Limit plug gauge — FAQ and category guide
Explore limit plug gauges for quick, accurate bore size checks. Covers twist drill compatibility, materials, and care tips. Choose the right gauge to boost inspection speed with reliable, user-friendly tools.
0.5-10mm Go/No-Go Drill Gauge Steel - Filetta
Take advantage of accurate diameter checks, a compact 0.5–10 mm range and robust steel construction to streamline drill verification in the workshop. Order the item directly via Metav Werkzeuge or consult our specialists for tailored advice. Drill Gauge MS910.501 — steel drill gauge, 0.5–10 mm range The Drill Gauge MS910.501 is a compact steel gauge designed for rapid identification and verification of drill diameters in workshop, tooling and inspection environments. Robust steel construction Measuring range 0.5–10 mm Steps every 0.1 mm for quick checks Compact size ideal for micro measurements Fast, reliable diameter checks that speed up inspection The instrument enables immediate validation of drill sizes, offering a measuring range of 0.5–10 mm with clear, regular increments of 0.1 mm for fast go/no-go decisions. This makes the tool particularly effective when time is critical: operators spend less time searching for the right drill and more time on machining. The compact form factor supports quick handling at the bench or next to a machine, reducing workflow interruptions and improving throughput. Built for repeatable precision and easy interpretation Constructed from steel for consistent dimensional stability and wear resistance, the gauge provides repeatable checks across many cycles of use. The regular step spacing simplifies visual comparison between the tool and the corresponding gauge slot, which is especially useful when a production line requires fast sampling rather than laboratory-level metrology. The simple mechanical design avoids electronics, so operation remains straightforward and maintenance demands are minimal while preserving dependable performance. Suited to micro work and small-scale quality control With its maximum measuring range of 10 mm, the gauge is classified in the micro category—ideal for fine mechanical and watchmaking tasks as well as routine checks in general machining where small-diameter drills are common. The tool supports quick decision-making during setup and run-time inspections, contributing to consistent part quality and fewer tool-change mistakes. Where traceable calibration is required, consultancy on calibration options can be provided to match workshop quality routines. Contact Metav Werkzeuge for procurement details, calibration options and application advice on the Filetta Drill Gauge MS910.501 — direct supply from Emmerich to the workshop bench. Technical data Article number: MS910.501 Manufacturer: Filetta Type: Drill gauge Facts Measuring range: 0.5–10 mm Step size: 0.1 mm Minimum: 0.5 mm Maximum: 10 mm Special features Material: Steel Application: Drill diameter verification Category: Gauges / Measuring pins FAQ What measuring range does this gauge cover? The gauge covers a range from 0.5 mm to 10 mm, making the Drill Gauge MS910.501 suitable for small-diameter drill checks. How fine are the increments on the gauge? Increments are 0.1 mm, which allows for quick visual checks and straightforward go/no-go comparison when verifying drill diameters. Is the gauge suitable for workshop use or only for metrology labs? Designed for practical workshop use, the Filetta drill gauge provides robust, repeatable checks ideal for bench and production environments. What material is the gauge made from? The gauge is made from steel, selected for dimensional stability and wear resistance under regular inspection cycles. Can the gauge be used during machine setup? Yes, the compact size and clear steps make the MS910.501 convenient for use during machine setup and routine sampling inspections. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1 mm Limit Gauge Pin Go/No-Go Wear Measurement, Hardened Steel, DIN 7162 - Filetta
Benefit from a combination of hardened steel durability and conformity to DIN 7162, with a built‑in wear allowance on the go side that extends service life and maintains repeatable pass/fail decisions; order the limit gauge pin directly via Metav Werkzeuge or consult our specialists for application support. Limit gauge pin – hardened steel, DIN 7162 (Filetta) A limit gauge pin designed for rapid go/no‑go inspection in production and quality control, made to the DIN 7162 standard for consistent interchangeability and long‑term shop‑floor reliability Hardened steel construction Conforms to DIN 7162 Wear allowance on go side Faster pass/fail checks mean fewer production interruptions A compact, standards‑based gauge pin streamlines routine inspection by delivering clear go/no‑go decisions in one motion. The hardened construction reduces micro‑deformation under repeated contact, so checks stay reliable over thousands of cycles. For workshop managers this translates into shorter inspection times and fewer ambiguous measurements, supporting a predictable production flow and faster throughput. Durable design reduces inspection-related rework Built from hardened steel and specified to DIN tolerances, the pin resists wear that would otherwise necessitate early replacement. The incorporated wear allowance on the good (go) side compensates for gradual material loss, extending usable life and postponing recalibration or swap‑outs. Reduced tool turnover lowers maintenance interruptions and helps sustain inspection capacity on busy lines. Standards compliance supports traceability and interchangeability Conformance to DIN 7162 ensures that the pin mates with established limit gauge systems and that measured parts are judged against commonly accepted tolerances. The clear, repeatable geometry of the pin facilitates consistent judgement across operators and shifts, aiding quality documentation and supplier communication. Using standardised gauges simplifies audits and aligns measurement practice with industry expectations Speak to Metav Werkzeuge for application advice or to arrange supply of the Filetta limit gauge pin MS911.158 — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for tailored recommendations Technical data Article number: MS911.158 Product name: Limit gauge pin Material: Hardened steel Standard: DIN 7162 Facts Mass / size designation: 1 SKU: MS911.158 Special features Wear allowance on go side Intended use: Go/no‑go inspection FAQ What is the primary application of this gauge pin? The Filetta limit gauge pin MS911.158 is intended for rapid go/no‑go checks in production and inspection environments, providing a clear pass or fail indicator for bore and pin checks. How does the wear allowance help in daily use? The wear allowance on the go side of the limit gauge pin compensates for gradual surface wear, prolonging the service life and maintaining reliable go/no‑go judgements over extended use. Is the pin compliant with recognised standards? Yes, the limit gauge pin MS911.158 is manufactured to DIN 7162, ensuring compatibility with standard limit gauge practices and facilitating exchangeability between tools. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1 mm Limit Plug Gauge, Wear Allowance On Master Side, Hardened Steel DIN 7162 - Filetta
The combination of hardened steel construction, conformity to DIN 7162 and the built‑in wear allowance on the good side ensures repeatable pass/fail checks and a long service life; order the limit gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Limit gauge pin MS911.200 by Filetta — hardened steel, DIN 7162 The Limit gauge pin MS911.200 is a hardened‑steel limit gauge designed for rapid go/no‑go checks and routine dimensional control in production and inspection environments. Hardened steel construction to DIN 7162 Wear allowance on the good side Precision ground for repeatable checks Compact gauge pin for workshop inspection Reliable pass/fail control for fast inspection The MS911.200 serves as a robust, low‑complexity tool for immediate acceptance decisions on shafts, bores and fitments. Crafted from hardened steel, the gauge gives a clear binary signal—either the pin fits (go) or it does not (no‑go)—so measurement time is reduced and throughput is increased. Conformity to DIN 7162 provides a recognised reference for interchangeability and auditability, while the documented wear allowance on the good side compensates for gradual surface wear without compromising the threshold for rejection. This combination supports consistent quality control across repetitive production tasks. Durable design that reduces maintenance and uncertainty Surface hardening and precision grinding deliver stable contact geometry and precision that endures under frequent use. The hardened material resists abrasion, limiting size drift and extending intervals between replacements. Because the pin is designed with a measured wear allowance, inspection regimes can be planned rather than reacted to—maintenance cycles become predictable, and machine downtime is reduced. The result is fewer interruptions to production and a lower total cost of inspection over the component life cycle. Practical integration into inspection routines Compact and straightforward to handle, this limit gauge pin suits bench inspection, assembly stations and spot checks on the shop floor. Its geometry allows quick visual and tactile confirmation of conformity, supporting lean inspection workflows and minimising operator training. As a plain‑language measuring aid, the gauge complements digital systems by providing immediate, unambiguous results where rapid decisions are required. For customers seeking a balanced mix of durability and ease of use, this solution bridges laboratory accuracy and workshop practicality. For reliable, DIN‑compliant limit gauges from Filetta, contact Metav Werkzeuge for stock availability and tailored advice — Metav's specialists can recommend the correct gauge size and inspection routine for the application Technical data Article number: MS911.200 Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Special feature: wear allowance on the good side Facts Size: 1 SKU: MS911.200 Special features Hardened steel Wear allowance on the good side Precision ground Limit gauge / go‑no‑go function Category: gauges, gauge pins FAQ What material is the MS911.200 made from? The MS911.200 limit gauge pin is manufactured from hardened steel to provide wear resistance and stable contact geometry. To which standard does this gauge conform? This gauge complies with DIN 7162, ensuring a recognised reference for dimensional limits and interchangeability. What does "wear allowance on the good side" mean? The wear allowance indicates that the 'go' side has been dimensioned to permit a measured amount of surface wear before the part reaches the rejection threshold, extending useful life while retaining inspection integrity. For which checks is this limit gauge pin suitable? The pin is intended for go/no‑go acceptance checks on bores, shafts and mating features during production, assembly and incoming inspection. Is the MS911.200 suitable for workshop use or only for lab inspection? Its compact, robust design makes the MS911.200 suitable for both workshop inspection and routine production checks, offering quick, unambiguous pass/fail results. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1.5 mm Limit Gauge Pin Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Take advantage of hardened steel construction, DIN 7162 conformity and a defined good-side wear allowance for reliable go/no-go checks. Order the limit plug gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Filetta Limit Plug Gauge Pin MS911.201 — 1.5 mm, hardened steel, DIN 7162 The Filetta Limit Plug Gauge Pin MS911.201 is a precision gauge pin designed for rapid inspection of bore limits and tolerance checks in accordance with DIN 7162 Hardened steel for durable wear resistance Conforms to DIN 7162 for standardised inspection 1.5 mm diameter for fine bore verification Good-side wear allowance for reproducible results Consistent go/no-go checks that speed up inspection A limit plug gauge pin provides an immediate pass/fail result for internal diameters, eliminating time‑consuming measurement routines where a simple acceptance decision is sufficient. The MS911.201, made from hardened steel, offers stable geometry that minimises elastic deformation during insertion; this ensures that the 1.5 mm diameter remains true across repeated cycles. Conformity with DIN 7162 means the gauge pin fits established inspection protocols and simplifies documentation in quality processes, supporting faster throughput without compromising traceability. Long service life and predictable wear behaviour The design includes a defined good-side wear allowance, which protects the functional limit from premature rejection and allows planned replacement intervals. That wear allowance is documented so that measurement uncertainty remains low over the tool life, leading to fewer unexpected downtimes. The hardened material resists abrasion and preserves the calibrated gauge profile, translating into lower lifetime costs and fewer interruptions to production—an efficiency gain for shop floors and inspection benches alike. Simple integration into workshop and metrology routines These gauge pins are compact, easy to handle and suited to routine checks on small bores in assembly, machining and inspection environments. As a dedicated limit gauge, the item reduces operator decision time compared with micrometre or bore gauge measurements when an acceptance verdict is required. The compact format also facilitates storage in inspection kits and combination sets, supporting organised quality stations and quicker audit preparation. For repeatable bore inspections and standardised acceptance testing, request the Filetta limit plug gauge pin via Metav Werkzeuge’s specialists in Emmerich for tailored advice and reliable supply. Technical data Article number: MS911.201 Manufacturer: Filetta Material: hardened steel Size: 1.5 mm Standard: DIN 7162 Facts Product type: limit plug gauge pin Purpose: go/no-go bore inspection Category: gauge pins / measuring pins SKU: MS911.201 Special features Good-side wear allowance Suitable for routine inspection use Compact, single-diameter gauge pin FAQ What inspection tasks is this gauge pin suitable for? The Filetta limit plug gauge pin MS911.201 is intended for go/no-go checks of internal diameters where rapid acceptance decisions are required, for example in machining and assembly quality control. Does the gauge conform to a recognised standard? Yes, the gauge pin is manufactured to DIN 7162, ensuring compatibility with standardised inspection procedures and easier integration into documented quality systems. What material is the gauge pin made from and why does it matter? The pin is made from hardened steel, which maintains geometry under repeated use and offers good wear resistance, reducing measurement drift and extending service life. How does the good-side wear allowance affect usage? The specified wear allowance protects the functional surface used for the go decision, allowing predictable wear management and planned replacement before measurements become unreliable. Can the gauge pin be used for very small bores? With a 1.5 mm diameter, this gauge pin is intended for fine-bore verification and is suitable for small internal diameters typically encountered in precision engineering components. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1.5 mm Limit Go Gauge Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Combining hardened steel construction, conformity to DIN 7162 and a deliberate wear allowance on the go side, this limit plug gauge delivers reproducible go/no‑go checks and extended service life in routine inspection tasks. Order the gauge directly via Metav Werkzeuge or contact our consultants for application guidance. Limit plug gauge — 1.5 mm, hardened steel (Filetta) A precision limit plug gauge intended for fast go/no‑go inspection of bore tolerances in workshop and production quality control. Hardened steel construction Conforms to DIN 7162 Wear allowance on the go side Precision Ø 1.5 mm Dependable go/no‑go inspection for production The Filetta limit plug gauge is built to provide consistent go/no‑go verification, enabling quick decisions on part conformity during serial production. Manufactured from hardened steel, the mandrel maintains contact geometry under repeated use, which supports reproducible results and reduces rework. Conformity with DIN 7162 ensures the gauge fits established tolerance schemes and can be integrated into existing inspection plans. Using a dedicated gauge pin for marker checks reduces measurement time compared with micrometre setups and simplifies operator training. Designed to resist wear and maintain accuracy A defining attribute is the wear allowance on the go side, which compensates for material loss during service and preserves the functional limit for a longer interval. This design choice delays the need for replacement while keeping the no‑go boundary stable, so inspection reliability is retained across production runs. The compact Ø 1.5 mm size is suitable for small bores and tight tolerances where a stiff, well‑finished pin is required. The result is lower total cost of ownership through extended service life and fewer unscheduled gauge changes. Quick integration into metrology workflows As a standardised gauge pin, this tool fits easily into bench inspection, go/no‑go fixtures and fixture verification routines. The simple geometry makes it suitable for use in pneumatic or manual checking stations and for rapid operator checks on the shop floor. Documentation and process planning benefit from the DIN 7162 reference, enabling clear pass/fail criteria in quality records. For workshops seeking a robust, compact checking instrument, the gauge pin accelerates inspection without sacrificing traceability or repeatability. Specify Filetta limit plug gauges through Metav Werkzeuge to standardise go/no‑go testing; contact our technical advisors at Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical Data SKU: MS911.159 Brand: Filetta Article: Limit plug gauge Facts Diameter: 1.5 mm Material: Hardened steel Standard: DIN 7162 Special features Wear allowance on the go side Category: Gauge pins / limit gauges Application: Go/no‑go inspection FAQ What is the primary use of this gauge? The limit plug gauge MS911.159 (Filetta limit plug gauge) is intended for rapid go/no‑go checks of bore tolerances in production and workshop quality control. What does the wear allowance on the go side mean? The wear allowance provides a designed margin on the go face so the functional acceptance limit remains reliable over prolonged use, extending the service life of the gauge pin. Which standard does the gauge comply with? This gauge conforms to DIN 7162, which defines the geometry and tolerance relationships for plug gauges used in bore inspection. What material is the gauge made from and why? The mandrel is manufactured from hardened steel to ensure durability, stiffness and stable contact geometry under repeated inspection cycles. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
10 mm Limit Go/No-Go Plug Gauge Wear Allowance, DIN 7162 - Filetta
Take advantage of the proven combination of hardened steel construction, DIN 7162 conformity and a clear 10 mm diameter for reliable pass/fail inspection in series production. Order the limit gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Limit Gauge Pin MS911.214 — hardened steel, 10 mm, DIN 7162 A Limit Gauge Pin MS911.214 for fast, repeatable go/no-go checks in workshop and production quality control. Hardened steel construction DIN 7162 compliant 10 mm diameter precision Wear allowance on the go side Consistent pass/fail decisions through standardised geometry The MS911.214 delivers decisive, repeatable results for quick acceptance checks thanks to its precisely ground 10 mm diameter and adherence to DIN 7162. The standardised geometry removes ambiguity in go/no-go inspection and shortens cycle times in quality control routines. As a hardened pin gauge, it is optimised for frequent handling and simple visual verification, so inspection processes become more efficient without added complexity. Robust material and defined wear allowance extend service life Manufactured from hardened steel, the pin resists surface deformation and maintains dimensional stability under continuous use. The specified wear allowance on the go side provides a clearly defined margin for maintenance planning: when the allowable wear is reached, replacement is recommended to preserve measurement integrity. This predictable wear behaviour supports inventory planning and minimises unplanned downtime on the production floor. Practical benefits for workshop and metrology benches Designed for compact and repetitive checks, this limit pin reduces setup time and supports fast inline verification. The simple construction means no electronics or adjustment are required, while the conformity to established standards facilitates integration into existing inspection procedures. For medium- to high-volume verification tasks, the pin contributes to stable quality indicators and easier compliance documentation. For reliable availability and expert advice on Filetta limit gauge pins, contact Metav Werkzeuge in Emmerich — our team can advise on stocking, batch inspection strategies and alternatives for specific applications Technical data Article number: MS911.214 Name: Limit Gauge Pin (Grenzlehrdorne) Manufacturer: Filetta Facts Diameter: 10 mm Material: hardened steel Standard: DIN 7162 Special features Wear allowance on the go side Category: Gauges, Pin gauges Intended use: Pass/fail inspection FAQ What is the primary use of this limit pin? The Limit Gauge Pin MS911.214 is intended for quick go/no-go checks and simple pass/fail inspections of hole diameters and similar features in production and workshop environments. Which standard does the pin conform to? Conformity to DIN 7162 ensures the pin's geometry and tolerances meet recognised metrology requirements for pin gauges. What material is used for the pin and why does it matter? The pin is made of hardened steel, which provides wear resistance and stable dimensions during repeated use, helping to maintain inspection reliability. How does the wear allowance affect maintenance? The specified wear allowance on the go side defines when the pin should be replaced to ensure continued measurement integrity and to avoid accepting out-of-tolerance parts. Is this pin suitable for automated inspection stations? Yes. The simple, robust design and standardised dimensions of the MS911.214 enable integration into automated fixtures or manual verification processes where a fixed go/no-go criterion is required. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
10 mm Limit Plug Gauge Go/No-Go Wear Measure, Hardened Steel, DIN 7162 - Filetta
Limit gauge pins in hardened steel with DIN 7162 conformity and a defined wear allowance ensure reliable go/no-go checking for serial inspection; their compact 10 mm size and robust finish support repeatable measurements across production batches. Order these gauges directly via Metav Werkzeuge or consult our specialists for matching sets and delivery options. Limit gauge pins — hardened steel, DIN 7162 (Filetta) Limit gauge pins for quick go/no-go checking in machining and quality control, designed for repetitive use in workshop and production environments Hardened steel construction DIN 7162 compliant gauging Wear allowance on go side Compact 10 mm diameter Faster, standard-compliant checking for routine quality control The compact gauge pins are engineered for efficient tactile inspection in production. Made from hardened steel, the pins provide a hard-wearing contact surface that resists deformation during repeated use, which reduces rework and inspection downtime. Conformity with DIN 7162 gives a clear normative basis for acceptance testing, so batch checks and go/no-go decisions can be performed with confidence and traceability. The 10 mm dimension ensures compatibility with common bore sizes and gauge holders. Built for longevity with a wear-compensating design A defined wear allowance on the go side extends service life by allowing controlled material loss before replacement is required. This practical design reduces the frequency of recalibration cycles and keeps inspection throughput steady. Precision-ground tips maintain small contact radii for consistent engagement, while the hardened core resists flattening under repeated contact. The result is lower total cost of ownership and predictable maintenance planning. Practical handling and system integration in the workshop The pins are suited to bench gauges, nested holders and manual gauge sets commonly used in metalworking and tool shops. Their compact format and standardised dimensions permit quick swapping and straightforward storage in standard test sets. Where a go/no-go decision is required on an assembly line, these gauge pins accelerate the process and reduce operator uncertainty, supporting both throughput and quality assurance procedures. What to expect from specification and suppliers Manufactured by Filetta, the pins are supplied according to the stated standard and are suitable for routine inspection tasks where a robust, standardised check is required. The product designation and item number simplify reordering: reference MS911.172 for consistent procurement. For those seeking gauge sets or matched pairs, speak with our advisors to confirm tolerances and any special surface finish requirements. Contact Metav Werkzeuge for tailored set configuration or immediate dispatch from Emmerich — our specialists will advise on matching gauges and delivery options Technical data Article number: MS911.172 Product: Limit gauge pins Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Facts Diameter: 10 mm SKU: MS911.172 Special features Wear allowance on go side Precision-ground tip Category: Measuring gauges — gauge pins Suitable for repetitive go/no-go checking FAQ What material are the pins made from? The pins are manufactured in hardened steel, providing a durable contact surface for repeated gauging. Which standard applies to these gauge pins? These gauge pins conform to DIN 7162, ensuring standardised dimensions and acceptance criteria for go/no-go checks. What does the wear allowance on the go side mean? The wear allowance provides controlled material allowance on the go side so the pin remains within acceptance limits for a defined period before replacement is necessary. Can these pins be used for common bore checks? Yes — the compact 10 mm diameter is intended for typical bore and hole checks and integrates with standard holders and sets. How should the pins be referenced when reordering? Use the item number MS911.172 and the manufacturer name Filetta to ensure identical replacement parts are supplied. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
11 mm Gauge Pin Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Reliable 11 mm limit plug gauge manufactured from hardened steel and produced to DIN 7162 ensures consistent go/no‑go inspection and predictable wear behaviour; order directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge MS911.215 — Filetta, 11 mm, hardened steel (DIN 7162) The Limit plug gauge MS911.215 is a precision inspection pin for go/no‑go checks of internal diameters in production and quality control environments. Hardened steel for long service life DIN 7162 standard compliance 11 mm nominal diameter for bore checks Wear allowance on good side Consistent inspection backed by an industry standard This gauge pin delivers reliable, repeatable checks for internal bores, designed to support standardised quality workflows. Manufactured in accordance with DIN 7162, the tool provides a clear reference for pass/fail decisions and integrates readily into established inspection sequences. The 11 mm nominal dimension is presented as a precise measuring reference, and the geometry of the pin minimises wobble during insertion to improve repeatability and reduce measurement scatter in serial inspection. Robust construction for long operational life Made from hardened steel, the pin resists surface damage and maintains its working diameter under frequent use. The design incorporates a wear allowance on the good side, which signals gradual material loss without compromising the functional check; this feature extends usable life while making wear visible during routine inspections. For workshops that demand low downtime, the material choice and finish reduce the need for frequent replacement and support uninterrupted production checks. Practical application and handling in the workshop The plug gauge is intended for quick go/no‑go checks on internal diameters in machining, assembly and incoming inspection stations. Its compact form enables fast handling and clear pass/fail interpretation, supporting efficient throughput without complex procedures. Markings and standard conformity simplify traceability and documentation, while the sturdy construction keeps maintenance straightforward and predictable. The Filetta badge denotes established toolmaking expertise and suitability for industrial environments where dependable gaging is required. For application-specific advice on using this Filetta limit plug gauge and to obtain supply directly from Metav Werkzeuge in Emmerich, contact our team for tailored recommendations and fast delivery Technical data Article number: MS911.215 Manufacturer: Filetta Material: hardened steel Facts Nominal diameter: 11 mm Special features DIN 7162 compliant Wear allowance on good side Application: internal bore go/no‑go inspection Category: gauge pins / plug gauges FAQ What is the primary application of this gauge? The Filetta limit plug gauge MS911.215 is intended for go/no‑go inspection of internal diameters during production and quality control. What does the wear allowance on the good side mean? The wear allowance indicates a deliberate tolerance on the pass side so that gradual surface wear can be detected without immediately affecting the go/no‑go result, extending usable life. Is this gauge compliant with recognised standards? Yes, the plug gauge is manufactured in accordance with DIN 7162, which governs limit gauge design and marking. What is the exact nominal size of the pin? The nominal diameter is 11 mm; reference and tolerance interpretation follow DIN 7162 specifications. Which workshop environments are suitable for this tool? The gauge is suited to machining, assembly and incoming inspection where compact, rapid internal diameter checks are required; its hardened steel construction supports frequent use. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
11 mm Limit Plug Gauge Wear Allowance On Good Side, DIN 7162 - Filetta
Take advantage of precise, fast pass/fail checks and robust wear resistance thanks to hardened steel and DIN 7162 conformity; order the matching gauge pins directly via Metav Werkzeuge or contact our consultants for batch and inspection advice. Limit Gauge Pin — hardened-steel inspection pin, 11 mm, DIN 7162 (Filetta) The Limit Gauge Pin is a hardened-steel inspection pin designed for rapid go/no-go checks and routine dimensional control in workshops and inspection benches, compliant with DIN 7162. Hardened-steel construction for long service life Conforms to DIN 7162 for consistent tolerances 11 mm nominal diameter for standard inspection tasks Wear allowance on the good side to extend usable life Faster, reliable pass/fail inspection for production lines The compact inspection pin delivers quick go/no-go checks that reduce measuring time at control points and on the shop floor. By providing an unequivocal pass or fail condition, the pin supports efficient decision-making in both single-piece inspections and repetitive sampling routines. Conformity with DIN 7162 ensures that the nominal diameter and tolerance band are traceable to an established standard, which simplifies integration into existing inspection protocols and statistical process control. Robust build that minimises downtime Thanks to its hardened steel construction the pin withstands repeated contact without rapid degradation, while the specified wear allowance on the good side preserves the functional limit for longer. This translates into fewer replacements, reduced downtime and lower indirect costs from inspection interruptions. The hardened surface also keeps seating and mating surfaces consistent, helping to avoid false rejects that would otherwise increase rework. Practical benefits for inspection benches and gauge sets As a dedicated inspection pin, the component is optimised for quick handling and straightforward verification tasks on inspection benches and assembly jigs. The clear go/no-go characteristic reduces interpretation time for operators and speeds up routine quality checks. For quality managers the result is measurable: quicker throughput at control stations and a more consistent acceptance rate across batches. Traceability and suitability for regular quality workflows Manufactured to industry standard, the pin supports consistent batch-to-batch performance and straightforward inventory management when used in gauge sets or fixed inspection fixtures. The simple geometry and standardised tolerance regime make the item suitable for assembly audits, incoming inspections and periodic verification of tool wear, providing procurement confidence for maintenance and quality teams. Request technical advice or a batch availability check from Metav Werkzeuge in Emmerich to align delivery options with production schedules Technical Data Article number: MS911.173 Name: Limit Gauge Pin Material: hardened steel Standard: DIN 7162 Measurements / Core data Diameter: 11 mm Features / Applications Wear allowance on the good side Hardened for wear resistance Intended for go/no-go inspection tasks Category: gauge pins / inspection pins FAQ What is the nominal diameter of this inspection pin? The inspection pin has a nominal diameter of 11 mm; this specification applies to the Filetta limit gauge pin (SKU MS911.173). Is the pin suitable for go/no-go checks on assembly lines? Yes, the Filetta limit gauge pin is designed for rapid pass/fail checks and is suitable for routine assembly-line and workshop inspections. What material is used and how does it affect service life? The pin is made from hardened steel, which increases wear resistance and extends usable life compared with untreated pins. Which standard governs the pin’s tolerances? Tolerances and dimensions conform to DIN 7162, providing a recognised reference for inspection procedures. How does the wear allowance on the good side affect inspection practice? The specified wear allowance on the good side allows continued use while preserving the functional limit for a longer period, reducing unnecessary replacements Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
12 mm Limit Gauge Pin With Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Take advantage of the combination of hardened steel construction, DIN 7162 conformity and a built‑in wear allowance on the go side for reliable go/no‑go checks and long service life. Order the limit gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Limit gauge pin – 12 mm, hardened steel (Filetta) The limit gauge pin is a hardened‑steel plug gauge designed for quick go/no‑go diameter checks and conformity inspection to DIN 7162 in workshop and inspection environments. Hardened steel construction Conforms to DIN 7162 for plug gauges 12 mm nominal diameter Wear allowance on the go side Consistent inspection performance for production control The limit gauge pin provides a compact, robust solution for repetitive acceptance checks where consistent tactile feedback and repeatability are required. Made from hardened steel, the pin resists deformation and preserves its tolerance band during frequent handling, so inspection intervals remain predictable. Conformity to DIN 7162 ensures compatibility with established go/no‑go inspection procedures, simplifying integration into existing quality checks and reducing stoppages caused by ambiguous results. Durable design that minimises downtime A hardened, ground construction and the specified wear allowance on the go side extend usable life and enable predictable replacement scheduling. The wear allowance is a deliberate oversize on the good (go) face that compensates for gradual surface loss without affecting the no‑go function; this reduces the risk of false passes and helps keep rework rates low. The simple geometry of a plug gauge also allows rapid manual handling and reduces the time required for routine dimension verification in production and assembly operations. Practical fit for workshop and inspection use Designed for straightforward go/no‑go diameter verification, the pin suits machining workshops, toolrooms and incoming inspection stations where quick, unambiguous checks are needed. The combination of a plain cylindrical form and DIN 7162 standardisation supports easy comparison across gauges and fixtures. Traceability is supported by the clear article designation (MS911.216) and concise specification, so the gauge can be referenced in inspection reports and procurement lists without ambiguity. Contact Metav Werkzeuge for procurement and technical guidance on Filetta limit gauge pins; our Emmerich team provides fast delivery and product advice Technical Data Article number: MS911.216 Name: Limit gauge pin Material: hardened steel Standard: DIN 7162 Specifications Nominal diameter: 12 mm Special features Wear allowance on the go side Hardened and ground construction Intended for go/no‑go diameter checks FAQ What is the primary application of this gauge? The Filetta limit gauge pin (MS911.216) is intended for quick go/no‑go checks of bore and shaft diameters according to DIN 7162 for production and inspection tasks. How does the wear allowance affect use? The built‑in wear allowance on the go side extends service life by compensating for surface wear, so the Filetta plug gauge maintains reliable go/no‑go performance over many cycles. Is the material suitable for workshop handling? Yes, the hardened steel construction of this gauge pin provides resistance to deformation and wear, making it suitable for regular workshop and inspection use. Which standard does the gauge follow and why is that important? Conformance to DIN 7162 ensures the plug gauge meets recognised geometric and dimensional criteria, simplifying its integration into standardised inspection procedures and documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
12 mm Limit Plug Gauge Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Take advantage of robust hardened steel construction and DIN 7162 conformity to secure reproducible bore checks; the built‑in wear allowance on the good side extends service life and simplifies limit interpretation. Order the Filetta items via Metav Werkzeuge or contact our consultants for application advice. Limit plug gauge by Filetta — hardened steel, DIN 7162, Ø 12 mm, G7 Limit plug gauge designed for rapid acceptance checks of internal diameters in production and incoming‑goods inspection Hardened steel for durable measurement Conforms to DIN 7162 standard Wear allowance on the 'go' side Reliable diameter assessment that speeds inspection throughput The limit plug gauge serves as a straightforward go/no‑go check for cylindrical bores, offering rapid verification without complex setup. Machined to a nominal diameter of 12 mm with the designation G7, the pin provides an immediate pass/fail indication that reduces inspection time compared with full dimensional measuring chains. The hardened construction minimises deformation under repeated use, which keeps the checking routine stable and helps maintain production rhythm. For shop floors and control benches where speed and repeatability matter, the gauge translates metrological specification into a clear decision at the point of measurement. Durable design that reduces replacement and downtime Made from hardened steel, the gauge withstands frequent handling and contact with metal workpieces. A specific wear allowance on the good side compensates for gradual material loss, so the go end retains acceptance criteria longer and service intervals are extended. This pragmatic feature lowers life‑cycle costs by delaying the need for reworking or replacement and by keeping inspection standards consistent. The combination of robust material and wear management supports continuous operation in industrial environments where tools are subject to intensive use. Simple integration into quality processes and documentation Conforming to DIN 7162 assists traceability in formal inspection plans and quality records. The plug gauge is suitable for routine acceptance checks in production, final inspection and incoming goods control where clear binary results are preferred. The concise form factor and unambiguous results streamline operator training and reduce human decision variance, which improves overall process capability. When used as part of a calibrated inspection set, the gauge helps to demonstrate compliance and to maintain documented control over critical bore dimensions. Practical benefits for workshop and production use This gauge simplifies everyday metrology: no complex calibration rigs are required for routine use, and the hard wearing surface minimises surface damage to both gauge and workpiece. The compact geometry facilitates access to bores in assemblies and jigged components, while the standardised dimensioning and tolerance marking enable easy cross‑referencing with drawing specifications. For manufacturing teams seeking dependable, low‑effort tools for Go/No‑Go inspection, the pin combines industrial robustness with clear operational benefits. Choose the Filetta limit plug gauge with G7 tolerance via Metav Werkzeuge for dependable in‑process checks; contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS911.174 Product: Limit plug gauge Brand: Filetta Facts Nominal diameter: 12 mm Standard: DIN 7162 Designation: G7 Special features Material: hardened steel Wear allowance on the go side Intended for go/no‑go bore inspection FAQ What size bore is this gauge intended to check? The gauge is supplied as a 12 mm nominal limit plug gauge and is intended for quick go/no‑go checks of bores matching that nominal diameter. Is the gauge suitable for production use on a shop floor? Yes, the hardened‑steel construction and the wear allowance on the good side make the gauge robust enough for routine production and incoming‑goods inspection. How does the G7 designation influence measurement results? G7 is the designation provided with the article and identifies the tolerance fit intended for interpretation against corresponding drawing tolerances when using the plug gauge. Does the gauge comply with industry standards? The item is produced to conform with DIN 7162, facilitating inclusion in standard inspection procedures and documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
12mm Test Pins Set With Holder And Inspection Inserts, Delivered In Tool Trolley - Filetta
Take advantage of precise, repeatable inspection with a comprehensive set that combines hardened steel durability, fine 0.01 mm graduation and clear transport/storage in a tool trolley with a conformity certificate; order the set directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Pin Set MS910.460 — hardened steel, 0.5–12 mm, Filetta The Gauge Pin Set MS910.460 is a complete inspection kit of precision gauge pins for workshop and production metrology, designed for routine go/no‑go checks, dimensional verification and assembly control Extensive set: 1151 gauge pins 0.5–12 mm Hardened steel for high wear resistance 0.01 mm graduation for precise selection Supplied in trolley with conformity certificate Reliable precision for repetitive inspection This set delivers high precision across a broad micro range, covering 0.5–12 mm with a graduation of 0.01 mm, which supports fine incremental selection during inspection procedures. The measured accuracy of 0.002 mm provides a verifiable basis for routine quality checks and contributes directly to stable production outcomes. Using hardened components reduces wear, so nominal sizes remain consistent over repeated use, limiting rework and saving time in the measurement chain. Designed to streamline workshop workflows Presented as a full kit in a purpose‑fitted tool trolley, the collection of pins is organised in individual plastic containers with size marking for rapid retrieval and immediate traceability. The integrated holders with good/reject indication simplify visual sorting and speed up go/no‑go decisions at the bench. These layout and handling choices reduce operator time per check and improve throughput without compromising measurement reliability. Robust handling with traceable conformity Constructed from hardened steel and supplied with a conformity certificate, the set emphasises longevity and documented quality assurance. Individual containers protect each gauge pin from contamination and damage, while the trolley format supports safe transport and tidy storage. The combination of durable materials and documented conformity helps maintain audit readiness and supports consistent measurement results across shifts. Versatile applications across metrology tasks Suitable for inspection, assembly verification and gauge‑based calibration work, the collection is tailored to routine tasks in production, toolmaking and inspection labs. The fine step size enables close fit control and small‑feature checks, while the extensive count of pins in the set covers a wide range of nominal sizes without the need for multiple purchases. The format is particularly useful where rapid switching between sizes and clear go/no‑go indication are required. For hands‑on advice or to secure the Filetta Gauge Pin Set MS910.460 for a stable inspection routine, contact Metav Werkzeuge — our consultants provide practical application support from Emmerich and ensure timely supply to the workshop. Technical data Article number: MS910.460 Name: Gauge pin set Manufacturer: Filetta Material: hardened steel Set: yes Accessories included: 3x holders with good/reject indicator Supplied: tool trolley with conformity certificate Packaging: pins in individual plastic containers with size marking Facts Measurement range: 0.5–12 mm Measurement increment: 0.01 mm Accuracy (nominal): 0.002 mm Pieces per set: 1151 Weight: 63 kg Dimensions (L×W×H): 670×350×540 mm Special features Hardened steel construction Individual marked containers for each pin Tool trolley delivery for transport and storage Conformity declaration included Holders with go/no‑go indicator included FAQ How fine are the increments in the set? The set provides a 0.01 mm graduation between sizes, enabling fine selection for close tolerance checks with the Gauge Pin Set MS910.460. Is the set suitable for repeated industrial use? Yes, the hardened steel pins and protective individual containers make the filetta gauge pin set appropriate for frequent workshop and production use. Does the delivery include documentation? Delivery includes a conformity certificate; the Gauge Pin Set MS910.460 is supplied with documentation confirming its compliance. Can the set be used for calibration tasks? The wide range and fine graduation allow the set to be used for inspection and informal calibration verification; for certified calibration procedures, refer to your internal quality protocols. What accessories come with the set? The set contains three holders with good/reject indication and all pins are housed in individual marked containers within the supplied trolley. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
13 mm Limit Plug Gauge Go Side Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Take advantage of a hardened-steel construction and DIN‑compliant design to speed up bore inspections while keeping wear and rework to a minimum; order via Metav Werkzeuge or request technical advice from our consultants for seamless integration into quality routines. Limit plug gauge – 13 mm, hardened steel (Filetta) The Limit plug gauge is a precision go/no‑go measuring instrument for fast pass/fail inspection of cylindrical bores, designed to the requirements of DIN 7162 and suited to production and workshop quality control. Hardened steel construction Conforms to DIN 7162 Nominal size 13 mm Wear allowance on the go side Fast, reliable pass/fail inspection for production A compact go/no‑go checking method reduces cycle time on the shop floor by eliminating the need for repeated micrometric measurement when a simple acceptance decision is required. The 13 mm nominal gauge provides an immediate binary result for bore conformity, enabling quicker throughput and fewer stoppages. As a result, process control becomes more efficient and repeatable, which directly reduces scrap rates and downstream rework. Robust materials and designed wear compensation Constructed from hardened steel, the gauge resists abrasion and preserves dimensional integrity under frequent use. The built‑in wear allowance on the go side extends service life by permitting controlled material loss before replacement is required, maintaining acceptance criteria without compromising component safety. Compliance with DIN 7162 ensures that inspection results follow a recognised standard, supporting consistent documentation and internal quality audits. Practical fit into workshop and incoming inspection workflows The limit plug fits naturally into routine inspection points—bench checks, incoming inspection of received parts and rapid in‑process verifications—without complex fixturing. Traceability and repeatability are supported through clear identification (SKU MS911.217) and standardised dimensions, simplifying stockkeeping and calibration planning. The straightforward design minimises operator training time and integrates with existing inspection procedures to keep production moving. Contact Metav Werkzeuge in Emmerich for product availability, specification support and tailored advice on integrating Filetta limit plug gauges into existing quality workflows — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: MS911.217 Product name: Limit plug gauge Nominal size: 13 mm Standard: DIN 7162 Facts Material: hardened steel Special feature: wear allowance on the go side Category: plug gauge / limit gauge Special features Manufacturer: Filetta Intended use: pass/fail inspection of bores Application area: production and workshop quality control FAQ What material is the gauge made from? The gauge is manufactured from hardened steel; the Filetta limit plug gauge (MS911.217) therefore offers high wear resistance suitable for frequent checks. Which standard does the gauge follow? Inspection conforms to DIN 7162, so the Filetta limit plug gauge is compatible with industry standard acceptance procedures. How is the gauge used in a workshop routine? The limit plug gauge is intended for quick go/no‑go decisions at incoming inspection, in‑process checks and final control to reduce measurement time and speed up decision making. Does the gauge include any wear compensation? Yes, the design includes a wear allowance on the go side to prolong service life while preserving the acceptance function Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
13 mm Limit Plug Gauge Wear Measurement, Hardened Steel, DIN 7162 - Filetta
Take advantage of a durable inspection solution that combines hardened steel construction, DIN 7162 conformity and a built‑in wear allowance on the good side for predictable lifetime performance; order the Filetta limit gauge pin directly via Metav Werkzeuge or contact our consultants for application guidance. Limit gauge pin MS911.175 — hardened steel, DIN 7162 by Filetta The limit gauge pin is a precision plug gauge designed for fast verification of hole diameters and dimensional conformity in production and inspection environments. Hardened steel for durability Conforms to DIN 7162 standard Nominal 13 mm gauge pin Wear allowance on the good side Fast, reliable checks for hole diameters Limit gauge pins serve as a compact and effective tool for rapid go/no‑go assessment of bore diameters and fits. The MS911.175 from Filetta allows straightforward comparison against tolerance limits, reducing the time spent on intricate measurements and lowering the risk of finishing parts that fail inspection. By applying a simple pass/fail principle, this type of gauge pin supports continuous quality control and streamlines in‑process checks, which in turn improves throughput and reduces rework rates on the shop floor. Robust construction with predictable wear behaviour Manufactured from hardened steel, the pin provides a resistant contact surface that tolerates repeated use in production environments. The specified wear allowance on the good side means that the design accounts for gradual surface loss without compromising the verification function; users gain a longer useful service life and more predictable maintenance intervals. This wear concept avoids sudden losses of conformity and simplifies decisions about replacement or recalibration, delivering tangible savings over the component lifecycle. Standards compliance for traceable inspection routines Conformity to DIN 7162 ensures that the gauge pin integrates with existing metrology routines and adheres to recognised dimensioning rules, facilitating consistent documentation and auditability. The simple form factor makes the component easy to store alongside other inspection tools and easy to use during incoming inspections or final part control. With a clear identification such as MS911.175 and manufacturer provenance, the pin is suited for repeatable batch checks and supports a traceable quality management workflow. For precise bore verification from Filetta, contact Metav Werkzeuge for ordering and tailored application advice — Metav Werkzeuge GmbH is available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to support selection and delivery. Technical data Article number: MS911.175 Manufacturer: Filetta Material: hardened steel Size: 13 mm Standard: DIN 7162 Facts Nominal size: 13 mm Special features Wear allowance on the good side Limit/plug gauge function for go/no‑go checks Category: gauge pins / plug gauges Intended for bore diameter verification FAQ What is the primary use of this limit gauge pin? The limit gauge pin MS911.175 by Filetta is intended for quick go/no‑go checks of hole diameters and basic conformity assessments in production and inspection workflows. Which material is the gauge pin made from? The Filetta gauge pin is made from hardened steel, chosen to provide wear resistance and a stable contact surface for repeated inspections. Does this gauge pin conform to recognised standards? Yes, the component conforms to DIN 7162, which supports consistent dimensional control and integration into documented inspection routines. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
14 mm Limit Gauge Ring Wear Measurement Side, Hardened Steel, DIN 7162 - Filetta
Take advantage of hardened steel construction and DIN 7162 conformity together with a built‑in wear allowance on the good side to secure fast, reliable in-process checks—order the limit plug gauge directly via Metav Werkzeuge or consult our specialists if required. Filetta limit plug gauge Ø14 mm – hardened steel, DIN 7162 The Filetta limit plug gauge serves as a compact go/no-go inspection tool for fast acceptance checks of internal diameters in production and quality control. Hardened steel for long service life DIN 7162-compliant tolerances Wear allowance on the good side Compact Ø14 mm inspection plug Reliable conformity checks for production lines Built for dependable pass/fail assessment, the limit plug gauge combines a simple acceptance principle with standardised dimensions to speed up inspection cycles. The Ø14 mm size suits common bore checks while the DIN 7162 alignment ensures measured dimensions match widely recognised tolerance tables. Using a standardised plug reduces interpretation time on the shop floor and contributes to a smoother production flow. Durability that keeps tools in service longer Manufactured from hardened steel, the gauge resists wear in continuous use and maintains measurement integrity over many cycles. The integrated wear allowance on the good side compensates for gradual abrasion and extends the effective service life before replacement is needed. The result is fewer tool changes, reduced downtime and predictable maintenance intervals for inspection equipment. Fast, unambiguous go/no-go inspection at the bench The plug’s geometry supports quick go/no-go decisions without elaborate setups, making it suitable for workstations, final inspection benches and rapid in-process checks. As a tactile verification tool it removes ambiguity: either the plug enters (go) or it does not (no-go). This simplicity helps standardise checks between operators and increases throughput while keeping quality consistent. Straightforward fit into quality management routines Compact and robust, the gauge integrates easily into existing test fixtures and inspection protocols, supporting traceable quality routines and consistent acceptance limits. Documentation of measured conformity becomes more reliable when using standard gauges, which simplifies audits and reduces the likelihood of customer rejections. The compact design also suits storage in inspection sets and is practical for mobile measuring trolleys. For rapid conformity checks and robust service life, request the Filetta limit plug gauge via Metav Werkzeuge for reliable delivery and targeted technical advice Technical data Article number: MS911.176 Designation: Limit plug gauge Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Facts Diameter: 14 mm Special features Wear allowance on the good side (Abnutzungsaufmaß der Gutseite) Hardened steel Categories: Gauges; Measuring pins FAQ What material is the gauge made from? The Filetta limit plug gauge is made from hardened steel for enhanced wear resistance and long service life. Which standard does this plug gauge comply with? Compliance is with DIN 7162; the Filetta limit plug gauge (SKU MS911.176) follows the standardised tolerancing specified there. What is the intended use for this gauge? Intended for quick go/no-go checks of internal diameters in production and inspection environments, the plug gauge supports rapid acceptance testing. How does the wear allowance affect inspection intervals? The wear allowance on the good side prolongs usable life by compensating for normal abrasion, reducing the frequency of replacements and scheduled downtime. Is this gauge suitable for use on the shop floor? Yes; the compact Ø14 mm size and robust construction make the gauge suitable for bench, mobile trolleys and fixture integration in workshop environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
14 mm Limit Plug Gauge With Go Side Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Reliable, DIN‑compliant inspection for internal bores through a 14 mm hardened‑steel gauge pin with a designed wear allowance on the GO side, ensuring repeated pass/fail decisions remain reproducible; combine durability and standard conformity for consistent quality control. Order the limit plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit plug gauge MS911.218 — 14 mm hardened steel, DIN 7162 — Filetta The limit plug gauge MS911.218 is a DIN 7162‑compliant gauge pin designed for fast pass/fail inspection of internal bores in production and quality assurance environments. Hardened steel construction DIN 7162 14 mm nominal diameter gauge pin Wear allowance on the GO side Ensure decisive, repeatable go/no‑go checks on the shop floor A limit gauge pin like this delivers an immediate binary evaluation for bore acceptance, converting measurement into a clear production decision. Manufactured to DIN 7162, the pin provides a standardised reference, making it simple to compare results across shifts and machines. The hardened‑steel body maintains dimensional integrity under frequent use, while the wear allowance on the GO side extends service life without compromising the accuracy of rejection criteria. This reduces downtime caused by ambiguous results and supports faster throughput in quality control workflows. Robust construction that keeps inspection reliable over time The hardened‑steel construction resists deformation and surface damage, which helps maintain the declared nominal size of 14 mm through repeated cycles. The specified wear allowance is applied to the GO face to ensure that wear first affects the go tolerance before the no‑go limit, preserving measurement intent longer. Such design choices translate into fewer replacements, predictable maintenance intervals and lower total cost of ownership for inspection tooling in industrial environments. Conformity and traceability to support quality systems Built in accordance with DIN 7162, the gauge pin is suitable for integration into documented inspection plans and traceability chains. Using standardised limit gauges simplifies audit preparation and aligns measurements with recognised metrology practice. The simple go/no‑go principle reduces operator interpretation and supports consistent training outcomes—an advantage when multiple operators perform routine inspections on production lots. Practical handling and common applications Compact and robust, this gauge pin is primarily intended for direct checking of bore diameters in assembly, machining and incoming inspection. It works well on toolroom benches and in production control stations where quick verification is required. The pin’s geometry and finish enable smooth insertion into bores, and the hardened material ensures resistance to common shop contaminants. Where repeatability and fast decisions matter, this gauge pin offers a pragmatic balance of durability and simplicity. For traceable, DIN‑compliant inspection equipment, request the Filetta limit plug gauge MS911.218 via Metav Werkzeuge or contact our consultants in Emmerich for precise technical guidance. Technical data Article number: MS911.218 Product: Limit plug gauge (gauge pin) Brand: Filetta Nominal diameter: 14 mm Material: hardened steel Standard: DIN 7162 Special feature: wear allowance on GO side Core measurements Diameter: 14 mm Features and applications Suitable for pass/fail inspection of bores Category: gauge pins / measuring pins Durable, hardened‑steel construction Wear allowance increases service life FAQ What is the primary use of this gauge pin? The Filetta limit plug gauge MS911.218 is used for quick go/no‑go inspection of internal bores to determine acceptance or rejection on the shop floor. What material is the gauge made from and how durable is it? Manufactured from hardened steel, the gauge pin provides high wear resistance; the built‑in wear allowance on the GO side prolongs its effective service life. Is the gauge made to any standard? Yes, the gauge complies with DIN 7162, making it suitable for standardised inspection routines and documented quality procedures. Which nominal size does this article cover? This specific article covers a nominal diameter of 14 mm as marked on the product designation. Can this gauge pin be used in production line sampling? Yes, the robust construction and simple go/no‑go function make MS911.218 appropriate for rapid sampling and routine checks within production and incoming inspection operations. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
15 mm Limit Plug Gauge With Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Benefit from a hardened-steel construction, conformity to DIN 7162 and a defined wear allowance on the GO side for dependable dimensional control; order the limit gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Limit gauge pin MS911.219 — 15 mm hardened-steel limit gauge to DIN 7162 by Filetta The Limit gauge pin MS911.219 is a precision limit gauge pin intended for quick GO/NO‑GO verification and repeatable dimensional checks in production and inspection routines. Hardened steel for stable measurement Conforms to DIN 7162 standard Wear allowance on the GO side Precision 15 mm gauge diameter Consistent conformity for routine inspection A hardened, standardised limit gauge offers a straightforward method to verify part dimensions with minimal interpretation. The MS911.219 is made from hardened steel, ensuring surface durability and stable contact geometry during repeated use. Conformity with DIN 7162 provides an objective reference that supports quality control documentation and helps to reduce false rejections. For workshop environments and inspection benches where speed and clarity are essential, a limit gauge pin delivers a direct binary check that complements more elaborate measuring systems. Robust construction for repeatable results Durability and repeatability are primary considerations for shop-floor gauges. The chosen material and heat treatment yield a contact surface that resists deformation, so checks remain reliable over long production runs. The documented wear allowance on the GO side compensates for gradual surface wear and preserves the intended acceptance criteria; this feature extends service life and maintains measurement integrity between maintenance intervals. As a compact verification tool, the pin requires no auxiliary power and offers an efficient way to protect throughput without adding complexity. Easy integration into inspection workflows Limit gauge pins are inherently low‑complexity instruments that integrate well into production flow, in-line checks and final inspection stages. The compact 15 mm diameter simplifies handling and storage while allowing quick GO/NO‑GO trials at several positions on a component. When used alongside calibrated measurement procedures, these gauges contribute to faster decision-making and fewer production stoppages. Clear marking and standard conformity aid traceability in quality records and make these pins suitable for routine use in mechanical workshops and inspection departments. Practical advantages for purchasing and maintenance Standardised gauges such as this reduce training overhead because their purpose and limits are unambiguous. The solid construction cuts maintenance intervals and the wear allowance on the GO side postpones replacement until a defined criterion is reached, lowering total lifecycle costs. For companies that standardise workbenches, limit gauge pins offer a cost‑effective supplement to calipers and micrometres, serving as quick acceptance checks that keep assembly and machining processes moving. Contact Metav Werkzeuge for technical guidance on integrating the Filetta limit gauge pin MS911.219 into existing inspection routines or to arrange prompt delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MS911.219 Model: MS911.219 Standard: DIN 7162 Facts Diameter: 15 mm Special features Material: hardened steel Feature: wear allowance on the GO side Category: gauge pins / test pins FAQ What inspection tasks suit this type of gauge? Limit gauge pins are intended for quick GO/NO‑GO checks and the MS911.219 by Filetta is well suited to routine diameter verification and reproducible bench checks. Is the MS911.219 suitable for continuous shop‑floor use? Yes, the hardened-steel construction and the specified wear allowance on the GO side make the Filetta MS911.219 appropriate for frequent use in production environments. Does this gauge conform to any standard? The Filetta limit gauge pin MS911.219 is supplied to DIN 7162, enabling consistent acceptance criteria and straightforward traceability in quality documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
15 mm Limit Plug Gauge, Wear Allowance On Go Side, Hardened Steel, DIN 7162 - Filetta
Benefit from the combination of hardened steel construction and conformity to DIN 7162 for repeatable internal diameter checks; the 15 mm nominal size offers a direct fit for standard bores. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge – 15 mm, hardened steel (Filetta) Limit plug gauge for quick go/no-go verification of internal diameters in production and inspection Hardened steel construction Compliant with DIN 7162 standard 15 mm nominal diameter gauge Wear allowance on master side Precision inspection where it matters The limit plug gauge is designed for fast and reliable verification of internal bores in routine quality checks. Manufactured from hardened steel, the gauge offers mechanical resilience that reduces wear and maintains form under repeated use. Conformity with DIN 7162 ensures that the gauge fits established acceptance procedures and inspection protocols, simplifying integration into existing quality workflows. As a result, production lines gain a compact, low-effort control tool that supports consistent pass/fail decisions. Durability and traceable performance A clear technical advantage of this gauge is the incorporated wear allowance on the master side, which prolongs usable life and offers predictable wear behaviour. The material choice—hardened steel—provides resistance to deformation and abrasion, reducing dimensional drift during frequent checks. For workshops and inspection rooms that require robust tools rather than disposable checking aids, this construction translates into fewer replacements and stable measurement outcomes over time, supporting reliable component acceptance. Simple handling for reliable results The gauge’s nominal 15 mm size and compact form factor make it suitable for rapid in-process checks and bench inspection tasks in metalworking and assembly. As a limit gauge, it provides unambiguous go/no-go feedback without needing additional measurement devices, speeding up throughput while keeping control simple. The Filetta item (Article number MS911.177) is particularly suited to operators who prioritise straightforward inspection methods and durable tooling that aligns with recognised standards. For reliable acceptance testing and long-term workshop use, request the Filetta limit plug gauge from Metav Werkzeuge—technical advice and supply are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: MS911.177 Name: Limit plug gauge Brand: Filetta Facts Diameter: 15 mm Standard: DIN 7162 Special features Material: hardened steel Application: internal diameter verification (plug gauge) Special feature: wear allowance on master side Category: Gauges (Measuring instruments > Gauges) FAQ What is the intended use of this limit plug gauge? The limit plug gauge is intended for go/no-go checks of internal diameters in production and inspection; the Filetta gauge MS911.177 verifies whether bores meet the specified acceptance limits. Is the gauge suitable for continuous shop-floor use? Yes, the hardened steel construction of the Filetta limit plug gauge ensures robustness for frequent shop-floor inspections and routine quality control. Which standard does the gauge conform to? The gauge conforms to DIN 7162, meaning it fits standard inspection routines and documented acceptance criteria for plug gauges. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
16 mm Limit Plug Gauge Go, Wear Allowance On Master Side, DIN 7162 - Filetta
Take advantage of a hardened-steel, DIN 7162 compliant design with an integrated wear allowance on the good side to maintain reliable go/no-go checks throughout production. The robust Ø 16 mm construction supports repeatable limit inspection and reduces rework. Order the Filetta limit pin gauge directly via Metav Werkzeuge or ask our consultants for application advice. Filetta limit pin gauge – hardened steel, DIN 7162, Ø 16 mm The limit pin gauge is a precision checking pin for fast go/no-go verification of bores and fits in machine shops and inspection benches. Hardened steel construction Compliant with DIN 7162 Wear allowance on good side Consistent limit checks that keep production moving Designed for straightforward go/no-go inspection, this checking pin offers a compact method to control bore limits without complex setup. The hardened steel body preserves the gauge geometry under repeated use, which improves repeatability and reduces the need for corrective machining. Using a defined limit pin accelerates routine quality checks and shortens inspection cycles, delivering measurable efficiency gains on the shop floor. Built for durability and traceable performance A wear margin on the good side compensates for gradual abrasion, prolonging the service life while keeping functional checks reliable. Compliance with DIN 7162 places the component within a recognised framework for limit gauges, simplifying documentation and audit trails. The robust Ø 16 mm format balances stiffness and handling for frequent tactile checks, enabling quick decision-making at the bench without compromising measurement integrity. Simple handling, clear results for workshop use The geometry of the pin supports immediate tactile feedback in pass/fail inspection: the "go" condition should fit into the bore, while the "no-go" condition must be rejected. This binary outcome removes ambiguity from routine testing and helps maintain throughput. The gauge’s straightforward form factor makes it suitable for integration into existing inspection routines or as a portable verification tool carried between workstations. For specification support or to obtain the Filetta limit pin gauge Ø 16 mm (MS911.178), contact Metav Werkzeuge in Emmerich by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: MS911.178 Name: Limit pin gauge Material: hardened steel Standard: DIN 7162 Facts Diameter: 16 mm Category: gauges / test pins Special features Wear allowance on the good side Hardened material for durability FAQ What is the primary use of this limit pin gauge? The Filetta limit pin gauge (MS911.178) is used for fast go/no-go verification of bores and mating fits on production lines and inspection benches. Does the gauge comply with industry standards? Yes, the Filetta limit pin gauge is manufactured to comply with DIN 7162, ensuring it matches recognised requirements for limit gauges. How does the wear allowance affect long-term use? The built-in wear allowance on the good side extends usable life by compensating for gradual surface wear, keeping checks functionally reliable over time with less frequent replacement. What size is this checking pin and how is it handled? The checking pin is Ø 16 mm and is sized for easy tactile go/no-go inspections; its hardened construction supports repeatable handling in workshop environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
17 mm Limit Go/No-Go Plug Gauge Wear Allowance On Good Side, DIN 7162 - Filetta
Robust compliance with DIN 7162 and the use of hardened steel combine to deliver repeatable go/no-go checks and reduced downtime. The built‑in wear allowance of the good side extends service life and simplifies acceptance routines. Order the gauge directly via Metav Werkzeuge or consult our specialists for application-specific advice. Limit plug gauge (Go/No-Go) – 17 mm, hardened steel by Filetta Limit plug gauge for standard-compliant bore inspection and fast acceptance testing in production and quality control DIN 7162 compliant gauge Hardened steel construction Wear allowance on the good side Consistent compliance for production and inspection The limit plug gauge is designed for rapid, repeatable verification of bore tolerances on the shop floor. Manufactured from hardened steel and produced to DIN 7162, the gauge provides a clear go/no‑go result that speeds up acceptance checks and reduces subjective judgement. The incorporated wear allowance on the good side compensates for gradual material loss, helping to preserve repeatability over many cycles and to maintain inspection accuracy without frequent replacements. Practical robustness that suits serial testing Built for routine use, this gauge combines a simple go/no‑go principle with durable construction. A nominal diameter of 17 mm makes it suitable for nominal bore inspections where quick verification is required rather than dimensional metrology with calipers. The hardened steel material resists abrasion and deformation, ensuring the long service life of the tool even under continuous handling. Traceable marking and the compact form factor support integration into inspection benches and go/no‑go stations. Efficiency through reduced rework and predictable maintenance Using a limit plug gauge aligned to DIN 7162 reduces the time spent on individual measurements and the risk of false rejections, which supports higher throughput and lower rework rates. The explicit wear allowance on the good side gives a predictable maintenance interval, simplifying inventory planning and calibration scheduling. As a Filetta product, the gauge is a pragmatic choice where robust, standards‑based acceptance testing is required and where operational consistency matters more than micrometric adjustment. Contact Metav Werkzeuge in Emmerich for assistance in selecting the right DIN 7162 limit plug gauge and for support with order and delivery: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: MS911.221 Type: Limit plug gauge (Go/No-Go) Manufacturer: Filetta Facts Nominal diameter: 17 mm Standard: DIN 7162 Material: hardened steel Special features Wear allowance of the good side Designed for go/no-go acceptance testing Suitable for serial inspection routines FAQ What is the primary application of this limit plug gauge? The limit plug gauge is intended for rapid acceptance testing of bores; the Filetta limit plug gauge performs go/no-go checks to confirm conformity with nominal bore criteria. Which standard does the gauge comply with? The gauge is manufactured to DIN 7162, ensuring compatibility with common industrial acceptance procedures. What material is the gauge made from and why is that important? Constructed from hardened steel, the gauge resists wear and deformation, preserving the go/no-go function and extending service life under repetitive use. How does the wear allowance affect inspection routines? The included wear allowance on the good side provides a defined margin that delays rejection due to minor surface wear, enabling predictable maintenance and replacement intervals. Is the 17 mm size suitable for serial production checks? Yes; the 17 mm nominal diameter is suited to routine serial inspections where fast go/no-go verification is required rather than detailed dimensional reporting. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
17mm Limit Plug Gauge Go Side Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Combining hardened steel construction, conformity to DIN 7162 and a deliberate wear allowance on the good side delivers dependable limit checking and extended service life in routine inspection tasks; order Filetta limit gauge pins via Metav Werkzeuge or consult our specialists for selection and supply advice. Limit gauge pin by Filetta — hardened steel, DIN 7162 Limit gauge pin designed for Go/No‑Go checks in production and QA environments Limit gauge pin ø 17 mm, hardened steel Conforms to DIN 7162 tolerances Wear allowance on the good side Suitable for plug and pin gauge control Dependable limit checking that stabilises production quality The solid, dimensionally stable construction supports fast, repeatable inspections on the shop floor and in quality control. Built from hardened steel, this pin maintains its nominal size under cyclic use, which reduces the risk of false rejects and rework. Conformity to DIN 7162 provides an objective reference for acceptance testing and helps to harmonise checks across suppliers and production lines, improving throughput and lowering non‑conforming parts per million. Reduced downtime thanks to a wear‑compensated design The integrated wear allowance on the good side extends the usable life of each pin by allowing controlled material loss while preserving the accept signal for Go checks. For maintenance planners and inspectors this means fewer replacements and more predictable tool cycles. The design philosophy emphasises long‑term precision, so inspection intervals can be scheduled on condition rather than by conservative fixed replacement, saving operational time without compromising measurement integrity. Practical suitability for workshop and gauge sets Manufactured for routine limit inspection duties, the pin is compact and straightforward to integrate into existing gauge sets and fixtures. The simple geometry supports quick insertion for plug checks and is compatible with standard bench routines. For technical procurement and production engineering teams, the combination of material choice and standard compliance provides a reliable basis for procurement decisions and spares planning, while Metav Werkzeuge can advise on kit assembly and batch supply options. For specification support or stock availability of Filetta limit gauge pins (MS911.179) contact Metav Werkzeuge for a tailored recommendation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MS911.179 Manufacturer: Filetta Size / Diameter: 17 mm Material: hardened steel Standard: DIN 7162 Special feature: wear allowance on the good side Specifications Diameter: 17 mm Design & Features Category: limit gauge pin / plug gauge Intended use: Go/No‑Go limit checking and quality control Application area: production inspection, incoming goods control FAQ What is this pin used for in production? This limit gauge pin (Filetta, MS911.179) is used for Go/No‑Go checks and routine limit inspections to verify bore and fit dimensions on parts. Does the pin meet a recognised standard? Yes, the Filetta pin complies with DIN 7162, ensuring standardized tolerance classes for limit gauges. How does the wear allowance affect service life? The built‑in wear allowance on the good side prolongs usable life by permitting controlled wear while maintaining the Go limit, reducing replacement frequency. Can Metav Werkzeuge supply matching gauge sets or replacements? Metav Werkzeuge can advise on compatible gauge sets and supply quantities; the Filetta MS911.179 can be ordered as part of a coordinated inspection kit. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
18 mm Limit Gauge Plug, Wear Allowance On Good Side, Hardened Steel, DIN 7162 - Filetta
Take advantage of the combination of hardened steel construction, conformity to DIN 7162 and an integrated wear allowance on the go side for consistent, repeatable inspection results. Order the limit plug gauge directly via Metav Werkzeuge or consult our experts for application advice. Limit plug gauge — hardened steel, DIN 7162, 18 mm (Filetta) Limit plug gauge for precise bore acceptance testing and production line inspection, designed to meet workshop and laboratory needs with a compact nominal size. Hardened steel construction DIN 7162 conformity 18 mm nominal diameter Go side with wear allowance Dependable inspection where tolerances count The limit plug gauge is manufactured from hardened steel to provide a stable reference for go/no-go assessments and routine acceptance checks. Conformity to DIN 7162 ensures that the gauge's dimensions and form meet recognised metrological standards, which supports traceable inspection routines and simplifies documentation. The incorporated wear allowance on the go side extends usable life without compromising the acceptance criterion, so production control remains consistent over many inspection cycles. Practical performance for workshop and production use With a nominal size of 18 mm, this inspection gauge is suited to common bore diameters encountered in component production and maintenance. The compact geometry enables quick insertion checks that are compatible with standard go/no-go workflows, reducing process time while preserving measurement confidence. The plain design permits rapid visual discrimination between acceptable and non‑conforming parts, supporting efficient quality control in both single‑part checks and serial testing. Long service life and straightforward care The hardened steel construction combines durability with minimal maintenance requirements; routine handling and a simple cleaning routine maintain accuracy. The deliberate specification of a wear allowance on the go side means that small, predictable surface wear does not immediately invalidate the gauge, allowing scheduled requalification rather than frequent replacement. For traceable revalidation, the gauge can be included in a regular inspection plan that documents continued compliance with production tolerances. Contact Metav Werkzeuge for a specification sheet, availability or application guidance on this Filetta limit plug gauge (MS911.180) supplied to DIN 7162 standards Technical data Article number: MS911.180 Manufacturer: Filetta Material: hardened steel Nominal diameter: 18 mm Standard: DIN 7162 Facts Nominal diameter: 18 mm Special features Wear allowance on go side Suitable for go/no-go acceptance testing Category: gauges / inspection pins Image available (product thumbnail) FAQ What material is the gauge made from? The Filetta limit plug gauge MS911.180 is manufactured from hardened steel, chosen for wear resistance and dimensional stability. Which standard does the gauge comply with? The gauge is produced to DIN 7162, ensuring compatibility with established metrological expectations for limit gauges. What does the wear allowance on the go side mean? The wear allowance provides a controlled allowance for surface wear on the go face, extending service life while keeping the acceptance limit defined. For what inspection tasks is this gauge suitable? The gauge is intended for go/no-go acceptance testing of bores around 18 mm and for routine quality control in production and maintenance environments. How is the size identified on the product? The nominal diameter is indicated as 18 mm, matching the intended bore acceptance size for straightforward selection and use. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
18mm Limit Plug Gauge Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Taking advantage of a hardened-steel construction and conformity to DIN 7162, this limit plug gauge delivers reliable go/no-go inspection with an integrated wear allowance on the go side; order the Filetta gauge via Metav Werkzeuge or contact our consultants for supply and technical advice. Limit plug gauge MS911.222 by Filetta — hardened steel, DIN 7162 compliant The Limit plug gauge MS911.222 is a precision cylindrical gauge designed for rapid verification of internal diameters to DIN 7162, primarily intended for production control and incoming‑goods inspection Hardened steel construction to DIN 7162 18 mm nominal diameter gauge Wear allowance on the go side Precision gauge for internal diameter checks Consistent conformity through standardised construction The gauge is manufactured in hardened steel, offering dimensional stability and resistance to surface wear for repetitive checks. Built to DIN 7162, the design ensures compatibility with recognised inspection workflows and reduces ambiguity in acceptance criteria. Using a standardised limit plug means that measurement decisions are reproducible between operators and shifts, which helps to lower scrap rates and supports traceable quality routines across production lines. Practical benefit of the wear allowance and go/no‑go function A defined wear allowance on the go side prolongs useful life while maintaining effective pass criteria during routine use. The simple go/no‑go concept embedded in the geometry translates technical tolerance into an immediate decision—acceptable or not—so inspection cycles are faster and less error‑prone than subjective gauging. This functional clarity improves throughput in assembly and inspection stations and makes the gauge particularly suitable for high-volume checks where speed and reliability matter. Integration into inspection routines and fixtures Compact and robust, the instrument is straightforward to fit into gauge stands, inspection benches or assembly jigs for repetitive testing. The nominal diameter of 18 mm is clearly indicated for process documentation and facilitates inventorying of gauge sets. For workshop and production environments where quick verification and clear go/no‑go outcomes are required, this type of limit plug gauge supports consistent part acceptance and contributes to smoother downstream assembly operations. For a reliable supply of Filetta limit plug gauges and tailored advice for inspection setups, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will assist with availability and order details Technical data Article number: MS911.222 Name: Limit plug gauge (Grenzlehrdorne) Manufacturer: Filetta Standard: DIN 7162 Measurements Nominal diameter: 18 mm Materials & features Material: hardened steel Feature: wear allowance on the go side FAQ What is the primary use of this gauge? The Filetta limit plug gauge MS911.222 is used for go/no‑go verification of internal cylindrical bores with a nominal diameter of 18 mm, enabling fast acceptance decisions in production inspection. Which standard does the instrument comply with? Manufactured to DIN 7162, the gauge follows established geometry and tolerance rules for limit plug gauges to ensure comparable inspection outcomes. How does the wear allowance affect service life? The wear allowance on the go side extends the gauge’s operational life by permitting controlled material loss before the no‑go limit is reached, maintaining reliable pass criteria for longer. Is the gauge suitable for fixture integration? Yes, the compact, hardened‑steel design of this limit plug gauge is suitable for mounting in gauge stands, inspection benches and jigs for repetitive testing. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
19 mm Limit Plug Gauge, Wear Allowance On Good Side, Hardened Steel, DIN 7162 - Filetta
Take advantage of a standards‑based inspection tool that pairs hardened steel construction with DIN 7162 conformity and a practical wear allowance on the go side, ensuring reliable pass/fail checks and prolonged service life; order the gauge directly via Metav Werkzeuge or consult our team for application advice. Filetta Limit Plug Gauge G7 – 19 mm, hardened steel (DIN 7162) A Filetta Limit Plug Gauge G7 designed for fast go/no-go verification of 19 mm bores in line with DIN 7162 for consistent production control Hardened steel construction Conforms to DIN 7162 19 mm nominal diameter Wear allowance on the go side Rapid, standards‑compliant inspection that saves time A purpose‑built limit plug gauge provides an immediate quality decision: go/no-go assessment without the need for complex readouts. Conformity with DIN 7162 guarantees the gauge’s dimensions and tolerances match recognised inspection criteria, which accelerates in‑process checks and reduces bottlenecks on the production line. The 19 mm nominal diameter is specified for direct matching to mating bores; using a dedicated gauge for this diameter simplifies sampling plans and shortens cycle time while maintaining clear, auditable acceptance criteria. Robust construction for lasting accuracy Made from hardened steel, the gauge resists wear and maintains geometry across repeated use, which sustains repeatability of results. The design includes a wear allowance on the go side, a planned material margin that can be used to extend the service life before the gauge reaches its limit condition. In practical terms, the wear allowance postpones replacement, lowers lifetime cost, and preserves measurement integrity—critical when inspections are frequent or when a single gauge serves multiple machines or workstations. Easy integration into shop‑floor routines and quality systems The compact, single‑purpose format of this limit plug gauge suits assembly lines, quality control benches and manual inspection jigs. Implementation requires minimal training: the visual or tactile pass/fail outcome reduces interpretation time compared with continuous measuring instruments. For organisations aiming to standardise inspection methods, the gauge fits into existing metrological workflows and documentation. Metav’s position as a precision partner supports straightforward procurement and reliable supply from Emmerich, backed by decades of distribution experience for industrial metrology. Contact Metav Werkzeuge today to confirm suitability and request delivery of the Filetta Limit Plug Gauge G7 (SKU MS911.181); Metav’s advisors in Emmerich will provide practical guidance and rapid fulfilment Technical data Article number: MS911.181 Manufacturer: Filetta Designation: Limit plug gauge G7 Facts Nominal diameter: 19 mm Standard: DIN 7162 Special features Material: hardened steel Wear allowance on the go side Category: gauges / plug gauges / inspection pins FAQ What inspection task is this gauge intended for? The Filetta Limit Plug Gauge G7 (SKU MS911.181) is intended for quick go/no-go verification of 19 mm internal bore dimensions to support routine pass/fail inspection. Which standard does the gauge comply with? This limit plug gauge is manufactured to conform with DIN 7162, ensuring dimensional and tolerance compatibility for standardised checks. How does the wear allowance affect service life? The wear allowance on the go side provides an engineered margin that prolongs usable life by allowing controlled wear before the gauge reaches its limit condition. What material is the gauge made from and why does that matter? The gauge is made from hardened steel, which maintains geometry under repeated use and supports long‑term repeatability of inspection results. Can this gauge be used in automated inspection fixtures? Yes, the solid construction and single‑function geometry of this plug gauge make it suitable for integration into manual and automated fixtures where a 19 mm go/no-go check is required. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Ensure Accurate Fits with a Limit Plug Gauge
A Limit Plug Gauge is a simple and reliable tool for verifying the Internal Diameter of Holes against Specified Tolerance Limits. It is used to check whether a Bore Accepts the Go Side and Rejects the No-Go Side, ensuring Components meet Drawing Requirements in Production and Inspection. These Gauges support fast, repeatable checks that integrate seamlessly into Quality-Control Workflows.
How a Limit Plug Gauge Guarantees Fit and Function
The Limit Plug Gauge serves as a go/no-go reference for Assembly and Manufacturing Processes. By using a matched pair or double-ended Gauge, an Operator can assess whether a Bore lies within the Upper and Lower Tolerance without complex Measurement Devices. Typical Use Cases include Batch Inspection, Final Part Verification and In-Process Controls on CNC Lathes and Milling Machines.
Practical Advantages for Production and Quality Teams
Manufacturing Teams benefit from clear pass/fail results that reduce Downtime and speed up Decision Making. Routine use of Calibration and periodic recheck maintains Measurement Integrity and reduces Scrap Rates. For small Workshops as well as high-volume Lines, a Limit Plug Gauge delivers an efficient shortcut to confirm critical Fits.
What Makes These Gauges Effective in Real Conditions
Gauges are produced from Hardened Steel or Corrosion-Resistant Alloys and often receive a Ground Finish to ensure Long Service Life. The Design reduces Operator Influence: a Go fit should enter smoothly, a No-Go fit must not. Regular Calibration against Traceable Standards preserves Accuracy and supports Audit Requirements.
Key Features That Matter for Purchase Decisions
- Measurement Accuracy: Manufactured to tight tolerances for consistent results
- Material & Hardness: Hardened Steel or Stainless options for Durability
- Design Variants: Single-ended, Double-ended or Threaded versions for specific Tasks
- Ease of Use: Clear Go/No-Go indication for rapid Inspection
- Traceability: Calibration Certificates available to meet Quality Standards
Why Choosing the Right Gauge Improves Outcomes
Selecting a robust Limit Plug Gauge reduces Rework and ensures Component Compatibility during Assembly. Choosing a Gauge from a Respected Manufacturer enhances Reliability and simplifies Compliance with Customer and Regulatory Requirements. Periodic Service and Calibration keep Gauges within Specification and protect Product Integrity.
Quick Summary of Limit Plug Gauge Benefits
In short, the Limit Plug Gauge provides fast, unambiguous verification of Bore Tolerance, supporting consistent Quality and smoother Production Flow.
Final Recommendation and Support Offer
For reliable results, pick Gauges from established Manufacturers and schedule regular Calibration and Maintenance. If you need assistance choosing the right Gauge for your Application, our Technical Service can advise on Material, Size Range and Traceability Options to match your Quality Objectives.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com
FAQ
What is a limit plug gauge and how is it used? A limit plug gauge is a precision inspection tool used to check the internal diameter of holes against specified tolerances. It typically comes in go/no-go form to quickly verify whether a bore is within acceptable limits during quality control or production processes.
Can a limit plug gauge be calibrated and maintained for long-term accuracy? Yes, a limit plug gauge can be calibrated and maintained to ensure long-term accuracy. Regular calibration against traceable standards, proper cleaning after use, and storage in a protective case will help preserve measurement integrity.
How do I choose the right gauge tolerance for my application? Choose a gauge tolerance based on the engineering drawing specifications and the acceptable manufacturing variation. Consider the function of the part, fit requirements, and inspection frequency when selecting tolerance levels.
What materials are limit plug gauges typically made from and do they resist corrosion? Limit plug gauges are commonly made from hardened steel or stabilized alloys for wear resistance. For enhanced corrosion resistance, gauges may be coated or made from stainless materials depending on the supplier and application needs.