy‑to‑read instrument is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper Three-Point 0.02mm Resolution 4-Function Measurement, DIN 862, Plastic Case - Metav IndustryLine
Reliable workshop measurement combining a 200 mm measuring range, 0.02 mm reading accuracy and DIN 862 conformity for consistent routine checks. Order the dial caliper directly via Metav Werkzeuge or consult our specialists for application advice. Uhren‑Messschieber TOP 200 × 0.02 mm — Dial caliper with 200 mm range and 0.02 mm resolution (Metav IndustryLine) The Uhren‑Messschieber TOP 200 × 0.02 mm is a precision dial caliper engineered for standard workshop and quality‑control tasks, offering a clear analogue display and practical features for repeatable measurements. Precision dial caliper, 200 mm range 0.02 mm reading resolution Compliant with DIN 862 measuring standard Locking screw and rear thread table included Reliable precision for everyday workshop control The TOP dial caliper provides consistent accuracy with a reading step of 0.02 mm, placing it in the upper range of mechanical precision for analogue instruments. Designed to support standard production and inspection routines, the instrument’s compliance with DIN 862 gives a verifiable reference for measurement protocols and documentation. This results in fewer rework cycles and a measurable improvement in process reliability when used as a regular inspection tool. Clear visual feedback and secure handling for repeatable readings A clearly marked 38 mm dial and tactile slide design deliver fast, unambiguous readings that reduce interpretation errors during rapid checks. The integrated locking screw secures a measured value for transfer or marking, while the mechanical dial avoids battery dependency and simplifies maintenance. Together these features support faster throughput and reduce the risk of lost measurement data in busy workshop environments. Versatile four‑function measuring for multiple tasks Equipped for inside, outside, depth and step measurements, the caliper replaces several single‑purpose gauges in routine workflows. The four‑way capability streamlines tool sets and shortens setup time for changeovers. A thread table on the reverse adds practical reference data for threaded parts, helping to speed up decisions without reaching for additional documentation. Built to integrate with established workshop practices The analogue design combines robust mechanical construction with familiar operation, making it suitable for conventional machine shops and vocational training environments. Marked as a standard‑range caliper (up to 200 mm), it offers the best balance between reach and stiffness for everyday metalworking tasks. The instrument’s straightforward layout and DIN conformity facilitate inclusion in inspection routines and work instructions. Contact Metav Werkzeuge today for tailored advice on integrating the TOP dial caliper into existing inspection routines — our Emmerich team will support selection and practical application guidance Technical data Article number: M202.143 Brand: Metav IndustryLine GTIN: 4054469102375 eClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution / reading: 0.02 mm Dial diameter: 38 mm Reading system: Analog (dial) Standard: DIN 862 Special features Four measurement functions: inside, outside, depth, step Locking screw included Thread table on reverse side Analogue design for battery‑free operation FAQ What measurement functions are covered by this caliper? The device performs inside, outside, depth and step measurements; the TOP dial caliper (SKU M202.143) supports these four functions for versatile workshop use. How precise is the analogue display? The analogue dial reads in 0.02 mm increments, providing high mechanical resolution suitable for routine quality checks and production control. Is the caliper suitable for standard machine‑shop inspection routines? Yes. The caliper’s 200 mm range and DIN 862 conformity make it well suited to everyday inspection tasks in machine and metal workshops. Does the caliper include any features to help transfer or retain measurements? A locking screw secures the slide for transfer or marking, and a thread table on the reverse provides quick reference data for threaded components. Which brand and SKU identify this instrument for ordering and documentation? The instrument is supplied by Metav IndustryLine, identified as M202.143, and listed under GTIN 4054469102375 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Divider Caliper With Carbide Tips 0.1mm Nonius Locking, Hardened Special Steel - Metav IndustryLine
The 200 mm divider calliper combines a hardened special-steel construction with carbide tips and a 0.1 mm vernier, delivering durable, repeatable measurements for everyday workshop tasks; order the instrument directly via Metav Werkzeuge or contact our consultants for advice. M201.171.H divider calliper — 200 mm, carbide tips, 0.1 mm vernier M201.171.H is an analogue divider-style calliper designed for precise marking and measurement tasks in metalworking and toolmaking, offering robust wear resistance and clear vernier reading for standard workshop use. Hardened special steel construction Carbide measuring tips for wear resistance 200 mm range with 0.1 mm vernier Locking screw for repeatable settings Precise, wear‑resistant construction for reliable results The instrument’s frame is made from hardened special steel, which provides stiffness and dimensional stability during routine workshop use. Fitted with carbide tips, the device resists edge wear where contact is most frequent, maintaining accuracy over prolonged use. The 0.1 mm vernier allows precise analogue reading, making the calliper well suited to checks where straightforward, traceable measurements are required rather than digital readout convenience. These material and design choices reduce the need for frequent replacement and support consistent, repeatable measurement results. Designed to match standard workshop workflows With a measuring span classified as a Standard range instrument (0–200 mm), the calliper balances reach and rigidity—ideal for common machine‑shop tasks such as checking diameters, step heights and set distances on jigs and fixtures. The matt chrome‑plated vernier and scale minimise glare under bright workshop lighting, while the locking screw secures settings for transfer or repetitive measurements. The analogue mechanism provides immediate tactile feedback and a direct mechanical reference that fits established inspection routines in maintenance and production environments. Clear application scope and dependable quality This divider‑style calliper fulfils measurement needs across toolmaking, maintenance and general metal fabrication where a robust, simple instrument is preferred. The combination of hardened frame and carbide tips reduces measurement drift caused by tip deformation, and the vernier resolution supports concise conformity checks against drawing tolerances. Packaged as part of the Metav IndustryLine, the tool is aimed at workshops seeking durable, no‑nonsense measuring equipment that complements existing inspection chains and fixture setups. Request further specification sheets or consult Metav Werkzeuge for application advice and supply details — contact Metav Werkzeuge directly by e‑mail or phone for personalised support. Technical data Article number: M201.171.H GTIN: 4054469164274 EClass: 21170344 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution (vernier): 0.1 mm Analogue: yes Special features Material: hardened special steel; matt chrome‑plated vernier and scale Measuring tips: carbide Category: Messschieber / callipers Brand: Metav IndustryLine FAQ What accuracy can be expected from this divider calliper? The divider calliper M201.171.H uses an analogue vernier with a 0.1 mm resolution; combined with the hardened frame and carbide tips this yields stable, workshop‑level accuracy suitable for standard inspections. Is the M201.171.H suitable for marking and transferring distances? Yes, the divider‑style geometry and carbide tips make the M201.171.H appropriate for precise marking, transferring and distance checks on metal components and tooling. Which materials is this instrument intended to work with? The calliper is intended for general-purpose workshop use on metallic components; the carbide tips and hardened frame provide durability where contact with steel and similar materials is frequent. Does the M201.171.H include a locking mechanism for repeat measurements? Yes, the instrument is equipped with a locking screw to secure settings for repeatable measurements and transfer tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Hier wird noch anderes html hinkommen um das wir uns später kümmern