High-precision caliper gauges for rapid, repeatable measurements
Specialist caliper gauges and quick-test probes deliver fast, reliable geometry checks in production, incoming inspection and workshop use by mechanically or digitally capturing hard-to-reach features such as deep internal grooves, bore depths, tube wall thicknesses and freeform surfaces. Their spring-loaded lever mechanism ensures a defined contact force for absolutely repeatable results independent of the operator, while ergonomic designs allow one-handed operation with the workpiece remaining in the machine or on the inspection table. Available in a range of contact shapes and probe arm geometries, these precision calipers include analogue dial options for robust continuous use and digital models with tolerance signalling and data interfaces for seamless integration into quality control systems.
160-250mm Internal Micrometer Carbide Measuring Faces 0.015mm Resolution - Microtech Metrology
Combining ±0.015 mm accuracy, carbide measuring faces and a practical 160–250 mm measuring range, this internal fine measuring instrument delivers reliable, repeatable results for workshop inspection and assembly tasks — order directly via Metav Werkzeuge or ask their consultants for application guidance. Internal Fine Measuring Instrument by Microtech Metrology — 160–250 mm range, carbide measuring faces Internal Fine Measuring Instrument for precise internal dimension checks in metalworking and assembly environments High accuracy ±0.015 mm Vernier reading 0.01 mm resolution Carbide measuring faces for wear resistance Standard range 160–250 mm Precision that supports production quality The instrument is engineered for consistent internal measurements, offering ±0.015 mm accuracy and a 0.01 mm vernier reading that together reduce measurement uncertainty on critical fits and bore checks. As an analogue vernier device, it provides tactile feedback and proven longevity in workshop conditions. The presence of carbide measuring faces increases wear resistance at contact points, so calibration cycles remain longer and results stay stable even under frequent use. Range and handling tailored to everyday workshop use Classified as a standard-range caliper (100–300 mm), this tool covers the typical needs of machining and assembly shops while keeping handling and stiffness balanced. The 160–250 mm span is suitable for mid-sized internal features, and a measuring depth of 260 mm allows access to recessed bores and stepped components without improvised extensions. The combination of measuring depth and robust jaws supports accurate checks on housings, bearings and moderate-sized fixtures. Durable, low-maintenance design for repeated tasks Built with practical production use in mind, the instrument’s mechanical construction favours serviceability and reproducible results. The carbide contact surfaces resist abrasion from tougher alloys, and the solid vernier mechanism avoids the dependency on batteries or electronics, ensuring uptime on the shop floor. For quality-control loops where repeat measurements are required, the analogue display and mechanical feel help operators maintain consistent measuring force and technique. Why this instrument fits into a precision workflow Because the device balances high mechanical accuracy with durable contact materials and a work-oriented measuring range, it serves as a reliable inspection tool between bench gauges and larger metrology instruments. The analogue format is simple to integrate into existing procedures, and the measurable parameters—resolution, accuracy and depth—translate directly into fewer reworks and clearer acceptance decisions. Contact Metav Werkzeuge for tailored advice on integrating Microtech Metrology precision tools into production — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: 132250100 GTIN: 4061905453885 Manufacturer: Microtech Metrology Facts Measuring range: 160–250 mm Resolution: 0.01 mm Accuracy: ±0.015 mm Measuring depth: 260 mm Reading system: Vernier (analogue) Special features Carbide measuring faces Designed for internal measurements Category: Standard-range caliper (100–300 mm) Suitable for workshop inspection and assembly tasks FAQ What level of accuracy can be expected from this instrument? The Internal Fine Measuring Instrument from Microtech Metrology delivers an accuracy of ±0.015 mm, making it suitable for high-precision workshop inspections and quality-control checks. Is the device easy to use for recessed or deep bores? Yes. With a measuring depth of 260 mm and a 160–250 mm range, the instrument is designed to reach recessed features without auxiliary tools. What does the carbide measuring face offer in daily use? Carbide measuring faces provide enhanced wear resistance, so the Microtech Metrology internal measuring device maintains consistent contact geometry and extends service intervals under frequent use. Does the vernier system require batteries or special electronics? No. The device uses an analogue vernier reading with 0.01 mm resolution, eliminating the need for batteries and reducing electronic failure points. Can the instrument be used for workshop quality control routines? Yes. Its balance of accuracy, durability and practical measuring range makes it a reliable tool for routine inspection and acceptance testing in machining and assembly workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Micrometer Carbide Measuring Faces, 0.005mm Accuracy - Microtech Metrology
Take advantage of the combination of 0.005 mm repeatability, carbide measuring faces and a practical measuring range of 160–250 mm to boost inspection reliability in everyday workshop and small-series production. Order via Metav Werkzeuge or consult Metav's specialists for application advice and delivery options. Internal Fine Measuring Instrument (160–250 mm) — Analogue, 0.005 mm accuracy, Microtech Metrology An Internal Fine Measuring Instrument intended for precise internal diameter checks in workshop metrology and quality control tasks. High resolution 0.005 mm accuracy Carbide measuring faces for wear resistance Measuring range 160–250 mm for standard components Measuring depth 260 mm for deeper bores Precision where measurement errors become costly The instrument delivers a certified 0.005 mm accuracy that reduces uncertainty in pass/fail decisions and helps avoid rework. Its analogue dial provides a tactile, quick-reading display widely trusted in traditional metrology workflows; the fine resolution supports close tolerance checks without the need for complex electronics. By combining a compact mechanism with a measuring range of 160–250 mm, the device suits routine inspection of housings, sleeves and medium-sized bores while keeping handling intuitive for trained technicians. Durable construction for repeatable results Wear-prone contact points are fitted with carbide measuring faces, which maintain geometry under frequent use and extend service intervals. The robust spindle travel and a measuring depth of 260 mm allow inspections of deeper internal profiles without sacrificing stability. This mechanical reliability translates into less downtime and predictable measurement throughput, which benefits quality assurance teams aiming for steady production rhythms and reproducible results. Integrates into standard workshop quality routines Classified as a standard internal gauge (suitable for 100–300 mm ranges), the device balances reach and stiffness for everyday machine-shop tasks. Its straightforward operation minimises training time and speeds up inspection cycles, supporting rational productivity gains. For facilities seeking a dependable analogue instrument from Microtech Metrology, this solution provides the measured control needed for incoming inspection, in-process checks and final acceptance tests while fitting neatly into established calibration schedules. For precise internal diameter measurement with Microtech Metrology's high-accuracy instrument, contact Metav Werkzeuge for tailored advice and procurement: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 132250800 GTIN: 4061905453731 Brand: Microtech Metrology Category: Fine measuring instruments (Feinmessgeräte) eClass: 21170310 Numbers / Core technical data Accuracy: 0.005 mm Reading / resolution: 0.001 mm Measuring range: 160–250 mm Measuring depth: 260 mm Type: Analogue instrument Special features Carbide measuring faces Analogue dial indicator (mechanical) Standard classification for 100–300 mm range Suitable for workshop and quality control applications FAQ How accurate is the instrument and what does that mean for inspection? The instrument from Microtech Metrology achieves an accuracy of 0.005 mm, which means tolerances in the low micrometre range can be reliably checked for routine quality control of medium-sized components. Can this device measure deep bores and recessed features? Yes — the instrument offers a measuring depth of 260 mm, allowing inspection of deeper internal geometries typical in housings and sleeves within the 160–250 mm diameter range. Are the contact faces durable for frequent shop-floor use? The measuring faces are made from carbide, providing high wear resistance and consistent contact geometry under repeated use, which reduces drift and maintenance frequency. Which applications is this instrument best suited for? This standard-range instrument is ideal for workshop metrology tasks such as incoming inspection, in-process checks and final acceptance of medium-sized bores; the analogue dial supports fast, tactile assessments. What is the article number for ordering or referencing in documentation? Reference SKU 132250800 (GTIN 4061905453731) when enquiring or placing an order for the Microtech Metrology internal measuring instrument. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Micrometer Carbide Measuring Faces, 0.01mm Vernier Resolution - Microtech Metrology
Take advantage of precise analogue readout and robust carbide measuring faces for reliable internal diameter checks across a 160–250 mm span; the instrument's 0.01 mm resolution and ±0.015 mm accuracy support repeatable inspection results and reduce rework. Order via Metav Werkzeuge or consult our specialists for application advice. Internal precision gauge — analogue internal bore gauge, 160–250 mm, Microtech Metrology The Internal precision gauge is an analogue bore-measuring instrument designed for accurate internal diameter inspection in workshops and quality-control environments. Precise reading 0.01 mm Accuracy ±0.015 mm for reliable control Carbide measuring faces for wear resistance Measuring range 160–250 mm 1,000 mm measuring depth for deep bores Reduce rework with dependable accuracy The analogue instrument delivers a 0.01 mm reading step and an overall accuracy of ±0.015 mm, which supports consistent decision-making at final inspection. Such specification means that dimensional deviations are identified early, lowering the probability of rejected assemblies and time-consuming rework. The dial-type readout translates single measurements into immediate, easy-to-interpret values; for teams used to dial indicators, this familiar display speeds up throughput while maintaining clear traceability of measurement results. Built to withstand workshop conditions Equipped with carbide measuring faces, the device stands up to continuous use on harder surfaces and abrasive materials. Carbide tips preserve measurement geometry over many cycles, so calibration intervals remain predictable and wear-related drift is minimised. The measuring span of 160–250 mm combined with a measuring depth of 1,000 mm permits checks of medium-to-large bores and cavities without improvised extensions, improving ergonomics and reducing handling errors during repetitive inspection tasks. Streamlined inspection routine for internal diameters The analogue bore gauge design facilitates rapid comparative measurements and short inspection cycles: set reference points with a dial indicator and conduct successive checks with confidence in repeatability. The instrument’s simple mechanical construction supports quick maintenance and straightforward integration into existing inspection benches. For production environments that require regular checks across several stations, the combination of a clear dial readout and robust contact faces provides a pragmatic balance between precision and operational resilience. Order the Microtech Metrology internal precision gauge through Metav Werkzeuge for dependable European distribution, or request tailored application advice from our consultants in Emmerich Technical data Article number: 132250122 GTIN: 4061905453892 Manufacturer: Microtech Metrology Eclass: 21170310 Core specifications Measuring range: 160–250 mm Measuring depth: 1,000 mm Resolution (reading): 0.01 mm Accuracy: ±0.015 mm Instrument type: Analogue Special features Carbide measuring faces Dial indicator readout (messuhr) Category: Fine measuring instruments Intended for internal diameter measurement FAQ What measurement range and depth does the instrument cover? The instrument covers an internal measuring range of 160–250 mm with a measuring depth of 1,000 mm (SKU 132250122). What resolution and accuracy can be expected? Resolution is 0.01 mm with an overall accuracy of ±0.015 mm, suitable for routine workshop inspection and quality control. Are the contact faces suitable for extended use? Yes; the gauge is fitted with carbide measuring faces, providing enhanced wear resistance and stable geometry over prolonged use. Which applications is this instrument intended for? The device is intended for internal diameter measurement in machine shops and inspection departments where robust, analogue measurement of medium-to-large bores is required (Microtech Metrology internal precision gauge, SKU 132250122). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Micrometer Digital Touchscreen Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from reliable accuracy 0.012 mm, integrated Wireless + USB data transfer and an included ISO 17025 calibration certificate to streamline inspection cycles and reduce rework. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Internal Fine Measuring Instrument — digital internal gauge, 160–250 mm, Microtech Metrology The Internal Fine Measuring Instrument is a precision digital internal gauge designed for accurate bore and cavity measurement in workshop and production environments where traceability and fast data capture are required ISO 17025 calibration certificate included Measuring range 160–250 mm Wireless and USB data output Colour 1.5" touchscreen display Faster, traceable results through proven accuracy The instrument delivers a measured accuracy of 0.012 mm and a fine resolution of 0.0001, which together cut inspection uncertainty and shorten decision loops on the shop floor. With a measuring range of 160–250 mm, the device fits the standard category for general machine‑building tasks, providing the sweet spot between reach and rigidity. This balance reduces the need for repeated measurements and helps maintain consistent throughput during batch inspections. Immediate data transfer reduces manual entry and errors Equipped with Wireless and USB data outputs and a Colour 1.5" touchscreen display, the gauge enables rapid transfer of measurement results to SPC systems and inspection logs. The electronic interface minimises transcription errors, so recorded values flow directly into quality records. Two modular measurement heads support flexible set‑ups, meaning the device adapts to different bore geometries without procedural downtime. Built for workshop routines and consistent handling Designed as a digital internal gauge for everyday industrial use, the instrument features robust electronics and practical ergonomics suited to repeated handling. The specified measuring depth 3000 supports measurements in deeper housings and assemblies, while the compact display and intuitive controls reduce operator training time. Delivered fully calibrated, the instrument arrives with a traceable calibration certificate, ensuring immediate usability in production control. Traceability and compliance embedded in each measurement Calibration to ISO 17025 is performed prior to delivery and a calibration certificate is supplied with the device, supporting internal audits and supplier quality demands. The combination of certified calibration, digital data capture and a documented measuring range makes the instrument straightforward to integrate into quality management systems. The Microtech Metrology design philosophy emphasises repeatability and documented performance for regulated and industrial environments. For certified measurement capability from Microtech Metrology including an ISO 17025 calibration certificate, contact Metav Werkzeuge for tailored procurement and supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 131250745 GTIN: 4061905045936 Manufacturer: Microtech Metrology Data output: Wireless, USB Display: Colour 1.5" touchscreen Facts Measuring range: 160–250 mm Resolution (reading): 0.0001 Accuracy: 0.012 Measuring depth: 3000 Modules: 2 Special features ISO 17025 calibration certificate included Digital instrument, colour touchscreen Wireless and USB data output Category: Fine measuring instrument FAQ What measuring range does this instrument cover? The device measures within a 160–250 mm range, suitable for standard internal inspections and medium‑sized bores. Is the instrument delivered calibrated and with traceability? Yes, the Internal Fine Measuring Instrument from Microtech Metrology is supplied with an ISO 17025 calibration certificate, ensuring traceability for quality documentation. How are results exported to inspection software? Measurement values can be exported via the instrument’s Wireless interface or using the USB connection for direct import into SPC or measurement management systems. What is the resolution and typical uncertainty? The instrument provides a reading resolution of 0.0001 and an accuracy specification of 0.012, suitable for routine precision control in manufacturing. Can the instrument measure deeper housings or assemblies? Yes, the specified measuring depth 3000 allows measurements in deeper bores and components where extended reach is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Micrometer Retractable Measuring Head Digital 0.001mm Resolution ISO 17025 Calibrated - Microtech Metrology
The combination of a digital readout, 0.001 mm resolution and full ISO 17025 calibration ensures traceable inspection results with minimal rework; the measuring range 160–250 mm suits common workshop tasks. Order the calibrated instrument directly via Metav Werkzeuge or contact our consultants for application advice. Internal Fine Measuring Instrument – Digital, 160–250 mm range (Microtech Metrology) The Internal Fine Measuring Instrument is a digital internal gauge engineered for precise bore and internal-feature measurement in machine shops and inspection benches. Digital resolution 0.001 mm Measuring range 160–250 mm ISO 17025 calibration and certificate included 150 mm effective measurement depth Reliable metrology for reproducible quality control A clear, digital readout with 0.001 mm resolution reduces reading ambiguity and speeds up routine inspections, delivering measurable improvements in throughput. The instrument's stated accuracy of ±0.015 mm provides a trustworthy tolerance basis for process control; this level of precision translates into fewer rejects and lower downstream costs. Supplied with an ISO 17025 calibration certificate, the device supports documented traceability required in supplier audits and regulated production environments. Practical design focussed on workshop efficiency Classified in the standard range (160–250 mm), this internal gauge covers the everyday measurement needs of metalworking and machine construction while retaining good handling and stiffness. A 150 mm effective measurement depth enables access to deeper bores and recesses without resorting to special extensions, making routine checks faster and safer. The compact, instrument-style layout supports single-person operation and reduces the likelihood of handling-induced measurement scatter. Traceability and process integration made straightforward Delivered calibrated to recognised standards, the instrument simplifies first-article inspection and recurring quality checks by providing a documented baseline. The compact electronic format minimises manual interpretation errors, while the combination of resolution and accuracy makes it suitable as a reference tool for in-house control loops or upstream supplier validation. For procurement and stock management, the included traceable calibration certificate helps maintain compliance across multi-site operations. For calibrated, inspection-ready measuring equipment from Microtech Metrology, contact Metav Werkzeuge in Emmerich for tailored advice and assured supply Technical data Article number: 139250800 GTIN: 4061905043666 Manufacturer: Microtech Metrology Facts Measuring range: 160–250 mm Measurement depth: 150 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Display type: Digital Special features ISO 17025 calibration certificate included Standard class instrument for machine and metalworking (100–300 mm) Designed for internal measurements and quality control Category: Fine measuring instrument (digital) FAQ Is a calibration certificate supplied with the instrument? Yes. The Internal Fine Measuring Instrument from Microtech Metrology is delivered fully calibrated and includes an ISO 17025 calibration certificate. What accuracy and resolution can be expected during inspection? The device provides 0.001 mm resolution with a stated accuracy of ±0.015 mm, suitable for standard workshop quality control using the Microtech Metrology internal gauge (SKU 139250800). Which measurement depths and ranges are supported? The instrument covers an operating range of 160–250 mm with an effective measurement depth of 150 mm, making it appropriate for many bore and internal-feature checks. Is this instrument suitable for use in machine and metalworking environments? Yes. Classified in the standard (100–300 mm) group, the gauge is intended for everyday tasks in machine construction and metalworking and supports reproducible in-process inspections. Can the device be used as a reference for supplier audits? With its ISO 17025 calibration and supplied certificate, the Microtech Metrology internal gauge (SKU 139250800) is appropriate as a documented reference in supplier and internal audit procedures. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Micrometer Retractable Measuring Head Digital 0.001mm Resolution ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceability, high-resolution digital readout and a practical measuring depth for consistent internal inspections; the result is faster quality decisions, reduced rework and reliable documentation. Order the instrument directly via Metav Werkzeuge or consult the team for specification matching. Internal precision gauge with retractable measuring head — digital, ISO 17025 calibrated, 160–250 mm range (Microtech Metrology) An Internal precision gauge with retractable measuring head intended for workshop and laboratory internal-diameter checks, combining traceable calibration and a fine digital readout for routine quality control and production inspection ISO 17025 calibration certificate included Digital readout with 0.001 mm resolution Measuring range 160–250 mm Retractable measuring head for compact handling Traceable accuracy that speeds up quality decisions The instrument delivers a documented measurement chain thanks to the supplied ISO 17025 calibration certificate, which confirms laboratory-grade traceability and reduces audit effort. With an indicated accuracy of 0.025 mm and a fine 0.001 mm reading step on the digital display, the device supports dependable pass/fail decisions in machining and assembly processes. This measurable reliability shortens inspection cycles and lowers the probability of costly rework by providing verifiable results for production records. Designed for consistent internal measurements and repeatability Engineered for internal-diameter inspection, the gauge features a retractable measuring head and a generous measuring depth of 1000 mm, enabling checks on bore sections, stepped bores and deep housings without improvised fixtures. The digital interface simplifies reading and documentation, while the robust mechanical guidance keeps the measuring motion steady—this combination preserves repeatability across operators and shifts. The practical construction suits standard workshop use, offering the reach and stiffness expected from a standard-range internal instrument. Practical handling, documentation and workshop integration The digital format speeds data transfer and reporting, making it straightforward to integrate measured values into inspection logs or quality-management systems. The compact handling afforded by the retractable head reduces the need for complex set-ups and supports efficient throughput on the shop floor. Supplied by Microtech Metrology, the tool is positioned for users who require a balance of precision, traceability and operational efficiency in everyday metrology tasks. Contact Metav Werkzeuge for detailed specification matching and to request the Microtech Metrology internal precision gauge with ISO 17025 certificate and expert advice Technical Data Article number: 139250811 GTIN: 4061905044342 Brand: Microtech Metrology Digital: yes Facts Measuring range: 160–250 mm Measuring depth: 1000 mm Accuracy: 0.025 mm Resolution (reading): 0.001 mm ISO 17025: Certificate supplied Special features Retractable measuring head Supplied calibrated Category: Feinmessgeräte Intended use: internal diameter inspection FAQ What level of accuracy can be expected from this instrument? The device from Microtech Metrology is specified with an accuracy of 0.025 mm and a digital resolution of 0.001 mm, providing the traceable performance required for routine inspection tasks. Is a calibration certificate included with the instrument? Yes; the internal precision gauge is delivered with an ISO 17025 calibration certificate from Microtech Metrology, ensuring laboratory-grade traceability. For which applications is the 160–250 mm range best suited? This measuring range covers standard workshop needs for internal diameters on medium-sized components, offering the best compromise between reach and stiffness for machining and assembly inspections. Can the gauge measure deep bores? The instrument provides a measuring depth of 1000 mm, enabling checks in deep housings and stepped bores without extensive fixturing. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Micrometer Retractable Measuring Head Digital, ISO 17025 Calibrated - Microtech Metrology
The combination of ISO 17025 calibration, a 160–250 mm measuring range and a 0.001 mm display resolution ensures repeatable, laboratory‑grade internal measurements for shop and inspection tasks. Order this precision instrument directly via Metav Werkzeuge or consult our technical advisors for integration support. Microtech Metrology Digital Internal Micrometer — 160–250 mm, ISO 17025 calibrated The digital internal micrometer for precise bore measurement in machining, mould making and quality control, designed as a standard‑range instrument for workshop and production use. ISO 17025-calibrated delivery Measuring range 160–250 mm High resolution 0.001 mm display Laboratory accuracy that supports reliable decisions Delivered fully calibrated to ISO 17025, this digital internal micrometer provides a verifiable measurement chain suitable for incoming inspection and process control. The gauge combines a fine 0.001 mm display resolution with a manufacturer‑stated accuracy of ±0.035 mm, producing results that are both repeatable and traceable. For procurement and QA teams the calibration certificate eliminates uncertainty about conformity and speeds approval processes. Practical design that improves handling and throughput The instrument’s retractable measuring head and digital readout reduce set‑up time and simplify repetitive checks on internal diameters. As a standard‑range tool (160–250 mm), it offers the best balance between reach and rigidity for everyday workshop tasks. The compact measuring head reduces deflection at the contact points, which supports consistent readings and lowers rework rates in serial production. Technical characteristics that ease integration The digital interface and clear display help to standardise measurement routines across operators; the resolution of 0.001 mm supports fine adjustment and small tolerance verification. With a measuring depth specification of 3000 mm, the gauge is adaptable to applications requiring extended probe reach. The included ISO 17025 certificate documents calibration results and allows direct comparison with internal reference standards. Where this instrument adds value in the workflow Ideal for component bore inspection in turning, milling and toolmaking, the device is also suited to mould cavities and fixture bores where a robust, easy‑to‑read internal measurement is required. The certified accuracy and digital readout speed up quality gates and reduce dependence on subjective analogue interpretation, helping teams maintain throughput while upholding dimensional standards. Contact Metav Werkzeuge today for purchase and technical advice on this ISO 17025‑calibrated digital internal micrometer — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical data Article number: 139250833 GTIN: 4061905045172 Manufacturer: Microtech Metrology Digital gauge: Yes Calibration: ISO 17025 certificate included Facts Measuring range: 160–250 mm Display resolution: 0.001 mm Stated accuracy: ±0.035 mm Measuring depth: 3000 mm Special features Retractable measuring head Delivery includes calibration certificate Category: Fine measuring instruments (Feinmessgeräte) ECLASS: 21170310 FAQ What level of calibration is supplied with the instrument? The instrument is delivered fully calibrated to ISO 17025; the calibration certificate is included with the Microtech Metrology digital internal micrometer (SKU 139250833). Which measurement range does the device cover? The device covers an internal measuring range from 160 to 250 mm, making it a standard‑range instrument for general workshop and machine‑shop use. What is the display resolution and how does that affect inspection? The digital readout provides a 0.001 mm resolution, enabling fine discrimination of small dimensional changes and supporting accurate process control. Can this instrument be used for deep bores? Yes — the technical data list a measuring depth of 3000 mm, which allows measurement in applications requiring extended probe reach. How stable are results across repeated measurements? The combination of a rigid measuring head and the specified accuracy of ±0.035 mm, together with ISO 17025 calibration, supports repeatable results suitable for routine quality assurance. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Micrometer With Carbide Measuring Faces, 0.005mm Accuracy, Touchscreen Display Wireless/USB - Microtech Metrology
Take advantage of the combination of robust carbide measuring faces, precise 0.005 mm accuracy and versatile data outputs to keep inspection workflows efficient and reproducible; order the Internal Precision Gauge directly via Metav Werkzeuge or ask our consultants for tailored advice. Internal Precision Gauge — Internal measuring instrument with carbide faces and colour touchscreen by Microtech Metrology The Internal Precision Gauge is a workshop-grade internal measuring instrument designed for inspection and dimensional control tasks, combining wear‑resistant carbide measuring faces with a colour touchscreen and Wireless/USB data transfer for modern quality workflows. Carbide measuring faces for long service life Colour 1.54" touchscreen readout Wireless and USB data output 0.005 mm accuracy for fine measurement Precision that makes inspection decisions reliable This internal measuring instrument places measurement certainty at the centre of routine quality control. With an accuracy of 0.005 mm and a display resolution of 0.0001 mm, the device reduces doubt in pass/fail decisions and supports traceable documentation. The combination of mechanical stability and electronic readout delivers the rational benefit of shorter inspection cycles and fewer re‑measurements, which translates into measurable improvements in throughput and fewer production interruptions. Seamless integration into digital inspection processes Equipped with Wireless and USB outputs and a colour 1.54" touchscreen, the instrument supports both traditional bench use and digital data capture. Numeric readings and measurement logs can be exported for statistical process control or archived in a metrology database, enabling traceable records without manual transcription. The touchscreen simplifies mode selection and unit switching, making the instrument compatible with contemporary inspection software and shop‑floor data strategies. Built to withstand workshop use and maintain accuracy The gauge features carbide measuring faces, providing high wear resistance where repeated internal contact occurs. The instrument’s construction suits the demands of daily inspection: a robust feel for repeatable seating in the bore and a measuring depth of 260 mm that accommodates recessed features. Being an analogue instrument with a precise electronic readout, it brings together tactile handling and digital clarity, helping skilled operators retain control while benefitting from modern measurement fidelity. Right‑sized for typical machine‑shop applications Classified for the Standard workshop range, the device covers a measuring range of 160–250 mm, which fits common inspection tasks in machine‑ and metalwork. The scope is optimal for medium‑sized components such as housings, sleeves and machined bores where a balance of reach and rigidity is important. End users in production control, toolmaking and maintenance find the instrument a practical choice when repeatability and data capture are required without resorting to large metrology benches. Contact Metav Werkzeuge for a consultation and to secure the Microtech Metrology Internal Precision Gauge for reliable internal inspections Technical data Article number: 132250700 GTIN: 4061905454219 Brand: Microtech Metrology Facts Measuring range: 160–250 mm Measuring depth: 260 mm Accuracy: 0.005 mm Display resolution: 0.0001 mm Special features Carbide measuring faces Colour 1.54" touchscreen display Wireless and USB data output Analogue mechanical option with electronic readout FAQ What is the measuring range of this internal gauge? The gauge covers a measuring range of 160–250 mm, suitable for standard machine‑shop inspection tasks and medium‑sized components. How precise is the device for routine quality control? With an accuracy of 0.005 mm and a display resolution of 0.0001 mm, the Microtech Metrology internal instrument provides the precision expected for fine workshop inspections. Which data outputs are available for process documentation? Wireless and USB outputs are available for direct data transfer to inspection software or storage systems. Are the measuring faces durable for repeated use? Yes, the instrument is fitted with carbide measuring faces designed for high wear resistance during frequent internal measurements. Does the instrument support deep recess measurements? The device has a measuring depth of 260 mm, allowing measurement of recessed bores and inner features. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
160-250mm Internal Micrometer With Retractable Anvil, Digital, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of digital readout, ISO 17025 calibration certificate, and a practical 160–250 mm measuring range for reliable internal inspections; order the instrument directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Internal Precision Bore Gauge (digital) — Microtech Metrology, 160–250 mm range, ISO 17025 calibrated The Internal Precision Bore Gauge is a digital internal measuring instrument intended for accurate inspection of bores, recesses and internal features in workshop and quality-control environments. Digital display with 0.001 mm resolution ISO 17025 full calibration certificate included Measuring range 160–250 mm for workshop control Traceable accuracy for repeatable quality control This instrument delivers reliable measurement results thanks to its specified 0.03 mm accuracy and fine display step of 0.001 mm resolution. The difference between these two values is important: the resolution defines the smallest increment shown on the digital readout, while the stated accuracy describes the measurement uncertainty under defined conditions. Supplied with an ISO 17025 calibration certificate, the device supports traceable process control and documentation for audits. Designed for practical workshop and metrology use With a measuring range of 160–250 mm, the gauge falls into the Standard category used throughout machine shops and metalworking quality control, offering an efficient balance of reach and stiffness. The retractable measuring head simplifies access into bores and internal features while the compact electronics and clear digital readout reduce reading errors, making routine inspections faster and less dependent on operator interpretation. Measurement depth and handling for extended applications The instrument features a measuring depth of 2000 mm, enabling checks in deeper cavities and assemblies where surface access is limited. The carefully engineered retractable head and robust construction ease handling during repetitive checks, improving throughput in production or inspection routines and lowering the probability of handling-induced deviations. Built for inspectors who demand documentation and conformity Delivered fully calibrated to ISO 17025, the product includes a calibration certificate that documents conformity to international standards, simplifying incoming inspection and quality records. The combination of digital measurement, traceable calibration and a workshop-oriented measuring range supports efficient decision-making and reduces rework by providing trusted measurement data at the point of inspection. For application advice or to order the Microtech Metrology Internal Precision Bore Gauge, contact Metav Werkzeuge — our specialists in precision tools will assist with selection and delivery from Emmerich to your shop floor. Technical Data Article number: 139250822 GTIN: 4061905044724 Brand: Microtech Metrology Digital: yes Core specifications Measuring range: 160–250 mm Resolution: 0.001 mm Specified accuracy: 0.03 mm Measuring depth: 2000 mm Features & functions Retractable measuring head Digital readout ISO 17025 calibration certificate included FAQ What materials and applications suit this internal gauge? The Internal Precision Bore Gauge from Microtech Metrology is intended for general workshop and quality-control inspection of internal features such as bores and recesses; it is suitable for a wide range of metallic and non-metallic components typically measured in machine shops. Is the gauge supplied calibrated and documented? Yes — the instrument is delivered fully calibrated with an ISO 17025 calibration certificate, ensuring traceability and conformity for quality systems. How fine is the display and what does the accuracy mean in practice? The digital display shows 0.001 mm increments; the stated accuracy of 0.03 mm represents the expected measurement uncertainty under standard conditions and should be considered when defining inspection tolerances. Can the instrument be used for deep internal measurements? Yes — the unit has a measuring depth of 2000 mm, which allows verification of deeper bores or components where extended reach is required. Which SKU should be referenced when ordering or requesting documentation? Please refer to SKU 139250822 and the Microtech Metrology designation when placing orders or requesting the calibration certificate. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Precision Bore Gauge Carbide Measuring Faces, Colour Touchscreen Display, Wireless/USB - Microtech Metrology
Take advantage of 0.005 mm accuracy and carbide measuring faces for reproducible internal measurements across the 160–250 mm range; the hybrid analogue/digital concept with Wireless + USB output supports fast data transfer and traceable quality control. Order this instrument directly via Metav Werkzeuge or consult our specialists for application advice. Inside Micrometre – 160–250 mm measuring range, carbide faces (Microtech Metrology) The Inside Micrometre is a precision internal measuring instrument designed for workshop and inspection-room use, combining robust carbide measuring faces with a compact microcomputer interface for reliable bore, groove and stepped measurements. High-precision 0.005 mm accuracy Carbide measuring faces for wear resistance Wireless and USB data output 160–250 mm measuring range Precision where it matters: consistent bore measurement This internal precision instrument delivers a 0.005 mm accuracy, making it suitable for standard workshop metrology and first-line quality checks. The carbide measuring faces resist wear during repetitive use, which preserves measurement integrity and reduces recalibration frequency. The combination of a robust contact system and a compact electronic readout ensures repeatable results when inspecting bores, grooves and stepped components within the 160–250 mm span that corresponds to a standard measuring range for general machine and metalworking tasks. Modern data handling for efficient workflows Equipped with Wireless + USB data output and a colour 1.54" touchscreen, the gauge bridges manual measurement and digital documentation. Measurement values can be exported quickly to inspection software or spreadsheets, eliminating transcription errors and accelerating reporting. The hybrid analogue/digital arrangement also allows traditional visual checks to be complemented by secure electronic transfer — a pragmatic choice where traceability and speed matter. Designed for practical use in busy shops With a maximum measuring depth of 1000 mm, this instrument reaches into deep bores and assemblies that are otherwise difficult to access, while remaining manageable as a single‑operator tool. The device’s configuration suits the universal workshop requirement for balance between reach and stiffness: the 160–250 mm span represents the standard range that delivers good rigidity together with useful reach for many fixturing and housing inspections. The robust design and carbide faces reduce maintenance needs and increase uptime. Quality assurance and integration into inspection routines Accuracy and durable contact materials mean fewer measurement deviations and a more predictable inspection process. The unit’s readout resolution supports fine judgement in pass/fail decisions and SPC collection; combined with the wireless and USB outputs, this enables straightforward integration into a company’s quality-management workflow. For procurement decisions this translates into reliable measurement data, reduced rework and clearer evidence for quality audits. Contact Metav Werkzeuge today to discuss fit-for-purpose integration of this Microtech Metrology inside micrometre, or request tailored advice from our specialists at Metav Werkzeuge in Emmerich Technical Data Article number: 132250722 GTIN: 4061905453595 Manufacturer: Microtech Metrology Facts Measuring range: 160–250 mm Measuring depth: 1000 mm Accuracy (system): 0.005 mm Reading: 0.0001 Special features Carbide measuring faces Colour 1.54" touchscreen display Wireless and USB data output Hybrid analogue/digital interface FAQ What measurement range does this instrument cover? The instrument covers a 160–250 mm measuring range, making this Microtech Metrology inside micrometre suitable for standard internal measurements in machining and inspection. How precise is the measurement and which tolerance class does it meet? The device provides an accuracy of 0.005 mm, which is appropriate for standard workshop precision and routine quality checks where reproducible results are required. Are the measuring faces durable for repetitive shop use? Yes; the gauge is fitted with carbide measuring faces, ensuring wear resistance and longer intervals between maintenance and service. How can measurement data be exported from the unit? Measurement results are available via Wireless + USB outputs, allowing direct transfer from the inside micrometre to PCs or inspection software for logging and analysis. Is the instrument suitable for deep bores and assemblies? With a measuring depth of 1000 mm, the instrument is designed to access deep bores and internal features that require extended reach. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Precision Gauge Depth 1000mm, 0.01mm Resolution, Repeatability 0.02mm - Metav IndustryLine
Take advantage of the combination of high-resolution 0.01 mm readout, 1,000 mm reach and robust, workshop-ready construction for consistent bore inspections and faster quality decisions. Order the instrument directly via Metav Werkzeuge or consult the advisers for specification matching and delivery. Inside fine measuring gauge M208.428 — analogue internal dial gauge, 160–250 mm range with 1,000 mm reach The Inside fine measuring gauge M208.428 is an analogue internal measuring instrument with a 0.01 mm dial resolution, intended for precise internal diameter and depth checks in machining, toolmaking and quality control applications. 0.01 mm high-resolution dial reading Measuring range 160–250 mm 1,000 mm reach for deep bores Repeatability 0.02 mm Precision that supports confident quality decisions This internal dial bore gauge delivers a 0.01 mm readout together with a measured repeatability of 0.02 mm, which provides a reliable basis for go/no-go decisions in inspection routines. The mechanical dial readout avoids electronic drift and is straightforward to interpret on the shop floor, so measurement data can be collected consistently for batch acceptance or setup adjustments. The combination of fine resolution and stable repeatability reduces the need for repeated checks and shortens inspection cycles. Reach and adaptability for deep components With a measuring depth of 1,000 mm and a measuring range of 160–250 mm, the instrument is suited to deep bores, long housings and recessed features that standard gauges cannot reach. The device includes five contact pins Ø8 and passpieces (0.5/1/2/3/6 × Ø11) to match a variety of bore geometries. An extension value of 50 is documented for use with longer setups, allowing safe adaptation to non‑standard component lengths while maintaining alignment and reproducibility. Robust handling and workshop-ready supply The gauge is built on a matt chrome‑plated device holder for corrosion resistance and durable daily use; the overall weight of 1.4 kg balances rigidity with manageable handling. As an analogue instrument it requires no batteries and is simple to maintain, making it a practical choice for production and maintenance departments. Delivery in a protective transport case ensures the gauge arrives ready for immediate use and safe storage between measurement jobs. Classified within the standard measuring band (up to 300 mm), this tool offers the best compromise between reach and stiffness for routine internal measurements. For dependable internal measurements with extended reach, contact Metav Werkzeuge for ordering and technical advice on the Metav IndustryLine inside fine measuring gauge M208.428. Technical data SKU: M208.428 GTIN: 4061905044311 Manufacturer: Metav IndustryLine Facts Measuring range: 160–250 mm Measuring depth: 1,000 mm Resolution: 0.01 mm Repeatability: 0.02 mm Weight: 1.4 kg Readout type: analogue Special features Device holder matt chrome-plated 5× Ø8 measuring pins Passpieces: 0.5/1/2/3/6 × Ø11 Extension: 50 Delivered in protective transport case FAQ How deep can the gauge measure? The inside fine measuring gauge M208.428 provides a measuring depth of 1,000 mm for inspections of deep bores and recessed features. What resolution and repeatability are available? This analogue internal dial gauge offers a 0.01 mm resolution with a repeatability of 0.02 mm, suitable for routine quality control. Are measuring pins and passpieces included? The delivery includes five contact pins Ø8 and passpieces (0.5/1/2/3/6 × Ø11) as specified for the M208.428 instrument. Is the gauge ready for workshop use on arrival? The instrument is supplied in a protective transport case and is ready for immediate use; its matt chrome‑plated holder and 1.4 kg mass favour robust handling in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160-250mm Internal Precision Gauge Retractable Probe, Colour Touchscreen, ISO 17025 Calibrated Wireless+USB - Microtech Metrology
Reliable internal measurement for medium-sized components with ±0.03 mm accuracy and integrated Wireless + USB data output, supplied calibrated to ISO 17025 for traceable results. Order the Internal Fine Measuring Instrument directly via Metav Werkzeuge or ask our consultants if needed. Internal Fine Measuring Instrument — 160–250 mm, Colour Touchscreen (Microtech Metrology) The Internal Fine Measuring Instrument offers high-precision internal measurement for workshop and inspection tasks, ideal for medium-sized bores and assemblies. ISO 17025 calibration certificate included 160–250 mm measuring range Colour 1.54" touchscreen display Wireless and USB data output Precise, traceable results for quality control This instrument delivers consistent measurement performance with a stated accuracy of ±0.03 mm and a fine resolution of 0.0001, ensuring repeatable readings for routine inspection. Supplied fully calibrated to ISO 17025, the unit comes with a traceable calibration certificate that supports documented quality processes and audits. The combination of laboratory-grade calibration and mechanical stability reduces rework and provides a documented measurement basis for production decisions, making it suitable for quality assurance in machine and metalworking environments. Fast data capture and fewer transcription errors Integrated Wireless and USB outputs enable direct transfer of measurement data to inspection software or spreadsheets, accelerating documentation and reducing manual entry errors. The Colour 1.54" touchscreen simplifies menu navigation and on-device checking of values, while the digital interface supports straightforward data logging and integration into existing quality workflows. These features speed up inspection cycles and contribute to a measurable improvement in throughput and process reliability. Built for medium-range internal measurements and workshop use Classified as a Standard range instrument (covers 160–250 mm), this device balances reach with stiffness to suit the majority of workshop tasks, from component bores to assembly checks. The provided measuring depth: 3000 allows access to recessed features common in jigs and housings. Robust construction and a clear digital readout make it practical at the inspection bench and on the production line, while the Microtech Metrology design focuses on repeatability and serviceable electronics for long-term use. For specification advice or to request an ISO 17025‑calibrated unit from Microtech Metrology, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 139250733 GTIN: 4061905045189 Manufacturer: Microtech Metrology Facts Measuring range: 160–250 mm Measuring depth: 3000 Accuracy: ±0.03 mm Resolution: 0.0001 Display: Colour 1.54" touchscreen Special features Data output: Wireless + USB Digital instrument Supplied calibrated to ISO 17025 with certificate ECLASS: 21170310 FAQ Is the instrument delivered calibrated and traceable? Yes. The Internal Fine Measuring Instrument from Microtech Metrology (SKU 139250733) is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceability. What measurement range does this device cover? The instrument covers an internal measuring range of 160–250 mm, making it suitable for standard workshop and inspection tasks requiring medium reach. How can measurement data be exported? Measurement values can be exported via Wireless connection or USB, enabling integration with inspection software and straightforward data logging from the colour touchscreen. What accuracy and resolution can be expected? Expected performance is ±0.03 mm accuracy with a resolution of 0.0001, appropriate for standard quality-control applications in machine and metalworking. Which applications are most suitable for this instrument? The device is intended for internal measurements on medium-sized components, jigs and housings in production and inspection settings, where documented, traceable results are required. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Precision Gauge With Retractable Probe, Colour Touchscreen, ISO 17025 Calibration - Microtech Metrology
Take advantage of ISO 17025 traceability, ±0.025 mm measurement accuracy and wireless data transfer for reliable in‑process inspection. Order the internal measuring gauge directly via Metav Werkzeuge or consult our specialists for integration support. Internal Fine Measuring Gauge 160–250 mm (Microtech Metrology) — ISO 17025 calibrated, Wireless + USB A precision instrument, the Internal Fine Measuring Gauge is engineered for accurate internal diameter inspection in machine shops, toolrooms and quality control laboratories. ISO 17025 calibrated with certificate Wireless and USB data output Colour 1.54" touchscreen display 160–250 mm measurement range Precision and traceability for routine quality control The Internal Fine Measuring Gauge from Microtech Metrology combines a compact, instrument‑grade measuring head with a microcomputer‑based readout to deliver repeatable results. With an accuracy of ±0.025 mm and a display resolution of 0.0001 mm, the device meets demanding workshop requirements; the instrument is supplied fully calibrated to ISO 17025, including a calibration certificate to support traceability and audit documentation. Classified in the Standard measurement class (maximum range up to 300 mm), this gauge balances reach and stiffness for typical machine‑shop components, providing dependable measurements on shafts, bores and precision assemblies. Fast data capture and simple integration into inspection workflows Equipped with Wireless and USB data outputs and a 1.54" colour touchscreen, the unit removes manual transcription and accelerates data logging. The touchscreen offers clear readouts and basic menu control for zeroing, tolerance settings and recording, while wireless transfer enables direct capture into inspection software or statistical process control systems. This combination of digital connectivity and an ergonomic interface reduces cycle time, improves documentation efficiency and eases integration into existing quality procedures. Designed for workshop durability and practical use Built for daily use in industrial environments, the instrument supports deep access with a measuring depth of 2000 mm, making it suitable for a wide variety of internal measurements without complex fixturing. The robust electronics and sealed display assembly provide dependable operation under normal workshop conditions, and the unit’s calibrated status minimises rework by ensuring first‑pass checks are reliable. For production lines, inspection benches or toolmaking, the instrument speeds decision‑making and improves conformity rates while maintaining simple handling for skilled technicians. Contact Metav Werkzeuge today for tailored technical advice, ISO 17025 documentation and procurement of the Microtech internal fine measuring gauge — specialists are available by email or phone to discuss specification and system integration. Technical Data Article number: 139250722 GTIN: 4061905044731 ECLASS: 21170310 Manufacturer: Microtech Metrology Facts Measurement range: 160–250 mm Measuring depth: 2000 mm Accuracy: ±0.025 mm Resolution: 0.0001 mm Special features Digital display: Colour 1.54" touchscreen Data output: Wireless + USB Supplied with ISO 17025 calibration certificate Category: Fine measuring instrument (feinmessgeräte) FAQ What measurement range does the instrument cover? The instrument covers a 160–250 mm measurement range, making it suitable for standard workshop and inspection tasks within that band. Is the device supplied calibrated and traceable? Yes, the Microtech Metrology internal fine measuring gauge is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate. How accurate is the readout? The device provides an accuracy of ±0.025 mm and a display resolution of 0.0001 mm, appropriate for routine quality control and precision inspection. Which data transfer options are supported? Data can be exported via Wireless and USB, enabling straightforward connection to inspection software or data loggers. For which applications is the gauge best suited? The gauge is intended for machine shops, toolrooms and quality control laboratories where internal diameters, bores and precision assemblies require reliable, traceable measurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160-250mm Internal Precision Measuring Instrument With Carbide Faces, 0.015mm Accuracy - Microtech Metrology
Take advantage of high repeatability, carbide measuring faces and a deep 2,000 mm reach for reliable internal inspection across the 160–250 mm band; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Internal precision gauge — analogue instrument with carbide measuring faces (Microtech Metrology) Internal precision gauge for workshop and inspection use, designed to deliver consistent internal measurements across a standard 160–250 mm range with durable carbide contact faces. Carbide measuring faces for wear resistance Measurement range 160–250 mm Measuring depth 2,000 mm for deep bores Consistent accuracy for internal quality control This analogue internal precision gauge provides an accuracy of 0.015 mm with a reading resolution of 0.01 mm, delivering reliable numeric information for inspection and fit checks. The analogue nonius arrangement avoids dependence on electronics in harsh environments, while the fine reading allows technicians to detect deviations that matter for assembly and machining. By combining a fine resolution with a robust mechanical transfer, the gauge supports repeatable results in serial inspection and makes statistical process control more meaningful. Durable measuring faces and extended reach for deep components Equipped with carbide measuring faces, the device resists wear during frequent contact with machined bores, preserving measurement geometry over prolonged use. The 2,000 mm measuring depth permits measurements in deep housings, long sleeves and recessed bores that typical short-reach tools cannot access. This combination of surface hardness and reach reduces rework and saves time by allowing measurements to be taken in situ rather than requiring component re-clamping or transport to a bench instrument. Intended for standard workshop requirements with clear handling benefits Classified for the Standard workshop band, the instrument covers the common internal ranges used in metalworking and fixture construction, from routine checks to more demanding fit tolerances. The 160–250 mm span offers a pragmatic balance between stiffness and reach, making the tool suitable for machine shops, maintenance departments and quality labs that require robustness without excessive complexity. The mechanical design favours stable handling and straightforward interpretation of results, which reduces operator-related variance during frequent measuring tasks. Integration into inspection routines and procurement logic As a precision measuring tool from Microtech Metrology, this analogue gauge fits into existing inspection workflows with minimal training and predictable performance. Its specification supports documentation of dimensional conformity and can be incorporated in routine checks and incoming inspection. For buyers seeking dependable instruments for repetitive internal measurements, the gauge represents a pragmatic choice that prioritises wear resistance and measuring depth while delivering the resolution needed for reliable pass/fail decisions. For tailored advice on applying this Microtech Metrology internal precision gauge in specific production processes or to request further technical documentation, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will help match the tool to the application. Technical data Article number: 132250144 GTIN: 4061905453908 Manufacturer: Microtech Metrology Type: analogue internal precision gauge Category: Fine measuring instruments Core specifications Measuring range: 160–250 mm Measuring depth: 2,000 mm Accuracy: 0.015 mm Reading / resolution: 0.01 mm Display type: analogue (nonius) Materials & features Carbide measuring faces Mechanical nonius Suitable for standard workshop inspection FAQ What measurement range does the instrument cover? The instrument covers an internal measuring range of 160–250 mm, suitable for many workshop inspection tasks. How precise is the analogue reading? The gauge offers an accuracy of 0.015 mm with a resolution of 0.01 mm, enabling fine discrimination for dimensional checks. Are the contact faces durable for frequent use? Yes, the gauge is fitted with carbide measuring faces, which provide high wear resistance during repeated measurements. Can the tool measure deep bores? The design includes a 2,000 mm measuring depth, which permits measurement of deep housings and recessed bores without component relocation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160mm Internal Micrometer Carbide Measuring Faces, 0.003mm Accuracy, 50–160mm Range, Touchscreen Display Wireless/USB - Microtech Metrology
Combining 0.003 mm accuracy with carbide measuring faces and Wireless+USB connectivity, this instrument delivers reproducible internal measurements with clear digital traceability. Order the device directly via Metav Werkzeuge or consult their advisors for integration options. Internal Fine Measuring Instrument — internal bore gauge with 50–160 mm range and 0.003 mm precision (Microtech Metrology) The Internal Fine Measuring Instrument is an internal bore gauge designed for precise inside-diameter inspection in machine shops and laboratory quality control. High resolution 0.003 mm accuracy Wireless and USB data output Carbide measuring faces for durability Consistent high-precision results for quality control With a stated accuracy of 0.003 mm (3 µm), the gauge addresses tasks that require sub-0.01 mm reproducibility and supports narrow tolerance chains in component manufacture. The fine resolution reduces rework and scrap by producing tighter, repeatable inside-diameter readings; this level of precision places the instrument in the high-precision class used for dimensional verification where micrometre-level deviations matter. The combination of a compact measuring head and stable contact geometry helps maintain consistency across repeated measurements. Seamless data capture and process traceability Integrated Wireless+USB connectivity and a 1.54" colour touchscreen enable direct transfer of measurement results to statistical process control or inspection software, removing manual transcription errors and accelerating documentation. The responsive display presents readings clearly and allows basic parameter checks at the point of measurement, while the transfer options permit batch logging or single-point export for traceable records. This connectivity supports efficient workflows and faster reporting in production environments. Durable contact surfaces for repeatable readings The instrument is fitted with carbide measuring faces, which are wear-resistant and sustain contact integrity over prolonged use. Hard-facing on the contact points reduces profile wear when measuring abrasive or harder workpiece materials, so calibration intervals can be extended and measurement drift is minimised. The robust contact material contributes to reliable long-term performance in workshop and toolroom settings. Practical handling for typical workshop ranges Classified as a standard range device, the instrument covers a measuring range of 50–160 mm, offering a balance between reach and stiffness that suits general metalworking, fixture checks and component inspection. A measuring depth of 1000 mm extends the practical use into deeper bores and recesses without losing stability, while the hybrid indication (analogue presence plus digital display) supports users familiar with both reading methods. The design therefore suits operators who need precision, accessibility and straightforward integration into existing inspection routines. Contact Metav Werkzeuge in Emmerich for specification matching, delivery options and integration advice — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: 132160722 GTIN: 4061905454196 Manufacturer: Microtech Metrology ECLASS: 21170310 Facts Accuracy: 0.003 mm Measuring range: 50–160 mm Measuring depth: 1000 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Special features Carbide measuring faces Analogue and digital indication Category: Standard range (50–160 mm) FAQ How precise are the measurements with this gauge? The instrument achieves an accuracy of 0.003 mm, providing micrometre-level resolution suitable for demanding inspection tasks. What data transfer options are available? Measurement data can be exported via Wireless+USB, and the built-in 1.54" colour touchscreen facilitates local review before export. Are the contact faces robust against wear? Yes, the device uses carbide measuring faces, which are designed to resist wear and maintain measurement stability over time. What measuring range and depth does the tool support? The gauge covers a measuring range of 50–160 mm with a measuring depth of 1000 mm, enabling measurements in standard bore sizes and deeper cavities. Is the calibration status specified for this product? The product data does not specify a delivered calibration certificate; calibration details should be confirmed on the product page. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160mm Internal Micrometer With Carbide Measuring Faces, Touchscreen Readout Wireless/USB - Microtech Metrology
Combining a 0.003 mm accuracy, a 50–160 mm measuring range and carbide measuring faces, this internal fine measuring instrument delivers reproducible internal measurements for inspection and machining operations; Order the Internal Fine Measuring Instrument directly via Metav Werkzeuge or ask our consultants if needed. Internal Fine Measuring Instrument — digital internal gauge with 1.54" colour touchscreen and carbide faces (Microtech Metrology) The Internal Fine Measuring Instrument is a precision internal gauge designed for accurate bore and internal-feature measurement in workshops and inspection labs, combining analogue measuring mechanics with a modern colour touchscreen and wireless data transfer 50–160 mm measuring range High accuracy ±0.003 mm Carbide measuring faces for wear resistance Wireless + USB data transfer Precision where measurement certainty matters The device pairs a robust measuring geometry with a reading resolution of 0.0001 mm, resulting in an accuracy of ±0.003 mm suitable for demanding production checks and final inspection. The compact measuring span of 50–160 mm is engineered to cover typical internal diameters found in mechanical assemblies while keeping handling and repeatability optimised. The presence of carbide measuring faces reduces wear effects during repetitive use, thereby maintaining measurement integrity over longer service intervals. This combination of stable contact geometry and fine resolution supports faster decision-making in quality control workflows. Streamlined data handling for quality systems Integrated Wireless + USB connectivity and a 1.54" colour touchscreen enable immediate transfer of measurement results into statistical software or an inspection report. A clear, intuitive display shortens operator cycles and reduces transcription errors, which has a direct effect on throughput and traceability. The instrument’s analogue measuring backbone with digital readout preserves the tactile feedback familiar to experienced technicians while offering the advantages of modern data capture. Compatibility with common data-logging routines allows the instrument to fit into existing QC chains without complex adaptation. Designed for workshop robustness and practical use With a measuring depth of 150 mm and a construction focused on repeatable internal contact, this gauge is well suited to everyday workshop tasks as well as laboratory checks. The design balances rigidity and manoeuvrability so that measurements remain reproducible even when handling small bore components. Where a compact yet precise tool is required for internal diameter control—ranging from prototype evaluation to production sampling—this instrument delivers an effective mix of durability and usability. For specific integration questions or unusual measurement tasks, Metav’s consultants can advise on best practice and fixturing. Discuss measurement requirements or request a tailored recommendation from Metav Werkzeuge for the Microtech Metrology internal gauge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data SKU: 132160700 GTIN: 4061905454141 Manufacturer: Microtech Metrology Core technical data Measuring range: 50–160 mm Measuring depth: 150 mm Resolution / reading: 0.0001 mm Accuracy: ±0.003 mm Display: 1.54" colour touchscreen Special features Carbide measuring faces Data output: Wireless + USB Analogue measuring mechanism with digital readout Category: Fine measuring instruments (internal measurement) FAQ What is the measuring range of this instrument? The measuring range is 50–160 mm, making it suitable for internal diameters common in machining and inspection tasks. How precise are the measurements? The device provides an accuracy of ±0.003 mm with a display resolution of 0.0001 mm, delivering the reproducibility expected for precise internal checks. Which output options are available for data capture? Measurement results can be exported via Wireless and USB interfaces for integration into inspection software or data-logging systems. What material are the measuring faces made from? The instrument is fitted with carbide measuring faces, chosen for their wear resistance and sustained measurement stability under repeated use. Is this instrument suitable for both workshop and laboratory use? Yes. The construction and feature set make it appropriate for everyday workshop controls as well as laboratory inspections requiring reliable internal measurements. Which manufacturer makes this instrument and what is the SKU? The instrument is produced by Microtech Metrology and sold under SKU 132160700. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160–250mm Internal Micrometer Carbide Measuring Faces Color 1.54" Touchscreen Wireless/USB - Microtech Metrology
Take advantage of 5 µm accuracy, carbide measuring faces and wireless data transfer for reliable internal measurements; order the internal fine measuring instrument directly via Metav Werkzeuge or ask our consultants if needed. Internal Fine Measuring Instrument — 160–250 mm range, 0.005 mm accuracy (Microtech Metrology) The Internal Fine Measuring Instrument is a precision tool for internal dimension inspection and component verification in machine shops and quality control environments. Internal measurement range 160–250 mm 0.005 mm high-precision accuracy Carbide measuring faces for wear resistance Wireless and USB data output for traceable records Precision where it counts: consistent 5 µm repeatability Built for applications that demand reproducible internal measurements, this instrument delivers a certified 0.005 mm accuracy across its 160–250 mm measuring range. Classified in the standard segment for calipers and internal gauges, it provides the best compromise between reach and rigidity for general engineering and metalworking tasks. The fine resolution supports dimensional checks on assemblies, bore seats and mating parts, reducing rework and ensuring parts leave the shop within specified tolerances. Efficient data capture and integration for modern workflows A 1.54" colour touchscreen simplifies readout and settings, while Wireless and USB outputs enable fast transfer to inspection software and statistical process control systems. This combination shortens measurement cycles and removes transcription errors, improving throughput and traceability in production environments. The instrument’s electronic interface supports routine data logging and aids audit-ready documentation, turning manual inspection steps into a streamlined data flow. Durable measurement faces and deep probing capability Carbide-tipped contact surfaces ensure long service life even under frequent use, maintaining measurement integrity where softer materials would wear. With a measuring depth of 2000 mm, the device can inspect deep bores and recesses that standard gauges cannot reach, expanding its use to larger fixtures and assemblies. Robust construction and hardened contact points reduce maintenance and support reliable results over time, making it a practical investment for busy workshops. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss how Microtech Metrology’s internal fine measuring instrument can be integrated into existing inspection routines and to arrange purchase or technical consultation Technical data Article number: 132250744 GTIN: 4061905453601 Manufacturer: Microtech Metrology Category: Feinmessgeräte SKU: 132250744 Facts Accuracy: 0.005 mm Measuring range: 160–250 mm Measuring depth: 2000 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Special features Carbide measuring faces Digital readout with touch control Suitable for internal dimension inspection Designed for workshop and QC use FAQ What measurement range does the instrument cover? The instrument covers an internal measurement range of 160–250 mm and is intended for standard workshop and machine‑shop applications. What accuracy can be expected during routine use? Typical accuracy is 0.005 mm; the device maintains high repeatability for dimensional checks and internal fits. How are measurement results exported? Results are exported via Wireless and USB connections for direct integration into quality control systems and data logs. Are the measuring faces durable for heavy use? Yes, the gauge is fitted with carbide measuring faces to resist wear and sustain consistent contact geometry. Can this instrument inspect deep bores? Yes, with a measuring depth of 2000 mm it is suitable for deep internal features and elongated components. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160–250mm Internal Micrometer With Carbide Measuring Faces 0.005mm Accuracy - Microtech Metrology
Take advantage of the combination of 0.005 mm accuracy, carbide measuring faces and a 160–250 mm standard range to increase measurement reliability in daily workshop and quality‑control routines. Order the instrument directly via Metav Werkzeuge or consult our specialists for dimensioning and delivery options. Internal precision gauge — internal fine measuring instrument, 160–250 mm range, 0.005 mm accuracy (Microtech Metrology) The internal precision gauge is an analogue fine measuring instrument designed for accurate internal measurements in machine‑shop and inspection environments, suitable for components within the standard 160–250 mm range. High precision 0.005 mm accuracy Carbide measuring faces for wear resistance Measuring depth 1000 mm for deep bores Standard range: 160–250 mm, workshop ready Precise measurement where tolerances matter The instrument delivers an uncompromising level of dimensional control with a specified accuracy of 0.005 mm (5 µm). Built as an analogue fine measuring tool, it combines a robust mechanical feel with a finely graduated readout to support repeatable checks on internal diameters. The carbide measuring faces provide long‑term resistance to wear, which stabilises results over many measuring cycles. This combination of precision and durability reduces rework and supports consistent production output. Designed for deep and confined measurements With a measuring depth of 1000 mm, the gauge is suitable for long bores and recessed features where standard calipers cannot reach reliably. The instrument’s construction emphasises rigidity and guidance to minimise deflection during measurement, ensuring that readings remain consistent along the full reach. Classified in the Standard length bracket (100–300 mm range), it offers the best compromise between reach and handling for general metalworking and fixture inspection tasks. Workflow advantages and practical handling Analogue operation provides tactile feedback and straightforward integration into existing inspection routines; the mechanical design avoids complex electronics while offering high resolution and dependable behaviour in workshop conditions. The choice of wear‑resistant carbide faces means fewer service intervals and lower lifetime cost for frequently used gauges. Where a documented quality trail is required, Metav Werkzeuge can advise on calibration and traceability options to match internal quality procedures. Fit for shop floor and quality labs This fine measuring instrument suits machining, toolmaking and quality control applications that require tight internal tolerances. Its combination of robust carbide contacts, stable analogue measurement and extended reach makes it an efficient tool for repeat inspection tasks and set‑up checks on assemblies. Backed by Metav’s logistics and product range, the gauge fits into a supply chain that prioritises availability and consistent product quality. For precision projects that demand 5 µm accuracy, contact Metav Werkzeuge to discuss the Microtech Metrology internal precision gauge and arrange supply or calibration advice. Technical Data Article number: 132250822 GTIN: 4061905453748 Manufacturer: Microtech Metrology Facts Measuring range: 160–250 mm Accuracy: 0.005 mm Reading / resolution: 0.001 mm Measuring depth: 1000 mm Analogue instrument: yes Special features Carbide measuring faces Category: Fine measuring instruments ECLASS: 21170310 FAQ What accuracy can be expected from this internal measuring instrument? The Microtech Metrology internal precision gauge (SKU 132250822) is specified with an accuracy of 0.005 mm, providing repeatable measurements suitable for workshop and inspection tasks. Is this instrument suitable for deep bores and recessed features? Yes, the gauge has a measuring depth of 1000 mm, making it appropriate for deep bores where standard calipers cannot reach; the extended reach is designed to maintain stability along its length. What contact material do the measuring faces use and why is it relevant? The measuring faces are made of carbide, which increases wear resistance and preserves measuring accuracy over many cycles—particularly useful in production environments with frequent checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160–250mm Internal Precision Gauge Carbide Faces, 0.005mm Accuracy, Depth 2000mm - Microtech Metrology
Take advantage of ±0.005 mm accuracy together with carbide measuring faces and an extended measuring depth for reproducible internal measurements; order directly via Metav Werkzeuge or request consultancy for application-specific advice. Internal dial bore gauge – Microtech Metrology, analogue system with carbide faces The internal dial bore gauge is an analogue fine-measuring instrument designed for precise internal diameter checks in workshop and inspection environments, covering a measuring span of 160–250 mm with extended reach. High-precision accuracy ±0.005 mm Carbide measuring faces for wear resistance Measuring range 160–250 mm Reading resolution 0.001 mm Reliable dimensional control through quantifiable accuracy This analogue bore measurement instrument delivers a verified ±0.005 mm accuracy, which supports consistent quality control in serial production and incoming inspection. The combination of a fine 0.001 mm reading resolution and a mechanically stable dial mechanism produces clear, repeatable readings; this reduces interpretation uncertainty during manual checks and makes the gauge suitable for tolerance-sensitive assemblies. The specification is oriented towards industrial measurement routines where documented, traceable results matter. Durable contact surfaces that reduce maintenance cycles Equipped with carbide measuring faces, the gauge maintains geometric integrity under frequent contact with workpiece bores. Carbide tips resist abrasive wear far better than standard steel contacts, so calibration intervals lengthen and drift is minimised over time. For maintenance planners and workshop managers this translates into lower lifecycle effort for inspection tools and more predictable process capability data. Designed for medium-range internal measurements and deep bores With a measuring span of 160–250 mm and an effective measuring depth of 2,000 mm, this instrument is positioned between bench-level gauges and long-reach systems: it is compact enough for standard machine-shop workflows yet capable of accessing deep internal features when extensions or long probes are employed. The range makes it appropriate for components such as housings, bearing seats and mid-sized bores where both reach and stiffness are required for reproducible results. Practical integration in inspection routines The analogue dial design facilitates quick, tactile checks during setup or batch sampling without the overhead of digital data handling, while the high resolution supports fine adjustments. Where statistical process control or documentation is needed, results can be recorded manually or transcribed into inspection reports. The construction emphasises robustness and straightforward operation, aiding skilled inspectors who prefer direct reading instruments for rapid decision-making on the shop floor. Request a technical consultation from Metav Werkzeuge to confirm suitability for specific components and to obtain a procurement proposal tailored to the measurement task; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 132250844 GTIN: 4061905453755 Category: Feinmessgeräte Facts Measuring range: 160–250 mm Accuracy: ±0.005 mm Reading / resolution: 0.001 mm Measuring depth: 2,000 mm Special features Carbide measuring faces Analogue dial measuring system Manufacturer: Microtech Metrology FAQ What accuracy can be expected from this internal bore gauge? The internal dial bore gauge offers an accuracy of ±0.005 mm, making it suitable for precision inspection tasks and tolerance checks. Is the gauge suitable for repetitive shop-floor checks of bearing seats? Yes, the analogue bore gauge with carbide faces and a 160–250 mm range is appropriate for repetitive checks of housings and bearing seats in standard machine-shop workflows. What does the 0.001 mm reading resolution imply for daily use? A 0.001 mm resolution gives fine readable increments on the dial, enabling precise adjustment and decision-making during setup and sampling procedures. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160–250mm Internal Precision Measuring Gauge Depth 500mm Readout 0.01mm, Repeatability 0.02mm in Case - Metav IndustryLine
Take advantage of the combination of precise 0.01 mm readings, a 160–250 mm measuring range and a 500 mm measuring depth for reliable internal inspection of bores and recesses; order directly via Metav Werkzeuge or consult the specialists for application advice. Internal dial bore gauge M208.425 — analogue indicator, 160–250 mm range, 0.01 mm resolution (Metav IndustryLine) An Internal dial bore gauge M208.425 designed for precise internal diameter measurement in workshop and inspection environments, suitable for standard machine‑shop tasks and quality control routines. *160–250 mm measuring range for internal diameters *500 mm measuring depth for deep bores *Dial gauge resolution 0.01 mm for fine readings *Repeatability 0.02 mm ensures consistent results Precision that supports production decisions The instrument delivers repeatable measurements thanks to a 0.01 mm dial resolution combined with a verified repeatability of 0.02 mm, which makes it suitable for routine dimensional control and process checks on turned and bored parts. The analogue indicator gives an immediate, continuous reading that is easy to interpret during set‑up and in‑process inspection. This level of precision supports rational decision making by reducing rework and ensuring parts conform to specified tolerances. Reach and geometry for demanding internal measurement With a measuring range of 160–250 mm and a measuring depth of 500 mm, this bore gauge is engineered for components that require access well beyond the face, such as deep housings and sleeves. The gauge features five measuring pins (Ø8) that provide stable contact and minimise tilt, improving the reliability of readings in off‑centre bores. The matt‑chrome device holder offers a corrosion‑resistant mounting point that keeps the probe geometry steady during measurement. Robust design for workshop use and transport Weighing approximately 1.4 kg, the instrument balances rigidity and portability for single‑operator use. The analogue construction reduces dependency on batteries and electronic components, favouring long service life in demanding shop environments. Delivery includes a dedicated transport case for safe handling and secure storage during transfer, preserving calibration and protecting the measuring faces between uses. Practical classification and typical applications Classified in the standard range for internal measuring equipment (covering 100–300 mm), this gauge is intended for general mechanical and metalwork applications where a compromise of reach, stiffness and ease of handling is needed. Typical uses include inspection of bores on housings, set‑up checks on machining centres and first‑piece verification during production runs. The combination of depth and range makes it a flexible option for jigs, fixtures and medium‑sized components. Contact Metav Werkzeuge today to discuss how the M208.425 from Metav IndustryLine can be integrated into existing inspection routines or to request a tailored quotation Technical data Article number: M208.425 GTIN: 4061905044304 Type: Analogue internal dial bore gauge Core measurements Measuring range: 160–250 mm Measuring depth: 500 mm Resolution: 0.01 mm Repeatability: 0.02 mm Weight: 1.4 kg Special features Device holder matt chrome‑plated 5 measuring pins Ø8 Delivered in transport case Analogue dial indicator suitable for workshop use FAQ What is the measurement range of this internal gauge? The measurement range is 160–250 mm for the M208.425, making it suitable for medium‑sized internal diameters. How deep can the instrument reach into a bore? The instrument has a measuring depth of 500 mm, designed for deep housings and longer internal features. What precision and repeatability can be expected? The dial indicator provides a resolution of 0.01 mm with a repeatability of 0.02 mm for consistent routine checks. Is the gauge suitable for everyday shop use? Yes; the analogue construction, matt‑chrome holder and transport case make the M208.425 robust for workshop and inspection environments. How many contact pins are fitted and what diameter are they? The instrument uses five measuring pins, each Ø8, to ensure stable and repeatable contact within the bore. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
165mm Digital Inside Dial Gauge With 0.1mm Resolution, Round Tips, mm/inch Display, On/Off/Set/Hold, Supplied In Case - Metav IndustryLine
Take advantage of the combination of clear digital readout, broad measuring range and reliable repeatability to speed up internal diameter inspection. Order via Metav Werkzeuge or consult the Metav team for specification support. Digital internal probe M209.271 — 12.7–165 mm range, 0.1 mm resolution (Metav IndustryLine) A Digital internal probe M209.271 for precise internal diameter measurement in workshop and production metrology, designed for repeatable readings on bores and recesses. Measuring range 12.7–165 mm Resolution 0.1 mm digital readout mm/inch conversion and Hold function Round probe tips for smooth internal contact Accurate readings for production control The M209.271 is built to deliver consistent, measurable results across a wide span of internal diameters. With a measuring range of 12.7–165 mm and a resolution of 0.1 mm, the instrument reduces interpretation error compared with analogue gauges and accelerates inspection cycles on repetitive tasks. The stated accuracy of ±0.2 mm gives a clear performance benchmark for quality control planning, allowing technicians to compare tolerances against process capability data and adapt downstream checks accordingly. Faster decisions through a clear digital interface A digital display with selectable mm/inch and dedicated On/Off/Set/Hold buttons simplifies measurement routines and shortens operator training time. The Hold function keeps a stable value on screen for recording or transfer, while the quick unit change supports mixed workflows without manual conversion. These features combine to improve throughput and reduce transcription mistakes, which is particularly valuable in busy production areas where speed and traceability matter. Designed for internal surfaces and confined spaces Equipped with round probe tips and a 100 mm probe length, the device is optimised for internal contact on bores, counterbores and recessed features where a smooth tip prevents local marking. The probe geometry ensures reliable seating against internal surfaces, giving repeatable contact points that are essential when assessing mating parts or checking bore concentricity. The instrument’s balance of reach and compactness keeps handling straightforward, even in limited-access applications. Robust fit for workshop routines At approximately 0.7 kg, the instrument offers a steady feel without excessive bulk, suitable for bench use and mobile inspection tasks. The combination of solid mechanical construction and an intuitive digital interface supports consistent measurements across shifts and operators. Integration into established metrology procedures is straightforward: the probe complements standard dial gauge setups and can be used alongside other metrology tools to build a dependable inspection chain that supports audit and production requirements. For specification assistance or to procure the Metav IndustryLine M209.271 digital internal probe, contact Metav Werkzeuge directly via phone or e‑mail for tailored advice and delivery from Emmerich. Technical data Article number: M209.271 GTIN: 4054469184470 Manufacturer: Metav IndustryLine Core technical data Measuring range: 12.7–165 mm Resolution / display step: 0.1 mm Stated accuracy: 0.2 mm Probe length: 100 mm Weight: 0.7 kg Digital display functions: mm/inch, On/Off/Set, Hold Special features Designed for internal measurements Round probe tips for non-marking contact Category: dial gauge / probe for internal measurement Digital readout for simplified reading and recording Suitable for production and workshop inspection tasks FAQ What measuring range does this probe cover? The M209.271 covers a measuring range from 12.7 mm to 165 mm, making it suitable for a wide variety of internal diameters. How fine is the display resolution and what is the accuracy? The display shows values at 0.1 mm resolution and the instrument is specified with an accuracy of ±0.2 mm. Can measurements be read in inches as well as millimetres? Yes, the digital display supports mm/inch conversion via the dedicated function on the unit. Are the probe tips suitable for delicate internal surfaces? The probe is supplied with round probe tips designed to make stable contact while minimising marking on internal surfaces. Is the probe ready for immediate use on the shop floor? The M209.271 is supplied as a digital internal measuring probe with the described functions and is intended for direct use in workshop inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18-160 mm Internal Micrometer Set Carbide Measuring Faces, 0.015 mm Accuracy - Microtech Metrology
Take advantage of precise mechanical measurement, carbide wear resistance and a wide 18–160 mm measuring range for dependable internal checks across production and inspection tasks — order the set directly via Metav Werkzeuge or ask our consultants for application advice. Internal Bore Gauge Set — mechanical internal measuring kit with carbide faces (18–160 mm) by Microtech Metrology The Internal Bore Gauge Set is a mechanical, carbide-tipped precision kit for internal diameter measurement in workshop and inspection environments, designed as a robust alternative to electronic instruments. Carbide measuring faces for long service life Measuring range 18–160 mm in set format Mechanical readout with 0.01 mm graduation Accuracy ±0.015 mm for consistent results Robust internal measurement where repeatability matters A mechanical bore gauge set built for workshop use combines simple handling with long-term reliability. The set format covering 18–160 mm reduces changeover time when checking series of bores, while carbide measuring faces keep contact surfaces dimensionally stable under shop conditions. The mechanical construction is resistant to brief contamination and avoids the downtime associated with sensitive electronics, delivering steady performance during repetitive quality checks. Precision tailored to industrial quality control Resolution of 0.01 mm together with an accuracy of ±0.015 mm places this kit firmly within the needs of standard machine‑shop inspection and incoming parts control. The analogue readout and dial arrangement provide immediately interpretable results without the need for batteries; the visible graduation supports quick pass/fail decisions and statistical recording. Such repeatable readings help keep machining processes within specified tolerances and reduce scrap rates by identifying deviations early. Deep-bore capability and practical workshop operation With a documented measuring depth range of 130–2000 mm, the kit is suitable for deeper bores and components where reach is critical. The set includes a mechanical dial indicator, exchangeable anvils and extension elements, enabling internal, step and depth checks from compact cylinders to longer housings. The overall package emphasises low maintenance and quick set-up, making it a pragmatic choice for toolrooms and production lines that require dependable internal measurement without complex electronics. Choose the Microtech Metrology Internal Bore Gauge Set from Metav Werkzeuge for a durable, workshop-ready solution — contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply. Technical Data Article number: 132160105 GTIN: 4061905454066 Manufacturer: Microtech Metrology Core specifications Measuring range: 18–160 mm Resolution (reading): 0.01 mm Accuracy: ±0.015 mm Measuring depth: 130–2000 mm Analog (mechanical) readout Materials & special features Carbide measuring faces Set configuration (Satz) Includes dial indicator (messuhr) Category: Feinmessgeräte FAQ What measurement range does the kit cover? The kit covers a measuring range of 18–160 mm and is supplied as a set for rapid changeover across that span. What accuracy and resolution can be expected? Resolution is 0.01 mm with an overall accuracy of ±0.015 mm, suitable for standard machine‑shop inspection and quality control. Are the measuring faces durable for regular workshop use? Yes — the kit is fitted with carbide measuring faces, chosen for their wear resistance and longevity in production environments. Does the set include components for deep bores? Yes — the configuration supports measuring depths from 130 to 2000 mm via extensions and the supplied mechanical dial indicator. Which manufacturer makes this product and what is the SKU? The instrument is made by Microtech Metrology and is listed under SKU 132160105 for ordering and reference. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
18-160mm Internal Dial Bore Gauge Set 10mm Dial, 0.01mm Resolution, Repeatability 0.005mm, Supplied in Case - Metav IndustryLine
Take advantage of high repeatability, fine 0.01 mm resolution and a broad 18–160 mm measuring scope for reliable internal measurements in production and inspection. Order the set directly via Metav Werkzeuge or consult the team for application advice. M208.055 Dial Bore Gauge Set — 18–160 mm, 0.01 mm resolution (Metav IndustryLine) The M208.055 dial bore gauge set offers a mechanical solution for precise internal diameter checks across small to medium bores in workshop and production environments High precision repeatability 0.005 mm 0.01 mm resolution dial reading Measuring range 18–160 mm, three inserts Precision where reproducibility matters The kit delivers consistent internal measurements across a wide range thanks to a repeatability of 0.005 mm and a 0.01 mm dial graduation. The mechanical dial translates small positional changes into clear readings on a 10 mm dial face, making it straightforward to compare bores against gauges or drawing tolerances. Such consistency reduces rework and supports quality control routines by ensuring that consecutive checks return compatible values. Ready-to-use set for efficient inspection workflows Configured as a three-piece set covering 18–160 mm via dedicated measuring inserts (18–35 mm, 35–50 mm, 50–160 mm), the kit minimises setup time during batch inspection or maintenance tasks. The modular design allows quick changeover between diameter ranges, which streamlines throughput on the shop floor. The mechanical construction requires no batteries and is well suited for inspection benches and portable measurement stations alike. Built and finished for everyday shop use The gauges are supplied together with a matte chrome-plated device holder, providing a stable interface for repeatable contact pressure and wear resistance in daily handling. The solid construction and clear dial face support reliable readings under workshop conditions, while the overall kit weight of around 2.45 kg balances portability and robustness for routine transport between machines and inspection tables. Practical handling and storage for longevity Designed as a complete set for internal measurement tasks, the package contains three instruments that cover typical bore sizes encountered in engineering and maintenance. The layout simplifies organisation, protects individual gauges during transport and helps keep inspection routines traceable and reproducible. Where rapid comparative checks are required, the dial indication and stable holder markedly reduce operator-induced variability. Contact Metav Werkzeuge for tailored application advice and request the Metav IndustryLine M208.055 dial bore gauge set to secure consistent internal measurements for production and inspection tasks Technical Data Article number: M208.055 GTIN: 4054469104096 Manufacturer: Metav IndustryLine Set contents: 3 internal gauges (ranges 18–35 mm; 35–50 mm; 50–160 mm) Delivery: protective case Facts Measuring range: 18–160 mm Resolution: 0.01 mm Repeatability: 0.005 mm Dial diameter: 10 mm Weight: 2.45 kg Pieces per set: 3 Special features Analog dial display Matte chrome-plated device holder Suitable for workshop and quality control Protective transport case Mechanical operation (no batteries) FAQ What range of diameters does the set cover? The M208.055 dial bore gauge set covers internal diameters from 18 mm to 160 mm using three dedicated measuring inserts. How fine are the readings from the dial? Readings are taken at 0.01 mm increments on a 10 mm diameter dial, with a repeatability of 0.005 mm ensuring consistent comparisons. Is the set suitable for workshop use? Yes, the set is designed for workshop and quality-control environments; the matte chrome-plated device holder and mechanical dial are robust for daily use. How many instruments are included in the set? The package comprises three instruments covering the ranges 18–35 mm, 35–50 mm and 50–160 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18-160mm Internal Micrometer Carbide Measuring Faces Touchscreen Display Wireless/USB - Microtech Metrology
Combine high-precision measurement with robust construction and modern data transfer: the internal bore gauge set offers ±0.003 mm accuracy, carbide measuring faces and Wireless + USB output for seamless data capture. Order the set directly via Metav Werkzeuge or consult our specialists for configuration and delivery options. Internal bore gauge set 18–160 mm — Colour touchscreen and Wireless/USB data output The internal bore gauge set provides precise internal measurements for workshop, toolroom and quality‑control applications, combining a compact colour touchscreen with analogue indication and digital data transfer. High accuracy ±0.003 mm Colour 1.54" touchscreen display Wireless and USB data output Carbide measuring faces for wear resistance Precision that supports dependable quality control Designed for consistent dimensional inspection, this fine measuring instrument delivers an accuracy of ±0.003 mm and a reading resolution of 0.0001 mm, which together ensure reliable repeatability across serial checks. The numerical values state the device’s performance and allow planners to assess process capability and measurement uncertainty; a tighter accuracy figure reduces the need for repeated verification and shortens inspection cycles. Used within standard workshop and quality contexts, the gauge suits comparative checks and tighter tolerance control in machining and assembly operations. Streamlined measurement workflow and traceable data capture A colour 1.54" touchscreen simplifies setup, display switching and immediate readout interpretation, while the combination of analogue indication and digital output supports mixed workflows. Wireless + USB data output enables direct transfer of readings into spreadsheets or quality software, reducing transcription errors and accelerating traceability. The dual-mode readout keeps familiar mechanical cues available while providing modern connectivity for statistical process control and documentation. Durable set coverage for typical workshop ranges Supplied as a set covering 18–160 mm, the instrument meets the common requirements of general machining and inspection tasks in the standard measurement class. The modular configuration and measuring depth 130–2000 mm allow access to deeper bores when extensions are required, supporting components from compact housings to longer cylindrical parts. Carbide measuring faces protect contact areas from wear, maintaining calibration stability over prolonged use and reducing maintenance intervals—benefits that sustain uptime in busy production environments. Discuss specification and availability with Metav Werkzeuge to ensure the set matches the intended application and data workflow; Metav Werkzeuge can advise on delivery and calibration options from their Emmerich facility. Technical Data Article number: 132160705 GTIN: 4061905453823 Manufacturer: Microtech Metrology Facts Measuring range: 18–160 mm Accuracy: ±0.003 mm Resolution: 0.0001 mm Measuring depth: 130–2000 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Analogue readout: yes Special features Carbide measuring faces Supplied as a set Category: fine measuring instruments SKU: 132160705 FAQ What accuracy can be expected from this instrument? The internal bore gauge set specifies an accuracy of ±0.003 mm, suitable for standard workshop quality control and tighter tolerance checks. How are readings exported for documentation? Readings can be exported via the unit’s Wireless and USB interfaces, enabling direct transfer from the instrument into inspection logs or quality software. What measuring range and depth does the set cover? The supplied set covers 18–160 mm and supports measuring depths from 130 to 2000 mm with appropriate extensions. Are the contact surfaces resistant to wear? Yes, the instrument is fitted with carbide measuring faces to increase durability and preserve measurement stability under regular use. Is calibration information provided with the product data? Calibration status is not specified in the provided product data; confirm the required calibration scope before purchase. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Fast, repeatable geometry checks in seconds
Caliper gauges (also referred to as precision calipers or quick-action gauges) are high-efficiency fine measuring instruments designed for precise geometry control in the production environment. Need to verify internal grooves, pipe wall thickness or small bores quickly? These tools deliver reliable results at sampling speed, making them ideal for series production, incoming goods inspection and workshop testing.
How they work and where they belong
The core of these devices is a spring-loaded lever system that applies a defined contact force, so measurements remain repeatable and independent of the operator’s feel. Caliper gauges capture hard-to-reach features — deep internal grooves, notches, freeform surfaces and thin walls — either mechanically or in digital form. Ergonomic one-handed operation allows the workpiece to stay in the machine or on the test table while checks are performed, reducing handling and downtime.
Practical advantages that improve throughput
- Consistent repeatability due to defined contact force, lowering measurement scatter.
- Rapid sampling: geometry checks are performed in the time of a few seconds, reducing cycle times.
- Flexible contact options such as ball, blade or disc contacts, matching different workpiece geometries.
- Choice of robust analog models or digital units with Go/NoGo tolerance indication and interfaces for direct integration into digital quality assurance.
- Ergonomic design that shortens set-up and inspection times, increasing shop-floor productivity.
Metav: a reliable precision partner for industry
Metav combines decades of metrology experience with a broad offering from Emmerich, acting as a quality filter for the European market. With more than 48,000 customers and over 250,000 products, Metav supplies a comprehensive selection of caliper gauges and accessories, helping purchasing managers reduce supplier complexity while securing reliable supply and technical competence.
Summary
Caliper gauges — precision calipers and quick-action gauges — provide fast, repeatable and operator-independent measurements for demanding industrial inspection tasks, delivering measurable gains in throughput and quality control.
FAQ
What makes caliper gauges suitable for deep internal measurements?
The spring-loaded lever system in caliper gauges ensures a defined contact force while specialised stylus geometries (ball, blade, disc) reach deep grooves and notches, enabling precise capture of internal features.
Can digital caliper gauges be integrated into existing quality systems?
Yes. Digital caliper gauges often include tolerance indication (Go/NoGo) and data interfaces, allowing direct connection to digital quality assurance systems for automated logging and analysis.
Which contact form should I choose for thin-walled parts?
For thin or delicate walls, disc or ball contacts minimise local deformation; Metav’s product range lists the available contact geometries so you can match the caliper gauge to the application.
How do caliper gauges maintain operator-independent repeatability?
Defined contact force from the spring-loaded lever system removes variability caused by hand pressure, so caliper gauges deliver consistent measurements across different operators and cycles.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com