90mm 10 x 10 Right-Hand Bent Carbide Turning Tool DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of carbide P25/P30 cutting inserts, a bent 10 x 10 mm shank and DIN conformity for reliable external turning operations; order directly via Metav Werkzeuge or consult the technical advisers for tool selection and workshop integration. Wilke bent turning tool DIN 4972 (ISO 2), 10 x 10 mm, carbide P25/P30, right-hand The Wilke bent turning tool DIN 4972 (ISO 2) is a right-hand, carbide‑tipped turning tool with a square 10 x 10 mm shank and a bent geometry for precise external turning on conventional and CNC lathes Carbide P25/P30 cutting inserts Bent shank for external turning DIN 4972 (ISO 2) compliant Square shank 10 x 10 mm, 90 mm overall Consistent, high‑quality cuts through optimised carbide geometry The bent turning tool is equipped with carbide inserts in grade P25/P30, selected for a balanced combination of toughness and wear resistance that supports longer tool life and predictable changeover intervals. The diamond-ground cutting faces ensure a defined cutting edge, which reduces vibration and produces a consistent surface finish on turned parts. For production environments where cycle time and repeatability matter, the tool’s geometry contributes to shorter setup times and fewer rejected parts thanks to repeatable cutting performance. Secure clamping and vibration suppression for better surface results The square 10 x 10 mm shank and 90 mm overall length deliver firm seating in standard tool holders, improving rigidity and minimising chatter during cutting. The bent profile offers improved tool access for external contours and reduces interference with the workpiece or fixture, allowing deeper engagement where required. Combined rigidity and the right-hand cutting orientation translate into better stability, reduced tool deflection and an enhanced surface finish, which is particularly relevant for small-batch and jobbing workshops aiming to raise first‑pass yield. Standardised dimensions for fast replacement and workshop compatibility Compliance with DIN 4972 (ISO 2) means straightforward interchangeability with holders and fixtures made to the same standard, simplifying inventory management and reducing downtime when inserts or tools are changed. The tool’s construction—a steel shank fitted with carbide inserts—permits economical re‑use of shanks where applicable and fast replacement of the cutting element. For procurement and planning, the tool’s standard form factor supports modular tooling strategies and keeps fixture redesign to a minimum. Practical integration and procurement for production environments Supplied in a pack of 5, the tool balances stock availability with economical replenishment cycles; the compact format supports just‑in‑time restocking or small batch workshops. The article is listed as SKU 4118605052NW, enabling straightforward ordering and traceability. For technical clarifications or to confirm suitability for a specific turning task, enquiries can be directed to Metav Werkzeuge’s advisers, who provide assistance on tool selection and workshop integration without obligation. The emphasis remains on reliable supply and consistent precision from a single trusted source. Contact Metav Werkzeuge for procurement advice and technical matching to ensure the correct bent turning tool and inserts for the application Technical data Article number: 4118605052NW Product type: Turning tool Material: Carbide P25/P30 Shape: bent Standard: DIN 4972 (ISO 2) Direction: right-hand Overall length: 90 mm Cross-section: 10 x 10 mm Packaging unit: 5 Manufacturer (as stated): Werner Wilke Zerspanungstechnik GmbH Core specifications Overall length: 90 mm Cross-section: 10 x 10 mm Packaging unit: 5 Features & construction Steel shank with diamond-ground carbide inserts Carbide grade P25/P30 Bent design for improved access Right-hand cutting orientation Compliant with DIN 4972 (ISO 2) FAQ What material is recommended for this turning tool? The Wilke bent turning tool is supplied with P25/P30 carbide inserts; this grade offers a balance of wear resistance and toughness suitable for a wide range of general turning tasks. Is the tool compatible with standard DIN 4972 holders? Yes. Compliance with DIN 4972 (ISO 2) ensures compatibility with holders and fixtures manufactured to the same standard for straightforward interchange. What are the shank dimensions and overall length? The shank measures 10 x 10 mm and the overall length is 90 mm, as listed under SKU 4118605052NW for inventory and ordering. How is the turning tool delivered and in what quantity? The item is supplied in a pack of 5, which supports economical stock management and timely replacement. Can the carbide inserts be reconditioned or replaced separately? The tool features carbide inserts mounted on a steel shank; inserts are replaceable where the tool design permits, which reduces waste and keeps operating costs predictable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm 10 x 10 Side Turning Tool Carbide P25/P30 Offset DIN 4980 (ISO 6) Right-Hand - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of durable carbide tips, a standardised DIN shank and a compact 10 x 10 profile for consistent, repeatable turning operations. Order the side turning tool directly via Metav Werkzeuge or ask our consultants if needed. Wilke side turning tool 10 x 10 mm (carbide P25/P30), right-hand The Wilke side turning tool is an offset, DIN 4980 (ISO 6) compliant carbide-tipped cutter designed for precise external turning on lathes and workshop machines. Carbide P25/P30 tips for consistent wear resistance Offset design for precise lateral cutting DIN 4980 (ISO 6) shank fit for standard toolholders Right-hand cutting direction for conventional turning Durable carbide tips for steady production results Equipped with carbide P25/P30 cutting tips, this tool offers high resistance to abrasive wear and stable edge life under regular lathe conditions. The diamond-ground carbide faces deliver a reliable cutting geometry that maintains dimensional accuracy across runs, reducing part rework. For operations where flank wear and repeatability determine throughput, the robust tip grade supports consistent cycle times and fewer insert changes. Standardised shank and offset geometry for reliable set-up The DIN 4980 (ISO 6) specification ensures a standardised fit with compatible toolholders, which supports quick tool changes and dependable clamping. The offset (abgesetzt) configuration increases clearance behind the cutting edge, preventing interference on complex profiles and aiding chip flow. With a compact 10 x 10 mm cross-section and 90 mm overall length, the shank provides a balance of rigidity and accessibility for tight workpiece geometries while keeping vibration low for better surface finish. Practical integration into workshop workflows Designed for routine workshop use, the tool is built on a steel shank fitted with precision-ground carbide cutting tips for straightforward replacement or servicing. The right-hand cutting direction suits conventional turning setups and makes the tool a direct fit for typical production sequences. Its construction minimises downtime through straightforward handling and compatibility with standard fixtures, contributing to a smoother workflow and predictable machining results. For reliable, repeatable turning with Wilke carbide tips contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for ordering and technical advice. Technical data Article number: 4118640052NW Product type: Side turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH Standard: DIN 4980 (ISO 6) Core data Cross-section: 10 x 10 mm Overall length: 90 mm Packaging unit: 5 Special features Carbide: P25/P30 Offset design (abgesetzt) Steel shank with diamond-ground carbide cutting tips Right-hand cutting direction FAQ What materials is the Wilke side turning tool suited for? The Wilke side turning tool is supplied with carbide P25/P30 tips; suitability for specific materials depends on cutting speeds and feeds, so recommended parameters should be checked against the workpiece material. Will this tool fit standard holders? Yes, the shank complies with DIN 4980 (ISO 6) and is intended for holders matching that standard, enabling straightforward mounting in many lathe toolposts and turrets. Is the tool suitable for CNC use? When mounted in a suitable holder that accepts DIN 4980 (ISO 6) shanks, the tool is appropriate for both conventional and CNC turning centres, subject to correct clamping and machining parameters. How are the carbide tips maintained or replaced? The tool features a steel shank with precision carbide cutting tips; replacement and maintenance follow standard workshop procedures—consult Metav Werkzeuge for spare parts and service guidance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm 10 x 10 Straight Carbide Turning Tool Wide DIN 4976 (ISO 4) - Werner Wilke Zerspanungstechnik GmbH
Benefit from a combination of carbide P25/P30 wear resistance, a broad 10 x 10 mm cross section for stable cuts and conformity to DIN 4976 (ISO 4) for reliable interchangeability; order the tool directly via Metav Werkzeuge or ask the consultants for application advice. Wilke turning tool DIN 4976 (ISO 4) – 10 x 10 mm, Carbide P25/P30 A Wilke turning tool built for precise external turning tasks with a broad profile and diamond‑ground carbide cutting tips for consistent surface quality. Carbide P25/P30 for reliable wear resistance Broad 10 x 10 mm cross section for stability Conforms to DIN 4976 (ISO 4) for standardised use Steel shank with diamond‑ground carbide tips Consistent cutting performance for industrial turning The combination of carbide P25/P30 and a broad 10 x 10 mm cross section delivers stable cutting behaviour and extended tool life in repetitive production tasks. The selected carbide grade offers a balanced microstructure that promotes wear resistance while maintaining toughness under interrupted cutting. This results in fewer tool changes and more predictable cycle times, supporting a rational improvement in productivity and process reliability. Stable set‑up and straightforward integration into toolholders With a 90 mm overall length and a straight cutting design on a broad profile, the tool simplifies clamping and alignment in common turning toolholders. The robust cross section reduces chatter and improves dimensional consistency during external turning operations. The steel shank, fitted with diamond‑ground carbide cutting tips, ensures repeatable seating and ease of clamping, helping to reduce set‑up time and improve first‑pass yield in series production. Compliant form and exchangeability for workshop efficiency Manufactured to DIN 4976 (ISO 4) dimensions, the tool supports straightforward interchangeability across standard tool systems and fixtures. Conformity to the norm reduces the risk of incompatibility and streamlines inventory management. The straight cutting orientation and broad execution are particularly suited to tasks requiring stable, repeatable external profiling where form accuracy and surface finish are priorities. For reliable carbide performance and standardised workshop integration order via Metav Werkzeuge or consult Metav’s specialists for selection support Technical data Article number: 4118625052NW Label: Drehmeißel DIN 4976ISO4 10x10mm HM P25/P30 ger. breit Wilke Product type: Turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH UID: 4118625052NW Data Overall length: 90 mm Cross section: 10 x 10 mm Packaging unit: 5 Special features Material: Carbide P25/P30 Form: broad Cutting direction: straight Standard: DIN 4976 (ISO 4) Steel shank fitted with diamond‑ground carbide cutting inserts FAQ What materials is the Wilke turning tool suitable for? The Wilke turning tool is supplied with carbide P25/P30 tips; this grade is chosen for general turning tasks where a balance of wear resistance and toughness is required. Does the tool fit standard DIN 4976 toolholders? Yes, the turning tool complies with DIN 4976 (ISO 4) dimensions and is designed for compatibility with standard holders matching that format. What are the dimensions and length of the tool? The tool has a 10 x 10 mm cross section and an overall length of 90 mm, as specified on SKU 4118625052NW. What distinguishes the diamond‑ground tips? Diamond‑ground carbide tips provide a precise cutting edge finish and consistent geometry, supporting improved surface quality and repeatable cutting performance. Is this a straight or indexable cutting geometry? This item is supplied in a straight cutting orientation with carbide cutting tips mounted on a steel shank. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm 10 x 10mm Bent Turning Tool Carbide P25/P30 Left-Hand DIN 4972 (ISO 2) - Werner Wilke Zerspanungstechnik GmbH
The bent turning tool pairs diamond-ground carbide cutting plates (P25/P30) with a compact 10 x 10 mm shank for precise left-hand finishing cuts; its DIN 4972 (ISO 2) conformity ensures compatibility with standard toolholders. Order the turning tool directly via Metav Werkzeuge or consult the advisers for technical matching. Wilke bent turning tool — 10 x 10 mm, carbide P25/P30, left-hand A Wilke bent turning tool designed for precision left-hand turning and finishing in steelworking applications, compliant with DIN 4972 (ISO 2) Carbide P25/P30 cutting edges Bent profile for enhanced clearance 10 x 10 mm square shank Complies with DIN 4972 (ISO 2) Durable carbide grade for reliable steel machining The tool combines a robust P25/P30 carbide specification with diamond-ground cutting plates to deliver consistent edge life and predictable wear when machining common steels. The chosen carbide grades are optimised for general steel turning operations, offering a balance between toughness and hardness that reduces chipping risk while maintaining cutting performance. This translates into fewer insert changes and steadier component tolerances during longer production runs. Bent geometry that improves access and stability A bent profile provides additional clearance between the cutting edge and the workpiece, making it easier to reach internal faces, shoulders and interrupted cuts without interference. Compliance with DIN 4972 (ISO 2) guarantees a standardised tool shank interface, simplifying toolholder selection and ensuring a secure fit. The left-hand cutting orientation is suitable for operations where the tool must approach the workpiece from the opposite direction to right-hand tools, improving setup flexibility on complex parts. Compact shank and proven build for efficient changeovers The 10 x 10 mm square shank offers a compact footprint while delivering the rigidity necessary for finishing cuts. A steel shank fitted with diamond-ground carbide cutting plates combines the shock resistance of a metal body with the cutting performance of precision-ground carbide tips. This arrangement reduces set-up time and tool inventory complexity because the holder fits standard clamping systems and the cutting plates are manufactured to tight tolerances for repeatable positioning. Practical procurement and workshop assurance Sourcing through an established distributor ensures stock transparency and predictable delivery to the workshop bench. The construction and conformity to standards mean predictable performance across serial production and straightforward replacement planning. For workshops seeking to democratise precision, the combination of standardised shank dimensions, recognised carbide grades and a bent design offers both accessibility for operators and measurable gains in process reliability. For purchase enquiries, technical matching or a tailored quote for the Wilke bent turning tool (SKU 4118605502NW), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Technical data Article number: 4118605502NW Product type: Turning tool Label: Drehmeißel DIN 4972ISO2 10x10mm HM P25/P30 li. geb. Wilke Manufacturer: Werner Wilke Zerspanungstechnik GmbH Dimensions & measures Cross-section: 10 x 10 mm Overall length: 90 mm Packaging unit: 5 UID: 4118605502NW Materials & special features Carbide grade: P25/P30 Bent design Complies with DIN 4972 (ISO 2) Steel shank with diamond-ground carbide cutting plates Cutting direction: left-hand FAQ What materials is this turning tool suited for? The Wilke bent turning tool with P25/P30 carbide is primarily suited to machining steels and common steel alloys; the carbide grades provide a compromise between toughness and wear resistance suited to finishing operations. Is the tool compatible with standard DIN 4972 toolholders? Yes — the tool is manufactured to DIN 4972 (ISO 2) dimensions, ensuring compatibility with holders and clamping systems designed to that standard. What does left-hand cutting mean for setup? Left-hand cutting indicates the tool removes material when fed from right to left relative to the workpiece; this orientation should be matched with the lathe programme or operator setup to achieve the intended cutting direction. How are the cutting plates manufactured and why does that matter? The cutting plates are diamond-ground, providing a precise rake and clearance geometry which improves edge consistency, surface finish and repeatable positioning in the holder. Which SKU should be quoted when ordering or requesting technical data? Please reference SKU 4118605502NW when ordering, requesting spare plates or asking for compatibility checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm 10 x 10mm Offset Side Turning Tool Carbide P25/P30, DIN 4980 (ISO 6) Left-Hand - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of a carbide P25/P30 cutting tip, a compact 10 x 10 mm cross-section and a stepped steel shank for reliable left-hand side turning; order directly via Metav Werkzeuge or consult the product specialists if further integration details are required. Side turning tool DIN 4980 (ISO 6), 10 x 10 mm, carbide P25/P30 – Werner Wilke The Side turning tool DIN 4980 (ISO 6), 10 x 10 mm, carbide P25/P30 is a stepped side turning tool engineered for precise left-hand machining in standard DIN-compatible toolholders. Carbide grade P25/P30 tip 10 x 10 mm square cross-section DIN 4980 (ISO 6) interface Left-hand cutting direction Repeatable geometry for consistent production results The stepped design together with the DIN 4980 (ISO 6) interface provides a stable locating surface for toolholding systems and helps maintain repeatable cutting geometry across batches. A defined 10 x 10 mm cross-section ensures a predictable contact area in the holder, reducing setup variation. With a total length of 90 mm the tool achieves sufficient reach for many turning tasks without compromising rigidity, which supports steady cycle times and consistent tolerances. Durable tip and construction to lower maintenance needs Fitted with carbide P25/P30 cutting plates, the toolhead combines wear resistance with good fracture toughness for a wide range of turning operations. The steel shank is supplied assembled with diamond-ground carbide inserts, a finish that supports secure seating and accurate run‑out. These construction choices translate into longer intervals between insert changes and less unexpected downtime, contributing to improved overall equipment efficiency. Straightforward fitment and reliable cutting direction Compliant with the DIN standard, the tool is suitable for holders designed to accept the ISO 6 interface, simplifying retrofits or additions to existing tool racks. The left-hand cutting orientation is clearly defined for planning of workpiece clamping and toolpath direction in multi-spindle or reversing setups. As a compact side turning solution, the tool integrates cleanly into production lines where space and orientation are factors, while still delivering the rigidity expected from a stepped shank design. For assistance selecting the correct DIN-compatible toolholder or to discuss batch supply, contact Metav Werkzeuge for specialist advice and ordering support. Technical data Article number: 4118640502NW Label: Seitendrehmeißel DIN 4980ISO6 10x10mm HM P25/P30 li. Wilke Product type: Side turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH UID: 4118640502NW Facts Total length: 90 mm Cross-section: 10 x 10 mm Packaging unit: 5 Special features Material: Carbide P25/P30 Form: Stepped Standard: DIN 4980 (ISO 6) Cutting direction: Left-hand Construction: Steel shank fitted with diamond-ground carbide cutting plates FAQ Is this tool compatible with standard DIN 4980 toolholders? Yes. The side turning tool is manufactured to DIN 4980 (ISO 6) and fits holders designed for the ISO 6 interface. What is the cutting orientation and how is it marked? The tool is a left-hand cutter; the orientation is specified on the product label and in the SKU 4118640502NW description. Which carbide grade is used for the inserts? Diamond-ground inserts of carbide P25/P30 are fitted to the steel shank to balance wear resistance and toughness. What advantages does the stepped form provide? The stepped (abgesetzt) design improves seating stability in the holder and reduces run‑out, which supports repeatable turning accuracy. How many pieces are supplied per pack? The product is supplied in a pack of 5, as indicated in the technical data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm 10x10 Left-Hand Carbide Turning Tool Straight DIN 4971 (ISO 1) - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the robust combination of carbide P25/P30 cutting plates, a standardised 10 x 10 mm shank and a straight, left‑hand design to ensure consistent turning performance in small to medium batch work. For ordering or tailored advice, contact Metav Werkzeuge or consult the technical team for insert matching and machine optimisation. Turning tool DIN 4971 (ISO 1) — 10 x 10 mm carbide P25/P30, left‑hand, straight by Werner Wilke A turning tool built to DIN 4971 (ISO 1) for left‑hand external turning on lathes, featuring a 10 x 10 mm square shank and diamond‑ground carbide cutting plates for repeatable, stable cuts. Carbide grade P25/P30 inserts 10 x 10 mm square shank Conforms to DIN 4971 (ISO 1) Steel shank with diamond‑ground cutters Precision and reliability for repetitive turning tasks The straight turning bar delivers a stable cutting geometry, reducing vibration and maintaining edge position on repeated passes. Thanks to the carbide P25/P30 cutting plates, the tool combines toughness and wear resistance suitable for a wide range of steels, supporting consistent surface finish and dimensional accuracy. The standardised shank dimensions simplify toolholder setup and make the cutter compatible with common clamping systems, which reduces machine downtime during tool changes. Clear technical compatibility for workshop planning Conformance to DIN 4971 (ISO 1) means the shank and form are immediately recognisable in CNC and manual lathe environments, easing inventory and tool management. The 10 x 10 mm square section provides a compact profile for tight setups while still giving sufficient rigidity for typical external turning operations. The left‑hand cutting direction and straight form suit operations where the tool must cut when fed to the left, ensuring predictable chip flow and toolpath planning. Practical advantages of the steel shank with diamond‑ground plates Having a steel shank fitted with diamond‑ground carbide cutting plates separates holding strength from the cutting material: the shank absorbs clamping forces while the carbide plate carries the cutting edge. Diamond grinding on the plates improves edge consistency and reduces initial run‑in time, which leads to fewer regrinds and more productive time between maintenance intervals. For workshops aiming to standardise tool change routines, this design supports quicker assessments of wear and more reliable repeatability. Suitable applications and handling notes This tool is aimed at metalworking shops and production lines performing external turning on steels and similar materials where mid‑range toughness is required. The carbide P25/P30 grade is appropriate for general steel machining; however, machining parameters should be adapted to the specific machine rigidity and workpiece material to maximise insert life. Basic guidance: ensure correct clamping, check the left‑hand orientation before starting cuts, and inspect the diamond‑ground cutting plate for damage after heavy interrupted cuts. Contact Metav Werkzeuge for tailored insert recommendations and delivery from Emmerich — their specialists can advise on the best feed and speed settings for this Werner Wilke turning tool and ensure prompt supply to the workshop. Technical data Article number: 4118601502NW Product type: Turning tool Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Overall length: 90 mm Cross-section: 10 x 10 mm Standard: DIN 4971 (ISO 1) Cutting direction: Left Packaging unit: 5 Special features Material: Carbide grade P25/P30 Form: Straight Shank: Steel shank with diamond‑ground carbide cutting plates FAQ Which materials is this turning tool suitable for? The Werner Wilke turning tool is equipped with carbide P25/P30 plates and is suitable primarily for machining steels and similar materials where a combination of toughness and wear resistance is required. Is the shank compatible with common toolholders? The 10 x 10 mm square shank follows DIN 4971 (ISO 1) dimensions, so it is compatible with standard clamping systems designed for this profile. How should the left‑hand orientation be used on the lathe? Left‑hand cutting requires the tool to cut when fed to the left; confirm the toolholder orientation and programme the toolpath accordingly to ensure correct chip direction and clearances. What does the diamond‑ground finish on the carbide plates achieve? Diamond grinding produces a consistent cutting edge geometry and surface finish on the carbide plates, which helps reduce initial dressing time and supports better repeatability in batch production. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com