ø 5x20 mm Scriber Needle High-Speed Steel - Metav IndustryLine
Compact, wear-resistant marking performance from a hardened tip and a slim shank ensures repeatable results in routine workshop marking; the HSS construction and ø 5 x 20 mm profile combine durability with easy mounting. Order the replacement part directly via Metav Werkzeuge or contact the consultants for application advice. Scribing Needle M240.151.A1 – HSS, ø 5 x 20 mm (Metav IndustryLine) A scribing needle M240.151.A1 designed as a hardened high-speed steel marking tip for reliable metal scribing and simple integration into compatible holders. Durable HSS marking tip Precise ø 5 x 20 mm shank For 240.151-compatible holders Marking accuracy that stays consistent The hardened HSS tip delivers a reliable edge geometry that maintains sharpness under frequent use, reducing the need for early replacement. This means clearer centre lines and reference marks on metal components, which supports reproducible setup and faster downstream processing. The compact ø 5 x 20 mm format keeps the mass low and the centre of gravity close to the holder, improving handling and minimising unintentional deflection during scribing. Robust design for everyday workshop use A solid shank diameter of 5 mm with a 20 mm engagement length provides a stable clamping zone and simple fitment into standard holders. The high-speed steel composition balances toughness and hardness for marking a range of ferrous materials while resisting chipping in normal shop conditions. The compact construction makes replacement straightforward, so production downtime is reduced and toolroom logistics remain efficient. Easy identification and traceability for parts management Small weight and clear identifiers simplify inventory handling: the article is listed under SKU M240.151.A1 and GTIN is available for procurement systems. The modest form factor keeps stores tidy and allows quick swaps on marking fixtures, supporting lean workshop routines. Documentation and image resources are provided for rapid verification before installation, helping to maintain process consistency. For reliable, workshop-grade marking choose Metav IndustryLine’s hardened HSS scribing needle and contact Metav Werkzeuge for personalised advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M240.151.A1 GTIN: 4061905053672 Label: Reißnadel für 240.151 Ø 5 x 20 mm, HSS Facts Diameter: 5 mm Length: 20 mm Weight: 0.01 kg Special features Material: HSS (high-speed steel) Brand: Metav IndustryLine Intended for holder 240.151 Image available FAQ What material is the marking tip made from? The tip is made from HSS (high-speed steel), giving the scribing needle good wear resistance and toughness for routine shop marking. Which holder is compatible with this needle? The needle is intended for use with holders compatible with the 240.151 series; the part is sold under SKU M240.151.A1. How does the ø 5 x 20 mm size affect handling? The ø 5 x 20 mm shank provides a compact, stiff clamping section that improves stability and reduces deflection during marking. Is product identification available for procurement systems? Yes, the item has a GTIN (4061905053672) and the catalog article number M240.151.A1 for straightforward ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
⌀24mm Thread Adapter M8 to M10, 15mm Thick, M8x8mm Thread, M10 - Metav IndustryLine
Take advantage of straightforward thread conversion together with a compact flange form and low mass for reliable fixture adaptation in metrology and workshop applications; order the adapter directly via Metav Werkzeuge or request advice from our consultants if clarification is needed. Thread adapter M8 to M10, Ø 24 mm, 15 mm thickness — Metav IndustryLine Thread adapter M8 to M10, Ø 24 mm, 15 mm thickness provides a simple, robust solution for converting an M8 threaded fixing into an M10 mounting point, ideal for adapting existing fixtures and measuring accessories. Thread adapter M8 to M10 Ø 24 mm compact flange 15 mm thickness for stable mounting Lightweight — 0.2 kg Convert existing fixings without reworking components A dedicated thread adapter simplifies the transition from an M8 fixing to an M10 thread, eliminating the need for re-machining or new tapped holes. The compact Ø 24 mm flange concentrates clamping forces close to the fixing point, which supports consistent seating and repeatability during fixture changes. This conversion is particularly valuable in metrology environments where maintaining datum positions and minimising setup time are essential for production throughput and inspection consistency. Compact geometry that supports stable mounting and repeatable measurement The adapter’s 15 mm thickness and reduced overhang contribute to mechanical stability, helping to keep the mounted element aligned under lateral load. With a mass of 0.2 kg, the component adds minimal inertia to assemblies while still providing a robust interface between different thread standards. These attributes reduce the risk of micro-movements that could otherwise compromise dimensional checks, so the adapter assists in preserving precision throughout repeated tool or gauge changes. Practical inventory management and operational efficiency Standardising on a small range of adapters decreases the variety of specialised fastenings and fixtures in stock, yielding a measurable efficiency gain in procurement and faster changeovers at the bench. The simple function of the adapter—converting M8 threads to M10—offers a cost-effective route to reuse high-value accessories and measuring heads that would otherwise require bespoke adaptors or replacements, supporting lean workshop practices and shorter machine or inspection downtime. Installation guidance and inspection considerations Installation is straightforward: the adapter engages the female M10 receptacle while accepting the M8 fastener, providing a low-profile connection. As a mechanical accessory, the component does not require calibration and is intended for secure mechanical use rather than measurement certification. Regular visual inspection for wear or thread damage is recommended as part of routine maintenance to assure continued reliability and safe operation in industrial use. Contact Metav Werkzeuge today to discuss compatibility with existing fixtures and to order the Metav IndustryLine thread adapter M8 to M10 (SKU M206.110) for quick integration into production or inspection setups. Technical Data Article number: M206.110 GTIN: 4061905053580 Weight: 0.2 kg Dimensions: Ø 24 x 15 mm EClass: 21130112 Facts Thread sizes: M8 → M10 Flange diameter: 24 mm Thickness: 15 mm Mass: 0.2 kg SKU: M206.110 Special features Thread conversion M8 to M10 Compact flange design Low mass for minimal added inertia Reusable mechanical adapter Intended for mechanical fixing/adaptation FAQ Which thread sizes does the adapter convert? The thread adapter converts an M8 fastening to an M10 mounting point, enabling the use of M10 fixtures where only an M8 thread exists. What are the outer dimensions of the adapter? The adapter has a flange diameter of 24 mm and a thickness of 15 mm, as stated for the Metav IndustryLine thread adapter M8 to M10 (SKU M206.110). Is the adapter intended for precision measurement or does it need calibration? This adapter is a mechanical conversion accessory and does not require calibration; it is not a measuring instrument and is used to adapt threads mechanically. How much does the adapter weigh and does the mass affect fixtures? The adapter weighs 0.2 kg; the low mass minimises added inertia while providing a stable interface between thread sizes. Can the adapter be reused for multiple fixture changes? Yes, the adapter is designed for repeated use as a conversion element between M8 and M10 fixings, subject to routine inspection for thread wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com